Kramer Electronics 1

Kramer Electronics 1
3.5mm to Dual IR Emitter Cable
Kramer’s C−A35/2IRE is a dual infrared
emitter permanently mounted on a 3m (10ft)
Application - Use the C−A35M/2IRE with any remote control system that has a port for transmitting IR control
information via hard wire. The 3m (10ft) cable is terminated with a 3.5mm mini connector that can be removed if
needed. The transparent emitters adhere to the IR receiving device with double−sided tape.
Kramer Control System - Use this IR emitter with Kramer RC series remote control panels.
Length - Available in a 3m (10ft) version.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF