advertisement
FIBER SYSTEM SOLUTIONS
P R O D U C T G U I D E
TABLE OF CONTENTS
DISTRIBUTION RACK ACCESSORIES & PARTS
DUSTCAPS, BOOTS & INSTALLATION TOOLS
TAC-4 & TAC-12 CABLE ASSEMBLIES
OPTICALCON® FIBER OPTIC CABLE ASSEMBLIES
9.2MM HYBRID FIBER OPTIC CABLE
SINGLE-MODE OPTICAL FIBER CABLE
MULTI-MODE OPTICAL FIBER CABLE
OPTICAL FIBER
SYSTEM SOLUTIONS
CABLE ASSEMBLIES | DISTRIBUTION SYSTEMS | REPAIRS | CABLE & CONNECTORS
T
he leading innovator of interconnect technology for broadcast and pro A/V applications, Gepco delivers a full line of optical fiber solutions for high definition audio and video applications. Engineered and manufactured to industry leading standards, Gepco fiber systems bring the optical clarity and reliability required for highbandwidth data transmission in television, video production, staging, outdoor broadcast and professional audio applications. With a complete range of cable assemblies, panels, components and accessories, Gepco’s optical fiber systems product line provides a turn-key optical solution.
Broadcast and Pro A/V
Hybrid SMPTE HD Cameras
Tactical Applications
Distribution Systems
Components
Test Equipment and Accessories
FIBER SYSTEM SOLUTIONS
SMPTE 304M/311M Hybrid Fiber
Direct Cable Termination Configuration
Lowest System Attenuation
Utilized SMPTE 304M Panel Mount Connectors
Field Terminated or Factory Terminated (If Installed with Body
Removal and Installation Adapter)
Blank Panels Available in Straight or Angled Configurations
The Direct Cable termination method is achieved with panel mount
SMPTE 304M hybrid fiber connectors directly terminated onto the hybrid cable that permanently interconnects between panels, junction boxes, and control room racks. Panel mount SMPTE 304M connectors offer the lowest overall insertion-loss at each breakout point. Panel Mount connector must be field terminated or factory terminated and installed on-site with the DCS.3K.175.72LN installation tool.
4
CAMERA
Hybrid Cable Assembly from Camera to Panel
See Page 6
Hybrid Cable Assembly for Patching Between Panels
Panel Loaded with Bulkheads at Studio or Camera Location
Socket and Plug Assembly
Interconnects Between Blank Panels
+
See Page 16
Panel Loaded with Bulkheads at Machine Room Location
See Page 7
+
Panel Loaded with Bulkheads at Machine Room Location
See Page 16
Plug Bulkhead Assembly
Interconnect from Panel to CCU
CCU
See Page 6 See Page 16 See Page 7 www.gepco.com | 800.966.0069
FIBER SYSTEM SOLUTIONS
SMPTE 304M/311M Hybrid Fiber
Distribution Rack Configuration
Easy to Field-install and Terminate
Modular Channels can be Reconfigured On-site
Replaceable Contact Jumpers for Field Serviceability
Does not Require Specialized Labor or Tooling
Uses Cost Effective, General Purpose Fiber and Electrical Cables
Gepco HDR and HDRA distribution racks offer an exceptionally flexible and modular solution to the field deployment and installation of permanent installation SMPTE hybrid camera cables. With the Distribution
Rack method, SMPTE 304M connectors are broken out to separate electrical and optical elements on the back of the distribution rack. These separate elements can then be readily terminated to fiber and electrical cabling without the need for the specialized labor or tooling required for the termination of SMPTE hybrid fiber.
Hybrid Cable Assembly from Camera to Panel
Distribution Rack at Studio or Camera Location
Single-mode Fiber & Electrical Cable
Interconnects Between Distribution Racks
CAMERA
Distribution Rack at Machine Room Location
See Page 6
Hybrid Cable Assembly for Patching Betwween Distribution Racks
See Page 10
Distribution Rack at Machine Room Location
See Pages 34 & 36
Hybrid Component Breakout
Interconnects Back of HDR to CCU
CCU
See Page 10 See Page 6 See Page 10 See Page 8 www.gepco.com | 800.966.0069
5
FIBER SYSTEM SOLUTIONS
SMPTE 304M/311M Hybrid Fiber Cable Assemblies
Gepco GHF hybrid fiber and copper camera cables, terminated with
SMPTE 304M connectors for high definition video camera to CCU interconnects.
Gepco SMPTE hybrid fiber cables utilize two single-mode fibers for high bit-rate signal transmission and copper elements for auxiliary and signal electrical connections. Each fiber is coated with a high tensile strength coating for exceptional durability and strength. The copper elements feature a heat resistant PE insulation material for dependable performance in high temperature environments.
Fiber contacts are machine polished to meet or exceed all SMPTE standards. With typical UPC performance of -55dB RL, Gepco hybrid fiber cables achieve exceptional optical clarity to deliver reliable performance and low transmission loss.
F E AT U R E S & B E N E F I T S
Machine Polished
-55dB Return Loss (Typical)
Portable, Extra-rugged, and Permanent Install Versions
Lemo or Canare Connectors
Extra-rugged Designs
Heat Resistant
Meets or Exceeds SMPTE 304M/311M Standards
Portable: Heavy-duty 12mm Type
Cable Type
HDC120P
Connector Type
SMPTE 304M Hybrid Connectors - 1 Plug,
1 Socket with Metal Dust Caps
Standard Lengths
50’, 100’, 164’, 250’, 328’, 500’, 656’
PART NUMBER: GHF12B-0-(length)
Options
Lemo or Canare Connectors
6
Portable: Thin Profile 9.2mm Type
(One end shown with optional overbody boot. Please specify when ordering.)
Cable Type
HDC920
Connector Type
SMPTE 304M Hybrid Connectors - 1 Plug,
1 Socket with Metal Dust Caps
Standard Lengths
50’, 100’, 164’, 250’, 328’, 500’, 656’
PART NUMBER: GHF92A-0-(length)
Options
Lemo or Canare Connectors
Overbody Rubber Boot
-OB Add for Overbody Boot Option www.gepco.com | 800.966.0069
FIBER SYSTEM SOLUTIONS
SMPTE 304M/311M Hybrid Fiber Cable Assemblies
Standard In-line: Permanent Installation
Cable Type
HDC920R
Connector Type
SMPTE 304M Hybrid Connectors - 1 Plug,
1 Socket with Metal Dust Caps
Standard Lengths
50’, 100’, 164’, 250’, 328’, 500’, 656’
PART NUMBER: GHF92B-0-(length)
Options
Lemo or Canare Connectors
Plug Bulkhead: Permanent Installation
Cable Type
HDC920R
Connector Type
SMPTE 304M Hybrid Connectors - 1 Plug Bulkhead, 1 Socket with Metal Dust Caps
Standard Lengths
50’, 100’, 164’, 250’, 328’, 500’, 656’
PART NUMBER: GHF92B-0-(length)-PB
Options
Lemo or Canare Connectors
Socket Bulkhead: Permanent Installation
Cable Type
HDC920R
Connector Type
SMPTE 304M Hybrid Connectors - 1 Plug,
1 Socket Bulkhead with Metal Dust Caps
Standard Lengths
50’, 100’, 164’, 250’, 328’, 500’, 656’
PART NUMBER: GHF92B-0-(length)-SB
Options
Lemo or Canare Connectors
Plug & Socket Bulkhead: Permanent Installation
Cable Type
HDC920R
Connector Type
SMPTE 304M Hybrid Connectors - 1 Plug Bulkhead, 1 Socket Bulkhead with Metal Dust Caps
Standard Lengths
50’, 100’, 164’, 250’, 328’, 500’, 656’
PART NUMBER: GHF92B-0-(length)-SPB
Options
Lemo or Canare Connectors www.gepco.com | 800.966.0069
7
FIBER SYSTEM SOLUTIONS
Hybrid Fiber Breakout: In-line Cable
F E AT U R E S & B E N E F I T S
ST/SC/LC Optical Breakout
AMP Electrical Breakout
Machine Polished to -55dB RL (Typical)
CMR Rated 311M Hybrid Cable for Permanent
Installation
Available in Short or Long Cable Lengths
For Interfacing SMPTE Hybrid Devices with the Back Panel of
Distribution Panels or Other Component Level Devices
Gepco hybrid fiber breakout cables offer an in-line solution for breaking out SMPTE 304M Hybrid connectors to separate optical and electrical connectors. This solution allows for the interfacing of SMPTE hybrid camera devices, such as CCUs, directly to the back of a
Gepco HDR/HDRA distribution rack.
As with all Gepco GHF cables, the breakout series is machine polished to meet or exceed all SMPTE 304M/311M standards.
Terminated with HDC920R riser rated
9.2mm cable, breakout cables can be used in most permanent installation environments.
8
GHF92B -
Length
-
(First End)
Connector Format
/
(Second End)
Fiber Breakout
(Second End)
Electrical Breakout
Fiber Connector Options
In Feet
P = Plug
PB = Bulkhead Plug
S = Socket
SB = Bulkhead Socket
ST = ST UPC
SC = SC UPC
LC = LC UPC
DSC = Duplex SC UPC
DLC = Duplex LC UPC
Standard Gender
A = 5-pin AMP Metal CPC (for Mating with HDR & HDRA Racks)
B = 8-pin AMP CPC
C = 6-pin AMP MATE-N-LOCK Cap
D = Blunt
Reverse Gender
E = 5-pin Reverse Gender CPC - In-line or Panel Mount
F = 8-pin Reverse Gender CPC - In-line
G = 8-pin Reverse Gender CPC - Panel Mount
H = 6-pin Reverse Gender MATE-N-LOCK
ST SC
Electrical Connector Options
LC
A B
Standard Gender
C E F G
Reverse Gender
H www.gepco.com | 800.966.0069
FIBER SYSTEM SOLUTIONS
Hybrid Fiber Breakout: Internal Distribution
F E AT U R E S & B E N E F I T S
ST/SC/LC Optical Breakout
AMP Electrical Breakout
Machine Polished to -55dB RL (Typical)
Uses Short Length Fiber and Electrical Elements
For Panel Mounting in Blank Panels or as a Replacement in Hybrid Devices
Hybrid Fiber internal distribution cables do not use conventional hybrid 311M cables and are intended for internal equipment or panel wiring only. The SMPTE 304M end uses OEM style, non-cable-mount hybrid connectors and is terminated to insulated copper wire and individual, simplex breakout fibers. The component breakout end has ST, SC, or LC optical connectors, while the copper elements feature AMP or blunt ends.
As with all Gepco GHF cables, the breakout series is machine polished to meet or exceed all SMPTE 304M/311M standards.
GHFBK -
Length
-
(First End)
Connector Format
/
(Second End)
Fiber Breakout
(Second End)
Electrical Breakout
Fiber Connector Options
In Feet
PB = Bulkhead Plug
SB = Bulkhead Socket
ST = ST UPC
SC = SC UPC
LC = LC UPC
DSC = Duplex SC UPC
DLC = Duplex LC UPC
Standard Gender
A = 5-pin AMP Metal CPC (for mating with HDR & HDRA Racks)
B = 8-pin AMP CPC
C = 6-pin AMP MATE-N-LOCK Cap
D = Blunt
Reverse Gender
E = 5-pin Reverse Gender CPC - Inline or Panel Mount
F = 8-pin Reverse Gender CPC - Inline
G = 8-pin Reverse Gender CPC - Panel Mount
H = 6-pin Reverse Gender MATE-N-LOCK
ST SC
Electrical Connector Options
LC
A B
Standard Gender
C E F G
Reverse Gender
H www.gepco.com | 800.966.0069
9
FIBER SYSTEM SOLUTIONS
Hybrid Fiber Distribution Racks
The HDR system of hybrid fiber distribution racks distributes the electrical and fiber components of the
SMPTE hybrid connectors over separate optical and electrical components allowing for simplified in-wall installation. The discrete optical and electrical elements between boxes can now be interconnected with conventional distribution-type fiber and
Gepco's HDP electrical cable, thereby eliminating the need for specialized on-site hybrid fiber termination.
In addition, the HDR system offers improved field serviceability. The internal fiber jumpers can be easily replaced when damaged or worn, eliminating the costly need to completely replace the SMPTE hybrid connectors. The HDR chassis is constructed from rugged, powder-coated steel, all optical components feature machine-polished ceramic ferrules with ceramic sleeves, and the electrical connectors are rugged, metalshell CPC types.
F E AT U R E S & B E N E F I T S
Breaks Out Lemo HD Camera Connectors to Discrete
Electrical & Fiber Connectors
Machine-polished Optical Contacts & Ceramic Sleeves
Easy to Field Install
Replaceable Fiber Jumpers
Expandable up to Six Channels
1RU Chassis or 2RU Angeled Chassis Versions
Assemblies & Specifications
Part #
# of
Channels Connectors
Hybrid Fiber Distribution Rack
SMPTE 304M Connector to ST and Electrical Breakout
HDR-#x or
HDRA-#x
Part # Code
1, 2, 3, 4,
5, or 6
Front:
SMPTE 304M Hybrid Fiber
Connectors with Metal Dust
Caps (1 per channel)
Rear:
ST Female Metal Barrels
(Ceramic Sleeve) Internally
Coupled to Metal Body ST
Connectors (2 per channel)
AMP Metal-shell 5-pin CPC
Receptacle (1 per channel)
Dimensions
Chassis
Material/Color
Straight:
1.75” High
(1RU) x 19” Wide x 3” Deep
Angled:
3.5” High
(2 RU) x 19” Wide x 3 ¾” Deep
Angled Front Panel
Steel/Black x = Gender of Hybrid Fiber Connectors (P = Plug, S = Socket)
# = Number of Channels
Optical
Specifications Comments
Single-mode Optical Fiber, 8.3µ Mode Field,
125µ Cladding Diameter
>45dB @ 1310nm Return Loss ST Contacts
(PC Machine-polished)
>45dB @ 1310nm Return Loss Hybrid
Contacts (Machine-polished)
<0.50 dB @ 1310nm Total Insertion Loss per Fiber Element
SMPTE 304M Compliant
Lemo F2 fiber contacts in the hybrid connectors break out to two female ST connectors per channel. Auxiliary contacts, signal contacts and ground break out to the five contacts in the CPC connector.
One, two and three channel versions can be expanded to four.
Rear Panel Breakout per Channel AMP 5-pin: Front View
3
1
5
2
4
AMP 5-pin Electrical Pinout
Pin 1 = Gray signal conductor (low voltage)
Pin 2 = Red signal conductor (low voltage)
Pin 3 = White auxiliary conductor (high voltage)
Pin 4 = Black auxiliary conductor (high voltage)
Pin 5 = Ground
ST Fiber Code
Fiber A = Top blue fiber in hybrid connector
Fiber B = Lower yellow fiber in hybrid connector
10 www.gepco.com | 800.966.0069
FIBER SYSTEM SOLUTIONS
Hybrid Fiber Distribution Racks
HDR-4S Front View and HDR-4(P or S) Rear View
HDR-6P Front View and HDR-6(P or S) Rear View
Rear
Front
Rear
Front
HDRA-4S Front View and HDRA-4(P or S) Rear View
HDRA-6P Front View and HDRA-6(P or S) Rear View
Rear
Front
Front www.gepco.com | 800.966.0069
Rear
11
FIBER SYSTEM SOLUTIONS
12
Hybrid Fiber Breakout Boxes
The HBB series of portable SMPTE 304M boxes breaks out the hybrid camera connector to two ST female connectors on a recessed, protective metal top-plate with optional electrical connectors.
The breakout of the hybrid connector to discrete, industry-standard optical and electrical components allows for an HD camera to CCU interconnection over existing fiber tie-lines in facilities where hybrid fiber interconnects may not be present.
All optical components feature machine-polished ceramic ferrules and ceramic sleeves for superior optical alignment and low loss. The chassis is constructed from heavy-gage anodized aluminum for use in remote production environments. In addition to the standard configuration, the HBB breakout box is also available with XLR or 5-pin
AMP connectors that are hard wired to the power and/or signal components of the SMPTE hybrid connectors.
F E AT U R E S & B E N E F I T S
Breaks Out SMPTE 304M Connector to Interface with Existing SM Fiber Tie-lines
Machine-polished Optical Contacts & Ceramic Sleeves
Replaceable Fiber Jumpers
Rugged Aluminum Chassis
Optional XLR or 5-pin AMP Connectors
Includes Metal Dust Caps
Assemblies & Specifications
Part #
# of
Channels
Hybrid Fiber to ST Breakout Box
Three-channel, 9” Long Chassis
Connectors
HBB903xy 3 (6) Female ST Barrels with Dust Caps (Metal
Housing, Ceramic Sleeve)
Internally Coupled with
Metal Body ST Connectors with Ceramic Ferrules
(3) Hybrid Fiber SMPTE
304M Connector (Plug or Socket) with Metal
Dust Caps
Optional
Electrical Connector
(3) 5-pin Amp CPC
Connector
-or-
(3) Male or
Female XLR
(Power elements from fiber are not terminated.)
Also available without electrical connectors.
Chassis
Dimensions
4.5” High x
5.25” Wide x
9” Long
Chassis
Material
1/8” Extruded
Aluminum
(Black Anodized)
Hybrid Fiber to ST Breakout Box
Single-channel, Small Footprint Type
HBB901xy/4.5
Part # Code
1 (2) Female ST Barrels with Dust Caps (Metal
Housing, Ceramic Sleeve)
Internally Coupled with
Metal Body ST Connectors with Ceramic Ferrules
(1) 5-pin Amp CPC
Connector
-or-
4.5” High x
5.25” Wide x
4.5” Long
(1) Hybrid Fiber SMPTE
304M Connector (Plug or Socket) with Metal
Dust Caps
(1) Male or
Female XLR
(Power elements from fiber are not terminated.)
Also available without electrical connectors.
x = Gender of Lemo Connectors (P = Plug, S = Socket) y = Gender of Electrical Connectors (XF = Female XLRs, XM = Male XLRs, A = Amp 5-pin CPC)
1/8” Extruded
Aluminum
(Black Anodized)
Optical
Specifications
Single-mode Optical Fiber, 8.3µ Mode Field,
125µ Cladding Diameter
>45dB @ 1310nm Return Loss ST Contacts
(PC Machine-polished)
>45dB @ 1310nm Return Loss Lemo F2
Contacts (Machine-polished)
<0.50dB @ 1310nm Total Insertion Loss per Fiber Element
SMPTE 304M Compliant
Single-mode Optical Fiber, 8.3µ Mode Field,
125µ Cladding Diameter
>45dB @ 1310nm Return Loss ST Contacts
(PC Machine-polished)
>45dB @ 1310nm Return Loss Lemo F2
Contacts (Machine-polished)
<0.50dB @ 1310nm Total Insertion Loss per Fiber Element
SMPTE 304M Compliant www.gepco.com | 800.966.0069
Hybrid Fiber Breakout Boxes
HBB901 Top View HBB903 Top View
FIBER SYSTEM SOLUTIONS
HBB901 Side View
(SMPTE 304M Socket Side)
HBB903 Side View
(SMPTE 304M Plug Side)
HBB901 Side View
(Female XLR Side)
HBB903 Side View
(5-pin AMP CPC Side)
Side Panel Electrical Connector Options
AMP 5-Pin XLR Male XLR Female
AMP 5-pin: Front View
3
1
5
2
4
ST Fiber Code
Fiber A = Top blue fiber in hybrid connector
Fiber B = Lower yellow fiber in hybrid connector
AMP 5-pin Electrical Pinout (Optional)
Pin 1 = Gray signal conductor (low voltage)
Pin 2 = Red signal conductor (low voltage)
Pin 3 = White auxiliary conductor (high voltage)
Pin 4 = Black auxiliary conductor (high voltage)
Pin 5 = Ground
XLR Pinout (Optional)
Pin 1 = Ground
Pin 2 = Red signal conductor (low voltage)
Pin 3 = Gray signal conductor (low voltage)
Black & white power elements in hybrid fiber connector are floated with no connector.
www.gepco.com | 800.966.0069
13
FIBER SYSTEM SOLUTIONS
Hybrid Fiber Rack Accessories & Parts
REPLACEMENT PARTS AND TOOLS
Part Number
HDR-JMP-F2/ST
AMP-66182-1
AMP-305183
AMP-208719-1
CABLE MOUNT ELECTRICAL CONNECTORS
Part Number
AMP-208718-1
AMP-208945-5
AMP-66183-1
AMP-66181-1
Description
Replacement F2 to ST Internal Jumper
Replacement AMP Pins
AMP Pin Extraction Tool
Amp 5-pin Panel Mount Connector
Description
AMP 5-pin Cable Mount CPC Plug
AMP CPC Metal Shell with Clamp
Amp CPC Socket (for 26 - 20 AWG Wire)
Amp CPC Socket (for 18 - 16 AWG Wire)
14 www.gepco.com | 800.966.0069
FIBER SYSTEM SOLUTIONS
Cleaning Tools & Instructions
ALIGNMENT REMOVAL TOOLS
Part Number
DCS.F2.035.PN
Description
Dual-ended Tool for Plug-end Alignment Sleeve Removal of SMPTE 304M Connectors
DCS.91.F23.LA
Single-ended Tool for Plug-end Alignment Sleeve Removal of SMPTE 304M Connectors with Cotton Swab Resevoir
CLEANING SWABS AND TOOLS
MICROSCOPE KITS
CABLE TESTER
Part Number
WST.KI.125.34
GEP-HFCS
SCK-SC-250
SCK-SC-125
Description
Premoistened Cotton Swabs - Pack of 2
(One Dry, One Wet) for SMPTE 304M, ST,
SC, or LC Contacts
Bag of 100 Cotton Swabs (Not Premoistened) for SMPTE 304M, ST, SC, or LC Contacts
2
Quantity per Package
100
Cleaning Tool for Female Panel Mount ST, SC or Other 2.5mm Fiber Contacts
1 (525+ Cleaning Uses)
Cleaning Tool for Female Panel Mount LC or Other
1.25mm Fiber Contacts
1 (525+ Cleaning Uses)
Part Number
WST.CI.100.1A
WST.CI.201.1A
Description
Microscope Kit - Includes Scope, LCD Display, Positioner for F2 SMPTE 304M
Fiber Contacts, Positioner for 2.5mm Fiber Contacts, Battery and Charger,
DCS.F2.035.PN Extraction Tool, Carrying Case
Includes all of the Components in the Standard WST.CI.100.1A Kit, Plus a Visual
Fault Finder with Tip, Launch Cable for Fault Finder, and 50 Premoistened Cotton
Swabs
Part Number
FCT-FCKIT
Description
Field Test Set for SMPTE 304M Hybrid Fiber Cables - Tests for Insertion and Return
Loss, and Electrical Continuity for Shorts/Opens - Does not Fault Locate Damage www.gepco.com | 800.966.0069
15
FIBER SYSTEM SOLUTIONS
Hybrid Fiber Blank Panels
Gepco HBP panels offer a pre-engineered solution for the mounting of
SMPTE 304M hybrid fiber connectors in a 19” rack. Available in 1RU,
2RU, and angled 2RU versions, all panels feature Gepco’s unique Universal Punch Mount that allows for plug or socket connectors to be mounted in any position. Each position also features a hole for mounting the dust cap lanyard eyelets directly to the panel.
The HBP panels are used in the Direct Cable Termination method (see page four for system configuration details). When using HBP panels with pre-terminated cable assemblies, the connector body of the cable assembly can be removed, allowing for the assembly to be passed through the panel hole punch from the rear and reassembled from the front.
F E AT U R E S & B E N E F I T S
1RU, 2U, or Angled 2RU Versions
Universal Punch Mount Accommodates Plug or Socket
Connectors (Does Not Accommodate PEW Connectors)
Works with Lemo or Canare Brand Connectors
Additional Hole for Dust Cap Lanyard Mounting
Can Be Loaded with Pre-terminated Cable Assemblies
Angled 2RU Panel
PART NUMBER: HBPA-*U * Designates Number of Holes (1-6)
Straight 2RU Panel
PART NUMBER: HBP2-*U
* Designates Number of Holes (1-6)
Straight 1RU Panel
PART NUMBER: HBP1-*U
* Designates Number of Holes (1-6)
N e:: Custom panels are also available. Please contact Gepco for details.
Ideal for Use With Bulkhead or Breakout Hybrid Fiber Cable Assemblies:
16
Bulkhead Hybrid ((S ee ag In-line Breakout ((S ee ag www.gepco.com | 800.966.0069
Internal Breakout ((S ee ag
FIBER SYSTEM SOLUTIONS
Modular Isolation Panel System
Gepco’s modular isolation panel system is designed to provide flexibility and expansion capabilities for the mounting of hybrid fiber and triax connectors in a 19-inch rack format. The all-metal HMPF frame provides seven positions for the connector module mounts and is angled to reduce the bend radius and clearance required for the interfacing cables. Available in four types, the nonconductive plastic HMP modules provide electrical isolation between connectors and are available in
SMPTE 304M, Kings Tri-Loc, Neutrik OpticalCon® and blank versions.
F E AT U R E S & B E N E F I T S
Modular Design
Electrically Isolates Connectors
Angled Front Reduces Cable Bend Radius
All-metal Frame
Nonconductive Plastic Modules
Available for SMPTE 304M, Kings Tri-Loc and Neutrik OpticalCon® Connector Formats
Type
Modular Frame
SMPTE Universal Module
Triax Module
Neutrik OpticalCon® Module
Part Number
HMPF
Application
Angled 2RU Frame with Open Positions for up to 7 Modules
HMP-S
HMP-T
Material
Steel
Dimensions
2RU: 3.5"H x 19"W
Universal Punch Plug or Socket SMPTE 304M
Hybrid Fiber Connectors
Nonconductive
Plastic
2" x 2"
Triax Punch for Male or Female Kings Brand
Triax Connectors
Nonconductive
Plastic
2" x 2"
HMP-N
Punch for Neutrik
OpticalCon® Connector
Nonconductive
Plastic
2" x 2"
Blank Module HMP-B Blank Filler Module
Nonconductive
Plastic
2" x 2"
Ideal for Use With Bulkhead or Breakout Hybrid Fiber Cable Assemblies:
Bulkhead Hybrid ((S ee ag In-line Breakout ((S ee ag Internal Breakout ((S ee ag www.gepco.com | 800.966.0069
17
FIBER SYSTEM SOLUTIONS
Feedthrough Panels & Chassis
Gepco’s series of feedthrough panels provides a convenient, pre-engineered solution for bulkhead interfacing of general-purpose ST, SC or
LC optical fiber formats. Utilizing premium grade, zirconia sleeve connectors, Gepco feedthrough panels deliver precision optical alignment and low insertion loss. Available in two configurations, the flanged panel series provides extra rigidity to minimize panel flexing, while the chassis series provides a complete rear enclosure for cable management.
F E AT U R E S & B E N E F I T S
Precision, Zirconia Sleeve Connectors
Available with ST, SC, or LC Format Connectors
Flanged Panel Series for Extra Rigidity
Chassis Series for Integrated Cable Management
Black Anodized and Engraved
Part Number
FP1-xxST
FC1-xxST
FP1-xxSC
FC1-xxSC
FP1-xxSCD
FC1-xxSCD
FP1-xxLC
FC1-xxLC
FP1-xxLCD
FC1-xxLCD
Panel Type
Flat
Chassis
Connector Format
ST Feedthrough
Flat
Chassis
Flat
Chassis
Flat
Chassis
Flat
Chassis
SC Feedthrough
SC Duplex Feedthrough
LC Feedthrough
LC Duplex Feedthrough
Number of Positions
6, 8, 10, or 12
Dimensions
1RU: 1.75"W x 19"H
1RU: 1.75"H x 19"W x 3"D
6, 8, 10, or 12
1RU: 1.75"W x 19"H
1RU: 1.75"H x 19"W x 3"D
4, 6, or 8
6, 8, 10, or 12
6, 8, 10, or 12
1RU: 1.75"W x 19"H
1RU: 1.75"H x 19"W x 3"D
1RU: 1.75"W x 19"H
1RU: 1.75"H x 19"W x 3"D
1RU: 1.75"W x 19"H
1RU: 1.75"H x 19"W x 3"D
Additional Features
Zirconia Sleeve, Metal Dust Caps
Zirconia Sleeve, Spring Loaded
Shutter
Zirconia Sleeve
Zirconia Sleeve
Zirconia Sleeve, Spring Loaded
Shutter
18 www.gepco.com | 800.966.0069
FIBER SYSTEM SOLUTIONS
Custom Panels
In addition to pre-engineered panels, chassis, and distribution systems,
Gepco can custom design and manufacture panels to custom installation requirements. Panels can be fabricated from aluminum, steel, or stainless steel in a variety of colors, paint, or anodized finishes. Connector punches can be made for a complete range of broadcast and professional A/V connector formats. Engraving, filling, and custom silkscreening options finish off the complete customized interface solution for your venue or facility.
F E AT U R E S & B E N E F I T S
Completely Customized Panels
Aluminum, Steel or Stainless Steel
Wide Range of Connector Punches Available
Engraved, Filled or Silkscreened
Loaded with Connectors or Blank
Flat, Flanged, or Chassis Configurations
Connector Formats
ST Feedthrough
SC Feedthrough
LC Feedthrough
SMPTE 304M Plug Bulkhead
SMPTE 304M Socket Bulkhead
Neutrik OpticalCon®
TAC-4/12
BNC
Triax
Audio Connectors
Materials
Aluminum
Steel
Stainless Steel
Finishes
Annodized
Painted
Powder Coated
Engraved
Silk Screened www.gepco.com | 800.966.0069
19
FIBER SYSTEM SOLUTIONS
Lemo Hybrid Fiber SMPTE 304M Connectors
The original and industry standard in SMPTE 304M connectors, Lemo
3K series connectors deliver the performance and dependability required in demanding broadcast and production applications. These latest generation of Lemo 3K connectors feature an integrated cable grip collet, braid crimp, and strength member anchor for exceptional pull, bend, and strain relief. In addition, all exterior components are now machined from stainless steel for superior hardness and corrosion resistance. The F2 optical contacts deliver consistent end-face geometry and long-term mating life.
F E AT U R E S & B E N E F I T S
Original and Industry Standard HDTV Camera
Connector
Stainless Steel Exterior Components
Integrated Collet, Crimp, and Anchor Strain Relief
System
Precision F2 Optical Contacts
In-line Cable Mount, Chassis Cable Mount, and Breakout
Versions
Meets or Exceeds SMPTE 304M Standards
Part Number
FUW.3K.93C.TLMC96
Configuration Gender Cable Type
Cable Mount Plug 9.2mm
Notes
Heavy-duty Strain Relief & Stainless Steel Body
PUW.3K.93C.TLCC96
Cable Mount Socket 9.2mm
FUW.3K.93C.TLMC12
Cable Mount Plug 12mm
PUW.3K.93C.TLCC12
Cable Mount Socket 12mm
FMW.3K.93C.TLMC96Z
Panel Mount Plug 9.2mm
Heavy-duty Strain Relief & Stainless Steel Body
Heavy-duty 12mm Stainless Steel Body
Heavy-duty 12mm Stainless Steel Body
Square Flange with Mounting Holes, Stainless Steel
PBW.3K.93C.TLCC96Z
Panel Mount Socket 9.2mm
PEW.3K.93C.TLCC96Z
Panel Mount Socket 9.2mm
Square Flange with Mounting Holes
Round with Locking Ring, Stainless Steel
FXW.3K.93C.TLM
Panel Mount Plug Breakout Not for Cable Mount, OEM Devices Only, Stainless Steel
EDW.3K.93C.TLC
Panel Mount Socket Breakout Not for Cable Mount, OEM Devices Only, Stainless Steel
PSS.F2.BB2.LCE30
FFS.F2.BB2.LCE30
F2 Fiber Contact Plug 9.2mm or 12mm
For Use with any Lemo SMPTE 304M Plug: Requires 2 per
Connector
F2 Fiber Contact Socket 9.2mm or 12mm
For Use with any Lemo SMPTE 304M Socket: Requires
2 per Connector
20 www.gepco.com | 800.966.0069
FIBER SYSTEM SOLUTIONS
Canare Hybrid Fiber SMPTE 304M Connectors
Canare’s innovative SMPTE 304M connectors were designed for consistant performance, durability and simplified field cleaning. Canare
FC Hybrid Fiber connectors feature an integrated cable grip collet, braid crimp, and strength member anchor for exceptional pull, bend, and strain relief. All exterior components are made from high-polish, nickel-plated brass for exceptional hardness and corrosion resistance.
The Canare optical contacts deliver consistent end-face geometry and long-term mating life.
F E AT U R E S & B E N E F I T S
High-polish, Nickel-plated Brass Exterior Components
Unique, Easy-access End Face for Quick Cleaning
Integrated Collet, Crimp, and Anchor Strain Relief
System
Precision Optical Contacts
In-line Cable Mount, Chassis Cable Mount, and Breakout
Versions
Meets or Exceeds SMPTE 304M Standards
Part Number
FCF
Configuration
Cable Mount
Gender
Plug
FCM
FCFRC
Cable Mount
Panel Mount
Socket
Plug
FCMRC
FCFR
Panel Mount
Panel Mount
Socket
Plug
FCMR
FCA120
Panel Mount Socket Breakout
Cable or Panel Plug or Socket 12mm
Cable Type
9.2mm
9.2mm
9.2mm
9.2mm
Breakout
Notes
Heavy-duty Strain Relief Design
Heavy-duty Strain Relief Design
Square Flange with Mounting Holes
Square Flange with Mounting Holes
Not for Cable Mount, OEM Devices Only
Not for Cable Mount, OEM Devices Only
Adapter for Terminating 9.2mm Connectors to 12mm
Cable www.gepco.com | 800.966.0069
21
FIBER SYSTEM SOLUTIONS
SMPTE 304M Dust Caps, Boots & Installation Tools
These Gepco, Lemo, and Canare brand accessories provide additional protection, weather resistance, and flex-relief to SMPTE 304M series hybrid fiber connectors. The stainless steel dust caps protect the end face and optical fiber contacts from exterior contamination when the connector is unmated and not in use. They feature a heavy-gage, coated lanyard chain to virtually eliminate breakage and fraying. Overbody boots provide exceptional full-connector protection, while the standard boot option provides additional flex relief to the connector and cable.
Also available is the DCS series cable pulling adapter. This adapter replaces the connector body during cable installation, allowing for a pre-terminated hybrid fiber cable to be pulled in a permanent installation application.
F E AT U R E S & B E N E F I T S
Stainless Steel Dust Caps with Heavy Duty Lanyard
Overbody Boots for Full Connector Protection
Standard Flex-relief Boots
Cable Pulling Adapter for Installing Pre-terminated Cables
Part Number
HPDC
Description
Stainless Steel Dust Cap
Compatibility
Cable Mount Plug, Lemo or Canare
HSDC
HPDC-PM
HSDC-PM
Stainless Steel Dust Cap
Stainless Steel Dust Cap
Stainless Steel Dust Cap
Cable Mount Socket, Lemo or Canare
Panel Mount Plug, Lemo or Canare
Panel Mount Socket, Lemo or Canare
GMF.3K.085.EANZ
Full Body Plug Boot Lemo 9.2mm FUW Plug Cable Mount Connector
GMP.3K.085.EANZ
DCS.3K.175.72LN
GMA.3B.090.DN
GMA.4B.011.DN
CB29
Full Body Socket Boot
Cable Pulling Slug
Bend Relief Boot 9.2mm
Bend Relief Boot 12mm
Full Body Plug Boot
Lemo 9.2mm PUW Cable Mount Socket Connector
Temporarly Replaces Body of Lemo FUW, PUW, FMW, PBW, or PEW
Connectors for Pulling Cable in a Permanent Installation
Lemo 9.2mm FGW, PHW, FMW, PBW, or PEW Connectors
(Not Compatible with Standard FUW and PUW Connectors)
Lemo 12mm FGW or PHW Connectors
(Not Compatible with Standard FUW and PUW Connectors)
Canare FCM 9.2mm Socket Connector
CB30 Full Body Socket Boot Canare FCF 9.2mm Plug Connector
22 www.gepco.com | 800.966.0069
FIBER SYSTEM SOLUTIONS
Panel Mount Fiber Connectors
Feedthrough, panel mount, fiber connectors provide precision alignment and mating between two cable mount connectors. With the exception of the TAC-4/12 types, these connectors do not contain a ceramic ferrule or optical fiber elements. Terminated cables must be mated to both sides of the panel mount feedthough to complete the interconnect.
General purpose, industry standard ST, SC, and LC formats are available in multiple configurations, including shuttered versions for the SC and LC formats. Neutrik OpticalCon™ panel mount connectors use a
LC duplex format feedthough that is shuttered for contaminant protection. As with the standard LC feedthroughs, OpticalCon™ connectors require a duplex LC connector to complete the interconnect and panel wiring.
The TAC-4/12 panel mount connectors utilize fiber termini that must be bonded to the fiber and machine polished. The hermaphroditic design of the TAC-4/12 format permits the panel mount versions to be mated to either end of a TAC4/12 cable assembly.
F E AT U R E S & B E N E F I T S
Panel Mount Configurations
ST, SC, LC, and General-purpose Formats
Weather-tight Shuttered Versions Available
Zirconia Sleeves
Precision Optical Allignment
Neutrik OpticalCon®
TAC-4/12 Connectors
Connector Format
ST Feedthrough
SC Feedthrough
SC Feedthrough with
External Shutter
SC Feedthrough - Duplex
Part Number
216-101-E
Alignment Sleeve
Zirconia (Ceramic)
Manufacturer Mating
Senko Couples Two Male, Cable Mount STs
277-101-1N
222-101-1N (with Flange & Mounting Holes)
Zirconia (Ceramic) Senko Couples Two Male, Cable Mount SCs
227-101-1E
222-101-1E (with Flange & Mounting Holes)
Zirconia (Ceramic) Senko
227-201-1N
222-201-1N
(with Flange & Mounting Holes)
Zirconia (Ceramic) Senko
Couples Two Male, Cable Mount SCs
Couples Four Male, Cable Mount SCs
LC Feedthrough 999-111 Zirconia (Ceramic) Senko Couples Two Male, Cable Mount LCs
LC Feedthrough - Duplex
(SC Footprint)
999-411
999-311 (with Flange & Mounting Holes)
Zirconia (Ceramic) Senko Couples Four Male, Cable Mount LCs
LC Feedthrough - Duplex
(SC Footprint) with External Shutter
999-411-1E
999-311-1E (with Flange & Mounting Holes)
Zirconia (Ceramic) Senko
OpticalCon™- Optalloy Finish
IP65 Waterproof
NO2-4FDW
NO2-4FDW-1 (with Ground Tab)
Zirconia (Ceramic) Neutrik
OpticalCon™- Ruthenium Finish
IP65 Waterproof
Amphenol Four-channel
Tactical Connector
Amphenol Twelve-channel
Tactical Connector
NO2-4FDW-R
NO2-4FDW-1-R
1098080-A1
(with Ground Tab)
FS12A8080X111F
Couples Four Male, Cable Mount LCs
Zirconia (Ceramic) Neutrik
Uses Fiber Termini, not a Feedthrough Device
Amphenol
Uses Fiber Termini, not a Feedthrough Device
Amphenol
Mates with In-line Neutrik OpticalCon™ or Standard Duplex LC
Mates with In-line Neutrik OpticalCon™ or Standard Duplex LC
Must be terminated and machine polished with 6 Amphenol M29504/14
Termini, and 6 Amphenol M29504/15
Termini. Termini are sold separately.
Must be terminated and machine polished with 6 Amphenol M29504/14
Termini, and 6 Amphenol MIL29B1999C
Termini. Termini are sold separately.
www.gepco.com | 800.966.0069
23
FIBER SYSTEM SOLUTIONS
TAC-4 & TAC-12 Cable Assemblies
F E AT U R E S & B E N E F I T S
Factory Terminated in the USA
Machine Polished
4 or 12 Channels per Connector
Hermaphroditic Design Enables Mating to Cable or Panel Mount Connectors in Either Direction
Extra-rugged Metal Shell
Dust Cap Included
TAC-4 and TAC-12 cable assemblies by Gepco are built for the transmission of multiple optical fiber elements in hostile and portable applications. Each connector contains four or twelve elements in an extra-rugged, hermaphroditic connector shell. The hermaphroditic design enables cables to be mated to either
TAC-4/12 panel connectors or other TAC-
4/12 cables in any direction providing flexibility for cable link expansion and eliminating cables from being directionally misdeployed. Machine polished and terminated in the US, Gepco TAC-4/12 cables have exceptionally low return-loss and attenuation with consistent endface geometry. TAC-4/12 cables are available in almost any length and are custom terminated to user specifications.
24
Overall Specifications
Part #
GTS4-0-(length)
GTM4/50-0-(length)
GTM4/62-0-(length)
GTS12-0-(length)
GTM12/50-0-(length)
GTM12/62-0-(length)
# of Channels Connectors
(4) Single-mode Fiber
(2) Amphenol TAC-4,
SMPTE 358M
TAC-4 SMPTE 358M Hermaphroditc Assembly: Single-mode
Cable Type
Tactical, Polyurethane Jacket,
.220” Diameter
(4) 50 µm Multi-mode Fiber
(2) Amphenol TAC-4,
SMPTE 358M
Tactical, Polyurethane Jacket,
.220” Diameter
TAC-4 SMPTE 358M Hermaphroditc Assembly: 50 µm Multi-mode
(4) 62.5 µm Multi-mode Fiber
(2) Amphenol TAC-4,
SMPTE 358M
Tactical, Polyurethane Jacket,
.220” Diameter
TAC-4 SMPTE 358M Hermaphroditc Assembly: 62.5 µm Multi-mode
(12) Single-mode Fiber (2) Amphenol TAC-12
Tactical, Polyurethane Jacket,
.260” Diameter
TAC-12 Hermaphroditc Assembly: Single-mode
(12) 50 µm Multi-mode Fiber (2) Amphenol TAC-12
Tactical, Polyurethane Jacket,
.260” Diameter
TAC-12 Hermaphroditc Assembly: 50 µm Multi-mode
(12) 62.5 µm Multi-mode Fiber (2) Amphenol TAC-12
Tactical, Polyurethane Jacket,
.260” Diameter
TAC-12 Hermaphroditc Assembly: 62.5 µm Multi-mode
Mechanical Performance Specifications
Available Lengths
50', 100', 164', 250',
328', 500', 656', or Custom
50', 100', 164', 250',
328', 500', 656', or Custom
50', 100', 164', 250',
328', 500', 656', or Custom
50', 100', 164', 250',
328', 500', 656', or Custom
50', 100', 164', 250',
328', 500', 656', or Custom
50', 100', 164', 250',
328', 500', 656', or Custom
Minimum Bend Radius
1.8” (TAC-4), 2.1” (TAC-12)
Operating Temperature
-55°C to +85°C
Optical Performance Specifications
Fiber Type Cable Loss
< 0.5dB/km @ 1310/1550nm (Single-mode)
8.3 µm Single-mode Fiber,
50 µm Multi-mode Fiber, or
62.5 µm Multi-mode Fiber
< 3.5 dB/km @ 850nm (Multi-mode)
< 1dB/km @ 1300nm (Multi-mode)
Connector Loss
<.5dB
(per Connection)
Color
Black Cable Jacket
Black Finish Connector Body
Black Cable Jacket
Black Finish Connector Body
Black Cable Jacket
Black Finish Connector Body
Black Cable Jacket
Gray Finish Connector Body
Black Cable Jacket
Gray Finish Connector Body
Black Cable Jacket
Gray Finish Connector Body
Connector Back Reflection
-55dB RL (Typical),
-45dB RL (Max) www.gepco.com | 800.966.0069
FIBER SYSTEM SOLUTIONS
OpticalCon® Fiber Optic Cable Assemblies
F E AT U R E S & B E N E F I T S
Factory Terminated in the US
Machine Polished
Two Fiber Channels per Connector
Industry Standard LC Fiber Contacts
Unique Shutter Mechanism Protects Contacts from Damage and Contamination
-55dB Return Loss (Typical)
Ruggedized Body
Tactical Optical Fiber Cable
Neutrik OpticalCon® cable assemblies by Gepco provide a streamlined and ruggedized solution for the deployment and interfacing of optical fiber in commercial and professional A/V applications. The OpticalCon® connector features a ruggedized body design, high performance LC fiber contacts, and a unique shutter mechanism to protect against damage and contamination. Machine polished and terminated in the US, OpticalCon® assemblies by Gepco provide exceptionally low return-loss, attenuation, and consistent end-face geometry. OpticalCon® assemblies are available in almost any length and are custom terminated to user specifications.
Overall Specifications
Part #
# of
Channels
GNO2S-0-(length) Two Single-mode Fiber
Connectors
(2) Neutrik OpticalCon®, NO2SX
Cable Type
Tactical, Polyurethane Jacket,
5mm Diameter
Available Lengths
50', 100', 164', 250',
328', 500', 656', or Custom
Color
Black Cable Jacket
Nickle Finish Connector Body
OpticalCon® Cable Assembly: SINGLE-MODE
GNO2M-0-(length) Two Multi-mode Fiber (2) Neutrik OpticalCon®, NO2MX
Tactical, Polyurethane Jacket,
5mm Diameter
OpticalCon® Cable Assembly: MULTI-MODE
Mechanical Performance Specifications
Cable Retention Force
500N
Lifetime
>1000 Cycles
Optical Performance Specifications
Type Fiber Type
Insertion/Withdrawl Force
<45N
Cable Loss
50', 100', 164', 250',
328', 500', 656', or Custom
Operating Temperature
-25°C to +75°C
Connector Loss
Black Cable Jacket
Nickle Finish Connector Body
Minimum Bend Radius
4cm
Connector Back Reflection
LC-UPC (Straight Polish)
9 µm Single-mode Fiber or
50 µm Multi-mode Fiber
< 0.5dB/km @ 1310/1550nm (Single-mode)
< 3dB/km @ 850nm (Multi-mode)
< 1dB/km @ 1300nm (Multi-mode)
<.5dB
(per Connection)
-55dB RL (Typical),
-45dB RL (Max)
* OpticalCon is a registered trademark of Neutrik AG All Rights Reserved
Also Available with Cable Reeler
Add reeler part number to suffix.
Standard configuration has cable mount connector on both ends. Optional bulkhead on reel is also available. Add “B” to end of reeler suffix of part number.
GT310 GT380 GT520 www.gepco.com | 800.966.0069
25
FIBER SYSTEM SOLUTIONS
ST/SC/LC Tactical Snakes
F E AT U R E S & B E N E F I T S
Machine Polished -55dB SRL UPC Quality
100% Tested and Verified
Low Attenuation and Return Loss
Precision Fiber Connectors
Distribution and Breakout Versions
Heavy-duty Polyurethane Master Jacket
Ruggedized, Tactical Grade, Internal Construction
Optional Overboot Protects Connector Fanout
Gepco’s tactical optical fiber snakes are terminated with precision ST, SC, or LC format connectors to ruggedized, optical fiber snake cable for use in hostile environments. Available with single-mode or multi-mode optical fiber, tactical fiber cable assemblies come in two construction types: distribution and breakout. Distribution cables feature multiple tight-buffered fibers and an overall armid filler under a heavy-duty, polyurethane master jacket. Breakout versions have individual armid fillers and PVC jackets for each tight-buffered fiber, in addition to the overall polyurethane master jacket, to provide added protection. Precision machine polished to UPC standards,
Gepco tactical fiber optic snakes deliver the performance required in professional A/V and broadcast fiber optic formats.
26
G
Fiber
T
Number of Fibers Type
-
Length
-
(First End)
Connector Format
/
(Second End)
Connector Format
-
Overboot
S = Single-mode 9µ Fiber
M50 = Multi-mode 50µ Fiber
M62 = Multi-mode 62.5µ Fiber
10
12
18
24
02
04
06
08
D = Distribution
(Tight Buffer Fiber with Overall Armid Filler)
B = Breakout
(Armid Filler and PVC Jacket for Each Tight Buffer Fiber)
In Feet
ST = ST UPC
SC = SC UPC
LC = LC UPC
DSC = Duplex SC UPC
DLC = Duplex LC UPC
ST = ST UPC
SC = SC UPC
LC = LC UPC
DSC = Duplex SC UPC
DLC = Duplex LC UPC
(blank) = No Overboot
B = Overboot for Additional
Connector Protection
Example Part Numbers
GST02D-10-ST/ST (Single-mode 9µ Fiber, 2 Fibers, Distribution, 10 Feet, ST Connector First End, ST Connector Second End, No Boot Cover)
GST10B-25-SC/LC-B (Single-mode 9µ Fiber, 10 Fibers, Breakout, 25 Feet, SC Connector First End, LC Connector Second End, Overboot)
GM62T12D-12-LC/ST (Multi-mode 62.5µ Fiber, 12 Fibers, Distribution, 12 Feet, LC Connector First End, ST Connector Second End, No Boot Cover) www.gepco.com | 800.966.0069
ST/SC/LC Permanent Install Snakes
F E AT U R E S & B E N E F I T S
Machine Polished -55dB SRL UPC Quality
100% Tested and Verified
Low Attenuation and Return Loss
Precision Fiber Connectors
Distribution and Breakout Versions
Plenum or Riser Rated for Permanent Install
FIBER SYSTEM SOLUTIONS
Gepco’s optical fiber snakes are terminated with precision
ST, SC, or LC format connectors to plenum or riser rated cable for permanent installation. Available with single-mode or multi-mode optical fiber, permanent install cable assemblies come in distribution and breakout cable constructions. Precision machined polished to UPC standards, all Gepco fiber optic assemblies deliver the performance required in professional A/V and broadcast fiber optic formats.
G
Fiber UL Rating Number of Fibers Type
-
Length
-
(First End)
Connector Format
/
(Second End)
Connector Format
S = Single-mode 9µ Fiber
M50 = Multi-mode 50µ Fiber
M62 = Multi-mode 62.5µ Fiber
R = Riser Rated
P = Plenum Rated
08
12
18
24
01
02
04
06
30
36
48
60
72 (Riser Only)
D = Distribution
(Tight Buffer Fiber with Overall Armid Filler)
B = Breakout
(Armid Filler and PVC Jacket for Each Tight Buffer Fiber)
In Feet
ST = ST UPC
SC = SC UPC
LC = LC UPC
DSC = Duplex SC UPC
DLC = Duplex LC UPC
ST = ST UPC
SC = SC UPC
LC = LC UPC
DSC = Duplex SC UPC
DLC = Duplex LC UPC
Example Part Numbers
GSR02D-25-ST/ST (Single-mode 9µ Fiber, Riser Rated, 2 Fibers, Distribution, 25 Feet, ST Connector First End, ST Connector Second End)
GSP08B-50-SC/LC (Single-mode 9µ Fiber, Plenum Rated, 8 Fibers, Breakout, 50 Feet, SC Connector First End, LC Connector Second End)
GM62R12D-10-LC/ST (Multi-mode 62.5µ Fiber, Riser Rated, 12 Fibers, Distribution, 10 Feet, LC Connector First End, ST Connector Second End) www.gepco.com | 800.966.0069
27
FIBER SYSTEM SOLUTIONS
ST/SC/LC Simplex Cables
F E AT U R E S & B E N E F I T S
Machine Polished -55dB SRL UPC Quality
100% Tested and Verified
Low Attenuation and Return Loss
Precision Fiber Connectors
Plenum or Riser Rated for Permanent Install
Gepco’s optical fiber assemblies are terminated with precision ST, SC, or LC format connectors to plenum or riser rated cable for permanent installation. Available with single-mode or multi-mode optical fiber, simplex cable assemblies are precision machined polished to UPC standards. All Gepco fiber optic assemblies deliver the performance required in professional A/V and broadcast fiber optic formats.
28
G
Fiber UL Rating
01S -
Length
-
(First End)
Connector Format
/
(Second End)
Connector Format
S = Single-mode 9µ Fiber
M50 = Multi-mode 50µ Fiber
M62 = Multi-mode 62.5µ Fiber
R = Riser Rated
P = Plenum Rated
In Feet
ST = ST UPC
SC = SC UPC
LC = LC UPC
DSC = Duplex SC UPC
DLC = Duplex LC UPC
ST = ST UPC
SC = SC UPC
LC = LC UPC
DSC = Duplex SC UPC
DLC = Duplex LC UPC
Example Part Numbers
GSR01S-25-ST/ST (Single-mode 9µ Fiber, Riser Rated, 25 Feet, ST Connector First End, ST Connector Second End)
GSP01S-50-SC/LC (Single-mode 9µ Fiber, Plenum Rated, 50 Feet, SC Connector First End, LC Connector Second End)
GM62R01S-10-LC/ST (Multi-mode 62.5µ Fiber, Riser Rated, 10 Feet, LC Connector First End, ST Connector Second End) www.gepco.com | 800.966.0069
ST/SC/LC Duplex Cables
F E AT U R E S & B E N E F I T S
Machine Polished -55dB SRL UPC Quality
100% Tested and Verified
Low Attenuation and Return Loss
Precision Fiber Connectors
Plenum or Riser Rated for Permanent Install
FIBER SYSTEM SOLUTIONS
Gepco’s optical fiber assemblies are terminated with precision ST, SC, or LC format connectors to plenum or riser rated cable for permanent installation. Available with single-mode or multi-mode optical fiber, duplex cable assemblies are precision machined polished to UPC standards. All Gepco fiber optic assemblies deliver the performance required in professional A/V and broadcast fiber optic formats.
G
Fiber UL Rating
02Z -
Length
-
(First End)
Connector Format
/
(Second End)
Connector Format
S = Single-mode 9µ Fiber
M50 = Multi-mode 50µ Fiber
M62 = Multi-mode 62.5µ Fiber
R = Riser Rated
P = Plenum Rated
In Feet
ST = ST UPC
SC = SC UPC
LC = LC UPC
DSC = Duplex SC UPC
DLC = Duplex LC UPC
ST = ST UPC
SC = SC UPC
LC = LC UPC
DSC = Duplex SC UPC
DLC = Duplex LC UPC
Example Part Numbers
GSR02Z-25-ST/ST (Single-mode 9µ Fiber, Riser Rated, 25 Feet, ST Connector First End, ST Connector Second End)
GSP02Z-50-SC/LC (Single-mode 9µ Fiber, Plenum Rated, 50 Feet, SC Connector First End, LC Connector Second End)
GM62R02Z-10-LC/ST (Multi-mode 62.5µ Fiber, Riser Rated, 10 Feet, LC Connector First End, ST Connector Second End) www.gepco.com | 800.966.0069
29
FIBER SYSTEM SOLUTIONS
9.2mm Hybrid Fiber Optic: Extra Flexible
Fiber optic and copper conductor SMPTE 311M hybrid cable for High
Definition video cameras. In the hybrid 311M format, the HD video signal is transmitted over two single-mode optical fibers to ensure accurate and extended-distance data transmission. To increase the durability, a special nylon-based polymer with increased tensile strength is used for the fiber coatings, and a 16-gage steel strength member is cabled at the center of the cable core. All copper elements feature heat-resistant PE insulation and are shielded by a dense 95% copper braid. The outer jacket is a flexible, riser-rated PVC for permanent installation applications.
F E AT U R E S & B E N E F I T S
Extra-flexible TPE Jacket
Ultra-low Attenuation
SMPTE 311M Compliant
Single-mode Optical Glass Fibers
Proprietary Fiber Coating for Increased Tensile
Strength
Six Copper Conductors
Heat Resistant
Strength Member for Additional Durability
Copper Braid Shield
Mechanical Specifications (General)
Part #
HDC920
Nominal OD
9.2mm
Master Jacket (Type, Colors)
Flexible TPE, Black
Extra-flexible 9.2mm Hybrid Camera Cable
Mechanical Specifications (Components)
Overall Shield
95% TC Braid
Component
Optical
Number
2
Signal
Auxiliary
Strength Member
2
4
1
Electrical & Optical Specifications
Fiber
Attenuation
<0.70 dB/km
@ 1310/1550nm
Signal
Conductor
DCR
23.8 S/Mft
Power
Conductor
DCR
9.7 S/Mft
Type
Single Mode 8.3 µm Mode Field,
125 µm Cladding
24 AWG (7x32) Stranded TC
20 AWG (19x32) Stranded TC
16 AWG Stranded Steel
Shield
DCR
5.4 S/Mft
Insulation
Resistance
(Power or Signal)
>10M S/km
Insulation (Type, OD)
CPE Tight Buffer, .9mm
PE, .045”
PE, .060”
PVC, .084”
Dielectric
Strength
(Power or Signal)
3000 Volts RMS
@ 20°C, 60Hz for 1 min.
UL Type
AWM
Color Code
Approx. Weight
90 lbs/Mft
One Blue & One Yellow
One Red & One Gray
Two White & Two Black
One White
Operating
Temperature
-40°C to +75°C
(@ 0 to 95% humidity)
SMPTE
Standard
311M Compliant
(Meets or Exceeds)
30 www.gepco.com | 800.966.0069
FIBER SYSTEM SOLUTIONS
9.2mm Hybrid Fiber Optic: Permanent Install
Fiber optic and copper conductor SMPTE 311M hybrid cable for High
Definition video cameras. In the hybrid 311M format, the HD video signal is transmitted over two single-mode optical fibers to ensure accurate and extended-distance data transmission. To increase the durability, a special nylon-based polymer with increased tensile strength is used for the fiber coatings, and a 16 gage steel strength member is cabled at the center of the cable core. All copper elements feature heat-resistant PE insulation and are shielded by a dense 95% copper braid. The outer jacket is an extra-flexible, abrasion-resistant TPE comound that is ideal for portable, studio, and outdoor broadcast applications.
F E AT U R E S & B E N E F I T S
Riser-rated PVC Jacket
Ultra-low Attenuation
SMPTE 311M Compliant
Single-mode Optical Glass Fibers
Proprietary Fiber Coating for Increased Tensile
Strength
Six Copper Conductors
Heat Resistant
Strength Member for Additional Durability
Copper Braid Shield
Mechanical Specifications (General)
Part #
HDC920R
Nominal OD
9.2mm
Master Jacket (Type, Colors)
PVC, Black
Permanent Install 9.2mm Hybrid Camera Cable
Mechanical Specifications (Components)
Overall Shield
95% TC Braid
Component
Optical
Number
2
Signal
Auxiliary
Strength Member
2
4
1
Electrical & Optical Specifications
Fiber
Attenuation
<0.70 dB/km
@ 1310/1550nm
Signal
Conductor
DCR
23.8 S/Mft
Power
Conductor
DCR
9.7 S/Mft
Type
Single Mode 8.3 µm Mode Field,
125 µm Cladding
24 AWG (7x32) Stranded TC
20 AWG (19x32) Stranded TC
16 AWG Stranded Steel
Shield
DCR
5.4 S/Mft
Insulation
Resistance
(Power or Signal)
>10M S/km
Insulation (Type, OD)
CPE Tight Buffer, .9mm
PE, .045”
PE, .060”
PVC, .084”
Dielectric
Strength
(Power or Signal)
3000 Volts RMS
@ 20°C, 60Hz for 1 min.
UL Type
CMR
Color Code
Approx. Weight
91 lbs/Mft
One Blue & One Yellow
One Red & One Gray
Two White & Two Black
One White
Operating
Temperature
-40°C to +75°C
(@ 0 to 95% humidity)
SMPTE
Standard
311M Compliant
(Meets or Exceeds) www.gepco.com | 800.966.0069
31
FIBER SYSTEM SOLUTIONS
12mm Heavy-duty Hybrid Fiber Optic
Extra-durable 12mm Hybrid Fiber cable for improved durability in
High Definition camera to CCU interconnects. In addition to the steel strength member and nylon-based polymer fiber coating, each fiber optic element has a Kevlar wrap and PVC jacket for greater strength and protection. For the power elements,
HDC120P utilizes two auxiliary conductors for streamlined termination, thereby reducing the possibility of electrical faults. All copper elements now feature heat-resistant PE insulation and are shielded by a dense 95% copper braid. For additional durability, the outer jacket is made with an extra-tough polyurethane compound that is exceptionally abrasion and puncture resistant.
F E AT U R E S & B E N E F I T S
Heavy-duty Polyurethene Jacket
Ultra-low Attenuation
SMPTE 311M Compliant
Single-mode Optical Fibers with Kevlar & PVC
Jackets
Proprietary Fiber Coating for Increased Tensile
Strength
Four Large-gage Copper Conductors
Heat Resistant
Strength Member for Additional Durability
Mechanical Specifications
Part #
HDC120P
Nominal OD
12.0mm
Master Jacket (Type, Colors)
Polyurethane, Black
Heavy-duty 12mm Hybrid Fiber Camera Cable
Mechanical Specifications (Series)
Component Number Type
Optical 2
Single-mode Fiber Optic
(8.3 µm Mode Field, 125 µm Cladding)
Signal
Auxiliary
Strength Member
2
2
1
Electrical & Optical Specifications
Fiber
Attenuation
<0.70 dB/km
@ 1310/1550nm
Signal
Conductor
DCR
23.8 S/Mft
Power
Conductor
DCR
4.5 S/Mft
24 AWG (19x36) Stranded TC
16 AWG (65x34) Stranded TC
16 AWG Stranded Steel
Shield
DCR
2.6 S/Mft
Insulation
Resistance
(Power or Signal)
>10M S/km
Overall Shield
95% TC Braid
Insulation (Type, OD)
CPE Fiber Coating,
Kevlar Wrap,
Tight Tube PVC Jacket,
.062” Finished O.D.
PE, .044”
PE, .084”
PVC, .087”
Color Code
Approx. Weight
135 lbs/Mft
One Blue, One Yellow
One Red, One Gray
One White, One Black
One White
Dielectric
Strength
(Power or Signal)
3000 Volts RMS
@ 20°C, 60Hz for 1 min.
Operating
Temperature
-40°C to +75°C
(@ 0 to 95% humidity)
SMPTE
Standard
311M Compliant
(Meets or Exceeds)
32 www.gepco.com | 800.966.0069
FIBER SYSTEM SOLUTIONS
16mm Heavy-duty Hybrid Fiber Optic
Fiber optic and copper conductor SMPTE 311M hybrid cable for High
Definition video cameras. In the hybrid 311M format, the HD video signal is transmitted over two single-mode optical fibers to ensure accurate and extended-distance data transmission. To increase the durability, a special nylon-based polymer with increased tensile strength is used for the fiber coatings, and a 16 gage steel strength member is cabled at the center of the cable core. All copper elements now feature heat-resistant PE insulation and are shielded by a dense 95% copper braid.
The HDC160 features a double-jacket construction for extra durability and increased diameter.
F E AT U R E S & B E N E F I T S
Double (PU & PVC) Jackets
Ultra-low Attenuation
SMPTE 311M Compliant
Single-mode Optical Glass Fibers
Proprietary Fiber Coating for Increased Tensile
Strength
Six Copper Conductors
Heat Resistant
Strength Member for Additional
Durability
Copper Braid Shield
Mechanical Specifications (General)
Part #
HDC160
Nominal OD
16.0mm
Inner Jacket (Type, Colors, Diameter)
Flexible PVC, Black, 9.2mm
Extra-flexible 16mm Hybrid Camera Cable
Mechanical Specifications (Components)
Outer Jacket (Type, Colors)
Polyurethane, Black
Component
Optical
Number
2
Signal
Auxiliary
Strength Member
2
4
1
Electrical & Optical Specifications
Fiber
Attenuation
<0.70 dB/km
@ 1310/1550nm
Signal
Conductor
DCR
23.8 S/Mft
Power
Conductor
DCR
9.7 S/Mft
Type
Single Mode 8.3 µm Mode Field,
125 µm Cladding
24 AWG (7x32) Stranded TC
20 AWG (19x32) Stranded TC
16 AWG Stranded Steel
Shield
DCR
5.4 S/Mft
Insulation
Resistance
(Power or Signal)
>10M S/km
Insulation (Type, OD)
CPE Tight Buffer, .9mm
PE, .045”
PE, .060”
PVC, .084”
Dielectric
Strength
(Power or Signal)
3000 Volts RMS
@ 20°C, 60Hz for 1 min.
Overall Shield
95% TC Braid
Color Code
Approx. Weight
195 lbs/Mft
One Blue & One Yellow
One Red & One Gray
Two White & Two Black
One White
Operating
Temperature
-40°C to +75°C
(@ 0 to 95% humidity)
SMPTE
Standard
311M Compliant
(Meets or Exceeds) www.gepco.com | 800.966.0069
33
FIBER SYSTEM SOLUTIONS
HD Camera Electrical Cable
Unique electrical cables constructed from only the copper elements utilized in the hybrid fiber camera cables. When used with singlemode fiber optic cables and the Gepco HDR hybrid fiber distribution rack, the HDP series provides an alternative to permanently installing rack-to-rack infrastructure wiring. Gepco’s breakout system consists of an HDR distribution rack that allows for a hybrid fiber connector’s elements to be distributed over separate copper and optical cables. This system greatly simplifies on-site HD camera permanent installation cabling and termination. The HD series is UL-rated and available in plenum and riser versions.
F E AT U R E S & B E N E F I T S
Specialized Electrical-only Design
Four Large-gage Copper Conductors
Heat Resistant
Tinned-copper Braid Shield
Riser or Plenum Rated
Mechanical Specifications
Part #
HDP221
HDP221P
# of
Conductors
2 Auxiliary
2 Signal
Nominal
OD
.315”
Auxiliary
Conductors
16 AWG
(65x34)
Stranded TC
Single-channel HD Electrical Cable
2 Auxiliary
2 Signal
.205”
16 AWG
(65x34)
Stranded TC
Single-channel HD Electrical Cable: Plenum
Electrical & Optical Specifications
Signal
Conductor
DCR
Power
Conductor
DCR
Shield
DCR
Auxiliary
Insulation
(Type, OD)
PE, .020”
FEP, .010”
Insulation
Resistance
(Power or Signal)
15.3 S/Mft 4.5 S/Mft 2.6 S/Mft >10M S/km
N e:: Speed-wrap or multi-pair jacket versions available upon special request.
Signal
Conductors
22 AWG
(19x34)
Stranded TC
22 AWG
(19x34)
Stranded TC
Signal
Insulation
PE, .015”
FEP, .010”
Shield
90% TC
Braid
90% TC
Braid
Jacket
(Type, Colors)
PVC,
Black
UL
Type
CMR
Approx.
Weight
76 lbs/Mft
Plenum PVC,
White
CMP
58 lbs/Mft
Dielectric
Strength
(Power or Signal)
3000 Volts RMS
@ 20°C, 60Hz for 1 min.
Operating
Temperature
-40°C to +75°C
(@ 0 to 95% humidity)
SMPTE
Standard
Compliant with Electrical Specifications for SMPTE 311M
34 www.gepco.com | 800.966.0069
FIBER SYSTEM SOLUTIONS
Three-channel Fiber Cable
The HDC3R three-position hybrid fiber cable is a unique solution for the distribution of up to three SMPTE hybrid fiber camera positions in a permanent installation application. Each channel within the
HDC3R features a group of elements that consist of two singlemode fibers, two auxiliary copper conductors, two signal copper conductors, and a foil shield with drain wire. The foil shields feature nonconductive backings and edges to provide electrical isolation between the three shields. The single-mode fiber elements feature a breakout-style Kevlar and PVC jacket construction for added durability and secure connector termination. The PVC jacket is orange with a yellow stripe for easy identification and has a low-friction surface for easy installation through conduit.
F E AT U R E S & B E N E F I T S
Unique Hybrid Composite Construction
Low-loss Single-mode Optical Fiber
Three Groups of Fiber and Copper
Elements
Interconnects up to Three SMPTE 304M Based
HD Camera Systems
Cost Effective
UL Riser Rated
Mechanical Specifications (General)
Part #
HDC3R
Nominal OD
.600”
Three-channel Hybrid Fiber Camera Cable
Mechanical Specifications (Components)
Component Number Type
Optical 6 (3 Groups of 2)
Master Jacket (Type, Colors)
PVC, Orange with Yellow Stripe
Single-mode Fiber Optic
(8.3 µm Mode Field, 125 µm Cladding)
Signal 6 (3 Groups of 2) 24 AWG (17x32) Stranded TC
Insulation (Type, OD)
PVC Fiber Coating,
Kevlar Wrap,
Tube PVC Jacket,
3mm Finished O.D.
PVC, .040”
UL Type
CMR
Color Code
Approx. Weight
170 lbs/Mft
Yellow with Alphanumeric Print
Auxiliary 6 (3 Groups of 2) 18 AWG (19x30) Stranded TC PVC, .082”
Shield 3 (1 per Group) 100% Foil with 24 AWG (7x32) Stranded TC Drain
Electrical & Optical Specifications
Fiber
Attenuation
<0.70 dB/km
@ 1310/1550nm
Signal
Conductor
DCR
23.8 S/Mft
Power
Conductor
DCR
6.0 S/Mft
Insulation
Resistance
(Power or Signal)
>10M S/km
-----
Dielectric
Strength
(Power or Signal)
3000 Volts RMS
@ 20°C, 60Hz for 1 min.
One Red, One Gray (Solid or with Yellow or Orange Stripe)
One White, One Black (Solid or with Yellow or Orange Stripe)
-----
Operating
Temperature
-40°C to +75°C
(@ 0 to 95% humidity) www.gepco.com | 800.966.0069
35
FIBER SYSTEM SOLUTIONS
Single-mode Optical Fiber: Permanent Installation
Low-loss, single-mode, fiber optic cable available in breakout and distribution type constructions, UL plenum or riser rated. The modal dispersion characteristics of single-mode glass enable transmission of high bit-rate data, thereby making this fiber type ideal, and the standard, for HD video signal transmission. When used in conjunction with Gepco electrical HD cables and the
HDR distribution rack system, FS Series fiber can be used for the optical interconnect between camera positions.
F E AT U R E S & B E N E F I T S
Low-loss, Single-mode Optical Glass Fibers
Distribution & Breakout Type Constructions
Armid Filler
1 Through 144 Elements
PVC or PVDF Jacket
Riser or Plenum Rated
36
Fiber Specifications
Type
Single Mode
Mechanical Specifications
Mode Field Diameter
8.3 µm
Cladding Diameter
125 µm
Maximum Attenuation
≤ 0.70 dB/Km @ 1310/1550nm
Part #
FSD**R
*=Number of Elements
FSD**P
*=Number of Elements
FSB**R
*=Number of Elements
FSB**P
*=Number of Elements
Fiber
Buffer
Number of
Elements
Acrylate Tight Buffer
Coating ( .9mm OD) with Overall
Armid Filler
8
12
24
36
2
4
6
Single-mode Distribution: Riser Rated
Acrylate Tight Buffer
Coating ( .9mm OD) with Overall
Armid Filler
2
4
6
8
12
24
36
Single-mode Distribution: Plenum Rated
Acrylate Tight Buffer
Coating ( .9mm OD) with Armid Filler &
PVC Tube Jacket for
Each Fiber
6
8
12
24
36
2
4
1 (Simplex)
2 (Duplex)
Single-mode Breakout: Riser Rated
Acrylate Tight Buffer
Coating ( .9mm OD) with Armid Filler & Plenum
PVC or PVDF Tube Jacket for Each Fiber
6
8
12
24
36
2
4
1 (Simplex)
2 (Duplex)
Single-mode Breakout: Plenum Rated
Nominal
OD
.180”
.200”
.220”
.240”
.260”
.330”
.350”
.160”
.180”
.200”
.220”
.220”
.280”
.310”
.110”
.110”x.230”
.280”
.310”
.370”
.450”
.490”
.690”
.790”
.110”
.110”x.230”
.240”
.240”
.280”
.330”
.390”
.510”
.630”
Outer
Jacket
PVC
PVC
PVC
PVC
PVC
PVC
PVC
PVC
PVC
PVC
PVC
PVC
PVC
PVC
PVC
PVC
Plenum PVC
Plenum PVC
Plenum PVC
Plenum PVC
Plenum PVC
PVDF
PVDF
Plenum PVC
Plenum PVC
PVDF
PVDF
PVDF
PVDF
PVDF
PVDF
PVDF
Other fiber counts available up to 144 elements. Please consult Gepco for details.
Call for color availability.
270 lbs
270 lbs
310 lbs
360 lbs
400 lbs
670 lbs
670 lbs
110 lbs
220 lbs
270 lbs
450 lbs
670 lbs
900 lbs
1350 lbs
2250 lbs
3150 lbs
110 lbs
220 lbs
360 lbs
360 lbs
540 lbs
720 lbs
1080 lbs
1620 lbs
2160 lbs
Maximum Tension
Installation
(Pulling)
310 lbs
310 lbs
310 lbs
360 lbs
600 lbs
670 lbs
670 lbs
Operating
100 lbs
100 lbs
100 lbs
120 lbs
135 lbs
220 lbs
220 lbs
90 lbs
90 lbs
100 lbs
120 lbs
135 lbs
220 lbs
220 lbs
70 lbs
110 lbs
110 lbs
180 lbs
270 lbs
380 lbs
560 lbs
850 lbs
1350 lbs
70 lbs
110 lbs
90 lbs
90 lbs
130 lbs
180 lbs
270 lbs
400 lbs
540 lbs
2”
2”
4.2”
4.7”
5.6”
6.8”
7.4”
10.4”
11.9”
2.4”
2.7”
3.0”
3.3”
3.3”
4.2”
4.7”
2”
2”
3.6”
3.6”
4.2”
5.0”
5.9”
7.7”
9.5”
Minimum Bend Radius
Installation
(Pulling)
2.7”
3.0”
3.3”
3.6”
3.9”
5.0”
5.3”
Operating
1.8”
2.0”
2.2”
2.4”
2.6”
3.3”
3.5”
Weight
14 lbs/Mft
17 lbs/Mft
19 lbs/Mft
22 lbs/Mft
25 lbs/Mft
44 lbs/Mft
51 lbs/Mft
1.2”
1.2”
2.8”
3.1”
3.7”
4.5”
4.9”
6.9”
7.9”
1.6”
1.8”
2.0”
2.2”
2.2”
4.2”
4.7”
1.2”
1.2”
3.6”
3.6”
4.2”
5.0”
5.9”
7.7”
9.5”
9 lbs/Mft
11 lbs/Mft
15 lbs/Mft
19 lbs/Mft
19 lbs/Mft
36 lbs/Mft
52 lbs/Mft
5 lbs/Mft
11 lbs/Mft
34 lbs/Mft
44 lbs/Mft
55 lbs/Mft
75 lbs/Mft
101 lbs/Mft
183 lbs/Mft
214 lbs/Mft
6 lbs/Mft
12 lbs/Mft
23 lbs/Mft
23 lbs/Mft
32 lbs/Mft
48 lbs/Mft
63 lbs/Mft
99 lbs/Mft
154 lbs/Mft
UL
Type
OFNR
OFNP
OFNR
OFNP www.gepco.com | 800.966.0069
FIBER SYSTEM SOLUTIONS
Multi-mode Optical Fiber: Permanent Installation
Indoor/outdoor distribution multi-mode fiber for audio, video, or data networking applications. This series is available in both breakout and distribution type constructions. Distribution types feature individually coated fibers with an overall Kevlar filler and jacket.
Breakout types have individual Kevlar fillers and tube jackets over each individual fiber for added strength and durability when breaking out the individual fibers. Both types are available in plenum and riser constructions for permanent installation in almost any environment.
F E AT U R E S & B E N E F I T S
Low-loss, Multi-mode Optical Glass Fibers
Distribution & Breakout Type Constructions
Armid Filler
1 Through 144 Elements
PVC or PVDF Jacket
Riser or Plenum Rated
Fiber Specifications
Type
Multi-mode
Mechanical Specifications
Mode Field Diameter
62.5 µm or 50 µm
Cladding Diameter
125 µm
Maximum Attenuation
3.50 dB/Km @ 850nm, 1.00 dB/Km @ 1550nm
Part #
FMD**R
(62.5 µm fiber) or
FMD**R/50
(50 µm fiber)
*=Number of Elements
FMD**P
(62.5 µm fiber) or
FMD**P/50
(50 µm fiber)
*=Number of Elements
FMB**R
(62.5 µm fiber) or
FMB**R/50
(50 µm fiber)
*=Number of Elements
FMB**P
(62.5 µm fiber) or
FMB**P/50
(50 µm fiber)
*=Number of Elements
Fiber
Buffer
Number of
Elements
Acrylate Tight Buffer
Coating ( .9mm OD) with Overall
Armid Filler
8
12
24
36
2
4
6
Multi-mode Distribution Fiber: Riser Rated
Nominal
OD
.180”
.200”
.220”
.240”
.260”
.330”
.350”
Acrylate Tight Buffer
Coating ( .9mm OD) with Overall
Armid Filler
2
4
6
8
12
24
36
Multi-mode Distribution Fiber: Plenum Rated
.160”
.180”
.200”
.220”
.220”
.280”
.310”
Acrylate Tight Buffer
Coating ( .9mm OD) with Armid Filler &
PVC Tube Jacket for
Each Fiber
6
8
12
24
36
2
4
1 (Simplex)
2 (Duplex)
Multi-mode Breakout Fiber: Riser Rated
.110”
.110”x.230”
.280”
.310”
.370”
.450”
.490”
.690”
.790”
Acrylate Tight Buffer
Coating ( .9mm OD) with Armid Filler & Plenum
PVC or PVDF Tube Jacket for Each Fiber
6
8
12
24
36
2
4
1 (Simplex)
2 (Duplex)
Multi-mode Breakout Fiber: Plenum Rated
.110”
.110”x.230”
.240”
.240”
.280”
.330”
.390”
.510”
.630”
PVC
PVC
PVC
PVC
PVC
PVC
PVC
PVC
PVC
Outer
Jacket
PVC
PVC
PVC
PVC
PVC
PVC
PVC
Plenum PVC
Plenum PVC
Plenum PVC
Plenum PVC
Plenum PVC
PVDF
PVDF
Plenum PVC
Plenum PVC
PVDF
PVDF
PVDF
PVDF
PVDF
PVDF
PVDF
Other fiber counts available up to 144 elements. Please consult Gepco for details.
Call for color availability.
270 lbs
270 lbs
310 lbs
360 lbs
400 lbs
670 lbs
670 lbs
110 lbs
220 lbs
270 lbs
450 lbs
670 lbs
900 lbs
1350 lbs
2250 lbs
3150 lbs
110 lbs
220 lbs
360 lbs
360 lbs
540 lbs
720 lbs
1080 lbs
1620 lbs
2160 lbs
Maximum Tension
Installation
(Pulling)
310 lbs
310 lbs
310 lbs
360 lbs
600 lbs
670 lbs
670 lbs
Operating
100 lbs
100 lbs
100 lbs
120 lbs
135 lbs
220 lbs
220 lbs
90 lbs
90 lbs
100 lbs
120 lbs
135 lbs
220 lbs
220 lbs
70 lbs
110 lbs
110 lbs
180 lbs
270 lbs
380 lbs
560 lbs
850 lbs
1350 lbs
70 lbs
110 lbs
90 lbs
90 lbs
130 lbs
180 lbs
270 lbs
400 lbs
540 lbs
2”
2”
4.2”
4.7”
5.6”
6.8”
7.4”
10.4”
11.9”
2.4”
2.7”
3.0”
3.3”
3.3”
4.2”
4.7”
2”
2”
3.6”
3.6”
4.2”
5.0”
5.9”
7.7”
9.5”
Minimum Bend Radius
Installation
(Pulling)
2.7”
3.0”
3.3”
3.6”
3.9”
5.0”
5.3”
Operating
1.8”
2.0”
2.2”
2.4”
2.6”
3.3”
3.5”
Weight
14 lbs/Mft
17 lbs/Mft
19 lbs/Mft
22 lbs/Mft
25 lbs/Mft
44 lbs/Mft
51 lbs/Mft
1.2”
1.2”
2.8”
3.1”
3.7”
4.5”
4.9”
6.9”
7.9”
1.6”
1.8”
2.0”
2.2”
2.2”
4.2”
4.7”
1.2”
1.2”
3.6”
3.6”
4.2”
5.0”
5.9”
7.7”
9.5”
9 lbs/Mft
11 lbs/Mft
15 lbs/Mft
19 lbs/Mft
19 lbs/Mft
36 lbs/Mft
52 lbs/Mft
5 lbs/Mft
11 lbs/Mft
34 lbs/Mft
44 lbs/Mft
55 lbs/Mft
75 lbs/Mft
101 lbs/Mft
183 lbs/Mft
214 lbs/Mft
6 lbs/Mft
12 lbs/Mft
23 lbs/Mft
23 lbs/Mft
32 lbs/Mft
48 lbs/Mft
63 lbs/Mft
99 lbs/Mft
154 lbs/Mft
UL
Type
OFNR
OFNP
OFNR
OFNP www.gepco.com | 800.966.0069
37
FIBER SYSTEM SOLUTIONS
Single-mode Optical Fiber: Tactical
Exceptionally rugged, light-weight, single-mode fiber optic cables for portable applications in harsh environments. Available in both distribution and breakout style constructions, all tactical cables feature an abrasion-, chemical-, and cut-resistant outer polyurethane jacket. The 125µm single-mode fiber elements are coated with a 900µm, hard elastomeric, tight-buffer.
Available in two series, the distribution series features an armid strength member filler for exceptional strength, while the breakout series features armid strength members within a tube elastomeric jacket for each fiber to provide additional strength and crush resistance.
F E AT U R E S & B E N E F I T S
Exceptionally Rugged
Crush Resistant
Low-loss Single-mode Fiber
Distribution & Breakout Type
Constructions
Armid Filler
Polyurethane Outer Jacket
Meets or Exceeds TIA/EIA Mil
Fiber Specifications
Type
Single-mode
Mode Field Diameter
8.3 µm
Cladding Diameter
125 µm
Maximum Attenuation
≤ 0.50 dB/Km @ 1310/1550nm
Mechanical Specifications
Part #
FSD**T
*=Number of Elements
Fiber
Buffer
Acrylate Tight
Buffer Coating
( .9mm OD) with Overall
Kevlar Filler
Outer
Jacket
PU,
Black
Crush
Resistance
440
N/cm
Tactical Single-mode Fiber: Distribution
Impact
Resistance
200
Impacts
Flex
Resistance
2000
Cycles
Operating
Temp.
Storage
Temp.
-55°C to
+85°C
-70°C to
+85°C
12
18
24
6
8
2
4
10
Number of
Elements
Tensile Load Minimum Bend Radius
Nominal
OD
.200”
.220”
.240”
.260”
.260”
.260”
.300”
.330”
Short
Term
Long
Term
Installation
(Pulling)
1,800 lbs 600 lbs
1,800 lbs 600 lbs
1,800 lbs 600 lbs
1,800 lbs 600 lbs
2,100 lbs 700 lbs
3.2”
3.6”
3.8”
4.2”
4.2”
2,100 lbs 700 lbs
2,400 lbs 800 lbs
4.2”
4.8”
3,000 lbs 1000 lbs 5.4”
Operating
1.6”
1.8”
1.9”
2.1”
2.1”
2.1”
2.4”
2.7”
Weight
15 lbs/Mft
19 lbs/Mft
19 lbs/Mft
26 lbs/Mft
30 lbs/Mft
34 lbs/Mft
40 lbs/Mft
50 lbs/Mft
FSB**T
*=Number of Elements
Acrylate Tight
Buffer Coating
( .9mm OD) with Kevlar
Filler & PVC
Tube Jacket for Each Fiber
PU,
Black
440
N/cm
200
Impacts
2000
Cycles
-55°C to
+85°C
-70°C to
+85°C
10
12
18
24
2
4
6
8
.260”
.290”
.340”
.390”
.450”
.480”
.570”
.570”
2,200 lbs 550 lbs
2,200 lbs 550 lbs
2,400 lbs 600 lbs
3,200 lbs 800 lbs
4.2”
4.6”
5.4”
6.2”
4,000 lbs 1000 lbs 7.2”
4,800 lbs 1200 lbs 7.6”
7,200 lbs 1,800 lbs 9.2”
9,600 lbs 2,400 lbs 9.2”
2.1”
2.3”
2.7”
3.1”
3.6”
3.8”
4.6”
4.6”
21 lbs/Mft
28 lbs/Mft
36 lbs/Mft
50 lbs/Mft
59 lbs/Mft
65 lbs/Mft
73 lbs/Mft
105 lbs/Mft
Tactical Single-mode Fiber: Breakout
38 www.gepco.com | 800.966.0069
FIBER SYSTEM SOLUTIONS
Multi-mode Optical Fiber: Tactical
Exceptionally rugged, light-weight, single-mode fiber optic cables for portable applications in harsh environments. Available in both distribution and breakout style constructions, all tactical cables feature an abrasion-, chemical-, and cut-resistant outer polyurethane jacket. The 125µm multi-mode fiber elements are coated with a 900µm, hard elastomeric, tight buffer.
Available in two series, the distribution series features an armid strength member filler for exceptional strength, while the breakout series features armid strength members within a tube elastomeric jacket for each fiber to provide additional strength and crush resistance.
F E AT U R E S & B E N E F I T S
Exceptionally Rugged
Crush Resistant
Low-loss Multi-mode Fiber
Distribution & Breakout Type
Constructions
Armid Filler
Polyurethane Outer Jacket
Meets or Exceeds TIA/EIA Mil
Fiber Specifications
Type
Multi-mode
Mode Field Diameter
62.5 µm or 50 µm
Cladding Diameter
125 µm
Maximum Attenuation
≤ 3.50 dB/Km @ 850nm,
≤ 1.00 dB/Km @ 1550nm
Mechanical Specifications
Part #
FMD**T
(62.5 µm fiber) or
FMD**T/50
(50 µm fiber)
*=Number of Elements
Fiber
Buffer
Acrylate Tight
Buffer Coating
( .9mm OD) with Overall
Kevlar Filler
Outer
Jacket
Crush
Resistance
Impact
Resistance
Flex
Resistance
PU,
Black
440
N/cm
200
Impacts
2000
Cycles
Operating
Temp.
-55°C to
+85°C
Tensile Load Minimum Bend Radius
Storage
Temp.
-70°C to
+85°C
10
12
18
24
6
8
2
4
Number of
Elements
Nominal
OD
.200”
.220”
.240”
.260”
.260”
.260”
.300”
.330”
Short
Term
Long
Term
Installation
(Pulling)
1,800 lbs 600 lbs
1,800 lbs 600 lbs
1,800 lbs 600 lbs
1,800 lbs 600 lbs
3.2”
3.6”
3.8”
4.2”
2,100 lbs 700 lbs
2,100 lbs 700 lbs
4.2”
4.2”
2,400 lbs 800 lbs 4.8”
3,000 lbs 1000 lbs 5.4”
Operating
1.6”
1.8”
1.9”
2.1”
2.1”
2.1”
2.4”
2.7”
Weight
15 lbs/Mft
19 lbs/Mft
19 lbs/Mft
26 lbs/Mft
30 lbs/Mft
34 lbs/Mft
40 lbs/Mft
50 lbs/Mft
Tactical Multi-mode Fiber: Distribution
FMB**T
(62.5 µm fiber) or
FMB**T/50
(50 µm fiber)
Acrylate Tight
Buffer Coating
( .9mm OD) with Kevlar
Filler & PVC
Tube Jacket for Each Fiber
PU,
Black
*=Number of Elements
440
N/cm
Tactical Multi-mode Fiber: Breakout
200
Impacts
2000
Cycles
-55°C to
+85°C
-70°C to
+85°C
8
10
12
2
4
6
18
24
.260”
.290”
.340”
.390”
.450”
.480”
.570”
.570”
2,200 lbs 550 lbs
2,200 lbs 550 lbs
2,400 lbs 600 lbs
4.2”
4.6”
5.4”
3,200 lbs 800 lbs 6.2”
4,000 lbs 1000 lbs 7.2”
4,800 lbs 1200 lbs 7.6”
7,200 lbs 1,800 lbs 9.2”
9,600 lbs 2,400 lbs 9.2”
2.1”
2.3”
2.7”
3.1”
3.6”
3.8”
4.6”
4.6”
21 lbs/Mft
28 lbs/Mft
36 lbs/Mft
50 lbs/Mft
59 lbs/Mft
65 lbs/Mft
73 lbs/Mft
105 lbs/Mft www.gepco.com | 800.966.0069
39
FIBER SYSTEM SOLUTIONS
40
PART NUMBER INDEX
Part Number
222-101-1N
Part Number
Page
23
www.gepco.com | 800.966.0069
Page
Corporate Headquarters and Main Warehouse
1770 Birchwood Avenue
Des Plaines, IL 60018
800.966.0069
P. 847.795.9555
F. 847.795.8770
Eastern Branch Office and Warehouse
80 Red Schoolhouse Road, Unit 110
Chestnut Ridge, NY 10977-7052
Western Branch Office and Warehouse
1000 N. Lake Street
Burbank, CA 91502
P. 818.569.5222
F. 818.569.5226
www.gepco.com
email: [email protected]
This publication contains the most current products and specifications as of its printing.
Items may be added, discontinued, or revised without notice.
Please contact Gepco to verify product specifications and availabilty.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 1 Cover
- 3 Table of Contents
- 4 Introduction
- 6 SMPTE 304M/311M Hybrid Fiber Direct Cable Termination Configuration
- 7 SMPTE 304M/311M Hybrid FiberDistribution Rack Configuration
- 8 SMPTE 304M/311M Hybrid Fiber Cable Assemblies
- 10 Hybrid Fiber Breakout: In-line Cable
- 11 Hybrid Fiber Breakout: Internal Distribution
- 12 Hybrid Fiber Distribution Racks
- 13 Hybrid Fiber Distribution Racks (Drawings)
- 14 Hybrid Fiber Breakout Boxes
- 15 Hybrid Fiber Breakout Boxes (Drawings)
- 16 Hybrid Fiber Rack Accessories & Parts
- 17 Cleaning Tools & Instructions
- 18 Hybrid Fiber Blank Panels
- 19 Modular Isolation Panel System
- 20 Feedthrough Panels & Chassis
- 21 Custom Panels
- 22 Lemo Hybrid Fiber SMPTE 304M Connectors
- 23 Canare Hybrid Fiber SMPTE 304M Connectors
- 24 SMPTE 304M Dust Caps, Boots & Installation Tools
- 25 Panel Mount Fiber Connectors
- 26 TAC-4 & TAC-12 Cable Assemblies
- 27 OpticalCon® Fiber Optic Cable Assemblies
- 28 ST/SC/LC Tactical Snakes
- 29 ST/SC/LC Permanent Install Snakes
- 30 ST/SC/LC Simplex Cables
- 31 ST/SC/LC Duplex Cables
- 32 9.2mm Hybrid Fiber Optic: Extra Flexible
- 33 9.2mm Hybrid Fiber Optic: Permanent Install
- 34 12mm Heavy-duty Hybrid Fiber Optic
- 35 16mm Heavy-duty Hybrid Fiber Optic
- 36 HD Camera Electrical Cable
- 37 Three-channel Fiber Cable
- 38 Single-mode Optical Fiber: Permanent Installation
- 39 Multi-mode Optical Fiber: Permanent Installation
- 40 Single-mode Optical Fiber: Tactical
- 41 Multi-mode Optical Fiber: Tactical
- 42 PART NUMBER INDEX