Digital TV mode
Customer’s Record
The model number and serial number of this product may be found on its rear panel. You should note
the model number and the serial number in the space provided below and retain this book, plus your
purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft
or loss, and for Warranty Service purposes.
Model Number
Serial Number
M0710-0
Web Site: http://panasonic.net
© Panasonic Corporation 2010
Printed in U.S.A.
TC-P50S20H
Operating Instructions
50” Class 1080p Plasma HDTV
(49.9 inches measured diagonally)
Thank you for purchasing this Panasonic product. Please read these
instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
English
TQB2AC0021
Experience an amazing level of
multimedia excitement
Receive digital terrestrial services using an integrated Digital TV tuner
Sharp pictures with HDMI terminal
Create home theatre and DVD recorder link-ups with “VIERA Link”
without complicated settings!
Enjoy rich multimedia
VCR
SD Card
Camcorder
Amplifier with
Speaker System
Personal
computer
DVD Recorder
DVD player
Set top box
Standard accessories
Check that you have the accessories and items shown
Remote Control
● N2QAYB000498
POWER
SAP
TV
MENU
AV
SURROUND SD CARD
PC
INFO
EXIT
OPTION
R
Batteries for the
Remote Control (2)
● R6 (AA)
Pedestal
p. 6
Mains Lead
p. 8
RETURN
G
Y
B
ASPECT P-NR OFF TIMER STILL
LAST
MUTE
POWER
CH
REC
Operating Instructions
● This product contains possibly dangerous parts (such as plastic bags), which can be breathed in or
swallowed by young children accidentally. Keep these parts out of reach of young children.
2
Contents
Be sure to Read
●Safety Precautions ···································· 4
Quick Start Guide
●Accessories / Options ······························· 6
●Basic Connection ······································ 8
●Identifying Controls ································· 10
●Auto Tuning ············································· 12
Open
1
Hook
2
Close
Advanced Features
●How to Use VIERA TOOLS····················· 20
●How to Use Menu Functions ··················· 21
●Tuning and Editing Channels ·················· 28
●Child Lock ··············································· 32
●Input Labels ············································ 33
●Shipping Condition (Reset settings)········ 34
●Updating the TV Software ······················· 35
●Using Media Player ································· 36
●VIERA Link Functions ····························· 43
●External Equipment································· 48
Advanced
Inserting and removing remote’s
batteries
Technical
●Technical Information ······························ 50
●Licence···················································· 52
●Maintenance ··········································· 53
●FAQs ······················································· 53
●Specifications ·········································· 55
Technical
Basic Features
●Watching TV············································ 14
●Using TV Guide (Digital TV mode)·········· 17
●Watching External inputs ························ 18
Quick Start
Guide
(Warning / Caution)
Basic
This product is licensed under the AVC patent
portfolio license for the personal and noncommercial use of a consumer to (i) encode
video in compliance with the AVC Standard
(“AVC Video”) and/or (ii) decode AVC Video
that was encoded by a consumer engaged
in a personal and non-commercial activity
and/or was obtained from a video provider
licensed to provide AVC Video. No license is
granted or shall be implied for any other use.
Additional information may be obtained from
MPEG LA, LLC. See http://www.mpegla.com.
Note the correct polarity (+ or -)
● Incorrect installation may cause battery
leakage and corrosion, resulting in damage
to the remote control.
● Do not mix old and new batteries.
● Do not mix different battery types (such as
alkaline and manganese batteries).
● Do not use rechargeable (Ni-Cd) batteries.
● Do not burn or breakup batteries.
Batteries must not be exposed to excessive
heat such as sunshine, fire or the like.
● Do not disassemble or modify the remote
control.
3
Safety Precautions
Warning
Handling the mains plug and lead
● Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat
and cause fire.)
● Ensure that the mains plug is easily accessible.
● Ensure the earth pin on the mains plug is securely connected to prevent electrical shock.
● Do not touch the mains plug with a wet hand. (This may cause electrical shock.)
● Do not use any mains lead other than that provided with this TV. (This may cause fire or
electrical shock.)
● Do not damage the mains lead. (A damaged lead may cause fire or electrical shock.)
• Do not move the TV with the lead plugged in the socket outlet.
• Do not place a heavy object on the lead or place the lead near a high-temperature object.
• Do not twist the lead, bend it excessively, or stretch it.
• Do not pull on the lead. Hold onto the mains plug body when disconnecting lead.
• Do not use a damaged mains plug or socket outlet.
If you find any
abnormality, remove
the mains plug
immediately!
Power source
● This TV is designed to operate on
AC 110 - 120 V, 50 / 60 Hz
Do not remove covers and NEVER modify
the TV yourself
● Do not remove the rear cover as live parts
are accessible when it is removed. There
are no user serviceable parts inside. (Highvoltage components may cause serious
electrical shock.)
● Have the TV checked, adjusted, or repaired
at your local Panasonic dealer.
Do not expose to rain or excessive
moisture
● To prevent damage which might result in
electric shock or fire, do not expose this TV
to rain or excessive moisture. This TV must
not be exposed to dripping or splashing
water and objects filled with liquid, such as
vases, must not be placed on top of or above
the TV.
Do not expose to direct sunlight and
other sources of heat
● Avoid exposing the TV to direct sunlight and
other sources of heat. To prevent fire never
place any type of candle or naked flame on
top or near the TV.
4
AC 110 - 120 V
50 / 60 Hz
Do not insert foreign objects into the TV
● Do not allow any objects to drop into the TV
through the air vents. (Fire or electrical shock
may result.)
Do not place the TV on sloped or
unstable surfaces
● The TV may fall off or tip over.
Use only the dedicated pedestals /
mounting equipment
● Using an unapproved pedestal or other
fixtures may make the TV unstable, risking
injury. Be sure to ask your local Panasonic
dealer to perform setup.
● Use approved pedestals (p. 6) / wall-hanging
brackets (p. 7).
Do not allow children to handle SD Card
● As with any small object, SD Cards can be
swallowed by young children. Please remove
SD Card immediately after use and store out
of reach of children.
Caution
■ This appliance is intended for use in tropical climates
■ When cleaning the TV, remove the mains plug
● Cleaning an energized TV may cause electrical shock.
■ When the TV is not going to be used for a long period of time, remove the mains plug
● This TV will still consume some power even in the Off mode, as long as the mains plug is still
connected to a live socket outlet.
■ Transport only in upright position
● Transporting the TV with its display panel facing upward or downward may cause damage to the
internal circuitry.
■ Allow sufficient space around the TV for radiated heat
10
10
10
7
● When using the pedestal, keep a space between the bottom
of the TV and the surface where the TV is set.
● In case of using Wall-hanging bracket, follow the manual of it.
(cm)
Minimum distance
■ Do not block the rear air vents
● Blocked ventilation by newspapers, table cloths, curtains, etc. may cause overheating, fire or
electrical shock.
■ Do not apply strong force or impact to the display panel
● This may cause damage resulting in injury.
■ Do not expose your ears to excessive volume from the headphones
● Irreversible damage can be caused.
■ The TV is heavy. Handle the TV by 2 or more people.
Support as shown to avoid injury by the TV tipping or falling.
■ Auto power standby function
● The TV will automatically go to Standby mode in the following conditions:
• no signal is received and no operation is performed for 30 minutes in Analogue TV mode
• “Off Timer” is active (p. 14)
• no operation is performed for the period selected in “Auto Standby” (p. 27)
■ Keep the TV away from these types of equipment
● Electronic equipment
In particular, do not place video equipment near the TV. Electromagnetic interference may distort
images / sound.
● Equipment with an infrared sensor
This TV also emits infrared rays. This may affect operation of other equipment.
Do not display a still picture for a long time
This causes the image to remain on the plasma screen (“image retention”).
This is not considered a malfunction and is not covered by the warranty.
Typical still images
● Programme number and other logos
● Image displayed in “4:3” mode
● Video game
● Computer image
To prevent image retention, contrast is lowered automatically after a few minutes if no signals are
sent or no operations are performed. (p. 53)
5
Accessories / Options
Attaching the pedestal
Do not disassemble or modify the pedestal.
● Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal for any other TV or displays.
● Otherwise the TV or the display may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
● If you use the pedestal while it is physically damaged, personal injury may result. Contact your
nearest Panasonic dealer immediately.
During set-up, make sure that all screws are securely tightened.
● If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal
will not be strong enough to support the TV, and it might fall over and become damaged, and
personal injury may result.
Ensure that the TV does not fall over.
● If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over
and personal injury may result.
Two or more people are required to install and remove the TV.
● If two or more people are not present, the TV may be dropped, and personal injury may result.
Assembly screw (4)
(silver)
Assembly screw (4)
(black)
Pole (2)
L
M5 × 18
Base
R
M5 × 30
Assembling the pedestal
Use the assembly screws
to fasten the left and
right poles
to the base
securely.
● Make sure that the screws are securely tightened.
● Forcing the assembly screws the wrong way will
strip the threads.
● “L” or “R” mark is stamped on the bottom of the
pole.
A
-R
Front
- L
Securing the TV
Insert the pole into the TV, and then fasten securely
with the assembly screws .
● Tighten the four assembly screws loosely at first,
then tighten them firmly to fix securely.
● Carry out the work on a horizontal and level
surface.
B
Arrow mark
Hole for pedestal installation
D
[View from the bottom]
6
Optional accessories
Please contact your nearest Panasonic dealer to purchase the recommended optional accessories.
For additional details, please refer to the manual of the optional accessories.
Wall-hanging bracket
Rear of the TV
Screw for fixing the TV onto the wall-hanging
bracket (not supplied with the TV)
400 mm
300 mm
Holes for wall-hanging
bracket installation
Depth of screw:
minimum 15 mm,
maximum 30 mm
[View from the side]
Accessories / Options
Quick Start
Guide
● TY-WK4P1RW
● Using other wall-hanging brackets, or installing a wall-hanging bracket by yourself have the risk
of personal injury and product damage. In order to maintain the unit’s performance and safety, be
absolutely sure to ask your dealer or a licensed contractor to secure the wall-hanging brackets.
Any damage caused by installing without a qualified installer will void your warranty.
● Carefully read the instructions accompanying optional accessories, and be absolutely sure to take
steps to prevent the TV from falling off.
● Handle the TV carefully during installation since subjecting it to impact or other forces may cause
product damage.
● Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables
or pipes in the wall before hanging bracket.
● To prevent fall and injury, remove the TV from its fixed wall position when it is no longer in use.
7
Basic Connection
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting
any leads.
When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket
outlet first.
Connecting aerial
TV only
Rear of the TV
■Mains Lead
AC 110 - 120 V,
50 / 60 Hz
Push until both side
tabs click
Mains lead (supplied)
Make sure that
the mains lead is
securely fixed.
● To remove from the TV:
tabs
Press both tabs and
pull on mains connector
to release
Aerial
RF cable
● Do not put the RF cable close to the mains lead to avoid noise.
● Do not place the RF cable under the TV.
● To obtain optimum quality picture and sound, an aerial, the correct cable (75 Ω coaxial) and the
correct terminating plug are required.
● If a communal aerial system is used, you may require the correct connection cable and plug
between the wall aerial socket and the TV.
● Your local Television Service Centre or dealer may be able to assist you in obtaining the correct
aerial system for your particular area and the accessories required.
● Any matters regarding aerial installation, upgrading of existing systems or accessories required, and
the costs incurred, are the responsibility of you, the Customer.
● VIERA Link connection p. 44
● Other equipment connection p. 48, 49 and p. 54
● Read the manual of the equipment, too.
8
Connecting DVD Recorder / VCR
TV, DVD Recorder or VCR
Rear of the TV
Aerial
Quick Start
Guide
AC 110 - 120 V,
50 / 60 Hz
Basic Connection
Mains lead (supplied)
RCA cable
RF cable
DVD Recorder or VCR
RF cable
9
Identifying Controls
Remote control
13
POWER
SAP
1
2
TV
MENU
AV
SURROUND SD CARD
PC
INFO
EXIT
3
4
5
15
16
17
18
19
6
OPTION
RETURN
7
20
R
8
9
14
G
Y
B
ASPECT P-NR OFF TIMER STILL
21
22
23
10
11
LAST
24
MUTE
25
12
POWER
CH
26
REC
1 Standby On / Off switch
● Switches TV On or Off standby
2 Main Menu (p. 21)
● Press to access Picture, Sound and Setup
Menus
3 Channel / Programme Information (p. 15)
● Displays channel and programme
information
4 VIERA TOOLS (p. 20)
● Displays some special feature icons and
accesses easily
10
5 VIERA Link (p. 46)
● Accesses VIERA Link Menu
6 OK
● Confirms selections and choices
● Press after selecting channel positions to
quickly change programme
7 Option Menu (p. 15)
● Easy setting for viewing and sound options
8 Aspect (p. 16)
● Changes aspect ratio from Aspect
Selection list
● Also possible by pressing this button
repeatedly until you reach the desired
aspect
9 P-NR key
● Displays P-NR setting bar
10 Numeric buttons
● Changes channel
● When in Standby mode, switches TV On
11 Sound Mute
● Switches sound mute On or Off
12 Volume Up / Down
13 Input mode selection
● TV - switches Digital TV / Analogue TV
mode (p. 14)
● AV - switches to AV input mode from Input
Selection list (p. 18)
● PC - switches to PC input mode (p. 18)
14 SAP
● Selects Audio mode for TV viewing (p. 14)
15 Media Player (p. 36)
● Switches to SD Card and USB device
viewing / listening mode
16 Surround (p. 24)
● Switches surround sound setting
17 Exit
● Returns to the normal viewing screen
18 GUIDE (p. 17)
● Displays TV Guide
19 Cursor buttons
● Makes selections and adjustments
20 Return
● Returns to the previous menu / page
21 Coloured buttons
● Used for the selection, navigation and
operation of various functions
22 STILL
● Still picture (p. 14)
23 Off Timer (p. 14)
● Sets the time the TV automatically turns off
24 LAST
● Switches to previously viewed channel or
input modes
25 Channel Up / Down
● Selects channel in sequence
26 Connected equipment operations (p. 19)
5
6
7
8
9
1 23
10
11
12
1 Remote control signal receiver
● Do not place any objects between the TV
remote control signal receiver and remote
control.
2 C.A.T.S. (Contrast Automatic Tracking
System) sensor
● Senses brightness to adjust picture quality
when “Eco Mode” in the Picture Menu is
set to “On” (p. 23)
3 Power LED
● Standby: red / On: green
● When using the remote control, indicates
the TV has received a command.
4 Function Select
● Volume / Contrast / Brightness / Colour /
Sharpness / Tint (NTSC mode) / Bass
(“Music” or “Speech” mode in the Sound
Menu) / Treble (“Music” or “Speech” mode
in the Sound Menu) / Balance / “Digital
TV Auto Tuning” or “Analogue TV Auto
Tuning” (p. 28)
5 Increases or decreases the channel
position by one. When a function is already
displayed, press to increase or decrease the
selected function. When in standby mode,
switches TV on.
6 Changes the input mode
7 USB port
8 SD Card slot
9 HDMI3 terminal
10 Headphones jack
11 AV3 terminals
12 Mains power On / Off switch
● Switch On to turn on the TV or turn the TV
to Standby mode by the remote control
Identifying Controls
4
Quick Start
Guide
TV
Using the On Screen Displays
Many features available on this TV can be accessed via the On Screen Display menu.
Example (Sound Menu):
Sound Menu
Mode
Bass
Treble
Balance
Headphone Volume
Surround
Volume Correction
Speaker Distance to Wall
Reset to Defaults
Select
EXIT
Change
RETURN
Music
0
0
0
11
Off
0
Over 30cm
Reset
Page up
Page down
Operation guide will help you.
How to use remote control
MENU
Access the menu / store settings
after adjustments have been made or
options have been set
Open the Main Menu
Move the cursor / select the menu
item
RETURN
Move the cursor / adjust levels / select
from a range of options
EXIT
Return to the previous menu
Exit the menu system and return to the
normal viewing screen
11
Auto Tuning
Search and store TV channels automatically.
● These steps are not necessary if the setup has been completed by your local dealer.
1
Plug the TV into mains socket and switch On
● You can now use the remote control to turn On the TV or
switch the TV to standby mode. (Power LED: On)
2
Select your language
Idioma de menú
English
POWER
Español
Português
select
SAP
TV
MENU
AV
SURROUND SD CARD
set
PC
INFO
EXIT
3
Select the antenna input type
ANT in
RETURN
OPTION
Cable
R
G
Y
Antenna
select
B
ASPECT P-NR OFF TIMER STILL
set
Auto Tuning starts
Auto Tuning - Digital TV and Analogue
Digital TV Scan
CH 2
Analogue TV Scan
CH 2
This will take about 6 minutes.
CH
Channel Name
16
service 7
16
service 8
16
service 5
69
DIGITAL !!07.2
DIGITAL !!07.2
69
service name max20
69
Digital TV: 11
Analogue TV: 0
Searching
LAST
MUTE
POWER
69
69
Type
Digital TV
Digital TV
Digital TV
Digital TV
Digital TV
Digital TV
● Auto Tuning will start to search for
TV channels and store them.
The sorted channel order
depends upon the TV signal,
the broadcasting system and
reception conditions.
Quality
10
10
10
10
10
10
CH
REC
4
Select “Home”
Please select your viewing environment.
Home
Shop
∗
select
set
Auto Tuning is complete
12
∗Viewing environment mode
Home : Recommended mode for viewing at home. Select “Home” for optimal picture / power consumption.
“Viewing Mode” is set as “Normal” (p. 23).
Shop : Demonstration mode to explain main features of this TV (for in-store display). “Viewing Mode” is set as
“Dynamic” (p. 23).
Please select your viewing environment.
Home
Shop
You have selected shop mode
Automatic Demo
Off
RETURN
On
● To change viewing environment mode later on, reset all settings by accessing Shipping Condition.
“Shipping Condition” (p. 34)
Auto Tuning
RETURN
Shop
Quick Start
Guide
To return to viewing environment selection mode if you selected “Shop”
13
Watching TV
POWER
SAP
TV
MENU
1
AV
Turn power on
● Mains power On / Off switch should be
POWER
On (p. 11).
SURROUND SD CARD
PC
INFO
EXIT
2
Select Digital TV or Analogue TV mode
● Also possible to select the mode pressing the TV button
TV
OPTION
R
RETURN
G
Y
repeatedly on the remote control or side panel of the TV. (p. 11)
The selected mode is displayed.
Digital TV
B
ASPECT P-NR OFF TIMER STILL
1 Globo HD
20:35
event6
20:00 - 20:55
Now
CC
3
All Digital Channels
Select favourites
For info press
Text
SAP
Select a channel
up
LAST
MUTE
down
or
Information banner appears whenever you
select a channel
● For details p. 15
● To select the two or three-digit channel
number, e.g. 112
e.g. 39
POWER
CH
to standby, there will be a
clicking sound after a short
delay. This is normal.
changes
(quickly
)
the channel
● To select from the Channel List
All Digital Channels
● When the TV is switched
1
2
3
4
5
6
7
Cartoon Nwk
BBC Radio Wales
BBC Radio Cymru
BBC ONE Wales
BBC THREE
BBCi
CBBC Channel
Select a channel using information banner (p. 15)
Possible to confirm the programme name
before selecting channels.
Display information banner
While the banner
if it is not displayed
is displayed,
INFO
select a channel
select a channel
watch
Select a channel using TV Guide (Digital TV mode) (p. 17)
Possible to confirm the TV Guide (EPG) before
selecting channels.
Display TV Guide
Select a channel
select
select
Possible to set display timeout in
“Banner Display Timeout” (p. 26).
(in a short time)
● If one or two-digit channel number,
watch
watch
Other useful functions
Display the SUB MENU listen with SAP (Secondary Audio Program) STILL
SAP
Selects Audio mode for watching TV
Digital TV mode
Switch the audio signal (if available).
(Audio 1 / Audio 2 / Audio n …)
Analogue TV mode
Select the desired audio mode.
(Stereo / SAP / Mono)
STILL
Freeze / unfreeze picture
Off Timer
Turn the TV off automatically after a fixed period of time (0 / 15 / 30 / 45 / 60 / 75 / 90 minutes)
OFF TIMER
Press repeatedly until desired time appears.
● Also possible to set the time from “Off Timer” in the Setup Menu (p. 25)
● To cancel Set to “0” or turn the TV off.
● To display the remaining time Information banner (p. 15)
● When the remaining time is within 3 minutes, the remaining time
will flash on screen.
14
Other useful functions
Display information banner
Display information banner
INFO
● Also appears when changing a channel
Channel position and name
Current time
Example (Digital TV mode)
20:35
event6
20:00 - 20:55
Now
All Digital Channels
Select favourites
For info press
Subtitle
SAP
45
Programme Start / Finish time
Example (Analogue TV mode)
1 BBC
CH02
23:35
All Analogue Channels
NTSC
Watching TV
Programme
1 Globo HD
45
Channel Status
Sound mute On
● To watch the programme listed in the banner
● Information on the next programme
(Digital TV mode)
● To select a favourite list (Digital TV mode)
(
if the favourite list is created
in “Favourites Edit” p. 29
● To hide
)
EXIT
● Extra information
(press again to hide the banner)
(Digital TV mode)
Basic
Features available /
Message meanings
● To confirm another tuned channel name
Dolby D
Dolby Digital audio track
(Digital TV mode)
CC
Closed caption service available
Subtitle
Subtitle service available
(Digital TV mode)
B
SAP
Audio mode available
1 - 90
Off Timer remaining time
● For settings p. 14
p. 14
INFO
● To set display timeout
“Banner Display Timeout” (p. 26)
Display the selectable settings for the current programme
OPTION
Check or change the current
programme status instantly
● To change
change
select
Multi Audio (Digital TV mode)
Allows you to select between alternative
language for sound tracks (if available)
Dual Audio (Digital TV mode)
Allows you to select stereo / monaural
(if available)
Subtitle (Digital TV mode)
Allows you to select to display subtitle on / off
(if available)
Channel Colour Set (Analogue TV mode)
Sets colour density
Picture Menu (p. 23)
Analogue CC (Analogue TV mode)
Allows you to select the analogue closed
caption (if available)
Volume Correction
Adjusts volume of individual programme or
input mode
Sound Menu (p. 24)
15
Watching TV
Other useful functions
Change aspect ratio
Enjoy viewing the picture at its optimum size and aspect.
ASPECT
Display Aspect Selection list
16:9
Just
4:3
4:3 Full
Zoom1
Zoom2
Zoom3
Select
Change
store
Aspect Selection
16:9
Just
4:3
4:3 Full
Zoom1
Zoom2
Zoom3
Aspect Selection
EXIT
RETURN
select
While the list is displayed,
select the mode
To change the mode using the ASPECT button only
ASPECT
Press repeatedly until you reach the desired mode
Just
16:9
Directly displays the image at “16:9”
without distortion (anamorphic).
4:3
Displays the image at the standard
“4:3” without distortion.
Zoom1
Displays a “16:9” letterbox or “4:3”
image without distortion.
Zoom3
Displays a “4:3” image full-screen.
Stretching is only noticeable at the
left and right edges.
4:3 Full
Displays a “4:3” image enlarged
horizontally to fit the screen.
● Digital TV mode or HD signal
Zoom2
Displays a “16:9” letterbox
(anamorphic) image full-screen
without distortion.
Displays a “2.35:1” letterbox (anamorphic)
image full-screen without distortion.
At “16:9”, displays the image at its maximum
(with slight enlargement).
● Only ”16:9” and “4:3 Full” are available in Digital TV mode.
● Only “16:9” and “4:3” are available in PC input mode.
● Aspect is fixed to “16:9” when “Viewing Mode” is set to “Game” in the Picture Menu.
● Aspect mode can be memorized separately for each SD (Standard definition) and HD (High
definition) signals except in Digital TV mode.
Change OSD language
You can change language for on screen displays.
MENU
Main Menu
access
Picture
Sound
select
Setup
Language
OSD Language
Access
access
select
Setup Menu
Off Timer
Child Lock
ANT in
Digital TV Tuning Menu
Language
Display Settings
VIERA Link Settings
System Menu
Other Settings
access
Off
select
Access
OSD Language
English
Português
select
set
16
Español
Using TV Guide enables you to select a programme easily, view programme information, etc.
TV Guide―Electronic Programme Guide (EPG) provides an on screen listing of the current and future
programmes over the next seven days depending on broadcasters.
View TV Guide
SAP
TV
MENU
AV
Each time pressed, the layout will be changed. (Landscape / Portrait)
SURROUND SD CARD
PC
INFO
EXIT
TV Guide time
Current date and time
TV Guide date
Programme Example:
Example:
RETURN
OPTION
R
G
Y
B
TV Guide: Landscape
2 World
ASPECT P-NR OFF TIMER STILL
10/03/2010 Wed 10:27
All Types
10/03/2010 Wed
1 Home
11:00 - 12:30 In Memory of Lydia Shum (R) (S)
Time: 11:00
11:30
12:00
In Memory of Lydia Shum (R) (S)
1 Home
ETV
3 Jade
Movie
4 Pearl
Market Update
China
All Digital Channels
12:30
13:00
W E Your Jun Mao Xia
Financial Information S CCTV9 – Live
Movie
Market Update
News
Market Update
Select channel
EXIT
Select programme
View
RETURN
-24 hours
+24 hours
Live
In Market Update Station Close
Info
GUIDE
Change display mode
Prog.Type
Favourites
TV Guide: Portrait
10/03/2010 Wed 10:27
12:30 - 14:00
W E Your Jun Mao Xia
14:00 - 14:30
Jin Mao Xiang (R) (C/M) (S)
14:30 - 15:00
Women Plaza ll
15:00 - 15:30
Wealth Blog
15:30 - 16:00
All Digital Channels
4 Pearl
Life Journey (R) (C/M)
16:00 - 16:30
Smart Class
16:30 - 16:45
News
Select programme
EXIT
Select channel
View
RETURN
-24 hours
+24 hours
Info
GUIDE
Page up
Change display mode
Prog.Type
Page down
Favourites
Portrait (Displays by time)
Landscape (Displays by channel)
LAST
All Types
10/03/2010 Wed
1 Home
2 World
3 Jade
11:00 - 12:30
In Memory of Lydia Shum (R) (S)
Channel position and name
Basic
POWER
Watching TV
Using TV Guide (Digital TV mode)
Using TV Guide (Digital TV mode)
MUTE
To watch the programme
select
POWER
CH
To view details of the programme
Select the programme
select
INFO
watch
● Press again
to return to
TV Guide.
REC
To the previous day
To return to TV
R
To the next day
G
To view a channel list of the
selected favourite list
To view a channel list of the
selected type
(Favourite list)
(Type list)
B
Y
EXIT
Favourites
All Digital Channels
select
All Digital Channels
Favourites1
view
Favourites2
Favourites3
Favourites4
To list channels
p. 29
Prog. Type
All Types
All Types
Movie
News
Entertainment
Sport
Children’s
Music
select
view
.
.
.
.
● When this TV is turned on for the first time, or the TV is switched off for more than a week, it may
take some time before the TV Guide is completely shown.
17
Watching External inputs
Connect the external equipment (VCRs, DVD equipment, PC, etc.) and you can watch through the
input.
● To connect the equipment p. 9, 48 and p. 49
The Remote Control is capable of operating some functions of selected external equipment.
For details, see the manual of the equipment or ask your local dealer.
SAP
TV
MENU
AV
SURROUND SD CARD
1
INFO
EXIT
● When viewing PC
2
OPTION
R
RETURN
G
Y
Display the input selection menu
AV
PC
PC
(
skip to 3 )
Select the input mode of the connected equipment
● You can also select the input using the AV button on the remote
control or the side panel of the TV (p. 11).
Press the button repeatedly until the desired input is selected.
● You can label or skip each input mode “Input Labels” (p. 33)
Skipped inputs will not be displayed when the AV button is pressed.
B
ASPECT P-NR OFF TIMER STILL
Example (AV2)
Input Selection
AV1
AV2
AV3
PC
HDMI1
HDMI2
HDMI3
TV
LAST
MUTE
POWER
3
CH
REC
watch
select
View
The selected mode is displayed on the screen.
Example (AV2)
16:9
To return to TV
TV
● If the external equipment has an aspect adjustment function, set to
“16:9”.
Example (PC)
PC
640X480 / 60Hz
16:9
● You can also listen to PC sound with the audio cable connected.
(To connect p. 48 and p. 49)
● You can setup some functions Advanced PC Settings (p. 24) in
the Picture Menu and PC Setup (p. 25) in the Setup Menu
● For HDMI-compatible PC (p. 51 and p. 52), possible to connect to
HDMI terminals (HDMI1 / HDMI2 / HDMI3) by using HDMI cable.
18
Operating the equipment with the TV remote control
POWER
Watching External inputs
The equipment connected to the TV can be directly operated with the below buttons of this TV
remote control.
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD
Stop
Stop the operation
Rewind / Skip / Search
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward
DVD: Skip to the next track or title
Press and hold to search forward
Basic
VCR: Rewind, view the picture rapidly in reverse
DVD: Skip to the previous track or title
Press and hold to search backward
Pause
Pause / Resume
DVD: Press and hold to play at slow speed
CH
Programme Up / Down
Select programme
REC
Record
Start recording
How to change the code for each equipment
Each type of Panasonic equipment has its own remote control code.
Please change the code for each equipment you want to operate.
If you operate the connected equipment in VIERA Link (p. 46), select the code “73”.
POWER
during the following operations
Press and hold
Enter the appropriate code
(see table below)
Press
Type of equipment
DVD Recorder / DVD Player
Player theatre / Blu-ray Disc theatre
VCR
The equipment using in VIERA Link
“VIERA Link Control” (p. 46)
Code
70 (default)
71
72
73
● Confirm if the remote control works correctly after changing the code.
● The codes may be reset to default values if batteries are replaced.
● Some operations may not be possible on some equipment models.
19
How to Use VIERA TOOLS
You can access some special features easily by using the VIERA TOOLS function.
POWER
SAP
TV
MENU
AV
1
Display icons of the feature
2
Select a feature
SURROUND SD CARD
PC
INFO
EXIT
OPTION
R
RETURN
G
Y
select
B
access
ASPECT P-NR OFF TIMER STILL
VIERA Link Control
1
LAST
MUTE
3
2
3
4
Follow the operation of each feature
1 VIERA Link Control
“VIERA Link Control” (p. 46)
CH
POWER
REC
When two or more compatible equipments are connected, a selection
screen will be displayed.
Please select the correct description and access.
To return to TV
2 Photo
“Photo mode” (p. 38)
3 Video
“Video mode” (p. 40)
4 Music
“Music mode” (p. 42)
EXIT
or
20
How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and other functions.
1
POWER
SAP
TV
MENU
AV
Display the menu
● Displays the functions that can be set
MENU
SURROUND SD CARD
PC
INFO
(varies according to the input signal)
EXIT
2
Select the menu
access
Main Menu
Picture
Sound
OPTION
RETURN
Y
3
ASPECT P-NR OFF TIMER STILL
select
Select the item
LAST
4
90
0
50
50
0
0
(example)
On
1/2
Normal
90
0
50
50
0
(example)
Normal
50
Sharpness
RETURN
Moved
Go to the next screen
Displays the next screen
Enter characters by free input menu
up
down
B
V
b
v
C
W
c
w
D
X
d
x
● To reset the sound settings only
“Reset to Defaults”
in the Sound Menu (p. 25)
“Shipping Condition”
in the Setup Menu (p. 34)
select
User input
Name
A
U
a
u
To reset the settings
● To reset the picture settings only
“Reset to Defaults”
in the Picture Menu (p. 24)
● To reset all settings
Digital TV Tuning Menu Access
To change menu
pages
store or access
(Required by some
functions)
0
On
Choose from among alternatives
Number and positions of alternatives
Colour Balance
change
Normal
Changed
Adjust using the slide bar
To return to the
previous screen
select
Normal
Picture Menu
Viewing Mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance
Channel Colour Set
Vivid Colour
REC
EXIT
Normal
Adjust or select
CH
To return to TV at
any time
1/2
Picture Menu
Viewing Mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance
Channel Colour Set
Vivid Colour
MUTE
POWER
(example)
Setup
B
How to Use VIERA TOOLS
How to Use Menu Functions
G
E F G
Y Z
e f g
y z (
RETURN
or
H I J K L M N O P Q R S T
0 1 2 3 4 5 6 7 8 9 ! : #
h i j k l m n o p q r s t
) + - . * _
● To delete a character
Advanced
R
set
R
Store
● To delete all characters
B
Every press changes the character by one. Leave it for a second to set the
character, or press OK or any numeric button within a second.
See the table below for the corresponding characters for each numeric button.
Numeric buttons
Characters
Numeric buttons
Characters
.1!:#+-*_()
mno6MNO
abc2ABC
pqrs7PQRS
def3DEF
tuv8TUV
ghi4GHI
wxyz9WXYZ
jkl5JKL
Space 0
21
Overview
Main Menu
Picture
Sound
Setup
Picture
Picture Menu
Viewing Mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance
Channel Colour Set
Vivid Colour
Picture Menu
Eco Mode
P-NR
3D-COMB
Black Level
Panel
Advanced PC Settings
Reset to Defaults
Sound
Sound Menu
Mode
Bass
Treble
Equalizer
Balance
Headphone Volume
Surround
Volume Correction
Speaker Distance to Wall
Sound Menu
Audio Preference
HDMI1 Input
Reset to Defaults
(p. 23 and p. 24)
1/2
Normal
90
0
50
50
0
Normal
0
On
Digital TV Tuning Menu
Favourites Edit
Channel List
Auto Tuning
Manual Tuning
Update Channel List
New Channel Message
Signal Condition
Access
Access
Access
Access
Access
On
Access
(p. 25)
Analogue TV Tuning Menu
Channel List
Access
Auto Tuning
Access
Manual Tuning
Access
(p. 25)
2/2
Off
Off
On
Normal
On
Access
Reset
Language
OSD Language
Access
(p. 25)
(p. 24 and p. 25)
1/2
Music
0
0
0
0
12
Access
Off
0
Over 30cm
Display Settings
Side Panel
Input Labels
Banner Display Timeout
Playing Time Display
High
Access
3 seconds
On
(p. 26)
VIERA Link Settings
VIERA Link
Power on Link
Power off Link
Standby Power Save
Intelligent Auto Standby
On
Off
On
Off
Off
(p. 26)
2/2
Auto
Digital
Reset
Setup
(p. 25 - 27)
Setup Menu
PC Setup
Off Timer
Child Lock
ANT in
Digital TV Tuning Menu
Analogue TV Tuning Menu
Language
Display Settings
VIERA Link Settings
Access
Off
Access
Access
Access
Access
Access
Access
Access
Setup Menu
System Menu
Other Settings
Access
Access
1/2
System Menu
Shipping Condition
System Update
Software Licence
System Information
Access
Access
Access
Access
(p. 26)
2/2
Other Settings
AV Colour System
Colour Matrix
Intelligent Frame Creation
24p Smooth Film
Auto Standby
Power Save
16:9 Overscan
H-Size
DVI Input Setting
Auto
SD
Off
Off
Off
Off
On
Normal
Normal
(p. 27)
● Depending on the received signals, available items are varied.
22
Menu list
Adjustments / Configurations (alternatives)
Viewing Mode
Basic picture mode (Dynamic / Normal / Cinema / True Cinema / Game)
In each Viewing Mode and input, Contrast, Brightness, Colour, Sharpness,
Tint, Colour Balance, Vivid Colour, Eco Mode, P-NR and 3D-COMB can
be adjusted and stored to suit your particular viewing requirement.
● Set for each input signal.
Dynamic
: Provides enhanced picture contrast and sharpness when
viewing in a bright room
Normal
: Recommended for viewing under normal ambient room
lighting conditions.
Cinema
: For watching movies in a darkened room with improving the
performance of contrast, black and colour reproduction
True Cinema : Precisely reproduces the original quality of the image
without any revision.
Game
: Fast response signal specifically to provide suitable images
for playing games
● Not valid on TV mode
● A continuous record of time spent using Game mode can
be displayed in the top right of the screen.
“Playing Time Display” (p. 26)
Contrast,
Brightness,
Colour,
Sharpness
Increases or decreases the levels of these options according to your
personal preference
Tint
● For NTSC signal, Component or HDMI input
Colour Balance
Allows you to set the overall colour tone of the picture
(Cool / Normal / Warm)
● Not valid when the viewing mode is set to “True Cinema”
Channel Colour
Set
Colour density varying between broadcast channels can be adjusted to
three levels for each reception channel
● Analogue TV mode only
● Select the channel you want to adjust and set this function.
Vivid Colour
Automatically adjusts colours to vivid ones (Off / On)
● Not valid on PC signal
Eco Mode
Automatically adjusts the screen brightness appropriately as the
surrounding light level lowers to reduce the power consumption (Off / On)
● Not available in shop mode (Dynamic picture mode)
P-NR
Picture Noise Reduction
Automatically reduces unwanted picture noise and flicker noise in the
contoured parts of a picture (Off / Min / Mid / Max)
● Not valid on PC signal
3D-COMB
Makes still or slow moving pictures look more vivid (Off / On)
● Occasionally, while viewing still or slow moving pictures, colour
patterning may be seen. Set to “On” to display sharper and more
accurate colours.
● For PAL or NTSC signal reception only
● Not valid on Component, PC, HDMI and Media Player
Black Level
Selects dark or light picture (Normal / With setup 7.5IRE)
● You can set this function for each input.
● Not valid on Digital TV mode
The picture hue can be adjusted to suit your taste.
How to Use Menu Functions
Item
Advanced
Picture
Menu
23
Menu
Item
Advanced
PC Settings
Picture
Panel
R-Gain,
G-Gain,
B-Gain
R-Cutoff,
G-Cutoff,
B-Cutoff
Gamma
Reset to
Defaults
Reset
to Defaults
Mode
Bass
Treble
Sound
Equalizer
Balance
Headphone Volume
Surround
Volume Correction
Speaker Distance
to Wall
Audio Preference
24
Adjustments / Configurations (alternatives)
Turns the screen off when you select “Off” (Off / On)
● The sound is active even if the screen turns off.
● Press any buttons to turn the screen on.
● This function is effective in reducing power consumption when listening
to a sound without watching the TV screen.
Adjusts each gain
Cuts off each area
Changes the gamma curve (S Curve / 1.8 / 2.0 / 2.2 / 2.4 / 2.6)
● Please note the numerical values are reference for the adjustment.
Press the OK button to reset the Advanced PC Settings to the default.
Press the OK button to reset the present Picture Viewing Mode of the
selected input to the default settings.
Selects basic sound mode (Music / Speech / User)
● The selected mode affects all input signals.
Music : Improves sound quality for watching music videos, etc.
Speech : Improves sound quality for watching news, drama, etc.
● In Music and Speech modes, you can adjust “Bass” and “Treble”
settings, and those settings will be stored for each mode.
User : Adjusts the sounds manually by using the equalizer to suit your
favourite sound quality.
● For the User mode, “Equalizer” will appear on the Sound Menu
instead of “Bass” and “Treble”. Select the “Equalizer” and adjust
the frequency. “Equalizer” (below)
Increases or decreases level to enhance or minimise lower, deeper sound output
Increases or decreases level to enhance or minimise sharper, higher sound output
Adjusts the frequency level to suit your favourite sound quality
● This function is available when “Mode” is set to “User”.
● Select the frequency and change the frequency level by using the cursor
button.
● If you want to enhance the bass sound, raise the level of the lower
frequency. If you want to enhance the treble sound, raise the level of the
higher frequency.
● To reset the levels of each frequency to the default settings, select
the “Reset to Defaults” by using cursor button, and then press the OK
button.
Adjusts the volume level of right and left speakers
Adjusts the volume of the headphones
Surround sound settings (Off / V-Audio / V-Audio Surround)
V-Audio
: Provides a dynamic enhancer to simulate improved
spatial effects
V-Audio Surround : Provides a dynamic enhancer of width and depth to
simulate improved spatial effects
● Switching is also possible by the Surround button on the remote control (p. 10).
Adjusts the volume of individual channel or input mode
Adjusts the low frequency sound (Over 30cm / Up to 30cm)
● If the back space between the TV and wall is over 30 cm, “Over 30cm”
is recommended.
● If the back space between the TV and wall is within 30 cm, “Up to
30cm” is recommended.
Selects the initial setting for audio tracks (Auto / MPEG)
Auto : Automatically selects the audio tracks if programme has more
than two tracks.
The priority is given in the following order - Dolby Digital, MPEG.
MPEG : The priority is given to MPEG as long as the programme contains
MPEG audio.
● Dolby Digital is the method of coding digital signals developed by Dolby
Laboratories. Apart from stereo (2ch) audio, these signals can be multichannel audio.
● MPEG is an audio compression method that compresses audio to the
smaller size without any considerable loss of audio quality.
● Digital TV mode only
Adjustments / Configurations (alternatives)
HDMI1 / 2 / 3
Input
Select to fit the input signal (Digital / Analogue) (p. 51).
Digital
: HDMI cable connection
Analogue : HDMI-DVI adaptor cable connection
● HDMI input mode only
Reset to Defaults
Press the OK button to reset settings of the present Mode, Balance,
Headphone Volume and Surround in the Sound Menu to the default.
Switches to a wide view
Input
Resolution
● VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
● Options change depending on signals
Clock
Set to the minimum level if noise occurs.
Adjusts horizontal position
Adjusts vertical position
V-pos
Eliminates flicker and distortion
Clock Phase
● Adjust after Clock adjustment ● Set to the minimum level if noise occurs
Sync
PC sync signal type (H & V / On Green)
H & V : by the horizontal and vertical signals from your PC
On Green : Sync on Green sync from your PC
Reset to
Defaults
Press the OK button to reset the PC Setup settings to the default.
Off Timer
Sets the time the TV automatically goes to Standby mode
(Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
Child Lock
Locks a channel / AV input to prevent access to it (p. 32)
ANT in
Select Antenna input type (Cable / Antenna)
● All tuning data will be erased.
Tuning Menu
Favourites Edit Creates list of favourite channels (Digital TV mode) (p. 29)
Channel List
Skips the unwanted channels or edits channels (p. 29 and p. 31)
Auto Tuning
Sets all Digital TV or Analogue TV channels automatically (p. 30 and p. 31)
Manual Tuning Sets the TV channels manually (p. 30 and p. 31)
Update
Channel List
Updates the channel list while keeping your settings (Digital TV mode)
(p. 30)
New Channel Selects whether to give a notification message when a new channel is
Message
found (Digital TV mode) (Off / On) (p. 30)
Signal
Condition
Language
Setup
PC Setup
H-pos
How to Use Menu Functions
Item
Advanced
Sound
Menu
Checks the Digital TV signal condition (p. 30)
OSD Language Changes language for on screen displays (English / Português / Español)
25
Menu
Item
Display Settings
Side Panel
Adjustments / Configurations (alternatives)
Increases the brightness of the side panel (Off / Low / Mid / High)
● The recommended setting is “High” to prevent panel “image retention”.
Input Labels Labels or skips each input terminal (p. 33)
Banner Display Sets how long the information banner stays on screen (p. 15)
Timeout
(0 (No display) / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 seconds)
Set to “On” to display a continuous record of time spent using Game mode
Playing Time every 30 mins (Off / On)
Display
● This function is available when “Game” is selected in “Viewing Mode”
(p. 23).
VIERA Link
Sets to use VIERA Link functions (Off / On)
● VIERA Link functions become available when “VIERA Link” is set to “On”
(p. 44).
VIERA Link Settings
System Menu
Setup
Power on Link Sets to use Power on Link functions (Off / On) (p. 45)
26
Power off Link Sets to use Power off Link functions (Off / On) (p. 45)
Standby
Power Save
Controls the power consumption in Standby mode of the connected
equipment to reduce the power consumption (Off / On) (p. 45)
● This function is available when “VIERA Link” is set to “On” and “Power
off Link” is set to “On”.
Intelligent
Auto
Standby
Makes non-watched or non-used connected equipment go into Standby
mode to reduce the power consumption
(Off / On (With reminder) / On (No reminder)) (p. 45)
● This function is available when “VIERA Link” is set to “On”.
Shipping
Condition
Resets all settings to the original condition (p. 34)
System
Update
Downloads new software to TV (p. 35)
Software
Licence
Displays the software licence information
System
Information
Displays the system information of this TV
AV Colour
System
Selects optimum colour system based on video signals in AV mode
(Auto / PAL-M / PAL-N / NTSC)
Colour
Matrix
Available only with 480p or 576p input on video signals in a natural colour
from digital equipment connected to AV1 component or HDMI1 / HDMI2 /
HDMI3 terminals. Select SD or HD to adjust suitable colour parameters for
SD (Standard definition) or HD (High definition)
● SD: Input signal is a normal TV system
● HD: Input signal is a high definition system
Intelligent
Frame
Creation
Automatically compensates the picture frame rate and removes juddering
movements to make the images smooth and clear (Off / On)
● Set to “Off” if noise is generated on the screen.
● This function is not available for selection (default to “Off”) when “Viewing
Mode” is set to “Game” or in the mode of PC input or photo.
24p Smooth
Film
Automatically compensates the picture frame rate to make the 24p source
movie images smooth (Off / On)
● This is available only for 24p signal input and displayed instead of
“Intelligent Frame Creation”.
● This function is not available for selection (default to “Off”) when “Viewing
Mode” is set to “Game” or in the mode of PC input or photo.
Auto
Standby
Sets the time the TV automatically goes to Standby mode when no operation
is performed for the selected times (Off / 2 / 4 hours)
● Automatic input switching with the connected equipment affects this
function and time-count will be reset.
● The notification message will appear 3 minutes before going to Standby
mode.
Power Save
Reduces brightness of picture to economise on power consumption
(Off / On)
16:9
Overscan
Selects the screen area for displaying the image (Off / On)
On: Enlarges the image to hide the edge of the image
Off: Displays the image in the original size
● Set to “On” if noise is generated on the edges of the screen.
● This function is available when aspect is set to “16:9”.
● This function can be memorized separately for SD (Standard definition)
and HD (High definition) signals.
H-Size
Switches over horizontal scanning size (Normal / Extended)
DVI Input
Setting
Changes the black level in the image for HDMI input mode with DVI input
signal manually (Normal / Full)
● When the DVI input signal from the external equipment, especially from
PC, is displayed, the black level may not be suitable. In this case, select
“Full”.
● The black level for HDMI input signal will be adjusted automatically.
● A different menu will be displayed in the mode of Media Player (p. 36 - 42).
● Only available items can be selected.
How to Use Menu Functions
Adjustments / Configurations (alternatives)
Advanced
Item
Other Settings
Setup
Menu
27
Tuning and Editing Channels
You can make Auto Tuning, listing your favourite channels, skipping unwanted channels, etc.
1
Select Digital TV or Analogue TV
● The selected mode is displayed on the
TV
screen (p. 14).
POWER
SAP
TV
MENU
AV
SURROUND SD CARD
PC
INFO
EXIT
RETURN
OPTION
R
G
Y
2
3
Select “Setup”
access
Main Menu
Picture
B
Sound
ASPECT P-NR OFF TIMER STILL
select
Setup
4
Select “Digital TV Tuning Menu” or “Analogue TV
Tuning Menu”
Digital TV Tuning Menu
LAST
MUTE
POWER
Display the menu
MENU
Setup Menu
Off Timer
Child Lock
ANT in
Digital TV Tuning Menu
Language
Display Settings
VIERA Link Settings
System Menu
Other Settings
CH
REC
Off
Access
Analogue TV Tuning Menu
Setup Menu
Off Timer
Off
Child Lock
ANT in
Analogue TV Tuning Menu Access
Language
Display Settings
VIERA Link Settings
System Menu
Other Settings
access
select
To return to TV
EXIT
5
For Auto Tuning, using
the buttons on the side
panel of the TV (p. 11)
Select a function
Digital TV Tuning Menu
Digital TV Tuning Menu
Favourites Edit
Channel List
Auto Tuning
Manual Tuning
Update Channel List
New Channel Message
Signal Condition
Press repeatedly until
“Auto Tuning” appears
F
Access “Auto Tuning”
● For details
TV
Access
Access
Access
Access
Access
On
Access
Analogue TV Tuning Menu
Analogue TV Tuning Menu
Access
Channel List
Auto Tuning
Access
Access
Manual Tuning
● For details
p. 29 and p. 30
Start “Auto Tuning”
access
TV
select
6
● To return to TV
F
28
Set (see p. 29 - 31)
p. 31
Digital TV Tuning Menu
Favourites Edit List favourite channels
Create your favourite channel lists (Favourites) from various broadcasters (up to 4: Favourites1 to 4).
The Favourites lists are available from the Information banner (p. 15) and the TV Guide (p. 17).
Select a channel to list
Add it to the Favourites list
Digital TV Favourites Editor
Digital TV Favourites Editor
All Digital Channels
TEN Digital
ABC TV Sydney
SBS DIGITAL1
FTV guide
7 Digital
NINE DIGITAL
7 HD Digital
7 Guide
1
2
3
4
5
6
7
8
select
another Favourites
● To display
G
TEN Digital
ABC TV Sydney
SBS DIGITAL1
FTV guide
7 Digital
NINE DIGITAL
7 HD Digital
7 Guide
● To add all channels
Y
Favourites1
1 TEN Digital
A channel is added
to the list
To edit List
Select the field of Favourites to edit and:
● To name the Favourites
R
RETURN
select
User input
Name
B
V
b
v
C
W
c
w
D
X
d
x
E F G
Y Z
e f g
y z (
H I J K L M N O P Q R S T
0 1 2 3 4 5 6 7 8 9 ! : #
h i j k l m n o p q r s t
) + - . * _
(maximum: ten characters)
● To move the channel
G
Select the new position
● To delete the channel
Store
set
Set characters
● You can set characters by using numeric
buttons (p. 21).
G
or
Confirm
● To delete all channels
Store
Y
Advanced
A
U
a
u
RETURN
● Hidden channels (see below) can be selected but not viewed.
Channel List
Tuning and Editing Channels
Favourites1
All Digital Channels
1
2
3
4
5
6
7
8
Skip unwanted channels
Select a channel and reveal / hide
Digital TV Channel List
1 CBBC Channel
2 Cartoon Nwk
3 BBCi
4 BBC Radio Wales
5 BBC Radio Cymru
6 BBC ONE Wales
7 BBC THREE
reveal / hide
: reveal
: hide (skip)
select
Y
You can hide unwanted
channels. The hidden
channels cannot be displayed
except in this function.
Use this function to skip
unwanted channels.
● To reveal all channels
● To retune each channel (Manual Tuning)
R
(p. 30)
29
Tuning and Editing Channels
Digital TV Tuning Menu
Auto Tuning Set all Digital TV channels automatically
Start Auto Tuning
Settings are made automatically
Digital TV Auto Tuning
Digital TV Auto Tuning
Scan
Analogue
Scan
All Digital TV tuning data will be erased
Start Auto Tuning
21
CH 2
This will take about 3 minutes.
Channel Name
CH
TV Finland
32
Boxer Navigator
32
SVT HD
32
EXIT
RETURN
69
68
Type
Digital TV
Digital TV
Digital TV
Quality
10
10
10
Automatically retune
all Digital TV channels
received in the area.
Digital TV: 3
Searching
● All the previous tuning settings are erased.
● When the operation is completed, the channel at channel position “1” will be displayed.
● Search begins in the order from the lower channels to the higher channels.
● If tuning has not been done completely “Manual Tuning” (see below)
Manual Tuning Set Digital TV channel manually
Digital TV Manual Tuning
Frequency
S
ignal QuaScan
lity
Analogue
Signal Strength
No.
Channel Name
[CH21]
474,00
0
21
0
Type
MHz
1068
10
New
Digital TV: 0
Stopped
Normally use “Auto Tuning” or “Update Channel List” to
update Digital TV channels on your channel list.
If tuning has not been done completely or for adjusting the
direction of the aerial, use this function.
select frequency
select offset
start scan
● All channels found will be added to the Digital TV
Channel List.
Update Channel List Update channels automatically
Digital TV Update Channel List
Scan
69
CH 2
This will take about 3 minutes.
CH
Channel Name
Type
Quality
You can add new channels, delete duplicated channels,
update channel name and position automatically to
Channel List.
● Channel List is updated while keeping your settings in
Favourites Edit, Channel List, Child Lock, etc.
Digital TV: 0
Searching
New Channel Message Display a notification message
Selects whether to give a message when new Digital TV
channel is found. (Off / On)
● Selecting OK will perform “Update Channel List”.
New channels found!
Press OK to update channel list.
Press EXIT to ignore.
Signal Condition Check Digital TV signal
● To change the channel
Digital TV Signal Condition
Channel Name
1 TEN Digital
0
Signal Quality
0
Signal Strength
Network Name
RiksTV
Parameter
[CH32] 562.00 MHz
30
10
10
Selects a channel and checks the Digital TV signal
condition.
A good Signal Strength is not an indication of suitable
signal for Digital TV reception. Please use the Signal
Quality indicator as follows:
Signal Quality:
● Green bar Good
● Yellow bar Poor
● Red bar Bad (Check the aerial)
Analogue TV Tuning Menu
Skip unwanted channels / Edit channels
Select a channel and reveal / hide
You can hide unwanted
channels. The hidden
channels cannot be
displayed except in this
function.
Y
Use this function to skip
● To reveal all channels
unwanted channels.
R
(see below)
● To retune each channel (Manual Tuning)
reveal / hide
: reveal
: hide (skip)
select
Analogue TV Channel List
1 BBC1
2 *****
3 *****
4 *****
5 *****
6 *****
7 *****
To edit channels
You can also edit each channel in Channel List.
or
Channel position
Channel name
1 BBC
23:35
All Analogue Channels
CH02
Select a channel to edit and:
● To rename the channel name
B
A
U
a
u
B
V
b
v
C
W
c
w
D
X
d
x
E F G
Y Z
e f g
y z (
RETURN
select
Edit channel name
Name
H I J K L M N O P Q R S T
0 1 2 3 4 5 6 7 8 9 ! : #
h i j k l m n o p q r s t
) + - . * _
set
Store
Set characters
● You can set characters by using numeric
buttons (p. 21).
(maximum: five characters)
Tuning and Editing Channels
Channel List
Auto Tuning Set all Analogue TV channels automatically
Settings are made automatically
Analogue TV Auto Tuning
Analogue TV Auto Tuning
Scan
This will take about 3 minutes.
CH
Channel Name
62
63
64
65
All analogue TV tuning data will be erased
Start Auto Tuning
EXIT
CH2
69
Automatically retune all
Analogue TV channels
received in the area.
Analogue TV: 4
RETURN
Searching
● All the previous tuning settings are erased.
● When the operation is completed, the channel at channel position “1” will be displayed.
● Search begins in the order from the lower channels to the higher channels.
● If tuning has not been done completely “Manual Tuning” (see below)
Advanced
Start Auto Tuning
Manual Tuning Set Analogue TV channel manually
Fine Tuning
Analogue TV Manual Tuning
1 BBC1
Fine Tuning
Manual Tuning
Colour System
2
Auto
CH57
CH33
69
CH33
CH33
Select a channel position Select a channel
● Use to make small adjustments
to the tuning of an individual
channel (affected by weather
conditions, etc.)
Search and store Manual Tuning
Set Analogue TV channel
manually after Auto Tuning.
search ● Set Colour System, and then
store
perform this function. Set
Colour System “Auto” normally.
● If a VCR is connected only with
the RF cable, select channel
position “0”.
31
Child Lock
You can lock specific channels / AV input terminals and control who watches them.
When the locked channel / input is selected, a message appears; by entering the PIN number, you can
watch it.
1
POWER
SAP
TV
AV
Display the menu
MENU
SURROUND SD CARD
MENU
PC
INFO
EXIT
2
Select “Setup”
access
Main Menu
Picture
Sound
RETURN
OPTION
select
Setup
R
G
Y
B
ASPECT P-NR OFF TIMER STILL
3
Select “Child Lock”
Setup Menu
Off Timer
Child Lock
ANT in
Digital TV Tuning Menu
Language
Display Settings
VIERA Link Settings
System Menu
Other Settings
LAST
MUTE
To return to TV
4
EXIT
access
Off
Access
select
Set (see below)
Child Lock Control channel audience
Enter the PIN number (4 digits)
● Enter the PIN number twice at
first setting.
● Make a note of the PIN number
Child Lock-PIN Entry
Please enter PIN for access
PIN
* * * *
in case you forget it.
Select “Child Lock List”
access
Child Lock
Change PIN
Child Lock List
select
Access
Select the channel / input to be locked
lock
Child Lock List - TV and AV
1
2
3
4
5
Name
BBC1
*****
BBC THREE
E4
BBC 1 Wales
AV1
AV2
Input
Digital TV
Digital TV
Digital TV
Digital TV
Digital TV
External
External
Type
Digital TV
Digital TV
Digital TV
Digital TV
Digital TV
AV
AV
Lock
Lock
Lock
Lock
Lock
Lock
Lock
Appears when the channel / input is locked
select
● To cancel
Select the locked channel /
input
● To lock all
● To cancel all locks
● To jump to the top of the next
G
Y
input
R
To change the PIN number
Select “Change PIN” in “Child Lock” and enter a new PIN number twice.
● Performing “Shipping Condition” (p. 34) erases the PIN number and all settings.
32
Input Labels
For easier identification and selection of the input mode, you can label each input terminals or skip
terminal that is not connected to any equipment.
● To select the input mode p. 18
POWER
1
SAP
TV
MENU
AV
PC
INFO
Display the menu
MENU
SURROUND SD CARD
EXIT
2
Select “Setup”
access
Main Menu
OPTION
Picture
RETURN
Sound
R
G
Y
B
select
Setup
ASPECT P-NR OFF TIMER STILL
Select “Display Settings”
LAST
MUTE
POWER
4
CH
select
Access
Select “Input Labels”
Display Settings
Side Panel
Input Labels
Banner Display Timeout
REC
5
access
Off
Child Lock
Input Labels
Setup Menu
Off Timer
Child Lock
ANT in
Digital TV Tuning Menu
Language
Display Settings
VIERA Link Settings
System Menu
Other Settings
access
High
Access
3 seconds
select
Advanced
3
Select an input terminal and set
Input Labels
AV1
AV2
AV3
PC
HDMI1
HDMI2
HDMI3
Digital TV
Analogue TV
To return to TV
EXIT
AV1
AV2
AV3
PC
HDMI1
HDMI2
HDMI3
Digital TV
Analogue TV
change
select
The labels you set will be displayed in “Input Selection” menu (p. 18)
or banner.
● If “Skip” is selected, you cannot select the mode.
User input
You can name each input terminals freely.
select
access
Select “User input”
select
User input
Name
A
U
a
u
B
V
b
v
C
W
c
w
D
X
d
x
E F G
Y Z
e f g
y z (
H I J K L M N O P Q R S T
0 1 2 3 4 5 6 7 8 9 ! : #
h i j k l m n o p q r s t
) + - . * _
(maximum: ten characters)
RETURN
set
Set characters
● You can set
characters by using
numeric buttons
(p. 21).
Store
33
Shipping Condition (Reset settings)
Resets the TV to its original condition, i.e. no channels tuned in.
All settings are reset (channels, picture, sound settings, etc.).
POWER
SAP
TV
MENU
AV
1
SURROUND SD CARD
PC
INFO
EXIT
OPTION
2
RETURN
R
G
Y
Display the menu
MENU
Select “Setup”
access
Main Menu
Picture
B
Sound
ASPECT P-NR OFF TIMER STILL
select
Setup
3
Setup Menu
Off Timer
Child Lock
ANT in
Digital TV Tuning Menu
Language
Display Settings
VIERA Link Settings
System Menu
Other Settings
LAST
MUTE
POWER
Select “System Menu”
CH
4
REC
5
EXIT
select
Access
Select “Shipping Condition”
System Menu
Shipping Condition
System Update
Software Licence
System Information
To return to TV
access
Off
access
Access
select
Set (see below)
Shipping Condition Reset settings
Check the message and reset
Follow the on screen instructions
Shipping Condition
All tuning data will be erased
Are you sure?
Are you sure?
(confirm)
EXIT
(confirm)
Confirm
RETURN
Reset to Factory Shipping Condition
Completed.
Please switch off TV.
● “Auto Tuning” will automatically start
(start Shipping
Condition)
To retune TV channels only, e.g. after moving house
when Mains power On / Off switch is
next turned On (p. 12).
“Auto Tuning” in “Tuning and Editing Channels” (p. 30 and p. 31)
34
Updating the TV Software
From time to time, a new version of software may become available for download to enhance the
performance or operations of the TV. If there is an update available, a notification banner is displayed
when the channel has the update information.
EXIT
● To download
● If you choose not to download
You can update any new software automatically or manually.
1
POWER
SAP
TV
MENU
Display the menu
MENU
AV
SURROUND SD CARD
2
Select “Setup”
access
Main Menu
Picture
Sound
RETURN
OPTION
select
Setup
R
G
Y
B
3
ASPECT P-NR OFF TIMER STILL
Setup Menu
Off Timer
Child Lock
ANT in
Digital TV Tuning Menu
Language
Display Settings
VIERA Link Settings
System Menu
Other Settings
LAST
MUTE
4
POWER
Select “System Menu”
To return to TV
EXIT
5
select
Access
Select “System Update”
System Menu
Shipping Condition
System Update
Software Licence
System Information
CH
access
Off
access
Access
select
Set (see below)
System Update Update TV’s software system
To update automatically
System Update
Auto Update Search in Standby
System Update Search Now
To update immediately
Advanced
EXIT
Shipping Condition (Reset settings)
Updating the TV Software
PC
INFO
On
Start
Set “Auto Update Search in
change Standby” to “On”
select
● Automatically performs a search in standby and
downloads an update, if any software updates
are available.
● The automatic updating is performed at 3:00 AM
and 5:00 AM every morning under the following
conditions:
• Standby (TV turned Off with the remote control)
Select “System
Update Search
select
Now”
Searches for an update
(for several mins.) and
displays a corresponding
message if any
start
Download
If System Update is performed, the software will be updated (it may change TV functions).
If you do not wish to do so, set “Auto Update Search in Standby” to “Off”.
● Download may take about 60 mins.
● During software download and update, DO NOT switch Off the TV or press any buttons. The TV
will automatically be activated after downloading is completed.
● A clicking sound will occur at 3:00 AM and 5:00 AM when “Auto Update Search in Standby” is set
to “On”. This sound is normal.
● During downloading, the TV will display a blank screen for 40 to 50 seconds. Do not interrupt the
TV during this procedure.
35
Using Media Player
Media Player allows you to enjoy photo, video or music recorded on an SD Card and a USB Flash
Memory.
VIERA IMAGE VIEWER is the function of the easy viewing for photos or videos recorded on an
SD Card on the TV screen by simply inserting into the SD Card slot.
Photo mode : Still pictures recorded by digital cameras will be displayed.
Video mode : Moving pictures recorded by digital video cameras will be played back.
Music mode : Digital music data will be played back.
When these functions are used, the audio signal is output from audio output terminals, but video
signals are not output.
● “Date” shows the date on which the recording was made by the recording equipment. The file
without record of the date is shown “**/**/****”.
Data format for SD Card / USB Flash Memory browsing
● Photo : Still images recorded with digital still cameras compatible with JPEG files of DCF∗ and
EXIF standards
Data format - Baseline JPEG (Sub-sampling 4:4:4, 4:2:2 or 4:2:0)
Image resolution - 8 × 8 to 30,719 × 17,279 pixels
● Video : SD-Video Standard Ver. 1.2 [MPEG-2 (PS format)] and AVCHD Standard compatible files
with an audio format that is either MPEG-1/Layer-2 format or Dolby Digital format
(A modified data with a PC may not be displayed correctly.)
● Music : Data format - MP3 (.mp3)
● SD Card format : SDXC Card - exFAT
SDHC Card / SD Card - FAT16 or FAT32
● Compliant card type (maximum capacity): SDXC Card (64 GB), SDHC Card (32 GB), SD Card (2 GB),
miniSD Card (2 GB) (requiring miniSD adapter)
● If miniSD Card is used, insert / remove it together with the adapter.
● Check the latest information on the card type at the following website. (English only)
http://panasonic.jp/support/global/cs/tv/
● USB Flash Memory format : FAT16, FAT32 or exFAT
∗DCF (Design rule for camera file system): Unified standard established by Japan Electronics and Information Technology Industries Association (JEITA).
● Format the device with the recording equipment.
● The picture may not appear correctly on this TV depending on the recording equipment used.
● Display may take some time when there are many files and folders.
● This function cannot display Motion JPEG and still image not JPEG formatted (i.e. TIFF, BMP).
● A data modified with a PC may not be displayed.
● Images imported from a PC must be compatible with EXIF (Exchangeable Image File) 2.0, 2.1, and 2.2.
● Partly degraded files might be displayed at a reduced resolution.
● The folder and file names may be different depending on the digital camera or digital video camera used.
● Do not use two-byte characters or other special codes.
● The device may become unusable with this TV if the file or folder names are changed.
To insert or remove the SD Card / USB Flash Memory
USB Flash Memory
● Insert or remove straightly and completely.
SD Card
● To insert SD Card
● To remove SD Card
Gently insert the
Label
SD Card label
surface facing front. surface
Push until a
click is heard
Push the centre of
the card
Cutout
● For more information of the SD Card
36
p. 50
Starting Media Player
1
POWER
2
SAP
TV
MENU
AV
SURROUND SD CARD
PC
INFO
Insert the SD Card or USB Flash Memory
When the SD Card is inserted, switching to Media Player (Photo
mode) will be done automatically. p. 38
● It is assumed the SD Card contains photos. If not, press the blue
button to activate the “Contents Select” screen and select the
other mode.
“To switch to the other mode” (see below)
Switch to Media Player
SD CARD
EXIT
3
Select the icon you want to access to
select
RETURN
R
G
Y
access
B
Drive Select
ASPECT P-NR OFF TIMER STILL
ASPECT
● If two or more devices are not
EXIT
Select
Access
connected, this step will be
skipped.
RETURN
SD Card
selected device name
4
LAST
Using Media Player
Media Player
OPTION
Select the content
Media Player
MUTE
select
access
Contents Select
EXIT
CH
Select
Access
RETURN
Photo
Video
Advanced
POWER
Music
SD Card
● Photo
● Video
● Music
REC
“Photo mode” (p. 38)
“Video mode” (p. 40)
“Music mode” (p. 42)
To switch to the other mode
While the thumbnail is displayed,
display the contents selection.
Select the contents
Contents Select
To return to TV
EXIT
or
EXIT
B
select
access
Select
SD CARD
Access
RETURN
Photo
Video
Music
SD Card
To return to the
previous screen
RETURN
Change the device
You can change to the other device directly in the same mode if two devices are connected.
Select “Drive Select”
Select the icon you want to access to
Display
access
the menu
Main Menu
Media Player
MENU
select
access
Picture
Sound
Photo Setup
Video Setup
Music Setup
Drive Select
select
Drive Select
EXIT
Select
Access
RETURN
SD Card
selected device name
37
Using Media Player
Photo mode
Photo mode will read all “.jpg” extension files in the SD Card or USB Flash Memory.
Insert the SD Card or access to “Photo” mode (p. 37)
Error display (images that could not be loaded, etc.)
Media Player
Photo
All photos
Thumbnail images of all photos in the SD Card or USB Flash
Memory are displayed.
● To change the background music
“Photo Setup” (p. 39)
● To display the information of the highlighted photo
INFO
View
EXIT
RETURN
Select
Slideshow
In case of all photos
SD Card
Info
Contents Select
View Select
(Thumbnail - All photos)
1/48
File name
p1010001.JPG
Date
23/10/2009
Pixel
1600X1200
In case of the
sorted group view
(see below)
group number /
1/12
file number /
total group
Folder name
total file
23/10/2009 number
Number of files
number
3 folder name,
date or month
Single view - Display one photo at a time.
Select the photo that you want to view
● To display / hide the operation guide
select
INFO
single
view
● To operate Single view
Single view
To the previous photo
Rotate 90˚ (anti-clockwise)
To the next photo
Rotate 90˚ (clockwise)
Rotate
EXIT
Select
RETURN
Slideshow
Single view
(Single view)
Operation guide
● To return to thumbnail
RETURN
Slideshow - Slideshow ends with the same thumbnail from which it started.
Select the photo that you want
Start
● To display / hide the operation guide
INFO
to start the slideshow from
Slideshow
select
R
● To pause (returns to Single view)
● To return to thumbnail
RETURN
To sort by folder, date recorded or month recorded
Display the
view selection
G
Select the sort type
Folder view
Sort by Date
Sort by Month
access
Displays thumbnails of photos grouped by folder
Displays thumbnails of photos grouped by date
Displays thumbnails of photos grouped by month
● Files that are not stored in a folder are grouped in a folder named “/”.
● Photos without a recorded date are displayed as “Unknown”.
select
● To return to the thumbnail (All photos)
G
access
select “All photos”
38
Photo Setup Setup for Photo mode
Display
the menu
Main Menu
Picture
access
Sound
MENU
Photo Setup
Video Setup
Music Setup
select
Photo Setup Menu
Back Ground Music
Frame
Colour Effect
Transition Effect
Screen Mode
Interval
Repeat
Type1
Off
Off
Fade
Normal
Normal
On
change
select
Item
Back
Ground
Music
Frame
Colour
Effect
Photo
Setup
Adjustments / Configurations (alternatives)
Selects the background music played during Photo mode
(Off / Type1 / Type2 / Type3 / Auto / User)
Type1 / 2 / 3 : Pre-installed music tracks
Auto : Music data stored in the root folder of the current device will be
played back randomly.
● If there is no available music data, no sound will be produced.
User : Plays music set by you
● For setting p. 42
Selects the display frame for the slideshow (Off / Multi / Collage)
Multi : Display is divided into 9 sections in a tiled design
Collage : Photos are displayed in random positions and random scale
Selects the colour effect of photos (Off / Sepia / Gray scale)
Selects the transition effect used when switching between photos during
the slideshow
(Off / Fade / Slide / Dissolve / Motion / Random)
Fade
: The next photo fades in gradually.
Transition Slide
: The next photo slides and appears from the left side.
Effect
Dissolve : The photo is replaced by an indefinite block unit.
Motion : The photo is replaced with enlarged, reduced, moved up or
moved down.
Random : Each transition is selected at random.
● This function is only available when “Frame” is set to “Off”.
Selects whether to display photos in normal or enlarged size during Single
Screen
view and Slideshow (Normal / Zoom)
Mode
● Depending on the photo size, the photo may not be enlarged.
Interval Selects slideshow interval (Short / Normal / Long)
Repeat
Slideshow repeat (Off / On)
Advanced
Menu
Using Media Player
Drive Select
39
Using Media Player
Video mode
Video mode supports AVCHD and MPEG2 file formats.
Access to “Video” mode (p. 37)
Film icon will be displayed if the file does not support thumbnail view.
Media Player
Video
Title view
Trip1
Trip2
Trip3
Trip4
Trip5
Room
Nature1
Nature2
Nature3
Nature4
Nature5
Nature6
2009_4
2009_7
Thumbnails of video titles in the SD Card or USB
Flash Memory are displayed.
When a title is highlighted, preview starts (if the title
supports previewing).
● To turn preview off
“Video Setup” (p. 41)
● To display the information of the highlighted title
INFO
2009_9
Access
Select
EXIT
RETURN
SD Card
Info
Play
1/15
Title
Contents Select
(Thumbnail - Title view)
Trip1
Date & Time
19/02/2009 11:21
Number of scenes
8
Duration
00h15m39s
Trip1
file format
title number /
total title number
Playback from Title view
Playback of the selected title starts.
Select the title
Start playback
select
R
Playback from the selected scene in the title
Playback starts from the selected scene, and runs to the end of the title.
Select the title
Select the scene to start playback
select
Media Player
Video
Title view > Trip1
select
playback
access
Trip1_1
Trip1_2
Trip1_3
Trip1_4
Trip1_5
Trip1_6
When a scene is highlighted,
preview starts (if the scene
supports previewing).
● To turn preview off
“Video Setup” (p. 41)
Trip1_7
Trip1_8
Play
EXIT
RETURN
Select
SD Card
Info
Contents Select
(Thumbnail - Scene view)
● To repeat playback
“Video Setup” (p. 41)
● To display the information of the highlighted scene
INFO
1/8
Scene
Trip1
40
Trip1_1
Date & Time
19/02/2009 11:21
Duration
00h04m12s
file format
scene number / total scene number
Operations during playback
● To display / hide the operation
guide and information banner
● To change the aspect ratio
(only for the 4:3 video content)
ASPECT
INFO
EXIT
● To operate the playback
RETURN
Title
Date & Time
Trip1
01/12/2008
Rewind
Pause / Playback
Playback
Fast forward
Stop
10:12
00:00.05 / 00:00.30
Operation guide
(Playback)
Information banner
RETURN
● To return to thumbnail
● To the previous scene
● To the next scene
R
G
Sound Settings
You can enjoy multi-channel sound by connecting an amplifier to the DIGITAL AUDIO OUT terminal.
To confirm or change the current sound status (during playback)
Option Menu
Audio Selection
Change the sound (if the video has multiple audio signals)
Stereo
● It may take several seconds for the changes
to take effect
change
(Current sound status)
Audio output settings
Display
the menu
MENU
Select “Sound”
Select “SPDIF Selection” and set
Sound Menu
Mode
Bass
Treble
Balance
Headphone Volume
Surround
Volume Correction
Speaker Distance to Wall
SPDIF Selection
Main Menu
access
Picture
Sound
select
Photo Setup
Video Setup
Music Setup
Drive Select
Menu
Sound
Item
1/2
Music
0
0
0
11
set
select
Off
0
Over 30cm
Auto
Adjustments / Configurations (alternatives)
SPDIF : Standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO
SPDIF
OUT terminal (Auto / PCM)
Selection
Auto: Dolby Digital is output as Dolby Digital Bitstream. MPEG is output as PCM.
PCM: Digital output signal is fixed to PCM.
Video Setup Setup for Video mode
Display
the menu
MENU
Select
“Video Setup”
Main Menu
Picture
Select
“Other Settings”
Video Setup Menu
Display Settings
Other Settings
Access
Sound
Photo Setup
Select the items and set
Other Settings
Intelligent Frame Creation
16:9 Overscan
Video Preview
Repeat
Music Setup
select
Drive Select
Video
Setup
Off
On
On
Off
access
Video Setup
Menu
Advanced
OPTION
Using Media Player
Display the Option menu
Item
set
select
Adjustments / Configurations (alternatives)
Sets whether to start previewing the title or scene in a thumbnail
Video
screen (Off / On)
Other
Preview ● Images may not be displayed for a short time in the thumbnail
Settings
screen. To resolve this problem, set preview to “Off”.
Repeat
Playback repeat within the title (Off / On)
● The structure of titles and scenes may vary depending on the digital video camera used. In this case, titles
and scenes may not be displayed correctly.
41
Using Media Player
Music mode
Music mode supports MP3 file format.
Access to “Music” mode (p. 37)
Media Player
Folder1
Folder view
Music
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Folder8
● To display the information of the
select
Access
EXIT
RETURN
Select
INFO
highlighted folder or music
● To playback from folder view
Select the folder
Start playback
R
SD Card
Info
Play Folder
Contents Select
(Thumbnail - Folder view)
select
Error display (images
that could not be
loaded, etc.)
access
Media Player
Folder view > music
Music
01 Music1
02 Music2
03 Music3
04 Music4
05 Music5
06 Music6
07 Music7
08 Music8
09 Music9
10 Music10
11 Music11
12 Music12
13 Music13
14 Music14
17 Music17
18 Music18
19 Music19
20 Music20
21 Music21
15 Music15
16 Music16
Play
EXIT
RETURN
Select
Info
SD Card
Contents Select
playback
(Thumbnail - File view)
Operation during playback
● To display / hide the operation guide
● To operate the playback
INFO
Rewind
Pause / Playback
Playback
Fast forward
Stop
● To the previous music
● To the next music
● The information banner is displayed as shown below.
R
G
select
Music title
Album title
Artist name
Playback starts
00:00.05 / 00:02.30
Elapsed time /
Total playing time
Music Setup Setup for Music mode
Display
the menu
MENU
Select “Music Setup”
Set
Main Menu
Picture
Sound
Photo Setup
Video Setup
access
select
Music Setup Menu
Repeat
Off
set
Music Setup
Drive Select
Menu
Music
Setup
Item
Adjustments / Configurations (alternatives)
Selects the repeated mode (Off / Folder / One)
Repeat Folder : All music in the selected folder are played back repeatedly.
One : The selected music is played back repeatedly.
Set background music for Photo mode
You can register your favourite music as background music for Photo mode.
● Select “User” in “Back Ground Music” “Photo Setup” (p. 39)
While playing
Select “File” or “Folder”
File : The current music will be
music, display the
and set
registered as back ground music.
selection screen
set
Folder: All the music in the current folder
Register Slideshow BGM ?
B
File
will be registered as back ground
Folder
select
music.
42
VIERA Link Functions
VIERA Link “
ControlTM”
Summary of features
DVD Player /
HD Video
Blu-ray Disc
Camera /
1
Player∗
LUMIX Camera∗1
Player
theatre∗2
∗5
Easy playback
Blu-ray Disc
theatre∗2
∗5
Power on link
Amplifier∗2
–
–
Power off link
Reduce unnecessary power consumption
in standby
∗4
Auto standby for unnecessary equipment
∗3
Control the menu of the connected
equipment by VIERA remote control
∗3
Speaker control
–
–
∗4
–
∗
∗
–
∗3
3
6
∗3
∗6
∗3
∗3
–
∗3
–
–
∗1: HDMI Connection only
∗2: HDMI and Audio out connections
∗3: available with the equipment which has “HDAVI Control 2 or later” function
∗4: available with the equipment which has “HDAVI Control 4 or later” function
∗5: while playing a disc
∗6: except for watching a disc
Advanced
Features
Connected equipment with
VIERA Link function
Using Media Player
VIERA Link Functions
Enjoy additional HDMI interoperability with Panasonic products which have “HDAVI Control” function.
This TV supports “HDAVI Control 5” function.
Connections to the equipment with HDMI cable such as HD Video Camera, Player theatre, Amplifier,
etc., allow you to interface them automatically.
These features are limited to models incorporating “HDAVI Control” and “VIERA Link”.
● Some functions are not available depending on the equipment’s version of HDAVI Control. Please
confirm the connected equipment’s version of HDAVI Control.
● VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry
standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have
developed and added. As such, its operation with other manufacturers’ equipment that supports
HDMI CEC cannot be guaranteed.
● Please refer to individual manuals for the equipment. About applicable Panasonic equipment,
consult your local Panasonic dealer.
43
VIERA Link Functions
Connection
● To use DVD Player / Blu-ray Disc Player / HD Video Camera / LUMIX Camera
DVD Player / Blu-ray Disc Player /
HD Video Camera / LUMIX Camera
with VIERA Link function
HDMI cable
● To use Player theatre / Blu-ray Disc theatre:
Speaker system
HDMI cable
Optical digital
audio cable
or
RCA cable
● To use Amplifier:
HDMI cable
Player theatre /
Blu-ray Disc theatre
with VIERA Link
function
∗7
Speaker system
Amplifier with
VIERA Link function
HDMI
cable
Optical digital
audio cable
or
RCA cable
∗7
HD Video Camera /
LUMIX Camera with
VIERA Link function
∗7: If the connected equipment has “HDAVI Control 5” function, you do not have to use this audio cable (Optical digital audio cable or
RCA cable). In this case, connect the equipment to the TV’s HDMI2 terminal via an HDMI cable.
● For DVD Player / Blu-ray Disc Player / HD Video Camera / LUMIX Camera with VIERA Link
function, connect to HDMI1, HDMI2 or HDMI3 terminal via an HDMI cable.
● For Player theatre / Blu-ray Disc theatre / Amplifier, connect to HDMI1, HDMI2 or HDMI3 terminal
via an HDMI cable, and also connect either the optical digital audio cable or RCA cable for audio
output from the TV.
● Use fully wired HDMI compliant cable. Non-HDMI-compliant cables cannot be utilized.
Recommended Panasonic’s HDMI cable part number:
• RP-CDHS15 (1.5 m)
• RP-CDHS30 (3.0 m)
• RP-CDHS50 (5.0 m)
Preparations
● Connect the equipment supporting VIERA Link.
● Set up the connected equipment. Read the manual of the equipment.
● For optimal recording, the settings of the recorder might be required. For details, read the manual of
the recorder.
● Set VIERA Link On in the Setup Menu “VIERA Link” (p. 26)
● Set up the TV After connection, turn the equipment on and then switch the TV on. Set the
input mode to HDMI1, HDMI2 or HDMI3 (p. 18), and make sure that an image is displayed
correctly.
This setup should be done each time when the following conditions occur:
• for the first time
• when adding or reconnecting equipment
• when changing setup
44
Features available
Easy playback
Automatic input switching - When the connected equipment is operated, input mode is switched
automatically.
Power on link
Set Power on Link “On” in the Setup Menu to use this function “Power on Link” (p. 26)
When the connected equipment starts playback or direct navigator / function menu for the equipment
are activated, the TV is automatically turned on. (Only when the TV is in Standby mode.)
Standby Power Save Reduce unnecessary power consumption in standby
Set Standby Power Save “On” in the Setup Menu to use this function
“Standby Power Save” (p. 26)
The power consumption in Standby mode of the connected equipment is controlled higher or lower
in synchronization with the TV On / Off state to reduce the consumption.
When the TV is set to Standby mode, the connected equipment is automatically set to Standby and
the power consumption in Standby mode of the connected equipment is automatically minimized.
When the TV is turned on, the connected equipment is still in Standby mode, but the power
consumption is increased to make startup time early.
● This function is effective if the connected equipment can change the power consumption in
Standby mode and is set to higher consumption.
● This function will work when “Power off Link” is set to “On”.
VIERA Link Functions
Power off link
Set Power off Link “On” in the Setup Menu to use this function “Power off Link” (p. 26)
When the TV is set to Standby mode, the connected equipment is also automatically set to Standby.
● This function will work even if the TV enters standby mode automatically by auto power standby
function.
Advanced
Intelligent Auto Standby Auto standby for unnecessary equipment
Set Intelligent Auto Standby “On (With reminder)” or “On (No reminder)” in the Setup Menu
to use this function “Intelligent Auto Standby” (p. 26)
When the TV is On, non-watched or non-used connected equipment goes into Standby mode
automatically to reduce the power consumption. For example, when the input mode is switched from
HDMI, when Speaker Selection is changed to “TV” (except for watching a disc).
● If you select “On (With reminder)”, the on screen message will be displayed to be noticed before
working this function.
● This function may not work properly depending on the connected equipment. If required, set to
“Off”.
45
VIERA Link Functions
Features available (Using VIERA Link Menu)
VIERA Link Control Operate the connected equipment with VIERA remote control
Access and operate the menu of the equipment
You can control some functions of the connected equipment with this TV remote control by pointing
at the TV’s signal receiver.
● If you cannot operate, check the settings and the equipment
“Summary of features”, “Connection”, “Preparations” (p. 43 and p. 44)
● For details of the operation of the connected equipment, read the manual of the equipment.
Display “VIERA Link Menu”
POWER
SAP
TV
MENU
AV
SURROUND SD CARD
Select “VIERA Link Control”
PC
INFO
EXIT
OPTION
R
VIERA Link Menu
VIERA Link Control
Speaker Selection
RETURN
G
Y
B
Recorder
Home Cinema
select
Select the equipment you want to access
The type of the connected equipment is displayed.
Select the type of the equipment and access.
VIERA Link Menu
VIERA Link Control
Speaker Selection
ASPECT P-NR OFF TIMER STILL
Recorder
Home Cinema
select
access
Recorder / Player / Home Cinema / Video Camera / LUMIX / Digital Camera / Other
● You can also access VIERA Link control by using VIERA TOOLS. p. 20
● The displayed item may vary depending on the connected equipment.
● “Home Cinema” means Player theatre, Blu-ray Disc theatre or Recorder theatre.
● “Other” means Tuner set top box.
The menu of the accessed equipment
(Input mode will be changed automatically)
Operate the connected equipment
1. Set the remote control code to “73” (p. 19)
2. Follow the operation guide
OPTION
To display the operation guide
Move the cursor / select the menu
Store / set / access
Return to the previous menu
Move the cursor / access / adjust
Exit the menu
G
Y
R
When the key words are displayed on colour bar
RETURN
EXIT
B
● Some operations may not be available depending on the equipment. If so, use its own remote control.
If multiple recorders or players are connected
VIERA Link Menu
VIERA Link Control
Speaker Selection
Recorder2
Home Cinema
Recorder1-3 /
Player1-3
The number is given from the TV’s lower
HDMI terminal number connected to the
same type equipment. For example, two
recorders to HDMI2 and HDMI3, in this case
the recorder connected to HDMI2 is displayed
as “Recorder1”, and the recorder connected
to HDMI3 is displayed as “Recorder2”.
46
If you access non-VIERA Link equipment
VIERA Link Menu
VIERA Link Control
Speaker Selection
Recorder
Home Cinema
Type of the
connected
equipment is
displayed.
You can access the menu of the equipment.
But you cannot operate it.
Use its own remote control to operate the
equipment.
Features available (Using VIERA Link Menu)
Speaker Selection
Speaker control
Access and control the speaker volume
You can control the theatre speaker with this TV remote control by pointing at the TV’s signal
receiver.
● If you cannot operate, check the settings and the equipment
“Summary of features”, “Connection”, “Preparations” (p. 43 and p. 44)
Display “VIERA Link Menu”
POWER
SAP
TV
AV
SURROUND SD CARD
INFO
EXIT
OPTION
RETURN
Select “Speaker Selection”
VIERA Link Menu
VIERA Link Control
Speaker Selection
Recorder
Home Cinema
select
Set to “Home Cinema” or “TV”
set
R
G
Y
B
ASPECT P-NR OFF TIMER STILL
Home Cinema
Player theatre, Blu-ray Disc theatre or Amplifier will be automatically
turned on if it is in Standby mode and the sound is from theatre
speakers connected to the equipment.
LAST
MUTE
POWER
● Volume up / down
● Mute MUTE
● The sound of TV speakers is mute.
● When the equipment is turned off, TV speakers will be active.
CH
REC
VIERA Link Functions
PC
TV
TV speakers are active.
Advanced
MENU
● If you wish to enjoy the multi-channel sound (e.g. Dolby Digital 5.1ch) via an Amplifier, connect
with HDMI cable and Optical digital audio cable (p. 44), and then select “Home Cinema”. If your
Amplifier has “HDAVI Control 5” function, you can connect only with HDMI cable. In this case,
connect your Amplifier to the TV’s HDMI2 terminal.
● These functions may not work properly depending on the connected equipment.
● Image or sound may not be available for the first few seconds when input mode is switched.
● Easy playback may be available by using the remote control for Player theatre, Blu-ray Disc theatre
or Amplifier. Read the manual of the equipment.
● “HDAVI Control 5” is the newest standard (current as of December, 2009) for HDAVI Control
compatible equipment. This standard is compatible with conventional HDAVI equipment.
“System Information” (p. 26)
● To confirm this TV’s version of HDAVI Control
47
External Equipment
These diagrams show our recommendations for how to connect the TV to your various equipment.
For other connections, consult the instructions for each piece of equipment, the table below, and the
specifications (p. 55).
Aerial
To record / playback
or
RF cable
DVD Recorder / VCR
Satellite
dish
To watch satellite broadcasts
Fully wired HDMI
compliant cable
Satellite
Set top box
cable
(Viewing)
(Listening)
Conversion adapter
(if necessary)
(Listening)
Computer
To watch DVDs
RCA cable
or
48
(Viewing)
(Listening)
To listen with
speakers
Amplifier with
speaker system
(Viewing)
PC
DVD Player
Optical digital audio cable
or
∗1
Fully wired HDMI compliant cable
Rear of the TV
Camcorder /
HDMI equipment
Fully wired HDMI
compliant cable
(M3 stereo
mini plug)
Camcorder /
Game equipment
External Equipment
(Viewing)
(Listening)
Headphones
HDMI equipment
To adjust volume
“HDMI connection”
(p. 44 and p. 51)
Fully wired HDMI
compliant cable
“Headphone Volume” in
the Sound Menu (p. 24)
DVD Recorder
18 +5V Power
16 SDA
14∗ Reserved
(in cable but N.C. on device)
12 TMDS Clock−
10 TMDS Clock+
8 TMDS Data0 Shield
6 TMDS Data1−
4 TMDS Data1+
2 TMDS Data2 Shield
Advanced
HDMI terminal
Hot Plug Detect
19
DDC/CEC Ground 17
SCL
15
CEC
13
TMDS Clock Shield 11
TMDS Data0−
9
TMDS Data0+
7
TMDS Data1 Shield 5
TMDS Data2−
3
TMDS Data2+
1
∗ HDMI2 only: ARC
Types of connectable equipment to each terminal
Terminal
Recording / Playback
(equipment)
AV1 IN
AV2 IN
AV3 IN
panel
( Side
of the TV )
To record / playback videocassettes / DVDs
(VCR / DVD recorder)
To watch DVDs (DVD player)
To watch camcorder images (Video camera)
To watch satellite broadcasts (Set top box)
To play games (Game equipment)
To use amplifier with speaker system
VIERA Link
MONITOR
OUT
DIGITAL
AUDIO
OUT
1
2
3
∗1
: Recommended Connection
∗1: applicable if your amplifier has ARC (Audio Return Channel) function
49
Technical Information
Channel Allocation (Analogue TV mode)
ANT in
CH DISPLAY
Antenna
Cable
RECEIVE CHANNEL
0
1
2
3
4
5
6
7
11
12
13
14
15
16
–
–
2
ANT in
CH DISPLAY
–
1
2
70
73
74
75
76
77
78
79
80
81
13
14
19
20
21
22
23
24
28
57
58
59
62
63
62
63
69
69
–
–
–
–
–
–
–
–
–
89
–
–
–
–
90
91
92
93
94
95
96
97
98
99
–
–
–
–
–
–
–
–
–
–
100
–
–
–
–
–
–
–
–
–
107
117
118
62
63
Antenna
Cable
RECEIVE CHANNEL
120
125
99
100
125
SD Card
2.1 mm
32 mm
● Use an SD Card which meets SD standards. If not, it may cause the TV to
malfunction.
● Do not remove the card while the TV is accessing data (this can damage card or TV).
● Do not touch the pins on the back of the card.
● Do not subject the card to a high pressure or impact.
● Insert the card in the correct direction (otherwise, card may be damaged).
● Electrical interference, static electricity, or erroneous operation may damage the
data or card.
● Back up the recorded data at regular intervals in case of deteriorated or damaged
24 mm
data or erratic operation of the TV. (Panasonic is not liable for any deterioration or
damage of recorded data.)
● About SD Card format and maximum capacity p. 36
On screen messages
Message
Cannot read file
No Device Inserted
No valid file to play
This operation is not possible
50
Meaning / Action
● The file is broken or unreadable.
● The TV does not support the format.
● Confirm SD Card or USB device is inserted correctly.
● The card has no data.
● Your operation is not available.
HDMI connection
HDMI (high-definition multimedia interface) is the world’s first complete digital consumer AV interface
complying with a non-compression standard.
HDMI allows you to enjoy high-definition digital images and high-quality sound by connecting the TV
and the equipment.
HDMI-compatible equipment (∗1) with an HDMI or DVI output terminal, such as a DVD player, a set
top box or a game equipment, can be connected to the HDMI terminal using an HDMI compliant (fully
wired) cable. About connections, see “External Equipment” (p. 48 and p. 49).
Applicable HDMI features
● Input audio signal : 2ch Linear PCM (sampling frequencies - 48 kHz, 44.1 kHz, 32 kHz)
● Input video signal : 480i, 480p, 576i, 576p, 720p, 1080i and 1080p
“Input signal that can be displayed” (p. 52)
Match the output setting of the digital equipment.
● Input PC signal : “Input signal that can be displayed” (p. 52)
Match the output setting of the PC.
● VIERA Link (HDAVI Control 5) : “VIERA Link” (p. 43)
● Audio Return Channel (∗2) (HDMI2 terminal only)
DVI connection
If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI
adaptor cable (∗3).
When the DVI to HDMI adaptor cable is used, connect the audio cable to the audio input terminal
(HDMI1 / 2: use AV2 audio terminals / HDMI3: use AV3 audio terminals).
● Audio settings can be made on the “HDMI1 / 2 / 3 Input” in the Sound Menu. (p. 25)
● If the connected equipment has an aspect adjustment function, set the aspect ratio to “16:9”.
● These HDMI connectors are “type A”.
● These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection)
copyright protection.
● An equipment having no digital output terminal may be connected to the input terminal of either
“COMPONENT” or “VIDEO” to receive analogue signals.
● This TV incorporates HDMI™ technology.
● Some PC models cannot be connected to this TV.
● When using PC, set the colour display quality of PC to the highest position.
● For details of the applicable PC signals, see p. 52.
● Max. display resolution
Aspect
4:3
1,440 × 1,080 pixels
16:9
1,920 × 1,080 pixels
● D-sub 15-pin connector signal
Pin No.
Signal Name
R
G
B
NC (not connected)
GND (Ground)
Pin No.
Signal Name
GND (Ground)
GND (Ground)
GND (Ground)
NC (not connected)
GND (Ground)
Pin No.
Signal Name
NC (not connected)
NC (not connected)
HD
VD
NC (not connected)
Technical
PC connection
A PC may be connected to this TV so that the PC screen is displayed and sound is heard from the TV.
● PC signals that can be inputted: Horizontal scanning frequency 31 to 69 kHz; vertical scanning
frequency 59 to 86 Hz. More than 1,024 signal lines could result in incorrect display of the image.
● A PC adaptor is not necessary for the DOS/V-compliant D-sub 15-pin connector.
Technical Information
(∗1): The HDMI logo is displayed on HDMI-compliant equipment.
(∗2): Audio Return Channel (ARC) is a function to be able to send digital sound signals via an HDMI cable.
(∗3): Enquire at your local digital equipment retailer shop.
51
Technical Information
Input signal that can be displayed
COMPONENT (Y, PB/CB, PR/CR), HDMI
∗ Mark: Applicable input signal
Signal name
COMPONENT
∗
∗
∗
∗
∗
∗
∗
∗
525 (480) / 60i
525 (480) / 60p
625 (576) / 50i
625 (576) / 50p
750 (720) / 60p
750 (720) / 50p
1,125 (1,080) / 60i
1,125 (1,080) / 50i
1,125 (1,080) / 60p
1,125 (1,080) / 50p
1,125 (1,080) / 24p
PC (from D-sub 15P)
Signal name
Signal name
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
Applicable input signal for PC is basically compatible to VESA standard timing.
Horizontal frequency (kHz)
Vertical frequency (Hz)
640 × 400 @70 Hz
640 × 480 @60 Hz
640 × 480 @75 Hz
800 × 600 @60 Hz
800 × 600 @75 Hz
800 × 600 @85 Hz
852 × 480 @60 Hz
1,024 × 768 @60 Hz
1,024 × 768 @70 Hz
1,024 × 768 @75 Hz
1,024 × 768 @85 Hz
1,280 × 1,024 @60 Hz
1,280 × 768 @60 Hz
1,366 × 768 @60 Hz
Macintosh13” (640 × 480)
Macintosh16” (832 × 624)
Macintosh21” (1,152 × 870)
PC (from HDMI terminal)
HDMI
31.47
31.47
37.50
37.88
46.88
53.67
31.44
48.36
56.48
60.02
68.68
63.98
47.70
48.39
35.00
49.73
68.68
70.07
59.94
75.00
60.32
75.00
85.06
59.89
60.00
70.07
75.03
85.00
60.02
60.00
60.04
66.67
74.55
75.06
Applicable input signal for PC is basically compatible to HDMI standard timing.
Horizontal frequency (kHz)
Vertical frequency (Hz)
640 × 480 @60 Hz
750 (720) / 60p
1,125 (1,080) / 60p
31.47
45.00
67.50
60.00
60.00
60.00
● Signals other than above may not be displayed properly.
● The above signals are reformatted for optimal viewing on your display.
● PC signal is magnified or compressed for display, so that it may not be possible to show fine detail
with sufficient clarity.
Licence
Even if no special notation has been made of company or product trademarks, these trademarks have
been fully respected.
● DVB and the DVB logos are trademarks of the DVB Project.
● VGA is a trademark of International Business Machines Corporation.
● S-VGA is a registered trademark of the Video Electronics Standard Association.
● SDXC Logo is a trademark of SD-3C, LLC.
● HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
● HDAVI ControlTM is a trademark of Panasonic Corporation.
● “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation.
● Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
● Macintosh is a trademark of Apple Inc.
52
Maintenance
First, remove the mains plug from the socket outlet.
Display panel, Cabinet, Pedestal
For regular care:
Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to clean the dirt
or fingerprints.
For stubborn dirt:
Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water).
Then wring the cloth and wipe the surface. Finally, wipe away all the moisture.
● Do not use a hard cloth or rub the surface too hard. This may cause scratches on the surface.
● Take care not to subject the TV’s surfaces to water or detergent. A liquid inside the TV could lead to
product failure.
● Take care not to subject the surfaces to insect repellent, solvent, thinner, or other volatile substances.
This may degrade surface quality or cause peeling of the paint.
● The surface of the display panel is specially treated and may be easily damaged. Take care not to
tap or scratch the surface with your fingernail or other hard objects.
● Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long
time. This may degrade surface quality.
Mains plug
Wipe the mains plug with a dry cloth at regular intervals. Moisture and dust may lead to fire or
electrical shock.
White spots or shadow images (noise)
connection of the aerial.
Neither image nor sound is
produced
● Is the TV in “AV mode”?
● Is the mains lead plugged into the
socket outlet?
● Is the TV turned On?
● Check the Picture Menu (p. 23 and
p. 24) and volume.
● Check all required cables and
connections are firmly in place.
An error message appears
● Follow the messages instructions.
● If the problem persists, contact your
local Panasonic dealer.
“VIERA Link” function does not work
and an error message appears
● Confirm the connection. (p. 44)
● Turn the connected equipment on and then switch
the TV on. (p. 44)
Permanently lit spots on screen
● Due to production process involved in this
technology this may result in some pixels which are
permanently lit or unlit. This is not a malfunction.
Contrast is reduced
● Contrast is lowered in the following conditions
without any user operation for a few minutes:
• no signal in Digital TV mode or AV mode
• selected locked channel
• selected invalid channel
• selected radio channel
• displayed menu
• Thumbnail or still picture
Technical
● Check the position, direction, and
Technical Information / Licence
Maintenance / FAQs
FAQs
Before requesting service or assistance, please follow these simple guides to resolve the problem.
If the problem still persists, please contact your local Panasonic dealer for assistance.
53
FAQs
Problem
Screen
Chaotic image, noisy
fluorescent lamp).
No image can be displayed
Blurry or distorted image
Sound
● Is “Colour” or “Contrast” in the Picture Menu set to the
minimum? (p. 23)
(no sound or low volume)
● Reset channels (p. 30 and p. 31).
Unusual image is displayed
● Turn off the TV with Mains power On / Off switch, then turn it
No sound is produced
Sound level is low
or sound is distorted
Unusual sound from the
display unit
Sound is unusual
HDMI
Actions
● Change the setting of “P-NR” in the Picture Menu (to remove
noise). (p. 23)
● Check nearby electrical products (car, motorcycle,
on again.
● Is “Sound Mute” active? (p. 10)
● Is the volume set to the minimum?
● Sound signal reception may be deteriorated.
● When power is on, drive noise may be heard from inside the
display unit (not a sign of faulty operation).
● Set the sound setting of the connected equipment to “2ch
L.PCM”.
● Check the “HDMI1 / 2 / 3 Input” setting in the Sound Menu.
(p. 25)
● If digital sound connection has a problem, select analogue
sound connection. (p. 51)
Pictures from external
equipment are unusual
when the equipment is
connected via HDMI
● Is the HDMI cable connected properly? (p. 44, 48 and p. 49)
● Turn Off the TV and equipment, then turn them On again.
● Check an input signal from the equipment. (p. 52)
● Use an equipment compliant with EIA/CEA-861/861B.
Due to the digital reception technologies involved, quality of the Digital TV signals may be
relatively low in some cases, despite good reception of Analogue TV channels.
● Install an aerial individually for the TV and VCR
(or use a splitter).
Digital TV
TV
Other
Aerial Output
VCR
Interference or
frozen / disappearing
image in Digital TV
54
(Individual aerial)
Unable to receive signals
with a high-performance
aerial
Aerial
Input
terminal
Aerial Output
Splitter
Aerial Input
(Individual aerial)
● Check “Digital TV Signal Condition” (p. 30).
If “Signal Quality” is displayed in red, check aerial. If problem
persists, consult your local Panasonic dealer.
● Turn the TV off with the Mains power On / Off switch, then
turn it On again.
● Auto power standby function is activated.
TV goes into Standby
● The TV enters Standby mode about 30 mins. after analogue
mode
broadcasting ends.
● Are the batteries installed correctly? (p. 3)
● Has the TV been switched On?
● Point the remote control directly at the front of the TV (within
The remote control does
about 7 m and a 30 degree angle of the front of the TV).
not work or is intermittent ● Situate the TV away from sunshine or other sources of
bright light not to shine on the TV’s remote control signal
receiver.
● Even when the temperature of parts of the front, top and
rear panels has risen, these temperature rises will not pose
Parts of the TV become hot
any problems in terms of performance or quality.
Specifications
AC 110 - 120 V, 50 / 60 Hz
Power Rating
330 W
Standby condition
0.4 W
Aspect Ratio
16:9
Visible screen size
127 cm (diagonal)
1,105 mm (W) × 622 mm (H)
Number of pixels
2,073,600 (1,920 (W) × 1,080 (H)) [5,760 × 1,080 dots]
Speaker
160 mm × 40 mm × 2 pcs, 6 Ω
Audio Output
20 W (10 W + 10 W)
Headphones
M3 (3.5 mm) stereo mini Jack × 1
PC signals
VGA, SVGA, WVGA, XGA
SXGA, WXGA ······ (compressed)
Horizontal scanning frequency 31 - 69 kHz
Vertical scanning frequency 59 - 86 Hz
Receiving Systems /
Band name
Digital TV: DVB-T
6 MHz VHF / UHF (Colombia) free-to-air TV broadcast reception
1. PAL-M
Reception of broadcast transmissions and Playback from VCR
2. PAL-N
or DVD
3. NTSC
Receiving Channels
(Analogue TV)
VHF BAND
2-13 (NTSC M USA)
Aerial - Rear
VHF / UHF
Operating Conditions
Temperature : 0 °C - 40 °C
Humidity
: 20 % - 80 % RH (non-condensing)
AUDIO L - R
RCA PIN Type × 2
VIDEO
RCA PIN Type × 1
Y
COMPONENT PB/CB, PR/CR
CATV
1-125 (USA CATV)
0.5 V[rms]
1.0 V[p-p] (75 Ω)
1.0 V[p-p] (including synchronization)
±0.35 V[p-p]
AV2
Input
AUDIO L - R
RCA PIN Type × 2
0.5 V[rms]
VIDEO
RCA PIN Type × 1
1.0 V[p-p] (75 Ω)
AV3
Input
AUDIO L - R
RCA PIN Type × 2
0.5 V[rms]
VIDEO
RCA PIN Type × 1
1.0 V[p-p] (75 Ω)
Monitor
Output
AUDIO L - R
RCA PIN Type × 2
0.5 V[rms] (high impedance)
VIDEO
HDMI1 - 3
Input
RCA PIN Type × 1
1.0 V[p-p] (75 Ω)
TYPE A Connectors
● This TV supports “HDAVI control 5” function.
HIGH-DENSITY D-SUB
15PIN
R / G / B: 0.7 V[p-p] (75 Ω)
HD / VD: TTL Level 2.0 - 5.0 V[p-p] (high impedance)
PC Input
Others
DIGITAL
AUDIO OUT
Card slot
USB
PCM / Dolby Digital, Fiber optic
FAQs
Specifications
Connection Terminals
AV1
Input
UHF BAND
14-69 (NTSC M USA)
SD Card slot × 1
USB 2.0 TYPE A Connector
DC 5V, Max. 500 mA
Dimensions ( W × H × D )
1,218 mm × 817 mm × 357 mm (With Pedestal)
1,218 mm × 769 mm × 93 mm (TV only)
Mass
30.5 k Net (With Pedestal)
29.0 k Net (TV only)
● Design and Specifications are subject to change without notice. Mass and Dimensions shown are
Technical
Sound
Display
panel
Power
Power Source
approximate.
55
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement