PD62GB10_11_Digital multimeters and power

PD62GB10_11_Digital multimeters and power
Digital
multimeters and
power analyzers
series
100% electricity
DIGITAL MULTIMETERS AND POWER ANALYZERS
with backlight graphic
LCD screen
For the control of energy distribution systems detecting when
problems occur that could put the quality and availability of electricity
at risk. The wide range of power supply and measurement, high
measurement accuracy of electrical parameters and comprehensive
expandability make these products unique to the market.
Easy and intuitive menu navigation
Graphic display with text in 5 languages
Expandability
Ethernet, USB, RS232, RS485 and Fieldbus connection
High measurement accuracy
Wide range for power supply, measurements and temperature
Suitable for LV, MV and HV electric systems and installations
VERSATILITY, EXPANDABILITY AND HIGH MEASUREMENT QUALITY
Digital multimeters
MAIN FEATURES
Modular version, 4-modulie
Digital multimeters
DMG 200
DMG 210
DMG 300
•
•
•
DMG 700
DMG 800
DMG 900
•
•
•
Flush-mount version, 96x96mm
DIN rail fixing version, rear mount
•
•
•
Graphic 4-key LCD, 128x80 pixels
•
•
•
•
•
•
Expandability
•
•
•
•
•
•
Integrated RS485 interface
THD (Total Harmonic Distortion) measurement
DMG 900T
Transducer
•
Graphic touch-screen LCD, 128x112 pixels
Number of measured electrical parameters
Digital power analyzers
>160
>160
>344
>160
>344
>590
>590
•
•
•
•
•
•
•
•
•
•
•
Detail harmonic analysis
Certifications obtained: GOST, cULus.
Comply with standards: IEC/EN61010-1, IEC/EN61000-6-2, IEC/EN61000-6-3, UL 508, CSA C.22.2 n° 14.
Modular digital multimeters
Wide range of operation
Optic interface
Compact housing
• Auxiliary power supply: 100-240VAC/110-250VDC
• Maximum measured rated voltage: 690VAC L-L
(600VAC UL/CSA rating)
• Input current: 5A (also 1A for DMG 300 only)
• Voltage measurement range: 20-830VAC L-L
• Current measurement range: 0.01-6A
• Frequency measurement range: 45-66Hz.
The DMG 300 interface with the expansion
modules is made by infrared beam.
Special connectors provide for a solid and
secure fixing of expansion modules.
The multimeter housing is made to DIN standards.
The width is just 4 modules.
Accuracy
DMG 200 and DMG 210
• Voltage: ± 0.5% (50-830VAC)
• Current: ± 0.5% (0.1-1.2 In)
• Power: ± 1%
• Active energy: Class 1 (IEC/EN 62053-21)
• Reactive energy: Class 2 (IEC/EN 62053-23).
DMG 300
• Voltage: ± 0.2% (50-830VAC)
• Current: ± 0.2% (0.1-1.2 In)
• Power: ± 0.5%
• Active energy: Class 0.5S (IEC/EN 62053-21)
• Reactive energy: Class 2 (IEC/EN 62053-23).
71.6mm
DIGITAL MULTIMETER
4 module size
USB connection
Maximum of 3 expansion
modules
The PC for programming and
data download takes place in a fast and
easy way using the USB port, available on
the EXM 10 10 expansion module.
Up to 3 EXM... expansion modules can
be fitted on a DMG 300 and permit to:
• Communicate
• Control alarms, pulses and tariffs
• Store events with time stamp.
Ethernet connection
The EXM 10 13 expansion module allows
the DMG 300 multimeter to be connected
in a common Ethernet network and viewed
by one or more duly-connected system
computers.
DMG 200: More than 160 measured electrical parameters.
DMG 210: More than 160 measured electrical parameters, with RS485 interface
DMG 300: More than 344 measured electrical parameters, expandable.
Wiring diagrams
Expansion modules for DMG 300
CT1
CT2
CT3
L
O
A
D
N
The DMG 300 multimeter can integrate its functions with the use of the following modules:
• Digital inputs and outputs, static and relay type
• USB, RS232, RS485 and Ethernet interface communications
• Data storage with clock calendar (RTC) for events.
110...250VDC
100...240VAC
A1 A2 GND
V1 V2 V3VN
AUX SUPPLY
VOLTAGE
S1 S2
I1
S1 S2
I2
S1 S2
I3
MAX
3
CURRENT
Type of connections:
• Single-phase
• Two-phase
• Three-phase with or without neutral
• Three-phase without neutral, ARON connection
• Balanced three-phase, with or without neutral.
K
CLIC
Flush-mount expandable digital m
.
Wide range of operation
Accuracy
• Auxiliary power supply: 100-40VAC/110-250VDC
• Maximum measured rated voltage: 690VAC L-L (600VAC UL/CSA rating)
• Input current with CT: 5A only for DMG 700; 5A or 1A for
DMG 800/900/900T
• Voltage measurement range: 20...830V L-L; 10...480V L-N
• Current measurement range for 5A full scale: 0.01-6A for
DMG 700/800; 0.01-10A for DMG 900/900T
• Current measurement range for 1A full scale: 0.01-1.2A
• Frequency measurement range: 45-66Hz for all type;
also 360-440Hz for DMG 900/900T.
DMG 700
• Voltage: ± 0.5% (50÷830VAC)
• Current: ± 0.5% (0.1-1.2 In)
• Power: ± 1%
• Active energy: Class 1 (IEC/EN 62053-21)
• Reactive energy: Class 2 (IEC/EN 62053-23).
DMG 800, DMG 900 and DMG 900T
• Voltage: ± 0.2% (50÷830VAC)
• Current: ± 0.2% (0.1-1.2 In)
• Power: ± 0.5%
• Active energy: Class 0.5S (IEC/EN 62053-21)
• Reactive energy: Class 2 (IEC/EN 62053-23).
DC version
DMG 800/900/900T models are also available with
12-24-48VDC.
Wide range of voltage measurement
20…830VAC L-L
Multiple energy metering with tariff function
The wide measurement range of voltage inputs allows
DMG multimeters to be used in an infinite number of
applications.
More than 20 partial energy meters, clearable.
DIGITAL MULTIMETER
DIGITAL POWER ANALYZER
96x96mm
IP54
96x96mm
IP65
TO
DMG 700: More than 160 measured electrical parameters, expandable.
DMG 800: More than 344 measured electrical parameters, expandable.
DMG 900: More than 590 measured
electrical parameters, expandable.
Expansion modules
These DMGs can increase their features with
the use of the following expansion modules
and satisfy the many diverse needs of
Customers. They include:
• Digital inputs and outputs, static and
relay type
• Analog inputs and outputs
• USB, RS232, RS485, Ethernet and
Profibus-DP interface communications
• Data storage with clock calendar
(RTC) for events and data logging
• Data storage with clock calendar
(RTC) for events, data logging with Energy
Quality.
SCREEN
CH
PP!!
BEEEE
U
High expandability
Multifunction analog inputs
and outputs
Storage module with
clock calendar
The programmable analog outputs can
be configured in voltage or current.
The analog inputs can read signals in the
form of voltage, current or temperature
from PT100 sensor.
It provides for data
logging of the measurement trends
and storing events and alarms with
time stamp.
Ethernet gateway function
It allows to read data from a group of
DMGs connected together in a RS485
network, using one Ethernet port.
Energy Quality (EN 50160)
module
It permits to control the energy quality
to EN 50160 normative, storing events
(micro breakings, voltage dips, etc.)
with time stamp.
The EXP expansion modules are common to
all the flush-mount models and transducer.
The fitting on the multimeters is done with
no need of tools and the connection is made
with plug connectors.
MAX
4
K
CLIC
multimeters and power analyzers
Front panel mounting ease
Low-profile
housing
The mounting on and removal from the panel door are done
with no need of tools. A special fixing system provides a
quick and immediate operation during both device
installation and removal from the panel front.
DMG 700, DMG 800 and DMG 900 types are only 60mm deep
(61.5mm with the terminals covers in place.) With the
expansion modules mounted, this becomes 80mm.
61.5mm
Programmable alarms with
Boolean logic
Safety
80mm
Being equipped with sealable
switches, the models can have
set-up and clearing locks.
To avoid connection tampering,
sealable terminal covers are also
included.
Temperature detection
The analog input provides for the temperature measurement
by sensors, e.g. PT100.
MEASUREMENT TRANSDUCER
REMOTE DISPLAY UNIT
96x96mm
IP65
PP!!
BEEEE
Wiring diagrams
CT1
CT1
CT2
CT3
L
O
A
D
L
O
A
D
CT2
CT3
CT4
N
N
12-24-48VDC
110...250VDC
100...440VAC
Five voltage and four
current inputs
12-24-48VDC
110...250VDC
100...440VAC
V1 V2 V3VN
AUX SUPPLY
VOLTAGE
CH S REEN
C
DMG 900 - DMG 900T
DMG 700 - DMG 800
A1 A2 GND
OU
T
DMG 900RD: Remote terminal for
viewing electrical parameters
measured by the DMG 900T
transducer.
DMG 900T: More than 590 measured electrical parameters
expandable, DIN rail fixing.
S1 S2
I1
S1 S2
I2
S1 S2
I3
CURRENT
Type of connections:
• Single-phase
• Two-phase
• Three-phase with or without neutral
• Three-phase without neutral, ARON connection
• Balanced three-phase, with or without neutral.
A1 A2 GND
AUX SUPPLY
V1 V2 V3 V4 VN
VOLTAGE
S1 S2
I1
S1 S2
I2
S1 S2
I3
S1 S2
I4
CURRENT
Type of connections:
• Single-phase
• Two-phase
• Two-phase with neutral,
measurement of neutral
current and neutral-earth voltage
• Three-phase with or without
neutral
• Three-phase without neutral,
ARON connection
• Balanced three-phase,
with or without neutral
• Three-phase with neutral,
measurements of neutral current
and neutral-earth voltage.
The DMG 900 and DMG 900T
types can also provide measurements of
neutral current and neutral-earth voltage.
Series
Communications
2 configurable password levels
The page with the measurements can be
freely consulted while the pages with
parameter settings and commands are
locked with 2 access levels:
- User
- Installer.
The DMG instruments provide for communications using the following interface:
Ethernet, USB, RS232, RS485 and Fieldbus (Modbus®, Profibus, etc.).
Wiring test
Page customising
The user can freely define by selecting information and measurements to view on the display.
• The wiring test allows to check if the
multimeter installation has been carried
out correctly.
Software
The new DMG series digital multimeters are compatible with
the DMK SW and DMK SW 10 remote control software,
already used with the DMK series multimeters.
DMK SW
The remote control software is capable of
supervising up to 250 digital multimeters
connected on one single bus.
DMK SW 10
It includes a data-logger
supervision software and the
DMK SW remote control software.
• The test permits to check the
following points:
Reading of the three voltages
Reading of the three currents
Phase sequence
Voltage imbalance
Polarity reversal of one or more CTs
Phase swap between voltage/current.
Graphic LCD screen
White backlight with intensity adjustment.
5-language texts facilitate:
Graphic symbology:
Measurement consultation
Function choice
Parameter setting
Various types of graphs:
Histograms for harmonics
Executing commands
Measurement range
Waveforms
Extensive temperature
range display
-20 +60°C
Measurement (consumption) trends
Acces status
Main parameters and measurement inputs
Digital multimeters
SINGLE, TWO, THREE-PHASE INSTRUMENTS
WITH OR WITHOUT NEUTRAL
Voltage (phase, phase-to-phase and system values)
Digital multimeters Power analyzers
DMG DMG DMG DMG DMG DMG DMG
200 210 300 700 800 900 900T
•
•
•
•
•
Neutral-earth voltage
Phase current values
•
•
•
•
•
Phase current values (actual neutral current)
Power Factor (PF)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Frequency
•
•
•
•
•
•
•
Maximum and minimum value function (HIGH / LOW)
for reading and storage of peak voltage, current, power,
PF and frequency values
•
•
•
•
•
•
•
Voltage and current asymmetry
•
•
•
•
•
•
•
Averaging function
•
•
•
•
•
•
•
Cos for each phase
Peak values (maximum demand) of power and current
•
•
•
•
•
•
•
Hour counter (programmable total and partial)
•
•
•
•
•
•
•
Total Harmonic Distortion (THD) of voltage and current values
•
•
•
•
•
•
•
Harmonic analysis of voltage and current up to 63° order
•
•
Direction of harmonic power flow
•
•
Harmonic analysis of voltage and current up to 31° order
Active, reactive, apparent, imported and exported energy
meters (partial and total)
•
•
•
Pulse counter for general use (pulse count for consumption
of water, gas, etc.., with expansion module only)
3ph+N voltage, 690VAC max
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
3ph+N+GND voltage, 690VAC max
Measurement inputs 3ph current, CT /5A
3ph current, CT /5A or /1A
•
•
•
3ph+N current, CT /5A or /1A
Event storage
Expandability
Digital multimeters
Digital multimeters Power analyzers
DMG DMG DMG DMG DMG DMG DMG
200 210 300 700 800 900 900T
3 optic modules maximum
•
4 plug-in modules maximum
•
•
•
•
•
•
•
•
•
•
•
•
RS232, RS485, USB communications
•
•
•
•
•
Ethernet communications
•
•
•
•
•
•
•
•
•
•
•
Digital inputs/outputs
Analog inputs/outputs
Profibus-DP communications
Data logger + clock calendar (RTC)
•
Energy Quality (EN 50160) analysis
RS485 built-in interface
•
•
HOW TO ORDER
MODULAR DIGITAL MULTIMETER
DMG 200
DMG 210
DMG 300
DMG 200
Graphic 128x80 pixel LCD multimeter, 100-240VAC / 110-250VDC,
multi language Italian, English, French, Spanish and Portughese
DMG 200 L01
Graphic 128x80 pixel LCD multimeter, 100-240VAC / 110-250VDC,
multi language English, German, Czech, Polish and Russian
DMG 210
Graphic 128x80 pixel LCD multimeter, RS485 port included,
100-240VAC / 110-250VDC, multi language Italian, English, French, Spanish and Portughese
DMG 210 L01
Graphic 128x80 pixel LCD multimeter, RS485 port included,
100-240VAC / 110-250VDC, multi language English, German, Czech, Polish and Russian
DMG 300
Graphic 128x80 pixel LCD multimeter, harmonic analysis, ezpandable,
100-240VAC / 110-250VDC, multi language Italian, English, French, Spanish and Portughese
DMG 300 L01
Graphic 128x80 pixel LCD multimeter, harmonic analysis, ezpandable,
100-240VAC / 110-250VDC, multi language English, German, Czech, Polish and Russian
Expansion modules for DMG 300...
EXM...
EXM 10 00
2 digital outputs and 2 static outputs, opto-isolated
EXM 10 01
2 opto-isolated digital inputs and 2 output relays rated 5A 250VAC
EXM 10 10
Opto-isolated USB interface
EXM 10 11
Opto-isolated RS232 interface
EXM 10 12
Opto-isolated RS485 interface
EXM 10 13
Opto-isolated Ethernet interface
EXM 10 20
Opto-isolated RS485 interface and 2 output relays rated 5A 250VAC
EXM 10 30
Data storage, clock-calendar (RTC) with backup battery for event logging
FLUSH-MOUNT DIGITAL MULTIMETERS AND POWER ANALYZERS
DMG 700 - DMG 800
DMG 700
Graphic 128x80 pixel LCD multimeter, 100-440VAC / 110-250VDC
multi language Italian, English, French, Spanish and Portughese
DMG 700 L01
Graphic 128x80 pixel LCD multimeter, 100-440VAC / 110-250VDC
multi language English, German, Czech, Polish and Russian
DMG 800
Graphic 128x80 pixel LCD multimeter, harmonic analysis,
100-440VAC / 110-250VDC, multi language Italian, English, French, Spanish and Portughese
DMG 800 L01
Graphic 128x80 pixel LCD multimeter, harmonic analysis,
100-440VAC / 110-250VDC, multi language English, German, Czech, Polish and Russian
DMG 800 D048
Graphic 128x80 pixel LCD multimeter, harmonic analysis, 12-24-48VDC
DMG 900
Graphic 128x112 pixel touch screen LCD multimeter, harmonic analysis
100-440VAC / 110-250VDC, multi language Italian, English, French, Spanish and Portughese
DMG 900 L01
Graphic 128x112 pixel touch screen LCD multimeter, harmonic analysis
100-440VAC / 110-250VDC, multi language English, German, Czech, Polish and Russian
DMG 900
DMG 900T
DMG 900 D048
Graphic 128x112 pixel touch screen LCD multimeter, harmonic analysis, 12-24-48VDC
DMG 900T
Measurement transducer, harmonic analysis, 4 V/I channels
100-440VAC / 110-250VDC, multi language Italian, English, French, Spanish and Portughese
DMG 900T L01
Measurement transducer, harmonic analysis, 4 V/I channels
100-440VAC / 110-250VDC, multi language English, German, Czech, Polish and Russian
DMG 900T D048
Measurement transducer, harmonic analysis, 4 V/I channels 12-24-48VDC
DMG 900RD
Graphic 128x112 pixel touch screen LCD remote display unit, with 3m
long connecting cable
Moduli di espansione per DMG 700, DMG 800, DMG 900 e DMG 900T
DMG 900RD
EXP...
EXP 10 00
4 digital opto-isolated inputs
EXP 10 01
4 digital opto-isolated outputs
EXP 10 02
2 digital inputs and 2 static outputs, opto-isolated
EXP 10 03
2 output relays rated 5A 250VAC
EXP 10 04
2 analog opto-isolated inputs, 0/4-20mA or 0-10V or 0...±5V for DMG 800/900/900T only
EXP 10 05
2 analog opto-isolated putputs, 0/4-20mA or 0-10V or 0...±5V for DMG 800/900/900T only
EXP 10 10
Opto-isolated USB interface
EXP 10 11
Opto-isolated RS232 interface
EXP 10 12
Opto-isolated RS485 interface
EXP 10 13
Opto-isolated Ethernet interface for DMG 800/900/900T only
EXP 10 14
Opto-isolated Profibus-DP interface for DMG 800/900/900T only
EXP 10 30
Data storage, clock-calendar (RTC), with back up battery for events and data logging,
for DMG 800/900/900T only
EXP 10 31
Data storage with Energy Quality (EN 50160), clock-calendar (RTC) with back up battery for
events and data logging, for DMG 900/900T only
SOFTWARE AND ACCESSORIES
4 PX1
DMK SW
Remote control software for PC - DMG 210/300/700/800/900/900T, complete with 51 C4
connecting cable
DMK SW 10
Data-logger software for DMG 300/800/900/900T, complete with 51 C2 connecting cable;
includes DMK SW software
51 C2
PC - multimeter RS232 connecting cable (1.8m)
51 C4
PC - 4 PX1 converter connecting cable (1.8m)
51 C5
Analog modem - multimeter RS232 connecting cable (1.8m)
51 C9
Analog modem - 4 PX1 converter connecting cable (1.8m)
4 PX1
RS232/RS485 converter drive 220-240VAC EXM 80 04
110-120VAC on request.
Sealable set of terminal covers for DMG 200, DMG 210 and DMG 300
LOVATO ELECTRIC S.P.A.
CONTROL SOLUTION FOR INDUSTRY
VIA DON E. MAZZA, 12 - 24020 GORLE (BERGAMO) ITALY
Present in over 100 countries
Tel. +39 035 4282111 Fax +39 035 4282200
E-mail: [email protected]
Sales department Tel. +39 035 4282354 - Fax +39 035 4282400
LOVATO Electric offices in the world
100% electricity
United Kingdom
Germany
Spain
Poland
LOVATO ELECTRIC LTD
Tel. +44 8458 110023
www.Lovato.co.uk
DELTEC LOVATO GmbH
Tel. +49 7237 1733
www.DeltecLovato.de
LOVATO ELECTRIC S.L.U.
Tel. +34 93 7812016
www.LovatoElectric.es
LOVATO ELECTRIC SP. Z O.O.
Tel. +48 71 7979010
www.LovatoElectric.pl
Czech Republic
USA
Canada
Mexico
LOVATO SPOL. S.R.O.
Tel. +420 226 203203
www.LovatoElectric.cz
LOVATO ELECTRIC INC
Tel. +1 757 545 4700
www.LovatoUsa.com
LOVATO ELECTRIC
CORPORATION
Tel. +1 450 681 9200
www.Lovato.ca
LOVATO ELECTRIC
DE MEXICO, S.A. DE C.V.
Tel. +52 555 3415662
www.LovatoElectric.com.mx
The products described in this publication are subject to be revised or improved at any moment. Catalogue descriptions and details, such as technical and operational data, drawings, diagrams and instructions, etc., do not have any contractual value.
In addition, products should be installed and used by qualified personnel and in compliance with the regulations in force for electrical systems in order to avoid damages and safety hazards.
Sin
www.LovatoElectric.com
PD62 GB 10 11
22
ce
19
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement