Brodit ProClip 834830
27 January, 2015,, © 2015 Brodit AB
Product 834830
834830 ProClip
Console mount
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288348308
Item no 834830 fits:
Nissan Sentra 13-15 (For USA)
1 (2)
Please read all of the instructions and look at the pictures before attaching the ProClip. It is very important to
position this ProClip exactly as shown in the pcitures.
1. Press the thin end of the enclosed gap opener upward into the seam/gap in the console sidewall, to widen the
gap. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel off the adhesive
tape cover on the ProClip.
2. Press the angled edge on the left side of the ProClip into the gap between the center console panel and the
panel surrounding the gear shift.
3. Press down on the top right side of the ProClip so the angled edge on the right side flexes downward. Hook the
lower angled edge into the gap next to the gap opener. Pull out the gap opener.
4. The ProClip is in place.
2 (2)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF