littil = big difference

littil = big difference
2016&17
littil = big difference
PRODUCT
CATALOGUE
CONTENTS
RECESSED DOWNLIGHTS
4 - 11
OPTIMA
6 - 11
9W and 12W
25W and 35W
Frosted 10W, 12W and 17W
REPLACEMENT LIGHTS
LAMBENT
GU10 Downlights
6-7
8-9
10 - 11
12 - 15
6 - 11
14 - 15
BULBS, CORN LIGHTS,
OYSTER & RETAIL DISPLAY
16 - 29
18 - 19
18 - 19
20 - 21
22 - 23
ARGO
Corn Lamp
30 - 37
VIVA
LUMINA
2.5W and 5W
Dimmable 7W, 9W and 12W
3W Candle
G24 Generation 2
TROFFERS
24 - 25
OSTRO
Oyster Light
26 - 27
ARRAY
Retail Display Light
28 - 29
LED Troffers
Air Return Troffer
32 - 33
34 - 45
POLAR
Panel Lights
36 - 37
TUBES
38 - 49
FORTIS
T8 LED Tubes
T8 LED Battens
T8 LED Battens & Diffusers
IP65 LED Battens & Diffusers
Tri-Proof Battens
40 - 41
42 - 43
44 - 45
46 - 47
48 - 49
FLOODLIGHTS
50 - 53
HIGHBAY
54 - 57
NIMMO
ZETTA
LED Floodlight Range 52 - 53
LED Highbay Range 56 - 57
SECTION
OPTIMA
9W and 12W
25W and 35W
Frosted 10W, 12W and 17W
RECESSED
DOWNLIGHTS
RECESSED DOWNLIGHTS
OPTIMA
9W/12W RECESSED
DOWNLIGHTS
FOR NEW HOME OR
RENOVATION INSTALLATIONS
APPLICATIONS
This recessed downlight delivers a warm white light conveniently
spread at 60°. It has a similar lighting effect compared to the
traditional quartz halogen downlight, hence it is suitable for all
home or commercial applications. This lamp helps achieve 6
Star efficiency standard requirements for lighting in homes and
residential buildings.
FEATURES & BENEFITS
• 110mm flange available for 90mm cut outs
• Available in 3000k &4000k
• Dimmable driver on leading/trailing edge dimmers
TRIM OPTIONS
Replacement
results in
6
>75%
Low operating
temperature
energy savings
< 55°C
DIMMABLE
driver
littil.com.au
9W
12W
RDLS-9D30-60WH
RDLS-12D30-60WH
DIMENSIONS
GENERAL
Model Number
Dimensions
Lighting category
Lifetime (L70)
90 x 90 mm (cut out 75mm)
Recessed Downlight
36,000 hrs
Warranty
3 years
Operating temperature
55°C
OPTICAL
Light output (Lumens)
665 - 720 Lm
750 - 800 Lm
LED Type
LED colour temperature
CREE
3000K or 4000K
Full beam angle
60°
Colour Rendering Index (CRI)
>80
IES
Picture beam profile
ELECTRICAL
Driver Model Numer
TKP-LD9A25C
TKP-LD12A30C
Driver specs
External driver
250mA
External driver
300mA
Voltage
Power factor
Dimming / dimming system
In: 220-240 VAC, 50/60 Hz
Out: 25-36 VDC. 250mA
>0.9
HPM, CLIPSAL, DETA & LITTIL
MECHANICAL
Cut-out diameter
Gimballed
75mm
No
OPTIONS
Lens
Body material finish
Flange
Mounting
Clear
White or silver
110mm, 140mm or 160mm available
Recessed
COMPLIANCE
7
RECESSED DOWNLIGHTS
OPTIMA
25W/35W RECESSED
DOWNLIGHTS
FOR NEW RETAIL OR
RENOVATION INSTALLATIONS
APPLICATIONS
This recessed COB LED downlight is available in 25W and 35W and
is a conscious new approach for innovative builders and retail
renovators. Direct replacement for the energy consuming
70W-160W Metal Halide downlights or 96W PLC fixtures. The 35W is
the perfect and common 200mm cutout (8”) found in public
buildings and shopping centres. Zero radiation or interference, this
high powered lamp is perfect for over display shelving, centre
display bench or retail broad space and shopping malls.
FEATURES & BENEFITS
• Up to 30° tilt & 358° rotation through gimbal
• White trim, silver can be custom made
• External Philips Certadrive lamp driver
• Sturdy mechanical clamps
• Non-dimmable
• COB LED array
• Plug and Play
3 YEAR
WARRANTY
8
GIMBALLED
PLUG
&
PLAY
littil.com.au
25W
35W
RDL25-40WH
RDL35-40WH
172 x 91 mm
225 x 86 mm
GENERAL
Model Number
Dimensions (LxW)
Lighting Category
Recessed Downlight
Lifetime
33,000 hrs
Warranty
3 years
Operating Temperature
55°C
OPTICAL
Light Output (Lumens)
3100 Lm
LED Type
4200 Lm
COB LED
LED Colour Temperature
4000K
Full Beam Angle
180°
Colour Rendering Index (CRI)
>80
ELECTRICAL
Driver Specs
Philips Certadrive 30W/38W
In: 220-240 VAC, 50-60 Hz
Voltage
Out: 32-42 VDC, 700 mA
Power Factor
>0.9
Dimming
Non-Dimmable
MECHANICAL
Gimballed
Cut-out Diameter
Centre
155 mm
190-200 mm
OPTIONS
Lens
Clear
Body Material Finish
White
Flange
Mounting
Yes
Recessed
COMPLIANCE
9
RECESSED DOWNLIGHTS
OPTIMA
FROSTED 17W RECESSED
DOWNLIGHTS
FOR NEW HOME OR
RENOVATION INSTALLATIONS
APPLICATIONS
Constant current input LED lamp series is a conscious new
approach for innovative builders and home renovators. Replacing
the 50W quartz halogen lamps, this recessed downlight series with
a frosted cover is perfectly suited for areas that require a passive or
indirect flood lighting.
FEATURES & BENEFITS
10W/12W
• Built-in driver
• IP 44 rated
• Complete with 1.5m Australian approved flex and plug
• CRI > 80
17W
• Dimmable on leading and trailing edge dimmers
• 17w will cover up to 4x4m room/floor surface
• Available in 65 x 190 mm or 75 x 240 mm
• CRI >65
• CREE Chip
3 YEAR
WARRANTY
10
>80%
energy savings
replacement
CREE
CHIP
littil.com.au
10W
12W
L-OPTI10W
L-OPT12W
DIMENSIONS
17W
GENERAL
Model Number
Dimensions
52 x 90 mm
51 x 110 mm
Lighting Category
9343907000591
65 x 190
mm
75 x 240
mm
Frosted Recessed Downlight
Lifetime
50,000 hrs
Warranty
3 years
Operating Temperature
55°C
OPTICAL
Light Output (Lumens)
700 Lm
800 Lm
3000K
4000K
LED Type
LED Colour Temperature
816 Lm
936 Lm
1270 - 1350 Lm
4000K
3000K or 4000K
COB LED
CREE
3000K
Full Beam Angle
120°
Colour Rendering Index
>80
ELECTRICAL
In: 220-240 VAC, 50/60 Hz
Voltage
Out: 21-36 VDC, 110 mA
Power Factor
0.9
Dimming
Dimmable
MECHANICAL
Cut-out Diameter
Gimballed
70 mm
90 mm
190 mm
240 mm
No
OPTIONS
Lens
Body Material Finish
Mounting
Frosted
White
Recessed
COMPLIANCE
11
SECTION
12
littil.com.au
REPLACEMENT
LIGHTS
LAMBENT
GU10 Downlights
13
REPLACEMENT LIGHTS
LAMBENT
GU10 DOWNLIGHTS
REPLACING TRADITIONAL
GU10 HALOGEN
DOWNLIGHTS
APPLICATIONS
These 4W, 6W and 9W 240 Volt LED lamps are a direct replacement
for the energy consuming 50W quartz halogen globe. With no
electromagnetic interference and zero radiation, they are highly
suitable for high-spec galleries and museums, perfect for display
counters and retail window boxes.
FEATURES & BENEFITS
• High Colour Rendering Index >75
• Available also in 12V MR16
• Lifetime of 50,000hrs
CCT NEAR
DAYLIGHT
colour temperature
14
Lifetime
36,000 HRS
Dimmable &
non-dimmable
available.
littil.com.au
4W
6W
9W
L-LAM4W
L-LAM6W
L-LAM9W
72 x 50 mm
79 x 50 mm
GENERAL
Model Number
Dimensions (LxW)
62 x 50 mm
Lighting Category
GU10 Downlight
Lifetime
36,000 hrs
Warranty
3 years
Operating Temperature
55°C
OPTICAL
Light Output (Lumens)
LED Type
LED Colour Temperature
270 Lm
400 Lm
450 Lm
COB
SMD
3000K
3400K
Full Beam Angle
60°
Colour Rendering Index
>75
ELECTRICAL
Voltage
240 VAC
Power Factor
Dimming
0.9
Yes
No
OPTIONS
Lens
Clear
Body Material Finish
Silver
Base
GU10
COMPLIANCE
15
SECTION
16
littil.com.au
LUMINA
ARGO
OSTRO
ARRAY
17
BULBS
LUMINA
2.5W/5W/7W/9W/12W BULBS
REPLACING TRADITIONAL
40W, 60W, 75W & 100W
INCANDESCENT GLOBES
APPLICATIONS
2.5W/5W
Our range of bulbs in various wattages are direct replacements for
energy consuming traditional incandescent globes. The bulbs fit
the traditional Bayonet and Edison Screw socket, have zero
electromagnetic emission and zero interference with other devices.
They are perfect for conventional lamp and ceiling fittings.
FEATURES & BENEFITS
• Epistar SMD LEDs
• Various wattages and sizes available for all applications
• Dimmable options available
• E27 or B22 base options available
7W/9W/12W
>90%
Power and
Lighting
Cost Savings
DIMMABLE
Options available
Unique optical
design for uniform
light beam
BASE OPTIONS
18
littil.com.au
2.5W
5W
7W
9W
12W
G60-2.5BC34
G80-5BC34
L-LUM7W
L-LUM9W
L-LUM12W
GENERAL
Model Number
Dimensions (LxW)
109 x 60 mm
132 x 80 mm
Lighting Category
LED Bulb
Lifetime
50,000 hrs
Warranty
3 years
OPTICAL
Light Output (Lumens)
200 Lm
280 Lm
LED Type
750 Lm
930 Lm
Epistar SMD
LED Colour Temperature
3400K
3000K
Full Beam Angle
120°
Colour Rendering Index
Lamp Efficiency
550 Lm
>70
>75
85 Lm/W
60 Lm/W
60 Lm/W
ELECTRICAL
Voltage
240 VAC
Power Factor
Dimming
0.8
Non-Dimmable
Non-Dimmable
Dimmable
Dimmable
Non-Dimmable
MECHANICAL
Gimballed
No
OPTIONS
Base
E27 or B22
COMPLIANCE
*Only the 2.5W/5W are VEEC & ESC Approved
DIMENSIONS
19
BULBS
LUMINA
3W CANDLE BULBS
REPLACING TRADITIONAL
40W CANDLE BULBS
APPLICATIONS
This 3W 240 VAC lamp is a direct replacement for the energy
consuming 40W traditional incandescent candle globes. The bulb
has zero electromagnetic emission and zero interference with other
devices and also fits all traditional bayonet and screw sockets.
Perfect for chandeliers or light fittings with exposed globes that
need to look attractive.
TRIM OPTIONS
FEATURES & BENEFITS
• Classic candle style
• Four socket options available (standard and mini)
DIMMABLE
options available
20
90%
Power and lighting
cost savings
Warm light
3000K
littil.com.au
3W
GENERAL
Model Number
L-LUM3W
Dimensions (LxW)
107 x 32 mm
Lighting Category
C35 Candle Bulb
Lifetime
50,000 hrs
Warranty
3 years
OPTICAL
Light Output (Lumens)
200 Lm
LED Type
16 SMD
LED Colour Temperature
3000K
Full Beam Angle
120°
Colour Rendering Index
>70
ELECTRICAL
Voltage
240 VAC
Power Factor
0.8
Dimming
Dimmable Option Available
MECHANICAL
Gimballed
No
OPTIONS
Base
E27
B22
E14
B15
COMPLIANCE
DIMENSIONS
21
BULBS
LUMINA
G24 LED PLC BULB
REPLACING 18W-26W
TRADITIONAL CFL LAMPS
To see 360 degree rotations
of this product visit littil.com.au
APPLICATIONS
At last a LED replacement for the G23/24 CFL Lamps. This universal
G24 socket will fit nearly all existing G23/24 sockets in both 2 & 4
pins. Plug and play in iron core ballasts (must remove capacitor if
fitted) or take the 240 VAC mains supply directly to the lampholder
for electronic ballasts. Ideal for all recessed commercial fittings in
council buildings, libraries and nursing homes.
22
littil.com.au
FEATURES & BENEFITS
• Universal socket
• Frosted lens cover
• Versatile and innovative
High Colour
Rendering Index
>80
Unique optical
design for uniform
light beam
UNIVERSAL
socket
8W
10W
13W
15W
G24-8W40
G24-10W40
G24-13W40
G24-15W40
144 mm
166 mm
GENERAL
Model Number
Dimensions (Length)
Lighting Category
201 mm
G24 Bulb
Lifetime
40,000 hrs
Warranty
3 years
OPTICAL
Light Output (Lumens)
LED Type
LED Colour Temperature
790 Lm
900 Lm
1000 Lm
1200 Lm
SMD
4000 – 4500K
Full Beam Angle
360°
Colour Rendering Index
>80
ELECTRICAL
Voltage
Power Factor
Dimming
100 – 240 VAC 50/60Hz
0.9
Non-Dimmable
OPTIONS
Lens
Frosted
Base
8W available in E27 base
COMPLIANCE
23
CORN LIGHTS
ARGO
CORN LIGHT
REPLACING TRADITIONAL
50W – 500W METAL HALIDES
To see 360 degree rotations
of this product visit littil.com.au
APPLICATIONS
This LED Corn Lamp is available in 20W, 30W, 50W, 60W, 70W, 100W,
120W and 150W and is a direct replacement for 50W – 500W
Mercury Vapour & Metal Halide Lamps. Providing a full 360°
beam angle, this light leaves no under-illuminated areas.
40W+ lamp models come with active air fan cooling, speeding up
heat dissipation. Ideal for street, high bay, post lamp, lowbay and
droplight fixtures in both indoor and outdoor environments. Ideal
alternatives to high bays in warehouse and industrial spaces.
24
littil.com.au
FEATURES & BENEFITS
360°
• The most cost effective alternative to replacing entire high
bay fixtures.
beam angle
• IP20 rated (IP40 optional)
• Wire insulated base
Lifetime
• Meanwell drivers for 100W, 120W and 150W lamp models
50,000 HRS
• Sunon fan for 40W+ lamp models
• Aluminium heatsink
3 YEAR
WARRANTY
• Easy retrofit
• Available custom made in 3000K, 4000K & 5000K
20W
30W
50W
70W
100W
120W
150W
LSCB20WXY
LSCB30WXY
LSCB50WXY
LSCB70WXY
LSCB100WXY-E
LSCB120WXY-E
LSCB150WXY-E
105 x 177
105 x 182
105 x 221
105 x 283
128 x 282
128 x 307
128 x 332
13,201
15,715
20,598
GENERAL
Model Number
Dimensions (WxH mm)
Lighting Category
Bulbs
OPTICAL
Lumens
2,721
4,020
6,434
LED Type
10,034
2835 White SMD LED
LED Colour
Temperature
6000K
CRI
> 80
ELECTRICAL
Driver Type
Internal Driver
In: 100-240 VAC 50/60 Hz
Voltage
Power Factor
Out: 30-34 VDC, 9.2A Max
0.94
0.97
0.98
Dimming
0.98
0.97
0.98
0.97
1 - 10V dimming available
Sensor Capability
Base
External MEANWELL Driver
No
E27 or E40
E40
OPTIONS
Various CCT Available
Cover
Also available in 3000K, 4000K & 5000K
Available with custom made milky cover or IP40 cover
COMPLIANCE
25
OYSTER
OSTRO
LED OYSTER LIGHT
REPLACING TRADITIONAL
55W FLUORESCENT FITTINGS
APPLICATIONS
Our constant current input LED Oyster lamp series is a new
approach for innovative commercial builders and office renovators.
It comfortably replaces a 55W Fluorescent circular tube.
The surface mounted Oyster light series consumes only 18W-25W
of power – perfect fir areas that require a passive or indirect
dimmable flood light.
FEATURES & BENEFITS
• Mounting bracket for easy installation
• Non-gimballed
• 15W will cover up to 4x4m room/space
• Slim profile
• Available in 300mm & 350mm
• IP54 rated
26
120°
IP54
DIMMABLE
beam angle
rated
options available
littil.com.au
18W
25W
GENERAL
Model Number
Dimensions (WxH)
L-OYS18W
L-OYS25W
300 x 40 mm
350 x 40 mm
Lighting Category
Oyster
Lifetime
36,000hrs
IP Rating
IP54
Warranty
3 years
OPTICAL
Light Output (Lumens)
1350 Lm
LED Colour Temperature
3000K
1420 Lm
2490 Lm
4000K
Full Beam Angle
120°
Colour Rendering Index
>80
ELECTRICAL
Voltage
200-240 VAC, 30 Hz
Power Factor
>0.9
Dimming
Dimmable
MECHANICAL
Cut-Out
300 mm
350 mm
OPTIONS
Lens
Frosted Lens
Trim
White
COMPLIANCE
27
RETAIL DISPLAY
ARRAY
RECTANGULAR LED RETAIL
DISPLAY LIGHT
REPLACING 70W-150W
METAL HALIDE LAMPS
APPLICATIONS
Our rectangular LED Retail Display Light is available in 40W. It offers
zero radiation or interference and is perfect for over display
shelving, centre display benches or broad retail spaces.
FEATURES & BENEFITS
• H
igh colour rendering index > 73 to replicate
natural daylight
• The perfect retail display lighting solution
100%
LUMINAIRE
EFFICIENCY
28
Operating
temperature below
< 34°C
PLUG
&
PLAY
littil.com.au
40W
GENERAL
Model Numer
RD40-40W
Dimensions (LxWxH)
265 x 225 x 105 mm
Lighting Category
Retail Display Light
Lifetime
36,000 hrs
Warranty
3 years
OPTICAL
Light Output (Lumens)
LED Type
LED Colour Temperature
4600 Lm
CREE
4000K
Full Beam Angle
85°
Colour Rendering Index
>80
ELECTRICAL
Voltage
Power Factor
Driver Type
Dimming
In: 220-240, 30/60 Hz
Out: 32-42 VDC, 0.21A
>0.9
External
Non-Dimmable
MECHANICAL
Gimballed
Side
COMPLIANCE
29
SECTION
VIVA
LED Troffers
Air Return Troffer
POLAR
Panel Lights
30
littil.com.au
TROFFERS
31
TROFFERS
VIVA
LED TROFFERS
REPLACING 86W TWIN T8
FLUORESCENT FITTINGS
APPLICATIONS
Constant current input 32W LED lamp, direct replacement for the
energy consuming 86W twin 1200 x 300mm, 600 x 300mm or 1200
x 600mm light fitting. Troffer and driver combined consume only
32/64 Watts with zero radiation or interference. One of our most
versatile products, LED troffers are suitable for every clear span,
suspended or subdivided commercial or public area ceiling.
FEATURES & BENEFITS
• Unique optical design with lumen output ratio of 90%
• Contains no lead or mercury
• Up to 5600 Lms
• Kit available for Recessed/Surface mounted installation
• Inclusive driver with flexible cord/AU mains plug
• Dimmable and Dali options
High Colour
Rendering Index
>85
90%
LUMINAIRE
EFFICIENCY
DIMMABLE
& Dali options
available
NEW COI Hospital Troffer
• 32W 1200 x 300mm Troffer in 4000K, 5000K or 6000K
•Low Cyanosis Observation Index (COI) of 1.4 compliant to
Australian Standard 1680.2.5
• 2111 Lms
32
littil.com.au
32W
GENERAL
Model Number
LED32TROF 600x600D60
Dimensions (mm)
LED32TROF 1200x300D60
600 x 600
Lighting Category
1200 x 300
Linear
Lifetime
36,000 hrs
Warranty
3 years
OPTICAL
Light Output (Lumens)
2700 Lm
2750 Lm
4000K
5000K
LED Type
2800 Lm
Linear
LED Colour Temperature
Full Beam Angle
120
Colour Rendering Index
>85
6000K
0
ELECTRICAL
Wattage
Driver Type
Voltage
32W
littil LED, Philips Certadrive Driver or DALI Philips Xitanium Driver
In: 220-240 VAC, 50/60 Hz
Our: 32-42 VDC, 700mA
Power Factor
Dimming
>0.9
Dimmable and Dali Optional
OPTIONS
Low COI
Custom designed low COI available
Wattages
Available in 16W 600 x 300 and 64W 1200 x 600
Mounting
Surface mount and plaster recess kits available
COMPLIANCE
*1200x300 & 600x600 with littil LED driver are VEEC and ESC approved
33
TROFFERS
VIVA
AIR RETURN TROFFER
REPLACING 86W TWIN T8
FLUORESCENT FITTINGS
To see 360 degree rotations
of this product visit littil.com.au
APPLICATIONS
Constant current input 32W LED Lamp, direct replacement for
the energy consuming 86W twin 1200x300 mm, 600x600 mm,
600x300 mm or 1200x600 mm light fitting. Troffer and driver
combined consume only 32W, with zero radiation or interference.
Suitable for every clear span, suspended or subdivided
commercial or public area ceiling.
34
littil.com.au
FEATURES & BENEFITS
High Colour
Rendering Index
• Air return into empty ceiling and AC boot
connection
>85
• Unique optical design with lumen output ratio of
90%
90%
LUMINAIRE
EFFICIENCY
• Up to 2800 Lm
• Philips Certadrive driver, non-dimmable
• Kit available for Recessed/Surface mounted
installation
DIMMABLE
• Flexible cord/AU mains plug connected to driver
options available
30W
GENERAL
LED Troffer 500x500 AIR
with 30W Philips Certadrive
LED Troffer 600x600 AIR
with 30W Philips Certadrive
LED Troffer 1200x300 AIR
with 30W Philips Certadrive
Dimensions (LxW)
500 x 500
600 x 600
1200 x 300
Lighting Category
Linear
Linear
Linear
Model Number
Lifetime
36,000 hrs
Warranty
3 years
OPTICAL
Light Output (Lumens)
LED Colour Temperature
2700 - 2800 Lms
Available in 4000K, 5000K and 6000K
Full Beam Angle
120°
Colour Rendering Index
>85
ELECTRICAL
Driver Type
Voltage
Power Factor
Dimming
CertaDrive 30W 0.7A 42V I 230V
In: 220-240 VAC, 50/60 Hz
Out: 32-42 VDC, 700mA
>0.9
Dimmable and Dali Options
OPTIONS
Lens
Frosted (Opal)
COMPLIANCE
35
PANEL LIGHTS
POLAR
LED PANEL LIGHTS
REPLACING 86W TWIN T8
FLUORESCENT FITTINGS
APPLICATIONS
Our slim design LED panel lights are a direct replacement for the
energy consuming 86W twin T8 fluorescent fittings. They can be
embedded in ceilings, surface mounted or suspended from the
ceiling. They are suitable for every clear span in commercial or
public area lighting.
36
littil.com.au
FEATURES & BENEFITS
• 9mm panel thickness
• Light weight, quick and easy to install
• Flexible cord/ AU mains plug attached to driver
• Philips Certadrive driver, non-dimmable
CRI
>80
Lifetime
50,000 HRS
3 YEAR
WARRANTY
30W
GENERAL
Model Number
L-PAN30WPC
Dimensions (mm)
600x600
1200 x 600
Lighting Category
Panel
Lifetime
36,000 hrs
IP Rating
IP20
Warranty
5 years
OPTICAL
Light Output (Lumens)
LED Colour Temperature
2250 Lm
2500 Lm
2450 Lm
4000K
5000K
6000K
Full Beam Angle
110
Colour Rendering Index
>80
2660 Lm
2640 Lm
4000K
5000K
2620 Lm
6000K
0
ELECTRICAL
Driver Type
Voltage
Power Factor
Dimming
Philips 30W Certadrive
In: 220–240 VAC, 50/60 Hz
Out: 32-42 VDC, 700mA
>0.9
Non-Dimmable
OPTIONS
Trim
White
Wattages
Also available in 15W 600 x 300 mm
Mounting
Surface mount and plaster recess kits available
COMPLIANCE
37
FORTIS
T8 LED Tubes
T8 LED Battens
Tri-Proof Battens
T8 LED Battens & Diffusers
IP65 LED Battens & Diffusers
38
TUBES
SECTION
littil.com.au
5
39
TUBES
FORTIS
T8 LED TUBES
REPLACING TRADITIONAL
36W FLUORESCENT TUBES
APPLICATIONS
15 Watt T8 LED tube, direct replacement for the energy consuming
T8 36W fluorescent tubes. Consumes only 15 Watts of power, with
zero radiation, highly suitable for spaces that require a uniform,
high definition light source.
Ideal for the home, office, industrial, clear span retail and indoor
public areas.
FEATURES & BENEFITS
• Hongli SMD light source
• Single end wired
• Internal & external HRC compliant fuses for double
protection
• Colour consistency SDCM: <5 MacAdam steps
• CRI > 80
• AS/NZS 60598.1 & 60598.2.1 compliant
• Available in clear and frosted lenses
Lifetime
50,000 HRS
40
120°
beam angle
5 YEAR
WARRANTY
littil.com.au
9W
15W
18W
22W
S-T809W600
S-T815W1200
S-T818W1200
S-T822W1500
600 mm
1200 mm
1200 mm
1500mm
GENERAL
Model Number
Dimensions (Length)
Lighting Category
Linear
Lifetime
50,000 hrs
Warranty
5 years
OPTICAL
Lens
Lumens
LED Type
LED Colour
Temperature
Clear
Frosted
Clear
Frosted
Clear
Frosted
Clear
Frosted
1180 Lm
1050 Lm
1950 Lm
1750 Lm
2350 Lm
2100 Lm
2950 Lm
2700 Lm
Hongli
4000K, 5000K and 6000K
ELECTRICAL
Driver Type
Voltage
Power Factor
Dimming
Internal
100-240 VAC, 50/60 Hz
0.95
Non-Dimmable
OPTIONS
Lens
Clear or Frosted Lenses available
COMPLIANCE
41
BATTENS
FORTIS
T8 LED BATTENS
REPLACING TRADITIONAL
36W T8 FLUORESCENT
BATTENS
without cage
with cage
APPLICATIONS
Our T8 LED Battens comes complete with VEEC approved tubes in
either clear or frosted lens and are available in 1200 mm single, 1200
mm double, 600 mm single and 600 mm double fittings. They are
made of heavy gauge cold rolled steel with ballast cover locked by
tool-less screws for quick inspection. Easy for lamp replacement
and no maintenance required.
42
littil.com.au
FEATURES & BENEFITS
• Epistar SMD light source
• Single end wired with starter socket & rotatable pins
• Available with clear or frosted lens T8 tubes
• Available with/without cage
Superior Colour
Rendering Index
>80
Lifetime
Unique optical
design for uniform
light beam
50,000 HRS
10W
15W
20W
30W
LEDBAT600S10WDF
LEDBAT1200S15WDF
LEDBAT600D20WDF
LEDBAT1200D30WDF
600 mm
1200 mm
600 mm
1200 mm
GENERAL
Model Number
Dimensions (Length)
Lighting Category
Linear
Lifetime
50,000 hrs
Warranty
5 years
OPTICAL
Light Output (Lumens)
LED Type
LED Colour Temperature
1350 – 4600 Lms
SMD
5500K
Full Beam Angle
120°
Colour Rendering Index
>80
ELECTRICAL
Voltage
Power Factor
Dimming
100-240 VAC, 30/60 Hz
0.95
Non-Dimmable
OPTIONS
Cage
Available with/without cage
COMPLIANCE
43
BATTENS
FORTIS
T8 LED BATTEN & DIFFUSER
REPLACING TRADITIONAL
36W FLUORESCENT TUBES
APPLICATIONS
Our T8 LED Batten & diffuser fitting comes complete with VEEC
approved tubes in either clear or frosted lens and is available
in 1200 mm single, 1200 mm double, 600 mm single and
600 mm double fittings. Heavy gauge rolled steel caps lock
diffuser into position. Ballast cover is locked by tool-less screws
for quick inspection. Easy for lamp replacement and no
maintenance required.
FEATURES & BENEFITS
• Epistar SMD light source
• Single end wired with starter socket & rotatable pins
• Available with clear or frosted lens T8 tubes
• Available in 5500K
Superior Colour
Rendering Index
>80
44
Lifetime
50,000 HRS
Unique optical
design for uniform
light beam
littil.com.au
10W
15W
20W
30W
LEDBAT600S10WCG
LEDBAT1200S15WCG
LEDBAT600D20WCG
LEDBAT1200D30WCG
600 mm
1200 mm
600 mm
1200 mm
GENERAL
Model Number
Dimensions (Length)
Lighting Category
Linear
Lifetime
50,000 hrs
Warranty
5 years
OPTICAL
Light Output (Lumens)
LED Type
LED Colour Temperature
1100 - 2300 Lms
SMD
4000K, 5000K, 6000K
Full Beam Angle
120°
Colour Rendering Index
>80
ELECTRICAL
Voltage
Power Factor
Dimming
100-240 VAC, 50/60 Hz
0.93
Non-Dimmable
OPTIONS
Lens
Clear or Frosted
COMPLIANCE
45
BATTENS
FORTIS
IP65 LED BATTEN & DIFFUSER
REPLACING TRADITIONAL
36W FLUORESCENT TUBES
APPLICATIONS
Our IP65 Batten & Diffuser fitting comes with VEEC approved tubes
in either clear or frosted and is available in 1200 mm single, 1200
mm double, 600 mm single and 600 mm double fittings. Easy
release stainless steel clips and clearly marked single ended wired
tombstones. Heavy duty diffuser and quick release inspection
cover with tamperproof diffuser tabs.
FEATURES & BENEFITS
• Epistar SMD light source
• Single end wired with starter socket & rotatable pins
• Available with clear or frosted lens T8 tubes
• IP65 Rated
• Available in 5500K
Superior Colour
Rendering Index
>80
46
Lifetime
50,000 HRS
Unique optical
design for uniform
light beam
littil.com.au
10W
15W
20W
30W
LEDBAT600S10WIP65
LEDBAT1200S15WIP65
LEDBAT600D20WIP65
LEDBAT1200D30WIP65
600 mm
1200 mm
600 mm
1200 mm
GENERAL
Model Number
Dimensions (Length)
Lighting Category
Linear
Lifetime
50,000 hrs
Warranty
5 years
OPTICAL
Light Output (Lumens)
LED Type
LED Colour Temperature
1100 - 2300 Lms
SMD
4000K, 5000K, 6000K
Full Beam Angle
120°
Colour Rendering Index
>80
ELECTRICAL
Voltage
Power Factor
Dimming
100-240 VAC, 50/60 Hz
0.93
Non-Dimmable
OPTIONS
Lens
Clear or Frosted
COMPLIANCE
47
BATTENS
FORTIS
IP65 TRI-PROOF LED BATTEN
FOR USE WHERE
WATERPROOF, DUST PROOF
AND CORROSION PROOF
LIGHTING IS NECESSARY
To see 360 degree rotations
of this product visit littil.com.au
APPLICATIONS
This IP65 LED tri-proof light is widely used in retail stores,
semi-outdoor ceilings, workshops, agriculture sheds, car parks,
public places & food processing factories.
The high energy efficiency light source and constant current
output design, greatly improve the fixture’s life span.
48
littil.com.au
IP65 RATED
FEATURES & BENEFITS
• Surface mounted or recessed ceiling compatible
WATER RESISTANT
• All-in-one stream line body with high-density
silicon rubber sealing ring protection
IP65 RATED
• Unique PVC material and stainless steel mounting
clips for easy installation
• Available in 640mm, 1200mm and 1500 mm
CORROSION &
DUST PROOF
15W
35W
43W
TriLED15-600
TriLED35-1200
TriLED43-1500
640 x 124
1200 x 124
1500 x 124
GENERAL
Model Numer
Dimensions (mm)
Lighting Category
Linear
Lifetime
36,000 hrs
IP Rating
IP65
Warranty
3 years
OPTICAL
Light Output (Lumens)
LED Colour Temperature
1440 - 1500 Lm
3000K
4000K
6000K
3600 - 3700 Lm
3000K
4000k
Full Beam Angle
120°
Colour Rendering Index
>80
Lamp Efficiency
6000K
4340 - 4440 Lm
3000K
4000K
6000K
100 Lm/W
ELECTRICAL
Voltage
Power Factor
Dimming
220 - 240 VAC, 50/60 Hz
>0.9
0-10V Dimming Available
OPTIONS
Lens
Frosted Opal
Trim
White
COMPLIANCE
49
6
SECTION
50
littil.com.au
FLOODLIGHTS
6
NIMMO
LED Floodlight Range
51
FLOODLIGHTS
NIMMO
LED FLOODLIGHT RANGE
REPLACING 50W TO 2000W
FLOOD LIGHTS
To see 360 degree rotations
of this product visit littil.com.au
APPLICATIONS
Waterproof LED Flood Light in 10W-1,000W, a direct replacement
for the energy consuming 50W-2,000W Metal Halide Flood Lamps.
Zero radiation or interference, this high powered lamp is perfect
for commercial applications such as sports grounds and stadiums.
52
littil.com.au
FEATURES & BENEFITS
25 - 120°
• Available in 3000K or 5000K
beam angle
• High performance pipe efficiently dissipates heat
IP65 RATED
• Patented zipped-fin technology
• Waterproof respirator – avoids fogging and
condensation
WATERPROOF
• MEANWELL driver
IP65 RATED
• Long 1m flex cable for easy installation
• IP65 rated
CORROSION &
DUST PROOF
10W
20W
30W
50W
70W
100W
150W
200W
400W
500W
1000W
Model Numer
L-NIM10W
L-NIM20W
L-NIM30W
L-NIM50W
L-NIM70W
L-NIM100W
L-NIM150W
L-NIM200W
L-NIM400W
L-NIM500W
L-NIM1000W
Dimensions
(mm)
159 x 132 x
53
203 x 176
x 64
219 x 191 x
64
282 x 220
x 113
282 x 220
x 117
310 x 268
x 182
365 x 298
x 187
465 x 344
x 197
436 x 416
x 300
439 x 419
x 337
534 x 436
x 497
13660
Lms
18863
Lms
40000
Lms
50000
Lms
100000
Lms
GENERAL
Category
Floodlights
Lifetime
36,000 hrs
IP Rating
IP65
Warranty
3 years
Operating
Temperature
450C
OPTICAL
Output (Lms)
LED Type
LED Colour
Temperature
Full Beam Angle
775 Lms
1799 Lms
2632
Lms
4532
Lms
6388
Lms
9125 Lms
Epistar
CREE
3000K, 4000K, 5000K or 6000K available.
25o, 45o, 60o, 90o, 100o
120o
CRI
>80
ELECTRICAL
Voltage
100-240 VAC, 30/60 Hz
Power Factor
Dimming
0.9
Non-Dimmable
OPTIONS
Lens
Trim
Clear
Frosted
Black
COMPLIANCE
53
SECTION
ZETTA
LED Highbay Range
54
littil.com.au
HIGHBAY
55
HIGHBAY
ZETTA
LED HIGHBAY RANGE
REPLACING TRADITIONAL
METAL HALIDE AND
MERCURY VAPOUR LAMPS
To see 360 degree rotations
of this product visit littil.com.au
APPLICATIONS
Constant current input LED light with a power range from 100W to
200W, direct replacement for the energy consuming 200 to 400W
Mercury vapour or Metal Halide lamps.
Emits a light beam in conventional cool white light, with a light beam
spread between 50° and 120° depending on the lens plate choice.
Ideal luminaire for all industrial, warehouse or covered spaces.
56
littil.com.au
FEATURES & BENEFITS
50%+
replacement
energy savings
• Suspended – variable length
• Suitable for multi strike application
• Quality internal MEANWELL driver with mains socket
• Quality NICHIA chips
Lifetime
60,000 hrs
• CCT 5000K
• Optional anti-glare hood
• Reduced maintenance
5 YEAR
WARRANTY
• IP65 Rated
• CRI >70
100W
120W
150W
200W
AGC-HB01-100
AGC-HB01-120
AGC-HB01-150
AGC-HB01-200
GENERAL
Model Numer
Dimensions (mm)
388x193x383
388x195x388
Lighting Category
388x200x388
Highbay
OPTICAL
Beam Angle
Lumens
50°
90°
120°
50°
90°
120°
50°
90°
120°
50°
90°
120°
11,946
12,704
13,364
14,411
15,600
15,600
18,080
19,640
19,002
23,801
26,000
24,094
LED Type
Nichia
LED Colour
Temperature
5000K
ELECTRICAL
Driver Type
Voltage
Power Factor
Dimming
Sensor Capability
Internal MEANWELL Driver
100-240 VAC, 50/50 Hz
>0.95
1-10V Dimmable Available
No
OPTIONS
Various Colour
Temperatures
Available
Trim
Available in 3000K, 4000K, 5000K & 6000K
Red Trim
COMPLIANCE
57
OUR COMPANY
OUR
COMPANY
littil is a market leading, 100% Australian
owned manufacturer of a broad range of
unique, custom built and quality LED lights
designed in Australia for Australian conditions.
A partnership with littil provides access to the highest levels of
service, quality and reliability of innovative and customised LED
lights.
littil = big difference
Expertise you can trust
Innovation & quality
Australian designed & engineered
Latest LED technologies and constant innovation
Competitive Prices
Focus on quality & joint beneficial long term relationships
First class pre and post purchase support mechanisms
We work with a broad spectrum of clients from commercial and
public sectors, as well as a number of trusted trade partners, and
specialise in customising LED lighting solutions to suit any school,
government or commercial building installation.
58
littil.com.au
NOTES
HOW TO ORDER
Go to littil.com.au – Complete the contact form and
we will call you within 2 business days
Call 1300 699 611 and order over the phone
Visit the littil Trade Centre during normal business
hours, Monday to Friday at
61-65 Geddes St
Mulgrave VIC 3170
59
61-65 Geddes St
Mulgrave, VIC 3170, Australia
T 1300 699 611
E [email protected]
www.littil.com.au
60
littil.com.au
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement