Nova-Pro Stroboscope/Tachometer The Nova-Pro is a series of powerful portable visual inspection and speed measurement tools. We have combined all the features of our hand held LED stroboscopes together with a full function laser tachometer to create a compact, ergonomic and extremely powerful two in one predictive maintenance tool. The stroboscope light source is made up of twelve LED’s which are extraordinarily bright yet extremely efficient allowing cool continuous operation and extremely long battery life (up to 19 hours on a single charge). Continuous operation is also possible with the optional AC adapter. Nova-Pro 100: Designed for simple stroboscopic stop motion inspection and RPM measurement applications. The integral laser module is an optional item that can be added to make the 100 a full featured non-contact tachometer. Nova-Pro 300: Has all the features of the 100. It includes the integral laser module for tachometer mode or strobe trigger mode and adds a high contrast inverse blue LCD display with backlight and touch sensitive number pad (for setting flash rates quickly), ultra high intensity LED’s for even more light output, memory for up to 10 preset flash rates, input and output jacks for external sensors or pulse repeater output and NIST calibration certificate. Patent Pending Nova-Pro 500: Has all the features of the 300 and adds an additional standard battery pack, remote laser docking station, phase delay, time delay and virtual slow motion. Features Stroboscope and tachometer in one tool Super bright LED’s Integral/removable laser module Water and dust resistant IP54 enclosure 1/4” x 20 tripod mount Ergonomic one handed operation Removable rechargeable Li-ion battery Continuous AC operation available TTL compatible input/output (300, 500) NIST certificate included (300, 500) Typical Uses Visual running inspections of: Fan blades, motors, shafts, gears, rollers, webs, belts, sheaves, chains, sprockets and much more without having to shut down your process Diagnose alignment issues Determine speed of rotating equipment using strobe or built in laser tachometer Troubleshoot high speed automation processes by placing them in virtual slow motion Print quality inspection Textile processing inspection Phase reference for balancing Ordering Information Item Nova-Pro 100 Nova-Pro 100 Kit Nova-Pro 300 Nova-Pro 300 Kit Nova-Pro 500 Nova-Pro 500 Kit Nova-Pro 100 AC Nova-Pro 100 AC Kit Nova-Pro 300 AC Nova-Pro 300 AC Kit 2 Contact us: Description 100 Strobe, standard battery, recharging station with interchangeable wall plugs and manual Same as above with plastic latching carry case 300 Strobe, laser module, standard battery, recharging station with interchangeable wall plugs, NIST cert and manual Same as above with plastic latching carry case 500 Strobe, laser module with remote laser dock, (2) standard batteries, recharging station with interchangeable wall plugs, NIST cert and manual Same as above with deluxe die cut foam lined water tight plastic carry case 100 Strobe, 115/230 Vac adapter with interchangeable wall plugs and manual Same as above with plastic latching carry case 300 Strobe, laser module, 115/230 Vac adapter with interchangeable wall plugs, NIST cert and manual Same as above with plastic latching carry case Ph: 800-999-3390 Fax: 603-886-3300 www.monarchinstrument.com Part No. 6241-010 6241-011 6243-010 6243-011 6245-010 6245-011 6241-020 6241-021 6243-020 6243-021 [email protected] Nova-Pro Stroboscope/Tachometer Specifications “Nova-Pro is compact, ergonomic and extremely powerful” 100 300 Flash Range (FPM/RPM): 6 digit numeric and 5 digit alphanumeric LCD reflective Display: Accuracy/Resolution: 6 digit numeric and 5 digit alphanumeric LCD with touch keypad. High contrast blue background/ white characters with backlight 0.001% of setting or ±1 lsd/6 digits to 0.001 Light Source: 12 LED Array Flash Duration: 12 High Output LED Array Adjustable to 14 degrees/1000 µsecs max 3400 Lux @ 6000 FPM, 12 inches (30.48cm), 2° duty cycle, Max light output: 24,000 Lux Light output: 5500 Lux @ 6000 FPM, 12 inches (30.48 cm), 2° duty cycle, Max light output: 30,000 Lux Color Temperature: approx. 6200°K External Triggers in/out: N/A TTL (12Vdc Max) Input. Provides 3.3 Vdc TTL output 0-999,999 RPM with 0-999,999 RPM with integral laser or external input integral laser (Optional) Tachometer Mode: Programmable Memory: N/A Yes (10 set points) Internal Phase Shift: N/A Yes Phase Delay - degrees: N/A -360.0 to 345.0 degrees Time Delay - milliseconds: N/A -50.000 to 50.000 msec Virtual RPM (Slow Motion): N/A -60.0 to 60.0 VRPM Standard battery pack: 9.5 hours typical (6000 FPM, 2° duty cycle) Hi-capacity battery pack (optional): 19 hours typical (6000 FPM, 2° duty cycle) Operating Time: Remote Laser Dock - Remove the laser module from the NovaPro and insert it into the remote laser dock with tripod mount. Plug the cable into the external input jack (300, 500 models) and make measurements in hard to reach or unsafe areas. 500 30 to 999,999 Power Supply (Battery): Removable/rechargeable Standard Li-Ion battery Removable/rechargeable Standard Li-Ion battery packs (Qty. 2) with pack with 115/230 50/60Hz recharging station 115/230 50/60Hz recharging station 115/230 Vac 50/60Hz AC adapter with 6 foot (2M) cable and interchangeable outlet adapters (Optional) Power Supply (A/C): 1.4 Lbs. (635 grams) with Standard battery 1.5 Lbs. (680 grams) with Hi-capacity battery Weight: Size (H x W x D): 9.5 x 3.75 x 5.5 in. (241 x 95 x 140mm) Housing material/rating: ABS/IP54 Accessories AC Power Adapter - The 115/230 AC power adapter allows for continuous operation. Included with certain models or may be ordered separately. Battery Recharging Station Contact us: Ph: 800-999-3390 Fax: 603 -886-3300 Item 1. Standard Li-ion battery pack 2. Hi-capacity Li-Ion battery pack 3. Battery charging station 115/230 Vac, 50/60 Hz 4. Laser module 5. Remote laser dock and blanking panel 6. AC power adapter 115/230, 50/60Hz 7. Deluxe water tight carry case 8. T-5 reflective tape 9. Miniature tri-pod with 1/4” x 20 stud www.monarchinstrument.com Part No. 6281-010 6281-011 6281-012 6281-020 6281-021 6281-015 6281-031 6180-070 6180-040 [email protected] 3 Nova-Strobe LED Stroboscopes The Nova-Strobe LED family of rugged industrial stroboscopes provide an extremely bright, uniform light output for performing stop motion diagnostic inspection and RPM measurements. The twelve LED light source is extremely efficient which means long battery life and continuous cool operation. A wide operating range of 30-500,000 flashes per minute covers all applications. The Basic BBL is designed for simple stop motion inspection and RPM measurement applications. The Deluxe DBL adds internal phase shifting, memory for up to 5 preset flash rates, NIST calibration certificate and tachometer mode for speed measurements up to 500,000 RPM using optional remote sensors or TTL pulse input/output. The top of the line Phaser PBL has all the features of the DBL and adds external phase delay, time delay and virtual RPM mode. The PBL will also run continuously, 24/7 with the power supply/recharger. Each unit is available stand alone or as a kit. Specifications BBL Basic DBL Deluxe Flash Range (FPM/RPM): 30-500,000 Display: 6 Digit Numeric and 5 Digit Alphanumeric LCD Accuracy/Resolution: 0.01%.... Features Bright, uniform light pattern Diagnostic inspection and RPM checks Digital LCD backlit display (DBL, PBL) Tripod mounting bushing (¼”-20) in handle NIST certificate included with DBL and PBL Lightweight industrial design 12 button keypad makes entering flash rates extremely quick (DBL, PBL models) Continuous, 24/7 operation (PBL) 0.002% of setting or ±1 least significant digit/0.01 FPM 4200 Lux @ 6000 FPM, 12 inches (30.48cm), 2° duty cycle Max light output: 27,000 Lux Light output: PBL Phaser Flash Duration: Light Source: Color Temperature: External Triggers in/out: Tachometer Mode: N/A N/A Programmable Memory: N/A Internal Phase Shift: Phase Delay - Degrees: Time Delay - milliseconds: N/A Adjustable to 14 degrees /3000µsecs max 12 LED Array ~6200°K TTL (24Vdc Max) Input. Provides 3.3 Vdc TTL output 0-500,000 RPM (Use with optional remote sensor) Yes Yes N/A N/A Virtual RPM (Slow Motion): Operating Time: Power Supply: Weight: Size (L x W x H): 0.1 to 359.9 degrees 0.01 to 1000 msec. N/A 0-200 VRPM 8-10 hours typical @ 1800 FPM 8-10 hours typical @ 1800 FPM with batteries or continuous using power supply Internal NiMH rechargeable batteries with 115/230 50/60Hz recharger Internal NimH rechargeable batteries or continuous using 115/230 50/60 Hz Vac power supply/recharger 1.9 Lbs. (860g) Body: 9" x 3.66" x 3.56" (229 x 93 x 90 mm); Reflector Housing: 4.8" (122 mm) dia.; Handle: 4.254" (108 mm long) Ordering Information Item Nova-Strobe BBL Nova-Strobe BBL Kit Nova-Strobe DBL Nova-Strobe DBL Kit Nova-Strobe PBL Nova-Strobe PBL Kit Description BBL Strobe, universal 115/230 recharger with interchangeable wall plugs and manual Same as above with plastic latching carry case DBL Strobe, universal 115/230 recharger with interchangeable wall plugs, manual and NIST Cal Same as above with plastic latching carry case PBL Strobe, universal 115/230 power supply/recharger with USA and Euro cables, manual and NIST Cal Same as above with Deluxe water tight plastic carry case Accessories (compatible with all Nova-Strobes) Item 1. Remote Optical Laser Sensor 2. Splash Proof Cover 3. Protective Rubber Cover 4. Reflective Tape, 5” roll x 1/2” 5. Pulse input/output cable (BNC) 6. Standard Latching Carry Case 7. Deluxe Water Tight Carry Case 4 Contact us: Part No. 6180-029 6280-041 6280-048 6180-070 6280-037 6280-040 6280-049 Ph: 800-999-3390 1 2 Part No. 6230-010 6230-011 6231-010 6231-011 6232-010 6232-011 7 6 5 3 4 Fax: 603-886-3300 www.monarchinstrument.com [email protected] PLS Pocket LED Stroboscope The PLS Pocket LED Stroboscope is a compact, rugged, light weight device that provides a super bright, uniform light output for performing visual diagnostic inspection and RPM measurements. The silent cool running LED’s are extremely energy efficient providing up to 5 hours of operation on a single charge. The PLS has a wide operating range of 30-300,000 flashes per minute which covers most industrial applications. Additional features include external input for remote triggering or tachometer mode, pulse output, memory for up to 5 preset flash rates, NIST calibration certificate, tachometer mode for speed measurements up to 300,000 RPM using optional remote sensors and TTL pulse output. Features Energy efficient with long battery life Extremely bright, uniform light Quiet/Cool operation No lamp replacements Diagnostic inspection and RPM checks Compact size Lightweight Digital LCD backlit display Tripod mounting bushing (¼”-20) CE marked, RoHS compliant NIST certificate included Intuitive one hand operation 7 LED Array Specifications Display: LCD display with 6 numeric 0.506 inch (12.85mm) high digits and 5 alphanumeric 0.282inch (7.11mm) high digits Indicators: Battery level, On Target, Select, TACH, and EXT icons Memory: Last setting before power down is remembered and restored on next power up. 5 user settable memory locations Flash Duration: Adjustable 0.5 to 2500 microseconds or 0.1 to 14 degrees of rotation (auto adjusts with flash rate) Power: Battery powered: Internal Li-Ion rechargeable batteries 3.6Vdc Light Source: 7 LED Array Light Output: 2000 Lux at 6000 FPM 12” (30.48cm) from lens 2° duty cycle Max light output: 8300 Lux Color Temp: Internal Mode: Flash Range: Flash Rate Accuracy: Flash Rate Resolution: Run Time: 5-6 hours typical at 6000 FPM, and 2° duty cycle with fully charged batteries Charge Time: 4-5 hours typical with supplied charger Weight: 0.6 lbs. (0.27kg) including batteries Dimensions: 7.75" x 2.75" x 2.3" (197 x 70 x 58 mm) 0.005% of setting or ± last digit 0.01 to 1 FPM (menu selectable), 0.1 FPM resolution above 9,999.99 FPM, 1 FPM resolution above 99,999.9 External Modes: Flash Range: Tachometer Mode: Accuracy: Display Update Rate: Trigger to Flash Delay: approx. 6200°K 30-300,000 FPM (Flashes per minute) 0.5 to 5000Hz 0-300,000 FPM (Flashes per minute) 0 to 5000Hz 30 to 300,000 RPM ±0.005% of reading or ± last digit 0.5 second typical above 120 RPM ~15 µsec External Input: 2.5V to 12V peak pulse 500 nanosec min pulse width, positive or negative edge triggered (menu selectable) Pulse In to Out Delay <0.2µsec Output Pulse: 3V pulse. One pulse per flash in internal mode. Mimics input pulse in external mode Ordering Information Description PLS PLS Kit PLS Kit Plus Pocket LED Stroboscope, universal 115/230 VAC recharger with interchangeable wall plugs, manual and NIST calibration certificate Same as above with die cut foam lined latching carry case Same as PLS Kit above. Also includes ROLS-P Remote Optical Sensor for triggering flash or for use as a laser tachometer Pouch LBC-U BAT-PLS ROS-P ROLS-P T-5 CC-13 Accessories Protective carry pouch with belt hook Lithium Battery Charger 115/230 VAC recharger with interchangeable wall plugs Replacement Li-Ion battery pack Remote Optical Sensor with 1/8” phone plug connector, 8 foot cable and 12 inches of reflective tape Remote Optical Laser Sensor with 1/8” phone plug connector, 8 foot cable and 12 inches of reflective tape T-5 reflective tape, 5 foot roll x 1/2” wide Latching carry case for PLS Contact us: Ph: 800-999-3390 Fax: 603-886-3300 www.monarchinstrument.com Part No. 6235-010 6235-011 6235-012 6280-073 6280-027 6280-074 6180-057 6180-029 6180-070 6280-072 [email protected] 5 Nova-Strobe Xenon Stroboscopes Nova-Strobe x - The standard for high intensity multi-function portable stroboscopes. Models are available with digital displays, battery or AC power, and a useful range of features which provide unmatched performance and value. Four models range from the Nova-Strobe DBX Deluxe, the most versatile battery powered digital stroboscope with internal phase shifting, down to the Nova-Strobe BAX Basic, the most cost effective AC powered digital stroboscope. Both the battery powered Nova-Strobe DBX and AC powered Nova-Strobe DAX provide a range of 30 to 20,000 flashes per minute and an accuracy of ±0.002% of setting. Flash rates are easily adjusted to fractional RPM by a coarse/fine control knob. Individual TTL compatible input and output jacks are provided for ‘daisy chaining’ of multiple strobes, triggering from an external source, or providing a trigger signal to external equipment. Both DBX and DAX provide internal phase shifting to keep the target precisely in view. Both provide x2 and ÷2 capability for distinguishing actual RPM from harmonic frequencies. In addition, 9 user programmable memory flash rates for repetitive measurements and storage of the last flash rate measured are included. Features (all models) Internal rechargeable batteries or AC powered models Internal phase shifting for easy reference target viewing Lightweight (Less than 2.0 pounds) for easy handling Continuous cool operation Tripod mountable Nova Strobe DAX and DBX also add: NIST Traceable Calibration Certificate Tach mode, speed measurement up to 250,000 RPM Power for optional sensors Pulse repeater output Specifications DBX Deluxe Battery Range Flashes/Minute: DAX Deluxe AC 30-20,000 FPM Display: 30-10,000 FPM 0.002% of setting or ± 1 least significant digit / 0.01 FPM Flash Energy/Duration: 230 mJoule up to 3450 FPM / 8-20µsec Average Power-Watts: >13W above 3450 FPM Flash Tube & Life: Tachometer Mode: BAX Basic AC 6 Digit Numeric and 5 Digit Alphanumeric LCD Accuracy/Resolution: External Triggers - in/out: (1/8” (3.5mm) phone jack) BBX Basic Battery High Power Xenon, 100 million flashes typical TTL (24Vdc Max) Input. Provides 3.3Vdc TTL output N/A 5-250,000 RPM -Use with optional remote sensor N/A Programmable Memory: Yes Yes Internal Phase Shift: Yes Yes Operating Time: 2 hours typical @ 1800 FPM Continuous 2 hours typical @ 1800 FPM Continuous Power Supply: Internal NiMH rechargeable batteries 115 Vac, 50-400Hz or 230 Vac, 50-400Hz Internal NiMH rechargeable batteries 115 Vac, 50-400Hz or 230 Vac, 50-400Hz 1.9 lbs. (0.86 kg) 1.5 lbs. (0.68 kg) 1.9 lbs. (0.86 kg) 1.5 lbs. (0.68 kg) Weight: Size (L x W x H): N/A N/A Body: 9” x 3.66” x 3.56” (229 x 93 x 90mm); Reflector Housing: 4.8” (122mm) diameter; Handle: 4.25” (108mm) long Ordering Information Item BAX 115 BAX 115 Kit BAX 230 BAX 230 Kit BBX 115/230 BBX 115/230 Kit DAX 115 DAX 115 Kit DAX 230 DAX 230 Kit DBX 115/230 DBX 115/230 Kit 6 Contact us: Description Basic 115Vac powered xenon Strobe Same as BAX 115 plus latching carry case and spare lamp Basic 230Vac powered xenon Strobe Same as BAX 230 plus latching carry case and spare lamp Basic xenon Strobe, battery powered, with 115/230 Vac recharger with interchangeable plugs Same as BBX 115/230 plus latching carry case and spare lamp Deluxe 115Vac powered Strobe with NIST certificate Same as DAX 115 plus latching carry case and spare lamp Deluxe 230Vac powered Strobe with NIST certificate Same as DAX 230 plus latching carry case and spare lamp Deluxe Strobe, battery powered, with 115/230Vac recharger with interchangeable plugs and NIST certificate Same as DBX 115/230 plus latching carry case and spare lamp Accessories: See page 4 for compatible Nova-Strobe accessories Ph: 800-999-3390 Fax: 603-886-3300 www.monarchinstrument.com Part No. 6206-010 6206-011 6206-012 6206-013 6207-012 6207-013 6203-010 6203-011 6203-012 6203-013 6204-012 6204-013 [email protected] PBX Phaser Strobe The Phaser-Strobe PBX incorporates the unique design features of the Nova-Strobe DBX with an increased operating range of 30 to 50,000 flashes per minute, as well as external phase shifting. The unique digital adjustment knob can select the decade for adjustments so coarse and fine adjustments of flash rates are made quickly and with significantly better resolution than competitive units. The memory feature of the Phaser-Strobe pbx allows nine flash rates to be stored - displayed in flashes per minute or flashes per second. Phaser-Strobe PBX operates with internal rechargeable batteries or continuously from AC line power with the power supply/recharger. Features: Phase Shift adjustable as phase angle or time Virtual RPM mode provides slow motion viewing for high speed events Store and recall nine memory settings TTL compatible input/output jacks NIST traceable certificate included Specifications Flash Range: Accuracy: Digital Adjustment Knob: Flash Rate Resolution: Operating Time: Phase Delay: Time Delay: Virtual RPM (Slow motion): Flash Energy (Typical): Flash Duration (Typical): Average Power: Tachometer Mode: External Input: Trigger Output/Remote Sync: Power: Weight: 30-50,000 FPM (flashes/minute) 0.5-830 FPS (flashes/sec.) (Hz) ±0.002% of setting ± least significant digit 36 detents per revolution and blinking decade selection 0.01 to 1.0 FPM (menu selectable) 2 hours typical @ 1800 FPM or continuous AC power 0.1 to 359.9 degrees 0.01 to 1000 msec. 0-200 VRPM 230 mJoule up to 3450 FPM 8-20 µsec 11W @ 3000 FPM; > 13W @3450 FPM 5-250,000 RPM from external trigger Input pulse - 0.5 µsec min, TTL to 24V max (1/8” phone plug) 3.3V TTL compatible 40 µsec pulse positive/negative Internal rechargeable NiMH batteries with AC power supply/recharger 1.9 lbs. (0.85 kg) including batteries Ordering Information Item PBX 115/230 Description Part No. Strobe with PSC-pbxU 115/230 6210-020 power supply/recharger, manual and NIST certificate. PBX 115/230 Kit Same as above with deluxe water 6210-021 tight foam lined carry case. VBX Vibration Strobe The VBX Vibration Strobe is uniquely designed to provide precise, instantaneous synchronization to a number of data collectors and FFT analyzers triggered by an accelerometer. Built for portable applications, the VBX is the perfect lightweight phase analysis tool. VBX allows for the measurement of phase without stopping the machinery to install reflective tape. Phase analysis is quick and accurate using the filter bandwidth selector and the relative phase adjustment. Unique “Tracking Filter” maintains phase lock to input pulse. VBX can power and be triggered by accelerometers with or without data collectors. Features: Compatible with CSI and SKF analyzers Tracking filter maintains phase lock Direct triggering from accelerometers NIST traceable certificate included Specifications Flash Range: Accuracy: Digital Adjustment Knob: Flash Rate Resolution: Operating Time: Phase Delay: Tracking Filter: Time Delay: Virtual RPM (Slow motion): Flash Energy (Typical): Flash Duration (Typical): Average Power: Tachometer Mode: External Input: Trigger Output/Remote Sync: Power: Weight: Contact us: 30-50,000 FPM (flashes/minute) 0.5-830 FPS (flashes/sec.) (Hz) ±0.002% of setting ± least significant digit 36 detents per revolution and blinking decade selection 0.01 to 1.0 FPM (menu selectable) 2 hours typical @ 1800 FPM or continuous AC power 0.1 to 359.9 degrees Selectable Wide and Narrow Bandwidths. Filter may not lock below 100 FPM 0.01 to 1000 msec. 0-200 VRPM 230 mJoule up to 3450 FPM 8-20 µsec 11W @ 3000 FPM; > 13W @3450 FPM 5-250,000 RPM from external trigger Input pulse - 0.5 µsec min, TTL to 24V max (1/8” phone plug) 3.3V TTL compatible 40 µsec pulse positive/negative Internal rechargeable NiMH batteries with AC power supply/recharger 1.9 lbs. (0.85 kg) including batteries Ph: 800-999-3390 Fax: 603-886-3300 Ordering Information Please visit www.monarchinstrument.com or contact us directly for complete part number and pricing information. www.monarchinstrument.com [email protected] 7 PSX Palm Strobe x Palm Strobe x offers excellent brightness, exceptional features, rugged construction and extra long battery life. Unique one-touch joystick-type button allows single hand operation for fast fractional RPM tuning. Select mode of operation for internal tuning, external TTL pulse input, tachometer display and x2 ÷2 functions. Eight memory positions provide rapid recall of user defined frequencies. The Palm strobe x can be ordered in various configurations to fit the demand of your application. Optional Accessories Patented Features Patented Plug in Battery Pack Easy one hand operation Lightweight Flash rates to 12,500 FPM Protective Rubber Cover Holster Quick Change Battery Pack Tachometer mode from Self Powered Sensors TTL compatible input/output (3.5mm phone plug) NIST Certificate included Specifications Palm Strobe x Deluxe Kit Internal Mode Range: 100 to 12,500 FPM (Flashes per minute) Light Power: 7.9 watts @ 6000 FPM, 150 mJoules up to 3100 FPM Flash Lamp Life: 100 million flashes typical Flash Duration: 10 - 30 µsec typical Display: 6 digit alphanumeric backlit LCD display Flash Rate Resolution: 0.1 FPM Flash Rate Accuracy: Greater of ±0.01% of reading or ±0.5 FPM Tachometer Mode: 5 to 250,000 RPM External Input: 0 to 5 Vdc (12 Vdc max.) TTL compatible, positive edge triggered Output Pulse: 0 to 5 Vdc typical - 350µsec positive pulse (2.5mm) 1/8” phone plug Run Time: 2 hours typical @1800 FPM >1 Hour typical @ 6000 FPM Memory: 8 programmable flash rates and last flash rate at power down Adjustment: Four quadrant tuner button with blinking decade select for flash rate up and down, multiply by 2 and divide by 2 Modes: Internal, External, Tachometer, Preset, x or ÷ by 2, locked on Battery Power: Removable 6Vdc rechargeable NiMH battery pack Recharger: 100-240 Vac, 50/60Hz, includes 4 interchangeable adapters Weight: 1.2 lbs. (0.55 kg) including battery Strobe Dimensions: 3.04 x 9.34” (77 x 237mm) Ordering Information Item Palm Strobe x Palm Strobe x Pak Palm Strobe x Kit Palm Strobe x Deluxe Kit PS Input Cable PS Output Cable PS Holster Rubber Cover 8 Contact us: Description Palm Strobe x, battery pack, PSC-2U 115/230 Vac recharger, NIST certificate and manual Palm Strobe x, 2 battery packs, PSC-2U 115/230 Vac recharger, NIST certificate, manual and holster Palm Strobe x, battery pack, PSC-2U 115/230 Vac recharger, NIST certificate, spare lamp, manual and latching carry case Palm Strobe x, 2 battery packs, PSC-2U 115/230 Vac recharger, NIST certificate, spare lamp, manual and latching carry case Accessories TTL pulse input cable, 6 feet (1.82m) -1/8” stereo plug to BNC male connector TTL pulse output cable, 6 feet (1.82m) -1/8” stereo plug to BNC male connector (CA-4044-6) Holster with belt loop and pouch Protective rubber cover for Palm Strobe x Ph: 800-999-3390 Fax: 603-886-3300 www.monarchinstrument.com Part No. 6205-050 6205-051 6205-052 6205-053 6280-032 6280-037 6280-043 6280-044 [email protected] MVS Machine Vision Strobes The MVS Machine Vision Stroboscopes are designed for fixed installation in any application requiring continuous stroboscopic visual inspection. The MVS is available with xenon or LED light source and both have adjustable pulse width for optimized target illumination. Connect your existing trigger signal or the optional Frequency Controller with LCD. Connect multiple units together using the MVS distribution panel for applications requiring wide illumination area. Use the optional Audio Interface Box and Microphone to create stunning audio driven visual effects. Features Inspection Applications Continuous cool operation Rugged fan cooled aluminum housing Tripod mounting bushing Dependable and versatile 115 or 230Vac input power Printing Textiles Paper Processing Packaging Bottling Special effects Xenon Specifications Range: Flash duration: Light Source: LED 1 - 9000 FPM 10-100 µsecs Xenon flash tube 30 - 500,000 FPM 1-300 µsecs 12 LED array 5670 Lux @ 6000 FPM, 12 inches, 50µsec. pulse width. Max Light 20 watts output: 27,000 Lux 6200°K 5000°K 5 µsecs 9 µsecs 32° to 104°F (0° to 40°C) max 80% Humidity TTL (5 Vdc Max) Input 115 or 230 Vac 50/60Hz 5.75”L x 4.36”W x 5.0”H / 1.5 lbs. Light output: Color Temp: Trigger to Flash Delay: Operating Temp: External Trigger input Input Power Size/Weight: Audio Interface Box MVS Rear Panel Frequency Controller with LCD Range (ppm/Hz): 30-20,000 pulses per minute / 0.5-333 Hz Display: 6 digit numeric and 5 digit alphanumeric LCD with backlight Accuracy/Resolution: 0.002% of setting or ±1 least significant digit / 0.01 PPM Input/Output: Input: TTL (24Vdc max), 1/8” (3.5mm) phone plug connector Output: TTL (3.3Vdc), 1/8” (3.5mm) phone plug connector Output: Threaded DIN connector for direct connection to MVS Strobe. Power for Frequency Controller with LCD provided by MVS when connected. 8 foot cable with connectors included Tachometer Mode: 5-250,000 - Use with optional remote sensors Programmable Memory: Yes Internal Phase Shift: Yes Power Supply: PSC-2U Universal power supply, 115/230 50/60Hz, Supplied with USA, U.K., AUS and Euro adapter plugs. Size/Weight: 5” x 3.5” x 1.5625” / 0.25 lbs. Distribution Panel Microphone Frequency Controller with LCD Ordering Information Model Number MVS 115 MVS 230 MVS LED 115 MVS LED 230 MVS Frequency Controller with LCD MVS Audio Interface Box MVS Audio Microphone MVS Distribution Panel MVS Connection Cable Contact us: Ph: 800-999-3390 Description 115Vac powered MVS Xenon Stroboscope with 8 foot TTL input cable 230Vac powered MVS Xenon Stroboscope with 8 foot TTL input cable 115Vac powered MVS LED Stroboscope with 8 foot TTL input cable 230Vac powered MVS LED Stroboscope with 8 foot TTL input cable Controller with universal power supply and 8 foot cable Interface box with interface cables Audio Microphone with 8 foot cable and mounting hardware Connect up to six (6) MVS strobes in parallel. Includes panel and (2) 8 foot cables 8 foot 3.5mm phone plug to 4 pin DIN connector cable (for connecting MVS to distribution panel) Fax: 603-886-3300 www.monarchinstrument.com Part No. 6250-020 6250-021 6250-022 6250-023 6280-080 6280-081 6280-082 6250-084 6280-085 [email protected] 9 PLT200 Pocket Laser Tachometer The Pocket Laser Tach 200 (PLT200) is a digital, battery-powered portable optical tachometer, which operates up to 25 feet (8 meters) from a reflective target using a class 2 laser light source. The ergonomic design allows safe, direct line-of-sight viewing of both the target and the display at the same time, while providing a non-slip rubber surface for single hand operation. Multifunction Tool The PLT200 is a 32 function Tachometer/Rate meter, Totalizer/Counter and Timer (stopwatch), which is programmable in both Imperial and Metric rates. Includes two phone plug connectors for our optional Remote Contact Assembly (RCA) or remote sensors. The PLT200 also has a TTL compatible pulse output to trigger devices like vibration data collectors or stroboscopes. The KIT is supplied complete with a Remote Contact Assembly including concave and convex tips and a 10 cm linear speed wheel all in a latching carrying case. Sensors and input/output cable are optional. Specifications Features Contact or Non-Contact modes View display and target simultaneously Lightweight Display: 5 Digits, 5 Alphanumeric LCD Range (Optical): 5 to 200,000 RPM (subject to ambient light intensity) Range (Contact): Rates 0.5 to 20,000 RPM (also reads RPS and RPH) 10cm Contact Wheel 12 inch Contact Wheel Operates up to 25 feet from target Use remote sensors View Display and Target TTL input/output (3.5mm phone plug) Ordering Information Item PLT200 PLT200 Kit ROS-P T-5 tape 12” Wheel Description Tachometer, NIST Cert., batteries, 12 inches of T-5 tape Tachometer, NIST Cert., batteries, latching carry case, RCA with tips, linear speed wheel, 5 foot roll of T-5 tape Accessories Remote Optical Sensor (LED) with 8’ cable, 1/8” (3.5mm) phone plug and 12 inches of T-5 tape Reflective tape 5’ roll, 0.5” wide Linear contact wheel with 12” circumference for use with RCA (Remote Contact Assembly) Part No. 6125-010 6125-011 6180-057 6180-070 6580-011 Inch/min 1.969 to 78,740 6.000 to 144,000 Feet/min 0.164 to 6,561.7 0.500 to 12,000 Yard/min 0.055 to 2,187.2 0.167 to 4,000 Cm/min 5.000 to 200,000 15.240 to 365,760 Meter/min 0.050 to 2,000.0 0.153 to 3,657.6 Totalizer: 1-999,990 (events or length) Timer: 99:59.9 Min, sec, tenths Accuracy: Optical: ±0.01% of reading Contact: ±1.0% of reading Resolution: 0.001 to 10 RPM (range dependent) Operating Distance: 2” to 25’ (5cm to 7.62m), ±70° from perpendicular Memory: Max, Min and Last Power: (2) “AA” 1.5Vdc batteries (30 hours) Environmental: 5° to 40° C (40° to 105° F), 80% RH up to 31° C (88° F) Dimensions: 6.92 x 2.4 x 1.6in (17.58 x 6.10 x 4.06cm) Weight: 7 ounces (210 grams) PT-99 Pocket Tachometer The Pocket Tach 99 (PT99) is a digital, battery-powered portable non-contact optical tachometer, which operates up to 36 inches from a reflective target using a bright red LED light source. The ergonomic design allows safe, direct line-of-sight viewing of both the rotating target and the display at the same time, while providing a non-slip rubber surface for single hand operation. The PT99 is the value-leader of the world-class Pocket Tach Series from Monarch. Features Specifications 36 inch operating distance Display: 5 Digits, 5 Alphanumeric LCD One hand operation Range: 5 to 99,999 RPM LED light source Accuracy: 0.01% or ± 1 Digit Simple operation Resolution: Auto ranging: 0.001 to 1 RPM Fixed: 1 Digit Operating Range: 2” to 36” (5cm to 91.44cm), ± 45° from perpendicular Memory: Max, Min and Last Power: (2) “AA” 1.5Vdc batteries (60 hours) Environmental: 5° to 40° C (40° to 105° F), 80% RH up to 31° C (88° F) Dimensions: 6.92 x 2.4 x 1.6in (17.58 x 6.10 x 4.06cm) Weight: 7 ounces (210 grams) Ordering Information Item PT99 10 Description Tachometer with 12 inches of T-5 tape, batteries Contact us: Ph: 800-999-3390 Part No. 6109-010 Fax: 603-886-3300 www.monarchinstrument.com [email protected] ACT Series Panel Tachometers/Totalizers The ACT Series Panel Tachometers consists of two models - one tachometer and one tachometer/rate meter/totalizer. Both feature inputs for two and three wire sensors providing signals of 0-5V TTL or 0-1.1 Vac to 0-50 Vac. Both models operate with all Monarch sensors (see Pages 15-18) and display in fixed or floating decimal point format. The ACT-3X dual channel input provides the best feature set of any panel or bench top instrument available today. Features ACT-3X 5-999,990 RPM ACT-1B 5-99,999 RPM Economically priced Output options: 4-20mA, 0-5Vdc or TTL pulse PM-Remote Software NIST Traceable Calibration Certificate Standard TTL pulse repeater output Optional 4-20mA, 0-5Vdc, and 2 alarm outputs Single event capture from start and stop pulses, in units such as mph, cm/sec, etc. Using two sensors - for linear rate of travel on second input channel Both the ACT-1B and the ACT-3X can be used with the Windows based PM Remote Software to further enhance their capabilities. Use your PC to customize the configuration of the ACT-1B and ACT-3X or view real-time data over the communications interface. PM Remote Software is included with the optional USB Programming Cable for the ACT-1B and the ACT-3X (with standard serial option) and is included with the ACT-3X when ordered with RS232C serial, USB or Ethernet communication options. (See page 14 for full details.) ACT-1B Specifications Speed Range: Accuracy: ACT-3X 5-99,999 RPM ±1 RPM or 0.005% of reading Resolution: Totalizer/Counter: Alarm Capability: Alarm Output: Communications: Scale Factor: Totalize/Count: Input Configuration: Analog Output: Pulse Repeater: Display: Display Update: Dimensions: Input Power: Sensor Power: 5-999,990 RPM (Speeds below 5 RPM Possible with multiple pulses per revolution) ±0.001% of reading or ±1 of displayed value (standard gate) ±0.006% of reading or ±1 of displayed value (fast gate) 1 RPM Up to 0.001 RPM, 10 RPM (100,000 to 999,990 RPM) N/A Display Range: 0.001 to 99,999 N/A Two alarm set points: set as High or Low, latching or non-latching Hysteresis and low limit lockout are programmable N/A Two Form C relay contacts rated 1Amp at 230 Vac, can be set as failsafe Optional (3.5mm phone plug) Standard (3.5mm phone plug), Optional: RS232C, USB type B or Ethernet N/A 0.0001-9999.9 N/A 1-99,999 Universal inputs for all Monarch Sensor or TTL input or 1.5 to 50Vac input Voltage: 0-5Vdc, 5mA max load or Current: 4-20mA, 500Ω max. 1-5Vdc with 250Ω resistor 0-5V TTL compatible. One pulse out for each pulse in. 5 digits, 0.56” (14mm) high red LED 2x per second above 120 RPM 1/8 DIN by 4.5” (114mm) deep Standard: 100-240Vac, 50/60Hz Optional: 12 or 24Vdc ±20%, Isolated, 5 watts 5 Vdc or 12 Vdc or optional 24Vdc to sensor Ordering Information ACT-1B - ACT-3X Input Power 1 100-240Vac 50/60Hz 2 Isolated 12Vdc ±20% 3 Isolated 24Vdc ±20% Input Power 1 100-240Vac 50/60Hz 2 Isolated 12Vdc ±20% 3 Isolated 24Vdc ±20% Pulse Output 0 No 1 Yes Sensor Power 1 12Vdc 2 5Vdc 3 24Vdc Contact us: Analog Output 0 None 1xxxxx 0-5Vdc Non-iso. 2xxxxx 4-20mA Non-iso. 3xxxxx 0-5Vdc isolated 4xxxxx 4-20mA isolated xxxxx = must specify full scale RPM Ph: 800-999-3390 Sensor Power 1 12Vdc 2 5Vdc 3 24Vdc Input Pulses Per Revolution xxx = Specify (001 to 999) Fax: 603-886-3300 Analog Output 0 None 1 0-5Vdc Non-iso. 2 4-20mA Non-iso. 3 0-5Vdc isolated 4 4-20ma isolated www.monarchinstrument.com Alarm Outputs 0 None 1 2 Form C relays rated 1 amp @ 230Vac Communications 0 Standard Serial (phone plug) 1 RS232C (9 pin D shell) 2 USB (Type B) 3 Ethernet (RJ45) BN Modification 0 None 1 Mod. for use w/ Bentley Nevada or eddy probes [email protected] 11 F2A1X Frequency to Analog Converter/Tachometer The F2A1X Frequency to Analog Converter module converts a frequency input signal into a proportional analog voltage (0-5Vdc) or current (4-20mA) output. The output signal is electrically isolated from input signal and input power source effectively eliminating troublesome ground loops. The input signal can be supplied from a Monarch sensor (measuring RPM for example) or any source of digital signal not exceeding 12 volts. The F2A1X is factory preprogrammed with the full scale output and input scale factor of your choice. These settings are also user configurable with the optional USB programming cable and PM Remote Software. PM Remote Software also displays data in real-time. The F2A1X requires 12-24Vdc input power. Features Economically priced Rugged, compact and lightweight Electrically Isolated input/output 5 to 600,000 RPM range (0.1 to 10kHz) Compatible with most speed sensors (TTL) 12 to 24 Vdc input power User configurable* View real-time data on PC* 4-20mA or 0-5Vdc scalable output 5 Vdc or 10 Vdc sensor supply (jumper selectable). *Requires optional USB programming cable and PM Remote Software (see page 12) Specifications Input Range: Accuracy: Resolution: Power Supply: Inputs: Sensor Excitation: Current Output Option: Voltage Output Option: Dimensions: Environmental: Electrical Safety: Ordering Information 0.1 to 10,000 Hz (5 to 600,000 RPM) 0.005% 76 µvolts or 30.5 Nano amps 12 to 24Vdc ±5% @ 150mA max TTL input or ±3Vac to ±12Vac, scaling is programmable using PM Remote Software and USB programming cable 5 Vdc or 10 Vdc @ 75mA (user selectable jumper setting) 4-20mA out, 16 bit resolution. Zero and full scale setting as specified when ordered or programmable using PM remote software and USB programming cable 0-5Vdc out, 5mA 16 bit resolution. Zero and full scale setting as specified when ordered or programmable using PM Remote Software and USB programming cable L x H x W = 80 x 40 x 28mm (3.2 x 1.6 x 1.2”) excluding mounting wings Indoor use only, installation category II per IEC 664 Temperature: -10° to 50°C operating per IEC 61010-1 Humidity: 80% max for temps up to 31°C, decreasing linearly to 50% RH at 40°C Meets EN61010-1:2001, EC low voltage directive 2006/95/EC Configure Model # here: Recommended Sensors (see pages 15-17) Optical ROS-W F2A1X - Input Mode (select input measurement mode) 1 Frequency (Hz/RPS) 2 RPM (Assumes 1 pulse per revolution) 3 Custom (Contact factory or order optional PM Remote Software and USB programming cable, see accessories below). Analog Output 1 0 to 5Vdc, Isolated 2 4-20mA, Isolated Full Scale Output xxx Specify full scale output of analog signal (1 to 600,000) Application Example 1: Convert 0 - 5000 RPM signal to a 4-20mA output Model number = F2A1X-2-2-5000 Application Example 2: Convert a 0 to 8kHz signal to a 0-5Vdc output that is proportional to 0 to 200,000 GPH (Gallons Per Hour) Model number = F2A1X-1-1-200,000 12 Contact us: Ph: 800-999-3390 Fax: 603-886-3300 Infrared - IRS-W Laser - ROLS-W PM Remote Software More advanced setups such as multiple input pulses per revolution, elevated zeros and custom scale factors can be accomplished using the advanced setup capabilities of PM Remote Software and USB Programming Cable which can be ordered separately (See page 14 for details). Item USB Prog. Cable/Sftwr. Description Part No. 3 Ft. USB Programming Cable and Windows™ compatible 6180-031 PM Remote Software package. Allows user configuration of operation mode, analog output scaling, decimal places, display update rate and pulses per input. View real-time data in digital format and/or through Microsoft® Excel. www.monarchinstrument.com [email protected] F2A3X Frequency to Analog Converter/Tachometer The F2A3X Frequency to Analog converter is a DIN rail module that converts a frequency input signal into a proportional analog voltage (0-5Vdc) or current (4-20mAdc) output. The output signal is electrically isolated from input signal and input power source effectively eliminating troublesome ground loops. The input signal can be supplied from a Monarch sensor (measuring RPM for example) or any source of digital signal not exceeding 12 volts. The F2A3X is completely user programmable using the included PM Remote Software (see full features on page 12). Features Standard DIN rail mounting Ethernet communications available 5 to 999,990 RPM range (0.083 to 250kHz) Compatible with most speed sensors (TTL) 12 to 24 Vdc input power Pulse repeater output User configurable View real-time data on PC 4-20mA or 0-5Vdc scalable output 10 Vdc or 5Vdc sensor excitation Alarm set point with optional relay output Specifications Input Range: Input Configuration and Voltage Range: Analog Output: Accuracy/Resolution: Output Update: Memory: Dimensions: Input Power: Sensor Excitation: Pulse Repeater Output: Communications: Alarm Capability: Alarm Outputs: Alarm Reset: Environmental: Electrical Safety: 5-999,990 RPM speeds below 5 RPM possible with multiple pulses per revolution (0.083 Hz to 250 KHz) 1 to 9,999 pulses per revolution or use a scale factor of 0.0001 to 99,999—PC software programmable, TTL input and 1.1V to 25Vdc signals-Internal Jumper for : ±1 to ±25Vac Voltage: 0-5Vdc, 5mA max load, Isolated or 4-20mA Isolated, 500Ω max load, Internal 12V compliance voltage. 16 bit resolution. Full scale and offset RPM ranges PC programmable 0.005% of full scale output / 76 µvolts or 30.5 Nano amps Software selectable up to 244 times/sec-dependent on input frequency Maximum and minimum recall via PC software 1/8 DIN by 3.94” (100mm) deep Standard 12-24Vdc 4.5W max or optional 12Vdc to 24Vdc isolated 4.5W max 10Vdc @ 60mA standard or optional 5Vdc @ 60mA 0-5V TTL compatible, one pulse out for each pulse in. Polarity is software selectable Standard: serial-requires USB interface cable, Optional: Ethernet RJ45 or USB type B Optional alarm with relay output - Set points: High or low alarm limit, latching or non-latching. PC Programmable 1 Form C relay contact, rated 1A at 115Vac or 230Vac Automatic or manual reset. Front panel push button or remote reset via PM Remote Software Indoor use only, installation category II per IEC 664 Temperature: -10° to 50°C operating per IEC 61010-1 Humidity: 80% max for temps up to 31°C, decreasing linearly to 50% RH at 40°C Meets EN61010-1:2001, EC low voltage directive 2006/95/EC Ordering Information Configure Model # here: F2A3X - Recommended Sensors (see pages 15-17) Optical - ROS-W Input Power 1 12-24 Vdc Non. Isol. 2 12-24 Vdc Isolated Laser - ROLS-W Magnetic - MT-190W Optical - ROSM-5W Infrared - IRS-W PM Remote Software F2A3X is completely user configurable with included PM Remote Software (See page 14 for details). Sensor Power 1 10-12 Vdc 2 5 Vdc Analog Output 1 0-5 Vdc Isolated 2 4-20mA Isolated Contact us: Optical - ROS-HT-W-25 Communications 1 USB Type B 2 Ethernet (RJ45) Ph: 800-999-3390 Alarm Output 0 None 1 1 Form C Relay Fax: 603-886-3300 Bentley Nevada Mod 0 None 1 Modification to support use of Bentley Nevada or Eddy style probes www.monarchinstrument.com [email protected] 13 PM Remote Software PM Remote Software is a Windows™ based software application that allows users to quickly and easily customize the configuration of the ACT-1B, ACT-3X, F2A1X and F2A3X. Set the mode of operation to RPM, RPS or Frequency and select the input scale (pulses per revolution). Real-time data can be displayed directly on the PC along with Min and Max values. Decimal places and display update rate are user configurable. Features Allows quick set up of ACT-1B, ACT-3X, F2A1X and F2A3X Display live data remotely on PC Unit configurations can be saved for reloading in the future. Communications Set-up Programmable Features Alarm Set-up ACT-1B ACT-3X F2A1X F2A3X X X X X X X X X X X X X X X X X X X X X X X X F2A3X Mode of operation (RPM, RPS, Hz, etc.): Channel 2 mode: Input pulses per revolution: Output scale: Pulse output (pos. or neg.): Decimal places: Alarms (set points, type and logic): Input signal trigger (pos. or neg.): Real-time PC display: X X X X X X Communications* Serial Programming port** USB Type B Ethernet RS232 Advanced Set-up ACT-1B ACT-3X F2A1X Standard Standard Optional Optional Optional Standard Standard Optional *Only one communications option may be selected per unit. ** USB Programming Cable must be purchased separately. USB Programming Cable w/PM Remote Software Real-Time PC display Ordering Information PM Remote Software is a freeware program that is included when you purchase a F2A3X frequency converter or ACT-3X panel tachometer (with USB, Ethernet or RS232 communications port option). It is also included with the optional USB Programming Cable which is compatible with the ACT-1B, ACT-3X (with standard comms option) and the F2A1X. Compatible with Windows (32 and 64bit) operating systems. Item USB Programming Cable 14 Contact us: Description 3 Ft. USB Programming Cable and Windows™ compatible PM Remote Software Ph: 800-999-3390 Fax: 603-886-3300 www.monarchinstrument.com Part No. 6180-031 [email protected] ROS Remote Optical Sensor ROS (Remote Optical Sensor): Threaded stainless steel remote optical sensors have a visible red LED light source and green LED ‘On Target’ indicator. Performs over a wide speed range and operating envelope. Common usage: Wide range of general purpose applications in relatively clean environments. Specifications Operating Distance: Speed Range: Operating Temperature: Power Input: Output Signal: Standard Cable: Dimensions: 3 feet (1 m) and 45° from reflective tape 1-250,000 RPM -14° to 158°F (-10 to 70°C) 3.3 to 15Vdc @ 45mA TTL same as source 8 feet (2.4m) 2.9” (L) x 0.625” diameter (73 x 16mm) Ordering Information Item ROS-W ROS-P ROS-P-25 Description Sensor with 8 ft. cable with tinned leads, mounting bracket and 12” of T-5 tape Sensor with 8 ft. cable, 1/8” phone plug, mounting bracket and 12” of T-5 tape Sensor with 25 ft. cable, 1/8” phone plug, mounting bracket and 12” of T-5 tape Part No. 6180-056 6180-057 6180-057-25 ROS-HT Remote Optical Sensor - High Temp ROS-HT (Remote Optical Sensor, High Temp): Threaded stainless steel remote optical sensor with visible incandescent white light source. Ideal for automotive and truck cooling system testing up to 257°F (125°C). Common usage: Automotive and heavy truck cooling fan speeds. Specifications Operating Distance: Speed Range: Operating Temperature: Power Input: Output Signal: Standard Cable: Dimensions: 2 feet (61cm) and 45° offset from target 1-50,000 RPM -13° to 257° F (-25° to 125°C) 6-24Vdc, 40mA TTL same as source 25 feet (7.6m) 2.9” (L) x 0.625” diameter (73 x 16mm) Ordering Information Item ROS-HT-W-2 Description Sensor with 25 ft. cable with tinned leads , mounting bracket and 12” of T-5 tape Part No. 6180-058-25 ROLS Remote Optical Laser Sensor ROLS (Remote Optical Laser Sensor): Threaded stainless steel remote optical laser sensors have a visible red laser light source and green LED ‘On Target’ indicator. Performs over a wide speed range and operating envelope. Common usage: Wide range of applications where distance to target is large. Specifications Operating Distance: Speed Range: Operating Temperature: Power Input: Output Signal: Standard Cable: Dimensions: Contact us: Up to 25 feet (7.62m) and 70° offset from target 1-250,000 RPM 14° to 158°F (-10° to 70°C) 3.3 to 15Vdc, 35mA TTL same as source 8 feet (2.4m) 3.12” (L) x 0.71” (M16 x 18 x 79.4mm) Ph: 800-999-3390 Ordering Information Item ROLS-W ROLS24-W ROLS-P Fax: 603-886-3300 Description Sensor with 8 ft. cable with tinned leads, mounting bracket and 12” of T-5 tape Same as above with 24Vdc input power Sensor with 8 ft. cable , 1/8” phone plug, mounting bracket and 12” of T-5 tape www.monarchinstrument.com Part No. 6180-030 6180-035 6180-029 [email protected] 15 IRS Infrared Sensor IRS (Infrared Sensor): Ideal sensor for working up to 0.5” (12mm) from high speed equipment or other applications providing only contrasting light and dark surfaces or beam interruption by solid objects as small as 0.30” (1mm). Common usage: Dentist and other high speed drills, slots or gear teeth. Does not require reflective tape. Use black/white contrasting colors. Specifications Ordering Information Item IRS-P IRS-W Description Sensor with 8 ft. cable with 1/8” phone plug connector and mounting bracket Sensor with 8 ft. cable with tinned lead and mounting bracket Part No. 6180-020 6180-021 Operating Distance: Speed Range: Operating Temperature: Power Input: Output Signal: Standard Cable: Dimensions: 0.5” (12mm) 1-999,990 RPM -40° to 185°F (-40° to 85°C) 3.3 to 15Vdc, 40mA TTL same as source 8 feet (2.4m) 2.9” (L) x 0.625” diameter (73 x 16mm) M-190 Magnetic Sensor M-190 (Magnetic Sensor): Most popular sensor for use with 60 tooth 20 pitch gears. Sensor mounts within 0.005 inches (0.127mm) of a minimum 0.1 inch (2.5mm) target. Requires no power from the display module and self-generates an AC signal. Common usage: Ferrous metals, primarily gear teeth. Specifications Ordering Information Item M-190-W Description Sensor with 8 ft. cable with tinned leads Part No. 6180-012 Operating Distance: Speed Range: Operating Temperature: Power Input: Output Signal: Standard Cable: Dimensions: 0.005” (0.127mm) gap w/ 0.1” target (2.5mm) min. 1-99,999 RPM -100° to 225°F (-73° to 107°C) None (self generating) 190V Peak to Peak 8 feet (2.4m) 2.0” (L) x 0.625” (50 x 16mm) MT-190 Magnetic Sensor/Amplifier MT-190 (Magnetic Sensor with Amplifier): Extends operating gap to 0.25 inches (6.35mm) from the target. Frequently used on gears as the M-190, but can also sense bolt heads or shaft keys and provides a TTL output signal that is equal to the source voltage. Common usage: Ferrous metals including bolt heads or shaft keys for on-line systems. Specifications Ordering Information Item MT-190W MT-190P 16 Description Sensor with 8 ft. cable with tinned leads/Amplifier with tinned leads Sensor with 8 ft. cable with tinned leads/Amplifier with phone plug connector Contact us: Ph: 800-999-3390 Fax: 603-886-3300 Part No. 6180-037 6180-036 Operating Distance: Speed Range: Operating Temperature: Power Input: Output Signal: Standard Cable: Dimensions: www.monarchinstrument.com 0.25” (6.35mm) gap with 0.1” target (2.5mm) min. 1-99,999 RPM -100° to 225°F (-73° to 107°C) 3.3 to 12Vdc, 15mA TTL same as source 8 feet (2.4mm) 2.0” (L) x 0.625 diameter (50 x 16mm) [email protected] GE-200HP Inductive Gasoline Engine Sensor GE-200HP: Ideal sensor for detecting gasoline engine RPM. Up to 12 inch (304mm) working distance from ignition coil or magneto. Common usage: 2-cycle and 4-cycle gasoline/petrol engines. Specifications Operating Distance: Speed Range: Operating Temperature: Power Input: Output Signal: Standard Cable: Dimensions: Up to 12 inches (304mm) 200-30,000 RPM 0° to 175°F (-18° to 80°C) 3.3 to 24Vdc, 4mA TTL same as source 15 feet (4.5m) 2.16” (L) x 0.82” diameter (55 x 21mm) Ordering Information Item GE-200HP Mag Amp Mag Amp Description Electromagnetic inductive spark plug sensor with 15 feet of cable. Amplifier module required for proper operation Amplifier for GE200 HP Sensor. 3 ft. cable with 1/8” phone plug Amplifier for GE200 HP Sensor. 3 ft. cable with tinned leads Part No. 6180-014 4180-405 4180-406 P5-11 Proximity Sensor P5-11: A two wire probe style inductive sensor for use up to 0.2 inches (5mm) from 0.5 inch (12mm) metallic target such as bolt head or shaft locking key. Common usage: Permanent installation in harsh industrial environments. Specifications Operating Distance: Speed Range: Operating Temperature: Power Input: Output Signal: Standard Cable: Dimensions: 0.2” (5mm) from 0.5” (12mm) metal target 1-60,000 RPM -4° to 140°F (-20° to 60°C) 5.0 to 24Vdc, 3mA Namur (DIN 19 234) 6 feet (1.8m) 1.3” (L) x 0.43” diameter (32 x 11mm) Ordering Information Item P5-11 Description Proximity sensor with 6 ft. cable Part No. 6180-013 PS-12 Proximity Sensor PS-12: A three wire threaded IP67 metal sensor outputs an open collector PNP pulse. Operates at a 0.15 inch (4mm) gap with a .45 inch (12mm) target. Includes red LED on target indicator. Common usage: Permanent installation in harsh industrial environment. Online vibration data collectors. Specifications Operating Distance: Speed Range: Operating Temperature: Power Input: Output Signal: Standard Cable: Dimensions: Contact us: 0.15” (4mm) from 0.5” (12mm) metal target 1-24,000 RPM -13° to 167°F (-25° to 75°C) 6 to 36Vdc, 15mA PNP Open Collector 6 feet (1.8m) 2.0” (L) x 0.48” diameter (50 x 12mm) Ph: 800-999-3390 Ordering Information Item PS-12 Fax: 603-886-3300 Description Proximity sensor with 6 ft. cable www.monarchinstrument.com Part No. 6180-032 [email protected] 17 SPSR Self Powered Sensor The unique Self-Powered Sensor (SPSR) provides a TTL compatible pulse output from any of four input sensors: ROLS-P, ROS-P, IRS-P or MT-190P (See pages 15-16 for details). The TTL compatible pulse output is switch selectable as either positive going 0-5V pulses or negative going 5-0V pulses provided on a BNC connector. Internal rechargeable batteries provide 40 hours of operation between charges. For continuous operation, all SPSR configurations can be powered by 115Vac, 230Vac or 9-15Vdc. Selfpowered sensors are a critical element for providing one TTL pulse per revolution for vibration analyzers, spectrum analyzers, stroboscopes, data acquisition equipment, tachometers, balancers, waveform analyzers and magnetic tape recorders. Ordering Information Specifications Range (RPM): Output Signal: Pulse Width: Output Connector: Power: Same as sensor TTL 0-5V or 5-0V (user selectable polarity) Determined by size of target and rotational speed BNC connector Rechargeable NiMH batteries, 40 hours or continuous with 115/230 Vac supply/recharger or optional 9-15Vdc (cigarette lighter adapter) Item SPSR-115/230 SPSR-IM Description SPSR interface module, PSC-2U, ROS-P and 12 inches of T-5 tape SPSR interface module, PSC-2U Part No. 6150-020 6150-021 CSLS Compact Smart Laser Sensor The Compact Smart Laser Sensor (CSLS) is a self-contained optical sensor intended to be used to make non-contact speed measurements from rotating targets at distances up to 65 feet (19.8 m). The sensor has both digital pulse and analog outputs to provide non-contact reference points to balancing equipment or signals to a vibration analyzer. The sensor will track surface irregularities on rotating shafts and provide pulse outputs from reflective tape, contrasting colors and keyways. The sensor is IP64 rated and is suitable for use in dusty damp environments. Specifications Optical: Operating Range: Speed Range: Output Signal: Class 3R (per IEC 60825-1) visible laser 650nm @ 3mW peak power Up to 65 feet (19.8m) from T-5 reflective tape 1-500,000 RPM TTL 0-3.0V typical (positive going pulse) Operating Temp: Dimensions: Power: 32° to 104°F (0° to 40°C) 5.41(L) x 2.35(W) x 2.14(H) (13.74 x 6.43 x 5.43mm) 5Vdc ±5% @ 30mA max Ordering Information Item CSLS Description Compact Smart Laser Sensor, 6 foot power/output cable and 12 inches of T-5 tape Part No. 6180-038 SLS Smart Laser Sensor The Smart Laser Sensor (SLS) is an internal battery-powered optical speed sensor utilizing a visible Class 3R Laser for a TTL pulse output. Operating range up to 65 feet (19.8 m) with reflective tape and up to 3 feet (1 m) from contrasting color targets, keyways, bolt heads or blades. Features • • • Specifications Optical: Operating Range: Speed Range: Output Signal: Operating Temp: Dimensions: Mounting: 18 Contact us: “Smart” auto gain provides best performance in picking up target reflections TTL pulse output signal inverter switch Manual sensitivity knob provides dynamic fine tuning of sensor response Class 3R (per IEC 60825-1) visible laser 650nm @ 3mW peak power Up to 65 feet (19.8m) from T-5 reflective tape 1-500,000 RPM TTL 0-5 or 5-0V (user selectable polarity), RS232 32° to 104°F (0° to 40°C) 5.41(L) x 2.35(W) x 2.14(H) (13.74 x 6.43 x 5.43mm) ¼-20 UNC bushing for tripod Ph: 800-999-3390 Fax: 603-886-3300 Ordering Information Item SLS 115/230 Description Smart Laser Sensor with 115/230 VAC universal power supply/ recharger BNC cable, 12 inches of T-5 tape and NIST certificate www.monarchinstrument.com Part No. 6180-022 [email protected] DataChart™ 1250 Dual Channel Recording Tachometer The DataChart™ 1250 is a feature rich data acquisition system offering 2 universally configurable inputs for measuring DC voltage, DC current, thermocouples and RTD’s as well as frequency and pulse inputs. 4 internal alarm set points, 2 alarm relay outputs and 1 digital control input are all standard. A maximum sample storage rate of 100 samples per second can be set for both channels allowing for capture of short duration process signal anomalies. CompactFlash™ cards up to 2 Gigabytes in size can be used allowing many data points to be stored over long periods of time. The DC1250 can be used in conjunction with many of Monarch’s speed measurement sensors. Power for sensors is provided from the DC1250 rear terminals. Measure, display and record RPM ranges from 5 - 600,000. Choose the sensor best suited for your application or take your existing signal directly into the DC1250. Specifications (abbreviated) Input Power: 9 Vdc ±0.5Vdc @ 5VA (depends on external loads) provided by external AC wall transformer, non-isolated. 100-240Vac 50/60Hz Isolated 12-24 Vdc input power available (not compatible with internal battery Option: pack option below) Internal battery pack provides uninterrupted operation and controlled shutdown Option: during blackout. 6Vdc, 2400mAH NimH No. of Channels: 2 universal, user selectable Isolation: 300V AC/DC channel input to chassis ground Input Types: DC Voltage: Ranges: 0-250mV; 0-1.25V; 0-2.5V; 0-5V; 0-12.5V; 0-25V Accuracy: 0.1% of reading Resolution: 0.025% of full scale DC Current: Ranges: 0-20mA; 4-20mA; 0-50mA; 10-50mA Accuracy: 0.1% of reading excluding 250 ohm external shunt (required) Resolution: 0.025% of full scale Frequency Input: Range: 0-10,000 Hz / 0 - 600,000 RPM Accuracy: Freq: ±1 Hz; RPM: ±1 RPM below 9,999: ±10 RPM above 9,999RPM Input: Low <1.0Vdc; High >3.0 <12.0Vdc Pulse Width: 10 microsecond minimum Input Impedance: >100K ohms Measure Rate: Up to 100 samples/second per channel Math Functions: Y = mx + b, average, hi peak, low peak, and totalization Media: CompactFlash™ up to 2GB size max. LCD graphics, 160 x 80 pixels, black FSTN with white LED backlight. User controlled Display: backlight level and contrast adjust User Interface: 5 button keypad (dual function buttons) Clock: Auto leap year and daylight savings adjustment. Internal battery back-up Relay Outputs: Two alarm outputs: 30V 0.25A Form A relays Voltage Output: 2 outputs 5Vdc @ 50mA to power external sensors Control Input: One input, 5 to 12Vdc activation @ 10mA typical Audible: Internal beeper (multiple tones). Front panel: 96mm x 96mm (1/4 DIN) x 152mm Dimensions: (3.78 x 3.78 x 6 inches) Standard: 1. Choose Input Power ROS-W Ordering Information DC1250 3. Choose Communications Configure Model # here: 0 None 1 USB Comms. Mini-USB port for downloading data directly to PC. Front access. 2 Ethernet 10/100 BaseT Rear access RJ45 connector. Allows network access to recorder. 2. Choose backup AC Adapter 100-240Vac wall adapter with interchangeable plug set 0 None D DC Input Power 12-24Vdc isolated input power 1 Battery Backup* Contact us: IRS-W Temperature Inputs Thermocouple: Range °C Range °F J -100 to 760°C ±2° -148 to 1400°F ±3° K1 -100 to 1000°C ±2° -148 to 1832 °F ±3° K2 0 to 1370°C ±2° 32 to 2498 °F ±3° T -240 to 400°C ±2° -400 to 750°F ±3° E -80 to 400°C ±2° -112 to 750°F ±3° Accuracy: 0.3% of full scale (typical) Ambient temperature sensor accuracy : ±1.5°C RTD (2 or 3 wire): Range °C Range °F 100 ohm Pt 385 -100 to 750°C -148 to 1380°F 100 ohm Pt 392 -100 to 750°C -148 to 1380°F Accuracy: 0.3% of full scale (typical) Resolution 0.1°C Internal current source: 1mA U Universal Item Navigator CFCR MAS250R NIST-1250 THP-W MC1024MBCF MC2048MBCF MT-190W Rechargeable NiMH battery pack will operate recorder up to 6 hours in the event of power loss *Not available with Option “D” DC input power Description Windows XP, Vista, 7 compatible Software for graphic analysis, printing, transfer and exporting CompactFlash™ card reader , USB 2.0 compatible 250 ohm precision resistor for current inputs. 0.1%, 0.5 watt NIST traceable calibration with data Temperature Humidity Probe with 8 foot cable 1 Gigabyte CompactFlash™ card 2 Gigabyte CompactFlash™ card Ph: 800-999-3390 Fax: 603-886-3300 www.monarchinstrument.com Part No. 5380-260 5380-102 5380-151 6380-CAL-2 5380-505 4380-165 4380-166 [email protected] 19 Portable USB Temperature/Humidity Probe/Data Logger The Portable USB Temperature and Humidity Probe combines high accuracy temperature and humidity sensors into a rugged stainless steel probe with built in USB interface. The probe can be used with Windows based PC’s or Android devices that support On-The-Go communications. To use with an Android device simply download the free App from Google Play, plug the probe into your device with the supplied interface cables and start the application. The probe receives its power from the host USB device. Real time data is displayed and can be stored for review on the PC using a spread sheet or review data graphically using our free Track-It™ data logger software. Available in 12” or 18” (300mm or 450mm) lengths. The probe comes standard with a free flow Delrin cap. Optional sintered stainless steel filter caps are available for measuring dry bulk material or for use in dusty/dirty environments. Features Typical Uses Rugged stainless steel construction 6.5’ (2 meter) USB cable included Android On-The-Go cable included High accuracy and repeatability Dew point calculation HVAC spot checking Dry bulk material measurement Environmental chambers Android device not included Laboratories Storage facilities App and Software The Portable Temperature Humidity Probe includes a suite of free software products that enhance your ability to measure, record, analyze, trend and print historic data. Begin by installing and using either the THScan code or Download free Android App here: https://play.google.com/store/apps/details? id=com.trackit.thProbe&hl=en Probe Android App or the TH Probe PC Software. View and record real time digital temperature, humidity and dew point data and then use our free Track-It™ data logger software to view historic data in graphic format. THProbe PC Software Download Track-It Software here: http://monarchinstrument.com/Software/ Track-It_Software.zip Download the free PC software here: www.monarchinstrument.com/Software/ THProbe_Software.zip Android App Track-It™ Software Specifications Temperature Optional Stainless Steel Filter Caps Parameter Conditions Range: Units -40 to 85* Accuracy: 0 to 100 Output: °C -40 to 185* °F ±0.2 °C ±0.4 °F Serial USB Ordering Information *Range applies to sensor end of probe only Part No. 6184-010 Relative Humidity Parameter Conditions Range: Accuracy (@25°C): 10 to 90 Repeatability: Response: Tau at 63%* Units 0-100 %RH ±1.2 %RH ±0.1 %RH 10 Sec 6184-010-CAL 6184-011 6184-011-CAL 6184-901 6184-902 6184-910 Description 12” Temperature/Humidity probe with 2 meter USB interface cable and Android On-The-Go cable 12” Probe above with N.I.S.T. Calibration Certificate 18“ Temperature/Humidity probe with grip, 2 meter USB interface cable and Android On-The-Go cable 18” Probe above with N.I.S.T. Calibration Certificate Sintered filter cap (30-45 micron) Sintered filter cap (60-90 micron) Protective carry case for USB Temp/Humidity probe *With standard slotted cap Contact us: Ph: 800-999-3390 Fax: 603-886-3300 www.monarchinstrument.com [email protected] 20 Examiner 1000 Vibration Meter The Examiner 1000 overall vibration meter and electronic stethoscope is the ideal tool for cost effective predictive maintenance. This meter is simple to operate with only one button and volume adjustment. Troubleshoot bearings and lubrication with the digital LCD and stethoscope features to enhance machinery reliability. Compare your vibration results by using the ISO 10816 Severity Chart right on the meter. NIST traceable calibration is available. Features Electronic stethoscope - troubleshoot while listening to the bearing Measure vibration in: Acceleration - perfect for high speed applications Velocity - in English or Metric per ISO 10816 Acceleration Envelope - high pass filter method Facilities that establish a predictive maintenance program are able to: Improve machinery reliability and reduce unplanned failures Reduce maintenance costs Optimize machinery performance to increase productivity Lower energy consumption-less vibration usually means less friction Extend bearing service life Why Measure Vibration? Vibration is considered the best operating parameter to judge dynamic conditions such as balance (overall vibration), bearing defects (enveloping) and stress applied to components. Many machinery problems show themselves as excessive vibration. Rotor imbalance, misalignment, mechanical looseness, structural resonance, soft foundation, and gear mesh defects are some of the defects that can be measured by vibration. Measuring the “overall” vibration of a machine, a rotor in relation to a machine or the structure of a machine, and comparing the measurement to its normal value (norm) indicates the current health of the machine Vibration Severity Per ISO 10816-1 Specifications Amplitude Ranges: Acceleration: 0.01 to 19.99g (RMS) Velocity: 0.01 to 19.99 in/sec (RMS) Machine 0.1 to 199.9 mm/sec (RMS) Envelope: 0.01 to 19.99 ge (PEAK) Overall: 10 Hz to 10 kHz Envelope: 0.5 kHz to 10 kHz Display Indications: LCD 3.5 digit with Measurement, Hold and Low Battery Vibration Sensor: Piezoelectric Accelerometer 100 mV/g Output: Audio: (3.5 mm) mini plug Sensor Power: 12 Vdc Vibration Velocity Vrms Frequency Ranges: In/s mm/s 0.01 0.28 0.02 0.45 0.03 0.71 0.04 1.12 0.07 1.80 0.11 2.80 0.18 4.50 0.28 7.10 Power: (2) “AA” cell batteries Operating Time: 20 hours continuous without phones 0.44 11.2 Environmental: -14 to 122°F (-10 to 50°C) 0.71 18.0 Dimensions: 6.3 x 3.3 x 1.25” (1.52 x 83 x 32 mm) 1.10 28.0 Weight: 2.85 lbs. (1.30 kg) 1.77 45.0 Class I Small Machines Class II Medium Machines Class III Large rigid foundation Class IV Large soft foundation Good Satisfactory Unsatisfactory Unacceptable Ordering Information Item Examiner 1000 Contact us: Description Overall vibration meter and electronic stethoscope. Includes: Vibration meter, batteries, accelerometer and integrated cable, magnetic base, stinger probe, stereo headphones, field carrying case, owners manual and machinery data worksheet. Ph: 800-999-3390 Fax: 603-886-3300 www.monarchinstrument.com Part No. 6400-011 [email protected] 21 Corporate History “Innovation in Instrumentation” Monarch International, Inc. was founded in 1977 as a sales and service organization for a diverse range of instrumentation. In 1982, the Monarch Instrument Division was established to manufacture and market the first microprocessor based portable tachometers. In 1992, Monarch introduced the DataChart™ Paperless Recorder. Today, we offer a wide range of technical capabilities and competitive pricing throughout the DataChart™ product line to include color touchscreens and multi-channel recorders. The Track-It™ Data Logger line was introduced in 2010. New and innovative models are being added continuously. “Innovation in Instrumentation” is the Monarch design philosophy and in recent years we have introduced state-of-the-art products: Nova-Pro™ Stroboscope/Tachometer PLS Pocket LED Stroboscope Track-It™ Indicating Pressure/Temp Logger Track-It™ RFID data loggers DataChart™ 6000 Paperless Recorder Monarch Instrument remains committed to innovations and quality in sales, customer service and manufacturing. Monarch International’s 30,000 square-foot facility in Amherst, New Hampshire, USA With the addition of new models of tachometers and the introduction of the Nova-Strobe Series of portable stroboscopes in 1990, Monarch rapidly became the worlds’ largest supplier of rotational speed measuring instrumentation and stroboscopic inspection equipment. Our full service sales force and world-wide distribution network stands ready to answer purchase and product application questions. Please feel free to contact us via our toll free number, website, e-mail or fax. We offer a comprehensive line of precision products and calibration services, all with the convenience of the Internet. Monarch Instrument is a ISO9001:2008 certified facility. Please visit our website to locate a distributor in your area. www.monarchinstrument.com or scan code Visit our website to see our complete range of products: Track-It™ Pressure Loggers Portable Tachometers Track-It™ Data Loggers DataChart™ Paperless Recorders Panel Tachometers Speed Sensors Frequency Converters Portable Strobes Proudly distributed by: Monarch Instrument pursues a policy of continuous product development and improvement. The specifications in this document may therefore be subject to change at any time without notice. © Monarch Instrument 2016. Monarch Instrument, 15 Columbia Drive, Amherst, NH 03031 Printed in the USA 08/2016 TJF 3K Contact us: Ph: 800-999-3390 Fax: 603-886-3300 www.monarchinstrument.com [email protected]
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021