null  null
DE 600 | Hf Compression drivers
1.4” high frequency compression driver, titanium diaphragm,
2.5” flat aluminium wire voice coil, low distortion, extremely
good response from 1.2 kHz. to 18 kHz.
Specifications1
Throat Diameter
Nominal Impedance
Minimum Impedance
Power Handling
(1200 –20000 Hz)
Nominal2
Continuous Program3
Sensitivity (1W/1m)4
Frequency Range
Recommended Crossover5
Voice Coil Diameter
Winding Material
Inductance
Diaphragm Material
Flux Density
B&C
Horns
Pagina 1
HF Compression drivers
15:34
Coaxials
7-01-2005
Speakers
Progetto3
36 mm. (1.4 in.)
8Ω
7.6 Ω
80 W
160 W
108 dB
1 – 18 kHz
1.2 kHz
65 mm. (2.5 in.)
Aluminium
0.15 mH
Titanium
1.75 T
Also available in 16 Ω, data upon request
Mounting and Shipping Informations
Two M6 holes 180° on 76 mm. (3 in.) diameter
Three M6 holes 120° on 57 mm. (2.2 in.) diameter
Overall Diameter
156 mm. (6.1 in.)
Depth
65 mm. (2.5 in.)
Net Weight (1 unit)
4.3 Kg. (6.4 lb.)
Shipping Weight (2 units)
9.2 Kg. (20.2 lb.)
Shipping Box (2 units)
210x210x190 mm.
(8.3x8.3x7.5 in.)
1 Driver mounted on B&C ME 90 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range . Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal
rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 1000 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.
1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement