advertisement
EOC2611P
Long Range Wireless Access Point / Client Bridge
• 2.4GHz
• 108Mbps
• 802.11 b/g/Super G
• MSSID, WDS
PRODUCT DESCRIPTION
EOC2611P is a long range outdoor wireless Access Point / Client Bridge that operates seamlessly in the 2.4GHz frequency spectrum and provides high bandwidth up to 108Mbps with
Super G. With dual polarization antenna, it features high transmitted output power and high receivable sensitivity. High output power and high sensitivity can extend range and coverage to reduce the roaming between Access Points to get a more stable wireless connection. It also reduces the expense of equipment in the same environment. With IPx4 protection, it can provide effective in keeping out water.
It supports distance control by 1km to 30km and RSSI indicator which enables the best transmit and receive signals for traffic communication. This product comes with PoE injector for building in outdoor environment easily.
To protect your wireless connectivity, it can encrypt all wireless transmissions through 64/128-bit
WEP data encryption and also supports WPA/WPA2. The MAC address filter lets you select exactly which stations should have access to your network. In addition, the User Isolation function can protect the private network between client users.
The attractive design, high performance, and array of features make EOC2611P a suitable wireless solution for your residence or office.
EOC2611P Datasheet Version 190811
*Theoretical wireless signal rate based on IEEE standard of 802.11 b, g chipset used. Actual throughput may vary.Network conditions and environmental
factors lower actual throughput rate.
** All specifications are subject to change without notice
Learn more about EnGenius Solutions at http://www.engeniustech.com.au/
BUSINESS CLASS
EOC2611P
Datasheet
EOC2611P
FEATURES
Wireless
- 2.4GHz It works in 2.4GHz frequency spectrum
- High output power Transmit high output power programmable for different country selections
- High Data Rate High speed transmitting rate up to 108Mbps with Super G, support large payload such as MPEG video streaming
- Multifunction application Access Point/Client Bridge/Client Router/WDS Function
- Long range transmitting Transmit power control and distance control (ACK timeout)
- Narrow Bandwidth Provide 5MHz/10MHz/20MHz bandwidth selection
- Signal Strength Display RF signal strength status shown LEDs of 3 colors, making network build-up easier. LED indicators have the best transmit and receive signal for traffic communication
- Multiple SSID 4 SSID supported. Each SSID can set itself wireless or WAN access setting.
QoS(WMM) Enhance performance and density
Networking
- PPPoE Point-to-Point Protocol over Ethernet at Client Router mode. This function will keep trying when failed or disconnected
-
PPTP
Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks
- VPN Pass Through
Security
- 802.11i WEP, WPA, WPA2 (Encryption support TKIP/AES)
- MAC address functions MAC address filter (AP mode)
- 802.1x IEEE802.1x Authenticator
- Station isolation L2 Isolation
Management
-
Firmware Upgrade
Upgrading firmware via web browser, setting are reserved after upgrade
- Reset & Backup Reset to factory default. User can export all setting into a file via WEB
-
Ping & Trace Route
Built-in PING function & Trace Route function in Web GUI
- MIB MIB I, MIB II(RFC1213) and Private MIB
-
SNMP
V1, V2c
EOC2611P Datasheet Version 190811
*Theoretical wireless signal rate based on IEEE standard of 802.11 a, b, g, n chipset used. Actual throughput may vary.Network conditions and environmental
factors lower actual throughput rate.
** All specifications are subject to change without notice
Learn more about EnGenius Solutions at http://www.engeniustech.com.au/
BUSINESS CLASS
EOC2611P
Datasheet
EOC2611P
> Hardware Specification
MCU/RF
TECHNICAL SPECIFICATION
Atheros AR2316 Single Chip
Flash 8MB
Physical Interface
LED indicators
Power Requirements
One 10/100 Fast Ethernet RJ-45
One Reset Button
One SMA Connector
One switch (external and internal antenna switching)
Power/ Status
LAN (10/100Mbps)
WLAN (Wireless is up)
3 x Link Quality (Client Bridge mode) y Green: Good Quality y Yellow: Marginally Acceptable Quality y Red: Bad Quality
Active Ethernet (Power over Ethernet) Proprietary PoE design
Power Adapter 24V / 0.6A DC
FCC Part 15C/15B, EN 300 328, EN 301 489-1/-17, EN60950 Regulation Certifications
> RF Specification
Frequency Band
Modulation Technology
Operating Channels
802.11b/g
2.412~2.472GHz
OFDM = BPSK, QPSK, 16-QAM, 64-QAM
DSSS = DBPSK, DQPSK, CCK
802.11b/g
11 for North America, 14 for Japan, 13 for Europe
Receive Sensitivity (Typical)
802.11g
-92 dBm @ 6Mbps
-74 dBm @ 54Mbp
802.11b
-97 dBm @ 1Mbps
-89 dBm @ 11Mbps
Available transmit power (Average power)
FCC ETSI
Frequency Power Frequency Power
2.412~2.462
GHz
IEEE802.11g
28dBm@6~24Mbps
26dBm@36Mbps
24dBm@48Mbps
23dBm@54Mbps
2.412~2.472
GHz
IEEE802.11g
28dBm@6~24Mbps
26dBm@36Mbps
24dBm@48Mbps
23dBm@54Mbps
2.412~2.462
GHz
IEEE802.11b
28dBm@1~11Mbps
2.412~2.472
GHz
IEEE802.11b
28dBm@1~11Mbps
EOC2611P Datasheet Version 190811
*Theoretical wireless signal rate based on IEEE standard of 802.11 a, b, g, n chipset used. Actual throughput may vary.Network conditions and environmental
factors lower actual throughput rate.
** All specifications are subject to change without notice
BUSINESS CLASS
EOC2611P
Learn more about EnGenius Solutions at http://www.engeniustech.com.au/
Internal Antenna
Antenna Radiation Pattern
Datasheet
EOC2611P
Antenna Specification
Gain 10dBi
Radiation Directional
Frequency Band Range
Horizontal -3dB Bandwidth
Vertical -3dB Bandwidth
2.4-2.5GHz
70 o
35 o
External Antenna 1* SMA connector
SOFTWARE FEATURES
> General
Topology Infrastructure
Protocol / Standard IEEE 802.3 (Ethernet)
IEEE 802.3u (Fast Ethernet)
IEEE 802.11b/g (2.4GHz WLAN)
Operation Mode
802.11 b/g
Access Point
Client Bridge
Client Router
WDS AP/CB
VPN
DHCP Client
VPN – pass through
EOC2611P Datasheet Version 190811
*Theoretical wireless signal rate based on IEEE standard of 802.11 a, b, g, n chipset used. Actual throughput may vary. Network conditions and environmental
factors lower actual throughput rate.
Learn more about EnGenius Solutions at http://www.engeniustech.com.au/
BUSINESS CLASS
EOC2611P
Wireless
Channel Selection (Setting varies by countries)
Transmission Rate
11 b/g:54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbps
Super G : 108 Mbps
Long distance transmission : 1km to 30km
Transmit power table
Signal Strength indication using LEDs
PPPoE (CR mode) and PPTP
Narrow Bandwidth 5MHz/10MHz/20MHz Support
PING function and Trace Route function
MSSID Support
VLAN Support
Security
WEP Encryption-64/128/152 bit
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1x Authenticator
Hide SSID in beacons
MAC address filtering, up to 50 field
Wireless STA (Client) connected list
QoS WMM
> Management
Datasheet
EOC2611P
Firmware Upgrade
Administrator Setting
Reset Setting
System monitoring
- Upgrade firmware via web-browser
- Keep latest setting when f/w update
Administrator password change
- Reboot (Press 1 second)
- Reset to Factory Default (Press 5 seconds)
Status, Event Log
MIB
Backup & Restore
Time setting
MIB I, MIB II (RFC1213) and Private MIB
Settings through Web
NTP (Auto-setting of time)
Time setting manually
EOC2611P Datasheet Version 190811
*Theoretical wireless signal rate based on IEEE standard of 802.11 a, b, g, n chipset used. Actual throughput may vary. Network conditions and environmental
factors lower actual throughput rate.
Learn more about EnGenius Solutions at http://www.engeniustech.com.au/
BUSINESS CLASS
EOC2611P
ENVIRONMENTAL AND MECHANICAL
Temperature Range Operating -20°C~70°C
Storage -30°C to 80°C
Humidity (non-condensing)
Dimensions
0%~90% typical
260mm (L) x 84mm (W) x 55mm (H)
Weight 380g
Access Point + Client Bridge scenario
APPLICATION
Datasheet
EOC2611P
Long Range transmitting
EOC2611P Datasheet Version 190811
*Theoretical wireless signal rate based on IEEE standard of 802.11 a, b, g, n chipset used. Actual throughput may vary. Network conditions and environmental
factors lower actual throughput rate.
Learn more about EnGenius Solutions at http://www.engeniustech.com.au/
BUSINESS CLASS
EOC2611P
Front Rear
Standard Mounting Kits
Pole Mount
PACKAGE CONTENT
►
1 x 802.11b/g Long range AP/CB (EOC2611P)
►
1 x PoE Injector (EPE-1212)
►
1 x Power Adaptor
►
1 x CD with User’s Manual
►
1 x QIG
►
1 x Metal strap
►
1 x Special screw set
Contact
E-mail: [email protected]
1300 725 323
1/14 Wellington Street, ACACIA RIDGE QLD 4110 Australia
Check www.engeniustech.com.au for your contact information
EOC2611P Datasheet Version 190811
*Theoretical wireless signal rate based on IEEE standard of 802.11 a, b, g, n chipset used. Actual throughput may vary. Network conditions and environmental
factors lower actual throughput rate.
Learn more about EnGenius Solutions at http://www.engeniustech.com.au/
Datasheet
EOC2611P
IP65 Standard
BUSINESS CLASS
EOC2611P
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project