- Computers & electronics
- Data storage
- Data storage devices
- Solid state drives
- Super Talent Technology
- DuraDrive ET3 64GB
- Data Sheet
advertisement
DuraDrive ET3
Overview
IDE/PATA Solid State Drive
Super Talent’s DuraDrive ET3 displays the next generation of industrial data storage solutions through enhanced durability, reliability and performance environments considered “too harsh” for a standard drive.
Supporting access times of 0.1ms, the DuraDrive can reach read and writes speeds of up to 110/95 MB/sec. With ECC/EDC support, bad bit management firmware and patented wear leveling technology, the
DuraDrive ET3 is sure to fit your computing needs.
Featuring the industry standard 2.5” form factor and IDE/PATA interface, the DuraDrive ET3 is 100% interchangeable with conventional 2.5”
IDE/PATA hard drives.
This SSD is geared specifically for applications that require high shock, vibration, and/or reliability. Examples include:
• Medical Industry • Embedded/Industrial Systems
• Enterprise Computing • Aerospace • Casino Gaming
Physical Specifications
Form Factor
Capacity
Dimensions
Interface
NAND Flash
Power Supply
Package
DuraDrive ET3
2.5”
32-256GB(MLC),16-64GB(SLC)
100.2 x 69.85 x 9.5 mm
IDE/PATA
MLC/SLC
5V ± 10%
Complete metal housing
Environmental Specifications
Shock (Operating)
Vibration (Operating)
Operating Temperature (Industrial)
Operating Temperature (Commercial)
1500G
16G
-40°C ~ 85°C
0°C ~ 70°C
Ordering information
MLC
32 GB
64 GB
128 GB
256 GB
FE8032MD2D
FE8064MD2D
FE8128MD2D
FE8256MD2D
SLC
16 GB
32 GB
64 GB
FEK016MD2D
FEK032MD2D
FEK064MD2D
© 2014 Super Talent Technology. Specifications subject to change without notice. US patent #6,547,130 #7,243,185 #7,301,776 #7,318,117 and others apply.
*Usable capacity may be less than specified after formatting.
www.supertalent.com
p.1
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project