for intercoms Choose
COLOUR VIDEO INTERCOM WITH MEMORY
INSTRUCTION MANUAL
Choose
for intercoms
PAN790 SERIES
FIRE • SECURITY • INTERCOMS
psaproducts.com.au
1
CONTENTS
PAGE
1.
Features
3
2.
Kit Contents
3
3.
Door Station Technical Data
3
4.
Indoor Monitor Technical Data
4
5.
Indoor Monitor Installation
5
6.
Door Station Installation
5
7.
Wiring Diagrams
7
8.
Operating Instruction
11
9.
Accessories
13
10.
Notice
13
11.
Warranty & Liability
13
2
1. FEATURES
•
Super slim aluminum front and back panels
•
Internal paging & intercom function
•
Hands-free intercom doorbell function.
•
Picture memory recording in internal memory
•
(SD card not supplied)
•Ring volume, talking volume, chroma and
1.Features
1.Features
•7’’ TFT-LED color screen with no radiation, low• Baby monitoring function
1.
Super 1.
slim
aluminium
front andfront
backand
panels
indoorof
monitor,
Super
slim aluminium
backofpanels
indoor Surface
monitor, fine
Surfac
1.Features
1.Features
power consumption and high definition.
• Mute function
andslim
wiredrawing
craft,
with
simplicity
and classic
style.
processing
and
wiredrawing
craft,
with
simplicity
anddesign
classic
design
s
1. processing
Super1.
slim
aluminium
front
and
back
panels
ofpanels
indoor
Surface
fine
Super
aluminium
front
and
back
ofmonitor,
indoor
monitor,
Surfac
• Door release function
2. 7’’
TFT-LED
color
screen,no
radiation,
low-power
consumption
and high
2. processing
7’’ TFT-LED
color
screen,no
radiation,
consumption
and hs
processing
and
wiredrawing
craft, with
simplicity
and
classic
design
style.
and
wiredrawing
craft,
with low-power
simplicity
and
classic
design
Monitoring function
2. definition.
7’’ TFT-LED
color screen,no
radiation,radiation,
low-power
consumption
and highand h
2. definition.
7’’ TFT-LED
color screen,no
low-power
consumption
•Motion picture recording when SD card installed
• Sixteen polyphonic melodies.
3. Hands-free
intercome
doorbell
function.
3.
Hands-free
intercome
doorbell
function.
definition.
definition.
4.
camera
or
indoor
monitor
selectable
with electric-controlled
door
4. Hands-free
Outdoor
camera
or
indoor
monitor
selectable
with electric-controlled
3. Outdoor
Hands-free
intercome
doorbell
function.
3.
intercome
doorbell
function.
•Aluminum IP44 brushed outdoor camera in surface
brightness adjustable.
release
4. release
Outdoor
camera function.
or
indoorormonitor
with electric-controlled
door
4.function.
Outdoor
camera
indoor selectable
monitor selectable
with electric-controlled
or flush mount option with blue backlight
5. Monitoring
the outside
house.of house.
5. function.
Monitoring
theofoutside
release
release
function.
2. KIT CONTENTS
6.
melodies.
6.
Sixteen
polyphonic
melodies.
5. Sixteen
Monitoring
the outside
ofoutside
house.
5. polyphonic
Monitoring
the
of house.
7.
Ring
volume,
talking
volume,
chroma
brightness
adjustable.
7. polyphonic
Ring volume,
talkingmelodies.
volume, and
chroma
and brightness
adjustable.
6. Sixteen
melodies.
6.
Sixteen
polyphonic
8.
15Mvolume,
cable
and
one volume,
adapter
for
DIY
market.
8. Ring
Enclosed
15M
cable
and
oneand
adapter
for DIY
market.adjustable.
7. Enclosed
Ring volume,
talking
volume,
chroma
brightness
adjustable.
7.
talking
chroma
and
brightness
8. Enclosed
15M cable
and
one and
adapter
DIY market.
8. Enclosed
15M
cable
one for
adapter
for DIY market.
• One indoor monitor
• One adapter
•One Rain Hood
(surface mount kit only)
• One outdoor camera
2.Outdoor
Camera
Performance
Data Data
2.Outdoor
Camera
Performance
2.Outdoor
Camera
Performance
Data Data
2.Outdoor
Camera
1.
IRPack
distance
more
than
4M
1. IR distance
more
than
4M Performance
• Accessory
• One bracket for indoor monitor
3. DOOR STATION
2.
control
2. Automatic
gain
control
1. Automatic
IR distance
more
than
4M
1.
IRgain
distance
more
than 4M
3.
temperature:
-20°C~50°C
3. Automatic
Working
temperature:
2. Working
Automatic
gain control
2.
gain
control -20°C~50°C
4.
CMOS
more
than
380
TV line
CCD
than
420than
TV line
4.
CMOS
more
than
380 TV
linemore
CCD
more
420 TV
3. Resolution:
Working
temperature:
-20°C~50°C
3. Resolution:
Working
temperature:
-20°C~50°C
TECHNICAL
DATA
5.
Outdoor
camera
dimension:
109【W】x
158【H】x
57【D】
5. Resolution:
VP-D
Outdoor
camera
dimension:
109【W】x
158【H】x
57【D】
4. VP-D
Resolution:
CMOS
more
than
380
TV line
CCD
more
than
420than
TV
line
4.
CMOS
more
than
380 TV
line
CCD
more
420 TV
Outdoor
cameradimension:
dimension:
122【W】x
182【H】x
48【D】
VP-D+Outdoor
Outdoor
cameradimension:
dimension:
122【W】x
182【H】x
48【D】
5. VP-D+
VP-D 5.
Outdoor
camera
109【W】x
158【H】x
57【D】
VP-D
camera
109【W】x
158【H】x
57【D】
VP-D+ Outdoor
camera dimension:
122【W】x
182【H】x
48【D】48【D】
VP-D+ Outdoor
camera dimension:
122【W】x
182【H】x
•
120° wide angle lens
•
IR distance more than 2m
•
Motion recording range: within 2m
•
Automatic gain control
•
Working temperature: -20°C~50°C
•
Resolution: CCD more than 480 TV Line
Front of
Camera
Camera
Speaker
Camera
Camera
Speaker
Call
Button Call
Button
Speaker
Speaker
Nameplate Nameplate
Microphone
Call Button Microphone
Call Button
Nameplate Nameplate
surface
mounted
camera
VP-D
Front
mounted
camera
Microphone
Microphone
Frontof
ofsurface
surface
mounted
camera PAN790SC
Connection Terminal
Connection Terminal
Volume ButtonVolume Button
Connection Terminal
Connection Terminal
Volume Button
Volume Button
Back
surface
mounted
VP-D
Back of
surfacecamera
mounted
camera V
VP-D
Backofof
surface
mounted
camera PAN790SC
Back of surface
mounted
VP-D
mounted
VP-D
Back of
surfacecamera
mounted
camera V
Front of
surfacecamera
mounted
camera VP-D
•
PAN790SC Outdoor camera dimension:Front of surface
Camera
Camera
109(W) x 158(H) x 57(D) mm
PAN790FC Outdoor camera dimension:
Speaker
Speaker
Camera
Camera
Connection Terminal
Connection Terminal
122(W) x 182(H) x 48 (D) mm
Call Button Call Button
Volume ButtonVolume Button
Speaker
Speaker
Connection Terminal
Connection Terminal
Nameplate Nameplate
•Flush camera dimensions:
Call Button Call
Button
Volume Button
Volume Button
Microphone
Microphone
Plate: 122(W) x 182(H) x 4(D) mm
Nameplate Nameplate
Back of flush
mounted
VP-D+
mounted
VP-D+
Microphone
Back
of flushcamera
mounted
camera VP-D
Microphone
Front
of
flushcamera
mounted
camera VP-D+
Wallbox: 92(W) x 144(H) x 38 (D) mm Front of flush
Back
of flush
mounted
VP-D+
Front of flush
mounted
camera
VP-D+
ofmounted
flushcamera
mounted
camera VP-D
Front
of of
flush
mounted
camera VP-D+
Front
flush
mounted
Back
ofBack
flush
camera PAN790FC
3
camera PAN790FC
.Indoor Monitor Performance Data
4. MONITOR TECHNICAL DATA
3.Indoor
3.Indoor Monitor
MonitorModePerformance
PerformanceABCD12347
Data
Data
+
Speaker
Play
Intercom
Delete
Monitor
TF Card
Speaker
Speaker
Play
Play
Delete
Delete
TF
TFCard
Card
Unlock
Mode
Mode
Talk
ABCD12347
ABCD12347 ++
Intercom
Intercom
Monitor
Monitor
Connection
Unlock
UnlockTerminal
DC Connection Terminal
Talk
Talk
rformance Parameter
Adapter input voltage: AC110-120V/60Hz or
AC220-240V/50Hz
Connection
ConnectionTerminal
Terminal
Connection
Terminal
DC
DCConnection
ConnectionTerminal
Terminal
DC Connection
Terminal
Adapter
outputParameter
voltage, output current: DC15V 1200mA
Performance
Performance
PerformanceParameter
Parameter
Talking
last
time:
120s
1. Adapter input voltage:±10%
AC220-240V/50Hz
Mute
1.
1.
Adapter
Adapter
input
input
voltage:
voltage:
AC110-120V/60Hz
AC110-120V/60Hzor
orAC220-240V/50Hz
AC220-240V/50Hz
2. Adapter output voltage, output current: DC15V 1200mA
Speaker
Monitoring last time: 40s ±10%
3.
Talking
last time:
120S±10%
2.
2.Adapter
Adapter
output
output
voltage,
voltage,output
output
current:
current:
DC15V
DC15V
1200mA
1200mA
2
Power Light
Working
distance:
50M(5×0.5mm
)
4. Monitoring
last time:
40S±10%
3.
3.Talking
Talkinglast
lasttime:
time:120s
120s±10%
±10%
Contrast Adjuster
Mute
Mute
5. consumption:
Working distance: 50M
(5×0.5mm2)
Power
standby
<0.5W, working<10W
Speaker
4.
4.Monitoring
Monitoring
last
laststandby
time:
time:<0.5W,
40s
40s±10%
±10%<10W
BrightnessSpeaker
Adjuster
6.
Power
consumption:
working
Illumination
intensity:
2
luces
2
2
7.
Illumination
intensity:
2 luces
Power
PowerLight
Light
5.
5.Working
Workingdistance:
distance:
50M(5×0.5mm
50M(5×0.5mm))
Talk Volume
Visual
92°120°
wide-angle
8. angle:
Visual angle:
wide-angle
Contrast
ContrastAdjuster
Adjuster
6.
6.
Power
Power
consumption:
consumption:
standby
standby
<
<
0.5W,
0.5W,
working
working
<
<
10W
10W
9. Working temperature: -10°C~40°C
Working
temperature: -10°C~40°C
Brightness
BrightnessAdjuster
Adjuster
10.
Relative
humidity:intensity:
10-90% (RH) 22luces
7.
7.Illumination
Illumination
intensity:
luces
Talk
TalkVolume
Volume
. Relative
humidity:
10-90%(RH)
11. Indoor
monitor dimension:
200x125x18mm
8.
8.Visual
Visualangle:
angle:92°
92°wide-angle
wide-angle
12. Internal
Memory:
60MB (80 pictures)
Indoor
monitor
dimension:
200x125x21.5mm
9.
9.
Working
Working
temperature:
temperature:
-10°C~40°C
-10°C~40°C
13. SD Card: Maximum size 16GB
10.
10.Relative
Relativehumidity:
humidity:10-90%(RH)
10-90%(RH)
Specifications
arameter
11.
11.
Indoor
Indoormonitor
monitordimension:
dimension:200x125x21.5mm
200x125x21.5mm
7.0
creen
Size
PARAMETER
SPECIFICATIONS
UNIT
Screen Size
7.0
Inch
Resolution
Parameter
Parameter
Resolution
Unit
Inch
Dot
Unit
Unit
mm
Inch
Inch
mm
Dot
Dot
creen Figure
169.4【W】X
100【H】X 5.7【T】
Active
ActiveDimension
Area
Area
154.08【H】X
154.08【H】X
85.92【H】
85.92【H】 mm
mm
mm
Active Area
ctive Area
Screen
Screen
Size
Size
Pixel Size
Screen
Figure Dimension
ixel Size
Resolution
Resolution
Pixel
PixelSize
Size
800x480
Specifications
Specifications
800 x 480
Dot
154.08 (H) X 85.92 (V) 85.92【H】
mm
154.08【H】X
7.0
7.0
0.1926 (W) X 0.1790 (H)
mm
169.4
(W) X 100 (H) X 5.7 0.1790【H】
(D)
mm
0.1926【W】X
800x480
800x480
0.1926【W】X
0.1926【W】X0.1790【H】
0.1790【H】
Screen
ScreenFigure
FigureDimension
Dimension 169.4【W】X
169.4【W】X100【H】X
100【H】X5.7【T】
5.7【T】
mm
mm
mm
mm
4
4.Indoor Monitor Installation
1
2
5. INDOOR MONITOR INSTALLATION
onitor
Installation
4.Indoor Monitor Installation
2
1
2
1. Fix the bracket of the video indoor monitor o
2. Hang the monitor on the bracket after finish
enclosed adapter into the sockets of AC po
4.Indoor
Monitor Installation
Monitor Installation
1
2
2
5.Outdoor
Camera
1. Fix the bracket of the video indoor monitor on the wall
with screws (picture
1).
A. Surface
mounted
2.1.Hang
theindoor
monitor
onvideo
the bracket
after
finishing
the
connection.
the
video
on the
wall
with
screws
(picture
1).Plug the
Fix the
bracket
ofmonitor
the
indoor
monitor
on
the wall
with wire
screws
(picture 1).
Picture 1.
of
Picture 2.
Installatio
Hang theadapter
monitor on
the the
bracket
after finishing
wire and
connection.
Plug the (picture 2).
enclosed
into
sockets
ofwire
AC the
power
the monitor
or on2.
the
bracket
after
finishing
thepower
Plug
enclosed
adapter
into the
sockets of AC
andconnection.
the monitor (picture
2). the
1
2
er into the sockets of AC power and the monitor (picture 2).
5.Outdoor
Camera
Installation
DOOR
STATION
ket
1. Fix
of the6.
video
bracket
indoor
of the
monitor
video indoor
onINSTALLATION
the
monitor
wall withonscrews
the wall
(picture
with screws
1).
(picture 1).
A. on
Surface
mounted
2.
onitor
Hang
the
themonitor
bracket
on
after
thefinishing
bracket the
afterwire
finishing
connection.
the wire
Plug
connection.
the
Plug the
Camera
Installation
dapter
enclosed
the
adapter
sockets
into
ofthe
ACsockets
power and
of AC
thepower
monitor
and
(picture
the monitor
2). (picture 2).
A.into
SURFACE
MOUNTED
1
2
1. With
the standard
hex wrench
open the s
the door
station and remove
the front
the hex wrench supplied, remove the screw at the bottom of
nted1.With
cover.
(picture 1).
or
5.Outdoor
Camera Installation
Camera
Installation
2
2.Take off the name plate for marking family name or room name, then fix the name plate (picture 2).
2. Take off the name plate for marking fami
3.Connect the wires following the wiring diagrams supplied on page 8, 9 or 10. Using the volume control pot at
mounted
A. Surface
mounted
fix the
the rear
of the door station, adjust the speaker volume to suit (picture
3). name plate.
1
2
3
2
4
2. Take off the name plate for marking family name or room name, then
fix the name plate.
ard hex wrench open the screw under the front cover
3
4
5
140~170CM
(picture 1).
call within 30cm
1. With the standard hex wrench open the screw under the front cover
30.0CM
call within 30cm
Picture 1.
Picture 2.
Picture
3. VP-D surface mounted wires acc
3.
the
andard
1. With
hex
the standard
wrench open
hex wrench
the
screw
open
under
the the
screw
front
under
cover
theFix
front
cover
the back. Adjust the volume of the outdoo
(picture 1).
140~170CM
plate
for
marking
family
name
or name
room
thenthen
eme
2.name
Take
plate
off the
forname
marking
platefamily
for marking
name
or
family
room
name,
orname,
then
room name,
late.
me
plate.
fix the name plate.
3
4
4
4
5
30.0CM
5
5
140~170CM
140~170CM
140~170CM
call within 30cm
call within 30cm
3. Fix the VP-D surface mounted wires according to the wiring diagram on
5
call within 30cm
the back. Adjust the volume of the outdoor camera to suitable (picture 3).
30.0CM
30.0CM
Installation
aera
Installation
2
2
6. DOOR STATION INSTALLATION
A. SURFACE MOUNTED
wrench
open
the
screw
under
the
cover high from floor level. Do not install the camera facing
ench
open
thethe
screw
under
frontfront
cover
4.
Install
door
station
atthe
approximately
150-170cm
towards direct sunlight or rain.
5. Fix the outdoor camera on the wall and then fix the screws (picture 5).
for marking
family
name
or room
name,
ore marking
family
name
or room
name,
thenthen
6. Reattach the front cover and insert the screw with the hex wrench supplied (picture 6).
4
140~170CM
5
call within 30cm
call within 30cm
150-170cm
140~170CM
5
4. Install the outdoor camera at a height of 1.4m-1.7m, and make sure it
30.0CM
30.0CM
avoiding the
direct sunshine or rain .
Picture
4.
5. Fix wires
the
outdoor
camerato
onthe
the
wall5.wiring
anddiagram
then
fix the
mounted
wires
according
toPicture
the
diagram
on (picture 5).
nted
according
wiring
onscrews
olume
of the
outdoor
camera
to suitable
(picture
me
of the
outdoor
camera
to suitable
(picture
3). 3).
6
Picture
6. Cover
the6. top of the surface cover with buckle, then with the standard
hex wrench fix the screws (picture 6).
B. Flush mounted
1
2
1. With the standard hex wrench open the screw of the front cover (picture 1).
2. Take off the name plate for marking family name or room name, then fix
the name plate.
4
call within 30cm
140~170CM
3
30.0CM
5
6
hex wrench fix the screws (picture 6).
avoiding the direct sunshine or rain .
outdoor
cameracamera
at a height
1.4m-1.7m,
sure
itFlush
5.the
Fix
the outdoor
onofthe
wall and and
thenmake
fix the
screws
(picture
5).
B.
mounted
ng the direct sunshine or rain .
1
2
e6 outdoor camera on the wall and then fix the screws (picture 5).
6. DOOR STATION INSTALLATION
B. FLUSH MOUNTED
ace
covercover
with buckle,
then then
with with
the standard
surface
with buckle,
the standard
1. With the standard hex wrench open the screw of the front cover (picture 1).
screws
(picture
6). 6).
(picture
2. Take off the name plate for marking family name or room name, then fix the name plate.
3.At a height of 150-170cm, create a hole of 93W x 144.5H x 38D mm in size to fit the wall box in the wall.
Withthe
the
standard
hex wrench open the
6. CoverEnsure
the top
of the
surface
cover
buckle,
then1.with
standard
to avoid
facing
the door
stationwith
towards
direct sunlight
or rain
(picture
4)
the
top
of the surface cover with buckle, then with the standard
2. Take
2 wrench fix the screws (picture 6).
hex
offinthe
name
platebracket.
for marking
4.Fix 2the flush mounted wall box in the hole, then put the outdoor camera
the flush
mounted
rench fix the screws (picture 6).
fam
the name plate.
B. Flush mounted
h mounted
2
2
3
4
openopen
the screw
of theoffront
covercover
(picture
1). 1).
xnch
wrench
the screw
the front
(picture
marking
familyfamily
namename
or room
name,
then then
fix fix
te
for marking
or room
name,
call within 30cm
150-170cm
140~170CM
1
30.0CM
Picture 1.hex wrench open the
Picture
2.
3.
he standard
screw
of the front cover (picture
1). Picture
3. At
a height
of 1.4m-1.7m,dig a 93 x144.
1. With the standard hex wrench open the screw of the front cover (picture 1).
ff the name plate for marking family name or room name, then fix
it avoiding
2.
Take off the name plate
for5 marking family name or roomsure
name,
then fix the direct sunshine or rain
5
me 4plate.
6
the name plate.
4
4
5
call within 30cm
call within 30cm
140~170CM
3
5
Fix thePicture
flush6.mounted bracket of the outdoor camera in the hole on wall
4.
5. wall, and
ig
a 30.0CM
93Picture
x144.7
x38mm
hole Picture
in the
7m,dig
a
93
x144.7
x38mm
hole
in the wall,4.make
and
make
by tightening screws, then put the outdoor camera in the flush mounted
eight
of or
1.4m-1.7m,dig
a 93 x144.7 x38mm hole in bracket
the wall,
and 5make
nshine
rainor(Picture4).
ect
sunshine
rain (Picture4).
(Picture
、6).
30.0CM
avoiding the direct sunshine or rain (Picture4).
3. At a height of 1.4m-1.7m,dig a 93 x144.7 x38mm hole in the wall, and make
6.Notices of Wiring Diagram
sure it avoiding the direct sunshine or rain (Picture4).
The video door phone kit includes 15 meters wire. If wanting extension to 1550 meters, please use the 5×0. 5mm2 wire; If wanting extension to 50-100 meters,
please use the 5×0.75mm2wire.
1. VP-702DSD / VP-702D+SD Wiring Diagram
1.Audio Wire 2.Ground Wire 3.Video Wire 4.Power Wire
ABCD12347
7
Lock
+
7.SD wire
PAN790 WIRING - ONE DOOR to ONE MONITOR
ABCD12347
+
Lock
Outdoor Camera
TERMINAL LEGEND:
1 (A) Audio
4 (D) Power 15V DC
2 (B) Ground
5 Lock +12V DC
3 (C) Video
6 Lock Ground
Indoor Monitor
7 Picture Memory
RECOMMENDED CABLE (based on distance between door & last monitor):
0-50m = CAT-5
> 51-100m = RG59 Coaxial + 4 Core 14/020
CAT 5 TERMINATION CONFIGURATION:
From Door to Monitor
1.
2.
3.
4.
7.
8
Blue
Blue/White, Brown/White,
Green/White, Orange/White
Green
Brown
Orange
PAN790 WIRING - ONE DOOR to THREE MONITORS
ABCD 12347
+
Lock
Outdoor Camera
ABCD 12347
Indoor Monitor A
+
ABCD 12347
Indoor Monitor B
TERMINAL LEGEND:
1 (A) Audio
4 (D) Power 15V DC
2 (B) Ground
5 Lock +12V DC
3 (C) Video
6 Lock Ground
+
Indoor Monitor C
7 Picture Memory
RECOMMENDED CABLE (based on distance between door & last monitor):
0-50m = CAT-5
51-100m = RG59 Coaxial + 4 Core 14/020
CAT 5 TERMINATION CONFIGURATION:
From Door to 1st monitor
1.
2.
3.
4.
7.
Blue
Blue/White, Brown/White,
Green/White, Orange/White
Green
Brown
Orange
From monitor to monitor.
A.
B.
C.
D.
Blue
Blue/White, Brown/White, Green/White
Green
Brown
9
PAN790 WIRING - THREE DOORS to FOUR MONITORS
Indoor Monitor A
ABCD12347
Indoor Monitor B
+
ABCD12347
+- DCBA
Indoor Monitor C
+
+- DCBA
ABCD12347
+- DCBA
Indoor Monitor D
+
ABCD12347
+
+- DCBA
VP-716KZ
13.5V DC
12347
12347
Lock
Outdoor Camera A
12347
Lock
Outdoor Camera B
TERMINAL LEGEND:
1 (A) Audio
4 (D) Power 15V DC
2 (B) Ground
5 Lock +12V DC
3 (C) Video
6 Lock Ground
Lock
Outdoor Camera C
7 Picture Memory
RECOMMENDED CABLE (based on distance between door & last monitor):
0-50m = CAT-5 + FIG8
51-100m = RG59 Coaxial + 4 Core 14/020
CAT 5 TERMINATION CONFIGURATION:
From Door to Controller
1.
2.
3.
4.
7.
10
Blue
Blue/White, Brown/White,
Green/White, Orange/White
Green
Brown
Orange
From Controller to Monitor.
A.
B.
C.
D.
+
-
Blue
Blue/White, Brown/White, Green/White
Green
Brown
Fig 8
Fig 8 Trace
8. OPERATING INSTRUCTION
MODE BUTTON
Pressing the MODE button allows the user to scroll through options.
1st Press = System Info
2nd Press = Internal Memory View
3rd Press = SD Card Memory View
4th Press = Time & Date Setup
Further presses will scroll though time & date setup.
SETTING TIME & DATE
Press the MODE button 4 times to enter time setting mode.
To change the numbers, press the BROWSE button.
Use the MODE button to scroll to next section and BROWSE button to change the numbers.
Once completed, press the MONITOR button to return to standby.
CALL
When the doorbell is pressed, the internal monitors will chime and the image of the entry should appear.
Press the TALK button to talk to the visitor at the entry.
Press UNLOCK to release the door strike
To turn off the monitor, press TALK button again
PICTURE MEMORY
Monitors are able to record in 2 ways:
1) Taking a picture when doorbell is pressed
In this mode, pictures are stored in the internal memory.
Approximately 80 pictures can be saved in the internal memory.
Once it has reached full capacity, the oldest picture will be overwritten.
To manually delete, press the DELETE button to delete a picture or press & hold the delete button for 3sec
to remove ALL the pictures
Internal memory pictures CANNOT be exported to PC.
2) Recording picture automatically when there is movement in front of the door camera
In this mode, the motion recording is stored in the micro SD card.
Approximately 10,000 pictures can be stored on a 1GB card. The max size supported is 16GB.
Once it has reached full capacity, the oldest picture will be overwritten.
You can only delete ALL pictures from the micro SD card. To do this, press & hold the delete button for
3sec to remove ALL the pictures.
To export SD Card memory, insert the SD card into the PC via card reader or adaptor (not supplied).
Open the video player software on the SD Card and select the .tag file to review the recordings.
Individual snapshot .jpeg files can be saved by double clicking on the selected frame.
MEMORY PLAYBACK
To view recorded images, press the MODE button to the selected memory you wish to view (internal or SD
Card).
Use the BROWSE button to scroll through images
11
8. OPERATING INSTRUCTION
Press MONITOR to return to standby
MONITORING
To activate the door camera to monitor outside, press the MONITOR button.
To talk, press the TALK button.
To deactivate, press the MONITOR button again.
INTERNAL INTERCOM
When more than 1 monitor is installed, to call other monitors press the INTERCOM button.
Other monitors will ring.
To communicate, the receiver must press the TALK button.
Press the TALK button to return to standby after conversation.
GENERAL PAGING
When more than 1 monitor is installed, there is a general paging feature.
To do this press & hold the INTERCOM button for 4 seconds.
An acknowledgment tone can be heard and a flashing blue light will be activated on the right
side of monitor.
All audio channels are now open.
Press TALK to return to standby.
BABY MONITORING
To enter baby monitoring mode, go to the monitor you wish to activate.
Press Internal Intercom button to generate a call.
Go to monitor you wish to monitor from.
Press and hold the TALK button for 4 seconds.
An acknowledgement beep can be heard.
One way audio is now activated between 2 monitors. Press TALK to return to standby.
MUTE
To mute a monitor, go to the monitor you wish to mute.
Press and hold the UNLOCK button for 4 seconds.
An acknowledgement beep can be heard and a blue light will be activated on the right side of monitor.
When door bell is pressed, only the picture will activate without any call tones.
To unmute, press & hold the UNLOCK button for 4 seconds until an acknowledgement beep is heard.
RINGTONE ADJUSTMENT
Press and hold the MONITOR button for 4 seconds.
An acknowledgement beep can be heard.
Press the MONITOR button again to scroll through ringtones.
Press the TALK button to adjust ring volume.
Press UNLOCK button to confirm.
12
9. ACCESSORIES
Surface Door Camera – PAN790SC
Central Controller – PAN790DC
Flush Door Camera – PAN790FC
Electric Strike – GEMGK310
Additional Monitor - PAN790M
10. NOTICES
1. Do not install the indoor monitor in areas of high temperature or high humidity.
2. Do not install the indoor monitor directly next to or behind power points, light switches or near TV’s.
3. Always maintain 50mm separation between intercom cable and 240V cable.
4. Do not touch the monitor screen with wet hands.
5.Use only soft cloth to clean the monitor screen or camera in order to get a clear image. Please do not use dish
washing liquid, cleaning chemicals or corrosive liquid to clean.
6. Please avoid throwing or hitting the units.
7.Do not install the door stations directly facing the sun. If installed in such a manner, a white picture may
appear.
8. Wireless communication equipment may cause the image to be fuzzy due to interference from radio waves.
13
11. WARRANTY & LIABILITY
1.PSA Products Pty Ltd (ABN: 99 076 468 703) of 17 Millicent Street, Burwood 3125 Victoria, Australia
warrants this product for a period of two years from the date of purchase, as reflected on the Authorised
Reseller’s or Distributor’s invoice / receipt provided to you. PSA Products Pty Ltd will repair or replace the
product (at the option of PSA Products) due to any manufacturing defect, at the cost of PSA Products Pty
Ltd (excluding any labour costs relating to removal or re-installation of product, and transport costs).
2. This warranty shall not apply to the product if it has been damaged, modified, abused or altered after the
date of purchase, or if it fails to operate due to improper maintenance.
3.To the extent permitted by law, the liability of PSA Products Pty Ltd arising from the sale or under the
terms of this limited warranty shall not in any case exceed the cost of replacement and subject to this
clause. In no case shall PSA Products Pty Ltd be liable for consequential loss or damages resulting from the
failure of the product or breach of this, or: Any other warranty, express or implied, loss or damage caused
by failure to abide by the instructions supplied in the leaflets.
4.To the extent permitted by law, PSA Products Pty Ltd., makes no warranty, expressed or implied, written
or oral, including that of merchantability or fitness for any particular purpose, with respect to the
consumer replaceable battery if any. A product with non-serviceable built-in battery is covered under
warranty of the product as per point 1.
5.This warranty is provided in addition to other rights and remedies you have under law: Our goods come
with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure. What constitutes a major failure is set out in
the Australian Consumer Law.
6.To make a claim under warranty, take the product (with a proof of purchase) to the store where you
purchased the product or contact PSA Products Pty Ltd. Phone (03) 9888 9889. or Email: enquiry@
psaproducts.com.au with details, proof of purchase or expense claim in writing.
14
15
psaproducts.com.au
1300 772 776
enquiry@psaproducts.com.au
Choose
for intercoms
FIRE • SECURITY • INTERCOMS
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising