Cisco PDS1100 iDTA Adapter Quick Reference Guide

Cisco PDS1100 iDTA Adapter Quick Reference Guide
1)
2)
3)
4)
5)
6)
7)
Notice for Installers
The servicing instructions in this notice are for use by qualified service
personnel only. To reduce the risk of electric shock, do not perform any
servicing other than that contained in the operating instructions, unless you
are qualified to do so.
Note to System Installer
For this apparatus, the coaxial cable shield/screen shall be
grounded as close as practical to the point of entry of the cable
into the building. For products sold in the US and Canada, this
reminder is provided to call the system installer's attention to
Article 820-93 and Article 820-100 of the NEC (or Canadian
Electrical Code Part 1), which provides guidelines for proper
grounding of the coaxial cable shield.
Cisco PDS1100 iDTA Adapter
8)
9)
CAUTION: To reduce the risk of electric shock, do not
remove cover (or back). No user-serviceable parts
inside. Refer servicing to qualified service personnel.
WARNING
TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
This symbol is intended to alert you that uninsulated voltage
within this product may have sufficient magnitude to cause
electric shock.Therefore, it is dangerous to make any kind of
contact with any inside part of this product.
PDS1100
Ce symbole a pour but d’alerter toute personne qu’un contact
avec une pièce interne de ce produit, sous tension et non isolée,
pourrait être suffisant pour provoquer un choc électrique. Il est
donc dangereux d’être en contact avec toute pièce interne de
ce produit.
10)
This symbol is intended to alert you of the presence
of important operating and maintenance (servicing)
instructions in the literature accompanying this product.
11)
12)
Ce symbole a pour but de vous avertir qu’une
documentation importante sur le fonctionnement et
l’entretien accompagne ce produit.
20080814_Installer820
13)
14)
2
Protect from Exposure to Moisture and Foreign Objects
Battery Disposal
• The batteries may contain substances that could be harmful to the environment.
Eliminate AC Power/Mains Overloads
• Recycle or dispose of batteries in accordance with the battery manufacturer’s
instructions and local/national disposal and recycling regulations.
WARNING: Avoid electric shock and fire hazard! Do not overload AC
power/mains, outlets, extension cords, or integral convenience receptacles.
For products that require battery power or other power sources to operate
them, refer to the operating instructions for those products.
This product may contain disposable batteries. Heed the following warning and follow
the Battery Safety and Battery Disposal instructions below.
Power Source Warning
A label on this product indicates the correct power source for this product. Operate
this product only from an electrical outlet with the voltage and frequency indicated on
the product label. If you are uncertain of the type of power supply to your home or
business, consult your service provider or your local power company.
The AC inlet on the unit must remain accessible and operable at all times.
Ground the Product
WARNING: Avoid electric shock and fire hazard! If this product connects to
coaxial cable wiring, be sure the cable system is grounded (earthed). Grounding
provides some protection against voltage surges and built-up static charges.
WARNING: Avoid electric shock and fire hazard! Do not locate an outside
antenna system in the vicinity of overhead power lines or power circuits.
Touching power lines or circuits might be fatal.
This product may contain a tuner capable of receiving off-the-air broadcasts.
Protect the Product from Lightning
In addition to disconnecting the AC power from the wall outlet, disconnect the signal
inputs.
Verify the Power Source from the On/Off Power Light
When the on/off power light is not illuminated, the apparatus may still be connected to
the power source. The light may go out when the apparatus is turned off, regardless of
whether it is still plugged into an AC power source.
4
Protect the Product When Moving It
Always disconnect the power source when moving the apparatus or connecting or
disconnecting cables.
WARNING: Avoid electric shock and fire hazard! Do not expose this
product to dripping or splashing liquids, rain, or moisture. Objects filled with
liquids, such as vases, should not be placed on this apparatus.
• The batteries may contain perchlorate, a known hazardous substance, so special
handling and disposal of this product might be necessary. For more information about
perchlorate and best management practices for perchlorate-containing substance, see
www.dtsc.ca.gov/hazardouswaste/perchlorate
Handling Disposable Batteries
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A groundingtype plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
Unplug this apparatus during lightning storms or when unused for long
periods of time.
Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as a power-supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
3
20110316_Cable_Safety
Cisco PDS1100 iDTA Adapter
Model: PDS1100
Manufactured by:
Cisco Systems, Inc.
5030 Sugarloaf Parkway
Lawrenceville, Georgia 30044 USA
WARNING: Avoid electric shock and fire hazard! Unplug this product
before cleaning. Do not use a liquid cleaner or an aerosol cleaner. Do not use a
magnetic/static cleaning device (dust remover) to clean this product.
Provide Ventilation and Select a Location
• Remove all packaging material before applying power to the product.
WARNING: Avoid electric shock and fire hazard! Never push objects
through the openings in this product. Foreign objects can cause electrical
shorts that can result in electric shock or fire.
• Do not place this apparatus on a bed, sofa, rug, or similar surface.
• Do not place this apparatus on an unstable surface.
• Do not install this apparatus in an enclosure, such as a bookcase or rack, unless the
installation provides proper ventilation.
Battery Safety
• Insert batteries correctly. There may be a risk of explosion if the batteries are
incorrectly inserted.
• Do not place entertainment devices (such as VCRs or DVDs), lamps, books, vases
with liquids, or other objects on top of this product.
• Do not attempt to recharge ‘disposable’ or ‘non-reusable’ batteries.
Operating Environment
• Please follow instructions provided for charging ‘rechargeable’ batteries.
This product is designed for operation indoors with a temperature range from 32° to
122 F (0° to 50°C). Each product should have adequate spacing on all sides so that
the cooling air vents on the chassis are not blocked.
• Do not expose batteries to excessive heat (such as sunlight or fire).
• Do not expose batteries to temperatures above 100°C (212°F).
WARNING: Avoid electric shock! Do not open the cover of this product.
Opening or removing the cover may expose you to dangerous voltages. If you
open the cover, your warranty will be void. This product contains no userserviceable parts.
5
Check Product Safety
Upon completion of any service or repairs to this product, the service technician must
perform safety checks to determine that this product is in proper operating condition.
7
6
Open Source GNU GPL Statement
Welcome
Cisco PDS1100 iDTA Digital Transport Adapter contain(s), in part, certain free/open
source software (“Free Software”) under licenses which generally make the source
code available for free copy, modification, and redistribution. Examples of such licenses
include all the licenses sponsored by the Free Software Foundation (e.g. GNU General
Public License (GPL), GNU Lesser General Public License (LGPL), Berkeley Software
Distribution (BSD), the MIT licenses and different versions of the Mozilla and Apache
licenses). To find additional information regarding the Free Software, including a copy
of the applicable license and related information, please go to: (i) for North America
http://www.cisco.com/web/consumer/support/open_source.html, or (ii) for
outside North America http://www.cisco.com/web/consumer/support/open_
source.html#~international. Once at the site, search for the product listing and click
on the related items identified. If you have any questions or problems accessing any of
the links, please contact: [email protected]
The Cisco® PDS1100 iDTA Digital Transport Adapter (PDS1100 iDTA)
changes digital signals into signals you can view on an analog cable-ready
TV. Use the instructions in this guide to install the adapter. The consumer
support website provides news and information about this product. For more
information, please refer to:
http://www.cisco.com/web/consumer/support/index.html
About the Remote Control
Safety First
Before using this adapter, read the IMPORTANT SAFETY INSTRUCTIONS
section in the safety sheet.
Serial Number and MAC Address
Your service provider may ask for the serial number or the MAC address of
the adapter if your system requires troubleshooting in the future.
Look for the serial number and the MAC address on the bottom of the
adapter.
Write the serial number here: ____________________
Write the MAC address here: ____________________
Power on and off
1
2 Mute
Mute audio
2
3 0–9
Display specific channels
4 FAV
Display the Favorites list
5 CH+/
CH-
10
L
1
2
3
Scroll through channels
4
5
6
6 OK
Display the Favorites list
7
8
9
7 Red
Reserved for future use
NAV
0
FAV
Green
Display the Options menu
Yellow
Display messages
Blue
Switch between
TV/Radio channels
8 MENU
Display the Services Portal
9 Exit
Exit menus
10 VOL+/
VOL-
Adjust volume
11 NAV
Display the Navigator bar
8
Back Panel
1 Power
11
+
CH
10
VOL–
OK
3
3
CVBS
IR IN
2
4
CABLE OUT
5
CABLE IN
6
Connects to power cord
4
2 CVBS
Connects to the composite video input of the TV
5
3 R/L
Connects to left/right audio inputs of the TV
4 IR In
Connects the IR extension cable
5 TV Out
Connects to the RF input of the TV
6
6 Cable In
Connects to the coaxial cable that delivers the signal from
your service provider
7
Note: This illustration may vary from the actual product.
VOL+
–
MENU
1
R
1 Power
CH
9
Note: This illustration may vary from the
actual product.
9
The Cisco® PDS1100 Series Adapter receives digital signals from your service provider
and delivers programs in standard definition.
Please read the safety instructions before connecting the adapter.
Service Warnings
• Do not block ventilation openings.
• Replace batteries with the same or equivalent type that we recommend.
Notice to Consumers
8
T15350
WARNING: There is danger of explosion if the battery is mishandled
or incorrectly replaced. Replace only with the same type of battery. Do not
disassemble it or attempt to recharge it outside the system. Do not crush,
puncture, dispose of in fire, short the external contacts, or expose to water or
other liquids. Dispose of the battery in accordance with local regulations and
instructions from your service provider.
T16058
Quick Reference Guide
11
12
Connecting to a TV
Setup Wizard
WARNING: Electric shock hazard! Unplug all electronic devices
before connecting or disconnecting any device cables to the adapter.
R
CVBS
IR IN
CABLE OUT
Back
of TV
To Wall Jack
Cable In
In the next Setup Wizard screen, you
can select English as the language
the adapter will use for audio and for
menus and subtitles. Press OK.
In the final Setup Wizard screen, you
can confirm the settings you have
selected. Press OK.
In the next Setup Wizard screen,
you can choose the audio mode the
adapter will use for every channel.
Set Up Parental Control
PIN
Note: Read and follow the Setup
Wizard on-screen instructions.
CABLE IN
Cable
Input
T16060
L
The first time you turn on the adapter,
the system begins the auto scan.
1.
2.
3.
4.
5.
6.
Unplug all electronic devices before connecting the adapter.
Connect the adapter to the coaxial cable coming in from the wall.
Connect an IEC cable from the adapter to your TV.
Plug the DC cord from the external power supply into the adapter.
Plug the adapter’s external power supply and the TV into an AC power source.
If you purchased an approved IR Extender from your service provider, read
and follow the installation instructions for the IR Extender. The IR Extender
is an optional accessory.
7. Press the POWER key on the remote control.
Note: This illustration may vary from the actual product.
13
When the auto scan completes,
the Setup Wizard screen appears.
From the Setup Wizard screen, you
can select the default language and
audio and video settings. Press OK.
5. Press OK to select this setting.
9. Press OK.
10. Press the Exit key twice to
close the menus.
Important: Write down the PIN you
chose in step 8. You will use the PIN
to block and unblock TV programs
or channels for viewing.
Service Portal Options
Press MENU to display the Services
Portal. From the Services Portal,
press CH+ and CH- to highlight
a service, and then press OK to
select the service. Follow on-screen
instructions to use the service.
7. Press OK.
3. Press OK to select
Settings.
14
8. Enter a four-digit number that is
meaningful to you.
Note: The first time you set the
PIN, you must enter the Default
PIN number (4321). Later, you
will be prompted to enter a
four-digit PIN number that is
meaningful to you.
2. Press CH+ or CH- to highlight
Settings.
When the option you want to use is
shown, press OK.
4. Press CH- four times to highlight
Set Block PIN/Set PIN.
6. Press 4-3-2-1 to enter the default
PIN.
1. Press Menu to display the
Services Portal screen.
Press VOL– or VOL+ to scroll
through the audio options.
15
16
Favorites
Mosaic
Displays the Favorites list. From
the Favorites list, you can choose
pre-defined bouquets/favorites and
any bouquets/favorites that you have
created.
Lists Mosaic channels (if supported
by your service provider). A Mosaic
channel displays four channels on
the TV screen at once. For example,
a Sports Pick mosaic channel would
display four different sports channels
at once.
Settings
Messages
Lists default system settings for you
to change.
Displays messages sent to you by
your service provider.
Channel List
Lists all channels for you to scroll
through and select a channel to watch.
18
Factory Settings
Disclaimer
Selecting Factory Settings will reset your adapter to the default selections.
Troubleshooting
Cisco Systems, Inc. assumes no responsibility for errors or omissions that
may appear in this guide. We reserve the right to change this guide at any
time without notice.
If the adapter does not perform as expected, the following tips may help. If
you need further assistance, contact your service provider.
Wall Mounting
No Picture
Follow these steps to mount the adapter on a wall.
• Plug the TV and adapter into an electrical outlet that has been verified to
have power.
• Verify that all cables are properly connected.
• Verify that the Power to the TV is turned on.
• Verify that the TV is set to the proper input.
1. Secure two screws 98 millimeters (3.86 inches) apart into a wall, with the
space between the underside of each screw head and the surface of the
wall equal to 6.5 millimeters (1/4 inch).
20
19
Cisco TAN: XX-XXXXX-XX
Manufacture Date: XXXXXXXX
Input 12V , 1.67A
E362186
This device complies with part 15 of the FCC rules.
Operations subject to the following two conditions:
(1)This device may not cause harmful interference,
and (2)This device must accept any interference
received, including interference that may cause
undesired operation.
MAC XXXXXXXXXXXXXX
Digital Set-Top
Model: PDS1100
Cisco PID: XXXXXXXXXX
S/N XXXXXXXXXX
17
All Rights Reserved. Manufactured under license from Cisco
Systems, Inc. PowerKEY is a registered trademark of Cisco Systems, Inc.
XXXXXXXX
Made in XXXXX
2. Locate the mounting screw slots on the bottom of the adapter.
3. Hang the adapter on the screws.
No Color
CAUTION: If you mount the adapter into drywall, you must
secure the screws with two wall anchors. If you do not anchor the
adapter properly, the cable connections could pull the adapter from
the wall.
Mounting Holes
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other
countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks
mentioned are the property of their respective owners. The use of the word partner does not imply a partnership
relationship between Cisco and any other company. (1110R)
T16059
• Verify that the current TV program is broadcast in color.
• Adjust the TV color controls.
• Verify that all cables are properly connected.
No Sound
•
•
•
•
Verify that the TV and adapter are properly connected to an electrical outlet.
Verify that all cables are properly connected.
Verify that the TV is set to the proper input.
Verify that the volume is turned on for both the TV and the adapter.
21
© 2013 Cisco and/or its affiliates. All rights reserved.
Note: This illustration may vary from the actual product.
22
Printed in China
23
Last Updated: July 2013
78-100200-01
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement