Catalogue

Catalogue
AX
AX-1S/AX-2S/AX-3S/AX-4S/AX-18SUB/AX-218SUB
www.pacxan.com
SYSTEM
> CATALOGUE PAGE 13
> CATALOGUE PAGE 14
AX
AX Seris is full range loudspeaker with external frequency divider
. It is specially designed for long distance performance, with high
SPL, low distortion, tight structure and easy array. It is publicly
www.pacxan.com
used for stadium, outdoor sport field, large own performance.
AX-1S
AX-3S
AX-1S is designed in 3 unit and 3-way with external frequency divider. LF adopts 12” high power high SPL
AX-3S is designed with 3-way and 3 unit with external frequency divider, full horn structure. MF is
driver. Bass horn technology increases SPL in the full frequency range. MF adopts 6.5” new material unit,
precisely designed in bomb-shape phrase circle, to match accurately with diaphragm of a 10” MF unit. LF
precise phase circle, reduces the interference of emission from conical diaphragm and the anti-dust cap, it
is also precisely designed in bomb-shape phrase circle, to match accurately with diaphragm of a 15” bass
makes the MF quite more clearly and reduces distortion to lowest. HF adopts a 1.75” compress driver, with
unit, to reach very good frequency respone. HF adopts a 60x40 degree eternal direction horn, matched
high sensibility, clear sound and high resolution. AX-1S is a good choice for large cutrual performance and
with a 3” high power HF driver, it also performs perfectly, no matter in fixed installtion or array performance
show hall.
in large own field.
AX-2S
AX-2S with tight and solid box structure to supply strong, smooth frequency respone curve, to fix sound
accurately, to control phase interference and distortion in a very small range. With expectable highperformance for the engineer and acoustics designer, AX-2S is actual a perfect acoustic product. With
AX-4S
Simple and beautiful appearance, it can be used widely. Matched with PacXan digital processor, it can get
smooth frequency and phase respone, so reach the best condition, no matter in fixed installtion or own
use.
Small volume
light weight Hanging convenience is a prominent feature of AX-4S Carefully
designed to facilitate the location of the hanging system, adjustable angle bring great convenience
for the installation
AX-4S is using a 44mm treble driver and a 15-inch bass unit , The composition
of external two-way system, full horn structure
15” LF horn and HF part of the direct-phase
HF
part of the use of a 45X45-degree conical horn with a high-performance 2” high-power driver
achieves high sensitivity 112dB good performance in HF good directional performance
pressure balance
sound
quick installation of hanging pieces. Applications in large occasions the
composition of the array can be easily
particularly suitable for large scale sports stadiums major
theme parks and large-scale sound reinforcement Cultural Square
AX-1S
AX-2S
AX-3S
AX-4S
AX
AX Seris is full range loudspeaker with external frequency divider
. It is specially designed for long distance performance, with high
SPL, low distortion, tight structure and easy array. It is publicly
used for stadium, outdoor sport field, large own performance.
AX-18S+
AX-18S+ is horn stucture subwoofer. It adopts 18” new aluminum alloy voice coil unit. With high power,
high SPL, quickly LF response, it will match perfectly with AX-2S.
AX-218SUB
AX-218SUB is horn stucture subwoofer. It adopts the latest 21” bass driver which is researched and
developed by engineer of PacXan. Solid aluminum alloy diaphragm matched withФ320mm magnet
andФ150mm silvering aluminum voice coil, the power can reach 800W, the LF can reach to below 26Hz.
CX
Strong LF matched with AX full range loudspeaker, will amaze you.
CX-1202/CX1502/CX-2152/CX-1801B/CX-2182B
www.pacxan.com
AX-18S+
AX-218SUB
CX
CX series is designed for kinds of show room, DISCO, small
outdoor performance. It utilizes long horn with high power, high
SPL to control well of the emission and it is suitable for array.
www.pacxan.com
With high transfer-efficiency aluminum voice coil unit, it performs
well and easily under high power. Its strong LF and clear MF/HF
are liked by lots of professional workers.
CX-1202
CX-2152
CX 1202 is 2-way passive full range loudspeaker. With 12” aluminum frame and aluminum voice coil,
CX 2152 is a three-unit two-way full range loudspeaker, it is made of 2x15” bass unit
matching to HF unit with large ux magnet and high SPL, and optimized design for separated frequency
with high power high SPL silvering aluminum voice coil, and a 3” Ф75mm treple
network inside, to be with higher transient response and lower distortion, to make the people's sound and
compress driver, with optimized design frequency divider inside. The wide coverage
MF/LF broadcasting clear and natural, so it is suitable for singing hall, disco, stadium and other kinds of
100°x50° makes it get sound reinforcement in a large range. So it is suitable to be as
performance.
sound reinforcement for large audio projects, and own performance.
CX-1502
CX 1502 is a representative of 15” two-way full range loudspeaker. LF is full and solid. HF adopts a high
power unit with 3” voice coil, to make the HF broadcast far away, with balance coverage, and make the
sound stronger. It is the best choice for sound reinforcement of stadium, disco, and other kinds of
performance.
CX-1202
CX-1502
CX-2152
CX
CX series is designed for kinds of show room, DISCO, small
outdoor performance. It utilizes long horn with high power, high
SPL to control well of the emission and it is suitable for array.
With high transfer-efficiency aluminum voice coil unit, it performs
well and easily under high power. Its strong LF and clear MF/HF
are liked by lots of professional workers.
CX-1801B
CX 1801B is a 18” subwoofer. It uses new bass unit to reach the LF point of 30Hz. Matching with CAD high
Q value box, it enhances greatly the energy-transfer efficiency and the broadcasting distance. So to
makes the LF with more elastic and more surrounded feeling. It will broadcast more perfectly if it is used
together with CX 1202 and CX 1502.
CX-2182B
CX 2182B is a double 18” subwoofer. It is designed in push-pull way, with 1000W high power, with new
PS
bass unit. Matching with CAD high Q value box, it enhances greatly the energy-transfer efficiency and the
broadcasting distance. The LF is with good elastic and big power. It will perform better if it is used together
with CX 1502 and CX 2152 full range loudspeaker.
PS-10F/PS-12F/PS-15F/PS-15FX
www.pacxan.com
CX-1801B
CX-2182B
PS
PS series is a multi-functional and non-symmetrical horn loaded
full range loudspeaker. Considering the practical usage, we have
designed out two styles of 60°and 40°for putting. The HF drivers
www.pacxan.com
can be rigging and the LF drivers have adopted new material.
For example the conical diaphragm coverage are all used of
special material to make the hearing tender and uent.
This
series are suitable for meeting rooms and studio, theatres,
monitoring stage.
PS-10F
PS-15F
PS 10F series is made of a 10”LF unit and a HF Ф34mm unit, adopts non-symmetrical horn
PS 15F series is made of a 15”LF unit and a HF Ф44mm unit, adopts non-symmetrical
loaded. Considering the practical usage, we have designed out two styles of 60°and 40°for
horn loaded. Considering the practical usage, we have designed out two styles of 60°and
putting. The HF drivers can be rigging and the LF drivers have adopted new material. For
40°for putting. The HF drivers can be rigging and the LF drivers have adopted new
example the conical diaphragm coverage are all used of special material to make the
material. For example the conical diaphragm coverage are all used of special material to
hearing tender and uent.
make the hearing tender and uent. This series are suitable for meeting rooms and
This series are suitable for meeting rooms and studios ,
studio, theatres, monitoring stage.
theatres, monitoring stage.
PS-15FX
PS-12F
PS-15FX is a classical stage mornltor. With 15" high power LF speaker and 2" HF driver
44mm voice coll, to get large dynamic frequency range, make LF strong and powerful.
PS 12F series is made of a 12”LF unit and a HF Ф44mm unit, adopts non-symmetrical horn
loaded. Considering the practical usage, we have designed out two styles of 60°and 40°for
There are 2 options for placing, which make it more conventent for achoice on coverage
putting. The HF drivers can be rigging and the LF drivers have adopted new material. For
range of stage aound reinforcement.It is convenient for carrying and transport, and is liked
example the conical diaphragm coverage are all used of special material to make the
by persons who need to move showing.
hearing tender and uent. This series are suitable for meeting rooms and studio, theatres,
monitoring stage.
PS-10F
PS-12F
PS-15F
PS-15FX
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement