Sophos Mobile Control Administrator guide
Mainos
Mainos
Sophos Mobile Control
Administrator guide
Product version:
2
Document date:
December 2011
Contents
1 Glossary .............................................................................................................................................................. 3
2 About Sophos Mobile Control .......................................................................................................................... 4
3 Prerequisites ....................................................................................................................................................... 6
4 Login ................................................................................................................................................................... 7
5 Overview ............................................................................................................................................................. 8
6 Common elements ........................................................................................................................................... 13
7 Wizards ............................................................................................................................................................. 19
8 Task view .......................................................................................................................................................... 20
9 Inventory .......................................................................................................................................................... 23
10 Provisioning ..................................................................................................................................................... 28
11 Applications ..................................................................................................................................................... 29
12 Configurations ................................................................................................................................................. 32
13 Command bundles .......................................................................................................................................... 34
14 Backup .............................................................................................................................................................. 36
15 Task bundles .................................................................................................................................................... 37
16 Traffic counter ................................................................................................................................................. 38
17 The Sophos Mobile Control Self Service Portal ............................................................................................ 39
18 Troubleshooting .............................................................................................................................................. 40
19 Technical support ............................................................................................................................................ 41
20 Legal notices ..................................................................................................................................................... 42
www.utimaco.com
Administrator guide
1
Glossary
Term
GPRS network
UMTS/3G network
IMEI
OTA
SMS
APNS
C2DM
BES
OMA DM
OMA DS
MDM
PDA
Explanation
Mobile network for packet-oriented data transmission
Mobile network for packet-oriented data transmission
International Mobile Equipment Identity, unique serial number of a mobile device
Over-The-Air
Short Message Service
Apple Push Notification Service
Google Android Cloud-to-Device-Management Push Notification Service
RIM BlackBerry Enterprise Server
Open Mobile Alliance Device Management
Open Mobile Alliance Data Synchronization
Mobile Device Management
Personal Digital Assistant
3
3
Sophos Mobile Control
2
About Sophos Mobile Control
Sophos Mobile Control is a device management solution for mobile devices like smartphones and
PDAs. It allows configuration and software distribution as well as security settings and many other device management operations on mobile devices. The Sophos Mobile Control system consists of a server and a client component which communicate through data connections and SMS messages.
This manual describes the Sophos Mobile Control web interface.
Sophos Mobile Control currently supports the following mobile device platforms:
Android
Apple iOS
Windows Mobile
BlackBerry (through BlackBerry Enterprise Server)
Note: For BlackBerry devices only the following functions are supported: show devices in Sophos
Mobile Control, Lock, Wipe, show software inventory, show device properties. The Self Service
Portal does not support BlackBerry devices.
Due to the nature of the different platforms supported features vary.
4
Administrator guide
2.1
Terminology
In this manual, the following terms are used:
Term
Device
Client
End user
Server
Web interface
Administrator
Customer
Provisioning
Explanation
The device to be managed (smartphone, PDA, etc.).
The Sophos Mobile Control client installed on the device, built-in MDM client iOS4.
The end user of the device.
The central component in the Sophos Mobile Control architecture.
The web interface of the server which is used to manage the devices.
The person who uses the web interface.
The tenant whose devices are managed with Sophos Mobile Control.
The process of equipping the device with the Sophos Mobile Control client.
2.2
Concept of different user roles
Because of the rights concept of Sophos Mobile Control not every module/action described in this guide is necessarily visible. Also, some buttons shown in screenshots may not be visible. The rights assigned to different modules and actions are defined in user roles. These roles may change and are fully adjustable with a special tool.
Usually the following roles exist:
Role
Administrator
User
Helpdesk
Description
Is allowed to perform all actions.
Is allowed to perform all actions concerned with installing and administrating a device, but not with essential settings (for example modifying a user, client package or template).
This role is intended for support purposes and has the fewest rights (for example installation of software packages), but no access to critical functions.
5
5
Sophos Mobile Control
3
Prerequisites
To use the web interface, you need a Sophos Mobile Control user account. These accounts consist of the following information:
Customer
User
Password
In addition, a computer connected to the internet is necessary. It has to be equipped with one of the following internet browsers. We recommend that you use the newest version of the relevant browser.
Microsoft Internet Explorer 6 (or higher), SVG-Viewer for the charts
Mozilla Firefox 1.0 (or higher)
Google Chrome
Apple Safari
For the web interface, JavaScript has to be activated.
6
Administrator guide
4
Login
To log in to the web interface:
1.
Enter the Sophos Mobile Control server URL in your preferred internet browser.
2.
Enter your account information.
3.
Click Login to send the data to the server.
If the information is correct, access to the web interface is granted. If the information is incorrect, an error message is shown and access is denied.
7
7
Sophos Mobile Control
5
Overview
After login the web interface displays the home page with the welcome view.
The home page consists of the header, the menu bar and the view. The header and the menu bar are static. The view is dynamic and changes its content depending on the relevant topic.
5.1
Header
The upper part of the interface shows the Filter, Home, Help and Logout buttons.
Button Description
Inactive filter – This button opens the filter function. With the filter function, you can
restrict the number of items shown in lists. For further details, see
Active filter – This button opens the filter function. With the filter function, you can restrict the number of items shown in lists. For further details, see
Filters
The Home button opens the welcome view.
This button opens the administrator guide as pdf.
This button logs off the currently logged in user.
8
Administrator guide
5.2
Menu
The menu on the left side of the interface is used to navigate to modules and functions. Click on a main module to open the sub items with a brief description. You can also open sub items directly.
5.3
Welcome view
The welcome view shows information about the user currently logged in (for example user name and role), information about the server version and buttons for the standard settings.
The following table offers a brief description of the buttons:
Icon Description
Opens the Change password dialog.
Opens the User management dialog.
Opens the Technical contact dialog.
Creates a report of all customers’ devices (CSV file).
Opens the Compliance settings dialog.
In addition a dashboard view of the managed devices is shown:
Status:
Shows the status of registered devices: for example compliant/not compliant, managed/not managed.
Platforms:
Shows the number of devices for each platform.
Device groups:
Shows device groups with the number of devices they contain.
Click on a table row to open a details view of this dashboard item.
9
9
Sophos Mobile Control
5.3.1
Settings
The Settings dialog shows the following tabs:
Personal
In this tab, you can specify the platforms you want to use and limit the maximum data sets you want to display per page. You can choose between 20 and 100 Data sets per table page. If you select specific platforms, you can only use those specific platforms with Sophos Mobile Control. All other platforms are hidden. In addition, all modules and functions that are not needed for a specific platform are hidden.
Note: These settings are user-specific. They have to be made separately for each user.
Provisioning via E-mail
In this tab, you can define an E-mail template for the initial provisioning of devices by E-mail.
With initial provisioning by E-Mail, devices are registered by sending an E-Mail to an account
(personal account or Google Mail account) available on the relevant device instead of SMS. You need to specify an Originator and a Subject. You can also predefine the E-mail Content. For the download link, you can use the placeholder _DOWNLOAD_LINK_ which will be replaced by the actual link in the E-mail sent to devices.
iOS APNS (Apple Push Notification Service)
In this tab, you can upload the “Apple Push Notification keystore” (which is needed to be able to use the APNS).
Android C2DM (Cloud-to-Device Management)
In this tab, you can specify the account to be used for sending Google Push Notifications. Possible types are Google, hosted and Google or hosted. You need to register this account for C2DM and specify the Sophos Mobile Control client package.
RIM BES (BlackBerry Enterprise Server)
In this tab, you can specify the BES URL and account configured to be used for Sophos Mobile
Control.
Self Service Portal
With the Sophos Mobile Control Self Service Portal, end users can register their devices themselves. In this tab, you can specify for which platforms registration through the Self Service
Portal should be active, the relevant device template, default group and task bundle.
You can also configure a mobile policy, disclaimer or agreement text to be displayed as a first step when users register their devices. For the text, HTML formatting tags are supported. The text will be displayed in the Browser accordingly.
5.3.2
Change password
In this dialog, you can change your user password. Enter the Old password, a new one and confirm the
New password.
10
Administrator guide
5.3.3
User management
User management gives you a quick overview of all registered users. To display all user information, click the magnifier button. You can sort the table by login name or last name. You can also add, edit or delete users.
For further details on tables, see Tables (page 14).
For users, the relevant user details and - most importantly - passwords need to be specified. In addition, you must specify the user role. In a standard installation there are three user roles:
Administrator
User
Helpdesk
To add a new user, click the Create new user button. Now the Edit user dialog is shown. In this dialog, you enter all relevant user information: Login name, Role, Password, Last name, First name, E-mail and optionally a Description.
Most people registered should have the role User. This role allows everything by default except for the right to modify:
User management
Sophos Mobile Control client packages
Device templates
5.3.4
Technical contact
The Technical contact information refers to the customer’s IT staff who can be contacted if there are any questions or problems. To add a technical contact, click the Edit button and enter the First name,
Last name, E-mail, Phone number and Mobile number.
Note: Only users with the user role Administrator can edit the Technical contact information.
11
11
Sophos Mobile Control
5.3.5
Compliance settings
In the Compliance settings dialog, you can configure a compliance check for devices. The function checks if devices are still managed by SMC and comply with your corporate rules for mobile access.
For the compliance check, you can define one set of rules per customer. You can enable/disable any platform. Click on the tab for the relevant platform to specify the rules per device type.
The following compliance settings are available for rules:
Managed required: Yes/No
Allow Jailbreak: Yes/No
Allow root access: Yes/No
Passcode required: Yes/No
Allow Non-Market Apps: Yes/No
Min. os version: Select the minimum operating system version required.
Max. synchronization gap: Select the maximum time span between synchronization processes of devices.
Max. iOS app synchronization gap: Select the maximum time span between synchronization processes of the iOS Sophos Mobile Control App. For further information, refer to the Sophos
Mobile Control user guide for Apple iOS.
Blacklist: Click Edit to define a blacklist of apps that must not be installed on devices.
Mandatory apps: Click Edit to define a list of apps that must be installed on devices.
For each option, you can define the action Disallow ActiveSync in case of non-compliance.
If the device does not comply with the rule, E-mail access will automatically be denied.
The Status table of the Welcome view shows how many devices are non-compliant. Click on the Not
compliant row to show a list of all non-compliant devices.
12
Administrator guide
6
Common elements
6.1
Buttons
This chapter gives a brief overview of all buttons throughout the web interface and their functions.
Button Description
Navigates to the next view of a wizard.
Navigates to the last view of a wizard.
Provides further information on a specific topic.
Duplicates a profile/command bundle.
Confirms an action.
Cancels an action.
Switches to the Select device group(s) view.
Switches to the Select device(s) view.
Finishes a wizard and executes an action.
Enables you to change settings or information.
Saves changed settings.
Reloads the content of a table.
Adds an entry.
Deletes a selected entry.
13
13
Sophos Mobile Control
Imports entries.
Creates a device report (CSV file).
6.2
Tables
To make the interface easier to use and to enhance responsiveness, all items shown in tables are grouped to usually 20 items per page. To browse table pages, use the table controls below the corresponding table.
These controls allow the following actions:
Control Description
Jump to first page.
Jump back five pages.
Jump back one page.
Jump to a specific page.
Jump forward one page.
Jump forward five pages.
Jump to the last page.
14
Administrator guide
Most tables allow actions regarding the listed items. The action icons are shown next to the items.
They trigger the following actions:
Icon Description
Show details of this item.
Edit this item.
Delete this item.
In some tables, you can also select one or several items for an action. To do so, select the check box next to the items. To select all items currently displayed, select the check box in the table header.
For selecting exactly one item, tables may also include radio buttons.
15
15
Sophos Mobile Control
The next two tables are based on each other. They are used when setting up specific functions as applications or system components of more than one device or device groups. The first table is only shown, if more than one device or a group of devices was selected during device/group selection. This table shows all devices selected or all devices included in the selected group/s, so you can specify a device as data source. Selecting a device as data source makes it easier to find the right function as only the functions available on the specific device are shown. But changing one of the settings will affect all of the devices or device groups selected, if they provide the same functions.
Settings can be activated, left unchanged, or deactivated. Remember that different devices may be configured differently. Activating or deactivating a function activates/deactivates the function on all selected devices. If you choose to leave the previous setting unchanged, the different settings of the devices are maintained.
Use the radio buttons to toggle the state to the desired value. The following symbols indicate activated/unchanged/deactivated processes:
Symbol Description
Activated process
Leave process unchanged
Deactivated process
In many tables, you can sort items. Fields that can be used for sorting show small arrows. Click the arrows to sort the items according to the selected field.
16
Administrator guide
6.3
Filters
By using filters you can restrict the number of items shown in lists according to defined criteria. To open the filter, click the Filter button located in the header. The Sophos Mobile Control web interface offers four different filters:
Device filter
Device group filter
Software filter
Task filter
The filters are not only valid for the function currently displayed, but for all functions where items of this type are listed. Filters are shown as drop-down menus. A status message indicates whether filters are active and restrict the results display at the top. After you have selected the required criteria, click the Filter button to activate the filter and reload the list of items. To reset a filter, click the Reset button, which is displayed if a filter is active. The different criteria options provided by the filters are described in the following sections.
6.3.1
Device filter
The device filter allows filtering lists of devices. It offers the following options:
Option
Name
IMEI
Phone number
SMC client
Package
Device group
Operating System
Description
Filtering device names/parts of device names.
Filtering IMEI.
Filtering phone number.
With this option, you can show all provisioned devices or all devices that are not provisioned.
Note: If you use this option in combination with the IMEI/Phone number option, the result set is not restricted further, but extended.
Filtering software packages/parts of software packages. You can use wildcards for both fields.
Device groups whose members are not to be displayed can be deactivated.
Devices which are equipped with a certain operating system can be deactivated.
17
17
Sophos Mobile Control
6.3.2
Device group filter
The device group filter restricts the results in lists of device groups. It offers the following option:
Option
Name
Description
Filters by name of the device group.
6.3.3
Software filter
The software filter is used to restrict the results in lists of software packages. It offers the following options:
Option
Name
Version
Operating System
6.3.4
Task filter
Description
Filters by name of the package
Filters by version of the package
Packages which are applicable for certain operating systems can be filtered by selecting the check box next to the operating systems.
With the task filter, you can filter tasks displayed in both the task view and the task archive. It offers the following options:
Option
Device
Package
State
Group
Description
Filters by device name.
Filters by package name.
Tasks in a specific state can be deactivated. The states are grouped in five groups for easier handling.
Device groups whose members are not to be displayed can be deactivated.
18
Administrator guide
7
Wizards
The concept of wizards guiding through task creation is a common feature in the web interface. This chapter first describes the basic procedure of creating a task. Afterwards, module-specific aspects are described.
1.
As a first step, you select the target devices for the task. Under Select Devices or Select device
group(s), you can select one or more devices or device groups.
Note: Due to the different objects to select for the task it is usually not wise to select devices with different operating systems, for example Android and Windows Mobile.
2.
In the next step, you select the task object. This can for example be a software package to install or uninstall. In the final step under Set execution date, you schedule the task.
Now is pre-selected, but you can also select date and time. The task will be started on the given date. This makes it for example easy to have tasks running at night when the users do not use their devices.
3.
Click Finish to start task creation.
Depending on how many devices are selected, this may take some time. A progress bar shows task creation progress. The server creates a separate task for each selected device, no matter if it was selected by adding a group or as a single device. Any events during task creation are listed in a table with a description and the corresponding device. This is for example the case, if a device already has the selected package installed. Tasks for devices listed in this table are not created. All other devices remain unaffected. Their tasks are created.
The tasks appear in the task view after the server has finished creating them. Depending on the scheduled date, they are not necessarily started immediately.
All wizards work this way. Later chapters just describe aspects to consider regarding the specific modules.
19
19
Sophos Mobile Control
8
Task view
In the Task view, you can monitor all existing tasks in the system. In contrast to the task archive, the
Task view only lists unfinished and failed tasks. For user convenience, it also displays the finished tasks of the last few days. Older tasks are automatically moved to the task archive. The Task view is refreshed automatically, so you can watch the states of the tasks evolve. The task archive does not have this autorefresh feature. All tasks created using the web interface are listed in the task view (installations, process activations, text SMS etc.). It does not matter which user created the task, all users see all tasks of the customer.
The icons of the task item categorize the respective task. They have the following meaning:
Icon Description
Installation
Uninstallation
Process activation/deactivation
Explicit refresh of device data
Text SMS
Windows Mobile profile transfer iOS profile transfer
Command bundle transfer
Bootstrap
Command transfer
Windows Mobile security settings
The delete icon removes the item next to it. The task is deleted. If the task is not finished at the time of deletion, it may still be carried out depending on the current task progress.
20
Administrator guide
8.1
Explanation of task states
State
Accepted
Retry
Started
In progress
Sending notification
Waiting for delivery
Notified
Exported
Result evaluation started
Result incomplete
Successful
Installed
Result evaluation failed
Result evaluation aborted
Description
The task has been created.
The task will be retried later.
The task has been started.
The execution of the task is being prepared.
The client is being notified.
The server is waiting for a confirmation of the notification by the client.
The client has received the notification.
The client has received the package and/or the commands.
The client has answered and the evaluation of the result has been started.
The result evaluation showed that not all commands’ results have been received by now.
The package has been installed or the commands have been successfully executed.
Note: For the initial provisioning of the Sophos Mobile Control client the task must finish with the state “installed”.
The Sophos Mobile Control client has been installed successfully.
The device is provisioned now.
The result evaluation could not be executed.
The result evaluation has been aborted.
Task partly failed
Delayed
Failed (retry queued)
Task failed
Completely failed
Not all commands of the task could be executed successfully.
The task will be restarted later.
The task has failed and will be retried later.
The task has failed and no further retries are queued.
The task has failed.
21
21
Sophos Mobile Control
8.2
Task history
The magnifier icon opens the Task history. Besides general information on the task (for example
Device, Package name, Creation date etc.) it shows the states a specific task went through including timestamps and error codes.
If there are commands to be executed by the device, an additional Details button appears in the Task
history. Click the Details button to open the Commands view. The commands sent to the device are part of the task. They are executed by the client. Results indicating the success or failure are transferred back to the server. If there was no error, the error code is “0”. If a command has failed, the error code is displayed. In most cases there is also a description of what may have caused the command to fail.
22
Administrator guide
9
Inventory
If you click Inventory in the menu, you get a quick overview of the sub items Devices and Device
groups and a brief description of their functions. In addition, a circular chart of all devices and the different platforms registered is shown.
Click on one of the platforms in the chart to open a second chart showing a breakdown of the versions installed on the devices.
Note: The Internet Explorer must have an SVG-Viewer plug-in installed to display the chart.
9.1
Devices
The Devices view lists all devices known for the customer with their Name, Operating System and the
Group they belong to.
The Managed column shows whether the device is controlled by Sophos Mobile Control (green icon:
Yes, red icon: No). The Compliant column shows whether the device complies with the compliance check rules defined (green icon: Yes, red icon: No).
The Synchronized column shows when the devices have last synchronized with the server.
9.1.1
Creating a new device
1.
To create a new device, click the Create new device button.
2.
In Select device template, you select the appropriate device template.
New device templates can be added by updates supplied by Sophos.
3.
In Edit device, specify the device details. You must at least specify the device Name, Description and Phone number. It is important to enter the phone number in international format, for example “+491701234567”.
For registering the device by E-mail you can also enter an E-Mail address. You can define the E-
Mail to be sent under Settings.
23
23
Sophos Mobile Control
9.1.2
Importing devices
You can add new devices by importing a .csv file with up to 500 devices. A sample file with the correct column names and column order is available for download from the import page.
Note: Use a text editor for editing the .csv file. If you use Microsoft Excel, values entered may not be resolved correctly. Make sure that you save the file with the extension .csv.
Click the Import devices button showing a small arrow symbol pointing downwards.
1.
In the message displayed, select the data source CSV file.
The Import devices page is displayed.
Note: If you do not have a .csv file with devices yet, you can download a sample file now and use it for creating your import file.
2.
Select the .csv file you want to import and click Upload file.
The entries in the.csv file are checked for errors and displayed on the import page.
Note: If there are any errors in the .csv file, it cannot be imported. An error message is displayed next to the relevant entries. Edit the .csv file accordingly and try again.
3.
If all entries are correct, click the blue Finish button.
The devices listed in the .csv file are imported and displayed in the Devices view.
9.1.3
Importing BlackBerry devices through BlackBerry Enterprise Server
You can import BlackBerry devices through BlackBerry Enterprise Server to show them in the Sophos
Mobile Control Devices view.
1.
Click the Import devices button showing a small arrow symbol pointing downwards.
2.
In the message displayed, select the data source BlackBerry Enterprise Server.
The Import devices page is displayed.
3.
Click the Query button to display a list of all devices registered with BlackBerry Enterprise Server.
You can also specify a filter for the list of devices in the fields User name and E-mail.
4.
Select the devices to import and click the blue Finish button.
A message is displayed.
5.
In the message, select if all or only selected devices should be imported, specify the template and device group to be used.
6.
Confirm your selection by clicking the blue button.
The selected BlackBerry devices are imported and displayed in the Devices view.
Note: For BlackBerry devices only the following functions are supported: show devices in Sophos
Mobile Control, Lock, Wipe, show software inventory, show device properties. The Self Service Portal does not support BlackBerry devices.
24
Administrator guide
9.1.4
Creating a device report
To export device information from the Devices view:
1.
Click the Export button showing an arrow symbol pointing upwards.
A file download dialog is displayed.
2.
Click Save to save the export file to the required file location.
Note: The device report format is different from the device import spreadsheet format and contains significantly more information. An export can therefore only be imported after major adjustments.
9.1.5
Show device/Edit device view
To view/edit the details of individual devices, click the magnifier symbol/pen symbol next to the relevant device in the Devices view.
In the Show device/Edit device view, all relevant information for an individual device is displayed:
Name, Description, Device group, Operating System, Phone number, Last synchronization. The table at the bottom shows all properties for the device. For Android devices, rooted smartphones are detected and the relevant property is shown in this view. For Apple iOS devices, jailbroken smartphones are detected and the relevant property is shown.
Note: Before a device has been registered, the Operating System information displayed here originates from the operating system you have selected when you added the device. After the device has been registered, the operating system is detected automatically. The Show/Edit device view then shows the more detailed operating system information received from the mobile device.
For non-compliant devices, click the Compliance/Violations button to show a table of all violations occurred. Click the Show icon in the table to view the History of violations for the device. Click the
Edit icon to display the Add action dialog. In this dialog, you can enter information on the action taken due to the compliance violation. For example: Notified user by E-Mail.
9.1.6
Buttons for administrating devices
There are many different buttons to help administrating the devices and viewing device information.
Certain buttons are shown depending on device platform and configuration.
Button Description
Click this button to set the name and the IMEI of the specific device in the Device filter.
Shows the installed software packages, version numbers and processes.
Shows the installed profiles. In this dialog, you can also delete profiles.
Use this button to add an ActiveDirectory link to the device.
25
25
Sophos Mobile Control
Button Description
Use this button to remove an ActiveDirectory link to the device.
Use this button to refresh the data.
Opens the traffic counter details for the device.
Indicates that E-Mail access is denied.
An additional icon on the button indicates whether E-Mail access was denied
manually or
automatically .
If you click this button, a window opens where you can allow E-Mail access or set it to automatic mode.
Indicates that E-Mail access is allowed.
An additional icon on the button indicates whether E-Mail access was allowed
manually or
automatically .
If you click this button, a window opens where you can deny E-Mail access or set it to automatic mode.
Indicates that the Active Sync ID for the device is unknown. Settings do not have any effect.
How to get the Active Sync ID for a device depends on the device type:
For Apple iOS and Windows Mobile Devices, the Active Sync ID is known as soon as the device is managed by the SMC profile/client.
For Android devices, the ID is resolved when the device connects with the
Exchange Server for the first time. Devices are identified by the Exchange user name. The Active Sync ID is then entered.
Note: This is only possible if just one device is found.
Locks the device remotely.
Unlocks the device remotely.
For Apple iOS devices, this icon also resets the passcode/password on the device. The user is prompted to define a new one.
For Android devices, the administrator can replace the passcode/password with a new one. It must comply with the passcode/password rules.
26
Administrator guide
Button Description
Deletes all synchronization data of the device. Sophos Mobile Control client needs to be reinstalled.
Use this button to wipe the device remotely in case of loss.
Use this button to send a text SMS message to a specific device.
Note: This function is only available for Android devices.
Use this button to locate a device.
Note: This function is only available for Android and Windows Mobile devices.
Restores the data for the device from backup.
Note: Property changes only become valid after you have clicked Save. If you do not save the changes you have made, they do not have any effect.
When you delete a device its tasks are automatically deleted too. The server deletes everything that is related to the device, including synchronized information. The client side is not affected by the server side deletion. If the client is to be reinstalled, the Sophos Mobile Control client has to be removed from the client manually.
9.2
Device groups
With device groups, you can categorize devices. A device always belongs to exactly one device group.
Using different groups makes it easy to work with the system because most modules allow the selection of complete groups as well as single devices.
Note: We recommend to only group devices which have the same operating system. This makes it easier to use them for installations and other operating system specific tasks.
Deleting device groups moves the group’s devices to another group that has to be specified. If there is no other group left to move the devices to, the group cannot be deleted. Before a group is deleted, a warning message is displayed. To delete the group, confirm this message.
27
27
Sophos Mobile Control
10
Provisioning
10.1
Sophos Mobile Control client packages
This function lists the Sophos Mobile Control client packages available for provisioning new devices.
New packages can be added by updates supplied by Sophos. You can also use the Create new package button.
10.1.1
Create new Sophos Mobile Control client package
To create a new Sophos Mobile Control client package, specify a Name, Version number and compatible Operating systems. In addition, specify how the setup is to be provided: Upload package or
Link to package.
10.2
Sophos Mobile Control client installation
This function is used for provisioning new devices. This is usually done only once per device. The function creates basic data for the device and sends a short message (SMS) with an installation link for downloading the selected Sophos Mobile Control client package. The type of the message depends on the device template used, because devices with different operating systems support different ways to install the client. For further information on how to install the Sophos Mobile Control client on the device, refer to the Sophos Mobile Control user guides for Android, Apple iOS and Windows Mobile.
Note: If the Sophos Mobile Control client needs to be reinstalled because the device has been reset/formatted, the Sophos Mobile Control client flag in the device’s properties has to be reset before entering the wizard. This causes the server to remove all data of previous synchronizations.
28
Administrator guide
11
Applications
11.1
Software packages
With the software packages function, you can create new packages to be installed on the devices.
Packages may consist of several files although they are usually packaged as an operating system specific file (for example “cab” or “apk”).
As an administrator, you can upload new packages by clicking the Create new package button.
Under Edit package, enter the Name and the Version of the software package and select the Operating
system the package applies to. In addition, specify how the setup is to be provided: Upload package or
Link to package.
For the provisioning of software through the Enterprise App Store, you can define software packages as
Required or Recommended. The software package is then listed in the Enterprise App Store of the
SMC agent for download and users can select it for installation. The installation process runs unattended or with very little user interaction.
If you want to delete a software package, you must first delete all active tasks referencing it.
11.2
Install
With the Install function, you can install software packages on the devices. If the device is provisioned, installation is performed by the Sophos Mobile Control client. In this case, the operation is silent. The end user cannot interfere.
The software packages available for installation have to be created by using the software packages function before they are available in the object selection step.
In the date selection step, you can set the Enforce flag for this task. In this function, the Enforce flag specifies if the task is to be created although the device already has the selected package installed. If it is not selected and the server notices that the device already has the package installed, it will output a notice and will not create a task for this device.
11.3
Uninstall
With the Uninstall function, you can remove packages from the clients. The object selection step lists packages installed on the clients. If more than one device has been selected, the list shows all packages for all devices. In this function it is likely to get a notice when creating the tasks because usually not all devices have the selected package installed.
Uninstallation is carried out silently. The end user cannot interfere. If the application to be uninstalled is currently running, Sophos Mobile Control closes it before uninstalling it.
29
29
Sophos Mobile Control
11.4
Enable/disable
With this module, you can activate or deactivate processes on the device. Deactivated processes are not allowed to run. The Sophos Mobile Control client monitors all processes running on the device and immediately kills deactivated processes. This allows you as an administrator to disable certain applications. Activated processes are unaffected and can be started.
Note: If software packages are installed on the device manually (not via Sophos Mobile Control), the included processes are deactivated by default. If the package has been installed using Sophos Mobile
Control, they are activated automatically.
Note: If a package that contains activated processes is uninstalled, the processes remain activated. This means that once the same application is installed again the processes are still activated, regardless of whether the installation is done by Sophos Mobile Control or manually.
Processes can be activated or deactivated for single or multiple devices. The common wizard is used to create the tasks. When you set up multiple devices, one additional step called Base device selection is added after device/group selection.
Note: For Windows Mobile, the enabling and disabling of processes is deactivated by default. You can activate this functionality with the setConfig command (ProcessSecurityOn).
11.4.1
Single device
For some devices, system processes are also defined. You define them when creating the device from a template or with the Create new property function (under Edit device).
If the state of a process that is not listed is to be changed, you can enter it manually. To do so, you need to know the name and the ID of the process. In case of Windows Mobile processes, the ID is the file size in bytes as shown under Show installed software. In this case, it is necessary to have a device that lists these processes and retrieve the ID this way.
1.
To enter new processes, use the menu to navigate to Devices and edit the specific device.
2.
Click the Create new property button. The Edit property dialog is displayed. The syntax must be as in the following example:
Name: SystemProcess2
Value: Internet;10008d39,BrowserNG.exe
The name is always “SystemProcess” followed by an index starting at “0”. Spaces are not allowed.
When you create another process always use the subsequent index, for example “SystemProcess1”,
“SystemProcess2”.
The value is
<display name>;<UID of the process>,<name of the process>
.
Multiple processes can also be combined, for example
<display name>;<UID of the process>,<name of the process>;<UID of the process>,<name of the process>.
We recommend that you change the default display name to a more meaningful name describing the goal of the process state changes. Created processes are shown under Properties.
30
Administrator guide
11.4.2
Multiple devices
The device selected in Base device selection serves as the process information basis. Only the processes for this device are listed for activation/deactivation. But all devices selected during device/group selection will be affected by the change if they provide the same processes.
In contrast to the single device states function, all states are displayed as unchanged. So by default, no process is changed and the specific settings for each device will be kept. You can select each state separately. If a target device does not have the process to be changed installed, it is not affected by the change.
All processes not selected for activation or deactivation remain in their current state.
31
31
Sophos Mobile Control
12
Configurations
With this module, you can create and transfer setting profiles for Windows Mobile, Android and Apple iPhone/iPad devices.
12.1
Profile templates
With this module you can manage templates for setting profiles. They define the setting options available for the Sophos Mobile Control user. New templates supplied by Sophos have to be uploaded manually by an administrator using the Create new template button.
Note: Profile templates are only available for Windows Mobile devices. To create an Apple iPhone/iPad profile, you need to install the Apple iPhone configuration utility.
1.
Navigate to Apple iPhone in the menu to get a short overview of the functions of the utility.
2.
Click the Profile creation button to get to the download links and a short description on how to create an Apple iPhone/iPad profile.
12.2
Profiles
This module manages settings profiles for Windows Mobile and Android devices. Apple iPhone/iPad profiles created previously have to be uploaded with this module.
Before creating a new profile, you have to upload at least one profile template. The selected template defines the set of settings available to the Sophos Mobile Control user. You can create any number of different profiles.
Note: Each function has to be applied separately. Settings will be lost, if you do not apply the function.
Settings will also be lost, if you do not save them before leaving the Edit profile dialog.
Since creating a profile can be time-consuming, created profiles can be duplicated with the Duplicate
this bundle button. This function is helpful if you need to create several extensive profiles with similar settings. Then only few settings need to be changed.
Note: Profiles can only be duplicated, if you are not editing the profile at the time. Copies are named
“Copy of” plus the name of the original, but can be renamed.
32
Administrator guide
12.2.1
Placeholders for profiles
Generic profiles may contain placeholders which are replaced by user data at the time of task execution. The following placeholders can be used in profiles:
ActiveDirectory placeholders:
%_EMAILADDRESS_%
%_USERNAME_%
%_PHONENUMBER_%
Device property placeholder:
%_DEVPROP(property-name)_%
This placeholder can for example be used to specify the IMEI of the device: %_DEVPROP(IMEI)_%
12.3
Transfer
With this module, you can transfer profiles to specific devices or device groups. The common wizard is used to create the task.
33
33
Sophos Mobile Control
13
Command bundles
13.1
Bundles
With this module, you can combine various commands to command bundles. So you can configure many different functions with only one transfer. This is especially helpful, if many devices are to be configured the same way. Command bundles are only available for Windows Mobile and Android devices. When you create a new bundle, you must select a name, a version, at least one operating system and at least one command.
Note: Improperly used commands may lock or even damage the devices. Therefore only experienced users should use this function. We highly recommend that you test the commands on a single device before you distribute them.
Standard commands are supported on all available platforms. Commands of platform-specific categories are only supported by the specific platforms. The columns AND (Android) and WIN
(Windows Mobile) alongside the commands indicate for which platform(s) the commands are available. If various platforms have been selected and a platform-specific command has been added, devices that do not support the specific function refuse the command.
You can set the order of installation for selected commands by using the sort arrows on the right-hand side of the list. The arrows trigger the following actions:
Icon Description
Move up one row.
Move to the top of the list.
Move down one row.
Move to the end of the list.
Since creating a command bundle can be time-consuming, finished command bundles can be duplicated with the Duplicate this bundle button. This function is helpful, if several extensive command bundles with similar commands need to be created. Then only few commands need to be deleted or added.
Note: Command bundles can only be duplicated, if you are not editing the bundle at the same time.
Copies are named “Copy of” plus the name of the original, but can be renamed.
34
Administrator guide
13.2
Parameters for the setConfiguration command
With the command setconfiguration, you set values in the configuration of the Sophos Mobile Control
Client. The command offers the following parameters:
Parameter Description Value type
Value range Default WM AND
AdminSMS
ImsiChange
NotifyDelay
Administrator SMS phone number for IMSI change.
Delay for the check for IMSI change in seconds
(-1: off, >=0: on).
MaxSyncGap Automatic sync interval in minutes (0: off)
String
Number -1 - 1800 -1
Number 0 - 2147483647 0
13.3
Transfers
With this module, you can transfer command bundles to specific devices or device groups.
The common wizard is used to create the task.
35
35
Sophos Mobile Control
14
Backup
With the Backup module you can configure data backups for Android and Windows Mobile devices.
The backups handle SMS messages, bookmarks and user defined directory paths. After backups have been created, you can restore data for devices by clicking the Restore data from backup button in the
Show device or Edit device view.
14.1
Profiles
You can configure backups by selecting Profiles under Backup from the Sophos Mobile Control menu.
Under Edit backup configuration you specify a Name and a Version for the new backup configuration and select the operating systems the configuration applies to. To specify a Schedule for the backup, select the required weekdays and time.
You can select the following to be backed up:
SMS
Bookmarks of system browser
Paths to backup
14.2
Transfer
With this module, you can transfer backup configurations to specific devices or device groups.
36
Administrator guide
15
Task bundles
With the Task bundles module, you can bundle several tasks for mobile devices in one transaction.
So you can bundle all tasks necessary to have a device fully registered and running:
Provision the device
Apply required policies
Install required applications
15.1
Bundles
You create a new task bundle by selecting Bundles under Task bundles from the Sophos Mobile
Control menu.
When adding new tasks, you can specify your own meaningful task names for the tasks selected.
You can set the order of installation for selected commands by using the sort arrows on the right-hand side of the list (see Command bundles).
Finished task bundles can be duplicated with the Duplicate this bundle button.
15.2
Transfer
With this module, you can transfer task bundles to specific devices or device groups.
After you have transferred the task bundle to the relevant devices, the tasks in the bundle are executed in the order you have defined.
37
37
Sophos Mobile Control
16
Traffic counter
In the Traffic counter module, the data traffic used for the current and previous month is shown.
It gives a rough overview of all devices. Select a specific device to view information about the traffic during the past twelve months or a detailed overview for each day of a specific month. When a device reaches the configured limit, the server sends a short message (text SMS) or a message box including a warning message.
Note: The traffic counter is only available for Windows Mobile and Android devices.
Note: The Traffic counter module does not restrict data traffic usage, even if the limit is reached.
It only informs the user of the device.
In the Traffic counter view, several values are marked in red if traffic appears. This function provides a better overview on wanted and unwanted traffic. Therefore, Wi-Fi traffic is never going to be marked in red. GSM traffic is only marked in red if the limit is exceeded. GSM roaming traffic is going to be marked in red as soon as any traffic appears.
Click on a specific device to show the annual survey. You can restrict traffic counter detail information to specific communication media. You can also set the limit for data traffic use in this dialog.
Select a specific month to display the month chart. It shows the detailed data traffic use for each day.
Note: The Internet Explorer must have an SVG-Viewer plug-in installed to display the chart.
38
Administrator guide
17
The Sophos Mobile Control Self Service Portal
With the Sophos Mobile Control Self Service Portal, end users can register their devices themselves.
Self registration is supported for
Android
Apple iOS
Note: As iPads cannot receive SMS messages with installation links, iPad users have to use the Self
Service Portal to register their devices and to install the Sophos Mobile Control client.
Windows Mobile
You can define settings for the Self Service Portal under Settings in the tab Self Service Portal.
For further information on how to use the Self Service Portal, refer to the Sophos Mobile Control user
guides for Android, Apple iOS and Windows Mobile.
17.1
Login at the Self Service Portal
The Self Service Portal supports multiple clients and ActiveDirectory (AD) servers. For successful authentication, the Self Service Portal needs to resolve the client and connected ActiveDirectory. The following table shows the options you have here:
Scenario AD Server Explanation
1
Customer
(Tenant)
1 1
2
3
4
1
N
N
N
1
N
The user login is sufficient to authenticate against the system. The DNS name of the default domain will automatically be extended.
If more AD servers are used, a qualified user name must be given in one of the two options shown here:
1.) <NetBIOS name> \<login name>
2.) <login name>@<DNS name>
For each of the clients a separate group in AD must be available to achieve a unique assignment
If more AD servers are used, a qualified user name must be given in one of the two options shown here:
1.) <NetBIOS name> \<login name>
2.) <login name>@<DNS name>
39
39
Sophos Mobile Control
18
Troubleshooting
Problem Possible reason Solution
I cannot log in.
I cannot register devices.
Login data is incorrect. Check the data and try again.
The Sophos Mobile Control installation does not use a valid license.
Check with your System
Administrator whether a valid license has been used for Sophos
Mobile Control installation. For further information refer to the section Licenses in the Sophos
Mobile Control installation guide.
Item tables are empty. The filter is too restricted. There are no items that match the criteria.
Edit criteria or reset filter.
Software packages are always installed via sms link (should be silent).
The device is not provisioned. The
Sophos Mobile Control client is not installed on the device.
Install Sophos Mobile Control client (“provisioning”).
The device has been switched off. Wait until it is switched on.
The provisioning task to install
Sophos Mobile Control client stays in state “successful”.
The installation has failed. Ensure that the correct Sophos
Mobile Control client package has been selected for installation.
The wrong package has been installed.
Delete the task and retry using the correct package.
40
Administrator guide
19
Technical support
You can find technical support for Sophos products in any of these ways:
Visit the SophosTalk forum at
http://community.sophos.com/
and search for other users who are experiencing the same problem.
Visit the Sophos support knowledgebase at
http://www.sophos.com/support/
.
Download the product documentation at
http://www.sophos.com/support/docs/
.
Send an email to
, including your Sophos software version number(s), operating system(s) and patch level(s), and the text of any error messages.
41
41
Sophos Mobile Control
20
Legal notices
Copyright © 2011 Sophos Ltd. All rights reserved.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise unless you are either a valid licensee where the documentation can be reproduced in accordance with the license terms or you otherwise have the prior permission in writing of the copyright owner.
Sophos is a registered trademark of Sophos Ltd. All other product and company names mentioned are trademarks or registered trademarks of their respective owners.
Powered by DIALOGS Software GmbH
42
Lataa
Julkinen linkki päivitetty
Chattisi julkinen linkki on päivitetty. You may view and manage your chat links after registration here.
Dokumentin julkinen linkki
Mainos