19772 iPad stand Product variant 19772-300-55 - black Data Adjustment stepless Angle of inclination 0° to 90° Bearing plate 252.1 x 195.4 mm Height from 700 to 1,550 mm Material plastic, steel Max. load capacity 1 kg Special features iPad is easily clipped into the holder; dock-connector and headphone jack are accessible; freely rotates 90°; suitable for iPad 2nd, 3rd or 4th generation Swivel 90 º Type black Weight 2.64 kg The combination of stand and iPad holder is great to use on stage, at home or in the studio. The iPad (2nd, 3rd or 4th generation) is easy to clip in and out of the holder. Tilt is adjusted with an ergonomic clamping screw. The iPad can of course be turned to either the vertical or horizontal position and slip is prevented. The simple stand, which telescopes in 2 sections, can be adjusted to any height between 70 and 155 cm. It folds to a small compact size, which is easy to transport.