NetKey
®
Category 5e U/UTP Copper Cable
D A T A S H E E T
Category 5e cable meets ANSI/TIA-568-C.2 Category 5e and ISO 11801 2nd Edition Class D channel standards.
The conductors are 24 AWG copper insulated with
HDPE polymer. The copper conductors are twisted in pairs and all four pairs are covered by a low smoke zero halogen or flame retardant PVC (CM or CMR) jacket.
t e c h n i c a l i n f o r m a t i o n
Electrical performance:
Conductor/insulator:
Flame rating:
PoE compliance:
Installation tension:
Temperature rating:
Cable jacket:
Cable diameter:
Cable weight:
Packaging:
Certified performance in a 4-connector configuration up to 100 meters, meets ANSI/TIA-568-C.2 Category 5e and ISO 11801 2nd Edition
Class D channel requirements
24 AWG solid copper insulated with HDPE polymer
LSZH – IEC 60332-1, 60754-1, 60754-2, 61034-2
PVC (CM) – UL 1685
PVC (CMR) – UL 1666
Meets IEEE 802.3af and IEEE 802.3at for PoE applications
110N (25 lbf.) maximum
0° to 50°C (32° to 122°F) during installation
-20° to 60°C (14° to 140°F) during operation
LSZH – Low Smoke Zero Halogen
CM – PVC
CMR – Flame retardant PVC
LSZH – 4.7mm (0.187 in.) nominal
PVC (CM), PVC (CMR) – 4.6mm (0.184 in.) nominal
LSZH – 9 kg/305m (20 lbs./1000 ft.)
PVC (CM) – 8 kg/305m (18 lbs./1000 ft.)
PVC (CMR) – 8.5 kg/305m (19 lbs./1000 ft.)
305m (1000 ft.) easy-pay-out box
LSZH – 11 kg/305m (23 lbs./1000 ft.)
PVC (CM) – 10 kg/305m (21 lbs./1000 ft.)
PVC (CMR) – 10.5 kg/305m (22 lbs./1000 ft.)
Packaged tested to ISTA procedure 1A k e y f e a t u r e s a n d b e n e f i t s
Third party tested
Descending length cable markings
Easy payout box
Cable has been tested as part of the NetKey ® Category 5e UTP Copper
Cabling System by an independent laboratory and complies with the electrical channel requirements of the following standard:
ANSI/TIA-568-C.2 Category 5e standard
Easy identification of remaining cable reduces installation time and cable scrap
Ensures proper performance and provides quick installation a p p l i c a t i o n s
Applications include:
• Ethernet 10BASE-T, 100BASE-T (Fast Ethernet), and 1000BASE-T (Gigabit Ethernet)
• 155 Mb/s ATM, 622 Mb/s ATM, 1.2 Gb/s ATM
• Token ring 4/16
NetKey ® Network Components
NetKey ® UTP Copper Cable
LSZH:
CM:
CMR:
NUL5C04BU-C*
NUC5C04BU-C*
NUR5C04BU-C
NetKey ® Category 5e UTP
Jack Module
Punchdown:
Leadframe:
NKP5E88MIW**
NK5E88MIWY**
NetKey ® Category 5e UTP Patch
Cords – CM
Foot lengths:
Meter lengths:
NK5EPC3^Y
NK5EPC1M^^Y
NetKey ® Category 5e Punchdown
Patch Panels
12-port:
24-port, 1 RU:
48-port, 2 RU:
NK5EPPG12WY
NK5EPPG24Y
NK5EPPG48Y
NetKey ® Category 5e All Molded
Punchdown Patch Panels
24-port, 1 RU:
48-port, 2 RU:
NK5EPP24P
NK5EPP48P
NetKey ® Flush Mount Modular
Patch Panels
Angled, 24-port,
1 RU:
Angled, 48-port,
2 RU:
NKPPA24FMY
NKPPA48FMY
Flat, 24-port, 1 RU: NKPP24FMY
Flat, 48-port, 2 RU: NKPP48FMY
NetKey ® Category 5e All Molded
Modular Patch Panels
24-port, 1 RU:
48-port, 2 RU:
NKPP24P
NKPP48P
Termination and Cable Prep Tools
JackRapid ™
Termination Tool:
Conductor snipping tool:
Conductor stripping tool:
JR-PAN-2
CWST
CJAST
*For standard cable colors other than BU (Blue), replace BU in part number with WH (White) or
IG (International Gray). Contact customer service for region availability. Standard pallets are configured in
4 layers, 9 cartons per layer, total of 36 cartons per pallet. Add E to end of part number for European pallets which are configured in 4 layers, 6 cartons per layer, total of 24 cartons per pallet.
**For standard colors other than Off White (IW), replace suffix with EI (Electrical Ivory), IG (International
Gray), WH (White), BL (Black), BU (Blue), RD (Red),
YL (Yellow), GR (Green) or VL (Violet). Add -Q to end of part number for 25 pack convenience package.
^For standard foot lengths other than 3 feet, replace the 3 in the part number with 5, 7, 10 14 or 20. For standard colors other than Off White, add suffix BU
(Blue), RD (Red), YL (Yellow) or GR (Green) before the
Y at the end of the part number. For example, the part number for a blue, Category 5e 5-foot patch cord is
NK5EPC5BUY.
^^For standard meter lengths other than 1 meter, replace the 1 in the part number with 2, 3, 4 or 5. For standard colors others than Off White, add suffix BU
(Blue), RD (Red), YL (Yellow) or GR (Green) before Y at the end of the part number. For example, the part number for a blue, Category 5e, 5-meter patch cord is NK5EPC5MBUY.
Fluke JackRapid ™ Termination Tool available through distribution. To locate the local office, visit www.flukenetworks.com/contact. JackRapid trademark of Fluke Networks.
™ is a w w w. p a n d u i t . c o m
NetKey
®
Category 5e U/UTP Copper Cable
a d d i t i o n a l s p e c i f i c a t i o n s
Mechanical Test
Ultimate Breaking Strength
Minimum Bend Radius
Electrical Test
Nominal Velocity of Propagation (NVP)
>400 N (90 lbf.)
4 x cable diameter
65% c a b l e c o n s t r u c t i o n
Jacket
Conductor Wire
Conductor Insulator
Rip Cord
PANDUIT CANADA
Markham, Ontario [email protected]
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK [email protected]
Phone: 44.20.8601.7200
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore [email protected]
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan [email protected]
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Guadalajara, Mexico [email protected]
Phone: 52.33.3777.6000
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
Visit us at www.panduit.com
Contact Customer Service by email: [email protected]
or by phone: 800.777.3300
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia [email protected]
Phone: 61.3.9794.9020
© 2012 Panduit Corp.
ALL RIGHTS RESERVED.
NKDS30--WW-ENG
Replaces WW-NKDS12
12/2012
