Catalog IK PI 2012, English
8
© Siemens AG 2011
Industrial Wireless
Communication
8/2
Introduction
Ch. 9
9/12
9/17
9/122
9/128
Industrial Wireless Telecontrol
CP 1242-7
GSM/GPRS-Modem MD720-3
EGPRS-Router MD741-1
UMTS-Router SCALANCE M87x
8/3
8/3
8/6
8/10
Industrial Wireless LAN (IWLAN)
Introduction
Application examples
Overview of network components
8/15
IWLAN – Access Points
IEEE 802.11n
Overview
SCALANCE W788 RJ45
for use in control cabinet
SCALANCE W788 M12
for the indoor area
SCALANCE W786 RJ45
for the outdoor area
8/15
8/18
8/24
8/31
8/39
8/39
8/43
8/47
8/50
8/53
8/58
8/58
8/63
8/70
8/79
8/98
8/98
IWLAN – Controller and
Controller Access Points
IEEE 802.11n
Overview
Industrial Wireless LAN Controller
SCALANCE WLC711
Controller Access Points
SCALANCE W788C RJ45
for control cabinet
Controller Access Points
SCALANCE W788C M12
for the indoor area
Controller Access Points
SCALANCE W786C RJ45
for the outdoor area
IWLAN – Access Points
IEEE 802.11a/b/g
Overview
SCALANCE W784
for use in the control cabinet
SCALANCE W788
for the indoor area
SCALANCE W786
for the outdoor area
8/103
8/103
8/106
8/110
8/115
8/115
8/120
8/128
IWLAN – Client Modules
IEEE 802.11n
Overview
SCALANCE W748 RJ45
for use in the control cabinet
SCALANCE W748 M12
for use in the indoor area
IWLAN – Client Modules
IEEE 802.11a/b/g
Overview
SCALANCE W740
for use in the control cabinet
SCALANCE W740
for use in the indoor area
8/136
8/136
8/154
8/161
8/165
8/167
IWLAN – Accessories
IWLAN antennas
IWLAN RCoax cables
IWLAN cabling technology
Power supply PS791-1PRO
Power Supply
PS791-2DC and PS791-2AC
8/169
8/169
8/183
IWLAN – Wireless Devices
SIMATIC Mobile Panel 277(F) IWLAN
IM 154-6 PN IWLAN
8/185
8/185
IWLAN – Network transition
IWLAN/PB Link PN IO
8/190
8/190
Engineering/
network management/
diagnostics
SINEMA E
8/194
8/194
8/195
8/197
8/198
8/199
WirelessHART
Introduction
SITRANS P280
SITRANS TF280
SITRANS AW200
IE/WSN-PA LINK
IWLAN – Controller Access Points
IEEE 802.11a/b/g
Controller Access Points
SCALANCE W786
for the outdoor area
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
Introduction
■ Overview
Wireless communications offer multiple new opportunities to the
industry for the development of highly flexible and efficient
automation solutions. Whether Industrial Wireless Telecontrol,
IWLAN, or WirelessHART, the Siemens product line for Industrial
Wireless Communications is reliable, robust and secure. The
components are used under the toughest indoors and outdoors
conditions. Their multiple applications in crane systems,
automatic guided vehicle systems, or in remote operation /
remote maintenance systems are a testimonial to their exceptional reliability.
Industrial Wireless
Telecontrol
WirelessHART
Wireless data transmission via Industrial Wireless TeleControl,
Industrial Wireless LAN, and WirelessHART
8
8/2
Siemens IK PI · 2012
G_IK10_XX_30229
Industrial Wireless
LAN
Further information can be found under the product entries for
GSM, GPRS and UMTS modems and routers in the section on
Industrial Remote Communication.
Further information on WirelessHART can be found under the
product entries for WirelessHART as well as in Catalog FI 01 and
at www.siemens.com/wirelesshart
© Siemens AG 2011
Industrial Wireless Communication
Industrial Wireless LAN (IWLAN)
Introduction
■ Overview
SCALANCE W – wireless communication with Industrial
Wireless LAN
The SCALANCE W products offer the combination of reliability,
ruggedness and security in one product:
• For implementation at industrial and automation customer
sites
• For outdoor environments with demanding climatic
requirements
• For low-cost integration in the control cabinet or in devices
Network solution with IWLAN
With mobile data terminals, for example, a continuous information flow from the management level down to the production
level is possible.
The SINEMA E software is available for simplified planning and
configuration of an IWLAN network with the help of simulation
functions. It visualizes clearly and details wireless and device
properties, thus reducing the configuring and startup overhead
and helping to avoid configuring errors.
The Industrial Wireless LAN (IWLAN) technology provides an
extension to the IEEE 802.11 standard that is particularly suited
to demanding industrial applications with real-time and redundancy requirements. This provides customers with a unique
wireless network, both for process-critical data and for uncritical
communication. SCALANCE W products distinguish themselves
by the reliability of their radio channel and the rugged type of
construction with high requirements with respect to mechanical
durability for which SIMATIC is known. To protect against
unauthorized access, the products provide modern standard
mechanisms for user identification (authentication) and
encryption of data, and can at the same time be easily
integrated into existing security concepts.
The IWLAN/PB Link PN IO is available for wireless-based
connection of PROFIBUS devices.
Radio infrastructure
Power and data are transferred over one cable with Power-overEthernet, thus saving investment and maintenance costs.
Instead of copper cables and fiber-optic cables, wireless transmission techniques use radio waves. The propagation characteristics of the electromagnetic waves can differ considerably
and depend on the spatial environment with the installed
wireless infrastructure.
SCALANCE W modules use techniques such as antenna
switchover (antenna diversity), high-quality receivers and faulttolerant modulation procedures to enhance reception and to
prevent interruption of radio communication. Extensions to the
IEEE 802.11 standard also permit reliable, wireless transmission
from PROFINET, form the basis for wireless safety applications
and the transmission of video data with extremely short reply
and update data.
This means that information can be provided quickly, reliably
and easily at the right place and at the right time wirelessly.
Ruggedness and industrial suitability
The SCALANCE W products can be exposed to fluctuations in
the extended temperature range, or continuous contact with
dust and water. Rugged housing and design protection against
shock and vibration enable use in harsh industrial environments.
The accessories such as antennas, power supplies and cabling
are also part of this concept and suitable for use in industry.
The swap medium C-PLUG (Configuration Plug) saves configuring data, making device replacement possible in a short time
and without specially trained personnel. This minimizes standstill times and saves training costs.
Reliability of data communication
The international standard IEEE 802.11n makes wireless
communication via IWLAN even more robust. Maximum benefit
derives from using multiple path propagation (Multiple Input,
Multiple Output (MIMO)). This allows the devices to use several
antennas in parallel. A higher data transfer rate is thus achieved
and fault susceptibility in environments with a high number of
reflections is reduced.
SCALANCE W products with IWLAN in accordance with
IEEE 802.11n support up to three "streams" in the send and
receive directions.
8
Multipath propagation according to IEEE 802.11a/b/g
SCALANCE
W788-1PRO
SCALANCE
W746-1PRO
SCALANCE
W788-1 M12
SCALANCE
W748-1 M12
G_IK10_XX_30268
Multipath propagation according to IEEE 802.11n (MIMO)
Multiple path propagation (MIMO) with SCALANCE W788-1PRO and SCALANCE W788-1 M12
Siemens IK PI · 2012
8/3
© Siemens AG 2011
Industrial Wireless Communication
Industrial Wireless LAN (IWLAN)
Introduction
■ Overview (continued)
Redundant network concepts can also be implemented
wirelessly. Wireless channels are designed redundantly for this
purpose, with a changeover time of a few milliseconds, so that
the application is not influenced by packet repetitions or interference in the radio channel.
1RGDWDUDWHUHVHUYDWLRQ
IEEE 802.11
Time
Client 1
Client 2
Client 3
Client 4
Client 5
This means that access by
nodes with critical data cannot
be predicted.
*B,.B;;B
Client 6
All nodes access the radio channel
without prioritization.
In standard WLAN, all stations access the radio channel in an
uncoordinated manner. This means that access by stations with
critical data cannot be predicted.
The iPCF function (support from device types with i features)
permits cyclic data traffic in real time for several wirelessly linked
PROFINET IO devices. In addition, this enables mobile stations
to be transferred quickly from one radio field to another
(roaming) so that PROFINET IO communication is not interrupted.
&\FOLFSROOLQJRIDOOQRGHVZLWKLQUDGLRFRYHUDJH
IEEE 802.11
Time
Client 1
Client 2
Client 3
Client 4
Client 5
Client 6
This means that access by all
nodes can be predicted.
All nodes may predictably access the
radio channel
However, WLAN also provides a transmission mechanism based
on standard WLAN in accordance with IEEE 802.11, which
makes a defined data rate available to all stations. This means
that access by all stations can be predicted.
8/4
Siemens IK PI · 2012
*B,.B;;B
8
© Siemens AG 2011
Industrial Wireless Communication
Industrial Wireless LAN (IWLAN)
Introduction
■ Overview (continued)
■ Benefits
Increased transmission rate
WLAN systems in accordance with IEEE 802.11a/b/g/h use a
single channel for sending and receiving data. This achieves a
maximum gross transmission rate of 54 Mbit/s.
Two channels are used simultaneously with the help of channel
bonding. Gross transmission rates of up to 450 Mbit/s can be
achieved in conjunction with the MIMO technology in accordance with IEEE 802.11n.
Communication according to IEEE 802.11a/b/g/h standard
SCALANCE
W788-1PRO
SCALANCE
W746-1PRO
2x 20 MHz channels
max. data rate: 54 Mbit/s
SCALANCE
W788-1 M12
SCALANCE
W748-1 M12
1x 40 MHz channel
G_IK10_XX_30289
Communication according to IEEE 802.11n standard
max. data rate: 450 Mbit/s
• High level of investment protection, as all products comply
with the universally recognized IEEE 802.11 standard and are
suitable for 2.4 GHz and 5 GHz
• Wear-free – saves maintenance and repair costs for
connectors, trailing cables, sliding contacts or winding
devices
• Reliable wireless connection, e.g. due to redundant
connection, automatic roaming if there is a break in the cable
connection from the access point (forced roaming), cyclic
monitoring of the wireless link (link check), or monitoring for IP
connections (IP Alive)
• Predictable data traffic (deterministic) and defined response
times on the radio link
• Wireless transmission of standard and failsafe signals by
means of PROFINET and PROFIsafe
• More economical installation in hazardous areas of Zone 2
• Rapid commissioning thanks to reduced overhead for
installing the communication network when using the
SINEMA E engineering tool. This provides support for
planning, simulating and measuring an IWLAN radio link
on-site (site survey)
• Integrated wireless network for data, voice and video beyond
corporate divisions thanks to interfacing with the
SCALANCE WLC IWLAN controller (support from
SCALANCE W78xC device types)
Increased transmission rate on IWLAN in accordance with IEEE 802.11n
with the help of channel bonding
8
Siemens IK PI · 2012
8/5
© Siemens AG 2011
Industrial Wireless Communication
Industrial Wireless LAN (IWLAN)
Application examples
■ Overview
6ZLWK
352),1(7&38
RU&3
1RWHERRNZLWK
SODQQLQJVRIWZDUH
6,1(0$(
$FFHVV3RLQW
6&$/$1&(
:352
352),1(7
,QGXVWULDO(WKHUQHW
$FFHVV3RLQW
6&$/$1&(
:55
$FFHVV3RLQW
6&$/$1&(:
,:/$15&RD[&DEOH
0RELOH
3DQHOV
,:/$1
3%/LQN
31,2
352),%86
&OLHQWPRGXOH
6&$/$1&(:
6ZLWK
&3/HDQ
ZLWKLQWHJUDWHG
SRUWVZLWFK
(76
6,1$0,&6
(7SUR
Wireless integration of PROFIBUS segments and PROFINET stations into an existing Industrial Ethernet network
8
An existing Ethernet network can be expanded by a wireless
network without increased overhead.
With this, even an existing PROFIBUS line can be connected via
the IWLAN/PB Link PN IO to an access point.
The radio connection is established to the mobile stations by
connecting a SCALANCE W access point to the Ethernet
network. The mobile stations are connected wirelessly, e.g. via
the SCALANCE W746-1PRO Client Module, to which the mobile
station is connected with a cable.
Access to the existing controllers or processes is possible
without an excessive additional wiring overhead.
8/6
Siemens IK PI · 2012
*B,.B;;B
(76
© Siemens AG 2011
Industrial Wireless Communication
Industrial Wireless LAN (IWLAN)
Application examples
■ Overview (continued)
Office network
Plant network
Seamless roaming between office- and plant networks
WLAN
telephone
S7-300 with
CP 343-1
SCALANCE
WLC711
IWLAN Controller
Enterasys
AP2610
(IEEE
802.11a/b/g)
PDA
Industrial Ethernet
Network
management
Enterasys
AP3640
(IEEE
802.11a/b/g/n)
SCALANCE
W786-2HPW
(IEEE 802.11a/b/g)
IP telephone
SCALANCE
W788C
(IEEE 802.11a/b/g/n)
Router
Database
SCALANCE
W748-1 RJ45
Laptop
G_IK10_XX_30175
Ethernet
IP telephone
system
Enterasys Wireless Controller
S7-300 with CP 343-1 ERPC
Uninterruptible roaming between the office and automation network by using wireless LAN controllers and industrial wireless LAN controllers
By using the SCALANCE WLC Industrial Wireless LAN Controller
together with controller-based access points, it is possible to
establish a single wireless infrastructure for the entire company.
This achieves a high level of flexibility, as mobile stations (e.g.
laptop, PDA, WLAN telephone) can move anywhere, switching
seamlessly between the office and automation networks
(roaming). This allows wireless access to data from any location
within the company. Thanks to the use of a centralized security
mechanism for each user group (Virtual Network Services VNS),
the data here is protected against unauthorized access and
manipulation.
The SCALANCE W786-2HPW controller-based access points
support the WLAN standards IEEE 802.11a/b/g, and they are
connected via Fast Ethernet to the SCALANCE WLC IWLAN
Controller.
Operation always requires the SCALANCE WLC IWLAN
Controller, which permits the configuration of access points in
groups. This significantly increases the manageability of an
extensive IWLAN infrastructure. Central management with the
IWLAN controller also permits fault recording, monitoring and
documentation of statistics.
The SCALANCE W78xC controller-based access points support
the WLAN standards IEEE 802.11a/b/g and 802.11n, and they
are connected via Gigabit Ethernet to the SCALANCE WLC
IWLAN Controller.
Siemens IK PI · 2012
8/7
8
© Siemens AG 2011
Industrial Wireless Communication
Industrial Wireless LAN (IWLAN)
Application examples
■ Overview (continued)
Wireless solutions with RCoax cable are typically used in the
following applications:
• Crane control
• Overhead monorail conveyors
• Storage and retrieval systems
• Automated guided vehicle systems (AGVS)
S7-300
with CP 343-1,
PROFINET
Industrial Ethernet
An example of an application with a suspended monorail is a
nutrunner controller in a car assembly plant.
Access Point
SCALANCE
W788-1RR
RCoax cable
Segment 1
An RCoax radiating cable is used along the coding rail to
establish wireless data transfer between the monorail and the
central controller. It generates a defined, spherical and reliable
wireless field and is easy to lay.
Antenna
ANT792-4DN
The RCoax Cable is connected as an antenna to a stationary
SCALANCE W788-1RR access point. This means the same
mobile unit can be used for all applications and so a mobile
nutrunner can be used for several cycles resulting in lower
investment costs.
Client Module
SCALANCE
W747-1RR
Maintenance costs and downtimes are reduced by reliable
wireless and therefore wear-resistant data transmission to
mobile communication partners
SCALANCE
X208PRO
Downtimes are reduced because in the event of a fault, devices
can be replaced without a programming device or specialist
personnel by using the swap medium C-PLUG.
Nutrunner
control
Hangers
ET 200pro
System solution for nutrunner controls with RCoax cable and
SCALANCE W747-1RR
8
8/8
Siemens IK PI · 2012
G_IK10_XX_30048
SIMATIC HMI
© Siemens AG 2011
Industrial Wireless Communication
Industrial Wireless LAN (IWLAN)
Application examples
■ Overview (continued)
Internet
Control and
monitoring system
Safety
Controller
Fail-safe communication
via PROFIsafe profile
Controller
Security
IPC427C Bundle
with WinAC
Switch
PROFINET
PROFIsafe
Industrial
Ethernet
Access
Point
IE/PB
Link
PN IO
Distributed l/O
ET 200pro
RCoax Cable
HMI
Proxy
PROFIsafe
SINAMICS Drives
PROFIBUS
SINUMERIK
840D sl und
SINAMICS
S120 Drives
SINAMICS
G120
G_IK10_XX_30118
other field busses
DP/AS-i
F-Link
Distributed I/O
AS-Interface
Fail-safe communication with PROFIsafe – via PROFIBUS, PROFINET and even wirelessly via Industrial Wireless LAN
,:/$1UDGLROLQN
$FFHVV3RLQW
6&$/$1&(
:55
$FFHVV3RLQW
6&$/$1&(
:55
0RELOH3DQHO),:/$1
&38
)
31'3
(IIHFWLYHUDQJH
(IIHFWLYHUDQJH
(IIHFWLYHUDQJH
7UDQVSRQGHU
7UDQVSRQGHU
7UDQVSRQGHU
6&$/$1&(
;
352),1(7
(7SUR
5RERWV
5RERWFHOO
(7SUR
5RERWV
5RERWFHOO
*B,.B;;B
,QGXVWULDO(WKHUQHW
352),VDIH
(7SUR
5RERWV
5RERWFHOO
Programming of robots in the safety-related environment
For a number of years, standard automation has incorporated
safety engineering - on the basis of SIMATIC S7 controllers,
PROFIBUS and PROFIsafe.
This range has been expanded by PROFINET-enabled components, thus providing a complete product range with fail-safe
controllers, fails I/O and a corresponding engineering
environment.
PROFIsafe prevents errors such as address corruption, loss,
delay, etc. when transmitting messages through continuous
numbering of the PROFIsafe data, time monitoring, and authenticity monitoring using passwords and optimized CRC backup.
Fail-safe communication is thus also supported via industrial
wireless LAN.
Siemens IK PI · 2012
8/9
8
© Siemens AG 2011
Industrial Wireless Communication
Industrial Wireless LAN (IWLAN)
Overview of network components
■ Overview
Industrial Wireless LAN according to IEEE 802.11
802.11a/b/g
For cabinets
W788 M12
W748 M12
W788 RJ45
W748 RJ45
W784-1
W744-1 / W746-1
SCALANCE W access points and client modules
8
8/10
Siemens IK PI · 2012
Client Modules
W786-2RR
802.11a/b/g
For interior
environments
Access Points
W786 RJ45 / W786 SFP
802.11a/b/g + 802.11n
For outside
environments
Client Modules
W788-1RR / W788-2RR
W747-1RR
W784-1RR
W747-1
IWLAN / PB Link PN IO
G_IK10_XX_30279
Access Points
Industrial Wireless LAN incl. iFeatures
© Siemens AG 2011
Industrial Wireless Communication
Industrial Wireless LAN (IWLAN)
Overview of network components
STP/ RSTP (IEEE 802.1d/w)
WDS (Wireless Distribution System)
IWLAN client operation possible
VLANs (Multi-SSID)
PROFINET IO Diagnostics
SNMP
Syslog
8
●
●
●
SCALANCE
W788-2 M12
● 3x3 2
6
M12
●
● -20 +60 65
●
●
●
●
●
●
●
● 16 ●
●
●
SCALANCE
W788-1 RJ45
● 3x3 1
3
RJ45
●
● -20 +60 30
●
●
●
●
●
●
●
●
●
●
●
SCALANCE
W788-2 RJ45
● 3x3 2
6
RJ45
●
● -20 +60 30
●
●
●
●
●
●
●
● 16 ●
●
●
SCALANCE
W786-1 RJ45
● 3x3 1
3
RJ45
●
● -40 +60 65
●
●
●
●
●
●
●
●
●
●
●
●
●
●
SCALANCE
W786-2 RJ45
● 3x3 2
6
RJ45
●
● -40 +60 65
●
●
●
●
●
●
●
●
●
●
● 16 ●
●
●
SCALANCE
W786-2IA RJ45
● 3x3 2
RJ45
●
● -40 +60 65
●
●
●
●
●
●
●
●
●
●
● 16 ●
●
●
SCALANCE
W786-2 SFP
● 3x3 2
6
SFP
-40 +60 65
●
●
●
●
●
●
●
●
●
●
● 16 ●
●
●
6
8
8
SCALANCE
W788C-2 RJ45
●
●
● 3x3 2
6
RJ45
●
● -20 +60 30
●
●
●
●
●
●
SCALANCE
W788C-2 M12
●
●
● 3x3 2
6
M12
●
● -20 +60 65
●
●
●
●
●
●
SCALANCE
W786C-2 RJ45
●
●
● 3x3 2
6
RJ45
●
● -40 +60 65
●
●
●
●
●
●
●
●
●
SCALANCE
W786C-2IA RJ45
●
●
● 3x3 2
RJ45
●
● -40 +60 65
●
●
●
●
●
●
●
●
●
● suitable
6
8
G_IK10_XX_30280
SSH/ HTTPS/ AAdmin password
●
WEP/ WPA/ WPA2
IEEE 802.11i, Hidden SSID
IEEE 802.1x (RADIUS)
EAP-TLS, EAP-TTLS, PEAP
IEEE 802.11e (QoS/WMM)
Slot for removable storage (PLUG)
●
For use in Ex zone 2
●
UV-resistant
●
Resistant against salt spray
●
Resistant to condensation
●
IP protection class
●
Maximum operating temperature (°C)
●
Minimum operating temperature (°C)
PoE (Power-over-Ethernet)
IEEE 802.3at Type 1 (previously 802.3af)
● -20 +60 65
Redundant power supply
Cable-dependent interface
●
Connections for external antennas (R-SMA)
M12
Internal antennas
3
Number of radio interfaces
● 3x3 1
IEEE 802.11a/ b/ g/ h
SCALANCE
W788-1 M12
Operation with SCALANCE WLC IWLAN
controller
Operation with Entereasy WLAN controller
Connections for external antennas (N-Connect)
IEEE 802.11n MIMO (Input x Output Streams)
■ Overview (continued)
1) please follow installation instructions
Function overview of the SCALANCE W access points in accordance with IEEE 802.11n standard
Siemens IK PI · 2012
8/11
© Siemens AG 2011
Industrial Wireless Communication
Industrial Wireless LAN (IWLAN)
Overview of network components
4
● RJ45
●
● -20 +60 65 ●
●
●
●
●
●
●
● ● ● ● ● 16 ● ● ●
SCALANCE
W788-1RR
●
1
2
● RJ45
●
● -20 +60 65 ●
●
●
1
●
●
●
●
● ● ●
SCALANCE
W788-2RR
●
2
4
● RJ45
●
● -20 +60 65 ●
●
●
1
●
●
●
●
● ● ● ● ● 16 ● ● ●
●
1
RJ45/
●
BFOC
● -40 +70 65 ●
●
●
●
●
●
●
●
●
● ● ●
● 8 ● ● ●
●
1
● RJ45/ ●
BFOC
● -40 +70 65 ●
●
●
●
●
●
●
●
●
● ● ●
● 8 ● ● ●
●
2
● RJ45/ ●
BFOC
● -40 +70 65 ●
●
●
●
●
●
●
●
●
● ● ● ● ● 16 ● ● ●
●
2
RJ45/
● BFOC ●
● -40 +70 65 ●
●
●
●
●
●
●
●
●
● ● ● ● ● 16 ● ● ●
●
2
● RJ45
●
● -40 +70 65 ●
●
●
●
●
1
●
●
●
●
● ● ● ● ● 16 ● ● ●
●
2
● RJ45
●
● -40 +70 65 ●
●
●
●
●
1
●
●
●
●
● ● ● ● ● 16 ● ● ●
●
●
2
● RJ45/ ●
BFOC
● -40 +70 65 ●
●
●
●
●
●
●
● ● ●
16
●
●
2
4
RJ45/
● BFOC ●
● -40 +70 65 ●
●
●
●
●
●
●
● ● ●
16
SCALANCE
W786-3PRO
●
3
6
RJ45/
● BFOC ●
● -40 +70 65 ●
●
●
●
●
●
●
●
●
● ● ● ● ● 24 ● ● ●
SCALANCE
W784-1
●
1
2
● RJ45
●
● -20 +60 30
●
●
●
●
●
●
● ● ●
● 8 ● ● ●
SCALANCE
W784-1RR
●
1
2
● RJ45
●
● -20 +60 30
●
●
●
●
●
●
● ● ●
● 8 ● ● ●
● suitable
●
4
4
4
4
4
4
1
1) please follow installation instructions
Function overview of the SCALANCE W access points in accordance with IEEE 802.11a/b/g standard
8/12
Siemens IK PI · 2012
● 8 ● ● ●
● 8 ● ● ●
G_IK10_XX_30183
2
PROFINET IO Diagnostics
SNMP
Syslog
SSH/ HTTPS/ AAdmin password
WEP/ WPA/ WPA2
IEEE 802.11i, Hidden SSID
IEEE 802.1x (RADIUS)
EAP-TLS, EAP-TTLS, PEAP
IEEE 802.11e (QoS/WMM)
STP/ RSTP (IEEE 802.1d/w)
WDS (Wireless Distribution System)
Wireless redundancy between access points
IWLAN client operation possible
2
VLANs (Multi-SSID)
Supports forced roaming
●
iPCF-capable wireless interface
Slot for removable storage (PLUG)
SCALANCE
W788-2PRO
UV-resistant
● ● ●
Resistant against salt spray
●
Resistant to condensation
●
IP protection class
●
Maximum operating temperature (°C)
●
Minimum operating temperature (°C)
●
PoE (Power-over-Ethernet)
IEEE 802.3at Type 1 (previously 802.3af)
Redundant power supply
●
Cable-dependent interface
● -20 +60 65 ●
Antenna diversity
For use in Ex zone 2 1)
Connections for external antennas (N-Connect)
●
Internal antennas
● RJ45
Number of radio interfaces
2
IEEE 802.11n MIMO
1
IEEE 802.11a/ b/ g/ h
●
Operation with SCALANCE WLC IWLAN
controller
Operation with Entereasy WLAN controller
SCALANCE
W788-1PRO
SCALANCE
W786-1PRO
internal
antenna
SCALANCE
W786-1PRO
external
antenna
SCALANCE
W786-2PRO
internal
antenna
SCALANCE
W786-2PRO
external
antenna
SCALANCE
W786-2RR
internal
antenna
SCALANCE
W786-2RR
external
antenna
SCALANCE
W786-2HPW ●
internal
antenna
SCALANCE
W786-2HPW
●
external
antenna
8
Connections for external antennas (R-SMA)
■ Overview (continued)
IEEE 802.11n MIMO (Input x Output Streams)
Number of radio interfaces
SCALANCE
W748-1 M12
●
3x3
1
SCALANCE
W748-1 RJ45
●
3x3
1
● suitable
Redundant power supply
Maximum operating temperature (°C)
IP protection class
Slot for removable storage (PLUG)
SSH/ HTTPS/ AAdmin password
WEP/ WPA/ WPA2
IEEE 802.11i
Number of connectable devices
DHCP Server
PROFINET IO Diagnostics
SNMP
Syslog
M12
●
●
-20 +60
65
●
●
●
8
●
●
●
●
RJ45
●
●
-20 +60
65
●
●
●
8
●
●
●
●
Siemens IK PI · 2012
G_IK10_XX_30281
PoE (Power-over-Ethernet)
IEEE 802.3at Type 1 (previously 802.3af)
3
NAT/ PAT
For use in Ex zone 2
Resistant to condensation
Minimum operating temperature (°C)
Cable-dependent interface
3
Connections for external antennas (N-Connect)
Connections for external antennas (R-SMA)
IEEE 802.11a/ b/ g/ h
© Siemens AG 2011
Industrial Wireless Communication
Industrial Wireless LAN (IWLAN)
Overview of network components
■ Overview (continued)
1) please follow installation instructions
Function overview of the SCALANCE W client modules in accordance with IEEE 802.11n standard
8
8/13
© Siemens AG 2011
Industrial Wireless Communication
Industrial Wireless LAN (IWLAN)
Overview of network components
SSH / HTTPS / Admin password
WEP/ WPA/ WPA2
IEEE 802.11i
Number of connectable devices
●
●
●
1
SCALANCE
W746-1PRO
●
1
2
●
RJ45
●
●
-20 +60 65
●
●
●
●
●
8
●
●
SCALANCE
W747-1RR
●
1
2
●
RJ45
●
●
-20 +60 65
●
●
●
8
●
●
SCALANCE
W744-1
●
1
2
●
RJ45
●
●
-20 +60 30
●
●
●
●
1
SCALANCE
W746-1
●
1
2
●
RJ45
●
●
-20 +60 30
●
●
●
●
8
●
●
SCALANCE
W747-1
●
1
2
●
RJ45
●
●
-20 +60 30
●
●
1
●
●
8
●
●
IWLAN/PB
Link PN IO
●
1
1
●
●
1
●
●
8
Mobile Panel
277 IWLAN
●
1
1
●
●
●
●
ET 200pro
IWLAN
●
1
1
●
●
●
●
● suitable
2
2
0
+60 20
●
RJ45
●
0
+40 65
●
RJ45
0
+55 67
1) please follow installation instructions
●
2) only for configuration download
Function overview of the SCALANCE W client modules in accordance with IEEE 802.11a/b/g standard
8/14
Siemens IK PI · 2012
3) no HTTPS
Syslog
●
1
SNMP
8
RS485
(DPMaster)
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
G_IK10_XX_30184
Slot for removable storage (PLUG)
●
PROFINET IO Diagnostics
For use in Ex zone 2
●
NAT/ PAT
Resistant to condensation
-20 +60 65
DHCP-Server
IP protection class
●
iPCF-capable wireless interface
Redundant power supply
●
Maximum operating temperature (°C)
PoE (Power-over-Ethernet)
IEEE 802.3at Type 1 (previously 802.3af)
RJ45
Minimum operating temperature (°C)
Cable-dependent interface
●
Connections for external antennas
(R-SMA)
Connections for external antennas
(N-Connect)
2
Internal antennas
1
Number of radio interfaces
●
IEEE 802.11n MIMO
SCALANCE
W744-1PRO
IEEE 802.11a/ b/ g/ h
Antenna diversity
■ Overview (continued)
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11n
Overview
■ Overview
The Access Points of the SCALANCE W780 product line are
ideally suited for setting up Industrial Wireless LANs (IWLAN) for
2.4 GHz or 5 GHz. They can be used in all applications that
require a high degree of operational reliability, even in extremely
harsh ambient conditions.
• High transmission rates (up to 450 Mbit/s in conjunction with
Channel Bonding) due to 3x3 MIMO technology (Multiple
Input, Multiple Output);
for this purpose, SCALANCE W Access Points use three
streams each for simultaneous sending and receiving
• Suitable for any application:
- SCALANCE W788 RJ45 for installation in a control cabinet
- SCALANCE W788 M12 for cabinet-free installation indoors
- SCALANCE W786 for outdoor environments with demanding
climatic requirements
• Reliable thanks to rugged, impact-resistant housing,
protected from water and dust (IP65), resistant to shock,
vibration and electromagnetic fields
• Complex applications with redundancy requirements and
high bandwidths, e.g. for video, by using IEEE 802.11n
• Configuration support by means of wizards and online help;
easy management via web server and SNMP
• Fast replacement of devices in event of failure by means of
optional C-PLUG (Configuration Plug)
■ Benefits
• Reliable radio link, e.g. by using MIMO technology and
monitoring of the radio link
• Cost savings due to one single radio network both for
process-critical data and for non-critical communication
• Investment security because all products are compatible with
the internationally recognized WLAN standard IEEE 802.11,
suitable for the unlicensed frequency bands of 2.4 GHz and
5 GHz (ISM bands)
• Implementation of data-intensive applications such as video
streaming through the support of the IEEE 802.11n standard
including Channel Bonding
• Reduced operating costs, because there is no wear of rotating
and moving plant sections
• Cost-effective connection to devices which are remote,
difficult to access or mounted in hostile environments
■ Application
The Access Points of the SCALANCE W780 product line are
designed for both industrial use and for demanding climatic
requirements outdoors. Versions for low-cost integration in
cabinets are also available. They offer a reliable radio
connection, versatile redundancy mechanisms, and fast transfer
of stations from one access point to the next (roaming). In this
manner, processes can be monitored and production failures
through machine downtimes avoided.
Due to the high degree of protection (IP65) and the extended
temperature range from -40 °C to +60 °C, the Access Points are
ideally suited for use in the outdoor area. SCALANCE W
products are silicone-free and can therefore also be used in
paint shops.
When using the RCoax cable (radiating cable), operation is
particularly reliable in conveying technology and all track applications (e.g. storage and retrieval systems).
SCALANCE W786 versions are available with internal antennas
for demanding environmental requirements.
Siemens IK PI · 2012
8/15
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11n
Overview
■ Application (continued)
Application examples:
• Automated guided vehicle systems (AGVS) and suspended
monorails;
prevention of wear and high flexibility in the choice of route
thanks to wireless transmission of data to the vehicles
• Crane;
high flexibility through access to data communication with the
moving unit independent of the location
• Mobile control console;
reliable intervention in the process thanks to data communication over IWLAN with mobile units (e.g. Mobile Panel 277(F)
IWLAN); the number of operator panels is therefore determined by the number of personnel and no longer by the
number of control desks.
• Wireless access to field devices for configuration and testing
• Passenger transportation systems;
transmission of high-quality video streams between the
control center and buses or trains.
• Tunnel application;
reliable radio link since the devices can handle multiple path
propagation better by using the MIMO technology.
• Communication with moving stations (e.g. mobile controls and
devices), container logistics, storage and retrieval machines,
conveyor systems, conveyor belts, rotating machines, trucks
• Wireless coupling of communication segments and bridging
of large distances for fast commissioning and for costeffective networks in which cable routing would be extremely
expensive (e.g. on public roads, rivers, lakes, train lines)
Multipath propagation according to IEEE 802.11a/b/g
SCALANCE
W788-1PRO
SCALANCE
W746-1PRO
SCALANCE
W788-1 M12
Multiple path propagation (MIMO) with SCALANCE W788-1PRO and SCALANCE W788-1 M12
8
8/16
Siemens IK PI · 2012
SCALANCE
W748-1 M12
G_IK10_XX_30268
Multipath propagation according to IEEE 802.11n (MIMO)
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11n
Overview
■ Design
• Radio card (compatible with IEEE 802.11a/b/g/h/n)
permanently installed in the device
• Designed without rotating parts (operation without fans)
• Antennas can either be connected by means of a screw
connection (R-SMA, N-Connect) or they are integrated in the
device
• Function LEDs for optical signaling of faults and operating
states
• 1x PLUG slot
■ Function
A simple radio link can be established with a single Access Point
(infrastructure mode). The Access Point provides an Industrial
Ethernet interface for connection to the wireline network.
Stations such as mobile controllers or a Field PG can move freely
within the radio link and exchange data with other stations
through this Access Point.
Apart from a reliable radio link, the SCALANCE W780 Access
Points are characterized by their support of IT mechanisms:
• IEEE 802.11a/b/g/n for different frequency ranges
• IEEE 802.11h for use in the 5 GHz range outdoors
• IEEE 802.11e for Wireless Multimedia (WMM)
• IEEE 802.11i for security
• Construction of redundant networks with the Rapid Spanning
Tree Protocol (RSTP)
• Virtual networks (VLAN) to logically separate, for example,
different user groups
• Sending the log entries of the SCALANCE W devices to a
Syslog server
• Modern security mechanisms (e.g. network security such as
IEEE 802.1x, RADIUS, EAP mechanisms)
• In client mode:
Network and Port Address Translation (NAT/PAT):
Mapping of private IP addresses and ports to public
addresses
If the radio link of a single Access Point (radio cell) is insufficient,
it can be expanded by further Access Points. The individual
radio cells must overlap so that moving stations can be passed
seamlessly from one Access Point to the next (roaming). This is
performed invisibly to the application. The Access Points must
be able to exchange data via Industrial Ethernet or a Wireless
Distribution System (WDS).
Security
If the Access Points are not connected to Industrial Ethernet
using a wired connection (e.g. no cable tray available for data
line), the operating mode "Wireless Distribution System" must be
selected. An Access Point from the SCALANCE W780 product
line can communicate via WDS with up to eight other Access
Points which are not connected to the data network by a direct
wired connection. Directional additional antennas can be used
to achieve ranges of several thousand meters outdoors.
Access to the devices (HTTPS) is encrypted and secure logon
(SSH) is possible. If a security concept with Virtual Private
Networks (VPN) or the SCALANCE S range is required, the
products can be integrated without any difficulty.
A high degree of data security is achieved by means of the
WPA2/IEEE 802.11i mechanisms. These define modern procedures that control a regular exchange of the complete 128-bit
code as well as performing the access check (authentication) of
a station. The Advanced Encryption Standard (AES) is available
for data encryption.
Diagnostics and management
• Web-based (HTTP/HTTPS) management tool for configuration
and diagnostics using a standard browser
• LEDs for signaling operating states and fault conditions
• Signaling of faults by means of SNMP trap or e-mail to a
network management tool, e.g. SINEMA-Server
8
Siemens IK PI · 2012
8/17
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11n
SCALANCE W788 RJ45 for use in control cabinet
■ Overview
• Especially suitable for applications where the access point is
to be mounted in the control cabinet
• Low-cost alternative for use indoors with less severe
environmental conditions
• The rugged aluminum enclosure with degree of protection
IP30 nevertheless provides protection against mechanical
and electromagnetic stress in industrial areas
■ Design
8
• Rugged aluminum enclosure, shock and vibration-proof, for
high mechanical requirements
• Dust protection with IP30 degree of protection
• For use at ambient temperatures from -20 °C to +60 °C
• Resistant to condensation
• Design suitable for installation in control cabinet
• 3 x R-SMA sockets for the connection of remote antennas
(6 x R-SMA sockets for the versions with two wireless
modules)
• Antenna placement optimized for the 3x3 MIMO technology;
the antennas do not interfere with each other when they are
mounted direct on the device
• 1 x RJ45 connection for 10/100/1000 Mbit/s with Power-overEthernet according to IEEE 802.3at Type 1 (corresponds to
IEEE 802.3af)
• 2 x 24 V DC connection for redundant power infeed
• 1 x PLUG slot
• Function LEDs for optical signaling of faults and operating
states
• Digital input for feeding in a signal from a sensor, for example,
to an SNMP-based network management system
• Digital output for converting a command received over SNMP
into a signal and switching a hardware function
• Mounting: Wall, S7 mounting rail or on 35 mm standard
mounting rail
8/18
Siemens IK PI · 2012
3x R-SMA
(female)
antenna
connections
PLUG slot
Terminal block for
digital input/output
24 V DC
connection
RJ45 connection
(Gigabit)
*B,.B;;B
3x R-SMA (female) antenna connections
Design and interfaces of the SCALANCE W788-2 RJ45 Access Points
Product versions
SCALANCE W788-1 RJ45
• A wireless card permanently installed in the device
SCALANCE W788-2 RJ45
• Two wireless cards permanently installed in the device
■ Function
SCALANCE W788 RJ45 access points can also be operated as
client modules. As an alternative, the SCALANCE W748 RJ45
Client Modules can be used for this mode.
In combination with the SCALANCE W748 RJ45 Client Modules
with degree of protection IP30, an infrastructure can be set up
in which great temperature differences and protection against
dust and water play a somewhat less prominent role.
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11n
SCALANCE W788 RJ45 for use in control cabinet
■ Technical specifications
Order No.
6GK5 788-1FC00-0AA0
6GK5 788-1FC00-0AB0 1)
6GK5 788-2FC00-0AA0
6GK5 788-2FC00-0AB0 1)
Product type designation
SCALANCE W788-1 RJ45
SCALANCE W788-2 RJ45
450 Mbit/s
10 … 1 000 Mbit/s
-
450 Mbit/s
10 … 1 000 Mbit/s
-
1
1
1
1
1
1
RJ45 socket
RJ45 socket
Transmission rate
Transmission rate
• with W-LAN, maximum
• with Industrial Ethernet
• Note
Interfaces
Number of electrical connections
• for network components or
terminal equipment
• for power supply
• for redundant power supply
Design of electrical connection
• for network components or
terminal equipment
• for power supply
4-pin screw terminal, PoE
4-pin screw terminal, PoE
Number of optical connections for
fiber-optic cables at 100 Mbit/s
-
-
Design of optical connection for
fiber-optic cables at 100 Mbit/s
-
-
Design of swap medium C-Plug
Yes
Yes
Number of permanently installed
wireless cards
1
2
Number of internal antennas
-
-
Number of electrical connections
for external antenna(s)
3
6
Design of electrical connection for
external antenna(s)
R-SMA female (socket)
R-SMA female (socket)
Number of digital inputs
1
1
Number of digital outputs
1
1
Design of electrical connection at
the digital inputs/outputs
4-pin screw terminal
4-pin screw terminal
24 V DC, safety extra low voltage
24 V DC/ 1 A
24 V DC, safety extra low voltage
24 V DC/ 1 A
DC
DC
19.2 V
28.8 V
48 V
19.2 V
28.8 V
48 V
48 V
48 V
Interfaces wireless
Inputs/outputs
Signal range
• at the digital input
• at the digital output
8
Supply voltage,
current consumption, power loss
Type of power supply
Power supply
• 1 from terminal block
• 2 from terminal block
• From Power-over-Ethernet
according to IEEE802.3at for
Type 1 and IEEE802.3af
• From Power-over-Ethernet
according to IEEE802.3at for
Type 2
1)
Wireless approval in the USA
Siemens IK PI · 2012
8/19
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11n
SCALANCE W788 RJ45 for use in control cabinet
■ Technical specifications (continued)
Order No.
6GK5 788-1FC00-0AA0
6GK5 788-1FC00-0AB0 1)
6GK5 788-2FC00-0AA0
6GK5 788-2FC00-0AB0 1)
Product type designation
SCALANCE W788-1 RJ45
SCALANCE W788-2 RJ45
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
Relative humidity at 25 °C without
condensation during operation,
maximum
90 %
90 %
IP degree of protection
IP30
IP30
Ambient conditions for operation
-
-
Permissible ambient conditions
Ambient temperature
• During operation
• During storage
• During transport
Design, dimensions and weights
Width of enclosure without antenna
200 mm
200 mm
Height of enclosure without antenna 158 mm
158 mm
Depth of enclosure without antenna
79 mm
79 mm
Net weight
1.7 kg
1.7 kg
Type of mounting: wall mounting
Yes
Yes
2.41 … 2.48 GHz
2.41 … 2.48 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
Number of SSIDs
8
16
Product function
• Dual client
• iHOP
• iPCF
• iPCF-MC
-
-
-
-
8
8
Yes
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
No
No
Yes
No
No
Yes
No
No
Yes
Yes
Yes
Yes
Wireless frequencies
Wireless frequency
• With WLAN in the 2.4 GHz
frequency band
• with WLAN in the 5 GHz frequency
band
Product properties,
functions, components
General
8
Number of iPCF-capable
radio modules
Product functions
Management, configuration,
programming
Number of manageable
IP addresses in the client
Product function
• CLI
• Web-based management
• MIB support
• TRAPs via e-mail
• Configuration with STEP 7
• Configuration with STEP 7 in the
TIA Portal
• SMTP server
• Operation with IWLAN controller
• Operation with Enterasys
WLAN controller
• Forced roaming with IWLAN
• WDS
1)
Wireless approval in the USA
8/20
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11n
SCALANCE W788 RJ45 for use in control cabinet
■ Technical specifications (continued)
Order No.
6GK5 788-1FC00-0AA0
6GK5 788-1FC00-0AB0 1)
6GK5 788-2FC00-0AA0
6GK5 788-2FC00-0AB0 1)
Product type designation
SCALANCE W788-1 RJ45
SCALANCE W788-2 RJ45
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
Yes
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Protocol is supported
• Address Resolution Protocol
(ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
Identification & maintenance
• I&M0 - device-specific
information
• I&M1 - higher-level designation/
location designation
Product functions Diagnostics
Product function
• PROFINET IO diagnostics
• Link check
• Connection monitoring IP-Alive
• Localization by means of
Aeroscout
• SysLog
Product functions VLAN
Product function VLAN with IWLAN
Product functions DHCP
Product function DHCP client
Product functions Redundancy
STP/RSTP protocol is supported
Product functions Security
Product function
• ACL - MAC based
• IEEE 802.1x (radius)
• NAT/NAPT
• Access protection
according to IEEE802.11i
• WPA/WPA2
• TKIP/AES
Protocol is supported SSH
8
Product functions Time
SNTP protocol is supported
1)
Wireless approval in the USA
Siemens IK PI · 2012
8/21
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11n
SCALANCE W788 RJ45 for use in control cabinet
■ Technical specifications (continued)
Order No.
6GK5 788-1FC00-0AA0
6GK5 788-1FC00-0AB0 1)
6GK5 788-2FC00-0AA0
6GK5 788-2FC00-0AB0 1)
Product type designation
SCALANCE W788-1 RJ45
SCALANCE W788-2 RJ45
UL 60950-1 CSA C22.2 No. 60950-1
-
UL 60950-1 CSA C22.2 No. 60950-1
-
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
You can find the latest list of countries at:
www.siemens.com/simatic-net/ik-info
You can find the latest list of countries at:
www.siemens.com/simatic-net/ik-info
No
No
No
No
No
No
No
No
No
No
No
No
No
No
24 V DC screw terminal and screw terminal for digital
input and output included in scope of delivery
24 V DC screw terminal and screw terminal for digital
input and output included in scope of delivery
Standards, specifications,
approvals
Standard
• for EMC of FM
• for hazardous zone
• for CSA and UL safety
• for hazardous zone of CSA and UL
Certificate of suitability
• CE marking
• EC Declaration of Conformity
• C-Tick
• CCC
• Railroad application
according to EN 50155
• e1 approval
• E1 approval
• NEMA4X
Standard for wireless communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Wireless approval
8
Marine classification association
• American Bureau of Shipping
Europe Ltd. (ABS)
• Bureau Veritas (BV)
• Det Norske Veritas (DNV)
• Germanischer Lloyd (GL)
• Lloyds Register of Shipping (LRS)
• Nippon Kaiji Kyokai (NK)
• Polski Rejestr Statkow (PRS)
Accessories
Accessories
1)
Wireless approval in the USA
8/22
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11n
SCALANCE W788 RJ45 for use in control cabinet
■ Odering data
Order No.
Order No.
SCALANCE W788 RJ45 access points
Accessories
IWLAN access points with built-in
wireless interfaces; wireless
networks IEEE 802.11a/b/g/h/n at
2.4/5 GHz up to 450 Mbit/s;
WPA2/AES; Power over Ethernet
(PoE), IP30 degree of protection
(-20 °C to +60 °C);
scope of supply:
Mounting hardware,
4-pin screw terminal for 24 V DC;
4-pin screw terminal for digital
input and output;
manual on CD-ROM;
German/English
C-PLUG
DIN rail mounting adapter
IE FC RJ45 Plug 4 x 2
6GK5 788-1FC00-0AA0
6GK5 788-1FC00-0AB0
SCALANCE W788-2 RJ45
IWLAN Dual Access Point with
two built-in radio interfaces
• National approvals for operation
outside the USA
• National approvals for operation
within the USA 1)
6GK5 798-8ML00-0AB3
DIN rail mounting adapter for
SCALANCE W788 M12 and
SCALANCE W788 RJ45; screw
fixing for mounting on a 35 mm
DIN rail to EN 50 022;
scope of supply:
3 units per pack
SCALANCE W788-1 RJ45
IWLAN Access Point with
one built-in radio interface
• National approvals for operation
outside the USA
• National approvals for operation
within the USA 1)
6GK1 900-0AB00
Swap medium for simple
replacement of devices in the
event of a fault; for storing
configuration data; can be used
in SIMATIC NET products with
PLUG slot
6GK5 788-2FC00-0AA0
6GK5 788-2FC00-0AB0
RJ45 plug connector for Industrial
Ethernet (10/100/1000 Mbit/s)
with a rugged metal enclosure
and integrated insulation
displacement contacts for
connecting Industrial Ethernet FC
installation cables;
180° cable outlet;
for network components and
CPs/CPUs with Industrial Ethernet
interface
• 1 pack = 1 unit
• 1 pack = 10 units
• 1 pack = 50 units
6GK1 901-1BB11-2AA0
6GK1 901-1BB11-2AB0
6GK1 901-1BB11-2AE0
IE FC Standard Cable GP 4x2
6XV1 878-2A
8-core, shielded TP installation
cable for connection to
IE FC RJ45 Plug 4x2 and
IE M12 Plug PRO 4x2;
PROFINET-compliant;
with UL approval;
sold by the meter;
max. length 1000 m,
minimum order 20 m
IE FC Stripping Tool
6GK1 901-1GA00
8
Preadjusted stripping tool
for fast stripping of the
Industrial Ethernet FC cables
Antennas and miscellaneous
IWLAN accessories
1)
see Industrial Wireless LAN/
accessories
Please note national approvals at
www.siemens.com/wireless-approvals
■ More information
Wireless approvals:
Current approvals can be found on the Internet at:
www.siemens.com/wireless-approvals
To assist in selecting the right products for Industrial Wireless
Communication, the SIMATIC NET Selection Tool is available:
Online version:
www.siemens.com/snst
Offline version:
www.siemens.com/snst-download
Siemens IK PI · 2012
8/23
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11n
SCALANCE W788 M12 for the indoor area
■ Overview
■ Design
• Particularly suitable for industrial applications without control
cabinets
• Rugged aluminum enclosure, shock and vibration-proof,
for high mechanical requirements
• High IP65 degree of protection against dust and water jets
• For use at ambient temperatures from -20 °C to +60 °C
• Resistant to condensation
• 3 x N-Connect sockets for the connection of remote antennas
(6 x N-Connect sockets for the versions with two radio
modules)
• Antenna placement optimized for the 3x3 MIMO technology;
the antennas do not interfere with each other when they are
mounted direct on the device
• 1 x M12 connection for 10/100/1000 Mbit/s with Power-overEthernet according to IEEE 802.3at Type 1 (corresponds to
IEEE 802.3af)
• 1 x M12 socket for energy supply (24 V DC)
• 1 x PLUG slot
• Function LEDs for optical signaling of faults and operating
states
• Mounting: Wall, S7 mounting rail or on 35 mm standard
mounting rail
8
3x N-Connect
(female)
connections
for antennas
PLUG slot
24 V DC
connection
M12 connection
(Gigabit)
*B,.B;;B
3x N-Connect (female) connections for antennas
Design and interfaces of the SCALANCE W788-2 M12 Access Points
Product versions
SCALANCE W788-1 M12
• A radio card permanently installed in the device
SCALANCE W788-2 M12
• Two radio cards permanently installed in the device
8/24
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11n
SCALANCE W788 M12 for the indoor area
■ Function
The devices can be installed at the location that is most
favorable for the radio link. The housing and the connectors
resist high levels of shock and vibration loading because all the
connections are screwed or latched. To achieve optimal illumination for special applications, the supplied antennas can be
replaced.
SCALANCE W788 M12 Access Points can also be operated as
client modules. As an alternative, the SCALANCE W748 M12
client modules can be used for this mode.
The devices with two interfaces have two separate radio
modules and behave like two separate devices in the radio
network. This feature can be used to implement cost-effective
solutions, e.g. when a radio interface is used for wireless
connection of a distant production site and the second radio
interface provides a radio link at the Access Point. Local stations
can log in here and move around freely. Two separate radio
modules, however, also permit the setup of redundant radio links
so that a high level of availability can be achieved.
6
5DGLRFHOO
5DGLRFHOO
,QGXVWULDO(WKHUQHW
)LHOG3*
1RWHERRN
$FFHVV3RLQW
6&$/$1&(
:0
$FFHVV3RLQW
6&$/$1&(
:0
6,0$7,&+0,
3&
&OLHQW0RGXOH
6&$/$1&(
:5-
6,0$7,&+0,
6&$/$1&(b
;
3&
6,0$7,&+0,
6&$/$1&(b
;
6
&OLHQW0RGXOH
6&$/$1&(
:5-
3&
6,0$7,&+0,
6&$/$1&(
;
6
6
*B,.B;;B
&OLHQW0RGXOH
6&$/$1&(
:5-
$XWRPDWHG*XLGHG9HKLFOH6\VWHP$*96
Roaming of moving units (e.g. Field PG and mobile controller) in a radio network with two Access Points
Stations, e.g. a Field PG M, can move freely in the RF field of the
SCALANCE W788-1 M12 Access Points for mobile HMI. In
addition, SCALANCE W748-1 M12 Client Modules connect
mobile units with HMI, controller and PC wirelessly to the data
network.
Provided that a delay (several 100 ms) caused by roaming in
accordance with IEEE 802.11 is tolerated by all communication
stations when switching the radio cells, the communication
continues uninterrupted.
The Dual Access Point, SCALANCE W788-2 M12, can provide
two separate radio links. For example, a Field PG can use one
radio link for configuration. For a clear separation of the applications, the communication that is required for the application,
e.g. S7 communication with a controller, can take place via the
second radio link.
Siemens IK PI · 2012
8/25
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11n
SCALANCE W788 M12 for the indoor area
■ Technical specifications
Order No.
6GK5 788-1GD00-0AA0
6GK5 788-1GD00-0AB0 1)
6GK5 788-2GD00-0AA0
6GK5 788-2GD00-0AB0 1)
Product type designation
SCALANCE W788-1 M12
SCALANCE W788-2 M12
450 Mbit/s
10 … 1 000 Mbit/s
-
450 Mbit/s
10 … 1 000 Mbit/s
-
1
1
1
1
1
1
M12 interface (8-pin, A-coded), PoE
M12 interface (8-pin, A-coded), PoE
Transmission rate
Transmission rate
• with W-LAN, maximum
• with Industrial Ethernet
• Note
Interfaces
Number of electrical connections
• for network components or
terminal equipment
• for power supply
• for redundant power supply
Design of electrical connection
• for network components or
terminal equipment
• for power supply
M12 interface (4-pin, A-coded), PoE
M12 interface (4-pin, A-coded), PoE
Number of optical connections for
fiber-optic cables at 100 Mbit/s
-
-
Design of optical connection for
fiber-optic cables at 100 Mbit/s
-
-
Design of swap medium C-Plug
Yes
Yes
Number of permanently installed
radio cards
1
2
Number of internal antennas
-
-
Number of electrical connections
for external antenna(s)
3
6
Design of electrical connection for
external antenna(s)
N-Connect female (socket)
N-Connect female (socket)
DC
DC
19.2 V
19.2 V
28.8 V
28.8 V
48 V
48 V
48 V
48 V
Interfaces wireless
Supply voltage,
current consumption, power loss
Type of power supply
8
Power supply
• 1 from M12 power connector
(A-coded) for redundant power
supply
• 2 from M12 power connector
(A-coded) for redundant power
supply
• From Power-over-Ethernet
according to IEEE802.3at for
Type 1 and IEEE802.3af
• From Power-over-Ethernet
according to IEEE802.3at for
Type 2
1)
Wireless approval in the USA
8/26
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11n
SCALANCE W788 M12 for the indoor area
■ Technical specifications (continued)
Order No.
6GK5 788-1GD00-0AA0
6GK5 788-1GD00-0AB0 1)
6GK5 788-2GD00-0AA0
6GK5 788-2GD00-0AB0 1)
Product type designation
SCALANCE W788-1 M12
SCALANCE W788-2 M12
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
Relative humidity at 25 °C without
condensation during operation,
maximum
90 %
90 %
IP degree of protection
IP65
IP65
Ambient conditions for operation
-
-
Permissible ambient conditions
Ambient temperature
• During operation
• During storage
• During transport
Design, dimensions and weights
200 mm
200 mm
Height of enclosure without antenna 176 mm
Width of enclosure without antenna
176 mm
Depth of enclosure without antenna
79 mm
79 mm
Net weight
1.7 kg
1.7 kg
Type of mounting: wall mounting
Yes
Yes
Type of mounting
-
-
2.41 … 2.48 GHz
2.41 … 2.48 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
Number of SSIDs
8
16
Product function
• Dual client
• iHOP
• iPCF
• iPCF-MC
-
-
-
-
Radio frequencies
Radio frequency
• with WLAN in the 2.4 GHz
frequency band
• with WLAN in the 5 GHz
frequency band
Product properties,
functions, components
General
Number of iPCF-capable
radio modules
1)
8
Wireless approval in the USA
Siemens IK PI · 2012
8/27
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11n
SCALANCE W788 M12 for the indoor area
■ Technical specifications (continued)
Order No.
6GK5 788-1GD00-0AA0
6GK5 788-1GD00-0AB0 1)
6GK5 788-2GD00-0AA0
6GK5 788-2GD00-0AB0 1)
Product type designation
SCALANCE W788-1 M12
SCALANCE W788-2 M12
8
8
Yes
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
No
No
Yes
No
No
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
Yes
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Product functions
Management, configuration,
programming
Number of manageable
IP addresses in the client
Product function
• CLI
• Web-based management
• MIB support
• TRAPS via e-mail
• Configuration with STEP 7
• Configuration with STEP 7 in the
TIA Portal
• SMTP server
• Operation with IWLAN controller
• Operation with Enterasys WLAN
controller
• Forced roaming with IWLAN
• WDS
Protocol is supported
• Address Resolution Protocol (ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
8
Identification & Maintenance
• I&M0 - device-specific
information
• I&M1 - higher-level designation/
location designation
Product functions Diagnostics
Product function
• PROFINET IO diagnostics
• Link check
• Connection monitoring IP-Alive
• Localization by means of
Aeroscout
• SysLog
Product functions VLAN
Product function VLAN with IWLAN
Product functions DHCP
Product function DHCP client
Product functions Redundancy
STP/RSTP protocol is supported
1)
Wireless approval in the USA
8/28
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11n
SCALANCE W788 M12 for the indoor area
■ Technical specifications (continued)
Order No.
6GK5 788-1GD00-0AA0
6GK5 788-1GD00-0AB0 1)
6GK5 788-2GD00-0AA0
6GK5 788-2GD00-0AB0 1)
Product type designation
SCALANCE W788-1 M12
SCALANCE W788-2 M12
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
UL 60950-1 CSA C22.2 No. 60950-1
-
UL 60950-1 CSA C22.2 No. 60950-1
-
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
No
No
No
Yes
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
You can find the latest list of countries at:
www.siemens.com/simatic-net/ik-info
You can find the latest list of countries at:
www.siemens.com/simatic-net/ik-info
No
No
No
No
No
No
No
No
No
No
No
No
No
No
-
-
Product functions Security
Product function
• ACL - MAC based
• IEEE 802.1x (radius)
• NAT/NAPT
• Access protection according to
IEEE802.11i
• WPA/WPA2
• TKIP/AES
SSH protocol is supported
Product functions Time
SNTP protocol is supported
Standards, specifications,
approvals
Standard
• for EMC of FM
• for hazardous zone
• for CSA and UL safety
• for hazardous zone of CSA and UL
Certificate of suitability
• CE mark
• EC Declaration of Conformity
• C-Tick
• CCC
• Railroad application according to
EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet according to
IEEE802.3at for Type 1 and
IEEE802.3af
• Power-over-Ethernet according to
IEEE802.3at for Type 2
Standard for wireless communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Wireless approval
Marine classification association
• American Bureau of Shipping
Europe Ltd. (ABS)
• Bureau Veritas (BV)
• Det Norske Veritas (DNV)
• Germanischer Lloyd (GL)
• Lloyds Register of Shipping (LRS)
• Nippon Kaiji Kyokai (NK)
• Polski Rejestr Statkow (PRS)
8
Accessories
Accessories
1)
Wireless approval in the USA
Siemens IK PI · 2012
8/29
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11n
SCALANCE W788 M12 for the indoor area
■ Ordering data
Order No.
Order No.
SCALANCE W788 M12 Access Points
Accessories
IWLAN access points with built-in
radio interfaces; radio networks
IEEE 802.11a/b/g/h/n at
2.4/5 GHz up to 450 Mbit/s;
WPA2/AES; Power over Ethernet
(PoE), IP65 degree of protection
(-20 °C to +60 °C);
scope of supply:
Mounting hardware;
manual on CD-ROM,
German/English
C-PLUG
DIN rail mounting adapter
6GK5 788-1GD00-0AA0
DIN rail mounting adapter for
SCALANCE W788 M12 and
SCALANCE W788 RJ45;
screw fixing for mounting on a
35 mm DIN rail to EN 50 022;
scope of supply:
3 units per pack
6GK5 788-1GD00-0AB0
IE FC M12 Plug PRO 4 x 2
SCALANCE W788-1 M12
IWLAN Access Point with
one built-in radio interface
• National approvals for operation
outside the USA
• National approvals for operation
within the USA1)
SCALANCE W788-2 M12
IWLAN Dual Access Point with
two built-in radio interfaces
• National approvals for operation
outside the USA
• National approvals for operation
within the USA 1)
6GK1 900-0AB00
Swap medium for simple
replacement of devices in the
event of a fault; for storing
configuration data;
can be used in SIMATIC NET
products with PLUG slot
6GK5 788-2GD00-0AA0
6GK5 788-2GD00-0AB0
6GK5 798-8ML00-0AB3
M12 plug-in connector suitable
for on-site assembly (X-coded,
IP65/IP67), metal enclosure,
insulation/displacement
fast connection method,
for SCALANCE W
• 1 unit
• 8 units
6GK1 901-0DB30-6AA0
6GK1 901-0DB30-6AA8
IE FC Standard Cable GP 4 x 2
6XV1 878-2A
8-core, shielded TP installation
cable for connection to
IE FC RJ45 Plug 4 x 2 and
IE M12 Plug PRO 4 x 2;
PROFINET-compliant;
with UL approval;
sold by the meter;
max. length 1000 m,
minimum order 20 m
IE FC Stripping Tool
6GK1 901-1GA00
Preadjusted stripping tool
for fast stripping of the
Industrial Ethernet FC cables
8
Antennas and miscellaneous
IWLAN accessories
1)
Please note national approvals at
www.siemens.com/wireless-approvals
■ More information
Wireless approvals:
Current approvals can be found on the Internet at:
www.siemens.com/wireless-approvals
To assist in selecting the right products for Industrial Wireless
Communication, the SIMATIC NET Selection Tool is available:
Online version:
www.siemens.com/snst
Offline version:
www.siemens.com/snst-download
8/30
Siemens IK PI · 2012
see Industrial Wireless LAN/
accessories
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11n
SCALANCE W786 RJ45 for the outdoor area
• Especially well suited to applications with high climatic
requirements when installed outdoors and in areas accessible
to the public
■ Design
• Rugged plastic enclosure (plexi-glass type), shock and
vibration-proof for severe mechanical loading
• High IP65 degree of protection against dust and water jets
• For use at ambient temperatures from -40 °C to +60 °C
• Resistant to condensation
• Resistant to UV radiation and saltwater spray
• Design for use outdoors
• 3 x R-SMA sockets for the connection of remote antennas
(6 x R-SMA sockets or six internal antennas for the versions
with two wireless modules)
• Version with 1 x RJ45 connection for 10/100/1000 Mbit/s with
Power-over-Ethernet according to IEEE 802.3at Type 1
(corresponds to IEEE 802.3af)
• Version with two slots for SFP plug-in transceivers
(optical 2-port switch)
• 1 x 24 V DC connection, optional operation with 12 to 24 V DC
or 100 to 240 V AC with power supply integrated into device
• 1 x PLUG slot
• Function LEDs for optical signaling of faults and operating
states
• Mounting: Wall or, with optional mounting set, on S7 mounting
rail, 35 mm standard mounting rail, or on a pole
Infeed of 48 V DC or with
power supplies 100-240 V
AC or
12-24 V DC
Depending on variant:
- RJ45 connection
- Fiber-optic connection
(multimode)
Reset button
C-PLUG
slot
Antenna
connections
depending
on variant
Dependent on variant:
internal antennas in this case
*B,.B;;B
■ Overview
Design and interfaces of the SCALANCE W786 access points
Product versions
SCALANCE W786-1 RJ45
• A wireless card permanently installed in the device
SCALANCE W786-2 RJ45
• Two wireless cards permanently installed in the device
• Versions with:
- Six internal antennas
- Six connections for external antennas
SCALANCE W786-2 SFP
• Two wireless cards permanently installed in the device
Siemens IK PI · 2012
8/31
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11n
SCALANCE W786 RJ45 for the outdoor area
■ Function
In the case of access points with two wireless modules, one
module implements communication of the access points with
each other. The wireless field for the station, e.g. an automated
guided vehicle, is established by the second wireless module.
Wireless coverage of larger areas can therefore be provided
with the same device.
If the minimum length of standard Ethernet cables is insufficient
due to the large distance of the access points from the wired
network, SCALANCE W-786 can also be used in a version with
SFP plug-in transceivers. Depending on the optical SFP plug-in
transceiver used, ranges of up to 120 km can then be achieved.
Antenna
ANT793-8DJ
Antenna
ANT793-6DG
Antenna
ANT793-6DG
Access Point
SCALANCE W786-1 RJ45
configured as Access Point
Radio cell
8
Use of the SCALANCE W786 product line in sectors subject to high climatic requirements
In the case of SCALANCE W786, this only concerns access
points which can, however, be configured as client modules
through Web-based management. Then, depending on the
selected versions, a maximum of one wireless module will be
available as a client.
8/32
Siemens IK PI · 2012
*B,.B;;B
Access Point
SCALANCE
W786-1 RJ45
configured as
Ethernet Client Module
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11n
SCALANCE W786 RJ45 for the outdoor area
■ Technical specifications
Order No.
6GK5 786-1FC00-0AA0
6GK5 786-1FC00-0AB0 1)
6GK5 786-2HC00-0AA0
6GK5 786-2FC00-0AA0
6GK5 786-2HC00-0AB0 1) 6GK5 786-2FC00-0AB0 1)
6GK5 786-2FE00-0AA0
Product type designation
SCALANCE W786-1
RJ45
SCALANCE W786-2IA
RJ45
SCALANCE W786-2
RJ45
SCALANCE W786-2
SFP
450 Mbit/s
10 … 1 000 Mbit/s
-
450 Mbit/s
10 … 1 000 Mbit/s
-
450 Mbit/s
10 … 1 000 Mbit/s
-
450 Mbit/s
100 … 1 000 Mbit/s
-
1
1
1
-
1
1
1
1
1
1
1
0
RJ45 socket
RJ45 socket
RJ45 socket
-
2-pin connector (24 V DC)
or optionally available
power supply adapter
(4-pin 24 V DC or 3-pin
110 to 230 V AC)
2-pin connector (24 V DC)
or optionally available
power supply adapter
(4-pin 24 V DC or 3-pin
110 to 230 V AC)
2-pin connector (24 V DC)
or optionally available
power supply adapter
(4-pin 24 V DC or 3-pin
110 to 230 V AC)
2-pin connector (24 V DC)
or optionally available
power supply adapter
(4-pin 24 V DC or 3-pin
110 to 230 V AC)
Number of optical connections for
fiber-optic cables at 100 Mbit/s
-
-
-
2
Design of optical connection for
fiber-optic cables at 100 Mbit/s
-
-
-
SFP slot
Number of optical connections for
fiber-optic cables at 1000 Mbit/s
-
-
-
2
Design of optical connection for
fiber-optic cables at 1000 Mbit/s
-
-
-
SFP slot
Design of swap medium C-Plug
Yes
Yes
Yes
Yes
Number of permanently installed
wireless cards
1
2
2
2
Number of internal antennas
-
6
-
-
Number of electrical connections
for external antenna(s)
3
-
6
6
Design of electrical connection for
external antenna(s)
R-SMA female (socket)
-
R-SMA female (socket)
R-SMA female (socket)
DC
DC
DC
DC
19.2 V
28.8 V
48 V
19.2 V
28.8 V
48 V
19.2 V
28.8 V
48 V
19.2 V
28.8 V
-
48 V
48 V
48 V
-
100 … 240 V
12 … 24 V
100 … 240 V
12 … 24 V
100 … 240 V
12 … 24 V
100 … 240 V
12 … 24 V
Transmission rate
Transmission rate
• with W-LAN, maximum
• with Industrial Ethernet
• Note
Interfaces
Number of electrical connections
• for network components or
terminal equipment
• for power supply
• for redundant power supply
Design of electrical connection
• for network components or
terminal equipment
• for power supply
Interfaces wireless
Supply voltage,
current consumption, power loss
Type of power supply
Power supply
• 1 from terminal block
• 2 from terminal block
• From Power-over-Ethernet
ac-cording to IEEE802.3at for
Type 1 and IEEE802.3af
• From Power-over-Ethernet according to IEEE802.3at for Type 2
• From optionally integrated
power supply
- With AC
- With DC
1)
Wireless approval in the USA
Siemens IK PI · 2012
8/33
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11n
SCALANCE W786 RJ45 for the outdoor area
■ Technical specifications (continued)
Order No.
6GK5 786-1FC00-0AA0
6GK5 786-1FC00-0AB0 1)
6GK5 786-2HC00-0AA0
6GK5 786-2FC00-0AA0
6GK5 786-2HC00-0AB0 1) 6GK5 786-2FC00-0AB0 1)
6GK5 786-2FE00-0AA0
Product type designation
SCALANCE W786-1
RJ45
SCALANCE W786-2IA
RJ45
SCALANCE W786-2
RJ45
SCALANCE W786-2
SFP
-40 … +60 °C
-40 … +85 °C
-40 … +85 °C
-40 … +60 °C
-40 … +85 °C
-40 … +85 °C
-40 … +60 °C
-40 … +85 °C
-40 … +85 °C
-40 … +60 °C
-40 … +85 °C
-40 … +85 °C
Relative humidity at 25 °C without
condensation during operation,
maximum
100 %
100 %
100 %
100 %
IP degree of protection
IP65
IP65
IP65
IP65
Ambient conditions for operation
When using the
100 … 240 V AC power
supply, an operating
temperature of
-40 °C to +60 °C is
permissible
When using the
100 … 240 V AC power
supply, an operating
temperature of
-40 °C to +60 °C is
permissible
When using the
100 … 240 V AC power
supply, an operating
temperature of
-40 °C to +60 °C is
permissible
When using the
100 … 240 V AC power
supply, an operating
temperature of
-40 °C to +60 °C is
permissible
Permissible ambient
conditions
Ambient temperature
• During operation
• During storage
• During transport
Design, dimensions and weights
Width of enclosure without antenna
251 mm
251 mm
251 mm
251 mm
Height of enclosure without antenna 251 mm
251 mm
251 mm
251 mm
Depth of enclosure without antenna
72 mm
72 mm
72 mm
72 mm
Net weight
2.24 kg
2.24 kg
2.24 kg
2.24 kg
Type of mounting: wall mounting
Yes
Yes
Yes
Yes
Type of mounting
For mast mounting,
35 mm DIN rail mounting
and S7-300 rail mounting,
an additional retaining
plate is required
For mast mounting,
35 mm DIN rail mounting
and S7-300 rail mounting,
an additional retaining
plate is required
For mast mounting,
35 mm DIN rail mounting
and S7-300 rail mounting,
an additional retaining
plate is required
For mast mounting,
35 mm DIN rail mounting
and S7-300 rail mounting,
an additional retaining
plate is required
2.41 … 2.48 GHz
2.41 … 2.48 GHz
2.41 … 2.48 GHz
2.41 … 2.48 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
Number of SSIDs
8
16
16
16
Product function
• Dual client
• iHOP
• iPCF
• iPCF-MC
-
-
-
-
-
-
-
-
Wireless frequencies
Wireless frequency
• With WLAN in the 2.4 GHz
frequency band
• With WLAN in the 5 GHz frequency
band
8
Product properties,
functions, components
General
Number of iPCF-capable
radio modules
1)
Wireless approval in the USA
8/34
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11n
SCALANCE W786 RJ45 for the outdoor area
■ Technical specifications (continued)
Order No.
6GK5 786-1FC00-0AA0
6GK5 786-1FC00-0AB0 1)
6GK5 786-2HC00-0AA0
6GK5 786-2FC00-0AA0
6GK5 786-2HC00-0AB0 1) 6GK5 786-2FC00-0AB0 1)
6GK5 786-2FE00-0AA0
Product type designation
SCALANCE W786-1
RJ45
SCALANCE W786-2IA
RJ45
SCALANCE W786-2
RJ45
SCALANCE W786-2
SFP
8
8
8
8
Yes
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
No
No
Yes
No
No
Yes
No
No
Yes
No
No
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Identification & maintenance
• I&M0 - device-specific information Yes
• I&M1 - higher-level designation/
Yes
location designation
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
Yes
No
No
No
Yes
No
No
No
Yes
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Product functions
Management, configuration,
programming
Number of manageable IP
addresses in the client
Product function
• CLI
• Web-based management
• MIB support
• TRAPs via e-mail
• Configuration with STEP 7
• Configuration with STEP 7 in the
TIA Portal
• SMTP server
• Operation with IWLAN controller
• Operation with Enterasys WLAN
controller
• Forced roaming with IWLAN
• WDS
Protocol is supported
• Address Resolution Protocol (ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
8
Product functions Diagnostics
Product function
• PROFINET IO diagnostics
• Link check
• Connection monitoring IP-Alive
• Localization by means of
Aeroscout
• SysLog
Product functions VLAN
Product function VLAN with IWLAN
Product functions DHCP
Product function DHCP client
Product functions Redundancy
STP/RSTP protocol is supported
1)
Wireless approval in the USA
Siemens IK PI · 2012
8/35
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11n
SCALANCE W786 RJ45 for the outdoor area
■ Technical specifications (continued)
Order No.
6GK5 786-1FC00-0AA0
6GK5 786-1FC00-0AB0 1)
6GK5 786-2HC00-0AA0
6GK5 786-2FC00-0AA0
6GK5 786-2HC00-0AB0 1) 6GK5 786-2FC00-0AB0 1)
6GK5 786-2FE00-0AA0
Product type designation
SCALANCE W786-1
RJ45
SCALANCE W786-2IA
RJ45
SCALANCE W786-2
RJ45
SCALANCE W786-2
SFP
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
UL 60950-1 CSA C22.2
No. 60950-1
-
UL 60950-1 CSA C22.2
No. 60950-1
-
UL 60950-1 CSA C22.2
No. 60950-1
-
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
No
No
Yes
No
No
Yes
No
No
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
You can find the latest list
of countries at:
www.siemens.com/
simatic-net/ik-info
You can find the latest list
of countries at:
www.siemens.com/
simatic-net/ik-info
You can find the latest list
of countries at:
www.siemens.com/
simatic-net/ik-info
You can find the latest list
of countries at:
www.siemens.com/
simatic-net/ik-info
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
24 V DC screw terminal
included in scope of
delivery
24 V DC screw terminal
included in scope of
delivery
24 V DC screw terminal
included in scope of
delivery
24 V DC screw terminal
included in scope of
delivery
Product functions Security
Product function
• ACL - MAC based
• IEEE 802.1x (radius)
• NAT/NAPT
• Access protection according to
IEEE802.11i
• WPA/WPA2
• TKIP/AES
Protocol is supported SSH
Product functions Time
SNTP protocol is supported
Standards, specifications,
approvals
Standard
• for EMC of FM
• for hazardous zone
• for CSA and UL safety
UL 60950-1 CSA C22.2
No. 60950-1
• for hazardous zone of CSA and UL -
Certificate of suitability
• CE marking
• EC Declaration of Conformity
• C-Tick
• CCC
• Railroad application
according to EN 50155
• e1 approval
• E1 approval
• NEMA4X
8
Standard for wireless
communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Wireless approval
Marine classification association
• American Bureau of Shipping
Europe Ltd. (ABS)
• Bureau Veritas (BV)
• Det Norske Veritas (DNV)
• Germanischer Lloyd (GL)
• Lloyds Register of Shipping (LRS)
• Nippon Kaiji Kyokai (NK)
• Polski Rejestr Statkow (PRS)
Accessories
Accessories
1)
Wireless approval in the USA
8/36
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11n
SCALANCE W786 RJ45 for the outdoor area
■ Ordering data
Order No.
Order No.
SCALANCE W786 access points
Accessories
IWLAN access points with built-in
radio interfaces; radio networks
IEEE 802.11a/b/g/h/n at 2.4/
5 GHz up to 450 Mbit/s; WPA2/
AES; Power over Ethernet (PoE),
IP65 degree of protection
(-40°C to +60°C);
scope of supply: Mounting
hardware, 2-pin screw terminal for
24 V DC; manual on CD-ROM;
German/English
C-PLUG
Power supply PS791-2DC
Power supply PS791-2AC
6GK5 786-1FC00-0AA0
6GK5 786-1FC00-0AB0
MS1 mounting set
6GK5 798-8MG00-0AA0
IE FC RJ45 Plug 4 x 2
6GK5 786-2HC00-0AA0
6GK5 786-2HC00-0AB0
SCALANCE W786-2 RJ45
IWLAN access points with two
integrated wireless interfaces and
RJ45 connection
• Six connections for external
antennas
- National approvals for
operation outside the USA
- National approvals for
operation within the USA 1)
6GK5 791-2AC00-0AA0
110 V AC to 230 V AC power
supply for installation in the
SCALANCE W786 products;
operating instructions in
German/English
Mounting set for fixing the
SCALANCE W786 products onto
an S7-300 mounting rail or a
35 mm standard DIN rail
SCALANCE W786-2IA RJ45
IWLAN access points with two
integrated wireless interfaces and
RJ45 connection
• Six internal antennas
- National approvals for
operation outside the USA
- National approvals for
operation within the USA 1)
6GK5 791-2DC00-0AA0
24 V DC power supply for
installation in SCALANCE W786
products; operating instructions
in German/English
SCALANCE W786-1 RJ45
IWLAN access points with one
integrated wireless interface and
RJ45 connection
• Connections for two external
antennas
- National approvals for
operation outside the USA
- National approvals for
operation within the USA 1)
6GK1 900-0AB00
Swap medium for simple
replacement of devices in the
event of a fault; for storing
configuration data; can be used
in SIMATIC NET products with
PLUG slot
6GK5 786-2FC00-0AA0
RJ45 plug connector for Industrial
Ethernet (10/100/1000 Mbit/s)
with a rugged metal enclosure
and integrated insulation
displacement contacts for
connecting Industrial Ethernet FC
installation cables;
180° cable outlet; for network
components and CPs/CPUs with
Industrial Ethernet interface
• 1 pack = 1 unit
• 1 pack = 10 units
• 1 pack = 50 units
6GK1 901-1BB11-2AA0
6GK1 901-1BB11-2AB0
6GK1 901-1BB11-2AE0
6GK5 786-2FC00-0AB0
8
SCALANCE W786-2 SFP
IWLAN access points with two
integrated wireless interfaces and
RJ45 connection
• Six internal antennas
- National approvals for
operation outside the USA
1)
6GK5 786-2FE00-0AA0
Please note national approvals at
www.siemens.com/wireless-approvals
Siemens IK PI · 2012
8/37
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11n
SCALANCE W786 RJ45 for the outdoor area
■ Ordering data
Order No.
Accessories (continued)
IE FC Standard Cable GP 4 x 2
Wireless approvals:
6XV1 878-2A
8-core, shielded TP installation
cable for connection to
IE FC RJ45 Plug 4 x 2 and
IE M12 Plug PRO 4 x 2;
PROFINET-compliant;
with UL approval;
sold by the meter;
max. length 1000 m,
minimum order 20 m
IE FC Stripping Tool
Online version:
www.siemens.com/snst
Offline version:
www.siemens.com/snst-download
6GK1 901-1GA00
Antennas and miscellaneous
IWLAN accessories
see Industrial Wireless LAN/
accessories
SFP plug-in transceiver and
fiber-optic cables
see Media modules for modular
SCALANCE X-300 managed
8/38
Siemens IK PI · 2012
Current approvals can be found on the Internet at:
www.siemens.com/wireless-approvals
To assist in selecting the right products for Industrial Wireless
Communication, the SIMATIC NET Selection Tool is available:
Preadjusted stripping tool
for fast stripping of the
Industrial Ethernet FC cables
8
■ More information
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Controller and Controller Access Points IEEE 802.11n
Overview
■ Overview
The network infrastructures in the industrial and office areas are
coming ever-closer together. This applies also in the area of
wireless communication, causing a constant increase in the
number of access points and WLAN clients to be managed.
If such networks are established with a large number of standalone access points, with each one having to be configured
separately, this results in huge costs for initial configuration and
operation.
■ Benefits
• Cost reductions and thus significant cost savings in commissioning and operating larger IWLAN installations (ten access
points and more) thanks to configuring from a central location
• Investment protection thanks to seamless integration into
existing IWLAN installations or into an existing corporate
WLAN
• Saving on redundant infrastructures (e.g. separate network for
Internet access and voice transmission) thanks to multiple use
of the same infrastructure for different services
• Avoidance of a single point of failure thanks to optional parallel
operation of two controllers; the WLAN remains functional
even if the controller(s) fail(s)
• Increased reliability when operating the IWLAN through
complete, coordinated portfolio of controllers, industrial
access points and SCALANCE W Client Modules, as well as
the suitable accessories (antennas, connecting cables, power
supplies)
Central wireless LAN controllers enable low-cost, user-friendly
and secure operation of large WLAN infrastructures here.
Management of the WLAN clients connected to such WLANs is
significantly simplified thanks to their division into user groups
with different security policies.
The SCALANCE WLC711 Wireless LAN Controller is an IWLAN
controller for centralized management of a wireless LAN in the
industrial environment (configuration, diagnostics, firmware
updates, access control, security settings, coordination).
• Fast establishment of a new WLAN or expansion of an existing
WLAN with the help of the SCALANCE W786C,
SCALANCE W788C and SCALANCE W786-2HPW controllerbased access points
• Parallel operation of different services (e.g. communication
between programmable controllers, Internet access, Voiceover-IP telephony and video transmission) on the same
controller-based WLAN infrastructure
• Seamless transition between production WLAN and corporate
WLAN
• Cost savings in commissioning and operation as well as
increased reliability and security thanks to the central
management functions of the IWLAN controller in comparison
to a WLAN comprising stand-alone access points that have to
be configured individually
8
Siemens IK PI · 2012
8/39
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Controller and Controller Access Points IEEE 802.11n
Overview
■ Application
Office network
Plant network
Seamless roaming between office- and plant networks
WLAN
telephone
S7-300 with
CP 343-1
SCALANCE
WLC711
IWLAN Controller
Enterasys
AP2610
(IEEE
802.11a/b/g)
PDA
Industrial Ethernet
Network
management
Enterasys
AP3640
(IEEE
802.11a/b/g/n)
SCALANCE
W786-2HPW
(IEEE 802.11a/b/g)
IP telephone
SCALANCE
W788C
(IEEE 802.11a/b/g/n)
Router
Database
SCALANCE
W748-1 RJ45
Laptop
Enterasys Wireless Controller
S7-300 with CP 343-1 ERPC
Company-wide WLAN based on Enterasys Wireless Controller and SCALANCE WLC IWLAN Controller
8
The SCALANCE WLC711 IWLAN Controller is the optimal
solution for IWLAN installations from 10 up to 32 access points.
Through the use of the SCALANCE W Access Points and Client
Modules, different applications in the industrial environment or a
comparable environment can communicate via a centrally
managed IWLAN. SCALANCE W Access Points for controller
operation are available for use both outdoors and for cabinetfree use in the industrial environment (e.g. in the production hall).
The WLC711 IWLAN Controller can be integrated into the
corporate WLAN and thus enables the implementation of an
integrated WLAN in the office, outdoor and industrial areas. This
allows operation of mobile WLAN phones and laptops in the
same wireless network, while complying with security policies for
different user groups, and guaranteeing defined quality of
service (QoS) for different devices.
8/40
Siemens IK PI · 2012
G_IK10_XX_30175
Ethernet
IP telephone
system
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Controller and Controller Access Points IEEE 802.11n
Overview
■ Application (continued)
Application examples
With the SCALANCE WLC711 IWLAN Controller, the benefits of
a controller solution, long-familiar in corporate networks, now
also become available to typical industrial and industry-related
applications:
2 x SCALANCE WLC711 in redundancy mode,
each licensed for 16 access points
(tunnel 1 and tunnel 2)
• Plant-wide wireless infrastructures in factory automation and
process automation, e.g. for mobile operator input or logistics
applications
• Industry-related applications, e.g. crane systems and road/
underground rail tunnels where IWLAN is required for transmitting visualization, video, and voice data
Tunnel 1
Industrial Ethernet
2
1
16
...
SCALANCE
W786C
SCALANCE XR324-12M
1
SCALANCE
W788C
SCALANCE
W786C
2
16
SCALANCE XR324-12M
...
Tunnel 2
Tunnel 3
1
2
32
...
SCALANCE XR552-12M
SCALANCE
W786C
SCALANCE
W788C
SCALANCE
W786C
SCALANCE XR552-12M
32
...
2 x SCALANCE WLC711 in redundancy mode,
each licensed for 32 access points
(tunnel 3 and tunnel 4)
Industrial Ethernet
Tunnel 4
G_IK10_XX_30274
2
1
SCALANCE WLC711 IWLAN Controller in redundancy mode
■ Design
WLC711 IWLAN Controller
• 24 V DC power supply
• Enclosure in the design of the SIMATIC Microbox IPC, in
degree or protection IP20 for installation in the control cabinet
• Two 10/100/1000 Mbit/s electrical RJ45 ports
• DIN rail and wall mounting possible
• Ambient temperature in operation 5 °C to 40 °C
Controller-based access points
• Radio card permanently installed in the device
• Versions available that support the WLAN standards
IEEE 802.11a/b/g/n and IEEE 802.11a/b/g
• Versions available with RJ45 electrical port and BFOC optical
port
• Antennas can either be connected by means of a screw
connection (R-SMA, N-Connect) or they are integrated in the
device. The antennas can be replaced within the IWLAN
range
• Function LEDs for optical signaling of faults and operating
states
Siemens IK PI · 2012
8/41
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Controller and Controller Access Points IEEE 802.11n
Overview
■ Function
■ More information
Fundamental principles of the controller-based Industrial
Wireless LAN
The IWLAN controller enables centralized management of an
Industrial Wireless LAN. It automatically detects new access
points, establishes the connection to these, and manages and
coordinates access points and clients. Thanks to the Layer 3
architecture, access points located in different Layer 2 subnetworks can also be managed. This function allows wireless
expansion of an existing Ethernet network without having to
make changes to the existing network topology.
With the IWLAN controller, the IWLAN wireless infrastructure can
be divided into logical, service-based networks (Virtual Network
Services). Different services, security requirements and access
criteria can thus be reliably managed, and different user groups
such as administrators, commissioning engineers, or visitors
can use the same wireless network.
In the same way, different applications such as Voice-over-IP
(VoIP), video and Internet access can use the same infrastructure. The result is optimal capacity utilization of the IWLAN
network.
If applications with high reliability and availability requirements
are to communicate wirelessly, two IWLAN controllers can be
operated redundantly.
The controller-based access points of the SCALANCE W78xC
series can only be used with the IWLAN controller and can only
be configured using the IWLAN controller.
The IWLAN controller connects, manages and coordinates all
access point and clients such that the WLAN environment
appears like several IP subnetworks with central management.
The individual connections are additionally managed here, and
the stations can therefore move securely and reliably throughout
the complete radio network.
Diagnostics and management functions
As well as centralized management and wireless network
configuration, the WLC711 IWLAN controller also offers error
recording, wireless network monitoring, and documentation of
network statistics.
8
8/42
Siemens IK PI · 2012
Supplementary WLAN solutions for office environments can be
found on the Internet at:
www.enterasys.com
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Controller and Controller Access Points IEEE 802.11n
Industrial Wireless LAN Controller
SCALANCE WLC711
■ Overview
• Support for up to 32 access points in standard operation
• Support for up to 64 access points in redundant operation
with two IWLAN controllers
• Supplied with license for 16 access points; expandable with
license to 32 access points in standard operation
• Simultaneous support for up to 512 WLAN clients
• Support for up to 8 VNS segments
• Automatic detection of new access points
• Support for the SCALANCE W78xC controller-based access
points (IEEE 802.11a/b/g/n) and W786-2HPW
(IEEE 802.11a/ b/ g)
■ Application
Container terminal
Automation control center
Industrial Ethernet
SCALANCE
W786-2C
SCALANCE
W786-2C
ANT795-6MT
SCALANCE
XR324-12M
IWLAN Controller
SCALANCE WLC711
ET 200S
ANT7956MT
AGV
ET 200S
SCALANCE
W748-1 RJ45
AGV
SCALANCE
W748-1 RJ45
8
ANT795-6MT
ET 200S
ANT795-6MT
ET 200S
W748-1
RJ45
SCALANCE
W786-2C
W748-1
RJ45
AGV
AGV
SCALANCE
W786-2C
G_IK10_XX_30273
Container ship
AGV = Automated Guided Vehicle
Controller-based IWLAN for applications with a large number of access points, e.g. in a container terminal
Siemens IK PI · 2012
8/43
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Controller and Controller Access Points IEEE 802.11n
Industrial Wireless LAN Controller
SCALANCE WLC711
■ Design
Product versions
SCALANCE WLC711 IWLAN Controller
• IWLAN controller licensed for the connection of up to
16 SCALANCE W78xC and SCALANCE W786-2HPW
controller-based access points
License Key WLC-700
• Capacity upgrade for SCALANCE WLC-700 for supporting up
to 32 SCALANCE W78xC and SCALANCE W786-2HPW
controller-based access points
■ Technical specifications
Order No.
6GK5 711-0XC00-1AA0
6GK5 711-0XC00-1AB0 1)
6GK5 711-0XC00-1AD0 2)
SCALANCE WLC711
Product type designation
SCALANCE WLC711
10 … 1 000 Mbit/s
Product functions
Management, configuration,
programming
Order No.
6GK5 711-0XC00-1AA0
6GK5 711-0XC00-1AB0 1)
6GK5 711-0XC00-1AD0 2)
Product type designation
Transmission rate
Transmission rate with Industrial
Ethernet
Interfaces
Number of electrical connections
• for network components or
terminal equipment
• for power supply
Design of electrical connection
• for network components or
terminal equipment
• for power supply
2
1
RJ45 socket
2-pin screw terminal
Supply voltage,
current consumption, power loss
8
Type of power supply
DC
Supply voltage 1
from terminal block
24 V
Typical current consumed
at 24 V DC
4A
Effective power loss at 24 V DC,
typically
20 W
Product function
• CLI
• Web-based management
• MIB support
• WDS
Protocol is supported
• Address Resolution Protocol
(ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
Permissible ambient conditions
Product function SysLog
Product functions VLAN
Relative humidity at 25 °C without
condensation during operation,
maximum
95 %
IP degree of protection
IP20
Ambient conditions for operation
-
Product function VLAN with IWLAN
Product function DHCP client
262 mm
Height
142 mm
Depth
47 mm
Protocol is supported SSH
Net weight
2 kg
Product functions Time
Type of mounting
• 35 mm DIN rail mounting
• Wall mounting
Yes
Yes
Protocol is supported
• NTP
• SNTP
Design, dimensions and weights
2)
Wireless approval in the USA
Wireless approval in Japan
8/44
Siemens IK PI · 2012
Yes
Yes
No
Product functions Security
Width
1)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Product functions DHCP
Product function
• IEEE 802.1x (radius)
• NAT/NAPT
• Access protection according to
IEEE802.11i
• WPA/WPA2
• TKIP/AES
Type of mounting
No
Product functions Diagnostics
Ambient temperature
• During operation
• During storage
• During transport
5 … 40 °C
-40 … +60 °C
-40 … +60 °C
Yes
Yes
Yes
Yes
Wall mounting using supplied
cabinet brackets
Yes
No
Yes
Yes
Yes
Yes
Yes
No
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Controller and Controller Access Points IEEE 802.11n
Industrial Wireless LAN Controller
SCALANCE WLC711
■ Technical specifications (continued)
Order No.
6GK5 711-0XC00-1AA0
6GK5 711-0XC00-1AB0 1)
6GK5 711-0XC00-1AD0 2)
Order No.
6GK5 711-0XC00-1AA0
6GK5 711-0XC00-1AB0 1)
6GK5 711-0XC00-1AD0 2)
Product type designation
SCALANCE WLC711
Product type designation
SCALANCE WLC711
Product functions
IWLAN controller
Standards, specifications,
approvals
Number of supported access points
• in standard mode with an IWLAN
16
controller
• in redundancy mode with two
32
IWLAN controllers
Certificate of suitability
• CE marking
• EC Declaration of Conformity
• C-Tick
• CCC
• Railroad application according to
EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet according to
IEEE802.3at for Type 1 and
IEEE802.3af
• Power-over-Ethernet according to
IEEE802.3at for Type 2
Product function of the
IWLAN controller:
When supplied with basic license,
16 access points are supported in
standard mode and 32 access
points in redundancy mode. With
capacity upgrade, 32 access
points are supported in standard
mode and 64 access points in
redundancy mode.
Number of supported WLAN clients
per IWLAN controller
512
Number of VNS segments per
IWLAN controller
8
Product function
• Pre-standard (CAPWAP)
• Integral VLAN-VNS
• Auto detection of new access
points
• CDR/RADIUS accounting
• Dynamic Radio Management
• VoIP QoS mapping
(DSCP/TCP-on-WMM)
• VoIP roaming between IP
subnetworks
• VoIP roaming between several
IWLAN controllers
Yes
Yes
Yes
Yes
Yes
Yes
Standard for wireless communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Wireless approval
Yes
Yes
DRM (Dynamic Radio/ RF
Management), Packet Fairness,
Flexible Client Access
(Airtime Fairness), Load
Balancing, Band-Steering
Backup function for IWLAN
controller
Redundancy mode with two
IWLAN controllers
(64 access points in total)
Switching function
Traffic bridged at controller/ traffic
bridged locally at wireless access
point
Design of the interface for public
network access
Internal captive portal
(Web redirection)
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
You can find the latest list of
countries at: www.siemens.com/
simatic-net/ik-info
Accessories
Accessories
Load distribution function
Yes
Yes
Yes
No
No
24 V DC screw terminal and
2 cabinet brackets included in
scope of delivery
8
Product function of the IWLAN
controller
1)
2)
Wireless approval in the USA
Wireless approval in Japan
Siemens IK PI · 2012
8/45
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Controller and Controller Access Points IEEE 802.11n
Industrial Wireless LAN Controller
SCALANCE WLC711
■ Ordering data
Order No.
SCALANCE WLC711
IWLAN Controller
IWLAN controller licensed for the
connection of up to
16 SCALANCE W78xC and
SCALANCE W786-2HPW
controller-based access points
• National approvals for operation
outside North America, Canada,
and Japan (RoW)
• National approvals for operation
in North America, including
Canada (NAM) 1)
• National approvals for operation
in Japan (JP) 1)
License Key WLC-700
Capacity upgrade for SCALANCE
WLC-700 for supporting up to
32 SCALANCE W78xC and
SCALANCE W786-2HPW
controller-based access points
Wireless approvals:
Current approvals can be found on the Internet at:
www.siemens.com/wireless-approvals
To assist in selecting the right products for Industrial Wireless
Communication, the SIMATIC NET Selection Tool is available:
6GK5 711-0XC00-1AA0
Online version:
www.siemens.com/snst
6GK5 711-0XC00-1AB0
Offline version:
www.siemens.com/snst-download
6GK5 711-0XC00-1AD0
6GK5 907-1SB00
Accessories
IE TP Cord RJ45/RJ45
TP cable 4 x 2
with 2 RJ45 connectors
• 0.5 m
•1m
•2m
•6m
• 10 m
6XV1 870-3QE50
6XV1 870-3QH10
6XV1 870-3QH20
6XV1 870-3QH60
6XV1 870-3QN10
LOGO!Power 24 V/4 A
6EP1 332-1SH52
Stabilized power supply;
Input: 100 … 240 V AC,
output: 24 V DC/4 A
1)
Please note national approvals at
www.siemens.com/wireless-approvals
8
8/46
Siemens IK PI · 2012
■ More information
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Controller and Controller Access Points IEEE 802.11n
Controller Access Points
SCALANCE W788C RJ45 for control cabinet
• SCALANCE W788C-2 RJ45 controller-based access points
can only be operated on the SCALANCE WLC IWLAN
Controller
• Support for the WLAN standard IEEE 802.11n, 3x3 MIMO
(compatible with IEEE 802.11a/b/g/h)
• Especially suitable for applications where the access point is
to be mounted in the control cabinet
• Low-cost alternative for use indoors with less severe environmental conditions
• The rugged aluminum enclosure with degree of protection
IP30 nevertheless provides protection against mechanical
and electromagnetic stress in industrial areas
■ Design
• Rugged aluminum enclosure, shock and vibration-proof,
for high mechanical requirements
• Dust protection with IP30 degree of protection
• For use at ambient temperatures from -20 °C to +60 °C
• Resistant to condensation
• Design suitable for installation in control cabinet
• Two built-in wireless cards
• 6 x R-SMA (female) sockets for the connection of remote
antennas
• Antenna placement optimized for the 3x3 MIMO technology;
the antennas do not interfere with each other when they are
mounted direct on the device
• 1 x RJ45 connection for 10/100/1000 Mbit/s with
Power-over-Ethernet according to IEEE 802.3at Type 1
(corresponds to IEEE 802.3af)
• 2 x 24 V DC connection for redundant power infeed
• Mounting: Wall, S7 mounting rail or on 35 mm standard
mounting rail
3x R-SMA (female) antenna connections
3x R-SMA
(female)
antenna
connections
PLUG slot
Terminal block for
digital input/output
24 V DC
connection
RJ45 connection
(Gigabit)
*B,.B;;B
■ Overview
Design and interfaces of the SCALANCE W788C-2 RJ45 controllerbased access points
Product versions
SCALANCE W788C-2 RJ45 (controller-based)
• Two wireless cards permanently installed in the device
Siemens IK PI · 2012
8/47
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Controller and Controller Access Points IEEE 802.11n
Controller Access Points
SCALANCE W788C RJ45 for control cabinet
■ Technical specifications
Order No.
6GK5 788-2FC00-1AA0
Order No.
6GK5 788-2FC00-1AA0
Product type designation
SCALANCE W788C-2 RJ45
Product type designation
SCALANCE W788C-2 RJ45
Transmission rate
Transmission rate
• with W-LAN, maximum
• with Industrial Ethernet
• Note
Design, dimensions and weights
Width of enclosure without antenna
450 Mbit/s
10 … 1 000 Mbit/s
-
Depth of enclosure without antenna
79 mm
Interfaces
Net weight
1.7 kg
Number of electrical connections
• for network components or
terminal equipment
• for power supply
• for redundant power supply
Type of mounting: wall mounting
Yes
Type of mounting
-
Design of electrical connection
• for network components or
terminal equipment
• for power supply
1
1
1
RJ45 socket
4-pin screw terminal, PoE
Number of optical connections for
fiber-optic cables at 100 Mbit/s
-
Design of optical connection for
fiber-optic cables at 100 Mbit/s
-
Design of swap medium C-Plug
No
Interfaces wireless
Number of permanently installed
wireless cards
2
Number of internal antennas
-
Number of electrical connections
for external antenna(s)
6
Design of electrical connection for
external antenna(s)
R-SMA female (socket)
Supply voltage,
current consumption, power loss
Type of power supply
8
200 mm
Height of enclosure without antenna 158 mm
Power supply
• 1 from terminal block
• 2 from terminal block
• From Power-over-Ethernet
according to IEEE802.3at for
Type 1 and IEEE802.3af
• From Power-over-Ethernet
according to IEEE802.3at for
Type 2
DC
19.2 V
28.8 V
48 V
48 V
Permissible ambient conditions
Ambient temperature
• During operation
• During storage
• During transport
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
Relative humidity at 25 °C without
condensation during operation,
maximum
90 %
IP degree of protection
IP30
Ambient conditions for operation
-
Wireless frequencies
Wireless frequency
• With WLAN in the 2.4 GHz
frequency band
• With WLAN in the 5 GHz frequency
band
2.41 … 2.48 GHz
4.9 … 5.8 GHz
Product functions
Management, configuration,
programming
Product function
• Operation with IWLAN controller
• Operation with Enterasys WLAN
controller
Yes
Yes
Standards, specifications,
approvals
Standard
• for EMC of FM
• for hazardous zone
• for CSA and UL safety
UL 60950-1 CSA C22.2
No. 60950-1
• for hazardous zone of CSA and UL -
Certificate of suitability
• CE marking
• EC Declaration of Conformity
• C-Tick
• CCC
• Railroad application according to
EN 50155
• e1 approval
• E1 approval
• NEMA4X
Standard for wireless communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11n
Wireless approval
Marine classification association
• American Bureau of Shipping
Europe Ltd. (ABS)
• Bureau Veritas (BV)
• Det Norske Veritas (DNV)
• Germanischer Lloyd (GL)
• Lloyds Register of Shipping (LRS)
• Nippon Kaiji Kyokai (NK)
• Polski Rejestr Statkow (PRS)
Yes
Yes
Yes
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
You can find the latest list of
countries at: www.siemens.com/
simatic-net/ik-info
No
No
No
No
No
No
No
Accessories
Accessories
8/48
Siemens IK PI · 2012
24 V DC screw terminal and
screw terminal for digital input
and output included in scope of
delivery
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Controller and Controller Access Points IEEE 802.11n
Controller Access Points
SCALANCE W788C RJ45 for control cabinet
■ Ordering data
Order No.
■ More information
SCALANCE W788C RJ45 Controller access points
Wireless approvals:
IWLAN access points for
operating with the SCALANCE
WLC IWLAN Controller; with two
built-in wireless interfaces;
wireless networks IEEE 802.11a/
b/g/h/n at 2.4/5 GHz up to
450 Mbit/s; WPA2/AES; Power
over Ethernet (PoE), IP65 degree
of protection (-20 °C to +60 °C);
scope of delivery: Mounting
hardware; manual on CD-ROM,
German/English
• SCALANCE W788C-2 RJ45
with R-SMA female connections
for six external antennas
Current approvals can be found on the Internet at:
www.siemens.com/wireless-approvals
To assist in selecting the right products for Industrial Wireless
Communication, the SIMATIC NET Selection Tool is available:
Online version:
www.siemens.com/snst
Offline version:
www.siemens.com/snst-download
6GK5 788-2FC00-1AA0
Accessories
DIN rail mounting adapter
6GK5798-8ML00-0AB3
DIN rail mounting adapter for
SCALANCE W788 M12 and
SCALANCE W788 RJ45;
screw fixing for mounting on a
35 mm DIN rail to EN 50 022;
scope of supply: 3 units per pack
IE FC RJ45 Plug 4 x 2
RJ45 plug connector for Industrial
Ethernet (10/100/1000 Mbit/s)
with a rugged metal enclosure
and integrated insulation
displacement contacts for
connecting Industrial Ethernet FC
installation cables;
180° cable outlet; for network
components and CPs/CPUs with
Industrial Ethernet interface
• 1 pack = 1 unit
• 1 pack = 10 units
• 1 pack = 50 units
6GK1 901-1BB11-2AA0
6GK1 901-1BB11-2AB0
6GK1 901-1BB11-2AE0
IE FC Standard Cable GP 4 x 2
6XV1 878-2A
8-core, shielded TP installation
cable for connection to
IE FC RJ45 Plug 4 x 2 and
IE M12 Plug PRO 4 x 2;
PROFINET-compliant;
with UL approval;
sold by the meter;
max. length 1000 m,
minimum order 20 m
IE FC Stripping Tool
8
6GK1 901-1GA00
Preadjusted stripping tool
for fast stripping of the
Industrial Ethernet FC cables
Antennas and miscellaneous
IWLAN accessories
see Industrial Wireless LAN/
accessories
Siemens IK PI · 2012
8/49
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Controller and Controller Access Points IEEE 802.11n
Controller Access Points
SCALANCE W788C M12 for the indoor area
■ Overview
■ Design
• Rugged aluminum enclosure, shock and vibration-proof,
for high mechanical requirements
• High IP65 degree of protection against dust and water jets
• For use at ambient temperatures from -20 °C to +60 °C
• Resistant to condensation
• 6 x N-Connect (female) sockets for the connection of remote
antennas
• Antenna placement optimized for the 3x3 MIMO technology;
the antennas do not interfere with each other when they are
mounted direct on the device
• 1 x M12 connection for 10/100/1000 Mbit/s with Power-overEthernet according to IEEE 802.3at Type 1 (corresponds to
IEEE 802.3af)
• 1 x M12 socket for energy supply (24 V DC)
• Mounting: Wall, S7 mounting rail or on 35 mm standard
mounting rail
3x N-Connect
(female)
connections
for antennas
8
PLUG slot
24 V DC
connection
M12 connection
(Gigabit)
*B,.B;;B
3x N-Connect (female) connections for antennas
• SCALANCE W788C-2 M12 controller-based access points
can only be operated on the SCALANCE WLC IWLAN
Controller
• Support for the WLAN standard IEEE 802.11n, 3x3 MIMO
(compatible with IEEE 802.11a/b/g/h)
• Particularly suitable for industrial applications without control
cabinets
Design and interfaces of the SCALANCE W788C-2 M12 controller-based
access points
Product versions
SCALANCE W786C-2 M12 (controller-based)
• Two wireless cards permanently installed in the device
8/50
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Controller and Controller Access Points IEEE 802.11n
Controller Access Points
SCALANCE W788C M12 for the indoor area
■ Technical specifications
Order No.
6GK5 788-2GD00-1AA0
Order No.
6GK5 788-2GD00-1AA0
Product type designation
SCALANCE W788C-2 M12
Product type designation
SCALANCE W788C-2 M12
Transmission rate
Transmission rate
• with W-LAN, maximum
• with Industrial Ethernet
• Note
Design, dimensions and weights
Width of enclosure without antenna
200 mm
Height of enclosure without antenna
176 mm
Depth of enclosure without antenna
79 mm
Interfaces
Net weight
1.7 kg
Number of electrical connections
• for network components or
terminal equipment
• for power supply
• for redundant power supply
Type of mounting: wall mounting
Yes
Design of electrical connection
• for network components or
terminal equipment
• for power supply
450 Mbit/s
10 … 1 000 Mbit/s
-
1
1
1
M12 interface (8-pin, A-coded),
PoE
M12 interface (4-pin, A-coded),
PoE
Number of optical connections for
fiber-optic cables at 100 Mbit/s
-
Design of optical connection for
fiber-optic cables at 100 Mbit/s
-
Design of swap medium C-Plug
No
Interfaces wireless
Number of permanently installed
wireless cards
2
Number of internal antennas
-
Number of electrical connections
for external antenna(s)
6
Design of electrical connection for
external antenna(s)
N-Connect female (socket)
Power supply
• 1 from M12 power connector
(A-coded) for redundant power
supply
• 2 from M12 power connector
(A-coded) for redundant power
supply
• From Power-over-Ethernet
according to IEEE802.3at for
Type 1 and IEEE802.3af
• From Power-over-Ethernet
according to IEEE802.3at for
Type 2
DC
19.2 V
28.8 V
48 V
48 V
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
Relative humidity at 25 °C without
condensation during operation,
maximum
90 %
IP degree of protection
IP65
Ambient conditions for operation
-
2.41 … 2.48 GHz
4.9 … 5.8 GHz
Product functions
Management, configuration,
programming
Product function
• Operation with IWLAN controller
• Operation with Enterasys WLAN
controller
Yes
Yes
Standards, specifications,
approvals
Standard
• for EMC of FM
• for hazardous zone
• for CSA and UL safety
Certificate of suitability
• CE marking
• EC Declaration of Conformity
• C-Tick
• CCC
• Railroad application
according to EN 50155
• e1 approval
• E1 approval
• NEMA4X
Standard for wireless
communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11n
Wireless approval
Permissible ambient conditions
Ambient temperature
• During operation
• During storage
• During transport
Wireless frequency
• With WLAN in the 2.4 GHz
frequency band
• with WLAN in the 5 GHz
frequency band
• for hazardous zone of CSA and UL
Supply voltage,
current consumption, power loss
Type of power supply
Wireless frequencies
Marine classification association
• American Bureau of Shipping
Europe Ltd. (ABS)
• Bureau Veritas (BV)
• Det Norske Veritas (DNV)
• Germanischer Lloyd (GL)
• Lloyds Register of Shipping (LRS)
• Nippon Kaiji Kyokai (NK)
• Polski Rejestr Statkow (PRS)
UL 60950-1 CSA C22.2
No. 60950-1
Yes
Yes
Yes
No
No
No
No
No
8
Yes
Yes
Yes
Yes
Yes
You can find the latest list of
countries at: www.siemens.com/
simatic-net/ik-info
No
No
No
No
No
No
No
Siemens IK PI · 2012
8/51
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Controller and Controller Access Points IEEE 802.11n
Controller Access Points
SCALANCE W788C M12 for the indoor area
■ Ordering data
Order No.
Wireless approvals:
IWLAN access points for
operating with the SCALANCE
WLC IWLAN Controller; with two
built-in wireless interfaces;
wireless networks IEEE 802.11a/
b/g/h/n at 2.4/5 GHz up to
450 Mbit/s; WPA2/AES; Power
over Ethernet (PoE), IP65 degree
of protection (-20 °C to +60 °C);
scope of delivery: Mounting
hardware; manual on CD-ROM,
German/English
• SCALANCE W788C-2 M12
with N-Connect female connections for six external antennas
Current approvals can be found on the Internet at:
www.siemens.com/wireless-approvals
To assist in selecting the right products for Industrial Wireless
Communication, the SIMATIC NET Selection Tool is available:
Online version:
www.siemens.com/snst
Offline version:
www.siemens.com/snst-download
6GK5 788-2GD00-1AA0
Accessories
IE FC M12 Plug PRO 4 x 2
M12 plug-in connector suitable
for on-site assembly (X-coded,
IP65/IP67), metal enclosure,
insulation/displacement
fast connection method,
for SCALANCE W
• 1 unit
• 8 units
6GK1 901-0DB30-6AA0
6GK1 901-0DB30-6AA8
DIN rail mounting adapter
6GK5 798-8ML00-0AB3
DIN rail mounting adapter for
SCALANCE W788 M12 and
SCALANCE W788 RJ45; screw
fixing for mounting on a 35 mm
DIN rail to EN 50 022;
scope of supply: 3 units per pack
IE FC Standard Cable GP 4 x 2
8
■ More information
SCALANCE W788C M12 Controller Access Points
6XV1 878-2A
8-core, shielded TP installation
cable for connection to
IE FC RJ45 Plug 4 x 2 and IE M12
Plug PRO 4 x 2; PROFINETcompliant; with UL approval;
sold by the meter;
max. length 1000 m,
minimum order 20 m
IE FC Flexible Cable GP 4 x 2
6XV1 878-2B
8-core, shielded TP installation
cable for connection to
IE FC RJ45 Plug 4 x 2 and IE M12
Plug PRO 4 x 2 for occasional
movement; PROFINET-compliant;
with UL approval;
sold by the meter;
max. length 1000 m,
minimum order 20 m
IE FC Stripping Tool
6GK1 901-1GA00
Preadjusted stripping tool
for fast stripping of the
Industrial Ethernet FC cables
Antennas and miscellaneous
IWLAN accessories
8/52
Siemens IK PI · 2012
see Industrial Wireless LAN/
accessories
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Controller and Controller Access Points IEEE 802.11n
Controller Access Points
SCALANCE W786C RJ45 for the outdoor area
■ Overview
■ Design
• Rugged plastic enclosure (plexi-glass type), shock and
vibration-proof for severe mechanical loading
• High IP65 degree of protection against dust and water jets
• For use at ambient temperatures from -40 °C to +60 °C
• Resistant to condensation
• Resistant to UV radiation and saltwater spray
• Design for use outdoors
• 6 x R-SMA sockets for the connection of remote antennas or
six internal antennas
• Version with 1 x RJ45 connection for 10/100/1000 Mbit/s with
Power-over-Ethernet according to IEEE 802.3at Type 1
(corresponds to IEEE 802.3af)
• 1 x 24 V DC connection, optional operation with 12 to 24 V DC
or 100 to 240 V AC with power supply integrated into device
• Mounting: Wall or, with optional mounting set, on S7 mounting
rail, 35 mm standard mounting rail, or on a pole
Infeed of 48 V DC or with
power supplies 100-240 V
AC or
12-24 V DC
Depending on variant:
- RJ45 connection
- Fiber-optic connection
(multimode)
Reset button
C-PLUG
slot
Antenna
connections
depending
on variant
*B,.B;;B
• SCALANCE W786C-2 controller-based access points can
only be operated on the SCALANCE WLC IWLAN Controller
• Support for the WLAN standard IEEE 802.11n, 3x3 MIMO
(compatible with IEEE 802.11a/b/g/h)
• Especially well suited to applications with high climatic
requirements when installed outdoors and in areas accessible
to the public
Dependent on variant:
internal antennas in this case
Design and interfaces of the SCALANCE W786C-2 controller-based
access points
Product versions
SCALANCE W786C-2 (controller-based)
• Two wireless cards permanently installed in the device
• Versions with:
- Six internal antennas
- Six connections for external antennas
Siemens IK PI · 2012
8/53
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Controller and Controller Access Points IEEE 802.11n
Controller Access Points
SCALANCE W786C RJ45 for the outdoor area
■ Technical specifications
Order No.
6GK5 786-2HC00-1AA0
6GK5 786-2FC00-1AA0
Product type designation
SCALANCE W786C-2IA RJ45
SCALANCE W786C-2 RJ45
450 Mbit/s
10 … 1 000 Mbit/s
-
450 Mbit/s
10 … 1 000 Mbit/s
-
1
1
1
1
1
1
RJ45 socket
RJ45 socket
2-pin connector (24 V DC)
or optionally available power supply adapter
(4-pin 24 V DC or 3-pin 110 to 230 V AC)
2-pin connector (24 V DC)
or optionally available power supply adapter
(4-pin 24 V DC or 3-pin 110 to 230 V AC)
Number of optical connections for
fiber-optic cables at 100 Mbit/s
-
-
Design of optical connection for
fiber-optic cables at 100 Mbit/s
-
-
Number of optical connections for
fiber-optic cables at 1000 Mbit/s
-
-
Design of optical connection for
fiber-optic cables at 1000 Mbit/s
-
-
Design of swap medium C-Plug
No
No
Number of permanently installed
wireless cards
2
2
Number of internal antennas
6
-
Number of electrical connections
for external antenna(s)
-
6
Design of electrical connection for
external antenna(s)
-
R-SMA female (socket)
DC
DC
19.2 V
28.8 V
48 V
19.2 V
28.8 V
48 V
48 V
48 V
100 … 240 V
12 … 24 V
100 … 240 V
12 … 24 V
Transmission rate
Transmission rate
• with W-LAN, maximum
• with Industrial Ethernet
• Note
Interfaces
Number of electrical connections
• for network components or
terminal equipment
• for power supply
• for redundant power supply
Design of electrical connection
• for network components or
terminal equipment
• for power supply
Interfaces wireless
8
Supply voltage,
current consumption, power loss
Type of power supply
Power supply
• 1 from terminal block
• 2 from terminal block
• From Power-over-Ethernet
according to IEEE802.3at for
Type 1 and IEEE802.3af
• From Power-over-Ethernet
according to IEEE802.3at for
Type 2
• From optionally integrated power
supply
- With AC
- With DC
8/54
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Controller and Controller Access Points IEEE 802.11n
Controller Access Points
SCALANCE W786C RJ45 for the outdoor area
■ Technical specifications (continued)
Order No.
6GK5 786-2HC00-1AA0
6GK5 786-2FC00-1AA0
Product type designation
SCALANCE W786C-2IA RJ45
SCALANCE W786C-2 RJ45
-40 … +60 °C
-40 … +85 °C
-40 … +85 °C
-40 … +60 °C
-40 … +85 °C
-40 … +85 °C
Relative humidity at 25 °C without
condensation during operation,
maximum
100 %
100 %
IP degree of protection
IP65
IP65
Ambient conditions for operation
When using the 100 … 240 V AC power supply,
an operating temperature of -40 °C to +60 °C is
permissible
When using the 100 … 240 V AC power supply,
an operating temperature of -40 °C to +60 °C is
permissible
Permissible ambient conditions
Ambient temperature
• During operation
• During storage
• During transport
Design, dimensions and weights
Width of enclosure without antenna
251 mm
251 mm
Height of enclosure without antenna
251 mm
251 mm
Depth of enclosure without antenna
72 mm
72 mm
Net weight
2.24 kg
2.24 kg
Type of mounting: wall mounting
Yes
Yes
Type of mounting
For mast mounting,
35 mm DIN rail mounting and S7-300 rail mounting,
an additional retaining plate is required
For mast mounting,
35 mm DIN rail mounting and S7-300 rail mounting,
an additional retaining plate is required
2.41 … 2.48 GHz
2.41 … 2.48 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
Yes
Yes
Yes
Yes
Wireless frequencies
Wireless frequency
• With WLAN in the 2.4 GHz
frequency band
• With WLAN in the 5 GHz
frequency band
Product functions
Management, configuration,
programming
Product function
• Operation with IWLAN controller
• Operation with Enterasys WLAN
controller
8
Siemens IK PI · 2012
8/55
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Controller and Controller Access Points IEEE 802.11n
Controller Access Points
SCALANCE W786C RJ45 for the outdoor area
■ Technical specifications (continued)
Order No.
6GK5 786-2HC00-1AA0
6GK5 786-2FC00-1AA0
Product type designation
SCALANCE W786C-2IA RJ45
SCALANCE W786C-2 RJ45
UL 60950-1 CSA C22.2 No. 60950-1
-
UL 60950-1 CSA C22.2 No. 60950-1
-
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
No
No
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
You can find the latest list of countries at:
www.siemens.com/simatic-net/ik-info
You can find the latest list of countries at:
www.siemens.com/simatic-net/ik-info
No
No
No
No
No
No
No
No
No
No
No
No
No
No
24 V DC screw terminal
included in scope of delivery
24 V DC screw terminal
included in scope of delivery
Standards, specifications,
approvals
Standard
• for EMC of FM
• for hazardous zone
• for CSA and UL safety
• for hazardous zone of CSA
and UL
Certificate of suitability
• CE marking
• EC Declaration of Conformity
• C-Tick
• CCC
• Railroad application according
to EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet according to
IEEE802.3at for Type 1 and
IEEE802.3af
• Power-over-Ethernet according to
IEEE802.3at for Type 2
Standard for wireless
communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11n
Wireless approval
8
Marine classification association
• American Bureau of Shipping
Europe Ltd. (ABS)
• Bureau Veritas (BV)
• Det Norske Veritas (DNV)
• Germanischer Lloyd (GL)
• Lloyds Register of Shipping (LRS)
• Nippon Kaiji Kyokai (NK)
• Polski Rejestr Statkow (PRS)
Accessories
Accessories
8/56
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Controller and Controller Access Points IEEE 802.11n
Controller Access Points
SCALANCE W786C RJ45 for the outdoor area
■ Ordering data
Order No.
Order No.
SCALANCE W786C Controller access points
IE FC RJ45 Plug 4 x 2
IWLAN access points for
operating with the SCALANCE
WLC IWLAN Controller; with two
built-in wireless interfaces;
wireless networks
IEEE 802.11a/b/g/h/n at 2.4/
5 GHz up to 450 Mbit/s; WPA2/
AES; Power over Ethernet (PoE),
IP65 degree of protection
(-40°C to +60°C);
scope of delivery:
Mounting hardware,
2-pin screw terminal for 24 V DC;
manual on CD-ROM;
German/English
• SCALANCE W786C-2IA RJ45
with six internal antennas
• SCALANCE W786C-2 RJ45
with R-SMA female connections
for six external antennas
RJ45 plug connector for Industrial
Ethernet (10/100/1000 Mbit/s)
with a rugged metal enclosure
and integrated insulation
displacement contacts for
connecting Industrial Ethernet FC
installation cables;
180° cable outlet; for network
components and CPs/CPUs with
Industrial Ethernet interface
• 1 pack = 1 unit
• 1 pack = 10 units
• 1 pack = 50 units
6GK1 901-1BB11-2AA0
6GK1 901-1BB11-2AB0
6GK1 901-1BB11-2AE0
IE FC Standard Cable GP 4 x 2
6XV1 878-2A
6GK5 786-2HC00-1AA0
6GK5 786-2FC00-1AA0
Accessories
Power supply PS791-2DC
6GK5 791-2DC00-0AA0
12 to 24 V DC power supply
for installation in SCALANCE
W786C-2 products;
operating instructions
in German/English
Power supply PS791-2AC
IE FC Stripping Tool
6GK5 791-2AC00-0AA0
110 to 230 V C power supply
for installation in SCALANCE
W786C-2 products;
operating instructions
in German/English
MS1 mounting set
8-core, shielded TP installation
cable for connection to
IE FC RJ45 Plug 4 x 2 and
IE M12 Plug PRO 4 x 2;
PROFINET-compliant;
with UL approval;
sold by the meter;
max. length 1000 m,
minimum order 20 m
6GK1 901-1GA00
Preadjusted stripping tool
for fast stripping of the
Industrial Ethernet FC cables
Antennas and miscellaneous
IWLAN accessories
See Industrial Wireless LAN/
accessories
6GK5 798-8MG00-0AA0
Mounting set for fixing the
SCALANCE W786C-2 products
onto an S7-300 mounting rail or a
35 mm standard mounting rail
■ More information
8
Wireless approvals:
Current approvals can be found on the Internet at:
www.siemens.com/wireless-approvals
To assist in selecting the right products for Industrial Wireless
Communication, the SIMATIC NET Selection Tool is available:
Online version:
www.siemens.com/snst
Offline version:
www.siemens.com/snst-download
Siemens IK PI · 2012
8/57
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
Overview
■ Overview
■ Benefits
• Predictable data traffic (strict real-time requirements) and
defined response times on the wireless link
• Reliable wireless link, e.g. due to redundant connection and
cyclic monitoring of the wireless path
• Cost savings due to one single radio network both for
process-critical data and for non-critical communication
• Investment security because all products are compatible with
the internationally recognized WLAN standard IEEE 802.11,
suitable for the unlicensed frequency bands of 2.4 GHz and
5 GHz (ISM bands)
• Reduced operating costs, because there is no wear of rotating
and moving plant sections
• Cost-effective connection to devices which are remote,
difficult to access or in hostile environments
■ Application
8
The access points of the SCALANCE W780 product line are
optimized for the configuration of Industrial Wireless LAN
(IWLAN) wireless networks for 2.4 GHz or 5 GHz with data transmission rates up to 54 Mbit/s. They can be used in all applications that require a high degree of operational reliability,even
under extremely harsh environmental conditions.
• Suitable for any application:
- SCALANCE W784 for installation in a cabinet or integration
in devices
- SCALANCE W788 for cabinet-free installation indoors
- SCALANCE W786 for outdoor environments with demanding
climatic requirements
• Reliable thanks to rugged, impact-resistant housing,
protected from water and dust (IP65), resistant to shock,
vibration and electromagnetic fields
• Approved for operation in hazardous areas in Zone 2
• Demanding applications with real-time and redundancy
requirements, such as PROFINET with PROFIsafe
• In conformance with standards, as it supports IEEE 802.11;
expansions with software functions, especially for applications demanding high reliability, e.g. channel hopping
procedure (iHOP), cyclic real-time data traffic, and very highspeed roaming (iPCF)
• Support with planning, simulation, configuration, site survey
and documentation with the SINEMA E engineering tool,
wizards and online help; easy management with Web server
and SNMP
• Quick commissioning of Access Points with the optional
swap medium PRESET-PLUG and quick device exchange
in case of faults with the optional swap medium C-PLUG
(Configuration Plug)
8/58
Siemens IK PI · 2012
The Access Points of the SCALANCE W780 product line are
designed for both industrial use and for demanding climatic
requirements outdoors. Versions for the inexpensive integration
in cabinets or in devices are also available. They offer a reliable
radio connection, versatile redundancy mechanisms, and fast
transfer of stations from one access point to the next (roaming).
In this manner, processes can be monitored and production
failures through machine downtimes avoided. In addition, Industrial Wireless LAN (IWLAN) can be used in time-critical applications associated with production automation (PROFINET IO) or
for safety-related signals (PROFIsafe).
Due to the high degree of protection (IP65) and the extended
temperature range from -40 °C to +70 °C, the Access Points are
ideally suited for use in the outdoor area. SCALANCE W
products are silicone-free and can therefore also be used in
paint plants.
When using the RCoax cable (radiating cable), operation is
particularly reliable in conveying technology and all track applications (e.g. storage and retrieval systems).
SCALANCE W786 versions are available with internal antennas
for demanding environmental requirements.
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
Overview
■ Application (continued)
Application examples:
• Automated guided vehicles and suspended monorails;
prevention of wear and high flexibility in the choice of route
thanks to wireless transmission of data to the vehicles
• Crane;
high flexibility through access to data communication with the
moving unit independent of the location
• Mobile control console;
reliable intervention in the process thanks to data communication over IWLAN with mobile units (e.g. Mobile Panel 277(F)
IWLAN); the number of operator panels is therefore determined by the number of personnel and no longer by the
number of control desks.
• Wireless access to field devices for configuration and testing
• Communication with moving stations (e.g. mobile controls and
devices), container logistics, storage and retrieval machines,
conveyor systems, conveyor belts, rotating machines, trucks
• Wireless coupling of communication segments and bridging
of large distances for fast commissioning and for costeffective networks in which cable routing would be extremely
expensive (e.g. on public roads, rivers, lakes, train lines)
• Localization of personnel and machines using WLAN tags and
localization software from AeroScout
2 Localization data are transmitted
from the Access Points via
Ethernet to the AeroScout Engine
and evaluated there
(accuracy: 5-10 m)
AeroScout
Engine Software
Industrial Ethernet
1 Tags are sending localization
data via 2.4 GHz (IWLAN) to
the Access Points
AeroScout
Tag
Access Point
SCALANCE
W788-1PRO
3 Optional use of exciters:
Tags also communicate via
125 kHz
(accuracy: max. 20 cm)
AeroScout
Exciter
AeroScout
Tag
G_IK10_XX_30234
AeroScout
Exciter
Access Point
SCALANCE
W788-1PRO
Localization of personnel and machines via an IWLAN infrastructure
■ Design
• Wireless card (compatible with IEEE 802.11a/b/g/h)
permanently installed in the device
• Designed without rotating parts (operation without fans)
• Antennas can either be connected by means of a screw
connection (R-SMA) or integrated into a device
(SCALANCE W786 only)
• Function LEDs for optical signaling of faults and operating
states
• 1 x C-PLUG/PRESET-PLUG slot
Siemens IK PI · 2012
8/59
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
Overview
■ Function
A simple wireless link can be constructed from a single access
point (infrastructure mode). The access point provides an
Industrial Ethernet interface for connection to the wireline
network. Stations, such as mobile controllers or a Field PG can
move freely within the wireless link and exchange data with other
stations through this access point.
If the wireless link of a single access point (wireless cell) is
insufficient, it can be expanded by further access points.
The individual wireless cells must overlap so that moving
stations can be passed seamlessly from one access point to the
next (roaming). This is performed invisibly to the application.
The access points must be able to exchange data via Industrial
Ethernet or a Wireless Distribution System (WDS).
If the Access Points are not connected to Industrial Ethernet
using a wired connection (e.g. no cable tray available for data
line), the operating mode "Wireless Distribution System" must be
selected. An Access Point from the SCALANCE W780 product
line can communicate via WDS with up to eight other Access
Points which are not connected to the data network by a direct
wired connection. Directional additional antennas can be used
to achieve ranges of several thousand meters outdoors.
8
Apart from a reliable radio link, the SCALANCE W780 Access
Points are characterized by their support of IT mechanisms:
• IEEE 802.11a/b/g for different frequency ranges
• IEEE 802.11h for use in the 5 GHz range outdoors
• IEEE 802.11e for Wireless Multimedia (WMM)
• IEEE 802.11i for security
• Construction of redundant networks with the Rapid Spanning
Tree Protocol (RSTP)
• Virtual networks (VLAN) to logically separate, for example,
different user groups
• Sending the log entries of the SCALANCE W devices to a
Syslog server
• Modern security mechanisms (e.g. network security such as
IEEE 802.1x, RADIUS, EAP mechanisms)
• In client mode:
Network and Port Address Translation (NAT/PAT):
Mapping of private IP addresses and ports to public
addresses
8/60
Siemens IK PI · 2012
Security
A high degree of data security is achieved by means of the
WPA2/IEEE 802.11i mechanisms. These define modern procedures that control a regular exchange of the complete 128-bit
code as well as performing the access check (authentication) of
a station. The Advanced Encryption Standard (AES) is available
for data encryption.
Access to the devices (HTTPS) is encrypted and secure logon
(SSH) is possible. If a security concept with Virtual Private
Networks (VPN) or the SCALANCE S range is required, the
products can be integrated without any difficulty.
iFeatures (only for RR versions of the access points)
iPCF (industrial Point Coordination Function)
The iPCF mode is recommendedfor applications with a
requirement for real-time and predictable response times
(deterministic response), even during roaming of moving
stations from one access point to the next. This ensures that
wireless PROFINET IO is supported and that safety-related
signals, e.g. emergency stop, can be integrated into the wireless
link. This means that even video signals from moving stations
can be transmitted with a high level of quality.
The iPCF mechanism expands the IEEE 802.11 standard and
must be available on both the station and the access point
(e.g. SCALANCE W788-1RR). In a wireless link in which iPCF is
used, no IEEE 802.11-compliant stations can be operated.
iPCF is recommended for applications where wireless network
nodes move along predefined paths (e.g. suspended monorail).
RCoax leaky wave cables or directional antennas must be used
for this purpose.
Note:
The IWLAN/PB Link PN IO gateway also supports iPCF
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
Overview
■ Function (continued)
iPCF-MC (iPCF Management Channel)
iPCF-MC is available as further development of iPCF. This mode
should be used if IWLAN stations that also support iPCF-MC
(e.g. Client Modules SCALANCE W747-1RR, Mobile Panel 277F
IWLAN) move freely about in the coverage area (especially
when using omni-directional antennas) and are to exchange
data deterministically. This functionality can only be implemented in combination with RR access point versions with at
least two wireless interfaces.
Note:
Due to the lower bandwidth when using iPCF-MC, we
recommend the iPCF mode for transmitting video signals.
SIMATIC S7-300F
PROFINET with PROFIsafe
Radio cell 2
SCALANCE
W788-2RR
SCALANCE
W786-2RR
G_IK10_XX_30232
Radio cell 1
Mobile Panel 277F IWLAN
Interface 1: Data Channel
Interface 2: Management Channel
Roaming of a mobile panel between two access points while maintaining error-free communication with iPCF-MC
8
Siemens IK PI · 2012
8/61
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
Overview
■ Function (continued)
iHOP
With the supplementary function iHOP, the access point
changes the channel in coordination with its clients. If it detects
interferences which are caused, for example, by sporadically
active WLANs on a channel, it avoids the affected channel
temporarily. Hopping to the other channel is carried out so
rapidly that usually the application is not impaired by the
channel change. If the interferences occur throughout the
complete frequency band, it is even possible to change to
another frequency band (e.g. from 2.4 to 5 GHz).
IWLAN with iHOP on changing channels
This guarantees reliable communication even with interferences
in the wireless field.
Note:
These iFeatures cannot be used in parallel.
Unknown WLANs on fixed channels (interrupter)
SCALANCE
W786-1RR
Access Point
2.4 GHz/
Channel 1
Hopping on the channels
1-13 (2.4 GHz) and
36-140 (5 GHz)
2.4 GHz/
Channel 6
SCALANCE
W747-1RR
Client Module
ANT795-6MN
Antenna
2.4 GHz/
Channel 10
5 GHz/
Channel 40
Automated guided vehicle
system
Machine
Machine with third-party
Access Point
G_IK10_XX_30230
SCALANCE W747-1
Client Module
Coordinated changing of channels by means of a channel hopping procedure (iHOP) to avoid disrupters
&KDQQHO+RSSLQJL+23
Time
Occupied radio channels
(Schematic diagram)
Channel A, partially occupied by
WLAN A
Channel B, partially occupied by
WLAN B
Channel C, partially occupied by
other radio system
Industrial Wireless LAN with channel hopping functionality (iHOP):
SCALANCE W Access Point and Client Module change radio channels in
a cyclic and coordinated manner and so boost reliability of communication
in environments heavily subjected to radio interference.
iHOP function for SCALANCE W access points
Diagnostics and management
• Web-based (HTTP/HTTPS) management tool for configuration
and diagnostics using a standard browser
• Planning, configuration, simulation and measurement of the
wireless link on site (Site Survey) with SINEMA E
8/62
Siemens IK PI · 2012
• LEDs for signaling operating states and fault conditions
• Signaling of faults by means of SNMP trap or e-mail to a
network management tool, e.g. SINEMA-Server
*B,.B;;B
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W784 for use in the control cabinet
■ Overview
■ Design
• Low-profile, compact aluminum enclosure, shock and
vibration-proof for high mechanical requirements
• Dust protection with IP30 degree of protection
• For use at ambient temperatures from -20 °C to +60 °C
• Construction and design suitable for integration in a device or
for installation in a cabinet
• 2 x R-SMA sockets for the connection of remote antennas
• 1 x RJ45 connection for 10/100 Mbit/s with Power-overEthernet according to IEEE 802.3at Type 1 (corresponds to
IEEE 802.3af)
• 1 x 24 V DC connection for redundant power infeed
• 1 x C-PLUG slot
• Function LEDs for optical signaling of faults and operating
states
• Mounting: Wall or, with optional mounting set, on S7 mounting
rail, 35 mm standard mounting rail
• Especially suitable for applications where the access point
is to be mounted in the control cabinet
• Low-cost alternative for use indoors with less severe environmental conditions
• The rugged aluminum enclosure with degree of protection
IP30 nevertheless provides protection against mechanical
and electromagnetic stress in industrial areas
C-PLUG
slot
24 V DC connection
RJ45 connection for 10/100 Mbit/s
(PoE capability acc. to IEEE 802.3af)
*B,.B;;B
2xRSMA connections
for antennas
Design and interfaces of the SCALANCE W784 access points
Product versions
SCALANCE W784-1
• A wireless card permanently installed in the device
SCALANCE W784-1RR
• A radio card permanently installed in the device
for establishing wireless connections with iPCF
Siemens IK PI · 2012
8/63
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W784 for use in the control cabinet
■ Function
SCALANCE W784 access points for control cabinet installation
can also be operated as client modules. As an alternative, the
SCALANCE W740 client modules can be used for this mode.
In combination with the SCALANCE W740 Client Modules with
degree of protection IP30, an infrastructure can be set up in
which great temperature differences and protection against dust
and water play a somewhat less prominent role.
5&RD[&DEOH6HJPHQW
$FFHVV3RLQW
6&$/$1&(
:55LQ
WKHFDELQHW
5&RD[&DEOH6HJPHQW
&OLHQW0RGXOH
6&$/$1&(
:
&OLHQW0RGXOH
6&$/$1&(
:
&OLHQW0RGXOH
6&$/$1&(
:
3DQHO3&
3DQHO3&
3DQHO3&
:LQ$&
:LQ$&
:LQ$&
$FFHVV3RLQW
6&$/$1&(
:55LQ
WKHFDELQHW
*B,.B;;B
,:/$15&RD[&DEOH
Implementing an automatic guided transport system in a wireless link with SCALANCE W784-1RR and RCoax cable.
The mobile automated guided vehicles are integrated in the
IWLAN wireless field over the SCALANCE W747-1 Ethernet
Client Modules. Both the Access Points and the Client Modules
are in the control cabinet.
■ Technical specifications
8
Order No.
6GK5 784-1AA30-2AA0
6GK5 784-1AA30-2AB0 1)
6GK5 784-1AA30-6AA0
6GK5 784-1AA30-6AB0 1)
Product type designation
SCALANCE W784-1
SCALANCE W784-1RR
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous use of several radio
channels, a transmission rate of 108 Mbit/s
is possible (turbo mode)
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous use of several radio
channels, a transmission rate of 108 Mbit/s
is possible (turbo mode)
1
1
1
1
1
1
RJ45 socket
RJ45 socket
4-pin screw terminal, PoE
4-pin screw terminal, PoE
Yes
Yes
Transmission rate
Transmission rate
• with W-LAN, maximum
• with Industrial Ethernet
• Note
Interfaces
Number of electrical connections
• for network components or
terminal equipment
• for power supply
• for redundant power supply
Design of electrical connection
• for network components or
terminal equipment
• for power supply
Design of swap medium C-Plug
1)
Wireless approval in the USA
8/64
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W784 for use in the control cabinet
■ Technical specifications (continued)
Order No.
6GK5 784-1AA30-2AA0
6GK5 784-1AA30-2AB0 1)
6GK5 784-1AA30-6AA0
6GK5 784-1AA30-6AB0 1)
Product type designation
SCALANCE W784-1
SCALANCE W784-1RR
Number of permanently installed
wireless cards
1
1
Number of electrical connections
for external antenna(s)
2
2
Design of electrical connection for
external antenna(s)
R-SMA female (socket)
R-SMA female (socket)
Interfaceswireless
Supply voltage,
current consumption, power loss
Type of power supply
DC
DC
Supply voltage
• 1 from terminal block
• 2 from terminal block
• From Power-over-Ethernet
according to IEEE802.3at for
Type 1 and IEEE802.3af
24 V
48 V
48 V
24 V
48 V
48 V
Current consumed
• At 24 V DC, typical
• At 48 V DC, typical
• With Power-over-Ethernet
according to IEEE802.3at for
Type 1 and IEEE802.3af, typical
0.23 A
0.12 A
0.12 A
0.23 A
0.12 A
0.12 A
Effective power loss
• At 24 V DC, typical
• At 48 V DC, typical
• With Power-over-Ethernet
according to IEEE802.3at for
Type 1 and IEEE802.3af, typical
6W
6W
6W
6W
6W
6W
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
Relative humidity at 25 °C without
condensation during operation,
maximum
90 %
90 %
IP degree of protection
IP30
IP30
Ambient conditions for operation
-
-
Width of enclosure without antenna
100 mm
100 mm
Height of enclosure without antenna
205 mm
205 mm
Depth of enclosure without antenna
20 mm
20 mm
Net weight
0.29 kg
0.29 kg
Type of mounting
• S7-300 rail mounting
• Wall mounting
Yes
Yes
For mounting on 35 mm DIN rail and S7-300 rail,
an additional adapter plate is required
For mounting on 35 mm DIN rail and S7-300 rail,
an additional adapter plate is required
Permissible ambient conditions
Ambient temperature
• During operation
• During storage
• During transport
8
Design, dimensions and weights
Type of mounting
1)
Wireless approval in the USA
Siemens IK PI · 2012
8/65
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W784 for use in the control cabinet
■ Technical specifications (continued)
Order No.
6GK5 784-1AA30-2AA0
6GK5 784-1AA30-2AB0 1)
6GK5 784-1AA30-6AA0
6GK5 784-1AA30-6AB0 1)
Product type designation
SCALANCE W784-1
SCALANCE W784-1RR
2.41 … 2.48 GHz
2.41 … 2.48 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
Number of SSIDs
8
8
Product function
• Dual client
• iHOP
• iPCF
• iPCF-MC
No
No
No
No
Yes
Yes
Yes
No
0
1
8
8
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Identification & maintenance
• I&M0 – device-specific information Yes
• I&M1 – higher-level designation/
Yes
location designation
Yes
Yes
Wireless frequencies
Wireless frequency
• With WLAN in the 2.4 GHz
frequency band
• With WLAN in the 5 GHz
frequency band
Product properties,
functions, components
General
Number of iPCF-capable radio
modules
Product functions
Management, configuration,
programming
Number of manageable IP
addresses in the client
8
Product function
• CLI
• Web-based management
• MIB support
• TRAPs via e-mail
• Configuration with STEP 7
• Configuration with STEP 7 in the
TIA Portal
• SMTP server
• Operation with IWLAN controller
• Operation with Enterasys WLAN
controller
• iQoS
• Forced roaming with IWLAN
• WDS
Protocol is supported
• Address Resolution Protocol (ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
1)
Wireless approval in the USA
8/66
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W784 for use in the control cabinet
■ Technical specifications (continued)
Order No.
6GK5 784-1AA30-2AA0
6GK5 784-1AA30-2AB0 1)
6GK5 784-1AA30-6AA0
6GK5 784-1AA30-6AB0 1)
Product type designation
SCALANCE W784-1
SCALANCE W784-1RR
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
FM 3611: Class I, Division 2,
Groups A,B,C,D, T4 / Class 1, Zone 2, Group IIC, T4
EN 60079-15:2005, EN 60079-0:2006,
II 3 G Ex nA II T4 KEMA 07 ATEX 0145X
(only approved in connection with an enclosure with
degree of protection of at least IP 54)
UL 60950-1 CSA C22.2 No. 60950-1
ISA 12.12.01-2000, CSA C22.2 No. 213-M1987,
CL. 1, Div. 2, GP. A,B,C,D, T4 / CL. 1, Zone 2,
GP IIC, T4 / CL. 1, Zone 2, AEx nC IIC, T4
(only approved in connection with an enclosure with
degree of protection of at least IP 54)
FM 3611: Class I, Division 2,
Groups A,B,C,D, T4 / Class 1, Zone 2, Group IIC, T4
EN 60079-15:2005, EN 60079-0:2006,
II 3 G Ex nA II T4 KEMA 07 ATEX 0145X
(only approved in connection with an enclosure with
degree of protection of at least IP 54)
UL 60950-1 CSA C22.2 No. 60950-1
ISA 12.12.01-2000, CSA C22.2 No. 213-M1987,
CL. 1, Div. 2, GP. A,B,C,D, T4 / CL. 1, Zone 2,
GP IIC, T4 / CL. 1, Zone 2, AEx nC IIC, T4
(only approved in connection with an enclosure with
degree of protection of at least IP 54)
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Product functions Diagnostics
Product function
• PROFINET IO diagnostics
• Link check
• Connection monitoring IP-Alive
• Localization by means of
Aeroscout
• SysLog
Product functions VLAN
Product function VLAN with IWLAN
Product functions DHCP
Product function DHCP client
Product functions Redundancy
STP/RSTP protocol is supported
Product functions Security
Product function
• ACL – MAC based
• IEEE 802.1x (radius)
• NAT/NAPT
• Access protection
according to IEEE802.11i
• WPA/WPA2
• TKIP/AES
Protocol is supported SSH
Product functions Time
SNTP protocol is supported
Standards, specifications,
approvals
Standard
• for EMC of FM
• for hazardous zone
• for CSA and UL safety
• for hazardous zone of CSA
and UL
Certificate of suitability
• CE marking
• EC Declaration of Conformity
• C-Tick
• CCC
• Railroad application according to
EN 50155
• e1 approval
• E1 approval
• Power-over-Ethernet according to
IEEE802.3at for Type 1 and
IEEE802.3af
1)
Wireless approval in the USA
Siemens IK PI · 2012
8/67
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W784 for use in the control cabinet
Order No.
6GK5 784-1AA30-2AA0
6GK5 784-1AA30-2AB0 1)
6GK5 784-1AA30-6AA0
6GK5 784-1AA30-6AB0 1)
Product type designation
SCALANCE W784-1
SCALANCE W784-1RR
Standard for wireless
communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
No
You can find the latest list of countries at:
www.siemens.com/simatic-net/ik-info
You can find the latest list of countries at:
www.siemens.com/simatic-net/ik-info
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
No
Yes
Yes
Yes
No
24 V DC screw terminal
included in scope of delivery
24 V DC screw terminal
included in scope of delivery
Wireless approval
Marine classification association
• American Bureau of Shipping
Europe Ltd. (ABS)
• Bureau Veritas (BV)
• Det Norske Veritas (DNV)
• Germanischer Lloyd (GL)
• Lloyds Register of Shipping (LRS)
• Nippon Kaiji Kyokai (NK)
• Polski Rejestr Statkow (PRS)
Accessories
Accessories
1)
Wireless approval in the USA
■ Ordering data
Order No.
Order No.
SCALANCE W784 access points
8
IWLAN access points with
built-in wireless interfaces;
wireless networks
IEEE 802.11a/b/g/h at 2.4/5 GHz
up to 54 Mbit/s; WPA2/AES;
Power over Ethernet (PoE),
IP30 degree of protection
(-20 °C to +60 °C);
scope of supply:
Mounting hardware,
24 V DC screw terminal;
manual on CD-ROM;
German/English
SCALANCE W784-1RR
IWLAN Access Point with one
built-in radio interface
for establishment of radio links
with iPCF
• National approvals for operation
outside the USA
• National approvals for operation
within the USA1)
SCALANCE W784-1
IWLAN Access Points with one
built-in radio interface
• National approvals for operation
outside the USA
• National approvals for operation
within the USA1)
1)
6GK5 784-1AA30-2AA0
6GK5 784-1AA30-2AB0
Please note national approvals at
www.siemens.com/wireless-approvals
8/68
Siemens IK PI · 2012
6GK5 784-1AA30-6AA0
6GK5 784-1AA30-6AB0
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W784 for use in the control cabinet
■ Ordering data
Order No.
Accessories
C-PLUG
6GK1 900-0AB00
Swap medium for simple
replacement of devices
in the event of a fault;
for storing configuration data;
can be used in SIMATIC NET
products with PLUG slot
PRESET-PLUG
6GK5 798-8AB00
Swap medium for simple initial
startup of SCALANCE W access
points and client modules,
as well as IWLAN/PB Link PN IO
SIMATIC Mobile Panel 277F
IWLAN
• Communication via WLAN
(PROFINET)
with acknowledgement button
and emergency stop button
• Communication via WLAN
(PROFINET)
with acknowledgment button
and emergency stop button
with integrated handwheel,
key-operated switch, and two
illuminated pushbuttons
Note:
Please also order the desktop
power supply or battery charger!
• Table-top power supply incl.
power cable for EU, US, UK, JP
(only suitable for operation
under laboratory/office conditions)
• Charger for safe storage and
charging the device incl. lock for
securing the device in the
charger. Charging capabilities
for up to two additional batteries
• Additional battery with LED
indicator for indicating the
charge status
• Transponder incl. batteries
(3x AA)
Order No.
IE FC RJ45 Plug 180 2x2
6AV6 645-0DB01-0AX0
6AV6 645-0DC01-0AX0
RJ45 plug connector for Industrial
Ethernet with a rugged metal
enclosure and integrated
insulation-displacement contacts
for connecting Industrial Ethernet
FC installation cables;
with a 180° cable outlet;
for network components and
CPs/CPUs with Industrial Ethernet
interface
• 1 pack = 1 unit
• 1 pack = 10 units
• 1 pack = 50 units
6GK1 901-1BB10-2AA0
6GK1 901-1BB10-2AB0
6GK1 901-1BB10-2AE0
IE FC Standard Cable GP 2 x 2
6XV1 840-2AH10
4-core, shielded TP installation
cable for connection to IE
FC Outlet RJ45/ IE FC RJ45 Plug;
PROFINET-compliant;
with UL approval;
sold by the meter;
max. length 1000 m,
minimum order 20 m
IE FC Stripping Tool
6GK1 901-1GA00
Preadjusted stripping tool
for fast stripping of the
Industrial Ethernet FC cables
IE TP Cord RJ45/RJ45
6AV6 671-5CN00-0AX1
6AV6 671-5CE00-0AX0
6AV6 671-5CL00-0AX0
6AV6 671-5CM00-0AX0
TP cable 4 x 2
with 2 RJ45 connectors
• 0.5 m
•1m
•2m
•6m
• 10 m
6XV1 870-3QE50
6XV1 870-3QH10
6XV1 870-3QH20
6XV1 870-3QH60
6XV1 870-3QN10
MS2 mounting set
6GK5 798-8MJ00-0AA0
Mounting set for fixing the
SCALANCE W784 products onto
an S7-300 mounting rail or a
35 mm standard DIN rail
Antennas and miscellaneous
IWLAN accessories
See Industrial Wireless LAN/
accessories
■ More information
Wireless approvals:
Current approvals can be found on the Internet at:
www.siemens.com/wireless-approvals
To assist in selecting the right products for Industrial Wireless
Communication, the SIMATIC NET Selection Tool is available:
Online version:
www.siemens.com/snst
Offline version:
www.siemens.com/snst-download
Siemens IK PI · 2012
8/69
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W788 for the indoor area
■ Overview
■ Design
• Particularly suitable for industrial applications without
control cabinets.
• Rugged metal enclosure, shock and vibration-proof for high
mechanical requirements in industrial applications designed
without cabinets
• High IP65 degree of protection against dust and water jets
• For use at ambient temperatures from -20 °C to +60 °C
• Resistant to condensation
• 2 x R-SMA sockets for the connection of remote antennas
(4 x R-SMA for the versions with two radio modules)
• 1 x hybrid socket for data and energy line for infeed over the
IE FC Modular Outlet or for supplying with Power-overEthernet according to IEEE 802.3at Type 1 (corresponds to
IEEE 802.3af)
• 1 x M12 socket for redundant power infeed (18 to 32 V DC,
48 V DC), e.g. in conjunction with the PS791-1PRO
(90 to 265 V AC) power supply
• 1 x C-PLUG slot
• Function LEDs for optical signaling of faults and operating
states
• Mounting: Wall, S7-300 mounting rail (90 mm length, vertically
mounted, bolts included in scope of supply), or with optional
mounting aid on 35 mm DIN rail
2x antenna,
removable
for SCALANCE W788-2PRO:
2x additional sockets
for separate antennas
Rear:
C-PLUG
Power
8
Socket
guard
10/100 Mbit/s
Industrial Ethernet
Redundant
power
Design and interfaces of the SCALANCE W788 access points
Product versions
SCALANCE W788-1PRO
• A wireless card permanently installed in the device
SCALANCE W788-1RR
• A radio card permanently installed in the device
for establishing wireless connections with iPCF
SCALANCE W788-2PRO
• Two wireless cards permanently installed in the device
SCALANCE W788-1RR
• Two wireless cards permanently installed in the device
for establishing wireless connections with iPCF
8/70
Siemens IK PI · 2012
*B,.B;;B
Hybrid
socket
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W788 for the indoor area
■ Function
The devices can be installed at the location that is most
favorable for the wireless field. The enclosures and the
connectors resist high levels of shock and vibration loading
because all the connections are screwed or latched. To achieve
optimal illumination for special applications, the supplied
antennas can be replaced.
The devices with two interfaces have two separate wireless
modules and behave like two separate devices in the wireless
network. This feature can be used to implement cost-effective
solutions, e.g. when a wireless interface is used for wireless
connection of a distant production site and the second wireless
interface provides a wireless field at the access point. Local
stations can log in here and move around freely. Two separate
wireless modules, however, also permit the setup of redundant
wireless fields so that a high level of operational reliability can be
achieved.
SCALANCE W788 access points can also be operated as client
modules. As an alternative, the SCALANCE W740 client
modules can be used for this mode.
6
5DGLRFHOO
5DGLRFHOO
,QGXVWULDO(WKHUQHW
)LHOG3*
1RWHERRN
$FFHVV3RLQW
6&$/$1&(
:352
$FFHVV3RLQW
6&$/$1&(
:352
6,0$7,&+0,
&OLHQW0RGXOH
6&$/$1&(
:352
3&
6,0$7,&+0,
6&$/$1&(
;
3&
6,0$7,&+0,
3&
6&$/$1&(
;
6
6,0$7,&+0,
6&$/$1&(
;
6
6
*B,.B;;B
&OLHQW0RGXOH
6&$/$1&(
:352
'ULYHUOHVVWUDQVSRUWDWLRQV\VWHP$*96
Roaming of moving units (e.g. Field PG and mobile controller) in a wireless network with two access points
Stations, e.g. a Field PG M, can move freely in the wireless field
of the SCALANCE W788-1PRO access points for mobile HMI.
In addition, SCALANCE W746-1PRO connects mobile HMI,
controller and PC units wirelessly to the data network.
The IWLAN wireless coverage of SCALANCE W788-1PRO
permits S7 communication and open communication between
the devices on the AGVs and stationary S7-400, as well as on the
stationary SIMATIC HMI device.
Provided that a delay (several 100 ms) caused by roaming in
accordance with IEEE 802.11 is tolerated by all communication
stations when switching the wireless cells, the communication
continues uninterrupted.
If very fast update times are necessary, e.g. for PROFINET IO
communication, access points and client modules that support
the iPCF function for very fast roaming and deterministic data
traffic are to be used, for example SCALANCE W788-1RR and
W747-1RR.
When an extremely reliable wireless field is essential, it is
recommended that the RCoax Cable is used as an alternative to
conventional antennas. This leaky-wave cable is a special
antenna along which a wireless field propagates and which is
therefore suitable for applications in which, for example, nodes
move along a rail but must have non-contact connection to the
data network to prevent wear from collector wires.
Siemens IK PI · 2012
8/71
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W788 for the indoor area
■ Function (continued)
5DGLRFHOO
$FFHVV3RLQW
6&$/$1&(
:55
5&RD[&DEOH
$QWHQQD
$17'1
*B,.B;;B
+DQJHU
+DQJHU
+DQJHU
)LHOG3*1RWHERRN
+DQJHU
+DQJHU
,:/$13%
/LQN31,2
The Field PG accesses a wireless interface of SCALANCE W788-2RR for configuring, the other interface carries out communication
with the RCoax cable using iPCF
The dual access point, SCALANCE W788-2RR, can provide two
separate wireless fields. For example, a Field PG can use one
wireless field for configuration. For clear separation of the appli-
cations an RCoax cable can be used to implement contactless
PROFINET I/O data communication with the mobile suspension
gear over an IWLAN/PB Link.
■ Technical specifications
8
Order No.
6GK5 788-1AA60-2AA0
6GK5 788-2AA60-2AA0
6GK5 788-1AA60-6AA0
6GK5 788-2AA60-6AA0
6GK5 788-1AA60-2AB01) 6GK5 788-2AA60-2AB01) 6GK5 788-1AA60-6AB01) 6GK5 788-2AA60-6AB01)
Product type designation
SCALANCE W788-1PRO
SCALANCE W788-2PRO
SCALANCE W788-1RR
SCALANCE W788-2RR
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous
use of several radio
channels, a transmission
rate of 108 Mbit/s is
possible (turbo mode)
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous
use of several radio
channels, a transmission
rate of 108 Mbit/s is
possible (turbo mode)
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous
use of several radio
channels, a transmission
rate of 108 Mbit/s is
possible (turbo mode)
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous
use of several radio
channels, a transmission
rate of 108 Mbit/s is
possible (turbo mode)
1
1
1
1
1
1
1
1
1
1
1
1
Hybrid socket, RJ45
integrated
M12 interface
(4-pin, A-coded), hybrid
socket, PoE
Hybrid socket, RJ45
integrated
M12 interface
(4-pin, A-coded), hybrid
socket, PoE
Hybrid socket, RJ45
integrated
M12 interface
(4-pin, A-coded), hybrid
socket, PoE
Hybrid socket, RJ45
integrated
M12 interface
(4-pin, A-coded), hybrid
socket, PoE
Yes
Yes
Yes
Yes
Transmission rate
Transmission rate
• with W-LAN, maximum
• with Industrial Ethernet
• Note
Interfaces
Number of electrical connections
• for network components or
terminal equipment
• for power supply
• for redundant power supply
Design of electrical connection
• for network components or
terminal equipment
• for power supply
Design of swap medium C-Plug
1)
Wireless approval in the USA
8/72
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W788 for the indoor area
■ Technical specifications (continued)
Order No.
6GK5 788-1AA60-2AA0
6GK5 788-2AA60-2AA0
6GK5 788-1AA60-6AA0
6GK5 788-2AA60-6AA0
6GK5 788-1AA60-2AB01) 6GK5 788-2AA60-2AB01) 6GK5 788-1AA60-6AB01) 6GK5 788-2AA60-6AB01)
Product type designation
SCALANCE W788-1PRO
SCALANCE W788-2PRO
SCALANCE W788-1RR
SCALANCE W788-2RR
Number of permanently installed
wireless cards
1
2
1
2
Number of electrical connections
for external antenna(s)
2
4
2
4
Design of electrical connection for
external antenna(s)
R-SMA female (socket)
R-SMA female (socket)
R-SMA female (socket)
R-SMA female (socket)
DC
DC
DC
DC
24 V
24 V
24 V
24 V
48 V
48 V
48 V
48 V
24 V
24 V
24 V
24 V
48 V
48 V
48 V
48 V
48 V
48 V
48 V
48 V
Current consumed
• At 24 V DC, typical
• At 48 V DC, typical
• With Power-over-Ethernet
according to IEEE802.3at for
Type 1 and IEEE802.3af, typical
0.25 A
0.125 A
0.125 A
0.295 A
0.15 A
0.15 A
0.25 A
0.125 A
0.125 A
0.295 A
0.15 A
0.15 A
Effective power loss
• At 24 V DC, typical
• At 48 V DC, typical
• With Power-over-Ethernet
according to IEEE802.3at for
Type 1 and IEEE802.3af, typical
7W
7W
7W
7W
7W
7W
7W
7W
7W
9W
9W
9W
Interfaceswireless
Supply voltage, current
consumption, power loss
Type of power supply
Power supply
• 1 from M12 power connector
(A-coded) for redundant
power supply
• 2 from M12 power connector
(A-coded) for redundant
power supply
• 1 from
IE hybrid cable 2x2 + 4x0.34
• 2 from
IE hybrid cable 2x2 + 4x0.34
• From Power-over-Ethernet
according to IEEE802.3at for
Type 1 and IEEE802.3af
8
Permissible ambient conditions
Ambient temperature
• During operation
• During storage
• During transport
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
Relative humidity at 25 °C without
condensation during operation,
maximum
100 %
100 %
100 %
100 %
IP degree of protection
IP65
IP65
IP65
IP65
Ambient conditions for operation
When used under
explosion protection
conditions (Zone 2),
the SCALANCE
W788-xPRO/RR or
W74x-1PRO/RR product
must be installed in an
enclosure that complies
at least with IP54
according to EN 60529
within the scope of
EN 50021.
When used under
explosion protection
conditions (Zone 2),
the SCALANCE
W788-xPRO/RR or
W74x-1PRO/RR product
must be installed in an
enclosure that complies
at least with IP54
according to EN 60529
within the scope of
EN 50021.
When used under
explosion protection
conditions (Zone 2),
the SCALANCE
W788-xPRO/RR or
W74x-1PRO/RR product
must be installed in an
enclosure that complies
at least with IP54
according to EN 60529
within the scope of
EN 50021.
When used under
explosion protection
conditions (Zone 2),
the SCALANCE
W788-xPRO/RR or
W74x-1PRO/RR product
must be installed in an
enclosure that complies
at least with IP54
according to EN 60529
within the scope of
EN 50021.
1)
Wireless approval in the USA
Siemens IK PI · 2012
8/73
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W788 for the indoor area
■ Technical specifications (continued)
Order No.
6GK5 788-1AA60-2AA0
6GK5 788-2AA60-2AA0
6GK5 788-1AA60-6AA0
6GK5 788-2AA60-6AA0
6GK5 788-1AA60-2AB01) 6GK5 788-2AA60-2AB01) 6GK5 788-1AA60-6AB01) 6GK5 788-2AA60-6AB01)
Product type designation
SCALANCE W788-1PRO
SCALANCE W788-2PRO
SCALANCE W788-1RR
SCALANCE W788-2RR
125 mm
125 mm
125 mm
125 mm
88 mm
88 mm
88 mm
Design, dimensions and weights
Width of enclosure without antenna
Height of enclosure without antenna 88 mm
Depth of enclosure without antenna
108 mm
108 mm
108 mm
108 mm
Net weight
1.05 kg
1.05 kg
1.05 kg
1.05 kg
Type of mounting
• S7-300 rail mounting
• Wall mounting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
2.41 … 2.48 GHz
2.41 … 2.48 GHz
2.41 … 2.48 GHz
2.41 … 2.48 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
Number of SSIDs
8
16
8
16
Product function
• Dual client
• iHOP
• iPCF
• iPCF-MC
No
No
No
No
No
No
No
No
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
0
0
1
1
8
8
8
8
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
No
No
Yes
No
No
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Wireless frequencies
Wireless frequency
• With WLAN in the 2.4 GHz
frequency band
• With WLAN in the 5 GHz frequency
band
Product properties,
functions, components
General
Number of iPCF-capable radio
modules
Product functions
Management, configuration,
programming
Number of manageable IP
addresses in the client
8
Product function
• CLI
• Web-based management
• MIB support
• TRAPs via e-mail
• Configuration with STEP 7
• Configuration with STEP 7 in the
TIA Portal
• SMTP server
• Operation with IWLAN controller
• Operation with Enterasys WLAN
controller
• iQoS
• Forced roaming with IWLAN
• WDS
Protocol is supported
• Address Resolution Protocol (ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
1)
Wireless approval in the USA
8/74
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W788 for the indoor area
■ Technical specifications (continued)
Order No.
6GK5 788-1AA60-2AA0
6GK5 788-2AA60-2AA0
6GK5 788-1AA60-6AA0
6GK5 788-2AA60-6AA0
6GK5 788-1AA60-2AB01) 6GK5 788-2AA60-2AB01) 6GK5 788-1AA60-6AB01) 6GK5 788-2AA60-6AB01)
Product type designation
SCALANCE W788-1PRO
SCALANCE W788-2PRO
SCALANCE W788-1RR
SCALANCE W788-2RR
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
FM 3611: Class I,
Division 2, Groups
A,B,C,D, T4 / Class 1,
Zone 2, Group IIC, T4
EN 60079-15:2005,
EN 60079-0:2006,
II 3 G Ex nA II T4 KEMA
07 ATEX 0145X
UL 60950-1 CSA C22.2
No. 60950-1
ISA 12.12.01-2000,
CSA C22.2
No. 213-M1987, CL. 1,
Div. 2, GP. A,B,C,D, T4 /
CL. 1, Zone 2, GP IIC, T4 /
CL. 1, Zone 2, AEx nC
IIC, T4
FM 3611: Class I,
Division 2, Groups
A,B,C,D, T4 / Class 1,
Zone 2, Group IIC, T4
EN 60079-15:2005,
EN 60079-0:2006,
II 3 G Ex nA II T4 KEMA
07 ATEX 0145X
UL 60950-1 CSA C22.2
No. 60950-1
ISA 12.12.01-2000,
CSA C22.2
No. 213-M1987, CL. 1,
Div. 2, GP. A,B,C,D, T4 /
CL. 1, Zone 2, GP IIC, T4 /
CL. 1, Zone 2, AEx nC
IIC, T4
FM 3611: Class I,
Division 2, Groups
A,B,C,D, T4 / Class 1,
Zone 2, Group IIC, T4
EN 60079-15:2005,
EN 60079-0:2006,
II 3 G Ex nA II T4 KEMA
07 ATEX 0145X
UL 60950-1 CSA C22.2
No. 60950-1
ISA 12.12.01-2000,
CSA C22.2
No. 213-M1987, CL. 1,
Div. 2, GP. A,B,C,D, T4 /
CL. 1, Zone 2, GP IIC, T4 /
CL. 1, Zone 2, AEx nC
IIC, T4
FM 3611: Class I,
Division 2, Groups
A,B,C,D, T4 / Class 1,
Zone 2, Group IIC, T4
EN 60079-15:2005,
EN 60079-0:2006,
II 3 G Ex nA II T4 KEMA
07 ATEX 0145X
UL 60950-1 CSA C22.2
No. 60950-1
ISA 12.12.01-2000,
CSA C22.2
No. 213-M1987, CL. 1,
Div. 2, GP. A,B,C,D, T4 /
CL. 1, Zone 2, GP IIC, T4 /
CL. 1, Zone 2, AEx nC
IIC, T4
Identification & maintenance
• I&M0 - device-specific information Yes
• I&M1 - higher-level designation/
Yes
location designation
Product functions Diagnostics
Product function
• PROFINET IO diagnostics
• Link check
• Connection monitoring IP-Alive
• Localization by means of
Aeroscout
• SysLog
Product functions VLAN
Product function VLAN with IWLAN
Product functions DHCP
Product function DHCP client
Product functions Redundancy
STP/RSTP protocol is supported
Product functions Security
Product function
• ACL - MAC based
• IEEE 802.1x (radius)
• NAT/NAPT
• Access protection according
to IEEE802.11i
• WPA/WPA2
• TKIP/AES
Protocol is supported SSH
Product functions Time
SNTP protocol is supported
Standards, specifications,
approvals
Standard
• for EMC of FM
• for hazardous zone
• for CSA and UL safety
• for hazardous zone of CSA
and UL
1)
Wireless approval in the USA
Siemens IK PI · 2012
8/75
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W788 for the indoor area
■ Technical specifications (continued)
Order No.
6GK5 788-1AA60-2AA0
6GK5 788-2AA60-2AA0
6GK5 788-1AA60-6AA0
6GK5 788-2AA60-6AA0
6GK5 788-1AA60-2AB01) 6GK5 788-2AA60-2AB01) 6GK5 788-1AA60-6AB01) 6GK5 788-2AA60-6AB01)
Product type designation
SCALANCE W788-1PRO
SCALANCE W788-2PRO
SCALANCE W788-1RR
SCALANCE W788-2RR
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
No
You can find the latest list
of countries at:
www.siemens.com/
simatic-net/ik-info
You can find the latest list
of countries at:
www.siemens.com/
simatic-net/ik-info
You can find the latest list
of countries at:
www.siemens.com/
simatic-net/ik-info
You can find the latest list
of countries at:
www.siemens.com/
simatic-net/ik-info
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
2 antennas,
hybrid connector
included in scope of
delivery
2 antennas,
hybrid connector
included in scope of
delivery
2 antennas,
hybrid connector
included in scope of
delivery
2 antennas,
hybrid connector
included in scope of
delivery
Certificate of suitability
• CE marking
• EC Declaration of Conformity
• C-Tick
• CCC
• Railroad application according to
EN 50155
• e1 approval
• E1 approval
• Power-over-Ethernet according to
IEEE802.3at for Type 1 and
IEEE802.3af
Standard for wireless
communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Wireless approval
Marine classification association
• American Bureau of Shipping
Europe Ltd. (ABS)
• Bureau Veritas (BV)
• Det Norske Veritas (DNV)
• Germanischer Lloyd (GL)
• Lloyds Register of Shipping (LRS)
• Nippon Kaiji Kyokai (NK)
• Polski Rejestr Statkow (PRS)
Accessories
8
Accessories
1)
Wireless approval in the USA
8/76
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W788 for the indoor area
■ Ordering data
Order No.
Order No.
SCALANCE W788 access points
Accessories
IWLAN access points with
built-in wireless interfaces;
wireless networks
IEEE 802.11a/b/g/h at 2.4/5 GHz
up to 54 Mbit/s; WPA2/AES;
Power over Ethernet (PoE),
IP65 degree of protection
(-20°C to +60°C);
scope of supply:
two ANT795-4MR antennas,
IP67 hybrid plug-in connector,
mounting hardware,
manual on CD-ROM,
German/English
C-PLUG
SCALANCE W788-1PRO
SIMATIC Mobile Panel 277F
IWLAN
• Communication via WLAN
(PROFINET)
with acknowledgement button
and emergency stop button
• Communication via WLAN
(PROFINET)
with acknowledgment button
and emergency stop button
with integrated handwheel,
key-operated switch, and two
illuminated pushbuttons
IWLAN Access Point with one
built-in radio interface
• National approvals for operation
outside the USA
• National approvals for operation
within the USA1)
6GK5 788-1AA60-2AA0
6GK5 788-1AA60-2AB0
6GK5 788-2AA60-2AA0
6GK5 788-2AA60-2AB0
SCALANCE W788-1RR
IWLAN Access Point with one
built-in radio interface for
establishment of radio links
with iPCF
• National approvals for operation
outside the USA
• National approvals for operation
within the USA1)
6GK5 788-1AA60-6AA0
6GK5 788-1AA60-6AB0
SCALANCE W788-2RR
IWLAN Dual Access Point with
two built-in radio interfaces for
establishment of radio links
with iPCF
• National approvals for operation
outside the USA
• National approvals for operation
within the USA1)
1)
6GK1 900-0AB00
PRESET-PLUG
6GK5 798-8AB00
Swap medium for simple initial
startup of SCALANCE W access
points and client modules,
as well as IWLAN/PB Link PN IO
SCALANCE W788-2PRO
IWLAN Dual Access Point with
two built-in radio interfaces
• National approvals for operation
outside the USA
• National approvals for operation
within the USA1)
Swap medium for simple
replacement of devices in the
event of a fault;
for storing configuration data;
can be used in SIMATIC NET
products with PLUG slot
Note:
Please also order the desktop
power supply or battery charger!
• Table-top power supply incl.
power cable for EU, US, UK, JP
(only suitable for operation
under laboratory/office conditions)
• Charger for safe storage and
charging the device incl. lock for
securing the device in the
charger. Charging capabilities
for up to two additional batteries
• Additional battery with LED
indicator for indicating the
charge status
• Transponder incl. batteries
(3x AA)
6AV6 645-0DB01-0AX0
6AV6 645-0DC01-0AX0
6AV6 671-5CN00-0AX1
6AV6 671-5CE00-0AX0
6AV6 671-5CL00-0AX0
6AV6 671-5CM00-0AX0
8
6GK5 788-2AA60-6AA0
6GK5 788-2AA60-6AB0
Please note national approvals at
www.siemens.com/wireless-approvals
Siemens IK PI · 2012
8/77
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W788 for the indoor area
■ Ordering data
Order No.
Accessories (continued)
IE FC RJ45 modular outlet
with power insert
6GK1 901-1BE00-0AA3
FastConnect RJ45 modular outlet
for Industrial Ethernet with a
replaceable insert for 1 x 24 V
and 1 x 100 Mbit/s interface
IE Hybrid Cable 2x2 + 4x0.34
RJ45 plug connector for
Industrial Ethernet with a rugged
metal enclosure and integrated
insulation-displacement contacts
for connecting Industrial Ethernet
FC installation cables;
with a 180° cable outlet;
for network components and
CPs/CPUs with Industrial Ethernet
interface
• 1 pack = 1 unit
• 1 pack = 10 units
• 1 pack = 50 units
6GK1 901-1BB10-2AA0
6GK1 901-1BB10-2AB0
6GK1 901-1BB10-2AE0
IE FC Standard Cable GP 2 x 2
6XV1 840-2AH10
6GK1 907-0DC10-6AA3
6GK5 791-1PS00-0AA6
AC/DC power supply, 10 W,
IP65 (-20 to +60 °C),
input: 90 V - 265 V AC, output:
24 V DC,
metal housing;
scope of supply:
AC power 3+PE cable connector,
DC power cord M12,
mounting hardware;
operating instructions
German/English
6ES7 194-1JB10-0XA0
Dust cap for RJ45 connection
socket (Industrial Ethernet/PoE)
of SCALANCE W700
Antennas and miscellaneous
IWLAN accessories
6GK1 901-1GA00
IE TP Cord RJ45/RJ45
6XV1 870-3QE50
6XV1 870-3QH10
6XV1 870-3QH20
6XV1 870-3QH60
6XV1 870-3QN10
■ More information
Wireless approvals:
Current approvals can be found on the Internet at:
www.siemens.com/wireless-approvals
To assist in selecting the right products for Industrial Wireless
Communication, the SIMATIC NET Selection Tool is available:
Online version:
www.siemens.com/snst
Offline version:
www.siemens.com/snst-download
Siemens IK PI · 2012
Power M12
Cable Connector PRO
IE Hybrid RJ45
Socket Dust Cover
Preadjusted stripping tool
for fast stripping of the
Industrial Ethernet FC cables
8/78
Order directly from:
HARTING Deutschland GmbH &
Co. KG
P.O. Box 24-51
32381 Minden, Germany
Phone: +49 (0)571-8896-0
Fax: +49 (0)571-8896-354
E-mail: [email protected]
Internet: www.HARTING.com
PS791-1PRO Power Supply
4-core, shielded TP installation
cable for connection to IE
FC Outlet RJ45/ IE FC RJ45 Plug;
PROFINET-compliant;
with UL approval;
sold by the meter;
max. length 1000 m,
minimum order 20 m
TP cable 4 x 2
with 2 RJ45 connectors
• 0.5 m
•1m
•2m
•6m
• 10 m
Connector for connecting
SCALANCE W700 to
Industrial Ethernet and
Power over Ethernet (PoE),
with assembly instructions, 1 unit
Terminal socket for connection of
SCALANCE W700 for 24 V DC
supply voltage; 4-pole, A-coded,
with assembly instructions,
3 units
IE FC RJ45 Plug 180 2x2
8
09 45 125 1300.00
6XV1 870-2J
4-wire, shielded installation cable;
sold by the meter;
up to 1000 m,
minimum order 20 m
IE FC Stripping Tool
Order No.
IP 67 hybrid connector
See Industrial Wireless LAN/
accessories
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W786 for the outdoor area
■ Overview
Infeed of 48 V DC or with
power supplies 100-240 V
AC or
12-24 V DC
Depending on variant:
- RJ45 connection
- Fiber-optic connection
(multimode)
Reset button
C-PLUG
slot
• Rugged plastic enclosure (plexi-glass type), shock and
vibration-proof for severe mechanical loading
• High IP65 degree of protection against dust and water jets
• For use at ambient temperatures from -40 °C to +70 °C
• Resistant to condensation
• Resistant to UV radiation and saltwater spray
• Up to 6 x R-SMA sockets for the connection of remote
antennas
• Version with 1 x RJ45 connection for 10/100 Mbit/s with
Power-over-Ethernet according to IEEE 802.3at Type 1
(corresponds to IEEE 802.3af)
• Version with 1 x BFOC connection for 10/100 Mbit/s
multimode FOC
• 1 x 48 V DC connection (also redundant power infeed),
optional operation on 12 … 24 V DC or 100 … 240 V AC with
power supply integrated into device
• 1 x C-PLUG slot
• Function LEDs for optical signaling of faults and operating
states
• Mounting: Wall or, with optional mounting set, on S7 mounting
rail, 35 mm standard mounting rail, or on a pole
*B,.B;;B
Dependent on variant:
internal antennas in this case
• Especially well suited to applications with high climatic
requirements when installed outdoors and in areas accessible
to the public
■ Design
Antenna
connections
depending
on variant
Design and interfaces of the SCALANCE W786 access points
Product versions
SCALANCE W786-1PRO
• A wireless card permanently installed in the device
• Versions with:
- RJ45 connection and two internal antennas
- RJ45 connection and two connections for external antennas
- Fiber-optic connection and two internal antennas
- Fiber-optic connection and two connections for external
antennas
SCALANCE W786-2PRO
• Two wireless cards permanently installed in the device
• Versions with:
- RJ45 connection and four internal antennas
- RJ45 connection and four connections for external antennas
- Fiber-optic connection and four internal antennas
- Fiber-optic connection and four connections for external
antennas
SCALANCE W786-3PRO
• Three wireless cards permanently installed in the device
• Versions with:
- RJ45 connection and six connections for external antennas
- Fiber-optic connection and six connections for external
antennas
SCALANCE W786-2RR
• Two wireless cards permanently installed in the device;
for establishing wireless connections with iPCF
• Versions with:
- RJ45 connection and four internal antennas
- RJ45 connection and four connections for external antennas
Siemens IK PI · 2012
8/79
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W786 for the outdoor area
■ Function
Where access points with three wireless modules
(e.g. W786-3PRO) are used, communication between the
access points is implemented with two modules each.
The wireless field for the station, e.g. an automated guided
vehicle, is established by the third wireless module. This means
that larger directional radio paths can be established and
communication with the stations is also possible.
,:/$1UDGLROLQN
$FFHVV3RLQW
6&$/$1&(
:55
$FFHVV3RLQW
6&$/$1&(
:55
0RELOH3DQHO),:/$1
&38
)
31'3
(IIHFWLYHUDQJH
(IIHFWLYHUDQJH
(IIHFWLYHUDQJH
7UDQVSRQGHU
7UDQVSRQGHU
7UDQVSRQGHU
6&$/$1&(
;
352),1(7
(7SUR
5RERWV
5RERWFHOO
(7SUR
5RERWV
Programming of robots in the safety-related environment
8
In this configuration three effective ranges are defined, in which
robots can be programmed using the Mobile Panel 277(F)
IWLAN (teaching). If a fault occurs during the programming,
e.g. on leaving the safety-related areas or in the case of
unforeseen incidents, the plant is brought to the safe state with
the aid of the integrated emergency-stop procedure using the
IWLAN structure implemented with SCALANCE W786-2RR.
The safety of the entire plant is achieved by means of PROFINET
with the PROFIsafe protocol which is implemented not only
on the PROFINET controller (CPU 317F-2 PN/DP), but also on
the PROFINET device (Mobile Panel 277(F) IWLAN). The
SCALANCE W786-2RR that has the iPCF mechanism ensures
that the response times necessary for the functional safety are
adhered to.
8/80
Siemens IK PI · 2012
5RERWFHOO
(7SUR
5RERWV
5RERWFHOO
*B,.B;;B
,QGXVWULDO(WKHUQHW
352),VDIH
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W786 for the outdoor area
■ Function (continued)
If the minimum length of standard Ethernet cables is insufficient
due to the large distance of the access points from the wired
network, SCALANCE W786 can also be used in a version with
BFOC connectors (multimode fiber-optic cable).
Electro-container
with Ethernet-Switch
Antenna
ANT792-8DN
Access Point
SCALANCE
W786-1PRO
Configured as
Ethernet Client Module
Antenna
ANT792-6MN
Access Point
SCALANCE W786-1PRO
configured as Access Point
Radio cell
*B,.B;;B
Antenna
ANT792-6MN
Use of the SCALANCE W786 product line in sectors subject to high climatic requirements
In the case of SCALANCE W786, this only concerns access
points which can, however, be configured as client modules
through Web-based management. Then, depending on the
selected version, a maximum of one wireless module will be
available as a client.
8
Siemens IK PI · 2012
8/81
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W786 for the outdoor area
■ Technical specifications
Order No.
6GK5 786-1BA60-2AA0
6GK5 786-1AA60-2AA0
6GK5 786-1BB60-2AA0
6GK5 786-1AB60-2AA0
6GK5 786-1BA60-2AB01) 6GK5 786-1AA60-2AB01) 6GK5 786-1BB60-2AB01) 6GK5 786-1AB60-2AB01)
Product type designation
SCALANCE W786-1PRO
SCALANCE W786-1PRO
SCALANCE W786-1PRO
SCALANCE W786-1PRO
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous
use of several radio
channels, a transmission
rate of 108 Mbit/s is
possible (turbo mode)
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous
use of several radio
channels, a transmission
rate of 108 Mbit/s is
possible (turbo mode)
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous
use of several radio
channels, a transmission
rate of 108 Mbit/s is
possible (turbo mode)
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous
use of several radio
channels, a transmission
rate of 108 Mbit/s is
possible (turbo mode)
1
1
-
-
1
1
1
1
1
1
1
1
RJ45 socket
RJ45 socket
-
-
2-pin connector
(48 V DC) or optionally
available power supply
adapter
(4-pin 12 to 24 V DC or
3-pin 100 to 240 V AC)
2-pin connector
(48 V DC) or optionally
available power supply
adapter
(4-pin 12 to 24 V DC or
3-pin 100 to 240 V AC)
2-pin connector
(48 V DC) or optionally
available power supply
adapter
(4-pin 12 to 24 V DC or
3-pin 100 to 240 V AC)
2-pin connector
(48 V DC) or optionally
available power supply
adapter
(4-pin 12 to 24 V DC or
3-pin 100 to 240 V AC)
Number of optical connections for
fiber-optic cables at 100 Mbit/s
-
-
1
1
Design of optical connection for
fiber-optic cables at 100 Mbit/s
-
-
Duplex multimode FOC
(ST)
Duplex multimode FOC
(ST)
Design of swap medium C-Plug
Yes
Yes
Yes
Yes
Number of permanently installed
wireless cards
1
1
1
1
Number of internal antennas
2
-
2
-
Number of electrical connections
for external antenna(s)
-
2
-
2
Design of electrical connection for
external antenna(s)
-
R-SMA female (socket)
-
R-SMA female (socket)
DC
DC
DC
DC
48 V
48 V
48 V
48 V
48 V
48 V
48 V
48 V
100 … 240 V
12 … 24 V
100 … 240 V
12 … 24 V
100 … 240 V
12 … 24 V
100 … 240 V
12 … 24 V
Data transfer rate
Data transfer rate
• with W-LAN, maximum
• with Industrial Ethernet
• Note
Interfaces
Number of electrical connections
• for network components or
terminal equipment
• for power supply
• For redundant power supply
Design of electrical connection
• for network components or
terminal equipment
• for power supply
Interfaces wireless
8
Supply voltage,
current consumption, power loss
Type of supply voltage
Supply voltage
• 1 from terminal block
• 2 from terminal block
• From Power-over-Ethernet
according to IEEE802.3at for
Type 1 and IEEE802.3af
• From optionally integrated
power supply
- With AC
- With DC
1)
Wireless approval in the USA
8/82
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W786 for the outdoor area
■ Technical specifications (continued)
Order No.
6GK5 786-1BA60-2AA0
6GK5 786-1AA60-2AA0
6GK5 786-1BB60-2AA0
6GK5 786-1AB60-2AA0
6GK5 786-1BA60-2AB01) 6GK5 786-1AA60-2AB01) 6GK5 786-1BB60-2AB01) 6GK5 786-1AB60-2AB01)
Product type designation
SCALANCE W786-1PRO
SCALANCE W786-1PRO
SCALANCE W786-1PRO
SCALANCE W786-1PRO
Current consumed
• At 24 V DC, typical
• At 48 V DC, typical
• At 230 V AC, typical
• With Power-over-Ethernet
according to IEEE802.3at for
Type 1 and IEEE802.3af, typical
0.28 A
0.14 A
0.03 A
0.14 A
0.28 A
0.14 A
0.03 A
0.14 A
0.34 A
0.17 A
0.04 A
0.34 A
0.34 A
0.17 A
0.04 A
0.34 A
Effective power loss
• At 24 V DC, typical
• At 48 V DC, typical
• At 230 V AC, typical
• With Power-over-Ethernet
according to IEEE802.3at for
Type 1 and IEEE802.3af, typical
6.5 W
6.5 W
6.5 W
6.5 W
6.5 W
6.5 W
6.5 W
6.5 W
8W
8W
8W
8W
8W
8W
8W
8W
-40 … +70 °C
-40 … +85 °C
-40 … +85 °C
-40 … +70 °C
-40 … +85 °C
-40 … +85 °C
-40 … +70 °C
-40 … +85 °C
-40 … +85 °C
-40 … +70 °C
-40 … +85 °C
-40 … +85 °C
Relative humidity at 25 °C without
condensation during operation,
maximum
100 %
100 %
100 %
100 %
IP degree of protection
IP65
IP65
IP65
IP65
Ambient conditions for operation
When using the
100 … 240 V AC power
supply, an operating
temperature of -40 °C to
+60 °C is permissible
When using the
100 … 240 V AC power
supply, an operating
temperature of -40 °C to
+60 °C is permissible
When using the
100 … 240 V AC power
supply, an operating
temperature of -40 °C to
+60 °C is permissible
When using the
100 … 240 V AC power
supply, an operating
temperature of -40 °C to
+60 °C is permissible
Permissible ambient conditions
Ambient temperature
• During operation
• During storage
• During transport
Design, dimensions and weights
Width of enclosure without antenna
251 mm
251 mm
251 mm
251 mm
Height of enclosure without antenna 251 mm
251 mm
251 mm
251 mm
Depth of enclosure without antenna
72 mm
72 mm
72 mm
72 mm
Net weight
2.24 kg
2.24 kg
2.24 kg
2.24 kg
Type of mounting
• S7-300 rail mounting
• Wall mounting
Yes
Yes
Yes
Yes
For mast mounting,
35 mm DIN rail mounting
and S7-300 rail mounting,
an additional retaining
plate is required
For mast mounting,
35 mm DIN rail mounting
and S7-300 rail mounting,
an additional retaining
plate is required
For mast mounting,
35 mm DIN rail mounting
and S7-300 rail mounting,
an additional retaining
plate is required
For mast mounting,
35 mm DIN rail mounting
and S7-300 rail mounting,
an additional retaining
plate is required
2.41 … 2.48 GHz
2.41 … 2.48 GHz
2.41 … 2.48 GHz
2.41 … 2.48 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
Number of SSIDs
8
8
8
8
Product function
• Dual client
• iHOP
• iPCF
• iPCF-MC
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
0
0
0
0
Type of mounting
8
Wireless frequencies
Wireless frequency
• With WLAN in the 2.4 GHz
frequency band
• with WLAN in the 5 GHz
frequency band
Product properties,
functions, components
General
Number of iPCF-capable
radio modules
1)
Wireless approval in the USA
Siemens IK PI · 2012
8/83
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W786 for the outdoor area
■ Technical specifications (continued)
Order No.
6GK5 786-1BA60-2AA0
6GK5 786-1AA60-2AA0
6GK5 786-1BB60-2AA0
6GK5 786-1AB60-2AA0
6GK5 786-1BA60-2AB01) 6GK5 786-1AA60-2AB01) 6GK5 786-1BB60-2AB01) 6GK5 786-1AB60-2AB01)
Product type designation
SCALANCE W786-1PRO
SCALANCE W786-1PRO
SCALANCE W786-1PRO
SCALANCE W786-1PRO
8
8
8
8
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
No
No
Yes
No
No
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Product functions
Management, configuration,
programming
Number of manageable IP
addresses in the client
Product function
• CLI
• Web-based management
• MIB support
• TRAPs via e-mail
• Configuration with STEP 7
• Configuration with STEP 7 in the
TIA Portal
• SMTP server
• Operation with IWLAN controller
• Operation with Enterasys WLAN
controller
• iQoS
• Forced roaming with IWLAN
• WDS
Protocol is supported
• Address Resolution Protocol (ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
8
Identification & maintenance
• I&M0 - device-specific
information
• I&M1 - higher-level designation/
location designation
Product functions Diagnostics
Product function
• PROFINET IO diagnostics
• Link check
• Connection monitoring IP-Alive
• Localization by means of
Aeroscout
• SysLog
Product functions VLAN
Product function VLAN with IWLAN
Product functions DHCP
Product function DHCP client
Product functions Redundancy
STP/RSTP protocol is supported
1)
Wireless approval in the USA
8/84
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W786 for the outdoor area
■ Technical specifications (continued)
Order No.
6GK5 786-1BA60-2AA0
6GK5 786-1AA60-2AA0
6GK5 786-1BB60-2AA0
6GK5 786-1AB60-2AA0
6GK5 786-1BA60-2AB01) 6GK5 786-1AA60-2AB01) 6GK5 786-1BB60-2AB01) 6GK5 786-1AB60-2AB01)
Product type designation
SCALANCE W786-1PRO
SCALANCE W786-1PRO
SCALANCE W786-1PRO
SCALANCE W786-1PRO
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
FM 3611: Class I,
Division 2, Groups
A,B,C,D, T4 / Class 1,
Zone 2, Group IIC, T4
EN 60079-15:2005,
EN 60079-0:2006, II 3 G
Ex nA II T4 KEMA 07
ATEX 0145X
UL 60950-1 CSA C22.2
No. 60950-1
UL 1604, CSA C22.2
No. 213-M1987, CL. 1,
Div. 2, GP. A,B,C,D, T4 /
CL. 1, Zone 2, GP IIC, T4
FM 3611: Class I,
Division 2, Groups
A,B,C,D, T4 / Class 1,
Zone 2, Group IIC, T4
EN 60079-15:2005,
EN 60079-0:2006, II 3 G
Ex nA II T4 KEMA 07
ATEX 0145X
UL 60950-1 CSA C22.2
No. 60950-1
UL 1604, CSA C22.2
No. 213-M1987, CL. 1,
Div. 2, GP. A,B,C,D, T4 /
CL. 1, Zone 2, GP IIC, T4
FM 3611: Class I,
Division 2, Groups
A,B,C,D, T4 / Class 1,
Zone 2, Group IIC, T4
EN 60079-15:2005,
EN 60079-0:2006, II 3 G
Ex nA II T4 KEMA 07
ATEX 0145X
UL 60950-1 CSA C22.2
No. 60950-1
UL 1604, CSA C22.2
No. 213-M1987, CL. 1,
Div. 2, GP. A,B,C,D, T4 /
CL. 1, Zone 2, GP IIC, T4
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
No
You can find the latest list
of countries at:
www.siemens.com/
simatic-net/ik-info
You can find the latest list
of countries at:
www.siemens.com/
simatic-net/ik-info
You can find the latest list
of countries at:
www.siemens.com/
simatic-net/ik-info
You can find the latest list
of countries at:
www.siemens.com/
simatic-net/ik-info
Product functions Security
Product function
• ACL - MAC based
• IEEE 802.1x (radius)
• NAT/NAPT
• Access protection
according to IEEE802.11i
• WPA/WPA2
• TKIP/AES
Protocol is supported SSH
Product functions Time
SNTP protocol is supported
Standards, specifications,
approvals
Standard
• for EMC of FM
FM 3611: Class I,
Division 2, Groups
A,B,C,D, T4 / Class 1,
Zone 2, Group IIC, T4
• for hazardous zone
EN 60079-15:2005,
EN 60079-0:2006, II 3 G
Ex nA II T4 KEMA 07
ATEX 0145X
• for CSA and UL safety
UL 60950-1 CSA C22.2
No. 60950-1
• for hazardous zone of CSA and UL UL 1604, CSA C22.2
No. 213-M1987, CL. 1,
Div. 2, GP. A,B,C,D, T4 /
CL. 1, Zone 2, GP IIC, T4
Certificate of suitability
• CE marking
• EC Declaration of Conformity
• C-Tick
• CCC
• Railroad application
according to EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet according to
IEEE802.3at for Type 1 and
IEEE802.3af
Standard for wireless
communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Wireless approval
1)
8
Wireless approval in the USA
Siemens IK PI · 2012
8/85
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W786 for the outdoor area
■ Technical specifications (continued)
Order No.
6GK5 786-1BA60-2AA0
6GK5 786-1AA60-2AA0
6GK5 786-1BB60-2AA0
6GK5 786-1AB60-2AA0
6GK5 786-1BA60-2AB01) 6GK5 786-1AA60-2AB01) 6GK5 786-1BB60-2AB01) 6GK5 786-1AB60-2AB01)
Product type designation
SCALANCE W786-1PRO
SCALANCE W786-1PRO
SCALANCE W786-1PRO
SCALANCE W786-1PRO
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
No
Yes
Yes
Yes
No
Yes
No
Yes
Yes
Yes
No
Yes
No
Yes
Yes
Yes
No
48 V DC screw terminal
included in scope of
delivery
48 V DC screw terminal
included in scope of
delivery
48 V DC screw terminal
included in scope of
delivery
48 V DC screw terminal
included in scope of
delivery
Marine classification association
• American Bureau of Shipping
Europe Ltd. (ABS)
• Bureau Veritas (BV)
• Det Norske Veritas (DNV)
• Germanischer Lloyd (GL)
• Lloyds Register of Shipping (LRS)
• Nippon Kaiji Kyokai (NK)
• Polski Rejestr Statkow (PRS)
Accessories
Accessories
1)
Wireless approval in the USA
Order No.
6GK5 786-2BA60-2AA0
6GK5 786-2AA60-2AA0
6GK5 786-2BB60-2AA0
6GK5 786-2AB60-2AA0
6GK5 786-2BA60-2AB01) 6GK5 786-2AA60-2AB01) 6GK5 786-2BB60-2AB01) 6GK5 786-2AB60-2AB01)
Product type designation
SCALANCE W786-2PRO
SCALANCE W786-2PRO
SCALANCE W786-2PRO
SCALANCE W786-2PRO
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous
use of several radio
channels, a transmission
rate of 108 Mbit/s is
possible (turbo mode)
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous
use of several radio
channels, a transmission
rate of 108 Mbit/s is
possible (turbo mode)
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous
use of several radio
channels, a transmission
rate of 108 Mbit/s is
possible (turbo mode)
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous
use of several radio
channels, a transmission
rate of 108 Mbit/s is
possible (turbo mode)
1
1
-
-
1
1
1
1
1
1
1
1
RJ45 socket
RJ45 socket
-
-
2-pin connector
(48 V DC) or optionally
available power supply
adapter
(4-pin 12 to 24 V DC or
3-pin 100 to 240 V AC)
2-pin connector
(48 V DC) or optionally
available power supply
adapter
(4-pin 12 to 24 V DC or
3-pin 100 to 240 V AC)
2-pin connector
(48 V DC) or optionally
available power supply
adapter
(4-pin 12 to 24 V DC or
3-pin 100 to 240 V AC)
2-pin connector
(48 V DC) or optionally
available power supply
adapter
(4-pin 12 to 24 V DC or
3-pin 100 to 240 V AC)
Number of optical connections for
fiber-optic cables at 100 Mbit/s
-
-
1
1
Design of optical connection for
fiber-optic cables at 100 Mbit/s
-
-
Duplex multimode FOC
(ST)
Duplex multimode FOC
(ST)
Design of swap medium
C-Plug
Yes
Yes
Yes
Yes
Data transfer rate
Data transfer rate
• with W-LAN, maximum
• with Industrial Ethernet
• Note
Interfaces
Number of electrical connections
• for network components or
terminal equipment
• for power supply
• for redundant power supply
8
Design of electrical connection
• for network components or
terminal equipment
• for power supply
1)
Wireless approval in the USA
8/86
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W786 for the outdoor area
■ Technical specifications (continued)
Order No.
6GK5 786-2BA60-2AA0
6GK5 786-2AA60-2AA0
6GK5 786-2BB60-2AA0
6GK5 786-2AB60-2AA0
6GK5 786-2BA60-2AB01) 6GK5 786-2AA60-2AB01) 6GK5 786-2BB60-2AB01) 6GK5 786-2AB60-2AB01)
Product type designation
SCALANCE W786-2PRO
SCALANCE W786-2PRO
SCALANCE W786-2PRO
SCALANCE W786-2PRO
Number of permanently installed
wireless cards
2
2
2
2
Number of internal antennas
4
-
4
-
Number of electrical connections
for external antenna(s)
-
4
-
4
Design of electrical connection for
external antenna(s)
-
R-SMA female (socket)
-
R-SMA female (socket)
DC
DC
DC
DC
48 V
48 V
48 V
48 V
48 V
48 V
48 V
48 V
100 … 240 V
12 … 24 V
100 … 240 V
12 … 24 V
100 … 240 V
12 … 24 V
100 … 240 V
12 … 24 V
Current consumed
• At 24 V DC, typical
• At 48 V DC, typical
• At 230 V AC, typical
• With Power-over-Ethernet
according to IEEE802.3at for
Type 1 and IEEE802.3af, typical
0.34 A
0.17 A
0.04 A
0.34 A
0.34 A
0.17 A
0.04 A
0.34 A
0.4 A
0.2 A
0.05 A
0.2 A
0.4 A
0.2 A
0.05 A
0.2 A
Effective power loss
• At 24 V DC, typical
• At 48 V DC, typical
• At 230 V AC, typical
• With Power-over-Ethernet
according to IEEE802.3at for
Type 1 and IEEE802.3af, typical
8W
8W
8W
8W
8W
8W
8W
8W
9.5 W
9.5 W
9.5 W
9.5 W
9.5 W
9.5 W
9.5 W
9.5 W
Interfaces wireless
Supply voltage,
current consumption, power loss
Type of supply voltage
Supply voltage
• 1 from terminal block
• 2 from terminal block
• From Power-over-Ethernet
according to IEEE802.3at for
Type 1 and IEEE802.3af
• From optionally integrated
power supply
- With AC
- With DC
8
Permissible ambient
conditions
Ambient temperature
• During operation
• During storage
• During transport
-40 … +70 °C
-40 … +85 °C
-40 … +85 °C
-40 … +70 °C
-40 … +85 °C
-40 … +85 °C
-40 … +70 °C
-40 … +85 °C
-40 … +85 °C
-40 … +70 °C
-40 … +85 °C
-40 … +85 °C
Relative humidity at 25 °C without
condensation during operation,
maximum
100 %
100 %
100 %
100 %
IP degree of protection
IP65
IP65
IP65
IP65
Ambient conditions for operation
When using the
100 … 240 V AC
power supply,
an operating temperature
of -40 °C to +60 °C
is permissible
When using the
100 … 240 V AC
power supply,
an operating temperature
of -40 °C to +60 °C
is permissible
When using the
100 … 240 V AC
power supply,
an operating temperature
of -40 °C to +60 °C
is permissible
When using the
100 … 240 V AC
power supply,
an operating temperature
of -40 °C to +60 °C
is permissible
1)
Wireless approval in the USA
Siemens IK PI · 2012
8/87
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W786 for the outdoor area
■ Technical specifications (continued)
Order No.
6GK5 786-2BA60-2AA0
6GK5 786-2AA60-2AA0
6GK5 786-2BB60-2AA0
6GK5 786-2AB60-2AA0
6GK5 786-2BA60-2AB01) 6GK5 786-2AA60-2AB01) 6GK5 786-2BB60-2AB01) 6GK5 786-2AB60-2AB01)
Product type designation
SCALANCE W786-2PRO
SCALANCE W786-2PRO
SCALANCE W786-2PRO
SCALANCE W786-2PRO
Design, dimensions and weights
Width of enclosure without antenna
251 mm
251 mm
251 mm
251 mm
Height of enclosure without antenna 251 mm
251 mm
251 mm
251 mm
Depth of enclosure without antenna
72 mm
72 mm
72 mm
72 mm
Net weight
2.24 kg
2.24 kg
2.24 kg
2.24 kg
Type of mounting
• S7-300 rail mounting
• Wall mounting
Yes
Yes
Yes
Yes
For mast mounting,
35 mm DIN rail mounting
and S7-300 rail mounting,
an additional retaining
plate is required
For mast mounting,
35 mm DIN rail mounting
and S7-300 rail mounting,
an additional retaining
plate is required
For mast mounting,
35 mm DIN rail mounting
and S7-300 rail mounting,
an additional retaining
plate is required
For mast mounting,
35 mm DIN rail mounting
and S7-300 rail mounting,
an additional retaining
plate is required
2.41 … 2.48 GHz
2.41 … 2.48 GHz
2.41 … 2.48 GHz
2.41 … 2.48 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
Number of SSIDs
16
16
16
16
Product function
• Dual client
• iHOP
• iPCF
• iPCF-MC
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
0
0
0
0
8
8
8
8
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
No
No
Yes
No
No
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Type of mounting
Wireless frequencies
Wireless frequency
• With WLAN in the 2.4 GHz
frequency band
• with WLAN in the 5 GHz
frequency band
Product properties,
functions, components
General
Number of iPCF-capable
radio modules
Product functions
Management, configuration,
programming
8
Number of manageable
IP addresses in the client
Product function
• CLI
• Web-based management
• MIB support
• TRAPs via e-mail
• Configuration with STEP 7
• Configuration with STEP 7 in the
TIA Portal
• SMTP server
• Operation with IWLAN controller
• Operation with Enterasys WLAN
controller
• iQoS
• Forced roaming with IWLAN
• WDS
1)
Wireless approval in the USA
8/88
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W786 for the outdoor area
■ Technical specifications (continued)
Order No.
6GK5 786-2BA60-2AA0
6GK5 786-2AA60-2AA0
6GK5 786-2BB60-2AA0
6GK5 786-2AB60-2AA0
6GK5 786-2BA60-2AB01) 6GK5 786-2AA60-2AB01) 6GK5 786-2BB60-2AB01) 6GK5 786-2AB60-2AB01)
Product type designation
SCALANCE W786-2PRO
SCALANCE W786-2PRO
SCALANCE W786-2PRO
SCALANCE W786-2PRO
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Protocol is supported
• Address Resolution Protocol
(ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
Identification & maintenance
• I&M0 - device-specific
information
• I&M1 - higher-level designation/
location designation
Product functions Diagnostics
Product function
• PROFINET IO diagnostics
• Link check
• Connection monitoring IP-Alive
• Localization by means of
Aeroscout
• SysLog
Product functionsVLAN
Product function VLAN with IWLAN
Product functions DHCP
Product function DHCP client
Product functions Redundancy
STP/RSTP protocol is supported
Product functions Security
Product function
• ACL - MAC based
• IEEE 802.1x (radius)
• NAT/NAPT
• Access protection
according to IEEE802.11i
• WPA/WPA2
• TKIP/AES
Protocol is supported SSH
8
Product functions Time
SNTP protocol is supported
1)
Wireless approval in the USA
Siemens IK PI · 2012
8/89
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W786 for the outdoor area
■ Technical specifications (continued)
Order No.
6GK5 786-2BA60-2AA0
6GK5 786-2AA60-2AA0
6GK5 786-2BB60-2AA0
6GK5 786-2AB60-2AA0
6GK5 786-2BA60-2AB01) 6GK5 786-2AA60-2AB01) 6GK5 786-2BB60-2AB01) 6GK5 786-2AB60-2AB01)
Product type designation
SCALANCE W786-2PRO
SCALANCE W786-2PRO
SCALANCE W786-2PRO
SCALANCE W786-2PRO
FM 3611:
Class I, Division 2,
Groups A,B,C,D,
T4 / Class 1, Zone 2,
Group IIC, T4
EN 60079-15:2005,
EN 60079-0:2006, II 3 G
Ex nA II T4 KEMA 07
ATEX 0145X
UL 60950-1 CSA C22.2
No. 60950-1
UL 1604, CSA C22.2
No. 213-M1987, CL. 1,
Div. 2, GP. A,B,C,D, T4 /
CL. 1, Zone 2, GP IIC, T4
FM 3611:
Class I, Division 2,
Groups A,B,C,D,
T4 / Class 1, Zone 2,
Group IIC, T4
EN 60079-15:2005,
EN 60079-0:2006, II 3 G
Ex nA II T4 KEMA 07
ATEX 0145X
UL 60950-1 CSA C22.2
No. 60950-1
UL 1604, CSA C22.2
No. 213-M1987, CL. 1,
Div. 2, GP. A,B,C,D, T4 /
CL. 1, Zone 2, GP IIC, T4
FM 3611:
Class I, Division 2,
Groups A,B,C,D,
T4 / Class 1, Zone 2,
Group IIC, T4
EN 60079-15:2005,
EN 60079-0:2006, II 3 G
Ex nA II T4 KEMA 07
ATEX 0145X
UL 60950-1 CSA C22.2
No. 60950-1
UL 1604, CSA C22.2
No. 213-M1987, CL. 1,
Div. 2, GP. A,B,C,D, T4 /
CL. 1, Zone 2, GP IIC, T4
FM 3611:
Class I, Division 2,
Groups A,B,C,D,
T4 / Class 1, Zone 2,
Group IIC, T4
EN 60079-15:2005,
EN 60079-0:2006, II 3 G
Ex nA II T4 KEMA 07
ATEX 0145X
UL 60950-1 CSA C22.2
No. 60950-1
UL 1604, CSA C22.2
No. 213-M1987, CL. 1,
Div. 2, GP. A,B,C,D, T4 /
CL. 1, Zone 2, GP IIC, T4
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
No
You can find the
latest list of countries at:
www.siemens.com/
simatic-net/ik-info
You can find the
latest list of countries at:
www.siemens.com/
simatic-net/ik-info
You can find the
latest list of countries at:
www.siemens.com/
simatic-net/ik-info
You can find the
latest list of countries at:
www.siemens.com/
simatic-net/ik-info
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
No
Yes
Yes
Yes
No
Yes
No
Yes
Yes
Yes
No
Yes
No
Yes
Yes
Yes
No
48 V DC screw terminal
included in scope of
delivery
48 V DC screw terminal
included in scope of
delivery
48 V DC screw terminal
included in scope of
delivery
48 V DC screw terminal
included in scope of
delivery
Standards, specifications,
approvals
Standard
• for EMC of FM
• for hazardous zone
• for CSA and UL safety
• for hazardous zone of CSA
and UL
Certificate of suitability
• CE marking
• EC Declaration of Conformity
• C-Tick
• CCC
• Railroad application
according to EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet
according to IEEE802.3at for
Type 1 and IEEE802.3af
8
Standard for wireless
communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Wireless approval
Marine classification association
• American Bureau of Shipping
Europe Ltd. (ABS)
• Bureau Veritas (BV)
• Det Norske Veritas (DNV)
• Germanischer Lloyd (GL)
• Lloyds Register of Shipping (LRS)
• Nippon Kaiji Kyokai (NK)
• Polski Rejestr Statkow (PRS)
Accessories
Accessories
1)
Wireless approval in the USA
8/90
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W786 for the outdoor area
■ Technical specifications (continued)
Order No.
6GK5 786-3AA60-2AA0
6GK5 786-3AB60-2AA0
6GK5 786-2BA60-6AA0
6GK5 786-2AA60-6AA0
6GK5 786-3AA60-2AB01) 6GK5 786-3AB60-2AB01) 6GK5 786-2BA60-6AB01) 6GK5 786-2AA60-6AB01)
Product type designation
SCALANCE W786-3PRO
SCALANCE W786-3PRO
SCALANCE W786-2RR
SCALANCE W786-2RR
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous
use of several radio
channels, a transmission
rate of 108 Mbit/s is
possible (turbo mode)
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous
use of several radio
channels, a transmission
rate of 108 Mbit/s is
possible (turbo mode)
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous
use of several radio
channels, a transmission
rate of 108 Mbit/s is
possible (turbo mode)
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous
use of several radio
channels, a transmission
rate of 108 Mbit/s is
possible (turbo mode)
1
-
1
1
1
1
1
1
1
1
1
1
RJ45 socket
-
RJ45 socket
RJ45 socket
2-pin connector
(48 V DC) or optionally
available power supply
adapter
(4-pin 12 to 24 V DC or
3-pin 100 to 240 V AC)
2-pin connector
(48 V DC) or optionally
available power supply
adapter
(4-pin 12 to 24 V DC or
3-pin 100 to 240 V AC)
2-pin connector
(48 V DC) or optionally
available power supply
adapter
(4-pin 12 to 24 V DC or
3-pin 100 to 240 V AC)
2-pin connector
(48 V DC) or optionally
available power supply
adapter
(4-pin 12 to 24 V DC or
3-pin 100 to 240 V AC)
Number of optical connections for
fiber-optic cables at 100 Mbit/s
-
1
-
-
Design of optical connection for
fiber-optic cables at 100 Mbit/s
-
Duplex multimode FOC
(ST)
-
-
Design of swap medium
C-Plug
Yes
Yes
Yes
Yes
Number of permanently installed
wireless cards
3
3
2
2
Number of internal antennas
-
-
4
-
Number of electrical connections
for external antenna(s)
6
6
-
4
Design of electrical connection for
external antenna(s)
R-SMA female (socket)
R-SMA female (socket)
-
R-SMA female (socket)
DC
DC
DC
DC
48 V
48 V
48 V
48 V
48 V
48 V
48 V
48 V
100 … 240 V
12 … 24 V
100 … 240 V
12 … 24 V
100 … 240 V
12 … 24 V
100 … 240 V
12 … 24 V
Transmission rate
Transmission rate
• with W-LAN, maximum
• with Industrial Ethernet
• Note
Interfaces
Number of electrical connections
• for network components or
terminal equipment
• for power supply
• for redundant power supply
Design of electrical connection
• for network components or
terminal equipment
• for power supply
Interfaceswireless
Supply voltage,
current consumption, power loss
Type of power supply
Supply voltage
• 1 from terminal block
• 2 from terminal block
• From Power-over-Ethernet
according to IEEE802.3at
for Type 1 and IEEE802.3af
• From optionally integrated
power supply
- With AC
- With DC
1)
Wireless approval in the USA
Siemens IK PI · 2012
8/91
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W786 for the outdoor area
■ Technical specifications (continued)
Order No.
6GK5 786-3AA60-2AA0
6GK5 786-3AB60-2AA0
6GK5 786-2BA60-6AA0
6GK5 786-2AA60-6AA0
6GK5 786-3AA60-2AB01) 6GK5 786-3AB60-2AB01) 6GK5 786-2BA60-6AB01) 6GK5 786-2AA60-6AB01)
Product type designation
SCALANCE W786-3PRO
SCALANCE W786-3PRO
SCALANCE W786-2RR
SCALANCE W786-2RR
Current consumed
• At 24 V DC, typical
• At 48 V DC, typical
• At 230 V AC, typical
• With Power-over-Ethernet
according to IEEE802.3at for
Type 1 and IEEE802.3af, typical
0.4 A
0.2 A
0.05 A
0.2 A
0.46 A
0.23 A
0.05 A
0.23 A
0.34 A
0.17 A
0.04 A
0.34 A
0.34 A
0.17 A
0.04 A
0.34 A
Effective power loss
• At 24 V DC, typical
• At 48 V DC, typical
• At 230 V AC, typical
• With Power-over-Ethernet
according to IEEE802.3at for
Type 1 and IEEE802.3af, typical
9.5 W
9.5 W
9.5 W
9.5 W
11 W
11 W
11 W
11 W
8W
8W
8W
8W
8W
8W
8W
8W
-40 … +70 °C
-40 … +85 °C
-40 … +85 °C
-40 … +70 °C
-40 … +85 °C
-40 … +85 °C
-40 … +70 °C
-40 … +85 °C
-40 … +85 °C
-40 … +70 °C
-40 … +85 °C
-40 … +85 °C
Relative humidity at 25 °C without
condensation during operation,
maximum
100 %
100 %
100 %
100 %
IP degree of protection
IP65
IP65
IP65
IP65
Ambient conditions for operation
When using the
100 … 240 V AC power
supply, an operating
temperature of -40 °C to
+60 °C is permissible
When using the
100 … 240 V AC power
supply, an operating
temperature of -40 °C to
+60 °C is permissible
When using the
100 … 240 V AC power
supply, an operating
temperature of -40 °C to
+60 °C is permissible
When using the
100 … 240 V AC power
supply, an operating
temperature of -40 °C to
+60 °C is permissible
Permissible ambient
conditions
Ambient temperature
• During operation
• During storage
• During transport
Design, dimensions and weights
Width of enclosure without antenna
8
251 mm
251 mm
251 mm
251 mm
Height of enclosure without antenna 251 mm
251 mm
251 mm
251 mm
Depth of enclosure without antenna
72 mm
72 mm
72 mm
72 mm
Net weight
2.24 kg
2.24 kg
2.24 kg
2.24 kg
Type of mounting
• S7-300 rail mounting
• Wall mounting
Yes
Yes
Yes
Yes
For mast mounting,
35 mm DIN rail mounting
and S7-300 rail mounting,
an additional retaining
plate is required
For mast mounting,
35 mm DIN rail mounting
and S7-300 rail mounting,
an additional retaining
plate is required
For mast mounting,
35 mm DIN rail mounting
and S7-300 rail mounting,
an additional retaining
plate is required
For mast mounting,
35 mm DIN rail mounting
and S7-300 rail mounting,
an additional retaining
plate is required
2.41 … 2.48 GHz
2.41 … 2.48 GHz
2.41 … 2.48 GHz
2.41 … 2.48 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
Type of mounting
Wireless frequencies
Wireless frequency
• With WLAN in the 2.4 GHz
frequency band
• with WLAN in the 5 GHz frequency
band
1)
Wireless approval in the USA
8/92
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W786 for the outdoor area
■ Technical specifications (continued)
Order No.
6GK5 786-3AA60-2AA0
6GK5 786-3AB60-2AA0
6GK5 786-2BA60-6AA0
6GK5 786-2AA60-6AA0
6GK5 786-3AA60-2AB01) 6GK5 786-3AB60-2AB01) 6GK5 786-2BA60-6AB01) 6GK5 786-2AA60-6AB01)
Product type designation
SCALANCE W786-3PRO
SCALANCE W786-3PRO
SCALANCE W786-2RR
SCALANCE W786-2RR
Number of SSIDs
24
24
16
16
Product function
• Dual client
• iHOP
• iPCF
• iPCF-MC
No
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
0
0
1
1
8
8
8
8
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
No
No
Yes
No
No
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Product properties,
functions, components
General
Number of iPCF-capable radio
modules
Product functions
Management, configuration,
programming
Number of manageable
IP addresses in the client
Product function
• CLI
• Web-based management
• MIB support
• TRAPs via e-mail
• Configuration with STEP 7
• Configuration with STEP 7 in the
TIA Portal
• SMTP server
• Operation with IWLAN controller
• Operation with Enterasys WLAN
controller
• iQoS
• Forced roaming with IWLAN
• WDS
Protocol is supported
• Address Resolution Protocol
(ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
Identification & maintenance
• I&M0 - device-specific
information
• I&M1 - higher-level designation/
location designation
1)
8
Wireless approval in the USA
Siemens IK PI · 2012
8/93
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W786 for the outdoor area
■ Technical specifications (continued)
Order No.
6GK5 786-3AA60-2AA0
6GK5 786-3AB60-2AA0
6GK5 786-2BA60-6AA0
6GK5 786-2AA60-6AA0
6GK5 786-3AA60-2AB01) 6GK5 786-3AB60-2AB01) 6GK5 786-2BA60-6AB01) 6GK5 786-2AA60-6AB01)
Product type designation
SCALANCE W786-3PRO
SCALANCE W786-3PRO
SCALANCE W786-2RR
SCALANCE W786-2RR
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
FM 3611: Class I,
Division 2, Groups
A,B,C,D, T4 / Class 1,
Zone 2, Group IIC, T4
EN 60079-15:2005,
EN 60079-0:2006, II 3 G
Ex nA II T4 KEMA 07
ATEX 0145X
UL 60950-1 CSA C22.2
No. 60950-1
UL 1604, CSA C22.2
No. 213-M1987, CL. 1,
Div. 2, GP. A,B,C,D, T4 /
CL. 1, Zone 2, GP IIC, T4
FM 3611: Class I,
Division 2, Groups
A,B,C,D, T4 / Class 1,
Zone 2, Group IIC, T4
EN 60079-15:2005,
EN 60079-0:2006, II 3 G
Ex nA II T4 KEMA 07
ATEX 0145X
UL 60950-1 CSA C22.2
No. 60950-1
UL 1604, CSA C22.2
No. 213-M1987, CL. 1,
Div. 2, GP. A,B,C,D, T4 /
CL. 1, Zone 2, GP IIC, T4
FM 3611: Class I,
Division 2, Groups
A,B,C,D, T4 / Class 1,
Zone 2, Group IIC, T4
EN 60079-15:2005,
EN 60079-0:2006, II 3 G
Ex nA II T4 KEMA 07
ATEX 0145X
UL 60950-1 CSA C22.2
No. 60950-1
UL 1604, CSA C22.2
No. 213-M1987, CL. 1,
Div. 2, GP. A,B,C,D, T4 /
CL. 1, Zone 2, GP IIC, T4
FM 3611: Class I,
Division 2, Groups
A,B,C,D, T4 / Class 1,
Zone 2, Group IIC, T4
EN 60079-15:2005,
EN 60079-0:2006, II 3 G
Ex nA II T4 KEMA 07
ATEX 0145X
UL 60950-1 CSA C22.2
No. 60950-1
UL 1604, CSA C22.2
No. 213-M1987, CL. 1,
Div. 2, GP. A,B,C,D, T4 /
CL. 1, Zone 2, GP IIC, T4
Product functions Diagnostics
Product function
• PROFINET IO diagnostics
• Link check
• Connection monitoring IP-Alive
• Localization by means of
Aeroscout
• SysLog
Product functions VLAN
Product function VLAN with IWLAN
Product functions DHCP
Product function DHCP client
Product functions Redundancy
STP/RSTP protocol is supported
Product functions Security
Product function
• ACL - MAC based
• IEEE 802.1x (radius)
• NAT/NAPT
• Access protection according to
IEEE802.11i
• WPA/WPA2
• TKIP/AES
Protocol is supported SSH
Product functions Time
SNTP protocol is supported
Standards, specifications,
approvals
Standard
• for EMC of FM
8
• for hazardous zone
• for CSA and UL safety
• for hazardous zone of CSA
and UL
1)
Wireless approval in the USA
8/94
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W786 for the outdoor area
■ Technical specifications (continued)
Order No.
6GK5 786-3AA60-2AA0
6GK5 786-3AB60-2AA0
6GK5 786-2BA60-6AA0
6GK5 786-2AA60-6AA0
6GK5 786-3AA60-2AB01) 6GK5 786-3AB60-2AB01) 6GK5 786-2BA60-6AB01) 6GK5 786-2AA60-6AB01)
Product type designation
SCALANCE W786-3PRO
SCALANCE W786-3PRO
SCALANCE W786-2RR
SCALANCE W786-2RR
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
No
You can find the latest list
of countries at:
www.siemens.com/
simatic-net/ik-info
You can find the latest list
of countries at:
www.siemens.com/
simatic-net/ik-info
You can find the latest list
of countries at:
www.siemens.com/
simatic-net/ik-info
You can find the latest list
of countries at:
www.siemens.com/
simatic-net/ik-info
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
No
Yes
No
Yes
No
48 V DC screw terminal
included in scope of
delivery
48 V DC screw terminal
included in scope of
delivery
48 V DC screw terminal
included in scope of
delivery
48 V DC screw terminal
included in scope of
delivery
Certificate of suitability
• CE marking
• EC Declaration of Conformity
• C-Tick
• CCC
• Railroad application according to
EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet
according to IEEE802.3at
for Type 1 and IEEE802.3af
Standard for wireless
communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Wireless approval
Marine classification association
• American Bureau of Shipping
Europe Ltd. (ABS)
• Bureau Veritas (BV)
• Det Norske Veritas (DNV)
• Germanischer Lloyd (GL)
• Lloyds Register of Shipping
(LRS)
• Nippon Kaiji Kyokai (NK)
• Polski Rejestr Statkow (PRS)
Accessories
Accessories
1)
Wireless approval in the USA
Siemens IK PI · 2012
8/95
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W786 for the outdoor area
■ Ordering data
Order No.
SCALANCE W786 access points (continued)
IWLAN access points with
built-in wireless interfaces;
wireless networks
IEEE 802.11a/b/g/h at 2.4/5 GHz
up to 54 Mbit/s; WPA2/AES;
Power over Ethernet (PoE),
IP65 degree of protection
(-40 °C to +70 °C);
scope of supply:
Mounting hardware,
2-pin screw terminal for 48 V DC;
manual on CD-ROM;
German/English;
SCALANCE W786-2PRO
IWLAN Access Points with two
built-in radio interfaces
RJ45 connection
• Four internal antennas
- National approvals for
operation outside the USA
- National approvals for
operation within the USA1)
• Connections for four external
antennas
- National approvals for
operation outside the USA
- National approvals for
operation within the USA1)
SCALANCE W786-1PRO
IWLAN Access Points with one
built-in radio interface
RJ45 connection
• Two internal antennas
- National approvals for
operation outside the USA
- National approvals for
operation within the USA1)
• Connections for two external
antennas
- National approvals for
operation outside the USA
- National approvals for
operation within the USA1)
• Two internal antennas
- National approvals for
operation outside the USA
- National approvals for
operation within the USA1)
• Connections for two external
antennas
- National approvals for
operation outside the USA
- National approvals for
operation within the USA1)
6GK5 786-2BA60-2AA0
6GK5 786-2BA60-2AB0
6GK5 786-2AA60-2AA0
6GK5 786-2AA60-2AB0
Fiber-optic cable connection
6GK5 786-1BA60-2AA0
6GK5 786-1BA60-2AB0
6GK5 786-1AA60-2AA0
6GK5 786-1AA60-2AB0
Fiber-optic cable connection
8
Order No.
SCALANCE W786 access points
• Four internal antennas
- National approvals for
operation outside the USA
- National approvals for
operation within the USA1)
• Connections for four external
antennas
- National approvals for
operation outside the USA
- National approvals for
operation within the USA1)
6GK5 786-2BB60-2AA0
6GK5 786-2BB60-2AB0
6GK5 786-2AB60-2AA0
6GK5 786-2AB60-2AB0
SCALANCE W786-3PRO
6GK5 786-1BB60-2AA0
IWLAN Access Points with three
built-in radio interfaces
6GK5 786-1BB60-2AB0
RJ45 connection
6GK5 786-1AB60-2AA0
• Connections for six external
antennas
- National approvals for
operation outside the USA
- National approvals for
operation within the USA1)
6GK5 786-1AB60-2AB0
6GK5 786-3AA60-2AA0
6GK5 786-3AA60-2AB0
Fiber-optic cable connection
• Connections for six external
antennas
- National approvals for
operation outside the USA
- National approvals for
operation within the USA1)
6GK5 786-3AB60-2AA0
6GK5 786-3AB60-2AB0
SCALANCE W786-2RR
IWLAN Dual Access Point with
two built-in radio interfaces for
establishment of radio links
with iPCF
RJ45 connection
• Four internal antennas
- National approvals for
operation outside the USA
- National approvals for
operation within the USA1)
• Connections for four external
antennas
- National approvals for
operation outside the USA
- National approvals for
operation within the USA1)
1)
Please note national approvals at
www.siemens.com/wireless-approvals
8/96
Siemens IK PI · 2012
6GK5 786-2BA60-6AA0
6GK5 786-2BA60-6AB0
6GK5 786-2AA60-6AA0
6GK5 786-2AA60-6AB0
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Access Points IEEE 802.11a/b/g
SCALANCE W786 for the outdoor area
■ Ordering data
Order No.
Accessories
C-PLUG
Swap medium for simple
replacement of devices in the
event of a fault;
for storing configuration data;
can be used in SIMATIC NET
products with PLUG slot
6GK1 900-0AB00
PRESET-PLUG
Swap medium for simple initial
startup of SCALANCE W access
points and client modules,
as well as IWLAN/PB Link PN IO
6GK5 798-8AB00
SIMATIC Mobile Panel 277F
IWLAN
• Communication via WLAN
(PROFINET)
with acknowledgement button
and emergency stop button
• Communication via WLAN
(PROFINET)
with acknowledgment button
and emergency stop button
with integrated handwheel,
key-operated switch, and two
illuminated pushbuttons
Note:
Please also order the desktop
power supply or battery charger!
• Table-top power supply incl.
power cable for EU, US, UK, JP
(only suitable for operation
under laboratory/office conditions)
• Charger for safe storage and
charging the device incl. lock for
securing the device in the
charger. Charging capabilities
for up to two additional batteries
• Additional battery with LED
indicator for indicating the
charge status
• Transponder incl. batteries
(3x AA)
IE FC RJ45 Plug 180 2x2
RJ45 plug connector for
Industrial Ethernet with a rugged
metal enclosure and integrated
insulation-displacement contacts
for connecting Industrial Ethernet
FC installation cables;
with a 180° cable outlet;
for network components and
CPs/CPUs with Industrial Ethernet
interface
• 1 pack = 1 unit
• 1 pack = 10 units
• 1 pack = 50 units
Order No.
IE FC Standard Cable GP 2 x 2
6XV1 840-2AH10
4-core, shielded TP installation
cable for connection to IE
FC Outlet RJ45/ IE FC RJ45 Plug;
PROFINET-compliant;
with UL approval;
sold by the meter;
max. length 1000 m,
minimum order 20 m
FO standard cable GP
50/125/1400 1)
6XV1 873-2A
Multimode cable,
sold by the meter;
max. length 1000 m;
minimum order 20 m;
6AV6 645-0DB01-0AX0
IE FC Stripping Tool
6GK1 901-1GA00
Preadjusted stripping tool
for fast stripping of the
Industrial Ethernet FC cables
6AV6 645-0DC01-0AX0
IE TP Cord RJ45/RJ45
TP cable 4 x 2
with 2 RJ45 connectors
• 0.5 m
•1m
•2m
•6m
• 10 m
6XV1 870-3QE50
6XV1 870-3QH10
6XV1 870-3QH20
6XV1 870-3QH60
6XV1 870-3QN10
6AV6 671-5CN00-0AX1
Power supply PS791-2DC
6GK5 791-2DC00-0AA0
6AV6 671-5CE00-0AX0
24 V DC power supply for installation in SCALANCE W786
products; operating instructions
in German/English
Power supply PS791-2AC
6AV6 671-5CL00-0AX0
6AV6 671-5CM00-0AX0
6GK5 791-2AC00-0AA0
110 V AC to 230 V AC power
supply for installation in the
SCALANCE W786 products;
operating instructions
in German/English
MS1 mounting set
6GK5 798-8MG00-0AA0
8
Mounting set for fixing the
SCALANCE W786 products onto
an S7-300 mounting rail or a
35 mm standard DIN rail
Antennas and miscellaneous
IWLAN accessories
See Industrial Wireless LAN/
accessories
6GK1 901-1BB10-2AA0
6GK1 901-1BB10-2AB0
6GK1 901-1BB10-2AE0
■ More information
Wireless approvals:
Current approvals can be found on the Internet at:
www.siemens.com/wireless-approvals
To assist in selecting the right products for Industrial Wireless
Communication, the SIMATIC NET Selection Tool is available:
Online version:
www.siemens.com/snst
Offline version:
www.siemens.com/snst-download
Siemens IK PI · 2012
8/97
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Controller Access Points IEEE 802.11a/b/g
Controller Access Points SCALANCE W786
for the outdoor area
■ Overview
■ Design
• Rugged plastic enclosure (plexi-glass type), shock and
vibration-proof for severe mechanical loading
• High IP65 degree of protection against dust and water jets
• For use at ambient temperatures from -40 °C to +70 °C
• Resistant to condensation
• Resistant to UV radiation and saltwater spray
• Design for use outdoors
• Version with 1 x RJ45 connection for 10/100 Mbit/s with
Power-over-Ethernet according to IEEE 802.3at Type 1
(corresponds to IEEE 802.3af)
• Version with 1 x fiber-optic connection (multimode) for
100 Mbit/s
• Version with 1 x 48 V DC connection, optional operation with
12 to 24 V DC or 100 to 240 V AC with power supply integrated
into device
• Mounting: Wall or, with optional mounting set, on S7 mounting
rail, 35 mm standard mounting rail, or on a pole
Infeed of 48 V DC or with
power supplies 100-240 V
AC or
12-24 V DC
Depending on variant:
- RJ45 connection
- Fiber-optic connection
(multimode)
Reset button
C-PLUG
slot
Antenna
connections
depending
on variant
Dependent on variant:
internal antennas in this case
8
*B,.B;;B
• SCALANCE W786-2HPW controller-based access points can
only be operated on the SCALANCE WLC IWLAN Controller
and Enterasys Wireless Controller (previously HiPath Wireless
Controller)
• Support for the WLAN standards IEEE 802.11a/b/g/h
• Especially well suited to applications with high climatic
requirements when installed outdoors and in areas accessible
to the public
Design and interfaces of the SCALANCE W786-2HPW controller-based
access points
Product versions
SCALANCE W786-2HPW (controller-based)
• Two wireless cards permanently installed in the device
• Versions with:
- RJ45 connection and four internal antennas
- RJ45 connection and four connections for external antennas
- Fiber-optic multimode connection (BFOC) and four internal
antennas
- Fiber-optic multimode connection (BFOC) and four
connections for external antennas
■ Function
If the minimum length of standard Ethernet cables is insufficient
due to the large distance of the access points from the wired
network, SCALANCE W786-2HPW can also be used in a version
with BFOC connectors (multimode fiber-optic cable).
8/98
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Controller Access Points IEEE 802.11a/b/g
Controller Access Points SCALANCE W786
for the outdoor area
■ Technical specifications
Order No.
6GK5 786-2BA60-1CA0
6GK5 786-2AA60-1CA0
6GK5 786-2BB60-1CA0
6GK5 786-2AB60-1CA0
Product type designation
SCALANCE W7862HPW
SCALANCE W7862HPW
SCALANCE W7862HPW
SCALANCE W7862HPW
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous
use of several radio
channels, a transmission
rate of 108 Mbit/s is
possible (turbo mode)
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous
use of several radio
channels, a transmission
rate of 108 Mbit/s is
possible (turbo mode)
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous
use of several radio
channels, a transmission
rate of 108 Mbit/s is
possible (turbo mode)
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous
use of several radio
channels, a transmission
rate of 108 Mbit/s is
possible (turbo mode)
1
1
-
-
1
1
1
1
1
1
1
1
RJ45 socket
RJ45 socket
-
-
2-pin connector (48 VDC)
or optionally available
power supply adapter
(3-pin 24 V DC or 4-pin
110 to 230 V AC)
2-pin connector (48 VDC)
or optionally available
power supply adapter
(3-pin 24 V DC or 4-pin
110 to 230 V AC)
2-pin connector (48 VDC)
or optionally available
power supply adapter
(3-pin 24 V DC or 4-pin
110 to 230 V AC)
2-pin connector (48 VDC)
or optionally available
power supply adapter
(3-pin 24 V DC or 4-pin
110 to 230 V AC)
Number of optical connections for
fiber-optic cables at 100 Mbit/s
-
-
1
1
Design of optical connection for
fiber-optic cables at 100 Mbit/s
-
-
Duplex multi-mode FOC
(ST)
Duplex multi-mode FOC
(ST)
Design of swap medium C-Plug
Yes
Yes
Yes
Yes
Number of permanently installed
radio cards
2
2
2
2
Number of internal antennas
4
-
4
-
Number of electrical connections
for external antenna(s)
-
4
-
4
Design of electrical connection for
external antenna(s)
-
R-SMA female (socket)
-
R-SMA female (socket)
DC
DC
DC
DC
48 V
48 V
48 V
48 V
-
-
-
-
Transmission rate
Transmission rate
• with W-LAN, maximum
• with Industrial Ethernet
• Note
Interfaces
Number of electrical connections
• for network components or
terminal equipment
• for power supply
• For redundant power supply
Design of electrical connection
• for network components or
terminal equipment
• for power supply
Interfaces Wireless
Supply voltage,
current consumption, power loss
Type of power supply
Power supply
• From Power-over-Ethernet
according to IEEE802.3at
for Type 1 and IEEE802.3af
• From Power-over-Ethernet
according to IEEE802.3at
for Type 2
Siemens IK PI · 2012
8/99
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Controller Access Points IEEE 802.11a/b/g
Controller Access Points SCALANCE W786
for the outdoor area
■ Technical specifications (continued)
Order No.
6GK5 786-2BA60-1CA0
6GK5 786-2AA60-1CA0
6GK5 786-2BB60-1CA0
6GK5 786-2AB60-1CA0
Product type designation
SCALANCE W7862HPW
SCALANCE W7862HPW
SCALANCE W7862HPW
SCALANCE W7862HPW
0.34 A
0.34 A
0.34 A
0.34 A
0.4 A
0.2 A
0.4 A
0.2 A
-
-
-
-
8W
8W
8W
8W
9.5 W
9.5 W
9.5 W
9.5 W
-
-
-
-
-40 … +70 °C
-40 … +85 °C
-40 … +85 °C
-40 … +70 °C
-40 … +85 °C
-40 … +85 °C
-40 … +70 °C
-40 … +85 °C
-40 … +85 °C
-40 … +70 °C
-40 … +85 °C
-40 … +85 °C
Relative humidity at 25 °C without
condensation during operation,
maximum
100 %
100 %
100 %
100 %
IP degree of protection
IP65
IP65
IP65
IP65
Ambient conditions for operation
When using the
100 … 240 V AC power
supply, an operating
temperature of -40 °C to
+60 °C is permissible
When using the
100 … 240 V AC power
supply, an operating
temperature of -40 °C to
+60 °C is permissible
When using the
100 … 240 V AC power
supply, an operating
temperature of -40 °C to
+60 °C is permissible
When using the
100 … 240 V AC power
supply, an operating
temperature of -40 °C to
+60 °C is permissible
Width of enclosure without antenna
251 mm
251 mm
251 mm
251 mm
Height of enclosure without antenna
251 mm
251 mm
251 mm
251 mm
Depth of enclosure without antenna
72 mm
72 mm
72 mm
72 mm
Net weight
2.24 kg
2.24 kg
2.24 kg
2.24 kg
Type of mounting: wall mounting
Yes
Yes
Yes
Yes
Type of mounting
For mast mounting,
35 mm DIN rail mounting
and S7-300 rail mounting,
an additional retaining
plate is required
For mast mounting,
35 mm DIN rail mounting
and S7-300 rail mounting,
an additional retaining
plate is required
For mast mounting,
35 mm DIN rail mounting
and S7-300 rail mounting,
an additional retaining
plate is required
For mast mounting,
35 mm DIN rail mounting
and S7-300 rail mounting,
an additional retaining
plate is required
2.41 … 2.48 GHz
2.41 … 2.48 GHz
2.41 … 2.48 GHz
2.41 … 2.48 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Current consumed
• At 24 V DC, typical
• With Power-over-Ethernet
according to IEEE802.3at
for Type 1 and IEEE802.3af,
typical
• With Power-over-Ethernet
according to IEEE802.3at
for Type 2, typical
Effective power loss
• At 24 V DC, typical
• With Power-over-Ethernet
according to IEEE802.3at
for Type 1 and IEEE802.3af,
typical
• With Power-over-Ethernet
according to IEEE802.3at
for Type 2, typical
Permitted ambient conditions
Ambient temperature
• During operation
• During storage
• During transport
Design, dimensions and weights
8
Radio frequencies
Radio frequency
• with WLAN in the 2.4 GHz
frequency band
• With WLAN in the 5 GHz
frequency band
Product functions
Management, configuration,
programming
Product function
• Operation with IWLAN controller
• Operation with Enterasys WLAN
controller
8/100
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Controller Access Points IEEE 802.11a/b/g
Controller Access Points SCALANCE W786
for the outdoor area
■ Technical specifications (continued)
Order No.
6GK5 786-2BA60-1CA0
6GK5 786-2AA60-1CA0
6GK5 786-2BB60-1CA0
6GK5 786-2AB60-1CA0
Product type designation
SCALANCE W7862HPW
SCALANCE W7862HPW
SCALANCE W7862HPW
SCALANCE W7862HPW
FM 3611: Class I,
Division 2, Groups
A,B,C,D, T4 / Class 1,
Zone 2, Group IIC, T4
EN 60079-15:2005,
EN 60079-0:2006,
II 3 G Ex nA II T4 KEMA
07 ATEX 0145X
UL 60950-1 CSA C22.2
No. 60950-1
UL 1604, CSA C22.2
No. 213-M1987, CL. 1,
Div. 2, GP. A, B, C, D, T4 /
CL. 1, Zone 2, GP IIC, T4
FM 3611: Class I,
Division 2, Groups
A,B,C,D, T4 / Class 1,
Zone 2, Group IIC, T4
EN 60079-15:2005,
EN 60079-0:2006,
II 3 G Ex nA II T4 KEMA
07 ATEX 0145X
UL 60950-1 CSA C22.2
No. 60950-1
UL 1604, CSA C22.2
No. 213-M1987, CL. 1,
Div. 2, GP. A, B, C, D, T4 /
CL. 1, Zone 2, GP IIC, T4
FM 3611: Class I,
Division 2, Groups
A,B,C,D, T4 / Class 1,
Zone 2, Group IIC, T4
EN 60079-15:2005,
EN 60079-0:2006,
II 3 G Ex nA II T4 KEMA
07 ATEX 0145X
UL 60950-1 CSA C22.2
No. 60950-1
UL 1604, CSA C22.2
No. 213-M1987, CL. 1,
Div. 2, GP. A, B, C, D,
T4 / CL. 1, Zone 2,
GP IIC, T4
FM 3611: Class I,
Division 2, Groups
A,B,C,D, T4 / Class 1,
Zone 2, Group IIC, T4
EN 60079-15:2005,
EN 60079-0:2006,
II 3 G Ex nA II T4 KEMA
07 ATEX 0145X
UL 60950-1 CSA C22.2
No. 60950-1
UL 1604, CSA C22.2
No. 213-M1987, CL. 1,
Div. 2, GP. A, B, C, D, T4 /
CL. 1, Zone 2, GP IIC, T4
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
No
You can find the
latest list of countries at:
www.siemens.com/
simatic-net/ik-info
You can find the
latest list of countries at:
www.siemens.com/
simatic-net/ik-info
You can find the latest list
of countries at:
www.siemens.com/
simatic-net/ik-info
You can find the
latest list of countries at:
www.siemens.com/
simatic-net/ik-info
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
No
Yes
Yes
Yes
No
Yes
No
Yes
Yes
Yes
No
Yes
No
Yes
Yes
Yes
No
48 V DC screw terminal
included in scope of
delivery
48 V DC screw terminal
included in scope of
delivery
48 V DC screw terminal
included in scope of
delivery
48 V DC screw terminal
included in scope of
delivery
Standards, specifications,
approvals
Standard
• for EMC of FM
• For hazardous zone
• for CSA and UL safety
• for Ex zone of CSA and UL
Certificate of suitability
• CE mark
• EC Declaration of Conformity
• C-Tick
• CCC
• Railroad application
according to EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet
according to IEEE802.3at
for Type 1 and IEEE802.3af
Standard for wireless
communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11n
Wireless approval
Marine classification corporation
• American Bureau of Shipping
Europe Ltd. (ABS)
• Bureau Veritas (BV)
• Det Norske Veritas (DNV)
• Germanischer Lloyd (GL)
• Lloyds Register of Shipping (LRS)
• Nippon Kaiji Kyokai (NK)
• Polski Rejestr Statkow (PRS)
Accessories
Accessories
Siemens IK PI · 2012
8/101
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Controller Access Points IEEE 802.11a/b/g
Controller Access Points SCALANCE W786
for the outdoor area
■ Ordering data
Order No.
MS1 mounting set
IWLAN access points for
operating with the SCALANCE
WLC IWLAN Controller and
Enterasys Wireless Controller
(previously HiPath Wireless
Controller); with two built-in
wireless interfaces; wireless
networks IEEE 802.11a/b/g/h at
2.4/5 GHz up to 54 Mbit/s; WPA2/
AES; Power over Ethernet (PoE),
IP65 degree of protection
(-40 °C to +70 °C);
scope of delivery:
Mounting hardware,
2-pin screw terminal for 48 V DC;
manual on CD-ROM;
German/English
Mounting set for fixing the
SCALANCE W786-2HPW
products onto an S7-300
mounting rail or a 35 mm
standard DIN rail
RJ45 connection
• Four internal antennas
• Connections for four external
antennas
Fiber-optic cable connection
• Four internal antennas
• Connections for four external
antennas
Power supply PS791-2DC
6GK5 786-2BA60-1CA0
6GK5 786-2AA60-1CA0
6GK5 786-2BB60-1CA0
6GK5 786-2AB60-1CA0
6GK5 791-2DC00-0AA0
12 to 24 V DC power supply for
installation in the SCALANCE
W786-2HPW products; operating
instructions in German/English
Power supply PS791-2AC
6GK5 791-2AC00-0AA0
■ More information
Wireless approvals:
Current approvals can be found on the Internet at:
www.siemens.com/wireless-approvals
To assist in selecting the right products for Industrial Wireless
Communication, the SIMATIC NET Selection Tool is available:
Online version:
www.siemens.com/snst
Offline version:
www.siemens.com/snst-download
Siemens IK PI · 2012
RJ45 plug connector for Industrial
Ethernet (10/100/1000 Mbit/s)
with a rugged metal enclosure
and integrated insulation
displacement contacts for
connecting Industrial Ethernet FC
installation cables; 180° cable
outlet; for network components
and CPs/CPUs with Industrial
Ethernet interface
• 1 pack = 1 unit
• 1 pack = 10 units
• 1 pack = 50 units
6GK1 901-1BB11-2AA0
6GK1 901-1BB11-2AB0
6GK1 901-1BB11-2AE0
IE FC Standard Cable GP 4 x 2
6XV1 878-2A
8-core, shielded TP installation
cable for connection to
IE FC RJ45 Plug 4 x 2 and IE M12
Plug PRO 4 x 2;
PROFINET-compatible;
with UL approval;
sold by the meter;
max. length 1000 m,
minimum order quantity 20 m
IE FC Stripping Tool
110 V AC to 230 V AC power
supply for installation in the
SCALANCE W786-2HPW
products; operating instructions
in German/English
8/102
6GK5 798-8MG00-0AA0
IE FC RJ45 Plug 4 x 2
Accessories
8
Order No.
SCALANCE W786-2HPW Controller Access Points
6GK1 901-1GA00
Preadjusted stripping tool
for fast stripping of the
Industrial Ethernet FC cables
Antennas and miscellaneous
IWLAN accessories
See Industrial Wireless LAN/
accessories
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11n
Overview
■ Overview
The Client Modules from the SCALANCE W748 product line are
optimal for integrating Industrial Ethernet stations into Industrial
Wireless LAN (IWLAN) for 2.4 GHz and 5 GHz.
• High transmission rates (up to 450 Mbit/s in conjunction with
Channel Bonding) due to 3x3 MIMO technology
(Multiple Input, Multiple Output);
for this purpose, SCALANCE W Client Modules use three
streams each for simultaneous sending and receiving
• Suitable for any application:
- SCALANCE W748 RJ45 for installation in a control cabinet
- SCALANCE W748 M12 for cabinet-free installation
• Reliable thanks to rugged enclosure, protected from water
and dust (IP65), resistant to shock, vibration and electromagnetic fields
• Complex applications with redundancy requirements and
high bandwidths, e.g. for video, by using IEEE 802.11n
• Configuration support by means of wizards and online help;
easy management via web server and SNMP
• Fast replacement of devices in event of failure by means of
optional C-PLUG (Configuration Plug)
■ Benefits
• Reliable radio link, e.g. by using MIMO technology and
monitoring of the radio link
• Cost savings due to one single radio network both for
process-critical data and for non-critical communication
• Investment security because all products are compatible with
the internationally recognized WLAN standard IEEE 802.11,
suitable for the unlicensed frequency bands of 2.4 GHz and
5 GHz (ISM bands)
• Implementation of data-intensive applications such as video
streaming through the support of the IEEE 802.11n standard
including Channel Bonding
• Reduced operating costs, because there is no wear of rotating
and moving plant sections
• Cost-effective connection to devices which are remote,
difficult to access or mounted in hostile environments
■ Application
The Client Modules of the SCALANCE W748 product line are
designed for indoor and outdoor industrial applications as well
as for low-cost integration in control cabinets. They provide a
reliable wireless link with fast transfer from one access point to
the next (roaming). In this manner, processes can be monitored
and production failures through machine downtimes avoided.
The client modules with high IP65 degree of protection and
extended temperature range from -20 to +60 °C are especially
suitable for use outdoors. SCALANCE W products are siliconefree and can therefore also be used in paint shops.
The client modules with IP30 degree of protection are especially
suitable for use in automated guided vehicle systems or
suspended monorails.
When using the RCoax cable (radiating cable), operation is
particularly reliable in conveying technology and all track applications (e.g. storage and retrieval systems).
8
Siemens IK PI · 2012
8/103
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11n
Overview
■ Application (continued)
Application examples:
• Automated guided vehicle systems (AGVS) and suspended
monorails;
prevention of wear and high flexibility in the choice of route
thanks to wireless transmission of data to the vehicles
• Crane;
high flexibility through access to data communication with the
moving unit independent of the location
• Passenger transportation systems;
transmission of high-quality video streams between the
control center and buses or trains
• Tunnel application;
reliable radio link since the devices can handle multiple path
propagation better by using the MIMO technology
• Communication with moving stations (e.g. mobile controls and
devices), container logistics, storage and retrieval machines,
conveyor systems, conveyor belts, rotating machines, trucks
• Wireless coupling of communication segments and bridging
of large distances for fast commissioning and for costeffective networks in which cable routing would be extremely
expensive (e.g. on public roads, rivers, lakes, train lines)
Multipath propagation according to IEEE 802.11a/b/g
SCALANCE
W788-1PRO
SCALANCE
W746-1PRO
SCALANCE
W788-1 M12
Multiple path propagation (MIMO) with SCALANCE W788-1PRO and SCALANCE W788-1 M12
■ Design
8
• Radio card (compatible with IEEE 802.11a/b/g/h/n)
permanently installed in the device
• Designed without rotating parts (operation without fans)
• Antennas can either be connected by means of a screw
connection (R-SMA, N-Connect) or they are integrated in the
device
• Function LEDs for optical signaling of faults and operating
states
• 1x PLUG slot
8/104
Siemens IK PI · 2012
SCALANCE
W748-1 M12
G_IK10_XX_30268
Multipath propagation according to IEEE 802.11n (MIMO)
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11n
Overview
■ Function
Infrastructure mode
Security
SCALANCE W748 Client Modules make it possible for a station
with an Industrial Ethernet interface (e.g. a controller) to move
seamlessly and with no wear in an Industrial Wireless LAN
wireless field. The station registers in the wireless field via the
Client Module and can exchange information with the entire data
network. If the Client Module moves, for example, on an
automated guided vehicle system, it is automatically and transparently transferred from one access point to the next (roaming).
A high degree of data security is achieved by means of the
WPA2/IEEE 802.11i mechanisms. These define modern procedures that control a regular exchange of the complete 128-bit
code as well as performing the access check (authentication) of
a station. The Advanced Encryption Standard (AES) is available
for data encryption.
This is possible over distances of up to 30 m indoors (approx.
100 m outdoors). Directional additional antennas can be used
outdoors to achieve ranges of several thousand meters.
Apart from a reliable wireless link, the SCALANCE W748 Client
Modules are characterized by their support of IT mechanisms:
• IEEE 802.11a/b/g/n for different frequency ranges
• IEEE 802.11h for use in the 5 GHz range outdoors
• IEEE802.11e for wireless multimedia (WMM)
• IEEE802.11i for security
• Selectable operation in infrastructure or ad-hoc mode
• Sending the log entries of the SCALANCE W devices to a
Syslog server
• Modern security mechanisms (e.g. network security such as
IEEE 802.1x, RADIUS, EAP mechanisms)
• Network and Port Address Translation (NAT/PAT) for mapping
of private IP addresses and ports onto public addresses
Access to the devices (HTTPS) is encrypted and secure logon
(SSH) is possible. If a security concept with Virtual Private
Networks (VPN) or the SCALANCE S range is required, the
products can be integrated without any difficulty.
Functional scope
The SCALANCE W748 Client Modules can manage the wireless
connection for up to eight connected devices with Ethernet
interface. It is possible to integrate mobile units with a small
Ethernet network (up to eight devices) into an IWLAN wireless
field.
Diagnostics and management
• Web-based (HTTP/HTTPS) management tool for configuration
and diagnostics using a standard browser
• LEDs for signaling operating states and fault conditions
• Signaling of faults by means of SNMP trap or e-mail to a
network management tool, e.g. SINEMA-Server
8
Siemens IK PI · 2012
8/105
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11n
SCALANCE W748 RJ45
for use in the control cabinet
■ Overview
■ Design
• Especially suitable for applications where the client module is
to be mounted in the control cabinet
• Low-cost alternative for use indoors with less severe environmental conditions
• The rugged aluminum enclosure with degree of protection
IP30 nevertheless provides protection against mechanical
and electromagnetic stress in industrial areas
• Rugged aluminum enclosure, shock and vibration-proof,
for high mechanical requirements
• Dust protection with IP30 degree of protection
• For use at ambient temperatures from -20 °C to +60 °C
• Resistant to condensation
• Design suitable for installation in control cabinet
• 3 x R-SMA sockets for the connection of remote antennas
• Antenna placement optimized for the 3x3 MIMO technology;
the antennas do not interfere with each other when they are
mounted direct on the device
• 1 x RJ45 connection for 10/100/1000 Mbit/s with
Power-over-Ethernet according to IEEE 802.3at Type 1
(corresponds to IEEE 802.3af)
• 2 x 24 V DC connection for redundant power infeed
• 1 x PLUG slot
• Function LEDs for optical signaling of faults and operating
states
• Digital input for feeding in a signal from a sensor, for example,
to an SNMP-based network management system
• Digital output for converting a command received over SNMP
into a signal and switching a hardware function
• Mounting: Wall, S7 mounting rail or on 35 mm standard
mounting rail
3x R-SMA (female) antenna connections
PLUG
slot
Terminal block for
digital input/output
24 V DC
connection
RJ45 connection
(Gigabit)
*B,.B;;B
8
Design and interfaces of the SCALANCE W748-1 RJ45 Client Modules
Product versions
SCALANCE W748-1 RJ45
• A wireless card permanently installed in the device;
for managing the wireless connection of up to eight connected
devices
8/106
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11n
SCALANCE W748 RJ45
for use in the control cabinet
■ Technical specifications
Order No.
6GK5 748-1FC00-0AA0
6GK5 748-1FC00-0AB01)
Product type designation
SCALANCE W748-1 RJ45
Transmission rate
Transmission rate
• with W-LAN, maximum
• with Industrial Ethernet
• Note
Design of electrical connection
• for network components or
terminal equipment
• for power supply
Number of optical connections for
fiber-optic cables at 100 Mbit/s
450 Mbit/s
10 … 1 000 Mbit/s
-
1
1
1
Product type designation
SCALANCE W748-1 RJ45
Ambient temperature
• During operation
• During storage
• During transport
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
Relative humidity at 25 °C without
condensation during operation,
maximum
90 %
IP degree of protection
IP30
Ambient conditions for operation
-
Design, dimensions and weights
Width of enclosure without antenna
200 mm
Height of enclosure without antenna
158 mm
4-pin screw terminal, PoE
Depth of enclosure without antenna
79 mm
-
Net weight
1.7 kg
Type of mounting: wall mounting
Yes
Type of mounting
S7-300 rail mounting
RJ45 socket
Design of optical connection for
fiber-optic cables at 100 Mbit/s
-
Design of swap medium C-Plug
Yes
Interfaces wireless
Number of permanently installed
wireless cards
1
Number of internal antennas
-
Number of electrical connections
for external antenna(s)
3
Design of electrical connection for
external antenna(s)
R-SMA female (socket)
Inputs/outputs
Number of digital inputs
1
Number of digital outputs
1
Design of electrical connection at
the digital inputs/outputs
4-pin screw terminal
Signal range
• at the digital input
• at the digital output
6GK5 748-1FC00-0AA0
6GK5 748-1FC00-0AB01)
Permissible ambient conditions
Interfaces
Number of electrical connections
• for network components or
terminal equipment
• for power supply
• for redundant power supply
Order No.
Wireless frequencies
Wireless frequency
• With WLAN in the 2.4 GHz
frequency band
• With WLAN in the 5 GHz
frequency band
2.41 … 2.48 GHz
4.9 … 5.8 GHz
Product properties,
functions, components
General
Number of SSIDs
1
Product function
• Dual client
• iHOP
• iPCF
• iPCF-MC
-
Number of iPCF-capable
radio modules
8
-
24 V DC, safety extra low voltage
24 V DC/ 1 A
Supply voltage,
current consumption, power loss
Type of power supply
Power supply
• 1 from terminal block
• 2 from terminal block
• From Power-over-Ethernet
according to IEEE802.3at
for Type 1 and IEEE802.3af
• From Power-over-Ethernet
according to IEEE802.3at
for Type 2
1)
DC
19.2 V
28.8 V
48 V
48 V
Wireless approval in the USA
Siemens IK PI · 2012
8/107
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11n
SCALANCE W748 RJ45
for use in the control cabinet
■ Technical specifications (continued)
Order No.
6GK5 748-1FC00-0AA0
6GK5 748-1FC00-0AB01)
Product type designation
SCALANCE W748-1 RJ45
Product functions
Management, configuration,
programming
Number of manageable
IP addresses in the client
Product function
• CLI
• Web-based management
• MIB support
• TRAPs via e-mail
• Configuration with STEP 7
• Configuration with STEP 7 in the
TIA Portal
• SMTP server
• Operation with IWLAN controller
• Operation with Enterasys WLAN
controller
• Forced roaming with IWLAN
• WDS
Protocol is supported
• Address Resolution Protocol
(ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
8
Identification & maintenance
• I&M0 - device-specific
information
• I&M1 - higher-level designation/
location designation
8
Yes
Yes
Yes
Yes
No
No
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
Yes
Product functions VLAN
Product function VLAN with IWLAN
6GK5 748-1FC00-0AA0
6GK5 748-1FC00-0AB01)
Product type designation
SCALANCE W748-1 RJ45
Product functions Security
Product functions Diagnostics
Product function
• PROFINET IO diagnostics
• Link check
• Connection monitoring IP-Alive
• Localization by means of
Aeroscout
• SysLog
Order No.
Product function
• ACL - MAC based
• IEEE 802.1x (radius)
• NAT/NAPT
• Access protection
according to IEEE802.11i
• WPA/WPA2
• TKIP/AES
Protocol is supported SSH
SNTP protocol is supported
STP/RSTP protocol is supported
Standard
• for EMC of FM
• for hazardous zone
• for CSA and UL safety
• for hazardous zone of CSA
and UL
Certificate of suitability
• CE marking
• EC Declaration of Conformity
• C-Tick
• CCC
• Railroad application
according to EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet
according to IEEE802.3at
for Type 1 and IEEE802.3af
• Power-over-Ethernet according
to IEEE802.3at for Type 2
Standard for wireless
communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Wireless approval
Yes
Marine classification association
• American Bureau of Shipping
Europe Ltd. (ABS)
• Bureau Veritas (BV)
• Det Norske Veritas (DNV)
• Germanischer Lloyd (GL)
• Lloyds Register of Shipping (LRS)
• Nippon Kaiji Kyokai (NK)
• Polski Rejestr Statkow (PRS)
No
Yes
Yes
Standards, specifications,
approvals
No
Product functions Redundancy
Yes
Yes
Product functions Time
Product functions DHCP
Product function DHCP client
No
Yes
Yes
Yes
UL 60950-1 CSA C22.2
No. 60950-1
-
Yes
Yes
Yes
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
You can find the latest list of
countries at: www.siemens.com/
simatic-net/ik-info
No
No
No
No
No
No
No
Accessories
Accessories
1)
Wireless approval in the USA
8/108
Siemens IK PI · 2012
24 V DC screw terminal and
screw terminal for digital input
and output included in scope of
delivery
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11n
SCALANCE W748 RJ45
for use in the control cabinet
■ Ordering data
Order No.
Order No.
SCALANCE W748 Client Modules
IE FC RJ45 Plug 4 x 2
IWLAN Ethernet Client Modules
with built-in wireless interface;
wireless networks
IEEE 802.11a/b/g/h/n
at 2.4/5 GHz up to 450 Mbit/s;
WPA2/AES;
Power over Ethernet (PoE),
IP30 degree of protection
(-20 °C to +60 °C);
scope of delivery:
Mounting hardware,
4-pin screw terminal for 24 V DC;
4-pin screw terminal for digital
input and output; manual
on CD-ROM;
German/English
RJ45 plug connector for Industrial
Ethernet (10/100/1000 Mbit/s)
with a rugged metal enclosure
and integrated insulation
displacement contacts for
connecting Industrial Ethernet FC
installation cables;
180° cable outlet;
for network components and
CPs/CPUs with Industrial Ethernet
interface
• 1 pack = 1 unit
• 1 pack = 10 units
• 1 pack = 50 units
6GK1 901-1BB11-2AA0
6GK1 901-1BB11-2AB0
6GK1 901-1BB11-2AE0
IE FC Standard Cable GP 4 x 2
6XV1 878-2A
SCALANCE W748-1 RJ45
8-core, shielded TP installation
cable for connection to
IE FC RJ45 Plug 4 x 2 and
IE M12 Plug PRO 4 x 2;
PROFINET-compliant;
with UL approval;
sold by the meter;
max. length 1000 m,
minimum order 20 m
For administration of the radio link
of up to eight devices with
Industrial Ethernet connection;
IP30 degree of protection
• National approvals for operation
outside the USA
• National approvals for operation
within the USA1)
6GK5 748-1FC00-0AA0
6GK5 748-1FC00-0AB0
IE FC Stripping Tool
Accessories
C-PLUG
6GK1 900-0AB00
Swap medium for simple
replacement of devices in the
event of a fault;
for storing configuration data;
can be used in SIMATIC NET
products with PLUG slot
DIN rail mounting adapter
6GK1 901-1GA00
Preadjusted stripping tool
for fast stripping of the
Industrial Ethernet FC cables
Antennas and miscellaneous
IWLAN accessories
See Industrial Wireless LAN/
accessories
6GK5 798-8ML00-0AB3
DIN rail mounting adapter for
SCALANCE W788 M12 and
SCALANCE W788 RJ45;
screw fixing for mounting on a
35 mm DIN rail to EN 50 022;
scope of supply: 3 units per pack
1)
Please note national approvals at
www.siemens.com/wireless-approvals
8
■ More information
Wireless approvals:
Current approvals can be found on the Internet at:
www.siemens.com/wireless-approvals
To assist in selecting the right products for Industrial Wireless
Communication, the SIMATIC NET Selection Tool is available:
Online version:
www.siemens.com/snst
Offline version:
www.siemens.com/snst-download
Siemens IK PI · 2012
8/109
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11n
SCALANCE W748 M12 for use in the indoor area
■ Overview
• Particularly suitable for industrial applications without
control cabinets
■ Application
6
5DGLRFHOO
5DGLRFHOO
,QGXVWULDO(WKHUQHW
)LHOG3*
1RWHERRN
$FFHVV3RLQW
6&$/$1&(
:0
$FFHVV3RLQW
6&$/$1&(
:0
6,0$7,&+0,
8
&OLHQW0RGXOH
6&$/$1&(
:5-
6,0$7,&+0,
3&
6&$/$1&(b
;
3&
&OLHQW0RGXOH
6&$/$1&(
:5-
6,0$7,&+0,
6&$/$1&(b
;
3&
6&$/$1&(
;
6
6
$XWRPDWHG*XLGHG9HKLFOH6\VWHP$*96
Mobile controls in an automated guided vehicle system
The controllers register via the Ethernet Client Modules
W748-1 M12 in the wireless field and can move around freely
there. This makes it possible to operate an automated guided
vehicle system, for example.
8/110
Siemens IK PI · 2012
6,0$7,&+0,
6
*B,.B;;B
&OLHQW0RGXOH
6&$/$1&(
:5-
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11n
SCALANCE W748 M12 for use in the indoor area
■ Design
■ Technical specifications
• Rugged aluminum enclosure, shock and vibration-proof,
for high mechanical requirements
• High IP65 degree of protection against dust and water jets
• For use at ambient temperatures from -20 °C to +60 °C
• Resistant to condensation
• 3 x N-Connect sockets for the connection of remote antennas
• Antenna placement optimized for the 3x3 MIMO technology;
the antennas do not interfere with each other when they are
mounted direct on the device
• 1 x M125 connection for 10/100/1000 Mbit/s with Power-overEthernet according to IEEE 802.3at Type 1 (corresponds to
IEEE 802.3af)
• 1 x M12 socket for energy supply (24 V DC)
• 1 x PLUG slot
• Function LEDs for optical signaling of faults and operating
states
• Mounting: Wall, S7 mounting rail or on 35 mm standard
mounting rail
3x N-Connect (female) connections for antennas
Order No.
6GK5 748-1GD00-0AA0
6GK5 748-1GD00-0AB0 1)
Product type designation
SCALANCE W748-1 M12
Transmission rate
Transmission rate
• with W-LAN, maximum
• with Industrial Ethernet
• Note
450 Mbit/s
10 … 1 000 Mbit/s
-
Interfaces
Number of electrical connections
• for network components or
terminal equipment
• for power supply
• for redundant power supply
Design of electrical connection
• for network components or
terminal equipment
• for power supply
1
1
1
M12 interface (8-pin, A-coded),
PoE
M12 interface (4-pin, A-coded),
PoE
Number of optical connections for
fiber-optic cables at 100 Mbit/s
-
Design of optical connection for
fiber-optic cables at 100 Mbit/s
-
Design of swap medium C-Plug
Yes
Interfaces wireless
Number of permanently installed
wireless cards
1
Number of internal antennas
-
Number of electrical connections
for external antenna(s)
3
Design of electrical connection for
external antenna(s)
N-Connect female
24 V DC
connection
PLUG slot
M12 connection
(Gigabit)
*B,.B;;B
Supply voltage,
current consumption, power loss
Design and interfaces of the SCALANCE W748-1 M12 Client Modules
Product versions
SCALANCE W748-1 M12
• A wireless card permanently installed in the device;
for managing the wireless connection of up to eight connected
devices
Type of power supply
Power supply
• 1 from M12 power connector
(A-coded) for redundant power
supply
• 2 from M12 power connector
(A-coded) for redundant power
supply
• From Power-over-Ethernet
according to IEEE802.3at
for Type 1 and IEEE802.3af
• From Power-over-Ethernet
according to IEEE802.3at
for Type 2
DC
8
19.2 V
28.8 V
48 V
48 V
Permissible ambient conditions
Ambient temperature
• During operation
• During storage
• During transport
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
Relative humidity at 25 °C without
condensation during operation,
maximum
100 %
IP degree of protection
IP65
Ambient conditions for operation
-
1)
Wireless approval in the USA
Siemens IK PI · 2012
8/111
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11n
SCALANCE W748 M12 for use in the indoor area
■ Technical specifications (continued)
Order No.
6GK5 748-1GD00-0AA0
6GK5 748-1GD00-0AB0 1)
Product type designation
SCALANCE W748-1 M12
Design, dimensions and weights
Width of enclosure without antenna
200 mm
Height of enclosure without antenna
176 mm
Depth of enclosure without antenna
79 mm
Net weight
1.7 kg
Type of mounting: wall mounting
Yes
Type of mounting
S7-300 rail mounting
Wireless frequencies
Wireless frequency
• With WLAN in the 2.4 GHz
frequency band
• With WLAN in the 5 GHz
frequency band
2.41 … 2.48 GHz
4.9 … 5.8 GHz
Product properties,
functions, components
General
Number of SSIDs
Product function
• Dual client
• iHOP
• iPCF
• iPCF-MC
Number of iPCF-capable
radio modules
8
Product function
• CLI
• Web-based management
• MIB support
• TRAPs via e-mail
• Configuration with STEP 7
• Configuration with STEP 7 in the
TIA Portal
• SMTP server
• Operation with IWLAN controller
• Operation with Enterasys WLAN
controller
• Forced roaming with IWLAN
• WDS
6GK5 748-1GD00-0AA0
6GK5 748-1GD00-0AB0 1)
Product type designation
SCALANCE W748-1 M12
Protocol is supported
• Address Resolution Protocol
(ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
Identification & maintenance
• I&M0 - device-specific
information
• I&M1 - higher-level designation/
location designation
1
Product functions Diagnostics
-
Product function
• PROFINET IO diagnostics
• Link check
• Connection monitoring IP-Alive
• Localization by means of
Aeroscout
• SysLog
-
Product function VLAN with IWLAN
Wireless approval in the USA
8/112
Siemens IK PI · 2012
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
Yes
No
Product functions DHCP
8
Product function DHCP client
Yes
Product functions Redundancy
Yes
Yes
Yes
Yes
No
No
Yes
No
No
STP/RSTP protocol is supported
No
Product functions Security
Product function
• ACL – MAC based
• IEEE 802.1x (radius)
• NAT/NAPT
• Access protection according to
IEEE802.11i
• WPA/WPA2
• TKIP/AES
Protocol is supported SSH
No
Yes
Yes
Yes
Yes
Yes
Yes
Product functions Time
SNTP protocol is supported
1)
Yes
Product functions VLAN
Product functions
Management, configuration,
programming
Number of manageable IP
addresses in the client
Order No.
Yes
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11n
SCALANCE W748 M12 for use in the indoor area
■ Technical specifications (continued)
Order No.
6GK5 748-1GD00-0AA0
6GK5 748-1GD00-0AB0 1)
Product type designation
SCALANCE W748-1 M12
Standards, specifications,
approvals
Standard
• for EMC of FM
• for hazardous zone
• for CSA and UL safety
• for hazardous zone of CSA
and UL
Certificate of suitability
• CE marking
• EC Declaration of Conformity
• C-Tick
• CCC
• Railroad application
according to EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet
according to IEEE802.3at
for Type 1 and IEEE802.3af
• Power-over-Ethernet according
to IEEE802.3at for Type 2
Standard for wireless
communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Wireless approval
Marine classification association
• American Bureau of Shipping
Europe Ltd. (ABS)
• Bureau Veritas (BV)
• Det Norske Veritas (DNV)
• Germanischer Lloyd (GL)
• Lloyds Register of Shipping (LRS)
• Nippon Kaiji Kyokai (NK)
• Polski Rejestr Statkow (PRS)
UL 60950-1 CSA C22.2
No. 60950-1
-
■ Ordering data
Order No.
SCALANCE W748 Client Modules
IWLAN Ethernet Client Modules
with built-in wireless interface;
wireless networks
IEEE 802.11a/b/g/h/n
at 2.4/5 GHz up to 450 Mbit/s;
WPA2/AES;
Power over Ethernet (PoE),
IP65 degree of protection
(-20 °C to +60 °C);
scope of delivery:
Mounting hardware;
manual on CD-ROM,
German/English
SCALANCE W748-1 M12
Yes
Yes
Yes
No
No
No
No
No
Yes
for managing of the wireless
connection of up to eight linked
devices with Industrial Ethernet
connection
• National approvals for operation
outside the USA
• National approvals for operation
within the USA1)
1)
6GK5 748-1GD00-0AA0
6GK5 748-1GD00-0AB0
Please note national approvals at
www.siemens.com/wireless-approvals
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
You can find the latest list of
countries at: www.siemens.com/
simatic-net/ik-info
8
No
No
No
No
No
No
No
Accessories
Accessories
1)
-
Wireless approval in the USA
Siemens IK PI · 2012
8/113
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11n
SCALANCE W748 M12 for use in the indoor area
■ Ordering data
Order No.
C-PLUG
6GK1 900-0AB00
Swap medium for simple
replacement of devices
in the event of a fault;
for storing configuration data;
can be used in SIMATIC NET
products with PLUG slot
DIN rail mounting adapter
Online version:
www.siemens.com/snst
6GK5 798-8ML00-0AB3
IE FC M12 Plug PRO 4 x 2
M12 plug-in connector suitable
for on-site assembly (X-coded,
IP65/IP67), metal enclosure,
insulation/displacement
fast connection method,
for SCALANCE W
• 1 unit
• 8 units
6GK1 901-0DB30-6AA0
6GK1 901-0DB30-6AA8
IE FC Standard Cable GP 4 x 2
6XV1 878-2A
8-core, shielded TP installation
cable for connection to
IE FC RJ45 Plug 4 x 2 and
IE M12 Plug PRO 4 x 2;
PROFINET-compliant;
with UL approval;
sold by the meter;
max. length 1000 m,
minimum order 20 m
IE FC Stripping Tool
6GK1 901-1GA00
Preadjusted stripping tool
for fast stripping of the
Industrial Ethernet FC cables
Antennas and miscellaneous
IWLAN accessories
8
Siemens IK PI · 2012
Current approvals can be found on the Internet at:
www.siemens.com/wireless-approvals
To assist in selecting the right products for Industrial Wireless
Communication, the SIMATIC NET Selection Tool is available:
DIN rail mounting adapter for
SCALANCE W788 M12 and
SCALANCE W788 RJ45;
screw fixing for mounting on a
35 mm DIN rail to EN 50 022;
scope of supply: 3 units per pack
8/114
■ More information
Wireless approvals:
Accessories
See Industrial Wireless LAN/
accessories
Offline version:
www.siemens.com/snst-download
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11a/b/g
Overview
■ Overview
■ Benefits
• Predictable data traffic (strict real-time requirements) and
defined response times on the wireless link
• Reliable wireless link, e.g. due to redundant connection and
cyclic monitoring of the wireless path
• Cost savings due to one single radio network both for
process-critical data and for non-critical communication
• Investment security because all products are compatible with
the internationally recognized WLAN standard IEEE 802.11,
suitable for the unlicensed frequency bands of 2.4 GHz and
5 GHz (ISM bands)
• Reduced operating costs, because there is no wear of rotating
and moving plant sections
• Cost-effective connection to devices which are remote,
difficult to access or in hostile environments
The Ethernet Client Modules from the SCALANCE W740 product
line are optimal for integrating Industrial Ethernet stations into
Industrial Wireless LANs (IWLANs) for 2.4 GHz and 5 GHz with
transmission rates of up to 54 Mbit/s.
• Suitable for any application:
- SCALANCE W74x-1 for installation in a cabinet or integration
in devices
- SCALANCE W74x-1PRO for cabinet-free installation
• Reliable thanks to rugged housing, protected from water and
dust (IP65), resistant to shock, vibration and electromagnetic
fields
• Approved for operation in hazardous areas in Zone 2
• Demanding applications with real-time and redundancy
requirements, such as PROFINET with PROFIsafe
• In conformance with standards, as it supports IEEE 802.11;
additional functional expansions with software functions,
especially for applications demanding high reliability, e.g.
channel hopping procedure (iHOP), cyclic real-time data
traffic, and very high-speed roaming (iPCF)
• The SINEMA E engineering tool, wizards and online help
support planning, simulation, configuration, site survey and
documentation; easy management with the web server and
SNMP
• Quick commissioning of Client Modules with the optional
swap medium PRESET-PLUG and quick device exchange
in case of faults with the optional swap medium C-PLUG
(Configuration Plug)
■ Application
The Client Modules of the SCALANCE W740 product line are
designed for indoor and outdoor industrial applications as well
as for low-cost integration in control cabinets. They provide a
reliable radio link, which will transfer quickly from one Access
Point to the next (roaming). In this manner, processes can be
monitored and production failures through machine downtimes
avoided. In addition, Industrial Wireless LAN (IWLAN) can be
used in time-critical applications associated with production
automation (PROFINET IO) or for safety-related signals
(PROFIsafe).
The client modules with high IP65 degree of protection and
extended temperature range from -20 to +60 °C are especially
suitable for use outdoors. SCALANCE W products are siliconefree and can therefore also be used in paint shops.
The client modules with IP30 degree of protection are especially
suitable for use in automated guided vehicle systems or
suspended monorails.
When using the RCoax cable (radiating cable), operation
is particularly reliable in conveying technology and all track
applications (e.g. storage and retrieval systems).
Application examples:
• Automated guided vehicle systems (AGVS) and suspended
monorails;
prevention of wear and high flexibility in the choice of route
thanks to wireless transmission of data to the vehicles
• Cranes;
high flexibility through access to data communication with the
moving unit independent of the location
• Communication with moving stations (e.g. mobile controls and
devices), container logistics, storage and retrieval machines,
conveyor systems, conveyor belts, rotating machines, trucks
• Wireless coupling of communication segments and bridging
of large distances for fast commissioning and for costeffective networks in which cable routing would be extremely
expensive (e.g. on public roads, rivers, lakes, train lines)
Siemens IK PI · 2012
8/115
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11a/b/g
Overview
■ Design
• Wireless card (compatible with IEEE 802.11a/b/g/h)
permanently installed in the device
• Designed without rotating parts (e.g. operation without fans)
• Antennas can be connected via screw-type connection
(R-SMA)
• Function LEDs for optical signaling of faults and operating
states
• 1 x C-PLUG-/PRESET-PLUG slot
■ Function
Infrastructure mode
SCALANCE W740 Client Modules make it possible for a station
with an Industrial Ethernet interface (e.g. a controller) to move
seamlessly and with no wear in an Industrial Wireless LAN
wireless field. The station registers in the wireless field via the
Ethernet Client Module and can exchange information with
the entire data network. If the Ethernet Client Module moves,
for example, on an automated guided vehicle system, it is
automatically and transparently transferred from one access
point to the next (roaming).
This is possible over distances of up to 30 m indoors (approx.
100 m outdoors). Directional additional antennas can be used
outdoors to achieve ranges of several thousand meters.
Apart from a reliable wireless connection, the SCALANCE W740
Client Modules are characterized by excellent support from IT
mechanisms:
• IEEE 802.11 a/b/g for different frequency ranges
• IEEE 802.11h for use in the 5 GHz frequency range outdoors
• IEEE802.11e für multimedia, wireless multimedia (WMM)
• IEEE802.11i for security
• Selectable operation of infrastructure- and Ad-Hoc modes
• Sending the log entries of the SCALANCE W devices to a
Syslog server
• Modern security mechanisms (e.g. network security such as
IEEE 802.1x, RADIUS, EAP mechanisms)
• Network and Port Address Translation (NAT/PAT) (mapping of
private IP addresses and ports onto public addresses)
Security
A high degree of data security is achieved by means of the
WPA2/IEEE 802.11i mechanisms. These define modern procedures that control a regular exchange of the complete 128-bit
code as well as performing the access check (authentication) of
a station. The Advanced Encryption Standard (AES) is available
for data encryption. All encryption mechanisms are integrated in
the products and do not incur any additional costs.
Access to the devices (HTTPS) is encrypted and secure logon
(SSH) is possible. If a security concept with Virtual Private
Networks (VPN) or the SCALANCE S range is required, the
products can be integrated without any difficulty.
Functional scope
SCALANCE W744-1PRO and SCALANCE W744-1 can administer one single IP address, namely that of the connected device.
They establish a wireless connection precisely from this mobile
device to the wireless network. If the connected device is
replaced, the Ethernet Client Module recognizes this automatically, and registers the new address. This reduces plant
downtimes and sources of error.
The SCALANCE W746-1PRO and SCALANCE W746-1 Ethernet
Client Modules can administer the wireless connection for
up to eight devices with an Ethernet interface. It is possible to
integrate mobile units with a small Ethernet network (up to eight
devices) into an IWLAN wireless field.
DHCP
server
PC
PROFINET
Industrial Ethernet
SCALANCE
W786-1PRO
Antenna
ANT795-6MN
Antenna
ANT795-6MN
Control cabinet
Control cabinet
SCALANCE
W746-1
DHCP-capable
terminals
DHCP-capable
terminals
SCALANCE
XF208
SCALANCE W746-1
with integrated
DHCP server
SCALANCE
XF208
SIMATIC HMI
SIMATIC HMI
S7-300 with
CP 343-1
S7-300
with CP
343-1
Assignment of an IP address via DHCP by a central DHCP server
Assignment of an IP address by an DHCP server in the IWLAN client module
Assignment of dynamic IP addresses to wirelessly connected stations by a central DHCP server or integrated DHCP server
of an IWLAN client module
8/116
Siemens IK PI · 2012
G_IK10_XX_30231
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11a/b/g
Overview
■ Function (continued)
iFeatures (only for SCALANCE W747-1RR and W747-1)
iPCF-MC (iPCF Management Channel)
iPCF (industrial Point Coordination Function)
iPCF-MC is available as further development of iPCF. This mode
should be used if IWLAN stations that also support iPCF-MC
(e.g. Client Modules SCALANCE W747-1RR, Mobile Panel 277F
IWLAN) move freely about in the coverage area (especially
when using omni-directional antennas) and are to exchange
data deterministically. This functionality can only be implemented in combination with RR Access Point versions with at
least two radio interfaces.
The iPCF mode is recommended for applications with a
requirement for real-time and predictable response times
(deterministic response), even during roaming of moving
stations from one access point to the next. This ensures that
wireless PROFINET IO is supported and that safety-related
signals, e.g. emergency stop, can be integrated into the wireless
link. This means that even video signals from moving stations
can be transmitted with a high level of quality.
The iPCF mechanism expands the IEEE 802.11 standard and
must be available on both the station and the access point
(e.g. SCALANCE W788-1RR). In a wireless field in which iPCF is
used, no IEEE 802.11-compliant stations can be operated.
Note:
Due to the lower bandwidth when using iPCF-MC,
we recommend the iPCF mode for transmitting video signals.
iPCF is recommended for applications where wireless network
nodes move along predefined paths (e.g. suspended monorail).
RCoax leaky wave cables or directional antennas must be used
for this purpose.
Note:
The IWLAN/PB Link PN IO gateway also supports iPCF
SIMATIC S7-300F
PROFINET with PROFIsafe
Radio cell 1
Radio cell 2
SCALANCE
W788-2RR
SCALANCE
W786-2RR
G_IK10_XX_30232
8
Mobile Panel 277F IWLAN
Interface 1: Data Channel
Interface 2: Management Channel
Roaming of a mobile panel between two access points while maintaining error-free communication with iPCF-MC
Siemens IK PI · 2012
8/117
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11a/b/g
Overview
■ Function (continued)
iHOP
With the supplementary function iHOP, the Access Point
changes the channel in coordination with its clients. If it detects
interferences which are caused, for example, by sporadically
active WLANs on a channel, it avoids the affected channel
temporarily. Hopping to the other channel is carried out so
rapidly that usually the application is not impaired by the
channel change. If the interferences occur throughout the
complete frequency band, it is even possible to change to
another frequency band (e.g. from 2.4 to 5 GHz). This
guarantees reliable communication even with interferences in
the wireless field.
IWLAN with iHOP on changing channels
Unknown WLANs on fixed channels (interrupter)
SCALANCE
W786-1RR
Access Point
2.4 GHz/
Channel 1
Hopping on the channels
1-13 (2.4 GHz) and
36-140 (5 GHz)
2.4 GHz/
Channel 6
SCALANCE
W747-1RR
Client Module
ANT795-6MN
Antenna
2.4 GHz/
Channel 10
5 GHz/
Channel 40
Automated guided vehicle
system
Machine with third-party
Access Point
Coordinated changing of channels by means of a channel hopping procedure (iHOP) to avoid disrupters
&KDQQHO+RSSLQJL+23
Time
Occupied radio channels
(Schematic diagram)
Channel A, partially occupied by
WLAN A
Channel B, partially occupied by
WLAN B
Channel C, partially occupied by
other radio system
Industrial Wireless LAN with channel hopping functionality (iHOP):
SCALANCE W Access Point and Client Module change radio channels in
a cyclic and coordinated manner and so boost reliability of communication
in environments heavily subjected to radio interference.
iHOP function for SCALANCE W Client Modules
8/118
Siemens IK PI · 2012
*B,.B;;B
8
Machine
G_IK10_XX_30230
SCALANCE W747-1
Client Module
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11a/b/g
Overview
■ Function (continued)
Dual Client
This function permits coupling of two Client Modules via an
Industrial Ethernet Switch (e.g. SCALANCE X-200). One client is
actively connected to an Access Point via IWLAN. The other
client is in standby mode and continuously searches for an
Access Point with better signal strength. If it finds one, its status
changes to active and the previously active client switches to
standby mode. Changeover between the clients is implemented
without interrupting communication (seamless roaming).
Radio cell 1, Channel 1
Radio cell 2, Channel 7
Access Point
SCALANCE
W786-1RR
Access Point
SCALANCE
W786-1RR
Active
Client
Passive
Client
Client Module
SCALANCE
W747-1RR
Industrial
Ethernet
Active
Client
Client Module
SCALANCE
W747-1RR
Train wagon 2
G_IK10_XX_30233
Train wagon 1
Passive
Client
Automated guided vehicle system $*96
Two linked IWLAN client modules form a dual client to enable uninterrupted roaming, e.g. for fast moving vehicles
Note:
These iFeatures cannot be used in parallel.
Diagnostics and management
• Web-based (HTTP/HTTPS) management tool for configuration
and diagnostics using a standard browser
• Planning, configuration, simulation and measurement of the
wireless field on site (Site Survey) with SINEMA E
• LEDs for signaling operating states and fault conditions
• Signaling of faults by means of SNMP trap or e-mail to a
network management tool, e.g. SINEMA-Server
8
Siemens IK PI · 2012
8/119
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11a/b/g
SCALANCE W740 for use in the control cabinet
■ Overview
• Especially suitable for applications where the client module
is to be mounted in the control cabinet
• Low-cost alternative for use indoors with less severe
environmental conditions
• The rugged aluminum enclosure with degree of protection
IP30 nevertheless provides protection against mechanical
and electromagnetic stress in industrial areas
■ Application
5DGLRFHOO
$FFHVV3RLQW
6&$/$1&(
:55
5&RD[&DEOH
$QWHQQD
$17'1
&OLHQW0RGXOH
6&$/$1&(:
Use of the Ethernet Client Modules in a suspended monorail
The mobile units of a suspended monorail, for example, are
linked to the IWLAN radio link via the Ethernet Client Modules
SCALANCE W747-1. This is implemented by means of the
SCALANCE W788-2RR Access Points and the RCoax cable.
The Ethernet Client Modules are mounted in cabinets because
of their mechanical characteristics.
8/120
Siemens IK PI · 2012
*B,.B;;B
+DQJHU
+DQJHU
+DQJHU
+DQJHU
)LHOG3*1RWHERRN
+DQJHU
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11a/b/g
SCALANCE W740 for use in the control cabinet
■ Design
• Low-profile, compact aluminum enclosure, shock and
vibration-proof for high mechanical requirements
• Dust protection with IP30 degree of protection
• For use at ambient temperatures from -20 °C to +60 °C
• Construction and design suitable for integration in a device
or for installation in a cabinet
• 2 x R-SMA sockets for the connection of remote antennas
• 1 x RJ45 connection for 10/100 Mbit/s with
Power-over-Ethernet according to IEEE 802.3at Type 1
(corresponds to IEEE 802.3af)
• 1 x 24 V DC connection for redundant power infeed
• 1 x C-PLUG slot
• Function LEDs for optical signaling of faults and operating
states
• Mounting: Wall or, with optional mounting set, on S7 mounting
rail, 35 mm standard mounting rail
Product versions
SCALANCE W744-1
• A wireless card permanently installed in the device;
for managing the wireless connection of a connected device
SCALANCE W746-1
• A wireless card permanently installed in the device
for managing the wireless connection of up to eight connected
devices
SCALANCE W747-1
• A wireless card permanently installed in the device
for managing the wireless connection with iPCF of up to eight
connected devices
C-PLUG
slot
24 V DC connection
RJ45 connection for 10/100 Mbit/s
(PoE capability acc. to IEEE 802.3af)
*B,.B;;B
2xRSMA connections
for antennas
8
Configuration and interfaces for Client Modules
SCALANCE W744-1, W746-1, W747-1
Siemens IK PI · 2012
8/121
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11a/b/g
SCALANCE W740 for use in the control cabinet
■ Technical specifications
Order No.
6GK5 744-1AA30-2AA0
6GK5 744-1AA30-2AB0 1)
6GK5 746-1AA30-4AA0
6GK5 746-1AA30-4AB0 1)
6GK5 747-1AA30-6AA0
6GK5 747-1AA30-6AB0 1)
Product type designation
SCALANCE W744-1
SCALANCE W746-1
SCALANCE W747-1
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous use of
several radio channels,
a transmission rate of 108 Mbit/s
is possible (turbo mode)
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous use of
several radio channels,
a transmission rate of 108 Mbit/s
is possible (turbo mode)
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous use of
several radio channels,
a transmission rate of 108 Mbit/s
is possible (turbo mode)
1
1
1
1
1
1
1
1
1
RJ45 socket
RJ45 socket
RJ45 socket
4-pin screw terminal, PoE
4-pin screw terminal, PoE
4-pin screw terminal, PoE
Yes
Yes
Yes
Number of permanently installed
wireless cards
1
1
1
Number of electrical connections
for external antenna(s)
2
2
2
Design of electrical connection for
external antenna(s)
R-SMA female (socket)
R-SMA female (socket)
R-SMA female (socket)
Transmission rate
Transmission rate
• with W-LAN, maximum
• with Industrial Ethernet
• Note
Interfaces
Number of electrical connections
• for network components or
terminal equipment
• for power supply
• for redundant power supply
Design of electrical connection
• for network components or
terminal equipment
• for power supply
Design of swap medium C-Plug
Interfaces wireless
Supply voltage,
current consumption, power loss
8
Type of power supply
DC
DC
DC
Power supply
• 1 from terminal block
• 2 from terminal block
• From Power-over-Ethernet
according to IEEE802.3at for
Type 1 and IEEE802.3af
24 V
48 V
48 V
24 V
48 V
48 V
24 V
48 V
48 V
Current consumed
• At 24 V DC, typical
• At 48 V DC, typical
• With Power-over-Ethernet
according to IEEE802.3at for
Type 1 and IEEE802.3af, typical
0.23 A
0.12 A
0.12 A
0.23 A
0.12 A
0.12 A
0.23 A
0.12 A
0.12 A
Effective power loss
• At 24 V DC, typical
• At 48 V DC, typical
• With Power-over-Ethernet
according to IEEE802.3at for
Type 1 and IEEE802.3af, typical
6W
6W
6W
6W
6W
6W
6W
6W
6W
1)
Wireless approval in the USA
8/122
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11a/b/g
SCALANCE W740 for use in the control cabinet
■ Technical specifications (continued)
Order No.
6GK5 744-1AA30-2AA0
6GK5 744-1AA30-2AB0 1)
6GK5 746-1AA30-4AA0
6GK5 746-1AA30-4AB0 1)
6GK5 747-1AA30-6AA0
6GK5 747-1AA30-6AB0 1)
Product type designation
SCALANCE W744-1
SCALANCE W746-1
SCALANCE W747-1
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
Relative humidity at 25 °C without
condensation during operation,
maximum
90 %
90 %
90 %
IP degree of protection
IP30
IP30
IP30
Ambient conditions for operation
-
-
-
Permissible ambient conditions
Ambient temperature
• During operation
• During storage
• During transport
Design, dimensions and weights
100 mm
100 mm
100 mm
Height of enclosure without antenna 205 mm
Width of enclosure without antenna
205 mm
205 mm
Depth of enclosure without antenna
20 mm
20 mm
20 mm
Net weight
0.29 kg
0.29 kg
0.29 kg
Type of mounting
• S7-300 rail mounting
• Wall mounting
Yes
Yes
Yes
For mounting on 35 mm DIN rail
and S7-300 rail, an additional
adapter plate is required
For mounting on 35 mm DIN rail
and S7-300 rail, an additional
adapter plate is required
For mounting on 35 mm DIN rail
and S7-300 rail, an additional
adapter plate is required
2.41 … 2.48 GHz
2.41 … 2.48 GHz
2.41 … 2.48 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
Number of SSIDs
1
1
1
Product function
• Dual client
• iHOP
• iPCF
• iPCF-MC
No
No
No
No
No
No
No
No
Yes
Yes
No
Yes
0
0
1
1
8
8
Yes
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
No
No
Yes
No
No
No
No
No
No
No
No
No
No
No
Type of mounting
Wireless frequencies
Wireless frequency
• With WLAN in the 2.4 GHz
frequency band
• With WLAN in the 5 GHz
frequency band
Product properties,
functions, components
General
Number of iPCF-capable
radio modules
8
Product functions
Management, configuration,
programming
Number of manageable
IP addresses in the client
Product function
• CLI
• Web-based management
• MIB support
• TRAPs via e-mail
• Configuration with STEP 7
• Configuration with STEP 7 in the
TIA Portal
• SMTP server
• Operation with IWLAN controller
• Operation with Enterasys WLAN
controller
• iQoS
• Forced roaming with IWLAN
• WDS
1)
Wireless approval in the USA
Siemens IK PI · 2012
8/123
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11a/b/g
SCALANCE W740 for use in the control cabinet
■ Technical specifications (continued)
Order No.
6GK5 744-1AA30-2AA0
6GK5 744-1AA30-2AB0 1)
6GK5 746-1AA30-4AA0
6GK5 746-1AA30-4AB0 1)
6GK5 747-1AA30-6AA0
6GK5 747-1AA30-6AB0 1)
Product type designation
SCALANCE W744-1
SCALANCE W746-1
SCALANCE W747-1
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
Yes
No
No
No
Yes
No
No
No
Yes
Yes
Yes
No
No
No
Yes
Yes
Yes
-
-
-
No
Yes
No
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Protocol is supported
• Address Resolution Protocol
(ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
Identification & maintenance
• I&M0 – device-specific
information
• I&M1 – higher-level
designation/location designation
Product functions Diagnostics
Product function
• PROFINET IO diagnostics
• Link check
• Connection monitoring IP-Alive
• Localization by means of
Aeroscout
• SysLog
Product functions VLAN
Product function VLAN with IWLAN
Product functions DHCP
Product function DHCP client
Product functions Redundancy
STP/RSTP protocol is supported
Product functions Security
8
Product function
• ACL - MAC based
• IEEE 802.1x (radius)
• NAT/NAPT
• Access protection
according to IEEE802.11i
• WPA/WPA2
• TKIP/AES
Protocol is supported SSH
Product functionsTime
SNTP protocol is supported
1)
Wireless approval in the USA
8/124
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11a/b/g
SCALANCE W740 for use in the control cabinet
■ Technical specifications (continued)
Order No.
6GK5 744-1AA30-2AA0
6GK5 744-1AA30-2AB0 1)
6GK5 746-1AA30-4AA0
6GK5 746-1AA30-4AB0 1)
6GK5 747-1AA30-6AA0
6GK5 747-1AA30-6AB0 1)
Product type designation
SCALANCE W744-1
SCALANCE W746-1
SCALANCE W747-1
FM 3611: Class I, Division 2,
Groups A,B,C,D, T4 / Class 1,
Zone 2, Group IIC, T4
EN 60079-15:2005,
EN 60079-0:2006, II 3 G Ex nA II
T4 KEMA 07 ATEX 0145X
(only approved in connection with
an enclosure with degree of
protection of at least IP 54)
UL 60950-1 CSA C22.2
No. 60950-1
ISA 12.12.01-2000, CSA C22.2
No. 213-M1987, CL. 1, Div. 2, GP.
A,B,C,D, T4 / CL. 1, Zone 2, GP IIC,
T4 / CL. 1, Zone 2, AEx nC IIC, T4
(only approved in connection with
an enclosure with degree of
protection of at least IP 54)
FM 3611: Class I, Division 2,
Groups A,B,C,D, T4 / Class 1,
Zone 2, Group IIC, T4
EN 60079-15:2005,
EN 60079-0:2006, II 3 G Ex nA II T4
KEMA 07 ATEX 0145X
(only approved in connection with
an enclosure with degree of
protection of at least IP 54)
UL 60950-1 CSA C22.2
No. 60950-1
ISA 12.12.01-2000, CSA C22.2
No. 213-M1987, CL. 1, Div. 2, GP.
A,B,C,D, T4 / CL. 1, Zone 2, GP IIC,
T4 / CL. 1, Zone 2, AEx nC IIC, T4
(only approved in connection with
an enclosure with degree of
protection of at least IP 54)
FM 3611: Class I, Division 2,
Groups A,B,C,D, T4 / Class 1,
Zone 2, Group IIC, T4
EN 60079-15:2005,
EN 60079-0:2006, II 3 G Ex nA II T4
KEMA 07 ATEX 0145X
(only approved in connection with
an enclosure with degree of
protection of at least IP 54)
UL 60950-1 CSA C22.2
No. 60950-1
ISA 12.12.01-2000, CSA C22.2
No. 213-M1987, CL. 1, Div. 2, GP.
A,B,C,D, T4 / CL. 1, Zone 2, GP IIC,
T4 / CL. 1, Zone 2, AEx nC IIC, T4
(only approved in connection with
an enclosure with degree of
protection of at least IP 54)
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
No
You can find the latest list of
countries at: www.siemens.com/
simatic-net/ik-info
You can find the latest list of
countries at: www.siemens.com/
simatic-net/ik-info
You can find the latest list of
countries at: www.siemens.com/
simatic-net/ik-info
Yes
No
No
Yes
No
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
No
24 V DC screw terminal included
in scope of delivery
24 V DC screw terminal included
in scope of delivery
24 V DC screw terminal included
in scope of delivery
Standards, specifications,
approvals
Standard
• for EMC of FM
• for hazardous zone
• for CSA and UL safety
• for hazardous zone of CSA
and UL
Certificate of suitability
• CE marking
• EC Declaration of Conformity
• C-Tick
• CCC
• Railroad application according to
EN 50155
• e1 approval
• E1 approval
• Power-over-Ethernet according to
IEEE802.3at for Type 1 and
IEEE802.3af
Standard for wireless communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Wireless approval
Marine classification association
• American Bureau of Shipping
Europe Ltd. (ABS)
• Bureau Veritas (BV)
• Det Norske Veritas (DNV)
• Germanischer Lloyd (GL)
• Lloyds Register of Shipping (LRS)
• Nippon Kaiji Kyokai (NK)
• Polski Rejestr Statkow (PRS)
8
Accessories
Accessories
1)
Wireless approval in the USA
Siemens IK PI · 2012
8/125
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11a/b/g
SCALANCE W740 for use in the control cabinet
■ Ordering data
Order No.
Accessories
IWLAN Ethernet Client Modules
with built-in radio interface;
radio networks
IEEE 802.11a/b/g/h at 2.4/5 GHz
to 54 Mbit/s; WPA/AES;
Power over Ethernet (PoE)
mounting hardware;
4-pin screw terminal for 24 V DC;
manual on CD-ROM,
German/English
C-PLUG
For administration of the radio link
of one device with Industrial
Ethernet connection;
IP30 degree of protection
• National approvals for operation
outside the USA
• National approvals for operation
within the USA1)
6GK5 744-1AA30-2AA0
6GK5 744-1AA30-2AB0
SCALANCE W746-1
For administration of the radio link
of up to eight devices with
Industrial Ethernet connection;
IP30 degree of protection
• National approvals for operation
outside the USA
• National approvals for operation
within the USA1)
6GK5 746-1AA30-4AA0
6GK5 746-1AA30-4AB0
SCALANCE W747-1
For administration of the radio link
with iPCF of up to eight devices
with Industrial Ethernet
connection; IP30 degree of
protection
• National approvals for operation
outside the USA
• National approvals for operation
within the USA1)
1)
6GK5 747-1AA30-6AA0
6GK5 747-1AA30-6AB0
Please note national approvals at
www.siemens.com/wireless-approvals
8/126
Siemens IK PI · 2012
Swap medium for simple
replacement of devices in the
event of a fault;
for storing configuration data;
can be used in SIMATIC NET
products with PLUG slot
6GK1 900-0AB00
PRESET-PLUG
6GK5 798-8AB00
Swap medium for simple initial
startup of SCALANCE W access
points and client modules,
as well as IWLAN/PB Link PN IO
SCALANCE W744-1
8
Order No.
SCALANCE W740 Client Modules
SIMATIC Mobile Panel 277F
IWLAN
• Communication via WLAN
(PROFINET)
with acknowledgement button
and emergency stop button
• Communication via WLAN
(PROFINET)
with acknowledgment button
and emergency stop button
with integrated handwheel,
key-operated switch, and two
illuminated pushbuttons
Note:
Please also order the desktop
power supply or battery charger!
• Table-top power supply incl.
power cable for EU, US, UK, JP
(only suitable for operation
under laboratory/office conditions)
• Charger for safe storage and
charging the device incl. lock for
securing the device in the
charger. Charging capabilities
for up to two additional batteries
• Additional battery with LED
indicator for indicating the
charge status
• Transponder incl. batteries
(3x AA)
6AV6 645-0DB01-0AX0
6AV6 645-0DC01-0AX0
6AV6 671-5CN00-0AX1
6AV6 671-5CE00-0AX0
6AV6 671-5CL00-0AX0
6AV6 671-5CM00-0AX0
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11a/b/g
SCALANCE W740 for use in the control cabinet
■ Ordering data
Order No.
■ More information
Accessories (continued)
Wireless approvals:
IE FC RJ45 Plug 180 2x2
Current approvals can be found on the Internet at:
www.siemens.com/wireless-approvals
RJ45 plug connector for Industrial
Ethernet with a rugged metal
enclosure and integrated
insulation-displacement contacts
for connecting Industrial Ethernet
FC installation cables;
with a 180° cable outlet;
for network components and
CPs/CPUs with Industrial Ethernet
interface
• 1 pack = 1 unit
• 1 pack = 10 units
• 1 pack = 50 units
6GK1 901-1BB10-2AA0
6GK1 901-1BB10-2AB0
6GK1 901-1BB10-2AE0
IE FC Standard Cable GP 2 x 2
6XV1 840-2AH10
To assist in selecting the right products for Industrial Wireless
Communication, the SIMATIC NET Selection Tool is available:
Online version:
www.siemens.com/snst
Offline version:
www.siemens.com/snst-download
4-core, shielded TP installation
cable for connection to IE
FC Outlet RJ45/ E FC RJ45 Plug;
PROFINET-compliant;
with UL approval;
sold by the meter;
max. length 1000 m,
minimum order 20 m
IE FC Stripping Tool
6GK1 901-1GA00
Preadjusted stripping tool
for fast stripping of the
Industrial Ethernet FC cables
IE TP Cord RJ45/RJ45
TP cable 4 x 2
with 2 RJ45 connectors
• 0.5 m
•1m
•2m
•6m
• 10 m
6XV1 870-3QE50
6XV1 870-3QH10
6XV1 870-3QH20
6XV1 870-3QH60
6XV1 870-3QN10
MS2 mounting set
6GK5 798-8MJ00-0AA0
Mounting set for fixing the
SCALANCE W784 products onto
an S7-300 mounting rail or a
35 mm standard DIN rail
Antennas and miscellaneous
IWLAN accessories
8
See Industrial Wireless LAN/
accessories
Siemens IK PI · 2012
8/127
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11a/b/g
SCALANCE W740 for use in the indoor area
■ Overview
• Particularly suitable for industrial applications without
control cabinets.
■ Application
6ZLWK
&3
2SHUDWRUFRQWURO
PRQLWRULQJ
,QGXVWULDO(WKHUQHW
$FFHVV3RLQW
6&$/$1&(
:352
6
&OLHQW0RGXOH
6&$/$1&(
:352
&OLHQW0RGXOH
6&$/$1&(
:352
$XWRPDWHGJXLGHGYHKLFOHV\VWHP$*96
Mobile controls in an automated guided vehicle system
The controllers register via the Ethernet Client Modules
W746-1PRO in the radio link and can move around freely there.
This makes it possible to operate an automated guided vehicle
system, for example.
8/128
Siemens IK PI · 2012
)LHOG3*
1RWHERRN
*B,.B;;B
6
8
$FFHVV3RLQW
6&$/$1&(
:352
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11a/b/g
SCALANCE W740 for use in the indoor area
■ Design
• Rugged metal enclosure, shock and vibration-proof for high
mechanical requirements in industrial applications designed
without cabinets
• High IP65 degree of protection against dust and water jets
• For use at ambient temperatures from -20 °C to +60 °C
• Resistant to condensation
• 2 x R-SMA sockets for the connection of remote antennas
(4 x R-SMA for the versions with two radio modules)
• 1 x hybrid socket for data and energy line for infeed
over the IE FC Modular Outlet or for supplying with
Power-over-Ethernet according to IEEE 802.3at Type 1
(corresponds to IEEE 802.3af)
• 1 x M12 socket for redundant power infeed
(18 to 32 V DC, 48 V DC), e.g. in conjunction with
the PS791-1PRO (90 to 265 V AC) power supply
• 1 x C-PLUG slot
• Function LEDs for optical signaling of faults and operating
states
• Mounting: Wall, S7-300 mounting rail (90 mm length, vertically
mounted, bolts included in scope of supply), or with optional
mounting aid on 35 mm DIN rail
Product versions
SCALANCE W744-1PRO
• A wireless card permanently installed in the device;
for managing the wireless connection of a connected device
SCALANCE W746-1PRO
• A wireless card permanently installed in the device;
for managing the wireless connection of up to eight connected
devices
SCALANCE W747-1RR
• For establishing wireless connections with iPCF;
a wireless card permanently installed in the device;
for managing the wireless connection of up to eight connected
devices
2x antennas,
detachable
back:
C-Plug
energy
hybrid
socket
wallmounting
10/100 Mbit/s
Industrial Ethernet
redundant
energy
8
G_IK10_XX_30020
protective
clip
Configuration and interfaces for Client Modules SCALANCE
W744-1PRO, W746-1PRO, W747-1RR
Siemens IK PI · 2012
8/129
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11a/b/g
SCALANCE W740 for use in the indoor area
■ Technical specifications
Order No.
6GK5 744-1AA60-2AA0
6GK5 744-1AA60-2AB0 1)
6GK5 746-1AA60-4AA0
6GK5 746-1AA60-4AB0 1)
6GK5 747-1AA60-6AA0
6GK5 747-1AA60-6AB0 1)
Product type designation
SCALANCE W744-1PRO
SCALANCE W746-1PRO
SCALANCE W747-1RR
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous use of
several radio channels,
a transmission rate of 108 Mbit/s
is possible (turbo mode)
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous use of
several radio channels,
a transmission rate of 108 Mbit/s
is possible (turbo mode)
54 Mbit/s
10 … 100 Mbit/s
Due to the simultaneous use of
several radio channels,
a transmission rate of 108 Mbit/s
is possible (turbo mode)
1
1
1
1
1
1
1
1
1
Hybrid socket, RJ45 integrated
Hybrid socket, RJ45 integrated
Hybrid socket, RJ45 integrated
M12 interface (4-pin, A-coded),
hybrid socket, PoE
M12 interface (4-pin, A-coded),
hybrid socket, PoE
M12 interface (4-pin, A-coded),
hybrid socket, PoE
Yes
Yes
Yes
Number of permanently installed
wireless cards
1
1
1
Number of electrical connections
for external antenna(s)
2
2
2
Design of electrical connection for
external antenna(s)
R-SMA female (socket)
R-SMA female (socket)
R-SMA female (socket)
DC
DC
DC
24 V
24 V
24 V
48 V
48 V
48 V
24 V
24 V
24 V
48 V
48 V
48 V
48 V
48 V
48 V
0.25 A
0.13 A
0.13 A
0.25 A
0.13 A
0.13 A
0.25 A
0.13 A
0.13 A
7W
7W
7W
7W
7W
7W
7W
7W
7W
Transmission rate
Transmission rate
• with W-LAN, maximum
• with Industrial Ethernet
• Note
Interfaces
Number of electrical connections
• for network components or
terminal equipment
• for power supply
• for redundant power supply
Design of electrical connection
• for network components or
terminal equipment
• for power supply
Design of swap medium C-Plug
Interfaceswireless
Supply voltage,
current consumption, power loss
Type of power supply
8
Supply voltage
• 1 from M12 power connector
(A-coded) for redundant
power supply
• 2 from M12 power connector
(A-coded) for redundant
power supply
• 1 from IE hybrid cable
2x2 + 4x0.34
• 2 from IE hybrid cable
2x2 + 4x0.34
• From Power-over-Ethernet
according to IEEE802.3at
for Type 1 and IEEE802.3af
Current consumed
• At 24 V DC, typical
• At 48 V DC, typical
• With Power-over-Ethernet
according to IEEE802.3at
for Type 1 and IEEE802.3af,
typical
Effective power loss
• At 24 V DC, typical
• At 48 V DC, typical
• With Power-over-Ethernet
according to IEEE802.3at
for Type 1 and IEEE802.3af,
typical
1)
Wireless approval in the USA
8/130
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11a/b/g
SCALANCE W740 for use in the indoor area
■ Technical specifications (continued)
Order No.
6GK5 744-1AA60-2AA0
6GK5 744-1AA60-2AB0 1)
6GK5 746-1AA60-4AA0
6GK5 746-1AA60-4AB0 1)
6GK5 747-1AA60-6AA0
6GK5 747-1AA60-6AB0 1)
Product type designation
SCALANCE W744-1PRO
SCALANCE W746-1PRO
SCALANCE W747-1RR
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
Relative humidity at 25 °C without
condensation during operation,
maximum
100 %
100 %
100 %
IP degree of protection
IP65
IP65
IP65
Ambient conditions for operation
When used under explosion
protection conditions (Zone 2),
the SCALANCE W788-xPRO/RR or
W74x-1PRO/RR product must be
installed in an enclosure that
complies at least with IP54
according to EN 60529 within the
scope of EN 50021.
When used under explosion
protection conditions (Zone 2),
the SCALANCE W788-xPRO/RR or
W74x-1PRO/RR product must be
installed in an enclosure that
complies at least with IP54
according to EN 60529 within the
scope of EN 50021.
When used under explosion
protection conditions (Zone 2),
the SCALANCE W788-xPRO/RR or
W74x-1PRO/RR product must be
installed in an enclosure that
complies at least with IP54
according to EN 60529 within the
scope of EN 50021.
Permissible ambient conditions
Ambient temperature
• During operation
• During storage
• During transport
Design, dimensions and weights
Width of enclosure without antenna
125 mm
125 mm
125 mm
Height of enclosure without antenna
88 mm
88 mm
88 mm
Depth of enclosure without antenna
108 mm
108 mm
108 mm
Net weight
1.05 kg
1.05 kg
1.05 kg
Type of mounting
• S7-300 rail mounting
• Wall mounting
Yes
Yes
Yes
Yes
Yes
Yes
2.41 … 2.48 GHz
2.41 … 2.48 GHz
2.41 … 2.48 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
Number of SSIDs
1
1
1
Product function
• Dual client
• iHOP
• iPCF
• iPCF-MC
No
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
0
0
1
Wireless frequencies
Wireless frequency
• With WLAN in the 2.4 GHz
frequency band
• With WLAN in the 5 GHz
frequency band
Product properties,
functions, components
General
Number of iPCF-capable
radio modules
1)
8
Wireless approval in the USA
Siemens IK PI · 2012
8/131
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11a/b/g
SCALANCE W740 for use in the indoor area
■ Technical specifications (continued)
Order No.
6GK5 744-1AA60-2AA0
6GK5 744-1AA60-2AB0 1)
6GK5 746-1AA60-4AA0
6GK5 746-1AA60-4AB0 1)
6GK5 747-1AA60-6AA0
6GK5 747-1AA60-6AB0 1)
Product type designation
SCALANCE W744-1PRO
SCALANCE W746-1PRO
SCALANCE W747-1RR
1
8
8
Yes
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
No
No
Yes
No
No
No
No
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
Yes
No
No
No
Yes
No
No
No
Yes
Yes
Yes
No
No
No
Yes
Yes
Yes
-
-
-
Product functions
Management, configuration,
programming
Number of manageable IP
addresses in the client
Product function
• CLI
• Web-based management
• MIB support
• TRAPs via e-mail
• Configuration with STEP 7
• Configuration with STEP 7 in the
TIA Portal
• SMTP server
• Operation with IWLAN controller
• Operation with Enterasys WLAN
controller
• iQoS
• Forced roaming with IWLAN
• WDS
Protocol is supported
• Address Resolution Protocol
(ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
8
Identification & maintenance
• I&M0 - device-specific
information
• I&M1 - higher-level designation/
location designation
Product functions Diagnostics
Product function
• PROFINET IO diagnostics
• Link check
• Connection monitoring IP-Alive
• Localization by means of
Aeroscout
• SysLog
Product functions VLAN
Product function VLAN with IWLAN
Product functions DHCP
Product function DHCP client
Product functions Redundancy
STP/RSTP protocol is supported
1)
Wireless approval in the USA
8/132
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11a/b/g
SCALANCE W740 for use in the indoor area
■ Technical specifications (continued)
Order No.
6GK5 744-1AA60-2AA0
6GK5 744-1AA60-2AB0 1)
6GK5 746-1AA60-4AA0
6GK5 746-1AA60-4AB0 1)
6GK5 747-1AA60-6AA0
6GK5 747-1AA60-6AB0 1)
Product type designation
SCALANCE W744-1PRO
SCALANCE W746-1PRO
SCALANCE W747-1RR
No
Yes
No
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
FM 3611: Class I, Division 2,
Groups A,B,C,D, T4 / Class 1,
Zone 2, Group IIC, T4
EN 60079-15:2005,
EN 60079-0:2006, II 3 G Ex nA II T4
KEMA 07 ATEX 0145X
UL 60950-1 CSA C22.2
No. 60950-1
ISA 12.12.01-2000, CSA C22.2
No. 213-M1987, CL. 1, Div. 2, GP.
A,B,C,D, T4 / CL. 1, Zone 2, GP IIC,
T4 / CL. 1, Zone 2, AEx nC IIC, T4
FM 3611: Class I, Division 2,
Groups A,B,C,D, T4 / Class 1,
Zone 2, Group IIC, T4
EN 60079-15:2005,
EN 60079-0:2006, II 3 G Ex nA II T4
KEMA 07 ATEX 0145X
UL 60950-1 CSA C22.2
No. 60950-1
ISA 12.12.01-2000, CSA C22.2
No. 213-M1987, CL. 1, Div. 2, GP.
A,B,C,D, T4 / CL. 1, Zone 2, GP IIC,
T4 / CL. 1, Zone 2, AEx nC IIC, T4
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
No
You can find the latest list of
countries at: www.siemens.com/
simatic-net/ik-info
You can find the latest list of
countries at: www.siemens.com/
simatic-net/ik-info
You can find the latest list of
countries at: www.siemens.com/
simatic-net/ik-info
Yes
No
No
Yes
No
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
No
2 antennas, hybrid connector
included in scope of delivery
2 antennas, hybrid connector
included in scope of delivery
2 antennas, hybrid connector
included in scope of delivery
Product functions Security
Product function
• ACL – MAC based
• IEEE 802.1x (radius)
• NAT/NAPT
• Access protection according to
IEEE802.11i
• WPA/WPA2
• TKIP/AES
Protocol is supported SSH
Product functions Time
SNTP protocol is supported
Standards, specifications,
approvals
Standard
• for EMC of FM
FM 3611: Class I, Division 2,
Groups A,B,C,D, T4 / Class 1,
Zone 2, Group IIC, T4
• for hazardous zone
EN 60079-15:2005,
EN 60079-0:2006, II 3 G Ex nA II T4
KEMA 07 ATEX 0145X
• for CSA and UL safety
UL 60950-1 CSA C22.2
No. 60950-1
• for hazardous zone of CSA and UL ISA 12.12.01-2000, CSA C22.2
No. 213-M1987, CL. 1, Div. 2, GP.
A,B,C,D, T4 / CL. 1, Zone 2, GP IIC,
T4 / CL. 1, Zone 2, AEx nC IIC, T4
Certificate of suitability
• CE marking
• EC Declaration of Conformity
• C-Tick
• CCC
• Railroad application
according to EN 50155
• e1 approval
• E1 approval
• Power-over-Ethernet
according to IEEE802.3at
for Type 1 and IEEE802.3af
Standard for wireless
communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Wireless approval
Marine classification association
• American Bureau of Shipping
Europe Ltd. (ABS)
• Bureau Veritas (BV)
• Det Norske Veritas (DNV)
• Germanischer Lloyd (GL)
• Lloyds Register of Shipping (LRS)
• Nippon Kaiji Kyokai (NK)
• Polski Rejestr Statkow (PRS)
8
Accessories
Accessories
1)
Wireless approval in the USA
Siemens IK PI · 2012
8/133
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11a/b/g
SCALANCE W740 for use in the indoor area
■ Ordering data
Order No.
Accessories
IWLAN Ethernet Client Modules
with built-in radio interface; radio
networks IEEE 802.11a/b/g/h at
2.4/5 GHz to 54 Mbit/s; WPA/AES;
Power over Ethernet (PoE),
mounting hardware; 4-pin screw
terminal for 24 V DC; manual on
CD-ROM, German/English
C-PLUG
SCALANCE W744-1PRO
PRESET-PLUG
For administration of the radio link
of one device with Industrial
Ethernet connection;
IP65 degree of protection;
scope of delivery:
2 antennas ANT795-4MR,
IP 67 hybrid plug connector
• National approvals for operation
outside the USA
• National approvals for operation
within the USA1)
Swap medium for simple initial
startup of SCALANCE W access
points and client modules,
as well as IWLAN/PB Link PN IO
For administration of the radio link
of up to eight devices with Industrial Ethernet connection;
IP65 degree of protection;
scope of delivery:
2 antennas ANT795-4MR,
IP 67 hybrid plug connector
• National approvals for operation
outside the USA
• National approvals for operation
within the USA 1)
6GK5 744-1AA60-2AA0
6GK5 744-1AA60-2AB0
6GK5 746-1AA60-4AA0
6GK5 746-1AA60-4AB0
SCALANCE W747-1RR
For administration of the radio link
with iPCF of up to eight devices
with Industrial Ethernet
connection;
IP65 degree of protection;
scope of delivery:
2 antennas ANT795-4MR,
IP 67 hybrid plug connector
• National approvals for operation
outside the USA
• National approvals for operation
within the USA 1)
6GK1 900-0AB00
Swap medium for simple
replacement of devices in the
event of a fault; for storing configuration data; can be used in
SIMATIC NET products with
PLUG slot
SCALANCE W746-1PRO
8
Order No.
SCALANCE W740 Client Modules
6GK5 747-1AA60-6AA0
6GK5 747-1AA60-6AB0
SIMATIC Mobile Panel 277F
IWLAN
• Communication via WLAN
(PROFINET)
with acknowledgement button
and emergency stop button
• Communication via WLAN
(PROFINET)
with acknowledgment button
and emergency stop button
with integrated handwheel,
key-operated switch, and two
illuminated pushbuttons
Note:
Please also order the desktop
power supply or battery charger!
• Table-top power supply incl.
power cable for EU, US, UK, JP
(only suitable for operation
under laboratory/office conditions)
• Charger for safe storage and
charging the device incl. lock for
securing the device in the
charger. Charging capabilities
for up to two additional batteries
• Additional battery with LED
indicator for indicating the
charge status
• Transponder incl. batteries
(3x AA)
IE FC RJ45 modular outlet
with power insert
6GK5 798-8AB00
6AV6 645-0DB01-0AX0
6AV6 645-0DC01-0AX0
6AV6 671-5CN00-0AX1
6AV6 671-5CE00-0AX0
6AV6 671-5CL00-0AX0
6AV6 671-5CM00-0AX0
6GK1 901-1BE00-0AA3
FastConnect RJ45 modular outlet
for Industrial Ethernet with a
replaceable insert for 1 x 24 V
and 1 x 100 Mbit/s interface
IE Hybrid Cable 2x2 + 4x0.34
6XV1 870-2J
4-wire, shielded installation cable;
sold by the meter,
up to 1000 m,
minimum order 20 m
IE FC RJ45 Plug 180 2x2
RJ45 plug connector for
Industrial Ethernet with a rugged
metal enclosure and integrated
insulation-displacement contacts
for connecting Industrial Ethernet
FC installation cables;
with a 180° cable outlet;
for network components and
CPs/CPUs with Industrial Ethernet
interface
• 1 pack = 1 unit
• 1 pack = 10 units
• 1 pack = 50 units
1)
Please note national approvals at
www.siemens.com/wireless-approvals
8/134
Siemens IK PI · 2012
6GK1 901-1BB10-2AA0
6GK1 901-1BB10-2AB0
6GK1 901-1BB10-2AE0
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Client Modules IEEE 802.11a/b/g
SCALANCE W740 for use in the indoor area
■ Ordering data
Order No.
Accessories (continued)
IE FC Standard Cable GP 2 x 2
■ More information
Wireless approvals:
6XV1 840-2AH10
4-core, shielded
TP installation cable for
connection to IE FC Outlet
RJ45/ IE FC RJ45 Plug;
PROFINET-compliant;
with UL approval;
sold by the meter;
max. length 1000 m,
minimum order 20 m
Current approvals can be found on the Internet at:
www.siemens.com/wireless-approvals
To assist in selecting the right products for Industrial Wireless
Communication, the SIMATIC NET Selection Tool is available:
Online version:
www.siemens.com/snst
Offline version:
www.siemens.com/snst-download
IE TP Cord RJ45/RJ45
TP cable 4 x 2
with 2 RJ45 connectors
• 0.5 m
•1m
•2m
•6m
• 10 m
6XV1 870-3QE50
6XV1 870-3QH10
6XV1 870-3QH20
6XV1 870-3QH60
6XV1 870-3QN10
IE FC Stripping Tool
6GK1 901-1GA00
Preadjusted stripping tool
for fast stripping of the
Industrial Ethernet FC cables
IP 67 hybrid connector
09 45 125 1300.00
Connector for connecting
SCALANCE W700 to
Industrial Ethernet and
Power over Ethernet (PoE),
with assembly instructions, 1 unit
Order directly from:
HARTING Deutschland GmbH &
Co. KG
Postfach 24-51
32381 Minden, Germany
Phone: +49 (0)571-8896-0
Fax: +49 (0)571-8896-354
E-mail: [email protected]
Internet: www.HARTING.com
Power M12
Cable Connector PRO
6GK1 907-0DC10-6AA3
Terminal socket for connection of
SCALANCE W700 for 24 V DC
supply voltage; 4-pole, A-coded,
with assembly instructions,
3 units
PS791-1PRO Power Supply
8
6GK5 791-1PS00-0AA6
AC/DC power supply,
10 W, IP65 (-20 to +60 °C),
input: 90 V - 265 V AC,
output: 24 V DC,
metal housing;
scope of supply:
AC power 3+PE cable connector,
DC power cord M12,
mounting hardware;
operating instructions
German/English
IE Hybrid RJ45
Socket Dust Cover
6ES7 194-1JB10-0XA0
Dust cap for RJ45 connection
socket (Industrial Ethernet/PoE)
of SCALANCE W700
Antennas and miscellaneous
IWLAN accessories
See Industrial Wireless LAN/
accessories
Siemens IK PI · 2012
8/135
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN antennas
■ Overview
■ Benefits
• Investment protection thanks to compliance with the globally
recognized standard IEEE 802.11 and – depending on the
version – suitability for 2.4 GHz and/or 5 GHz
• Cost-effective connection to devices in remote,
difficult-to-access, or hostile environments
• Establishment of a reliable IWLAN wireless infrastructure
through the use of remote antennas, even if the access points
and client modules are installed in the cabinet, for example
■ Application
Separate antennas optimize the transmission and receiving
conditions and support the use of IWLAN products in a number
of industrial applications. With directional antennas, conveyor
lines or corridors can be covered by wireless or point-to-point
links can be implemented at distances of up to several
1000 meters.
Alternatively, an omnidirectional antenna concentrates the
wireless field around the antenna in the shape of a disc which
enhances the quality of the connection.
Remote antennas increase the reliability of wireless links by
optimizing the receiving and emission of signals.
• Use in Industrial Wireless LAN (IWLAN) and WLAN in
accordance with IEEE 802.11 at 2.4 GHz and 5 GHz with
transmission rates of up to 450 Mbit/s
• Coordinated range of antennas for the most diverse
applications both indoors and outdoors
• Antennas with two (dual-slant) or three (MIMO) connections
for increased data throughput and increased reliability of the
wireless connection thanks to selective use of multiple path
propagation
• Suitable for use in hazardous areas (Zone 2);
no special approvals necessary
Antennas with two or three connections enable transmission
of the two to three streams usual with IEEE 802.11n, using just
one antenna. They are available both with omnidirectional and
directional characteristics.
Application examples:
Omnidirectional antennas
• Coverage of an area which has at its center a pole for
mounting the antenna
• Installation of the antenna on the roof in the case of automated
guided vehicle systems for reliable data exchange with the
vehicles
• Wide-area coverage of a production cell or robot station
Directional antennas
• Communication between buildings over long distances with
the help of an antenna with narrow opening angle and high
gain
• Selective coverage of warehouse/high-bay warehouse aisles
with the help of a wide-angle antenna prevents interference
with neighboring wireless fields
8
8/136
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN antennas
■ Design
Antennas exclusively for
SCALANCE W-700 according to
IEEE 802.11n
with 1 connection
Antennas for SCALANCE
W-700 according to
IEEE 802.11n and
802.11a/b/g
Antennas exclusively for
SCALANCE W-700
according to
IEEE 802.11a/b/g
with 1 connection
with 1 connection
with 2 connections (dual)
with 3 connections (MIMO)
ANT795-4MA
ANT793-6DG
ANT795-6MT
ANT792-4DN
ANT795-4MR
ANT795-4MC
ANT793-8DJ
ANT793-6DT
ANT793-4MN
ANT795-4MS
ANT795-4MD
ANT793-8DK
ANT792-6MN
ANT795-6DN
ANT793-6MN
ANT793-8DN
ANT795-6DC
ANT792-8DN
RCoax radiating cables
*B,.B;;B
ANT795-6MN
Overview of IWLAN antennas
■ Function
Separate antennas are used to optimize the wireless field for the
application. In industrial applications, this supports a reliable
wireless field.
Antennas with several connections
(dual or MIMO antennas)
Directional effect
The suitable antenna is selected first by means of the wireless
field characteristic. A distinction is made between omni-directional antennas and directional antennas.
Antennas with two connections combine two individual
antennas, at 90° to each other, in one antenna enclosure. With
these antennas, two data streams can be transferred simultaneously thanks to the two different polarization levels. Depending
on the alignment of the polarization levels, these antennas are
referred to as dual-slant (rotated through +/-45°) or verticalhorizontal.
Antennas with three connections contain three individual
emitters that can be combined in one enclosure, either on
different polarization levels (0°, +/-45°) or at a suitable distance
from each other. The MIMO antennas can transmit three data
streams simultaneously using multiple path propagation.
Transmission of several data streams results in increased data
throughput and simultaneously a more reliable data transfer.
Siemens IK PI · 2012
8/137
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN antennas
■ Function (continued)
For the use of SCALANCE W-700 in accordance with
IEEE 802.11a/b/g:
Omnidirectional antennas
ANT795-4MR, ANT795-4MS
The ANT795-4MR antenna can only be rotated about one axis
and, due to its IP65 degree of protection, it is mainly used for the
SCALANCE W788 Access Points and the SCALANCE W7441PRO, W746-1PRO and W747-1RR Client Modules. Two of these
antennas are supplied with these access points or client
modules.
Horizontal
opening
angle
The ANT795-4MS antenna features an additional joint and is
therefore ideally suited to the SCALANCE W784 Access Points
and the SCALANCE W744-1, W746-1 and W747-1 Client
Modules.
*B,.B;;B
Vertical
opening
angle
Omni-directional antenna
With omni-directional antennas, the wireless field is emitted in
every direction surrounding the antenna (horizontal opening
angle: 360°), but it weakens as the distance increases. There is
a concentration in the vertical direction which creates passive
amplification of the wireless field. Many omni-directional
antennas have extremely weak radiation directly below the
antenna due to their type of construction. This property can be
seen in the associated antenna diagram.
ANT795-4Mx
With these omni-directional antennas, the wireless field is
concentrated at 2.4 GHz and 5 GHz in the vertical plane of the
antenna. All antennas of this type have an opening angle of 30°
in the vertical direction and an antenna gain of 4 dB. They are
directly mounted on the R-SMA or N connector of the
SCALANCE W enclosure.
For the use of SCALANCE W-700 in accordance with
IEEE 802.11n:
8
ANT795-4MA, ANT795-4MC and ANT795-4MD
The ANT795-4MC and ANT 795-4MD antennas can be rotated
around only one axis, they have N-Connect connectors and
degree of protection IP65, and they are used with the
SCALANCE W788 M12 Access Points and the SCALANCE
W748 M12 Client Modules.
The ANT795-4MA antenna features an additional joint, an
R-SMA connector, and degree of protection IP30. It is therefore
optimally suitable for the SCALANCE W788 RJ45 Access Points
and the SCALANCE W748 RJ45 Client Modules.
ANT792-6MN, ANT793-6MN
With these omni-directional antennas, the wireless field is
concentrated at 2.4 GHz (ANT792-6MN) and 5 GHz
(ANT793-6MN) in the vertical plane of the antenna.
The antennas have a gain of 6 dB and 5 dB respectively.
N-Connect is used as the connector and can be connected to
SCALANCE W over an extension cable from the range of IWLAN
cabling. Both antennas are supplied with a mounting aid (metal
bracket) that supports wall or mast mounting. The antennas are
therefore ideally suited, for example, to providing wireless
coverage for a place that has a mast at its center on which they
can be mounted.
ANT795-6MN, antenna mounting tool for ANT795-6MN
With this omni-directional antenna, the wireless field is concentrated at 2.4 GHz and 5 GHz in the vertical plane of the antenna.
The antenna has a gain of 6 dB and 8 dB respectively.
N-Connect is used as the connector and can be connected to
SCALANCE W over an extension cable from the range of IWLAN
cabling. The antenna characteristic is such that good transmission properties also exist directly above and below the
antenna. It is designed for mounting on a control cabinet or roof,
but it can also be mounted under a roof, so it is suitable, for
example, for the mobile units of an automated guided vehicle
system. If it needs to be installed on a ceiling under a roof, the
optional antenna mounting tool for ANT795-6MN is used.
ANT795-6MT
This antenna is an omnidirectional MIMO antenna with three
QMA connections. The wireless field is concentrated at 2.4 GHz
and 5 GHz in the vertical plane of the antenna. The antenna has
a gain of 6 dB.
The antenna characteristic is such that good transmission
properties also exist directly above and below the antenna. It is
designed for mounting on a roof or (together with the supplied
mounting bracket) under a ceiling, and it is thus suitable, for
example, for the mobile units of an automated guided vehicle
system.
The ANT795-6MT is connected to the SCALANCE W-700
Access Points in accordance with IEEE 802.11n via
QMA/N-Connect male/female IWLAN adapter cables and
the IWLAN flexible antenna connecting cables in the relevant
length and connector version.
8/138
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN antennas
■ Function (continued)
ANT792-8DN, ANT 793-8DJ and ANT793-8DK
Directional antennas
These antennas enable genuine alignment of the wireless field.
The wireless field is concentrated in a narrow cone due to the
narrow opening angle. High passive gains and long ranges are
therefore achieved.
Due to the high passive gain, the antennas are ideally suited to
bridging large distances.
The ANT792-8DN antenna is suitable for the 2.4 GHz frequency
band and has an antenna gain of 14 dB.
Vertical
opening angle
ANT793-8DJ (18 dB) and ANT793-8DK (23 dB) are strongly
directional antennas with vertical-horizontal polarization.
They each have two N-Connect connections.
*B,.B;;B
Horizontal
opening angle
Directional antenna
With directional antennas, the wireless field is emitted both in the
horizontal and vertical plane in the range of the opening angle.
It is concentrated in these areas and generates passive amplification. They are ideally suited to wall or mast mounting. The
direction can be aligned using the supplied mounting aid.
N-Connect is usually used as the connector and can be
connected to SCALANCE W over an extension cable from the
range of IWLAN cabling.
For the use of SCALANCE W-700 in accordance with
IEEE 802.11n:
For the use of SCALANCE W-700 in accordance with
IEEE 802.11a/b/g:
ANT795-6DN
The wireless field can be aligned at 2.4 GHz and 5 GHz using
this wide-angle antenna.
The antenna is suitable, for example, for providing wireless
coverage for an area in front of a wall.
ANT792-8DN, ANT793-8DN
Genuine alignment of the wireless field at 2.4 GHz
(ANT792-8DN) or 5 GHZ (ANT793-8DN) is achieved using these
antennas. The wireless field is concentrated in a narrow cone
due to the narrow opening angle. High passive gains and long
ranges are therefore achieved.
Due to the high passive gain, the antennas are ideally suited to
bridging large distances over IWLAN.
Antenna for SCALANCE W-700
ANT795-6DC, ANT793-6DG and ANT793-6DT
The wireless field can be aligned at 2.4 GHz and 5 GHz using
these wide-angle antennas. Each has an antenna gain of 9 dB.
Thanks to their characteristics, they are suitable, for example, for
providing wireless coverage for an area in front of a wall.
4
2
2,4 GHz
4
medium gain
3
5 GHz
6
high gain
8
very high
gain
5
2,4 + 5 GHz
–
D
8
x
D
directional
antenna
M
omnidirectional
antenna
G_IK10_XX_30288
The ANT795-6DT is connected to the SCALANCE W-700 Access
Points in accordance with IEEE 802.11n via QMA/N-Connect
male/female IWLAN adapter cables and the IWLAN flexible
antenna connecting cables in the relevant length and connector
version.
–
Directivity
ANT793-6DT is a MIMO antenna with three QMA connections for
the 5 GHz band.
2
Gain
ANT793-6DG is a dual-slant antenna with two N-Connect
connections for the 5 GHz frequency band.
ANT79
Frequency
The ANT795-6DC antenna is suitable for both frequency bands
2.4 and 5 GHz. It has an N-Connect connection. Two or three
antennas of this type can also be used for covering several
sectors.
The antenna name indicates the properties of the
IWLAN antennas
Siemens IK PI · 2012
8/139
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN antennas
■ Integration (continued)
Antennas especially for use with RCoax radiating cables
These antennas have been specially developed for use with the
RCoax radiating cable. They are preferably used in environments in which nodes move within limited areas or exclusively
along predefined paths. Typical applications are suspended
monorails or high-bay racking systems where the antenna is
within the near field of the radiating cable.
ANT793-4MN
With this omni-directional antenna, the wireless field is concentrated at 5 GHz in the vertical plane of the antenna. The antenna
has a gain of 6 dB at 5.2 GHz and 5 dB at 5.7 GHz. The polarization of the antenna is vertical (λ5/8 characteristic). N-Connect
is used as the connector type, which can be connected to
SCALANCE W or the IWLAN/PB Link PN IO over an extension
cable from the IWLAN connecting cable range.
ANT792-4DN
The wireless field is aligned at 2.4 GHz for this antenna.
The antenna has a gain of 4 dB. The polarization of the antenna
is circular, i.e. the receive path of the signals of both polarizations is amplified equally well. Signal strength fluctuations are
weaker at 2.4 GHz.
N-Connect is used as the connector type, which can be
connected to SCALANCE W or the IWLAN/PB-Link PN IO over
an IWLAN extension cable.
■ Integration
Access Point SCALANCE W-786 with remote antenna
IWLAN Antenna
ANT795-6MN
6GK5795-6MN10-0AA6
SCALANCE W-784 with cabinet bushing,
lightning protection and remote antenna
Lightning protector
LP798-1N
6GK5798-2LP00-2AA6
IWLAN
Termination
Impedance
TI795-1R
6GK5795-1TR10-0AA6
SCALANCE
W-786
6GK5786...
IWLAN Antenna
ANT792-6MN
6GK5792-6MN00-0AA6
IWLAN RCoax
N-Connect/N-Connect
Male/Male
Flexible Connection Cable
1 m = 6XV1875-5AH10
2 m = 6XV1875-5AH20
5 m = 6XV1875-5AH50
10 m = 6XV1875-5AN10
IWLAN RCoax
N-Connect/SMA
Female/Female
Panel Feedthrough
6GK5798-0PT00-2AA0
8
IWLAN RCoax
R-SMA/SMA
Male/Male
Flexible Connection Cable
0.3 m = 6XV1875-5DE30
2 m = 6XV1875-5DH20
IWLAN RCoax N-Connect/R-SMA
Male/Male Flexible Connection Cable
1 m = 6XV1875-5CH10
2 m = 6XV1875-5CH20
5 m = 6XV1875-5CH50
10 m = 6XV1875-5CN10
Cabinet
SCALANCE W using the range of accessories with direct connection of an antenna, mounting in a control cabinet and
using a lightning protection element
8/140
Siemens IK PI · 2012
*B,.B;;B
SCALANCE
W-784
6GK5784...
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN antennas
■ Integration (continued)
MIMO antenna ANT795-6MT connected to SCALANCE W788-2 RJ45
with R-SMA ports
IWLAN N-Connect/N-Connect
Male/Male
Flexible Connection Cable
1 m = 6XV1 875-5AH10
Lightning protector
6GK5 798-2LP10-2AA6
IWLAN Antenna ANT795-6MT
6GK5 795-6MT00-0AA0
QMA/N-Connect
Male/Female
Flexible Connection Cable
6XV1 875-5JH10
IWLAN N-Connect/R-SMA
Male/Male
Flexible Connection Cable
5 m = 6XV1 875-5CH50
IWLAN N-Connect/N-Connect
Male/Male
Flexible Connection Cable
1 m = 6XV1 875-5AH10
IWLAN N-Connect/
N-Connect
Male/Male
Flexible Connection Cable
5 m = 6XV1 875-5AH50
Lightning protector
6GK5 798-2LP10-2AA6
IWLAN N-Connect/
N-Connect
Female/Female
Panel Feedthrough
6GK5 798-2PP00-2AA6
IWLAN N-Connect/
N-Connect
Female/Female
Panel Feedthrough
6GK5 798-2PP00-2AA6
IWLAN N-Connect/
R-SMA Male/Male
Flexible Connection Cable
0,3 m = 6XV1 875-5CE30
IWLAN N-Connect/
N-Connect Male/Male
Flexible Connection Cable
1 m = 6XV1 875-5AH10
SCALANCE W788-2 RJ45
6GK5 788-2FC00-0AA0
QMA/N-Connect
Male/Female
Flexible Connection Cable
6XV1 875-5JH10
*B,.B;;B
IWLAN Antenna ANT795-6MT
6GK5 795-6MT00-0AA0
MIMO antenna ANT795-6MT connected to SCALANCE W788-2 M12
with N-Connect ports
SCALANCE W788-2 M12
6GK5 788-2GD00-0AA0
SCALANCE W788-1 RJ45 access points with MIMO antenna and SCALANCE W788-1 M12 with N-Connect connection
Siemens IK PI · 2012
8
8/141
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN antennas
■ Integration (continued)
Dual Slant antenna ANT793-6DG connected to SCALANCE W788-2 RJ45
with R-SMA ports
Dual Slant antenna ANT793-6DG connected to SCALANCE W788-2 M12
with N-Connect ports
IWLAN Antenna ANT793-6DG
6GK5 793-6DG00-0AA0
IWLAN Antenna ANT793-6DG
6GK5 793-6DG00-0AA0
IWLAN N-Connect/N-Connect
Male/Male
Flexible Connection Cable
1 m = 6XV1 875-5AH10
IWLAN N-Connect / R-SMA
Male/Male
Flexible Connection Cable
5 m = 6XV1 875-5CH50
IWLAN N-Connect/N-Connect
Male/Male
Flexible Connection Cable
1 m = 6XV1 875-5AH10
Lightning protector
6GK5 798-2LP10-2AA6
Lightning protector
6GK5 798-2LP10-2AA6
IWLAN N-Connect/
N-Connect
Female/Female
Panel Feedthrough
6GK5 798-2PP00-2AA6
IWLAN N-Connect/
N-Connect
Female/Female
Panel Feedthrough
6GK5 798-2PP00-2AA6
Resistance
6GK5 795-1TR10-0AA6
IWLAN N-Connect / N-Connect
Male/Male
Flexible Connection Cable
5 m = 6XV1 875-5AH50
Resistance
6GK5 795-1TN00-1AA0
SCALANCE W788-2 RJ45
6GK5 788-2FC00-0AA0
8
SCALANCE W788-2 M12
6GK5 788-2GD00-0AA0
SCALANCE W788-1 RJ45 access points with dual slant antenna and SCALANCE W788-1 M12 with N-Connect connection
All antennas can be used with an N-Connect female
connecting plug.
8/142
Siemens IK PI · 2012
*B,.B;;B
IWLAN N-Connect/
R-SMA Male/Male
Flexible Connection Cable
0,3 m = 6XV1 875-5CE30
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN antennas
■ Technical specifications
Order No.
6GK5 795-4MC00-0AA3
6GK5 795-4MD00-0AA3
6GK5 795-4MR00-0AA6
Product type designation
ANT795-4MC antenna
ANT795-4MD antenna
ANT795-4MR antenna
2.4 … 2.4835 GHz
2.4 … 2.4835 GHz
2.4 … 2.4835 GHz
5.15 … 5.35 GHz
5.15 … 5.35 GHz
5.15 … 5.35 GHz
5.725 … 5.85 GHz
5.725 … 5.85 GHz
5.725 … 5.85 GHz
Impedance
50 Ω
50 Ω
50 Ω
Polarization
Linear vertical
Linear vertical
Linear vertical
Radiation characteristic
Omnidirectional
Omnidirectional
Omnidirectional
3 dB
5 dB
3 dB
5 dB
4 dB
5 dB
2
2
2
360°
-
360°
-
360°
-
360°
-
360°
-
360°
-
Note on beam angle
-
-
-
Number of electrical connections
of the antenna
1
1
1
Design of electrical connection
of the antenna
N connector, female, straight
N connector, female, 90° angle
R-SMA connector, male, 90° angle
Maximum angle of inclination down
0°
0°
0°
Range with free view without
hindrance
-
-
100 m
Note on range
-
-
Note:
The range may be much less and
depends on the spatial conditions,
the wireless standard being used,
the data rate, and the antenna at
the opposite end
Ambient temperature
• During operation
• During storage
• During transport
• During mounting
-20 … +65 °C
-20 … +65 °C
-20 … +65 °C
--
-20 … +65 °C
-20 … +65 °C
-20 … +65 °C
--
-20 … +65 °C
-20 … +65 °C
-20 … +65 °C
--
IP degree of protection
IP65
IP65
IP65
Width
Height
Depth
Diameter
35 mm
160 mm
13 mm
-
35 mm
160 mm
13 mm
-
35 mm
148 mm
13 mm
-
Net weight
26 g
26 g
26 g
Type of mounting
• Mast mounting
• Wall mounting
• Ceiling mounting
• Directly on the device
No
No
No
Yes
No
No
No
Yes
No
No
No
Yes
Radio frequencies
Radio frequency
• With WLAN in the 2.4 GHz
frequency band
• With WLAN in the 5 GHz
frequency band 1
• With WLAN in the 5 GHz
frequency band 2
Electrical specifications
Antenna gain compared with the
isotropic radiator of the WLAN
antenna
• In the 2.4 GHz frequency band
• In the 5 GHz frequency band
• With transmission frequency
5.2 GHz
• With transmission frequency
5.7 GHz
Maximum standing wave ratio
Beam angle of antenna
• In the 2.4 GHz frequency band
- Horizontal
- Vertical
• In the 5 GHz frequency band
- Horizontal
- Vertical
8
Permissible ambient conditions
Design, dimensions and weights
Siemens IK PI · 2012
8/143
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN antennas
■ Technical specifications (continued)
Order No.
6GK5 795-4MC00-0AA3
6GK5 795-4MD00-0AA3
6GK5 795-4MR00-0AA6
Product type designation
ANT795-4MC antenna
ANT795-4MD antenna
ANT795-4MR antenna
Product property silicon-free
Yes
Yes
Yes
Material of the outer sleeve
Polycarbonate
Polycarbonate
Polycarbonate
Wireless approval
Current country-specific approvals
can be found on the Internet at
www.siemens.com/wirelessapprovals
Current country-specific approvals
can be found on the Internet at
www.siemens.com/wirelessapprovals
Current country-specific approvals
can be found on the Internet at
www.siemens.com/wirelessapprovalsn
Order No.
6GK5 795-4MA00-0AA3
6GK5 795-4MS00-0AA6
Product type designation
ANT795-4MA antenna
ANT795-4MS antenna
2.4 … 2.4835 GHz
2.4 … 2.4835 GHz
5.15 … 5.35 GHz
5.15 … 5.35 GHz
5.725 … 5.85 GHz
5.725 … 5.85 GHz
Impedance
50 Ω
50 Ω
Polarization
Linear vertical
Linear vertical
Radiation characteristic
Omnidirectional
Omnidirectional
Antenna gain compared
with the isotropic radiator of the
WLAN antenna
• In the 2.4 GHz frequency band
• In the 5 GHz frequency band
3 dB
5 dB
3 dB
5 dB
Maximum standing wave ratio
2
2
360°
-
360°
-
360°
-
360°
-
Note on beam angle
-
-
Number of electrical connections of
the antenna
1
1
Design of electrical connection
of the antenna
R-SMA connector, male,
variable 0-90°
R-SMA connector, male
variable 0-90°
Maximum angle of inclination down
0°
0°
Range with free view without
hindrance
-
100 m
Note on range
-
Note:
The range may be much less and depends on the
spatial conditions, the wireless standard being used,
the data rate, and the antenna at the opposite end
Ambient temperature
• During operation
• During storage
• During transport
-20 … +65 °C
-20 … +65 °C
-20 … +65 °C
-20 … +65 °C
-20 … +65 °C
-20 … +65 °C
IP degree of protection
IP30
IP30
Product properties,
functions, components
General
Standards, specifications,
approvals
Radio frequencies
Radio frequency
• With WLAN in the 2.4 GHz
frequency band
• With WLAN in the 5 GHz
frequency band 1
• With WLAN in the 5 GHz
frequency band 2
Electrical specifications
8
Beam angle of antenna
• In the 2.4 GHz frequency band
- Horizontal
- Vertical
• In the 5 GHz frequency band
- Horizontal
- Vertical
Permissible ambient conditions
8/144
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN antennas
■ Technical specifications (continued)
Order No.
6GK5 795-4MA00-0AA3
6GK5 795-4MS00-0AA6
Product type designation
ANT795-4MA antenna
ANT795-4MS antenna
Width
Height
Depth
Diameter
35 mm
160 mm
13 mm
-
35 mm
160 mm
13 mm
-
Net weight
26 g
26 g
Type of mounting
• Mast mounting
• Wall mounting
• Ceiling mounting
• Directly on the device
No
No
No
Yes
No
No
No
Yes
Product property silicon-free
Yes
Yes
Material of the outer sleeve
Polycarbonate
Polycarbonate
Wireless approval
Current country-specific approvals can be found on
the Internet at www.siemens.com/wireless-approvals
Current country-specific approvals can be found on
the Internet at www.siemens.com/wireless-approvals
Order No.
6GK5 792-6MN00-0AA6
6GK5 793-6MN00-0AA6
6GK5 795-6MN10-0AA6
6GK5 795-6MT00-0AA0
Product type designation
ANT792-6MN antenna
ANT793-6MN antenna
ANT795-6MN antenna
ANT795-6MT antenna
2.4 … 2.5 GHz
-
2.4 … 2.7 GHz
2.4 … 2.69 GHz
-
5.15 … 5.875 GHz
3.4 … 3.7 GHz
5.15 … 5.35 GHz
-
-
4.9 … 5.935 GHz
5.47 … 5.935 GHz
Impedance
50 Ω
50 Ω
50 Ω
50 Ω
Polarization
Linear vertical
Linear vertical
Linear vertical
3 ports: Linear vertical
Radiation characteristic
Omnidirectional
Omnidirectional
Omnidirectional
Omnidirectional
Antenna gain compared with the
isotropic radiator of the WLAN
antenna
• In the 2.4 GHz frequency band
• In the 5 GHz frequency band
6 dB
-
5 dB
6 dB
8 dB
4 dB
6 dB
Maximum standing wave ratio
1,8
1,5
1,8
1,5
360°
30°
-
360°
-
360°
-
-
360°
25°
150°
-
360°
-
Note on beam angle
-
-
Take note of antenna
diagram
-
Number of electrical connections
of the antenna
1
1
1
3
Design of electrical connection
of the antenna
N connector, female
N connector, female
N connector, female
QMA, female
Maximum angle of inclination down
0°
0°
0°
0°
Crosstalk attenuation between
the antenna connections
-
-
-
20 dB
Front to back ratio
-
-
-
-
Design, dimensions and weights
Product properties,
functions, components
General
Standards, specifications,
approvals
Radio frequencies
Radio frequency
• With WLAN
in the 2.4 GHz frequency band
• With WLAN
in the 5 GHz frequency band 1
• With WLAN
in the 5 GHz frequency band 2
Electrical specifications
Beam angle of antenna
• In the 2.4 GHz frequency band
- Horizontal
- Vertical
• In the 5 GHz frequency band
- Horizontal
- Vertical
Siemens IK PI · 2012
8/145
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN antennas
■ Technical specifications (continued)
Order No.
6GK5 792-6MN00-0AA6
6GK5 793-6MN00-0AA6
6GK5 795-6MN10-0AA6
6GK5 795-6MT00-0AA0
Product type designation
ANT792-6MN antenna
ANT793-6MN antenna
ANT795-6MN antenna
ANT795-6MT antenna
Maximum transmit power
25 W
6W
75 W
10 W
Note on transmit power
-
At 25° ambient
temperature
At 25° ambient
temperature
At 25° ambient
temperature
Range with free view without
hindrance
200 m
200 m
200 m
-
Note on range
Note:
The range may be much
less and depends on the
spatial conditions,
the wireless standard
being used, the data rate,
and the antenna at the
opposite end
Note:
The range may be much
less and depends on the
spatial conditions,
the wireless standard
being used, the data rate,
and the antenna at the
opposite end
Note:
The range may be much
less and depends on the
spatial conditions,
the wireless standard
being used, the data rate,
and the antenna at the
opposite end
-
Ambient temperature
• During operation
• During storage
• During transport
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-45 … +70 °C
-45 … +70 °C
-45 … +70 °C
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-40 … +85 °C
-40 … +85 °C
-40 … +85 °C
IP degree of protection
IP65
IP65
IP65
IP65
Maximum wind load
3N
3.9 N
10 N
-
Note on wind load
at 160 km/h
at 160 km/h
at 160 km/h
-
Width
Height
Depth
Diameter
50 mm
40 mm
370 mm
-
16 mm
160 mm
16 mm
-
86 mm
43 mm
86 mm
-
282 mm
32 mm
92 mm
-
Net weight
300 g
300 g
300 g
320 g
Type of mounting
• Mast mounting
• Wall mounting
• Ceiling mounting
• Directly on the device
Yes
Yes
No
No
Yes
Yes
No
No
No
Yes
Yes
No
No
Yes
Yes
No
Product property silicon-free
Yes
Yes
Yes
Yes
Material of the outer sleeve
Glass fiber
Polypropylene
Polycarbonate
Polycarbonate
Certificate of suitability
-
-
-
• RoHS compliance
• Railroad application
according to EN 50124-1
• Railroad application
according to EN 50155
Yes
-
Yes
-
Railway application
in accordance with
NF-F-16-101,
NF-F-16-102
Yes
Yes
-
-
Yes
-
Wireless approval
Current country-specific
approvals can be found
on the Internet at
www.siemens.com/
wireless-approvals
Current country-specific
approvals can be found
on the Internet at
www.siemens.com/
wireless-approvals
Current country-specific
approvals can be found
on the Internet at
www.siemens.com/
wireless-approvals
Current country-specific
approvals can be found
on the Internet at
www.siemens.com/
wireless-approvals
Permissible ambient conditions
Design, dimensions and weights
8
Product properties,
functions, components
General
Standards, specifications,
approvals
8/146
Siemens IK PI · 2012
Yes
-
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN antennas
■ Technical specifications (continued)
Order No.
6GK5 795-6DC00-0AA0
6GK5 795-6DN00-0AA6
6GK5 793-6DG00-0AA0
6GK5 793-6DT00-0AA0
Product type designation
ANT795-6DC antenna
ANT795-6DN antenna
ANT793-6DG antenna
ANT793-6DT antenna
2.4 … 2.5 GHz
2.4 … 2.5 GHz
-
-
5.15 … 5.875 GHz
5.15 … 5.875 GHz
5.15 … 5.875 GHz
5.15 … 5.875 GHz
-
-
-
-
Impedance
50 Ω
50 Ω
50 Ω
50 Ω
Polarization
Linear vertical
Linear vertical
Dual linear +/- 45° slant
3 ports: Vertical,
+/- 45° slant
Radiation characteristic
Directional
Directional
Directional
Directional
9 dB
9 dB
9 dB
9 dB
9 dB
8 dB
2
1,5
2
1,7
75°
55°
75°
55°
-
-
55°
55°
55°
55°
70°
60°
65°
65°
Note on beam angle
-
-
-
-
Number of electrical connections
of the antenna
1
1
2
3
Design of electrical connection
of the antenna
N connector, female
N connector, female
N connector, female
QMA, female
Maximum angle of inclination down
0°
0°
0°
0°
Crosstalk attenuation between
the antenna connections
25 dB
-
20 dB
17 dB
Front to back ratio
15 dB
15 dB
20 dB
-
Maximum transmit power
10 W
10 W
10 W
2W
Note on transmit power
At 25° ambient
temperature
At 25° ambient
temperature
At 25° ambient
temperature
At 25° ambient
temperature
Range with free view
without hindrance
-
200 m
-
-
Note on range
-
Note:
The range may be much
less and depends on the
spatial conditions,
the wireless standard
being used, the data rate,
and the antenna at the
opposite end
-
-
Radio frequencies
Radio frequency
• With WLAN
in the 2.4 GHz frequency band
• With WLAN
in the 5 GHz frequency band 1
• With WLAN
in the 5 GHz frequency band 2
Electrical specifications
Antenna gain compared
with the isotropic radiator of the
WLAN antenna
• In the 2.4 GHz frequency band
• In the 5 GHz frequency band
• With transmission frequency
5.2 GHz
• With transmission frequency
5.7 GHz
Maximum standing wave ratio
Beam angle of antenna
• In the 2.4 GHz frequency band
- Horizontal
- Vertical
• In the 5 GHz frequency band
- Horizontal
- Vertical
Siemens IK PI · 2012
8
8/147
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN antennas
■ Technical specifications (continued)
Order No.
6GK5 795-6DC00-0AA0
6GK5 795-6DN00-0AA6
6GK5 793-6DG00-0AA0
6GK5 793-6DT00-0AA0
Product type designation
ANT795-6DC antenna
ANT795-6DN antenna
ANT793-6DG antenna
ANT793-6DT antenna
Ambient temperature
• During operation
• During storage
• During transport
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-40 … +85 °C
-40 … +85 °C
-40 … +85 °C
IP degree of protection
IP67
IP55
IP67
IP67
Maximum wind load
15 N
15 N
15 N
15 N
Note on wind load
at 160 km/h
at 160 km/h
from front at 160 km/h
from front at 160 km/h
Width
Height
Depth
Diameter
80 mm
101 mm
35 mm
-
101 mm
95 mm
32 mm
-
80 mm
101 mm
35 mm
-
80 mm
101 mm
35 mm
-
Net weight
110 g
110 g
110 g
270 g
Type of mounting
• Mast mounting
• Wall mounting
• Ceiling mounting
• Directly on the device
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Yes
No
No
Product property silicon-free
Yes
Yes
-
-
Material of the outer sleeve
Lexan EXL 9330
ASA
Lexan EXL 9330
Lexan EXL 9330
Standard for hazardous zone
-
-
-
-
Certificate of suitability
• RoHS compliance
• UL approval
- Note
Yes
-
Yes
-
Yes
-
Yes
Yes
UL94-V0, UL746C F1
Wireless approval
Current country-specific
approvals can be found
on the Internet at
www.siemens.com/
wireless-approvals
Current country-specific
approvals can be found
on the Internet at
www.siemens.com/
wireless-approvals
Current country-specific
approvals can be found
on the Internet at
www.siemens.com/
wireless-approvals
Current country-specific
approvals can be found
on the Internet at
www.siemens.com/
wireless-approvals
Permissible ambient conditions
Design, dimensions and weights
Product properties,
functions, components
General
Standards, specifications,
approvals
8
8/148
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN antennas
■ Technical specifications (continued)
Order No.
6GK5 792-8DN00-0AA6
6GK5 793-8DN00-0AA6
6GK5 793-8DJ00-0AA0
6GK5 793-8DK00-0AA0
Product type designation
ANT792-8DN antenna
ANT793-8DN antenna
ANT793-6DJ antenna
ANT793-6DK antenna
2.4 … 2.7 GHz
-
-
-
-
5.15 … 5.875 GHz
5.25 … 5.875 GHz
5.15 … 5.875 GHz
-
-
-
-
Impedance
50 Ω
50 Ω
50 Ω
50 Ω
Polarization
Linear vertical
Linear, horizontal or
vertical
Dual linear verticalhorizontal
Dual linear verticalhorizontal
Radiation characteristic
Directional
Directional
Directional
Directional
Antenna gain compared with the
isotropic radiator of the WLAN
antenna
• In the 2.4 GHz frequency band
• In the 5 GHz frequency band
14 dB
-
18 dB
18 dB
23 dB
Maximum standing wave ratio
1,5
1,9
1,7
1,7
35°
30°
-
-
-
-
18°
18°
17°
17°
9°
9°
Note on beam angle
-
-
-
-
Number of electrical connections
of the antenna
1
1
2
2
Design of electrical connection
of the antenna
N connector, female
N connector, female
N connector, female
N connector, female
Maximum angle of inclination down
0°
0°
0°
0°
Crosstalk attenuation between
the antenna connections
-
-
30 dB
40 dB
Front to back ratio
20 dB
30 dB
30 dB
35 dB
Maximum transmit power
75 W
6W
6W
6W
Note on transmit power
At 25° ambient
temperature
At 25° ambient
temperature
At 25° ambient
temperature
At 25° ambient
temperature
Range with free view
without hindrance
1 000 m
1 000 m
-
-
Note on range
Note:
The range may be much
less and depends on the
spatial conditions,
the wireless standard
being used, the data rate,
and the antenna at the
opposite end
Note:
The range may be much
less and depends on the
spatial conditions,
the wireless standard
being used, the data rate,
and the antenna at the
opposite end
-
-
Radio frequencies
Radio frequency
• With WLAN
in the 2.4 GHz frequency band
• With WLAN
in the 5 GHz frequency band 1
• With WLAN
in the 5 GHz frequency band 2
Electrical specifications
Beam angle of antenna
• In the 2.4 GHz frequency band
- Horizontal
- Vertical
• In the 5 GHz frequency band
- Horizontal
- Vertical
Siemens IK PI · 2012
8
8/149
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN antennas
■ Technical specifications (continued)
Order No.
6GK5 792-8DN00-0AA6
6GK5 793-8DN00-0AA6
6GK5 793-8DJ00-0AA0
6GK5 793-8DK00-0AA0
Product type designation
ANT792-8DN antenna
ANT793-8DN antenna
ANT793-6DJ antenna
ANT793-6DK antenna
Ambient temperature
• During operation
• During storage
• During transport
• During mounting
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-
-45 … +70 °C
-45 … +70 °C
-45 … +70 °C
-
-45 … +70 °C
-45 … +70 °C
-45 … +70 °C
-
-45 … +70 °C
-45 … +70 °C
-45 … +70 °C
-
IP degree of protection
IP23
IP65
IP67
IP67
Maximum wind load
57 N
104 N
104 N
389 N
Note on wind load
at 160 km/h
at 220 km/h
from front at 220 km/h
from front at 220 km/h
Width
Height
Depth
Diameter
200 mm
200 mm
43 mm
-
190 mm
190 mm
30.5 mm
-
190 mm
190 mm
30.5 mm
-
371 mm
371 mm
40 mm
-
Net weight
500 g
700 g
700 g
2 500 g
Type of mounting
• Mast mounting
• Wall mounting
• Ceiling mounting
• Directly on the device
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Yes
No
No
Product property silicon-free
Yes
Yes
-
-
Material of the outer sleeve
ASA
Polypropylene
Polycarbonate/aluminum
Polycarbonate
Standards, specifications,
approvals
• RoHS compliance
Yes
Yes
Yes
Yes
Current country-specific
approvals can be found
on the Internet at
www.siemens.com/
wireless-approvals
Current country-specific
approvals can be found
on the Internet at
www.siemens.com/
wireless-approvals
Current country-specific
approvals can be found
on the Internet at
www.siemens.com/
wireless-approvals
Current country-specific
approvals can be found
on the Internet at
www.siemens.com/
wireless-approvals
Permissible ambient conditions
Design, dimensions and weights
Product properties,
functions, components
General
Wireless approval
8
8/150
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN antennas
■ Technical specifications (continued)
Order No.
6GK5 792-4DN00-0AA6
6GK5 793-4MN00-0AA6
Product type designation
ANT792-4DN RCoax antenna
ANT793-4MN RCoax antenna
2.4 … 2.4835 GHz
-
-
5.15 … 5.85 GHz
-
-
Impedance
50 Ω
50 Ω
Polarization
Circular clockwise
Vertical (lambda 5/8 characteristic)
Radiation characteristic
Directional
Omnidirectional
4 dB
-
6 dB
1,8
2
90°
-
-
-
360°
40°
Note on beam angle
-
-
Number of electrical connections
of the antenna
1
1
Design of electrical connection
of the antenna
N connector, female
N connector, female
Maximum angle of inclination down
0°
0°
Crosstalk attenuation between
the antenna connections
-
-
Front to back ratio
2.5 dB
-
Maximum transmit power
1W
1W
Ambient temperature
• During operation
• During storage
• During transport
-40 … +70 °C
-40 … +70 °C
-40 … +70 °C
-40 … +70 °C
-40 … +70 °C
-40 … +70 °C
IP degree of protection
IP65
IP65
Width
Height
Depth
Diameter
78.7 mm
30 mm
78.7 mm
30 mm
Net weight
114 g
65 g
Radio frequencies
Radio frequency
• With WLAN
in the 2.4 GHz frequency band
• With WLAN
in the 5 GHz frequency band 1
• With WLAN
in the 5 GHz frequency band 2
Electrical specifications
Antenna gain compared
with the isotropic radiator of the
WLAN antenna
• In the 2.4 GHz frequency band
• In the 5 GHz frequency band
• With transmission frequency
5.2 GHz
• With transmission frequency
5.7 GHz
Maximum standing wave ratio
Beam angle of antenna
• In the 2.4 GHz frequency band
- Horizontal
- Vertical
• In the 5 GHz frequency band
- Horizontal
- Vertical
8
Permissible ambient conditions
Design, dimensions and weights
Product properties,
functions, components
General
Product property silicon-free
Yes
Yes
Material of the outer sleeve
Polycarbonate
Polycarbonate
Standards, specifications,
approvals
• UL approval
- Note
-
Yes
UL94-V1
Current country-specific approvals can be found on
the Internet at www.siemens.com/wireless-approvals
Current country-specific approvals can be found on
the Internet at www.siemens.com/wireless-approvals
Wireless approval
Siemens IK PI · 2012
8/151
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN antennas
■ Ordering data
Order No.
Directional antennas;
National approvals, compact
instructions on paper,
German/English
incl. mounting hardware;
compact instructions on paper,
German/English
For mounting directly onto
SCALANCE W
Wall or mast mounting
• ANT795-6DC antenna
Wide-angle antenna,
slightly directional;
antenna gain incl. N-Connect
connector 9/9 dB,
2.4/5 GHz, -40 to +80 °C
• ANT793-6DG antenna
Dual-slant wide-angle antenna,
slightly directional;
antenna gain incl. two
N-Connect connectors 9 dB,
5 GHz, -40 bis +80 °C
• ANT793-6DT antenna
MIMO antenna with 3 QMA
sockets, wide-angle antenna,
slightly directional;
antenna gain 9 dB,
5 GHz, -40 to +85 °C
• ANT795-6DN antenna
Wide-angle antenna,
slightly directional;
antenna gain incl. N-Connect
connector 9/9 dB,
2.4/5 GHz, -40 to +80 °C;
with terminating resistor
1 x TI795-1R
• ANT792-8DN antenna
Antenna, strongly directional;
antenna gain incl. N-Connect
connector 14 dB, 2.4 GHz;
-40 to +80 °C;
with terminating resistor
1 x TI795-1R
• ANT793-8DN antenna
Antenna, strongly directional;
antenna gain incl. N-Connect
connector 19 dB, 5 GHz,
-45 to +70 °C;
with terminating resistor
1 x TI795-1R
• ANT793-8DJ antenna
Vertically-horizontally polarized
antenna, strongly directional;
antenna gain incl. two
N-Connect connectors 18 dB,
5 GHz; -45 to +70 °C
• ANT793-8DK antenna
Vertically-horizontally polarized
antenna, strongly directional;
antenna gain incl. two
N-Connect connectors 23 dB,
5 GHz; -45 to +70 °C
Antenna gain incl. connector
4 dB, 2.4/5 GHz;
• ANT795-4MC antenna;
IP65 (-20 to +65 °C),
straight connection,
N-Connect male,
scope of delivery: 3 antennas
• ANT795-4MD antenna;
IP65 (-20 to +65 °C),
connection with fixed 90° angle,
N-Connect male,
scope of delivery: 3 antennas
• ANT795-4MR antenna;
IP65 (-20 to +65 °C),
scope of delivery: 1 antenna
• ANT795-4MA / ANT795-4MS
antenna;
IP30; radial rotation possible
with additional joint;
R-SMA male
- ANT795-4MA;
scope of delivery: 3 antennas
- ANT795-4MS;
scope of delivery: 2 antennas
8
Order No.
Antennas with omnidirectional characteristic;
Wall or mast mounting
• ANT792-6MN antenna
Antenna gain incl.
N-Connect connector 6 dB,
2.4 GHz;
IP65 (-40 to +80 °C),
with terminating resistor
1 x TI795-1R;
incl. mounting hardware
• ANT793-6MN antenna
Antenna gain incl.
N-Connect connector 5 dB,
5 GHz;
IP65 (-45 to +70 °C),
with terminating resistor
1 x TI795-1R;
incl. mounting hardware
For mounting on a roof
• ANT795-6MN antenna
Antenna gain incl.
N-Connect connector 6/8 dB,
2.4/5 GHz;
IP65 (-40 to +80 °C),
with terminating resistor
1 x TI795-1R
• ANT795-6MT antenna
MIMO antenna with
3 QMA sockets,
antenna gain 6 dB,
2.4/5 GHz; (-40 to +85°C),
incl. fixing bracket
• Antenna mounting tool
(ANT795-6MN)
Mounting aid for installing
ANT795-6MN below a roof
8/152
Siemens IK PI · 2012
6GK5 795-4MC00-0AA3
6GK5 795-4MD00-0AA3
6GK5 795-4MR00-0AA6
6GK5 795-4MA00-0AA3
6GK5 795-4MS00-0AA6
6GK5 792-6MN00-0AA6
6GK5 793-6MN00-0AA6
6GK5 795-6MN10-0AA6
6GK5 795-6MT00-0AA0
6GK5 795-6MN01-0AA6
6GK5 795-6DC00-0AA0
6GK5 793-6DG00-0AA0
6GK5 793-6DT00-0AA0
6GK5 795-6DN00-0AA6
6GK5 792-8DN00-0AA6
6GK5 793-8DN00-0AA6
6GK5 793-8DJ00-0AA0
6GK5 793-8DK00-0AA0
Antennas for RCoax systems
• ANT792-4DN antenna
Circularly polarized RCoax helix
antenna for RCoax systems;
N-Connect female connection;
antenna gain at 2.4 GHz 1 dB
• ANT793-4MN antenna
Vertically polarized RCoax 5/8
antenna for RCoax systems;
N-Connect female connection;
antenna gain at 5.2 GHz/
5.7 GHZ 6/5 dB
6GK5 792-4DN00-0AA6
6GK5 793-4MN00-0AA6
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN antennas
■ More information
To assist in selecting the right products for Industrial Wireless
Communication, the SIMATIC NET Selection Tool is available at:
Online version:
www.siemens.com/snst
Offline version:
www.siemens.com/snst-download
You can order components supplementary to the
SIMATIC NET cabling system from your local contact.
Technical advice on this subject is available from:
J. Hertlein
I IA SC IC PRM 4
Phone +49 (0)911/750 44 65
E-mail: [email protected]
8
Siemens IK PI · 2012
8/153
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN RCoax cables
■ Overview
■ Design
The RCoax cables were specially designed for the frequency
band around 2.4 GHz or 5 GHz respectively.
Cable jacket
Dielectric
Wave propagation
The RCoax cables are radiating cables that function as special
antennas for the SCALANCE W Access Points in environments
with complex radio coverage. Its design means that a defined,
cone-shaped radio field is generated along the RCoax cable.
The radiating cables are therefore perfectly suitable for use in all
types of applications with track-bound vehicles.
• Rugged coaxial cable which can be easily installed
• Two cables for use in the frequency bands 2.4 GHz and 5 GHz
• Connection as external antenna to SCALANCE W780 Access
Points
• Connection of mobile nodes via SCALANCE W740 Client
Modules and IWLAN/PB Link PN IO using an antenna aligned
to the RCoax
• Suitable for use in hazardous areas (Zone 2); no special
approvals necessary
■ Benefits
8
• Reliable coverage in areas problematic for radio
• Avoidance of greater than desired WLAN expansion by means
of defined emission of the radio waves
• Cost savings thanks to direct substitution of sliding contacts,
trailing cables, and data light barriers
• Highly flexible laying
8/154
Siemens IK PI · 2012
Outer conductor
with opening
G_IK10_XX_30114
Inner
conductor
Openings are present in the outer conductor of the coaxial cable
which permit the penetration and emission of radio waves. A
defined radio field is then developed around the RCoax cables.
Longitudinal damping and extraction loss are in a balanced
relationship, which permits a long segment length of cable per
SCALANCE W780 Access Point and an appropriate distance
from the mobile station (SCALANCE W740, IWLAN/ PB
Link PN IO) to the RCoax cable.
Coordinated accessories are available for assembly:
• IWLAN RCoax cable clip 1/2"
• IWLAN RCoax spacer 85 mm
• IWLAN RCoax threaded washer M6
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN RCoax cables
■ Application
• In areas with demanding conditions for wireless coverage
(e.g. in tunnels, channels and elevator shafts) where
"unlimited" mobility is not of decisive importance, but where
rather a mechanically wear-free and thus maintenance-free
solution is required to ensure reliable data transmission:
This is made possible by the defined radio field along the
RCoax cable.
• The RCoax cables offer, especially for conveyor systems and
every type of rail-mounted vehicle (suspended monorails,
AGV systems) a wear-free and reliable wireless link.
SIMATIC S7-400
with CP 443-1
Application examples
• Suspended monorail
• Automated guided vehicle systems (AGVS)
• Cranes
• Stacker cranes
• Transfer lines
• Tool-changing trolleys
• Tunnels
• Lifts
Screw data
server
Server for
production information
system (FIS)
Switches
SCALANCE X-400
Industrial Ethernet
RCoax cable
Client Module
SCALANCE
W747-1RR
Field PG
SIMATIC
S7-200
with CP 243-1
Switches
SCALANCE
X208PRO
Nutrunner
Nutrunner station
Hangers
Client Module
SCALANCE
W747-1RR
Panel
Nutrunner
Nutrunner
Client Module
SCALANCE
W747-1RR
SIMATIC
S7-200
with CP 243-1
Switches
SCALANCE
X208PRO
Panel
RCoax cable
Nutrunner
Nutrunner station
Hangers
SIMATIC
S7-200
with CP 243-1
Switches
SCALANCE
X208PRO
Nutrunner
Panel
Nutrunner
Nutrunner station
Hangers
8
*B,.B;;B
Access Point
SCALANCE
W788-2RR
Access Point
SCALANCE
W788-2RR
Configuration example with RCoax cable using example of a nutrunner control in automobile production
Siemens IK PI · 2012
8/155
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN RCoax cables
■ Integration
IWLAN RCoax N-Connect
Female N-Connector
6GK5 798-0CN00-0AA0
IWLAN RCoax N-Connect
Female N-Connector
6GK5 798-0CN00-0AA0
IWLAN RCoax N-Connect
Male Termination Impedance 50 Ohm
6GK5 795-1TN00-1AA0
IWLAN RCoax Cable
2.4 GHz = 6XV1 875-2A
5 GHz = 6XV1 875-2D
Access Point SCALANCE W788-1RR / W788-2RR
Client Module SCALANCE W747-1RR
IWLAN Antenna
ANT792-4DN / ANT793-4MN
2 GHz = 6GK5 792-4DN00-0AA6
5 GHz = 6GK5 793-4MN00-0AA6
IWLAN RCoax
N-Connect/R-SMA
Male/Male
Flexible Connection Cable
1 m = 6XV1 875-5CH10
5 m = 6XV1 875-5CH50
IP67 Hybrid Connector
with IE Hybrid Cable
2x2 + 4x0.34
6XV1 870-2J
or
IE FC
Standard
Cable
2x2
6XV1 840-2AH10
IWLAN
Termination
Impedance
TI795-1R
6GK5 795-1TR10-0AA6
R-SMA
Plug
Power M12
Cable Connector PRO
6GK1 907-0DC10-6AA3
with Energy Cable 2x0.75
6XV1 812-8A
IP67 Hybrid Connector
with IE Hybrid Cable
2x2 + 4x0.34
6XV1 870-2J
or
IE FC
Standard
Cable
2x2
6XV1 840-2AH10
8
Connection example for an IWLAN RCoax system with connection to Industrial Ethernet
8/156
Siemens IK PI · 2012
IWLAN RCoax
N-Connect/R-SMA
Male/Male
Flexible Connection Cable
1 m = 6XV1 875-5CH10
R-SMA
Plug
Power M12
Cable Connector PRO
6GK1 907-0DC10-6AA3
with Energy Cable 2x0.75
6XV1 812-8A
*B,.B;;B
IWLAN
Termination
Impedance
TI795-1R
6GK5 795-1TR10-0AA6
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN RCoax cables
■ Integration (continued)
IWLAN RCoax N-Connect
Female N-Connector
6GK5 798-0CN00-0AA0
IWLAN RCoax N-Connect
Female N-Connector
6GK5 798-0CN00-0AA0
IWLAN RCoax cable
2.4 GHz = 6XV1 875-2A
5 GHz = 6XV1 875-2D
IWLAN
Termination
Impedance
TI795-1R
6GK5 795-1TR10-0AA6
IWLAN RCoax
N-Connect/N-Connect
Male/Male
Flexible Connection Cable
1 m = 6XV1 875-5AH10
IWLAN RCoax
N-Connect/R-SMA
Male/Male
Flexible Connection Cable
1 m = 6XV1 875-5CH10
5 m = 6XV1 875-5CH50
IP67 hybrid
plug-in connector
with IE hybrid cable
2x2 + 4x0.34
6XV1 870-2J
or
IE FC
Standard
cable
2x2
6XV1 840-2AH10
IWLAN/PB Link PN IO
Control box
IWLAN/PB Link PN IO
6GK1 417-5AB00
R-SMA
Plug
Power M12
Cable Connector PRO
6GK1 907-0DC10-6AA3
with power cable 2x0.75
6XV1 812-8A
IWLAN RCoax
N-Connect Female
Antenna
ANT792-4DN /
ANT793-4MN
2 GHz = 6GK5 792-4DN00-0AA6
5 GHz = 6GK5 793-4MN00-0AA6
IWLAN RCoax
N-Connect/SMA
Female/Female
Panel Feedthrough
6GK5 798-0PT00-2AA0
IWLAN RCoax
R-SMA/SMA
Male/Male
Flexible
Connection Cable
0.3 m
6XV1 875-5DE30
PROFIBUS bus interface connector RS 485 (35°)
6ES7 972-0BA41-0XA0
with PROFIBUS FC standard cable
6XV1 830-0EH10
G_IK10_XX_30121
Access Point SCALANCE W788-1RR / W788-2RR
IWLAN RCoax N-Connect
Male Termination Impedance
50 Ohm
6GK5 795-1TN00-1AA0
Connection example for an IWLAN RCoax system with interface to PROFIBUS
Siemens IK PI · 2012
8/157
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN RCoax cables
■ Technical specifications
Order No.
6XV1 875-2A
6XV1 875-2D
Product type designation
IWLAN RCoax Cable 2 GHz
IWLAN RCoax Cable 5 GHz
Suitability for use
Suspended monorails, cranes, stacker cranes,
or similar
Suspended monorails, cranes, stacker cranes,
or similar
2.4 … 2.485 GHz
-
-
5.15 … 5.85 GHz
-
-
50 Ω
50 Ω
0.15 dB/m
-
0.17 dB/m
-
-
22.5 dB/m
-
24.2 dB/m
-
24 dB/m
-
27 dB/m
-
-
35 dB
c(50) applies to a distance of 10 cm
between antenna and cable
42 dB
40 dB
c(50) applies to a distance of 10 cm
between antenna and cable
76 pF/m
76 pF/m
1.48 Ω/km
2.8 Ω/km
1.48 Ω/km
2.8 Ω/km
88%
88%
Wireless frequencies
Wireless frequency
• With WLAN
in the 2.4 GHz frequency band
• With WLAN
in the 5 GHz frequency band 1
• With WLAN
in the 5 GHz frequency band 2
Electrical specifications
Impedance
Attenuation factor per length
• At 2.4 GHz
- For cable mounting 10 mm
over concrete at 20 °C
- For cable mounting 15 mm
over aluminum rail at 20 °C
• At 5.15 GHz
- For cable mounting 10 mm
over concrete at 20 °C
- For cable mounting 15 mm
over aluminum rail at 20 °C
• At 5.85 GHz
- For cable mounting 10 mm
over concrete at 20 °C
- For cable mounting 15 mm
over aluminum rail at 20 °C
Attenuation factor per length Note
Tap loss
• At 2.4 GHz at 20 °C
• At 5.15 GHz at 20 °C
• At 5.85 GHz at 20 °C
• Note
Capacitance per length
8
DC resistance per length
• of the inner conductor at 20 °C
• of the coaxial outer conductor
at 20 °C
Relative velocity
8/158
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN RCoax cables
■ Technical specifications (continued)
Order No.
6XV1 875-2A
6XV1 875-2D
Product type designation
IWLAN RCoax Cable 2 GHz
IWLAN RCoax Cable 5 GHz
Outer diameter
• of inner conductor
• of the dielectric
• of the cable sheath
4.8 mm
12.4 mm
15.5 mm
4.8 mm
12.4 mm
15.5 mm
Thickness of cable sheath
1.3 mm
1.3 mm
Halogen-free polyolefin AM3
Copper-clad aluminum
Polyethylene foam
Overlapping copper foil with slot groups bonded to
cable jacket
Halogen-free polyolefin AM3
Copper-clad aluminum
Polyethylene foam
Overlapping copper foil with slot groups bonded to
cable jacket
Pastel turquoise
Pastel turquoise
20 cm
20 cm
-
-
Number of bending cycles
• Note
1
-
1
-
Maximum tensile load
1 100 N
1 100 N
Weight per length
0.232 kg/m
0.232 kg/m
Recommended spacing
0.5 m
0.5 m
Design of plug-in connection
-
-
Ambient temperature
• During operation
• During storage
• During transport
• During mounting
-40 … +85 °C
-70 … +85 °C
--25 … +60 °C
-40 … +85 °C
-70 … +85 °C
--25 … +60 °C
IP degree of protection
-
-
-
-
Yes
-
Yes
-
Current country-specific approvals can be found on
the Internet at www.siemens.com/wireless-approvals
Current country-specific approvals can be found on
the Internet at www.siemens.com/wireless-approvals
IEC 60754-2
IEC 60754-2
IEC 60332-1 and IEC 60332-3 Cat. C
IEC 60332-1 and IEC 60332-3 Cat. C
IEC 61034
IEC 61034
Mechanical data
Material
• of the cable sheath
• of inner conductor
• of the dielectric
• of the coaxial outer conductor
Color of cable sheath
Bending radius
• Minimum permitted single
bending radius
• Minimum permitted repeated
bending radius
Permissible ambient conditions
Product properties,
functions, components
General
Product property silicon-free
8
Standards, specifications,
approvals
Certificate of suitability
• RoHS compliance
• UL approval
- Note
Wireless approval
Standard
• For behavior in fire:
Corrosive gas emission
• For behavior in fire:
Smoke emission
• For behavior in fire:
Flame resistance
Siemens IK PI · 2012
8/159
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN RCoax cables
■ Ordering data
Order No.
Wireless approvals:
Radiating cable for complex radio
environments as special antenna
for SCALANCE W Access Points;
for extended temperature range
(-40 °C to + 85 °C);
sold by the meter
minimum order quantity 20 m
• 2.4 GHz
• 5 GHz
Current approvals can be found on the Internet at:
www.siemens.com/wireless-approvals
To assist in selecting the right products for Industrial Wireless
Communication, the SIMATIC NET Selection Tool is available:
6XV1 875-2A
6XV1 875-2D
Accessories
IWLAN RCoax N-Connect
stripping tool
6GK1 901-1PH00
Stripping tool for fast stripping of
RCoax cable on site
RCoax N-Connect female
N-connector
6GK5 798-0CN00-0AA0
Plug connector for assembly on
site; connection unit of RCoax
cable for connection of further
components, N-female
connection.
RCoax N-Connect male/male
Coupler
6GK5 798-0CP00-1AA0
RF coupling for connecting an
RCoax antenna to an RCoax
cable; two N-Connect male
connectors
IWLAN RCoax cable clip 1/2"
Cable holder for RCoax cable
• 10 items
• 100 items
6GK5 798-8MB00-0AC1
6GK5 798-8MB00-0AM1
IWLAN RCoax threaded
washer M6
Threaded washer M6 for RCoax
cable clip 1/2", for assembly with
M6 threaded bolts
• 10 items
• 100 items
8
■ More information
IWLAN RCoax cables
6GK5 798-8MC00-0AC1
6GK5 798-8MC00-0AM1
IWLAN RCoax spacer 85 mm
Spacer 85 mm for RCoax cable
clip 1/2"
• 10 items
• 100 items
8/160
Siemens IK PI · 2012
6GK5 798-8MD00-0AC1
6GK5 798-8MD00-0AM1
Online version:
www.siemens.com/snst
Offline version:
www.siemens.com/snst-download
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN cabling technology
■ Overview
Lightning protection elements
• When separate antennas are used outdoors, there is a risk of
lightning strikes.
• A lightning protector can be used to prevent damage.
Cabinet feedthroughs
Together with the antenna connecting cables, the cabinet
feedthroughs enable simple connection of remote antennas to
the active components located in the control cabinet/box.
Attenuator
The 10 dB attenuator is always used when the transmitted power
has to be reduced both in the send and receive directions.
Typical application areas include short RCoax segments or
directional wireless links, which are to be limited in extent.
A comprehensive, coordinated range of coaxial accessories is
offered for flexible combination and installation of the individual
IWLAN components indoors and outdoors.
This range encompasses connecting cables as well as diverse
connectors, lightning protection elements, a power splitter and
an attenuator.
■ Benefits
• Flexible use thanks to extensive, coordinated range
• Operation also outdoors with extended temperature range
and protection against water and dust thanks to degree of
protection IP65
• Components are suitable for use with SCALANCE W-700
including national approvals
■ Application
RCoax/antenna connecting cables
• The flexible IWLAN RCoax/antenna connecting cables are
required for connecting RCoax segments or antennas with
active devices.
• The cables offer low attenuation so that the quality of the radio
signal is only reduced to a minimal extent.
• All antenna cables are flame-resistant, chemical-resistant and
silicone-free.
Terminating resistors
• Terminating resistors are required for wireless termination of
unused antenna connections at the access points and clients.
• RCoax segments must be terminated at the end with a terminating resistor.
Power splitter
• With the help of the power splitter, the transmission power of
an access point is divided between two RCoax or antenna
segments.
• This enables wireless coverage in two areas using just one
access point.
Product versions
RCoax/antenna connecting cables
• Pre-assembled cable lengths (0.3 m to 10 m)
• Different connector types and combinations
(N-Connect, R-SMA, SMA, QMA)
Terminating resistors
• TI795-1R: Terminating resistor 50 ohms for R-SMA antenna
sockets
• TI795-1N: Terminating resistor 50 ohms for N-Connect
antenna sockets or RCoax segments
Lightning protection elements
• LP798-2N: Maintenance-free lightning protection element for
N-Connect connections
- Quarter-wave system (lambda-quarter) for the frequency
range 2 to 6 GHz
- Represents a short-circuit for DC voltages so that all types of
overvoltage can be reliably diverted
- Not suitable for DC infeed via the antenna cable
• LP798-1N: Lightning protection element for N-Connect
connections
- With gas discharge arrester for the frequency range 0 to
6 GHz for N-Connect connections
- Suitable for DC infeed via the antenna cable
Cabinet feedthroughs
• N-Connect female/SMA female with fastening flange for panel
thicknesses up to 5.5 mm
• N-Connect female/N-Connect female without flange for panel
thicknesses up to 4.5 mm
- Can also be used to connect two antenna connecting cables
Siemens IK PI · 2012
8/161
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN cabling technology
■ Technical specifications
8
Order No.
6XV1875-5Axxx
6XV1875-5Cxxx
6XV1875-5Dxxx
6XV1875-5Jxxx
Product type designation
IWLAN RCoax antenna
N-Connect
male/male
flexible antenna
connecting cable
IWLAN RCoax antenna
N-Connect/R-SMA
male/male
flexible antenna
connecting cable
IWLAN RCoax antenna
N-Connect/SMA
male/male
flexible antenna
connecting cable
IWLAN RCoax antenna
QMA/N-Connect
male/male
flexible antenna
connecting cable
Number of plug-in connections
2
2
2
2
Design of plug-in connection 1
N-Connect male
N-Connect male
N-Connect male
QMA male
Design of plug-in connection 2
N-Connect male
R-SMA male
SMA male
N-Connect female
Frequency range
≤ 6 GHz
≤ 6 GHz
≤ 6 GHz
≤ 6 GHz
Impedance
50 Ω
50 Ω
50 Ω
50 Ω
Capacity
82 pF/m
82 pF/m
82 pF/m
82 pF/m
Return loss
≥ -23 dB
≥ -23 dB
≥ -23 dB
-
Attenuation
• at 2.4 GHz
• at 5.7 GHz
0.53 dB/m
0.88 dB/m
0.53 dB/m
0.88 dB/m
0.53 dB/m
0.88 dB/m
0.55 dB/m
0.93 dB/m
Ambient temperature
• During operating phase
• during storage
• during transport
-40 °C to +80 °C
-40 °C to +80 °C
-40 °C to +80 °C
-40 °C to +80 °C
-40 °C to +80 °C
-40 °C to +80 °C
-40 °C to +80 °C
-40 °C to +80 °C
-40 °C to +80 °C
-40 °C to +80 °C
-40 °C to +80 °C
-40 °C to +80 °C
Smallest bending radius
• for one-off bending
• for repeated bending
3.2 cm
4.5 cm
3.2 cm
4.5 cm
3.2 cm
4.5 cm
3.2 cm
5.8 cm
Tensile strength
30 … 80 N
30 … 80 N
30 … 80 N
-
Net weight/m
75 g/m
75 g/m
75 g/m
-
Outer diameter
6.3 mm
6.3 mm
6.3 mm
-
Order No.
6GK5 795-1TR10-0AA6
6GK5 795-1TN00-0AA6
6GK5798-0SN0-0EA0
6GK5798-0AP00-4CA0
Product type designation
Termination Impedance
TI795-1R
Termination impedance
TI795-1N
Power splitter
Attenuator
Number of plug-in connections
1
1
3
2
Connection version
R-SMA male
N-Connect male
N-Connect female
N-Connect male / female
Frequency range
≤ 6 GHz
≤ 6 GHz
2.4 … 6 GHz
≤ 6 GHz
Impedance
50 Ω
50 Ω
50 Ω
50 Ω
Return loss
> 25 dB/6 GHz
> 25 dB/6 GHz
≥ 24 dB
–
≤ 3.05 dB
10 dB
Insertion loss
Performance range
<1W
<1W
250 W
1W
Ambient temperature
• During operating phase
• during storage
• during transport
-40 °C to +70 °C
-40 °C to +70 °C
-40 °C to +70 °C
-40 °C to +70 °C
-40 °C to +70 °C
-40 °C to +70 °C
-25 °C to +110 °C
-25 °C to +110 °C
-25 °C to +110 °C
-40 °C to +70 °C
-40 °C to +70 °C
-40 °C to +70 °C
Degree of protection
IP65
IP65
IP67
–
Diameter
9 mm
21 mm
–
21 mm
Length
15 mm
34.5 mm
131.4 mm
45.7 mm
Width
–
–
71.4 mm
–
Depth
–
–
34 mm
–
Net weight
5g
45 g
937 g
–
8/162
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN cabling technology
■ Technical specifications (continued)
Order No.
6GK5 798-2LP00-2AA6
6GK5 798-2LP10-2AA6
Product type designation
LP798-1N lightning protector
LP798-2N lightning protector
Transmission frequency
0 … 6 GHz
2 … 6 GHz
50 Ω
50 Ω
N-Connector female/female
N-Connector female/female
Ambient temperature
• During operation
• During storage
• During transport
-40 … +85 °C
-40 … +85 °C
-40 … +85 °C
-40 … +85 °C
-40 … +85 °C
-40 … +85 °C
IP degree of protection
IP67
IP68
Width
Height
Depth
Diameter
54.8 mm
22.8 mm
89.6 mm
29 mm
Net weight
50 g
80 g
Type of mounting
-
-
Electrical data
Impedance
Mechanical data
Design of plug-in connection
Permissible ambient conditions
Design, dimensions and weights
■ Ordering data
Order No.
Order No.
IWLAN RCoax antenna
N-Connect/R-SMA Male/male
flexible connection cable
IWLAN RCoax antenna
QMA/N-Connect male/male
Flexible connection cable
Flexible connecting cable
for connecting an RCoax cable or
antenna to a SCALANCE W-700
access point with R-SMA
connections; pre-assembled with
two connections, N-Connect male
and R-SMA male
• 0.3 m
•1m
•2m
•5m
• 10 m
Adapter cable for connecting a
MIMO antenna with QMA
connections to the flexible
connecting cables;
assembled with two connections
QMA male and N-Connect
female; 3 units
•1m
6XV1 875-5CE30
6XV1 875-5CH10
6XV1 875-5CH20
6XV1 875-5CH50
6XV1 875-5CN10
IWLAN RCoax antenna
N-Connect male/male
Flexible connection cable
Flexible connecting cable for
connecting an RCoax cable or
antenna to a SCALANCE W-700
access point with N-Connect
connections; pre-assembled with
two N-Connect male connections
•1m
•2m
•5m
• 10 m
6XV1 875-5AH10
6XV1 875-5AH20
6XV1 875-5AH50
6XV1 875-5AN10
6XV1 875-5JH10
IWLAN RCoax antenna
R-SMA/SMA male/male
Flexible connection cable
Flexible cable for connecting an
active device to components with
RSMA and SMA connections,
e.g. cabinet feedthrough;
pre-assembled with two R-SMA
male to SMA male connectors
• 0.3 m
•2m
IWLAN RCoax antenna
N-Connect male termination
impedance TI795-1N
8
6XV1 875-5DE30
6XV1 875-5DH20
6GK5 795-1TN00-1AA0
Terminating resistance for RCoax
cable and open wireless interfaces on SCALANCE W-700
devices with N-Connect connections, impedance 50 ohms,
N-Connect male connection;
IP65 (-40 to +70 °C)
Siemens IK PI · 2012
8/163
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
IWLAN cabling technology
■ Ordering data
IWLAN RCoax antenna
RSMA male termination
impedance TI795-1R
Order No.
6GK5 795-1TR10-0AA6
Offline version:
www.siemens.com/snst-download
6GK5 798-2LP00-2AA6
Lightning protector with N/N
female/female connection,
IP67 (-40 to +85 °C),
frequency range: 0 to 6 GHz
LP798-2N lightning protector
6GK5 798-2LP10-2AA6
Lightning protector with N/N
female/female connection,
IP68 (-40 to +85 °C),
quarter wave,
frequency range: 2 to 6 GHz
IWLAN RCoax antenna
N-Connect female power
splitter
6GK5 798-0SN00-0EA0
2-way cable splitter,
Y-element for dividing the RCoax
cable or for using two antennas
on one wireless interface
IWLAN RCoax antenna
N-Connect male/male coupler
6GK5 798-0CP00-1AA0
HF link for connecting
two RCoax cables;
two N-Connect male connectors
IWLAN RCoax antenna
N-Connect male/male
attenuator
Attenuator with N-Connect male/
N-Connect female connectors
• 10 dB
8
IWLAN RCoax antenna
N-Connect/SMA female/female
panel feedthrough
6GK5 798-0AP00-4CA0
6GK5 798-0PT00-2AA6
Cabinet feedthrough with
fastening flange for
wall thicknesses up to 5.5 mm,
SMA female and N-Connect
female connections
IWLAN RCoax antenna
N-Connect/N-Connect
female/female panel
feedthrough
Cabinet feedthrough for
wall thicknesses up to 4.5 mm,
two N-Connect female
connections
8/164
Siemens IK PI · 2012
To assist in selecting the right products for Industrial Wireless
Communication, the SIMATIC NET Selection Tool is available:
Online version:
www.siemens.com/snst
Terminating resistance for
open wireless interfaces on
SCALANCE W-700 devices
with RSMA connections,
impedance 50 ohms,
RSMA male connection;
IP65 (-40 to +70 °C); 3 units
Lightning protector LP798-1N
■ More information
6GK5 798-2PP00-2AA0
You can order components supplementary to the
SIMATIC NET cabling range from your local contact.
Technical advice on this subject is available from:
J. Hertlein
I IA SC IC PRM 4
Phone +49 (0)911/750 44 65
E-mail: [email protected]
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
Power supply PS791-1PRO
■ Overview
■ Benefits
• Reduced storage of replacement parts, as only one power
supply unit is required for several SCALANCE products with
IP65 degree of protection
• Global application due to wide input voltage range
• High reliability as power supply is short-circuit proof, secure
against no-load operation and is able to bridge short breaks
in the mains power
• Variety of possible applications thanks to:
- wide range of input voltages
- high degree of efficiency
- low heat dissipation
■ Design
• The PS791-1 PRO power supply is an AC/DC power supply for
input voltages of 90 to 265 V AC for numerous SCALANCE
products with IP65 degree of protection.
• Mounting:
- Wall mounting or on S7-300 rail, immediately under/next to
the SCALANCE W788-xPRO and SCALANCE W788-xRR
Access Points, SCALANCE W74x-1PRO and SCALANCE
W74x-1RR Client Modules, or SCALANCE X-200PRO
switches
• Robust metal housing with IP65 protection against water
and dust
• Operating temperature -20 °C to +60 °C
• Fanless design and rugged metal casing;
High protection against dust and splashwater with IP65
degree of protection
• Operating temperatures from -20 °C to +60 °C
• Resistant to condensation
• Connection to AC network via AC Power 3+PE cable
connector (included)
• Connection to SCALANCE products in degree of protection
IP65
• In other applications, the Power M12 Plug PRO is used for the
DC-output (to be ordered separately)
• Direct mounting is possible on the SCALANCE products with
IP65 degree of protection using supplied installation material;
also suitable for wall-mounting or mounting on standard
mounting rail (S7-300)
(7SUR
6ZLWK&3
(7SUR
+HDY\JDXJHWKUHDGHGMRLQW
8
2SHUDWRUFRQWURODQGPRQLWRULQJ
)LHOG3*
(76
,3&ZLWK
&3
6&$/$1&(
;352
3RZHU6XSSO\
36352
$FFHVV3RLQW
6&$/$1&(
:352
$&9
3RZHU6XSSO\
36352
352),1(7
'&9
0RELOH3DQHO
,:/$1
$&9
,QGXVWULDO(WKHUQHW
*B,.B;;B
'&9
Example for the use of power supply PS791-1PRO with SCALANCE X and SCALANCE W
Note:
When SCALANCE W is connected to SCALANCE X208PRO,
the power supply in the hybrid connector is not available;
power must be supplied via the M12 plug connector.
Siemens IK PI · 2012
8/165
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
Power supply PS791-1PRO
■ Technical specifications
■ Ordering data
Order No.
6GK5 791-1PS00-0AA6
PS791-1PRO power supply
Product type designation
Power supply PS791-1PRO
Interfaces
• AC Power 3+PE
cable connector for
100 … 240 V AC feed
Input voltage
90 … 265 V AC at 47 … 63 Hz
AC/DC power supply, 10 W,
IP65 (-20 … +60°C),
input: 90 … 265 V AC ,
output: 24 V DC,
metal housing;
scope of supply:
AC power 3+PE cable connector,
DC power cord M12,
installation materials,
instruction manual
German/English
Output voltage
24 V DC, +-7 %, 0.42 A
Power M12 Plug PRO
Output power
10 W
System disturbances
Stored energy time at least 20 ms
at 230 V AC
Plug for connection to
PS791-1PRO power supply for
24 V DC supply voltage;
4-pole, A-coded,
with assembly instructions,
3 items
• M12 Plug PRO or
Power Cord M12 for
24 V DC output voltage
• On/Off switch
Permissible ambient conditions
• Operating temperature
• Transport/storage temperature
• Relative humidity
Approvals
-20°C … 60°C
-40°C … +85°C
100 %
EMC:
EN 55022 Class B,
EN 61000-4;
UL 1950, EN 60950;
Device failure
MTBF 600,000 h at full load,
25°C
Switching frequency
typ. 100 kHz
Degree of protection
IP65
Dimensions (W x H x D) in mm
125 x 60 x 130
Assembly
Wall/DIN rail mounting
(S7-300) directly on
SCALANCE devices
Weight
700 g
■ More information
8
You can order components supplementary to the
SIMATIC NET cabling range from your local contact.
Technical advice on this subject is available from:
J. Hertlein
I IA SC IC PRM 4
Phone +49 (0)911/750 44 65
E-mail: [email protected]
8/166
Siemens IK PI · 2012
AC Power 3+PE cable
connector
Order No.
6GK5 791-1PS00-0AA6
6GK1 907-0DB10-6AA3
6GK1 907-0FC10-0AA5
Connection socket for connection
of Power Supply PS791-1PRO
to AC voltage supply,
with assembly instructions,
5 items
Power cable 2 x 0.75
Connecting cable for
power supply PS791-1PRO,
sold by the meter
6XV1 812-8A
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
Power Supply PS791-2DC and PS791-2AC
■ Overview
PS791-2DC power supply adapter
• DC/DC power supply unit for input voltages from 12 to 24 V DC
and an output voltage of 18 V DC for all SCALANCE W786
devices
■ Design
•
•
•
•
Integral power supply adapter for SCALANCE W786
Fan-free design
Operating temperatures from -40 °C to +70 °C
Resistant to condensation
PS791-2AC power supply adapter
• AC/DC power supply unit for input voltages from 100 to 240 V
AC and an output voltage of 18 V DC for all SCALANCE W786
devices
■ Benefits
• The PS791-2DC and PS791-2AC power supply adapters are
designed specially for the SCALANCE W786 access points
and are integrated direct into these
• Global application due to wide input voltage range
• High reliability as power supply is short-circuit proof, secure
against no-load operation and is able to bridge short breaks
in the mains power
• When the power supply adapter and Power-over-Ethernet
(PoE) are used, redundant power supply of the access points
can be achieved
8
Siemens IK PI · 2012
8/167
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Accessories
Power Supply PS791-2DC and PS791-2AC
■ Technical specifications
Order No.
6GK5 791-2DC00-0AA0
6GK5 791-2AC00-0AA0
Product type designation
Power supply PS791-2DC
Power supply PS791-2AC
Interfaces
• Infeed: 4-pin screw terminal for DC Power
• Infeed: 3-pin screw terminal for AC Power
• Output voltage: 4-pin connector
• Output voltage: 4-pin connector
Input voltage
12 ... 24 V DC (min. 9 V DC, max. 32 V DC)
safety extra-low voltage (SELV)
100 ... 240 V AC, 45 ... 65 Hz
Output voltage
18 V DC
18 V DC
Output power
14.4 W
14.4 W
Mains buffering
–
> 20 ms
Permissible ambient conditions
• Operating temperature
-40 °C ... +70 °C
-40 °C ... +60 °C
Approvals
EMC:
EN 61000-6-2:2005,
EN 61000-6-3:2007
EMC:
EN 61000-6-2:2005,
EN 61000-6-3:2007
Safety regulations
EN 60950, UL 60950-1
EN 60950, UL 60950-1
Protection class
VDE 0805, VDE 0100
VDE 0805, VDE 0100
Degree of protection
IP65
IP65
Dimensions (W x H x D) in mm
133 x 45 x 30 mm
133 x 45 x 30 mm
Assembly
Installation in SCALANCE W786 and
HiPath Wireless Outdoor Access Points
Installation in SCALANCE W786 and
HiPath Wireless Outdoor Access Points
Weight
223 g
209 g
■ Ordering data
Power supply PS791-2DC
Order No.
6GK5 791-2DC00-0AA0
24 V DC power supply for
installation in SCALANCE W-786
products;
operating instructions in
German/English
Power supply PS791-2AC
8
110 V AC to 230 V AC power
supply for installation in the
SCALANCE W-786 products;
operating instructions
German/English
8/168
Siemens IK PI · 2012
6GK5 791-2AC00-0AA0
■ More information
You can order components supplementary to the
SIMATIC NET cabling range from your local contact.
Technical advice on this subject is available from:
J. Hertlein
I IA SC IC PRM 4
Phone +49 (0)911/750 44 65
E-mail: [email protected]
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Wireless Devices
SIMATIC Mobile Panel 277(F) IWLAN
■ Function
• Input/output fields
for displaying and changing of process values.
• Function keys
are used for directly triggering functions and actions.
Up to 16 functions can be configured simultaneously on
function keys. The function keys can also be used directly
as PROFINET IO.
The function keys can also be reconfigured as system keys.
A frequently used function such as "Acknowledge alarm" can
thus be assigned to a function key.
• Auxiliary operator controls
such as handwheels, key switches and illuminated
pushbuttons can be assigned with a variable or as a direct
actuation via PROFINET IO (direct keys).
• Buttons
are used for direct triggering of functions and actions. Up to
16 functions can be configured simultaneously on buttons.
• Graphics
can be used as symbols instead of text for "labeling" function
keys or buttons. They can also be used as full-screen
background images.
In the configuration software, a comprehensive library is
available containing graphics and a wide variety of objects.
All editors with an OLE interface can be used as graphics
editors (such as PaintShop, Designer or CorelDraw).
• Vector graphics
simple geometric basic forms (e.g. lines, circles and
rectangles) can be created directly in the configuration
software.
• Text fields
for labeling function keys, process displays, and process
values in any font size.
• Trend views and bars
are used for the graphic display of dynamic values.
• Display selection from the controller
permits operator prompting from the controller.
• Presentation of HTML documents with MS Pocket Internet
Explorer.
• Visual Basic Script, flexibility thanks to the implementation of
new functions including linking to variables (comparison
operations, loops, etc.).
• Language switching
16 online languages, 32 configuration languages incl. Asiatic
and Cyrillic character sets
- Language-dependent texts and graphics
• User administration (security)
- User-oriented access protection according to requirements
of specific sectors
- Authentication with user name and password
- User-group-specific rights
• Signaling system
- Discrete and analog alarms (edge alarms) as well as the
ALARM_S message frame procedure for SIMATIC S7
- Freely definable message classes (e.g. status/fault
messages) for definition of acknowledgment response and
display of alarm events
• Message buffer
- Non-volatile, maintenance-free and battery-free message
buffer. The messages remain stored when the mobile panel
has the battery removed as well
• Recipe management
- With additional data storage
(on optional MultiMedia Card/SD Card)
- Online/offline processing on the panel
- Storage of recipe data in standard Windows format (CSV)
- External processing using standard tools such as Excel and
Access is possible
• Help texts
for process images, messages and variables.
• Arithmetic functions
• Limit value monitoring
for reliable process control of inputs and outputs.
• Indicator lights
for machine and plant status indication.
• Scheduler
for cyclic function processing.
• Dynamic positioning of objects and dynamic showing/hiding
of objects
• Permanent window and template concept
- Creation of screen templates:
• Simple maintenance and configuration thanks to:
- Backup/restore of the project, operating system, recipe data
records and firmware on the optional standard multi-media
card/SD card
- Backup and restoration of configuration, operating system,
recipe data sets and firmware on a PC using ProSave
- Project transfer/return transfer via PROFINET/WLAN
- Automatic transfer detection
- Individual brightness setting
- Project simulation directly on the configuration computer
• WinCC flexible options
- [email protected] for remote operator control and monitoring of
SIMATIC HMI systems based on TCP/IP networks
- [email protected] for communication between HMI systems
based on TCP/IP networks. Remote access to recipe data
records, passwords and HMI system-specific information,
and much more. (Mobile Panel 277F IWLAN as server: View
only)
- OPC server: Communication with applications
(e.g. MES, ERP, or applications in the office sector) from
various manufacturers (see HMI software/runtime software
SIMATIC WinCC flexible/WinCC flexible RT options)
- Audit
Siemens IK PI · 2012
8/169
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Wireless Devices
SIMATIC Mobile Panel 277(F) IWLAN
■ Function (continued)
Configuration
Configuration is carried out with the SIMATIC WinCC flexible
Standard or Advanced configuration software (see
SIMATIC WinCC flexible HMI software/engineering software).
SIMATIC WinCC flexible is the logical further development of the
field-proven ProTool family. Projects generated using ProTool
can be easily migrated to WinCC. If WinCC flexible is started
directly from SIMATIC Manager, data in STEP 7 can be accessed
directly when the panel is configured. Duplicated data input and
data management is, therefore, avoided.
■ Integration
The SIMATIC Mobile Panel 277(F) IWLAN communicates
via the WLAN Standard IEEE 802.11 a(b/g) via PROFINET.
The Mobile Panel 277F IWLAN devices also support PROFIsafe
communication.
There are five device versions with V2:
For mobile operation and monitoring via WLAN:
• Mobile Panel 277 IWLAN V2
• Mobile Panel 277 IWLAN V2 with handwheel, key switch and
illuminated pushbuttons
As fail-safe device for safety-oriented operation as well:
• Mobile Panel 277F IWLAN V2 with acknowledgement button
and emergency stop button
• Mobile Panel 277F IWLAN V2 with acknowledgement button,
emergency stop button, handwheel, key switch and
illuminated pushbuttons
• Mobile Panel 277F IWLAN RFID Tag (for V2 only)
For the versions Mobile Panel 277F IWLAN (PROFIsafe),
the following system prerequisites apply:
• The Mobile Panel must be connected as a safe device
(PROFIsafe, Distributed Safety)
• Use of a SIMATIC F-CPU
5 GHz
frequency band
(IEEE 802.11a)
SIMATIC F-CPU
(Distributed
Safety)
Only WLAN
utilization
(HMI)
n
–
When using
transponders
!
–
When using
Profinet IO
n
–
277F IWLAN
(fail-safe)
!
!
277F IWLAN
(RFID Tag)
(fail-safe)
n
!
SIMATIC Mobile Panel
277 IWLAN
IWLAN infrastructure
8
The required IWLAN infrastructure is set up with the IWLAN
Access Points SCALANCE W-780, preferably with the version
SCALANCE W786-2RR, which fully supports all possible applications of the Mobile Panel 277(F) IWLAN. For operating a plant
without fail-safe communication, the version SCALANCE W7861PRO can also be used. The iPCF functionality (rapid roaming =
fast, uninterrupted switchover between several access points) is
only available with V2 panels upwards.
The Access Point provides an Industrial Ethernet interface for
connection to the wired network.
In addition to a reliable radio link, the SCALANCE W-780 Access
Points stand out due to their optimum support of standardized IT
mechanisms:
• IEEE 802.11b/ g/ a/ h for different frequency ranges
• IEEE 802.11e for multimedia, wireless multimedia (WMM) 1)
• IEEE 802.11i for security 1)
• Construction of redundant networks with the Rapid Spanning
Tree Protocol (RSTP)
• Virtual networks (VLAN) to logically separate, for example,
different user groups
• Sending the log entries of the SCALANCE W devices to a
Syslog server
Wireless approvals
Only those wireless approvals printed on the mobile panel apply.
Planned wireless approvals for all SIMATIC products can be
found on the Internet at:
www.siemens.com/wireless-approvals
1)
Not supported by Mobile Panel Wireless
8/170
Siemens IK PI · 2012
n
= Recommended
! = Requirement
– = Not required
The Mobile Panel 277(F) IWLAN can be connected to:
• SIMATIC S7-200/-300/-400 (one F-CPU required for
integrating the Mobile Panel 277F IWLAN and SIMOTION
(Mobile Panel 277 IWLAN V2 or higher, or Mobile Panel
277FIWLAN V2 or higher (WinCC flexible 2008 SP3 or higher))
Note:
Further information can be found under "System interfaces".
The Function Manuals "Fail-Safe Operation of the Mobile Panel
277F IWLAN" are available for downloading in English, German,
and Japanese.
http://support.automation.siemens.com/WW/view/en/31255853
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Wireless Devices
SIMATIC Mobile Panel 277(F) IWLAN
■ Technical specifications
6AV6 645-0DD010AX1
6AV6 645-0DE010AX1
6AV6 645-0EB010AX1
6AV6 645-0EC010AX1
6AV6 645-0EF010AX1
Display
Size
7.5"
7.5"
7.5"
7.5"
7.5"
Display type
TFT, 65536 colors
TFT, 65536 colors
TFT, 65536 colors
TFT, 65536 colors
TFT, 65536 colors
Resolution (pixels)
• Resolution (WxH in pixel)
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
Backlighting
• MTBF backlighting (at 25 °C)
about 50,000 hours
about 50,000 hours
about 50,000 hours
about 50,000 hours
about 50,000 hours
Control elements
Operating options
Keys and Touch
Keys and Touch
Keys and Touch
Keys and Touch
Keys and Touch
Function keys, programmable
18 function keys,
18 with LEDs
18 function keys,
18 with LEDs
18 function keys,
18 with LEDs
18 function keys,
18 with LEDs
18 function keys,
18 with LEDs
Connection for mouse/keyboard/
barcode reader
USB / USB / USB
USB / USB / USB
USB / USB / USB
USB / USB / USB
USB / USB / USB
Keyboard fonts
• Numeric/alphabetical input
Yes / Yes
Yes / Yes
Yes / Yes
Yes / Yes
Yes / Yes
Touch operation
• Touch screen
Analog, resistive
Analog, resistive
Analog, resistive
Analog, resistive
Analog, resistive
2-channel,
positive latching
2-channel, number
of positions: 3
2-channel,
positive latching
2-channel, number
of positions: 3
Yes, 3 switch
settings
Yes
Yes
2-channel,
positive latching
2-channel, number
of positions: 3
Yes, 3 switch
settings
Yes
Yes
Special operator controls
• Emergency stop button
• Acknowledgement button
• Key-operated switch
Yes, 3 switch
settings
Yes
Yes
• Illuminated pushbutton
• Handwheel
Expansions for operator control
of the process
• DP direct LEDs (LEDs as
S7 output I/O)
• DP direct keys (screen buttons
and keys as S7 input I/O )
F1...F18
F1...F18
F1...F18
F1...F18
F1...F18
F1...F18,
number of bytes for
configurable keys:
10
F1...F18,
number of bytes for
configurable keys:
10
F1...F18,
number of bytes for
configurable keys:
10
F1...F18,
number of bytes for
configurable keys:
10
F1...F18,
number of bytes for
configurable keys:
10
Supply voltage
Supply voltage
DC
DC
DC
DC
DC
Via charging station
Yes
Yes
Yes
Yes
Yes
Via table power supply
Yes
Yes
Yes
Yes
Yes
Main battery
Rated voltage
7.2 V
7.2 V
7.2 V
7.2 V
7.2 V
Capacity
5 100 mA·h
5 100 mA·h
5 100 mA·h
5 100 mA·h
5 100 mA·h
Number of loading cycles, min
500
500
500
500
500
Charging time, typ.
4h
4h
4h
4h
4h
Operating time, typ.
4h
4h
4h
4h
4h
Display for battery capacity
Yes
Yes
Yes
Yes
Yes
Energy-saving mode
Yes
Yes
Yes
Yes
Yes
Battery replacement during
operation
Yes
Yes
Yes
Yes
Yes
Processor
Processor
ARM, 520 MHz
ARM, 520 MHz
ARM, 520 MHz
ARM, 520 MHz
ARM, 520 MHz
Memory
Type
Flash / RAM
Flash / RAM
Flash / RAM
Flash / RAM
Flash / RAM
6 MB usable
memory for user
data
6 MB usable
memory for user
data
6 MB usable
memory for user
data
6 MB usable
memory for user
data
6 MB usable
memory for user
data
Usable memory for user data
Siemens IK PI · 2012
8
8/171
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Wireless Devices
SIMATIC Mobile Panel 277(F) IWLAN
■ Technical specifications (continued)
Type of output
Status LEDs
6AV6 645-0DD010AX1
6AV6 645-0DE010AX1
6AV6 645-0EB010AX1
6AV6 645-0EC010AX1
6AV6 645-0EF010AX1
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
LED for safe
LED for communication
Yes
Yes
Yes
Yes
Yes
LED for battery
Yes
Yes
Yes
Yes
Yes
Vibrations
Yes
Yes
Yes
Yes
Yes
Hardware clock,
battery backup,
synchronizable
Hardware clock,
battery backup,
synchronizable
Hardware clock,
battery backup,
synchronizable
Hardware clock,
battery backup,
synchronizable
Hardware clock,
battery backup,
synchronizable
Interfaces
Interfaces
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
USB port
1 x USB
1 x USB
1 x USB
1 x USB
1 x USB
Multi Media Card slot
1 MMC/SD card slot
1 MMC/SD card slot
1 MMC/SD card slot
1 MMC/SD card slot
1 MMC/SD card slot
1 x Ethernet (RJ45)
Yes
according to
IEEE 802.11a
Channel 34,
channel 36,
channel 38,
channel 40,
channel 42,
channel 44,
channel 46,
channel 48,
channel 52,
channel 56,
channel 60,
channel 64,
channel 149,
channel 153,
channel 157,
channel 161
Channels 1 to 11,
channel 12,
channel 13,
channel 14
Australia, Austria,
Belgium, Bulgaria,
Canada, China,
Cyprus, Denmark,
Estonia, Finland,
France, Germany,
UK, Greece,
Hungary, Ireland,
Iceland, Italy,
Japan, Latvia,
Liechtenstein,
Lithuania,
Luxemburg, Malta,
the Netherlands,
Norway, Poland,
Portugal, Rumania,
Sweden,
Switzerland,
Slovakia, Slovenia,
Spain, South Korea,
South Africa,
Taiwan, Czech
Republic, Turkey
WEP, WPA
Yes
1 x Ethernet (RJ45)
Yes
according to
IEEE 802.11a
Channel 34,
channel 36,
channel 38,
channel 40,
channel 42,
channel 44,
channel 46,
channel 48,
channel 52,
channel 56,
channel 60,
channel 64,
channel 149,
channel 153,
channel 157,
channel 161
Channels 1 to 11,
channel 12,
channel 13,
channel 14
Australia, Austria,
Belgium, Bulgaria,
Canada, China,
Cyprus, Denmark,
Estonia, Finland,
France, Germany,
UK, Greece,
Hungary, Ireland,
Iceland, Italy,
Japan, Latvia,
Liechtenstein,
Lithuania,
Luxemburg, Malta,
the Netherlands,
Norway, Poland,
Portugal, Rumania,
Sweden,
Switzerland,
Slovakia, Slovenia,
Spain, South Korea,
South Africa,
Taiwan, Czech
Republic, Turkey
WEP, WPA
Yes
1 x Ethernet (RJ45)
Yes
according to
IEEE 802.11a
Channel 34,
channel 36,
channel 38,
channel 40,
channel 42,
channel 44,
channel 46,
channel 48,
channel 52,
channel 56,
channel 60,
channel 64,
channel 149,
channel 153,
channel 157,
channel 161
Channels 1 to 11,
channel 12,
channel 13,
channel 14
Australia, Austria,
Belgium, Bulgaria,
Canada, China,
Cyprus, Denmark,
Estonia, Finland,
France, Germany,
UK, Greece,
Hungary, Ireland,
Iceland, Italy,
Japan, Latvia,
Liechtenstein,
Lithuania,
Luxemburg, Malta,
the Netherlands,
Norway, Poland,
Portugal, Rumania,
Sweden,
Switzerland,
Slovakia, Slovenia,
Spain, South Korea,
South Africa,
Taiwan, Czech
Republic, Turkey
WEP, WPA
Yes
1 x Ethernet (RJ45)
Yes
according to
IEEE 802.11a
Channel 34,
channel 36,
channel 38,
channel 40,
channel 42,
channel 44,
channel 46,
channel 48,
channel 52,
channel 56,
channel 60,
channel 64,
channel 149,
channel 153,
channel 157,
channel 161
Channels 1 to 11,
channel 12,
channel 13,
channel 14
Australia, Austria,
Belgium, Bulgaria,
Canada, China,
Cyprus, Denmark,
Estonia, Finland,
France, Germany,
UK, Greece,
Hungary, Ireland,
Iceland, Italy,
Japan, Latvia,
Liechtenstein,
Lithuania,
Luxemburg, Malta,
the Netherlands,
Norway, Poland,
Portugal, Rumania,
Sweden,
Switzerland,
Slovakia, Slovenia,
Spain, South Korea,
South Africa,
Taiwan, Czech
Republic, Turkey
WEP, WPA
Yes
1 x Ethernet (RJ45)
Yes
according to
IEEE 802.11a
Channel 34,
channel 36,
channel 38,
channel 40,
channel 42,
channel 44,
channel 46,
channel 48,
channel 52,
channel 56,
channel 60,
channel 64,
channel 149,
channel 153,
channel 157,
channel 161
Channels 1 to 11,
channel 12,
channel 13,
channel 14
Australia, Austria,
Belgium, Bulgaria,
Canada, China,
Cyprus, Denmark,
Estonia, Finland,
France, Germany,
UK, Greece,
Hungary, Ireland,
Iceland, Italy,
Japan, Latvia,
Liechtenstein,
Lithuania,
Luxemburg, Malta,
the Netherlands,
Norway, Poland,
Portugal, Rumania,
Sweden,
Switzerland,
Slovakia, Slovenia,
Spain, South Korea,
South Africa,
Taiwan, Czech
Republic, Turkey
WEP, WPA
Yes
Time of day
Clock
• Type
Industrial Ethernet
• Industrial Ethernet interface
• Wireless LAN
• Supports standards
• Supported channels
(according to IEEE 802.11a)
8
• Supported channels
(according to IEEE 802.11b and
IEEE 802.1g)
• Country approval (radio)
• Encryption
• Supports rapid roaming
8/172
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Wireless Devices
SIMATIC Mobile Panel 277(F) IWLAN
■ Technical specifications (continued)
6AV6 645-0DD010AX1
6AV6 645-0DE010AX1
6AV6 645-0EB010AX1
6AV6 645-0EC010AX1
6AV6 645-0EF010AX1
Protocols
PROFINET
Yes
Yes
Yes
Yes
Yes
Supports protocol for PROFINET IO
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Supports protocol for PROFIsafe
EMC
Emission of radio interference
acc. to EN 55 011
• Emission of radio interferences
acc. to EN 55 011 (limit class A)
Yes;
The product is
designed for use in
industrial environments. When used
in residential areas,
the emission of
radio interference
according to limit
class B of EN 55011
must be ensured.
For further information refer to the
user documentation
Yes;
The product is
designed for use in
industrial environments. When used
in residential areas,
the emission of
radio interference
according to limit
class B of EN 55011
must be ensured.
For further information refer to the
user documentation
Yes;
The product is
designed for use in
industrial environments. When used
in residential areas,
the emission of
radio interference
according to limit
class B of EN 55011
must be ensured.
For further information refer to the
user documentation
Yes;
The product is
designed for use in
industrial environments. When used
in residential areas,
the emission of
radio interference
according to limit
class B of EN 55011
must be ensured.
For further information refer to the
user documentation
Yes;
The product is
designed for use in
industrial environments. When used
in residential areas,
the emission of
radio interference
according to limit
class B of EN 55011
must be ensured.
For further information refer to the
user documentation
Ambient conditions
Operating temperature
• Operation
0 °C to +40 °C
0 °C to +40 °C
0 °C to +40 °C
0 °C to +40 °C
0 °C to +40 °C
Storage/transport temperature
• Transport, storage
-20 °C to +60 °C
-20 °C to +60 °C
-20 °C to +60 °C
-20 °C to +60 °C
-20 °C to +60 °C
Relative humidity
• max. relative humidity
80 %
80 %
80 %
80 %
80 %
Drop height
1.2 m
1.2 m
1.2 m
1.2 m
1.2 m
Degree and class of protection
IP65 enclosure
Yes
Yes
Yes
Yes
Yes
Standards, approvals, certificates
Certifications
CE, cULus, C-TICK
CE, cULus, C-TICK
CE, cULus, C-TICK
CE, cULus, C-TICK
CE, cULus, C-TICK
TÜV safety certification
Yes
Yes
Yes
Safety Integrity Level to IEC 61508
3
3
3
Performance level acc. to
EN ISO 13849-1
e
e
e
Safety category
according to EN 954-1
Safety category
according to
EN 954-1
(enabling button,
STOP button if
present) 4
Safety category
according to
EN 954-1
(enabling button,
STOP button if
present) 4
Safety category
according to
EN 954-1
(enabling button,
STOP button if
present) 4
Operating systems
Operating system
Configuration
Configuration software
• Configuration tool
Windows CE
Windows CE
Windows CE
Windows CE
Windows CE
WinCC flexible
Standard Version
2008 SP2 and
higher (to be
ordered separately)
WinCC flexible
Standard Version
2008 SP2 and
higher (to be
ordered separately)
WinCC flexible
Standard Version
2008 SP2 and
higher (to be
ordered separately)
WinCC flexible
Standard Version
2008 SP2 and
higher (to be
ordered separately)
WinCC flexible
Standard Version
2008 SP2 and
higher (to be
ordered separately)
Siemens IK PI · 2012
8/173
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Wireless Devices
SIMATIC Mobile Panel 277(F) IWLAN
■ Technical specifications (continued)
6AV6 645-0DD010AX1
6AV6 645-0DE010AX1
6AV6 645-0EB010AX1
6AV6 645-0EC010AX1
6AV6 645-0EF010AX1
Internet Explorer,
[email protected],
[email protected]
Internet Explorer,
[email protected],
[email protected]
Internet Explorer,
[email protected],
[email protected]
Internet Explorer,
[email protected],
[email protected]
Internet Explorer,
[email protected],
[email protected]
Number of Visual Basic Scripts
50
50
50
50
50
Task planner
Yes
Yes
Yes
Yes
Yes
Help system
Yes
Yes
Yes
Yes
Yes
Status/control
With SIMATIC S7
With SIMATIC S7
With SIMATIC S7
With SIMATIC S7
With SIMATIC S7
4 000
Yes
Yes
Ring buffer
(n x 512 entries),
retentive, maintenance-free
4 000
Yes
Yes
Ring buffer
(n x 512 entries),
retentive, maintenance-free
4 000
Yes
Yes
Ring buffer
(n x 512 entries),
retentive, maintenance-free
4 000
Yes
Yes
Ring buffer
(n x 512 entries),
retentive, maintenance-free
4 000
Yes
Yes
Ring buffer
(n x 512 entries),
retentive, maintenance-free
300
500
1000
64 KB integrated
Flash, expandable
300
500
1000
64 KB integrated
Flash, expandable
300
500
1000
64 KB integrated
Flash, expandable
300
500
1000
64 KB integrated
Flash, expandable
300
500
1000
64 KB integrated
Flash, expandable
500
2 048
Yes
Yes
500
2 048
Yes
Yes
500
2 048
Yes
Yes
500
2 048
Yes
Yes
500
2 048
Yes
Yes
10,000 text
elements
Bit maps, icons,
vector graphics
Diagrams, bar
graphs, sliders,
analog display,
invisible buttons
10,000 text
elements
Bit maps, icons,
vector graphics
Diagrams, bar
graphs, sliders,
analog display,
invisible buttons
10,000 text
elements
Bit maps, icons,
vector graphics
Diagrams, bar
graphs, sliders,
analog display,
invisible buttons
10,000 text
elements
Bit maps, icons,
vector graphics
Diagrams, bar
graphs, sliders,
analog display,
invisible buttons
10,000 text
elements
Bit maps, icons,
vector graphics
Diagrams, bar
graphs, sliders,
analog display,
invisible buttons
500
400
Yes
500
400
Yes
500
400
Yes
500
400
Yes
500
400
Yes
20
20
20
20
20
20
20
20
20
20
10 000
Multi Media Card
10 000
Multi Media Card
10 000
Multi Media Card
10 000
Multi Media Card
10 000
Multi Media Card
Security
• Number of user groups
• Passwords exportable
• Number of user rights
50
Yes
32
50
Yes
32
50
Yes
32
50
Yes
32
50
Yes
32
Data carrier support
• Multi Media Card
Yes
Yes
Yes
Yes
Yes
Alarms, report
(shift report),
PROFINET
Alarms, report
(shift report),
PROFINET
Alarms, report
(shift report),
PROFINET
Alarms, report
(shift report),
PROFINET
Alarms, report
(shift report),
PROFINET
Functionality
under WinCC flexible
Applications/options
With alarm logging system
(incl. buffer and acknowledgment)
• Number of messages
• Bit messages
• Analog messages
• Message buffer
Recipes
• Recipes
• Data records per recipe
• Entries per data record
• Recipe memory
Number of process images
• Process images
• Variables
• Limit values
• Multiplexing
Image elements
• Text objects
• Graphics object
• dynamic objects
8
Lists
• Text lists
• Graphics list
• Libraries
Archiving
• Number of archives per project
• Number of measuring points per
project
• Number of entries per archive
• Memory location
Logging
• Recording/Printing
8/174
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Wireless Devices
SIMATIC Mobile Panel 277(F) IWLAN
■ Technical specifications (continued)
Languages
• Languages
• Character sets
Transfer (upload/download)
• Transfer of configuration
• Wireless LAN
Process coupling
• Connection to controller
• Zones
- Number of zones per project,
max.
- Number of transponders for
zones per project, max.
• Effective range
- Number of effective ranges per
project, max.
- Number of transponders for
effective ranges per project,
max.
• Transponder
- Number of transponders per
project, max.
- Adjustable distance range
- Adjustable distance, min.
- Adjustable distance, max.
6AV6 645-0DD010AX1
6AV6 645-0DE010AX1
6AV6 645-0EB010AX1
6AV6 645-0EC010AX1
6AV6 645-0EF010AX1
D, GB, F, I, E, CHN
"traditional", CHN
"simplified", DK,
FIN, GR, J, KP /
ROK, NL, N, PL, P,
RUS, S, CZ / SK,
TR, H
Tahoma, Arial,
Courier New,
WinCC flexible
Standard,
ideographic
languages,
all freely scalable
D, GB, F, I, E, CHN
"traditional", CHN
"simplified", DK,
FIN, GR, J, KP /
ROK, NL, N, PL, P,
RUS, S, CZ / SK,
TR, H
Tahoma, Arial,
Courier New,
WinCC flexible
Standard,
ideographic
languages,
all freely scalable
D, GB, F, I, E, CHN
"traditional", CHN
"simplified", DK,
FIN, GR, J, KP /
ROK, NL, N, PL, P,
RUS, S, CZ / SK,
TR, H
Tahoma, Arial,
Courier New,
WinCC flexible
Standard,
ideographic
languages,
all freely scalable
D, GB, F, I, E, CHN
"traditional", CHN
"simplified", DK,
FIN, GR, J, KP /
ROK, NL, N, PL, P,
RUS, S, CZ / SK,
TR, H
Tahoma, Arial,
Courier New,
WinCC flexible
Standard,
ideographic
languages,
all freely scalable
D, GB, F, I, E, CHN
"traditional", CHN
"simplified", DK,
FIN, GR, J, KP /
ROK, NL, N, PL, P,
RUS, S, CZ / SK,
TR, H
Tahoma, Arial,
Courier New,
WinCC flexible
Standard,
ideographic
languages,
all freely scalable
USB, Ethernet,
automatic transfer
recognition
Yes
USB, Ethernet,
automatic transfer
recognition
Yes
USB, Ethernet,
automatic transfer
recognition
Yes
USB, Ethernet,
automatic transfer
recognition
Yes
USB, Ethernet,
automatic transfer
recognition
Yes
S7-200, S7- 300/400
see section on
"System interfaces"
Yes
254
S7-200, S7- 300/400
see section on
"System interfaces"
Yes
254
S7-200, S7- 300/400
see section on
"System interfaces"
Yes
254
S7-200, S7- 300/400
see section on
"System interfaces"
Yes
254
S7-200, S7- 300/400
see section on
"System interfaces"
255
255
255
255
Yes
127
Yes
127
127
127
Yes
127
Yes
256
Yes
256
Yes
256
Yes
256
Yes
2m
8m
Yes
2m
8m
Yes
2m
8m
Yes
2m
8m
I/O
I/O devices
Barcode reader
Barcode reader
Barcode reader
Barcode reader
Barcode reader
Mechanics/material
Type of housing (front)
Plastic
Plastic
Plastic
Plastic
Plastic
Dia 290 mm /
D 103 mm
Dia 290 mm /
D 103 mm
Dia 290 mm /
D 103 mm
Dia 290 mm /
D 103 mm
Dia 290 mm /
D 103 mm
2.2 kg
2.2 kg
2.2 kg
2.2 kg
2.2 kg
Dimensions and weight
Dimensions
• Housing diameter/depth (mm)
Weight
• Weight
8
Siemens IK PI · 2012
8/175
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Wireless Devices
SIMATIC Mobile Panel 277(F) IWLAN
■ Technical specifications (continued)
6AV6 645-0FD010AX1
6AV6 645-0FE010AX1
6AV6 645-0GB010AX1
6AV6 645-0GC010AX1
6AV6 645-0GF010AX1
Display
Size
7.5"
7.5"
7.5"
7.5"
7.5"
Display type
TFT, 65536 colors
TFT, 65536 colors
TFT, 65536 colors
TFT, 65536 colors
TFT, 65536 colors
Resolution (pixels)
• Resolution (WxH in pixel)
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
Backlighting
• MTBF backlighting (at 25 °C)
about 50,000 hours
about 50,000 hours
about 50,000 hours
about 50,000 hours
about 50,000 hours
Control elements
Operating options
Keys and Touch
Keys and Touch
Keys and Touch
Keys and Touch
Keys and Touch
Function keys, programmable
18 function keys,
18 with LEDs
18 function keys,
18 with LEDs
18 function keys,
18 with LEDs
18 function keys,
18 with LEDs
18 function keys,
18 with LEDs
Connection for mouse/keyboard/
barcode reader
USB / USB / USB
USB / USB / USB
USB / USB / USB
USB / USB / USB
USB / USB / USB
Keyboard fonts
• Numeric/alphabetical input
Yes / Yes
Yes / Yes
Yes / Yes
Yes / Yes
Yes / Yes
Touch operation
• Touch screen
Analog, resistive
Analog, resistive
Analog, resistive
Analog, resistive
Analog, resistive
2-channel, positive
latching
2-channel, number
of positions: 3
2-channel, positive
latching
2-channel, number
of positions: 3
Yes, 3 switch
settings
Yes
Yes
2-channel, positive
latching
2-channel, number
of positions: 3
Yes, 3 switch
settings
Yes
Yes
Special operator controls
• Emergency stop button
• Acknowledgement button
• Key-operated switch
Yes, 3 switch
settings
Yes
Yes
• Illuminated pushbutton
• Handwheel
Expansions for operator control
of the process
• DP direct LEDs (LEDs as
S7 output I/O)
• DP direct keys (screen buttons
and keys as S7 input I/O )
8
F1...F18
F1...F18
F1...F18
F1...F18
F1...F18
F1...F18,
number of bytes for
configurable keys:
10
F1...F18,
number of bytes for
configurable keys:
10
F1...F18,
number of bytes for
configurable keys:
10
F1...F18,
number of bytes for
configurable keys:
10
F1...F18,
number of bytes for
configurable keys:
10
Supply voltage
Supply voltage
DC
DC
DC
DC
DC
Via charging station
Yes
Yes
Yes
Yes
Yes
Via table power supply
Yes
Yes
Yes
Yes
Yes
Main battery
Rated voltage
7.2 V
7.2 V
7.2 V
7.2 V
7.2 V
Capacity
5 100 mA·h
5 100 mA·h
5 100 mA·h
5 100 mA·h
5 100 mA·h
Number of loading cycles, min
500
500
500
500
500
Charging time, typ.
4h
4h
4h
4h
4h
Operating time, typ.
4h
4h
4h
4h
4h
Display for battery capacity
Yes
Yes
Yes
Yes
Yes
Energy-saving mode
Yes
Yes
Yes
Yes
Yes
Battery replacement during
operation
Yes
Yes
Yes
Yes
Yes
ARM, 520 MHz
ARM, 520 MHz
ARM, 520 MHz
ARM, 520 MHz
ARM, 520 MHz
Processor
Processor
8/176
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Wireless Devices
SIMATIC Mobile Panel 277(F) IWLAN
■ Technical specifications (continued)
Memory
Type
Usable memory for user data
Type of output
Status LEDs
6AV6 645-0FD010AX1
6AV6 645-0FE010AX1
6AV6 645-0GB010AX1
6AV6 645-0GC010AX1
6AV6 645-0GF010AX1
Flash / RAM
Flash / RAM
Flash / RAM
Flash / RAM
Flash / RAM
6 MB usable
memory for user
data
6 MB usable
memory for user
data
6 MB usable
memory for user
data
6 MB usable
memory for user
data
6 MB usable
memory for user
data
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
LED for safe
LED for communication
Yes
Yes
Yes
Yes
Yes
LED for battery
Yes
Yes
Yes
Yes
Yes
Vibrations
Yes
Yes
Yes
Yes
Yes
Hardware clock,
battery backup,
synchronizable
Hardware clock,
battery backup,
synchronizable
Hardware clock,
battery backup,
synchronizable
Hardware clock,
battery backup,
synchronizable
Hardware clock,
battery backup,
synchronizable
Interfaces
Interfaces
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
USB port
1 x USB
1 x USB
1 x USB
1 x USB
1 x USB
Multi Media Card slot
1 MMC/SD card slot
1 MMC/SD card slot
1 MMC/SD card slot
1 MMC/SD card slot
1 MMC/SD card slot
• Country approval (radio)
• Encryption
• Supports rapid roaming
1 x Ethernet (RJ45)
Yes
according to
IEEE 802.11a
Channel 34,
channel 36,
channel 38,
channel 40,
channel 42,
channel 44,
channel 46,
channel 48,
channel 52,
channel 56,
channel 60,
channel 64,
channel 149,
channel 153,
channel 157,
channel 161
Channels 1 to 11,
channel 12,
channel 13,
channel 14
USA, Canada
WEP, WPA
Yes
1 x Ethernet (RJ45)
Yes
according to
IEEE 802.11a
Channel 34,
channel 36,
channel 38,
channel 40,
channel 42,
channel 44,
channel 46,
channel 48,
channel 52,
channel 56,
channel 60,
channel 64,
channel 149,
channel 153,
channel 157,
channel 161
Channels 1 to 11,
channel 12,
channel 13,
channel 14
USA, Canada
WEP, WPA
Yes
1 x Ethernet (RJ45)
Yes
according to
IEEE 802.11a
Channel 34,
channel 36,
channel 38,
channel 40,
channel 42,
channel 44,
channel 46,
channel 48,
channel 52,
channel 56,
channel 60,
channel 64,
channel 149,
channel 153,
channel 157,
channel 161
Channels 1 to 11,
channel 12,
channel 13,
channel 14
USA, Canada
WEP, WPA
Yes
1 x Ethernet (RJ45)
Yes
according to
IEEE 802.11a
Channel 34,
channel 36,
channel 38,
channel 40,
channel 42,
channel 44,
channel 46,
channel 48,
channel 52,
channel 56,
channel 60,
channel 64,
channel 149,
channel 153,
channel 157,
channel 161
Channels 1 to 11,
channel 12,
channel 13,
channel 14
USA, Canada
WEP, WPA
Yes
1 x Ethernet (RJ45)
Yes
according to
IEEE 802.11a
Channel 34,
channel 36,
channel 38,
channel 40,
channel 42,
channel 44,
channel 46,
channel 48,
channel 52,
channel 56,
channel 60,
channel 64,
channel 149,
channel 153,
channel 157,
channel 161
Channels 1 to 11,
channel 12,
channel 13,
channel 14
USA, Canada
WEP, WPA
Yes
Protocols
PROFINET
Yes
Yes
Yes
Yes
Yes
Supports protocol for PROFINET IO
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Time of day
Clock
• Type
Industrial Ethernet
• Industrial Ethernet interface
• Wireless LAN
• Supports standards
• Supported channels
(according to IEEE 802.11a)
• Supported channels (according to
IEEE 802.11b and IEEE 802.1g)
Supports protocol for PROFIsafe
Siemens IK PI · 2012
8/177
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Wireless Devices
SIMATIC Mobile Panel 277(F) IWLAN
■ Technical specifications (continued)
6AV6 645-0FD010AX1
6AV6 645-0FE010AX1
6AV6 645-0GB010AX1
6AV6 645-0GC010AX1
6AV6 645-0GF010AX1
Yes; The product is
designed for use in
industrial environments. When used
in residential areas,
the emission of
radio interference
according to limit
class B of EN 55011
must be ensured.
For further information refer to the
user documentation
Yes; The product is
designed for use in
industrial environments. When used
in residential areas,
the emission of
radio interference
according to limit
class B of EN 55011
must be ensured.
For further information refer to the
user documentation
Yes; The product is
designed for use in
industrial environments. When used
in residential areas,
the emission of
radio interference
according to limit
class B of EN 55011
must be ensured.
For further information refer to the
user documentation
Yes; The product is
designed for use in
industrial environments. When used
in residential areas,
the emission of
radio interference
according to limit
class B of EN 55011
must be ensured.
For further information refer to the
user documentation
Yes; The product is
designed for use in
industrial environments. When used
in residential areas,
the emission of
radio interference
according to limit
class B of EN 55011
must be ensured.
For further information refer to the
user documentation
Ambient conditions
Operating temperature
• Operation
0 °C to +40 °C
0 °C to +40 °C
0 °C to +40 °C
0 °C to +40 °C
0 °C to +40 °C
Storage/transport temperature
• Transport, storage
-20 °C to +60 °C
-20 °C to +60 °C
-20 °C to +60 °C
-20 °C to +60 °C
-20 °C to +60 °C
Relative humidity
• max. relative humidity
80 %
80 %
80 %
80 %
80 %
Drop height
1.2 m
1.2 m
1.2 m
1.2 m
1.2 m
Degree and class of protection
IP65 enclosure
Yes
Yes
Yes
Yes
Yes
Standards, approvals, certificates
Certifications
CE, cULus, C-TICK
CE, cULus, C-TICK
EMC
Emission of radio interference
acc. to EN 55 011
• Emission of radio interferences
acc. to EN 55 011 (limit class A)
8
CE, cULus, C-TICK
CE, cULus, C-TICK
CE, cULus, C-TICK
TÜV safety certification
Yes
Yes
Yes
Safety Integrity Level to IEC 61508
3
3
3
Performance level acc. to
EN ISO 13849-1
e
e
e
Safety category
according to EN 954-1
Safety category
according to
EN 954-1 (
enabling button,
STOP button if
present) 4
Safety category
according to
EN 954-1
(enabling button,
STOP button if
present) 4
Safety category
according to
EN 954-1
(enabling button,
STOP button if
present) 4
Operating systems
Operating system
Windows CE
Windows CE
Windows CE
Windows CE
Windows CE
WinCC flexible
Standard Version
2008 SP2 and
higher (to be
ordered separately)
WinCC flexible
Standard Version
2008 SP2 and
higher (to be
ordered separately)
WinCC flexible
Standard Version
2008 SP2 and
higher (to be
ordered separately)
WinCC flexible
Standard Version
2008 SP2 and
higher (to be
ordered separately)
WinCC flexible
Standard Version
2008 SP2 and
higher (to be
ordered separately)
Internet Explorer,
[email protected],
[email protected]
Internet Explorer,
[email protected],
[email protected]
Internet Explorer,
[email protected],
[email protected]
Internet Explorer,
[email protected],
[email protected]
Internet Explorer,
[email protected],
[email protected]
Number of Visual Basic Scripts
50
50
50
50
50
Task planner
Yes
Yes
Yes
Yes
Yes
Help system
Yes
Yes
Yes
Yes
Yes
Status/control
With SIMATIC S7
With SIMATIC S7
With SIMATIC S7
With SIMATIC S7
With SIMATIC S7
4 000
Yes
Yes
Ring buffer (n x 512
entries), retentive,
maintenance-free
4 000
Yes
Yes
Ring buffer (n x 512
entries), retentive,
maintenance-free
4 000
Yes
Yes
Ring buffer (n x 512
entries), retentive,
maintenance-free
4 000
Yes
Yes
Ring buffer (n x 512
entries), retentive,
maintenance-free
4 000
Yes
Yes
Ring buffer (n x 512
entries), retentive,
maintenance-free
Configuration
Configuration software
• Configuration tool
Functionality
under WinCC flexible
Applications/options
With alarm logging system
(incl. buffer and acknowledgment)
• Number of messages
• Bit messages
• Analog messages
• Message buffer
8/178
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Wireless Devices
SIMATIC Mobile Panel 277(F) IWLAN
■ Technical specifications (continued)
6AV6 645-0FD010AX1
6AV6 645-0FE010AX1
6AV6 645-0GB010AX1
6AV6 645-0GC010AX1
6AV6 645-0GF010AX1
300
500
1000
64 KB integrated
Flash, expandable
300
500
1000
64 KB integrated
Flash, expandable
300
500
1000
64 KB integrated
Flash, expandable
300
500
1000
64 KB integrated
Flash, expandable
300
500
1000
64 KB integrated
Flash, expandable
500
2 048
Yes
Yes
500
2 048
Yes
Yes
500
2 048
Yes
Yes
500
2 048
Yes
Yes
500
2 048
Yes
Yes
10,000 text
elements
Bit maps, icons,
vector graphics
Diagrams, bar
graphs, sliders,
analog display,
invisible buttons
10,000 text
elements
Bit maps, icons,
vector graphics
Diagrams, bar
graphs, sliders,
analog display,
invisible buttons
10,000 text
elements
Bit maps, icons,
vector graphics
Diagrams, bar
graphs, sliders,
analog display,
invisible buttons
10,000 text
elements
Bit maps, icons,
vector graphics
Diagrams, bar
graphs, sliders,
analog display,
invisible buttons
10,000 text
elements
Bit maps, icons,
vector graphics
Diagrams, bar
graphs, sliders,
analog display,
invisible buttons
500
400
Yes
500
400
Yes
500
400
Yes
500
400
Yes
500
400
Yes
20
20
20
20
20
20
20
20
20
20
10 000
Multi Media Card
10 000
Multi Media Card
10 000
Multi Media Card
10 000
Multi Media Card
10 000
Multi Media Card
Security
• Number of user groups
• Passwords exportable
• Number of user rights
50
Yes
32
50
Yes
32
50
Yes
32
50
Yes
32
50
Yes
32
Data carrier support
• Multi Media Card
Yes
Yes
Yes
Yes
Yes
Alarms, report (shift
report), PROFINET
Alarms, report (shift
report), PROFINET
Alarms, report (shift
report), PROFINET
Alarms, report (shift
report), PROFINET
Alarms, report (shift
report), PROFINET
D, GB, F, I, E, CHN
"traditional", CHN
"simplified", DK,
FIN, GR, J, KP /
ROK, NL, N, PL, P,
RUS, S, CZ / SK,
TR, H
D, GB, F, I, E, CHN
"traditional", CHN
"simplified", DK,
FIN, GR, J, KP /
ROK, NL, N, PL, P,
RUS, S, CZ / SK,
TR, H
D, GB, F, I, E, CHN
"traditional", CHN
"simplified", DK,
FIN, GR, J, KP /
ROK, NL, N, PL, P,
RUS, S, CZ / SK,
TR, H
D, GB, F, I, E, CHN
"traditional", CHN
"simplified", DK,
FIN, GR, J, KP /
ROK, NL, N, PL, P,
RUS, S, CZ / SK,
TR, H
D, GB, F, I, E, CHN
"traditional", CHN
"simplified", DK,
FIN, GR, J, KP /
ROK, NL, N, PL, P,
RUS, S, CZ / SK,
TR, H
Tahoma, Arial,
Courier New,
WinCC flexible
Standard,
ideographic
languages,
all freely scalable
Tahoma, Arial,
Courier New,
WinCC flexible
Standard,
ideographic
languages,
all freely scalable
Tahoma, Arial,
Courier New,
WinCC flexible
Standard,
ideographic
languages,
all freely scalable
Tahoma, Arial,
Courier New,
WinCC flexible
Standard,
ideographic
languages,
all freely scalable
Tahoma, Arial,
Courier New,
WinCC flexible
Standard,
ideographic
languages,
all freely scalable
USB, Ethernet,
automatic transfer
recognition
Yes
USB, Ethernet,
automatic transfer
recognition
Yes
USB, Ethernet,
automatic transfer
recognition
Yes
USB, Ethernet,
automatic transfer
recognition
Yes
USB, Ethernet,
automatic transfer
recognition
Yes
Recipes
• Recipes
• Data records per recipe
• Entries per data record
• Recipe memory
Number of process images
• Process images
• Variables
• Limit values
• Multiplexing
Image elements
• Text objects
• Graphics object
• dynamic objects
Lists
• Text lists
• Graphics list
• Libraries
Archiving
• Number of archives per project
• Number of measuring points per
project
• Number of entries per archive
• Memory location
Logging
• Recording/Printing
Languages
• Languages
Character sets
• Character sets
Transfer (upload/download)
• Transfer of configuration
• Wireless LAN
Siemens IK PI · 2012
8/179
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Wireless Devices
SIMATIC Mobile Panel 277(F) IWLAN
■ Technical specifications (continued)
Process coupling
• Connection to controller
• Zones
- Number of zones per project,
max.
- Number of transponders for
zones per project, max.
• Effective range
- Number of effective ranges per
project, max.
- Number of transponders for
effective ranges per project,
max.
• Transponder
- Number of transponders per
project, max.
- Adjustable distance range
- Adjustable distance, min.
- Adjustable distance, max.
6AV6 645-0FD010AX1
6AV6 645-0FE010AX1
6AV6 645-0GB010AX1
6AV6 645-0GC010AX1
6AV6 645-0GF010AX1
S7-200, S7- 300/400
see section on
"System interfaces"
Yes
254
S7-200, S7- 300/400
see section on
"System interfaces"
Yes
254
S7-200, S7- 300/400
see section on
"System interfaces"
Yes
254
S7-200, S7- 300/400
see section on
"System interfaces"
Yes
254
S7-200, S7- 300/400
see section on
"System interfaces"
255
255
255
255
Yes
127
Yes
127
127
127
Yes
127
Yes
256
Yes
256
Yes
256
Yes
256
Yes
2m
8m
Yes
2m
8m
Yes
2m
8m
Yes
2m
8m
I/O
I/O devices
Barcode reader
Barcode reader
Barcode reader
Barcode reader
Barcode reader
Mechanics/material
Type of housing (front)
Plastic
Plastic
Plastic
Plastic
Plastic
Dia 290 mm /
D 103 mm
Dia 290 mm /
D 103 mm
Dia 290 mm /
D 103 mm
Dia 290 mm /
D 103 mm
Dia 290 mm /
D 103 mm
2.2 kg
2.2 kg
2.2 kg
2.2 kg
2.2 kg
Dimensions and weight
Dimensions
• Housing diameter/depth (mm)
Weight
• Weight
8
8/180
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Wireless Devices
SIMATIC Mobile Panel 277(F) IWLAN
■ Ordering data
SIMATIC Mobile Panel
277 IWLAN V2 (RoW version)
• Communication via WLAN
(PROFINET)
• Communication via WLAN
(PROFINET)
with integrated handwheel,
key-operated switch and two
illuminated pushbuttons
SIMATIC Mobile Panel
277F IWLAN V2 PROFIsafe
(RoW version)
• Communication via WLAN
(PROFINET)
with acknowledgement button
and emergency stop button
• Communication via WLAN
(PROFINET)
with acknowledgement button
and emergency stop button
with integrated handwheel,
key-operated switch, and two
illuminated pushbuttons
• RFID tag version: Communication via WLAN (PROFINET)
with acknowledgement button
and emergency stop button
with integrated handwheel,
key-operated switch, and two
illuminated pushbuttons
SIMATIC Mobile Panel
277 IWLAN V2 (USA version)
• Communication via WLAN
(PROFINET)
• Communication via WLAN
(PROFINET)
with integrated handwheel,
key-operated switch and two
illuminated pushbuttons
SIMATIC Mobile Panel
277F IWLAN V2 PROFIsafe
(USA version)
• with acknowledgement button
and emergency stop button
• with acknowledgement button
and emergency stop button
with integrated handwheel,
key-operated switch, and two
illuminated pushbuttons
• with acknowledgement button
and emergency stop button
with integrated handwheel,
key-operated switch, and two
illuminated pushbuttons
(tag version)
Order No.
Order No.
Accessories
6AV6 645-0DD01-0AX1
6AV6 645-0DE01-0AX1
6AV6 645-0EB01-0AX1
6AV6 645-0EC01-0AX1
6AV6 645-0EF01-0AX1
6AV6 645-0FD01-0AX1
6AV6 645-0FE01-0AX1
Note:
Please order the table-top power
supply or charging station as
well. Required for charging the
battery
• Table-top power supply incl.
power cable for EU, US, UK, JP
(only suitable for operation
under laboratory/office conditions)
• Charger V2 for safe storage
and charging of device
incl. lock for securing the device
in the charger.
Charging capabilities for up to
two additional batteries
• Additional battery with LED
indicator for indicating the
charge status
• Transponder V2 incl. batteries
(3x AA)
• Transponder V1 incl. batteries
(3x AA)
(mandatory for operation in
plants with Mobile Panels 277(F)
IWLAN V1)
• Service pack V2 for Mobile
Panel 277(F) IWLAN V2 contains
accessories pack for Mobile
Panel 277 (labeling strip cover),
battery compartment cover
(device), cover left/right
(charger), power supply
connector counterpart
(charger), replacement key
(charger)
6AV6 671-5CN00-0AX2
6AV6 671-5CE00-0AX1
6AV6 671-5CL00-0AX0
6AV6 671-5CM00-0AX1
6AV6 671-5CM00-0AX0
6AV6 671-5CA00-0AX2
6AV6 645-0GB01-0AX1
8
6AV6 645-0GC01-0AX1
6AV6 645-0GF01-0AX1
Starter kit
SIMATIC Mobile Panel 277(F)
IWLAN (RoW version)
for
• Mobile Panel 277 IWLAN V2
• Mobile Panel 277F IWLAN V2
6AV6 651-5GA01-0AA1
6AV6 651-5HA01-0AA1
Siemens IK PI · 2012
8/181
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Wireless Devices
SIMATIC Mobile Panel 277(F) IWLAN
■ Ordering data
Order No.
SCALANCE W-786 Access Points for
SIMATIC Mobile Panel 277(F) IWLAN
• IWLAN Access Points with
integrated radio interfaces;
radio networks;
IEEE 802.11b/g/a/h at 2.4/5 GHz
up to 54 Mbit/s.
National approvals; WPA2/AES;
Power over Ethernet (PoE),
degree of protection IP65
(-40 °C to +70 °C);
scope of delivery:
Mounting hardware, 48 V DC
terminal block;
manual on CD-ROM;
German/English;
SCALANCE W-786-2RR
IWLAN Dual Access Point with
two integrated radio interface for
setting up radio links with iPCF;
RJ45 connection
Four internal antennas
• National approvals for operation
outside the U.S.
• National approvals for operation
within the U.S. 1)
6GK5 786-2BA60-6AA0
6GK5 786-2BA60-6AB0
SCALANCE W-786-1PRO
IWLAN Access Points with built-in
wireless interface RJ45
connection
Two internal antennas
• National approvals for operation
outside the U.S.
• National approvals for operation
within the U.S. 1)
6GK5 786-1BA60-2AA0
6GK5 786-1BA60-2AB0
Further IWLAN Access Point
versions:
8
SCALANCE W-784 Access
Points
6GK5 784-1AA30-...
SCALANCE W-786 Access
Points
6GK5 786-...
SCALANCE W-788 Access
Points
6GK5 788-...
PS791-2DC power supply
• 24 V DC power supply for installation in SCALANCE W-786
products; operating instructions
in German/English
6GK5 791-2DC00-0AA0
PS791-2AC power supply
• 110 V AC to 230 V AC power
supply for installation in
SCALANCE W-786 products;
operating instructions in
German/English
6GK5 791-2AC00-0AA0
Other compatible accessories
See catalog ST 80 / ST PC
1)
Siemens IK PI · 2012
with SIMATIC WinCC flexible
See catalog ST 80 / ST PC
Documentation
(to be ordered separately)
Mobile Panel
277F IWLAN V2
Operating Instructions
• German
• English
• French
• Italian
• Spanish
6AV6 691-1DQ01-2AA1
6AV6 691-1DQ01-2AB1
6AV6 691-1DQ01-2AC1
6AV6 691-1DQ01-2AD1
6AV6 691-1DQ01-2AE1
Mobile Panel 277 IWLAN V2
Operating Instructions
• German
• English
• French
• Italian
• Spanish
6AV6 691-1DM01-2AA1
6AV6 691-1DM01-2AB1
6AV6 691-1DM01-2AC1
6AV6 691-1DM01-2AD1
6AV6 691-1DM01-2AE1
User Manual WinCC flexible
Compact/Standard/Advanced
• German
• English
• French
• Italian
• Spanish
6AV6 691-1AB01-3AA0
6AV6 691-1AB01-3AB0
6AV6 691-1AB01-3AC0
6AV6 691-1AB01-3AD0
6AV6 691-1AB01-3AE0
WinCC flexible Communication
User Manual
• German
• English
• French
• Italian
• Spanish
6AV6 691-1CA01-3AA0
6AV6 691-1CA01-3AB0
6AV6 691-1CA01-3AC0
6AV6 691-1CA01-3AD0
6AV6 691-1CA01-3AE0
Accessories for Mobile Panels
See HMI accessories
The Function Manuals "Fail-Safe Operation of the Mobile Panel
277F IWLAN V1" are available for downloading in English,
German, and Japanese.
http://support.automation.siemens.com/WW/view/en/31255853
■ More information
Please note national approvals at
www.siemens.com/wireless-approvals
8/182
Order No.
Configuration
Additional information is available in the Internet at:
www.siemens.com/simatic-mobile-panels
Note:
Do you need a specific modification or addition to the products
described here? Then take a look under "Customer-specific
products". There, you will find information on ordering additional
and standard industry products as well as possibilities for
customer-specific modifications and adjustments.
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Wireless Devices
IM 154-6 PN IWLAN
■ Overview
Interface module for handling communication between
ET 200pro and host PROFINET IO controllers over Industrial
Wireless LAN (IWLAN) radio networks for 2.4 GHz or 5 GHz with
data transfer rates up to 54 Mbit/s.
• Protection against illegal access, espionage, tapping and
falsification through use of effective encryption mechanisms
• Fast exchange of devices through use of interchangeable
medium MICRO MEMORY CARD
■ Ordering data
Order No.
IM 154-6 PN HF IWLAN
interface module
7/8" connecting cable to
power supply
For communication between
ET 200pro and host controllers
over Industrial Wireless LAN
(IWLAN) radio networks;
support of PROFIsafe
5-core, 5 x 1.5 mm2,
trailing type, pre-assembled
with two 7/8" connectors
1.5 m long
6XV1 822-5BH15
2.0 m long
6XV1 822-5BH20
3.0 m long
6XV1 822-5BH30
5.0 m long
6XV1 822-5BH50
10 m long
6XV1 822-5BN10
6ES7 194-4MA00-0AA0
15 m long
• Other special lengths
with 90° or 180° cable outlet
6XV1 822-5BN15
See http://
support.automation.siemens.com
/WW/view/en/26999294
6GK5 792-6MN00-0AA6
Power line
6XV1 830-8AH10
With various national approvals;
refer to the current list of
approvals
6ES7 154-6AB00-0AB0
With approval for USA
6ES7 154-6AB50-0AB0
Antennas with omnidirectional
characteristic
Mounting directly on
IM154-6 PN HF IWLAN
• ANT IM 154-6 IWLAN; 2 units
For wall or pipe mounting
• ANT 792-6MN; rod antenna
N-Connect female 2.4 GHz;
1 unit
• ANT793-6MN; rod antenna
N-Connect female 5 GHz;
1 unit
For use with the RCoax antenna
system
• ANT 792-4DN; RCoax
N-Connect female 2.4 GHz;
1 unit
• ANT793-4MN; RCoax NConnect female 5 GHz; 1 unit
Order No.
Accessories
2,
6GK5 793-6MN00-0AA6
5-core, 5 x 1.5 mm trailing type,
sold by the meter,
minimum order quantity 20 m,
maximum order quantity 1,000 m
7/8" cable connector
6GK5 792-4DN00-0AA6
For ET 200eco, with axial cable
outlet; with socket insert,
pack of 5
6GK5 793-4MN00-0AA6
Twisted Pair cables
4x2 with RJ45 connectors
Antenna cables
IWLAN RCoax;
N-Connect / R-SMA
8
6GK1 905-0FB00
0.5 m long
6XV1 870-3QE50
1 m long
6XV1 870-3QH10
2 m long
6XV1 870-3QH20
1 m long
6XV1 875-5CH10
6 m long
6XV1 870-3QH60
2 m long
6XV1 875-5CH20
10 m long
6XV1 870-3QN10
5 m long
6XV1 875-5CH50
10 m long
6XV1 875-5CN10
Crossed Twisted Pair cables
4x2 with RJ45 connectors
IWLAN terminating resistor
50 Ohm for second R-SMA
antenna socket, 3 units
6GK5 795-1TR10-0AA6
0.5 m long
6XV1 870-3RE50
1 m long
6XV1 870-3RH10
2 m long
6XV1 870-3RH20
6 m long
6XV1 870-3RH60
10 m long
6XV1 870-3RN10
Siemens IK PI · 2012
8/183
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Wireless Devices
IM 154-6 PN IWLAN
■ Ordering data
Order No.
Order No.
General accessories
Spare fuse
ET 200pro rack
• Narrow, for interface,
electronics and power modules
- 500 mm
- 1000 mm
- 2000 mm, can be cut to length
• Compact, for interface,
electronics and power modules
- 500 mm
- 1000 mm
- 2000 mm, can be cut to length
• Wide, for interface,
electronics, power modules
and motor starters
- 500 mm
- 1000 mm
- 2000 mm, can be cut to length
• Wide, for I/O modules
and motor starters
- 500 mm
- 1000 mm
- 2000 mm
12.5 A quick-response,
for interface and power modules,
10 items per package unit
6ES7 194-4GA00-0AA0
6ES7 194-4GA60-0AA0
6ES7 194-4GA20-0AA0
6ES7 194-4GC70-0AA0
6ES7 194-4GC60-0AA0
6ES7 194-4GC20-0AA0
6ES7 194-4GB00-0AA0
6ES7 194-4GB60-0AA0
6ES7 194-4GB20-0AA0
6ES7 194-4GD00-0AA0
6ES7 194-4GD10-0AA0
6ES7 194-4GD20-0AA0
Labels
6ES7 194-4HB00-0AA0
3RT1 900-1SB20
20 x 7 mm, pale turquoise,
340 units per pack
SIMATIC Micro Memory Card
• 64 KB
• 128 KB
• 512 KB
6ES7 953-8LF20-0AA0
6ES7 953-8LG20-0AA0
6ES7 953-8LJ30-0AA0
SIMATIC Manual Collection
6ES7 998-8XC01-8YE0
Electronic manuals on DVD,
multi-language:
S7-200, TD 200, S7-300, M7-300,
C7, S7-400, M7-400, STEP 7,
Engineering Tools,
Runtime Software,
SIMATIC DP (Distributed I/O),
SIMATIC HMI (Human Machine
Interface), SIMATIC NET
(Industrial Communication)
SIMATIC Manual Collection –
Update service for 1 year
6ES7 998-8XC01-8YE2
Scope of delivery: Current DVD
"S7 Manual Collection" and the
three subsequent updates
Note:
You can find more information in Catalog ST 70 and
in the Industry Mall at www.siemens.com/industrymall
■ More information
Wireless approvals
Current approvals can be found on the Internet.
In Germany:
Further information can be found on the Internet at:
8
www.siemens.com/wireless-approvals
Outside Germany:
Further information can be found on the Internet at:
www.siemens.com/wireless-approvals
8/184
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Network transition
IWLAN/PB Link PN IO
■ Overview
■ Benefits
• High mobility;
increased plant availability through wireless data transmission
to mobile communication partners, e.g. to control an
automated guided vehicle system (AGVS)
• Wear-free;
contact-free technology with RCoax as a substitute for contact
wires, e.g. for suspended monorails
• Investment protection;
integration of PROFIBUS field devices into an IWLAN radio
network
• Also enables use in plants with PROFIsafe applications
• Flexible use ensured by connecting the antenna best suited to
the respective application (e.g. for operation on RCoax
radiating cable)
'30
'36
$6L0
■ Application
*B,.B;;B
31
• Compact router between Industrial Wireless LAN (IWLAN)
and PROFIBUS
• Wireless connection to IWLAN (e.g. SCALANCE W Access
Points) according to IEEE 802.11a/b/g/h with up to 54 Mbit/s
at 2.4 GHz and 5 GHz
• PROFINET IO proxy;
connection of PROFIBUS DP slaves to PROFINET IO controller
according to PROFINET standard:
- From the viewpoint of the IO controller, all DP slaves are
handled like I/O devices with Ethernet interface, i.e. the
IWLAN/PB Link PN IO is their proxy.
- From the viewpoint of the DP slaves, the IWLAN/PB Link
PN IO is the DP master
• High, deterministic data throughput and very fast roaming
through support of iPCF; the iPCF mechanism represents an
extension of the IEEE 802.11 standard and must be available
both on the station and on the access point,
e.g. SCALANCE W788-1RR
• Full support of the security options defined in the IEEE 802.11i
standard for authentication via WPA2 with TLS, TTLS, PEAP
• High degree of protection against unauthorized access
thanks to 128-bit encoding (AES)
• Direct substitution of solutions with Power Rail Booster for
PROFIBUS with non-contact data transmission technology;
Advantages: no wear of sliding contacts
• Cross-network PG/OP communication by means of S7 routing,
i.e. all S7 stations can be remotely programmed using the
programming device on the Industrial Ethernet or PROFIBUS.
• Cross-network access to data of S7 stations for visualization
by means of S7 OPC server and S7 routing;
via the IE/PB Link PN IO access can be made from the PC on
the Industrial Ethernet (e.g. for HMI applications with OPC
client interface) to all data of the S7 stations on the PROFIBUS
by means of the S7 OPC server.
• Module replacement without the need for a programming
device, using the C-PLUG swap media for backing up the
configuration data
• Configuring in STEP 7
The IWLAN/PB Link PN IO supports the use of an IWLAN, for
example with RCoax radiating cables, for wireless data transmission in the case of suspended monorails, storage and
retrieval systems, or other applications with mobile stations.
Support of PROFINET means that the wide variety of PROFIBUS
system services, such as diagnostics over the bus, can still be
utilized.
• Suspended monorails;
vehicle controllers for suspended monorails can be implemented economically on the basis of SIMATIC components.
High availability, short response times and easy expansion are
achieved by using distributed controllers, such as SIMATIC
ET 200S IM 151/CPU. With the aid of the IWLAN/PB Link
PN IO, the vehicle controllers can continue to be used without
change. The user can also program them remotely with
STEP 7 over IWLAN.
• Storage and retrieval systems;
with these systems, data light barriers requiring intensive
maintenance and offering no flexibility can be replaced by an
IWLAN solution. This enhances plant availability.
Siemens IK PI · 2012
8/185
8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Network transition
IWLAN/PB Link PN IO
Diagnosis
■ Design
The IWLAN/PB Link PN IO is snapped onto a standard mounting
rail. The external dimensions are the same as those of the Power
Rail Booster enclosure. The IP20 degree of protection ensures
that the IWLAN/PB Link PN IO is suitable for installation in the
control cabinet.
• Compact construction;
the rugged plastic enclosure features the following on the front
panel:
- an R-SMA interface for connecting an antenna, e.g. for
operation on the RCoax radiating cable
- a 9-pin sub-D socket for connection to PROFIBUS
- a 4-pin terminal strip for connecting the external supply
voltage of 24 V DC.
- Diagnostic LEDs
• Can be operated without a fan
• Fast device replacement in the event of a fault by using the
optional C-PLUG swap medium (not included in scope of
supply)
■ Function
PROFINET
• PROFINET IO proxy;
wireless connection of PROFIBUS DP slaves to PROFINET IO
Controller according to PROFINET standard. Using the
IWLAN/PB Link PN IO as a proxy, you can continue to use
existing PROFIBUS devices (also with PROFIsafe functionality,
V2.0 or higher) and integrate them into a PROFINET application.
8
Vertical integration
• S7 routing;
permits cross-network PG communication, in other words,
all S7 stations on the IWLAN/Industrial Ethernet or PROFIBUS
can be programmed remotely using the programming device.
Access can be made to visualization data of S7 stations on the
PROFIBUS from HMI stations on the IWLAN/Industrial
Ethernet.
• Data set routing (PROFIBUS DP);
using this option, the IWLAN/PB Link PN IO can be used as a
router for data sets that are forwarded to field devices
(DP slaves). SIMATIC PDM (Process Device Manager) is a tool
that creates data sets of this type for parameterizing and
diagnosing field devices.
It is possible, for example, to use SIMATIC PDM (on the PC) to
set parameters and perform diagnostics for a PROFIBUS PA
field device on the IWLAN/Industrial Ethernet over the
IWLAN/PB Link PN IO and DP/PA Coupler/Link.
The additional functions for vertical integration can also be
used in an existing PROFIBUS application without PROFINET
for connection to a higher-level IWLAN/Industrial Ethernet. In
this case, the IWLAN/PB Link PN IO is used as an additional
DP-Master Class 2 on a PROFIBUS segment for linking to the
IWLAN/Industrial Ethernet and offers the above functions.
8/186
Siemens IK PI · 2012
Extensive diagnostic options are available via STEP 7 or SNMP,
including:
• Diagnosis of the assigned PROFIBUS field devices;
using the IWLAN/PB Link PN IO as a proxy, the connected DP
slaves can be diagnosed in the same manner as PROFINET
IO devices (even in the user program of the PROFINET IO
controller)
• General diagnostics and statistics functions
• Connection diagnostics
• Diagnostic buffer
• Integration into network management systems through the
support of SNMP V1 MIB-II
Configuration
STEP 7 V5.4 or higher or the TIA Portal is required for configuring
the full functional scope of the IWLAN/PB Link PN IO.
For the IWLAN/PB Link PN IO, STEP 7 automatically generates
the necessary parameters, e.g. the ones that assign addresses,
and all necessary routing information.
The configuration data for PROFINET IO created with STEP 7
is saved on the IO controller. Attention must however be paid to
the memory capacity. The initialization data for the Ethernet
interface is backed up on the C-PLUG (Configuration Plug) swap
media. The IWLAN/PB Link PN IO can be swapped in the event
of failure without a programming device, because the relevant
user and configuration data is saved on the IO controller or on
the C-PLUG.
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Network transition
IWLAN/PB Link PN IO
■ Integration
Numeric Control
as IO device
SIMATIC S7-400
as IO Controller
PROFINET
Access Point
SCALANCE
W-780
RCoax Cable Segment 1
IWLAN/
PB Link PN IO
Antenna
ET 200S
PROFIBUS
Access Point
SCALANCE
W-780
RCoax Cable Segment 2
IWLAN/
PB Link PN IO
Antenna
ET 200S
PROFIBUS
Access Point
SCALANCE
W-780
RCoax Cable Segment 3
IWLAN/
PB Link PN IO
Antenna
ET 200S
PROFIBUS
G_IK10_XX_30033
Industrial Ethernet
System solution with IWLAN/PB Link PN IO using example of suspended monorail
8
Siemens IK PI · 2012
8/187
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Network transition
IWLAN/PB Link PN IO
■ Technical specifications
Product type designation
Transfer rates
• Radio
- standards supported
• PROFIBUS
Interfaces
• Connection to Industrial Wireless
LAN
• Connection to PROFIBUS
- maximum segment length
for PROFIBUS 1)
- maximum current consumption
at the PROFIBUS interface with
connection of network components (for example, optical
network components)
• Connection for power supply
IWLAN/PB Link PN IO
1 … 54 Mbit/s
IEEE 802.11a, 802.11b, 802.11g,
802.11h, 802.11i
9.6 kbit/s to 12 Mbit/s incl.
45.45 kbit/s (PROFIBUS PA)
PROFINET communication
• Number of DP slaves on the
IWLAN/PB Link PN IO (PROFINET
IO-Devices for PROFINET IO)
• Number of DP inputs
• Number of DP outputs
R-SMA antenna socket
Additional functionality
• Number of S7 connections
• Number of DSGW connections
9-pin Sub-D socket
20 m
100 mA at 5 V
4-pin terminal block
Power supply 2)
2 supplies for 20.4 … 28.8 V DC
Current consumption
(at rated voltage)
• external from 24 V DC, max.
300 mA
Power loss
approx. 6.5 W
Perm. ambient conditions
• Operating temperature
• Transport/storage temperature
• Relative humidity, max.
0 … + 60 °C
- 40 … + 70 °C
95 % at +25 °C
Design
• Module format
• Dimensions (W x H x D) in mm
• Weight
Power Rail Booster enclosure
90 x 132 x 75
approx. 300 g
Degree of protection
IP20
Configuration
Configuration software
8
1)
2)
STEP 7/NCM S7
with V5.3 SP2 or later plus
Hardware Support Package
for IWLAN/PB Link PN IO
A repeater is required if the specified length is exceeded
The power supply is electrically isolated; a high-impedance
connection (>700 kΩ) exists to the contact spring for mounting of the
enclosure on the DIN rail).
8/188
Siemens IK PI · 2012
Product type designation
IWLAN/PB Link PN IO
Performance data
max. 8
max. 256 byte
max. 256 byte
max. 8
max. 8
© Siemens AG 2011
Industrial Wireless Communication
IWLAN — Network transition
IWLAN/PB Link PN IO
■ Ordering data
Order No.
Order No.
IWLAN/PB Link PN IO
Accessoires
Network transition between
Industrial Wireless LAN and
PROFIBUS with PROFINET IO
functionality, TCP/IP, S7 routing,
IEEE 802.11a/b/g/h at 2.4/5 GHz
up to 54 Mbit/s, 9.6 Kbit/s to
12 Mbit/s PROFIBUS;
including electronic manual on
CD-ROM;
German, English, French,
Spanish, Italian
• National approvals for operation
outside the USA
• National approvals for operation
within the USA1)
C-PLUG
6GK1 900-0AB00
Swap medium for simple
replacement of devices in the
event of a fault;
for storing configuration or
engineering and application data;
can be used for SIMATIC NET
products with C-PLUG slot
PRESET-PLUG
6GK1 417-5AB00
6GK1 417-5AB01
6GK5 798-8AB00
Swap medium for simple initial
startup of IWLAN clients,
e.g. IWLAN/PB Link PN IO
PROFIBUS FC Standard Cable
GP
6XV1 830-0EH10
Standard type with special design
for fast mounting, 2-core,
shielded,
PROFIBUS FastConnect
bus connector RS485 Plug 180
6GK1 500-0FC10
with insulation displacement
terminals, with 180° cable outlet,
for industrial PC,
SIMATIC HMI OP, OLM;
max. transmission rate 12 Mbit/s
PROFIBUS FastConnect
Stripping Tool
6GK1 905-6AA00
Preadjusted stripping tool for fast
stripping of PROFIBUS
FastConnect bus cables
S7-300 PS 307
load power supply
6ES7 307-1BA00-0AA0
24 V DC
Antennas and miscellaneous
IWLAN accessories
1)
See Industrial Wireless LAN/
accessories
8
Please note national approvals at
www.siemens.com/wireless-approvals
Siemens IK PI · 2012
8/189
© Siemens AG 2011
Industrial Wireless Communication
Engineering/network management/diagnostics
SINEMA E
■ Overview
■ Benefits
• Engineering tool for support with planning, configuration,
simulation and measurement of an IWLAN radio field on site
(Site Survey) according to the IEEE 802.11 a/b/g/h standard
• Automatic determination of the WLAN infrastructure for new
and existing networks
• Optimization functions for minimization of channel interference
• Visualization and analysis of WLAN networks according to
signal strength, data rate, signal-to-noise ratio, overlapping
and applications (PROFINET, TCP/IP, Voice over WLAN)
• Configuration of single and multiple devices as well as
uploading/downloading of IWLAN device parameters
• Site survey functions (measurements) for the acquisition,
conditioning, evaluation and visualization of measured WLAN
signals
• Integrated and expandable catalog entries for WLAN devices,
antennas and radio hindrances as well as standard graphics
formats for importing layout plans
• Report function for documenting the configured and
measured WLAN infrastructure
8
8/190
Siemens IK PI · 2012
• Quick and easy creation of WLAN applications for industrial
and office environments indoors and outdoors thanks to
functions for
- automatic detection of the optimal WLAN infrastructure
- minimization of channel interference
- simulation of changes to device properties, to predict the
operating principle of real networks
- wizard-supported project and tender preparation
• Minimization of the configuration and start-up outlay thanks to
grouped offline and online functions
• Reduction of configuration errors through inherent consistency check
• Analysis of the the performance of existing WLAN networks
through measurement and evaluation functions
- at the beginning or for verification of start-up
- for troubleshooting and optimization during maintenance
and servicing
• Report function including the planning and measurement
results for offer generation, device installation instructions and
plant documentation
• Extendable catalogs for integration of further
- WLAN devices (to the IEEE 802.11 a/b/g/h standard)
- obstacles to radio waves, through the measurement and/or
input of attenuation values
© Siemens AG 2011
Industrial Wireless Communication
Engineering/network management/diagnostics
SINEMA E
■ Application
SINEMA E (SIMATIC Network Manager Engineering) is the
generic term for the engineering of network products such as
SCALANCE W.
3ODQQLQJ
&XVWRPHU
,QVWDOODWLRQV
SHUVRQDO
3ODQQHU
3URMHFWHQJLQHHU
&RPPLVVLRQLQJ
&RPPLVVLRQLQJHQJLQHHUV
2IIOLQH
0DLQWHQDQFH6HUYLFH
6HUYLFH
G_IK10_XX_10209
7HFKQLFDOFODULILFDWLRQ
2QOLQH
Application diagram of the SINEMA E software for planning and measuring WLAN networks
SINEMA E 2006 contains the following functions for the
engineering of IWLAN networks:
Technical clarification
• Wizard-supported tender preparation
Planning
• Measurement (site survey) of an existing WLAN network
• Planning, simulation, and optimization of a WLAN infrastructure
- Simultaneous configuring of device groups
- Generation of a report with installation guidelines
Maintenance and service
• Optimization and fault rectification with the help of measurements (site survey)
The functional scope of the software is subdivided into "lean"
and "standard" licenses. With the standard license, additional
functions are possible for the acquisition, evaluation and
visualization of measured WLAN signals (site survey) as well
as extended simulation and planning (automatic placement,
contour presentation, storage/comparison of simulations,
extended filter options).
Start-up
• Identification, upload/download from devices
• Measurement (site survey) for verification and optimization
of planning
• Report for final documentation
Siemens IK PI · 2012
8/191
8
© Siemens AG 2011
Industrial Wireless Communication
Engineering/network management/diagnostics
SINEMA E
■ Function
The SINEMA E software (SIMATIC NEtwork MAnager
Engineering) provides the user with various different tools for
planning, configuration, simulation and measurement (site
survey) of WLAN networks.
Modeling, simulation, visualization, and optimization
Special algorithms in SINEMA E allow the operating principle of
WLAN networks to be predicted taking into account environmental sources of interference. Catalogs provided in the
software that contain known sources of interference (e.g. walls,
machines, and tools) make it easy to model even the most
difficult environments at the office desk quickly and accurately.
If required, obstacles specific to the environment can be
accurately determined with local measurements and added to
the catalog.
Using the software, the properties of Access Points and Client
Modules, such as channel settings/transmitted power, and their
antennas can be changed to ensure that the optimal configuration is achieved for the real network.
Following simulation, all signal parameters such as range, data
rate, attenuation, etc. can be evaluated using several different
views. At any time, therefore, the quality of the WLAN can be
predicted inside and outside buildings and gaps in security can
be closed.
SINEMA E is a complete tool for measurement (site survey) of
existing WLAN networks according to the IEEE 802.11 a/b/g/h
standard. WLAN signals can be measured using this at the start
of planning or for verification during commissioning as well as for
troubleshooting during maintenance and servicing.
The software saves received measured values of the WLAN
adapter used with the coordinates in the floor plan and links
them together. Different methods are available for measurement
and evaluation to suit the application.
Standard measuring technique
The WLAN adapter used for measurement is always connected
to a previously defined WLAN network (SSID). Properties such
as speed, signal strength and roaming behavior of the existing
client access point connection are determined.
For continuous measurements along a route, it is sufficient to set
a start and end point to enable all additional measuring coordinates to be automatically determined by the software. The
WLAN connection properties of a client can then be measured
quickly even in the case of large areas.
Advanced measuring technique
The "standard" license also offers integrated expert functions
such as automatic placement and channel optimization, which
determine the necessary access points and optimize the device
parameters. The "standard" license also supports visualization
with contours, further filter options, the comparison of saved
simulations and the creation of application profiles for
PROFINET, TCP/IP, and Voice over WLAN.
All WLAN signals in the environment are scanned so that signals
from known and unknown devices can be acquired.
Multi-device setting of access points and clients
For creating an offer for IWLAN applications of an industrial plant
(Level 1)
The parameters of all SCALANCE W access points and clients
are part of the SINEMA E project and can be set accordingly.
Common parameters of these devices can be combined in a
group and therefore set more rapidly.
8
WLAN site survey (measurement), evaluation and
visualization
Configuring with SINEMA E can also be carried out without the
hardware being present. SINEMA E checks the consistency of
the configuration, thus preventing faulty settings.
Initial startup and configuration
Simply by pressing a key, SINEMA E identifies all IWLAN nodes
which can be accessed online, and transmits all basic parameters of these devices, such as IP addresses etc., during initial
commissioning.
Further devices which are not yet included in the project are also
detected, and their configuration data can be added to the
project.
The initial startup can be carried out from any point in the same
subnetwork. Further settings and configurations can then also
be transmitted from other subnetworks in the Ethernet network to
all devices in the project by pressing a key.
8/192
Siemens IK PI · 2012
Using the filter functions of SINEMA, such as minimum,
maximum, average value, measurements from a wide range of
different points in time can be combined and analyzed.
Sales wizard
SINEMA E report function
The report function supplies an up-to-date project overview at
every phase of the engineering process.
A report always comprises a project device list with order
numbers and antennas as well as installation coordinates inside
and outside the modeling environment. The format and scope of
the HTML report can be changed using the software. All the
planning and measurement graphics can be inserted as well as
later plant photos, logos, etc. without the need for any special
software.
The report permits quotations to be generated at an early point
in time, and devices can be installed for commissioning using
the coordinates data. The report is an important document
following commissioning and during service and maintenance.
© Siemens AG 2011
Industrial Wireless Communication
Engineering/network management/diagnostics
SINEMA E
■ Ordering data
Order No.
Engineering software for
planning, configuring,
simulating and measuring
(Site Survey) industrial WLAN
applications in office and
industrial environments on
PG/PC in accordance with the
802.11 a/b/g/h standard;
software and electronic manual
on CD-ROM, license key on
diskette, Class A, for 32-bit
Windows XP Professional +SP2;
German/English
• SINEMA E 2006 Lean
Planning, configuring and
simulating WLAN applications
• SINEMA E 2006 standard
Extended planning, configuring,
simulating and measuring (site
survey) of WLAN applications
(automatic placement, application profile, contour presentation, storage/comparison of
simulations, extended filter
options)
• SINEMA E 2006 Powerpack
Software upgrade from
SINEMA E Lean to
SINEMA E Standard
■ More information
You can find further information on the Internet at:
www.siemens.com/sinema
SINEMA E
6GK1 781-0AA00-6AA0
6GK1 782-0AA00-6AA0
6GK1 782-4AA00-6AC0
8
Siemens IK PI · 2012
8/193
© Siemens AG 2011
Industrial Wireless Communication
WirelessHART
Introduction
■ Overview
SITRANS
MDS
HART (Highway Addressable Remote Transducer) is the
protocol for bus-addressed field devices. It is not a fieldbus,
but a version of the digital field communication that contains
many of the functionalities of fieldbuses.
OS
WirelessHART is the wireless HART communication to fieldbuses in the process industry. The HART Communication Foundation (HCF) specified WirelessHART and published it as part of
the HART standard V7.1. The radio transmission is based on the
wireless communications standard IEEE 802.15.4. High availability is achieved by means of the meshed network architecture
(each field device is simultaneously a repeater) with redundant
communication paths and constantly changing frequency
channels (channel hopping). 128-bit encryption in conjunction
with authentication and validation of each data packet ensures
secure data transfer and prevents unauthorized access to the
field devices.
Industrial Ethernet
Controller without
HART support
SITRANS
AW200
4 –20 mA
IWLAN
IEEE802.11
As a basic principle, a WirelessHART network consists of
WirelessHART field devices and a WirelessHART gateway that
receives the data from the field devices and forwards it to the
automation system.
4 –20 mA
Wireless
HART
Industrial
Ethernet
4 –20 mA
IE/WSNPA LINK
8
8/194
Siemens IK PI · 2012
PROFIBUS
Remote I/O station
w/o HART support
© Siemens AG 2011
Industrial Wireless Communication
WirelessHART
SITRANS P280
■ Overview
SITRANS P280 for flexible and cost-effective applications in
pressure monitoring
• Supports the WirelessHART standard (HART V 7.1)
• Very high security level for wireless data transmission
• Built-in local user interface (LUI) with 3-button operation
• Optimum representation and readability using graphical
display (104 x 80 pixels) with integrated backlight
• Stand-by (deep sleep phase) can be activated and deactivated device with push of a button
• Battery power supply
• Battery life time up to 5 years
• Extend battery life time with switch off the HART modem
interface
• Optimized power consumption through new design, and
increase in battery life time
• Simple configuration thanks to SIMATIC PDM
• Device meets IP65 degree of protection
• Can be used for absolute and gauge pressure measurements
Note:
You can find more information in Catalog FI 01 and in the
Industry Mall at www.siemens.com/industrymall
8
Siemens IK PI · 2012
8/195
© Siemens AG 2011
Industrial Wireless Communication
WirelessHART
SITRANS P280
■ Ordering data
Order No.
Order No.
Configuration
SITRANS P280 WirelessHART
pressure transmitter
(Required battery not included
with delivery, see accessories)
Further designs
7MP1120 - 7 7 7 7 7 - 7 7 7 0
Order code
Stainless steel TAG plate
Measuring cell filling
Dry measuring cell
Please add "-Z" to Order No. and
specify Order code(s) and plain
text.
0
Measuring span
Gauge pressure
• 0 ... 2 bar g (0 ... 29 psi g)
D
• 0 ... 10 bar g (0 ... 145 psi g)
• Measuring point number
(TAG Nr.) max. 16 digits entered
in plain text
Y15: ....................
Y15
Y16
E
• Measuring point message max.
27 characters entered in plain
text:
Y16: ....................
• 0 ... 50 bar g (0 ... 725 psi g)
F
Accessoires
• 0 ... 200 bar g (0 ... 2900 psi g)
G
H
Lithium battery for
SITRANS TF280/P280
7MP1990-0AA00
• 0 ... 400 bar g (0 ... 5800 psi g)
Mounting bracket, steel
7MF4997-1AC
Absolute pressure
• 0 ... 2 bar a (0 ... 29 psi a)
M
Mounting bracket, stainless steel
7MF4997-1AJ
• 0 ... 10 bar a (0 ... 145 psi a)
N
7MF4997-1BB
• 0 ... 50 bar a (0 ... 725 psi a)
P
Cover, die-cast aluminum,
without window
• 0 ... 200 bar a (0 ... 2900 psi a)
Q
Cover, die-cast aluminum,
with window
7MF4997-1BE
• 0 ... 400 bar a (0 ... 5800 psi a)
R
IE/WSN-PA LINK
see Chap. 8
HART modem with
RS232 interface
7MF4997-1DA
HART modem with
USB interface
7MF4997-1DB
SIMATIC PDM
see Chap. 9
Wetted parts
Ceramic
K
Display
Digital display, visible
1
Enclosure
Die-cast aluminum
1
Process connection
G½ as per EN 837-1
½-14 NPT
0
1
■ More information
Explosion protection
Without
8
A
The PIA Life Cycle Portal is designed to support you in selecting
the correct ordering numbers:
Antenna
Variable, attached to device
8/196
Siemens IK PI · 2012
A
www.pia-portal.automation.siemens.com
© Siemens AG 2011
Industrial Wireless Communication
WirelessHART
SITRANS TF280
■ Overview
■ Ordering data
Order No.
Configuration
SITRANS TF280 WirelessHART
Temperature transmitter
(Required battery not included
with delivery, see accessories)
7MP1110 - 0 A 7 7 7 - 0 7 7 0
Connections/cable entry
Cable gland M20x1.5
C
Sensor pipe with Pt100,
G½" male thread, pre-mounted
and connected
D
Display
Digital display, visible
1
Enclosure
Die-cast aluminum
1
Explosion protection
Not included
A
Antenna
Variable, attached to device
A
Further designs
SITRANS TF280 for flexible and cost-effective temperature
measurements
• Supports the WirelessHART standard (HART V 7.1)
• Very high security level for wireless data transmission
• Built-in local user interface (LUI) with 3-button operation
• Optimum display and readability using graphics display
(104 x 80 pixels) with integrated background lighting
• Stand-by (deep sleep phase) on device can be turned on and
off with a push of a button
• Battery power supply
• Battery service live up to 5 years
• Extend battery service life with HART modem interface which
can be shut off
• Optimized power consumption through new design, and
increase in battery service life
• Simple configuration thanks to SIMATIC PDM
• Housing meets IP65 degree of protection
• Supports all Pt100 sensors as per IEC 751/ EN 60751
Note:
You can find more information in Catalog FI 01 and in the
Industry Mall at www.siemens.com/industrymall
Please add "-Z" to Order No.
and specify Order code(s) and
plain text.
Order code
Stainless steel TAG plate
Measuring point number
(TAG Nr.) max. 16 digits entered
in plain text
Y15: ....................
Y15
Measuring point message
max. 27 characters entered in
plain text:
Y16: ....................
Y16
Accessories
Lithium battery for
SITRANS TF280/P280
7MP1990-0AA00
Mounting bracket, steel
7MF4997-1AC
Mounting bracket, stainless steel
7MF4997-1AJ
Cover, die-cast aluminum,
without window
7MF4997-1BB
Cover, die-cast aluminum,
with window
7MF4997-1BE
Thread adapter M20x1.5
(male thread) on ½-14 NP
(female thread)
7MP1990-0BA00
Thread adapter M20x1.5 (male
thread) on G½B (female thread)
7MP1990-0BB00
IE/WSN-PA LINK
see Chap.. 9
HART modem with RS232
interface
7MF4997-1DA
HART modem with USB interface
7MF4997-1DB
1)
8
Please order sensor separately.
■ More information
The PIA Life Cycle Portal is designed to support you in selecting
the correct ordering numbers:
www.pia-portal.automation.siemens.com
Siemens IK PI · 2012
8/197
© Siemens AG 2011
Industrial Wireless Communication
WirelessHART
SITRANS AW200
■ Overview
■ Ordering data
Order No.
Configuration
SITRANS AW200
adapter for WirelessHART
communication
7MP3112 - 7 7 7 7 0 - 0 A A 0
WirelessHART adapter AW200
with 4 ... 20 mA- or
HART interface
Without battery
1
Power supply
Battery powered
A
Certificates and approvals 1)
Ohne
A
Enclosure
Polyester
0
Accessories
SITRANS AW200 WirelessHART Adapter
Lithium battery for
SITRANS AW200
7MP3990-0AA00
The SITRANS AW200 WirelessHART adapter is a batterypowered communication component, which integrates HART
and 4 ... 20 mA field devices into a WirelessHART network.
On the wireless communication side, the adapter supports the
WirelessHART standard. HART and 4 ... 20 mA field devices are
connected on the field device side.
Thread adapter for direct
mounting of the adapter to a
field device
• M20 thread adapter
• Thread adapter G½
• Thread adapter ½" - 14 NPT
• Thread adapter ¾" - 14 NPT
7MF4997-1AC
Mounting bracket for attachment
to wall/pipe Material: Stainless
steel SS304, including cable
gland
7MP3990-0CA00
The SITRANS AW200 WirelessHART adapter
• supports the WirelessHART standard (HART V 7.1)
• features a very high degree of security for wireless data
transmission
• integrates one 4 ... 20 mA field device or up to four HART field
devices (in multidrop mode) into a WirelessHART network
• features intelligent energy management for the power supply
of connected field devices
• can be easily parameterized using SIMATIC PDM
8
Note:
You can find more information in Catalog FI 01 and in the
Industry Mall at www.siemens.com/industrymall
8/198
Siemens IK PI · 2012
1)
7MP3990-0BA00
7MP3990-0BB00
7MP3990-0BC00
7MP3990-0BD00
Additional approvals in process.
■ More information
The PIA Life Cycle Portal is designed to support you in selecting
the correct ordering numbers:
www.pia-portal.automation.siemens.com
© Siemens AG 2011
Industrial Wireless Communication
WirelessHART
IE/WSN-PA LINK
■ Overview
■ Application
The IE/WSN-PA LINK connects wireless HART field devices by
radio to the Ethernet. On the radio side, the IE/WSN-PA LINK
supports the WirelessHART standard and on the Ethernet side
the TCP/IP and Modbus TCP communication.
The IE/WSN-PA LINK thus enables wireless diagnostics, maintenance and process monitoring.
Monitoring
WirelessHART is particularly suitable for use in plant sections
that are to be included in monitoring, but which do not have any
existing MSR cabling, e.g. external tank stores or other installations where high cabling costs are anticipated. Data for the
visualization can be retrieved from the IE/WSN-PA LINK via
Industrial Ethernet or Modbus TCP.
ES
• The IE/WSN-PA LINK is a gateway for the connection
of WirelessHART field devices (HART V7.1) to Industrial
Ethernet, as an alternative or supplement to the wired
connection.
• Connection of up to 100 WirelessHART devices
• Approved for operation in hazardous areas in Zone 2
• Open TCP/IP communication and Modbus TCP via the
Ethernet interface
• Can be used with HART-OPC servers of the HART Communication Foundation
Note:
A general introduction to WirelessHART and information on the
WirelessHART adapter and the WirelessHART field devices can
be found in Catalog FI 01 or on the Internet at
www.siemens.com/wirelesshart
OS
MS
Industrial Ethernet
SIMATIC
system
SITRANS
AW200
SIMATIC ET 200
with HART support
Wireless
HART
IE/WSNPA LINK
■ Benefits
8
• Extended possible solutions for connecting process industry
field devices by means of alternative or supplementary
WirelessHART communication
• Reliable data transmission using intermeshed network
technology; the self-organizing network with alternative paths
enables radio obstacles to be bypassed
• Reduction of cabling costs under difficult installation
conditions, e.g. if the field devices are located on inaccessible
plant components or are only required temporarily
• To improve process monitoring and for maintenance tasks,
sensors can be retrofitted
• Existing transmitters can be integrated wirelessly into
maintenance and diagnostics systems by means of
WirelessHART adapters
• Without additional software, restricted monitoring is
possible via web services and the integrated web server of
the IE/WSN-PA LINK.
PROFIBUS
DP/PA
LINK
SITRANS SITRANS
P280
TF280
PROFIBUS PA
Monitoring of process states via WirelessHART
Siemens IK PI · 2012
8/199
© Siemens AG 2011
Industrial Wireless Communication
WirelessHART
IE/WSN-PA LINK
■ Application (continued)
■ Design
Retrofitting for diagnostics and maintenance
The IE/WSN-PA LINK collects the data of all wireless adapters
and transfers it via Industrial Ethernet to the diagnostics and
maintenance station.
• 2 x 10/100/1000 Mbit/s RJ45 ports, electrical (no integral
switch; interfaces can be used, for example, for continuous
connection to the plant network as well as the temporary
connection of a PC)
• 1 x screw terminal for connection to Modbus RTU via RS485
• 1 x screw terminal for the 24 V DC connection
• Rugged metal enclosure with IP65 protection for use
outdoors, also in hazardous zone 2
• Mounting: wall or mast mounting (vertical);
U-bolts for mast mounting are included in the scope of
delivery.
If greater distances between the IE/WSN-PA LINK and the
monitoring station are to be spanned without cabling, this can be
implemented by means of Industrial Wireless LAN with the
access points and client modules of the SCALANCE W family.
Product versions
• With integral, non-detachable antenna
• With N connector for connection of external antennas
For this application, wireless adapters are looped into the
4-20 mA interface or screwed directly onto the HART device.
The acyclic HART message frames are transmitted by radio
between IE/WSN-PA LINK and a wireless adapter. Without
affecting the operation of the plant, the wireless adapter
modulates the acyclic HART message frames to the 4-20 mA
interface or extracts them from the 4-20 mA interface.
■ Function
SITRANS
MDS
OS
WirelessHART
The IE/WSN-PA LINK establishes on the radio side an intermeshed wireless sensor network for communication with
wireless field devices (e.g. transmitters). The data from the
wireless field devices is received by the IE/WSN-PA LINK and
transmitted via Industrial Ethernet to the connected systems.
The supported wireless network is an open wireless network
specified by the HART Communication Foundation (HCF) in
accordance with the WirelessHART (HART V7.1) standard.
Industrial Ethernet
Controller without
HART support
SITRANS
AW200
On the field device side, the IE/WSN-PA LINK requires field
devices that support WirelessHART (HART). Existing field
devices can be integrated by means of wireless adapters into
the WirelessHART communication. To this end, the adapters are
looped into the 4-20 mA interface. In addition, as many as four
standard HART field devices with external power supply can be
connected to the adapter in multidrop mode. Individually
connected devices can be operated with the battery of the
adapter.
4 –20 mA
IWLAN
IEEE802.11
4 –20 mA
Wireless
HART
The adapter wirelessly transmits all data and process values
of the connected devices. The advantage of this solution is that
tried and tested devices can continue to be used.
Industrial
Ethernet
8
Remote I/O station
w/o HART support
IE/WSNPA LINK
Retrofitting of plants for diagnostics and maintenance
8/200
Siemens IK PI · 2012
PROFIBUS
4 –20 mA
Industrial Ethernet
Via the Ethernet interface the IE/WSN-PA LINK supports the use
of the HART OPC server and the Modbus TCP protocol.
Configuration
The configuration is web-based, without additional software, and
performed from the PC. By means of the web user interface it is
also possible to display the device states and measured values
of the WirelessHART devices.
© Siemens AG 2011
Industrial Wireless Communication
WirelessHART
IE/WSN-PA LINK
■ Integration
Integration into automation systems
Integration in PCS 7
The IE/WSN-PA LINK can be integrated into automation systems
via Ethernet or Modbus TCP. Communication modules
(CP 343-1 or CP 443-1) are required to connect the IE/WSN-PA
LINK to SIMATIC S7-300/400. Function blocks and technical
support can be found at:
For integration of the IE/WSN-PA LINK into PCS 7 you can obtain
function blocks and technical support at:
www.siemens.com/simatic-net/ik-info
www.siemens.com/simatic-net/ik-info
■ Technical specifications
Ordering data
6GK1 411-6CA40-0AA0
6GK1 411-6CA40-0BA0
Product type designation
IE/WSN-PA LINK
IE/WSN-PA LINK
Data transmission rate
• at interface 1
• at interface 2
• at interface 3
10 … 100 Mbit/s
10 … 100 Mbit/s
9.6 to 57.6 kbit/s
10 … 100 Mbit/s
10 … 100 Mbit/s
9.6 to 57.6 kbit/s
1
1
1
1
1
1
1
1
RJ45 port
RJ45 port
RJ45 port
RJ45 port
2-pin terminal strip
2-pin terminal strip
3-pin terminal strip
3-pin terminal strip
Number of radio cards
permanently installed
1
1
Number of internal antennas
1
0
Number of electrical connections
for external antenna(s)
0
1
Design of electrical connection for
external antenna(s)
-
N-Connector
Type of power supply
DC
DC
Supply voltage, external
• Minimum
• Maximum
24 V
20 V
28 V
24 V
20 V
28 V
Interfaces
Number of electrical connections
• at interface 1 in accordance
with Industrial Ethernet
• at interface 2 in accordance
with Industrial Ethernet
• at interface 3 in accordance
with RS 485
• For power supply
Design of electrical connection
• at interface 1 in accordance
with Industrial Ethernet
• at interface 2 in accordance
with Industrial Ethernet
• at interface 3 in accordance
with RS 485
• For power supply
Interfaces Wireless
8
Supply voltage,
current consumption, power loss
Current consumed from external
0.5 A
power supply at 24 V DC, maximum
0.5 A
Effective power loss, maximum
12 W
12 W
Siemens IK PI · 2012
8/201
© Siemens AG 2011
Industrial Wireless Communication
WirelessHART
IE/WSN-PA LINK
■ Technical specifications (continued)
Ordering data
6GK1 411-6CA40-0AA0
6GK1 411-6CA40-0BA0
Product type designation
IE/WSN-PA LINK
IE/WSN-PA LINK
-40 … +60 °C
-40 … +85 °C
-40 … +85 °C
-40 … +60 °C
-40 … +85 °C
-40 … +85 °C
Relative humidity at 25 °C without
condensation during operating
phase, maximum
90 %
90 %
IP degree of protection
IP 65
IP 65
Permitted ambient conditions
Ambient temperature
• During operating phase
• During storage
• During transport
Design, dimensions and weights
Housing width
229 mm
229 mm
Housing height
• Without antenna
• With antenna
306 mm
354 mm
306 mm
354 mm
Housing depth
89 mm
89 mm
Net weight
4.54 kg
4.54 kg
Type of mounting
• Wall mounting
• Mast mounting
Yes
Yes
Yes
Yes
Material for mast mounting
included in scope of delivery
Material for mast mounting
included in scope of delivery
2.4 GHz
2.5 GHz
2.4 GHz
2.5 GHz
100
100
10 s
10 s
5s
5s
100 m
The values may deviate if obstacles affecting radio
transmission are present
100 m
The values may deviate if obstacles affecting radio
transmission are present
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Type of mounting
Radio frequencies
Radio frequency with WirelessHART
in the 2.4 GHz frequency band
• Start value
• Full-scale value
Performance data WirelessHART
Number of WirelessHART devices
which can be operated
8
Network latency
• Maximum with 100 field devices
and WirelessHART network
• Maximum with 50 field devices
and WirelessHART network
Transition link between two devices
with WirelessHART network
• Maximum
• Note
HART protocol is supported
Product properties,
functions, components
General
Protocol is supported
• Address Resolution Protocol
(ARP)
• HTTP
• HTTPS
• Modbus TCP
• Modbus TCP secure
• Modbus RTU
8/202
Siemens IK PI · 2012
© Siemens AG 2011
Industrial Wireless Communication
WirelessHART
IE/WSN-PA LINK
■ Technical specifications (continued)
Ordering data
6GK1 411-6CA40-0AA0
6GK1 411-6CA40-0BA0
Product type designation
IE/WSN-PA LINK
IE/WSN-PA LINK
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Product function
• Password protection - multilevel
• WirelessHART join key
• ACL - MAC-based
• WirelessHART network ID
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
SSL protocol is supported
Yes
Yes
Encryption principle
AES 128 bit
AES 128 bit
Yes
Yes
Standard for WirelessHART
HART V 7.1
HART V 7.1
Standard for wireless communication IEEE 802.15.4
Yes
Yes
• Referred to NEMA
Yes
CSA Division 2 & Dust Ignition-proof for Class I,
Division 2, Groups A, B, C, and D. Dust Ignition-proof
for Class II, Groups E, F, and G / Suitable for Class III
Hazardous Locations. / Install per Siemens drawing
A5E02467236A. Temperature Code:
T4 (-40°C < Ta < 60°C) CSA Enclosure Type 4X
FM Division 2, Non-Incendive for Class I, Division 2,
Groups A, B, C, and D. Dust Ignition-proof for Class II,
III, Division 1, Groups E, F, and G / Indoor and outdoor
locations / NEMA Type 4X Temperature Code:
T4 (-40°C < Ta < 60°C)
ATEX type n, see note: Certificate number:
Baseefa10ATEX0044X, ATEX marking: Ex II 3 G, Ex nA
nL IIC T4 (-40 °C <= Ta <= 60 °C), rated voltage:
28 V, ATEX Dust Ignition-proof: Certificate number:
Baseefa10ATEX0045X, ATEX marking: II 3 D, Ex tD
A22 IP66 T135 (-40 °C <= Ta <= 60 °C), rated voltage:
28 V. Note on type n: Conditions for safe handling
during installation: The device does not pass the
500 V insulation test in accordance with paragraph
6.8.1 of EN 60079-15:2005. This must be taken into
account when installing the device.
IECEx type n, see note: Certificate number:
IECEx BAS 10.0014X, Ex nA nL IIC T4
(-40 °C <= Ta <= 60 °C), rated voltage: 28 V, IECEx
Dust Ignition-proof, see note: Certificate number:
IECEx BAS 10.0015X, Ex tD A22 IP66 T135
(-40 °C <= Ta <= 60 °C), rated voltage: 28 V. Note on
type n: Conditions for safe handling during installation: The device does not pass the 500 V insulation
test in accordance with paragraph 6.8.1 of
EN 60079-15:2005. This must be taken into account
when installing the device.
-
Yes
CSA Division 2 & Dust Ignition-proof for Class I,
Division 2, Groups A, B, C, and D. Dust Ignition-proof
for Class II, Groups E, F, and G / Suitable for Class III
Hazardous Locations. / Install per Siemens drawing
A5E02467236A. Temperature Code:
T4 (-40°C < Ta < 60°C) CSA Enclosure Type 4X
FM Division 2, Non-Incendive for Class I, Division 2,
Groups A, B, C, and D. Dust Ignition-proof for Class II,
III, Division 1, Groups E, F, and G / Indoor and outdoor
locations / NEMA Type 4X Temperature Code:
T4 (-40°C < Ta < 60°C)
ATEX type n, see note: Certificate number:
Baseefa10ATEX0044X, ATEX marking: Ex II 3 G, Ex
nA nL IIC T4 (-40 °C <= Ta <= 60 °C), rated voltage:
28 V, ATEX Dust Ignition-proof: Certificate number:
Baseefa10ATEX0045X, ATEX marking: II 3 D, Ex tD
A22 IP66 T135 (-40 °C <= Ta <= 60 °C), rated voltage:
28 V. Note on type n: Conditions for safe handling
during installation: The device does not pass the
500 V insulation test in accordance with paragraph
6.8.1 of EN 60079-15:2005. This must be taken into
account when installing the device.
IECEx type n, see note: Certificate number:
IECEx BAS 10.0014X, Ex nA nL IIC T4
(-40 °C <= Ta <= 60 °C), rated voltage: 28 V, IECEx
Dust Ignition-proof, see note: Certificate number:
IECEx BAS 10.0015X, Ex tD A22 IP66 T135
(-40 °C <= Ta <= 60 °C), rated voltage: 28 V. Note on
type n: Conditions for safe handling during installation: The device does not pass the 500 V insulation
test in accordance with paragraph 6.8.1 of
EN 60079-15:2005. This must be taken into account
when installing the device.
-
Wireless approval
FCC and IC approval
IC approval
Product functions
Management, configuration,
programming
Product function
• Web-based management
• DHCP client
Product functions Diagnostics
Product function
• Web-based diagnostics
• WirelessHART diagnostics via
Modbus
Product functions Security
Product functions Time
NTP protocol is supported
Standards, specifications,
approvals
Certificate of suitability
• CE mark
• Referred to CSA
• Referred to FM
• Referred to ATEX
• Referred to IECEx
Siemens IK PI · 2012
8/203
8
© Siemens AG 2011
Industrial Wireless Communication
WirelessHART
IE/WSN-PA LINK
■ Ordering data
Order No.
Accessories
Gateway between WirelessHART
and Industrial Ethernet;
transmission frequency: 2.4 GHz
• With integral,
non-detachable antenna
• N connector for connection of
external antennas
IE FC M12 Plug PRO
6GK1 411-6CA40-0AA0
6GK1 411-6CA40-0BA0
Antennas
Wall or mast-mounting
• Antenna ANT792-6MN
Antenna gain including
N-Connect connector 6 dBi,
2.4 GHz
Roof mounting
• ANT795-6MN antenna
Antenna gain incl. N-Connect
connector 6/8 dBi, 2.4/5 GHz
• Antenna mounting tool
(ANT795-6MN)
Mounting tool for installation of
ANT795-6MN under a roof
LP798-1N Lightning Protector
6GK5 792-6MN00-0AA6
6XV1 840-2AH10
6GK1 901-1GA00
6GK5 795-6MN00-0AA6
Preadjusted stripping tool
for fast stripping of the
Industrial Ethernet FC cables
6GK5 795-6MN01-0AA6
HARTING adapter cable 1)
M12 female NPT 1/2 thread to
RJ45 11 cm,
(minimum order quantity: 10);
The adapter is provided for easy
connection of the link to the
Industrial Ethernet;
21 03 683 6420
Not included in the scope of
delivery of the IE/WSN-PA link;
You can find ordering information
on the Internet at:
www.harting.com/en/kontakt/
adressen//
SITOP compact 24 V/ 0.6 A
6EP1 331-5BA00
6GK5 798-2LP00-2AA6
Antenna cables
1-phase power supply
with wide-range input
85 – 264 V AC/110 – 300 V DC,
stabilized output voltage 24 V,
rated output current value 0.6 A,
slim design
IWLAN N-Connect male/male
flexible connection cable
Flexible connecting cable for
connecting an external antenna;
assembled with two N-Connect
male connectors
•1m
•2m
•5m
• 10 m
6XV1 875-5AH10
6XV1 875-5AH20
6XV1 875-5AH50
6XV1 875-5AN10
HF coupling
6GK5 798-0CP00-1AA0
N-Connect male/male connector
for connecting the LP798-1N
lightning protector
■ More information
Current approvals can be found on the Internet at:
http://support.automation.siemens.com/WW/view/en/46374734
Siemens IK PI · 2012
6GK1 901-0DB20-6AA0
4-core, shielded TP installation
cable for connection to IE
FC Outlet RJ45/IE FC RJ45 Plug;
PROFINET-compatible;
with UL approval;
sold by the meter;
max. length 1000 m,
minimum order quantity 20 m
IE FC Stripping Tool
Lightning protector with N/N
female/female connector,
IP65 (-40 to +100 °C)
8/204
M12 plug-in connector suitable
for on-site assembly (D-coded,
IP65/IP67), metal housing,
FastConnect connection system,
for connecting HARTING adapter
cables to the Industrial Ethernet
• 1 unit
IE FC TP Standard Cable GP
2 x 2 (Type A)
Antennas with omni-directional
characteristics;
country permits,
compact instructions (hard copy),
German/English
8
Order No.
IE/WSN-PA LINK
1)
When using the Harting adapter cable for the Ethernet connection,
the requirements for intrinsic safety approval are not applicable.
When used in an application relevant to intrinsic safety guidelines,
it requires acceptance by the appropriate approval agency.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement