null  null
Data Sheet
ACDC-3400 IND
CAT IV Industrial True RMS
Clamp Meter
This CAT IV rated clamp is ideal for industrial applications and
utilities that require an extra level of safety. Includes True RMS
sensing for accuracy and dependability. Extra large jaw to
accommodate wide diameter wires.
■■ True RMS
■■ Measures AC Current up to 1000 ACA, Voltage up to 750
VAC / 1000 VDC, Frequency, Resistance and Capacitance
and Duty Cycle
■■ Peak Hold
■■ Relative Zero
■■ Audible continuity
No hassle
warranty
No waiting.
No shipping
charges.
Our commitment to
high-quality products
and customer service
is demonstrated by
our industry exclusive
“No Hassle” warranty.
In the unlikely event
that an Amprobe Test
Tool requires warranty
service, any of our
local dealers are
authorized to replace
it, on the spot.
■■ Auto and manual ranging
■■ Auto power off
■■ Data hold
■■ Backlight
■■ Diode Test
■■ Duty Cycle
■■ Accommodates conductors up to 2” (51mm) in diameter
■■ Safety CAT IV 600 V, CAT III 1000 V
■■ Test leads, battery (installed), Users Manual, and Carrying
Case included with the product
(note: $500 MSLP limit)
1000V
Amprobe® Test Tools
600V
www.Amprobe.com
ACDC-3400 IND CAT IV Industrial True RMS Clamp Meter
Specifications (valid for 23 °C ± 5 °C, for less than 75% relative humidity).
DC Volts
Input impedance
Overload protection
Ranges
Accuracy
660.0 mV, 6.600 V, 66.00 V, 660.0 V, 1000 V
± (0.5% rdg + 2 dgts)
660 mV: >100 MΩ; 6.6 V:10 MΩ; 66 V to 1000 V: 9.1 MΩ
1000 VDC or 750 VAC rms
AC Volts True RMS
Ranges
Frequency
Accuracy
660.0 mV
50 to 100 Hz
± (1.5% rdg + 8 dgts)
6.600V, 66.00V
50 to 500 Hz
± (1.5% rdg + 8 dgts)
660.0V, 750V
50 to 500 Hz
± (1.5% rdg + 8 dgts)
Frequency*
50 to 1 kHz
± (0.1% rdg + 5 dgts)
* Frequency: 10% to 100% of voltage range
Peak Hold
Ranges
66.00V, 660.0V, 750V
Frequency
50 to 500 Hz
Accuracy
± (3.0% rdg + 300 dgts)
AC coupled TRMS
Crest factor
Input impedance
Overload protection
5% to 100% of range
≤3
660 mV: >100 MΩ; 6.6 V:10 MΩ; 66 V to 750 V: 9.1 MΩ
1000 VDC or 750 VAC rms
AC Current True RMS
Ranges
Frequency
Accuracy
660.0A
50 to 60 Hz
± (2.0% rdg + 10 dgts)
660.0A
61 to 400 Hz
± (3.0% rdg + 10 dgts)
1000 A
50 to 60 Hz
± (2.5% rdg + 10 dgts)
1000 A
61 to 400 Hz
± (3.5% rdg + 10 dgts)
Frequency*
50 to 1kHz
± (0.1% rdg + 5 dgts)
* Frequency: 10% to 100% of current range
Peak Hold
AC coupled TRMS
Crest factor
Overload protection
Ranges
660.0A, 1000A
5% to 100% of range
≤3
1000A AC
Frequency
50 to 400 Hz
DC Current
Overload protection
Range
660.0A
1000A
1000A DC
Accuracy
± (2.0% rdg + 5 dgts)
± (3.0% rdg + 5 dgts)
Resistance
Open circuit volts
Overload protection
Range
660.0Ω, 6.600kΩ, 66.00kΩ, 660.0kΩ
6.600MΩ
66.00MΩ
-0.8 Vdc typical , (-1.2 Vdc on 660 Ω range)
1000 VDC or 750 VAC rms
Amprobe® Test Tools
Accuracy
± (3.0% rdg + 200 dgts)
Accuracy
± (1.0% rdg + 5 dgts)
± (2.0% rdg + 5 dgts)
± (3.5% rdg + 5 dgts)
Data Sheet
ACDC-3400 IND CAT IV Industrial True RMS Clamp Meter
Data Sheet
Specifications (continued)
Capacitance
Overload protection
Temperature
Sensor type
Overload protection
Range
6.600ηF, 66.00ηF
660.0ηF, 6.600μF, 66.00μF,660.0μF
6.6 mF
1000 VDC or 750 VAC rms
Range
0.0°C to 400.0°C
-35.0°C to 0.0°C, 400°C to 1000°C
32.0°F to 750.0°F
-30.0°F to 32.0°F, 750°F to 1832°F
K-type thermocouple
30 V Max
Accuracy
±(3.0% rdg + 20 dgts)
±(3.0% rdg + 10 dgts)
±(5.0% rdg + 10 dgts)
Diode Test
Test current
Accuracy
Open circuit volts
Audible indication
Overload protection
1.0 mA (approximate)
± (1.5% rdg + 5 dgts)
3.2 Vdc typical
< 0.25 V
1000 VDC or 750 VAC rms
Continuity
Ranges
Audible indication
Response time
Overload protection
660.0 Ω
< 30 Ω
500 ms
1000 VDC or 750 VAC rms
Frequency (Auto ranging)
Sensitivity
Minimum pulse Width
Range
66.00 Hz, 660.0 Hz, 6.600k Hz, 66.00 kHz, 660.0 kHz, 1.000 MHz
10 Hz to 1 MHz: > 3.5 V rms
>1 us
% Duty Cycle
Range
Resolution:
Minimum Pulse Width
Frequency range
Accuracy ( 5V logic )
Overload protection
5.0 % to 95.0 %
0.1 %
>10 us
40 Hz to 20 kHz
± (2% rdg + 10 dgts)
1000 VDC or 750 VAC rms
Accuracy
± (1.0% + 1°C)
± (2.0% + 3°C)
± (1.0% + 2°F)
± (2.0% + 6°F)
Accuracy
± (0.1% rdg + 3 dgts)
www.Amprobe.com
ACDC-3400 IND CAT IV Industrial True RMS Clamp Meter
Data Sheet
Technical Data – General Information
Display
Polarity
Over range
Zero
Low battery indication
Auto power off
Backlight
Measurement rate
Analog bar-graph
Operating environment
Storage temperature
Temperature Coefficient
Environmental
Jaw opening capability
Power
Battery life
Dimensions
Weight
Safety
3¾ digit liquid crystal display (LCD) (6600 count) with a 66-segment analog bar-graph
Automatic, positive implied, negative polarity indication
(OL) or (-OL) is displayed
Automatic
“” is displayed when the battery voltage drops below the operating level
Approx. 30 minutes
Backlight auto-off approx. 60 sec.
2.8 times per second, nominal
28 times per second
0°C to 50°C (32°F to 122°F) at < 70% R.H.
-20°C to 60°C (-4°F to 140°F) at < 80% R.H. with battery removed from meter
0.1 × (specified accuracy) per °C. (0°C to 18°C, 28°C to 50°C)
2000m (6561.7 Feet), Indoor use
57 mm (2.0 in) conductor
Single standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22
Typically 75 hours with carbon-zinc; 150 hour with alkaline
283 x 105 x 50 mm (11.1 x 4 x 2.1 in.)
559 gm (1.23 lb.)
LVD Meets EN61010-1:2001 and EN61010-2-032:2002, CAT III 1000V, CAT IV 600V, class II and pollution
degree 2
 EMC
EN 61326-1:2006 This product complies with requirements of the following European Community
Directives: 2004/108/EC (Electromagnetic Compatibility) and 2006/95/EC (Low Voltage) as amended
by 93/68/EEC (CE Marking). However, electrical noise or intense electromagnetic fields in the vicinity
of the equipment may disturb the measurement circuit. Measuring instruments will also respond to
unwanted signals that may be present within the measurement circuit. Users should exercise care and
take appropriate precautions to avoid misleading results when making measurements in the presence
of electronic interference.
Optional Accessories
TL-1500 Test leads with set of alligator clips
Amprobe® Test Tools
website: www.Amprobe.com
email: [email protected]
Everett, WA 98203
Tel: 877-AMPROBE
Amprobe® Test Tools
Amprobe® Test Tools Europe
Amprobe Test Tools Europe
Beha-Amprobe GmbH
In den Engematten 14
79286 Glottertal, Germany
Tel.: +49 (0) 7684 8009 - 0
©2009 Amprobe Test Tools. All rights reserved.
03/2009 3465184 Rev A
www.Amprobe.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement