Epson Europe EB-685Wi Projector User Manual
advertisement
User's Guide
Contents
Notations Used in This Guide 7
Introduction to Your Projector 8
Projector Features.............................................................................. 9
Enlarge and Project Your Files with the Document Camera .................................. 11
Projector Parts and Functions ........................................................ 12
Setting Up the Projector 22
Projector Placement ........................................................................ 23
Projector Connections ..................................................................... 26
Connecting to a Computer for VGA Video and Audio.............................................. 26
Connecting to a Computer for USB Video and Audio............................................... 27
2
Connecting to a Computer for HDMI Video and Audio ........................................... 28
Connecting to a Component-to-VGA Video Source .................................................. 30
Installing Batteries in the Remote Control.................................... 38
Installing Batteries in the Pens....................................................... 39
Remote Control Operation.............................................................. 40
Using Basic Projector Features 41
Turning On the Projector ................................................................ 42
Turning Off the Projector ................................................................ 45
Setting the Date and Time .............................................................. 46
Selecting the Language for the Projector Menus ......................... 48
Projection Modes ............................................................................. 49
Changing the Projection Mode Using the Remote Control.......................................... 49
Focusing the Image.......................................................................... 51
Contents
Adjusting the Image Height............................................................ 54
Image Shape..................................................................................... 55
Resizing the Image with the Buttons ............................................. 62
Adjusting the Image Position ......................................................... 63
Selecting an Image Source.............................................................. 64
Image Aspect Ratio .......................................................................... 66
Adjusting the Image Color.............................................................. 70
Controlling the Volume with the Volume Buttons ....................... 72
Using the Interactive Features 73
Interactive Feature Modes .............................................................. 74
Preparing Before Using Interactive Features................................ 75
3
Drawing on a Projected Image (Annotation Mode) ..................... 86
Using the Projected Screen as a Whiteboard (Whiteboard
Control Computer Features from a Projected Screen
(Computer Interactive Mode) ......................................................... 90
Interacting with the Screen............................................................. 96
Using the Interactive Features over a Network.......................... 103
Precautions when Connecting to a Projector on a Different Subnet..................... 103
Windows Pen Input and Ink Tools ............................................... 104
Interactive Features when Projecting Two Images
Simultaneously............................................................................... 106
Interactive Features when Projecting with Two Projectors ...... 109
Using the Interactive Features Temporarily on Only One of the Projectors........ 109
Contents
Adjusting Projector Features 111
Projecting Two Images Simultaneously ...................................... 112
Unsupported Input Source Combinations for Split Screen Projection .................. 113
Projecting a PC Free Presentation ............................................... 115
Shutting Off the Image and Sound Temporarily ........................ 120
Stopping Video Action Temporarily ............................................ 121
Zooming Images............................................................................. 122
Using the Remote Control as a Wireless Mouse ......................... 123
Using the Remote Control as a Pointer ....................................... 125
Saving a User's Logo Image .......................................................... 126
Saving a User Pattern .................................................................... 128
Using Multiple Projectors ............................................................. 129
Projector Identification System for Multiple Projector Control................................. 129
Projecting Images from the HDMI3 Port with the Optional
Interface Box................................................................................... 137
Projector Security Features .......................................................... 139
4
Using the Projector on a Network 144
Wired Network Projection............................................................. 145
Wireless Network Projection ........................................................ 148
Monitoring and Controlling the Projector 155
EasyMP Monitor ............................................................................. 156
Controlling a Networked Projector Using a Web Browser ........ 157
Setting Up Projector Network E-Mail Alerts ............................... 159
Setting Up Monitoring Using SNMP............................................. 160
Using ESC/VP21 Commands ........................................................ 161
PJLink Support ............................................................................... 163
Contents
Crestron RoomView Support........................................................ 164
Controlling a Networked Projector Using Crestron RoomView................................ 164
Adjusting the Menu Settings 168
Using the Projector's Menus ......................................................... 169
Using the On-screen Keyboard..................................................... 170
Image Quality Settings - Image Menu ......................................... 171
Input Signal Settings - Signal Menu............................................. 173
Projector Feature Settings - Settings Menu ................................ 175
Projector Setup Settings - Extended Menu................................. 178
Projector Network Settings - Network Menu.............................. 184
Projector Setup Settings - ECO Menu .......................................... 191
Projector Information Display - Info Menu ................................. 193
Projector Reset Options - Reset Menu ......................................... 195
5
Copying Menu Settings Between Projectors (Batch Setup) ...... 196
Maintaining the Projector 199
Cleaning the Projection Window.................................................. 200
Cleaning the Obstacle Sensor....................................................... 201
Cleaning the Projector Case.......................................................... 202
Air Filter and Vent Maintenance .................................................. 203
Projector Lamp Maintenance ....................................................... 207
Replacing the Remote Control Batteries ..................................... 212
Replacing the Interactive Pen Battery ......................................... 213
Replacing the Interactive Pen Tip ................................................ 214
Solving Problems 216
Projection Problems ...................................................................... 217
Projector Indicator Status ............................................................. 218
Using the Projector Help Displays................................................ 220
Solving Image or Sound Problems............................................... 221
Solutions When Image is Incorrect Using the USB Display Function ..................... 221
Contents
Solutions When the Image Brightness or Colors are Incorrect ................................. 224
Solutions When Image File Names are not Displayed Correctly in PC Free......... 226
Solving Projector or Remote Control Operation Problems....... 227
Solution When "The Battery that Saves Your Clock Settings is Running Low"
Solving Interactive Features Problems........................................ 229
Solutions When "Error Occurred in the Easy Interactive Function" Message
Solutions When You Cannot Operate a Computer from the Projected Screen . 230
Solutions When the Interactive Pen Position Is Not Accurate................................... 230
Solutions When the Interactive Pens Are Slow or Difficult to Use........................... 231
Solutions When the Interactive Touch Operation Does Not Work.......................... 231
Solving Network Problems ........................................................... 232
Solutions When You Cannot Access the Projector Through the Web ................... 232
Solutions When the Image Contains Static During Network Projection............... 232
6
Appendix 234
Optional Accessories and Replacement Parts............................. 235
Screen Size and Projection Distance............................................ 237
Supported Monitor Display Resolutions ..................................... 239
Projector Specifications ................................................................ 241
External Dimensions...................................................................... 243
USB Display System Requirements .............................................. 245
Easy Interactive Driver System Requirements............................ 246
List of Safety Symbols (corresponding to IEC60950-1 A2) ........ 247
Notations Used in This Guide
Safety Symbols
The projector and its manuals use graphical symbols and labels to indicate content that tells you how to use the projector safely.
Read and carefully follow the instructions that are marked with these symbols and labels to avoid injury to persons or damage to property.
This symbol indicates information that, if ignored, could possibly result in personal injury or even death.
Warning
This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.
Caution
General Information Notations
This label indicates procedures that may result in damage or injury if sufficient care is not taken.
Attention
[Button name]
Menu/Setting name s
This label indicates additional information that may be useful to know.
Indicates the name of the buttons on the remote control or the control panel.
Example: [Esc] button
Indicates projector menu and setting names.
Example:
Select the Image menu s
Image > Advanced
This label indicates links to the related pages.
This label indicates a page where detailed information regarding a topic can be found.
Introduction to Your Projector
Refer to these sections to learn more about your projector's features and part names.
g Related Links
• "Projector Parts and Functions" p.12
Projector Features
This projector comes with this special features. Refer to these sections for more details.
g Related Links
• "Unique Interactive Functions" p.9
Unique Interactive Functions
Easy annotation on the projected screen using the interactive pen or your finger (EB-695Wi/EB-685Wi/EB-680Wi/EB-675Wi).
• Easily print, save, and deliver your presentations.
• Computer operations from the projected screen.
• Touch-based interactivity using your finger (EB-695Wi/EB-680Wi).
Quick and Easy Setup
• Direct Power On feature to turn on the projector as soon as you plug it in.
• Auto Power On feature to turn on the projector when the projector detects an image signal from the port you specified as the Auto Power On source.
• Home screen feature to easily select an input source and useful functions.
g Related Links
• "Projector Setup Settings - Extended Menu" p.178
• "Turning On the Projector" p.42
Flexible Connectivity
This projector supports a wide variety of easy-to-use connectivity options as shown below.
g Related Links
• "Connect with Computers" p.10
• "Connect with Mobile Devices" p.10
• "Enlarge and Project Your Files with the Document Camera" p.11
9
• Annotation with or without a computer.
• Annotation with two pens at the same time.
• Quick and easy toolbar to aid you in annotating the screen.
• Projector operations from the projected screen.
Projector Features
Connect with Computers
• Connect with one USB cable to project images and output audio (USB
Display).
• EasyMP Multi PC Projection to project up to four images at the same time by splitting the projected screen. You can project images from computers on the network, or from smartphones or tablet devices on which Epson iProjection is installed.
See the EasyMP Multi PC Projection Operation Guide for details.
a • When projecting images using a wireless LAN, you must install the
Epson 802.11b/g/n wireless LAN module, and then set up your projector and computer for wireless projection.
The Epson 802.11b/g/n wireless LAN module may not be included with your projector.
• You can download the necessary software and manuals from the following Web site: http://www.epson.com/ g Related Links
• "Optional Accessories and Replacement Parts" p.235
• "Connecting to a Computer" p.26
• "Using the Projector on a Network" p.144
Connect with Mobile Devices
• HDMI1/MHL port to connect an MHL cable to the mobile device and to the projector.
10
• Epson iProjection to connect your projector and mobile device wirelessly using the app available on App Store or Google play.
a Any fees incurred when communicating with the App Store or
Google play are the responsibility of the customer.
g Related Links
• "Connecting to Smartphones or Tablets" p.29
Projector Features
Enlarge and Project Your Files with the Document Camera
Optional document camera to project paper document and objects.
You can operate the optional document camera from the projected screen
(EB-695Wi/EB-685Wi/EB-680Wi/EB-675Wi).
You cannot operate ELPDC06/ELPDC11/ELPDC12/ELPDC20 from the projected screen.
11
Projector Parts and Functions
The following sections explain the projector parts and their functions.
All of the features in this guide are explained using illustrations of EB-695Wi unless otherwise mentioned.
g Related Links
• "Projector Parts - Front/Side" p.12
• "Projector Parts - Top/Side" p.13
• "Projector Parts - Interface" p.14
• "Projector Parts - Base" p.16
• "Projector Parts - Control Panel" p.16
• "Projector Parts - Remote Control" p.17
• "Projector Parts - Interactive Pens" p.19
• "Projector Parts - Pen Tray" p.20
• "Projector Parts - Touch Unit" p.20
Projector Parts - Front/Side
12
Name
A
Remote receiver
B
Lamp cover
C
Lamp cover screw
Function
Receives signals from the remote control.
Open to access the projector's lamp.
Screw to fix the lamp cover in place.
Projector Parts and Functions
Name
D
Air exhaust vent
E
Cable cover screws
F
Cable cover
G
Control panel
H
Speaker
Function
Exhaust vent for air used to cool the projector internally.
Warning
Do not look into the vents. If the lamp explodes, gases may escape and small fragments of glass may be scattered which could cause an injury. Contact a doctor if any fragments of broken glass are inhaled or get into the eyes or mouth.
Caution
While projecting, do not put your face or hands near the air exhaust vent, and do not place objects that may become warped or damaged by heat near the vent. Hot air from the air exhaust vent could cause burns, warping, or accidents to occur.
Screws to fix the cable cover in place.
Loosen the two screws and open the cover when connecting cables for external devices or installing the wireless LAN module.
Operates the projector.
Outputs audio.
Projector Parts - Top/Side
13
Name
A
Filter cover latch
B
Wireless LAN indicator
Function
Opens and closes the air filter cover.
Indicates the access status of the optional wireless LAN module.
Projector Parts and Functions
Name
C
Interactive pen receiver
(EB-695Wi/EB-
685Wi/EB-
680Wi/EB-675Wi)
D
Obstacle sensor
Function
Receives signals from the interactive pen.
Detects obstacles that are interfering with the projection area.
E
Remote receiver Receives signals from the remote control.
F
Projection window Images are projected from here.
Warning
• Do not look into the projection window while projecting.
• Do not place any objects or put your hand near the projection window. It could cause burns, fire, or the object to warp because this area reaches a high temperature due to the concentrated projection light.
G
Security slot
H
Air filter cover
I
Air intake vent (air filter)
J
Focus lever
The security slot is compatible with the Microsaver
Security System manufactured by Kensington.
Open to access the air filter or focus lever.
Takes in air to cool the projector internally.
Adjusts the image focus.
Open the air filter cover to operate.
Projector Parts - Interface
14
Name
A
Wireless LAN module slot
B
Audio 1 port
Function
Install the optional Wireless LAN module.
C
D
E
F
Computer1 port
Audio 2 port
USB-B port
LAN port
Inputs audio from equipment connected to the
Computer1 port.
Inputs image signals from a computer and component video signals from other video sources.
Inputs audio from equipment connected to the
Computer2 port.
Connects a USB cable to the computer to project computer images or to use the Wireless Mouse function.
Connects the projector to a computer via the supplied
USB cable to use the interactive pen as a mouse (EB-
695Wi/EB-685Wi/EB-680Wi/EB-675Wi).
Connects a LAN cable to connect to a network.
Projector Parts and Functions
Name
G
HDMI1/MHL port Inputs video signals from HDMI compatible video equipment and computers, or MHL (Mobile High-
Definition) compatible mobile devices.
This projector is compatible with HDCP.
H
Monitor Out/
Computer2 port
When Monitor Out Port is set to Monitor Out in the projector's Extended menu, analog RGB signals input from the Computer1 port are output to an external monitor. You cannot output signals input from other ports or component video signals.
When Monitor Out Port is set to Computer2 in the projector's Extended menu, image signals from a computer and component video signals from other video sources are input.
s
Extended > Operation > Monitor Out Port
I
HDMI2 port
J
K
HDMI3 port
RS-232C port
Inputs video signals from HDMI compatible video equipment and computers.
This projector is compatible with HDCP.
Inputs video signals from HDMI compatible video equipment and computers.
This projector is compatible with HDCP.
Connects an RS-232C cable to control the projector from a computer. (This port is for control use and should not normally be used.)
L
SYNC IN/OUT port
(EB-695Wi/EB-
685Wi/EB-
680Wi/EB-675Wi)
M
Power inlet
N
TCH port
(EB-695Wi/EB-
680Wi)
O
USB-A port
Function
When using the interactive features in the same room as multiple versions of the same projector, you need to connect the optional remote control cable set to the projectors. When the cable set is connected, the interactive pen operates smoothly.
Connects the power cord to the projector.
Connects the supplied Touch Unit connection cable to the Touch Unit.
Connects a USB memory device or a digital camera and projects movies or images using PC Free.
Connects the optional Document Camera.
15
Name
P
Video port
Q
Audio port
R
Audio Out port
S
Mic port
Function
Inputs composite video signals from video sources.
Inputs audio from equipment connected to the Video port.
Inputs audio from other devices when projecting images from the device connected to the USB-A port.
Outputs audio from the current input source or Mic port to an external speaker.
Inputs audio from the microphone.
Projector Parts and Functions
Projector Parts - Base
16
Name
C
Rear foot fixing points (two points)
Function
Attach the feet when using the projector on a surface such as a desk. (Only models with feet supplied)
D
Wall mount fixing points (four points)
F
Front foot fixing point
Attach the supplied or optional setting plate when mounting on a wall.
E
Illumination sensor Detects the brightness of the surroundings, and automatically adjusts the brightness of the screen. Set
Power Consumption to Auto in the projector's ECO menu.
Attach the foot with a spacer when using the projector on a surface such as a desk. (Only models with feet supplied)
Projector Parts - Control Panel
Name
A
Ceiling mount fixing points (five points)
B
Security cable attachment point
Function
Attach the optional ceiling mount here when suspending the projector from a ceiling.
Pass a commercially available wire lock through here and lock it in place.
Do not pass drop-prevention wires through here when mounting the projector on a wall or suspending it from a ceiling.
Name
A
[Source Search] button
Function
Changes to the next input source.
Projector Parts and Functions
Name
C
Keystone adjustment buttons and arrow buttons
D
[Esc] button
Function
B
[Enter] button [ ] Enters the current selection and moves to the next level while displaying the projector's menu or help.
Optimizes Tracking, Sync., and Position in the projector's Signal menu while projecting an analog
RGB signal from the Computer port.
From now on, referred to as the [Enter] button.
Displays the Keystone screen allowing you to correct keystone distortion.
Selects menu items while displaying the projector's menu or help.
Stops the current function.
Moves back to the previous menu level while displaying the projector's menu.
E
Wide/Tele buttons and arrow buttons : Enlarges the size of the projected image.
F
G
H
I
[Menu] button
[Home] button
Power button [
Indicators
]
: Reduces the size of the projected image.
Corrects keystone distortion in the horizontal direction when the Keystone screen is displayed.
Selects menu items while displaying the projector's menu or help.
Displays and closes the projector's menu.
Displays and closes the Home screen.
Turns the projector on or off.
From now on, referred to as the power button.
Indicates the projector's status.
g Related Links
• "Input Signal Settings - Signal Menu" p.173
• "Projector Indicator Status" p.218
• "Correcting the Image Shape with the Keystone Buttons" p.55
Projector Parts - Remote Control
17
Projector Parts and Functions
Name
F
[Aspect] button
G
[Num] button
H
I
[Menu] button
Arrow buttons
Function
A Power button [ ] Turns the projector on or off.
From now on, referred to as the power button.
B
[Computer] button Switches the image source between the Computer1 and
Computer2 ports.
C
[HDMI/Video] button
D
Numeric buttons
Switches the image source between the HDMI and
Video ports.
Enters numbers in the projector's menu while holding down the [Num] button.
E
[Auto] button Optimizes Tracking, Sync., and Position in the projector's Signal menu while projecting an analog
RGB signal from the Computer port.
Changes the aspect mode.
Hold down this button to enter numbers using the numeric buttons.
Displays and closes the projector's menu.
Selects menu items while displaying the projector's menu or help.
J
[Enter] button [ ] Enters the current selection and moves to the next level while displaying the projector's menu or help.
Acts as a mouse's left button when using the Wireless
Mouse function.
From now on, referred to as the [Enter] button.
K
[User] button Performs settings assigned in the User Button setting in the projector's Settings menu.
L
[Page] up/down buttons
Controls page up and down on your computer when you connect a projector and computer using a USB cable or over a network.
Displays the previous or next screen while using the PC
Free feature.
M
[E-Zoom] +/– buttons
Zooms in or zooms out the image area.
N
[A/V Mute] button Turns the video and audio on or off temporarily.
18
Name
O
[Split] button
P
Strap attachment point
Q
[Home] button
R
[Freeze] button
S
[Volume] up/down buttons
T
[Pointer] button
U
[Esc] button
Function
Projects two images from different image sources simultaneously by splitting the projected screen.
Allows you to attach a commercially available strap to the remote control.
Displays and closes the Home screen.
Pauses or resumes images.
Adjusts the speaker volume.
Displays the on-screen pointer.
Stops the current function.
Moves back to the previous menu level while displaying the projector's menu.
Acts as a mouse's right button when using the Wireless
Mouse function.
V
[Pen Mode] button Changes between operating the computer or drawing using the interactive pen.
W
[ID] button Hold down this button and press the numeric buttons to select the ID for the projector you want to operate using the remote control.
X
[Color Mode] button Changes the color mode.
Y
[Link Menu] button Displays the settings menu for the device linked to the projector's HDMI ports.
Z
[LAN] button Switches the image source between the network connected devices.
a
[USB] button Switches the image source between the USB Display and USB-A port.
Changes to the next input source.
b
[Source Search] button c
Remote control light emitting area
Outputs remote control signals.
Projector Parts and Functions
Projector Parts - Interactive Pens
The interactive pens come with the EB-695Wi/EB-685Wi/EB-680Wi/EB-
675Wi only.
Hold the pen to turn it on automatically. Pens turn off automatically after 15 seconds when you put them down.
19
Name
C
Button
D
Strap attachment point
E
Battery cover
Function
When Pen Button Function is set to Eraser in the projector's Extended menu, press the button to switch the tip function between pen and eraser while drawing.
When Pen Button Function is set to Open Drawing
Toolbar, press the button to display the toolbar near the pen tip.
When Pen Button Function is set to Clear Screen, press the button to erase all the contents drawn on the projected screen.
s
Extended > Easy Interactive Function > General
> Advanced > Pen Button Function
Press the button to perform a right-click operation while using the pen as a mouse.
Allows you to attach a commercially available strap.
Open this cover when replacing the battery.
g Related Links
• "Replacing the Interactive Pen Tip" p.214
Name
A
Pen tip
B
Battery indicator
Function
Replaceable soft pen tip.
If the soft tip is hard to use on a textured surface, replace it with the hard tip.
Press the button on the side of the pen to indicate the remaining battery power.
• When the battery is charged, the indicator turns blue until you release the button.
• When the battery is running low, the indicator flashes blue until you release the button.
• Does not light when the battery is exhausted. Change the battery.
Projector Parts and Functions
Projector Parts - Pen Tray
The pen tray comes with the EB-695Wi/EB-685Wi/EB-680Wi/EB-675Wi only.
Front
When the dial cover is not attached
Name
A
Fixing points
B
Security lock hole
Function
Attach the pen tray to a whiteboard or wall.
Pass a commercially available lock through here.
a It is recommended that the pen tray be tightened with two commercially available M5 bolts.
Projector Parts - Touch Unit
The Touch Unit comes with the EB-695Wi/EB-680Wi only.
Name
A
Dial cover
B
TCH port
C
Security slot
D
Adjustment dials
E
Indicator
F
Screw holes (for installation)
Function
Remove to use the adjustment dials.
Connects the projector to the Touch Unit with the
Touch Unit connection cable.
The security slot is compatible with the Microsaver
Security System manufactured by Kensington.
Perform angle adjustments.
Lit when the Touch Unit is turned on.
The screw holes for securing the Touch Unit.
20
Projector Parts and Functions
Rear
Name Function
A
Laser diffusion ports Diffuse laser light to detect the position of fingers.
B
Installation magnets Magnets used for installation.
Warning
Do not use the Touch Unit near medical equipment such as pace makers.
Furthermore, when using the Touch Unit, make sure there is no medical equipment such as pace makers, in the surrounding area. Electromagnetic interference may cause medical equipment to malfunction.
Caution
• Do not use the Touch Unit near magnetic storage media such as magnetic cards, or precision electronic devices such as computers, digital watches, or cell phones.
Data could be corrupted or a malfunction could occur.
• When installing the Touch Unit on a magnetic surface, be careful not to trap your fingers or any other part of your body between the magnet and the installation surface.
Attention
• Do not connect the Touch Unit to any devices except for EB-695Wi/EB-680Wi.
The device could malfunction, or laser light could leak beyond the limit.
• Make sure you use the supplied Touch Unit connection cable. Operations are not possible with a commercially available cable.
• When disposing of the Touch Unit, do not disassemble it. Dispose according to your local or national laws and regulations.
a See the Installation Guide for the Touch Unit installation methods and angle adjustment methods.
21
Setting Up the Projector
Follow the instructions in these sections to set up your projector.
g Related Links
• "Projector Connections" p.26
• "Installing Batteries in the Remote Control" p.38
• "Installing Batteries in the Pens" p.39
• "Remote Control Operation" p.40
Projector Placement
You can install the projector on a wall, or place it on a table to project images.
You need the optional mounts when suspending the projector from a ceiling, installing it on a wall, or placing it vertically on a table.
Note the following points when selecting a projector location:
• Place the projector on a sturdy, level surface or install it using a compatible mount.
• Leave plenty of space around and under the projector for ventilation, and do not place it on top of or next to anything that could block the vents.
• Position the projector within reach of a grounded electrical outlet or extension cord.
• Place the projector parallel to the screen.
a If you cannot install the projector parallel to the screen, correct keystone distortion using the projector controls.
Warning
• A special method of installation is required when suspending the projector from a wall or ceiling. If you do not install the projector correctly, it could fall and cause damage or injury.
• Do not use adhesives on the wall mount plate fixing points or the ceiling mount fixing points to prevent the screws from loosening, or use lubricants, oils, or similar substances on the projector; the projector case may crack causing it to fall from its mount. This could cause serious injury to anyone under the mount and could damage the projector.
• Do not cover the projector's air intake or air exhaust vents. If the vents are covered, the internal temperature could rise and cause a fire.
• Do not install the projector on an unstable surface or in a location beyond the weight specifications of the projector. Otherwise, it could fall or topple causing an accident and injury.
• When installing the projector in a high position, take measures to prevent falling by using wires to ensure safety in an emergency, such as an earthquake, and to prevent accidents. If it is not installed correctly, it could fall causing an accident and injury.
Attention
• If you are using the projector at altitudes above 1500 m, set the High Altitude
Mode setting to On in the projector's Extended menu to ensure the projector's internal temperature is regulated properly.
s
Extended > Operation > High Altitude Mode
• Try not to setup the projector in locations subject to high humidity and dust, or in locations subject to smoke from fires or tobacco smoke.
g Related Links
• "Projector Setup and Installation Options" p.23
• "Settings when Using the Interactive Features" p.24
• "Optional Accessories and Replacement Parts" p.235
• "Projector Setup Settings - Extended Menu" p.178
Projector Setup and Installation Options
You can set up or install your projector in the following ways:
Front/Rear a Attach the feet (if supplied) when using the projector on a surface such as a desk.
23
Projector Placement
Front Upside Down/Rear Upside Down
Front Upside Down/Rear Upside Down (Vertically)
Make sure you select the correct Projection option in the projector's
Extended menu according to the installation method being used.
a • The default Projection setting is Front/Upside Down.
• You can change the Projection setting as follows by pressing down the [A/V Mute] button on the remote control for about five seconds.
• Switch Front to/from Front/Upside Down
• Switch Rear to/from Rear/Upside Down g Related Links
Settings when Using the Interactive Features
When using the interactive features, project from in front of the screen (EB-
695Wi/EB-685Wi/EB-680Wi/EB-675Wi).
Set Projection to Front/Upside Down or Front.
Attention
The interactive features are operated using infrared communication. Note the following points when installing the projector.
• Make sure there is no strong light or sunlight shining on the interactive pen receiver, the projection screen, the projector itself, or the rear of the projector.
• Do not install the projector where it could be subjected to direct sunlight through a window. This could cause the interactive features to malfunction.
• Install the projector so that the interactive pen receiver is not too close to fluorescent lights. If the surrounding area is too bright, the interactive features may not operate correctly.
• If there is any dust stuck to the interactive pen receiver, it could interfere with infrared communication and the interactive features may not operate correctly.
Clean the receiver if it is dirty.
• Do not put paint or any stickers on the cover of the interactive pen receiver.
• When using the interactive features, do not use an infrared remote control or microphone in the same room. The interactive pen could malfunction.
• Do not use devices that generate powerful noise, such as rotary devices or transformers, near the projector, as the interactive features may not operate correctly.
24
Projector Placement a • We recommend using a smooth, board type screen without any unevenness. If the projection screen is uneven, there may be distortions in the projected image.
• Distortions may occur in the projected image depending on the material of the screen and the installation method.
• When using the interactive features, install the projector so that the projected screen is a rectangle without any distortion.
• When using the interactive features in the same room as multiple projectors, interactive pen operations may become unstable. In this case, connect the optional remote control cable set to the projectors, and change Sync of Projectors to Wired from the projector's
Extended menu.
s Extended > Easy Interactive Function > General > Advanced >
Sync of Projectors g Related Links
• "Settings when Using the Touch Unit" p.25
• "Connecting Multiple Projectors of the Same Model" p.35
Settings when Using the Touch Unit
When using the Touch Unit, install the projector using one of the following methods (EB-695Wi/EB-680Wi). The Touch Unit cannot be used if another installation method is used.
• Mount the projector on a wall or suspend it from a ceiling and project images from in front of the screen (the setting plate or ceiling mount is required).
• Install vertically on a desk and project from the front of the desk (the interactive table mount is required).
g Related Links
• "Optional Accessories and Replacement Parts" p.235
25
Projector Connections
You can connect the projector to a variety of computer, video, and audio sources to display presentations, movies, or other images, with or without sound.
Attention
Check the shape and orientation of the connectors on any cable you plan to connect. Do not force a connector into a port if it does not fit. The device or your projector could be damaged or could malfunction.
a See the Quick Start Guide for a list of cables supplied with your projector. Purchase optional or commercially available cables when necessary.
• Connect a computer that has a USB port, standard video output (monitor) port, or HDMI port.
• For video projection, connect devices such as DVD players, gaming consoles, digital cameras, and smartphones with compatible video output ports.
• If your presentation or video includes sound, you can connect audio input cables.
• For slide shows or presentations without a computer, you can connect USB devices (such as a flash drive or camera) or the optional Epson document camera.
g Related Links
• "Connecting to a Computer" p.26
• "Connecting to Smartphones or Tablets" p.29
• "Connecting to Video Sources" p.29
• "Connecting to External USB Devices" p.32
• "Connecting to a Document Camera" p.33
• "Connecting to External Output Devices" p.33
• "Connecting Multiple Projectors of the Same Model" p.35
• "Optional Accessories and Replacement Parts" p.235
Connecting to a Computer
Follow the instructions in these sections to connect a computer to the projector.
g Related Links
• "Connecting to a Computer for VGA Video and Audio" p.26
• "Connecting to a Computer for USB Video and Audio" p.27
• "Connecting to a Computer for HDMI Video and Audio" p.28
Connecting to a Computer for VGA Video and Audio
You can connect the projector to your computer using a VGA computer cable.
You can play sound through the projector's speaker system by connecting a commercially available 3.5 mm stereo mini-jack audio cable.
a • To connect a Mac that does not have a VGA video port, you need an adapter that allows you to connect to the projector's VGA video port.
• To project an image source connected to the Monitor
Out/Computer2 port, set Monitor Out Port to Computer2 in the projector's Extended menu.
s Extended > Operation > Monitor Out Port
• You can also set the port used for audio input from the projector's menu.
s Extended > A/V Settings > Audio Output
• Make sure the audio cable is labeled "No resistance".
a Connect the VGA computer cable to your computer's monitor port.
26
Projector Connections b Connect the other end to a Computer port on the projector.
c Tighten the screws on the VGA connector.
d Connect the audio cable to your laptop's headphone or audio-out jack, or your desktop's speaker or audio-out port.
e Connect the other end to the projector's Audio port.
27
Connecting to a Computer for USB Video and Audio
If your computer meets the system requirements, you can send video and audio output to the projector through the computer's USB port. This function is called USB Display. Connect the projector to your computer using a USB cable.
a • If you use a USB hub, the connection may not operate correctly.
Connect the USB cable directly to the projector.
• To use the USB Display function, select USB Display/Easy
Interactive Function or Wireless Mouse/USB Display as the USB
Type B setting in the projector's Extended menu (EB-695Wi/EB-
685Wi/EB-680Wi/EB-675Wi).
a Connect the cable to your projector's USB-B port.
b c d
Connect the other end to any available USB port on your computer.
Turn on the projector and your computer.
Do one of the following to install the Epson USB Display software:
Projector Connections a You only need to install this software the first time you connect the projector to the computer.
• Windows: Select Run EMP_UDSE.EXE in the dialog box that is displayed to install the Epson USB Display software.
• OS X: The Epson USB Display setup folder is displayed on your screen. Select USB Display Installer and follow the on-screen instructions to install the Epson USB Display software. If the USB
Display Setup folder is not displayed automatically, double-click
EPSON_PJ_UD > USB Display Installer.
e Follow any on-screen instructions.
Do not disconnect the USB cable or turn off the projector until the projector displays an image.
The projector displays the image from your computer's desktop and outputs sound if your presentation contains audio.
a • If the projector does not project any images, do one of the following:
• Windows: Click All Programs > EPSON Projector > Epson USB
Display > Epson USB Display Ver.x.xx.
• OS X: Double-click the USB Display icon in the Application folder.
• When you finish projection, do one of the following:
• Windows: Disconnect the USB cable. You do not need to operate
Safely Remove Hardware.
• OS X: Select Disconnect from the USB Display icon menu on the menu bar or Dock, and then disconnect the USB cable.
g Related Links
• "USB Display System Requirements" p.245
Connecting to a Computer for HDMI Video and Audio
If your computer has an HDMI port, you can connect it to the projector using an HDMI cable and send the computer's audio with the projected image.
a To connect a Mac that does not have an HDMI port, you need an adapter that allows you to connect to the projector's HDMI port.
Contact Apple for compatible adapter options. Older Mac computers
(2009 and earlier) may not support audio through the HDMI port.
a b
Connect the HDMI cable to your computer's HDMI output port.
Connect the other end to the projector's HDMI port.
a If you have problems hearing audio through the HDMI connection, connect one end of a commercially available 3.5 mm stereo mini-jack audio cable to the projector's Audio port and the other end to your computer's audio out port. Select the audio input port you connected to in the projector's Extended menu.
s
Extended > A/V Settings > HDMI1 Audio Output s
Extended > A/V Settings > HDMI2 Audio Output s
Extended > A/V Settings > HDMI3 Audio Output g Related Links
• "Projector Setup Settings - Extended Menu" p.178
28
Projector Connections
29
Connecting to Smartphones or Tablets
You can connect the projector to smartphones and tablets using a MHL cable and send the audio with the projected image.
a • You may not be able to project correctly, depending on the model and settings of the smartphone or tablet.
• You may not be able to connect an MHL cable to all devices. Contact the manufacturer of your smartphone or tablet device to check if your device supports MHL.
a Connect the MHL cable to your device's Micro-USB port.
b Connect the other end to the projector's HDMI1/MHL port.
Connecting to Video Sources
Follow the instructions in these sections to connect video devices to the projector.
a • If the port on the device you connect has an unusual shape, use the cable supplied with the device or an optional cable to connect to the projector.
• The cable differs depending on the output signal from the connected video devices.
• Some video devices are capable of outputting different types of signals. See your video device manual to confirm what type of signals can be output.
g Related Links
• "Connecting to an HDMI Video Source" p.30
• "Connecting to a Component-to-VGA Video Source" p.30
• "Connecting to a Composite Video Source" p.31
Attention
If you connect an MHL cable that does not support the MHL standards, the smartphone or tablet device may become hot, or leakage or explosion may happen.
The connected smartphone or tablet begins charging when images are projected. If you connect using a MHL-HDMI conversion adapter, charging the smartphone or tablet device may not work or you may not be able to perform operations using the projector's remote control.
a • Charging may not work when using a lot of power, such as when playing a movie.
• Charging does not work when the projector is in standby mode or the battery in a smartphone or tablet is depleted.
a If images are not projected correctly, disconnect and then reconnect the MHL cable.
Projector Connections
Connecting to an HDMI Video Source
If your video source has an HDMI port, you can connect it to the projector using an HDMI cable and send the image source's audio with the projected image.
Attention
Do not turn on the video source before connecting it to the projector. Doing so could damage the projector.
a b
Connect the HDMI cable to your video source's HDMI output port.
Connect the other end to the projector's HDMI port.
30 a If you have problems hearing audio through the HDMI connection, connect one end of a commercially available 3.5 mm stereo mini-jack audio cable to the projector's Audio port and the other end to your video source's audio out port. Select the audio input port you connected to in the projector's Extended menu.
s Extended > A/V Settings > HDMI1 Audio Output s Extended > A/V Settings > HDMI2 Audio Output s Extended > A/V Settings > HDMI3 Audio Output g Related Links
• "Projector Setup Settings - Extended Menu" p.178
Connecting to a Component-to-VGA Video Source
If your video source has component video ports, you can connect it to the projector using a component-to-VGA video cable. Depending on your component ports, you may need to use an adapter cable along with a component video cable.
You can play sound through the projector's speaker system by connecting a stereo mini-jack audio cable.
a • To project an image source connected to the Monitor
Out/Computer2 port, set Monitor Out Port to Computer2 in the projector's Extended menu.
s
Extended > Operation > Monitor Out Port
• You can also set the port used for audio input in the projector's
Extended menu.
s Extended > A/V Settings > Audio Output
• Make sure the audio cable is labeled "No resistance".
a Connect the component connectors to your video source's color-coded component video output ports.
a The ports usually labeled Y, Pb, Pr or Y, Cb, Cr. If you are using an adapter, connect these connectors to your component video cable.
Projector Connections b Connect the VGA connector to a Computer port on the projector.
c d e
Tighten the screws on the VGA connector.
Connect the audio cable to your video source's audio-out ports.
Connect the other end to the projector's Audio port.
If your image colors appear incorrectly, you may need to change the Input
Signal setting in the projector's Signal menu.
s
Signal > Advanced > Input Signal g Related Links
• "Input Signal Settings - Signal Menu" p.173
Connecting to a Composite Video Source
If your video source has a composite video port, you can connect it to the projector using a RCA-style video or A/V cable.
You can play sound through the projector's speaker system by connecting a stereo mini-jack audio cable.
a Make sure the audio cable is labeled "No resistance".
a Connect the cable with the yellow connector to your video source's yellow video output port.
b Connect the other end to the projector's Video port.
31
Projector Connections c Connect the audio cable to your video source's audio-out ports.
d Connect the other end to the projector's Audio port.
Connecting to External USB Devices
Follow the instructions in these sections to connect external USB devices to the projector.
g Related Links
• "USB Device Projection" p.32
• "Connecting to a USB Device" p.32
• "Disconnecting a USB Device" p.33
USB Device Projection
You can project images and other content without using a computer or video device by connecting any of these devices to your projector:
• USB flash drive
• Digital camera or smartphone
• USB hard drive
• Multimedia storage viewer a • Digital cameras or smartphones must be USB-mounted devices, not
TWAIN-compliant devices, and must be USB Mass Storage Classcompliant.
• USB hard drives must meet these requirements:
• USB Mass Storage Class-compliant (not all USB Mass Storage
Class devices are supported)
• Formatted in FAT or FAT32
• Self-powered by their own AC power supplies (bus-powered hard drives are not recommended)
• Avoid using hard drives with multiple partitions
You can project slide shows from image files on a connected USB device.
g Related Links
• "Projecting a PC Free Presentation" p.115
Connecting to a USB Device
You can connect your USB device to the projector's USB-A port and use it to project images and other content.
a If your USB device came with a power adapter, plug the device into an electrical outlet.
32
Projector Connections
33 b Connect the USB cable or USB flash drive to the projector's USB-A port as shown.
Attention
• Use the USB cable supplied with or specified for use with the device.
• Do not connect a USB hub or a USB cable longer than 3 meters, or the device may not operate correctly.
c Connect the other end to your device, if necessary.
Disconnecting a USB Device
When you have finished presenting with a connected USB device, disconnect the device from the projector.
a Turn off and unplug the device, if necessary.
b Disconnect the USB device from the projector.
Connecting to a Document Camera
You can connect a document camera to your projector to project images viewed by the camera.
The connection method varies depending on your Epson document camera model. See the document camera manual for details.
Connecting to External Output Devices
Follow the instructions in these sections to connect external devices to the projector.
g Related Links
• "Connecting to a VGA Monitor" p.33
• "Connecting to External Speakers" p.34
• "Connecting a Microphone" p.35
Connecting to a VGA Monitor
If you connected the projector to a computer using a Computer port, you can also connect an external monitor to the projector. This lets you see your presentation on the external monitor even when the projected image is not visible.
Projector Connections a • If you want to output images to an external monitor when the projector is turned off, you need to do the following:
• Select Communication On as the Standby Mode setting in the projector's ECO menu.
• Select Always On as the A/V Output setting in the projector's
Extended menu.
s Extended > A/V Settings > A/V Output
• To output images to an external monitor, set Monitor Out Port to
Monitor Out in the projector's Extended menu.
s Extended > Operation > Monitor Out Port
• Content drawn on the screen using the interactive features is not displayed on an external monitor (EB-695Wi/EB-685Wi/EB-
680Wi/EB-675Wi). To display the drawn content on an external monitor, use the supplied Easy Interactive Tools.
• Monitors that use a refresh rate of less than 60 Hz may not be able to display images correctly.
a Make sure your computer is connected to the projector's Computer port.
a • If there are two computer ports, make sure you use the
Computer1 port.
• Only analog RGB signals from the Computer1 port can be output to an external monitor. You cannot output signals input from other ports or component video signals.
b Connect the external monitor's cable to your projector's Monitor Out port.
34
Connecting to External Speakers
To enhance the sound from your presentation, you can connect the projector to external self-powered speakers. You can control the volume using the projector's remote control.
a • If you want to output audio from the external speakers when the projector is turned off, you need to do the following:
• Select Communication On as the Standby Mode setting in the projector's ECO menu.
• Select Always On as the A/V Output setting in the projector's
Extended menu.
s Extended > A/V Settings > A/V Output
• You can also connect the projector to an amplifier with speakers.
• The projector's built-in speaker system is disabled when you connect external speakers.
a Make sure your computer or video source is connected to the projector with both audio and video cables as necessary.
Projector Connections b Locate the appropriate cable to connect your external speakers, such as a stereo mini-jack-to-pin-jack cable, or another type of cable or adapter.
c Connect one end of the cable to your external speakers as necessary.
d Connect the stereo mini-jack end of the cable to your projector's Audio
Out port.
a • Plug-in-power is not supported.
• Adjust Mic Input Level if the microphone audio is difficult to hear, or if it is too loud resulting in a crackling sound.
s Settings > Mic Input Level a Connect the microphone cable to the projector's Mic port.
35
Connecting a Microphone
You can connect a microphone to the projector's Mic port to provide audio support during presentations.
If you want to output audio from a microphone when the projector is turned off, you need to do the following:
• Select Communication On as the Standby Mode setting in the projector's
ECO menu.
• Select Always On as the A/V Output setting in the projector's Extended menu.
b Turn on the microphone, if necessary.
Connecting Multiple Projectors of the Same Model
If you use the interactive features of multiple projectors of the same model in the same room, you need to synchronize the projectors. To do this, connect the optional remote control cable set to the SYNC port on each projector.
Projector Connections a Connect one end of the cable to the SYNC IN port on one projector, and connect the other end to the SYNC OUT port on the other projector.
c Select the Extended menu and press [Enter].
36 a If you are connecting three or more projectors, connect the projectors in a chain as shown.
d Select the Easy Interactive Function setting and press [Enter].
b Press the [Menu] button on the control panel or remote control.
Projector Connections e In the General section, select Advanced, and then press [Enter].
a • If you are using the projector in the same room as another projector that does not support cable connection, set the
Wired Sync Mode setting to Mode 2 in the projector's
Extended menu.
s Extended > Easy Interactive Function > General >
Advanced > Wired Sync Mode
• If you do not have the optional remote control cable set, change the Distance of Projectors setting in the projector's
Extended menu.
s Extended > Easy Interactive Function > General >
Advanced > Distance of Projectors
37 f Select Sync of Projectors and press [Enter].
g h
Select Wired and press [Enter].
Press [Menu] or [Esc] to exit the menus.
Installing Batteries in the Remote Control
The remote control uses the two AA batteries that came with the projector.
Attention
Make sure you read the Safety Instructions before handling the batteries.
a Remove the battery cover as shown.
38
Warning
Check the positions of the (+) and (–) marks inside the battery holder to ensure the batteries are inserted the correct way. If the batteries are not used correctly, they could explode or leak causing a fire, injury, or damage to the product.
c Replace the battery cover and press it down until it clicks into place.
b Insert the batteries with the + and – ends facing as shown.
Installing Batteries in the Pens
Each pen uses one AA battery.
Attention
Make sure you read the Safety Instructions before handling the battery.
a Open the battery cover as shown.
c Replace the battery cover and press it down until it clicks into place.
39 b Insert the battery with the + and – ends facing as shown.
Warning
Check the positions of the (+) and (–) marks inside the battery holder to ensure the battery are inserted the correct way. If the battery is not used correctly, it could explode or leak causing a fire, injury, or damage to the product.
Remote Control Operation
The remote control lets you control the projector from almost anywhere in the room.
Make sure that you aim the remote control at the projector's receivers within the distance and angles listed here.
a Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands. If you are not going to use the remote control for a long time, remove the batteries.
40
Using Basic Projector Features
Follow the instructions in these sections to use your projector's basic features.
g Related Links
• "Turning On the Projector" p.42
• "Turning Off the Projector" p.45
• "Setting the Date and Time" p.46
• "Selecting the Language for the Projector Menus" p.48
• "Adjusting the Image Height" p.54
• "Resizing the Image with the Buttons" p.62
• "Adjusting the Image Position" p.63
• "Selecting an Image Source" p.64
• "Adjusting the Image Color" p.70
• "Controlling the Volume with the Volume Buttons" p.72
Turning On the Projector
Turn on the computer or video equipment you want to use after you turn on the projector.
a Connect the power cord to the projector's power inlet and plug it into an electrical outlet.
The projector's power indicator turns blue. This indicates that the projector is receiving power, but is not yet turned on (it is in standby mode).
b Press the power button on the control panel or remote control to turn on the projector.
The projector beeps and the status indicator flashes blue as the projector warms up. Once the projector is warmed up, the status indicator stops flashing and turns blue.
42
Try the following if you do not see a projected image.
• Turn on the connected computer or video device.
• Change the screen output from the computer when using a laptop computer.
• Insert a DVD or other video media, and press play (if necessary).
• Press the [Source Search] button on the control panel or remote control to detect the source.
• Press the button for the desired video source on the remote control.
• If the Home screen is displayed, select the source you want to project.
Warning
• Never look into the projector lens when the lamp is on. This can damage your eyes and is especially dangerous for children.
• When turning on the projector at a distance using the remote control, make sure there is no one looking into the lens.
• During projection, do not block the light from the projector with a book or other objects. If the light from the projector is blocked, the area on which the light shines becomes hot which could cause it to melt, burn, or start a fire. Also, the lens may get hot due to the reflected light which could cause the projector to malfunction. To stop projection, use the A/V Mute function, or turn off the projector.
• A mercury lamp with high internal pressure is used as the projector's light source. If the lamp is subjected to vibrations or shocks, or if it is used for an overly extended length of time, the lamp may break or it may not turn on. If the lamp explodes, gases may escape and small fragments of glass may be scattered which could cause an injury. Be sure to observe the instructions below.
• Do not disassemble or damage the lamp or subject it to any impacts.
• Do not bring your face close to the projector while it is in use.
• Particular care should be taken when the projector is installed to a wall or ceiling, as small pieces of glass may fall down when the lamp cover is removed.
When cleaning the projector or replacing the lamp yourself, be very careful not to allow such pieces of glass to get into the eyes or mouth.
If the lamp breaks, ventilate the area immediately, and contact a doctor if any fragments of broken glass are inhaled or get into the eyes or mouth.
Turning On the Projector a • When the Direct Power On setting is set to On in the projector's
Extended menu, the projector turns on as soon as you plug it in.
Note that the projector also turns on automatically in cases such as recovery from a power outage.
s Extended > Operation > Direct Power On
• If you select a specific port as the Auto Power On setting in the projector's Extended menu, the projector turns on as soon as it detects a signal or cable connection from that port.
s Extended > Operation > Auto Power On g Related Links
• "Projector Setup Settings - Extended Menu" p.178
• "Projector Setup Settings - ECO Menu" p.191
Home Screen
The Home screen feature allows you to easily select an image source and access useful functions. You can display the Home screen by pressing the
[Home] button on the control panel or remote control. The Home screen is also displayed when you turn on the projector and no signal is being input from the selected input source.
Press the arrow buttons on the control panel or remote control to select a menu item, and then press [Enter].
43
You can also select menu items using the interactive pen or your finger (EB-
695Wi/EB-685Wi/EB-680Wi/EB-675Wi).
A
Selects the source you want to project.
B
Displays the QR code and projects data on a smartphone or tablet device.
C
Displays the Help screen.
D
Closes the Home screen.
E
Makes settings for the interactive features (EB-695Wi/EB-685Wi/EB-680Wi/EB-
675Wi).
F
Displays the current projector status when you change the setting such as
Power Consumption on the Home screen using the interactive pen or your finger (EB-695Wi/EB-685Wi/EB-680Wi/EB-675Wi).
G
Performs menu options assigned to Home Screen in the projector's Extended menu.
H
Projects two images from different image sources simultaneously by splitting the projected screen.
Turning On the Projector
I
Selects the brightness mode of the projector's lamp.
a The Home screen disappears after 10 minutes of inactivity.
g Related Links
• "Projector Setup Settings - Extended Menu" p.178
• "Using a QR Code to Connect a Mobile Device" p.152
• "Using the Projector's Menus" p.169
• "Using the Projector Help Displays" p.220
• "Connecting to a Computer" p.26
44
Turning Off the Projector
Turn off the projector after use.
a • Turn off this product when it is not in use to prolong the life of the projector. Lamp life varies depending on the mode selected, environmental conditions, and usage. Brightness decreases over time.
a Press the power button on the control panel or remote control.
The projector displays a shutdown confirmation screen.
b Press the power button again. (To leave it on, press any other button.)
The projector beeps twice, the lamp turns off, and the status indicator turns off.
a With Epson's Instant Off technology, there is no cool-down period so you can pack up the projector for transport right away.
c To transport or store the projector, make sure the power indicator is blue (but not flashing) and the status indicator is off, then unplug the power cord.
45
Setting the Date and Time
You can set the date and time for the projector (EB-695Wi/EB-685Wi/EB-
680Wi/EB-675Wi).
a Turn on the projector.
b Press the [Menu] button on the control panel or remote control.
You see this screen: c e
Select the Extended menu and press [Enter].
d Select the Operation setting and press [Enter].
Select the Date & Time setting and press [Enter].
You see this screen: g Select Date, press [Enter], and use the displayed keyboard to enter today's date.
h Select Time, press [Enter], and use the displayed keyboard to enter the current time.
i Select Time Difference (UTC), press [Enter], and set the time difference from Coordinated Universal Time.
j When you are finished, select Set and press [Enter].
46 f Select the Date & Time setting and press [Enter].
Setting the Date and Time k To activate daylight saving time, select the Daylight Saving Time setting and press [Enter]. Then select settings.
o Press [Menu] or [Esc] to exit the menus.
47 l When you are finished, select Set and press [Enter].
m To update the time automatically through an Internet time server, select the Internet Time setting and press [Enter]. Then select settings.
n When you are finished, select Set and press [Enter].
Selecting the Language for the Projector Menus
If you want to view the projector's menus and messages in another language, you can change the Language setting.
a Turn on the projector.
b Press the [Menu] button on the control panel or remote control.
f Press [Menu] or [Esc] to exit the menus.
48 c Select the Extended menu and press [Enter].
d e
Select the Language setting and press [Enter].
Select the language you want to use and press [Enter].
Projection Modes
Depending on how you positioned the projector, you may need to change the projection mode so your images project correctly.
• Front lets you project from a table in front of the screen.
• Front/Upside Down (default setting) flips the image over top-to-bottom to project upside-down from a ceiling or wall mount.
• Rear flips the image horizontally to project from behind a translucent screen.
• Rear/Upside Down flips the image over top-to-bottom and horizontally to project from a ceiling or wall mount and behind a translucent screen.
g Related Links
• "Changing the Projection Mode Using the Remote Control" p.49
• "Changing the Projection Mode Using the Menus" p.49
• "Projector Setup and Installation Options" p.23
Changing the Projection Mode Using the Remote
Control
You can change the projection mode to flip the image over top-to-bottom.
a Turn on the projector and display an image.
b Hold down the [A/V Mute] button on the remote control for 5 seconds.
c To change projection back to the original mode, hold down the [A/V
Mute] button for 5 seconds again.
Changing the Projection Mode Using the Menus
You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the projector menus.
a b
Turn on the projector and display an image.
Press the [Menu] button on the control panel or remote control.
49
The image disappears briefly and reappears flipped top-to-bottom.
Projection Modes c Select the Extended menu and press [Enter].
d Select Projection and press [Enter].
e f
Select a projection mode and press [Enter].
Press [Menu] or [Esc] to exit the menus.
50
Focusing the Image
You can display the test pattern, and then adjust the focus.
a Press the [Menu] button on the control panel or remote control.
c Select Pattern and press [Enter].
b Select the Settings menu and press [Enter].
d Select Test Pattern and press [Enter].
51 a When projecting images on a 4:3 screen using a wide-screen projector, select 4:3 for Installation Guide in the projector's
Settings menu.
Focusing the Image e Open the air filter cover.
f Move the focus lever and focus to the center-bottom of the projected screen.
52
Focusing the Image g Check that the focus matches the corners of the projected screen.
h To remove the test pattern, press the [Esc] button on the remote control or the control panel.
53 a If any areas are out of focus, use the focus lever to adjust until the corners are the same focus.
Adjusting the Image Height
If you are projecting from a table or other flat surface and the image is too high or low, you can adjust the image height using the projector's adjustable feet (only for models supplied with the feet).
The larger the angle of tilt, the harder it becomes to focus. Locate the projector so that it only needs to be tilted at a small angle.
a b
Turn on the projector and display an image.
To adjust the image height, rotate the front or rear feet to extend or retract them.
c If the image is tilted, rotate the rear feet to adjust their height.
54
A
Extend the rear foot
B
Retract the rear foot
If the projected image is unevenly rectangular, you need to adjust the image shape.
g Related Links
A
Extend the front or rear feet
B
Retract the front or rear feet
Image Shape
You can project an even, rectangular image by placing the projector directly in front of the center of the screen and keeping it level. If you place the projector at an angle to the screen, or tilt it up or down, or off to the side, you may need to correct the image shape.
g Related Links
• "Correcting the Image Shape with the Keystone Buttons" p.55
• "Correcting the Image Shape with Quick Corner" p.56
• "Correcting Image Shape with Curved Surface" p.58
Correcting the Image Shape with the Keystone
Buttons
You can use the projector's keystone correction buttons to correct the shape of an image that is unevenly rectangular.
b Press one of the keystone adjustment buttons on the control panel to display the Keystone adjustment screen.
55
You can use keystone buttons to correct images up to 3º right, left, up, or down.
a Turn on the projector and display an image.
Image Shape c Press a keystone button to adjust the image shape.
56 g Related Links
• "Projector Feature Settings - Settings Menu" p.175
Correcting the Image Shape with Quick Corner
You can use the projector's Quick Corner setting to correct the shape and size of an image that is unevenly rectangular.
After correction, your image is slightly smaller.
a If the projector is installed out of your reach, you can also correct the shape of the image using the remote control.
s Settings > Geometry Correction > H/V-Keystone a Turn on the projector and display an image.
b Press the [Menu] button on the control panel or remote control.
Image Shape c Select the Settings menu and press [Enter].
57 e Select Quick Corner and press [Enter]. Press [Enter] again if necessary.
You see the area selection screen.
f Use the arrow buttons to select the corner of the image you want to adjust. Then press [Enter].
d Select Geometry Correction and press [Enter].
a To reset the Quick Corner corrections, hold down [Esc] for about two seconds while the area selection screen is displayed, and then select Yes.
g Press the arrow buttons to adjust the image shape as necessary.
To return to the area selection screen, press [Enter].
Image Shape a • If you see this screen, you cannot adjust the shape any further in the direction indicated by the gray triangle.
Correcting Image Shape with Curved Surface
You can use the projector's Arc Correction setting to adjust the shape of an image projected on a curved or spherical surface.
58 h i
Repeat steps 6 and 7 as needed to adjust any remaining corners.
When you are finished, press [Esc].
The Geometry Correction setting is now set to Quick Corner in the projector's Settings menu. The next time you press the keystone adjustment buttons on the control panel, the area selection screen is displayed.
g Related Links
• "Projector Feature Settings - Settings Menu" p.175
a Turn on the projector and display an image.
b Press the [Menu] button on the control panel or remote control.
Image Shape c Select the Settings menu and press [Enter].
d Select Geometry Correction and press [Enter].
e Select Arc Correction and press [Enter].
f Select Arc Correction and press [Enter].
You see the area selection screen.
g Use the arrow buttons to select the area of the image you want to adjust, then press [Enter].
59
Image Shape a To reset the Arc Correction settings, hold down [Esc] for about two seconds while the area selection screen is displayed, and then select Yes.
h Press the arrow buttons to adjust the image shape of the selected area as necessary.
To return to the area selection screen, press [Enter].
a If you see this screen, you cannot adjust the shape any further in the direction indicated by the gray triangle.
a To save the current shape of an image you have adjusted, select
Save Memory in the Arc Correction setting. You can save up to three image shapes in the Arc Correction memory.
60 g Related Links
• "Loading Image Shape Setting from Memory" p.60
Loading Image Shape Setting from Memory
You can load the settings you made and saved in the Arc Correction setting.
a Before loading the memory, make sure the Geometry Correction setting is set to Arc Correction in the projector's Settings menu.
a Turn on the projector and display an image.
i Repeat steps 7 and 8 as needed to adjust any remaining areas.
j When you are finished, press [Esc].
Image Shape b Hold down the [Num] button on the remote control, and then press the numeric button (1, 2, or 3) that matches the number of the saved setting.
c When you have finished loading the settings, follow the on-screen instructions.
a • You can also load the settings from Load Memory in the projector's
Settings menu.
• When an MHL compatible mobile device is connected to the projector, load the settings from Load Memory in the projector's
Settings menu.
s Settings > Geometry Correction > Arc Correction > Load
Memory
61
Resizing the Image with the Buttons
You can resize the image using the Wide and Tele buttons.
a Turn on the projector and display an image.
b Press the Wide button on the projector's control panel to enlarge the image size. Press the Tele button to reduce the image size.
62
Adjusting the Image Position
You can use the Image Shift feature to adjust the image position without moving the projector.
a This feature is not available if the Zoom option is set to the widest setting.
c Use the arrow buttons on the projector or remote control to adjust the image position.
63 a b
Turn on the projector and display an image.
Adjust the image size using the Wide and Tele buttons.
After you adjust the image size, the Image Shift screen is displayed automatically.
a You can shift the image diagonally by pressing any pair of adjacent arrow buttons on the control panel or remote control.
d Press the [Esc] button to close the adjustment screen.
The adjustment screen disappears if no operation is performed after approximately 10 seconds.
a • The Image Shift setting is retained even if the projector is turned off.
You need to re-adjust the position if you change the installation location or angle of the projector.
• You can also use the Settings menu to adjust the Image Shift setting.
Selecting an Image Source
When multiple image sources are connected to the projector, such as a computer and DVD player, you can switch from one image source to the other.
a Make sure the connected image source you want to use is turned on.
b For video image sources, insert a DVD or other video media and press play.
c Do one of the following:
• Press the [Source Search] button on the control panel or remote control until you see the image from the source you want.
a This screen is displayed when no image signal is detected.
Check the cable connections between the projector and image source.
64
• Press the button for the source you want on the remote control. If there is more than one port for that source, press the button again to cycle through the sources.
A
Computer port source (Computer1 and Computer2 ports)
B
Video, HDMI, and MHL sources (Video, HDMI1/MHL, HDMI2 and
HDMI3 ports)
C
USB port sources (USB-B port and external devices connected to the
USB-A ports)
Selecting an Image Source
D
Network source (LAN)
• Press the [Home] button on the control panel or remote control.
Then select the source you want to use from the screen displayed.
65
Image Aspect Ratio
The projector can display images in different width-to-height ratios called aspect ratios. Normally, the input signal from your video source determines the image's aspect ratio. However, for certain images you can change the aspect ratio to fit your screen.
If you always want to use a particular aspect ratio for a certain video input source, you can select it using the projector's Signal menu.
g Related Links
• "Changing the Image Aspect Ratio" p.66
• "Available Image Aspect Ratios" p.66
• "Projected Image Appearance with Each Aspect Mode" p.67
• "Input Signal Settings - Signal Menu" p.173
Changing the Image Aspect Ratio
You can change the aspect ratio of the displayed image.
a b
Turn on the projector and switch to the image source you want to use.
Press the [Aspect] button on the remote control.
c To cycle through the available aspect ratios for your input signal, press the [Aspect] button repeatedly.
a To display images without black bars, set Resolution to Wide or
Normal in the projector’s Signal menu according to the computer’s resolution.
g Related Links
• "Input Signal Settings - Signal Menu" p.173
Available Image Aspect Ratios
You can select the following image aspect ratios, depending on the input signal from your image source.
a • Black bands and cropped images may project in certain aspect ratios, depending on the aspect ratio and resolution of your input signal.
• The Auto aspect ratio setting is available only for HDMI image sources.
• Note that using the aspect ratio function of the projector to reduce, enlarge, or split the projected image for commercial purposes or for public viewing may infringe upon the rights of the copyright holder of that image based on copyright law.
For projectors with a resolution of WXGA (1280 × 800)
Aspect mode
Auto
Normal
16:9
Full
Zoom
Description
Automatically sets the aspect ratio according to the input signal and the Resolution setting.
Displays images using the full projection area and maintains the aspect ratio of the image.
Converts the aspect ratio of the image to 16:9.
Displays images using the full size of the projection area, but does not maintain the aspect ratio.
Displays images using the full width of the projection area and maintains the aspect ratio of the image.
66
Image Aspect Ratio
Aspect mode
Native
Description
Displays images as is (aspect ratio and resolution are maintained).
For projectors with a resolution of XGA (1024 × 768)
Aspect mode
Auto
Normal
4:3
16:9
Description
Automatically sets the aspect ratio according to the input signal and the Resolution setting.
Displays images using the full projection area and maintains the aspect ratio of the image.
Converts the aspect ratio of the image to 4:3.
Converts the aspect ratio of the image to 16:9.
Projected Image Appearance with Each Aspect Mode
Black bands and cropped images may project in certain aspect ratios, depending on the aspect ratio and resolution of your input signal. See the following table to confirm the position of black bands and cropped images.
a The image for Native varies depending on the input signal.
For projectors with a resolution of WXGA (1280 × 800)
Aspect mode Aspect ratio for input signals
16:10 16:9
Normal
Auto
4:3
16:9
Aspect mode
Full
Zoom
Native
Aspect ratio for input signals
16:10 16:9 4:3
For projectors with a resolution of XGA (1024 × 768)
Aspect mode Aspect ratio for input signals
16:10 16:9
Normal
Auto
4:3
4:3
16:9
67
Color Mode
The projector offers different color modes to provide optimum brightness, contrast, and color for a variety of viewing environments and image types.
You can select the mode designed to match your image and environment, or experiment with the available modes.
g Related Links
• "Changing the Color Mode" p.68
• "Available Color Modes" p.68
Changing the Color Mode
You can change the projector's Color Mode using the remote control to optimize the image for your viewing environment.
a Turn on the projector and switch to the image source you want to use.
b Press the [Color Mode] button on the remote control to change the
Color Mode.
The name of the Color Mode appears briefly on the screen and then image appearance changes.
c To cycle through all of the available color modes for your input signal, press the [Color Mode] button repeatedly.
68 a You can also set the Color Mode setting in the projector's Image menu.
g Related Links
• "Image Quality Settings - Image Menu" p.171
Available Color Modes
You can set the projector to use these color modes, depending on the input source you are using:
Color mode
Presentation
Dynamic
Cinema sRGB
Blackboard
Description
Best for color presentations and television images in a bright room, with vivid images in sharp contrast.
Best for projecting in a bright room. This is the brightest mode.
Best for movies projected in a dark room with natural tone images.
Best for still images projected in a bright room that conform to the sRGB color standard.
Best for presentations onto a green chalkboard
(adjusts the colors accordingly).
Setting Auto Iris
You can turn on Auto Iris to automatically optimize the image based on the brightness of the content.
This setting is available for Dynamic or Cinema color modes.
a Turn on the projector and switch to the image source you want to use.
Color Mode b Press the [Menu] button on the control panel or remote control.
d Select Auto Iris and press [Enter].
c Select the Image menu and press [Enter].
e Choose one of the following options and press [Enter]:
• High Speed to adjust brightness as soon as the scene changes.
• Normal for standard brightness adjustment.
f Press [Menu] or [Esc] to exit the menus.
69
Adjusting the Image Color
You can fine-tune various aspects of how colors are displayed in your projected images.
g Related Links
• "Adjusting the Hue, Saturation, and Brightness" p.70
Adjusting the Hue, Saturation, and Brightness
You can adjust the Hue, Saturation, and Brightness settings for individual image colors.
a Turn on the projector and switch to the image source you want to use.
b Press the [Menu] button on the control panel or remote control.
c Select the Image menu and press [Enter].
d Select Advanced and press [Enter].
e Select RGBCMY and press [Enter].
f Do the following as necessary for each R (red), G (green), B (blue), C
(cyan), M (magenta) and Y (yellow):
• To adjust the overall hue of the color, bluish - greenish - reddish, adjust the Hue setting.
• To adjust the overall vividness of the color, adjust the Saturation setting.
70
Adjusting the Image Color
• To adjust the overall color brightness of the color, adjust the
Brightness setting.
g Press [Menu] or [Esc] to exit the menus.
71
Controlling the Volume with the Volume Buttons
The volume buttons control the projector's internal speaker system.
You can also control the volume of any external speakers you connected to the projector.
You must adjust the volume separately for each connected input source.
a Turn on the projector and start a presentation.
b To lower or raise the volume, press the [Volume] buttons on the remote control as shown.
A volume gauge appears on the screen.
c To set the volume to a specific level for an input source, select Volume in the projector's Settings menu.
Caution
Do not start a presentation at a high volume setting. Sudden loud noises may cause hearing loss.
Always lower the volume before powering off, so that you can power on and then gradually increase the volume.
g Related Links
• "Projector Feature Settings - Settings Menu" p.175
72
Using the Interactive Features
Follow the instructions in these sections to use the interactive features.
g Related Links
• "Interactive Feature Modes" p.74
• "Preparing Before Using Interactive Features" p.75
• "Drawing on a Projected Image (Annotation Mode)" p.86
• "Using the Projected Screen as a Whiteboard (Whiteboard Mode)" p.88
• "Control Computer Features from a Projected Screen (Computer Interactive Mode)" p.90
• "Interacting with the Screen" p.96
• "Using the Interactive Features over a Network" p.103
• "Windows Pen Input and Ink Tools" p.104
• "Interactive Features when Projecting Two Images Simultaneously" p.106
• "Interactive Features when Projecting with Two Projectors" p.109
Interactive Feature Modes
You can perform the following operations with the interactive features.
a • The interactive features are only available for EB-695Wi/EB-
685Wi/EB-680Wi/EB-675Wi.
• Touch operations with your finger are only available for EB-
695Wi/EB-680Wi.
• In whiteboard mode, you can use interactive pens or your finger to write on the projected "whiteboard".
74
This helps you emphasize projected information or include additional notes for more effective lessons or presentations. You can also save and print the projected screen with your annotation.
• In computer interactive mode, you can use interactive pens or your finger as you would use a mouse. This allows you to navigate, select, and scroll through content projected from your computer.
You do not need to use a computer or install any additional software to use the built-in whiteboard drawing feature. This is useful in meetings as a substitute for a whiteboard. You can also save and print the drawn content.
• In annotation mode, you can use interactive pens or your finger to add notes to content projected from a computer, tablet, document camera, or other source.
a You can also use the Easy Interactive Tools software to provide additional interactive features, such as saving and printing your annotations. See the Easy Interactive Tools Operation Guide built into the software for instructions.
g Related Links
• "Control Computer Features from a Projected Screen (Computer Interactive
• "Drawing on a Projected Image (Annotation Mode)" p.86
• "Using the Projected Screen as a Whiteboard (Whiteboard Mode)" p.88
Preparing Before Using Interactive Features
This section provides safety instructions on setting up and using the interactive pens or performing touch operations with your finger. Read these instructions before using the interactive features.
g Related Links
• "Safety Instructions for Interactive Features" p.75
• "Using the Interactive Pens" p.75
• "Using Interactive Touch Operations with Your Finger" p.80
Safety Instructions for Interactive Features
The interactive feature operates by infrared communication. Note the following important points when using this feature.
• Make sure there is no strong light or sunlight shining on the interactive pen receiver and the projection screen.
• If there is any dust stuck to the interactive pen receiver, it could interfere with infrared communication and you may not be able to use the features normally. Clean the receiver if it is dirty.
• Do not put paint or any stickers on the cover of the interactive pen receiver.
• Do not use an infrared remote control or infrared microphone in the same room because the interactive pen may malfunction.
• Do not use devices that generate powerful noise, such as rotary devices or transformers, near the projector. You may not be able to operate the interactive features.
g Related Links
• "Maintaining the Projector" p.199
Using the Interactive Pens
Your projector comes with a blue pen and an orange pen, identified by the color on the end of the pen. You can use either pen, or both at the same time
(one of each color).
Make sure the pen batteries are installed.
75
A
Pen tip
B
Battery indicator
C
Button
D
Strap attachment point
E
Battery cover
Hold the pen to turn it on.
When you are finished using the pen, leave the pen as it is far from the projection screen.
Attention
• Do not use interactive pens with wet hands or in locations where the pens may get wet. The interactive pens are not waterproof.
• Keep the projector and projection screen out of direct sunlight, or the interactive features may not work.
Preparing Before Using Interactive Features a • Pens turns off automatically after 15 seconds when they are placed on. Hold the pen to turn it back on.
• For best performance, hold the pen perpendicular to the board, as shown below. Do not cover the black band near the tip of the pen.
76
• To switch the pen operation from a drawing tool to an eraser or other functions selected in the projector's Extended menu, press the button on the side.
s
Extended > Easy Interactive Function > General > Advanced > Pen
Button Function
• Use the pen as a mouse in computer interactive mode.
You can do the following using the pen:
• Write or draw on the projection surface in whiteboard mode and annotation mode.
• To select a projected item, such as an icon, tap the projection surface with the pen tip.
• To draw on the projected screen, tap the projection surface with the pen and drag it as necessary.
• To move the projected pointer, hover over the surface without touching it.
• To left-click, tap the board with the pen tip.
• To double-click, tap twice with the pen tip.
• To right-click, press the button on the side.
• To click and drag, tap and drag with the pen.
• To move the cursor, hover over the board without touching it.
a • If you do not want to use the hovering feature, you can turn it off using the Hovering setting in the projector's Extended menu.
s Extended > Easy Interactive Function > Hovering
• To make a long press of the pen act as a right-click, select the following settings in the projector's Extended menu.
• Set the Pen Operation Mode setting to Ubuntu Mode.
s Extended > Easy Interactive Function > Pen Operation
Mode
• Set the Enable Right Click setting to On.
s Extended > Easy Interactive Function > Enable Right Click g Related Links
Preparing Before Using Interactive Features
• "Calibrating Automatically" p.77
• "Projector Parts - Interactive Pens" p.19
Pen Calibration
Calibration coordinates the positioning of the pen with the location of your cursor. You only need to calibrate the first time you use your projector.
You can use Auto Calibration to calibrate the system, but Manual
Calibration is also available for finer adjustments or if Auto Calibration failed.
a • Move any pen you are not using away from the projection screen while calibrating the system.
• Calibrate the system again if you notice any discrepancy in positioning after doing any of the following:
• Performing Geometry Correction
• Adjusting the image size
• Using the Image Shift feature
• Changing the projector position
• The calibration results remain until you recalibrate.
Calibrating Automatically
You need to calibrate the first time you use your projector, and you do not need the pens or a computer for Auto Calibration.
a You can also start Auto Calibration by pressing the [User] button on the remote control.
a Press the [Menu] button, select the Extended menu, and press the
[Enter] button.
b Select the Easy Interactive Function setting and press the [Enter] button.
77
Preparing Before Using Interactive Features c Select Auto Calibration and press the [Enter] button.
A pattern appears then disappears, and the system is calibrated. If you see a message that calibration failed, you need to calibrate manually.
The cursor location and pen position should match after calibration. If not, you may need to calibrate manually.
Calibrating Manually
If the cursor location and pen position do not match after auto calibration, you can calibrate manually.
Make sure to perform the manual calibration when you project images on a curved surface.
a Press the [Menu] button, select the Extended menu, and press the
[Enter] button.
78
The following screen appears.
d Adjust the focus, if necessary, by opening the air filter cover on the side of the projector and sliding the focus lever.
e Select Yes and press the [Enter] button.
Preparing Before Using Interactive Features b Select the Easy Interactive Function setting and press the [Enter] button.
The following screen appears.
79 c Select Manual Calibration and press the [Enter] button.
d Adjust the focus, if necessary, by opening the air filter cover on the side of the projector and sliding the focus lever.
e Select Yes and press the [Enter] button.
A flashing green circle appears in the upper left corner of your projected image.
f Touch the center of the circle with the tip of the pen.
Preparing Before Using Interactive Features
The circle disappears, and you see another circle below the first one.
g Touch the center of the next circle, then repeat. When you get to the bottom of the column, the next circle appears at the top of a new column.
80 a For the most accurate calibration, make sure you touch the center of the circle.
a • Make sure you are not blocking the signal between the pen and the interactive receiver.
• If you make a mistake, press the [Esc] button on the remote control to go back to the previous circle.
• To cancel the calibration process, press and hold the [Esc] button for 2 seconds.
h Continue until all of the circles disappear.
Using Interactive Touch Operations with Your Finger
You can use your finger to interact with the projected screen, just as you would use an interactive pen (EB-695Wi/EB-680Wi). You can use either a pen or your finger, or use both at the same time.
Preparing Before Using Interactive Features
The projector recognizes up to six touch points in computer interactive mode.
When performing touch operations with your finger, you can use two fingers in annotation and whiteboard modes.
Do the following before using your finger for touch operations:
• Install the Touch Unit
• Calibrate the system manually for the pen
• Perform angle adjustment for the Touch Unit
• Calibrate the system for touch operations
See the Installation Guide for details.
The Touch Unit turns on and is ready for touch operation with your finger when you turn on the projector and the indicator lights up in blue.
a • Check the following if the Touch Unit does not turn on.
• The Power setting in the Touch Unit Setup menu is set to On.
s Extended > Easy Interactive Function > Touch Unit Setup >
Power
• The Touch Unit is connected to the projector's TCH port with a
Touch Unit connection cable.
• Positioning discrepancies may occur depending on the angle of your finger or the direction you point.
• Touch operations with your finger may not work properly with long or artificial nails, or with your fingers wrapped in bandages.
• Touch operations may not be recognized correctly if your fingers or the pens are too close together or crossed.
• If clothing or another part of your body comes close to or touches the screen, the touch operations may work incorrectly.
• If you touch the screen with your free hand during touch operations, the touch operations may work incorrectly.
You can perform the following touch operations with your finger:
• Use your finger as a mouse in computer interactive mode.
81
• To left-click, tap the board with your finger.
• To double-click, tap twice with your finger.
• To click and drag, press on and drag an item with your finger.
Preparing Before Using Interactive Features a • If your device supports these functions, you can also do the following:
• To zoom in or out, touch an item using two fingers, and either move your fingers away from each other (stretch to zoom in) or toward each other (pinch to zoom out).
• To rotate the image, touch the image using two fingers and then rotate your hand.
• To scroll up or down the page, or move backward or forward in a browser window, use gestures such as flicks.
• You can only use one tool with one finger at a time.
• Write or draw on the projection surface in annotation mode and whiteboard mode.
• To select a projected item, such as an icon, tap the projection surface with your finger.
• To draw on the projected screen for the first time after turning on the projector, select a pen in the toolbar and tap the projection surface with your finger. If you do not do this, your finger works as an eraser the first time you use touch operations.
g Related Links
• "Calibrating for Touch Operations with Your Finger" p.82
• "Safety Instructions for Interactive Touch Operations" p.84
Calibrating for Touch Operations with Your Finger
Calibration coordinates the positioning of your finger with the location of your cursor (EB-695Wi/EB-680Wi). If the cursor location and your finger position do not match, you need to calibrate again.
a • The positioning of your finger is usually adjusted when the Touch
Unit is installed. See the Installation Guide for details.
• Make sure you have calibrated the system for the pen using Auto
Calibration or Manual Calibration before calibrating for touch operations with your finger.
• Calibrate for touch operations with your finger again if you notice any discrepancy in positioning after doing any of the following:
• Calibrating the system for use with the pen (automatically or manually)
• Performing angle adjustments for the Touch Unit
• Performing Geometry Correction
• Adjusting the image size
• Using the Image Shift feature
• Changing the projector position a Press the [Menu] button, select the Extended menu, and then press
[Enter].
82
Preparing Before Using Interactive Features b Select the Easy Interactive Function setting and press [Enter].
d Select Touch Calibration and press the [Enter] button.
83 c Select Touch Unit Setup and press the [Enter] button.
The following screen appears.
e Adjust the focus, if necessary, by opening the air filter cover on the side of the projector and sliding the focus lever.
f Select Yes and press the [Enter] button.
Preparing Before Using Interactive Features
A flashing green circle appears in the upper left corner of your projected image.
g Touch and hold the center of the circle with your finger until the circle disappears and the another circle appears, then release it.
84 h Touch the center of the next circle with your finger, then repeat. When you get to the bottom of the column, the next circle appears at the top of a new column.
a • For the most accurate calibration, make sure you touch the center of the circle.
• Do not touch the circle with anything except the tip of your finger.
a • Make sure you are not blocking the signal between your finger and the interactive receiver.
• If you touch the wrong position, press the [Esc] button on the remote control or control panel.
• To cancel touch calibration, hold down the [Esc] button for two seconds.
i Continue until all of the circles disappear.
Safety Instructions for Interactive Touch Operations
Touch operation with your finger is enabled by installing the Touch Unit with a built-in high-power laser (EB-695Wi/EB-680Wi).
Preparing Before Using Interactive Features
The laser radiates from the laser diffusion ports on rear of the Touch Unit:
85
The labels indicating the Class 1 laser product and warnings are placed in the following places on the Touch Unit:
Note the following important points when performing touch operations.
Warning
• Never open any cases on the projector or the Touch Unit. Never attempt to disassemble or modify the projector or the Touch Unit. Electrical voltages inside the projector can cause severe injury.
• Unplug the projector from the outlet and refer all repairs to qualified service personnel if any problems occur with the projector or the Touch Unit.
Continued use of the Touch Unit may result in fire or accidents, and can also damage your eyes.
Laser Warning Labels
The Touch Unit is a Class 1 laser product that complies with IEC/EN60825-
1:2007.
The labels indicate the following:
• CLASS 1 LASER PRODUCT
• WARNING: Never open any covers on this unit. Laser product inside.
• WARNING:
• CAUTION: CLASS 3B INVISIBLE LASER RADIATION WHEN OPEN
• AVOID EXPOSURE TO THE BEAM
Drawing on a Projected Image (Annotation Mode)
You see the toolbar on the projected image, for example:
86
Annotation mode lets you project from a computer, tablet, video device, or other source and add notes to your projected content using the interactive pens or your finger (EB-695Wi/EB-680Wi).
a • You can use two pens at the same time.
• You can use two pens and two fingers at the same time (EB-
695Wi/EB-680Wi).
• Make sure you perform calibration first.
a Project an image from a connected device.
b Hold an interactive pen close to the projected screen or tap the projected screen using your finger.
c To write or draw, tap the or toolbar tab.
A
Drawing toolbar
B
Bottom toolbar
When the toolbars are displayed, you can write on the projected screen using the interactive pen or your finger (EB-695Wi/EB-680Wi).
The drawing toolbar provides drawing tools such as a pen and eraser.
The bottom toolbar provides additional tools, such as tools for controlling the projector or saving the projected screen.
a • You can also control the projector from the projected screen by using the bottom toolbar displayed on the screen. Tap the toolbar tab if the bottom toolbar is not displayed.
• You can move the and the and toolbar tabs up and down, toolbar tab right and left.
Drawing on a Projected Image (Annotation Mode) g Related Links
• "Annotation Mode and Whiteboard Mode Toolbars" p.96
• "Bottom Toolbar for Projector Control" p.99
87
Using the Projected Screen as a Whiteboard (Whiteboard Mode)
You see the whiteboard screen and toolbar, for example:
88
You can use the interactive pens or your finger (EB-695Wi/EB-680Wi) to write or draw on the projection surface just as you would on a chalkboard or dry erase board.
a • You can use two pens at the same time.
• You can use two pens and two fingers at the same time (EB-
695Wi/EB-680Wi).
• Make sure you perform calibration first.
a Hold an interactive pen close to the projected screen or tap the projected screen using your finger.
b Tap the or toolbar tab.
The toolbar is displayed.
c Tap the icon on the toolbar.
A
Drawing toolbar
B
Bottom toolbar
When the toolbars are displayed, you can write on the projected screen using the interactive pen or your finger (EB-695Wi/EB-680Wi).
The drawing toolbar provides drawing tools such as a pen and eraser.
The bottom toolbar provides additional tools, such as tools for controlling the projector or saving the projected screen.
a • You can also control the projector from the projected screen by using the bottom toolbar displayed on the screen. Tap the toolbar tab if the bottom toolbar is not displayed.
• You can move the and the and toolbar tabs up and down, toolbar tab right and left.
Using the Projected Screen as a Whiteboard (Whiteboard Mode) a You can also use the Easy Interactive Tools software to provide additional interactive features, such as treating the drawing area as a page, and creating multiple pages to draw on. See the Easy Interactive
Tools Operation Guide for instructions.
g Related Links
• "Annotation Mode and Whiteboard Mode Toolbars" p.96
• "Bottom Toolbar for Projector Control" p.99
89
Control Computer Features from a Projected Screen (Computer Interactive Mode)
When the projector is connected to a computer with a USB cable, you can operate the computer from the projected screen using the interactive pens or your finger (EB-695Wi/EB-680Wi), just as you would with a mouse. You can navigate, select, and interact with your computer programs from the projected screen.
a • When you use multiple displays with Windows 7 or later and use computer interactive mode on the secondary display, make the following settings:
• Set the Pen Operation Mode setting to Windows/Mac Mode in the Easy Interactive Function setting in the projector's Extended menu.
• Go to Control Panel > Hardware and Sound > Table PC Settings
> Setup to launch the setup program and configure the interactive features.
If you set up a third display, you cannot use interactive features with that display.
You cannot write or draw across multiple screens.
• To use computer interactive mode over a network, you need to install EasyMP Multi PC Projection version 2.10 or later (for
Windows and OS X).
g Related Links
• "Computer Interactive Mode System Requirements" p.90
• "Using Computer Interactive Mode" p.91
• "Adjusting the Pen Operation Area" p.93
• "Installing Easy Interactive Driver on OS X" p.95
Computer Interactive Mode System Requirements
Your computer must use one of the following operating systems to use the computer interactive mode.
90
Control Computer Features from a Projected Screen (Computer Interactive Mode)
Windows
Mac
Windows Vista Service Pack 2
• Ultimate (32-bit)
• Enterprise (32-bit)
• Business (32-bit)
• Home Premium (32-bit)
• Home Basic (32-bit)
Windows 7 Service Pack 1
• Ultimate (32- and 64-bit)
• Enterprise (32- and 64-bit)
• Professional (32- and 64-bit)
• Home Premium (32- and 64-bit)
Windows 8
• Windows 8 (32- and 64-bit)
• Windows 8 Pro (32- and 64-bit)
• Windows 8 Enterprise (32- and 64-bit)
Windows 8.1
• Windows 8.1 (32- and 64-bit)
• Windows 8.1 Pro (32- and 64-bit)
• Windows 8.1 Enterprise (32- and 64-bit)
Windows 10
• Windows 10 Home (32- and 64-bit)
• Windows 10 Pro (32- and 64-bit)
OS X
• OS X 10.7.x
• OS X 10.8.x
• OS X 10.9.x
• OS X 10.10.x
• OS X 10.11.x
Ubuntu
Ubuntu
• 14.10
• 15.04
• 15.10
• 16.04 LTS
Using Computer Interactive Mode
You can control your computer programs from the projected screen using computer interactive mode.
a If you are using OS X, install the Easy Interactive Driver on your computer the first time you use the interactive features.
b Connect the projector to your computer using a USB cable.
a • When using computer interactive mode over a network, you do not need a USB cable.
c Turn on the projector.
d Project your computer screen.
91
Control Computer Features from a Projected Screen (Computer Interactive Mode) e Press the [Menu] button, select the Extended menu, and then press
[Enter].
• To use computer interactive mode and USB Display at the same time, select USB Display/Easy Interactive Function.
a • When projecting using USB Display, response time may be slower.
• Using two interactive pens at the same time may cause interference in some applications. Move the unused interactive pen away from the projection screen.
• Select the Pen Operation Mode setting in the Easy Interactive
Function setting in the projector's Extended menu according to the operating system of the connected computer.
s Extended > Easy Interactive Function > Pen Operation
Mode
92 f Select the USB Type B setting, and then press the [Enter] button.
g Select one of the following:
• To use computer interactive mode with a computer cable, an HDMI cable, or over a network, select Easy Interactive Function.
h Press the [Menu] button to exit the menus.
i Make sure you have calibrated the first time you use your projector.
j Hold an interactive pen close to the projected screen, or touch the projected screen with your finger.
The icon is displayed on the projected screen.
Control Computer Features from a Projected Screen (Computer Interactive Mode) a
• The icon is displayed on the right the first time. Next time, it is displayed on the side from which you last opened the toolbar.
• If the icon is not displayed, set the Pen Mode Icon setting to On in the projector's Extended menu.
s Extended > Display > Pen Mode Icon k Select the icon, and then select the icon.
a You can also change to computer interactive mode by doing the following:
• Pressing the [Pen Mode] button on the remote control.
• Changing the Pen Mode setting on the projector's Extended menu to PC Interactive.
s Extended > Easy Interactive Function > Pen Mode
You can now operate the computer using the interactive pen or your finger.
You can also operate the following:
• The Tablet PC input panel in Windows 7 or Windows Vista.
• Ink Tools for annotation in Microsoft Office applications.
g Related Links
• "Windows Pen Input and Ink Tools" p.104
• "Easy Interactive Driver System Requirements" p.246
• "Installing Easy Interactive Driver on OS X" p.95
93
• "Using the Interactive Features over a Network" p.103
• "Calibrating for Touch Operations with Your Finger" p.82
Adjusting the Pen Operation Area
The pen operation area is normally adjusted automatically if you connect a different computer or adjust the computer's resolution. If you notice that the pen position is incorrect when you operate your computer from the projected screen (computer interactive mode), you can adjust the pen area manually.
a Manual adjustment is not available when projecting from a LAN source.
a Switch to computer interactive mode, if necessary.
b Press the [Menu] button, select the Extended menu, and then press
[Enter].
Control Computer Features from a Projected Screen (Computer Interactive Mode) c Select the Easy Interactive Function setting and press [Enter].
e Select Manual Adj. Pen Area and press the [Enter] button.
94 d In the PC Interactive section, select Advanced, and then press [Enter].
a When Auto Adjust Pen Area is set to On, change to Off.
f Select Yes and press the [Enter] button.
The mouse pointer moves toward the top left corner.
g When the mouse pointer stops at the top left corner of the image, touch the tip of the pointer with the pen.
The mouse pointer moves toward the bottom right corner.
Control Computer Features from a Projected Screen (Computer Interactive Mode) h When the mouse pointer stops at the bottom right corner of the image, touch the tip of the pointer with the pen.
g Related Links
• "Using Computer Interactive Mode" p.91
Installing Easy Interactive Driver on OS X
Install Easy Interactive Driver on your computer to use computer interactive mode.
a You may have already installed Easy Interactive Tools using the Easy
Install option, which also installs Easy Interactive Driver. See the Easy
Interactive Tools Operation Guide in the Document CD-ROM for details.
a Turn on your computer.
b Insert the EPSON Projector Software for Easy Interactive Function CD into the computer.
You see the EPSON window.
c Double-click the Install Navi icon in the EPSON window.
d Select Custom Install.
e Follow the on-screen instructions to install the software.
f Restart your computer.
95
Interacting with the Screen
Follow these instructions to interact with the projected image or control the projector.
g Related Links
• "Switching the Interactive Mode" p.96
• "Annotation Mode and Whiteboard Mode Toolbars" p.96
• "Bottom Toolbar for Projector Control" p.99
• "Easy Interactive Driver System Requirements" p.246
Switching the Interactive Mode
You can easily switch the interactive mode.
• To switch between computer interactive mode and annotation mode, select one of the following icons:
• To change from annotation mode to computer interactive mode:
• To change from computer interactive mode to annotation mode:
• To switch between annotation mode and whiteboard mode, select the following icon in the toolbar.
a • You can also change the interactive mode by doing the following:
• Pressing the [Pen Mode] button on the remote control.
• Switching to PC Free Annotation or PC Interactive in the Pen
Mode setting on the projector's Extended menu.
s Extended > Easy Interactive Function > Pen Mode
• You cannot switch to computer interactive mode when the USB
Type B setting in the projector's Extended menu is set to Wireless
Mouse/USB Display.
• After changing to computer interactive mode, content drawn using annotation mode is retained.
Annotation Mode and Whiteboard Mode Toolbars
The annotation mode toolbar or the whiteboard mode toolbar lets you draw and write on the projected screen. The toolbar also lets you easily switch to annotation or whiteboard mode.
96
Interacting with the Screen
In the following illustration, the annotation mode toolbar is shown on the left, and the whiteboard mode toolbar on the right:
Switches to annotation mode.
Switches to whiteboard mode.
Undoes the last operation.
Redoes the last undo.
Switches to the computer interactive mode.
Selects a white or black background or one of four patterns.
Writes or draws free-form lines with custom pen.
Select the icon to change custom pen color and width.
Writes or draws free-form lines with a transparent highlighter pen.
Select the icon to change highlighter pen color and width.
Black pen (fine point on left, thick on right).
Red pen (fine point on left, thick on right).
Blue pen (fine point on left, thick on right).
Eraser (thin width on left, thick on right).
97
Interacting with the Screen
Clears all drawings.
Hides or shows the toolbar while drawing.
: The toolbar is hidden while drawing.
: The toolbar is always displayed.
Closes the toolbar.
Displays which tool you are using with your pen
(EB-695Wi/EB-680Wi).
or finger
: Using pen tools. The color of the icon indicates the color of the pen.
: Using eraser tools.
: Using your pen or finger as a mouse.
g Related Links
• "Selecting Line Width and Color" p.98
• "Selecting Whiteboard Templates" p.99
Selecting Line Width and Color
You can select the color and line width for both the custom Pen and the
Highlighter tools.
a Select the icon next to the custom Pen or Highlighter annotation tool.
A box like the following appears: b Select the line width and color you want to use for the Pen or
Highlighter tools.
a • As you hover over the color palette, the name of the color is displayed.
• You can change the shade of the color palette using the Color
Palette setting in the projector's Extended menu.
s Extended > Easy Interactive Function > General >
Advanced > Color Palette c Select the or tool, then use the pen or your finger (EB-
695Wi/EB-680Wi) to write or draw on the projection surface.
98
Interacting with the Screen a When multiple people draw on the projected screen using the multiple pens, you can select different colors and line widths for each pen.
When using touch operations, all users share the same color and line width.
Selecting Whiteboard Templates
In whiteboard mode, you can change the background color, and insert horizontal lines or a background template.
a In whiteboard mode, select the
The following box appears.
icon.
b Select one of the template patterns.
Bottom Toolbar for Projector Control
The bottom toolbar allows you to save, print your pages, or control the various projector features.
Displays the Home screen.
Prints the projected screen.
a You cannot print content that is protected by
HDCP.
Saves the projected screen to the connected USB storage device.
a You cannot save content that is protected by
HDCP.
Shares the current screen using EasyMP Multi PC Projection or
Epson iProjection.
a You cannot share screen that is protected by
HDCP.
Changes the image source using the displayed list. To close the image source list, select the icon at the top of the list.
Enlarges or reduces the projected image.
Turns the video and audio off. Touch the screen to turn the video and audio back on.
Pauses video action.
99
Interacting with the Screen
Increases or decreases the volume.
Splits the screen to project two images at once. While performing the split screen projection, select this icon to make detailed settings to use the interactive features in the split screen projection.
Counts the time up or down.
Displays the toolbar to control the document camera.
You can also use these features.
a Available features vary depending on your
Epson document camera model.
: Focus the document camera's image automatically.
: Pause the document camera's video action.
: Zoom in and out of the document camera's images.
: Rotate the document camera's image by 180 degrees.
: Capture the document camera's still images.
: Start and stop the document camera's video recording.
: Play the document camera's movie.
: Close the document camera's toolbar.
Turns off the projector.
Closes the bottom toolbar.
g Related Links
• "Saving Drawing Content" p.100
• "Printing Drawing Content" p.100
• "Selecting Network Device Display" p.101
Saving Drawing Content
You can save drawing content you created on the projected screen to a USB storage device. You can save in JPG format. An error occurs if you cannot access the USB storage device. The file name is set automatically.
a USB storage devices with password protection are not supported.
a Connect a USB storage device to the projector's USB-A port.
b Select the icon on the bottom toolbar.
Select Yes to save the drawing content.
Printing Drawing Content
You can print the drawing content you created using the printer settings in
Printer Settings from the projector's Network menu. An error occurs if a printer is not connected.
The following printer control commands are supported.*
100
Interacting with the Screen
Control commands
ESC/P-R
ESC/Page, ESC/Page-Color
PCL6
Connection method
Over a network
* Not all printers are supported. For more details on supported models, contact Epson for help.
a Select the icon on the bottom toolbar.
The Print screen is displayed.
b c
Specify the number of copies on the Print screen (up to 20 sheets).
Select Print.
Selecting Network Device Display
If you have connected devices to the projector via a network, you can select to project an image from those devices. You can select the image source from computers that are running EasyMP Multi PC Projection, and smartphones or tablets that are running Epson iProjection.
a You can select any connected network device for projection, even if the user connected using the EasyMP Multi PC Projection software with the moderator feature enabled. See the EasyMP Multi PC Projection
Operation Guide for details about the moderator feature.
The user selection screen is displayed.
b Select the user name for the device you want to project from.
101 a Select the icon on the bottom toolbar, and then select Participant
List from the image source list.
A
Displays the user names for network devices connected to the projector.
The icon is shown next to the user name of the currently projected device (Only when displaying pages with icons).
B
Closes the user selection screen and returns to the previous screen.
C
Click to move to the previous page or the next page when displaying a thumbnail.
Interacting with the Screen
D
Switches the display for the user selection screen between thumbnails or icons.
E
Refreshes the user selection screen.
When an additional user connects to the projector via a network, select this button to update the user list.
a • While the user selection screen is displayed, you cannot do the following:
• Select a different image source
• Use other interactive features
• Control the projector from the bottom toolbar
• Connect to multiple projectors
• Hear sound from the projector (it is turned off temporarily)
• Project an image using EasyMP Multi PC Projection or
Epson iProjection
You see the selected user's screen image.
When you change the user, repeat these steps.
a • You cannot access the Participant List screen when connecting to multiple projectors by using EasyMP Multi PC Projection and projecting the same image (mirroring).
• If pen operations or touch operations do not work on the user selection screen, you can return to the previous screen by pressing the [Esc] button on the remote control or the control panel.
102
Using the Interactive Features over a Network
You can use your projector in computer interactive mode over a network.
If you want to annotate when using computer interactive mode over a network, you need to use Easy Interactive Tools (or another annotation program). Easy Interactive Tools allows you to use various drawing tools, treat the drawing area as a page, and save your drawings as a file for a later use. You can install Easy Interactive Tools from the EPSON Projector
Software for Easy Interactive Function CD. You can also download the software from the Epson website.
Use EasyMP Multi PC Projection version 2.10 or later (for Windows and OS
X) to setup your projector on a computer network and use computer interactive mode over the network.
Select Use Interactive Pen on the General settings tab and Transfer layered
window on the Adjust performance tab.
See the EasyMP Multi PC Projection Operation Guide for instructions.
a • Number of pens or fingers (EB-695Wi/EB-680Wi) you can use at the same time is as follows:
• Windows: two pens and six fingers
• OS X: one pen or one finger
• The response may be slower over the network.
• You cannot change the Pen Operation Mode setting from the projector's Extended menu.
• You can connect up to four projectors at one time using EasyMP
Multi PC Projection. When connected to multiple projectors, computer interactive mode functions for any projector. Operations performed on one projector are reflected in other projectors.
g Related Links
• "Precautions when Connecting to a Projector on a Different Subnet" p.103
103
Precautions when Connecting to a Projector on a
Different Subnet
Follow these precautions when you connect to a projector on a different subnet using EasyMP Multi PC Projection and use interactive features:
• Search for the projector on the network by specifying the projector's IP address. You cannot search for it by specifying the projector name.
• Make sure that you get an echo reply back from the network projector when sending an echo request by the ping command. When the Internet Control
Message Protocol (ICMP) option is disabled on the router, you can connect to the projector at remote locations even if you cannot get the echo reply back.
• Make sure the following ports are opened.
Port
3620
3621
3629
Protocol
TCP/UDP
TCP
TCP
Usage
For connection and control
Communication two-way
For transferring images two-way
For controlling projector two-way
• Make sure that the MAC address filtering and application filtering options are configured properly on the router.
• When bandwidth management is applied for communications between locations, and EasyMP Multi PC Projection goes over the controlled bandwidth, you may not be able to connect to the projector at remote locations.
a Epson does not guarantee the connection to the projector on a different subnet using EasyMP Multi PC Projection even if you meet the above requirements. When considering the implementation, be sure to test the connection in your network environment.
Windows Pen Input and Ink Tools
If you are using Windows 10, Windows 8.1, Windows 8, Windows 7, or
Windows Vista, you can use the pen input and Ink tools to add handwritten input and annotations to your work.
You can also use the pen input and Ink features over a network when you set the interactive features to be available on your network.
g Related Links
• "Enabling Windows Pen Input and Ink Features" p.104
• "Using Windows Pen Input and Ink Features" p.105
Enabling Windows Pen Input and Ink Features
If you want to use the pen input and Ink features in Windows 10, Windows
8.1, Windows 8, Windows 7, or Windows Vista, you need to adjust the pen settings in the projector's Extended menu.
a Press the [Menu] button, select the Extended menu, and press the
[Enter] button.
b Select the Easy Interactive Function setting and press the [Enter] button.
c Select the Pen Operation Mode setting and press the [Enter] button.
104 d Select Windows/Mac Mode and press [Enter].
Windows Pen Input and Ink Tools
Using Windows Pen Input and Ink Features
If you are using Windows 10, Windows 8.1, Windows 8, Windows 7, or
Windows Vista, you can add handwritten input and convert it to text.
If you have Microsoft Office 2007 or later, you can also use the Ink function to add handwritten notes to a Word document, Excel spreadsheet, or
PowerPoint presentation.
a Option names for the annotation functions may vary depending on your version of Microsoft Office.
• To open the Touch Keyboard in Windows 10, right-click or tap and hold on the Taskbar, then select Show touch keyboard button. Select the keyboard icon on the screen.
• To open the Touch Keyboard in Windows 8, right-click or tap and hold on the Taskbar, then select Toolbars > Touch Keyboard. Select the keyboard icon on the screen, then select the pen icon.
• To open the Tablet PC input panel in Windows 7 or Windows Vista, select
> All Programs > Accessories > Tablet PC > Tablet PC Input Panel.
You can write in the box using the pen or your finger (EB-695Wi/EB-
680Wi), then select from a variety of options to edit and convert the text.
• To add Ink annotations in Microsoft Office applications, select the Review menu, then select Start Inking.
a In Microsoft Word or Excel, select the Insert tab and then click on
Start Inking.
• To annotate your PowerPoint slides in Slideshow mode, press the button on the side of the pen or press the projection surface with your finger for about
3 seconds, then select Pointer Options > Pen from the pop-up menu.
For more information about these features, see your Windows Help.
105
Interactive Features when Projecting Two Images Simultaneously
You can simultaneously project images from two sources on the right and left of the screen, and use the interactive features.
You can write and draw across the screens.
b Select the input sources for the left and right screen.
106 a • You can only use computer interactive mode on one of the screens.
• You can display the area where you can write and draw with a frame.
When projecting two images simultaneously, press the [Menu] button and set the Display Drawing Area setting to On.
• The response time may be slower.
g Related Links
• "Switching Split Screen Projection" p.106
• "Selecting Split Screen Settings for the Interactive Feature" p.107
• "Projecting Two Images Simultaneously" p.112
Switching Split Screen Projection
You can split the screen to project two images simultaneously using the bottom toolbar or remote control. Follow the steps below to switch to the split screen projection using the bottom toolbar.
a Select the icon on the bottom toolbar.
a You can only select input sources that can be combined.
c Select Switch Source.
Interactive Features when Projecting Two Images Simultaneously
Selecting Split Screen Settings for the Interactive
Feature
Follow the steps below to select the split screen projection settings using the bottom toolbar.
a Select the icon on the bottom toolbar.
The split screen setup screen is displayed.
b Select the tab.
c Select the following split screen settings.
107
• Screen Size: enlarges one image while reducing the other image.
Depending on the video input signals, the images may not appear at the same size even if you select icon (Equal).
• Target Pen Mode: allows you to use the pen or your finger as a mouse on either screen.
• Audio Source: selects the audio. Select icon (Auto) to hear audio from the larger screen or the left screen.
Interactive Features when Projecting Two Images Simultaneously d Select the icon on the split screen setup screen to exit the screen.
108
Interactive Features when Projecting with Two Projectors
You can use your projector's interactive features while projecting with two projectors installed side by side. Install Easy Interactive Driver Ver. 4.0 from the Epson Projector Software for Easy Interactive Function CD-ROM.
109 a Press the [Home] button on the remote control or the bottom toolbar.
icon on the
The Home screen appears.
b Press the icon.
See the Installation Guide for detailed instructions on installing multiple projectors and making settings for the Interactive features.
a You may not be able to write and draw across the border of the images.
g Related Links
• "Using the Interactive Features Temporarily on Only One of the Projectors" p.109
• "Using Multiple Projectors" p.129
• "Easy Interactive Driver System Requirements" p.246
• "Connecting Multiple Projectors of the Same Model" p.35
Using the Interactive Features Temporarily on Only
One of the Projectors
When you are using the interactive features on a screen projected by two projectors, you can temporarily use the interactive features on only one of the projectors by selecting the following settings. This setting is only available on the Home screen.
Interactive Features when Projecting with Two Projectors c Select On for Use this single projector.
d Press Close to return to the previous screen.
You can now temporarily use the interactive features using only one of the projectors.
a When the projector turns off, the Use this single projector setting returns to Off.
110
Adjusting Projector Features
Follow the instructions in these sections to use your projector's adjustment features.
g Related Links
• "Projecting Two Images Simultaneously" p.112
• "Projecting a PC Free Presentation" p.115
• "Shutting Off the Image and Sound Temporarily" p.120
• "Stopping Video Action Temporarily" p.121
• "Using the Remote Control as a Wireless Mouse" p.123
• "Using the Remote Control as a Pointer" p.125
• "Saving a User's Logo Image" p.126
• "Saving a User Pattern" p.128
• "Using Multiple Projectors" p.129
• "Projecting Images from the HDMI3 Port with the Optional Interface Box" p.137
• "Projector Security Features" p.139
Projecting Two Images Simultaneously
You can use the split screen feature to simultaneously project two images from different image sources. You can control the split screen feature using the remote control or the projector menus.
a Press the [Split] button on the remote control.
The currently selected input source moves to the left of the screen.
a You can perform the same operations from Split Screen in the projector's Settings menu.
b Press the [Menu] button.
You see this screen:
112 a • While using the split screen feature, other projector features may not be available and some settings may be automatically applied to both images.
• You cannot perform split screen projection when Connect ELPCB02 is set to On in the projector's Extended menu.
s Extended > Operation > Connect ELPCB02
Projecting Two Images Simultaneously c To select an input source for the other image, select the Source setting, press [Enter], select the input source, select Execute, and press [Enter].
a • You can only select input sources that can be combined.
• While using the split screen feature, the Source screen appears when you change the input source from the remote control.
d To switch images, select Swap Screens and press [Enter].
The projected images on the left and right are swapped.
113 a Depending on the video input signals, the images may not appear at the same size even if you select Equal.
f To select the audio, select Audio Source, press [Enter], select an audio option, and press [Enter]. To exit the menu, press [Menu].
a Select Auto to hear audio from the largest screen or the left screen.
g To align the projected images to the top of the screen, select Align, press [Enter], select Top, and press [Enter] again. To exit the menu, press [Menu].
h To exit the split screen feature, press [Split] or [Esc].
g Related Links
• "Unsupported Input Source Combinations for Split Screen Projection" p.113
• "Split Screen Projection Restrictions" p.114
• "Interactive Features when Projecting Two Images Simultaneously" p.106
Unsupported Input Source Combinations for Split
Screen Projection
These input source combinations cannot be projected on a split screen.
• Computer1 and Computer2
• Computer1/Computer2 and Video
• USB Display and USB/LAN
• USB and LAN e To enlarge one image while reducing the other image, select Screen
Size, press [Enter], select a size, and press [Enter]. To exit the menu, press [Menu].
Projecting Two Images Simultaneously
Split Screen Projection Restrictions
Operating restrictions
The following operations cannot be performed during split screen projection.
• Setting the projector's menu
• E-Zoom
• Switching the aspect mode (the aspect mode is set to Normal)
• Operations using the [User] button on the remote control
• Auto Iris a Help can only be displayed when no image signals are being input or when an error or warning notification is displayed.
Image restrictions
• If you make adjustments such as Brightness, Contrast, Color Saturation,
Tint, and Sharpness in the projector's Image menu, you can apply them only to the image on the left. Default adjustments are applied to the image on the right. Adjustments that affect the entire projected image such as
Color Mode and Color Temp. are applied for both left and right images.
• Even if you make adjustments for Noise Reduction and Deinterlacing in the projector's Image menu, Noise Reduction is set to 0 and Deinterlacing is set to Off for the image on the right.
s
Image > Image Enhancement > Noise Reduction s
Image > Advanced > Deinterlacing
• Even if you set Display Background to Logo in the projector's Extended menu, the blue screen appears when no image signal is being input.
g Related Links
• "Input Signal Settings - Signal Menu" p.173
• "Projector Feature Settings - Settings Menu" p.175
• "Projector Setup Settings - Extended Menu" p.178
114
Projecting a PC Free Presentation
You can use your projector's PC Free feature whenever you connect a USB device that contains compatible presentation files. This lets you quickly and easily display a presentation and control it using the projector's remote control.
g Related Links
• "Supported PC Free File Types" p.115
• "Precautions on PC Free Projection" p.115
• "Starting a PC Free Slide Show" p.116
• "Starting a PC Free Movie Presentation" p.117
• "PC Free Display Options" p.119
Supported PC Free File Types
You can project these types of files using the projector's PC Free feature.
a • For best results, place your files on media that is formatted in
FAT16/32.
• If you have trouble projecting from media formatted for non-
Windows file systems, try formatting the media for Windows instead.
115
File contents File type
(extension)
Image .jpg
Movie
.bmp
.gif
.png
.avi
(Motion
JPEG)
Details
Make sure the file is not:
• CMYK format
• Progressive format
• Highly compressed
• Above 8192 × 8192 resolution
Make sure the file is not:
• Above 1280 × 800 resolution
Make sure the file is not:
• Above 1280 × 800 resolution
• Animated
Make sure the file is not:
• Above 1280 × 800 resolution *
Supports only AVI 1.0.
Make sure the file is not:
• Saved with an audio codec other than PCM or
ADPCM
• Above 1280 × 720 resolution
• Larger than 2 GB
Precautions on PC Free Projection
Note the following precautions when using PC Free features.
• Do not disconnect the USB storage device while it is being accessed; otherwise, PC Free may not operate correctly.
• You may not be able to use the security features on certain USB storage devices with PC Free features.
• When connecting a USB device that includes an AC adapter, connect the
AC adapter to an electrical outlet when you use the device with your projector.
Projecting a PC Free Presentation
• Some commercially available USB card readers may not be compatible with the projector.
• The projector can recognize up to 5 cards inserted into the connected card reader at one time.
• You cannot correct keystone distortion while projecting in PC Free, so correct the image shape before you begin your presentation.
• You can use the following functions while projecting in PC Free.
• Freeze
• A/V Mute
• E-Zoom
• Pointer g Related Links
• "Stopping Video Action Temporarily" p.121
• "Shutting Off the Image and Sound Temporarily" p.120
• "Using the Remote Control as a Pointer" p.125
Starting a PC Free Slide Show
After connecting a USB device to the projector, you can switch to the USB input source and start your slide show.
a • You can change the PC Free operation options or add special effects by highlighting Option at the bottom of the screen and pressing
[Enter].
• You can operate your slide show using the interactive pen or your finger instead of the remote control (EB-695Wi/EB-685Wi/EB-
680Wi/EB-675Wi).
a Press the [USB] button on the remote control.
The PC Free file list screen is displayed.
116 a • If the Select Drive screen is displayed, press the arrow buttons to select the drive and press [Enter].
• To display the Select Drive screen, highlight Select Drive at the top of the file list screen and press [Enter].
b Do one of the following to locate your files:
• If you need to display files inside a subfolder on your device, press the arrow buttons to highlight the folder and press [Enter].
• To move back up a folder level on your device, highlight Back to
Top and press [Enter].
• To view additional files in a folder, highlight Next Page or Previous
Page and press [Enter], or press the [Page] up or down buttons on the remote control.
c Do one of the following:
• To display an individual image, press the arrow buttons to highlight the image and press [Enter]. (Press the [Esc] button to return to the file list screen.)
Projecting a PC Free Presentation
117
• To display a slide show of all the images in a folder, press the arrow buttons to highlight the Slideshow option at the bottom of the screen and press [Enter].
a • You can change the image switching time by highlighting
Option at the bottom of the screen and pressing [Enter].
• If any file names are longer than the display area or include unsupported symbols, the file names may be shortened or changed only on the screen display.
d While projecting, use the following commands to control the display:
• To rotate a displayed image, press the up or down arrow button.
You can also rotate the image by flicking it using the interactive pen
(EB-695Wi/EB-685Wi/EB-680Wi/EB-675Wi) or your finger (EB-
695Wi/EB-680Wi).
You can also move forward or backward by flicking the image using the interactive pen (EB-695Wi/EB-685Wi/EB-680Wi/EB-675Wi) or your finger (EB-695Wi/EB-680Wi).
e To stop the display, follow the on-screen instructions or press the [Esc] button.
You return to the file list screen.
f Turn off the USB device, if necessary, and then disconnect the device from the projector.
g Related Links
• "PC Free Display Options" p.119
• "Connecting to a USB Device" p.32
Starting a PC Free Movie Presentation
After connecting a USB device to the projector, you can switch to the USB input source and start your movie.
a • You can change the PC Free operation options by highlighting
Option at the bottom of the screen and pressing [Enter].
a Press the [USB] button on the remote control.
• To move to the next or previous image, press the left or right arrow button.
Projecting a PC Free Presentation
The PC Free file list screen is displayed.
a • If the Select Drive screen is displayed, press the arrow buttons to select the drive and press [Enter].
• To display the Select Drive screen, highlight Select Drive at the top of the file list screen and press [Enter].
b Do one of the following to locate your files:
• If you need to display files inside a subfolder on your device, press the arrow buttons to highlight the folder and press [Enter].
• To move back up a folder level on your device, highlight Back to
Top and press [Enter].
• To view additional files in a folder, highlight Next Page or Previous
Page and press [Enter], or press the [Page] up or down buttons on the remote control.
c To play back a movie, press the arrow buttons to highlight the file and press [Enter].
a • If any file names are longer than the display area or include unsupported symbols, the file names may be shortened or changed only on the screen display.
• If you want to play back all the movies in a folder in sequence, select the Slideshow option at the bottom of the screen.
d To stop movie playback, press the [Esc] button, highlight Exit, and press [Enter].
You return to the file list screen.
e Turn off the USB device, if necessary, and then disconnect the device from the projector.
g Related Links
• "PC Free Display Options" p.119
• "Connecting to a USB Device" p.32
118
Projecting a PC Free Presentation
PC Free Display Options
You can select these display options when using PC Free. To access this screen, highlight Option at the bottom of the PC Free file list screen and press
[Enter].
Setting
Effect
Options
No
Wipe
Dissolve
Random
119
Description
No effect
Transitions between images using a wipe effect
Transitions between images using a dissolve effect
Transitions between images using a random variety of effects
Setting
Display Order
Options
Name Order
Date Order
Description
Displays files in name order
Displays files in date order
Sort Order
Continuous Play On
Off
Screen Switching
Time
In Ascending
In Descending
No
Sorts files in first-to-last order
Sorts files in last-to-first order
Displays a slide show continuously
Displays a slide show once
Does not display the next file automatically
1 Second to 60 Seconds Displays files for the selected time and switches to the next file automatically; high resolution images may switch at a slightly slower rate
Shutting Off the Image and Sound Temporarily
You can temporarily turn off the projected image and sound if you want to redirect your audience's attention during a presentation. Any sound or video action continues to run, however, so you cannot resume projection at the point that you stopped it.
a • The projector's power automatically turns off 30 minutes after A/V
Mute is enabled. You can disable this feature in the projector's ECO menu.
s ECO > A/V Mute Timer
• The lamp is still operating during A/V Mute, so the lamp hours continue to accumulate.
g Related Links
• "Projector Setup Settings - Extended Menu" p.178
• "Projector Setup Settings - ECO Menu" p.191
120 a If you want to display an image such as a company logo or picture when the [A/V Mute] button is pressed, you can select the screen displayed in the A/V Mute setting in the projector's Extended menu.
s Extended > Display > A/V Mute a Press the [A/V Mute] button on the remote control to temporarily stop projection and mute any sound.
b To turn the image and sound back on, press [A/V Mute] again.
Stopping Video Action Temporarily
You can temporarily stop the action in a video or computer presentation and keep the current image on the screen. Any sound or video action continues to run, however, so you cannot resume projection at the point that you stopped it.
a Press the [Freeze] button on the remote control to stop the video action.
b To restart the video action in progress, press [Freeze] again.
121
Zooming Images
You can draw attention to parts of a presentation by zooming into a portion of the image and enlarging it on the screen.
122
The enlarged image is projected and the enlargement ratio is displayed on the screen.
a Press the [E-Zoom] + button on the remote control.
You see a crosshair on the screen indicating the center of the zoom area.
b Use the following buttons on the remote control to adjust the zoomed image:
• Use the arrow buttons to position the crosshair in the image area you want to zoom into. To move the crosshair diagonally, press any pair of adjacent arrow buttons at the same time.
• Press the [E-Zoom] + button repeatedly to zoom into the image area.
Press and hold the [E-Zoom] + button to zoom in more quickly. The selected area can be enlarged to between one to four times in 25 incremental steps.
• To pan around the zoomed image area, use the arrow buttons.
• To zoom out of the image, press the [E-Zoom] – button.
• To return to the original image size, press [Esc].
Using the Remote Control as a Wireless Mouse
You can use the projector's remote control as a wireless mouse so you can control projection at a distance from the computer.
a You can use the wireless mouse features with Windows Vista and later, or OS X 10.7.x and later.
a Connect the projector to a computer using the projector's USB-B,
Computer, or HDMI port.
a The wireless mouse function does not work when projecting images from a device connected to the HDMI1/MHL port using an MHL cable.
b If you connected your computer to the port other than the USB-B port, also connect a USB cable to the projector's USB-B port and to a USB port on your computer (for wireless mouse support).
c Start your presentation.
d Use the following buttons on the remote control to control your presentation:
123
• To move through slides or pages, press the [Page] up or down buttons.
• To move the cursor on the screen, use the arrow buttons. To move the cursor diagonally, press any pair of adjacent arrow buttons at the same time.
• To left-click, press the [Enter] button once (press it twice to doubleclick). To right-click, press the [Esc] button.
• To drag-and-drop, hold the [Enter] button as you move the cursor with the arrow buttons, then release [Enter] at the destination.
Using the Remote Control as a Wireless Mouse a • If the mouse button settings are set to reverse on the computer, the operation of the remote control buttons is also reversed.
• The Wireless Mouse function does not work under the following conditions:
• When the projector's menu or a Help screen is displayed.
• When USB Type B is set to Easy Interactive Function or USB
Display/Easy Interactive Function from the projector's Extended menu (EB-695Wi/EB-685Wi/EB-680Wi/EB-675Wi).
• When operating functions other than the Wireless Mouse function
(such as adjusting the volume).
However, when using the E-Zoom or Pointer function, the page up or down function is available.
g Related Links
• "Using the Remote Control as a Pointer" p.125
124
Using the Remote Control as a Pointer
You can use the projector's remote control as a pointer to help you focus your audience on important information on the screen. The default pointer shape is an arrow. You can change the shape in the Pointer Shape setting in the projector's Settings menu.
g Related Links
• "Projector Feature Settings - Settings Menu" p.175
125 a Press the [Pointer] button on the remote control.
b Use the arrow buttons to move the pointer on the screen. To move the pointer diagonally, press any pair of adjacent arrow buttons at the same time.
c Press [Esc] to remove the pointer from the screen.
Saving a User's Logo Image
You can save an image on the projector and display it whenever the projector turns on. You can also display the image when the projector is not receiving an input signal or when you temporarily stop projection (using A/V Mute).
This image is called the user's logo screen.
You can select a photo, graphic, or company logo as the user's logo, which is useful in identifying the projector's owner to help deter theft. You can prevent changes to the user's logo by setting up password protection.
a • Once you save a user's logo, you cannot return to the factory default logo.
• If the User's Logo Protection setting is set to On in the Password
Protection setting menu, set to Off before saving the user's logo.
• When you copy the menu settings from one projector to another using the batch setup feature, user's logo is also copied. Do not register the information that you do not want to share between multiple projectors as a user's logo.
a Display the image you want to project as the user's logo.
b Press the [Menu] button on the control panel or remote control.
c Select the Extended menu and press [Enter].
d Select User's Logo and press [Enter].
You see a prompt asking if you want to use the displayed image as a user's logo.
a Adjustments such as Keystone, E-Zoom, or Aspect are temporarily canceled when you select User's Logo.
e Select Yes and press [Enter].
You see a selection box overlaying your image.
a Depending on the current image signal, the screen size may change to match the resolution of the image signal.
126
Saving a User's Logo Image f Use the arrow buttons to surround the image area you want to use as the user's logo and press [Enter].
You see a prompt asking if you want to select this image area.
a You cannot change the image area size (400 × 300 pixels).
g Select Yes and press [Enter]. (If you want to change the selected area, select No, press [Enter], and repeat the last step.)
You see the User's Logo zoom factor menu.
h Select a zoom percentage and press [Enter].
127 i Select Yes and press [Enter].
The user's logo is overwritten and a completion message appears.
j Press [Esc] to exit the message screen.
k Select the Extended menu and press [Enter].
l m
Select Display and press [Enter].
Select when you want to display the User's Logo screen:
• To display it whenever there is no input signal, select Display
Background and set it to Logo.
• To display it whenever you turn the projector on, select Startup
Screen and set it to On.
• To display it whenever you press the [A/V Mute] button, select A/V
Mute and set it to Logo.
To prevent anyone from changing the User's Logo settings without first entering a password, set the User's Logo Protection setting to On in the
Password Protection setting menu and set the password.
g Related Links
• "Shutting Off the Image and Sound Temporarily" p.120
• "Selecting Password Security Types" p.140
You see a prompt asking if you want to save the image as the user's logo.
Saving a User Pattern
There are four types of patterns pre-registered in the projector, such as ruled lines and grid patterns. You can project these patterns to aid in presentations using the Pattern Display settings in the Settings menu.
You can also save the image that is currently being projected as a User
Pattern.
a Once you save a User Pattern, the pattern cannot be returned to the factory default.
a Project the image you want to save as the User Pattern, and then press the [Menu] button on the control panel or remote control.
c Select Pattern and press [Enter].
b Select the Settings menu and press [Enter].
d Select User Pattern and press [Enter].
You see a prompt asking if you want to use the displayed image as a
User Pattern.
a Adjustments such as Keystone, E-Zoom, Aspect, Adjust Zoom, or Image Shift are temporarily cancelled when you select User
Pattern.
e Select Yes and press [Enter].
You see a prompt asking if you want to save the image as the User
Pattern.
f Select Yes and press [Enter].
You see a completion message.
128
Using Multiple Projectors
You can combine the projected images from two or more projectors to create one large image.
a • Before starting projection, make sure you set Multi-Projection to On for all of the projectors.
s Extended > Multi-Projection > Multi-Projection
• Before starting projection, make sure you select the same color mode for all of the projectors.
s
Extended > Multi-Projection > Color Mode g Related Links
• "Projector Identification System for Multiple Projector Control" p.129
• "Adjusting Color Uniformity" p.131
• "Adjusting the Lamp's Brightness" p.133
• "Matching the Image Colors" p.134
Projector Identification System for Multiple Projector
Control
When lining up multiple projectors to project images, you can correct the brightness and color tone of each projector's image so that the images match closely.
129
You can set a unique projector ID for each projector to operate them individually using a remote control, and then correct the brightness and color for each projector.
a • In some cases the brightness and color tone may not match completely even after correction.
• If brightness and color tone differences become more noticeable over time, repeat the adjustments.
g Related Links
• "Setting the Projector ID" p.129
• "Selecting the Projector You want to Operate" p.130
Setting the Projector ID
To control multiple projectors from a remote control, give each projector a unique ID.
a b c d
Press the [Menu] button on the control panel or remote control.
Select the Extended menu and press [Enter].
Select Multi-Projection and press [Enter].
Select Projector ID and press [Enter].
Using Multiple Projectors e Use the arrow buttons to select the identification number you want to use for the projector. Then press [Enter].
The current Projector ID is displayed on the projected screen. It disappears after about 3 seconds.
130 b While holding the [ID] button, press the number button that matches the ID of the projector you want to operate.
f Press [Menu] or [Esc] to exit the menus.
Repeat these steps for all the other projectors you want to operate from one remote control.
Selecting the Projector You want to Operate
After setting the projector's ID, select the ID for the projector you want to operate using the remote control.
a Aim the remote control at the target projector and press the [ID] button.
The projector you want to operate is selected.
c Press the [ID] button to check if the ID-setting process worked.
You see a message displayed by the projector.
• If the remote control is listed as On, you can operate the projector from the remote control.
Using Multiple Projectors
• If the remote control is listed as Off, you cannot operate the projector from the remote control. Repeat the steps above to enable the remote control.
a • When you select 0 on the remote control, you can operate all projectors regardless the Projector ID setting.
• You must select the projector ID from the remote control each time you turn on the projector you have set it to control. When you turn on the projector, 0 is selected as the remote control's projector ID.
• When you set the Projector ID setting to Off, you can operate the projector using the remote control whichever ID you select on the remote control.
Adjusting Color Uniformity
If the color tone on the projected screen is uneven in each projector, adjust the color tone balance using each projector's Extended menu.
a • The color tone may not be uniform even after performing color uniformity.
• When the Color Mode is set to Dynamic, this function is disabled.
s Image > Color Mode
• This function is disabled in whiteboard mode.
131 a Press the [Menu] button, select the Extended menu, and press [Enter].
b Select Multi-Projection and press [Enter].
Using Multiple Projectors c Select Color Uniformity and press [Enter].
d Select Color Uniformity and press [Enter].
e Select On and press [Enter]. Then press [Esc].
f Select Adjustment Level and press [Enter].
g Select the level and press [Esc].
h Select Start Adjustments and press [Enter].
i Select the area you want to adjust, and press [Enter].
132
Adjust the circumference first. Finally select All, and then adjust the whole screen.
j Select the color (Red, Green, or Blue) you want to adjust, and use the left arrow button to weaken the color tone and the right arrow button to strengthen the color tone.
a The adjustment screen changes each time you press [Enter].
k Press [Esc] to return to the area selection screen.
l Repeat these steps to adjust each area.
Using Multiple Projectors m Press [Esc] to return to the previous screen.
Adjusting the Lamp's Brightness
When projecting with multiple projectors, you must adjust the brightness setting for each projector.
Turn on all the projectors and select the Brightness Level setting in each projector's Extended menu so that all the projectors are as bright as the darkest lamp on the combined screen.
a • Even after adjusting the brightness levels, the brightness of each lamp may not match exactly.
• This function is only available when Power Consumption is set to
Normal.
s ECO > Power Consumption
• This function is disabled in whiteboard mode.
a Press the [Menu] button, select the Extended menu, and press [Enter].
b Select Multi-Projection and press [Enter].
c Select Brightness Level and press [Enter].
133
Using Multiple Projectors d Select the brightness level, and press [Enter].
134 a Press the [Menu] button, select the Extended menu, and press [Enter].
e Press [Esc] to return to the previous screen.
Matching the Image Colors
You can match the display quality of multiple projectors that will project next to each other.
Turn on all the projectors and select the Color Matching setting in each projector's Extended menu so that all the projectors' display quality match on the combined screen.
a This function is disabled in whiteboard mode.
b Select Multi-Projection and press [Enter].
Using Multiple Projectors c Select Color Matching and press [Enter].
d Select Adjustment Level.
There are six adjustment levels from white through gray, and up to black. You can adjust each level individually.
135
Adjusting RGBCMY
You can adjust the Hue, Saturation, and Brightness settings for R (red), G
(green), B (blue), C (cyan), M (magenta), and Y (yellow) color components.
Turn on all the projectors and select the RGBCMY setting in each projector's
Extended menu so that the color tone on the combined screen becomes entirely even.
a This function is disabled in whiteboard mode.
a Press the [Menu] button, select the Extended menu, and press [Enter].
e Select Red, Green, or Blue, and adjust the color tone.
f Select Brightness, and adjust the value.
g Return to step 4 and adjust another level.
h Press the [Esc] button to return to the previous screen.
Using Multiple Projectors b Select Multi-Projection and press [Enter].
c Select RGBCMY and press [Enter].
e Do the following as necessary for each setting:
• To adjust the overall hue of the color, bluish - greenish - reddish, adjust the Hue setting.
• To adjust the overall vividness of the color, adjust the Saturation setting.
• To adjust the overall color brightness of the color, adjust the
Brightness setting.
136 f Press [Menu] or [Esc] to exit the menus.
d Select the color to adjust, and press [Enter].
Projecting Images from the HDMI3 Port with the Optional Interface Box
When the optional interface box (ELPCB02) is being connected to the projector, you need to select the following settings to project images from the device connected to the projector's HDMI3 port. After selecting the settings, the input source switches between HDMI2 and HDMI3 each time you press the [HDMI2] button on the interface box.
b Select the Extended menu and press [Enter].
137 a Press the [Menu] button on the control panel or remote control.
c Select Operation and press [Enter].
Projecting Images from the HDMI3 Port with the Optional Interface Box d Select Connect ELPCB02 and press [Enter].
138 e Select On and press [Enter].
The input source switches between HDMI2 and HDMI3 every time you press the [HDMI2] button on interface box.
f Press [Menu] or [Esc] to exit the menus.
Projector Security Features
You can secure your projector to deter theft or prevent unintended use by setting up the following security features:
• Password security to prevent people who do not know the password from using the projector, and prevent changes to the startup screen and other settings.
This acts as an anti-theft function as the projector cannot be used even if it is stolen, and you can limit who can use the projector.
• Button lock security to block operation of the projector using the buttons on the control panel.
This is useful at events or shows when you want to deactivate all buttons during projection or at schools when you want to limit button operation.
• Security cabling to physically secure the projector in place.
g Related Links
• "Password Security Types" p.139
• "Locking the Projector's Buttons" p.141
• "Installing a Security Cable" p.143
Password Security Types
You can set up the following types of password security using one shared password:
• Power On Protection password prevents anyone from using the projector without first entering a password. When plugging the power cord and turning on the projector at first time, you must enter the correct password.
This also applies to Direct Power On and Auto Power On.
• User's Logo Protection password prevents anyone from changing the custom screen displayed when the projector turns on, when no signal is being input, or when you use the A/V Mute feature. The custom screen discourages theft by identifying the projector's owner.
• Network Protection password prevents anyone from changing the projector's Network settings.
g Related Links
• "Selecting Password Security Types" p.140
• "Entering a Password to Use the Projector" p.141
Setting a Password
To use password security, you must set a password.
a The default password is set to "0000". Change this to your own password.
a Hold down the [Freeze] button on the remote control for about 5 seconds.
You see the Password Protection setting menu.
a If Password Protection is already activated, you must enter the correct password to display the Password Protection setting menu.
139
Projector Security Features b Select Password and press [Enter].
You see the prompt "Change the password?".
c Select Yes and press [Enter].
a If you select No, the Password Protection setting menu is displayed again.
d Hold down the [Num] button on the remote control and use the numeric buttons to set a four-digit password.
140
The password displays as **** as it is entered. A confirmation prompt is displayed when you enter the fourth digit.
e Enter the password again.
You see the message "Password accepted". If you enter the password incorrectly, a message is displayed prompting you to re-enter the password.
f Press [Esc] to return to the menu.
g Make a note of the password and keep it in a safe place.
Selecting Password Security Types
After setting a password, you see this menu, allowing you to select the password security types you want to use.
If you do not see this menu, hold down the [Freeze] button on the remote control for 5 seconds until the menu appears.
• To prevent unauthorized use of the projector, select On as the Power On
Protection setting.
• To prevent changes to the User's Logo screen or related display settings, select On as the User's Logo Protection setting.
• To prevent changes to network settings, select On as the Network
Protection setting.
Projector Security Features
You can attach the password protect sticker to the projector as an additional theft deterrent.
a Be sure to keep the remote control in a safe place; if you lose it, you will not be able to enter the password.
Entering a Password to Use the Projector
When the password screen is displayed, enter the correct password.
a Hold down the [Num] button on the remote control while you enter the password using the numeric buttons.
141
The password screen closes.
b If the password is incorrect, you see a message and a prompt to try again. Enter the correct password to proceed.
Attention
• If an incorrect password is entered three times in succession, the message
"The projector's operation will be locked." is displayed for approximately
5 minutes, and the projector switches to standby mode. If this happens, disconnect the power plug from the electrical outlet, reinsert it, and turn the projector back on. The projector displays the password entry screen again so that you can enter the correct password.
• If you have forgotten the password, make a note of the "Request Code: xxxxx" number that appears on the screen and contact Epson for help.
• If you continue to repeat the above operation and input the wrong password 30 times in succession, the message "The projector's operation will be locked. Contact Epson as described in your documentation." is displayed and the projector does not accept any more password entries.
Contact Epson for help.
Locking the Projector's Buttons
You can lock the buttons on the control panel to prevent anyone from using the projector. The projector can still be operated using the remote control.
a Press the [Menu] button on the control panel or remote control.
Projector Security Features b Select the Settings menu and press [Enter].
d Select Control Panel Lock and press [Enter].
142 c Select Lock Setting and press [Enter].
e Select one of these lock types and press [Enter]:
• To lock all of the projector's buttons, select Full Lock.
• To lock all buttons except the power button, select Partial Lock.
You see a confirmation prompt.
f Select Yes and press [Enter].
The Control Panel Lock setting takes effect.
g Related Links
• "Unlocking the Projector's Buttons" p.142
Unlocking the Projector's Buttons
If the projector's buttons have been locked, do one of the following to unlock them.
• Hold down the [Enter] button on the control panel for 7 seconds. A message is displayed and the lock is released.
• Select Off as the Control Panel Lock setting in the projector's Settings menu.
Projector Security Features s
Settings > Lock Setting > Control Panel Lock g Related Links
• "Projector Feature Settings - Settings Menu" p.175
Installing a Security Cable
You can install the security cable on the projector to deter theft.
• Use the security slot on the projector to attach a Kensington Microsaver
Security system.
a For more details on the Microsaver Security System, see http://www.kensington.com/ .
• Use the security cable attachment point on the projector to attach a wire cable and secure it to a room fixture or heavy furniture.
a You can use a commercially available theft-prevention wire lock. See the documentation supplied with the wire lock for locking instructions.
143
Using the Projector on a Network
Follow the instructions in these sections to set up your projector for use on a network.
g Related Links
• "Wired Network Projection" p.145
• "Wireless Network Projection" p.148
Wired Network Projection
145
You can send images to your projector through a wired network. To do this, connect the projector to your network, and then set up your projector and computer for network projection.
After connecting and setting up the projector as described here, install
EasyMP Multi PC Projection from the Epson Projector Software CD-ROM (if available) or Web site.
EasyMP Multi PC Projection software sets up your computer for network projection. It also allows you to hold interactive meetings by projecting user's computer screens over a network. See the EasyMP Multi PC Projection
Operation Guide for instructions.
g Related Links
• "Connecting to a Wired Network" p.145
• "Selecting Wired Network Settings" p.145
Connecting to a Wired Network
To connect the projector to a wired local area network (LAN), use a 100Base-
TX or 10Base-T network cable. To ensure proper data transmission, use a
Category 5 shielded cable or better.
a Connect one end of the network cable to your network hub, switch, or router.
b Connect the other end of the cable to the projector's LAN port.
Selecting Wired Network Settings
Before you can project from computers on your network, you need to select network settings on the projector.
a Make sure you already connected the projector to your wired network using the LAN port.
a Press the [Menu] button on the control panel or remote control.
Wired Network Projection b Select the Network menu and press [Enter].
c Select Network Configuration and press [Enter].
d Select the Basic menu and press [Enter].
146 e Select the basic options as necessary.
• Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the projector over the network.
• PJLink Password lets you enter a password up to 32 alphanumeric characters long for using the PJLink protocol for projector control.
• Remote Password lets you enter a password up to 8 alphanumeric characters long for accessing the projector using the Web Remote.
(User name is EPSONREMOTE; default password is guest.)
• Web Control Password lets you enter a password up to 8 alphanumeric characters long for accessing the projector over the
Web. (User name is EPSONWEB; default password is admin.)
• Moderator Password lets you enter a four-digit number password for accessing the projector as a moderator using EasyMP Multi PC
Projection or Epson iProjection. (No password is set by default.)
• Projector Keyword lets you turn on a security password to prevent access to the projector by anyone not in the room with it. You must enter a displayed, randomized keyword from a computer using
EasyMP Multi PC Projection or Epson iProjection to access the projector and share the current screen.
• Display LAN Info. lets you set the display format for the projector's network information.
a Use the displayed keyboard to enter the name, passwords and keyword. Press the arrow buttons on the remote control to highlight characters and press [Enter] to select them.
Wired Network Projection f Select the Wired LAN menu and press [Enter].
k Press the [LAN] button on the remote control.
The wired network settings complete when you see the correct IP address on the LAN standby screen.
EB ＊＊＊＊＊＊
147 g Select IP Settings and press [Enter].
h Select your IP Settings as necessary.
• If your network assigns addresses automatically, set the DHCP setting to On.
• If you must set addresses manually, set the DHCP setting to Off and enter the projector's IP Address, Subnet Mask, and Gateway
Address as necessary.
a To highlight the numbers you want from the displayed keyboard, press the arrow buttons on the remote control. To select a highlighted number, press [Enter].
i To prevent the IP address from being displayed on the LAN standby screen and Home screen, set the IP Address Display setting to Off.
j When you finish selecting settings, select Complete and follow the onscreen instructions to save your settings and exit the menus.
Wireless Network Projection
You can send images to your projector through a wireless network.
To do this, you must install the Epson 802.11b/g/n wireless LAN module, and then set up your projector and computer for wireless projection using the projector's Network menus.
After installing the wireless LAN module and setting up the projector, install the network software from the Epson Projector Software CD-ROM (if available) or download the software, as necessary. Use the following software and documentation to set up and control wireless projection:
• EasyMP Multi PC Projection software allows you to hold interactive meetings by projecting the computer screens of users over a network. See the EasyMP Multi PC Projection Operation Guide for instructions.
• Epson iProjection app allows you to project from iOS or Android devices.
You can download Epson iProjection from App Store or Google play. Any fees incurred when communicating with App Store or Google play are the responsibility of the customer.
g Related Links
• "Installing the Wireless LAN Module" p.148
• "Selecting Wireless Network Settings Manually" p.149
• "Selecting Wireless Network Settings in Windows" p.151
• "Selecting Wireless Network Settings in OS X" p.151
• "Setting Up Wireless Network Security" p.151
• "Using a QR Code to Connect a Mobile Device" p.152
• "Using a USB Key to Connect a Windows Computer" p.153
Installing the Wireless LAN Module
To use the projector over a wireless network, install the Epson 802.11b/g/n wireless LAN module. Do not install any other type of wireless LAN module.
Attention
Never remove the module while its indicator is blue or flashing, or while you are projecting wirelessly. This could damage the module or lose data.
a Remove both of the cable cover screws to open the cable cover.
148
Wireless Network Projection b Connect the Wireless LAN module to the wireless LAN module slot.
b Select the Network menu and press [Enter].
149
Selecting Wireless Network Settings Manually
Before you can project from your wireless network, you need to select network settings for the projector.
a Press the [Menu] button on the control panel or remote control.
c Select Wireless LAN On as the Wireless Mode setting.
d Select Network Configuration and press [Enter].
Wireless Network Projection e Select the Basic menu and press [Enter].
150
• Display LAN Info. lets you set the display format for the projector's network information.
a Use the displayed keyboard to enter the name and password.
Press the arrow buttons on the remote control to highlight characters and press [Enter] to select them.
g Select the Wireless LAN menu and press [Enter].
f Select the basic options as necessary.
• Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the projector over the network.
• PJLink Password lets you enter a password up to 32 alphanumeric characters long for using the PJLink protocol for projector control.
• Remote Password lets you enter a password up to 8 alphanumeric characters long for accessing the projector using the Web Remote.
(User name is EPSONREMOTE; default password is guest.)
• Web Control Password lets you enter a password up to 8 alphanumeric characters long for accessing the projector over the
Web. (User name is EPSONWEB; default password is admin.)
• Moderator Password lets you enter a four-digit number password for accessing the projector as a moderator using EasyMP Multi PC
Projection or Epson iProjection. (No password is set by default.)
• Projector Keyword lets you turn on a security password to prevent access to the projector by anyone not in the room with it. You must enter a displayed, randomized keyword from a computer using
EasyMP Multi PC Projection or Epson iProjection to access the projector and share the current screen.
h Select the Connection Mode setting.
• Quick lets you connect to multiple smartphones, tablets, or computers directly using wireless communication.
• Advanced lets you connect to smartphones, tablets, or computers over a wireless network access point.
i If you selected the Advanced connection mode, select Search Access
Point to select the access point you want to connect to.
a If you need to assign the SSID manually, select SSID to enter the
SSID.
Wireless Network Projection
151 j For the Advanced connection mode, assign the IP settings for your network as necessary.
• If your network assigns addresses automatically, select IP Settings to set the DHCP setting to On.
• If you must set addresses manually, select IP Settings to set the
DHCP setting to Off, and then enter the projector's IP Address,
Subnet Mask, and Gateway Address as necessary.
k To prevent the SSID or IP address from being displayed on the LAN standby screen and Home screen, set the SSID Display setting or the IP
Address Display setting to Off.
l When you have finished selecting settings, select Complete and then follow the on-screen instructions to save your settings and exit the menus.
m Press the [LAN] button on the remote control.
The wireless network settings are complete when you see the correct IP address on the LAN standby screen.
EB ＊＊＊＊＊＊
When you have finished making wireless settings for your projector, you need to select the wireless network on your computer. Then start the network software to send images to your projector through a wireless network.
Selecting Wireless Network Settings in Windows
Before connecting to the projector, select the correct wireless network on your computer.
a To access your wireless utility software, double-click the network icon on the Windows taskbar.
b When connecting in Advanced connection mode, select the network name (SSID) of the network the projector is connecting to.
c Click Connect.
Selecting Wireless Network Settings in OS X
Before connecting to the projector, select the correct wireless network in OS
X.
a Click the AirPort icon on the menu bar at the top of the screen.
b When connecting in Advanced connection mode, make sure AirPort is turned on and select the network name (SSID) of the network the projector is connecting to.
Setting Up Wireless Network Security
You can set up security for your projector to use on a wireless network. Set up one of the following security options to match the settings used on your network:
• WPA2-PSK security
• WPA/WPA2-PSK security *
* Only available for the Advanced connection mode.
Wireless Network Projection a Contact your network administrator for guidance on entering the correct information.
a b c d
Press the [Menu] button on the control panel or remote control.
Select the Network menu and press [Enter].
Select Network Configuration and press [Enter].
Select the Wireless LAN menu and press [Enter].
e Select the Security setting and press [Enter].
f Select the security settings to match your network settings.
g When you have finished making settings, select Complete and follow the on-screen instructions to save your settings and exit the menus.
g Related Links
• "Network Menu - Wireless LAN Menu" p.186
Using a QR Code to Connect a Mobile Device
After selecting the wireless network settings for your projector, you can display a QR code on the screen and use it to connect a mobile device using the Epson iProjection app.
152
Wireless Network Projection
153 a • Make sure you have installed the latest version of Epson iProjection on your device (V1.3.0 or later supports this feature).
• You can download Epson iProjection for free from App Store or
Google Play. Any fees incurred when communicating with App Store or Google Play are the responsibility of the customer.
• When using Epson iProjection in Quick connection mode, we recommend making security settings.
a Press the [LAN] button on the remote control.
The QR code is displayed on the projected surface.
a • If you do not see the QR code, set the Display LAN Info. setting to Text & QR Code in the projector's Network menu.
s Network > Network Configuration > Basic > Display
LAN Info.
• To hide the QR code, press the [Esc] button.
• When the QR code is hidden, press the [Enter] button to display the code.
• You can also display the QR code by selecting the icon on the
Home screen.
b Start Epson iProjection on your mobile device.
c Read the projected QR code using Epson iProjection to connect it to the projector.
a To correctly read the QR code, make sure you face the screen squarely and closely enough so that the projected code fits into the guide of the mobile device's QR code reader. If you are too far from the screen, the code may not be read.
When a connection is established, select Contents menu from , and then select the file you want to project.
Using a USB Key to Connect a Windows Computer
You can set up your USB flash drive as a USB key to quickly connect the projector to a wireless LAN supported Windows computer. After creating the
USB key, you can quickly project images from the network projector.
a Set up the USB key using EasyMP Multi PC Projection.
a See the EasyMP Multi PC Projection Operation Guide for instructions.
b Make sure the wireless LAN module is installed into your projector.
c Turn on the projector.
d Press the [LAN] button on the remote control.
The LAN standby screen is displayed. Verify that an SSID and IP address are displayed.
e Connect the USB key to the projector's USB-A port.
You see a projected message that the network information update is complete.
f Remove the USB key.
g Connect the USB key to a USB port on your computer.
a In Windows Vista, if the AutoPlay window is displayed, select
MPPLaunch.exe, then select Allow.
h Follow the on-screen instructions to install the necessary application.
Wireless Network Projection a • If the Windows Firewall message is displayed, click Yes to disable the firewall.
• You need administrator authority to install the software.
• If it is not installed automatically, double-click
MPPLaunch.exe in the USB key.
After a few minutes, your computer image is displayed by the projector.
i When you have finished projecting wirelessly, select the Safely Remove
Hardware option in the Windows taskbar, and then remove the USB key from your computer.
a You may need to restart your computer to reactivate your wireless LAN connection.
154
Monitoring and Controlling the Projector
Follow the instructions in these sections to monitor and control the projector over a network.
g Related Links
• "Controlling a Networked Projector Using a Web Browser" p.157
• "Setting Up Projector Network E-Mail Alerts" p.159
• "Setting Up Monitoring Using SNMP" p.160
• "Using ESC/VP21 Commands" p.161
• "Crestron RoomView Support" p.164
EasyMP Monitor
EasyMP Monitor software (Windows only) lets you monitor and control your projector through the network. See the EasyMP Monitor Operation Guide for instructions.
You can download EasyMP Monitor from the following Web site.
http://www.epson.com/
156
Controlling a Networked Projector Using a Web Browser
Once you have connected your projector to your network, you can select projector settings and control projection using a compatible Web browser.
This lets you access the projector remotely.
a • Make sure the computer and projector are connected to the network.
When projecting images using a wireless LAN, connect in Advanced connection mode.
• The Web setup and control features support Internet Explorer 9.0 or later (Windows), and Safari (OS X) on networks that do not use a proxy server for connection. You cannot select all of the projector menu settings or control all projector functions using a Web browser.
• If you set Standby Mode to Communication On in the projector's
ECO menu, you can use a Web browser to select settings and control projection even if the projector is in standby mode (when the power is off).
a b
Make sure the projector is turned on.
Make sure your computer or device is connected to the same network as the projector.
c d
Start your Web browser on the computer or device.
Go to the Epson Web Control screen by entering the projector's IP address into the browser's address box.
e Select the a icon to access the Web Control screen.
• You may need to log in before you see the Web Control screen.
If a login screen is displayed, enter your user name and password. (The user name is EPSONWEB and the default password is admin.)
• You can change the password in Web Control Password in the projector's Network menu.
s Network > Network Configuration > Basic > Web
Control Password
157 f To select projector menu settings, select the name of the menu and follow the on-screen instructions to select settings.
a • You cannot select the following settings using a Web browser.
• Image Shift
• HDMI Link
• Pointer Shape
• User Button
• Test Pattern
• Installation Guide
• Easy Interactive Function
• User's Logo
• USB Type B
• Language
• Event ID
• Reset Lamp Hours
• Printer Settings
• You can select the following settings only using a Web browser.
• Monitor Password (up to 16 alphanumeric characters)
• HTTP port (port number used for Web Control except for
80 [default], 843, 3620, 3621, 3625, 3629, 4352, 4649, 5357,
10000, 10001, 41794) g To control projection remotely, select the a icon.
• If you see a log in window, enter your user name and password. (The user name is EPSONREMOTE and the default password is guest.)
• You can change the password in Remote Password in the projector's Network menu.
s Network > Network Configuration > Basic > Remote
Password
Controlling a Networked Projector Using a Web Browser h Select the icon corresponding to the projector function you want to control.
• "Projector Setup Settings - ECO Menu" p.191
158
A
Power button control
B
Selects Computer port source
C
Selects Video and HDMI port sources
D
Freeze button control
E
A/V Mute button control
F
Page Up and Page Down button controls
G
Searches for sources
H
Selects the network source
I
Selects the USB Display or USB device source
J
Volume button controls
K
Displays the QR code g Related Links
• "Network Menu - Basic Menu" p.185
Setting Up Projector Network E-Mail Alerts
159
You can set up the projector to send you an e-mail alert over the network if there is a problem with the projector.
If you set the Standby Mode setting to Communication On in the projector's
ECO menu, you can receive the e-mail alerts even if the projector is in standby mode (when the power is off).
a b c d
Press the [Menu] button on the control panel or remote control.
Select the Network menu and press [Enter].
Select Network Configuration and press [Enter].
Select the Notifications menu and press [Enter].
e Set the Mail Notification setting to On.
f Enter the IP address for the SMTP Server option.
a Do not use these addresses: 127.x.x.x or 224.0.0.0 through
255.255.255.255 (where x is a number from 0 to 255).
g Select a number for the SMTP server Port Number, from 1 to 65535
(default is 25).
h Enter the e-mail address to be indicated as the sender in From.
i Choose an address field, enter the e-mail address, and select the alerts you want to receive. Repeat for up to three addresses.
a Your e-mail address can be up to 32 alphanumeric characters long.
j When you finish selecting settings, select Complete and follow the onscreen instructions to save your settings and exit the menus.
a If a critical problem causes a projector to shut down, you may not receive an e-mail alert.
g Related Links
• "Network Projector E-mail Alert Messages" p.159
• "Projector Setup Settings - ECO Menu" p.191
Network Projector E-mail Alert Messages
When a problem occurs with a projector on the network, and you selected to receive e-mail alerts, you receive an e-mail containing the following information:
• The email address set in From as the mail sender
• Epson Projector in the subject line
• The name of the projector experiencing a problem
• The IP address of the affected projector
• Detailed information about the problem
Setting Up Monitoring Using SNMP
Network administrators can install SNMP (Simple Network Management
Protocol) software on network computers so they can monitor projectors. If your network uses this software, you can set up the projector for SNMP monitoring.
a Press the [Menu] button on the control panel or remote control.
b Select the Network menu and press [Enter].
c Select Network Configuration and press [Enter].
d Select the Notifications menu and press [Enter].
160 g Enter the SNMP Community Name up to 32 alphanumeric characters long.
h When you have finished selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus.
e Set the SNMP setting to On.
f Enter up to two IP addresses to receive SNMP notifications, using 0 to
255 for each address field.
a Do not use these addresses: 127.x.x.x or 224.0.0.0 through
255.255.255.255 (where x is a number from 0 to 255). This projector supports SNMP agent version 1 (SNMPv1).
Using ESC/VP21 Commands
You can control the projector from an external device using ESC/VP21.
g Related Links
• "ESC/VP21 Command List" p.161
ESC/VP21 Command List
When the power ON command is transmitted to the projector, the power turns on and it enters warm-up mode. When the projector's power has turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and returns a
":", and then accepts the next command.
If the command being processed terminates abnormally, an error message is output and a ":" is returned.
The following commands are available.
Item
Power On/Off On
Off
Command
PWR ON
PWR OFF
Item
Signal selection Computer1
Computer2
HDMI1/MHL
HDMI2
HDMI3
Video
USB Display
USB
LAN
A/V Mute On/Off On
Off
Auto
RGB
Component
Auto
RGB
Component
Command
SOURCE 1F
SOURCE 11
SOURCE 14
SOURCE 2F
SOURCE 21
SOURCE 24
SOURCE 30
SOURCE A0
SOURCE C0
SOURCE 41
SOURCE 51
SOURCE 52
SOURCE 53
MUTE ON
MUTE OFF
Add a Carriage Return (CR) code (0Dh) to the end of each command and transmit.
Contact Epson for more details.
Cable Layouts
Serial connection
• Connector shape: D-Sub 9-pin (male)
• Projector input port name: RS-232C
• Cable type: Crossover (null modem) cable
161
Using ESC/VP21 Commands
In the following illustration, the projector side is shown on the left, and the computer side on the right:
Signal name
GND
TD
RD
Communications protocol
• Default baud rate setting: 9600 bps
• Data length: 8 bit
• Parity: None
• Stop-bit: 1 bit
• Flow control: None
Function
Signal wire ground
Transmit data
Receive data
162
PJLink Support
PJLink was established by the JBMIA (Japan Business Machine and
Information System Industries Association) as a standard protocol for controlling network-compatible projector's as part of their efforts to standardize projector control protocols.
The projector complies with the PJLink Class2 standard established by the
JBMIA.
The port number used for the PJLink search function is 4352 (UDP).
You need to make network settings before you can use PJLink.
It complies with all commands except for the following commands defined by
PJLink Class2, and agreement was confirmed by the PJLink standard adaptability verification.
http://pjlink.jbmia.or.jp/english/
• Non-compatible commands
Function
Mute settings Image muting set
Audio muting set
PJLink command
AVMT 11
AVMT 21
• Input ports and corresponding input source number
Input port name
Computer1
Computer2
Video
HDMI1/MHL
HDMI2
HDMI3
USB
LAN
USB Display
41
52
53
21
32
33
36
Input source number
11
12
163
• Manufacturer name displayed for "Manufacture name information query"
EPSON
• Model name displayed for "Product name information query"
• EPSON 695Wi/695WT
• EPSON 685Wi/685WT
• EPSON 680Wi
• EPSON 675Wi
• EPSON 685W
• EPSON 675W
• EPSON 680
• EPSON 670
Crestron RoomView Support
164
If you are using the Crestron RoomView network monitoring and control system, you can set up your projector for use on the system. Crestron
RoomView lets you control and monitor your projector using a Web browser.
a • You cannot use the Epson Web Control feature or the Message
Broadcasting plug-in for EasyMP Monitor when you use Crestron
RoomView.
• If you set the Standby Mode setting to Communication On in the projector's ECO menu, you can control the projector even if the projector is in standby mode (when the power is off).
For additional information on Crestron RoomView, visit the Crestron Web site.
http://www.crestron.com
To monitor devices in the system, you can use Crestron RoomView Express or Crestron RoomView Server Edition provided by Creston. You can communicate with the help desk and send emergency messages. See the following Web site for details.
http://www.crestron.com/getroomview
This manual describes how to perform operations on your computer using a
Web browser.
g Related Links
• "Setting Up Crestron RoomView Support" p.164
• "Controlling a Networked Projector Using Crestron RoomView" p.164
Setting Up Crestron RoomView Support
To set up your projector for monitoring and control using a Crestron
RoomView system, make sure your computer and projector are connected to the network. If you are connecting wirelessly, set up the projector using the
Advanced network connection mode.
a b
Press the [Menu] button on the control panel or remote control.
Select the Network menu and press [Enter].
c Select Network Configuration and press [Enter].
d Select the Others menu and press [Enter].
e Set the Crestron RoomView setting to On to allow the projector to be detected.
f When you have finished selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus.
g Turn off the projector, and then turn it on again to enable the setting.
Controlling a Networked Projector Using Crestron
RoomView
Once you have set up your projector to use Crestron RoomView, you can control and monitor projection using a compatible Web browser.
a Start your Web browser on a computer connected to the network.
Crestron RoomView Support b Type the projector's IP address into the browser's address box and press the computer's Enter key.
You see this screen:
165 g Related Links
• "Crestron RoomView Operation Window" p.165
• "Crestron RoomView Tools Window" p.166
Crestron RoomView Operation Window
Settings on the operation window let you control the projector and adjust the projection image.
c Select the input source that you want to control in the Sources List box.
You can scroll through available sources using the up and down arrows in the box.
d To control projection remotely, click the on-screen buttons that correspond to the projector's remote control buttons. You can scroll through button options at the bottom of the screen.
a These on-screen buttons do not directly correspond to the projector's remote control buttons:
• OK acts as the [Enter] button
• Menu displays the projector's menu e To view information about the projector, click the Info tab.
f To change the projector, Crestron, and password settings, click the
Tools tab, select settings on the displayed screen, and then click Send.
g When you finish selecting settings, click Exit to exit the program.
A
Power
Vol-/Vol+
Turns the projector on or off.
Adjusts the volume.
A/V Mute Turns the video and audio on or off.
B
Switches to the image from the selected input source. To display input sources that are not shown in Sources List, click (a) or (b) to scroll up or down. The current video signal input source is displayed in blue.
You can change the source name if necessary.
Crestron RoomView Support
C
Freeze
Contrast
Brightness
Color
Sharpness
Zoom
D
Arrow buttons
OK
Menu
Auto
Search
Esc
E
Contact IT Help
Info
Tools
Images are paused or released.
Adjusts the difference between light and shade in the images.
Adjusts the image brightness.
Adjusts the color saturation for the images.
Adjusts the image sharpness.
Enlarges or reduces the image without changing the projection size. Click the arrow buttons to change the position of an enlarged image.
Performs the same operations as the arrow buttons on the remote control.
Performs the same operation as [Enter] on the remote control.
Displays and closes the projector's menu.
Optimizes Tracking, Sync., and Position in the projector's Signal menu while projecting an analog
RGB signal from Computer1 or Computer2 port.
Changes to the next input source that is sending an image.
Performs the same operation as the [Esc] button on the remote control.
Displays the Help Desk window. Used to send messages to, and receive messages from, the administrator using Crestron RoomView Express.
Displays information on the projector that is currently connected.
Changes settings in the projector that is currently connected.
Crestron RoomView Tools Window
Settings on the Tools window let you customize various projector setup features.
166
A
Make settings for Crestron central controllers.
B
Projector Name Enter a name to differentiate the projector that is currently connected from other projectors on the network. (up to 16 alphanumeric characters)
Location
Assigned To
DHCP
IP Address
Subnet Mask
Default Gateway
Send
Enter an installation location name for the projector that is currently connected on the network. (up to 32 alphanumeric characters and symbols)
Enter a user name for the projector. (up to 32 alphanumeric characters and symbols)
Select to use DHCP. You cannot enter an IP address if
DHCP is enabled.
Enter the IP address to assign to the currently connected projector.
Enter a subnet mask for the currently connected projector.
Enter the gateway address for the currently connected projector.
Click to confirm the changes made to the Projector.
Crestron RoomView Support
C
Enabled (Admin
Password)
New Password
Confirm
Send
D
Enabled (User
Password)
New Password
Confirm
Send
Select to require a password to open the Tools window.
Enter the new password when changing the password to open the Tools window. (up to 26 alphanumeric characters)
Enter the same password as you entered in New
Password. If the passwords are not the same, an error is displayed.
Click to confirm the changes made to the Admin
Password.
Select to require a password to open the operation window on the computer.
Enter the new password when changing the password to open the operation window. (up to 26 alphanumeric characters)
Enter the same password as you entered in New
Password. If the passwords are not the same, an error is displayed.
Click to confirm the changes made to the User
Password.
167
Adjusting the Menu Settings
Follow the instructions in these sections to access the projector menu system and change projector settings.
g Related Links
• "Using the Projector's Menus" p.169
• "Using the On-screen Keyboard" p.170
• "Image Quality Settings - Image Menu" p.171
• "Input Signal Settings - Signal Menu" p.173
• "Projector Feature Settings - Settings Menu" p.175
• "Projector Setup Settings - Extended Menu" p.178
• "Projector Network Settings - Network Menu" p.184
• "Projector Setup Settings - ECO Menu" p.191
• "Projector Information Display - Info Menu" p.193
• "Projector Reset Options - Reset Menu" p.195
• "Copying Menu Settings Between Projectors (Batch Setup)" p.196
Using the Projector's Menus
You can use the projector's menus to adjust the settings that control how your projector works. The projector displays the menus on the screen.
a Press the [Menu] button on the control panel or remote control.
You see the menu screen displaying the Image menu settings.
169 a The available settings depend on the current input source.
c d e
To change settings in the displayed menu, press [Enter].
Press the up or down arrow button to move through the settings.
Change the settings using the buttons listed on the bottom of the menu screens.
f g h
To return all the menu settings to their default values, select Reset.
When you finish changing settings on a menu, press [Esc].
Press [Menu] or [Esc] to exit the menus.
b Press the up or down arrow buttons to move through the menus listed on the left. The settings for each menu are displayed on the right.
Using the On-screen Keyboard
The on-screen keyboard is displayed when you need to enter numbers and characters.
a Use the arrow buttons on the control panel or remote control to highlight the number or character you want to enter and press the
[Enter] button.
170
Available Text Using the On-screen Keyboard
You can enter the following text when using the on-screen keyboard.
Text type
Numbers
Alphabet
Symbols
Details
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXY
Z abcdefghijklmnopqrstuvwxyz
! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ]
^ _ ` { | } ~ a Each time you select the CAPS key, the characters change between upper case and lower case. Each time you select the
SYM1/2 key, the symbols enclosed by the frame change.
b After entering the text, select Finish on the keyboard to confirm your entries. Select Cancel to cancel entering text.
a You can select projector settings and control projection over a network using a Web browser from your computer.
Some symbols cannot be entered using the on-screen keyboard. Use your Web browser to enter the text.
g Related Links
• "Available Text Using the On-screen Keyboard" p.170
• "Controlling a Networked Projector Using a Web Browser" p.157
Image Quality Settings - Image Menu
Settings on the Image menu let you adjust the quality of your image for the input source you are currently using. The available settings depend on the currently selected input source.
To change settings for an input source, make sure the source is connected and select that source.
Setting Options
Color Mode
Brightness
Contrast
See the list of available color modes
Varying levels available
Varying levels available
Color Saturation Varying levels available
Tint Varying levels available
Sharpness Varying levels available
Description
Adjusts the vividness of image colors for various image types and environments.
Lightens or darkens the overall image.
Adjusts the difference between light and dark areas of the image.
Adjusts the intensity of the image colors.
Adjusts the balance of green to magenta tones in the image.
Adjusts the sharpness or softness of image details.
171
Setting
Color Temp.
Image
Enhancement
Advanced
Auto Iris
Reset
Options
Color Temp.
Customized
Noise Reduction
RGBCMY
Deinterlacing
(For interlaced signal
[480i/576i/1080i] input)
Off
Normal
High Speed
—
Description
Sets the color tone based on color temperature. The image is tinted blue when a high value is selected and tinted red when a low value is selected.
Color Temp.: sets the color temperature according to the color mode you selected.
Customized: adjusts the individual R
(red), G (green), and B (blue) components of the offset and gain.
Reduces flickering in analog images.
Selects the various detailed color settings:
RGBCMY: adjusts the hue, saturation, and brightness of each color R (red), G
(green), B (blue), C (cyan), M (magenta),
Y (yellow) individually.
Deinterlacing: sets whether or not to convert interlaced-to-progressive signals for certain video image types.
• Off: for fast-moving video images.
• Video: for most video images.
• Film/Auto: for movies, computer graphics, and animation.
Adjusts the projected luminance based on the image brightness.
Available when the Color Mode is set to
Dynamic or Cinema.
This item is disabled when Multi-
Projection is set to On.
s
Extended > Multi-Projection >
Multi-Projection
Resets all adjustment values except Color
Mode on the Image menu to their default settings.
Image Quality Settings - Image Menu a • The Brightness setting does not affect lamp brightness. To change the lamp brightness mode, use the Power Consumption setting in the projector's ECO menu.
g Related Links
• "Available Color Modes" p.68
172
Input Signal Settings - Signal Menu
Normally the projector automatically detects and optimizes the input signal settings. If you need to customize the settings, you can use the Signal menu.
The available settings depend on the currently selected input source.
a You cannot select settings on the Signal menu when the current input source is one of the following:
• USB Display
• USB
• LAN a You can restore the default settings of the Tracking, Sync., and
Position settings by pressing the [Auto] button on the remote control.
To change settings for an input source, make sure the source is connected and select that source.
Setting
Resolution
Options
Auto
Normal
Wide
Description
Sets the input signal resolution if not detected automatically using the Auto option.
Setting
Aspect
Tracking
Sync.
Position
Auto Setup
Overscan
Advanced
173
Options
See the list of available aspect ratios.
Varying levels available
Varying levels available
—
On
Off
Auto
Off
4%
8%
HDMI Video
Range
Input Signal
Description
Sets the aspect ratio (width-to-height ratio) for the selected input source.
Adjusts the signal to eliminate vertical stripes in computer images.
Adjusts the signal to eliminate fuzziness or flickering in computer images.
Adjusts the image location on the screen.
Automatically optimizes computer image quality (when On).
Changes the projected image ratio to make the edges visible by a selectable percentage or automatically.
HDMI Video Range: sets the video range to match the setting of the device connected to the HDMI port.
• Auto: detects the video range automatically.
• Normal: normally for images from a device other than a computer; can also be selected if the black areas of the image are too bright.
• Expanded: normally for images from a computer; can also be selected if the image is too dark.
Input Signal: specifies the signal type from the input sources connected to the computer ports.
• Auto: detects signals automatically.
• RGB: inputs computer/RGB video signals.
• Component: inputs component video signals.
Input Signal Settings - Signal Menu
Setting
Reset
Options
Video Signal
— g Related Links
• "Available Image Aspect Ratios" p.66
Description
Video Signal: specifies the signal type from the input sources connected to the video ports. If interference appears or no image appears when set to Auto, select the appropriate signal according to the connected equipment.
Resets all adjustment values on the
Signal menu to their default settings, except for the following:
• Input Signal
174
Projector Feature Settings - Settings Menu
Options on the Settings menu let you customize various projector features.
Setting
Geometry
Correction
Options
H/V-Keystone
Quick Corner
Arc Correction
Description
Adjusts image shape to rectangular.
H/V-Keystone: select to manually correct horizontal and vertical sides.
Quick Corner: select to correct image shape and alignment using an on-screen display.
Arc Correction: corrects the corners and sides of an image projected on a curved surface.
• Load Memory: loads the settings you made and saved.
• Save Memory: saves the current shape of an image you have adjusted.
175
Setting
Split Screen
(Available when
Connect
ELPCB02* is set to
Off.)
Zoom
Image Shift
Volume
Options
Screen Size
Source
Swap Screens
Audio Source
Align
Pen Mode *
Target Pen Mode *
Display Drawing
Area *
Display the QR
Code
Exit Split Screen
Varying levels available
Varying positions available
Varying levels available
HDMI Link
Device
Connections
HDMI Link
Description
Divides the viewing area horizontally and displays two images side-by-side (press
[Esc] to cancel split screen display).
Adjusts the size of the projected image.
Adjusts the position of the image without moving the projector.
Adjusts the volume of projector’s speaker system.
Setting values are saved for each source.
Adjusts the HDMI Link options:
Device Connections: lists the devices connected to the HDMI ports.
HDMI Link: enables or disables the
HDMI Link features.
Projector Feature Settings - Settings Menu
Setting
Lock Setting
Pointer Shape
Options
Power On Link
Description
Power On Link: controls what happens when you turn on the projector or connected device.
• Bidirectional: automatically turns on the connected device when you turn on the projector, and vice versa.
• Device -> PJ: automatically turns on the projector when you turn on the connected device.
• PJ -> Device: automatically turns on the connected device when you turn on the projector.
Power Off Link
Link Buffer
Power Off Link: controls whether connected devices are turned off when you turn off the projector.
Link Buffer: improves the performance of the linked operations by changing the settings if the HDMI Link function is not working correctly.
Control Panel Lock Controls projector button locking to secure the projector:
Full Lock: locks all buttons.
Partial Lock: locks all buttons except the power button.
Off: no buttons locked.
Pointer 1:
Changes the shape of the remote control pointer.
Pointer 2:
Pointer 3:
176
Setting
Mic Input Level
Options
—
Description
Adjusts the volume of the projector's speaker system when you use a connected microphone:
When Mic Input Level is turned up, the volume of the other connected device is turned down; when it is turned down, the volume of the other connected device is turned up.
Limits reception of remote control signals by the selected receiver; Off turns off all receivers.
Remote Receiver Front/Rear
Front
Rear
Off
User Button Power
Consumption
Info
Deinterlacing
Resolution
Mic Input Level
Pattern Display
Auto Calibration *
Display the QR
Code
Installation Guide
Pattern
Assigns a menu option to the [User] button on the remote control for onetouch access.
Selects various pattern display options.
Pattern Display
Attention
If a pattern is displayed for a long time, a residual image may be visible in projected images.
Pattern Display: lets you display the selected pattern type on the screen to aid in presentation.
Projector Feature Settings - Settings Menu
Setting Options
Pattern Type
User Pattern
Test Pattern
Description
Pattern Type: select from Patterns 1 to 4 or User Pattern. Patterns 1 to 4 display patterns pre-registered in the projector, such as ruled lines or grid patterns.
User Pattern: captures a projected screen and saves it as a pattern for display.
Test Pattern: displays a test pattern to assist in focusing and zooming the image and correcting image shape (press the
[Esc] button to cancel pattern display).
Attention
If a pattern is displayed for a long time, a residual image may be visible in projected images.
Displays a guide screen when installing the projector.
Select the options according to the screen type you will use.
Installation Guide 16:10
4:3
(EB-695Wi/EB-
685Wi/EB-
680Wi/EB-
675Wi/EB-
685W/EB-675W)
—
(EB-680/EB-670)
Reset —
Displays a guide screen when installing the projector.
Resets all adjustment values on the
Settings menu to their default settings, except for the following:
• Zoom
• Image Shift
• Power On Link
• Power Off Link
• Link Buffer
• User Button
* Available only for EB-695Wi/EB-685Wi/EB-680Wi/EB-675Wi.
177
Projector Setup Settings - Extended Menu
Settings on the Extended menu let you customize various projector setup features.
Setting
Easy Interactive
Function *
Home Screen
Display
Options
To Easy Interactive
Function menu
Home Screen Auto
Disp.
Custom Function 1
Custom Function 2
Description
Selects the various projector setup features when using the interactive features.
Selects the projector's Home screen display options:
Home Screen Auto Disp.: select whether or not to display the Home screen automatically when there is no input signal when turning on the projector.
Custom Function 1/Custom Function
2: select to set functions and the display as the customized Home screen.
Selects various display options:
Setting
User's Logo
178
Options
Messages
Display
Background
Description
Messages: set to On to display messages such as input source name, color mode name, aspect ratio, no signal message, or high temperature warning on your projected image. Set to Off if you do not want to display messages.
Display Background: sets the screen color or logo to display when no signal is received.
Startup Screen
A/V Mute
Startup Screen: set to On to display a logo when the projector starts up.
A/V Mute: sets the screen color or logo to display when A/V Mute is turned on.
Color Uniformity Color Uniformity: set to On to adjust the color tone balance for the whole screen.
• Adjustment Level: set the adjustment level.
• Start Adjustments: select the area for which you want to adjust the color tone for red, green, and blue individually.
Toolbars * Toolbars: select whether or not to always display the drawing toolbar when using the interactive features. The default is
Hide for Set Time.
Pen Mode Icon * Pen Mode Icon: set to On to display the icon to change the pen mode when using the interactive features.
Projector Control * Projector Control: set to On to display the bottom toolbar when using the interactive features.
— Creates a screen that the projector displays to identify itself and enhance security.
Projector Setup Settings - Extended Menu
Setting
Projection
Operation
Options
Front
Front/Upside
Down
Rear
Rear/Upside Down
Description
Selects the way the projector faces the screen so the image is oriented correctly.
Selects various operation options:
Direct Power On Direct Power On: lets you turn on the projector by plugging it in without pressing the power button.
High Altitude
Mode
Auto Source Search Auto Source Search: set to On to detect the input signal automatically and project images when there is no input signal.
Auto Power On
High Altitude Mode: regulates the projector’s operating temperature at altitudes above 1500 m.
Auto Power On: select the image source from which you want to automatically start projection. When the projector detects the input signal from the selected image source, it projects automatically in standby mode.
Monitor Out Port Monitor Out Port: changes the input and output for the Computer2/Monitor
Out ports. When outputting images to an external monitor, select Monitor Out.
When inputting image signals from a computer or component video signals from other video sources, select
Computer2.
179
Setting
A/V Settings
Options Description
Connect ELPCB02 Connect ELPCB02: when the optional interface box is connected to the projector, set this to On to project images from the device that is connected to the HDMI3 port. When set to On, the input source switches between HDMI2 and HDMI3 each time you press the
[HDMI2] button on the optional interface box.
Date & Time * Date & Time: adjusts the projector's system time and date settings.
• Daylight Saving Time: set to On to activate daylight saving time.
• Internet Time: set to On to update the time automatically through an Internet time server.
A/V Output
Selects various audio and video output settings:
A/V Output: set to Always On to output audio and images to external devices when the projector is in standby mode.
(Set Standby Mode to Communication
On in the projector's ECO menu first.)
Audio Output
HDMI1 Audio
Output
HDMI2 Audio
Output
HDMI3 Audio
Output
Audio Output: selects the audio input port when projecting images from anything except for HDMI ports.
To use the Audio port, select Audio3 to output the audio.
HDMI1 Audio Output/HDMI2 Audio
Output/HDMI3 Audio Output: selects the audio input port when projecting images from HDMI ports.
To use the Audio port, select Audio3 to output the audio.
Projector Setup Settings - Extended Menu
Setting
USB Type B *
Multi-Projection
Options
Easy Interactive
Function
USB Display/Easy
Interactive
Function
Wireless
Mouse/USB
Display
Description
Easy Interactive Function: select to set the interactive features to operate computers (computer interactive mode).
USB Display and Wireless Mouse functions are not available.
USB Display/Easy Interactive Function: select to set the interactive features to operate computers (computer interactive mode) and USB Display. The Wireless
Mouse function is not available.
Wireless Mouse/USB Display: select to use the Wireless Mouse function and
USB Display. You cannot use the interactive features to operate computers
(computer interactive mode).
Make settings when projecting from multiple projectors:
Multi-Projection Multi-Projection: set to On to match the display quality of multiple projectors.
When set to On, the following are automatically set to prevent unevenness on the right and left screens.
s Image > Auto Iris > Off s ECO > Power Consumption >
Normal
Projector ID
Color Mode
Projector ID: assigns an ID for the projector when you use multiple projectors.
Color Mode: adjusts the vividness of image colors for various image types and environments. When using multiple projectors, make sure you select the same color mode for all of the projectors.
Color Uniformity Color Uniformity: adjusts the color tone balance for the whole screen.
Setting
Language
180
Options
Brightness Level
Color Matching
RGBCMY
Reset
Various languages available
Description
Brightness Level: sets the lamp brightness level between 1 and 5 when the brightness of each lamp differs. This item can be adjusted only when Power
Consumption is set to Normal in the
ECO menu.
Color Matching: corrects the difference between the tint and brightness of each projected image.
RGBCMY: adjusts the Hue, Saturation, and Brightness for R (Red), G (Green), B
(Blue), C (Cyan), M (Magenta), and Y
(Yellow) color components.
Reset: resets all adjustment values for the
Multi-Projection menu to their default settings.
Select the language for projector menu and message displays.
Projector Setup Settings - Extended Menu
Setting
Reset
Options
—
Description
Resets all adjustment values on the
Extended menu to their default settings, except for the following:
• Easy Interactive Function *
• Toolbars *
• Pen Mode Icon *
• Projector Control *
• User's Logo
• Projection
• High Altitude Mode
• Auto Source Search
• Monitor Out Port
• Connect ELPCB02
• Date & Time *
• A/V Output
• USB Type B *
• Multi-Projection
• Projector ID
• Color Mode
• Color Matching
• Language
* Available only for EB-695Wi/EB-685Wi/EB-680Wi/EB-675Wi.
a When you set User's Logo Protection to On in the Password
Protection screen, you cannot change settings related to user's logo display (Display Background, Startup Screen, A/V Mute in the
Display setting). Set User's Logo Protection to Off first.
g Related Links
• "Extended Menu - Easy Interactive Function Menu" p.181
• "Selecting Password Security Types" p.140
181
Extended Menu - Easy Interactive Function Menu
Settings on the Easy Interactive Function menu let you customize various projector setup features when using the interactive features.
g Related Links
General
Settings on the General section let you set various settings when using the interactive features.
s
Extended > Easy Interactive Function > General
Setting Options
Auto Calibration —
Manual Calibration
Touch Unit Setup *
Pen Mode
Hovering
Description
Starts calibration for pen operations.
Selects settings for the Touch unit.
Installation Pattern Installation Pattern: displays reference points to help you determine the installation position of the Touch Unit.
Power Power: turns on the Touch Unit power.
Angle Adjustment Angle Adjustment: performs angle adjustment for laser diffusion.
Touch Calibration Touch Calibration: performs calibration for touch operations with your finger.
PC Free
Annotation
PC Interactive
Selects the mode for the interactive pens.
When set to PC Free Annotation, you can draw on the projected screen. When set to PC Interactive, you can operate a computer from the projected screen.
On
Off
When set to On, the pointer follows the pen tip as you hover it over the screen and move it around.
Projector Setup Settings - Extended Menu
Setting
Advanced
(Advanced section)
Advanced (PC Free
Annotation section)
Options
Distance of
Projectors
Description
Distance of Projectors: select Mode 2. If the distance between the projectors is longer than 2 m, or if the interactive pen operation is unstable in Mode 2, select
Mode 1.
Sync of Projectors Sync of Projectors: if the projectors are connected using the optional remote control cable set, select Wired.
Multi-Projection Multi-Projection: selects the position
(right or left) for each projected screen when you set your projector's interactive features with two projectors installed side by side.
Wired Sync Mode Wired Sync Mode: if the projectors are not connected using the optional remote cable set, or if the interactive pen operation is unstable in Mode 1, select
Mode 2.
Preset Pen
Thickness
Preset Pen Thickness: selects Normal or
Thin as the line thickness from thin width or thick width.
Eraser Size
Color Palette
Eraser Size: selects Normal or Large as the erasable area from thin width or thick width.
Color Palette: allows you to select
Palette 2 if certain colors in the default color palette are difficult to see.
Pen Button
Function
Default Touch
Action
Pen Button Function: sets the function of the button on the side of the interactive pen.
Default Touch Action: allows you to select whether to activate Eraser or PC
Interactive when you switch to annotation mode.
182
Setting Options
Confirm Clear
Screen
Description
Confirm Clear Screen: when set to On, a confirmation screen is displayed before clearing all the content drawn on the projected screen.
* Available only for EB-695Wi/EB-680Wi.
PC Interactive
Settings on the PC Interactive section let you set various settings when you want to operate a computer from the projected screen.
s
Extended > Easy Interactive Function > PC Interactive
Setting
Pen Operation
Mode
Windows/Mac
Mode
Ubuntu Mode
Enable Right Click On
Off
Advanced
Options
Pen Tip Button
Description
Selects the operation mode for interactive pen or your finger according to the operating system on your computer.
Windows/Mac Mode: when using
Windows or Mac.
Ubuntu Mode: when using Ubuntu.
When selecting this mode, you cannot use the Windows' ink functionality using the interactive pen.
When set to On, a long press by the pen tip or finger acts as a right-click operation.
(Only available when Pen Operation
Mode is set to Ubuntu Mode.)
Pen Tip Button: assigns either Right
Click or Left Click to the pen tip.
(Only available when Pen Operation
Mode is set to Ubuntu Mode.)
Projector Setup Settings - Extended Menu
Setting Options
Auto Adjust Pen
Area
Manual Adj. Pen
Area
Description
Auto Adjust Pen Area: when set to On, the pen area is automatically adjusted as the resolution for the connected computer changes. Set to Off if you do not want to automatically adjust the pen area that has been manually adjusted.
Manual Adj. Pen Area: adjusts the pen area manually.
g Related Links
• "Connecting Multiple Projectors of the Same Model" p.35
183
Projector Network Settings - Network Menu
Settings on the Network menu let you view network information and set up the projector for controlling over a network.
When you set Network Protection to On in the Password Protection screen, you cannot change the network settings. Set Network Protection to Off first.
Setting
Wireless Mode
Options
Wireless LAN On
Off
Description
Configures your wireless LAN settings.
Select Wireless LAN On when connecting the projector and a computer over a wireless LAN. If you do not want to connect via wireless LAN, turn it off to prevent unauthorized access by others.
184
Setting
Net. Info. -
Wireless LAN
Net. Info. - Wired
LAN
Display the QR
Code
Options
Connection Mode
Wireless LAN Sys.
Antenna Level
Projector Name
SSID
DHCP
IP Address
Subnet Mask
Gateway Address
MAC Address
Region Code
Projector Name
DHCP
IP Address
Subnet Mask
Gateway Address
MAC Address
—
Printer Settings * IP Address
Quality
Network
Configuration
Paper Size
To additional network menus
Description
Displays wireless network status and details.
Displays wired network status and details.
Displays a QR code for connecting with iOS or Android devices using the Epson iProjection app.
Sets the printer used when printing drawings in the interactive feature.
Configures your network settings.
* Available only for EB-695Wi/EB-685Wi/EB-680Wi/EB-675Wi.
a Once you have connected your projector to your network, you can select projector settings and control projection using a compatible Web browser. This allows you to access the projector remotely.
Projector Network Settings - Network Menu g Related Links
• "Network Menu - Basic Menu" p.185
• "Network Menu - Wireless LAN Menu" p.186
• "Network Menu - Wired LAN Menu" p.187
• "Network Menu - Notifications Menu" p.188
• "Network Menu - Others Menu" p.189
• "Network Menu - Reset Menu" p.189
• "Selecting Password Security Types" p.140
Network Menu - Basic Menu
Settings on the Basic menu let you select the basic network settings.
s
Network > Network Configuration > Basic
185
Setting Options Description
PJLink Password Up to 32 alphanumeric characters
Remote Password Up to 8 alphanumeric characters
(do not use * : spaces)
Web Control
Password
Up to 8 alphanumeric characters
(do not use * : spaces)
Moderator
Password
Enter a password for using the PJLink protocol for projector control.
Enter a password for accessing the projector using the Web Remote. (User name is EPSONREMOTE; default password is guest.)
Enter a password for accessing the projector over the Web. (User name is
EPSONWEB; default password is
admin.)
Four-digit number Enter a password for accessing the projector as a moderator using EasyMP
Multi PC Projection or Epson iProjection. (No password is set by default.)
Projector Keyword On
Off
Display LAN Info. Text & QR Code
Text
Set to On to enable a security password to prevent access to the projector by anyone not in the same room as the projector. You must enter the random keyword displayed from a computer using EasyMP Multi PC Projection or
Epson iProjection to access the projector and share the current screen.
Set the display format for the projector's network information.
By simply reading the QR code with
Epson iProjection, you can connect the mobile device to the projector through a network. The default value is Text & QR
Code.
Setting
Projector Name
Options
Up to 16 alphanumeric characters
(do not use " * + ,
/ : ; < = > ? [ \ ] ` | spaces)
Description
Enter a name to identify the projector over the network.
Projector Network Settings - Network Menu
Network Menu - Wireless LAN Menu
Settings on the Wireless LAN menu let you select the wireless LAN settings.
s
Network > Network Configuration > Wireless LAN
Setting
Connection Mode
Options
Quick
Advanced
Description
Select the type of wireless connection:
Quick: lets you connect to multiple smartphones, tablets, or computers directly using wireless communication.
Use EasyMP Multi PC Projection to connect in this connection mode. The projector acts as an easy access point.
(We recommend limiting the number of devices to six or less to maintain the projection performance.)
Advanced: lets you connect to multiple smartphones, tablets, or computers over a wireless network access point.
186
Setting
SSID
Security
Passphrase
Options
Search Access Point To Search View
Up to 32 alphanumeric characters
Description
Search for available wireless network access points in Advanced connection mode. Depending on the access point settings, they may not be displayed in the list.
Sets the SSID (network name) of the wireless LAN system the projector is connecting to.
Open
WPA2-PSK
Selects the type of security used on the wireless network.
When setting security, follow the instructions from the administrator of the network system you want to connect to.
Open: security is not set.
WPA2-PSK: communication is performed using WPA2 security. Uses
AES method for encryption. When establishing a connection from a computer to the projector, enter the value set in the passphrase.
WPA/WPA2-PSK WPA/WPA2-PSK: connects in WPA personal mode. Encryption method is selected automatically according to the access point settings. Set a passphrase which is the same for the access point.
Various passphrases from 8 to 32 characters
(when entering from a Web browser: various passphrases from 8 to 63 characters)
For WPA2-PSK and WPA/WPA2-PSK security, selects the pre-shared passphrase used on the network.
When the passphrase is entered and the
[Enter] button is pressed, the value is set and displayed as an asterisk (*).
We recommend changing the passphrase periodically for security. If the network settings are initialized, it returns to the initial passphrase.
Projector Network Settings - Network Menu
187
Setting
Channel
IP Settings
SSID Display On
Off
IP Address Display On
Off
Options
1ch
6ch
11ch
DHCP
IP Address
Subnet Mask
Gateway Address
Description
In Quick connection mode, selects the frequency band (channel) used by the wireless LAN.
DHCP: set to On if your network assigns addresses automatically; set to Off to manually enter the network's IP
Address, Subnet Mask, and Gateway
Address using 0 to 255 for each address field.
Do not use these addresses: 0.0.0.0,
127.x.x.x or 224.0.0.0 through
255.255.255.255 (where x is a number from 0 to 255) for IP Address and
Gateway Address and 0.0.0.0 and
255.255.255.255 for Subnet Mask.
Select whether to display the SSID on the network standby screen and Home screen.
Select whether to display the IP address on the network standby screen and
Home screen.
Type of security
When connecting to a wireless network in Advanced connection mode, it is strongly recommended that you set security.
WPA is an encryption standard that improves the security for wireless networks. The projector supports TKIP and AES encryption methods.
WPA also includes user authentication functions. WPA authentication provides two methods: using an authentication server, or authenticating between a computer and an access point without using a server. This projector supports the latter method, without a server.
a For setting details, follow the instructions from your network administrator.
Network Menu - Wired LAN Menu
Settings on the Wired LAN menu let you select the wired LAN settings.
s
Network > Network Configuration > Wired LAN
Setting
IP Settings
Options
DHCP
IP Address
Subnet Mask
Gateway Address
IP Address Display On
Off
Description
DHCP: set to On if your network assigns addresses automatically; set to Off to manually enter the network's IP
Address, Subnet Mask, and Gateway
Address using 0 to 255 for each address field.
Do not use these addresses: 0.0.0.0,
127.x.x.x or 224.0.0.0 through
255.255.255.255 (where x is a number from 0 to 255) for IP Address and
Gateway Address and 0.0.0.0 and
255.255.255.255 for Subnet Mask.
Select whether to display the IP address on the network standby screen.
Projector Network Settings - Network Menu
Network Menu - Notifications Menu
Settings on the Notifications menu let you receive an email notification if a problem or warning occurs in the projector.
s
Network > Network Configuration > Notifications
Setting
SMTP Server
Port Number
Options
Mail Notification On
Off
IP address
1 to 65535 (default is 25)
Description
Set to On to send an email to the preset addresses when a problem or warning occurs with a projector.
Enter the IP address for the projector's
SMTP server using 0 to 255 for each address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Select a number for the SMTP server
Port Number.
188
Setting
From
Address 1 Setting
Address 2 Setting
Address 3 Setting
SNMP
Trap IP Address 1
Trap IP Address 2
Options
Up to 32 alphanumeric characters
Up to 64 alphanumeric characters from the
Web browser
(do not use " ( ) , : ;
< > [ \] spaces)
On
Off
Description
Enter the email address of the sender.
Enter the e-mail address, and select the alerts you want to receive. Repeat for up to 3 addresses.
IP address
Set to On to monitor the projector using
SNMP. To monitor the projector, you need to install the SNMP manager program on your computer. SNMP should be managed by a network administrator.
The default value is Off.
Enter up to two IP addresses to receive
SNMP notifications, using 0 to 255 for each address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Set the SNMP community name.
Community Name Up to 32 alphanumeric characters
(do not use spaces and any symbols other than @)
PJLink Notification On
Off
Enables or disables the PJLink notification function.
Projector Network Settings - Network Menu
Setting Options
Notified IP Address IP address
Description
Enter the IP address to receive the projector's operating status when the
PJLink notification function is enabled.
Enter the addresses using 0 to 255 for each address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Network Menu - Others Menu
Settings on the Others menu let you select other network settings.
s
Network > Network Configuration > Others
189
Setting
AMX Device
Discovery
Crestron
RoomView
Control4 SDDP
Message
Broadcasting
On
Off
On
Off
Options
On
Off
On
Off
Description
Set to On when you want to allow the projector to be detected by AMX Device
Discovery.
Set to On only when monitoring or controlling the projector over the network using Crestron RoomView.
Enabling Crestron RoomView disables the Epson Message Broadcasting feature in the EasyMP Monitor software.
Set to On to allow device information to be acquired using Control4 Simple
Device Discovery Protocol (SDDP).
Set to On to enable EPSON Message
Broadcasting feature.
You can download Message Broadcasting and its Operation Guide from the following Web site.
http://www.epson.com/
Network Menu - Reset Menu
Settings on the Reset menu let you reset all of the network settings.
Setting Options
Priority Gateway Wired LAN
Wireless LAN
Description
You can set the priority gateway.
Projector Network Settings - Network Menu s
Network > Network Configuration > Reset
Setting
Reset network settings.
Options
Yes
No
Description
Select Yes to reset all network settings.
190
Projector Setup Settings - ECO Menu
Settings on the ECO menu let you customize projector functions to save power.
When you select a power-saving setting, a leaf icon appears next to the menu item.
Setting
Power
Consumption
Options
Auto
Normal
Description
Selects the brightness mode of the projector lamp. You cannot select settings when you use your projector at high altitude or in locations subject to high temperatures.
This item is disabled when Multi-
Projection is set to On.
s Extended > Multi-Projection >
Multi-Projection
Auto: sets the projector to sense the optimum lamp brightness needed and adjusts the lamp's brightness accordingly.
This item is enabled only when you install the projector upside-down.
Normal: sets maximum lamp brightness.
191
Setting
Light Optimizer
Options
ECO
ECO2 *
On
Off
Sleep Mode On
Off
Sleep Mode Timer 1 to 30 minutes
A/V Mute Timer On
Off
Description
ECO: reduces lamp brightness and fan noise, and saves power and lamp life.
ECO2: reduces the fan noise to less than
ECO.
When set to On, the lamp brightness is adjusted according to the projected image. This helps to reduce the power consumption by lowering the lamp brightness according to the scene being projected.
The setting is stored for each Color
Mode.
This item is enabled when:
• Power Consumption is set to Normal or Auto.
• Auto Iris is set to Off.
s Image > Auto Iris
• Multi-Projection is set to Off.
s Extended > Multi-Projection >
Multi-Projection
Automatically turns off the projector after an interval of inactivity (when On).
Sets the interval for Sleep Mode.
Automatically turns off the projector after 30 minutes if A/V Mute is enabled
(when On).
Projector Setup Settings - ECO Menu
Setting
Standby Mode
ECO Display
Reset
Options
Communication
On
Communication
Off
On
Off
—
Description
Communication On indicates that the projector can be monitored over a network when the projector is in standby mode. Enable this setting to allow the following operations to occur when the projector is in standby mode:
• Monitor and control the projector over a network
• Output audio and images to an external device (only when A/V
Output is set to Always On)
• Output microphone audio from the projector's speaker (only when A/V
Output is set to Always On) s Extended > A/V Settings > A/V
Output
Displays a leaf icon in the bottom left corner of the projected screen to indicate the power-saving status when the lamp brightness changes (when On).
Resets all adjustment values on the ECO menu to their default settings, except for
Standby Mode.
* Available only for EB-695Wi/EB-685Wi/EB-685W/EB-680.
a • When the Sleep Mode Timer setting is enabled, the lamp dims for a short time before the timer limit is reached and the projector turns off.
g Related Links
• "Projector Setup Settings - Extended Menu" p.178
192
Projector Information Display - Info Menu
You can display information about the projector and version by viewing the
Info menu. However, you cannot change any settings in the menu.
193
Info Menu - Projector Info Menu
You can display information about the projector and input sources by viewing the Projector Info menu in the projector's Info menu.
Information item
Projector Info
Version
Description
Displays the projector information.
Displays the projector's firmware version.
g Related Links
• "Info Menu - Projector Info Menu" p.193
a The available settings depend on the current input source. The lamp usage timer does not register any hours until you have used the lamp for at least 10 hours.
Information item
Lamp Hours
Source
Input Signal
Resolution
Description
Displays the number of hours (H) the lamp has been used in Normal and ECO Power Consumption modes; if the information is displayed in yellow, obtain a genuine Epson replacement lamp soon.
Displays the name of the port to which the current input source is connected.
Displays the input signal setting of the current input source.
Displays the resolution of the current input source.
Projector Information Display - Info Menu
Information item
Video Signal
Refresh Rate
Sync Info
Status
Serial Number
Event ID
Description
Displays the video signal format of the current input source.
Displays the refresh rate of the current input source.
Displays information that may be needed by a service technician.
Displays information about projector problems that may be needed by a service technician.
Displays the projector's serial number.
Displays the Event ID number corresponding to a network problem; see the list of Event ID codes.
g Related Links
Event ID Code List
If the Event ID option on the Info menu displays a code number, check this list of Event ID codes for the solution to the projector problem associated with the code.
If you cannot resolve the problem, contact your network administrator or
Epson for technical support.
Event ID code
0432
0435
0433
0434
0481
0482
0485
0483
04FE
Cause and solution
The network software did not start. Turn the projector off and then on again.
Cannot display the transferred images. Restart the network software.
Unstable network communication. Check the network communication status, wait a few moments, and try connecting to the network again.
The network software quit unexpectedly. Check the network communication status, then turn the projector off and then on again.
194
0892
0893
0894
0898
Event ID code
0484
0479
04FF
0891
0899
Cause and solution
Communication with computer was disconnected. Restart the network software.
A projector system error has occurred. Turn the projector off and then on again.
Cannot find an access point with the same SSID. Set your computer, access point, and projector to the same SSID.
The WPA/WPA2 authentication type does not match. Make sure the wireless network security settings are correct.
The TKIP/AES encryption type does not match. Make sure the wireless network security settings are correct.
Communication with an unauthorized access point was disconnected. Contact your network administrator.
Failed to acquire DHCP. Make sure the DHCP server is operating correctly. If you are not using DHCP, set the DHCP setting to Off in the projector's Network menu.
s
Network > Network Configuration > Wireless LAN > IP
Settings > DHCP
Other communication errors.
Projector Reset Options - Reset Menu
You can reset most of the projector settings to their default values using the
Reset All option on the Reset menu.
You can also reset the projector's lamp usage timer to zero when you replace the lamp using the Reset Lamp Hours option.
You cannot reset the following settings using the Reset All option:
• Input Signal
• Zoom
• Image Shift
• User's Logo
• Color Uniformity
• Color Matching
• Language
• Date & Time
• Network menu items
• Lamp Hours
• Password
195
Copying Menu Settings Between Projectors (Batch Setup)
After selecting the projector's menu settings for one projector, you can use the following methods to copy the settings to other projectors, as long as they are the same model.
• by using a USB flash drive
• by connecting a computer and projector using a USB cable
• by using EasyMP Network Updater
Menu settings such as the following are not copied to the other projector.
• Network menu settings (except for the Notifications menu and the Others menu)
• Lamp Hours and Status from the Info menu a Perform batch setup before adjusting the image settings such as
Keystone. Since image adjustment values are also copied to another projector, the adjustments you made before performing the batch setup are overwritten and the projected screen you adjusted may change.
When copying the menu settings from one projector to another, user's logo is also copied. Do not register the information that you do not want to share between multiple projectors as a user's logo.
Caution
Epson takes no responsibility for batch setup failures and associated repair costs due to power outages, communication errors, or other problems that may cause such failures.
g Related Links
• "Transferring Settings From a USB Flash Drive" p.196
• "Transferring Settings From a Computer" p.197
Transferring Settings From a USB Flash Drive
You can copy menu settings from one projector to another of the same model using a USB flash drive.
196 a The USB flash drive must use a FAT format and not incorporate any security function. Delete any files on the drive before using it for batch setup or the settings may not be saved correctly.
a Disconnect the power cord from the projector, and check that all of the projector's indicators have turned off.
b Connect an empty USB flash drive directly to the projector's USB-A port.
c Hold down the [Esc] button on the remote control or the control panel and connect the power cord to the projector.
d When all of the projector's indicators turn on, release the [Esc] button.
The indicators start flashing and the batch setup file is written to the
USB flash drive. When writing is finished, the projector turns off.
Caution
Do not disconnect the power cord or the USB flash drive from the projector while the file is being written. If the power cord or USB flash drive is disconnected, the projector may not start correctly.
e Remove the USB flash drive.
a The file name for the batch setup file is PJCONFDATA.bin. If you need to change the file name, add text after PJCONFDATA using only alphanumeric characters. If you change the
PJCONFDATA section of the file name, the projector may not be able to recognize the file correctly.
f Disconnect the power cord from the projector to which you want to copy settings, and check that all of the projector's indicators have turned off.
Copying Menu Settings Between Projectors (Batch Setup) g Connect the USB flash drive containing the saved batch setup file to the projector's USB-A port.
h Hold down the [Menu] button on the remote control or the control panel and connect the power cord to the projector.
i j
Transferring Settings From a Computer
You can copy menu settings from one projector to another of the same model by connecting the computer and projector with a USB cable.
a You can use this batch setup method with the following operating system versions:
• Windows Vista and later
• OS X 10.7.x and later a b
When all of the projector's indicators turn on, release the [Menu] button. (The indicators remain on for approximately 75 seconds.)
When all of the indicators start flashing, the settings are being written.
When writing is finished, the projector turns off.
Caution
Do not disconnect the power cord or the USB flash drive from the projector while the file is being written. If the power cord or drive is disconnected, the projector may not start correctly.
Remove the USB flash drive.
Disconnect the power cord from the projector, and check that all of the projector's indicators have turned off.
Connect a USB cable to the computer's USB port and to the projector's
USB-B port.
197 c Hold down the [Esc] button on the remote control or the control panel and connect the power cord to the projector.
d When all of the projector's indicators turn on, release the [Esc] button.
The computer recognizes the projector as a removable disk.
e Open the removable disk icon or folder, and save the batch setup file to the computer.
a The file name for the batch setup file is PJCONFDATA.bin. If you need to change the file name, add text after PJCONFDATA using only alphanumeric characters. If you change the
PJCONFDATA section of the file name, the projector may not be able to recognize the file correctly.
f Eject the USB device (Windows) or drag the removable disk icon to the
Trash (OS X).
g Disconnect the USB cable.
The projector turns off.
h Disconnect the power cord from the projector to which you want to copy settings, and check that all of the projector's indicators have turned off.
i Connect the USB cable to the computer's USB port and to the projector's USB-B port.
j Hold down the [Menu] button on the remote control or the control panel and connect the power cord to the projector.
k When all of the projector's indicators turn on, release the [Menu] button.
The computer recognizes the projector as a removable disk.
Copying Menu Settings Between Projectors (Batch Setup) l Copy the batch setup file (PJCONFDATA.bin) that you saved to your computer to the top level folder of the removable disk.
a Do not copy any files or folders other than the batch setup file to the removable disk.
m Eject the USB device (Windows) or drag the removable disk icon to the
Trash (OS X).
n Disconnect the USB cable.
When all of the indicators start flashing, the settings are being written.
When writing is finished, the projector turns off.
Caution
Do not disconnect the power cord from the projector while the file is being written. If the power cord is disconnected, the projector may not start correctly.
g Related Links
• "Batch Setup Error Notification" p.198
Batch Setup Error Notification
The projector's indicators notify you if an error occurs during a batch setup operation. Check the status of the projector's indicators and follow the instructions described in the table here.
198
Indicator status Problem and solution
The batch setup file may be corrupt, or the USB flash drive or USB cable may not be connected correctly.
Disconnect the USB flash drive or the USB cable, unplug and then plug in the projector's power cord, and then try again.
• Lamp: Orange - flashing fast
• Temp: Orange - flashing fast
Writing the settings may have failed and an error may have occurred in the projector's firmware.
Stop using the projector, remove the power plug from the electrical outlet. Contact Epson for help.
• Power: Blue - flashing fast
• Status: Blue - flashing fast
• Lamp: Orange - flashing fast
• Temp: Orange - flashing fast
Maintaining the Projector
You may need to clean the projector's lens periodically, and clean the air filter and air vents to prevent the projector from overheating due to blocked ventilation.
The only parts you should replace are the lamp, air filter, remote control batteries, interactive pen batteries, and interactive pen tips. If any other part needs replacing, contact Epson or an authorized Epson servicer.
Warning
Before cleaning any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except as specifically explained in this manual. Dangerous electrical voltages in the projector can injure you severely.
g Related Links
• "Cleaning the Projection Window" p.200
• "Cleaning the Obstacle Sensor" p.201
• "Cleaning the Projector Case" p.202
• "Air Filter and Vent Maintenance" p.203
• "Projector Lamp Maintenance" p.207
• "Replacing the Remote Control Batteries" p.212
• "Replacing the Interactive Pen Battery" p.213
• "Replacing the Interactive Pen Tip" p.214
Cleaning the Projection Window
Clean the projection window periodically, or whenever you notice dust or smudges on the surface. To remove dust or smudges, gently wipe the projection window with lens-cleaning paper.
Warning
Do not use a lens cleaner that contains flammable gas. The high heat generated by the projector lamp may cause a fire.
Attention
Do not use glass cleaner or any harsh materials to clean the projection window and do not subject the projection window to any impacts; otherwise, it could be damaged.
200
Cleaning the Obstacle Sensor
Clean the projector's obstacle sensor glass periodically, or if you see a message telling you to remove any obstacles that are interfering with the projection area. To remove dust or smudges, gently wipe the lens with lens-cleaning paper.
Warning
Do not use a lens cleaner that contains flammable gas to clean the obstacle sensor.
The high heat generated by the projector lamp may cause a fire.
Attention
Do not use glass cleaner or any harsh materials to clean the obstacle sensor and do not subject the obstacle sensor to any impacts. Damage on the surface of the sensor may cause malfunctions.
201
Cleaning the Projector Case
Before cleaning the projector case, turn off the projector and unplug the power cord.
• To remove dust or dirt, use a soft, dry, lint-free cloth.
• To remove stubborn dirt, use a soft cloth moistened with water and mild soap. Do not spray liquid directly on the projector.
Attention
Do not use wax, alcohol, benzene, paint thinner, or other chemicals to clean the projector case. These can damage the case. Do not use canned air, or the gases may leave a flammable residue.
202
Air Filter and Vent Maintenance
Regular filter maintenance is important to maintaining your projector. Clean the air filer when a message appears telling you the temperature inside the projector has reached a high level. It is recommended that you clean these parts at least once every three months. Clean them more often than this if you use the projector in a particularly dusty environment.
Attention
If regular maintenance is not performed, your Epson projector will notify you when the temperature inside the projector has reached a high level. Do not wait until this warning appears to maintain your projector filter as prolonged exposure to high temperatures may reduce the life of your projector or lamp.
g Related Links
• "Cleaning the Air Filter" p.203
• "Replacing the Air Filter" p.204
Cleaning the Air Filter
Clean the projector's air filter if it gets dusty, or if you see a message telling you to clean it.
a Turn off the projector and unplug the power cord.
b Slide the air filter cover latch and open the air filter cover.
203
Air Filter and Vent Maintenance c Pull the air filter out of the projector.
204 a Do not rinse the air filter in water, or use any detergent or solvent to clean it.
Attention
Do not use canned air. The gases may leave a flammable residue or push dust and debris into the projector's optics or other sensitive areas.
e Replace the air filter in the projector as shown and push gently until it clicks into place.
d Gently remove the dust using a small vacuum designed for computers or a very soft brush (such as a paintbrush).
f Close the air filter cover.
Replacing the Air Filter
You need to replace the air filter in the following situations:
• After cleaning the air filter, you see a message telling you to clean or replace it
Air Filter and Vent Maintenance
• The air filter is torn or damaged
You can replace the air filter while the projector is mounted to the ceiling or placed on a table.
a b
Turn off the projector and unplug the power cord.
Slide the air filter cover latch and open the air filter cover.
c Pull the air filter out of the projector.
205 a Dispose of used air filters according to local regulations.
• Filter frame: Polypropylene
• Filter: Polypropylene
Air Filter and Vent Maintenance d Place the new air filter in the projector as shown and push gently until it clicks into place.
e Close the air filter cover.
g Related Links
206
Projector Lamp Maintenance
The projector monitors the number of hours the lamp is used and displays this information in the projector's menu system.
Replace the lamp as soon as possible when the following occurs:
• The projected image gets darker or quality declines
• A message is displayed when you turn on the projector telling you to replace the lamp (the message is displayed 100 hours before the expected end of the lamp life and appears for 30 seconds)
• The projector's power indicator is flashing blue and its lamp indicator is flashing orange.
207
Attention
• If you continue to use the lamp after the replacement period has passed, the possibility that the lamp may explode increases. When the lamp replacement message appears, replace the lamp with a new one as soon as possible, even if it is still working.
• Do not repeatedly turn off the power and then immediately turn it back on.
Turning the power on and off frequently may shorten the lamp's operating life.
• Depending on the characteristics of the lamp and the way it has been used, the lamp may become darker or stop working before the lamp warning message appears. You should always have a spare lamp unit ready in case it is needed.
• We recommend the use of genuine Epson replacement lamps. The use of nongenuine lamps may affect projection quality and safety. Any damage or malfunction caused by the use of non-genuine lamps may not be covered by
Epson's warranty.
Projector Lamp Maintenance g Related Links
• "Resetting the Lamp Timer" p.211
• "Projector Specifications" p.241
Replacing the Lamp
You can replace the lamp while the projector is placed on a table or mounted to the ceiling.
Warning
• Let the lamp fully cool before replacing it to avoid injury.
• Never disassemble or modify the lamp. If a modified or disassembled lamp is installed in the projector, it could cause a fire, electric shock, or other damage or injury.
a b c
Turn off the projector and unplug the power cord.
Allow the projector lamp to cool down for at least one hour.
Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp cover.
208
Warning
When replacing the lamp, there is a possibility that the lamp may be broken. If replacing the lamp of a projector which has been installed on the wall or ceiling, you should always assume that the lamp is cracked, and you should stand to the side of the lamp cover, not underneath it. Remove the lamp cover gently. Be careful when removing the lamp cover as shards of glass may fall out and could cause an injury. If any shards of glass get into your eyes or mouth, contact a doctor immediately.
Projector Lamp Maintenance d Slide off the lamp cover.
209 f Grip the lamp handle and carefully pull the lamp out of the projector.
e Loosen the screws securing the lamp to the projector. The screws do not come all the way out.
a • If you notice the lamp is cracked when removing the lamp, replace it with a new lamp, or contact Epson for help.
• The lamp(s) in this product contain mercury (Hg). Check your local laws and regulations regarding disposal or recycling. Do not put in the trash.
Projector Lamp Maintenance g Gently insert the new lamp into the projector. If it does not fit easily, make sure it is facing the right way. Press the handle up.
h Push in the lamp firmly and tighten the screws to secure it.
210
Attention
Do not touch any glass on the lamp assembly to avoid premature lamp failure.
i Replace the lamp cover and tighten the screw to secure it.
Projector Lamp Maintenance a • Make sure the lamp cover is securely installed or the projector will not turn on.
• Do not replace the lamp cover with too much force and make sure the lamp cover is not deformed.
Reset the lamp timer to zero to monitor the new lamp's usage.
g Related Links
Resetting the Lamp Timer
You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement message and to monitor lamp usage correctly.
a Do not reset the lamp timer if you have not replaced the lamp to avoid inaccurate lamp usage information.
a Turn on the projector.
b Press the [Menu] button on the control panel or remote control.
c Select the Reset menu and press [Enter].
d Select Reset Lamp Hours and press [Enter].
You see a prompt asking if you want to reset the lamp hours.
e Select Yes and press [Enter].
f Press [Menu] or [Esc] to exit the menus.
211
Replacing the Remote Control Batteries
The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they run out.
Attention
Make sure you read the Safety Instructions before handling the batteries.
a Remove the battery cover as shown.
212
Warning
Check the positions of the (+) and (–) marks inside the battery holder to ensure the batteries are inserted the correct way. If the batteries are not used correctly, they could explode or leak causing a fire, injury, or damage to the product.
d Replace the battery cover and press it down until it clicks into place.
b Remove the old batteries.
c Insert the batteries with the + and – ends facing as shown.
Replacing the Interactive Pen Battery
The Interactive pen uses one AA manganese battery, AA alkaline battery, or
Eneloop (BK-3MCC) rechargeable battery. Replace the battery as soon as it runs out.
When the battery is low, the pen indicator flashes when you press the button on the side of the pen. When the battery runs out, the pen indicator turns off.
Attention
Make sure you read the Safety Instructions before handling the batteries.
a Remove the battery cover as shown.
Warning
Check the positions of the (+) and (–) marks inside the battery holder to ensure the battery is inserted in the correct direction. If the battery is not used correctly, it could explode or leak causing a fire, injury, or damage to the product.
d Replace the battery cover and press it down until it clicks into place.
213 b c
Remove the old battery.
Insert the battery with the + and – ends facing in the correct direction as shown.
Replacing the Interactive Pen Tip
Two interactive pens come with two types of pen tips, soft tips and hard tips.
The soft pen tips are installed on the pens by default.
• If the soft tip gets dirty or damaged, it becomes less responsive. Replace it with a new one supplied with the product.
• If the soft tip is hard to use on a textured surface, replace it with the hard tip.
a If the hard tip is worn down or damaged, replace it with a new one.
g Related Links
• "Replacing the Soft Pen Tip" p.214
• "Replacing the Soft Pen Tip with the Hard Pen Tip" p.215
• "For Interactive Feature" p.235
Replacing the Soft Pen Tip
a Twist off the tip of the interactive pen to remove it.
b Pull the soft tip straight out.
c Insert the new tip.
d Twist on the pen tip.
214
Replacing the Interactive Pen Tip b Twist on the hard pen tip.
Replacing the Soft Pen Tip with the Hard Pen Tip
a Twist off the tip of the interactive pen to remove it.
215
Solving Problems
Check the solutions in these sections if you have any problems using the projector.
g Related Links
• "Projector Indicator Status" p.218
• "Using the Projector Help Displays" p.220
• "Solving Image or Sound Problems" p.221
• "Solving Projector or Remote Control Operation Problems" p.227
• "Solving Interactive Features Problems" p.229
• "Solving Network Problems" p.232
Projection Problems
If the projector is not working properly, turn it off, unplug it, and then plug it back in and turn it on.
If this does not solve the problem, check the following:
• The indicators on the projector may indicate the problem.
• The solutions in this manual can help you solve many problems.
If none of these solutions help, contact Epson for technical support.
217
Projector Indicator Status
The indicators on the projector indicate the projector status and let you know when a problem occurs. Check the status and color of the indicators and then refer to this table for a solution.
a • If the indicators display a pattern not listed in the table below, turn the projector off, unplug it, and contact Epson for help.
218
Projector status
Indicator and status
Power: Lit blue
Status: Lit blue
Lamp: Off
Temp: Off
Power: Lit blue
Status: Flashing blue
Lamp: Off
Temp: Off
Power: Lit blue
Status: Off
Lamp: Off
Temp: Off
Power: Flashing blue
Status: Off
Lamp: Off
Temp: Off
Power: Flashing blue
Status: Indicator status varies
Lamp: Indicator status varies
Temp: Flashing orange
Problem and solutions
Normal operation.
Warming up or shutting down. When warming up, wait about 30 seconds for an image to appear.
All buttons are disabled during warm-up and shutting down.
Standby, sleep mode, or monitoring.
When you press the power button, projection starts.
Preparing for monitoring and all features are disabled.
Projector is too hot.
• Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects.
• Clean or replace the air filter.
• Make sure the environmental temperature is not too hot.
A
Power indicator
B
Status indicator
C
Lamp indicator
D
Temp (temperature) indicator
Projector Indicator Status
Indicator and status
Power: Off
Status: Flashing blue
Lamp: Off
Temp: Lit orange
Power: Off
Status: Flashing blue
Lamp: Lit orange
Temp: Off
Problem and solutions
Projector has overheated and turned off. Leave it turned off to cool down for 5 minutes.
• Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects.
• Clean or replace the air filter.
• If operating the projector at high altitude, set the High
Altitude Mode setting to On in the projector's
Extended menu.
s Extended > Operation > High Altitude Mode
• If the problem persists, unplug the projector and contact Epson for help.
Lamp has a problem.
• Check to see if the lamp is burned out, broken, or installed incorrectly. Reseat or replace the lamp as necessary.
• Clean the air filter.
• If operating the projector at high altitude, set the High
Altitude Mode setting to On in the projector's
Extended menu.
s
Extended > Operation > High Altitude Mode
• If the problem persists, unplug the projector and contact Epson for help.
Replace the lamp soon to avoid damage. Do not continue using the projector.
Power: Flashing blue
Status: Indicator status varies
Lamp: Flashing orange
Temp: Indicator status varies
Power: Off
Status: Flashing blue
Lamp: Off
Temp: Flashing orange
A fan or sensor has a problem. Turn the projector off, unplug it, and contact Epson for help.
219
Indicator and status
Power: Off
Status: Flashing blue
Lamp: Flashing orange
Temp: Off
Power: Off
Status: Flashing blue
Lamp: Flashing orange
Temp: Flashing orange
Power: Off
Status: Flashing blue
Lamp: Lit orange
Temp: Lit orange
Power: Off
Status: Flashing blue
Lamp: Lit orange
Temp: Lit orange
Problem and solutions
Internal projector error. Turn the projector off, unplug it, and contact Epson for help.
Auto iris error. Turn the projector off, unplug it, and contact Epson for help.
Power error (Ballast). Turn the projector off, unplug it, and contact Epson for help.
Obstacle detection error. A beep sounds, and the message "For safety purposes remove any obstacles blocking the lens." is displayed. The projector turns off automatically if no action is taken.
• Make sure that there are no obstacles interfering with the projection window. Remove any obstacles.
• Clean the obstacle sensor if there are no obstacles.
If the problem persists, turn the projector off, unplug it, and contact Epson for help.
g Related Links
• "Cleaning the Air Filter" p.203
• "Replacing the Air Filter" p.204
Using the Projector Help Displays
You can display information to help you solve common problems using the projector's Help system.
a Turn on the projector.
b Press the [Home] button on the control panel or remote control.
220
The Help menu is displayed.
d Use the up and down arrow buttons to highlight the problem you want to solve.
c Select the icon on the Home screen.
e f
Press [Enter] to view the solutions.
Perform one of the following actions when you are finished.
• To select another problem to solve, press [Esc].
• To exit the help system, press [Menu].
Solving Image or Sound Problems
221
Check the solutions in these sections if you have any problems with projected images or sound.
g Related Links
• "Solutions When No Image Appears" p.221
• "Solutions When Image is Incorrect Using the USB Display Function" p.221
• "Solutions When "No Signal" Message Appears" p.222
• "Solutions When "Not Supported" Message Appears" p.223
• "Solutions When Only a Partial Image Appears" p.223
• "Solutions When the Image is not Rectangular" p.223
• "Solutions When the Image Contains Noise or Static" p.224
• "Solutions When the Image is Fuzzy or Blurry" p.224
• "Solutions When the Image Brightness or Colors are Incorrect" p.224
• "Solutions to Sound Problems" p.225
• "Solutions When Image File Names are not Displayed Correctly in PC Free" p.226
Solutions When No Image Appears
If no image appears, try the following solutions:
• Press the power button to turn the power on.
• Press the [A/V Mute] button on the remote control to see if the image was temporarily turned off.
• Make sure all necessary cables are securely connected and the power is on for the projector and connected video sources.
• Make sure the image being projected is not completely black (only when projecting computer images).
• Make sure the projector's menu settings are correct.
• Press the projector's power button to wake it from standby or sleep mode.
Also, check if the connected computer is in sleep mode or displaying a blank screen saver.
• To project an image source connected to the Monitor Out/Computer2 port, set Monitor Out Port to Computer2 in the projector's Extended menu.
s
Extended > Operation > Monitor Out Port
• Check the settings on the projector's Signal menu to make sure they are correct for the current video source.
• Adjust the Brightness setting in the projector's Image menu.
• Select Normal as the Power Consumption setting.
s
ECO > Power Consumption
• Check the Display setting in the projector's Extended menu to make sure
Messages is set to On.
• If the projector does not respond when you press the control panel buttons, the buttons may be locked for security. Unlock the buttons in the Control
Panel Lock setting in the projector's Settings menu or use the remote control to turn on the projector.
s
Settings > Lock Setting > Control Panel Lock
• If the projector does not respond when you press buttons on the remote control, make sure the remote receivers are turned on.
• For images projected with Windows Media Center, reduce the screen size from full screen mode.
• For images projected from applications using Windows DirectX, turn off
DirectX functions.
• The projector may not be able to project copyrighted videos that you play back on a computer. For more details, see the manual supplied with the computer.
g Related Links
• "Input Signal Settings - Signal Menu" p.173
• "Image Quality Settings - Image Menu" p.171
• "Projector Setup Settings - ECO Menu" p.191
• "Projector Setup Settings - Extended Menu" p.178
• "Unlocking the Projector's Buttons" p.142
Solutions When Image is Incorrect Using the USB
Display Function
If no image appears or if the image appears incorrectly using the USB Display function, try the following solutions:
Solving Image or Sound Problems
• Press the [USB] button on the remote control.
• Make sure the Epson USB Display software has been installed correctly.
Install it manually if necessary.
• For OS X, select the USB Display icon in the Dock folder. If the icon does not appear on the Dock, double-click USB Display in the Applications folder.
If you select Exit from the USB Display icon menu on the Dock, USB
Display does not start automatically when you connect the USB cable.
• For images projected with Windows Media Center, reduce the screen size from full screen mode.
• For images projected from applications using Windows DirectX, turn off
DirectX functions.
• If the mouse cursor flickers, select Make the movement of the mouse
pointer smooth in the Epson USB Display Settings program on your computer.
• Turn off the Transfer layered window setting in the Epson USB Display
Settings program on your computer.
g Related Links
• "Connecting to a Computer for USB Video and Audio" p.27
Solutions When "No Signal" Message Appears
If the "No Signal" message appears, try the following solutions:
• Press the [Source Search] button and wait a few seconds for an image to appear.
• Turn on the connected computer or video source, and press play to begin your presentation, if necessary.
• Check that all cables required for projection are securely connected.
• Connect the video source directly to the projector.
• If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.
• Make sure the connected computer is not in sleep mode.
222
• If necessary, turn off the projector and the connected computer or video source, and then turn them back on.
• If you are projecting from an HDMI source, replace the HDMI cable with the shorter one.
g Related Links
• "Displaying From a Laptop" p.222
• "Displaying From a Mac Laptop" p.222
Displaying From a Laptop
If the message "No Signal" is displayed when projecting from a laptop, you need to set up the laptop to display on an external monitor.
a Hold down the laptop's Fn key and press the key labeled with a monitor icon or CRT/LCD. (See your laptop manual for details.) Wait a few seconds for an image to appear.
b To display on the laptop's monitor and the projector, try pressing the same keys again.
c If the same image is not displayed by the laptop and projector, check the Windows Display utility to make sure the external monitor port is enabled and extended desktop mode is disabled. (See your computer or
Windows manual for instructions.) d If necessary, check your video card settings and set the multiple display option to Clone or Mirror.
Displaying From a Mac Laptop
If the message "No Signal" is displayed when projecting from a Mac laptop, you need to set up the laptop for mirrored display. (See your laptop manual for details.) a Open the System Preferences utility and select Displays.
Solving Image or Sound Problems b Select the Display or Color LCD option, if necessary.
c Click the Arrange or Arrangement tab.
d Select Mirror Displays.
Solutions When "Not Supported" Message Appears
If the message "Not supported" is displayed, try the following solutions:
• Make sure the correct input signal is selected on the projector's Signal menu.
• Make sure the computer's display resolution does not exceed the projector's resolution and frequency limits. If necessary, select a different display resolution for your computer. (See your computer manual for details.) g Related Links
• "Input Signal Settings - Signal Menu" p.173
Solutions When Only a Partial Image Appears
If only a partial computer image appears, try the following solutions:
• Press the [Auto] button on the remote control to optimize the image signal.
• Try adjusting the image position using the Position setting in the projector's Signal menu.
• Press the [Aspect] button on the remote control to select a different image aspect ratio.
• Change the Resolution setting in the projector's Signal menu according to the signal for the connected equipment.
• If you zoomed into or out of the image using the [E-Zoom] buttons, press the [Esc] button until the projector returns to a full display.
• Check your computer display settings to disable dual display and set the resolution within the projector's limits. (See your computer manual for details.)
223
• Check the resolution assigned to your presentation files to see if they are created for a different resolution. (See your software help for details.)
• Make sure you selected the correct projection mode. You can select this using the Projection setting in the projector's Extended menu.
• Perform Image Shift to adjust the image position after adjusting the image size or correcting keystone distortion.
g Related Links
• "Input Signal Settings - Signal Menu" p.173
• "Projector Setup Settings - Extended Menu" p.178
• "Supported Monitor Display Resolutions" p.239
• "Adjusting the Image Position" p.63
Solutions When the Image is not Rectangular
If the projected image is not evenly rectangular, try the following solutions:
• Place the projector directly in front of the center of the screen, facing it squarely, if possible.
• If you adjusted the projector height using the projector feet, press the keystone buttons on the projector to adjust the image shape.
• Adjust the Quick Corner setting to correct the image shape.
s
Settings > Geometry Correction > Quick Corner
• Adjust the Arc Correction setting to correct the image shape projected on a curved surface.
s
Settings > Geometry Correction > Arc Correction g Related Links
• "Correcting the Image Shape with the Keystone Buttons" p.55
• "Correcting the Image Shape with Quick Corner" p.56
• "Correcting Image Shape with Curved Surface" p.58
Solving Image or Sound Problems
224
Solutions When the Image Contains Noise or Static
If the projected image contains electronic interference (noise) or static, try the following solutions:
• Check the cables connecting your computer or video source to the projector. They should be:
• Separated from the power cord to prevent interference
• Securely connected at both ends
• Not connected to an extension cable
• Check the settings on the projector's Signal menu to make sure they match the video source.
• If available for your video source, adjust the Deinterlacing and Noise
Reduction settings in the projector's Image menu.
• Select a computer video resolution and refresh rate that are compatible with the projector.
• If you are projecting from a computer, press the [Auto] button on the remote control to automatically adjust the Tracking and Sync. settings. If the images are not adjusted correctly, manually adjust the Tracking and
Sync. settings in the projector's Signal menu.
• Select Auto as the Resolution setting in the projector's Signal menu.
• If you adjusted the image shape using the projector controls, try decreasing the Sharpness setting in the projector's Image menu to improve image quality.
• If you connected an extension power cable, try projecting without it to see if it caused interference in the signal.
• If you are using the USB Display function, turn off the Transfer layered
window setting in the Epson USB Display Settings program on your computer.
g Related Links
• "Input Signal Settings - Signal Menu" p.173
• "Image Quality Settings - Image Menu" p.171
• "Supported Monitor Display Resolutions" p.239
Solutions When the Image is Fuzzy or Blurry
If the projected image is fuzzy or blurry, try the following solutions:
• Adjust the image focus.
• Clean the projector lens.
a To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it.
• Position the projector close enough to the screen.
• Position the projector so the keystone adjustment angle is not so wide that it distorts the image.
• Adjust the Sharpness setting in the projector's Image menu to improve image quality.
• If you are projecting from a computer, press the [Auto] button on the remote control to automatically adjust the tracking and sync. If any bands or overall blurriness remain, display a uniformly patterned image on the screen and manually adjust the Tracking and Sync. settings in the projector's Signal menu.
• If you are projecting from a computer, use a lower resolution or select a resolution that matches the projector's native resolution.
g Related Links
• "Input Signal Settings - Signal Menu" p.173
• "Image Quality Settings - Image Menu" p.171
• "Supported Monitor Display Resolutions" p.239
• "Cleaning the Projection Window" p.200
Solutions When the Image Brightness or Colors are
Incorrect
If the projected image is too dark or light, or the colors are incorrect, try the following solutions:
Solving Image or Sound Problems
• Press the [Color Mode] button on the remote control to try different color modes for the image and environment.
• Check your video source settings.
• Adjust the available settings on the projector's Image menu for the current input source, such as Brightness, Contrast, Tint, Color Temp., and/or
Color Saturation.
• Make sure you selected the correct Input Signal or Video Signal setting in the projector's Signal menu, if available for your image source.
s s
Signal > Advanced > Input Signal
Signal > Advanced > Video Signal
• Make sure all the cables are securely connected to the projector and your video device. If you connected long cables, try connecting shorter cables.
• If you are using ECO as Power Consumption, try selecting Normal.
s
ECO > Power Consumption a At high altitudes or locations subject to high temperatures, the image may become darker and you may not be able to adjust the Power
Consumption setting.
• Position the projector close enough to the screen.
• If the image has been progressively darkening, you may need to replace the projector lamp soon.
g Related Links
• "Input Signal Settings - Signal Menu" p.173
• "Image Quality Settings - Image Menu" p.171
• "Projector Setup Settings - ECO Menu" p.191
Solutions to Sound Problems
If there is no sound or the volume is too low or high, try the following solutions:
• Adjust the projector's volume settings.
225
• Press the [A/V Mute] button on the remote control to resume video and audio if they were temporarily stopped.
• Check your computer or video source to make sure the volume is turned up and the audio output is set for the correct source.
• Disconnect the audio cable, and then reconnect it.
• Check the audio cable connections between the projector and your video source.
• If you do not hear sound from an HDMI source, set the connected device to
PCM output.
• Make sure any connected audio cables are labeled "No Resistance".
• If you are using the USB Display function, turn on the Output audio from
the projector setting in the Epson USB Display Settings program on your computer.
• Select the correct audio input in the A/V Settings setting in the projector's
Extended menu.
• When you are connecting the projector to a Mac using an HDMI cable, make sure your Mac supports audio through the HDMI port.
• If you want to use a connected audio source when the projector is off, set the Standby Mode option to Communication On in the projector's ECO menu and make sure the A/V Settings options are set correctly in the projector's Extended menu.
• If the volume for the computer is set to the minimum while the projector is set to the maximum, the noise may be mixed. Turn up the computer's volume and turn down the projector's volume. (When you use EasyMP
Multi PC Projection or USB Display.)
• Check the Mic Input Level setting in the projector's Settings menu. If the setting is too high, the sound of other connected devices will be too low.
g Related Links
• "Solutions to Microphone Problems" p.226
• "Projector Connections" p.26
• "Projector Setup Settings - Extended Menu" p.178
• "Projector Setup Settings - ECO Menu" p.191
• "Controlling the Volume with the Volume Buttons" p.72
Solving Image or Sound Problems
Solutions to Microphone Problems
If there is no sound when you use a microphone connected to the projector, try the following solutions:
• Make sure the microphone is securely connected to the projector.
• Make sure you are using a dynamic microphone, not a condenser microphone.
• Adjust the Mic Input Level setting as necessary in the projector's menus.
Solutions When Image File Names are not Displayed
Correctly in PC Free
If any file names are longer than the display area or include unsupported symbols, the file names are shortened or changed in PC Free. Shorten or change the file name.
226
Solving Projector or Remote Control Operation Problems
227
Check the solutions in these sections if you have problems operating the projector or remote control.
g Related Links
• "Solutions to Projector Power or Shut-Off Problems" p.227
• "Solutions to Problems with the Remote Control" p.227
• "Solutions to Password Problems" p.228
• "Solution When "The Battery that Saves Your Clock Settings is Running
Solutions to Projector Power or Shut-Off Problems
If the projector does not turn on when you press the power button or it turns off unexpectedly, try the following solutions:
• Make sure the power cord is securely connected to the projector and to a working electrical outlet.
• The projector's buttons may be locked for security. Unlock the buttons in the Control Panel Lock setting in the projector's Settings menu or use the remote control to turn on the projector.
s
Settings > Lock Setting > Control Panel Lock
• The power cord may be defective. Disconnect the cord and contact Epson for help.
• If the projector's lamp turns off unexpectedly, it may have entered sleep mode after a period of inactivity. Perform any operation to wake the projector. To turn off sleep mode, select Off as the Sleep Mode setting in the projector's ECO menu.
• If the projector's lamp turns off unexpectedly, the A/V mute timer may be enabled. To turn off the A/V mute timer, select Off as the A/V Mute Timer setting in the projector's ECO menu.
• If the projector's lamp turns off, the status indicator is flashing, and the temp (temperature) indicator is lit, the projector has overheated and turned off.
• If the power button on the remote control does not turn on the projector, check its batteries and make sure at least one of the remote receivers are available in the Remote Receiver setting in the projector's Settings menu.
g Related Links
• "Projector Setup Settings - ECO Menu" p.191
• "Projector Indicator Status" p.218
• "Projector Feature Settings - Settings Menu" p.175
• "Unlocking the Projector's Buttons" p.142
Solutions to Problems with the Remote Control
If the projector does not respond to remote control commands, try the following solutions:
• Check that the remote control batteries are installed correctly and have power. If necessary, replace the batteries.
• Make sure you are operating the remote control within the reception angle and range of the projector.
• Make sure the projector is not warming up or shutting down.
• Check to see if a button on the remote control is stuck down, causing it to enter sleep mode. Release the button to wake the remote control up.
• Strong fluorescent lighting, direct sunlight, or infrared device signals may be interfering with the projector's remote receivers. Dim the lights or move the projector away from the sun or interfering equipment.
• Make sure at least one of the remote receivers are available in the Remote
Receiver setting in the projector's Settings menu.
• If the Remote Receiver setting is disabled, hold down the [Menu] button on the remote control for at least 15 seconds to reset the setting to its default.
• If you assigned an ID number to the projector to operate multiple projectors from the remote control, you may need to check or change the ID setting.
• If you lose the remote control, you can order another one from Epson.
g Related Links
• "Remote Control Operation" p.40
• "Projector Feature Settings - Settings Menu" p.175
• "Selecting the Projector You want to Operate" p.130
• "Replacing the Remote Control Batteries" p.212
Solving Projector or Remote Control Operation Problems
Solutions to Password Problems
If you cannot enter or remember a password, try the following solutions:
• You may have turned on password protection without first setting a password. Try entering 0000 using the remote control.
• If you have entered an incorrect password too many times and see a message displaying a request code, write down the code and contact Epson for help. Provide the request code and proof of ownership for assistance in unlocking the projector.
• If you lose the remote control you cannot enter a password. Order a new one from Epson.
Solution When "The Battery that Saves Your Clock
Settings is Running Low" Message Appears
If the message "The battery that saves your clock settings is running low." is displayed, contact Epson for help.
228
Solving Interactive Features Problems
229
Check the solutions in these sections if you have problems using the interactive features (EB-695Wi/EB-685Wi/EB-680Wi/EB-675Wi).
g Related Links
• "Solutions When "Error Occurred in the Easy Interactive Function" Message
• "Solutions When the Interactive Pens Do Not Work" p.229
• "Solutions When Manual Calibration Does Not Work" p.229
• "Solutions When You Cannot Operate a Computer from the Projected
• "Solutions When the Interactive Pen Position Is Not Accurate" p.230
• "Solutions When the Interactive Pens Are Slow or Difficult to Use" p.231
• "Solutions When the Interactive Touch Operation Does Not Work" p.231
Solutions When "Error Occurred in the Easy
Interactive Function" Message Appears
If the "Error occurred in the Easy Interactive Function" message appears, contact Epson for help.
Solutions When the Interactive Pens Do Not Work
If the interactive pens do not work, try the following solutions:
• Make sure you are not covering the black section near the tip of the pen.
• Try holding the pen at a different angle so that your hand is not blocking the signal.
• Press the button on the side of the pen to check the remaining battery power. If the battery indicator does not turn on, replace the battery.
• Make sure the pen tip is securely attached to the pen.
• If the pen tip is worn out or damaged, you may need to replace it.
• Make sure nothing is blocking the signal between the pen and the interactive pen receiver on the projector.
• Make sure the cable cover is in place to keep cables from blocking the signal.
• Dim the room lights and turn off any fluorescent lights. Make sure the projection surface and pen receiver are not in direct sunlight or other sources of bright lighting.
• Make sure the interactive pen receiver on the projector is clean and free from dust.
• Make sure there is no interference from infrared remote controls, mice, or infrared microphones.
• Make sure you perform pen calibration when using the interactive pen for the first time so that the projector recognizes the position of the pen correctly.
• Make sure Pen Mode and Pen Operation Mode settings are set correctly in the Easy Interactive Function options on the Extended menu.
• When using multiple projectors and interactive pens in the same room, interference may cause pen operations to become unstable. Connect the optional remote control cable set. If you do not have a remote control cable set, change the Distance of Projectors setting in the projector's Extended menu.
s
Extended > Easy Interactive Function > General > Advanced >
Distance of Projectors
• Try replacing the soft pen tip with the hard pen tip. Doing so may improve pen operations because some of the projector models do not support the soft pen tip.
g Related Links
• "Replacing the Interactive Pen Tip" p.214
• "Projector Setup Settings - Extended Menu" p.178
• "Replacing the Interactive Pen Battery" p.213
Solutions When Manual Calibration Does Not Work
If you are having trouble calibrating manually, try the following solutions:
Solving Interactive Features Problems
230
• Make sure the projector is not too close to the projection surface.
• Move the projector or turn off the interfering device, such as a light source that is emitting infrared rays.
Solutions When You Cannot Operate a Computer from the Projected Screen
If you cannot operate a computer from the projected screen, try the following solutions:
• Make sure the USB Type B option on the Extended menu is set to Easy
Interactive Function or USB Display/Easy Interactive Function.
• Make sure you perform pen calibration when using the interactive pen for the first time so that the projector recognizes the position of the pen correctly.
• Press the [Pen Mode] button on the remote control to select PC Interactive as the Pen Mode setting. You can also select the Pen Mode setting from the projector's Extended menu.
s
Extended > Easy Interactive Function > Pen Mode
• Make sure the USB cable is securely connected. Disconnect the USB cable, and then reconnect it.
• When projecting an image using two projectors installed side by side, you need to select the Multi-Projection setting to use the interactive features.
You also need to install Easy Interactive Driver Ver. 4.0 from the Epson
Projector Software for Easy Interactive Function CD-ROM on the computer that you want to operate from the projected screen.
s
Extended > Easy Interactive Function > Advanced > Multi-Projection
• When projecting an image with only one of the two projectors installed side by side, you may not be able to operate a computer from the projected screen. Select the
single projector to On.
icon on the Home screen, and then set Use this g Related Links
• "Projector Setup Settings - Extended Menu" p.178
Solutions When the Interactive Pen Position Is Not
Accurate
If the pen position is not the same as the mouse pointer, try the following solutions:
• Make sure you perform pen calibration when using the interactive pen for the first time so that the projector recognizes the position of the pen correctly. If the cursor location and pen position do not match after auto calibration, you can calibrate manually.
• Make sure the cable cover is in place to keep cables from blocking the signal.
• Try adjusting the pen operation area.
• If you use the [E-Zoom] + button on the remote control to enlarge the image, the pen position is not accurate. When you return the image to the original size, the position should be correct.
• If you set Pen Mode to PC Interactive in the projector's Extended menu, set Auto Adjust Pen Area to Off, and then select Manual Adj. Pen Area.
s
Extended > Easy Interactive Function > General > Advanced > Auto
Adjust Pen Area s
Extended > Easy Interactive Function > General > Advanced >
Manual Adj. Pen Area
• Try changing the computer's resolution to 1280 × 800.
g Related Links
• "Projector Setup Settings - Extended Menu" p.178
• "Adjusting the Pen Operation Area" p.93
Solving Interactive Features Problems
Solutions When the Interactive Pens Are Slow or
Difficult to Use
If the pens are difficult to use or respond too slowly, try the following solutions:
• For easier operation, hold the pen perpendicular to the projection surface.
• For the best performance, connect your computer to the projector using a
VGA or HDMI cable for display and the USB cable for the interactive features.
• If you are using USB Display in Windows, you may need to disable
Windows Aero in the Epson USB Display Settings program on your computer.
g Related Links
• "Projector Connections" p.26
Solutions When the Interactive Touch Operation
Does Not Work
If the interactive touch operation using your finger does not work, try the following solutions (EB-695Wi/EB-680Wi):
• Make sure the Touch Unit is installed correctly and the power cable is properly connected. See your projector's Installation Guide for details.
• If the indicator on the Touch Unit is not on, check that Touch Unit Setup -
Power is set to On in the projector's Extended menu.
• Adjust the angle on the Touch Unit. See your projector's Installation Guide for details.
• Make sure there are no obstacles (such as cables or pen trays) between the
Touch Unit's laser diffusion port and the projection surface. If there are any obstacles that are difficult to move, attach the infrared deflectors to the projection surface. See your projector's Installation Guide for details.
• Make sure there is no interference from infrared remote controls, mice, or infrared microphones.
231
• If your finger position and the cursor position on the screen do not match, perform Touch Calibration in the projector's Extended menu.
• If there are any people within 10 cm in front of or around the projection screen or any obstacles causing interference, the touch operations may not work properly.
• If clothing, or any part of your body comes close to the screen, the touch operations may not work properly. Move at least 1 cm away from the screen.
• If touch operations do not work correctly even after performing calibration, press the setting.
icon on the Home screen to check the Calibration Range
• If touch operations are mistakenly recognized as dragging operations, select Wide.
• If mouse operations are not performed smoothly, select Narrow.
g Related Links
• "Projector Setup Settings - Extended Menu" p.178
• "Using Interactive Touch Operations with Your Finger" p.80
Solving Network Problems
232
Check the solutions in these sections if you have problems using the projector on a network.
g Related Links
• "Solutions When You Cannot Access the Projector Through the Web" p.232
• "Solutions When Network Alert E-Mails are not Received" p.232
• "Solutions When the Image Contains Static During Network Projection" p.232
Solutions When You Cannot Access the Projector
Through the Web
If you are unable to access the projector through a Web browser, make sure you are using the correct ID and password.
• To display the Web Control screen, enter EPSONWEB as the user ID. (You cannot change the user ID.)
• To display the Web Remote screen, enter EPSONREMOTE as the user ID.
(You cannot change the user ID.)
• For the password, enter the password set in the projector's Network menu.
The default password is admin.
s s
Network > Network Configuration > Basic > Web Control Password
Network > Network Configuration > Basic > Remote Password
• Make sure you have access to the network the projector is on.
• If your Web browser is set up to connect via a proxy server, the Web
Control screen cannot be displayed. Make settings for a connection without using a proxy server.
a The user ID and password are case sensitive.
g Related Links
• "Network Menu - Basic Menu" p.185
Solutions When Network Alert E-Mails are not
Received
If you do not receive an e-mail alerting you to problems with a projector over the network, try the following solutions:
• Make sure the projector is turned on and connected to the network correctly. (If an error shuts down the projector, the email may not be delivered.)
• Make sure you set up the projector e-mail alert settings correctly on the projector's network Notifications menu or in the network software.
• Set the Standby Mode setting to Communication On in the projector's
ECO menu so the network software can monitor the projector in standby mode.
• Make sure your electrical outlet or power source is functioning correctly.
g Related Links
• "Network Menu - Notifications Menu" p.188
Solutions When the Image Contains Static During
Network Projection
If the projected image contains static during network projection, try the following solutions:
• Check for any obstacles between the access point, the computer, the mobile device, and the projector, and change their positions to improve communication.
• Make sure that the access point, the computer, the mobile device and the projector are not too far apart. Move them closer together and try to connect again.
• If the wireless connection is slow or your projected image contains noise, check for interference from other equipment, such as a Bluetooth device or microwave. Move the interfering device farther away or expand your wireless bandwidth.
Solving Network Problems
• Reduce the number of connected devices if the connection speed declines.
233
Appendix
Check these sections for the technical specifications and important notices about your projector.
g Related Links
• "Optional Accessories and Replacement Parts" p.235
• "Screen Size and Projection Distance" p.237
• "Supported Monitor Display Resolutions" p.239
• "Projector Specifications" p.241
• "USB Display System Requirements" p.245
• "Easy Interactive Driver System Requirements" p.246
• "List of Safety Symbols (corresponding to IEC60950-1 A2)" p.247
Optional Accessories and Replacement Parts
235
The following optional accessories and replacement parts are available. Please purchase these products as and when needed.
The following list of optional accessories and replacement parts is current as of: September 2016.
Details of accessories are subject to change without notice and availability may vary depending on the country of purchase.
g Related Links
• "For Interactive Feature" p.235
• "For Wireless Connection" p.235
Cables
Computer cable ELPKC02 (1.8 m - for mini D-sub 15-pin/mini D-Sub
15pin)
Computer cable ELPKC09 (3 m - for mini D-sub 15-pin/mini D-Sub
15pin)
Computer cable ELPKC10 (20 m - for mini D-sub 15-pin/mini D-Sub
15pin)
Use when connecting to the Computer port.
Component video cable ELPKC19 (3 m - for mini D-Sub 15-pin/RCA male x 3)
Use when connecting to a component video source.
Remote Control Cable Set ELPKC28
Use when connecting multiple projectors that support the interactive feature.
USB Extension cable ELPKC31
Use when connecting to a USB cable if the cable is too short.
Mounts
Setting plate ELPMB46
Use when installing the projector on a wall.
Ceiling mount ELPMB23
Use when installing the projector on a ceiling.
Ceiling pipe (450 mm) ELPFP13
Ceiling pipe (700 mm) ELPFP14
Use when installing the projector on a high ceiling.
Interactive Table Mount ELPMB29
Use when installing the projector on a table.
a Special expertise is required to suspend the projector from a ceiling.
Contact Epson for help.
For Interactive Feature
Interactive Pen ELPPN05A
Interactive Pen ELPPN05B
Use when operating the computer screen on the projection surface.
Replacement Hard Pen Tips ELPPS03
Replacement Soft Pen Tips ELPPS04
Replacement pen tips for the interactive pen.
For Wireless Connection
Wireless LAN module ELPAP10
Use this to project images from a computer via a wireless communication.
(Frequency band: 2.4GHz)
Optional Accessories and Replacement Parts
External Devices
Document Camera ELPDC21
Use when projecting image such as books, OHP documents, or slides.
External Speaker ELPSP02
External self-powered speaker.
Interface box ELPCB02
When the projector is mounted on a wall or suspended from a ceiling, install the remote control to operate the projector at hand.
Replacement Parts
Lamp unit ELPLP90 (EB-680Wi/EB-675Wi/EB-675W/EB-670)
Lamp unit ELPLP91 (EB-695Wi/EB-685Wi/EB-685W/EB-680)
Use as a replacement for used lamps.
Air filter ELPAF49
Use as a replacement for used air filters.
236
Screen Size and Projection Distance
Check the table here to determine how far to place the projector from the screen based on the size of the projected image.
A
Projection distance (cm)
B
Distance from the projector to the top of the screen (when mounting on a wall or ceiling, or installing vertically) (cm)
Distance from the projector to the bottom of the screen (when placing on a surface such as a desk) (cm)
237
C
Distance from the projector to the bottom of the screen (when mounting on a wall or ceiling, or installing vertically) (cm)
Distance from the projector to the top of the screen (when placing on a surface such as a desk) (cm)
WXGA (EB-695Wi/EB-685Wi/EB-680Wi/EB-675Wi)
16:10 screen size
60"
70"
80"
90"
100"
129 × 81
151 × 94
172 × 108
194 × 121
215 × 135
A
Minimum (Wide) to
Maximum (Tele)
35.4 - 48.4
41.6 - 56.7
47.7 - 60.1
53.9 - 60.1
60.1
B
Minimum
(Wide)
8.7
11.5
14.3
17.1
19.9
C
Minimum
(Wide)
89.5
105.8
122.0
138.3
154.6
WXGA (EB-685W/EB-675W)
16:10 screen size
60"
70"
80"
90"
100"
129 × 81
151 × 94
172 × 108
194 × 121
215 × 135
A
Minimum (Wide) to
Maximum (Tele)
35.4 - 48.4
41.6 - 56.7
47.7 - 60.1
53.9 - 60.1
60.1
B
Minimum
(Wide)
8.7
11.5
14.3
17.1
19.9
C
Minimum
(Wide)
89.5
105.8
122.0
138.3
154.6
4:3 screen size
53" 108 × 81
A
Minimum (Wide) to
Maximum (Tele)
35.4 - 48.4
B
Minimum
(Wide)
8.7
C
Minimum
(Wide)
89.5
Screen Size and Projection Distance
60"
70"
80"
88"
4:3 screen size
122 × 91
142 × 107
163 × 122
179 × 134
A
Minimum (Wide) to
Maximum (Tele)
40.3 - 55.0
47.3 - 60.1
54.3 - 60.1
60.1
80"
90"
97"
59"
60"
70"
16:9 screen size
131 × 74
133 × 75
155 × 87
177 × 100
199 × 112
215 × 121
A
Minimum (Wide) to
Maximum (Tele)
35.8 - 48.9
36.4 - 49.8
42.8 - 58.3
49.1 - 60.1
55.5 - 60.1
59.9 - 60.1
XGA (EB-680/EB-670)
4:3 screen size
56"
60"
70"
80"
90"
92"
114 × 85
122 × 91
142 × 107
163 × 122
183 × 137
187 × 140
A
Minimum (Wide) to
Maximum (Tele)
35.7 - 48.7
38.4 - 52.3
45.0 - 60.1
51.6 - 60.1
58.2 - 60.1
59.6 - 60.1
B
Minimum
(Wide)
6.5
7.5
10.1
12.7
15.3
15.8
B
Minimum
(Wide)
10.9
14.1
17.3
19.8
B
Minimum
(Wide)
13.0
13.3
16.9
20.5
24.1
26.6
C
Minimum
(Wide)
91.8
98.9
116.8
134.6
152.5
156.0
C
Minimum
(Wide)
102.4
120.8
139.2
153.9
C
Minimum
(Wide)
86.5
88.1
104.1
120.1
136.1
147.4
238
52"
60"
70"
80"
85"
16:9 screen size
115 × 65
133 × 75
155 × 87
177 × 100
188 × 106
A
Minimum (Wide) to
Maximum (Tele)
36.1 - 49.3
41.9 - 57.1
49.1 - 60.1
56.4 - 60.1
60.0 - 60.1
B
Minimum
(Wide)
17.4
21.4
26.3
31.2
33.6
C
Minimum
(Wide)
82.2
96.1
113.4
130.8
139.5
Supported Monitor Display Resolutions
The table here lists the compatible refresh rate and resolution for each compatible video display format.
Component Signals (Analog RGB)
Signal
VGA
SVGA
XGA
WXGA
WXGA+
WXGA++
SXGA
SXGA+
WSXGA+ *
UXGA
Refresh rate (Hz)
60/72/75/85
60/72/75/85
60/70/75/85
60
60
60/75/85
60/75/85
60
70/75/85
60/75/85
60/75/85
60/75
60
60
Resolution (dots)
640 × 480
800 × 600
1024 × 768
1280 × 768
1366 × 768
1280 × 800
1440 × 900
1600 × 900
1152 × 864
1280 × 960
1280 × 1024
1400 × 1050
1680 × 1050
1600 × 1200
* WSXGA+ is available only for EB-695Wi/EB-685Wi/EB-680Wi/EB-
675Wi/EB-685W/EB-675W and compatible only when Wide is selected as the
Resolution setting in the projector's Signal menu.
Even when signals other than those mentioned above are input, it is likely that the image can be projected. However, not all functions may be supported.
Component Video
Signal
SDTV (480i/480p)
SDTV (576i/576p)
Refresh rate (Hz)
60
50
Resolution (dots)
720 × 480
720 × 576
Signal
HDTV (720p)
HDTV (1080i)
Composite Video
Signal
TV (NTSC)
TV (SECAM)
TV (PAL)
HDMI Input Signal
Signal
VGA
SVGA
XGA
WXGA
WXGA+
WXGA++
UXGA
WSXGA+ *
SXGA
SXGA+
SDTV (480i/480p)
SDTV (576i/576p)
HDTV (720p)
HDTV (1080i)
Refresh rate (Hz)
50/60
50/60
Refresh rate (Hz)
60
50
50/60
Refresh rate (Hz)
60
60
60
60
60
60
60
60
60
50
50/60
50/60
60
60
60
60
Resolution (dots)
1280 × 720
1920 × 1080
239
Resolution (dots)
720 × 480
720 × 576
720 × 576
Resolution (dots)
640 × 480
800 × 600
1024 × 768
1280 × 800
1366 × 768
1440 × 900
1600 × 900
1600 × 1200
1680 × 1050
1280 × 960
1280 × 1024
1400 × 1050
720 × 480
720 × 576
1280 × 720
1920 × 1080
Supported Monitor Display Resolutions
Signal
HDTV (1080p)
Refresh rate (Hz)
24/30/50/60
Resolution (dots)
1920 × 1080
* Available only for EB-695Wi/EB-685Wi/EB-680Wi/EB-675Wi/EB-
685W/EB-675W.
MHL Input Signal
Signal
VGA
SDTV (480i/480p)
SDTV (576i/576p)
HDTV (720p)
HDTV (1080i)
HDTV (1080p)
Refresh rate (Hz)
60
60
50
50/60
50/60
24/30
Resolution (dots)
640 × 480
720 × 480
720 × 576
1280 × 720
1920 × 1080
1920 × 1080
240
Projector Specifications
Product name
Dimensions
LCD panel size
Display method
Resolution
Focus adjustment
Zoom adjustment
Lamp
Lamp life
Max. audio output
EB-695Wi/EB-685Wi/EB-680Wi/EB-675Wi/EB-
685W/EB-675W/EB-680/EB-670
367 (W) × 149 (H) × 400 (D) mm (not including raised section)
EB-695Wi/EB-685Wi/EB-680Wi/EB-675Wi/EB-
685W/EB-675W:
0.59"
EB-680/EB-670:
0.55"
Poly-silicon TFT active matrix
EB-695Wi/EB-685Wi/EB-680Wi/EB-675Wi/EB-
685W/EB-675W:
1,024,000 pixels
WXGA (1,280 (W) x 800 (H) dots) x 3
EB-680/EB-670:
786,432 pixels
XGA (1,024 (W) × 768 (H) dots) × 3
Manual
1.0 - 1.35 (Digital Zoom)
EB-695Wi/EB-685Wi/EB-685W/EB-680:
UHE lamp, 250 W Model No.: ELPLP91
EB-680Wi/EB-675Wi/EB-675W/EB-670:
UHE lamp, 215 W Model No.: ELPLP90
EB-695Wi/EB-685Wi/EB-685W/EB-680:
• Normal Power Consumption mode: Up to 5,000 hours
• ECO Power Consumption mode: Up to 10,000 hours
• ECO2 Power Consumption mode: Up to 9,000 hours
EB-680Wi/EB-675Wi/EB-675W/EB-670:
• Normal Power Consumption mode: Up to 5,000 hours
• ECO Power Consumption mode: Up to 10,000 hours
16W
241
Speaker
Power supply
Power consumpt ion
100 to 120 V area
220 to 240 V area
Operating altitude
Operating temperature
Storage temperature
1
EB-695Wi/EB-685Wi/EB-685W/EB-680:
100-240V AC±10% 50/60Hz 3.8 - 1.7 A
EB-680Wi/EB-675Wi/EB-675W/EB-670:
100-240V AC±10% 50/60Hz 3.4 - 1.5 A
EB-695Wi/EB-685Wi/EB-685W/EB-680:
Operating: 373 W
Standby power consumption (Communication On): 2.2
W
Standby power consumption (Communication Off):
0.23 W
EB-680Wi/EB-675Wi/EB-675W/EB-670:
Operating: 333 W
Standby power consumption (Communication On): 2.2
W
Standby power consumption (Communication Off):
0.23 W
EB-695Wi/EB-685Wi/EB-685W/EB-680:
Operating: 354 W
Standby power consumption (Communication On): 2.3
W
Standby power consumption (Communication Off):
0.37 W
EB-680Wi/EB-675Wi/EB-675W/EB-670:
Operating: 317 W
Standby power consumption (Communication On): 2.3
W
Standby power consumption (Communication Off):
0.37 W
Altitude 0 to 3,000 m
+5 to +40°C* (No condensation) (Altitude 0 to 2,286 m)
+5 to +35°C* (No condensation) (Altitude 2,287 to
3,000 m)
-10 to +60°C (No condensation)
Projector Specifications
Mass EB-695Wi/EB-685Wi/EB-680Wi/EB-675Wi:
Approx. 5.8 kg
EB-685W/EB-675W/EB-680/EB-670:
Approx. 5.7 kg
* If the surrounding temperature gets too high, the brightness is automatically dimmed.
This product is also designed for IT power distribution system with phase-tophase voltage 230V.
Angle of tilt
If you use the projector tilted at an angle of more than 3Ëš it could be damaged and cause an accident.
g Related Links
• "Connector Specifications" p.242
Connector Specifications
Computer1 port 1 Mini D-Sub15-pin (female)
Computer2/Monitor Out port
Video port
Audio 1 port
Audio 2 port
Audio port
Mic port
Audio Out port
HDMI1/MHL port
1
1
1
1
1
1
1
1
HDMI2 port
HDMI3 port
USB-A port
USB-B port
USB port (for Wireless
LAN module)
LAN port
RS-232C port
SYNC port
TCH port (EB-695Wi/EB-
680Wi)
1
1
1
1
1
2
1
1
1
Mini D-Sub15-pin (female)
RCA pin jack stereo mini pin jack stereo mini pin jack stereo mini pin jack stereo mini pin jack stereo mini pin jack
HDMI (Audio is only supported by
PCM)
HDMI (Audio is only supported by
PCM)
HDMI (Audio is only supported by
PCM)
USB connector (Type A)
USB connector (Type B)
USB connector (Type A)
RJ-45
Mini D-Sub 9-pin (male)
Stereo mini pin jack
Mini DIN 8-pin a • USB-A and USB-B port supports USB 2.0. However, USB ports are not guaranteed to operate all devices that support USB.
• USB-B port is not support USB 1.1.
242
External Dimensions
243
Without feet
External Dimensions
With feet
The unit in these illustrations is mm.
244
USB Display System Requirements
To use the projector's Epson USB Display software, your computer must meet the following system requirements.
Requirement Windows
Operating system Windows Vista
• Ultimate (32-bit)
• Enterprise (32-bit)
• Business (32-bit)
• Home Premium (32-bit)
• Home Basic (32-bit)
Windows 7
• Ultimate (32- and 64-bit)
• Enterprise (32- and 64-bit)
• Professional (32- and 64-bit)
• Home Premium (32- and 64bit)
• Home Basic (32-bit)
• Starter (32-bit)
Windows 8
• Windows 8 (32- and 64-bit)
• Windows 8 Pro (32- and 64bit)
• Windows 8 Enterprise (32and 64-bit)
Windows 8.1
• Windows 8.1 (32- and 64-bit)
• Windows 8.1 Pro (32- and 64bit)
• Windows 8.1 Enterprise (32and 64-bit)
Mac
OS X
• 10.7.x (32- and 64-bit)
• 10.8.x (64-bit)
• 10.9.x (64-bit)
• 10.10.x (64-bit)
• 10.11.x (64-bit)
Requirement
CPU
Memory
Windows
Windows 10
• Windows 10 Home (32- and
64-bit)
• Windows 10 Pro (32- and 64bit)
• Windows 10 Enterprise (32and 64-bit)
Intel Core2Duo or faster
(Intel Core i3 or faster recommended)
2GB or more
(4GB or more recommended)
Mac
Intel Core2Duo or faster
(Intel Core i5 or faster recommended)
Hard disk space 20 MB or more
Display Resolution between 640 × 480 and 1920 × 1200
16-bit color or greater a Operation is not guaranteed for Windows Vista without any service packs installed, or Windows Vista Service Pack 1.
245
Easy Interactive Driver System Requirements
To use computer interactive mode, you must install the Easy Interactive
Driver on your computer. Check the system requirements necessary to run the software.
Requirement Windows
Operating system Windows 7
• Ultimate (32- and 64-bit)
• Enterprise (32- and 64-bit)
• Professional (32- and 64-bit)
• Home Premium (32- and 64bit)
• Home Basic (32-bit)
Windows 8
• Windows 8 (32- and 64-bit)
• Windows 8 Pro (32- and 64bit)
• Windows 8 Enterprise (32and 64-bit)
Windows 8.1
• Windows 8.1 (32- and 64-bit)
• Windows 8.1 Pro (32- and 64bit)
• Windows 8.1 Enterprise (32and 64-bit)
Windows 10
• Windows 10 Home (32- and
64-bit)
• Windows 10 Pro (32- and 64bit)
• Windows 10 Enterprise (32and 64-bit)
CPU Core2 Duo 1.2 GHz or faster
(Core i3 or faster recommended)
Mac
OS X
• OS X 10.7.x (32- and 64bit)
• OS X 10.8.x (64-bit)
• OS X 10.9.x (64-bit)
• OS X 10.10.x (64-bit)
• OS X 10.11.x (64-bit)
Core2 Duo 1.2 GHz or faster
(Core i5 or faster recommended)
246
Requirement Windows
Memory 1 GB or more
Recommended: 2 GB or more
Hard disk space 100 MB or more
Display Resolutions no lower than XGA
(1024 x 768) and no higher than
WUXGA (1920 x 1200)
16-bit color or greater
Mac
1 GB or more
Recommended: 2 GB or more
100 MB or more
Resolutions no lower than
XGA (1024 x 768) and no higher than WUXGA (1920 x
1200)
16-bit color or greater
List of Safety Symbols (corresponding to IEC60950-1 A2)
The following table lists the meaning of the safety symbols labeled on the equipment.
No. Symbol mark Description
A
Approved standards
IEC60417
No.5007
"ON" (power)
To indicate connection to the mains.
B
IEC60417
No.5008
C
D
E
F
G
H
IEC60417
No.5009
ISO7000
No.0434B,
IEC3864-B3.1
IEC60417
No.5041
IEC60417
No.6042
ISO3864-B3.6
IEC60417
No.5957
IEC60417
No.5926
"OFF" (power)
To indicate disconnection from the mains.
Stand-by
To identify the switch or switch position by means of which part of the equipment is switched on in order to bring it into the stand-by condition.
Caution
To identify general caution when using the product.
Caution, hot surface
To indicate that the marked item can be hot and should not be touched without taking care.
Caution, risk of electric shock
To identify equipment that has risk of electric shock.
For indoor use only
To identify electrical equipment designed primarily for indoor use.
Polarity of d.c. power connector
To identify the positive and negative connections (the polarity) on a piece of equipment to which a d.c. power supply may be connected.
No. Symbol mark
I
J
Approved standards
—
IEC60417
No.5001B
K
L
M
N
O
P
IEC60417
No.5002
—
IEC60417
No.5019
IEC60417
No.5017
IEC60417
No.5032
IEC60417
No.5031
247
Description
The same as No.8.
Battery, general
On battery powered equipment. To identify a device for instance a cover for the battery compartment, or the connector terminals.
Positioning of cell
To identify the battery holder itself and to identify the positioning of the cell(s) inside the battery holder.
The same as No.11.
Protective earth
To identify any terminal which is intended for connection to an external conductor for protection against electric shock in case of a fault, or the terminal of a protective earth electrode.
Earth
To identify an earth (ground) terminal in cases where neither the symbol
No.13 is explicitly required.
Alternating current
To indicate on the rating plate that the equipment is suitable for alternating current only; to identify relevant terminals.
Direct current
To indicate on the rating plate that the equipment is suitable for direct current only; to identify relevant terminals.
List of Safety Symbols (corresponding to IEC60950-1 A2)
T
U
V
X
Y
No. Symbol mark
Q
Approved standards
IEC60417
No.5172
R
ISO 3864
S
ISO 3864
W
—
—
ISO3864
IEC60825-1
ISO 3864
IEC60417
No. 5266
ISO3864
IEC60417
No. 5057
Description
Class II equipment
To identify equipment meeting the safety requirements specified for Class
II equipment according to IEC 61140.
General prohibition
To identify actions or operations that are prohibited.
Contact prohibition
To indicate injury that could occur due to touching a specific part of the equipment.
Never look into the optical lens while the projector is on.
To indicate that the marked item don’t place anything on projector.
Caution, laser radiation
To indicate the equipment has a laser radiation part.
Disassembly prohibition
To indicate a risk of injury, such as electric shock, if the equipment is disassembled.
Standby, partial standby
To indicate that part of the equipment is in the ready status.
Caution, movable parts
To indicate that you must keep away from movable parts according to protection standards.
248
Glossary
This section briefly explains the difficult terms that are not explained in the text of this guide. For details, refer to other commercially available publications.
AMX Device
Discovery
Aspect Ratio
AMX Device Discovery is a technology developed by AMX to facilitate AMX control systems for easy operation of the target equipment.
Epson have implemented this protocol technology, and have provided a setting to enable the protocol function (ON).
See the AMX Web site for more details.
URL http://www.amx.com/
The ratio between an image's length and its height.
Screens with a horizontal:vertical ratio of 16:9, such as HDTV screens, are known as wide screens.
SDTV and general computer displays have an aspect ratio of
4:3.
Component Video A method that separates the video signal into a luminance component (Y), and a blue minus luminance (Cb or Pb) and a red minus luminance (Cr or Pr).
Composite Video A method that combines the video signal into a luminance component and a color component for transmission down a single cable.
Contrast The relative brightness of the light and dark areas of an image can be increased or decreased to make text and graphics stand out more clearly, or to make them appear softer. Adjusting this particular property of an image is called contrast adjustment.
DHCP An abbreviation of Dynamic Host Configuration Protocol, this protocol automatically assigns an IP address to equipment connected to a network.
Gateway Address This is a server (router) for communicating across a network
(subnet) divided according to subnet mask.
249
HDCP
HDMI
HDTV
IP Address
MHL
™
Infrastructure mode
Interlace
HDCP is an abbreviation for High-bandwidth Digital Content
Protection.
It is used to prevent illegal copying and protect copyrights by encrypting digital signals sent over DVI and HDMI ports.
Because the HDMI port on this projector supports HDCP, it can project digital images protected by HDCP technology.
However, the projector may not be able to project images protected with updated or revised versions of HDCP encryption.
An abbreviation for High Definition Multimedia Interface.
HDMI ™ is a standard aimed at digital consumer electronics and computers. This is the standard by which HD images and multichannel audio signals are digitally transmitted.
By not compressing the digital signal, the image can be transferred at the highest quality possible. It also provides an encryption function for the digital signal.
An abbreviation for High-Definition Television that refers to high-definition systems which satisfy the following conditions:
• Vertical resolution of 720p or 1080i or greater (p =
Progressive, i = Interlace)
• Screen aspect ratio of 16:9
A method for wireless LAN connection in which devices communicate through access points.
Transmits information needed to create one screen by sending every other line, starting from the top of the image and working down to the bottom.
Images are more likely to flicker because one frame is displayed every other line.
A number to identify a computer connected to a network.
An abbreviation for Mobile High-definition Link, a standard for connection interfaces aimed at mobile devices such as smartphones and tablets.
Images can be transferred at high quality and at high speeds without compressing the digital signal, and also charges connected devices.
Glossary
SDTV
SNMP sRGB
Progressive
Refresh Rate
SSID
Subnet Mask
SVGA
SXGA
Projects information to create one screen at a time, displaying the image for one frame.
Even though the number of scan lines is the same, the amount of flicker in images decreases because the volume of information has doubled compared with an interlace system.
The light-emitting element of a display maintains the same luminosity and color for an extremely short time.
Because of this, the image must be scanned many times per second to refresh the light-emitting element.
The number of refresh operations per second is called the
Refresh rate and is expressed in hertz (Hz).
An abbreviation for Standard Definition Television that refers to standard television systems which do not satisfy the conditions for HDTV High-Definition Television.
An abbreviation for Simple Network Management Protocol, which is the protocol for monitoring and controlling devices such as routers and computers connected to a TCP/IP network.
An international standard for color intervals that was formulated so that colors that are reproduced by video equipment can be handled easily by computer operating systems (OS) and the Internet. If the connected source has an sRGB mode, set both the projector and the connected signal source to sRGB.
SSID is identification data for connecting to another device on a wireless LAN. Wireless communication is possible between devices with the same SSID.
This is a numerical value that defines the number of bits used for the network address on a divided network (subnet) from the
IP address.
A screen size standard with a resolution of 800 (horizontal) ×
600 (vertical) dots.
A screen size standard with a resolution of 1,280 (horizontal) ×
1,024 (vertical) dots.
250
Sync.
Tracking
The signals output from computers have a specific frequency.
If the projector frequency does not match this frequency, the resulting images are not of a good quality.
The process of matching the phases of these signals (the relative position of the crests and the troughs in the signal) is called
Synchronization.
If the signals are not synchronized, flickering, blurriness, and horizontal interference occur.
The signals output from computers have a specific frequency.
If the projector frequency does not match this frequency, the resulting images are not of a good quality.
The process of matching the frequency of these signals (the number of crests in the signal) is called Tracking.
If Tracking is not carried out correctly, wide vertical stripes appear in the signal.
Trap IP Address This is the IP address for the destination computer used for error notification in SNMP.
VGA A screen size standard with a resolution of 640 (horizontal) ×
480 (vertical) dots.
XGA
WXGA
A screen size standard with a resolution of 1,024 (horizontal) ×
768 (vertical) dots.
A screen size standard with a resolution of 1,280 (horizontal) ×
800 (vertical) dots.
Notices
Check these sections for important notices about your projector.
g Related Links
• "FCC Compliance Statement" p.251
• "Operating System References" p.252
• "Copyright Attribution" p.253
FCC Compliance Statement
DECLARATION of CONFORMITY
According to 47CFR, Part 2 and 15
Class B Personal Computers and Peripherals; and/or
CPU Boards and Power Supplies used with Class B Personal Computers
We: Epson America, Inc.
Located at: 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806
Tel: 562-981-3840
Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR 2.909. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Trade Name: EPSON
Type of Product: LCD Projector
251
Model: H740C/H741C/H742C/H743C/H744C/H745C/H746C/H747C
FCC Compliance Statement For United States Users
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING
The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification or Declaration of this device and may cause interference levels which exceed the limits established by the
FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces. Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.
Since the Easy Interactive Pen is small, FCC Statement for Verification is written in the manual.
FCC Statement for Verification
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Notices
252
Indication of the manufacturer and the importer in accordance with requirements of EU directive
Manufacturer: SEIKO EPSON CORPORATION
Address: 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan
Telephone: 81-266-52-3131 http://www.epson.com/
Importer: EPSON EUROPE B.V.
Address: Atlas Arena, Asia Building, Hoogoorddreef 5,1101 BA Amsterdam
Zuidoost
The Netherlands
Telephone: 31-20-314-5000 http://www.epson.com/europe.html
Restriction of Use
When this product is used for applications requiring high reliability/safety such as transportation devices related to aviation, rail, marine, automotive etc.; disaster prevention devices; various safety devices etc; or functional/precision devices etc, you should use this product only after giving consideration to including fail-safes and redundancies into your design to maintain safety and total system reliability. Because this product was not intended for use in applications requiring extremely high reliability/safety such as aerospace equipment, main communication equipment, nuclear power control equipment, or medical equipment related to direct medical care etc, please make your own judgment on this product’s suitability after a full evaluation.
Operating System References
• Microsoft ® Windows Vista ® operating system
• Microsoft
• Microsoft
• Microsoft
• Microsoft
®
®
®
® Windows
Windows
Windows
Windows
®
®
®
® 7 operating system
8 operating system
8.1 operating system
10 operating system
In this guide, the operating systems above are referred to as "Windows Vista",
"Windows 7", "Windows 8", "Windows 8.1", and "Windows 10". Furthermore, the collective term "Windows" is used to refer to them all.
• OS X 10.7.x
• OS X 10.8.x
• OS X 10.9.x
• OS X 10.10.x
• OS X 10.11.x
In this guide, the operating systems above are referred to as "OS X 10.7.x", "OS
X 10.8.x", "OS X 10.9.x", "OS X 10.10.x", and "OS X 10.11.x". Furthermore, the collective term "OS X" is used to refer to them all.
Trademarks
EPSON is a registered trademark, EXCEED YOUR VISION, ELPLP and their logos are registered trademarks or trademarks of Seiko Epson Corporation.
Mac, Mac OS, and OS X, are trademarks of Apple Inc.
Microsoft, Windows, Windows Vista, PowerPoint, and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United
States and/or other countries.
WPA ™ , WPA2
Alliance.
™ , and Wi-Fi Protected Setup ™
App Store is a service mark of Apple Inc.
are registered trademarks of Wi-Fi
Google Play is a trademark of Google Inc.
HDMI and High-Definition Multimedia Interface are the trademarks or registered trademarks of HDMI Licensing LLC.
Notices
253
MHL, the MHL logo, and Mobile High-Definition Link are the trademarks or registered trademarks of MHL and LLC in the United States and/or other countries.
"QR Code" is a registered trademark of DENSO WAVE INCORPORATED.
PJLink trademark is a trademark applied for registration or is already registered in Japan, the United States of America and other countries and areas.
Crestron ® and Crestron RoomView
Electronics, Inc.
® are registered trademarks of Crestron
Ubuntu and Canonical are registered trademarks of Canonical Ltd.
Eneloop ® is a registered trademark of the Panasonic Group.
Other product names used herein are also for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
Copyright Notice
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions.
Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by
Seiko Epson Corporation.
The contents of this guide may be changed or updated without further notice.
Illustrations in this guide and the actual projector may differ.
Copyright Attribution
This information is subject to change without notice.
©SEIKO EPSON CORPORATION 2016. All rights reserved.
2016.9 413049000/413088700EN
advertisement