Advantech DS-080 series User manual

DS-080

Ultra Slim

Digital Signage Player

Copyright

The documentation and the software included with this product are copyrighted 2015 by

Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd.

Information provided in this manual is intended to be accurate and reliable. However,

Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements of the rights of third parties, which may result from its use.。

DS-080 Series User Manual

2

Acknowledgements

Award is a trademark of Award Software International, Inc.

IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Corporation.

Intel® and ATOM® are trademarks of Intel Corporation.

RTL is a trademark of Realtek Semi-Conductor Co., Ltd.

ESS is a trademark of ESS Technology, Inc.

UMC is a trademark of United Microelectronics Corporation.

SMI is a trademark of Silicon Motion, Inc.

Creative is a trademark of Creative Technology LTD.

CHRONTEL is a trademark of Chrontel Inc.

All other product names or trademarks are properties of their respective owners.

For more information about this and other Advantech products, please visit our web-site at: http://www.advantech.com/ For technical support and service, please visit our support website at: http://support.advantech.com.tw/support/

DS-080 Series User Manual

3

Product Warranty (24 months)

Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase.

This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation. Advantech assumes no liability under the terms of this warranty as a consequence of such events.

Because of Ad vantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defective, it will be repaired or replaced at no charge during the warranty period. For outof-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.

Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

–

Collect all the information about the problem encountered. (For example, CPU speed,

Advantech products used, other hardware and software used, etc.) Note anything abnormal and list any onscreen messages you get when the problem occurs.

–

Call your dealer and describe the problem. Please have your manual, product, and any helpful information readily available.

–

If your product is diagnosed as defective, obtain an RMA (return merchandise authorization) number from your dealer. This allows us to process your return more quickly.

–

Carefully pack the defective product, a fully-completed Repair and Replacement Order

Card and a photocopy of the proof of purchase date (such as your sales receipt) in a shippable container. A product returned without proof of the purchase date is not eligible for warranty service.

–

Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer.

DS-080 Series User Manual

4

Declaration of Conformity

–

FCC Class B

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

DS-080 Series User Manual

5

Technical Support and Assistance

1. Visit the Advantech website at www.advantech.com/support where you can find the latest information about the product.

2. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call:

 Product name and serial number

 Description of your peripheral attachments

 Description of your software (operating system, version, application software, etc.)

 A complete description of the problem

 The exact wording of any error messages

Warnings, Cautions and Notes

Warning! Warnings indicate conditions, which if not observed, can cause personal injury!

Caution

!

Cautions are included to help you avoid damaging hardware or losing data.

e.g. There is a danger of a new battery exploding if it is incorrectly installed. Do not attempt to recharge, force open, or heat the battery. Replace the battery only with the same or equivalent type recommended by the manufacturer. Discard used batteries

according to the manufacturer's instructions.

Note! Notes provide optional additional information.

DS-080 Series User Manual

6

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service personnel:



The power cord or plug is damaged







Liquid has penetrated the equipment.



The equipment has been exposed to moisture.



The equipment does not work well, or you cannot get it to work according to



 the user's manual.

The equipment has been dropped and damaged.

The equipment has obvious signs of breakage.



15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE STORAGE

TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C (140° F). THIS

COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A

CONTROLLED ENVIRONMENT.

16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.

REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE

MANUFACTURER, DISCARD USED BATTERIES ACCORDING TO THE

MANUFACTURER'S INSTRUCTIONS.

17. The sound pressure level at the operator's position according to IEC 704-1:1982 is no more

DS-080 Series User Manual

7

than 70 dB (A).

18. RESTRICTED ACCESS AREA: The equipment should only be installed in a Restricted

Access Area.

19. DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.

DS-080 Series User Manual

8

Packing List

Before installation, please ensure the following items have been shipped:



1 x DS-080 series player



1 x Driver/Utility Disk



1 x China RoHS Sheet



1 x Simplified Chinese User manual



1 x Traditional Chinese User manual



1 x Mounting kit

DS-080 Series User Manual

9

DS-080 Series Part Number:













DS-080GB-S8A1E

DS-080GF-S8A1E

DS-080GB-S9A1E

DS-080GF-S9A1E

DS-080GB-U2A1E

DS-080GF-U2A1E

DS-080 Series User Manual

10

Chapter

1

General Introduction

This chapter gives background information on DS-080 series

DS-080 Series User Manual

11

1.1

Introduction

DS-080 series is powered by Intel

® Core™ i7/i5/Celeron™ processors for Full HD video playback performance. DS-060 series is a media player that delivers advanced graphics performance for all your signage applications. DS-060 series has dual HDMI to provide multi display outputs simultaneously. For better connectivity, it supports 2x LAN, internal 1 x Mini PCIe interface for add-on functions such as wireless network and TV tuner cards to fulfill different requirements. And also supports 4x USB 3.0, 1xCOM ports for system integration and applications.

1.2 Product Features

1.2.1

General



Supports I ntel® Core ™ i7/i5/Celeron™ processors



Supports2 x HDMI、2 x GbE、4 x USB、1 x COM (RS-232)



Supports 2.

5” SATA HDD drive bay (Height 7mm )



Built-in MiniPCIe slot for easy expansion



Ultra Slim Features, easy to install. Easy integration and easy maintenance

1.2.2

Display



Support up to 3940 x 2160 @ 30 Hz video playback performance (subject to the video media format and playback software)

1.2.3

Power Consumption



Typical：4.34 W (5 th

Gen Intel

® Core™ i5-5350U 1.8 GHz)



Max：15.59 W (5 th

Gen Intel

® Core™ i5-5350U 1.8 GHz)

1.3

Hardware Specifications



CPU：5 th

Gen Intel

® Core™ i7/i5/Celeron™ processors



System Chipset: Integrated in SOC



Graphic chipet: Integrated graphics built in Processor



BIOS AMI uEFI 128 Mbit



System Memory: 2 x 204pin SODIMM, support DDR3L 1600 MHz，Up to 8 GB single

DIMM



HDD: Supports 2.

5” SATA HDD drive bay (Height 7mm)



Watchdog Timer：supported by Advantech SUSIAccess



IO Interfaces

–

1 x RS-232/RS-422/RS-485 or 2 x RS-422/RS-485 with extension cable

–

2 x HDMI

–

4 x USB 3.0 compliant

DS-080 Series User Manual

12

–

1 x (SPDIF/Line-out/ Mic-in), support Jack Sense



Ethernet Chipset: 1 x Intel I211; 1 x Intel I218

–

Speed: 100/1000 Mbps

–

Interface：2 x RJ-45 jacks with LED

– Standard：IEEE 802.3z/ab (1000 Base-T) 或 IEEE 802.3u 100 Base-T compliant



Resolution:

–

3840 x 2160 @ 30Hz (Core i7/i5)

– 1920 x 1080 @ 60Hz (Celeron)



Expansion

– MiniPCIe：1 socket internal

1.4

Mechanical Specification

1.4.1 Dimension

180 x 190 x 19mm (L x W x H)

1.4.2 Weight

0.87 kg (1.92 lbs)

Figure1.1：Diemnsions

DS-080 Series User Manual

13

1.5

Power Requirements

1.5.1 System Power

Minimum power input: DC19V, 3.42A

1.5.2

RTC Battery

3V/200mAH BR2032

1.6 Environmental Specifications

1.6.1

Operating

Temperature

0° C - 40°C (32~122°F)

1.6.2 Relative Humidity

95% @ 40°C ( Non Condensing )

1.6.3 Storage Temperature

-20 ~ 60°C (-4~140°F)

1.6.4 Vibration Loading During Operation

0.5 Grms, IEC 60068-2-64, random, 5 ~ 500 Hz, 1 hr/axis.

1.6.5 Shock During Vibration

20 G, IEC 60068-2-27, half sine, 11 ms duration

1.6.6 Safety

UL, BSMI, CCC

1.6.7

EMC

CE, FCC Class B, BSMI, CCC

DS-080 Series User Manual

14

Chapter

2

Hardware Installation

This chapter introduces external IO and the installation of DS-080 series

Hardware

DS-080 Series User Manual

15

2.1 DS-080 Series I/O Connectors

Figure 2.1：Front View

Figure 2.2：Rear View

2.2 DS-080 Series External I/O Connectors

2.2.1

Power ON/OFF Button

DS-080 Series has a power ON/OFF button on the front side. Push this button to turn the system ON and OFF. It also supports a 5 second delay soft power off.

Figure 2.3：Power Button

2.2.2 DC Input Connector

DS-080 Series supports 19VDC DC power in.

Figure 2.4：DC Input Connector

2.2.3 LAN Connector

DS-080 Series provides two RJ-45 LAN interface connector, fully compliant with

DS-080 Series User Manual

16

IEEE802.3u 10/100/1000 Base-T CSMA/CD standards. The Ethernet port provides a standard RJ-45 jack connector with LED indicators to show its Active/Link status and speed status.

4

5

6

7

8

9

10

11

LAN Port Pin Assignments

Pin

1

2

3

12

13

14

Figure 2.5：LAN Connector

Signal

MDI0+

MDI0-

MDI1+

MDI1-

GND

GND

MDI2+

MDI2-

MDI3+

MDI3-

VCC

ACT

+V3.3 & Link1000#

+V3.3 & Link100#

2.2.4 HDMI Connector

The HDMI (High-Definition Multimedia Interface) provides an all-digital audio/video interface to transmit the uncompressed audio/video signals and is HDCP compliant.

Connect the HDMI audio/video device to this port. HDMI technology can support a maximum resolution of 3940 x 2160 @ 30 Hz but the actual resolution supported depends on the monitor being used.

Figure 2.6：HDMI Connector

HDMI Pin Assignments

7

8

9

3

4

5

6

Pin

1

2

Signal

TMDS Data 2+

TMDS Data 2 shield

TMDS Data 2-

TMDS Data 1+

TMDS Data 1 shield

TMDS Data 1-

TMDS Data 0+

TMDS Data 0 shield

TTMDS Data 0-

DS-080 Series User Manual

17

15

16

17

18

19

10

11

12

13

14

2.2.5 USB Connectors

TMDS Clock+

TMDS Clock shield

TMDS Clock-

CEC

Reserved

SCL

SDA

DDC/CEC Ground

+5V

Hot Plug Detect

DS-080 Series provides four USB interface connectors, which gives complete Plug & Play and hot swapping capability for up to 127 external devices. The USB interface is compliant with USB UHCI, Rev. 3.0. The USB interface supports Plug and Play, which enables you to connect or disconnect a device without turning off the system.

Figure 2.7： USB Connector

USB Port Pin Assignments

Pin

1

2

3

4

Signal

VCC

USB Data-

USB Data+

GND

2.2.6 COM Connector

DS-080 Series provides one D-sub 9-pin connectors serial communication interface port.

The ports support RS-232/RS-422/RS-485 mode communications.

2

3

4

5

6

7

8

COM Port Pin Assignments

Pin

1

Figure 2.8：COM Connector

Signal

DCD

RxD

TxD

DTR

GND

DSR

RTS

CTS

DS-080 Series User Manual

18

9 RI

2.2.7 Audio Connectors

DS-080 Series S/PDIF can be connected to Stereo speakers, earphone or surround speakers.

Figure 2.9：

Audio Connector

DS-080 Series User Manual

19

2.3 Hardware Installation

2.3.1 Attached HDD Thermal Pads

(1) Attached thermal pads on DS-080 HDD bracket

Figure 2.10.1：Attach HDD thermal pads

(2) Attached thermal pads on HDD

Figure 2.10.2：Attach HDD thermal pads

Caution! D on’t cover thermal pad over the a small hole in HDD enclosure (about

0.5 mm in breadth)

DS-080 Series User Manual

20

2.3.2 HDD Bracket Installation

(1)

Fix HDD with screws on the HDD bracket

Figure 2.11：HDD Bracket Installation

2.3.3 HDD Installation

(1)

Remove the top cover by loosening the fixing screws

(2)

Connect HDD with on board SATA connector and then fix it with screws

Figure 2.12：HDD Installation

DS-080 Series User Manual

21

2.3.4 Mini PCIe Card/Memory Module Installation

(1)

Remove the bottom cover by loosening the fixing screws and then insert Mini PCIe and Memory Module into the socket.

Figure 2.13：Mini PCIe Card/Memory Module Installation

DS-080 Series User Manual

22

2.3.5 Mounting Bracket Installation

(1)

Using 4 pcs of M4-10L screws to mount the VESA bracket module behind the display.

Monitor

Figure 2.14：Mounting Bracket Installation (I)

Note! DS-080 is being mounted on the monitor and maximum loading is 0.8 kg

Note! Mounting plate is used to fix DS-080 in the back of the monitor.

Note! Screw size depends on the display specification. Please do check the display manual before assembly

(2)

Find 4 pcs of M3 screws to affix the mounting brackets on system bottom. (The screws and mounting brackets are both included in the system accessory box)

(3)

Using M3-6L screws to affix system on the VESA bracket module. (Note: Screws qty varies by system.)

Figure 2.15：Mounting Bracket Installation (II)

DS-080 Series User Manual

23

Figure 2.16：Mounting Bracket Installation (III)

2.3.6 Mounting Direction

(1)

Flat View

(2)

Vertical - Upright

Figure 2.17：Flat View

Figure 2.18: Vertical - Upright

DS-080 Series User Manual

24

wwww.advantech.com

Please verify specifications before quoting. This guide is intended for reference purposes only.

All product specifications are subject to change without notice.

No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission of the publisher.

All brand and product names are trademarks or registered trademarks of their respective companies.

© Advantech Co., Ltd. 2015

DS-080 Series User Manual

25