operation
CONTENTS
Precautions................................................................................................................................................. 1
Take Precaution......................................................................................................................................1
Installation ...................................................................................................................................................2-3
Installation Procedures .......................................................................................................................... 2
Installation Opening................................................................................................................................ 2
Wiring Connections................................................................................................................................ 3
Remove of the Main Unit ........................................................................................................................3
Control Panel Button Locations .................................................................................................................. 4
Operation ................................................................................................................................................... 4-5
Power On/Off .......................................................................................................................................... 4
Adjust Volume (VOL) ............................................................................................................................. 4
Adjust Menu Options (SEL) ....................................................................................................................... 4
Switch Between US and EU Frequency ................................................................................................. 4
Manual Tuning (|<< / >>|) ...................................................................................................................... 4
Auto Seek Tuning (|<< / >>|) ...................................................................................................................4
Next/Previous Track ............................................................................................................................... 4
Fast Forward/Backward ........................................................................................................................ 4
Change the Source (SRC) .................................................................................................................... 5
Setting Time (CLK) ................................................................................................................................ 5
Change Bands (BAND) .......................................................................................................................... 5
Automatic Store station/ Preset station scan (AMS) ............................................................................. 5
Select the track or file for playback in MP3 format ................................................................................ 5
Store/Recall Preset Stations (1 - 6).........................................................................................................5
Play/Pause, Intro, Repeat, Random, Tracks playback ........................................................................... 5
Track/Folder Navigation ........................................................................................................................ 5
Mute On/Off .......................................................................................................................................... 5
Loudness On/Off.................................................................................................................................... 6
Hands-free Microphone ........................................................................................................................ 6
Preset EQ (Equalizer) ........................................................................................................................... 6
LCD Display ........................................................................................................................................... 6
USB Connection .................................................................................................................................... 6
Insert SD Card ....................................................................................................................................... 6
AUX In Jack .......................................................................................................................................... 6
Reset System (RESET) ......................................................................................................................... 6
Bluetooth Operation.................................................................................................................................... 7
Pair and Connect ................................................................................................................................... 7
Make a Call ............................................................................................................................................ 7
Redial Last Dialed Number ................................................................................................................... 7
Answer a Call......................................................................................................................................... 7
End a Call .............................................................................................................................................. 7
Switch Audio Between Car and Phone .................................................................................................. 7
Adjust Talk Volume................................................................................................................................. 7
Audio Streaming (A2DP)......................................................................................................................... 7
Troubleshooting.......................................................................................................................................... 8
............................................................................................................................................. 9
ii
PRECAUTIONS
Take Precaution
‡
‡
Some MP3/WMA files may not be playable.
‡
‡
‡
‡
Be sure to lower the volume before switching off the unit or the ignition key.
1
INSTALLATION
Installation Procedures
First complete the electrical connections and then check for correctness.
Installation Opening
This unit can be installed in any dashboard Having an opening as shown below.
2.05 inch
7.20 inch
Insert mounting collar into the dashboard and bend the mounting tabs out with a screwdriver.
Make sure that lock lever
is flush with the mounting collar( not projecting outward).
MOUNTING SLEEVE
2
INSTALLATION(CONT.)
!
- Only use speakers with 4 ohms impedance.
- The maximum current of the auto antenna is 200mA.
Wiring Connections
WIRING
DIAGRAM
15A
15
Radio Antenna
White:Front Left PRE-AMP Output
Red: Front Right PRE-AMP Output
Red: Rear Right PRE-AMP Output
White: Rear Left PRE-AMP Output
CAUTION
+12V DC
NEGATIVE
GROUND
Purple +
Rear Right Speaker
Purple/Black Gray +
Front Right Speaker
Gray/Black -
Green +
Rear Left Speaker
Green/Black White +
Front Left Speaker
ACC + (Red)
GND - (Black)
ANT + (Blue)
Power B + (Yellow)
White/Black -
Removal of the Main Unit
1.
2.
Remove the plastic trim out from the main unit.
Insert a bracket key into the left and right side of the main unit and draw the unit out of
the mounting sleeve.
3
CONTROL PANEL BUTTON LOCATIONS
OPERATION
1 . Turn Unit on/off (PWR)
Press any button to turun on the unit. Press and hold the VOL/PWR/SEL button to turn off the unit.
‡Adjust the volume (VOL)
Rotate the VOL knob to increase or decrease the volume level.
‡Adjust Menu Options (SEL)
Press SEL button repeatedly to cycle through the following adjustable audio functions: BASS, TREBLE,
BALANCE, FADER, EQ OFF, CLASS/ROCK/POP/ FLAT, LOUD ON/OFF, DX/LOC, STEREO/MONO,
CLOCK 12/24, AREA US/EU.
- BASS: -7,-6, ~,-1, 0,+1,~, +6, +7
- TREBLE: -7, -6, ~, -1, 0,+1,~, +6,+7
- BALANCE: L7, L6,~, L1, 0, R1,~,R6,R7
- FADER: R7,R6,~, R1,0,F1,~,F6,F7
- EQ(Equalizer) Setting: OFF, CLASS, ROCK, POP, FLAT
- Loudness: LOUD ON/OFF
- DX/LOCAL: Enables or disables the local broadcast mode (LOCAL).
- Stereo/Mono: Switches between MONO and STEREO reception mode for radio frequencies.
- CLOCK 12/24: Select between 12 hours and 24 hours display.
Note: If 12 hour display is selected , AM= Morning; PM= Afternoon
- AREA US/EU: This car radio is equipped the USA / Europe frequency.
Rotate the volume knob to switch between USA and Europe frequency.
The system will change the frequency setting in about 3 seconds.
‡5RWDWHWKH92/NQREto adjust the selected item.
2. 3. Manual Tuning / Auto Seek
In the radio mode:
Press and hold the
or
button to enter the manual tuning mode. In manual tuning mode, briefly
press the
or
button to search the next or previous frequency step by step.
Press the
or
button, the automatic search will start, it will search upward or downward for the
strong signal radio station within the cuttent band. The auto searching will stop until find a station.
‡Next/Previous Track; Faste Forward/Backward
In the USB or SD card mode:
Briefly press the
or
button to play the the next or previou track.
Press and hold the
or
button to fast forward or fast backward.
4
OPERATION
4. Change the Source (SRC)
Press this button to select the different modes: Radio, BT(Bluetooth), USB(with USB deviceinserted),
SD(with SD card inserted) and AUX-IN(auxiliary input) modes.
5. Setting Time
Press the CLK button to display time. Press and hold the CLK button again, the hours digits start
flashing on the display. Set hours using the
/
button.
Press the CLK button again. The minute digits start flashing.
Set minutes using the
/
button.
Press the CLK button to confirm your settings.
6. Change Bands
In radio mode, shortly press the BAND button to switch between the FM1(F1), FM2(F2), FM3(F3) and
AM1(A1), AM2(A2) bands.
7. Automatic Store station/ Preset station scan (AMS)
Press and hold the AMS button for more than 2 seconds to select six strong stations and store them in the
current band.The radio will automatically scan the current frequency and enter the six strongest stations into
the preset memory positions for that band.
Briefly press the AMS button to recall each preset station that saved in the memories in each band.
‡Select the track or file for playback in MP3 format
a) Press the AMS button to enter track search mode. The “TRK0000” will appear on the display.
E5RWDWHWKHYROXPHNQREWRVHOHFWWKH³¿UVWQXPEHU´ 7KHQSUHVVWKHEXWWRQWRPRYHWKH³¿UVWQXPEHU´
to the left and enter the next number.
c) When the desired track number appears, confirm your selection by pressing SEL button (VOL knob).
8~13 To Store / Recall Preset Stations
The radio can be stored 6 preset stations for each band (FM1, FM2, FM3,AM1 and AM2) for a total of 30
preset stations.
- To memorize a station:
Press and hold one of the six preset buttons (1-6) to save a radio station.
- To recall a preset station:
Briefly press the respective station button (1-6) to recall the corresponding preset station.
‡Play / Pause
Press the
button to interrupt the playback of a music title (pause function). Press this button again to
continue the playback.
‡Introduction Scan
Press the INT button to play the first 10 seconds of all track. Press again to stop the introduction scan, and
play the current track.
‡Repeating the track
Press the RPT button to toggle between RPT ALL (Play all track), RPT FLR (Continuously repeats all tracks
in current folder) and RPT ONE (Continuously repeats current track).
‡Playing all tracks in random
Press the RDM button. A random playback of all tracks will start. Press the button again to set the normal
playback.
‡Track/Folder Navigation
- Press the -10/+10 buttons to jump 10 tracks backward or forward. It is required that over 10 tracks be
available on the storage medium.
- Press and hold the -10/+10 button to select the previous or the next folder. (If there are folders on the
storage medium.)
14. Mute on/off
In power on mode, briefly press the MUTE button to toggle mute on or off. The muted state will be also
released when the volume knob is used.
5
OPERATION
15. Loudness on/off
Press the LOUD button to turn on the loudness to reinforce the output of bass frequencies, press again
to turn it off.
16. Hands-free Microphone
To receive your voice when you calling by using this bluetooth handsfree system.
17. Preset EQ (Equalizer)
Press the EQ button to toggle between EQ OFF, CLASS, ROCK, POP, FLAT.
18. LCD Display
19. USB Port / Micor SD Card Slot
Insert an SD card with the label to the right into the SD card slot, until it “clicks” into place.
The data will be automatically played.
‡USB Connection
If you would like to playback data contained on a USB stick, please insert the stick into the USB port.
The data will be played automatically.
The USB port of this car radio is also designed for charging for iPhone / andriod mobile phone.
The charging current consumption is 1 ampere.
20. AUX Socket
Using this socket, it is possible to hear the sound of other playback devices such as MP3
players, CD players etc. through the car loudspeaker.
1. Please connect the external device with a 3.5 mm stereo jack plug to the AUX socket.
2. Press the SRC button repeatedly until “AUX IN” appears in the display.
3. You hear the playback from the external device via the loudspeakers. You can adjust the
volume of the external device to a comfortable level with the volume control of this device.
21. Reset
Push the RESET button with a thin object with a pointed end to reset all parameters to factory
default settings.This function may be used when the LCD does not display normally or sound
is distorted, or when any of controls are disabled.
6
BLUETOOTH OPERATION
Pair and Connect
Prior to using the Bluetooth device as a handsfree system for a Bluetooth-enabled mobile
phone for the
time, you must pair and connect the two devices as follows:
in the LCD indicating
1. In any mode, prior to pairing and connecting, the BT logo
that no device is connected. To begin pairing, enable BT mode on your mobile phone.
2. When the phone
the car audio system, the PLANET P370MB name will be displayed.
3. Choose the PLANET P370MB from the device list to pair and connect with the car audio
system. Upon
the BT logo will stop
4. When pairing is complete, the mobile phone audio will automatically transfer to the car
audio system whenever a call is made or received, or when the mobile phone plays
music.
Make a Call
‡To make a call, dial the call directly from the paired mobile phone.
Redial Last Dialed Number
Press and hold the
button on the control panel to redial the last dialed phone number.
Answer a Call
‡ When the mobile phone is called, the incoming telephone number displays in the LCD.
‡ To receive the call, press the
button on the control panel or remote control.
Reject or End a Call
To reject the call or end an active call, press the
button.
Switch Audio Between Car and Phone
During a call, press the VOL knob/button to switch the audio source from the car audio
system back to your mobile phone.
Adjust Talk Volume
‡ During a call, use VOL knob or VOL + and VOL - buttons to adjust the volume level.
‡ Use the MUTE button to mute sound.
Audio Streaming (A2DP)
1. Press the SRC button to enter BT mode and display pause in the LCD display.
2. When a mobile device is paired, music played through that device will automatically be
heard through the car audio system.
on the mobile phone.
3. Press the
or
button to play the next or previous
4. Press the
button to pause or resume music playback.
7
TROUBLESHOOTING
If you suspect something is wrong, immediately switch power off. Do not use the unit in
abnormal condition, for example without sound, or with smoke or foul smell, can cause fire or
electric shock.
Immediately stop using it and call the store where you purchased it. Never try to repair the
unit by yourself because it is dangerous to do so.
General
1) Car's engine switch is not on.
Turn you car's key to ACC or ON.
2) Cable is not correctly connected.
Check the connection.
3) Fuse is burnt.
Replace fuse.
4) Volume is in mute or minimum.
Check volume or mute on/off, adjust volume to a desired level.
5) Sound skips.
The installation angle is more than 30°. Adjust the installation angle less than 30°.
6) The operation keys do not work.
The built-in micro- computer is not operating properly due to noise. Press the RESET button
to restore the program to zero.
Radio
1) Much noise in broadcasts.
Station or signal is too weak. Select other stations of stronger signal level.
2) The antenna cable is not connected.
Insert the antenna cable firmly into the antenna socket of this car radio.
3) Preset station is reset.
Battery cable is not correctly connected. Connect the battery cable to the terminal that is
always live.
USB/SD
USB or SD card is connecting but no sound
a) USB or SD card connection is not good. Take it out and insert again.
b) USB or SD card is damaged or no music file inside. Change to another USB or SD card, or
record music inside it.
8
SPECIFICATIONS
General
Power supply Requirement :
Maximum power output :
DC 12V
50W X 4CH
Speaker impedance :
Unit Dimensions(WxHxD) :
4 - 8 Ohm
7.0 X 2.0 X 3.8 inch
Weight :
Fuse :
1.54 Lb (0.7 kg)
15 A
RADIO
FM
Frequency Range USA / EUROPE:
Channel step:
87.5 MHz - 107.9 MHz / 87.5 MHz - 108.0MHz
200 KHz / 50 KHz
AM
Frequency Range USA / EUROPE:
Channel step:
530 KHz - 1710 KHz / 522-1620 KHz
10 KHz / 9 KHz
USB/Card
Usable Audio Formats
USB Port Type
USB Charging
Card Type
Pre-amp Output
Frequency Response
S/N Ratio
MP3/WMA
2.0
5V/1A
MicroSD™
Front and Rear
20 Hz - 20 KHz
60dB
BT
BT Profile supports
Range of frequency
A2DP , AVRCP & HFP
2.4GHz spectrum
9
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising