Assembly and operating instructions - Sport

Assembly and operating instructions - Sport
Assembly and operating instructions
Art. No. TF-RX7-2
Rowing machine RX7
2
RX7
Dear Customer,
Thank you for deciding for a high-quality training equipment of the brand Taurus,
the brand that makes athlete‘s hearts beat faster. Taurus offers a wide range of home
fitness equipment like elliptical cross trainers, ergometers, treadmills and rowing
machines. Taurus equipment is the optimal equipment for all those who want to train
at home independent of goals and fitness level. For further information please visit
www.sport-tiedje.com or www.taurus-fitness.de.
SAFETY NOTICE
Please read all of the instructions carefully before assembly
and first use. These instructions are intended to ensure
speedy assembly and explain safe usage. Make sure that all
people exercising with the equipment (in particular children
and persons with limited physical, sensory, mental or motor
capabilities) are informed about these instructions and its content in advance.
In case of doubt, a responsible person must supervise the use of the equipment.
This equipment has been manufactured according to the latest safety knowledge. As
far as possible, potential safety hazards which could cause injury have been eliminated.
Make sure to follow the instructions carefully and that all parts are securely in place. If
required, read through the instructions again to correct any mistakes.
Please pay close attention to the safety and maintenance instructions given here.
The contract partner cannot be held liable for damage to health, accidents or
damage to the equipment when it is not used in accordance with these instructions.
The equipment is suitable for home use as well as semi-professional use (e. g.,
hospitals, clubs, hotels, schools, etc.). It is not suitable for commercial or professional
use (e. g., commercial gyms).
Retain these instructions in a safe place for future reference, maintenance or when
ordering replacement parts.
3
CONTENTS
1
GENERAL INFORMATION6
1.1 Technical data6
1.2 Personal safety7
1.3 Electrical safety8
1.4 Set-up place8
2
ASSEMBLY INSTRUCTIONS, MAINTENANCE AND CARE
9
2.1 General instructions9
2.2 Faults and troubleshooting11
2.3 Maintenance and service calendar
12
3
ASSEMBLY13
3.1 Package contents13
3.2 Assembly instructions14
3.3 Settings / setting up the rowing machine
18
4 OPERATING INSTRUCTIONS24
4.1 Console display24
4.2 Button functions26
4.3 Programs27
4.3.1 Speed or Pace boat program
28
4.3.2 Race Program29
4.3.3 Interval distance and interval time programs
31
4.3.4 60%, 75%, 90 % heart rate program
33
4.3.5 Target heart rate program (THR Program)
34
4.3.6 Watt program35
4.3.7 Profile program37
4.3.8 Fitness Test39
4.3.9 Game39
4.3.10 User settings40
4.4 Operation infrared remote control
48
4.4.1 Introduction48
4.4.2 Inserting batteries48
4.4.3 List of parts49
4.4.4 Main functions of the infrared transmitter
49
4.4.5 Replacing batteries50
4.4.6 Infrared range and direction 51
4
RX7
4.4.7 Angle of the infrared transmitter 52
4.4.8 Code from the remote control
52
4.4.9 Troubleshooting manual 53
5
WORKOUT INSTRUCTIONS55
5.1 Heart rate measuring 55
5.2 Notes for correct rowing57
5.3 10 tips for effective rowing training
60
5.4 Designing a workout61
5.5 Stretching exercises for leg & chest muscles
63
5.6 Workout journal 65
6 WARRANTY INFORMATION66
7DISPOSAL
68
8 ORDERING ACCESSORIES69
9
ORDERING SPARE PARTS70
9.1 Service hotline70
9.2 Serial number and model name
70
9.3 Part list and exploded drawing - rowing machine
71
9.4 Part list and exploded drawing - infrared remote control
74
5
1 GENERAL INFORMATION
1.1 Technical data
LCD display of
+ strokes, strokes per minute
+ training time in min
+ distance in m
+ time/500 m: average / current
+ calories burnt in kcal
+ heart rate (when using a chest strap)
+ Watt
+ resistance level
Resistance system:
Resistance level: Watt:
combined air/magnet brake system
24
30 - 300 Watt
User memory:
5
Total number of training programs: 40
Pacer program:
1
Pre-set programs:
25
Watt-controlled programs:
1
Heart rate controlled programs:
4
User defined programs:
5
Weight and dimensions:
Article weight (gross, including packaging):52 kg
Article weight (net, without packaging): 50.45 kg
Packaging dimensions (L x W x H): approx. 1480 mm x 800 mm x 310 mm
Set-up dimensions (L x W x H): approx. 2430 mm x 560 mm x 1100 mm
Set-up folded (L x W x H): approximately 1300 mm x 600 mm x 1700 mm maximum
User weight: 150 kg/330 lbs
6
RX7
1.2 Personal safety
+ Before you start using the equipment, you should consult your physician that this
type of exercise is suitable for you from a health perspective. Particularly affected
are persons who: have a hereditary disposition to high blood pressure or heart
disease, are over the age of 45, smoke, have high cholesterol values, are overweight
and/or have not exercised regularly in the past year.
+ Please note that working out excessively can seriously damage your health. Please
also be aware that heart rate monitoring systems might be imprecise.
+ The equipment may only be used for its intended purpose; that means for whole
body training by adults.
+ Any other usage is prohibited and potentially dangerous. The contract partner
cannot be held liable for damage resulting from improper use.
+ The equipment is strictly for use by one person at a time.
+ Children should not be allowed unsupervised access to the equipment.
+ Before starting your training, make yourself familiar with all of the equipment‘s
functions and setting options. Have an expert explain the correct usage of the
product to you.
+ Make sure that nobody is in the range of motion of the equipment while exercising.
+ Keep your hands, feet and other body parts, hair, clothing, jewelry and other
objects well clear of moving parts.
+ During use, wear suitable sports clothing rather than loose or baggy clothing.
When selecting sports shoes, think about the suitability of the sole – preferably
this should be made of rubber or other non-slip materials. Shoes with heels,
leather soles, studs or spikes are not suitable. Never work out in bare feet.
+ It is also important to take note of the information given in the workout instructions
for creating a workout plan.
+ At the first signs of weakness, nausea, dizziness, pain, difficulty in breathing or
other abnormal symptoms, stop your workout immediately and, if necessary,
consult your physician.
+ Without prior agreement from your authorized contract partner, opening the
equipment is prohibited.
+ Be careful when you get on or off the equipment.
7
1.3 Electrical safety
+ The equipment requires a 220 - 230V / 50 Hertz mains power supply.
+ The equipment should be connected directly to a grounded plug socket only by
means of the power cable supplied. The use of multi-socket adapters or similar
is not recommended. Extension leads must comply with local electrical safety
guidelines. Always fully unwind the power cable.
+ The outlet should be secured with a fuse with a minimum value of „16 amperes,
slow“.
+ In order to reduce the risk of an electric shock, always unplug the equipment from
the mains socket immediately after your workout, before assembly or dismantling,
and before maintenance or cleaning. Do not pull on the cable.
+ When plugged in, do not leave the equipment unattended at any time. To avoid
use by anyone unfamiliar with the operating instructions, the power cable should
be removed when the equipment is not in use.
+ Keep the power cable away from heat, oil and sharp edges. Do not route the power
cable underneath the equipment or under a carpet or rug, and do not place any
objects on top of it.
+ Make no modifications to either the power cable or the mains plug.
+ If the power cable or the plug are damaged or defective, contact your authorized
contract partner. Do not use the equipment in the meantime.
+ Do not keep electrical devices (e. g., mobile phones) in close proximity to the
console or the control electronics, otherwise display values (e. g., pulse measuring)
could be inaccurate.
1.4 Set-up place
+ The equipment should only be used indoors, in a sufficiently heated and dry area
(ambient temperature between 10°C and 35°C). The equipment should not be
used outdoors or in rooms with high humidity (over 70%) like swimming pools. The
equipment should only be stored in surroundings with an ambient temperature
between 5°C and 45°C.
+ The training room should be well ventilated during training and not be exposed to
any draughts.
+ Always keep the power cable away from hot surfaces and grounds and make sure
that the cable is not stuck somewhere or becomes a „trip hazard“.
+ No objects of any type should be inserted into the openings of the equipment.
+ The equipment should be placed on a level and solid surface, any unevenness in
the floor should be leveled out.
8
RX7
+ A floor protective mat / equipment underlay can help to protect high-quality floor
coverings (parquet, laminate, cork, carpets) from dents and sweat and can help to
level out slight unevenness.
+ Choose a location in which to place the equipment such that there is enough free
space/clearance to the front, the rear and to the sides of the equipment. Make
sure that you leave at least 30 cm on each side of the equipment and at least 15
cm in front of and behind the equipment as a training zone. This is the minimum
required area in order to safely use the equipment.
The recommended free zone around the equipment should be at least 60 cm on
each side and 45 cm in front of and behind the equipment.
Furthermore, the equipment should not be set up in main entrances or on escape
routes.
2 ASSEMBLY INSTRUCTIONS, MAINTENANCE AND CARE
2.1 General instructions
+ Please check if all parts and tools belonging to the equipment are included in the
delivery and if there is any transport damage. If there are any complaints, please
contact your contract partner directly.
+ Some of the nuts and bolts to be used in assembly are already pre-mounted in
order to make set-up as easy as possible.
+ The equipment must be assembled by adults. In case of doubt, ask for assistance
from another person with technical skills.
+ Keep children away from the equipment during assembly, because small parts are
included in the delivery and may be swallowed.
+ Make sure that you have enough space (at least 1.50 m) in every direction during
assembly.
9
+ Do not leave any tools and packaging materials like plastic sheeting laying around
to avoid danger of suffocation for children.
+ Assemble the equipment on an underlay mat or on the cardboard packaging in
order to avoid damage to the equipment and to the floor (scratches).
+ Before starting assembly, all individual parts should be placed on the floor next to
each other.
+ Read the assembly instructions carefully and assemble the equipment according
to the illustrations. Proceed carefully and cautiously.
+ First loosen all parts and check for their correct fitting. Then tighten the screws
using a tool.
+ Modifications to the design or improper repairs may pose a hazard to the user and
should not be carried out. The product warranty may be void as a result.
+ Only authorized service technicians are permitted to carry out all servicing and/or
repairs – it excludes maintenance and care.
+ Damaged or worn components may impair your safety and the lifespan of
the equipment. You should therefore immediately replace damaged or worn
components. Please contact your contract partner in such a case. The equipment
should no longer be used until it has been repaired. When needed, only use
original Taurus spare parts.
+ Check the tightness of all screw connections once a month.
+ In order to be able to guarantee the constructively defined safety level of this
equipment, we recommend having the equipment regularly maintained (at least
once a year) by specialists (service technicians of your contract partner).
+ The equipment may be cleaned of dust, dirt and sweat using a damp cloth. The
use of solvents should be strictly avoided. Also, make sure that no liquids (e. g.
sweat) get into the openings of the equipment (e. g. console).
+ It is recommended to have a safety check before each training session and to examine
the equipment for wear or damage. If you determine damaged or defective parts,
the equipment should not be used until it is repaired. Please contact the contract
partner for the repair.
+ Manufacturer note: The pull strap is equipped with a return spring so that the
pull strap is automatically wound up again. The return spring is equipped with the
lowest possible power. The reason for the light return spring is to give the user a
better training effect for the rear thigh muscles. These muscles are stressed when
the user moves the seat forward. If the return power is strong, the person using the
equipment would be pulled.
10
RX7
2.2 Faults and troubleshooting
PROBLEM “NO PULSE” / heart rate detected
SOLUTION
1) If your skin is too dry, your chest strap cannot detect the electrical impulse from
your heart rate. Moisten the sensors of the chest strap slightly in order to improve the
contact. For longer units, like a marathon, we recommend using contact gel for the
chest strap.
2) Make sure that you use a compatible analog chest strap with a frequency of 5 kHz.
3) Change the batteries in your chest strap even if the chest strap is new.
4) If you are using a 5 kHz frequency chest strap, there may be interfering signals.
Move your rowing machine to another place and, if applicable, remove all electrical
devices out of the surrounding area. Then check the heart rate signal again.
5) Check if your chest strap is working correctly. Test it on a different equipment (on
site by the contract partner, local health club, etc.).
6) Contact your contract partner in order to confirm the compatibility of your chest
strap.
PROBLEM LCD blurs - divided LCD - software error, etc.
SOLUTION
1) Computer reset: Press the RESET button for a few seconds.
2) Restart the computer: Disrupt the power supply for about 15 seconds.
3) Reconnect all cable plug connections, see assembly instructions.
3) Ask for replacement console and install it.
FAQ – FREQUENTLY ASKED QUESTIONS
Q: Chest strap - does my old chest strap work with the rowing machine?
A1: 5 kHz chest strap = mostly - provided that your computer is 5 kHz compatible. A2:
Digital chest strap (2.4 GHz) = no - digital chest straps are coded and normally only
compatible with one equipment.
Q: How does the computer determine and calculate the distance (e. g. meters) and
speed (e. g. time/500m)?
A: Distance - This rowing machine has two sensors on the pull strap, Sensor A and
Sensor B. Thus, the computer can determine if the strap moves backwards (stroke
pull) or forwards (release of a stroke). The computer measures the rotations per stroke,
combined with a factor for the resistance level, a higher resistance results in more
meters. The speed is calculated from this combined with the time factor.
11
2.3 Maintenance and service calendar
The following routine work must be executed in the specified time intervals:
Part
Display console
Weekly
Monthly
C
I
Lubrication of mobile parts
Plastic cover
Screws & cable connections
2x annually
I
C
I
I
Legends: C = cleaning; I = inspect
Pull strap [part 709]
The pull strap [709] is made of high-quality nylon fabric and extremely resilient. It is
nearly impossible to tear the pull strap. Nevertheless, it is important to inspect it for
wear. Make sure that there are no cuts or frays or other types of damage. Also check
the seam on the handle. If you determine any impairments, you should no longer use
the rowing machine until you have replaced the pull strap.
Footrest
[Partl#014, 126, 127, 128, 300, 306, 710]
The footrest has many mobile parts and it is important that they are always in a good
state. Check if the buckle and the foot loop are connected with each other. Check to
see if the locking mechanism from the footrest [126] works properly as well.
Make sure that all screws are tight. If you determine any errors, contact your contract
partner immediately and use the rowing machine again only after it has been repaired.
12
RX7
3ASSEMBLY
3.1 Package contents
The package contains the parts represented in the illustration, including a power
cable with mains plug. If one of the illustrated parts is missing, please contact your
contract partner.
13
3.2 Assembly manual
Before starting assembly, look carefully through the individual assembly steps shown
and assemble the equipment in the order indicated.
Step 1:
Before you unpack the RX7 rowing machine, make sure that you have a work space
of 2m x 2.5 m.
Step 2:
Open the box as shown in the
figure below.
NOTE: In order to protect the RX7
rowing machine from damage as
long as possible, you should only
remove the protective packaging
when it is necessary.
Step 3:
a) Place the frame [002] in the
carton lid as shown in the image on
the right.
b) Loosen the four pre-mounted
screws [300] from the frame [002].
c) Mount the front supporting foot
[005] as in the illustration with the
previously loosened screws [300]
and tighten them..
14
RX7
Step 4:
a) For the next step, turn the frame as shown in the figure.
b) Remove the safety belt and dispose of it. Place the handle in the appropriate holder.
c) Loosen the four pre-mounted screws (300) from the frame (002) with the included
tool.
d) Mount the two foot
supports [013 & 014]
with the previously
loosened four screws
[300] and tighten them.
Step 5:
a) Remove the rail [001] from the carton and place it on the carton lid as in the figure
below.
b) Loosen the four screws [300] from the rail [001] and the two screws [302] from the
rear supporting foot [006] with the included tool.
c) Mount the rear supporting foot
[006] with the previously loosened
four screws [300] and tighten them.
d) Mount the cover cap for the rail
[116] with the two screws [302] and
tighten them.
e) Remove the binding wire.
15
Step 6:
a) Loosen the screws [300] eight times from the rotating joint [300] tool.
b) Mount the rail [001] with the
previously loosened screws [300] and
tighten them.
Step 7:
a) Loosen the four screws (300) from the seat (119) with the included tool.
b) Mount the seat [119] with the
previously loosened four screws
[300] and tighten them.
16
RX7
Step 8:
a) Loosen the four screws (303) from the seat frame with the included tool.
b) Mount the two seat frame covers [117] with the previously loosened four screws
[303] and tighten them.
Note: Make sure that the two seat frame covers [117] are correctly connected with
each other as in the figure below.
Step 9:
a) Connect the power supply [715] to
the outlet.
17
3.3 Settings / setting up the rowing machine
Opening up
Important: Clear an area of 1 x 2.5 meters before you begin setting up the rowing
machine. Make sure that the floor is solid and level.
Two people are needed to open up the RX7 rowing machine. One person holds the
rail [001], while the other presses the mounting button [125].
1) Turn the mounting button [125] five to seven times counterclockwise.
2) While the first person holds the rail [001], the second person pulls out the mounting
button [125] in order to release the safety mechanism and open up the rail.
3) Then tighten the mounting button [125] in a clockwise direction.
NOTE: While opening and closing the rowing machine, keep your fingers and
hands away from rotating joints in order to avoid injury.
18
RX7
Sit up securely
Make sure that the seat [119] is directly below you before you sit down.
1) Straddle the rail [001].
2) Position the seat [119] directly below you.
3) When sitting down, make sure that the seat does not move.
Presetting of the heel support
There are 10 marked settings for the heel support. Before you begin training, set the
heel support [126] to the first setting.
1) Press the two levers from the heel support together in order to open the locking
mechanism.
2) Slide the heel supports [126] to the first setting.
3) Release the lever in order to enable the locking mechanism.
19
Setting of the foot straps
The correct position of the foot straps [710] is located directly behind the toes, approximately above the joints. Make sure that the foot straps [710] are tightened.
1) Slide your feet with the heel support [126] to the first setting under the foot strap
[710].
2) The correct position for the foot straps [710] is located directly behind the toes,
approximately above the joints.
3) Tighten the foot loops [710] as in the illustration above.
Setting the heel support
The heel support [126] has a spring-loaded locking system for simple setting. Simply
slide the heel support up to the heel.
Remember the setting for the next training.
1) Use your foot under the tightened foot strap to simply slide the heel support [126]
up to your heel as in the image above.
2) Remember the setting for the next training.
20
RX7
Setting the console
The console [714] and the console mast [015] can be set to nearly any height and any
angle. Note: Due to safety reasons, you should avoid having the pull strap [709] touch
the console [714] during training.
1) Hold the console [714] with both hands as in the image above.
2) Move the console [714] to the desired height and set the desired angle.
Setting the fan
The RX7 rowing machine creates an air flow, which can be aimed toward a certain direction through the air slits.
1) Turn the setting wheel for the air slits in order to change the air direction.
2) In order to stop the air flow, turn the wheel all the way down.
21
Handle holder
Once you have completed your training, remember to hook the handle into the holder
[108].
Folding up
If you would like to fold up the rowing machine, follow the steps for opening the rowing machine in reverse order.
NOTE: While opening and closing the rowing machine, keep your fingers and
hands away from rotating joints in order to avoid injury.
1) Turn the mounting button five to seven times counterclockwise.
2) While the first person holds the rail [001], the second person pulls out the mounting
button [125] in order to release the safety mechanism and fold up the rail.
3) Then tighten the mounting button [125] in a clockwise direction.
22
RX7
Loosen the foot strap
You can very easily open the foot strap with the quick release flap.
1) Lift the flap with your thumbs as in the image above.
Transport and storage
he Taurus RX7 rowing machine is equipped with transport wheels, which makes it very
easy to move by one person. However, the Taurus RX7 rowing machine weighs 44 kg,
which may make the help of a second person necessary.
1) Stand next to the rowing machine as in figure 1. Hold it tight with both hands. With
the help of your body weight, slowly tilt the RX7 forward while you simultaneously
move to the front side.
2) After this, you can easily move the rowing machine to a new position.
The rowing machine is equipped with soft PVC wheels in order to protect your carpet
or flooring.
3) If you would like to fold up the rowing machine, follow the previously described
steps in reverse order.
23
4 OPERATING MANUAL
4.1 Console display
24
METERS
Covered distance is displayed in meters.
BAR CHART
Program profiles and text messages are shown here.
16 rows high = 24 resistance levels
20 columns long = 20 time intervals
SPM
Strokes per minute
RUDERSCHLAG
Total strokes
CALORIES
Calorie consumption/energy turnover in kilo calories (Kcal)
NOTE: Your user data serves for a better calculation of the
calorie turnover. You can select it in the main menu.
RX7
WATTS
Estimated Watt per stroke, calibrated according to EN
957. 1 Watt corresponds to an output of 1 Joule per
second.
HEART RATE RECEIVER
FREQUENCY
Depending on model 5 kHz or 2.5 GHz or both
PULSE
Your heart rate is specified in strokes per minute.
NOTE: “---” indicates that the computer is not receiving
a heart rate/pulse signal.
LEVEL
24 resistance levels are available to choose from
level 1 = minimum resistance
level 24 = maximum resistance
TIME/500m CURRENT
Only indicates the current time/500 m.
TIME/500m AVERAGE
Only indicates the average time/500m.
TIME
Indicates the training time in minutes and seconds.
BATTERY
Full, half full or empty
NOTE: - Only applies for A/C operated computers
- Battery operation & battery type
Text messages support you and guide you through
each computer program.
RUNNING TEXT
25
4.2 Button functions
MENU
A button shortcut for the main menu.
NOTE: Does not work in the workout mode, works in the menu mode
and pause mode.
RECOVERY
1. Kilometer counter: Hold the RECOVERY button.
Two functions
2. Start RECOVERY program: The recovery program automatically
evaluates your heart rate recovery for a minute directly after training.
SELECT
1. Before the workout (e. g. menu mode): Press the SELECT buttons in
order to scroll through the available selection.
2. Before the workout (e. g. menu mode): Hold one of the SELECT buttons in order to accelerate the selection.
Four functions
3. During the workout (e. g. workout mode): Press one of the SELECT
buttons to set the resistance level.
ENTER
Two functions
START/STOP/
RESET button
Three functions
26
4. Before the workout (e. g. menu mode): Hold both SELECT buttons for
three seconds in order to get to the measuring system (metric or Imperial). Only applies to the user data for size and weight.
1. Before the workout (e. g. menu mode): Press the ENTER button in
order to confirm a selection.
2. Before the workout (e. g. menu mode): Hold the ENTER button for
three seconds in order to skip the selection process.
NOTE: The ENTER button does not work in the workout mode.
1. Before the workout (e. g. menu mode): Press the START button to
begin the workout.
2. During the workout (e. g. workout mode): Press the STOP button to
complete the workout. The computer will automatically go to the “End
of Workout Display”
3. Any time / any mode: Hold the RESET button for three seconds in
order to return the computer to the main menu. NOTE: Unsaved data
will be lost. Any saved data will be maintained.
RX7
4.3 Operation
Programs
This computer has the following programs:
1 PACE BOAT PROGRAM (speed specification)
1 RACING PROGRAM
2 INTERVAL PROGRAMS ~ INTERVAL DISTANCE and INTERVAL TIME
4 HEART RATE CONTROLLED PROGRAMS 60%, 75%, 90% and target heart rate
1 WATT PROGRAM
5 USER PROFILE PROGRAM a user saved on the computer memory
25 PROFILE PROGRAMS that contain unlimited RANDOM PROFILES
1 FITNESS TEST
1 GAME
1 RECOVERY PROGRAM
40 (+2) PROGRAMS total
Start rowing JUST START ROWING
Simple begin rowing. The computer will go on automatically and starts the Pace boat
program with a default of 2:15 min / 500 m.
START
Enter your user data so that the computer can calculate the following:
BMI = Body Mass Index
BMR = Basal Metabolic Rate
TDEE = Daily calorie intake
Your user data allows the computer to calculate your calorie consumption in a more
precise manner. Enter your user data under the USER DATA point in the main menu.
Main menu
The main menu has 12 options:
1. Pace boat program (speed default)
2. Race Program
3. Interval: distance and time interval
4. Heart rate: four programs 60%, 75% or 90% of the maximum heart rate and target
heart rate
5. Watt program
6. Profile: five user profiles + 25 saved programs
27
7. Fitness Test
8. Game
9. User data: Setting user data
10. User profile
11. Delete users
12. Manual
The computer automatically starts in the main menu. Simply press the MENU button if
you would like to return to the main menu.
4.3.1 Speed or Pace boat program
The Pace boat program allows you to row next to a race boat in order to accelerate your
workout.
There are two possibilities to program the race boat time:
(1.) Set time/500m (pace)
(2.) Set time and meters
1) Speed program
Press the SELECT button in the main menu and select the Pace boat program. Then
confirm with ENTER.
NOTE: Press the MENU button to return to the main menu.
2) SELECT USER
Press the SELECT button and select GUEST USER or one of the five possible users (e. g.
USER 1 or USER 2, etc.). Then confirm with ENTER.
3a) TIME/500M
Press SELECT and select TIME/500M or go to step 3b. Then confirm with ENTER.
3b) TIME and METER
Press ENTER to skip the TIME/500M selection. Press SELECT and select a TIME.
Then confirm with ENTER. Press SELECT and select METER.
Then confirm with ENTER.
NOTE: Press START to immediately begin your workout.
4) RESISTANCE LEVELS
Press SELECT and select a resistance level.
Then confirm with ENTER.
28
RX7
5) TARGET VALUES
Target values are optional.
Hold ENTER in order to skip all target value settings.
Press ENTER shortly in order to skip the individual target values. Press the SELECT
buttons to select a target value. Then confirm with ENTER.
6) ALARM
With the alarm, you can define the upper and lower limits for your training.
Press START in order to skip every alarm.
Press ENTER in order to skip an individual minimum and/or maximum alarm. Then
confirm with ENTER.
This function is optional.
7) START ROWING
If you get to the end of the selection process, the display will show:
START ROWING. Now you can either start to row or press ENTER to enter target values
and alarms.
NOTE: During your workout, you can adjust the resistance levels with the SELECT
buttons.
4.3.2 Race Program
The RACE program allows you to drive against the average time/500 m of a random
user (USERS AVERAGE TIME/500M). Row as a father against a son, mother against a
daughter, etc. Be the best of your family.
1) RACE PROGRAM
Hold the SELECT button in the main menu in order to scroll to the race program and to
select it. Then confirm with ENTER.
NOTE: Press the MENU button to return to the main menu.
2) SELECT USER
Hold the SELECT button and scroll to the sub-point GUEST USER or to one of five
possible preset users. Then confirm with ENTER.
3) OPPONENT USER
Hold the SELECT button to scroll to the user against whom you would like to row and
select them. Then confirm with ENTER.
Press the START button in order to immediately begin training.
29
4) RESISTANCE LEVEL
In the main menu, hold the SELECT button to scroll and to select the resistance level.
Then confirm with ENTER.
5) TARGET VALUES
Target values are optional. Hold ENTER in order to skip all target value settings.
Press ENTER shortly in order to skip the individual target values. Press the SELECT
buttons to select a target value. Then confirm with ENTER.
6) ALARM
With the alarm, you can define the upper and lower limits for your training.
Press START in order to skip every alarm.
Press ENTER in order to skip an individual minimum and/or maximum alarm. Then
confirm with ENTER.
This function is optional.
7) START ROWING
If you get to the end of the selection process, the display will show:
START ROWING. Now you can either start to row or press ENTER to enter target values
and alarms.
NOTE: You can set the resistance levels during your workout with the help of the
SELECT buttons.
30
RX7
4.3.3 Interval distance and interval time programs
With these interval programs, intense training phases alternate with short recovery
phases. It is scientifically proven that interval training burns more calories than cardio
training with consistent intensity. You have the possibility to choose between two
interval methods:
Interval distance program = stress distance in meters + individually definable recovery
phase in seconds
Interval time program = stress time in seconds + individually definable recovery phase
1) INTERVAL PROGRAM
Press the SELECT buttons in the main menu and select the interval program. Then
confirm with ENTER.
NOTE: Press the MENU button in order to return to the main menu.
2a) INTERVAL DISTANCE PROGRAM
Press the SELECT buttons and select INTERVAL DISTANCE. Then confirm with ENTER.
2b) INTERVAL TIME PROGRAM
Press the SELECT buttons and select INTERVAL TIME. Then confirm with ENTER.
3) SELECT USER
Press the SELECT buttons and select the GUEST USER or one of the five available users.
Then confirm with ENTER.
4) NUMBER OF INTERVALS
Press the SELECT buttons and choose the number of intervals/stress phases. Then
confirm with ENTER.
5a) INTERVAL DISTANCE PROGRAM
Press the SELECT buttons and select the stress distance in meters. Then confirm with
ENTER.
5b) INTERVAL TIME PROGRAM
Press the SELECT buttons and select the interval time in seconds. Then confirm with
ENTER.
31
6) REST TIME
Press the SELECT buttons and select REST TIME. Then confirm with ENTER.
NOTE: You can immediately begin to train with the START button.
7) RESISTANCE LEVEL
In the main menu, hold the SELECT button to scroll and to select the resistance level.
Then confirm with ENTER.
8) TARGET VALUES
Target values are optional. Hold ENTER in order to skip all target value entries.
Press ENTER shortly in order to skip the individual target values. Press the SELECT
buttons to select a target value. Then confirm with ENTER.
9) ALARM
With the alarm, you can define the upper and lower limits for your training.
Press START in order to skip every alarm.
Press ENTER in order to skip an individual minimum and/or maximum alarm. Then
confirm with ENTER.
This function is optional.
10) START ROWING
If you get to the end of the selection process, the display will show: START ROWING.
Now you can either start to row or press ENTER to enter target values and alarms.
NOTE: You can set the resistance levels during your workout with the help of the
SELECT buttons.
32
RX7
4.3.4 60%, 75%, 90 % heart rate program
The heart rate program allows you to control the load through your heart rate. The
rowing machine resistance here is set automatically so that you always train with
your selected heart rate. Every 30 seconds, the computer compares your pulse with
the selection and adjusts the resistance correspondingly. The percentage numbers
indicate the value % of the maximum heart rate. The rule of thumb for the calculation
of the maximum heart rate is:
HRmax = 220 - age
This program requires a pulse signal from a compatible chest strap.
These three % heart rate programs work with the data from the selected user in order
to better calculate your performance data. Thus, enter a user when possible.
NOTE: During your workout, you cannot adjust % HR or the resistance levels.
In order to determine the optimal training pulse for your goals, continue to read Chapter
5.1 of these instructions. However, we recommend initially starting your training at an
easy level. Begin training at 60 % and increase it with your progress.
1) HEART RATE PROGRAM
Press the SELECT buttons and select HEART RATE. Then confirm with ENTER.
NOTE: By pressing the MENU button, you can return to the main menu.
2) % HEART RATE PROGRAM
Press the SELECT buttons and select %HR program. Then confirm with ENTER.
3) SELECT USER
Press the SELECT button and choose one of the five user profiles (e. g. USER 1 or USER
2, etc.). Then confirm with ENTER.
NOTE: The user data is required here to design the training, thus, a guest user cannot
be selected.
4) 60%, 75%, 90% HEART RATE PROGRAM
Press the SELECT buttons and select desired heart rate range: 60 %, 75 %, 90 %. The
computer then calculates the optimal pulse in beats per minute based on your user
date. Then confirm with ENTER.
NOTE: You can immediately begin to train with the START button.
33
5) RESISTANCE LEVEL
In the main menu, hold the SELECT button to scroll and to select the resistance level.
Then confirm with ENTER.
6) TARGET VALUES
Target values are optional. Hold ENTER in order to skip all target value entries.
Press ENTER shortly in order to skip the individual target values. Press the SELECT
buttons to select a target value. Then confirm with ENTER.
7) ALARM
With the alarm, you can define the upper and lower limits for your training. Press START
in order to skip every alarm.
Press ENTER in order to skip an individual minimum and/or maximum alarm. Then
confirm with ENTER.
This function is optional.
8) START ROWING
If you get to the end of the selection process, the display will show:
START ROWING. Now you can either start to row or press ENTER to enter target values
and alarms.
NOTE: You cannot change the resistance manually during your workout.
4.3.5 TARGET HEART RATE PROGRAM (THR)
In addition to the preset heart rate zones, you can also manually set a target heart rate.
Every 30 seconds the computer will compare your current pulse with your target heart
rate and automatically adjusts the resistance level correspondingly. You can change
the target heart rate at any time while training by using the SELECT buttons.
NOTE: During your workout, you cannot adjust the resistance levels. This program
requires a pulse signal from a compatible chest strap.
NOTE: When selecting the heart rate, please make sure that it is not too high. The rule of
thumb for the maximum heart rate is 220 BPM minus age. Training with the maximum
heart rate is an extreme load. Those without training should begin training with at
most 60% of the maximum heart rate and initially increase their fitness level slowly.
1) HEART RATE PROGRAM
Press the SELECT buttons in the main menu and select HEART RATE. Then confirm with
ENTER.
NOTE: By pressing the MENU button, you can return to the main menu.
34
RX7
2) THR PROGRAM
Press the SELECT buttons and select THR (Target Heart Rate). Then confirm with ENTER.
3) SELECT USER
Press the SELECT buttons and select GUEST USER or one of the five saved user profiles
(e. g. USER1 or USER2, etc.). Then confirm with ENTER.
NOTE: Press START to immediately begin your workout.
4) RESISTANCE LEVEL
In the main menu, hold the SELECT button to scroll and to select the resistance level.
Then confirm with ENTER.
5) TARGET VALUES
Target values are optional. Hold ENTER in order to skip all target value entries.
Press ENTER shortly in order to skip the individual target values. Press the SELECT
buttons to select a target value. Then confirm with ENTER.
6) ALARM
With the alarm, you can define the upper and lower limits for your training.
Press START in order to skip every alarm.
Press ENTER in order to skip an individual minimum and/or maximum alarm. Then
confirm with ENTER.
This function is optional.
7) START ROWING
If you get to the end of the selection process, the display will show: START ROWING.
Now you can either start to row or press ENTER to enter target values and alarms.
NOTE: You can set the resistance levels during your workout with the help of the
SELECT buttons
4.3.6 Watt program
With the Watt program, you can constantly train with your selected output (Watt). The
computer will compare the selected value with the actual output every 20 seconds
and adjust the resistance if needed. You can adjust the target value with the SELECT
buttons while you are working out.
NOTE: During the workout, you cannot adjust the resistance levels; the target wattage
is adjusted in five-Watt increments with the SELECT buttons.
35
1) WATT PROGRAM
Press the SELECT buttons in the main menu and select WATTS. Then confirm with
ENTER.
NOTE: By pressing the MENU button, you can return to the main menu.
2) SELECT USER
Press the SELECT buttons and select the GUEST USER or one of the five available users.
Then confirm with ENTER.
3) WATT VALUES
Press the SELECT buttons and select the desired resistance output in watts. Then
confirm with ENTER.
NOTE: Press START to immediately begin your workout.
4) RESISTANCE LEVEL
In the main menu, hold the SELECT button to scroll and to select the resistance level.
Then confirm with ENTER.
5) TARGET VALUES
Target values are optional. Hold ENTER in order to skip all target value settings.
Press ENTER shortly in order to skip the individual target values. Press the SELECT
buttons to select a target value. Then confirm with ENTER.
6) ALARM
With the alarm, you can define the upper and lower limits for your training.
Press START in order to skip every alarm.
Press ENTER in order to skip an individual minimum and/or maximum alarm. Then
confirm with ENTER.
This function is optional.
7) START ROWING
If you get to the end of the selection process, the display will show:
START ROWING. Now you can either start to row or press ENTER to enter target values
and alarms.
NOTE: You can set the resistance levels during your workout with the help of the
SELECT buttons.
36
RX7
4.3.7 Profile programs
With the profile programs, the computer adjusts the resistance level corresponding
to the terrain profile. 24 preset programs, one random program and five individually
programmable programs are available to choose from. The resistance can also be
adjusted with the SELECT buttons during the workout.
1) PROFILE PROGRAM
Press the SELECT buttons in the main menu and select PROFILE. Then confirm with
ENTER.
NOTE: By pressing the MENU button, you can return to the main menu.
2) PROFILE SELECTION
Choose the desired profile program with the SELECT buttons. Then confirm with
ENTER.
NOTE: By pressing the MENU button, you can return to the main menu.
37
3) SELECT USER
Press the SELECT buttons and select GUEST USER or one of the five saved user profiles
(e. g. USER1 or USER2, etc.). Then confirm with ENTER.
NOTE: Press START to immediately begin your workout.
4) RESISTANCE LEVEL
In the main menu, hold the SELECT button to scroll and to select the resistance level.
Then confirm with ENTER.
5) TARGET VALUES
Target values are optional. Hold ENTER in order to skip all target value entries.
Press ENTER shortly in order to skip the individual target values. Press the SELECT
buttons to select a target value. Then confirm with ENTER.
6) ALARM
With the alarm, you can define the upper and lower limits for your training.
Press START in order to skip every alarm.
Press ENTER in order to skip an individual minimum and/or maximum alarm. Then
confirm with ENTER.
This function is optional.
7) START ROWING
If you get to the end of the selection process, the display will show: START ROWING.
Now you can either start to row or press ENTER to enter target values and alarms.
NOTE: You can set the resistance levels during your workout with the help of the
SELECT buttons.
38
RX7
4.3.8 Fitness Test
This is a six-minutes fitness test on the basis
of your recovery heart rate. The computer
must receive your heart rate signal through
a chest strap. Row for five minutes as fast as
you can in order to achieve your maximum
heart rate. The computer will then test your
heart rate recovery for one minute.
1) FITNESS TEST
Choose the Fit Test point in the main menu
with the SELECT buttons. Then confirm
with ENTER. NOTE: Press the MENU button
in order to return to the main menu.
FITNESS TEST RESULTS
SUPER FIT
90~100
EXTREMELY FIT
80~89
VERY FIT
70~79
GOOD FITNESS
60~69
AVERAGE FITNESS
50~59
FAIR FITNESS
40~49
POOR FITNESS
30~39
UNFIT
20~29
VERY UNFIT
10~19
EXTREMELY UNFIT
0~9
2) ROWING
Row for five minutes as intensively as you
can. Complete the training exactly after five minutes.
NOTE: You cannot set the resistance levels during your workout with the help of the
SELECT buttons.
4.3.9 Game
The GAME program offers a motivating change of pace. Row for five minutes and beat
the high score.
1) GAME
Choose the Game point in the main menu with the SELECT buttons. Then confirm
with ENTER.
NOTE: You can return to the main menu with the MENU button.
2) ROWING
You can repeat the race by pressing START again at the end of the race. You can leave
the game with the MENU button.
NOTE: You can set the resistance levels during your workout with the help of the
SELECT buttons.
39
4.3.10 User settings (USER DATA)
Under this menu item, you can enter your personal data for the computer to calculate
your personal calories burnt and heart rate zones.
The computer can save five user profiles. Your physical basic values are calculated
based on this data as well.
BBMI = Body Mass Index
BMR = Basal Metabolic Rate
TDEE = Daily calorie intake
NOTE: Update your user data regularly, otherwise the computer will provide you with
incorrect values (e. g. heart rate percent, consumed calories, BMI, BMR, TDEE).
NOTE: The data from the guest users will not be saved.
USER DATA INPUT
You can enter the following values for the user data input. Hold ENTER in order to skip
a setting.
NAME max. 12 characters letters and numbers
AGEin years
SEX
male or female
HEIGHT
in cm or ft/inches (see measurement selection for conversion)
WEIGHT
in kg or lbs (see measurement selection for conversion)
ACTIVE FACTOR Your activity influences your metabolism; this influences the calories
burnt during training. The active factor adjusts the calorie calculation of the computer
and your TDEE total calories burnt.
1-SITTING: Desk job with little or no daily sports
2-SLIGHTLY ACTIVE: easy exercises one to three days a week
3-MODERATELY ACTIVE: moderate exercises three to five days a week
4-VERY ACTIVE: intense exercises six to seven days a week
5-EXTREMELY ACTIVE: extremely active all day every day or fitness of a marathon
runner
1) USER DATA
Press the SELECT buttons in the main menu and select USER DATA. Then confirm with
ENTER.
NOTE: You can return to the main menu with the MENU button.
40
RX7
2) SELECT USER
Press the SELECT buttons and select NEW USER or one of the existing users (max. five).
Then confirm with ENTER.
3) NAME
Press the SELECT buttons and select a character. Then confirm with ENTER. Repeat the
process until your name is complete. Hold ENTER to skip the remaining characters.
4) SEX
Press the SELECT buttons and select your sex. Then confirm with ENTER.
5) AGE
Press the SELECT buttons and select your age in years. Then confirm with ENTER.
6) HEIGHT
Press the SELECT buttons and select your height. Then confirm with ENTER.
7) WEIGHT
Press the SELECT buttons and select your age in weight. Then confirm with ENTER.
8) ACTIVE FACTOR
Press the SELECT buttons and select your active factor. Then confirm with ENTER.
USER PROGRAMS
Each user can save their own program (PROFILE). To do this, select CREATE YOUR OWN
PROFILE. All profiles use the bar graph display (16 rows = 24 resistance levels and 20
columns = 20 time intervals). These user programs are very useful, because the profile
program is geared towards the user. This keeps motivation high.
The computer adjusts the resistance levels corresponding to the set profile. You can
set the resistance levels during your workout with the help of the SELECT buttons.
1) USER PROFILE
Choose the USER PROFILE point in the main menu using the SELECT buttons. Then
confirm with ENTER.
NOTE: You can return to the main menu with the MENU button.
2) SELECT USER
Select one of the five existing users. Then confirm with ENTER. If no users have been
created, you must first create a user.
41
3) PROFILE PROGRAM CREATION
Select the resistance level with the SELECT buttons. Then confirm with ENTER. Repeat
the process until your profile is complete.
NOTE: Hold ENTER to skip all remaining columns.
This is very useful if you only want to make small adjustments to your profile program.
USER DELETE
Es ist sehr einfach einen vorhandenen Benutzer zu löschen.
1) USER DELETE
Choose the USER DELETE point with the SELECT buttons. Then confirm with ENTER..
NOTE: Press the MENU button in order to return to the main menu.
2) SELECT USER
Press the SELECT buttons and select one of a maximum of five saved users. Then
confirm with ENTER.
3) CONFIRM DELETE
Press ENTER again to confirm the deletion.
HEART RATE RECEIVER FREQUENCY
Dealer optional 5 kHz or 2.4 GHz or both 5 kHz and 2.4 GHz together.
We the manufacturer sell to Dealers who in turn sell to shops around the world. The
Dealers have requested that this computer have Optional Analog and/or Digital Heart
Rate Receiver Frequencies.
Unfortunately, you the consumer do not have the choice.
So your computer will either be:
1)Fixed 5kHz Analog or
2)Fixed 2.4 GHz Digital or
3)Optional 5kHz Analog or 2.4 GHz Digital.
If the Main Menu does NOT display an „Optional Heart Rate Receiver Frequency“ choice,
then your computer has a fixed Heart Rate Receiver Frequency. At the top of the LCD
next to the Pulse Display Window the Heart Rate Receiver Frequency is displayed.
Although the 5kHz Analog Heart Rate Frequency (HRF) is the most common international
HRF it has problems with interference from a wide range of electrical devices, and has a
limited working distance.
42
RX7
The 2.4 GHz Digital Frequency is rapidly becoming the new standard for a wide range of
electrical products and has no working distance issues. However, it is more expensive
and it has compatibility issues. Therefore this computers 2.4 GHz Digital HRF Receiver is
only compatible with the provided 2.4 GHz Digital HRF Chest Strap. And the provided
Digital Chest Strap must be “Linked” with this computer using the “LINK 2.4GHz”
Program which can be accessed via the Main Menu providing that your computer is
2.4 GHz compatible.
1) OPTIONAL HEART RATE FREQUENCY 5 kHz or 2.4 GHz
From the Main Menu, press the SELECT Keys to scroll and select “5kHz 2.4GHz”.
Then press the ENTER Key to confirm your selection.
NOTE: To return to the Main Menu press the MENU Key.
2) 5 kHz or 2.4 GHz
Press the SELECT Keys to scroll and select either “5kHz” or “2.4GHz”.
Then press the ENTER Key to confirm your selection.
HOW TO
The HOW TO is the last menu point and briefly explains the functions of the buttons:
SELECT BUTTONS:
ENTER BUTTON: START/STOP/RESET BUTTON:
SCROLLING AND SELECTING
HOLDING SELECT BUTTON TO MOVE QUICKLY
CONFIRM A SELECTION
HOLDING ENTER BUTTON TO SKIP AN ENTIRE SELECTION
START WORKOUT
PRESS STOP TO STOP THE WORKOUT
HOLD RESET TO RESET THE COMPUTER MENU BUTTON = RETURN TO THE MAIN MENU
RECOVERY BUTTON = START RECOVERY PROGRAM
1) HOW TOO
Use the SELECT buttons to select the HOW TO point. A running text with the key
functions will be displayed in the bottom of the display.
43
RECOVERY PROGRAM
The recovery program evaluates your
fitness level by measuring how fast your
heart rate recovers within a minute
directly after a workout. The computer
must receive your heart rate signal during
the entire 60 second countdown. Then the
computer will indicate the points from
your heart cardiovascular system fitness
recovery from 0 to 100.
1) ACTIVATE RECOVERY PROGRAM
Immediately after your workout, press the
RECOVERY button and remain seated for a
minute while the program measures your
heart rate. You will receive your fitness
value after a minute.
RECOVERY TEST RESULTS
SUPER FIT
90~100
EXTREMELY FIT
80~89
VERY FIT
70~79
GOOD FITNESS
60~69
AVERAGE FITNESS
50~59
FAIR FITNESS
40~49
POOR FITNESS
30~39
UNFIT
20~29
VERY UNFIT
10~19
EXTREMELY UNFIT
0~9
2) RETURN TO THE MAIN MENU
You can return to the main menu at any time with the MENU button.
DISPLAY AFTER WORKOUT
At the end of your workout, the computer will automatically display the following
based on your user data:
BMI: Body Mass Index
44
Anzahl
Klassifikation
Risiko
Unter 18
Untergewicht
Geringes Risilo
19 - 25
Normal
Duchschnittiiches Risiko
26 - 30
Übergewicht
Hohes Risiko
31 Darüber
Adiposita
Extremes Risiko
RX7
BMR: The Basal Metabolic Rate indicates the minimum required number of calories to
supply a human in a rest state. This calorie amount (in kcal) would be consumed by the
body during a day of rest.
If you count the calories from your food every day, subtract the BMR and the burnt
calories during training - the result is an approximate indicator of if you will lose or gain
weight.
If you would like to lose weight, you have to reduce your calorie intake.
Slowly reduce your calorie intake over two to three weeks so that your metabolism can
adjust. Never reduce your daily calorie intake below you BMR.
TDEE: The total daily intake is an estimate of your daily intake of calories. We recommend
lowering your calorie intake moderately. Keep your calorie intake about half way
between your BMR and TDEE.
(TDEE + BMR) / 2 = WEIGHT LOSS
Classification Woman (% fat) Man (% fat)
Essential fat
10-13%
2-4%
Extremely low
14-20%
6-13%
Lower
21-24%
14-17%
Average
25-31%
18-25%
Obese
32% plus
26% plus
BODY FAT %: Your estimated body fat percentage
Target values
For many of the programs, you have the possibility to define target values (time, distance,
strokes, calories). The targets are optional if you do not enter a row, the computer will
automatically count up starting at one.
If you select one or several target values, the computer will count down from it. If the
first target value is reached, the workout will end.
You can set the following targets.
TIME 1:00 ~ 99:00 minutes (in 1-min increments)
METER 100 ~ 99.900 m (in 100-m increments)
STROKES 10 ~ 990 strokes (in 10-stroke intervals)
CALORIES 10 ~ 990 calories (in 10-calorie increments)
TARGET VALUES ~ TARGET VALUES are optional.
Hold ENTER in order to skip all TARGET VALUES. Press ENTER to skip an individual
TARGET VALUE.
Press the SELECT buttons to select a TARGET VALUE. Then confirm with ENTER.
45
Alarm
The alarm function is optimal for precise training control. You can replace maximum or
minimum alarms. If you exceed or do not meet the set value, an acoustic signal can be
heard with the note that you should row faster or slower.
You can choose between the following values:
TIME/500m 01:00 ~ 9:55 minutes and seconds (in 5-second increments)
TIME/500m DIVISION 10 seconds
PULSE 30 ~ 220 BPM (in 1-BPM-increments)
PULSE DISTRIBUTION 4 BPM
SPM 15 ~ 60 SPM (in 1-SPM increments)
SPM DISTRIBUTION 4 SPM
WATT 10 ~ 995 Watt (in 5-Watt increments)
WATT DISTRIBUTION 20 Watt
Choose the desired alarm value with the SELECT buttons. Then confirm with ENTER.
The alarm function is available for many programs, it is always optional.
If you would like to skip all alarm functions, hold START. Then you can start right way
with training.
Guidelines
Selection process
Resistance LEVELS 10 (1 ~ 24 in 1-LEVEL increments)
TIME/500M 2:15
Target values
TIME 20:00 minutes (1:00 ~ 99:00 in 1-minute increments)
METER 2000 m (100 ~ 99.900 m in 100-m increments)
STROKES 300 strokes (10 ~ 990 strokes in 10-stroke increments)
CALORIES 160 calories (10 ~ 990 calories in 10-calorie increments) alarm min and max
TIME/500m Min 2:10 ~ Max 2:20 (01:00 ~ 9:55 minutes and seconds in five-seconds
increments, division into 10 seconds)
PULSE Min 138 BPM ~ Max 142 (30 ~ 220 BPM in 1-BPM increments, division 4 BPM)
SPM Min 23 SPM ~ Max 27 SPM (15 ~ 60 SPM in 1-SPM icnrements, division 4 SPM)
WATT Min 95 ~ Max 105 (10 ~ 995 Watt in 5-Watt increments, division 20 Watt)
46
RX7
Interval program
NUMBER of INTERVALS 10 (2 ~ 99 in 1-interval increments) INTERVAL
DISTANCE 500 m (100 ~ 99.900 m in 100-m increments)
INTERVAL TIME 60 seconds (0:30 ~ 10:00 in five seconds increments)
REST TIME 30 seconds (0:30 ~ 10:00 in five seconds increments)
Target heart rate program
TARGET HEART RATE 140 BPM (30 ~ 220 BPM in 1-increments)
User data
YEARS 35 (10 ~ 99 in 1-year increments) SEX Female (or male)
HEIGHT METRIC Female 163 cm ~ Male 178 cm (90 ~ 240 cm in 1-cm increments) HEIGHT
IMPERIAL Female 5 ft 4 ~ Male 5 ft 10 (3 ~ 8 ft in 1-Inch increments) WEIGHT METRIC
Female 60 kg ~ Male 86 kg (30 ~ 200 kg in 1-kg increments) WEIGHT IMPERIAL Female
135 lbs ~ Female 190 lbs (60 ~ 440 lbs in 1-lb increments) ACTIVE FACTOR 2-slightly
active (1 sitting, 2 slightly active, 3 moderately active, 4 very active, 5 extremely active)
Measurement selection METRIC or IMPERIAL
The user data HEIGHT and WEIGHT can be entered either as metric or imperial
measurements.
HEIGHT in cm or ft and inches WEIGHT in kg or lbs MEASUREMENT SELECTION ~ Manual
Hold both SELECT buttons for three seconds.
Press the SELECT buttons and select METRIC or IMPERIAL. Then confirm with ENTER.
47
4.4 Operation infrared remote control
4.4.1 Introduction
Everybody knows how to use a TV remote control. The remote control from this rowing
machine uses the same technology. By pressing the remote control, the handle remote
control forwards data to the computer.
The INFRARED REMOTE CONTROL is a wireless data transmission system with a short
range, which requires a clear line of sight, this means there must be a clear, straight
line between the remote control and the training computer.
4.4.2 Inserting batteries
The battery compartment is delivered with plastic spacers, which separate the battery
from the battery clamp. This stops the battery from discharging during transport and
keeps it charged.
1) Inserting batteries
Remove the plastic spacer. Press the top of the battery compartment.
BATTERY
HOLDER
LOCKING
TAB
INFRARED LED TRANSMITTER
BATTERY HOLDER
PLASTIC SPACER
BATTERY
HOLDER
LOCKING
TAB
BATTERY HOLDER LOCKING TAB engaged
HANDLEBAR
BATTERY HOLDER
PLASTIC SPACER
MENU Key
BATTERY HOLDER LOCKING TAB engaged
48
RX7
SELECT Keys
-- +
DOWN & UP
4.4.3 List of parts
The remote control consists of two parts.
1) INFRARED TRANSMITTER (the source)
2) INFRARED RECEIVER
The infrared transmitter is mounted on the handle. The infrared receiver is installed in
the computer.
INFRARED LED TRANSMITTER
COMPUTER
BATTERY
HOLDER
LOCKING
TAB
INFRARED RECEIVER
HANDLEBAR
INFRARED LED TRANSMITTER
4.4.4 Main functions of theMENU
infrared
transmitter
Key
ENTER - DISPLAY Key
COMPUTER
The infrared transmitter has four buttons = MENU button - ENTER button - SELECT
button (DOWN - UP). These four buttons are exactly the same buttons as those on the
COMPUTER.
INFRARED RECEIVER
See COMPUTER MANUAL for detailed
HANDLEBARinformation about the button functions.
BATTERY
HOLDER
LOCKING
LOCKING TAB
engaged
TAB
SELECT Keys
-- +
DOWN & UP
MENU Key
ENTER - DISPLAY Key
ING TAB engaged
SELECT Keys
-- +
DOWN & UP
49
4.4.5 Replacing batteries
STEP 1
Press and hold battery holder lock, then remove the battery holder.
PUSH & HOLD
then PULL OUT
BATTERY HOLDER
BATTERY HOLDER
LOCKING TAB
STEP 2
a) Remove old battery and dispose of correspondingly.
b) Replace the battery, preferably with lithium CR2025 button
cell.
c) Pay attention to the polarity when you insert
the new battery.
+
WRONG
CORRECT
STEP 3
a) Carefully insert the battery hold back in (in the correct position) until the lock from
the battery holder locks.
++
BATTERY HOLDER
BATTERY HOLDER
LOCKING
TAB
LOCKING TAB
BATTERY HOLDER
BATTERY HOLDER
b) Check to see if the infrared remote control is working
correctly. If there are any problems, see the FAQs and
troubleshooting.
50
CORRECT
CORRECT
WRONG
WRONG
BATTERY HOLDER
BATTERY HOLDER
BATTERY HOLDER
BATTERY
HOLDER
LOCKING
TAB
LOCKING TAB
CORRECT
CORRECT
RX7
4.4.6 Infrared range and direction
The remote control should be directly aligned with the training computer.
51
nd the H A N D L E B A R S I N F R A R E D T R A N S MIT T E
from the C O MP U T E R S I N F R A R E D R E C E IV E
n
s to
ngle .
a
wa y
T R A N S MIT T E R i s
pointing u p a nd d own,
whic h i s n o w he re
c los e t o p ointing
towa rds t he
C O MP U T E R S
IN F R A R E D
R E C E IV E R .
4.4.7 ANGLE OF THE INFRARED TRANSMITTER FROM THE HANDLE
The Handlebars I nfrared Trans mitter Angle
In this i llus tra tion the
HANDLE B AR S
IN F R A R E D
T R A N S MIT T E R
is p ointing d ire c tly
towa rds t he
C O MP U T E R S
IN F R A R E D
R E C E IV E R .
WRONG
CORRECT
bar Pos ition
a
omple te ly
wa y
In this i llus tra tion the
C O MP U T E R S I N F R A R E D
R E C E IV E R a ngle i s c orre c t a nd
the H A N D L E B A R S I N F R A R E D
T R A N S MIT T E R i s i ns ide t he
C O MP U T E R S I N F R A R E D
R E C E IV E R a ngle .
In this i llus tra tion the
HANDLE B AR S
IN F R A R E D
T R A N S MIT T E R i s
pointing u p a nd d own,
whic h i s n o w he re
c los e t o p ointing
towa rds t he
C O MP U T E R S
IN F R A R E D
R E C E IV E R .
CORRECT
In this i llus tra tion the
HANDLE B AR S
IN F R A R E D
T R A N S MIT T E R
is p ointing d ire c tly
towa rds t he
C O MP U T E R S
IN F R A R E D
R E C E IV E R .
4.4.8 Code from the remote control
a tion the
NF R AR E D
i s c orre c t a nd
S I NF R AR E D
i s i ns ide t he
NF R AR E D
a ngle .
The code from the remote control (or RMC code in short) allows you to reprogram the
code from the infrared remote control. There are two reasons to reprogram the RMC
code:
1) There are several rowing machines with remote controls nearby and the infrared
rays overlap. This may be the case at health clubs and commercial facilities.
CORRECT
2) Disruption with existing infrared signals, for example, television or TV remote
control, etc. This happens primarily with home use.
WARNING: Do not reprogram the RMC code as long as it is not necessary, because the
infrared remote control may stop working if you make a mistake.
Handlbar
STEP 1
1a) Place the handle in the handle holder and
avoid touching the handle again until step 3a.
52
Handelbar
Holder
RX7
HANDLEBAR
HANDLEBAR
HOLDER
1b) Hold the RESET button for three seconds to
return to the main menu.
Current Infra-Red (IR) Code
New IR Code
STEP 2
2a) Im Hauptmenü drücken Sie die S ELECT Tasten und wählen “RMC CODE” Programm.
Dann drücken Sie ENTER, um Ihre Auswahl zu bestätigen.
2b) Now the computer displays your current IR CODE.
STEP 3
3a) Take the handle and point it with the infrared transmitter of the handle towards
the infrared receiver of the computer.
3b) Hold the handle button MENU. Then press either
“-”or “+” to select a new infrared card.
New IR Code
3c) Then press the ENTER computer button to
confirm the selection. The computer will return to
the main menu.
Note: The “Current Infrared IR Code Display” does
not change here. The change is first displayed the
next time the IR code is changed.
53
4.4.10 Troubleshooting manual
PROBLEM: The IR system only works with interferences.
SOLUTION
1) Clean the IR receiver on the computer with a little window cleaner.
2) Clean the IR transmitter on the handle with a little window cleaner.
3) Replace batteries. See point “Replace batteries”.
4) Program the IR/RMC code again. See point “Remote Control Code (RMC Code)”.
5) Ask for a service technician.
PROBLEM : The IR system does not work!
SOLUTION
1) Replace batteries. See point “Replace batteries”.
2) Program the IR/RMC code again. See point “Remote Control Code (RMC Code)”.
3) Ask for a service technician.
54
RX7
5 WORKOUT INSTRUCTIONS
5.1 Heart-rate measuring
Telemetric heart rate measuring
This rowing machine is already equipped with a heart rate receiver as standard. Using
a chest strap makes it possible for you to have a wireless heart rate measuring. This
optimal and ECG-precise type of measuring reads the heart rate directly from the skin
through a transmitting chest strap. The chest strap then sends the impulse to the
receiver integrated in the console.
Positioning the chest strap and moistening the electrodes:
Place the belt directly below the chest, while the transmitter should be placed on the
middle of the chest. The chest strap should sit comfortably, but not too loose. If the
belt is too loose, the contact to the electrodes may be disrupted or the belt may slip
while exercising. The transmitter turns on automatically once it is put on. In order to
allow for a precise measuring, you should moisten the rubber electrodes. This is best
done with a special chest strap contact gel, which is also used for ultrasound scans.
Note:
If you have not been active in doing sports for a longer period of time, you should
first go to your physician in order to discuss your training with them. You should also
contact your physician in advance in the event of heart problems, high/low blood
pressure and obesity.
Training with heart rate orientation
Heart rate orientation guarantees an extremely effective and healthy training. Through
your age and the following table, you can quickly and easily read and determine the
optimal pulse for your training. An acoustic alarm will sound if your heart rate exceeds
the set target heart rate. Which target heart rate is important for which training goal
can be found out in the following.
Fat burning (weight management): The main goal here is to burn deposits of fat. In
order to achieve this training goal, a low training intensity (approximately 55% of the
maximum heart rate) and a longer training period are required.
Cardiovascular training (cardio training): The primary goal is to increase endurance
and fitness through an improved provision of oxygen through the cardiovascular
system. In order to achieve this training goal, medium intensity (approximately 75%
55
of the maximum heart rate) with a medium training period is required.
Anaerobic (maximum) load training: The main goal of maximum load training is to
improve recovery after short, intense loads in order to be able to quickly return to the
aerobic zone. In order to achieve this training goal, a high intensity (approximately
90% of the maximum heart rate) with short, intense load is required, which is followed
by a recovery phase in order to prevent muscle fatigue.
Example:
For a 45-year-old man or woman, the maximum heart rate is 175 (220 - 45 = 175).
• The fat burning target zone (55%) is at approximately 96 beats/min.
= (220 - age) x 0.55.
• The cardio target zone (75%) is at approximately 131 beats/min.
= (220 - age) x 0.75.
• The maximum heart rate for an anaerobic load training (90%) is at ­approximately
157 beats/min. = (220 - age) x 0.9.
Heart rate diagram for training intensity
220
200
200
180
180
Heartbeats
160
150
195
175
146
190
171
143
140
120
110
107
105
185
166
139
102
100
180
175
162
135
157
131
99
96
170
153
128
94
165
148
160
155
150
144
139
120
116
113
91
88
85
83
55
60
65
70
124
136
80
20
25
30
35
40
45
50
Age
Maximum pulse (220-age)
90% of maximum pulse - anaerobic (maximum) intensity training
75% of maximum pulse - cardiovascular training (cardio training)
55% of maximum pulse - fat burning (weight control)
56
RX7
5.2 Notes on correct rowing
Body moves towards the handle
Wrong
At the end of the movement, the body will be
pulled forwards towards the handles instead the
handles to the body.
Right
At the end of the movement, the user slightly
leans back, holds the legs down, keeps the upper
body straight and pulls the handle to the body.
Straddled elbows
Wrong
The user’s elbows are straddled from the body
at the end of the movement and the handle is at
the height of the breast.
Right
Pull the handle to the body with straight wrists
and the elbows close to the body. The elbows
are brought behind the head while the handle is
pulled to your waist.
57
Do not completely extend
Wrong
At the end of the movement, the user completely
stretches the leg and knee.
Right
Keep your knee slightly bent at all times even at
the end of the movement instead of stretching
it completely.
Leaning too far forward
Wrong
The body is bent too far forward. The shins are
no longer vertical. The head and shoulders are
facing the feet. The body is therefore in a weak
position to execute the movement.
Right
The shins are vertical. The body is pressed against
the legs, the arms are completely stretched out
in front and the body is slight bent forward. This
position should be pleasant.
58
RX7
Rowing with bent arms
Wrong
The user begins the movement with the arms
instead of first pressing with the legs.
Right
The user begins by stretching out the legs,
relaxing the back and stretching the arms.
Bent wrists
Wrong
The user bents the wrists during the movement.
Right
Always execute the rowing movement with
straight wrists.
59
5.3 10 tips for effective rowing training
1. Set goals
What would you like to achieve with your training? Weight regulation, improved endurance, prevent risk of disease, more mobility, cardiovascular training, etc. In order
to achieve your long-term training goal, set individual partial goals, e. g., weekly or
monthly goals.
2. Concentration on training
Try to only dedicate yourself to your training unit and do not be distracted.
3. Position yourself correctly while exercising
When you execute the movement, your upper body should lean forward slightly and
your back should be straight. Avoid evasive movements in the hip or back area.
4. Correct breathing / appropriate resistance level
Do not overexert yourself physically and mentally by starting with resistance levels
that are too high. Start slowly and increase the resistance steadily. Aim for regular and
calm breathing.
5. Keep yourself properly hydrated
Drink, drink, drink! Have a drinking bottle close by during your workout.
6. Sufficient recovery phases
Allow your body and your muscles enough time to recover after your workout. Only a
relaxed muscle will be fully operational again.
7. Choose a diversified program
Switch your focus between different muscle groups and different levels of intensity
during your workout.
8. Creating the right workout
Every training session should have a warm-up phase, a cool-down phase and a targeted stretching. It increases physical and mental performance and prevents injuries
and sore muscles.
9. Workout journal
Keep a record of your training sessions. Note the date, resting pulse, active pulse, recovery pulse, resistance level, time, distance, calories burnt and fitness level.
60
RX7
10. Reward yourself
Do something good for you and your body after training or after achieving a partial
goal. Go to the sauna or a swimming pool. Mix a protein shake or enjoy a delicious
salad.
5.4 Designing a workout
We recommend two or three workouts per week. Warm up for about five minutes before starting each workout. Finish the workout with a cool-down and targeted stretching.
Warm-up approx. five minutes Dynamic movement of large muscle groups at a low intensity. Core body temperature increases and the metabolic process is speeded up.
WEEK 1 + 2
Beginner
Advanced
Days Duration Intensity
Duration Intensity
Mon
20 min.
Slow speed, no
resistance
30 min.
Moderate speed, keep
resistance low
Wed
20 min.
Slow speed, no
resistance
30 min.
Moderate speed, keep
resistance low
Fri
20 min.
Slow speed, no
resistance
30 min.
Moderate speed, keep
resistance low
In the first week, increase the speed in
between for two-minutes. Maintain heart
rate.
In the second week, increase the
speed for brief periods.
WEEK 3 + 4
Beginner
Advanced
Days
Duration
Intensity
Duration
Intensity
Mon
25 min.
Slow speed, no
resistance
35 min.
Vary speed, keep
resistance low
Wed
25 min.
Slow speed, no
resistance
35 min.
Vary speed, keep
resistance low
61
Fri
25 min.
Slow speed, no
resistance
In the third week, increase the resistance
slightly.
35 min.
Vary speed, keep
resistance low
In the fourth week, combine
forwards and backwards
movements.
WEEK 5 + 6
Beginner
Advanced
Days
Duration
Intensity
Duration
Intensity
Mon
30 min.
Moderate speed, keep
resistance low low
40 min.
Vary speed, keep
resistance low
Wed
30 min.
Moderate speed, keep
resistance low
40 min.
Vary speed, keep
resistance low
Fri
30 min.
Moderate speed, keep
resistance low
40 min.
Vary speed, keep
resistance low
In the fifth week, increase the resistance
slightly at moderate speed.
In the sixth week, alternate
between forwards and backwards
movements.
WEEK 7 + 8
Beginner
Advanced
Days
Duration
Intensity
Duration
Intensity
Mon
35 min.
Vary speed, keep
resistance low
45 min.
Vary speed, increase
resistance
Wed
35 min.
Vary speed, keep
resistance low
45 min.
Vary speed, increase
resistance
Fri
35 min.
Vary speed, keep
resistance low
45 min.
Vary speed, increase
resistance
In the seventh week, include short sprints.
In the eighth week, alternate
between forwards and backwards
movements.
Cool-downapprox. five minutes Finish your training at low resistance and at slow speed. Allow your body to gently slow back down.
62
RX7
5.5 Stretching exercises for leg & chest muscles
1. Exercise: Stretching of front thigh / leg extension (quadriceps)
• Stable position, grab arches of feet
• Pull heel towards buttocks, knee points downwards (no abduction)
• Straight upper body, avoid tilting the pelvic forward (hollow back) by tensing the abdominal muscles
• Change legs
2. Exercise: Stretching the back thigh / leg curl (hamstring)
• Pull thigh towards upper body with both hands
• Stretch through increased stretching in the knee joint
• The lower leg maintains contact with the floor, keep hips bent
• Change legs
63
3. Exercise: Stretching the calf muscles (gastrocnemius)
• Place feet parallel to each other pointing forward, the heels touch the floor
• Support yourself on a chair coming from a lunge
• Move your body weight to the front leg, press your heel from the rear leg towards the floor and hold the contact
• Slowly stretch your knee of the rear leg until you feel the stretch in your calves
• Change legs
4. Exercise: Stretching the chest muscles (pectoralis major)
• Stand parallel to a wall
• Place your forearm at 90° to the wall with the elbow just above shoulder height
• Turn your head and upper body gradually to the ­
opposite sides until you feel a stretch in the front chest, of the shoulder being leaned on
• Pay attention to tension in your abdominal and gluteal muscles
• Your weight is on your front leg
• Change legs
All recommendations of these instructions apply solely to healthy persons and
are not suitable for those with heart or cardiovascular problems. All of the tips
are intended only as a guide to help you create a workout. Your physician can
offer appropriate advice for particular, personal requirements.
We hope you enjoy your workout and have a lot of success!
64
RX7
(Copy template)
5.6 Workout journal
Date
Time (min.)
Distance
Training weight
Resistance level
Calories burnt
Ø Pulse
Body weight
I feel ...
65
6 WARRANTY INFORMATION
Taurus training fitness equipment is subject to strict quality controls. However, if a
fitness equipment purchased from us does not work perfectly, we take it very seriously
and ask you to contact our customer service as indicated. We are happy to help you by
phone via our service hotline.
Error descriptions
Your fitness equipment is developed for long-term, high-quality training. However,
should a problem arise, please first read the operating instructions. For further
assistance, please contact your contract partner or call our service hotline. To ensure
your problem is solved as quickly as possible, please describe the defect as exactly as
possible.
In addition to the statutory warranty, we provide a warranty for every fitness
equipment purchased from us according to the following provisions.
Your statutory rights are not affected.
Warrantee
The warrantee is the first/original buyer and/or any person who received a newly
purchased product as a gift from the original buyer.
Warranty periods
The following warranty periods begin on delivery of the fitness equipment.
Model
RX7-2
Use
Full warranty
Frame
Home use
24 months
30 years
Semi-professional use
12 months
Repair costs
According to our choice, there will either be a repair, a replacement of individual
damaged parts or a complete replacement. Spare parts, that have to be mounted
while assembling the equipment, have to be replaced by the warrantee personally
and are not a part of repair. After the expiration of the warranty period for repair costs,
a pure parts warranty applies, which does not include the repair, installation and
delivery costs.
66
RX7
The terms of use are defined as follows:
• Home use: solely for private use in private households up to 3 hours per day
• Semi-professional use: up to 6 hours per day (e. g. rehabilitation centers, hotels, clubs, company gyms)
• Professional use: more than 6 hours per day (e. g. commercial gyms)
Warranty service
Within the warranty period, equipment which develops faults as a result of material
or manufacturing defects, will be repaired or replaced at our discretion. Ownership
of equipment or parts of equipment which have been replaced is transferred to us.
The warranty period is not extended nor does a new warranty period begin following
repair or replacement under the warranty.
Warranty conditions
For the warranty to be valid, the following steps must be taken:
Please contact our customer service by email or phone. If the product under warranty
has to be sent in for repair, the seller bears costs. After expiry of the warranty, the buyer
bears the costs of transport and insurance. If the fault is covered by our warranty, you
will receive a new or repaired equipment in return.
Warranty claims are invalid in case of damage resulting from:
• misuse or improper handling
• environmental influences (moisture, heat, electrical surge, dust, etc.)
• failure to follow the current safety measures for the equipment
• failure to follow the operating instructions
• use of force (e. g. hitting, kicking, falling)
• interventions which were not carried out by one of our authorized service centers
• unauthorized repair attempts
Proof of purchase and serial number
Please make sure that you are able to provide the appropriate receipt when claiming
on your warranty. So that we can clearly identify the model of your equipment, and
for the purposes of our quality control, you will need to give the serial number of
your equipment, when contacting the service team. Where possible please have your
serial number and your customer number ready when you call our service hotline. It
will help us to deal with your request swiftly.
67
If you have trouble finding the serial number on your fitness equipment, our service
team is at your disposal to offer further information.
Service outside the warranty period
We are also happy to issue an individual cost estimate if there is a problem with your
fitness equipment after the warranty has expired, or in cases which do not fall under
the terms of the warranty, e. g. normal wear and tear. Please contact our customer
service team to find a quick and cost-effective solution to your problem. In such a case
you will be responsible for the delivery costs.
Communication
Many problems can be solved just by speaking to us as your contract partner. We
know how important it is to you as a user of the fitness equipment to have problems
solved quickly and simply, so you can enjoy working out with minimal interruption.
For that reason, we also want to resolve your queries quickly and in a straightforward
manner. Thus, please always keep your customer number and the serial number of
the faulty equipment handy.
7DISPOSAL
At the end of its operational life, this equipment cannot be disposed
of in normal household waste. Instead, it must be disposed of via an
electricals recycling centre. Further information can be obtained from
your local authority‘s recycling service.
The materials can be recycled as per their symbols. Through the reuse, recycling of
materials or other forms of recovery of old equipment, you make an important contribution to the protection of the environment.
Note for battery disposal
Do not dispose of used batteries in the household waste. Being the end-user, you are
obliged to dispose of used batteries at a commercial or municipal collection point.
You can also give the batteries, which you received from us, to one of our stores or
send these to our warehouse postage free (see contact details at the end of these
instructions).
Pb = Battery contains more than 0.004 percent by weight of lead.
Cd = Battery contains more than 0.002 percent by weight of cadmium.
Hg = Battery contains more than 0.0005 percent by weight of mercury.
68
RX7
8 ORDERING ACCESSORIES
Sport-Tiedje floor mat size XXXL
Art. No. ST-FM-XXXL
Polar transmitter chest strap T34
uncoded
Art. No. T34
Chest strap contact gel 250ml
Art. No. BK-250
69
9 ORDERING SPARE PARTS
9.1 Service hotline
So that we can give you the best possible service, please have your model name, part
number, serial number, exploded drawing and parts list ready.
SERVICE-HOTLINE
DE
FR
DK
80 90 16 50
+49 4621 4210-0
+33 (0) 172 770033
+49 4621 4210-945
+49 4621 4210-699
[email protected]
Mo. - Fr. 8:00 - 18:00
Sa. 9:00 - 18:00
[email protected]
Ma. - Fr. 8:00 - 18:00
Lø. 9:00 - 18:00
[email protected]
Lun. - Ven. 8:00 - 18:00
Sam. 9:00 - 18:00
NL
UK
INT
+31 172 619961
[email protected]
Ma. - Do. 9:00 - 17:00
Vr. 9:00 - 21:00
Za. 10:00 - 17:00
+44 141 876 3972
[email protected]
Mon. - Fri. 9:00 - 17:00
+49 4621 4210-933
+49 4621 4210-0
[email protected]
Mon - Fri 8:00 - 18:00
Sat 9:00 - 18:00
9.2 Serial number and model name
Before assembling your equipment, find the serial number on the white sticker and enter
it in the appropriate space.
Serial number:
Brand / category:
Model name:
Taurus rowing machine
RX7-2
70
RX7
9.3 Part list and explosed drawing - rowing machine
No.
Qty.
Description
No.
Qty.
001
Description
1
Aluminiumträger
109
1
Abdeckung vorne
002
1
Hauptrahmen
110
2
Innenabdeckung
003
1
Drehgelenk
111
2
Hauptabdeckung
004
1
Drehgelenkachse
112
1
Gitter
005
1
Vorderer Standfuss
113
1
Rollenabdeckung - Links
006
1
Hinterer Standfuss
114
1
Rollenabdeckung - Rechts
007
1
Hintere Halterung
115
2
Standfussabdeckung
008
1
Handgriff
116
1
Aluminiumträger Endkappe
009
2
Sitzgestell - Seitenplatte
117
2
Sitzgestell Abdeckung
010
2
Sitzgestell - Schaft
118
4
Sitzgestell - Rollen
011
2
Führungsrolle - Schraube
119
1
Sitz
012
2
Führungsrolle – Platte
120
1
Griffabdeckung oben
013
1
Fussstütze – Rechts
121
1
Griffabdeckung unten
014
1
Fussstütze – Links
122
2
Anschluss
015
1
Konsolenmast
123
1
Schaumstoffgriff
016
1
Halterung
124
1
Sitzstopper
017
1
Kupplungswelle
125
1
Feststellknauf
018
1
Rückholfeder
126
2
Versenablage
019
2
Führungsrolle - Abstandshalter
127
4
Versenablage - Stopper
100
1
Schieber
128
4
Führungsschien Versenablage
101
1
Schieberrolle
129
1
Lüftungsabdeckung
102
3
Kabelführung
130
1
Aluminium Drehkreuz
103
2
Konsolenmast Anschluss
131
2
Buchse
104
2
Konsolenmast Drehgelenk
132
1
Verkleidung Zugbandöffnu
105
2
Konsolenmast Endkappen
133
1
Batterieabdeckung
106
2
Abdeckung Konsolengehäuse
134
1
Poly “V” Riemen
107
2
Konsolenmast - Abstandshalter
135
1
Antriebsrad
108
1
Handgriffablage
136
1
Drehtrommel
71
72
No.
Qty.
Description
No.
Qty.
137
Description
1
Rückholfedertrommel
403
4
Unterlegscheibe
138
1
Rückholfeder Abdeckung
404
4
Unterlegscheibe
139
1
Rückholfeder Halterung
500
1
Unterlegscheibe
140
1
Schwungrad mit Magneten
501
34
Unterlegscheibe
141
1
Spannungsrad-Abstandshalter
502
8
Schraube
142
2
Führungsrolle
503
2
Schraube
143
2
Trittfläche
504
2
Schraube
146
1
Anschluss
505
8
Schraube
200
9
Mutter
600
1
Sprengring
201
2
Mutter
700
1
Spannungskabel
202
1
Mutter
701
1
Motor mit Kabel
203
1
Mutter
702
1
Motorsensorkabel
204
1
Mutter
703
1
Konsolenkabel
300
24
Schraube
704
1
Konsolenkabel
301
1
Schraube
705
1
Kabel
302
2
Schraube
706
1
Schwungradbolzen
303
4
Schraube
707
1
Schwungradfeder
304
2
Schraube
708
1
Sensormagnet
305
2
Schraube
709
1
Zugband
306
8
Schraube
710
2
Schlaufe für Fussstütze
307
1
Schraube
711
1
Herzfrequenzempfänger
308
1
Schraube
712
1
Netzteilkabel
309
1
Schraube
713
1
Batteriefach mit Kabel
310
1
Schraube
714
1
Konsole
311
1
Schraube
715
1
Netzteil
312
1
Schraube
800
2
Lager
313
2
Schraube
801
1
Lager
314
2
Schraube
802
2
Lager
400
1
Unterlegscheibe
803
1
Lager
401
8
Unterlegscheibe
804
1
Kupplung
402
2
Unterlegscheibe
RX7
73
9.4 Part list and explosion drawing - infrared remote control
(No.
Qty.
008
74
Description
No.
Qty.
Description
1
ALI HANDLE BAR
212
2
NUT
122
2
PLUG
213
2
NUT
123
1
FOAM GRIP
384
1
U-BOLT
161
1
INFRARED TRANSMITTER - TOP
461
2
WASHER PLATE
162
1
INFRARED TRANSMITTER - BATTERY HOLDER
529
4
SCREW
163
1
INFRARED TRANSMITTER - BOTTOM
709
1
DRIVE STRAP ASSEMBLY
RX7
75
CONTACT
Company head office
Sport-Tiedje GmbH
Flensburger Str. 55
24837 Schleswig
Germany
DE
Hotline for Technical Information
FR
DK
80 90 16 50
+49 4621 4210-0
+49 4621 4210-698
[email protected]
+33 (0) 172 770033
+49 4621 4210-945
+49 4621 4210-933
[email protected]
[email protected]
UK
NL
INT
+31 172 619961
+44 141 876 3986
+49 4621 4210-0
[email protected]
[email protected]
[email protected]
www.sport-tiedje.com
www.taurus-fitness.de
DISCLAIMER
©2011 TAURUS is a registered brand of the company S­ port-Tiedje GmbH.
All rights reserved. Any use of this trademark without the e­ xplicit written
permission of Sport-Tiedje is prohibited.
Product and instructions are subject to change. Technical data can be changed without
advance notice.
Please find a detailed overview including address and opening hours for all s­pecialist
fitness stores of the Sport-Tiedje Group in Germany and abroad on the following ­website.
76
www.sport-tiedje.com/en/stores
RX7
Note
77
Note
78
RX7
79
Rowing machine RX7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement