COMFORT PRODUCTS Operation Guide 2.4 GHz Wireless color camera and wireless receiver with record function Model No.:CC-130 Version No.: 1.0 Please read this user Manual carefully before using this product! CONTENTS 1. Features 1 2. Packing List 2 3. Connection Diagram 3 4. Structure 4 5. Installation 5 6. Receiver Operation 9 7. Specifications 8. FCC & EU 12 Back Cover Features Wireless transmission to enhance monitoring security; Ease to install and use. With high integration, complete auxiliary products; Motion detection. Adopting highly inteligent technology, the recorder can automatically detects image change and start recording, which prevents invalid recording; Recording with SD card. Supporting both AVI recording and JPEG shooting to different working environments application; 4 channels optional to avoid short-distance; The receiver has a video input for wired camera. -1- Packing List 2.4GHz Wireless Camera x 1 2.4GHz Wireless Receiver x 1 Antenna for Receiver x 1 Adapter for Receiver x 1 Adapter for Camera x 1 Video Cable x 2 Connection Diagram Camera adapter Receiver adapter Camera Receiver Monitor/TV AV Output -2- DVDR Structure Camera Antenna Infrared Lights Lens Universal Bracket Power Jack -3- Receiver Antenna Up Button OK Button Down Button Right Button Left Button Menu Button Channel Switch Record Button Channel Indicator Automatic Detection /Recording Indicator Play Button Power Indicator Video In Power Socket Power ON/Off SD Card Slot Video Out -4- Installation 1. If the picture are affected by the interference and could not display, just rotate widdershins and screw out the anti-water shell of camera; and pull-out the channel cap besides the lens; install it to a suitable channel as following: 1 O F 2 F channel switch O N Channel 1 1 O F 2 F O N Channel 3 1 O F 2 F O N Channel 2 1 O F 2 F O N Channel 4 2. Locate the camera to a specific position and then adjust it to a suitable angle. 3. Connect the adapter to the camera. -5- 4. Connect the antenna to the receiver. 5. Connect the receiver to a monitor/TV with AV cable. AV Cable 6. Connect the adapter for receiver to the receiver. -6- 7. Please insert SD Card to SD Card Slot of receiver. Usable capacity:32MB-2GB 1GB-2GB recommended If the SD Card is inserted incorrectly or is not inserted, the monitor/TV will display ＂SD Card not plug in＂, and only real-time monitoring is available at this time. Notes : * Make sure the protection switch on SD Card is turned on. * Never touch the metal part of the SD Card with bare hands for static electricity of human body may cause permanent damage to the SD Card. * Insert or pull out the SD Card only when the equipment is turned off. 8. Push the power switch to ON position and the power indicator lights up. 9. Power on the monitor/TV and select AV mode. -7- 10. Set the channel of receiver same as that of camera by pressing the channel button continuously, and image will be displayed on the monitor/TV. Press Channel Button continuously, the Channel Indicator lights up.If the Channel Indicator flashes once, the channel is channel 1. If the Channel Indicator flashes twice continuously, the channel is channel 2. If the Channel Indicator flashes three times continuously, the channel is channel 3. If the Channel Indicator flashes four times continuously, the channel is channel 4. 11. Adjust the brightness, contrast and color of the monitor/TV for the perfect effect. -8- Receiver Operation 1. Menu Key Operation You are recommended to press menu key to set before its first use. Note: You can not set the menu during the recording. Monitor/AV displays picture as follows, Press <Left/Right> key to select and press OK key to enter setting. Date/Time set up: Press the <Left/Right> and <Up/Down> keys to set the date and time of the equipment. Motion Detect ON/OFF set up: Press OK key to change the setting. If you choose ON , the receiver can automatically record or capture photos when motion detected. If you choose OFF, the receiver is only in real-time monitoring status. Capture Format AV/Photo set up: Press the OK key to change the setting. If you choose capture format AV, when motion detected, the receiver will automatically record videos. If you choose capture format Photo, when motion detected, the receiver will automatically capture photos. -9- Advanced setup: Picture displays as follows, Press <Left/Right> key to select and press OK key to enter setting. A B E F C D G A. TV setup: Press OK key to choose PAL or NTSC. B. Quality setup: Press OK key to choose High or Low. High (high quality) is recommended. C. Motion Detect Area setup: Press OK key to enter the detection area modification window, and press the Left or Right key to modify the value. After pressing OK key, the system enters detection location modification windows. D. Motion Detect Count setup: Press OK key to select 1, 3 or 5 photos should be taken when motion detected. For example, if count 3 is selected, when motion detected, the receiver will capture 3 photos every interval time. E. Motion Detect Interval setup: Press OK key to set the interval time 1, 3 or 5 seconds. For example, if 3 seconds is selected, when motion detected, photos will be captured every 3 seconds. F. Motion Detect sensitivity setup: Press Up or Down key to modify the value and press OK key to exit. G: Exit: Press OK key to return. Exit: Press OK key to return. -10- 2. Shortcut keys on monitoring /Motion Detection Mode Monitor/TV window as following: 20s 2010 / 09 / 20 16 : 08 : 26 :the icon indicates that the SD Card is inserted; : the icon indicates the motion detection function is on, if this function off, the icon will not display. Press Up key to enable/disable automatical motion detection. / :Shooting/Recording mode.Press Down key to switch between shooting and recording mode. Press Left/Right key: setup the record time among 5-30 seconds. Press Record key : Capture pictures or record manually. 3. Play mode Press Play key to replay saved videos or pictures. Press play key again to enter the monitoring mode. After entering replay mode, Press Down directly to play a latest video or picture. After entering replay mode, Press Left/Right to select folder, and press Down to play. After entering replay mode, Press OK key to enter/exit the folder selection window, there are six-lattice mode every interface, Press Left/Right key to select file named with date and time, press Down to play. Press Menu key to delete a file after you select it. There are 4 icons for options. Exit Delete file Format Delete all Delete file: Delete a single picture or video. Delete all: Delete all pictures and videos. Format: Format SD Card. Exit: Press to return. -11- SPECIFICATIONS Items 812BF CMOS 720×480 (NTSC); 720×576(PAL) FM CAMERA Imaging Sensor Total Pixels Modulation Type Transmission Frequency ISM 2,400~2,483MHz Transmission Power 2mW/FCC,10wm/CE 0 Lux Minimum Illumination Night Vision range Bandwidth Power Supply Consumption Current(Max.) 7m 18MHz 8VDC 160mA&250mA 45×78×83 (mm) 217 g 50 ohm SMA Dimensions(W x D x H) Weight(about) Antenna RECEIVER Intermediate Frequency 480MHz ISM 2,400~2,483MHz 1.1Vpp±[email protected] ohm, 1.1Vpp±[email protected] ohm, Transmission Frequency Video Output Signal Level Video Input Signal Level Storage Media SD Card 2G SD Card memory(max.) Received Sensitivity Consumption Current (Max.) Unobstructed Effective Range Dimensions(W×D×H) Weight(About) Power Supply Voltage Operating Temperature Operating Humidity(Max.) ≤-85dBm 590mA 100m 80 ×127×18(mm) 178g 5VDC O O O O -10 C~+50 C/+14 C~+122 C 85%RH * Channel Frequency: CH1=2,414MHz; CH2=2,432MHz; CH3=2,450MHz; CH4=2,468MHz * Actual transmission range may vary according to the weather, location, interference and building construction. * All the specifications are subject to minor change without prior notice. -13- FCC INFORMATION This device complies with part15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Declaration of Conformity: We, Trebs BV, declare under our sole responsibility that this product is in conformity with the essential requirements and other relevant requirements of the R&TTE Directive (1999/5/EC). The product is compliant with the following standards and/ or other normative documents: EN 50371 : 2002 EN 60065 : 2002 + A1 : 2006 EN301 489-3 vl. 4.1 (2002-08) EN300 440 -2 vl. 2.1 (2004-07) Trebs BV. The Netherlands Website: http://www.trebs.nl email: [email protected] CAUTIONS The receiver shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Turn off the Camera/Monitor if the system is not in use. The adapter is used as the disconnect device from the mains. The adapter shall remain readily operable. The Camera/Monitor can only be completely disconnected from the mains by unplug the adapter. Do not cut the DC power cable of the apparatus to fit with another power source. Attention should be drawn to the environment aspects of battery disposal. EU Environmental Protection Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. The graphics included are subject to minor change without notice.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project