The Complete Vehicle Safety Solution

The Complete Vehicle Safety Solution
Transport Support
The Complete Vehicle
Safety Solution
Vehicle Safety Catalogue 2008
•
•
•
•
•
•
Vehicle Safety Systems
Inclinometers
Reversing Cameras
Overhead Cable Detectors
Body Up Indicators
Remote Controlled Systems
+44(0)1204 368 111
•
•
•
•
•
•
Warning Sounders
Safety Interlocks
Warning Beacons
Communications Equipment
Sat-Nav
Bespoke Safety Systems
www.transportsupport.co.uk
Introduction
Transport Support are leaders and innovators in the world of vehicle safety systems.
We liaise closely with the HSE and support our customers in their quest to eliminate
accidents with vehicle overturns causing nearly a fifth of all deaths within the
transport industry. It is our aim to make the industry standardize the TS Inclinometer
on all tipper vehicles, hookloaders, articulated haulers and dumpers.
Transport Support works very closely with OEM’s when installing safety systems &
liaises direct with the technical departments to determine warranty infringements.
Our staff have a very professional approach & are fully conversant with up-to-date
legislation.
Transport Support has become recognized as one of the market leaders in the field of
tipper safety and currently supplies the TS Inclinometer to most of the UK’s leading
aggregate producers and haulers which include companies such as CEMEX, Hanson,
Tarmac, Lafarge, Aggregate Industries, MQP, Hargreaves and Brett Aggregates.
2
Transport Support
Contents
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24
Page 25
Page 26
Page 27
Page 28
Page 29
Page 30
Page 31
Inclinometer Systems - TS Inclinometer Mk 2
Rigid Tipper Inclinometer Systems
Complete Vehicle Safety System
Operation of the system
TS HVDS (High Voltage Detection System)
Reversing Camera Systems
Reversing Camera Systems
Reversing Camera Systems
Reversing Camera Systems
Reversing Camera Systems
Reversing Camera Systems
Suzi Cables
TS Remote Controlled Safety Lighting
Warning Sounders
Reversing Aids
Reversing Aids
Reversing Aids
CB Radios
CB Radios
CB Radios
CB Antennas, Mounts and Accessories
TS Automatic Timer Switch (TSATS)
The TS Body Up Indicator
Rigid Body Up Indicator
Warning Beacons
Aerolite Series Amber Light Bars
Xenon Beacons
Hands Free Kits
Navigation
Bespoke Safety Systems
Transport Support
3
Products
Inclinometer Systems - TS Inclinometer Mk 2
The Mk2 TS Inclinometer is a safety device that
continually monitors the angle of the vehicle in
relation to the ground during the tipping process
and assists in the prevention of potential
overturns, safeguards against driver injury and
costly liability claims. Using state of the art three
dimensional sensor we are able to indicate left
and right movement of the vehicle chassis with an
accuracy of 0.1˚ through 360˚.
The system comprises of an in cab display unit, pneumatic valve, IP rated suzi connectors / suzi cable,
IP68 sensor cover c/w 3D sensor and protective ABS cover.
We are currently installing this system to rigid and articulated tipper vehicles, hook loaders, articulated
haulers, dumpers, cranes, shovel loaders etc.
Technical Specifications
General:
Voice Warning Sounder (optional):
Operating Voltage
24v DC
Operating Voltage
12-24v DC
Nominal Operating Current
400mA
Nominal Operating Current
500mA
Measurement Range (dependant
on model)
± 8° (Standard)
± 10° (Modified)
± 15° (Off Road)
Sound Level
85db
Frequency
Speech
Sensor Operating Temperature
-30°C to +55°C
Resolution
+/-0.1°
Valve Operating Voltage
24vDC
Valve Operating Current
170mA
Valve Operating Pressure
0-125 P.S.I
Valve Operating Temperature
0° To +50°C
4
Transport Support
M.I.R.A. tested for on and off highway (sounder
only)
Protection Ratings:
External Electronic
Connections
IP68
Sensor Casing
Aluminium IP68
Sensor Shield
ABS IP68
Products
Rigid Tipper Inclinometer Systems
The new TS Rigid Tipper Inclinometer has been
specially designed to meet the needs of rigid
tipper vehicle operators. The unit displays the
angle of the vehicle using a series of 15
Ultra bright LED’s (7 left, 1 indicating zero, and 7
right). The LED’s are arranged in various colours
to represent the increase in vehicle angle, 0-2
are green, 3-4 are amber and 5 - 7 are red. The
new TS Rigid Inclinometer control unit is much
smaller in size than our original unit which is
mainly aimed at articulated vehicles, it measures
just 130mm x 65mm x 25mm and can be easily
installed in any cab.
The system also features 12v - 24v supply, mute facility, 3 variable maximum angle settings and self
test. The TS Rigid Tipper Inclinometer is a cost effective system for 6 and 8 wheeled tippers or other
applications which do not require a suzi cable.
The system comprises of an in cab display unit, pneumatic valve, IP68 sensor cover c/w 3D sensor and
protective ABS cover.
Technical Specifications
General:
Voice Warning Sounder (optional):
Operating Voltage
12v to 24v DC
Operating Voltage
12-24v DC
Nominal Operating Current
400mA
Nominal Operating Current
500mA
Measurement Range (dependant
on model)
±5° (Standard)
±8° (Modified)
±10° (Off Road)
Sound Level
85db
Frequency
Speech
Sensor Operating Temperature
-30°C to +55°C
Resolution
+/-0.1°
Valve Operating Voltage
12-24vDC
Valve Operating Current
170mA
Valve Operating Pressure
0-125 P.S.I
Valve Operating Temperature
0° To +50°C
M.I.R.A. tested for on and off highway (sounder
only)
Protection Ratings:
External Electronic
Connections
IP68
Sensor Casing
ABS IP68
Sensor Shield
ABS IP68
Transport Support
5
Products
Complete Vehicle Safety System
In Cab Control Unit
7” Flat Screen Monitor (Colour TFT)
For reverse/ body viewing
Internal Voice Warning System
Hydraulic Ram Interlock
Single SUZI Cable
External Voice Warning Sounder
•
•
•
•
•
•
•
•
•
•
•
•
•
•
6
Tailgate
Open/ Closed Sensor
Body View Camera
Body Up Warning Light
Body Angle Sensing
Inclinometer Sensor
Rear View Camera
The TSI 2 is a vehicle safety system specifically designed to meet the needs of the Aggregates Industry and
has been
developed in conjunction with Hanson Aggregates.
TSI 2 incorporates various safety features to improve the safety of tipper vehicles. These features include the
following;
A Horizontal digital inclinometer device which can measure the vehicles angle up to 5.5° with left and right roll
indication in 0.5° increments.
External Voice Warning Sounder - Warns bystanders of potential danger. When the system goes into an alarm
state, the sounder reads “DANGER! STAND CLEAR, UNSTABLE VEHICLE”.
A colour rear view CCTV system. This incorporates up to two high resolution infrared colour cameras and a 7”
colour flat TFT screen which is integrated into the same SUZI cable as the TSI 2 System.
Body Up/Down warning Light - Indicates when the body is raised off the chassis. This is a current legal
requirement for tipper vehicles.
Tailgate closed warning which prevents the tipper body from being raised above a set height with the tailgate
closed.
Body Angle/Height sensor.
Single SUZI cable - The system only uses a single SUZI cable unlike other systems using separate SUZI’s for
inclinometer, camera etc.
In cab voice warning system - This is a spoken voice that warns the driver of possible danger. The voice
warning system allows the driver to concentrate on the tipping process rather than looking at a display screen.
Hydraulic Interlock - The system has the capability of stopping the tipper body being raised when the system
goes into an alarm state. i.e. when a dangerous vehicle angle is detected or when the tailgate is closed above
a set body height.
Self Test facility - The system automatically self tests when the system is powered. There is also a self test
feature which can be activated at any time by pressing the mode button.
Power Override - This feature prevents the driver from switching the system off when it goes into an alarm
state. This forces the driver to act on the alarm warning and put the vehicle into a safe position. i.e. lower the
tipper body and reposition on level ground.
The Complete Vehicle Safety System
Transport Support
Products
Operation of the system
When the tipper body is down the Inclinometer will NOT
alarm in any state, even if the maximum horizontal angle
is exceeded. This allows the driver to move the vehicle
around a tipping sight using the inclinometer as a guide to
find level ground. If, however, the driver tries to raise the
body with the maximum horizontal angle exceeded, the
system will instantly alarm when it sees the tipper body
lift more than 20mm off the chassis.
If the body is raised to an angle of approximately 20°
from level the body angle sensor (B) will activate. If the
system sees the magnetic contact (C) closed it will go into
alarm. The warning on the control unit display reads:REAR DOOR CLOSED, SLOWLY LOWER BODY. Note; The
external sounder will not be activated in this mode as it
is not an immediate danger to bystanders, there is only
a voice message within the cab which reads “WARNING!
TAILGATE CLOSED”
As with the alarm for the horizontal angle, the alarm will
not reset until the tipper body has been completely
lowered back to the trailer chassis (forward proximity
sensor). In alarm mode the control unit can not be
switched off as the power switch is overridden. This forces
the driver to act on the warning and lower the body.
Once the rear door is completely open the vehicle can
resume tipping as normal, with the Inclinometer
monitoring the horizontal angle of the vehicle. This system
has the added advantage of preventing the vehicle from
tipping if it is already on a steep incline, as this would only
add to the problem of the weight shifting to the rear of the
vehicle which could affect it’s stability.
The TSI 2 also features a CCTV system which can use up
to two cameras. One fitted to the rear of the vehicle to
improve revering safety and one mounted at the front of
the tipper body to monitor loading and tipping. The
camera system will automatically engage the rear view
camera when reverse gear is engaged.
A body Up/Down warning indicator is fitted to the offside
indicator arm on the tipping trailer. It is mounted so as to
be in the line off sight when looking in the rear view
mirror. The body up warning indicator will flash if the body
is raised off the trailer chassis. This indicates to the driver
that his tipper body is not completely lowered. This
feature is a current legal requirement on all tipper
vehicles. The body Up warning indicator uses red and
white ultra bright LED’s which flash in an intermittent flash
pattern and are highly directional so that it can not be
mistaken for any other indicator or running light.
Transport Support
7
Products
TS HVDS (High Voltage Detection System)
Ideal for all plant and machinery with variable
height…..
The TS HVDS is designed to prevent vehicles and
machinery with a variable height from coming into
contact with high voltage overhead power lines.
The system consists of a cabmounted detection
antenna and an in cab audio/visual warning unit.
The system can sense the presence of overhead
power cables from up to 80 metres away warning
the operator of the potential danger.
Supplied as a standalone unit (12-24v) or as an integrated part of Transport Supports vehicle safety
systems.
Can be easily fitted to: Tipper Vehicles, Excavators, Telehandlers, Cranes, Platforms, JCB’s etc…
Technical Specifications
Operating Voltage
12-24 V DC
Nominal Operating Current
< 150mA
Size
W 130mm x
H 65mm x
D 25mm
Weight
155g
Nominal Operating Temperature
-5°C to +55 °C
HV Detection Range
Up to 100 metres*
Warning Tone
High pitch pulsed
buzzer approx.
85db
Visual Warning
High Intensity red
flashing LED
Power Indicator
High Intensity
green LED
Mute Facility
System can be
muted once
activated. When
Mute is active a
double reminder
tone is emitted
every 30 seconds.
Detection Antenna
Length
235mm
Weight
60g
This system can be supplied as a standalone unit or as part of the TS Complete Vehicle Safety System.
8
Transport Support
Products
Reversing Camera Systems
High Specification 7” Colour TFT Flat Screen Reverse Camera System
Smart, Stylish and fully featured. Ideal for night
work!
Most other cameras on the market have 6 IR
LED’s our camera uses 18!
This greatly extends the viewing range at night.
The kit comes ready to install, complete with all
fixings and full instructions.
Features:
•
•
•
•
•
•
•
•
•
•
7” High resolution Flat TFT Colour Monitor
12v or 24v Operation
Can use up to 2 colour cameras
Automatically switches on when reverse gear
is selected.
High resolution CCD Camera
Colour/Brightness/Contrast & Tint adjustments
18 infrared LED illumination for night operation
Wide 153˚ viewing angle
Remote Control
Heavy duty metal armoured camera housing,
heated to prevent fogging and freezing.
• Audio/Video input/outputs (can be connected
to DVD player)
• Can be supplied with sound option (built in
microphone in camera)
• Fully adjustable pan/tilt mount.
• Supplied with everything needed to fit directly
to your vehicle.
High Specification 7” Colour TFT Flat Screen Wireless
Smart, Stylish and fully featured. Ideal for night
work!
Most other cameras on the market have 6 IR
LED’s our camera uses 18! This greatly extends
the viewing range at night.
The kit comes ready to install, complete with all
fixings and full instructions.
Features:
•
•
•
•
•
•
•
•
•
•
7” High resolution Flat TFT Colour Monitor
12v or 24v Operation
Can use up to 2 colour cameras
Automatically switches on when reverse gear
is selected.
High resolution CCD Camera
Colour/Brightness/Contrast & Tint adjustments
18 infrared LED illumination for night operation
Wide 153˚ viewing angle
Remote Control
Heavy duty metal armoured camera housing,
heated to prevent fogging and freezing.
• Audio/Video input/outputs (can be connected
to DVD player)
• Can be supplied with sound option (built in
microphone in camera)
• Fully adjustable pan/tilt mount.
• Supplied with everything needed to fit directly
to your vehicle.
Transport Support
9
Products
Reversing Camera Systems
TS 5.8” Colour TFT Flat Screen With Suzi Kit
The lastest in our range of Colour TFT Reversing
Cameras...
Specially designed to suit articulated vehicles, our
new 5.8” TFT colour reversing camera includes
a full suzi cable kit and can be used with up to 2
cameras. eg one at the rear of the vehicle and one
looking into the tipper body.
Features:
•
•
•
•
•
Screen size: 5.8 inch
Type: TFT LCD Monitor [16: 9] display
Input: 2 ways video, 1 audio input (optional)
Suitable for camera/DVD/VCD player
Manual & automatic sequential switching
between CAM1, CAM2 (can switch on when
reverse gear is selected)
• Trailer Connector
• 7P/12V & 24V spiral cable
• TPE cable 6*1.0+1*1.5 square millimeter, with
hand hook injection plastic plugs coil diameter
50mm,work length 3.0m,maximum extension
length 4.5m
TS Flat 3.5” Colour TFT
Ideal for vans and small tipper vehicles. Can be
used with up to two cameras. The kit comes ready
to install, complete with all fixings and
instructions. This unit can automatically switch on
when reverse gear is selected and is also supplied
with an IR remote control.
Features:
•
•
•
•
•
•
10
3.5 inch TFT Colour Reverse Camera system
System: PAL/NTSC
Resolution: 1440(H) *234(V)
Brightness: 300nits
Contrast Ratio:250:1
Viewing area *left/right:60°,top/bottom:20°/40°.
Transport Support
•
•
•
•
•
•
•
Video input: V1/V2
Picture Mode:16:9 Screens
Power supply: 12 or 24V* DC
Operating temperature: 0°-50°
Storage temperature:-20°-65°
Dimensions: 13*5.8*9cm
Weight: 1.5kg
Products
Reversing Camera Systems
TS Flat 2.5” Colour TFT
Ideal for cars, vans and small tipper vehicles. The
system uses one CCD IR bullet camera. The kit
comes ready to install, complete with all
fixings and instructions. This unit can
automatically switch on when reverse gear is
selected.
Features:
•
•
•
•
•
•
•
2.5 inch TFT Colour Reverse Camera system
System: PAL/NTSC
Picture Mode:16:9 Screen
Power supply: 12 or 24V* DC
Operating temperature: 0°-50°
Storage temperature:-20°-65°
Voltage converter required for 24v operation.
TS Camera Bracket
Fit a second body view camera using our extended
camera bracket.
Standard Size: 6” x 12” with 4” square plates
Any size available to order.
Comes complete with fixing kit
Transport Support
11
Products
Reversing Camera Systems
Budget 5.5” Black and White CRT Reverse Camera System
Features:
A quality camera system at a budget price! With a
full 12 month warranty.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Waterproof to IP67
Built in microphone
Can use up to 2 cameras
11v ~ 32v Operation
Full infrared for night operation
Auto night time dimming to prevent glare
Positive/Mirror image option
Audio/Video Outputs
Rubberised scratch resistant surface
Sun shield and anti glare screen
Near sunlight viewable.
Range markers on screen to aid reversing.
Supplied with 20mtrs of cable
Full fixing kit and instructions
Optional SUZI cable for articulated vehicles. 24v to 12v Voltage Reducer
Technical Specifications:
High quality voltage reducers featuring
protection against short circuits, over
temperature, over voltage output and reverse
polarity.
Also available in 10A & 20A versions
12
Transport Support
Input Voltage
20-30V DC
Output Voltage
13.5 +-0.5V DC
Continuous Load
RT5
3A
Max Load
RT5
5A
Dimensions
RT5
Weight
RT5
130 x 115 x 37mm
280gr
Products
Reversing Camera Systems
TS Colour IR Camera (18 LED)
•
•
•
•
•
•
•
Features:
• Image Sensor 1/3 OV COLOUR CMOS or
SHARP CCD
• TV System NTSC/PAL optional
• Effective Pixels NTSC-510(H)*492(V)
• PAL: 500(H)*582(V)
• Horizontal Resolution 380/420 Line
• Sync Mode Internal Sync
• IR Distance 15 m
• Lens angle 120°
•
•
•
•
•
•
•
•
•
Minimum Illumination 0lux (LED ON)
IR LED 18PCS
IR on-off status ≤10Lux CDS on
IR on-off control CDS Automatic control
S/N Ratio ≥48dB (AGC Off)
Video Output 1Vp-p 75 Ohm
Shutter Speed Auto NTSC: 1/60-1/100,000
Second
Auto PAL: 1/50-1/100,000 Second
Operating Temperature -10˚C~+50˚C RH95%
Max
Storage Temperature -25˚C~+60˚C RH95%
Max
Len F: 2.1mm
White Balance auto
Power Supply DC12V 400mA
Size 72mm (L)*52mm (w)*42mm (H)
G.W 480g
Water-proof, shock proof, and high-voltagesurge proof, CDS auto-detect luminous flux,
zero of luminous flux at night.
TS Colour IR ‘Bullet’ CCD Camera (9 LED)
An alternative version of camera to fit our range
of reversing camera systems.
Features:
• Image Sensor 1/3”COLOUR OV SHAPP CCD
• TV System PAL/NTSC optional
• Effective Pixels PAL: 512(H)*582(V) NTSC:
512(H)*492(V)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Horizontal Resolution 380/420Line
Sync Mode Internal Sync
Scanning System 2:1 interlace
Minimum Illumination 0lux (LED ON)
IR Distance 6 m
Lens angle 92°/120°
IR LED 10PCS
Lens F=3.6mm/2.8mm
Video Output RCA interface, 1Vp-p 75 Ohm
Gamma Characteristic 0.45
S/N Ratio ≥46db/≥48db (AGC-OFF)
Backlight Compensation auto
White Balance auto
Shutter Speed 1/50(1/60)-1/100000 Second
Power Supply DC 12V
Storage Temperature -20˚C~+70˚C RH95%
Max
Storage Temperature -40˚C~+80˚C RH95%
Max
Size 25*42mm / 25*74mm
G.W 70g /95g
Waterproof
Transport Support
13
Products
Reversing Camera Systems
TS Wireless Colour IR Camera (18 LED)
•
•
•
•
•
•
•
•
•
•
Compatable with TS Wireless Camera Systems
•
Features:
•
•
•
•
•
•
•
•
•
•
•
•
•
Image Sensor 1/3 OV COLOUR SHARP CCD
TV System NTSC/PAL optional
Effective Pixels NTSC-510(H)*492(V)
PAL: 500(H)*582(V)
Horizontal Resolution 380/420 Line
Sync Mode Internal Sync
IR Distance 15 m
TS DVR (Digital Video Recorder)
Features:
• Records Video/Audio or Still Images
• 13.8v Power Supply with Battery Backup
• Image resolution: Records 320 x 240 MP4 Or
snapshot 320 x 240 JPEG
• Automatic Motion Detection feature
• Internal rechargeable Li-on Batteries,
External: AC charger or Vehicle Adapter
• Recorder Dimensions: 140mm (L) x 75mm
(W) x 27mm (H)
• Memory capacity: Any size SD card (not
included.
Pack Contains: 1xDVR, IR Remote Control,
Charger/power adaptor, AV connection leads.
14
Transport Support
Lens angle 120°
Minimum Illumination 0lux (LED ON)
IR LED 18PCS
IR on-off status ≤10Lux CDS on
IR on-off control CDS Automatic control
S/N Ratio ≥48dB (AGC Off)
Video Output 1Vp-p 75 Ohm
Shutter Speed Auto NTSC: 1/60-1/100,000
Second
Auto PAL: 1/50-1/100,000 Second
Operating Temperature -10˚C~+50˚C RH95%
Max
Storage Temperature -25˚C~+60˚C RH95%
Max
Len F: 2.1mm
White Balance auto
Power Supply DC12-24V 400mA
Size 72mm (L)*52mm (w)*42mm (H)
G.W 480g
Water-proof, shock proof, and high-voltagesurge proof, CDS auto-detect luminous flux,
zero of luminous flux at night.
The TS DVR is the latest in miniature mobile
digital video/audio/data storage devices. It can be
used as a standalone system (with a single
camera) or can be connected to almost any
vehicle reversing camera system. The system is
intended to constantly record video/audio from
vehicle mounted cameras to be used as evidence
in the event of and accident or in the detection/
prevention of crime. All images are time and date
stamped and stored digitally on a solid state SD
memory card (of any size) which can be played
back via the unit or on a computer.
It can be thought of as a ‘black box’ recorder for
vehicles which in the event of accident can be
used to discover what actually happened during
an investigation or insurance claim. Another use
for the system is in Taxis and public transport
where the camera monitors the passengers
onboard the vehicle to capture evidence of non
paying or violent passengers.
The TS DVR system is fully compatible with all
Transport Support reversing cameras and a
variety of standalone cameras are available.
Products
Suzi Cables
TS Universal 6 Way Single Suzi Kit
As used on early TS Inclinometer Mk1 installations
and on new TS Reversing Camera Systems. Can be
used as a replacment for damaged TS
Inclinometer suzi or for running cameras,
weighing systems, lights, etc or combinations of
these through a single suzi unit.
IP65 Rated , 4 Bolt Fixing, Fully Locking
Kit Contains: 1 x Suzi Cable c/w plugs, 2 x Sockets
(Male/Female)
Fixings Supplied.
TS Universal 10 Way Single Suzi Kit
As used on older TS Inclinometer Mk1 installation.
Can be used as a replacment for damaged TS
Inclinometer suzi or for running cameras,
weighing systems, lights, etc or combinations of
these through a single suzi unit.
IP65 Rated , 4 Bolt Fixing, Fully Locking
Kit Contains: 1 x Suzi Cable c/w plugs, 2 x Sockets
(Male/Female)
Fixings Supplied.
TS Universal 16 Way Double Suzi Kit
As used on most TS Inclinometer Mk2 installation.
Can be used as a replacment for damaged TS
Inclinometer suzi or for running cameras,
weighing systems, lights, etc or combinations of
these through a single suzi unit.
IP65 Rated , 4 Bolt Fixing, Fully Locking
Kit Contains: 1 x Suzi Cable c/w Plugs 2 x Sockets
(Male/Female)
Fixings Supplied.
Transport Support
15
Products
TS Remote Controlled Safety Lighting
Our Remote Controlled Lighting system was
originally designed to provide access lighting to
the operators of large quarrying vehicles which
were parked in dark areas of the quarry. The
standard system switches on a 24v 70W halogen
flood light (equivalent of a car headlight) which is
mounted above the access ladders to the vehicle,
usually on the cab roof. This provides safe access
and approach to the vehicle particularly on early
mornings and dark winter nights.
Standard System Features:
•
•
•
•
•
•
•
30 metre remote control range
12 or 24v operation
Adjustable 70 Watt Halogen Flood Light
Simple single wire connection
Remote key fob
Latching or momentary operation
Each key fob is uniquely programmed to work
with each unit.
• Each receiver unit can have up to 7 key fobs
attached to it.
• 1 key fob can be programmed to work with
any number of receivers.
• The standard system will switch one device up
to 250v 5A.
We can also offer various other options.
See below.
Options:
• Remote control range up to 5 km
• Up to 3 switching outputs as standard or as
many as 16 on request.
• Various light options (flood, spot beam, multiple light, colours etc)
• Various timed switching options
• Please contact us with any bespoke
requirements.
16
Transport Support
The kit itself is very simple and consists of a
square 24v 70W work lamp (similar to the ones
already fitted to Volvo/CAT vehicles) on an
adjustable bracket, a small control box (which can
be hidden inside the cab), a remote key fob, all
fixings, full instructions etc…
A light can be mounted to the roof of the cab (or
other suitable location) and is easily capable of
illuminating the access ladders and a considerable
area on the approach to the vehicle
The system has now been developed into a fully
functional remote switching system which can be
used to remotely operate almost anything.
Examples:
•
•
•
•
•
•
Work/Access Light
Beacons
Auto Sheeting
Sounders/Sirens
Locking Devices/Security
Location/Tracking
Products
Warning Sounders
Night Silent Reverse Alarm 12/24V
•
•
•
•
Single Bolt Fixing
CE marked EMC
Pressure washable
Sonic welded and epoxy sealed for greater
durability against water and vibration
• M.I.R.A. tested for all on and off road
applications
• Waterproof
• With third lead orange (night silent) mutes the
unit when the side lights are in use
Transport Support stock a range of advanced fixed
volume and talking reverse sounders. The
following models are available from stock but
other versions are available on request.
• Standard ‘Bleeping’
• Talking ‘Stand well clear, vehicle reversing’
• Talking ‘Danger! Stand clear! Unstable vehicle’
(for use with inclinometer systems)
Talking Alarm 12/24v
Talking alarms are becoming more and more
popular, especially as they can be tailored to suit
very specific applications. They are widely used
by many manufacturers to highlight specific
dangers:
•
•
•
•
Handbrake not applied
Deck moving (for walking floor trailers)
Arms raised (for skip loading vehicles)
They can also advertise corporate names
We can supply any message in any language
usually in a couple of days at a minimal cost.
(Foreign language messages must be on CD
Rom.)
All other messages must be in writing to avoid
mistakes. Once programmed repeat orders do
not incur a programming charge. These units are
available with reduced volume to facilitate use
in cab where in some cases there are too many
buzzers and the driver/operator can confuse the
cause of the problem. They can be fitted with any
length of cable and connector.
•
•
•
•
•
Single Bolt Fixing
CE marked EMC
Pressure washable
Waterproof
M.I.R.A. tested for on and off highway
Technical specification:
Volts
db level
Frequency
Current
Size
Fixing
12 - 24
85 db
Speech
0.5 A
76 (D) x 75
Single Bolt
Transport Support
17
Products
Reversing Aids
LCD Front & Rear Parking System (6 sensor)
Our latest range of reversing sensor systems.
Illuminated LCD 6 sensor, front & rear parking
system.
This system is designed to help avoid collisions
when the vehicle is reversing.
Automatically activates when the vehicle is put
into reverse
Detects objects behind vehicle up to 2.5mtrs
Shows range and position in metres to obstacle
Audible tones signal range to obstacle
Ideal for vehicles manoeuvring in confined areas
or close pedestrians
Technical:
Packing Details:
• Working voltage: 10 - 28v
• Max Power: 5W
• Max display distance:
Rear 0.22 ~ 2.5m Front 0.15 ~ 0.30m
Rear: 0~1.7m Front: 0~0.30m
• Min display distance: 15cm
• Alarm Volume: mute ~ 70db & 90db
• Working Temperature: -35˚C ~ +80˚C
• 2 x ECU (1 for front, 1 for rear)
• 1 x Alarm Unit (Digital LCD display c/w built in
buzzer & cable
• 6 x Ultrasonic waterproof paintable sensors
with cable & waterproof connectors (4 with
connectors)
• Accessories; User Manual, double sided
adhesive pad, connectors & drill bit.
• Warranty Card
Features:
• 2 front, 4 rear, total of 6 sensors
• Both rear and front sensors will work together
and will avoid colisions even in narrow parking
spaces.
• The only system in the world capable of
15cm detection in front sensors whoich start
from 30cm for warning to avoid unnecessary
warnings from the corners.
• Will indicate the front and rear obstacles
distance at the same time on disply unit.
• User friendly software will warn the driver of
the nearest obstacle.
• Rear sensors will start detection from 2m
• Front sensors can detect obstacles between
0.3m ~ 0.15m
• Will indicate an obstacle at front from 15cm
and rear from 22 cm.
18
Transport Support
• Will indicate the location of the obstacle either
at front or rear on its antireflective display
unit.
• 7 stage audible warning zones.
• 3 levels of adjustable volume (low, high and
mute).
• Middle sensors can start audible warning from
1.7m
• Corner sensors can start audible warning from
1m
• Minimum blind area with 6 superior sensors.
• Waterproof sensors and sockets.
• Reliable working temperature between -35˚C
and +80˚C
• Self diagnostic function shows the faulty
sensor on the display and gives audio warning then bypassses the faulty sensor and
continues to work with the rest of the sensors.
Products
Reversing Aids
LCD Parking Sensor System (4 Sensor)
Our latest range of reversing sensor systems.
Illuminated LCD 4 sensor parking system.
This system is designed to help avoid collisions
when the vehicle is reversing.
• Automatically activates when the vehicle is put
into reverse
• Detects objects behind vehicle up to 2.5mtrs
• Shows range and position in meters to
obstacle
• Audible tones signal range to obstacle
• Ideal for vehicles manoeuvring in confined
areas or close pedestrians
Technical:
Packing Details:
•
•
•
•
•
•
• 1 x ECU
• 1 x Alarm Unit (Digital LCD display c/w built in
buzzer & cable
• 4 x Ultrasonic waterproof paintable sensors
with cable & waterproof connectors
• Accessories; User Manual, double sided adhesive pad, connectors & drill bit.
• Warranty Card
Working voltage: 10 - 28v
Max Power: 5W
Max display distance: Rear 0.22 ~ 2.5m
Min display distance: 22cm
Alarm Volume: mute ~ 70db & 90db
Working Temperature: -35˚C ~ +80˚C
Features:
• Can detect an obstacle from 2.5m and show
on LCD display with a 1cm accuracy.
• Can detect a person around 1.3 ~ 1.7m
behind the vehicle.
• Able to show the minimum distance of 22cm.
• Will show the location of the obstacle
behind the vehicle on the 0’ viewing angle of
jitter-free LCD display.
• 7 stage audible warning zones.
• 3 levels of adjustable volume.
• Can start audible warning from 1.7m
• Corner sensors can start audible warning from
1m
• Minimum blind area with 4 superior sensors.
• Waterproof sensors and sockets.
• Reliable working temperature between -35˚C
and +80˚C
• Self diagnostic function shows the faulty
sensor on the display and gives audio
warning then bypassses the faulty sensor and
continues to work with the rest of the sensors.
Transport Support
19
Products
Reversing Aids
Ultrasonic Reverse Radar
Our latest range of reversing sensor systems.
Illuminated LCD 6 sensor, front & rear parking
system.
This system is designed to help avoid collisions
when the vehicle is reversing.
Automatically activates when the vehicle is put
into reverse
Detects objects behind vehicle up to 2.5mtrs
Shows range and position in meters to obstacle
Audible tones signal range to obstacle
Ideal for vehicles manoeuvring in confined areas
or close pedestrians
Technical:
• Working voltage: 10 - 28v
• Max Power: 5W
• Max display distance:
Rear 0.22 ~ 2.5m Front 0.15 ~ 0.30m
Rear: 0~1.7m Front: 0~0.30m
• Min display distance: 15cm
• Alarm Volume: mute ~ 70db & 90db
• Working Temperature: -35˚C ~ +80˚C
Packing Details:
• 2 x ECU (1 for front, 1 for rear)
• 1 x Alarm Unit (Digital LCD display c/w built in
buzzer & cable
• 6 x Ultrasonic waterproof paintable sensors
with cable & waterproof connectors (4 with
connectors)
• Accessories; User Manual, double sided
adhesive pad, connectors & drill bit.
• Warranty Card
20
Transport Support
Features:
• 2 front, 4 rear, total of 6 sensors
• Both rear and front sensors will work together
and will avoid colisions even in narrow parking
spaces.
• The only system in the world capable of
15cm detection in front sensors whoich start
from 30cm for warning to avoid unnecessary
warnings from the corners.
• Will indicate the front and rear obstacles
distance at the same time on disply unit.
• User friendly software will warn the driver of
the nearest obstacle.
• Rear sensors will start detection from 2m
• Front sensors can detect obstacles between
0.3m ~ 0.15m
• Will indicate an obstacle at front from 15cm
and rear from 22 cm.
• Will indicate the location of the obstacle either
at front or rear on its antireflective display
unit.
• 7 stage audible warning zones.
• 3 levels of adjustable volume (low, high and
mute).
• Middle sensors can start audible warning from
1.7m
• Corner sensors can start audible warning from
1m
• Minimum blind area with 6 superior sensors.
• Waterproof sensors and sockets.
• Reliable working temperature between -35˚C
and +80˚C
• Self diagnostic function shows the faulty
sensor on the display and gives audio
warning then bypassses the faulty sensor and
continues to work with the rest of the sensors.
Products
CB Radios
Maycom EM-27
This has to be one of the most technically
advanced and professionally designed mobile
transceivers imported by Sharman‘s. Its features
include multifunction LCD display, 7 memory
buttons which also access other functions like
Scan, Dual Watch, Last Channel Recall, and many
other features too numerous to mention.
Features:
Frequency & Channel Display, Large LCD Multi-function Display, 6 user defined functions on
microphone, Last Channel Recall, 7 Programmable Memory Channels, Automatic 12 / 24 V Switch,
Beep On/Off Selection, Adjustable Squelch, S-Meter, Full Channel or Memory Channel Scanning, Dual
Watch, Key Lock, Rotary Channel Selector, External S-Meter Socket, External Speaker Socket, Up /
Down Microphone with Signal Key, Direct Display of Supplied Voltage
Team RoadCom
The Team RoadCom, with its 12 / 24 V automatic
switching supply, can be used in trucks and cars
without the need of additional transformers. The
unit includes two different mounting kits, a U-type
bracket kit for underdash mounting and a DIN
radio compartment kit.
Beside the standard features, like channel scanning, squelch and dual watch the RoadCom has a
Last-Channel-Recall key, this function stores the last- used channel and recalls on demand. Also, there
are 4 programmable memory channels available for often used frequencies. To distract the driver as
little as possible the RoadCom posesses the VOX feature. All activated functions as well as the actual
channel number and the frequency are shown LC display, which can be switched by the user between
iceblue and orange.
Features:
LC Display Switchable Iceblue / Orange, Built-In VOX Function, On / Off, Last Channel Recall, Back-Up
Function, 4 Memory Channels, Automatic 12 / 24 V Switch, AM-FM Switch, Receipt Tone Switch,
Automatic & adjustable Squelch, S-Meter, Channel Scanning, Dual Watch, Priority Channel 9, Key Lock,
Rotary Channel Selector, External S-Meter Socket, External Speaker Socket, Up / Down Microphone
with Signal Key
Connection : Microphone 6-Pin
Dimensions : 188 x 56 x 150 mm
Weight : 740 gr.
Transport Support
21
Products
CB Radios
Intek M-790 Plus 80 Channel CB
A new 80 Channel CB radio, featuring a unique
speech processor, designed to dramatically
improve your RX/TX audio. Also includes quick up
and down keys, Auto Scan,and complete with a
high quality dynamic microphone. Has 10 Band
programmable feature for European use.
Features:
ESP Speech Processor, LCD Display, Channel Scan, Digital Readout, Priority Channel Key 9, Dual Watch,
Volume and Squelch Control, Last Channel Recall, Up/Down Microphone
TTI TCB-770 Mobile CB Radio (Multi-Standard)
The TTI TCB-770 is a Dual-mode AM/FM
transmitter-receiver with over 400 channels
allowing you to use it all throughout Europe.
Simply choose the country you are in when you
switch the unit on and you will be able to use the
CB legally in that country (with appropriate
licence). Ideal for long distance drivers.
Features:
Multi-function display with back light, Microphone with up/down buttons, External S meter socket,
Quick up/down channel selector and scanning, Emergency button, Mic gain control, RF gain control,
External speaker socket, Power: 13.8V DC
22
Transport Support
Products
CB Radios
Midland 38 Plus 80CH Mobile CB Transceiver
A compact easy-to-use budget priced 80 channel
UK and EU band mobile CB radio with band
selection switch in the microphone, and a large
easy to read LCD channel indicator. Latest
version also incorporates 12/24V auto sensing
input power.
The Midland 48+ Multi
The Midland 48+ Multi is a multi channel radio
allowing you to use it all throughout Europe.
Simply choose the country you are in when you
switch the unit on and you will be able to use the
CB legally in that country(with appropriate
licence). Ideal for long distance drivers.
Transport Support
23
Products
CB Antennas, Mounts and Accessories
Springer
The most popular, high profile, rugged CB antenna
available on the market; base loaded heavy duty
open coil design with good quality tapered whip
gives this antenna that extra flexibility that truckers require from an antenna.
Available in Chrome, Black, Blue, White, Green,
Yellow and Red
Technical Specifications:
Type of Antenna
1/4 wave reduced
Frequency
26-28 MHz
Length
1.55m
S.W.R.
< 1.3:1
Power Rating
Max.
1000 watts
Mounting
3/8” x 24 thread
Mini Springer Mobile CB Antenna (BLACK) (other colors available on request)
Technical Specifications:
Type of Antenna
1/4 wave reduced
Frequency
26-28 MHz
Length
0.89m
S.W.R.
< 1:1.5
Power Rating
Max.
1000 watts
Mounting
3/8” x 24 thread
24
Transport Support
Products
TS Automatic Timer Switch (TSATS)
The TS ATS is a 24v fully automatic timing switch
(dry contacts) with battery back up specially
designed for automatic switching applications on
trucks and mobile plant. This units primary
function was to automatically mute the reverse
sounder on vehicles working in residential areas
between 11pm and 7am to prevent noise
pollution.
The unit has any number of possible uses...
Switching of..
Specification
•
•
•
•
•
•
Dimensions:
95mm x 55mm x 35mm
Operating Voltage:
24v (12v Available on request)
Timer:
AM/PM or 24 hr
Battery Back Up (up to 4 days)
Can be set to switch on/off for anytime of day, 24 hr 7 days week
Can be set to switch on/off everyday or just on particular days.
Override function.
Summertime function (+1hr)
Dry switching contacts.
Can switch up to 240v, 5A
Built in Safety Fuse which can be change to suit switched load.
Night Heaters
Sounders/Sirens
Work/Access Light
Beacons
Auto Sheeting
Locking Devices/Security/Immobiliser
We can also offer various other options.
See below.
Options:
•
•
•
•
Alternative supply voltage
Various Switching Option
Multi event switching
Various timed switching options
Installation is very simple; the unit can mounted anywhere in the cab, for example, under the fuse
box cover. There are two wires (+/-) which go to the permanent battery supply on the vehicle and two
wires for the switching contact.
Please contact us with any bespoke requirements.
Transport Support
25
Products
The TS Body Up Indicator
Features:
Simple, easily installed, and more importantly
conforms to the legal requirements for tipper
vehicles.
It is a legal requirement to fit a visible warning
device to vehicles with high level (over 3 meters)
power operated equipment to alert the driver if
the equipment exceeds a certain height.
• 12v or 24v Operation
• Available for Articulated or Rigid Vehicles*
• Supplied as a standalone unit or as an
integrated part of TS Complete Vehicle Safety
System
• Fully sealed waterproof housing
• The simplest body up indicator to fit on the
market.
• Supplied with comprehensive instructions and
all required fixings.
• Indicator lamp and/or buzzer for rigid vehicles
• Highly durable flexible rubber indicator lamp
for articulated vehicles.
• Legal Requirement!
Rigid Body Up Indicator
Simple, easily installed, and more importantly
conforms to the legal requirements for tipper
vehicles.
It is a legal requirement to fit a visible warning
device to vehicles with high level (over 3 meters)
power operated equipment to alert the driver if
the equipment exceeds a certain height.
26
Transport Support
Features:
• 12v or 24v Operation
• Supplied as a standalone unit or as an
integrated part of the TS Complete Vehicle
Safety System
• Fully sealed external components
• Flashing red LED or buzzer
• Legal Requirement
Products
Warning Beacons
Rotating Mini Light Bar
TS TWIN ROTATING MINI AMBER LIGHT BAR
Highly visible and easily installed.
Features:
• Dual Voltage 12V and 24V Operation.
• Through hole permanent fixing via 4 bolt fixing
points.
• Reverse polarity protection
• IP56 rated
• -30˚C to +50˚C temperature range
• Size: H 188mm x L 550mm x W 230mm
Aerolite Series Amber Light Bars
1000 Series (Length: 1m)
Available in combinations of the following:
•
•
•
•
2 or 4 Module
Rotating or Xenon Strobe
12 or 24v
With or without illuminated sign
1250 Series (Length 1.25m)
1500 Series (1.5m)
Transport Support
27
Products
Xenon Beacons
1
2
3
4
5
6
7
PIC.
PART NO.
DESCRIPTION
OPERATING VOLTAGE
OUTPUT
1&2
AVXCB1611H/H
LOW PROFILE XENON
12v - 110v
5w
3
AVXCB105
SURFACE MT XENON
12v - 110v
5w
4
AVXCBNV1611
HEAVY DUTY XENON
12v - 110v
5w
Insert
AVXCBNV-1611GUARD METAL CAGE
-
-
5
AVXCB5450
HEAVY DUTY XENON
12v - 110v
5w
6
AVXCB5434
HIGH PROFILE XENON
12v - 110v
5w
7
AVXCBNV2111
FORK TRUCK TYPE XENON
12v - 110v
5w
PIC.
LENS
HEIGHT
BASE
FIXING
FLASH RATE
1&2
AMBER -POLYCARBONATE
64mm
133mm dia
3 BOLT
65/min
3
AMBER -POLYCARBONATE
67mm
139 x 58mm
2 BOLT
65/min
4
AMBER -POLYCARBONATE
95mm
127mm dia
3 BOLT
65/min
Insert
-
11.4mm
13.2mm dia
3 BOLT
-
5
AMBER -POLYCARBONATE
114mm
127mm dia
3 BOLT
65/min
6
AMBER -POLYCARBONATE
146mm
133mm dia
3 BOLT
65/min
7
AMBER -POLYCARBONATE
133mm
98 x 71mm
2 BOLT
65/min
28
Transport Support
Products
Hands Free Kits
Introducing the Pama Sigma Bluetooth Sun Visor
Handsfree, this is the next generation in
transportable bluetooth handsfree systems.
This stylish handsfree boasts the following features :• Caller Number Display
• 5 Languages Supported (English, German,
Italian, Spanish & French)
• Callers Number Voice Announcement in
Language selected
• Voice Dialling Supported
• Sun Visor Mounting Bracket
• Swivel Microphone positioning for optimal
clarity
• Can be mounted either way up as display
readout can be inverted
• Call transfer
• 20 Call Unit Memory
•
•
•
•
•
•
•
•
•
Microphone Mute Facility
Unit Volume Control buttons
Charging status LED indicator
Bluetooth V 1.2 compliance
Supports both Headset & Handsfree profiles
6 hour talktime and 130 hour standby times
10m operational range
Firmware Upgrade Connection Socket
Can be paired with up to 4 devices (will only
work with one device at a time)
• Low battery warning indicator on LCD display
• Sun Visor Mounting Bracket
Pama Beta Sun Visor Bluetooth Handsfree system with Caller Number Display
This stylish in car kit is the latest ‘plug and play’
handsfree kit. With clear caller display you’ll know
who is calling before you answer and with
superb audio you need never miss a call again.
This small, portable device clips conveniently onto
the sun visor in your car and once paired to a
Bluetooth device provides a safe handsfree
system.
Caller number display, D.S.P. Digital Signal Processor for enhanced call audio quality, Bluetooth
compatible (voice), Talk time 10 hours/200 hours standby, Echo cancellation, Noise suppression, No
wires, no installation required, Range 10 metres, High quality audio.
Transport Support
29
Products
Via Michelin Navigation X-960
Powerful Navigation to suit your pocket
Plug and Drive: Switch it on and off you go!
Touch screen navigation at your fingertips
Simple, ergonomic menu
2D and 3D viewing options
Smart Keyboard
Alter the content of your navigation device!
Regular content updates available to download
from ViaMichelin.com
Via Michelin Navigation X-970T
Super Smart Navigation
Touch screen and ergonomic menu
Clear sounds and vocal instructions
Efficient, enhanced navigation
2D and 3D viewing options and accurate mapping
Multi-criteria search options including price,
category, Michelin rating, etc.
Design to incorporate new functionality as they
are introduced
Via Michelin Navigation X-980T
More than just Navigation
Large 4.3 inch screen
Double display with zoom on the next junction
Multi-function audio base with 3 watt loudspeaker
Hands-free phone function
Text to speech relaying of street names, road
signs and traffic alerts
Real-time traffic information with warnings about
traffic conditions and an alternative route offered
Fixed speed cameras integrated for France and
Belgium and available in downloading for the
other European countries
30
Transport Support
Products
Bespoke Safety Systems
Transport Support specialize in bespoke safety devices for the Transport and Quarrying industries.
Working closely with some of the UK’s leading aggregate producers, we have developed a number of
specialised versions of the TS Inclinometer. Transport Support has also developed safety systems for
plant and machinery used in quarrying and waste management.
Our design and development projects include:
Mobile and fixed installation CCTV, Safety Interlocks, Collision Avoidance, GPS Tracking, Spoken Voice
Warning Devices, Proximity Detection, Load Scanning, Invisible Boundary Markers
CAT 740 Hook loader
used in landfill
operations. Fitted with
specially developed TS
stability system.
Telehandler fitted with
specially developed
stability system, overhead
power line detector, data
logger and GPS tracking
device.
Collision Avoidance Systems
Transport accounts for 40% of all accidents in quarries and 60% of all deaths. It has been a priority
for HSE for many years but until the industry addresses safe vehicle, safe workplace, competent driver
and supervision it will not improve.
Transport Support has developed a number of collision avoidance systems to counteract this problem.
These are mainly fitted to large quarrying and mining vehicles such as the Caterpillar 740 and Volvo
A40 (but can also be used with road going vehicles)
Our Collision Avoidance systems can be used to aid in vehicle maneuvering, to prevent vehicles entering dangerous areas, create invisible boundaries, and track vehicle movements.
Technologies include…
Infrared and laser, Doppler Rader, Ultrasonic, GPS, RF Data Communications.
Systems can be supplied as standalone units or can be integrated with our existing range of vehicle
safety products.
We are pleased to offer full onsite surveys in order to determine specific customer requirements.
Transport Support
31
Transport Support
A division of G.N.Systems Ltd.
Units 10-12,
Undershore Business Park,
Brookside Road, Crompton Way,
Bolton,
BL2 2SE,
United Kingdom
T: +44 (0)1204 368 111
F: +44 (0)1204 368 112
www.transportsupport.co.uk
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement