User`s Manual
®
Series LCD Flat Panel HDTV
Thank you for purchasing this Hitachi product. Please read these instructions carefully.
For additional assistance please call 800.Hitachi (800.448.2244) or visit our website at www.hitachi.us/tv.
Keep this owners guide for future reference.
Record the model name and serial number of your LCD Television for future reference.
This information is located on the back and right side of the television.
MODEL NAME. ________________________ SERIAL NO. ___________________________
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ................................................................................. 2-5
FIRST TIME USE ................................................................................................................... 6-17
THE REMOTE CONTROL ................................................................................................... 18-27
ON-SCREEN DISPLAY ........................................................................................................ 28-41
USEFUL INFORMATION ..................................................................................................... 42-48
LIMITED WARRANTY ............................................................................................................... 49
END USER LICENSE AGREEMENT FOR HITACHI DTV SOFTWARE .............................. 50-54
APPENDIXES ............................................................................................................................ 55
INDEX ........................................................................................................................................ 56
HDMI, the HDMI logo and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC.
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
Revision 020310
Important Safety Instructions
SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR HITACHI LCD TELEVISION
Our reputation has been built on the quality, performance, and ease of service of Hitachi LCD televisions.
Safety is also foremost in our minds in the design of these units. To help you operate these products properly, this section illustrates safety
tips which will be of benefit to you. Please read it carefully and apply the knowledge you obtain from it to the proper operation of your Hitachi
LCD television.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of a
sufficient magnitude to constitute a risk of electric shock to a person.
The exclamation point within an equilateral triangle, is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
READ BEFORE OPERATING EQUIPMENT
Follow all warnings and instructions marked on this LCD television.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong
are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use the attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused
for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the
15.
16.
17.
18.
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Televisions are designed to comply with the recommended
safety standards for tilt and stability. Do not apply excessive
pulling force to the front, or top, of the cabinet which could
cause the product to overturn resulting in product damage
and/or personal injury.
Follow instructions for wall, shelf or ceiling mounting as
recommended by the manufacturer.
An outdoor antenna should not be located in the vicinity of
overhead power lines or other electrical circuits.
If an outside antenna is connected to the receiver be sure the
antenna system is grounded so as to provide some protection
against voltage surges and built up static charges. Section
810 of the National Electric Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper grounding for the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding connectors,
location of antenna discharge unit, connection to grounding
electrodes and requirements for the grounding electrode.
To the CATV system installer: This reminder is provided to
call the CATV system installer’s attention to Article 820-44 of
the NEC that provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
NOTE
Power source
This LCD television is designed to operate on 120 volts 60 Hz, AC current. Insert the power cord into a 120 volts 60 Hz outlet. The mains
plug is used as the disconnect device and shall remain readily operable.
To prevent electric shock, do not use the LCD television’s (polarized) plug with an extension cord, receptacle, or other outlet unless the
blades and ground terminal can be fully inserted to prevent blade exposure.
Never connect the LCD television to 50 Hz, direct current, or anything other than the specified voltage.
This television’s factory default settings as shipped meet ENERGY STAR requirements.
Please see the Energy Options section of this owners guide for more energy saving tips.
CAUTION
2
Never remove the back cover of the LCD television as this can expose you to very high voltages and other
hazards. If the television does not operate properly, unplug the LCD television and call your authorized dealer
or service center.
Adjust only those controls that are covered in the instructions, as improper changes or modifications not
expressly approved by Hitachi could void the user’s warranty.
Important Safety Instructions
Warning
•
•
•
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
The LCD television should not be exposed to dripping or splashing and no objects filled with liquids, such as vases, should
be placed on the television.
This apparatus shall be connected to a mains socket outlet with a protective earthing connection.
Public viewing of copyrighted material
Public viewing of programs broadcast by TV stations and cable companies, as well as programs from other sources, may require prior
authorization from the broadcaster or owner of the video program material.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized, and is intended for home and other limited payper-view uses only unless
otherwise authorized. Reverse engineering or disassembly is prohibited.
Lead/Mercury Notice
Hg
This product contains lead and one or more non-replaceable mercury backlights. Do not put in trash. Recycle or dispose
of according to applicable laws. For product recycling and disposal information, contact your local government agency or
visit www.eiae.org (in USA) or www.epsc.ca (in Canada). FOR MORE INFORMATION, CALL 800.HITACHI.
FEDERAL COMMUNICATIONS COMMISSION NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/television technician for help.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hitachi
America, Ltd. may void the user’s authority to operate the equipment.
Cables
Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC
Rules and Regulations.
Any cables that are supplied with the system must be replaced with identical cables in order to assure compliance with FCC rules. Order
Hitachi spares as replacement cables.
This LCD Television receiver will display television closed captioning, (
the FCC rules.
or
), in accordance with paragraph 15.119 and 15.122 of
Declaration of Conformity
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :
(1)This device may not cause harmful interference and (2)This device must accept any interference received,
including interference that may cause undesired operation.
For questions regarding this declaration, contact:
Hitachi America, Ltd.
900 Hitachi Way
Chula Vista, CA 91914-3556
Tel. 800.448.2244(800.HITACHI)
ATTN: Customer Relations
• VGA and XGA are trademarks of International Business Machines Corporation.
• VESA is a registered trademark of the Video Electronics Standard Association.
• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks of registered trademarks of HDMI Licensing LLC in the
United States and other countries.
3
Important Safety Instructions
Congratulations on your purchase!
As you enjoy your new product, please keep these safety tips on mind:
HITACHI CARES!
•
•
•
•
The consumer electronics industry is commited to making home entertainment enjoyable and safe.
Please note the American Academy of Pediatrics discourages television
viewing for children younger than two years of age.
The home theater entertainment experience is a growing trend and larger flat displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the
manufacturer’s recommendations.
Flat Panel displays that are inappropriately situated on dresser, bookcases,
shelves, desks, speakers, chest or carts may fall over and cause injury.
TUNE INTO SAFETY
•
•
•
•
•
•
One size does NOT fit all. Follow the manufacturer’s recommendations
for the safe installation and use of your flat panel display.
Carefully read and understand all enclosed instructions for proper use of
this product.
Don’t allow children to climb on or play with furniture and television sets.
Don’t place flat panel displays on furniture that can easily be used as
steps, such as a chest of drawers.
Remember that children can become excited while watching a program,
especially on a “larger than life” flat panel display. Care should be taken
to place or install the display where it cannot be pushed, pulled over, or
knocked down.
Care should be taken to route all cords and cables connected to the flat
panel display so that they cannot be pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WALL
MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:
•
•
•
•
•
4
Use a mount that has been recommended by the display manufacturer
and/or listed by an independent laboratory (such as UL, CSA, ETL).
Follow all instructions supplied by the display and wall mount manufacturers.
If you have any doubts about your ability to safely install your flat panel
display, contact your retailer about professional installation.
Make sure that the wall where you are mounting the display is appropriate.
Some wall mounts are not designed to be mounted to walls with steel
studs or old cinder block construction.
If you are unsure, contact a professional installer.
A minimum of two people are required for installation. Flat panel displays
can be heavy.
PRECAUTIONS AND REMINDERS
Unplug immediately if any
foreign materials falls into the
TV or if the TV fell down.
Do not cover or block any
vents and openings of the TV.
Inadequate ventilation may
shorten the life of the display
unit and cause overheating.
Unplug immediately if there is
a malfunction on the TV like
no picture, no video/audio or
if there is smoke and bad odor
coming from the TV.
Do not open the TV cabinet.
Avoid direct sunlight, dusty,
high humidity and smokey
locations.
Do not throw any objects inside
the TV like metals, coins or any
other flammable materials.
Remember to unplug the AC
cord from the AC outlet before
cleaning. Do not use liquid
cleaners or aerosol cleaners to
clean the display.
Do not place the TV near water,
such as a bathtub, shower
rooms, kitchen sink, laundry
tub or swimming pool. Avoid
liquid containers on top of the
unit.
Do not place the TV in confined
spaces or inside a box when
the TV is operating.
Make sure to unplug the unit
when not in use for a long
period of time (days).
Do not pick up or handle the TV
from where the TV connects to
the stand. Injury may occur if
the TV is picked up or handled
from this area.
Do not place the unit on
uneven surfaces, this may
drop or damage the unit, it may
also cause personal injury.
.
4 inch
Notice for Remote Control
Avoid dropping the unit.
7
9
8
7
0
6
5
4
Avoid aerosol cleaners.
3
2
1
6
5
4
Avoid liquids on it.
3
2
1
9
8
3
2
1
6
5
4
0
7
9
8
0
5
Accessories
Check to make sure you have the following accessories before disposing of the packing material.
Remote Control Unit
CLU-4997S
(Part No. HL02567)
“AAA” Size
Batteries (2)
Owners Guide
Power Cord
®
Easy Graphic Guide
Stand Screws (4)
Series LCD Flat Panel HDTV
Thank you for purchasing this Hitachi product. Please read these instructions carefully.
For additional assistance please call 800.Hitachi (800.448.2244) or visit our website at www.hitachi.us/tv.
Keep this owners guide for future reference.
Record the model name and serial number of your LCD Television for future reference.
This information is located on the back and right side of the television.
MODEL NAME. ________________________ SERIAL NO. ___________________________
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ................................................................................. 2-4
FIRST TIME USE ................................................................................................................... 5-17
THE REMOTE CONTROL ................................................................................................... 18-27
ON-SCREEN DISPLAY ........................................................................................................ 28-41
USEFUL INFORMATION ..................................................................................................... 42-48
LIMITED WARRANTY ............................................................................................................... 49
END USER LICENSE AGREEMENT FOR HITACHI DTV SOFTWARE .............................. 50-54
APPENDIXES ............................................................................................................................ 55
INDEX ........................................................................................................................................ 56
HDMI, the HDMI logo and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC.
32” (T4x12: Part No. Q1G940-12-47)
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
Revision 020310
42” (M6x12: Part No. OM1G1760 12225 CR3)
Stand Base
32” (Part No. A34T1051 & A15T0643)
42” (Part No. A34T0982-11-01 & A15T0646-101)
For optional accessories, please access our web site at: www.hitachi.us/tv
CAUTION
•
•
Ceiling mounting is not recommended. Mounting the panel on the ceiling does not provide adequate
ventilation for the electronics or proper support for the front panel. This LCD television product is designed
for a maximum tilting angle of 45 degrees from vertical.
Please see page 8 for important information related to wall mounting.
REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT
The remote control operates on 2 “AAA” batteries.
1.
Open the battery cover of the remote control by pushing and pulling it in the direction of
the arrow.
2.
Insert two new “AAA” size batteries for the Remote Control. When replacing old batteries,
push them towards the springs and lift them out.
3.
Match the batteries to the (+) and (-) marks in the battery compartment.
4.
Insert the bottom of the battery, the (-) side, into the battery compartment first, push
towards the springs and insert the top of the battery, the (+) side, into place. Do not force
the battery into the battery compartment.
5.
Close the battery cover making sure the tabs rest in the corresponding holes and push
down the cover until it clicks shut.
CAUTION
6
• Do not insert batteries with ‘+’ and ‘-’ polarities reversed as this may cause the batteries to swell or rupture
resulting in leakage.
• Never mix used and new batteries in the device.
• Replace all the batteries in the device at the same time.
• Remove the batteries if the remote control is not going to be used for an extended period of time.
• The batteries (batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
How To Install Your New Hitachi LCD Television
ASSEMBLY OF THE BASE
IMPORTANT:
The base of the LCD TV must be assembled prior to use.
1.
2.
3.
NOTES
Place the TV unit face down on a soft and flat surface
covered by a blanket, foam, cloth, etc. to prevent any
damage or scratches to the LCD TV.
Carefully align and insert the Base to the TV stand post.
Insert the screws included with the accessories to the
bottom of the base and tighten the base to the stand.
• Do not block the ventilation holes of the LCD
Television. Blocking the ventilation holes might
cause overheating and damage.
• In case of an abnormal symptom, unplug the AC
cord and contact 800.HITACHI.
• If you purchased a wall mount bracket,
please
ask
for
professional
installation.
Do not try to install by yourself.
• Install the unit at a proper area where it does not
expose anyone to any danger of hitting themselves
(For example: their hands, head or face, etc.)
against the edge of the unit that could cause
personal injury.
FIRST TIME USE
Take the following precautions to prevent the LCD Television from tipping over and possibly causing injury. It is important to
mount the unit on a stable and flat surface.
Power Cord Installation
The Power cord provided with your new LCD Television needs to
be installed correctly to avoid its disconnection when rotating the
TV on its Table Top Stand.
Located on the back of the TV there is one plastic clamp to hold the
Power cord. Please follow the instructions below.
Caution when moving the main unit
As this product is heavy, whenever it is moved, at least two people
are required to transport it safely. Whenever the unit is moved, it
should be lifted forward using the top and base on both sides of the
Television for stability.
When moving the Television, lift from the corners, then support
the top frame as shown below.
Please use caution when handling the left and right bottom
corners of the TV, as these areas protrude slightly from the TV’s
frame. Handle this area with care to avoid damaging the unit and
the possibility of personal injury.
Location
Select an area where sunlight or bright indoor illumination will not
fall directly on the picture screen. If so, drapes or screens can be
used to reduce the reflection.
Also, be sure that the location selected allows a free flow of
air to and from the perforated back cover of the set. In order to
prevent an internal temperature increase, maintain a space of 10
cm (4 inches) from the sides/back of the Television, and 30 cm
(12 inches) from the top of the television to the ceiling. To avoid
cabinet warping, cabinet color changes, and increased chance of
set failure, do not place the TV where temperatures can become
excessively hot, for example, in direct sunlight or near a heating
appliance, etc.
Pass the Power cord through the clamp and connect it to the TV.
2.
Close the clamp to fix the Power cord to the TV.
3.
All the cables connected to the TV will be held by this clamp.
AC Wire Clamp
Securing to a Wall
1.
Use a metallic wire (two locations) to fasten the set to the
clamping screw on the rear of the LCD TV as shown below.
2.
Keep the LCD television 4 inches away from the wall, except
when mounted using the wall mount bracket, and secure to
the wall as shown below:
A
Wire
Wire
Wire
Screw
30 cm (12 inches)
10 cm
(4 inches)
1.
Clamp
10 cm
(4 inches)
A
32”
42”
4 in.
10 cm.
7
How To Install Your New Hitachi LCD Television
WALL MOUNTING SETUP
STEP (1) : REMOVE THE STAND BASE FROM THE LCD TELEVISION
In order to remove the stand from the TV safely, please put the TV set on a soft and flat surface (blanket, foam, cloth, etc.) to prevent
any damage; then remove the screws as shown below (For model L42S504, there is one more screw under the cover) to separate the
TV from the Table Top Stand. Now the Stand can be separated from the TV. Useful dimensions for the WALL MOUNT assembly are
illustrated on page 46 and 47.
4 Screws (M4).
(a)
L32S504
(a)
(b)
(b)
4 Screws ((a) M4 and
(b) tapping screws).
Do not mix please.
1 Screw (M4).
L42S504
Stand Base
STEP (2) : INSTALL THE WALL MOUNT BRACKETS ON THE LCD TELEVISION USING 4 SCREWS.
Screw Length (A)
Screw mounting holes (4 locations) for use
with a wall mount bracket.
DO NOT reuse the original screws that
were in these screw mounting holes or the
screws removed in STEP(1) above, as
such screws are not long enough to properly
secure the TV to the wall bracket. Please
refer to example at right and caution below
to determine proper screw length.
Insertion Length (B)
Spring Washer (C)
Plane Washer (D)
Wall Mount Bracket (E)
Example :
A = B+C+D+E
A: 13.5~15.5 mm.
B: 8.5~10.5 mm.
C: 1 mm.
D: 1 mm.
E: 3 mm.
Wall Mount Brackets
For Wall Mount assembly, please refer to the Installation Manual of the
Wall Mount Unit.
The screw type :Thread ISO M6 (Metric
type, do not use Standard type).
Insertion length (B) of the screws must be within 8.5~10.5 mm. If the length is less than 8.5 mm, the TV's
weight cannot be maintained. If the length is more than 10.5 mm, a space is created between the Wall
Mount Bracket and the LCD Television. This insertion length is very important.
CAUTION
STEP (3) : TIPS TO CONSIDER FOR THE LOCATION OF THE LCD TELEVISION.
•
More than
30 cm (1').
More than
10 cm (4").
Keep
more than
2 cm (0.8")
away from
the wall.
Do not block the ventilation holes. In addition
please keep a certain distance around and
CAUTION
make sure not to obstruct ventilation. Blocking
the ventilation holes might cause fire or defect.
• If you purchased a Wall Mount bracket, please ask for a professional
installation. Do not install by yourself.
• This LCD unit features an advanced ventilation system configured for
vertical installation. A knowledgeable and experienced professional
technician can perform other mounting or installation orientations (e.g.,
horizontal, tilted) provided that you specifically inform the technician of
the unit's specialized ventilation needs. Call 800.HITACHI for additional
info and guidance.
Although this LCD Display Panel can be installed using a variety of third party wall mounting brackets/devices,
such third party brackets/devices have not been tested or approved by Hitachi for use or compatibility with
CAUTION
this LCD Display Panel. Accordingly, Hitachi accepts no responsibility or liability for any injuries or property
damage resulting from the use of such third party brackets/devices. Hitachi strongly advises that any
installation of this LCD Display Panel using wall mounting brackets/devices be performed only by a qualified and experienced television
installation technician who has completed a thorough evaluation of:
a) the weight-bearing strength and stability of the intended wall mount surface; and
b) the weight-bearing strength and compatibility of the intended wall mount brackets/device.
8
Side Panel Jacks & Controls
7
USB/
3
8
4
5
FIRST TIME USE
FRONT VIEW
10
2
6
3
11
1
Headphone jack
9
Use this jack to connect headphones.
POWER light indicator
POWER button
To turn the TV ON, press the Power button ( ). A blue
indicator lamp located on the lower left corner of the front
bezel illuminates to indicate the TV power is ON.
This power button is for turning ON the LCD TV, in order to turn
the TV On , the standby indicator must be lit red. If the indicator is
off, plug the power cord into the power outlet.
Indicating
Lamp
Lights
Red
Lights
Blue
Quickly
Blinking Red
MENU button
This button allows you to enter the MENU, making it possible
to set TV features to your preference without using the
remote. This button also serves as the Return button when in
the MENU system.
INPUT button
Press this button to access the INPUT menu.
VOLUME (+/-) level
Press these buttons to adjust the sound level. The volume
level will be displayed on the TV screen. These buttons also
serve as the cursor left (◄) and right (►) buttons when in the
Menu system.
1
Power
Status
OFF
(Stand-by)
ON
ON
Operating
When the LCD TV is plugged
to the AC line.
TV Power is ON; picture is
shown.
The TV is powering OFF.
It will soon be in the Off
(Stand-by) state.
REMOTE CONTROL SENSOR
Point your remote at this area when selecting channels,
adjusting volume, etc.
CHANNEL selector
Press these buttons until the desired channel appears in the
top right corner of the TV screen. These buttons also serve as
the cursor down ( ) and up ( ) buttons when in the MENU
system.
AV2 (SIDE) Jacks
AV2 input provide composite Video and S-Video jacks for
connecting equipment with this capability, such as a DVD
player, Game Console or Camcorders.
HDMI 3 & HDMI 4
Use these side HDMI inputs for AV equipment such as SetTop-Boxes or DVD players equipped with an HDMI output
connection (see page 14 for reference).
USB Multimedia / UPGRADE Slot
This USB slot is for use with the multimedia feature and future
software upgrades.
NOTES
• Your HITACHI LCD TV will not show any picture
if there is no video input when AV1, AV2,
Component1 or 2, or HDMI 1, 2, 3 or 4 is selected.
Instead, a message will indicate “No Signal”, and
the Power Light will remain Blue until the TV is
turned off or in Stand-by mode (lights red) when
not in use.
• The Remote Control can turn the TV ON/OFF as
well as control various devices and any compatible
HDMI CEC devices.
• Please do not put anything around the remote
control sensor.
9
RGB
Rear Panel Jacks
RGB
7
Antenna Input
To switch between Cable and Air, go to the Channels Menu
option to change the signal source CABLE or AIR (see page
40).
Component: Y-PbPr and Audio Inputs
Component 1 and 2 provide Y-PbPr and Audio jacks for
connecting equipment with this capability, such as a DVD
player or Set Top Box.
NOTES
• Your component outputs may be labeled Y , B-Y,
and R-Y. In this case, connect the components B-Y
output to the TV’s Pb input and the components
R-Y output to the TV’s Pr input.
• Your component outputs may be labeled Y-CbCr.
In this case, connect the component Cb output to
the TV’s Pb input and the component Cr output to
the TV’s Pr input.
• It may be necessary to adjust Tint to obtain
optimum picture quality when using the Y-PbPr
inputs (see page 31).
HDMI 1 & 2 (High Definition Multimedia Interface)
About HDMI – HDMI is the
®
next-generation, all digital
interface
for
consumer
electronics. HDMI enables the
secure distribution of uncompressed high-definition video and
multichannel audio in a single cable. Because digital television
(DTV) signals remain in digital format, HDMI assures that
pristine high-definition images retain the highest video quality
from the source all the way to your television screen. Use the
HDMI input for your AV equipment such as Set-Top-Boxes or
DVD players equipped with an HDMI output connection.
HDMI, the HDMI logo and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.
10
Digital Out (Optical Digital Audio)
This jack provides Digital Audio Output for your audio device
that is RAW and PCM compatible, such as an audio amplifier.
NOTE
The Digital Output option will grayout with all input
sources, except with a digital program channel on
the Air/Cable input source.
DVI Audio Input
This jack provides Audio Input from a DVI source when
connected to the HDMI 1 Input. A DVI (source) to HDMI (TV)
connection must be made to HDMI 1.
NOTES
• It is not neccessary to connect the DVI Audio Input
when the connection to HDMI 1 is a HDMI to HDMI
connection.
• The DVI Audio Input is only compatible with the
HDMI 1 Input.
Composite AV1 Jacks
AV1 input provides composite Video and S-Video jacks for
connecting equipment with this capability, such as a DVD
player, Game Console or Camcorders.
Audio Out jack
This jack provides stereo audio output from your TV to your
audio device, such as an audio amplifier.
Quick Reference Remote Control Buttons and Functions
Power On/Off
(TV, DVD, PVR/VCR, SAT/CBL, AVR)
Press this button to switch the selected device
On or Off standby.
Device Buttons
(TV, DVD, PVR/VCR, SAT/CBL, AVR)
Press these buttons to switch between your
devices.
(-) Dash/Sleep Button
(TV, SAT/CBL, PVR/VCR, DVD)
Press this button to tune a digital channel. In
TV mode press to set your Sleep Timer from 5
minutes to 4 hours.
Numeric Buttons
(TV, DVD, PVR/VCR, SAT/CBL, AVR)
Press these buttons to manually enter the
channel or for numeric entry when navigating
through the OSD menu system.
Enter Button
(TV, DVD, PVR/VCR, SAT/CBL, AVR)
Press this button to use as a SELECT feature.
Last Channel Button
(TV, SAT/CBL, PVR/VCR, DVD)
Press this button to switch between the current
and the last channel viewed.
Channel Up/Down Buttons
(TV, PVR/VCR, SAT/CBL, DVD, AVR)
Changes the channel up or down.
Volume Buttons
(TV, AVR)
Press up (+) to increase or down (-) to decrease
the audio level of your TV.
Menu Button
(TV, DVD, PVR/VCR, SAT/CBL, AVR)
Accesses the OSD menu system.
Mute
(TV, AVR)
Reduces the audio level to 0 if pressed once,
and restore the audio level when pressed a
second time.
EXIT Button
(TV, DVD, PVR/VCR, SAT/CBL, AVR)
Press this button to exit the OSD menu.
Guide Button
(SAT/CBL, PVR/VCR, DVD)
Press this button to access the program guide
of other devices.
CURSOR PAD/Select Buttons
(TV, DVD, PVR/VCR, SAT/CBL, AVR)
The CURSOR PAD is used to navigate through
the OSD and INPUT menu system, The Select
button is used to Set/Activate highlighted menu
items.
Info Button
(TV, DVD, SAT/CBL, PVR/VCR)
Shows the input signal status and other
information.
Picture Mode
(TV)
Picture mode can be changed, each time it is
pressed, in the following sequence.
Input
(TV, AVR)
Press this button to change input.
Dynamic
Standard
Movie
Custom
PRO-Night
PRO-Day
Game
Energy Save Button
(TV)
Press this button to set Power Consumption
reduction based on three levels (Min, Med, Max).
Favorite Channel Button
(TV, SAT/CBL)
Press to access the Favorite Channel list.
Aspect
(TV)
Press this button to change picture size.
CONTROL BUTTONS
(SAT/CBL, DVD, PVR/VCR, AVR)
Control the functions of your Satellite Receiver,
Set-Top Box, Cable Box, DVD, VCR, PVR and
AVR. Also Control the functions of compatible
DVD players with HDMI-CEC control.
LEGENDS
TV - Television
DVD- Digital Video Disc Player
AVR - Audio/Video Receiver
NOTES
•
•
•
FIRST TIME USE
In addition to controlling all of the functions on your Hitachi LCD TV, the new remote control is designed to operate different
types of devices, such as, DVD Players, CBL (Cable Boxes), set-top-boxes, satellite receivers (SAT), VCRs and compatible
HDMI CEC DVD Players. The remote control must be programmed to control the chosen device. Please see pages 22~27 for
a complete description of all features and programming of the Remote Control.
Closed Caption (CC) Button
(TV)
Press to show and change the closed caption
mode.
VCR - Video Cassete Recorder
SAT - Satellite Receiver
PVR - Personal Video Recorder
CBL - Cable Box
The TV’s remote control sensor is located on the left bottom corner of the TV frame. To control TV functions, please point
the remote control directly at the sensor for best results.
The pause key “;“ on the Remote Control can be use to Freeze the picture on the screen, in case this key is pressed by
accident, please press it one more time to restore the moving picture.
For HDMI CEC details please see page 38.
11
Quick Setup Guide
Perform the following steps to quickly setup your new
Hitachi LCD Television Set.
1. ANTENNA CONNECTION
Air/Cable
RGB
Unless your LCD Television is connected to a cable TV system or
to a centralized antenna system, a good outdoor color TV antenna
is recommended for best performance. However, if you are located
in an exceptionally good signal area that is free from interference
and multiple image ghosts, an indoor antenna may be sufficient.
RGB
a). VHF (75-Ohm) antenna/CATV (Cable TV)
When using a 75-Ohm coaxial cable system, connect the CATV coaxial
cable to the AIR/CABLE (75-Ohm) terminal. Or if you have an antenna,
connect the coaxial cable to the same AIR/CABLE terminal.
To outdoor Antenna
or
Cable TV (CATV)
System
To Air/Cable
Terminal
b). VHF (300-Ohm) antenna/UHF antenna
When using a 300-Ohm twin lead from an outdoor antenna, connect
the VHF or UHF antenna leads to screws of the VHF or UHF adapter.
Plug the adapter into the TV Air/Cable terminal on the TV.
Rear Panel Jack
Attach an optional antenna cable mixer to the TV Air/Cable terminal
and connect the cables to the antenna mixer. Consult your dealer
or service store for the antenna mixer.
Air/Cable
To UHF antenna
To outdoor antenna
or CATV system
To Air/CableTerminal
To outdoor VHF or
UHF Antenna
Antenna Mixer
c). When both VHF and UHF antennas are connected
NOTE
Connecting a 300-Ohm twin lead connector may cause interference. Using a 75-Ohm coaxial cable is recommended.
2. CONNECT YOUR NEW HITACHI LCD TV TO THE POWER SOURCE
a). Connect the power cord to your TV set and secure it with the
AC Wire Clamp (see page 7) .
b). The Indicating Lamp will light red (Standby mode) and then
light blue (picture is shown).
AC Wire Clamp
Indicating
Lamp
a). Connect the power cord to the AC wall outlet .
4
or
3. POWER ON/OFF YOUR NEW HITACHI LCD TV
Press the POWER button on the Remote Control or the POWER
button on the Side Control Panel to power on/off the LCD TV.
NOTE
12
If the Indicating lamp is OFF, the Power Button on the
Remote Control will not operate. Please make sure
that the power cord is plugged to the AC outlet.
For Stand-By
Power OFF
5
2
3
1
TV Setup Wizard
4. FOLLOW THE TV SETUP WIZARD INSTRUCTIONS
The first time you turn on your Hitachi LCD TV, the Energy Savings
Initial Settings screen will appear. Please select either HOME or
RETAIL mode settings to advance to the TV Setup Wizard screen.
If you select HOME mode, this will save energy, and is intended
for home use. RETAIL mode will set the Picture to Dynamic default
Settings and the picture will be brighter. This setting is intended for
showroom and shop use. If later you want to change the Energy
Savings Initial Settings, you can use the Setup menu (refer to page
37).
Setup Wizard (5/8)
Please select TV RF tuning band ...
Air
Cable
Previous
Cancel
Move
FIRST TIME USE
Your Hitachi LCD television has a TV Setup Wizard feature which has the ability to help you easily setup the first time you turn on your TV
and find the channels available in your area. Please follow the instructions below.
SEL Select
The sixth step will start the scanning feature to find the channels
available on the antenna or cable system. Press the SELECT
button on the remote control to start the channel scan.
Setup Wizard (1/8)
Please select Home/Retail ...
Home
Setup Wizard (6/8)
Retail
Please check that the RF cable is
Home mode default settings are recommended
for in-home use. ENERGY STAR R qualified.
connected properly.
Scan time may take over 20 minutes.
Retail mode is intended for in-store display and
resets video settings at AC Power On.
Start
Move
NOTE
SEL Select
Retail mode is intended for showroom or shop use.
If you make adjustment changes in this mode, they
will not be saved when TV’s AC power is lost (e.g.
AC power cord unplugged).
The TV Setup Wizard screen automatically starts after the Energy
Savings Initial Settings the first time the TV is turned on.
The second step is to set the language of your TV On Screen
Menu. Select the language that you prefer. Use the p and q
CURSOR to select language and press the SELECT button on the
remote control.
Previous
Cancel
Move
SEL Select
The seventh step is the channel scanning process, it shows the
scan of digital channels first and then the analog channels next.
The scanning process will show how many channels have been
found. Please be patient while the scanning process searches
for the available channels in your area. If you wish to cancel the
process, press the SELECT button on the remote control.
Setup Wizard (7/8)
Searching, Please wait...
Setup Wizard (2/8)
Searching Digital CH
Please select language ...
English
Channel 3
Digital Channels Found
0
Analog Channels Found
0
Español
1%
Français
Skip
Previous
Move
Cancel
SEL Select
SEL Select
The third and fourth steps are to set the date and time. There are
two options; one for automatic time setting in which you will select
only the time zone in your area and the second option is a manual
setup for the date and time. Use the CURSOR pad to select and
change the options with the remote control.
NOTES
•
•
Setup Wizard (4/8)
•
Please select Time Zone ...
NST
MST
AST
PST
EST
AKST
CST
HST
Previous
Cancel
Setup Wizard (3/8)
Please select Time mode ...
Auto
Move
manual
SEL Select
Setup Wizard (4/8)
Please enter the date and time ...
Previous
Cancel
Year
SEL Select
The last step is the completion of process, it shows a brief message
and you are ready to view TV programing. This final message will
be shown for a few seconds and then the first detected channel will
be tuned in. You may also press EXIT on the remote control to tune
to the first detected channel.
2010
Month
Move
Once the user cancels the wizard, the wizard will
not be shown again.
If you see the screen above and if you did not
connect your Antenna cables to your TV, turn off
your TV, unplug the power cord and connect your
cables according to the applicable connections in
the “First Time Use” section of this Owners Guide.
After completing the TV Setup Wizard, these
screens will not appear again. For updating and
adding the channels available in your area refer to
the Add Channels to List feature on page 40.
Jan
Date
Setup Wizard (8/8)
1
Time
3:59 AM
OK
Previous
Move
Cancel
Congratulations. TV Setup is done.
SEL Select
The fifth step is designed to find broadcasting or cable channels.
There are two options, Air for an external antenna and Cable for a
cable system provider in your home. Use the p and q CURSOR
to select a source and press the SELECT button on the remote
control.
EXIT Exit
13
Side Panel Connections
USB/
The following connection diagrams are offered as suggestions. However, you may need to modify them to accommodate your particular
assortment of components and features. For best performance, video and audio cables should be made from coaxial shielded wire.
There are two SIDE panel HDMI jacks provided as a convenience to allow you to easily connect HDMI or DVI signals from a DVD,
Set-Top-Box, Video Game as shown in the following examples (When a DVI product is connected, the use of a separate audio device is
necessary for audio, use an Audio Amplifier and connect to the Audio In jacks).
DVD player
A) Connecting HDMI signal
SIDE INPUT PANEL
or
HDMI DIGITAL
OUTPUT CAPABILITY
Set-Top Box
HDMI OUT
USB/
[HDMI]
B) Connecting DVI signal
DVI DIGITAL
OUTPUT CAPABILITY
L (White)
L (White)
USB/
3
Audio Amplifier
AUDIO IN
L
R
Home video game system
[HDMI]
DVD player
OUTPUT
L
or
SIDE INPUT PANEL
R (Red)
R
Set-Top Box
R (Red)
Home video game system
3
DIGITAL OUTPUT
DVI to HDMI Cable
[DVI]
3
[HDMI]
The SIDE panel VIDEO and S-VIDEO jacks are provided as a convenience to allow you to easily connect a Camcorder, DVD, Video
Game and a VCR as shown in the following examples. (When connecting an S-VIDEO device, also connect the audio output into the
Side Audio Input jacks).
COMPOSITE VIDEO or
SIDE INPUT PANEL
S-VIDEO OUTPUT CAPABILITY
L (White)
L (White)
R (Red)
R (Red)
VIDEO (Yellow)
NOTES
•
•
•
OR
OUTPUT
S-VIDEO
L
R
DVD player
VCR
Camcorder
VIDEO (Yellow)
L (White)
L (White)
R (Red)
R (Red)
OUTPUT
VIDEO
L
R
Home video game system
Completely insert connection cord plugs when connecting to side panel jacks. If you do not, the played back picture may
be abnormal.
Cable plugs are often color-coded. Match colors of plugs and terminals, i.e. connect red to red, white to white, etc.
When making video connections, connect S-Video only or Video only. If both are connected, S-Video takes priority.
The exact arrangement you use to connect the VCR, Camcorder, DVD player, or HDTV Set-Top-Box to your LCD TV is dependent on the
model and features of each component. Check the owners guide of each component for the location of video and audio inputs and outputs.
14
Rear Panel Connections
Connect an external source to one of the INPUT terminals, then press the INPUT button to show the Inputs List. Use the CURSORS (
) to select the Input of your choice. Then press the SELECT button to confirm your choice (see page 19).
and
Input List
0. TV
1. HDMI 1
2. HDMI 2
Example: Selecting the
TV (Air/Cable) Input and
highlight “0.TV”.
3. HDMI 3
+
+
4. HDMI 4
5. Component 1
6. Component 2
7. AV1
8. AV2
9. RGB
Move
SEL Select
FIRST TIME USE
Before Operating External Video Sources
EXIT Exit
Outside antenna
or
Cable TV coaxial cable
HDMI
to
DVI
2-Way
signal
splitter
VCR
V
L
AUDIO OUT
HDMI DIGITAL
OUTPUT CAPABILITY
R
RGB
ANT
IN
DIGITAL OUTPUT
RGB
HDMI
to
HDMI
HDMI OUTPUT
RGB
Y
P /C
B
B
OUTPUT
P /C
L
R
R
R
S-Video
OUTPUT
Video
L
DIGITAL
OUTPUT CAPABILITY
R
OPTICAL
IN
Personal Computer
STEREO SYSTEM
AMPLIFIER
NOTE
HDTV SET-TOP BOX
DVD PLAYER
with Component
Output capability
DVD PLAYER
VIDEO GAME
with Composite
video capability
Cables are not included.
TIPS ON REAR PANEL CONNECTIONS
♦♦
♦♦
♦♦
♦♦
♦♦
♦♦
♦♦
♦♦
COMPONENT Y-PbPr (COMPONENT 1 & 2) or HDMI (1 & 2) connections are provided for high performance DVD players, VCRs etc.
that have this feature. Use these connections in place of the standard video connection if your device has this feature.
Refer to the owners guide of your other electronic equipment for additional information on connecting your hook-up cables.
Connect only 1 component (VCR, DVD player, camcorder, etc.) to each input jack.
Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to the TV’s Pb input and the
components R-Y output to the TV’s Pr input.
Your component outputs may be labeled Y-CbCr. In this case, connect the components Cb output to the TV’s Pb input and the components
Cr output to the TV’s Pr input.
It may be necessary to adjust TINT to obtain optimum picture quality when using the Y-PbPr inputs. (See page 31).
When using a HDMI input from a Set-Top-Box, it is recommended to use a 1080p, 1080i or 720p input signal.
When the HDMI input is a 1080p signal, it is recommended that the length of the cable should be less than 5 meters.
NOTES
• Completely insert all connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back
will be abnormal if the connection is loose.
• Cable plugs are often color-coded. Match colors of plugs and terminals, i.e. connect red to red, white to white, etc.
15
Rear Panel Connections
CONNECTING A PERSONAL COMPUTER
IN
1.
2.
Connect the RGB (D-sub 15 Pin) and AUDIO
cable from the RGB and AUDIO OUT jack of
the PC to the RGB and AUDIO jack, as shown
on the Side Panel on the right.
RGB
Use the RGB PC connection terminal and the
Analog Audio Input terminals to connect the PC.
RGB
OUT
[PC sample]
(D-sub 15 Pin) or
(Audio)
Press the INPUT button, then select RGB from
the INPUTS menu to view the signal from the
PC.
DVD player
CONNECTING A VIDEO AND STEREO AUDIO SOURCE
TO AV1
Connect the VIDEO and AUDIO cables from the VIDEO OUT
and AUDIO OUT jacks of the VCR to the AV1 (VIDEO)jacks.
A VCR connection to Rear Panel AV1 example is shown on
the right.
(Red)
(White)
(Yellow)
R
TV REAR PANEL
DVD Player/ HDTV STB
DVD player
VCR
Output
Y
Camcorder
PB
PR
Red
R
Blue
L
Green
de Dolby
Connect the Y, Pb/Cb, Pr/Cr and AUDIO cables from the Y, Pb/
Cb, Pr/Cr OUT and AUDIO OUT jacks of the DVD PLAYER or
HDTV Set-Top-Box to the COMPONENT 1 or 2 YPbPr and
AUDIO jacks. A DVD connection to Rear Panel COMPONENT
2 example is shown on the right.
Press the INPUT button, then select COMPONENT 1 or 2
from the INPUTS menu to view the program from the DVD
player or HDTV Set-Top Box.
L
Home video game system
Red
2.
Camcorder
OUTPUT
VIDEO
Press the INPUT button, then select AV1 from the INPUTS
menu to view the program from the VCR.
CONNECTING A COMPONENT AND STEREO AUDIO
SOURCE TO COMPONENT 1 or 2: YPbPr
1.
RGB
White
2.
VCR
VCR
RGB
1.
TV REAR PANEL
Home video game system
NOTES
•
•
•
16
Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played
back will be abnormal if the connection is loose.
Cable plugs are often color-coded. Match colors of plugs and terminals, i.e. connect red to red, white to white, etc.
To return to the last channel viewed, select “0.TV” from the INPUTS menu.
Rear Panel Connections
2.
With DVI output devices, connect a DVI to HDMI cabel to the
HDMI 1 input. Connect the audio out L and R cables to DVI
Audio Input or connect the audio cables from the Audio output
jack from the HDTV set top box or DVD player to an external
audio amplifier as shown to the right.
3.
Press the INPUT button, then select HDMI 1 or 2 to view the
program from the HDTV SET-TOP BOX or DVD player.
NOTES
• Completely insert the connection cord plugs when
connecting to the rear panel jacks. The picture and
sound that is playing back will be abnormal if the
connection is loose.
• When using a DVI to HDMI cable, connect the Audio
Out L and R cables to an external audio amplifier.
• The HDMI input on HDMI 1, 2, 3 and 4 contains
the copy protection system called High-bandwidth
Digital Content Protection (HDCP). HDCP is a
cryptographic system that encrypts video signals
when using HDMI connections to prevent illegal
copying of video contents.
• HDMI is not a “NETWORK” technology. It
establishes a one-way, point-to-point connection for
delivery of uncompressed video to a display.
• The connected digital output device controls the
HDMI interface, so proper set-up of device user
settings determines final video appearance.
• Only HDMI 1 can support DVI audio input.
CONNECTING AN EXTERNAL AUDIO AMPLIFIER
To monitor the audio level of the LCD TV to an external audio
amplifier, connect the system as shown on the right. The DIGITAL
OUT and AUDIO OUT from the Rear Panel is a fixed output. The
Volume of the amplifier is controlled by the amplifier, not by the
LCD Television.
The DIGITAL OUT terminal outputs all audio sources to equipment
with Optical IN capability.
1.
2.
Connect an optical cable from the DIGITAL OUT to the
OPTICAL IN of a separate Stereo System Amplifier as shown
on the Rear Panel on the right.
Connect an RCA stereo cable from the AUDIO OUT to the
Audio input of a separate Stereo System Amplifier as shown
on the Rear Panel on the right.
NOTES
NOTES
•
•
•
HDMI DIGITAL
OUTPUT CAPABILITY
DVD Player/
Recorder
DVD player
HDMI OUT
VCR
[HDMI] [HDMI]
Camcorder
RGB
DVI to HDMI Input
TV REAR PANEL
DVI DIGITAL
OUTPUT
Home videoCAPABILITY
game system
DVD Player/
Recorder
DVD player
DIGITAL OUTPUT
VCR
[HDMI]
[DVI]
Audio Output
Camcorder
L
R
RGB
(Red)
Connect the HDMI or DVI to HDMI connection cable from the
output of the HDTV set top box or DVD player to the HDMI
input as shown near the Rear panel at right.
(White)
1.
HDMI Input
TV REAR PANEL
FIRST TIME USE
CONNECTING AN EQUIPMENT SOURCE WITH HDMI
OR DVI CAPABILITY TO HDMI 1 & HDMI 2
Home video game system
Or
AUDIO IN
L
R
AUDIO AMPLIFIER
Note : An external Audio amplifier can be
used for the same purpose.
TV REAR PANEL
Optical cable
Or
OPTICAL
IN
R
AUDIO IN
L
STEREO SYSTEM
AMPLIFIER
RCA Stereo cable
Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played
back will be abnormal if the connection is loose.
Cable plugs are often color-coded. Match colors of plugs and terminals, i.e. connect red to red, white to white, etc.
To return to the last channel viewed, select “0.TV” from the INPUTS menu.
17
The Remote Control
POWER button
Press this button to turn the TV set on or off.
DEVICE buttons
In addition to controlling all the functions on your HITACHI LCD
TV, the new remote control is designed to operate different
types of VCRs, cable boxes, set-top-boxes, satellite receivers,
DVD players, and other audio/video equipment with one touch.
Basic operation keys are grouped together in one area.
To operate your LCD TV, select TV by pressing the TV button on
the remote control. The TV mode indicator will blink, indicating
that the remote will now control your television.
Repeat the same procedure for your DVD (press the DVD
button), for your PVR/VCR (Personal Video Recorder) press
the PVR/VCR button on the remote. For your cable box, settop-box or satellite receiver (press the SAT/CBL button), for
your Audio/Video System (press the AVR button). See pages
22~27 for instructions on how to program the remote to control
your device.
CHANNEL SELECTOR / ENTER buttons
The CHANNEL SELECTOR buttons are used to select channels,
lock access code, etc. Use the CHANNEL SELECTOR buttons
to enter one, two, or three numbers to select channels. Enter 0
first for channels 1 to 9, or simply press the single digit channel
you wish to tune, then press the ENTER button for the TV to
tune. Channel selection may also be performed by CHANNEL
(CH) UP ( ) or CHANNEL (CH) DOWN ( ).
(-) DASH /Sleep Button
Use the (-) DASH button with the CHANNEL SELECTOR
buttons to enter Digital Channels that have subchannel
numbers indicated by (-) DASH (example 15-1). Also press to
Set the Sleep Timer from 5 minutes to 4 hours.
LAST CHANNEL button
Press this button to toggle between the current and
last channel viewed.
8
VOLUME (VOL), MUTE button
Press the VOLUME button (+ or -) until you obtain the desired
sound level.
Press the MUTE button to turn the sound off completely (MUTE).
To restore the sound, press the MUTE button one more time,
or VOL UP (+).
Volume
10
Mute
MUTE
18
How to Use the Remote to Control your TV
Closed Captioning will display automatically when MUTE is on
and Closed Caption is set to With Mute (see page 37).
When the TV power is turned off at a volume level 21 or greater,
the volume level will default to 20 when the TV is turned on.
However, if it is set to a level 20 or less, the volume level will
be at the level it was set when the TV is turned off.
MENU button
The MENU button will start the On-Screen Display.
EXIT button
This button will exit all On-Screen Displays.
• Press the INFO button again or the EXIT button to
return to normal viewing.
• The Aspect INFO will not be shown when the INFO
key is pressed.
GUIDE button
Press this button to access the Channel Guide of your Satellte
receiver, Set Top Box or Cable Box while in SAT/CBL mode.
INPUT button
Press this button to access the INPUTS menu. Use the CURSOR
and SELECT buttons to scroll and select the inputs that are being
used. Pressing the INPUT button repeatedly will also cycle through
the Inputs menu items. Then press the SELECT button or wait 4
seconds to automatically select the highlighted input.
+
INFO button
Press this button when you want to check the channel being
received, the picture source, if the channel has stereo (ST) or
second audio program (SAP), the time, and CHANNEL ID.
+
REMOTE CONTROL
CURSOR PAD /SELECT button
All the On-Screen Display features can be set or adjusted
by using the CURSOR PAD and the SELECT button, except
for numeric entries. Press the CURSOR PAD toward desired
direction and press the SELECT button to select.
NOTES
ANALOG CHANNELS
INFO
ATV
39-0
NBC
Input List
Main Picture Source
& Channel Indication
Broadcast Channel
Indication
0. TV
1. HDMI 1
2. HDMI 2
3:17PM
No Program Title.
No Program Description.
Analog
TV-G
Stereo+SAP
Clock
Broadcast Rating
Audio Broadcast
3. HDMI 3
4. HDMI 4
Analog Channel
Program Information
5. Component 1
6. Component 2
DIGITAL CHANNELS
DTV
INFO
15-1
KPBS-HD
Sesame Street
Program Description.
Program Information
3:00PM- 3:30PM
1080i
3:17PM
TV-G
Multi
9. RGB
Move
SEL Select
EXIT Exit
Program Picture Format
Run Time
INFO
HDMI
Program Information
8. AV2
Clock
Broadcast Rating
Audio Broadcast
VIDEO INPUTS
No Program Title.
No Program Description.
7. AV1
Main Picture Source
& Channel Indication
Broadcast Channel
Indication
3:17PM
Main Picture Source
Clock
0.
1.
2.
3.
4.
5.
6.
7.
8.
9.
TV
HDMI 1
HDMI 2
HDMI 3
HDMI 4
Component 1
Component 2
AV 1
AV 2
RGB
Watch TV from an Air or Cable signal.
Select to choose HDMI 1 Input.
Select to choose HDMI 2 Input.
Select to choose HDMI 3 Input.
Select to choose HDMI 4 Input.
Select to choose Component Input 1.
Select to choose Component Input 2.
Select to choose AV1 Input.
Select to choose AV2 Input.
Select to choose PC input
1080i
Picture Format
19
How to Use the Remote to Control your TV
ASPECT button
Press this button to quickly change the picture format ASPECT ratio. Depending on the input ratio, ASPECT allows you to adjust the
image through the following options.
Auto
Use this aspect mode to have the aspect mode change automatically
by signal detector.
4:3
Use this aspect mode to display conventional (4:3) images. Side
panels (black areas) are placed to the left and right of the image to
preserve the original aspect ratio of the source.
Full
Use this aspect mode to display 16:9 sources like HDTV and
DVD’s preserving the original 16:9 aspect ratio showing 100% of
the size.
Zoom1/Zoom2
Use these aspect modes to zoom in and to reduce the black bars.
16:9
Use this aspect mode to display 16:9 sources like HDTV and DVD’s
preserving the original 16:9 aspect ratio showing 95% of the size.
•
•
•
AIR/CABLE - Analog Signal
AIR/CABLE - Digital Signal
Component
IMAGE
INPUT
Auto
Zoom2
•
AV
IMAGE
INPUT
•
•
•
HDMI - VGA
DVI - VGA
RGB
IMAGE
INPUT
•
•
HDMI - 1080p/1080i/720p/480p/480i
DVI - 1080p/1080i/720p/480p/480i
IMAGE
INPUT
4:3
•
•
•
20
16:9
Zoom1
Auto
Full
Auto
16:9
Zoom1
Zoom2
Zoom2
NOTES
4:3
4:3
16:9
Zoom1
Full
Each input has memory for the Aspect setting. Changing the aspect on one input will not affect the aspect settings on
other inputs.
When displaying “Full” you may notice noise at the top of the picture. Select the “16:9” aspect mode to remove the noise.
The noise is normal for some signals.
See page 55 for Aspect availability according to signal format in use.
How to Use the Remote to Control your TV
ENERGY SAVE (E.SAVE) button
Use this button to choose power consumption reduction
settings based on 3 levels (Min, Medium, Max). See page 37
for further details.
CLOSED CAPTIONS (C.C.) button
Use this button to display the dialogue, narration, and/or
sound effects of a television program or home video which
are displayed on the TV screen when available. Your local TV
program guide denotes these programs as
or
.
FAV CH button
Favorite CH List
FAV CH
DIGITAL CH
0. Ch 5-0
1. Ch 7-0
2. Ch 9-0
ANALOG CH
3. Ch 11-0
Move
SEL Select
REMOTE CONTROL
Press the FAV CH button to display the Favorite CH List. You
have to first setup the Favorite Channels in the Channels Menu
in order display the list. Press the FAV CH key on the remote
control to display the list and select the desired channel using
the CURSOR PAD and then press SELECT to view.
EXIT Exit
Picture mode (P.MODE) button
Press this button to toggle between Dynamic, Standard,
Movie, Custom, Game, Pro-Day and Pro-Night picture
mode settings. Select Dynamic for automatic brightness and
contrast adjustment. Select Standard for day time viewing
with more brightness and contrast to compete with room light.
Select Movie for viewing with less brightness and contrast
for a more detailed picture. Select Custom for viewing with
your own brightness and contrast picture settings. Game for
automatic brightness and contrast adjustment when playing
video games. PRO modes are for your custom calibration
settings. (see page 30 for setting changes).
8
Device Control buttons
These buttons can control external devices (i.e. PVR/VCR,
DVD, etc.) directly depending on the device mode set on the
remote control. Also, these buttons are for controlling devices
with Consumer Electronics Control (CEC) through the HDMI
connection like Blu-Ray or DVD players, DVR, STB while in
TV mode.
NOTE
or some devices, these keys are not available
F
to control through the TV and HDMI connection;
please refer to the device’s owners guide for more
information.
21
How to Use the Remote to Control your AV Equipment
OPERATING THE PRECODED FUNCTIONS FOR YOUR AV EQUIPMENT.
The new remote control is designed to operate different types of VCRs, cable boxes, set-top-boxes, satellite receivers, DVD players, and
other audio/video equipment. You must first program the remote to match the remote system of your AV equipment (refer to pages 26~27
for a preprogrammed code number).
AV COMPONENT CONTROL SETUP PROCEDURE
1.
Turn on your AV Component.
2.
Select the desired mode: DVD, PVR/VCR, SAT/CBL or AVR
by pressing the corresponding button.
3.
Hold down the device button (DVD, PVR/VCR, SAT/CBL or
AVR) on the remote and enter the four digit preset code that
matches your device as shown on pages 26~27.
4.
Release the device button.
5.
If done correctly, the device LED indicator will blink 3 times to
confirm proper setup.
6.
The remote will now control the desired device.
Power
button
Device
buttons
Numeric
buttons
SETUP EXAMPLE (Hitachi Cable Box with precode 0003)
1.
Turn ON your Cable box.
2.
Select Cable mode by using your SAT/CBL button to position
the LED indicator on SAT/CBL.
3.
Hold down the SAT/CBL button on the remote and press the
numbers 0, 0, 0 and 3.
4.
Release the SAT/CBL button.
5.
The indicator light will flash 3 times if the code was accepted.
6.
Aim the remote at the cable box and press the POWER
button. The remote will turn off your cable box when the
correct four digit preset code is entered. When this occurs, the
remote control is programmed for your cable box. If the cable
box does not turn off, try a different four digit preset code.
7.
The remote will now control your Cable box.
Repeat the same procedure for your set-top-box or satellite
receiver (select SAT/CBL), your DVD (select DVD), your VCR/
PVR(select VCR/PVR), or your AVR (select AVR).
NOTES
•
•
•
22
If your AV component cannot be operated after performing the above procedures, your AV component code has not been
preprogrammed into the remote.
In the unlikely event that your AV component cannot be operated after performing the above procedures, please consult
your AV component owners guide.
The remote control will remember the codes you have programmed even after the batteries are removed from the remote
control. To reset all programmed codes to factory default place remote control in TV mode, then press and hold TV mode
key and enter “9”, “8”, “1” in sequence.
How to Use the Remote to Control your AV Equipment
Set-Top-Box/
Satellite Receiver
Device Button
Cable Device
Button
REMOTE CONTROL
MY CABLE BOX CODE IS:_____________________
NOTE
Refer to the instruction manual of the Cable Box
for operation of the buttons exclusively for the
Cable Box.
MY SET-TOP-BOX/SATELLITE RECEIVER
CODE IS:_____________________
NOTE
Refer to the instruction manual of the Set-TopBox/Satellite Receiver for operation of the buttons
exclusively for the Set-Top-Box/Satellite Receiver.
PRECODED CABLE BOX buttons
These buttons transmit the chosen precoded
cable codes :
-Power
-Cursor & Select
-Number PAD
-Menu
-Info
-Enter
-Exit
-Channel Up & Down
-Dash (-)
-Guide
-Last CH
-Fav CH
-Play, Stop, Pause, RWD, FWD, Skip
-Color Buttons
FWD, Skip RWD, Record.
PRECODED SET-TOP BOX/SATELLITE buttons
These buttons transmit the chosen precoded Set-TopBox/Satellite Receiver codes :
-Power
-Cursor & Select
-Number PAD
-Menu
-Info
-Enter
-Exit
-Channel Up & Down
-Dash (-)
-Guide
-Last CH
-Fav CH
-Play, Stop, Pause, RWD, FWD, Skip
-Color Buttons
FWD, Skip RWD, Record.
EXCLUSIVE TV buttons
These buttons are for operating the TV :
-Input
-P. Mode
-CC
-Mute
-Aspect
-Vol Up & Down
-E. Save
EXCLUSIVE TV buttons
These buttons are for operating the TV :
-Input
-P. Mode
-CC
-Mute
-Aspect
-Vol Up & Down
-E. Save
23
How to Use the Remote to Control your AV Equipment
DVD
Device
Button
MY DVD PLAYER CODE IS:_____________________
NOTE
24
Refer to the instruction manual of the DVD
Player for operation of the buttons exclusively
for the DVD Player.
PVR/VCR
Device Button
MY VCR/PVR CODE IS:______________________
NOTE
Refer to the instruction manual of the PVR/VCR
for operation of the buttons exclusively for the
PVR/VCR.
PRECODED DVD buttons
These buttons transmit the chosen precoded DVD
codes :
-Play, Stop, Pause,
-Power
-Number PAD
RWD, FWD, Skip
-Menu
-Info
FWD, Skip FWD
-Cursor & -Channel Up & Down
Select
-Record
-Exit
Guide
-Dash
-Enter
PRECODED VCR/PVR buttons
These buttons transmit the chosen precoded VCR/PVR
codes :
-Power
-Cursor & Select
-Enter
-Menu
-Channel Up & Down
-Dash(-)
-Exit
-Number PAD
-Play, Pause,
Stop, FWD,
-Info
-Last CH
Skip FWD
-Record
-RWD, Skip RWD
-FAV CH (Only for VCR)
EXCLUSIVE TV buttons
These buttons are for operating the TV :
-Input
-P. Mode
-CC
-Aspect
-Vol Up & Down -Mute
-E. Save
EXCLUSIVE TV buttons
These buttons are for operating the TV :
-Input
-P. Mode
-CC
-Aspect
-E.Save
-Vol Up & Down
-Mute
How to Use the Remote to Control your AV Equipment
AVR Device
Button
MY AUDIO/VIDEO RECEIVER (AVR)
CODE IS:______________________
NOTE
Refer to the instruction manual of the AVR for
operation of the buttons exclusively for the
AVR.
PRECODED AVR buttons
These buttons transmit the chosen precoded AVR
codes :
-Power -Cursor & Select
-Vol Up & Down
-Channel Up & Down
-Number PAD
-Input
-Record
-Mute
-Play, Pause, Stop,
RWD, Skip RWD,
FWD, Skip FWD,
-Enter
EXCLUSIVE TV buttons
These buttons are for operating the TV :
-Aspect
-P. Mode
-CC
-E.Save
-Info
REMOTE CONTROL
-Menu
-Exit
25
Remote Control Codes
CABLE Brand
A-MARK
ABC
ACCUPHASE
ACORN
ACTION
CODES
0008,0144
0237,0003,0008
0003
0237
0237
ACTIVE
ADB
ARCHER
BCC
BRITISH
TELECOM
CENTURY
DIGEO
DIGI
DIRECTOR
DUMONT
FOSGATE
GE
GENERAL
INSTRUMENT
GIBRALTER
GOLDSTAR
HITACHI
INSIGHT
JERROLD
0237
2092,2586
0237
0276
0003
0008
1187,2187
0637
0476
0637
0276
0144
0476,0810,0276
0003
0003
0144
0003,0008
0476,0810
0476,0810,0276
0003
MEMOREX
0000
MITSUBISHI
0003
MOTOROLA
1376,0476,0810
0276,1187,1254
1106
NOVA VISION
0008
NOVAPLEX
0008
NSC
0637
PACE
1877,0877,0237
0008
PANASONIC
0000,0008,0144
PANTHER
0637
PARAGON
0000,0008,0525
PENNEY
0000,0637
PHILIPS
1305,0317
PIONEER
1877,0877,0144
0533
PULSAR
0000
QUASAR
0000
REGAL
0276
RUNCO
0000
SAMSUNG
0003,0144
SASKTEL
1737
SCIENTIFIC
1877,0877,0477
ATLANTA
0237,0003,0000
0008
SONY
1006
SPRUCER
0144
STARCOM
0003
STORM
0637
SUPERCABLE 0276
TORX
0003
TOSHIBA
0000
UNITED CABLE 0276,0003
US
0276,0003,0008
ELECTRONICS
VIDEOWAY
0000
ZENITH
0000,0525
CABLE/PVR
COMBO
DIGEO
GENERAL
INSTRUMENTS
JERROLD
MOTOROLA
PACE
PIONEER
SASKTEL
SCIENTIFIC
ATLANTA
SONY
SUPERCABLE
SATELLITE
BRAND
(Set Top Box)
BELL
EXPRESSVU
CHAPARRAL
COOLSAT
26
CODES
1187,2187
0810
0810
1376,0810,1187
1106
1877,0237
1877,0877
1737
1877,0877
1006
0276
CROSSDIGITAL 1109
DIRECTV
1377,0392,0566
0639,1639,1142
0247,0749,1749
0819,1856,1076
1108,0099,1109
1392,1414,1442
1443,1609,1640
DISH
1505,1005,0775
NETWORK
1170,1775
SYSTEM
DISHPRO
1505,1005,0775
1775
ECHOSTAR
1505,1005,0775
1170,1775
EXPRESSVU
0775,1775
FORTEC STAR 1821
FUNAI
1377
GE
0392,0566
GENERAL
0869
INSTRUMENTS
GOI
0775,1775
HITACHI
0749,0819,1250
HOUSTON
0775
HTS
0775,1775
HUGHES
1142,0749,1749
NETWORK
1442,1443
SYSTEMS
INNOVA
0099
JERROLD
0869
JVC
0775,1170,1775
LG
1414
MAGNAVOX
0722
MCINTOSH
0869
MITSUBISHI
0749
MOTOROLA
0869,0856
NETSAT
0099
NEXT LEVEL
0869
PANASONIC
PANSAT
PHILIPS
PIONEER
PRIMESTAR
PROSCAN
RADIOSHACK
RCA
SAMSUNG
SKY
SONY
STAR CHOICE
STAR TRAK
THOMSON
TIVO
TOSHIBA
ULTIMATE TV
ULTRASAT
UNIDEN
VOOM
ZENITH
SAT/PVR
COMBO
BELL
EXPRESSVU
DIRECT TV
DISH
NETWORK
SYSTEM
DISH PRO
ECHOSTAR
EXPRESSVU
HUGHES
NETWORK
SYSTEMS
JVC
MOTOROLA
PHILIPS
PROSCAN
RCA
SAMSUNG
SONY
STAR CHOICE
TIVO
ZENITH
CODES
VCR Brand
A-MARK
0775,1170
ABS
ACCURIAN
ADMIRAL
0216
1806,2147
0247,0701
1807
1142,0749,1749
0775,0819,1076
0722,0099,1442
1142,1442
0869
0392,0566
0566,0775,0869
0392,0566,1142
0775,0855,0143
1392,1442
1377,1142,1276
1108,1109,1442
1609
0856,0099
0639,1639,1640
0869
0869
0392,0566
1142,1442,1443
0749,1749,0790
1392,1640
1806
0722
0869
0856,1856,1810
CODES
0775,1170
1377,0392,0639
1142,1076,0099
1392,1442,1443
1640
1505,0775
1505,0775
1505,0775,1170
0775
1142,1442,1443
1170
0869
1142,1442
0392
1392
1442
0639,1640
0869
1142,1442,1443
1810
CODES
0037,0240,0000
0278,0046
1972
0000
0060,0048,0039
0047,0104,0209
0065,0479
ADVENTURA
ADYSON
AIKO
AIWA
AKAI
ALBA
ALIENWARE
ALLEGRO
AMERICA ACTION
AMERICAN HIGH
AMSTRAD
ASHA
ASTRA
AUDIOVOX
AVIS
BEAUMARK
BELL & HOWELL
0037,0240,0000
0072
0278
0037,0000,0124
0041,0175
0209,0072,0278
1972
0039
0278
0035,0081
0000
0240
0035,0081
0000
0000,0072
0240
0035,0048,0039
0000,0104,0046
0479
BROKSONIC
0184,0121,0209
0002,0479
CALIX
0037
CANDLE
0037,0038
CANON
0035
CAPEHART
0002
CARRERA
0240
CARVER
0035,0081
CCE
0072,0278
CINERAL
0278
CITIZEN
0035,0037,0240
0000,0209,0278
0479
CLASSIC
0037
COLORTYME
0060,0035,0045
0278
COLT
0000,0072
CRAIG
0037,0047,0240
0072
CRITERION
0000,0072
CROSLEY
0035,0081,0000
CROWN
0072,0278
CURTIS MATHES 0060,0035,0162
0240,0000,0041
0278,0432
CYBERNEX
0240
CYBERPOWER
1972
DAEWOO
0037,0045,0278
0046
DAYTRON
0037,0278
DELL
1972
DENON
0081,0042
DERWENT
0041
DIRECTV
0739
DUAL
0000
DURABRAND
0039,0038
DYNATECH
0240,0000
ELECTROHOME 0060,0037,0240
0000,0043,0209
ELECTROPHONIC 0037
EMERALD
0184,0121
EMEREX
0032
EMERSON
0037,0184,0240
0000,0121,0043
0209,0002,0278
0479,1593
FISHER
0039,0047,0000
0104,0046
FUJI
0035,0033
FUJITSU
0000
FUNAI
0037,0000,0072
0278,1593
GARRARD
0000
GATEWAY
1972
GE
0060,0035,0048
0240,0000,0065
GEMINI
0060
GENEXXA
0037,0000,0278
GO VIDEO
0240,0432,0526
0614
GOLDSTAR
0035,0037,0039
0000,0278,0038
GOODMANS
0037,0081,0000
0072,0278
GRADIENTE
0000
GRANADA
0081,0042
GRUNDIG
0081
HARLEY DAVISON 0000
HARMAN/
0081,0038
KARDON
HARVARD
0072
HARWOOD
0072
HEADQUARTER 0046
HEWLETT
1972
PACKARD
HI-Q
0035,0047,0000
HITACHI
0035,0037,0045
0000,0042,0041
0065,0105
HOWARD
1972
COMPUTERS
HP
1972
HUGHES
0042,0739
NETWORK
SYSTEMS
HUMAX
0739,1797,1988
HUSH
1972
HYTEK
0047,0000,0072
IBUYPOWER
1972
INSTANT
REPLAY
ITT NOKIA
JANEIL
JENSEN
JVC
KEC
KENWOOD
0035
0240,0041
0240
0067,0041
0067,0041,1162
0037,0278
0067,0041,0038
0046
KLH
0072
KODAK
0035,0037
KTV
0000
LG
0037,0240,0038
1037
LINKSYS
1972
LLOYD’S
0240,0000,0072
0038
LOEWE
0081
LOGIK
0240,0000,0072
LUMATRON
0278
LUXOR
0046
LXI
0037,0000,0042
0067
M ELECTRONIC 0240
MAGNASONIC 0037,0240,0000
0072,0278
MAGNAVOX
0035,0037,0048
0039,0081,0240
0000,0563,0618
1593
MAGNIN
0240
MARANTZ
0035,0081,0038
MARTA
0037
MATSUI
0037,0209
MATSUSHITA
0035,0162,0081
1162
MEDIA CENTER 1972
PC
MEI
0035
MEMOREX
0035,0162,0037
0048,0039,0047
0240,0000,0104
0209,0072,0278
0046,0479,1037
1162
METZ
0037
MGA
0060,0240,0043
MGN
0240
TECHNOLOGY
MICROSOFT
1972
MIDLAND
0240
MIND
1972
MINOLTA
0042,0105
MITSUBISHI
0060,0048,0047
0000,0042,0067
0043,0041
MOTOROLA
0035,0048
MOVIE WALKER 0072
MTC
0240,0000,0072
MTX
0000
MULTITECH
0039,0000,0072
NAD
0240,0104
NEC
0104,0067,0041
0038
NEW TECH
0072
NIKKO
0037,0278
NIKKODO
0037,0278
NISHI
0240
NIVEUS MEDIA 1972
NOBLEX
0240
NORTHGATE
1972
OLYMPUS
0035,0162,0104
ONKYO
0222
OPTIMUS
1062,0035,0162
0037,0048,0047
0240,0000,0104
0432,1048,1162
ORION
0184,0240,0000
0104,0121,0209
0002,0278,0479
PANAMA
0035
PANASONIC
1062,0035,0162
0000,0225,0614
0616,1162
PENNEY
0035,0162,0037
0047,0081,0240
0000,0042,0067
0038
PENTAX
0042,0065,0105
PHILCO
0035,0081,0000
0209,0479
PHILIPS
0035,0162,0048
0081,0045,0000
0209,0616,0618
0739,1081,1181
PILOT
0037
PIONEER
0162,0081,0042
0067,1337
POLK AUDIO
0081
PORTLAND
0278
PRESIDIAN
1593
PROFITRONIC 0240
PROSCAN
0060
PROTEC
0000,0072
PROTECH
0072
PULSAR
0039,0240,0278
PULSER
0240
QUARTER
0046
QUARTZ
QUASAR
0035,0047,0046
0035,0162,0002
1162
RADIOSHACK
0035,0162,0037
0048,0047,0240
0000,0104,0046
1037,1162
RADIX
0037
RANDEX
0037
RCA
0060,0035,0048
0240,0045,0000
0042,0065,0105
0880
REALISTIC
0035,0162,0037
0048,0047,0240
0000,0104,0121
0278,0046,0065
1162
REPLAY TV
0614,0616
RICAVISION
1972
RUNCO
0039
SAMSUNG
0060,0240,0045
0000,0038,0432
0739
SAMTRON
0240
SANKY
0048,0039
SANSUI
0240,0000,0067
0209,0041,0072
0002,0479
SANYO
0047,0240,0000
0104,0046,0159
0479
SCOTT
0184,0045,0121
0043
SEARS
0060,0035,0162
0037,0048,0039
0047,0033,0045
0000,0042,0104
0067,0043,0209
0041,0072,0046
0065,0105
SHARP
0048,0047,0032
0000,0065,0848
SHINTOM
0039,0240,0000
0072
SHOGUN
0240
SIEMENS
0037,0104
SIGNATURE
0060,0035,0037
0048,0000,0046
0065,0479
SINGER
0037,0240,0072
SONIC BLUE
0614,0616
SONOGRAPHE
0046
SONY
0035,0047,0032
0033,0000,0067
0046,0636,1032
1972
SOUNDMASTER 0000
STACK 9
1972
STS
0042,0105
SV2000
0000,0072
SVA
0000
SYLVANIA
0035,0081,0000
0043,1593
SYMPHONIC
0240,0000,0002
1593
SYSTEMAX
1972
TAGAR SYSTEMS 1972
TANDY
0000,0104
TASHIKO
0037
TATUNG
0048,0081,0000
0067,0041
TEAC
0000,0067,0041
TECHNICS
0035,0162,0037
0000
TEKNIKA
0035,0037,0000
TELECORDER
0240
TELEFUNKEN
0041
TEVION
0479
THOMAS
0000,0002
THOMSON
0060,0041
TISONIC
0278
TIVO
0618,0636,0739
1337
TMK
0240,0000
TNIX
0037
TOCOM
0240
TOSHIBA
0240,0045,0000
0043,0209,0041
1008,1972,1988
TOSONIC
0278
TOTEVISION
0037,0240
TOUCH
1972
TRIX
0037
ULTRA
0045,0278
UNITECH
0240
VECTOR
0045
VECTOR
0184,0038
RESEARCH
VEXTRA
0072
VICTOR
0067,0041
VIDEO
0045
CONCEPTS
VIDEOMAGIC
0037
VIDEOSONIC
0240,0000,0072
VIEWSONIC
1972
VILLAIN
0000
VOODOO
1972
Remote Control Codes
WARDS
0060,0035,0037
0048,0047,0081
0033,0240,0045
0000,0042,0043
0041,0072,0038
0479,0065,0046
WHITE
0000,0209,0072
WESTINGHOUSE 0278,0479
WORLD
0209,0002,0479
XR-100
0035,0240,0000
0072
YAMAHA
0041,0038
ZENITH
0037,0039,0033
0000,0209,0041
0278,0479,1139
ZT GROUP
1972
CODES
1972
1972
1972
1972
0739
1972
0614
1972
REPLAY TV
SAMSUNG
SONIC BLUE
SONY
STACK 9
SYSTEMAX
TAGAR
SYSTEMS
TIVO
0614,0616
0739
0614,0616
0636,1972
1972
1972
1972
TOSHIBA
TOUCH
VIEWSONIC
VOODOO
ZT GROUP
1972
1972
0739
0739,1797,1988
1972
192
1972
1972
1972
1972
1972
1972
0614,0616
0618,0739
1337
0880
0618,0636,0739
1337
1008,1972,1988
1972
1972
1972
1972
DBS/PVR
COMBO
DIRECTV
HUGHES
NETWORK
SYSTEMS
PHILIPS
SAMSUNG
TIVO
CODES
DVD/PVR
COMBO
HUMAX
PIONEER
RCA
SYLVANIA
TIVO
TOSHIBA
CODES
DVD Brand
3D LAB
ACCURIAN
ACOUSTIC
SOLUTIONS
ADCOM
AFREEY
AIWA
AKAI
CODES
0503,0539
0675,1416
0730
ALBA
ALCO
ALLEGRO
0739
0739
0739
0739
0739
1797,1988
1337
0880
0000
1337
1008,1988
1094
0698
0641
0695,0705,0770
1089
0672
0790
0869
LITEON
1058,1158,1416
1440
0741
0783
0675
0503,0539,0646
0675,1354,1506
MALATA
1159
MARANTZ
0503,0539,0646
0675,1354,1506
MCINTOSH
1533,1273
MEMOREX
0695,0831,1270
2213
MICROSOFT
0522,2083
MINATO
0752
MITSUBISHI
1521,0521
MUSTEK
0730
MYRAD
0894
NAD
0741
NAIKO
0770
NEC
0785,0869
NEXXTECH
1402
NINTAUS
1051
NORCENT
1003,0872,1107
1265
ONKYO
0503,0627,1769
OPPO
0575,1224,1525
2185
OPTIMUS
0571
PALSONIC
0672,0852
PANASONIC
0503,0490,0571
0703,1641,1762
PHILCO
0675
PHILIPS
0503,0539,0646
0675,1267,1340
1354,2056,2084
PIANODISC
1024
PIONEER
0525,0571,0142
0631,1571
POLAROID
1020,1061,1086
POLK AUDIO
0539
PORTLAND
0770
PRESIDIAN
0675
PRIMA
2126,2127
PROCEED
0672
PROSCAN
0522
PROVISION
0778
RADIONETTE
0741
RADIOSHACK
0571
RCA
0522,0571,0790
0822,1769
REALISTIC
0571
REOC
0752
RIO
0869
RJTECH
1360
ROTEL
0623,1178
SAMPO
0698,0752
SAMSUNG
0490,0573,0744
0199,0820,1044
1075,2069
SANSUI
0695
SANYO
0675,0695,0873
1919
SCHNEIDER
0783
SCHWAIGER
0752
SENSORY SCIENCE 1158
SHARP
0630,0675,0752
1256
SHERWOOD
0633,0770,1043
1077
SHINSONIC
0533
SLIM ART
0784
SM ELECTRONIC
0730
SONIC BLUE
0573,0715,0783
0869,1099
SONY
0533,1533,0864
1033,1070,1431
1516,1536
SYLVANIA
0675
SYMPHONIC
0675
TAG MCLAREN
0894
TATUNG
0770
TEAC
0571,0790
0490,0703
TECHNICS
0770
TECHNIKA
0730
TECHSONIC
0571
THETA DIGITAL
0522
THOMSON
1503
TIVO
0503,0573,0539
TOSHIBA
0695,1154,1503
1608,1769
0800,0803
TREDEX
0770
UNIMAX
0730
UNITED
0591
UNIVERSUM
URBAN CONCEPTS 0503,0539
1064,1226
V
0790
VENTURER
1064,1226
VIZIO
LOEWE
LOGIX
MAGNASONIC
MAGNAVOX
ZEUS
ZOECE
1360
0522,2083
0490,0539,0545
0497
0872
0503,0591,0741
0869
0784
1265
BLU-RAY DISC
LG
PANASONIC
PHILIPS
PIONEER
SAMSUNG
SONY
CODES
0741
1641
2084
0142
0199
1516
DVD/PVR
COMBO
GO VIDEO
PANASONIC
PHILIPS
PIONEER
RCA
SHARP
SONY
SYLVANIA
TOSHIBA
CODES
HD-DVD
LG
MICROSOFT
ONKYO
RCA
TOSHIBA
XBOX
CODES
0741
2083
1769
1769
1769
2083
VOCOPRO
XBOX
YAMAHA
YAMAKAWA
ZENITH
1730
0490
1340
0631
0522
1256
1033,1070,1536
0675
1503
AUDIO
CODES
RECEIVER Brand
AIWA
1405,0189,0121
1243,1388,1641
ALCO
1390
ANAM
1609
APEX DIGITAL
1774
ARCAM
1189
AUDIOTRONIC
1189
AUDIOVOX
1390
B&K
0820,0840
BOSE
0639,1253,1933
BRIX
1602
CAIRN
0189
CARVER
1189,0189,0121
CURTIS MATHES 0014
DELPHI
1414
DENON
1360,0121,1142
1306
ELECTROHOME 2026
GRUNDIG
0189
HARMAN/
0189,0891,1304
KARDON
1306
HITACHI
0228
INSIGNIA
1030,2169
INTEGRA
0842,1298,1320
1805
JBL
1306
JVC
1058,1374,1495
1811
KAWASAKI
1390
KENWOOD
1570,1569
KLH
1390,1428
KOSS
1497
LG
2197
LINN
0189
LIQUID VIDEO
1497
MAGNAVOX
1189,1269,0189
1266,1514
MARANTZ
1189,1269,0189
0891
MICROMEGA
1189,0189
MITSUBISHI
1393
MYRAD
1189
NAKAMICHI
0097,1555
ONKYO
0842,1298,1320
1805
OPTIMUS
1023,0014,0121
0670
ORITRON
1497
PANASONIC
1308,1518,1288
1316,1548,1633
1763,1764,2967
PHILIPS
1189,1269,0189
0891,1266
PIONEER
1023,0014,0630
1384,1935
POLK AUDIO
0189,1414
RADIO SHACK
1609
RCA
REALISTIC
REVOX
SAMSUNG
SANGEAN
SANSUI
SHERWOOD
SIRIUS
SONY
1023,1609,1390
1609,0121
0189
1304,1500,1868
2165
1189,0189
1913
1602,1811
1058,1441,1258
1759,1622,1406
1558,1658,1758
1858
SOUNDESIGN
0670
STEREOPHONICS 1023
TEAC
1390
TECHNICS
1308,1518,1633
THORENS
1189
TOSHIBA
0842,1788
VENTURER
1390
WARDS
0189,0014
XM
1406,1414
YAMAHA
1023,0176,1176
1276,1331,1815
2061
AUDIO
AMPLIFIER Brand
ADCOM
BOSE
CARVER
CARY AUDIO
DESIGN
CLASSE
FLEXTRONICS
HALCRO
HARMAN/
KARDON
KRELL
LEFT COAST
LEXICON
MARANTZ
MARK LEVINSON
PARASOUND
PHILIPS
POLK AUDIO
PRIMARE
YAMAHA
CODES
0577,1100
0674
0892
1879
1461
1879
1934
0892
REMOTE CONTROL
PVR Brand
ABS
ALIENWARE
CYBERPOWER
DELL
DIRECTV
GATEWAY
GO VIDEO
HEWLETT
PACKARD
HOWARD
COMPUTERS
HP
HUGHES
NETWORK
SYSTEMS
HUMAX
HUSH
IBUYPOWER
LINKSYS
MEDIA CENTER
PC
MICROSOFT
MIND
NIVEUS MEDIA
NORTHGATE
PANASONIC
PHILIPS
PIONEER
RCA
AMPHION
0872
MEDIA WORKS
AMW
0872
APEX DIGITAL 0533,0672,1020
1056,1061
ARRGO
1023
ASPIRE
1168
DIGITAL
AUDIOVOX
0790
AWA
0730
B&K
0655,0662
BBK
1224
BEL CANTO
1571
DESIGN
BLUE PARADE 0571
BLUE SKY
0695
BROKSONIC
0695
CALIFORNIA
0490
AUDIO LABS
CELESTIAL
1020
CENTREX
0672
CINEA
0831
CINEVISION
0876,0833,0869
CITIZEN
1003,0695,1277
1587,2116
CLAIRTONE
0571
COBY
0778,0852,1077
1086,1107,1165
1177,1351
CRAIG
0831
CREATIVE
0503,0539
CURTIS
1087
MATHES
CYBERHOME 0816,0874,1023
1024,1129,1502
1537
CYTRON
0705
DAEWOO
0784,0705,0770
0833,0869,1169
1172,1234,1242
DANSAI
0770
DAYTEK
0872
DECCA
0770
DENON
0490,0634
DENVER
0778
DIGITREX
0672
DISNEY
0675,1270
DI VIDO
0705
DUAL
0675
DURABRAND 1127
DVD2000
0521
EMERSON
1003,2116
ENTERPRISE 0591,0675
ENTIVO
0503,0539
ENZER
0770
FISHER
1919
FUNAI
0675
GATEWAY
1073,1077,1158
GE
0522,0815
GO VIDEO
0573,0744,0715
0741,0783,0833
0869,1044,1075
1099,1144,1158
1304,1730
GOLDSTAR
0741,0869
GOODMANS
0790
GPX
0769
GRADIENTE
0490
GRUNDIG
0539,0705
HARMAN/
0582,0702
KARDON
HELLO KITTY 0831
HITACHI
0573,0664,1919
HITEKER
0672
INSIGNIA
2095
INTEGRA
0571,0627
IRT
0783
JBL
0702
JMB
0695
JSI
1423
JVC
0558,0623,0867
1164
JWIN
1049,1051
KAWASAKI
0790
KENWOOD
0490,0534
KLH
0790,1020,1149
KLOSS
0533
KONKA
0711,0721
KOSS
0769,1061,1423
LASONIC
0627
LECSON
1533
LENOXX
1127
LG
0591,0741,0869
1837
0892
1145,1802
0892
1483
1934
0892
0892
1395
0354
27
On-Screen Display
1.
Press MENU on the remote control to display the different
features on your Hitachi LCD TV.
2.
Use the CURSOR PAD (buttons, , ,
and ) and
highlight a different feature of the On-Screen Display
menu. Press the SELECT button to select.
3.
Press EXIT on the
exit from any menu.
remote
control
to
quickly
This part of the screen shows which
selections are available.
Video
Picture Mode
53
Brightness
45
Setup
Color
65
Channels
Tint
Sharpness
Multimedia
Move
NOTE
0
56
Medium
Color Temp.
SEL Select
Return
EXIT Exit
This part of the screen shows
which Remote Control buttons
to use.
The On Screen Display (OSD) for the different submenus shown in the following pages are for illustration purposes
only, there may be slight differences from the actual appearance of the OSD of your Hitachi LCD TV.
Video
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Color Temp.
Noise Reduction
MPEG NR
Gamma
Backlight
Auto Movie
Reel120 Motion
Aspect Ratio
Reset
28
Standard
Contrast
Audio
Select between 7 pictures modes; Dynamic, Standard, Movie, Custom, Game, Pro Day and Pro Night.
Adjust picture contrast.
Adjust picture brightness.
Adjust color.
Adjust tint.
Adjust sharpness.
Set this to High for less intense color with more blue, set to Medium for natural color and set to Standard for warm
colors.
Reduces conspicuous noise in the picture.
Reduces block noise in the picture.
Changes the gamma ratio value to produce pictures of greater contrast.
Adjust to increase or decrease the brightness of backlight.
Select the 3:2 Pull down detection feature Auto/Off. For a film like picture.
Adjust the movie motion to smooth or original.
Choose the picture format aspect ratio.
Choose to Reset Video Settings to factory settings.
On-Screen Display
Audio
Sound Mode
Bass
Treble
Balance
CONEQ
CONEQ 3D Sound
Audio Source
Preferred Language
Audio Language
Digital Output
Internal Speakers
Perfect Volume
Reset
Setup
Channels
Source
Signal Strength
New Channel Scan
Add Channels to List
Channel List
Channel Labels
Favorite Channels
Multimedia
JPEG Viewer
The Audio Language and Digital
Output of the Audio OSD are only
available for Digital channels.
Choose English, French or Spanish OSD Language.
Set Clock Settings.
Set Sleep Timer intervals (5 minutes ~ 4 hours).
Set Day/Night picture mode to start at preset times.
Set the password for the Parental control access and Calibration menu access.
Ratings system to block various types of programs.
Feature to turn On/Off closed captions.
Feature to display DIGITAL dialogue/text.
Feature to change the appearance of the DIGITAL CAPTIONS.
Feature to display ANALOG dialogue/text.
Select Power Consumption Savings options.
Set the brightness or turn Off the Power LED.
Feature to change the OSD Menu transparency.
Set to ON, this feature will enable simplified operation of compatible HDMI CEC components.
Label Video Inputs, VCR, DVD, etc.
Adjust the Phase and applies Reset to any adjustments made.
Adjust Horizontal Position, Vertical Position, Clock, Phase and Reset.
Resets all Audio, Video and Setup settings to the original condition.
NOTE
The Signal Strength feature of the
Channels OSD is only available for
Digital (DTV) channels.
Selects the type of signal to be used Cable or Air.
Access Signal Strength meter.
Set Auto Channel Scan.
Adds Channels to the List (Scanned channels remain the same until New Channel Scan is performed).
Set Channel List.
Set Labels on the channels.
Set the Favorite Channels.
ON-SCREEN DISPLAY
Menu Language
Time
Sleep Timer
Day/Night Timer
Set Password
Parental Controls
Closed Captions
Digital Captions
Digital Captions Options
Analog Captions
Energy Options
Light Control
Transparency
HDMI-CEC
Input Labels
Component Options
RGB Options
Reset AV & Setup
Selects 4 audio presets (Custom,Standard, Movie, News).
Adjust the intensity of low frequencies.
Adjust the intensity of high frequencies.
Adjust the balance.
Select sound equalizing mode.
Select CONEQ 3D Sound settings (On, Off).
Select between three Audio Sources (Stereo, Mono, SAP).
Select Language options if available (Available for digital channel).
Select Language options if available.
NOTE
Select Optical Output options.
Turn On/Off internal speakers.
Adjust volume to be closer in level between channels.
Resets all Audio settings the original condition
View digital still pictures from USB Drives.
NOTE
If there are any options grayed out, this is an
indicator that option is not available for that
specific function or mode.
NOTE
Changing any Video/Audio settings, other
than the Standard/Default settings, may not
meet ENERGY STAR 4.0 requirements.
29
Video
Select Video to adjust picture settings and improve picture quality.
You can independently customize each of the video inputs,
including Analog channels separately from Digital Channels (under
TV Mode). Adjustments will be applied to Custom settings.
Video
Picture Mode
53
Brightness
45
Setup
Color
65
Channels
Tint
Sharpness
Multimedia
Move
Video
56
Audio
Brightness
45
Color
65
Channels
Tint
Picture Mode
Multimedia
Standard
Contrast
53
Brightness
45
Color
65
Channels
Tint
Sharpness
Move
SEL Select
1.
2.
3.
Pro Mode
• For the PC input, there are only two Picture modes
available: Standard and Custom. In this case, only
Custom can be changed to your desired conditions.
• Video Setting can be set to the user’s preference
in Game mode (Similar to Custom mode) with the
exception of the Auto Movie setting.
• If you change any of the adjustments in the Dynamic,
Standard and Movie modes, the name of the
Custom option will change. For example, changes
on Dynamic will rename the option as “CustomDyn.”. This means that the original picture mode is
not affected by the changes; the only thing affected
is that Custom mode will take the video adjustments
of the mode where the change was made.
This Hitachi LCD TV includes a picture quality mode called “PRO
Mode” designed to customize the picture settings and is protected
by a password in order to keep your settings as you want it. This
option will give a couple extra picture modes (Pro-Day and ProNight) on your LCD TV for your viewing pleasure.
Please follow the next steps in order to adjust these special modes
on your LCD TV.
30
Brightness
45
Color
65
Channels
Tint
Multimedia
Move
3.
Use the CURSOR PAD
to select Picture Mode settings
(Dynamic, Standard, Movie, Custom, Game or PRO modes).
Then press the button to return to the Video menu or press
EXIT to quit menu.
There are seven Picture Modes available:
Dynamic,
Standard, Movie, Custom, Game, Pro-Day, and Pro-Night
Mode. Standard is the factory preset mode for your TV. The
only mode that can be directly changed by adjusting any Video
setting to your desired conditions is the Custom mode. The
other modes, with the exception of the Pro-Day and Pro-Night
(refer to Calibration Menu on page 30 for adjusting these
modes), are preset. Any changes made to these modes will
be applied to Custom mode.
NOTES
Standard
53
Setup
EXIT Exit
Use this function to choose from preset picture settings to optimize
your TV’s performance.
0
56
SEL Select
Calibration
Menu
Move
6.
7.
Return
EXIT Exit
The password used to access the Pro Mode feature
is the same password that is used to set and activate
parental controls. To change this password please
refer to the “Set the Password” Function on page 34.
Please Enter Access Code
Access Code
5.
Medium
Color Temp.
The code to enter the Pro Mode feature is a four digit access
code. The factory preset code is 0000. Use the NUMBER
buttons on the remote control to enter the access code. After
entering the correct access code, the Calibration Menu (green
OSD) should appear and the picture mode changes to PRO
Mode.
NOTE
4.
EXIT Exit
Contrast
Sharpness
Medium
Picture Mode
Return
Picture Mode
Audio
56
Return
Medium
Color Temp.
SEL Select
Video
0
Color Temp.
0
56
EXIT Exit
Setup
Multimedia
53
Setup
Move
Video
Standard
Contrast
Sharpness
Medium
Return
Picture Mode
Audio
0
Color Temp.
SEL Select
2.
Using the remote control, press the MENU button and select
the Video menu by pressing the SELECT or ► button.
Use the CURSOR PAD ▼ to highlight the Picture Mode option,
then press and hold the P.MODE button for 3 seconds, the
Access Screen should appear.
Standard
Contrast
Audio
1.
Input Mode
TV
Contrast
Pro-Day
Contrast
53
Brightness
45
Color
65
Tint
R1
Sharpness
56
SEL Select
Return
EXIT Exit
While in the Calibration menu, use the CURSOR PAD ▲, ▼ to
highlight the desired function to be adjusted.
Press the SELECT button or the CURSOR PAD ► to select
the function settings.
Press the CURSOR PAD ◄ or ► to adjust the function.
Press MENU to return to the Main menu or EXIT to quit the
Calibration menu.
Calibration Menu:
White Balance: Use this function to adjust the dark end (Cutoff)
and bright end (drive) of the White background.
NOTE
For Input Mode, CABLE and AIR share the same
Video adjustment settings. Also, each of the video
inputs have their own independent video adjustment settings.
Video
Other Video Menu Setting Adjustments
Use the CURSOR PAD
to be adjusted.
1.
2.
3.
4.
or
to highlight the function
Video
Audio
Press the SELECT button or the CURSOR PAD to select the
function settings.
Press the CURSOR PAD or to adjust the function.
Press MENU to return to main menu.
Press EXIT to quit menu.
MPEG NR
Off
Gamma
Backlight
Setup
Auto Movie
Channels
Reel120 Motion
Gamma 2
20
Auto
Mid
Aspect Ratio
Multimedia
Auto
Reset
Contrast
Use this function to change the overall light output to match the
viewing area. Increase for brighter rooms.
Move
SEL Select
Return
EXIT Exit
Brightness
Use this function to change the overall brightness of the dark areas
of the picture.
Color
Use this function to adjust the level of color in the picture.
1.
2.
Use the CURSOR PAD ,
to highlight Reel120 Motion
function.
Press the CURSOR PAD to select Off, Low, Mid, or High.
Tint
High: Use this setting for the maximum smooth motion effect.
Sharpness
Low: Use this setting for a mild smooth motion effect.
Use this function to adjust flesh tones so they appear natural.
Use this function to adjust the amount of fine detail in the picture.
Color Temp.
Set this to High for cooler color with more blue, set to Medium for a
more natural color or set to Standard for accurate color.
Noise Reduction
MPEG NR
The MPEG NR (Noise Reduction) function automatically reduces
block noise in the picture without degrading picture quality.
Gamma
The Gamma function allows you to set between three levels of
gamma ratio correction values (Gamma 1, Gamma 2, or Gamma
3) to produce pictures contrast.
Backlight
Adjust the brightness of the Backlight for maximum visibility. It
changes the intensity of the backlight. Increase for bright rooms
and decrease for darker rooms to make the dark areas of the
picture black.
Auto Movie
The Auto Movie function sets the 3:2 pull down detection feature to
Auto or Off. Theatrical movies are shot on film at 24 frames or still
pictures per second, instead of 30 frames or 60 fields like video.
When film is transferred to video for television viewing, the disparity
between the two frame rates must be reconciled. This involves a
process known as 3:2 pull down. When Auto Movie is set to Auto
your Hitachi LCD Television will activate the circuitry for this special
feature to improve video performance when watching interlaced
format film based sources. Set to OFF to deactivate this feature.
Off: Use this setting if there is noise with the High, Medium or
Low settings.
NOTE
Please note that the effect may not be immediately
noticeable and the effect depends on the content of
the movie.
Aspect Ratio
Use this function to select the Picture Format Aspect Ratio.
Video
Audio
MPEG NR
Off
Gamma
Backlight
Setup
Auto Movie
Channels
Reel120 Motion
Gamma 2
20
Auto
Mid
Aspect Ratio
Multimedia
Move
Auto
ON-SCREEN DISPLAY
The Noise Reduction function automatically reduces
conspicuous noise in the picture without degrading picture
quality. Set Noise Reduction to OFF if you see individual blocks
in the picture.
Mid: Use this setting for a moderate smooth motion effect.
Reset
SEL Select
Return
EXIT Exit
Auto Aspect
Automatically adjust the Aspect Ratio depending on the
input signal.
Aspect Modes
Manually select the Aspect Ratio. There are different aspect ratios
available according to the signal in use. See page 55.
Reel120 Motion
Hitachi’s advanced video processor can display movies at 120
frames per second. The following settings are available to smooth
the motion of movie sources. Please note that the effect may not
be immediately noticeable and the effect depends on the content
of the movie.
31
Video
Aspect Ratio reference
Input Signal
Display Screen
Display Aspect
Recomended
To display suitable screen as follows.
When Watching Standard Definition Pictures:
4:3
(4:3 Signal)
Displays 4:3 programs in there original aspect ratio with bars to
the left and right of the image.
16:9
Expands a 4:3 aspect ratio program to fill the widescreen 16:9 screen
Zoom1
Use this aspect mode to expand letterbox movies to fill the screen.
Note that some of the image may not be visible.
Zoom2
Use this aspect mode to fill the screen with very widescreen
movies. Note that some of the image may not be viewable in
this mode.
(Vista)
(Cinema)
When Watching High Definition Pictures:
16:9
(16:9 Signal)
Full
Plays a 16:9 image faithfully showing 95% of the size.
Use this mode when you want to see 100% of the signal.
Note that some signals have noise. In the case of noise use the 16:9
mode.
Reset
This function allows you to reset the Video Menu Settings of the
present input source and return it to the Standard video mode
Video
Audio
MPEG NR
Off
Gamma
Backlight
Setup
Auto Movie
Channels
Reel120 Motion
Gamma 2
20
Auto
Mid
Aspect Ratio
Multimedia
Move
1.
2.
3.
Auto
Reset
SEL Select
Return
EXIT Exit
Use the CURSOR PAD , to highlight this function.
Press the SELECT button or CURSOR PAD
to select
Yes or No.
Press the SELECT button on the Yes option to execute the
reset of the Video settings.
Depending upon the video program being viewed, you can
customize each video input to your preference to increase viewing
performance and pleasure.
If you run this Reset menu, only the present input source will reset
to its initial condition. For example, if the Reset menu has been
selected and done for HDMI 1 input source, only the HDMI 1
settings will return to its factory default.
32
Audio
Select Audio to adjust the sound to your preference.
Video
Sound Mode
Audio
Standard
Bass
32
Treble
48
Setup
Balance
Channels
CONEQ
Table Top
On
Stereo
Audio Source
Some programs transmit in other languages. This language
function will allow you to set between 3 language options (English,
Español, and Français) to your preference as the audio default
language.
Audio Language
0
CONEQ 3D Sound
Multimedia
Preferred Language
Some programs transmit more than one DTV language option. Most
will have English as a default language. The language function will
allow you to select up to 6 language options (if available). Please
try all available options.
Digital Output
Move
SEL Select
Return
EXIT Exit
Sound Mode
This function has four sound modes that are preset according
to the type of program. Standard is for normal audio conditions,
Movie audio settings is for movies, News audio settings is for
News programs, and Custom mode is for adjusting audio levels
to your preference. The only mode that can be directly changed
by adjusting any audio setting to your desired conditions is the
Custom mode. The other modes are preset and any changes
made to these modes will be applied to Custom mode.
Audio Menu Settings Adjustment
This function allows you to select between RAW and PCM.
This setting changes the format of the Digital Optical Output.
PCM- Select this feature if the TV is connected to an amplifier/receiver
with a PCM only decoder; it will provide two independent soundtrack
channels through the optical audio output jack (Digital Audio).
RAW- Select this feature to allow the original audio bit stream to
be passed through to the audio receiver.
Internal Speakers
This function is useful when using external speakers. Select ON if
using the internal speakers only. Select OFF if you prefer to use the
speakers from a separate stereo system.
Perfect Volume
Press the CURSOR PAD
or
to select menu item.
This function will automatically adjust volume so each channel and
input has the same average volume level.
2.
Press the CURSOR PAD
or
to adjust the function.
Reset
3.
Press EXIT to quit the MENU, or select AUDIO to return to the
main menu.
NOTE
This function allows you to reset the Audio Menu Settings of the
present input source and return it to the Standard mode and default
settings.
If Treble is selected you are adjusting treble.
The additional menu items Bass and Balance can be
selected and adjusted in the same manner.
Video
CONEQ 3D Sound
On
Audio Source
Stereo
Bass
Audio
This function controls the low frequency audio to the speakers.
Setup
Digital Output
Treble
Channels
Internal Speakers
On
Perfect Volume
Off
This function controls the high frequency audio to the speakers.
Multimedia
Balance
This function will control the left to right balance of the LCD TV
internal speakers and headphone jack.
CONEQ
Delivers clear crisp sound and high fidelity music playback.
Use CURSOR
to select the preferred setting.
Table Top: Use this setting for improved sound quality with
table top stands.
Wall Mount: Select this setting for improved sound quality
when wall mounting.
Hearing Aid: This special mode is for users that want to
maintain clear sound after removing their conventional hearing
aid. Note that this feature emphasizes higher frequencies.
CONEQ 3D Sound
Produces a natural, three-dimensional sound image through the
TV’s sound system.
Move
1.
2.
3.
Audio Language
PCM
Reset
SEL Select
Return
ON-SCREEN DISPLAY
1.
EXIT Exit
Use the CURSOR PAD , to highlight functions.
Press the SELECT button or the CURSOR PAD to select
Yes or No.
Press the SELECT button on the Yes option to execute the
reset of the Audio settings.
Depending upon the audio program being heard, you can
customize each audio input to your preference to increase audio
performance and pleasure.
If you run this Reset menu, only the present input source will reset
to its initial condition. For example, if the Reset menu has been
selected and done for HDMI 1 input source, only the HDMI 1
settings will return to its factory default.
Audio Source
Multi-Channel Television Sound will allow you to sele
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement