owner`s manual
OWNER’S MANUAL
OPERATING INSTRUCTIONS
CONGRATULATIONS!
P
S
T
R
Thank You For Choosing Wi Digital Systems.
Congratulations on your purchase of the Wi AudioStream Pro AV 2.4GHz Smart Pocket Portable Stereo Digital
Wireless Lavalier & Audio Monitoring System with 2-Way Wireless USB 2.0 Audio Interface.
Please thoroughly read this User’s Manual for all the feature operation information necessary
to install and operate your new Wi AudioStream Pro AV system.
Notice: Product specifications and package contents are subject to change without notice.
Package contents may vary according to the different regions.
For additional support, please visit www.widigitalsystems.com
A
2
S
W
M
F
W
TABLE OF CONTENTS
-----------------------------------------------------------------------------------------PACKING LIST5
-----------------------------------------------------------------------------------------SYSTEM CHARGING & PAIRING6
TRANSMITER MICROPHONE SETUP
-----------------------------------------------------------------------------------------• MONO LAVALIER SETUP8
-----------------------------------------------------------------------------------------• TRANSMITTER PLACEMENT11
-----------------------------------------------------------------------------------------• OPTIONAL STEREO LAVALIER SETUP12
-----------------------------------------------------------------------------------------• OPTIONAL EARSET SETUP14
-----------------------------------------------------------------------------------------• OPTIONAL SHOTGUN SETUP18
RECEIVER SETUP
-----------------------------------------------------------------------------------------• CAMERA CONNECTION20
-----------------------------------------------------------------------------------------• SMARTPHONE CONNECTION22
-----------------------------------------------------------------------------------------• TABLET & SMART DEVICE CONNECTION
26
-----------------------------------------------------------------------------------------• SOUND SYSTEM CONNECTION28
-----------------------------------------------------------------------------------------AUDIO MONITORING30
-----------------------------------------------------------------------------------------2-WAY USB 2.0 WIRELESS AUDIO INTERFACE32
-----------------------------------------------------------------------------------------• MAC & PC USB SETUP34
-----------------------------------------------------------------------------------------• iPad, Surface & Tablet PC USB SETUP
38
-----------------------------------------------------------------------------------------• AUDIO LISTENING, VoIP & PODCASTING
40
-----------------------------------------------------------------------------------------SMART DEVICE DIRECT MIC CONNECTION42
-----------------------------------------------------------------------------------------WI TRANSMITTER & RECEIVER FEATURES44
-----------------------------------------------------------------------------------------MICROPHONES FEATURES58
-----------------------------------------------------------------------------------------FCC NOTICE & RECYCLING INFO62
-----------------------------------------------------------------------------------------WARRANTY64
TECHNICAL SUPPORT
Getting Answers!
We want you to get the most from your new Wi AudioStream Pro AV stereo digital wireless audio system!
Simply logon to www.widigitalsystems.com and access the resources available online including
instructional manuals and more.
Our customer service support staff are ready to assist you with any question you may have.
Your Wi AudioStream Pro AV comes with one year of telephone support and service coverage.
W
There are several ways to contact Wi Digital Systems customer service support.
E-Mail:[email protected]
Website:www.widigitalsystems.com/support
Technical support:
(714) 505-4567
U
1
PACKING LIST
Wi Transmitter
Wi Receiver
Wi SmartMic™ Lavalier with
Omnidirectional Microphone Capsule
Single Feed
Universal USB 1/4”-20 Camera
1/4”-20
AC Charger Hot Shoe Adapter Smartphone Adapter Cable Clips
1/8” to 1/8” TRS Stereo
Cable & 1/4” Adapter
XLR to 1/8”
TRS Cable
USB
Data Cable
Smartphone
Mounting Adapter
1/8” to 1/8” TRS
Smart Device Cable
MIC/Headphone
MIC
Adapter
Windscreens
USB Y-Split
Power Cable
Hard Shell
Carrying Case
5
CHARGING
Charging The System
AC Charger
USB Connector
Before using your new Wi AudioStream™ Pro AV digital wireless system,
you need to fully charge the batteries for approximately 2 hours.
T
f
t
1. Plug the AC Charger into a power socket.
2. Connect the USB power cable to the USB port on the AC charger.
3. Connect one of the two mini USB connectors to the Transmitter
USB port.
4. Connect the second mini USB connector to the Receiver USB port.
5. The Power/Status LED will turn to solid Red ON.
6. When charging is complete the Red LED will turn OFF.
The system’s power source’s flexible design boasts 4 power options:
• 4~6 hours internal rechargeable battery use.
• 13 hours with USB AA battery adapter (optional accessory).
• Continuous use with AC power adapter.
• Continuous use with USB port bus power.
6
P
1
USB Port
2
K
LIN
R
WE
PO
USB Port
Mini USB
Connector
3
4
5
PAIRING
Pairing the Wi Transmitter & Receiver
The Wi Transmitter and Receiver are paired at the factory. Perform the
following steps ONLY if you need to reestablish connection between
the Transmitter and the Receiver.
r
p
(Tx)
k
1. First turn ON the Transmitter (Tx) and the Receiver (Rx) by pressing and
holding the POWER button
,
on each of the units for 2 seconds.
The green LED on Each unit will flash.
kv
p
2. Press and hold the LINK button
on the Transmitter (Tx) for 3 seconds.
The Power/Status green LED on the Transmitter will start flashing faster.
The Transmitter is now in a Pairing mode and ready to search for the Receiver.
(Rx)
z
3. Press and hold the LINK button
on the Receiver (Rx) for 3 seconds.
The Power/Status green LED on the Receiver will flash momentarily.
4. Once the Transmitter links with the Receiver, the Power/Status LED on both
devices will turn to solid green.
z
v
5. The Transmitter and Receiver are now ready for use.
7
MONO LAVALIER SETUP
Wi SmartMic Mono Lavalier Mic
U
Wi Digital Systems SmartMic high-end
broadcast quality lavalier features an ultrasmall 3.1 mm MIC capsule mounted on an
ultra-thin rugged cable designed to capture
vocals clearly with excellent rejection of
wind and ambient noise.
T
a
The crisp, high-quality Wi SmartMic™ Mono
Lavalier microphone provides superb vocals
and sound pick-up from all directions making it an excellent choice for video
camera, camcorders, DSLRs,
smartphones and tablets miking.
Refer to the “Lavalier Specs” on
F page
(58) for more details.
8
•
•
•
•
T
t
I
r
i
s
MONO LAVALIER SETUP
Using The Lavalier Option
The Wi SmartMic Mono Lavalier easily accommodates
alternative mounting applications such as:
• Ties, Shirts, Jackets and Behind-the-Button Positioning
• In-Hair
• Beneath T-shirts & Blouses
• Hard to MIC Instruments
The included Lavalier cable clip can be used to customize
the fit of the lavalier to be both comfortable and discreet.
Ideal for filmmaking, news-gathering, presenters,
reporters, worship leaders and pastors, broadcasters,
interviewers, artists, fitness instructors, speaking and
singing performers and more!
9
MONO LAVALIER SETUP
Connecting The Microphone to The Transmitter
Connect the 1/8” TRS end of the microphone cable to
the audio output port
of the Wi Transmitter.
j
F
F
F
For Mono MIC connection, ensure that the
Transmitter is set for Mono Mic-In Mode r
and the LED is in FAST blue flashing mode.
For Stereo MIC or Mono Redundancy MIC connection,
ensure that the Transmitter is set for Stereo Mic-In Mode r
and the LED is in SLOW blue flashing mode.
For Camcorders or DSLRs without microphone noise filter
circuit or limited MIC gain control capability set the Transmitter
to Stereo Line-In Mode r . The blue LED will reflect
TWO FAST flashes.
Refer to the “Tx Button Functions”
on page (50) for more details.
10
r
j
TRANSMITTER PLACEMENT
Transmitter Placement
Designed for singers, performers, broadcasters,
interviewers and active users, the ultra-lightweight,
1.08 oz discreet and unobtrusive Wi Transmitter
can easily be attached to your belt, shirt, or even
placed in your pocket without impeding your
body movement.
For best wireless performance we
recommend mounting the Wi Transmitter
on your belt to the side of your body.
11
OPTIONAL STEREO LAVALIER
Wi SmartMic SL Stereo Lavalier
U
Wi Digital Systems ultra-small 3.1 mm MIC
capsules mounted on an ultra-thin rugged
cable, capture vocals clearly with excellent
rejection of wind and ambient noise.
T
d
The Wi SmartMic™ SL Stereo Lavalier is an
excellent choice for pastors, artists, fitness
instructors, speaking and singing performers
and video camera miking.
Refer to the “Lavalire Specs” on
F page
(59) for more details
•
•
•
•
T
c
s
m
I
r
i
12
OPTIONAL STEREO LAVALIER
Using The Stereo Lavalier
The Wi SmartMic SL Stereo Lavalier easily accommodates alternative mounting applications such as:
• Ties, Shirts, Jackets and Behind-the-Button Positioning
• In-Hair
• Beneath T-shirts & Blouses
• Hard to MIC Instruments
The included dual feed and single feed lavalier
cable clips can be used to customize the fit to
support discreet stereo or mono redundancy
miking applications with comfort and flexibility.
Ideal for filmmaking, news-gathering, presenters,
reporters, worship leaders and pastors, broadcasters,
interviewers, musicians and more!
13
OPTIONAL EARSET SETUP
Wi SmartMic ES Earset
W
Delivering unmatched value, comfort,
sound quality and secure fit, the Wi
SmartMic™ ES earset ultra-small MIC
capsule mounted on an ultra-thin,
rugged, bendable, adjustable length
and incredibly lightweight boom
captures vocals clearly with excellent
rejection of wind and ambient noise.
T
d
p
h
w
Connecting The Earset Cable
Refer to the “Earset Specs” on
F page
(60) for more details.
1
2
3
1. Locate the detachable earset cable.
2. Fasten the earset end of the earset cable
to the screw connector located on the
silicon ear mount.
14
4
OPTIONAL EARSET SETUP
Wearing the Wi SmartMic ES Earset
The Wi SmartMic ES series advanced ergonomic Silicon ear-mount design
delivers an unmatched comfortable fit in seconds while ensuring secure boom
placement even when the head moves, or when used with glasses or other
head-worn accessories. This ultra-lightweight MIC is incredibly easy to
wear even for an extended time.
1. Pull the “C” shaped Sure-Sound silicon ear mount wide open and
clip over the ear.
2. Loop the bottom part of the “C” shaped ear mount beneath the earlobe.
3. You should feel the Wi Sure-Sound earset gripping your ear and pressing
out against your earlobe for comfortable secure fit.
4. The boom is designed to press and curve smoothly around the face.
Adjusting the boom length and curvature are covered in the following section.
15
OPTIONAL EARSET SETUP
5
The Wi SmartMIc ES series microphone capsule is located
at the tip of the boom. The key to maximizing the sound
quality is to locate the capsule as close as possible to the
mouth without touching the face.
U
5
Positioning The Microphone Capsule
5
1. Press the boom locking switch located on the bottom
of the Silicon ear mount.
1
2. Slide the boom shaft to position the MIC capsule
just behind the corner of your mouth when you
are smiling.
2
16
5
3. Release the locking switch when adjustment is complete.
• Placing the microphone too far forward
can result in breath-related pops.
• Use the windscreen outdoors.
T
L
f
d
1
OPTIONAL EARSET SETUP
Using The Earset/Lavalier Cable Clip
The Wi SmartMic ES series comes with an Earset/
Lavalier cable clip to prevent movement of the cable
from dislodging the earset. The clip is specifically
designed to match the diameter of your cable, either
1.4mm or 2mm.
1. Locate the cable clip and gently pull the cable
down into the rubber cable channel opening on
the clip.
2. Attach the clip to the collar and leave enough
slack in the cable such that the head can turn to
both sides without tugging on the clip.
• We recommend leaving the clip attached
to the cable when possible to minimize
repetitive strain on the cable.
17
OPTIONAL SHOTGUN SETUP
Wi SmartMic SG Shotgun
Delivering unmatched value, comfort,
sound quality and secure fit, the Wi
SmartMic™ SG Shotgun ultra-small unidrectional MIC mounted on an ultra-thin,
rugged,and incredibly lightweight boom
captures vocals clearly with excellent
rejection of wind and ambient noise.
Refer to the “Shotgun Specs” on
F page
(61) for more details.
Connecting The Shotgun Mic
Connect the 1/8” TRS end of the WI SmartMic
Shotgun microphone to the audio output port
of the Wi Transmitter
T
D
m
18
OPTIONAL SHOTGUN SETUP
Transmitter Placement
Designed to be attached to boom poles and tripods stands for perfect wireless clear directional audio shotgun
miking on the go.
19
CAMERA CONNECTION
Camera Connection
The Wi Transmitter and Receiver are designed
to mount video camera DSLR and handheld
recorders.
1. Locate the 1/4”-20 Hot Shoe flash adapter
for cameras, tripods and bipods.
2. Fasten the 1/4”-20 Hot Shoe flash adapter
mounting screw to the belt clip 1/4”-20 nut
and tighten the top lock ring.
3. Loosen the bottom lock ring on the 1/4”-20
Hot Shoe flash adapter camera accessory.
4. Insert/slide the mounting foot of 1/4”-20 Hot
Shoe flash adapter into the camera accessory
shoe and tighten the bottom lock ring.
emulate direct lavalier connection setting for your
F Tocamera,
change the Transmitter mode setting to Line-in
20
mode.
A
5
1
2
3
d
EARSET SETUP
CAMERA CONNECTION
Audio Cable Connection
5
3. Insert the 1/8” TRS stereo end or the XLR end of
the audio cable into the Camera MIC-IN or Line-In
audio input jack.
5
1. Locate the 1/8” to 1/8” TRS stereo audio cable or
the 1/8” to XLR TRS audio cable. Use the 1/8”
TRS to XLR audio cable if your camera is
equipped with XLR audio input ports.
2. Insert the 1/8” TRS stereo end of the audio cable
into the Wi Receiver audio output jack.
audio results we recommend connecting
F toForthebestLine-In
input if available.
1/8” to 1/8” TRS Stereo Cable
1/8” TRS to XLR Cable
21
SMARTPHONE CONNECTION
Smartphone Connection
j
l
The Wi Receiver is designed to mount
almost any Smartphone using the
Smartphone adapter.
1. Locate the Smartphone adapter
and the 1/4”-20 adapter
2. Fasten the 1/4”-20 adapter to the
mounting screw on the Smartphone
adapter 1/4”-20 nut and tighten the
bottom lock ring.
3. Fasten the 1/4”-20 adapter
mounting screw to the Receiver
belt clip 1/4”-20 nut
4. Tighten the top lock ring.
22
5
6
7
k
m
8
N
if
m
SMARTPHONE CONNECTION
p
o
5
q
5
Note: Remove your phone covers especially
if you are using a large phone or your phone
might not fit perfectly in the phone holder.
n
5
5. Fit your phone to the bottom
of the Samrtphone holder portion
of the Smartphone mounting adapter
6. Start by extending the top part of
the Smartphone holder portion
and then fitting your phone in
between the bottom and the top
of the Smartphone mounting adapter.
7. Locate the Gray 1/8” to 1/8” Smart
Device cable and Insert the Gray
1/8” TRS end of the cable into the
Wi Receiver audio output jack.
8. Route the cable beneath the belt
clip as shown to keep the cable
clear from the camera lens vision field.
23
SMARTPHONE CONNECTION
9. Locate the MIC/Headphone adapter
and your personal headphones.
Insert the 1/8” TRS end of the
MIC/Headphone adapter into the
Smartphone MIC/Headphone
port.
10. Insert the Black 1/8” TRS end of
the Smart Device cable into the
Microphone port on the MIC/
Headphone adapter.
11. Insert the 1/8” TRS stereo end
of your personal headphones
cable into the Headphone
port on the MIC/Headphone
adapter.
24
r
j
s
S
T
d
s
p
w
Optional Wi Micro-In-Ear Monitors
Model Wi-SEMi5
11
SMARTPHONE CONNECTION
Smartphone Handling Options
j
l
The Wi AudioStream Pro AV is
designed to be held by hand for free
style filming or be attached to boom
poles and tripod stands for perfect
wireless miking on the go.
k
25
TABLET CONNECTION
Connecting the Receiver to Tablet Audio Port
The Wi Receiver brings the convenience of
hands-free digital wireless miking and freedom
of movement to smartphones and tablets to
transform these smart devices to powerful
on-the-go Audio-Visual production tools.
This powerful system enables users to wirelessly
connect an earset or a lavalier microphone and
capture superb vocals and amazing ambient sounds
easily and accurately with perfect recording levels on
iPhone, iPod, iPad, Windows Surface, Tablet PC or
any Smartphone.
U
M
1
2
3
4
5
26
TABLET CONNECTION
5
5
5
1. Locate the the Gray 1/8” to 1/8” Smart Device
cable and the MIC/Headphone adapter.
2. Insert the Gray 1/8” TRS end of the
audio cable into the Wi Receiver audio
output jack.
3. Insert the Black 1/8” TRS end of the
cable into the Microphone port on the
MIC/Headphone adapter.
4. Insert the 1/8” TRS stereo end of the
headphone cable into the Headphone
port on the MIC/Headphone adapter.
5. Insert the 1/8” TRS end of the MIC/Headphone
adapter into the Tablet MIC/Headphone port.
5
Using The MIC/Headphone Adapter to
Mount The Receiver to Tablets
27
SOUND SYSTEM CONNECTION
A
Connecting The Receiver to Sound Systems
The Wi AudioStream Pro AV is designed to connect
to amps, mixers, live sound systems or powered
speakers in minutes!
Simply connect the ultra compact sized
Receiver to the mixer, amplifier or powered
speaker and you are done!
No phantom power required!
28
1
2
SOUND SYSTEM CONNECTION
Audio Cable Connection
1. Locate the 1/8” stereo to 1/4” TRS cable
or the 1/8” to XLR TRS audio cable that comes
with the system.
2. Connect the 1/8” TRS end of the cable to the audio
output port
of the Receiver, then connect the
1/4” TRS cable end to the mixing console audio inputs.
If you are using the Mono XLR cable, connect the XLR
cable end to the MIC XLR port on the mixing console.
u
Stereo Connection Cable
1/8” to 1/8” TRS Stereo Cable & 1/4” Adapter
u
Mono Connection Cable
1/8” TRS to XLR Cable
29
AUDIO MONITORING
Audio Monitoring
H
The Wi AudioStream Pro AV is designed to provide
freedom of wireless movement to any conventional
headphones or in-ear personal monitors making it an
ideal system for audio listening and monitoring
applications.
1
You can wirelessly listen to your music from live sound
systems, MAC, PC, smart device or any audio source
by connecting the Wi Transmitter to your audio source
and your headphones or in-ear personal monitors to the
Wi Receiver.
The system is optimized for Wi Digital’s optional
Wi Sure-Ears model Wi-SEBD10 and Wi Micro-In-Ear
model Wi-SEMI5 personal reference monitors for
a high quality wireless monitoring experience.
30
2
3
AUDIO MONITORING
Headphone & In-Ear Personal Monitors Setup
PLEASE PROTECT YOUR EARS! Prolonged use
of headphones or In-ear personal monitors at high
volumes may affect your hearing capacity or may
result in noise induced hearing loss (NHL).
1. Connect the Wi Transmitter to your audio source using
one of the included stereo audio cables that best fit
your audio source audio port jack.
2. Set the Wi Transmitter to “Stereo Line-in” mode by
pressing the MODE button
for three seconds until
the blue LED reflects “Double Blue Flashes”.
r
}
the “Tx Button Functions” on page (52)
FforRefermoreto details.
3. Insert the 1/8” TRS stereo end of the Headphone cable
into the Wi Receiver audio output jack
.
u
u
31
USB WIRELESS AUDIO INTERFACE
2-Way Wireless USB 2.0 Audio Interface
W
The 2-Way wireless USB 2.0
audio interface enables users to
wirelessly connect microphones
and In-ear monitors to iPad®,
Windows Surface®, Tablet PC,
MAC and PC computers for
untethered simultaneous two-way
2.4GHz digital wireless studio
audio quality connectivity to
practice, record and monitor their
performance with superb tones
using the sound effects in Apple’s
Logic Pro, GarageBand software
or any Core Audio compatible
application on iPad, Tablet, Mac
or PC.
T
p
32
•
•
•
•
•
USB WIRELESS AUDIO INTERFACE
Wireless USB Audio Interface Features List:
The amazing 2-Way wireless USB 2.0 audio interface features special circuitry designed to deliver
professional digital wireless audio I/O performance along with low latency USB 2.0 performance.
• Wirelessly connect your iPad®, Windows Surface®, Tablet PC, MAC and PC to studio gear or
professional on-stage audio systems such as DJ gear, audio mixers, powered speakers/monitors,
amplifiers and live sound systems in minutes.
•
Convert your iPad®, Windows Surface®, Tablet PC, MAC and PC to a powerful on-the-go video
production tool without the cable clutter.
• Conduct Podcasting or voice over the internet (VoIP) chats with support for most common calling
applications including Webex®, GoToMeeting®, Skype®, Yahoo!®, Acrobat Connect®, Facebook®,
Google+Hangouts® and more.
• Connect your iPad®, Windows Surface®, Tablet PC, MAC and PC wirelessly to your home theater
or stereo system while keeping your gear at your finger tips.
• Stream audio wirelessly to your favorite headphone or in-ear monitors with full access to all of the
essential audio control functions of your iPad®, Windows Surface®, Tablet PC, MAC and PC including
volume up and down, play, pause, mute, track control and MIC muting in the palm of your hand.
33
MAC USB SETUP
C
1. Locate the included USB data cable.
2. Make sure that the Transmitter and the Receiver
are turned OFF.
3. Insert the mini USB end of the USB data cable
into the Wi Transmitter USB audio interface
port located on the side of the Transmitter.
4. Insert the full size USB end of the USB data cable
into your Mac laptop or desktop USB port.
5. Power up the Transmitter and the Receiver.
1
5
Connecting to Your Mac
2
3
5
4
USB
Data Cable
34
MAC USB SETUP
Configuring The Audio Ports On Your Mac
1. To select the Wi Transmitter as the computer’s audio output, open
the System Preferences from the dock or the main Apple Menu.
2. Open the Sound preferences then choose the output tab and
select Wi AudioStream Pro.
3. Adjust the Output volume slider at the bottom of the Sound dialog
box to the maximum setting. Use the Wi AudioStream Pro Receiver’s
volume controls to control the overall output volume for the headphones
or speakers.
4. Select the Wi AudioStream Pro as the computer’s audio input interface for use
with your Lavalier or your headphone with built-in MIC. Choose the Input
tab and Wi AudioStream Pro. Adjust the Input volume slider to set the MIC gain.
35
PC USB SETUP
W
36
5
1. Locate the included USB data cable.
2. Make sure that the Transmitter and the Receiver
are turned OFF.
3. Insert the mini USB end of the USB data cable
into the Wi Transmitter USB audio interface port
located on the side of the Transmitter.
4. Insert the full size USB end of the USB data cable
into your laptop or desktop USB port.
5. Power up the Transmitter and the Receiver.
6. Windows will recognize the Wi Transmitter and
automatically install the universal driver. A balloon
will pop up, telling you the computer has found the
Wi Transmitter. When Windows is finished
installing the driver, a balloon pop up will say
“Your device is installed and ready to use”.
5
Connecting To Your PC
PC USB SETUP
Windows 7/Vista/XP Optional Settings
1. Setting the Wi Transmitter as your default audio device
To set the Wi Transmitter as your default device for sound playback and recording, or to change its
settings, click the Start button, click Control Panel and then click Sound. Under the Playback and Recording
tabs, you can select the Wi AudioStream Pro from the menus and use the Set Default button to set it as
the default device.
2. Setting the Wi Transmitter MIC gain
To set the gain of the microphone when using the Wi Transmitter, click on the Volume button in the Sound
recording section. Moving the slider will adjust the microphone gain.
37
iPad USB SETUP
Apple Optional USB Camera Adapters
Connecting to Your iPad
C
The optional Apple Lightning to USB Camera adapter Model
MD821ZM/A or 30-pin to USB Camera adapter Model MC531ZM/A
is required to set up your Wi AudioStream Pro with iPad.
1
2
Note: Before using the Wi AudioStream Pro with your
iPad, you need to fully charge the Transmitter batteries.
Your iPad will display the message “The attached
acessory uses too much power” if the Transmitter
is not fully charged.
1. Make sure that the Transmitter and the Receiver are OFF.
2. Insert the mini USB end of the USB data cable into the
USB audio interface port located on the side of the Transmitter.
3. Insert the full size USB end of the USB data cable to the USB
port on the optional Apple iPad Camera connection adapter.
4. Power up the Transmitter and the Receiver.
5. Apple iPad iOS will automatically install the universal driver.
38
Apple 30-pin Adapter
Model MC531ZM/A
Apple Lightning Adapter
Model MD821ZM/A
3
4
5
6
r
SURFACE & TABLETPC USB SETUP
1. Locate the included USB data cable.
2. Make sure that the Transmitter and the Receiver
are turned OFF.
3. Insert the mini USB end of the USB data cable
into the Wi Transmitter USB audio interface port
located on the side of the Transmitter.
4. Insert the full size USB end of the USB data cable
to your Windows Surface or Tablet PC USB port.
5. Power up the Transmitter and the Receiver.
6. Windows will recognize the Wi Transmitter and
automatically install the universal driver. The
Wi AudioStream Pro Plug-and-Play systems is
now ready for use.
5
Connecting to your Windows Surface and Tablet PC
39
USB AUDIO LISTENING
Headphone & In-Ear Personal Monitors Setup
PLEASE PROTECT YOUR EARS! Prolonged use
of headphones or In-Ear personal monitors at high
volumes may affect your hearing capacity or may
result in noise induced hearing loss (NHL).
• You can wirelessly listen to your iPad®, Windows
Surface®, Tablet PC, MAC and PC computers music by
connecting your headphones or in-ear personal monitors
to the Wi Receiver.
|
}
y
{
}
• Pressing the Play
button on the Wi Receiver will
automatically start iTunes or Windows media player.
• You can remotely control the audio functions of your MAC,
PC, iPad or Windows Surface Play/Pause/Mute
, Next
Track
, Prev Track , Volume UP , Volume Down
directly from the Wi Receiver using the function buttons.
y
{
|
x
}
We recommend using the Wi Sure-Ears (Wi-SEBD10)
or the Wi Micro-In-Ear (Wi-SEMI5) in-ear monitors for
a high quality monitoring experience..
40
u
x
USB VoIP & PODCASTING
5
5
USB VoIP and Podcasting
Your MIC is probably the most important part of your setup.
For VoIP application, typical headphones equipped with a
microphone are sufficient. Simply plug in your headphones
equipped with a microphone to the Receiver and get started.
Microphone
Connection
Headphone
Connection
5
For Podcasting, you will need a good set of monitors when
you’re recording to monitor yourself as well as hear your
guests. We recommend using the Wi Sure-Ears (WiSEBD10) or Wi Micro-In-Ear (Wi-SEMI5) for a high quality
monitoring experience.
1. Locate the MIC/Headphone adapter.
2. Insert the headphone cable jack into the
Headphone port on the MIC/Headphone adapter.
3. Insert the 1/8” TRS end of the earset or lavalier MIC
into the Microphone port on the MIC/Headphone adapter.
4. Insert the 1/8” TRS end of the MIC/Headphone.
adapter into the Wi Receiver Audio I/O port.
41
SMART DEVICE DIRECT MIC CONNECTION
Connecting The Wi SmartMic Lavalier Directly
into Smart Devices Analog Audio Port
The Wi SmartMic microphone line is designed to connect
directly into any samrt device Headphone/MIC audio
input jack including iPhone, iPod, iPad, Windows Surface,
Tablet PC or any Smartphone to capture superb
vocals and amazing ambient sounds easily and acurately
while providing audio monitoring functions.
Compatible with any application that accepts input from
a headset connection, the crisp, high-quality audio
lavalier microphone provides superb vocals and sound
pick-up from all directions. For noisy environments, the
best microphone to use is the unidirectional earset MIC.
It isolates your voice against typically noisy backgrounds.
42
U
M
1
2
3
4
SMART DEVICE DIRECT MIC CONNECTION
Wi Receiver
Connection
Headphone
Connection
5
5
1. Locate the Wi SmartMic Lavalier, and the
MIC/Headphone adapter included in the kit.
2. Insert the 1/8” TRS stereo end of the
earset or lavalier into the MIC port on
the MIC/Headphone adapter.
3. Insert the 1/8” TRS stereo end of your
headphone cable into the headphone
port on the MIC/Headphone adapter.
4. Insert the 1/8” TRS end of the MIC/Headphone
adapter into the Smartphone or smart device
MIC/Headphone port.
5
Using The MIC/Headphone Adapter to
Mount The Receiver to Smart Device
43
TRANSMITTER FEATURES
Transmitter Controls and Connections
j
Audio IN Jack: k Power ON/OFF: l Power/Status LED: Press and hold the Power button for 2 seconds
to turn the Transmitter ON or OFF.
Displays the status of six functions: ON/OFF, Battery
Charging, Low Battery, Pairing, Mute, Operating and
Lock Modes.
o
n
m
p
l
k
F Refer to the “Tx Button Functions” on page (51) for more details
m Volume UP: n Volume DOWN: 44
Provides mono and stereo connection for your
microphone or other line level sound source.
Press once to increase the volume level one step
at a time. Hold to increase continuously.
Press once to decrease the volume level one step
at a time. Hold to decrease continuously.
o
p
j
TRANSMITTER FEATURES
o Mute: Press and hold for 1.5 seconds to mute or un-mute the audio.
p Link/Pair: The Link button performs two functions: Pairing and Linking.
Pairing allows the Transmitter to connect and communicate with the Receiver. Press and hold for 3 seconds until the green LED displays fast flashes, indicating that it is ready to pair with a Receiver. Once the Transmitter links with the
Receiver, the LED on both devices will turn solid green.
45
TRANSMITTER FEATURES
q
Lock: r
Mode:
Press and hold for 2 seconds to lock the function key pads on the Transmitter
and the Receiver to preserve all settings and prevent accidental triggering of the
function buttons during operation. Press once to unlock the Transmitter and Receiver function key pads and restore normal operation..
Press and hold for 2 seconds to select the desired operation indicated
by the following blue LED flashing sequence. Continue to hold to cycle
between the three operating modes.
Stereo Mic-In Mode Solid Green LED and Slow Blue LED Flashes.
Mono Mic-In Mode Solid Green LED and Fast Blue LED Flashes.
Stereo Line-In Mode Solid Green LED and Two Blue LED Flashes.
F Refer to the “Tx Button Functions” on page (50) for more details.
46
r
q
TRANSMITTER FEATURES
r
11
s USB 2.0 Audio Interface
& Charging Port: This is a mini USB 2.0 Plug-and-Play
wireless audio interface for iPad®, Windows Surface®, Tablet PC, MAC and PC.
This is also a mini USB power connection
to power up and charge the internal batteries. The Transmitter can be charged
using the supplied universal AC charger,
via an instrument or computer USB port,
or the optional AA battery power booster
adapter.
q
s
11 Belt Clip: The Transmitter can be attached to belts, shirts and pants’ pockets. The compact and lightweight design is easy to wear without impeding body movement. The Transmitter can be attached to cameras, tripods and bipods using the included 1/4”-20 Hot
Shoe flash adapter.
47
RECEIVER FEATURES
Receiver Controls and Connections
u Audio I/O Jack: v
Power ON/OFF: w Power/Status LED: x Volume UP: y Volume DOWN: 48
Stereo/Mono audio output and mono MIC input port
connection for professional Sound Systems, In-Ear
Monitors, Microphones and more...
Press and hold for 2 seconds to turn the Receiver
ON or OFF.
Displays the status of six functions: ON/OFF, Battery Charging, Low Battery, Pairing, Mute and Lock mode.
Press once to increase the volume level one step
at a time. Hold to increase continuously.
Press once to decrease the volume level one step
at a time. Hold to decrease continuously.
z
u
|
y
{
z
w
x
v
{
|
x
v
RECEIVER FEATURES
z Link/MIC:
This multifunction button performs the Pairing and VoIP MIC muting.
Pairing allows the Receiver to be discovered by the Transmitter. Press and hold the Link button for 3 seconds until the green LED displays fast flashes, indicating that it is ready to pair with a Transmitter. Once the Transmitter links with the
Receiver, the LED on both devices will turn solid green.
{ Next Track: |
VoIP & Microphone operations - See item #10
The Next Track function button is used to remotely control jumping to the next
track for media players or sequencing software. Press the Next Track button once
to jump to the next audio track.
Previous Track: The Previous Track function button is used to remotely control jumping to the
previous track for media players or sequencing software. Press the Previous Track
button once to go back to the previous audio track.
49
RECEIVER FEATURES
} Mute/Pause/Play: Press and hold the Mute/Pause/Play button for 1.5 seconds to mute/un-mute audio.
Press once to pause or play an audio track. This function will remotely control the
media player or sequencing software functions.
~ MIC:
F
Refer to the “Rx Button Functions” on page (52) for more details.
50
}
Press the LINK / MIC button once to mute the Microphone.
The Blue LED on the Receiver will turn ON when the MIC is on mute.
Press the LINK / MIC button again to unmute the Microphone.
The Blue LED on the Receiver will turn OFF when the MIC is off mute.
~
RECEIVER FEATURES
11 Charging Port: s
}
~
12
This is a mini USB connection to power
up and charge the internal batteries. The Receiver can be charged using the supplied universal AC charger, via an
instrument or computer USB port, or the optional AA battery power booster adapter.
12 Belt Clip: The Transmitter can be attached to belts, shirts and pants’ pockets. The compact and lightweight design is easy to wear without impeding body movement. The Transmitter can be attached to cameras, tripods and bipods using the included 1/4”-20 Hot
Shoe flash adapter.
11
51
Tx BUTTON FUNCTIONS
Transmitter (Tx) Button Functions
T
FunctionButton
ActivationHold Time
LED Status
F
2 sec
Solid Green
k POWER Press and Hold
Pairing Mode
Press and Hold
3 sec
Fast Green Flashes
p LINK
Volume UP/Down
Click for Step, Press and hold for Auto
Click
mn
Mute ON/OFF
Press and Hold
1.5 sec
Solid Green and Blue
o
Lock Tx/Rx Key Pads
Press
and
Hold
to
Lock/Unlock
Key
Pad
2
sec
Solid Green Only /
q
Solid Green & Blue Flashes
Stereo Mic-In Mode r MODE
Press and Hold
2 sec
Solid Green LED and
Slow Blue LED Flashes
Power ON/OFF
r
r
Mono Mic-In Mode
MODE
Press and Hold 2 sec
Solid Green LED and
Fast Blue LED Flashes
Stereo Line-In Mode
MODE
Press and Hold
2 sec
Solid Green LED and
Double Blue Flashes
52
S
L
L
L
C
C
C
Tx LED INDICATOR CHART
Transmitter (Tx) LED Indicator Chart
Function
Searching For Receiver
Linked to Receiver
Lock Mode
Low Battery
shes
Charging With Power OFF
s
Charging With Power ON Charging Complete
LED Status
l
l
l
l
l
l
l
Flashing Green
Solid Green
Solid Green Only
Solid Green & Flashing Red
Solid Red
Solid Red & Green
Red OFF
r
o
n
q
p
l
m
k
53
Rx BUTTON FUNCTIONS
Receiver (Rx) Button Functions
R
FunctionButton
ActivationHold Time
LED Status
F
2 sec
Solid Green
v POWER Press and Hold
Pairing Mode
Press and Hold
3 sec
Fast Green Flashes
z LINK
MIC Mute On/Off
LINK/MIC Click
Click
Two Blue LED Flashes z
/ Solid Green LED
Power ON/OFF
xy
Mute ON/OFF
}
Play/Pause
}
Next Track
{
Prev Track
|
Volume UP/Down
54
1.5 sec
Click (In USB Mode)
Click
Click (In USB Mode)
Click
Click (In USB Mode)
Click
L
K
L
Click for Step, Press and Hold for Auto Click
Press and Hold
S
Solid Green & Blue
C
C
C
s
Rx LED INDICATOR CHART
Receiver (Rx) LED Indicator Chart
Function
Searching For Transmitter
Linked to Transmitter
Key Pad Lock
Low Battery
Charging With Power OFF
Charging With Power ON
Charging Complete
LED Status
w
w
w
w
w
w
w
Flashing Green
Solid Green
Solid Green (Activated by Tx)
Solid Green & Flashing Red
Solid Red
Solid Red & Green
Red OFF
|
}
y
{
z
w
x
v
55
SYSTEM SPECIFICATIONS
Wi AudioStream Pro AV Technical Specifications
Specifications
Transmission Format:
2.4 GHz, 16-bit, 48kHz Digital Wireless
Frequency Response:
15Hz to 20kHz
Frequency Selection:
Auto select
S/N Ratio:
More than 90 dB (A-weighted) for stereo line-in mode
More than 89 dB (A-weighted) for stereo and mono MIC mode
Distortion:0.12 % THD
Connectors:
1/8” (3.5mm) TRS Stereo
Max Input Level:
1Vrms
Max Output Level:
1.2Vrms
Input Impedance:
3.3K ohm
Output Impedance:
< 10 ohm
Rechargeable Battery Life:
4~6 hours
Power Input:
5V DC, 500 mA
56
S
B
U
L
P
A
R
U
U
A
W
C
V
8
T
R
SYSTEM SPECIFICATIONS
Specifications
Battery Power Booster:
10~13 hours (With optional AA battery power booster adapter)
USB Bus Power:
Low Battery Alert:
Power-up Modes:
Antenna:
Range:
Units operating at the same time:
USB 2.0 Audio Interface:
Apple OS Support: Windows OS Support: Compatibility: VoIP Capable:
802.11g/n Network Safe:
Transmitter Weight:
Receiver Weight:
Yes
15 minutes of life left
Three (3) power-up modes (Stereo Line-In, Stereo Mic-In, Mono Mic-In)
Two internal antennas
Up to 100 ft
(Range may be dependent on line of sight and may vary due to local conditions)
9
Full Speed Two-Way USB 2.0 Wireless Audio Interface
MAC OSX and iOS
Win XP/VISTA/Win 7/Win 8/Win10
MAC, PC, iPad®, Windows Surface®
Yes
Yes
0.068 lbs (1.08 Oz) (30.8g)
0.068 lbs (1.08 Oz) (30.8g)
57
LAVALIER SPECIFICATIONS
Wi SmartMic Mono Lavalier Mic Technical Specifications
W
Omnidirectional Capsule Lavalier Specifications
O
Frequency Response:
Operating Current:
Operating Voltage:
Sensitivity:
Maximum SPL:
Output Impedance:
Capsule Type:
Element:
Polar Pattern:
F
O
O
S
M
O
C
E
P
C
58
20Hz to 20kHz
Less than 500uA
0.8V - 5V DC
-32dB+/-4dB/Pascal
140 dB SPL max
2KΩ±30%
3.1mm Capsule
Back Electret Condenser
Omnidirectional
OPTIONAL STEREO LAVALIER SPECS
Wi SmartMic SL Stereo Lavalier Technical Specifications
Omnidirectional Capsule MIC Specifications
Frequency Response:
Operating Current:
Operating Voltage:
Sensitivity:
Maximum SPL:
Output Impedance:
Capsule Type:
Element:
Polar Pattern:
Configuration: 20Hz to 20kHz
Less than 500uA
0.8V - 5V DC
-32dB+/-4dB/Pascal
140 dB SPL max
2KΩ±30%
3.1mm Capsule
Back Electret Condenser
Omnidirectional
Stereo or Mono MIC Redundancy
59
OPTIONAL EARSET MIC SPECS
Wi SmartMic ES Earset Mic Technical Specifications
Unidirectional Capsule MIC & Mechanical Specifications
W
Ear Mount:
Ear Placement:
Boom Type:
Cable Type:
Sure-Fit™ Ergonomic Silicon Ear Mount
Simple-Twist™ Left and Right Ear Placement
Simple-Twist™ Bendable, Adjustable Length
Boom with Locking Mechanism
Simple-Twist™ Detachable Cables
Frequency Response:
Operating Current:
Operating Voltage:
Sensitivity:
Maximum SPL:
Output Impedance:
Capsule Type:
Element:
Polar Pattern:
50Hz to 15kHz
Less than 500uA
0.8V - 5V DC
-51dB+/-4dB/Pascal
130 dB SPL max
1.5KΩ±30%
3.5mm Capsule
Back Electret Condenser
Cardioid (Unidirectional)
60
O
F
O
O
S
M
O
C
E
P
OPTIONAL SHOTGUN MIC SPECS
Wi SmartMic SG Shotgun Mic Lavalier Technical Specifications
Omnidirectional Capsule Lavalier Specifications
Frequency Response:
Operating Current:
Operating Voltage:
Sensitivity:
Maximum SPL:
Output Impedance:
Capsule Type:
Element:
Polar Pattern:
20Hz to 20kHz
Less than 500uA
0.8V - 5V DC
-32dB+/-4dB/Pascal
140 dB SPL max
2KΩ±30%
3.1mm Capsule
Back Electret Condenser
Cardioid (Unidirectional)
61
REGULATORY COMPLIANCE
Regulatory Compliance Information
D
Compliance Statement
C
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures: (1) Re-orient or relocate the receiving antenna. (2) Increase the separation
between the equipment and Receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the
Receiver is connected. (4) Consult the dealer or an experienced radio/ TV technician for help. CAUTION: Any changes or
modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.
T
t
t
a
c
62
-
RECYCLING INFORMATION
Disposal and Recycling Information
Correct Disposal
This symbol indicates that your product must be disposed of properly according
to local laws and regulations. When your product reaches its end of life, contact
the retailer where the product was purchased or your local authorities to learn
about recycling options. This product should not be mixed with other
commercial waste for disposal.
63
PRODUCT WARRANTY
Product Warranty Terms
O
Wi Digital Systems warrants that the Wi AudioStream Pro AV is free from material defects and faulty workmanship for a
period of twelve (12) months from the date of purchase. Wi Digital Systems will repair or replace, at its option, any Product
that breaches this warranty during said period. This warranty does not cover and is void with respect to (1) Products
which have been improperly installed, repaired, modified or altered; (2) Products which have been subject to abuse,
misuse, physical damage, exposure to fire, water or excessive moisture or dampness; (3) Products on which the serial
number has been removed, altered, or rendered illegible; (4) Products that are operated outside the limits of the technical
specifications of the product.
S
W
Repair and/or replacement of the Wi Digital Systems product will be performed through Wi Digital Systems Return
Material Authorization (RMA) procedure. The customer is required to contact Wi Digital Systems at www.widigitalsystems.
com to obtain the approval and procedure for returning any product under warranty.
IN NO EVENT SHALL Wi DIGITAL SYSTEMS BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, DIRECT,
INDIRECT, SPECIAL OR PUNITIVE DAMAGES WHICH ARISE IN ANY WAY OUT OF THE MANUFACTURE, SALE OR
USE OF ITS PRODUCTS OR SERVICES. In the event that a court of competent jurisdiction determines that Wi Digital
Systems is in breach of any warranty, the amount of recoverable damages shall be limited to the cost of the replacement
of any Product found to be defective or nonconforming.
64
L
W
i
a
I
I
D
B
F
O
O
O
t
R
PRODUCT WARRANTY
Out of Warranty
Should your Wi AudioStream Pro AV not function properly after the warranty period has expired, please contact
Wi Digital Systems Customer Care at [email protected]
Limitations of Liability
Wi Digital Systems expressly assumes no responsibility for any error, omission, interruption, deletion, defect, delay
in operation or transmission, communications failure, theft or destruction or unauthorized access to, or alteration of,
any use of the Wi AudioStream Pro AV product. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
IN NO EVENT SHALL WI DIGITAL SYSTEMS OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
INDIRECT, PUNITIVE OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING, BUT NOT LIMITED TO,
DAMAGES FOR: LOSS OF PROFITS OR REVENUES, LOSS OF CONFIDENTIAL OR OTHER INFORMATION ,
BUSINESS INTERRUPTION, PERSONAL INJURY, DEATH, LOSS OF PRIVACY, CORRUPTION OR LOSS OF DATA,
FAILURES TO TRANSMIT OR RECEIVE AUDIO OR ANY OTHER PECUNIARY LOSS WHATSOEVER ARISING OUT
OF OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO USE THE DEVICE OR THE SUPPORT SERVICES
OR OTHERWISE IN CONNECTION WITH ANY PROVISION OF THIS AGREEMENT, EVEN IF WI DIGITAL SYSTEMS
OR ANY SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
65
w w w.widigitalsystems.com
© 2015 Wi Digital Systems, Inc. All rights reserved. Stylized Wi logo is a registered trademark of Wi Digital
Systems, Inc. in the United States and may be a registered trademark in other countries. Wi, Digital
Wireless Stereo logos and Wi AudioStream, SmartMic, Wi Sure-Ears, Wi Micro-In-Ear are trademarks of Wi
Digital Systems, Inc. All other trademarks included herein are the property of their respective owners.
(Design and specifications subject to change without notice).
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement