Advertisement
Advertisement
G03302
INSTRUCTIONS FOR USE AND INSTALLATION
GRIDDLE PLATES
PSR 400 G / PSR 600 G / PSR 900 G
Made in France
July 2013
GAS GRIDDLE PLATES
PSR 400 G / PSR 600 G / PSR 900 G
Congratulations for the acquisition of this upmarket appliance made in France. You chose an appliance which alloys the best technical qualities with a big user-friendliness.
We wish you the biggest contentment
1. SECURITY INSTRUCTIONS
Please respect these instructions scrupulously to avoid any risk of fire, scald or other wounds and damage. During the use of this appliance, fundamental circumspection of security must always be noticed, such as:
- Take into account the instructions to be systematically kept with the appliance.
- Install the appliance always in instructions respect. A 10 cm distance minimum with the partition or the wall is necessary.
- Protect the appliance from direct light of the sun, frost and humidity.
- Never leave the appliance within the reach of children or disabled persons without surveillance.
- Never move the appliance when it is working or when the surfaces of cooking are still hot.
- Do not touch the hot surfaces of the appliance. The temperature of the hot surfaces can be very important when the appliance is working. Always use control knobs.
- Do not use the appliance for other functions than determined use.
- Do not leave the pipe or hose (purchased separately from a specialised shop) in the contact of hot surfaces.
- The appliance should not be used close to combustible materials.
- During use, look after not to obstruct hearings of aeration of the appliance
- Entrust compensations only to a skilled person.
- Use only spare parts of origin.
- At the end of cooking, before cleaning the appliance, do not forget to disconnect the gas inlet.
2. CONTENTS OF CARDBOARD PACKAGING
Device: a griddle plate
Accessories: - A drip tray
- A set of natural gas injectors
- The present note
See exploded views for PSR 400 G / PSR 600 G / PSR 900 G at the end of the document
2
15
Nomenclature PSR 900 G
Spare parts PSR 900 G
14
1 2 3 5
4
1
2
3
Power control knob 4
Piezo power-on knob
Opening for lighting with a matchstick
Outlet for juices and fat
3. CONFORMITY OF USE
Use the device only to cook meat, bacon, fish, hamburgers, sausages, onions, shellfishes, vegetables..., and also for fried eggs and omelettes…
4. WAY OF FUNCTIONING
This griddle plate is fitted with steel plate (10 mm deep) for a perfect cooking. The plate’s smooth surface provides direct heat transfer to the food being cooked, without heat loss at the centre as in the periphery thanks to star-shaped burners (1 for PSR
400 G, 2 for PSR 600 G and 3 for PSR 900 G ) that cover the entire cooking surface.
To turn on and preheat the plate, just switch on the burner by pressing on the power control knob (n°1 on picture) opposite the star position for a few seconds and on the piezo (n°2 on picture) several times if required.
If the piezo (n°2 on picture) no longer generates the required series of sparks, you can use a gas lighter or a long matchstick by holding it near the oblong hole (n°3 on picture) and keeping the knob pressed (n°1 on picture) facing the star position as indicated above.
3
While cooking, the temperature can be regulated using the control knob (n°1 on picture) from high flame to low flame in order to avoid over-cooking.
A safety thermocouple cuts the gas supply if the burner is extinguished. The low flame of the appliance is pre-adjusted in the factory, it must not be changed. This extinction can mainly occur when there is a lot of wind. In this particular case, just repeat the switching-on procedures described on previous page.
Your appliance is equipped with a removable collector tray (n° 5 on picture) to drain juice and fats. It must be emptied regularly. It is recommended to pour a little water in the tray when you start cooking to facilitate maintenance and to avoid the solidification and accumulation of fats at the bottom of the tray.
Never use the appliance without the drip tray (n°5 on picture).
5. FUNCTIONING / HANDLING a) Installation/Assembly:
- Unpack carefully the machine from its packaging.
- Place the griddle plate on a plane and heatproof surface.
- Never place the device near a wall or near a partition makes of combustible materials even if it is very well isolated.
- A distance of minimum 10 cm with the partition or the wall is necessary.
- Remove the protective film around the machine without forgetting the one on the drip tray (n°5 on picture).
b) First starting:
During the first use, warm your machine up outside during about 30 min to evacuate residual smokes of manufacturing oil from the metallic parts. This may emit a slight smell for a few moments.
First cleaning
Clean the device before the first use. (See 6 Cleaning)
Gas connection
The appliances run on the following gases: Butane G30, Propane G31, Natural gas
G20/G25. The appliances are originally delivered with Butane/Propane injectors corresponding to the category II2E+3+. The connection is made thanks to a thread 1/2.
4
13
Nomenclature PSR 600 G
Spare parts PSR 600 G
12
The heat release rate of the appliance is PSR 400 G
PSR 600 G
3.2 kW
6.4 kW
PSR 900 G 9.6 kW
For a use in natural gas, change the injectors. They are delivered in a small plastic bag placed in the package.
Connect the appliance to the gas supply pipe, interposing a stop valve which enables the appliance to be insulated from the rest of the installation.
Check the supply pressure using a manometer when all the burners are lit. It must be equal to the indications on the rating plate.
The fresh air flow required for combustion air supply is:
- PSR 400 G 6.4 m3/h
- PSR 600 G 12.8 m3/h
- PSR 900 G 19.2 m3/h
General conditions of installation
The installation and maintenance of the appliance must be carried out in compliance with the statutory texts and good practices in force, mainly:
General specifications
For all appliances:
Article GZ Installation with combustible gases and liquefied hydrocarbons.
Then, according to use:
Article CH Heating, ventilation, refrigeration
Air conditioning and domestic hot water steam generation.
Article GC Installation of appliances to be used for catering
Specific provisions for each type of establishment to which the public is admitted
(hospitals, shops, etc…)
Important: Never change the diameter of the injectors.
5
Gas category table, according to the country of destination of the appliance.
Country of destination Category
France/Luxembourg II2E+3+
II2E+3B/P
Gas Pressures Diameter of
injector
G20/G25
G30/G31
G20/G25
G30/G31
20/25
28-30/37
20/25
50
135
90
135
85
Germany II2E3B/P
Austria
Belgium
Sweden, Denmark,
Finland
Spain
Netherlands
II2H3B/P
I3+
I2E
II2H3B/P
II2H3+
II2H3P
II2L3B/P
II2L3P
I3B/P Norway
Iceland/Greece/United
Kingdom/Italy/Portugal
II2H3+
Poland II2E3P
G20
G25
G30/G31
20
20
50
G25
G30/G31
G25
G31
25
30
25
50
135
150
85
G20 20
G30/G31
G30/G31
G20/G25
G20
G30/G31
50
28-30/37
20/25
20
30
135
85
90
135
135
90
G30/G31
G20
G31
20
50
135
90
135
85
140
90
140
85
G30/G31 30 90
G20
G30/G31
20
28-30/37
G20/25
G31
20
37
135
90
135
90
Injector N°
Injector n°1
Injector n°2
Injector n°3
Injector n°4
Injector n°5
Injector n°6
Gas Pressures
G30 / G31 Butane/Propane 28-30/37
G30 / G31
G20 / G25
Butane/Propane
Natural Gas
50
20-25
G25
G25
G31
Natural Gas
Natural gas
Propane
25
20
50
Diameter
90/100
85/100
135/100
140/100
150/100
85/100
6
11
Nomenclature PSR 400 G
Spare parts PSR 400 G
10
Air adjustment
Injectors were conceived to avoid any air adjustments and that whatever the gas you use. c) Use of device :
Elements of command and display
Command/Display Function
Piezo
(n°2 on picture)
Switches on the appliance (simultaneously with the set knob)
Set knob
(n°1 on picture)
Switches on the appliance (knob pressed simultaneously with piezo)
Controls power (low flame = low power, high flame = high power)
Opening
(n° 3 on picture)
Can replace the piezo and thus helps to switch on the appliance using a large matchstick or a gas lighter (simultaneously with the set knob kept pressed for a few seconds)
Never use the appliance without its juice collector tray (n°5 on picture)
Switching-on
Press the power control knob (n°1 on picture) for a few seconds.
Press on the piezo (n°2 on picture) to light the burner.
Keep the control knob (n°1 on picture) pressed for some more seconds.
The burner then remains lit and it is now possible to increase the power by turning the power control knob (n°1 on picture).
Grease the plate before each cooking.
Temperature setting
Once the burner is lit; set the appliance to the desired power by turning the control knob (n°1 on picture).
It is not necessary to leave the device switched on at full power. It is necessary to adapt the temperature to products to be cooked to limit the gas consumption.
Stopping the appliance
Set each control knob (n°1 on picture) to 0: the appliance is completely switchedoff.
Close the butane or propane cartridge
Let the device cool.
Clean the appliance. (See 6. Cleaning)
7
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and confide any technical operation to qualified person.
When you contact the after-sales service of your distributor or your store, give him the complete reference of your device (commercial name, type and serial number).
This information appears on the visible descriptive plate behind the device.
6. CLEANING AND MAINTENANCE
Cut the gas supply.
The plate is still hot:
- Drain most of the fats and cooking juice with the wooden spatula towards the outlet (n°4 on picture) in front of the plate.
- Let the plate cool down and clean it with warm soapy water and a slightly abrasive pad. Collect the cooking residues in the drip tray (n°5 on picture).
- Then use some white vinegar to neutralize the cooking smells.
- Finally, wipe the plate before putting it away or using it again.
Do not put ice cubes or other on the plate that is still hot (deglazing), which may lead to a violent thermal shock, permanent damage and coloration of the plate.
The plate is cold:
- Clean the plate with a wet sponge and some dishwashing liquid.
- Wipe the plate with a soft and clean cloth.
- Remove and empty the tray (n°5 on picture) filled with fats and cooking juice.
- Clean the tray (n°5 on picture) with a wet sponge and some dishwashing liquid
(can also be washed in a machine) and wipe.
- After the tray (n°5 on picture) dries, put it back in the appliance.
- Clean the outer case of the appliance without using any abrasive product.
- Never clean the appliance under a water jet, the infiltrations may cause irreparable damage to the appliance.
Attention to the capacity of the drip tray (n°5 on picture): consider emptying it regularly, any overflowing inside the appliance may cause irreparable damage.
During a prolonged non-use, we recommend you strongly to keep the device shielded from the humidity .
8
7. TECHNICAL SPECIFICATIONS
Models PSR 400 G PSR 600 G PSR 900 G
Outside dimensions 400x475x230 mm 600x475x230 mm 900x475x230mm
Cooking surface
Weight
Power
400x400 mm
17 Kg
3200 W
600x400 mm
27 kg
6400 W
900x400 mm
37 Kg
9600 W
No of burners 1 2 3
8. GUARANTEE
Conditions of guarantee
The guarantee applicable to any device is the commercial guarantee of the distributor or the retailer. Please contact the store where you bought your device to know the precise conditions.
The guarantee grants no right for damages.
The dispositions which follow are not exclusive of the profit of the legal guarantee planned by articles 1641 and following ones of the Civil code relative to the defects and the latent defects.
Exclusion clauses of the guarantee
Bad installation and bad maintenance, in particular if they do not respect current regulations or instructions appearing in this user guide. Any violent thermal shock leading to irreparable damage of the plate is not covered by the warranty. (Deglazing = sudden cooling with ice cubes and cold water when the plate is still hot after cooking).
Cannot benefit from the guarantee the repairs required as a result of false operations, of inappropriate use, of carelessness or of excess loads of the device, as well as those resulting from defective installations.
The damage due to shocks, bad weather is not flatware by the guarantee. The material travels at the risks of the user; in case of delivery by carrier, the consignee has to have reservations towards the carrier before any delivery of the device.
The guarantee comes to an end in case of intervention, of repair, of modification by no qualified persons, or of use in inappropriate purposes.
9

Public link updated
The public link to your chat has been updated.
Advertisement