product list 2016

product list 2016
PRODUCT LIST 2016
CONTENTS
CONTENTS
CONTENTS
Torque Screwdrivers
TT Torque Wrenches
Electronic Torque Wrenches
Specialist Torque Wrenches
Professional Torque Wrenches
ClickTronic Torque Wrenches
Slimline™ Torque Wrenches
Industrial Torque Wrenches
Electrode Torque Wrenches
Spanner End Fittings
Manual Torque Multipliers
Electronic Torque Multipliers
Pneumatic Torque Multipliers
Accessories for Multipliers
Torque Measurement Instruments
Transducers
Transducer Leads
Loaders and Attachments
Test Fixtures
Hydraulic Tool Calibration Fixtures
Harsh Environment HE Range
Ultrasonic Measurement
Calibration Beams & Weights
Spares Kits
Service Replacement Torque Wrenches
Calibration Services
Terms and Conditions
NORBAR PROMOTIONAL MATERIAL
CATALOGUES & LEAFLETS
07426
General Catalogue
07510
Oil & Gas Leaflet
07513
Manufacturing & Assembly Leaflet
07514
Transportation Leaflet
07512
Aerospace Leaflet
07515
Energy Generation Leaflet
07557
Oil & Gas ETO Leaflet
07516
EvoTorque® Leaflet
07554
USM Leaflet
07560
T-Box XL™ Leaflet
07563
New Professional Leaflet
07536
ClickTronic Leaflet
PROMOTIONAL ITEMS
07509
Norbar Oval Logo Sticker (156mm)
07524
‘Made in England’ window sticker
07525
‘Made in England’ wall sticker
07533
Promotional Stickers (A4 sheet)
4
5
7
8
9
12
16
17
19
20
24
28
32
38
42
46
50
51
52
54
56
60
62
64
67
68
73
SQ1946 Set of Posters (various)
Distributed by
CUSTOMER RELATIONS
OFFICE OPENING HOURS
CONTACT DETAILS
Monday - Thursday 07:30 - 17:30
Friday
07:30 - 16:15
New Sales
Direct Tel +44 (0)1295 753600
Email [email protected]
Part No. 07437.16
After Sales Service
+44 (0)1295 753635
[email protected]
Norbar Torque Tools Ltd
Wildmere Road, Banbury
Oxfordshire, OX16 3JU
UNITED KINGDOM
www.norbar.com
© Norbar Torque Tools Ltd 2016
PRODUCT LIST 2016
Measurement & Calibration Section
FOLD
OUT
LEGEND
ON REVERSE
LEGEND
CONTENTS
TORQUE WRENCHES
CONTENTS
CONTENTS
CONTENTS
Accuracy (%)
Ratchet
Digital Display
Single Scale
Torque Handle
IP Rated
Dual Scale
Fixed
Case Included
Multi Scale
Calibration
Certificate
Adjustment
Lock
Torque & Angle
MANUAL TORQUE MULTIPLIERS
Accuracy (%)
Calibration
Certificate
Anti Wind-up
Ratchet
Adjustable
Reaction
UKAS
Certification
Case Included
POWERED TORQUE MULTIPLIERS
Air Consumption litres/sec
Adjustable
Reaction
Dual Scale
Lifting Attachment
Torque & Angle
Multi Scale
2 Speed
Calibration
Certificate
Digital Display
Bi-Directional
IP Rated
Bluetooth
Connection
Case Included
Accuracy (%)
19
TORQUE MEASUREMENT INSTRUMENTS
Accuracy (%)
Digital Display
Case Included
Multi Transducers
Calibration
Certificate
Back-up Data
Multi Scale
UKAS
Certification
Torque Screwdrivers
TT Torque Wrenches
Electronic Torque Wrenches
Specialist Torque Wrenches
Professional Torque Wrenches
ClickTronic Torque Wrenches
Slimline™ Torque Wrenches
Industrial Torque Wrenches
Electrode Torque Wrenches
Spanner End Fittings
Manual Torque Multipliers
Electronic Torque Multipliers
Pneumatic Torque Multipliers
Accessories for Multipliers
Torque Measurement Instruments
Transducers
Transducer Leads
Loaders and Attachments
Test Fixtures
Hydraulic Tool Calibration Fixtures
Harsh Environment HE Range
Ultrasonic Measurement
Calibration Beams & Weights
Spares Kits
Service Replacement Torque Wrenches
Calibration Services
Terms and Conditions
4
5
7
8
9
12
16
17
19
20
24
28
32
38
42
46
50
51
52
54
56
60
62
64
67
68
73
HYDRAULIC TOOL CALIBRATION FIXTURES
Accuracy (%)
HARSH ENVIRONMENT INSTRUMENTS
Accuracy (%)
UKAS
Certification
Multi Transducers
IP Rated
Multi Scale
Digital Display
Case Included
ULTRASONIC MEASUREMENT
Multi Scale
Back-up Data
Digital Display
Calibration
Certificate
Case Included
CALIBRATION BEAMS & WEIGHTS
UKAS
Certification
Case Included
www.norbar.com
75
CONTENTS
CONTENTS
Torque Screwdrivers
TT Torque Wrenches
Electronic Torque Wrenches
Specialist Torque Wrenches
Professional Torque Wrenches
ClickTronic Torque Wrenches
Slimline™ Torque Wrenches
Industrial Torque Wrenches
Electrode Torque Wrenches
Spanner End Fittings
Manual Torque Multipliers
Electronic Torque Multipliers
Pneumatic Torque Multipliers
Accessories for Multipliers
Torque Measurement Instruments
Transducers
Transducer Leads
Loaders and Attachments
Test Fixtures
Hydraulic Tool Calibration Fixtures
Harsh Environment HE Range
Ultrasonic Measurement
Calibration Beams & Weights
Spares Kits
Service Replacement Torque Wrenches
Calibration Services
Terms and Conditions
4
5
7
8
9
12
16
17
19
20
24
28
32
38
42
46
50
51
52
54
56
60
62
64
67
68
73
INTRODUCTION
INTRODUCTION
UNITED KINGDOM
UNITED STATES
CHINA
INDIA
SINGAPORE
AUSTRALIA
GLOBAL SERVICE
A FAMILY BUSINESS
We are the worlds foremost specialist in torque control
and we are engaged solely in the design, development and
production of torque tightening and measuring equipment.
Our customers include manufacturers and engineering
services in such diverse sectors as aerospace, energy, oil and
gas, mining and sub-sea.
There are sales and service branches in North America,
Australia, Singapore, China and India. In addition, we have
distributors of our torque control products in more than 60
countries around the world.
The Brodey family has owned Norbar since Bill Brodey
incorporated the company in 1943. We are now the third
generation of the family to manage the business and are
passionate about its every aspect.
At Norbar we are determined to bring our customers
advanced new products and this year we are excited to be
launching our ClickTronic torque wrench in this product list.
This new product combines the proven mechanism from our
Professional torque wrench family with a digital scale making
one of the most accurate and easy to use torque wrenches
on the market.
We continue to invest in the very latest design,
manufacturing and quality control technology to achieve
the highest level of innovation and precision in the field of
torque control and equipment.
The Norbar Directors from top left to
bottom right:
Catherine Rohll (Commercial Director),
Philip Brodey (Sales & Marketing Director),
Neill Brodey (Managing Director),
Craig Brodey (Director)
www.norbar.com
3
TORQUE MEASUREMENT INSTRUMENTS
TORQUE
TOOL NAME MEASUREMENT
TOOL NAME 0.1 N�m - 25 N�m
TRUCHECK™
Norbar started manufacturing electronic torque
measuring instruments in the early 1970s and now offers a
comprehensive range, from the easy to use, cost effective
TruCheck™ through to the sophisticated T-Box XL™ and
TDMS software, which provides the complete solution for
torque tool calibration, data logging and data management.
Norbar torque measuring instruments are renowned for
high accuracy and superb reliability. Indeed, many of those
early instruments are still in regular use today. For our
interchangeable transducer instruments, we remain one
of the few manufacturers in the world that issue a UKAS
accredited calibration certificate both for the instrument and
for the torque transducer. In so doing, customers can swap
combinations of instrument and transducer while retaining
complete traceability.
Norbar’s torque transducers have established an excellent
reputation based on exceptional quality and accuracy. A very
wide torque range is covered, 0.04 N�m to 100,000 N�m
and three basic transducer configurations are offered; Static,
Impulse Rotary and Annular.
All transducers up to 100,000 N�m are supplied as standard
with a UKAS accredited calibration certificate from Norbar’s
in-house laboratory.
For customers who wish to take advantage of Norbar’s
transducers but have an existing, non Norbar display
instrument, transducers can be provided with a mV/V
calibration.
Norbar’s instruments and transducers are complemented
by a wide range of ancillary products. Within this group are
the products that would be required to set up a torque
calibration laboratory, for example, torque wrench loaders
meeting ISO requirements and precision beam and weight
systems for calibration of torque transducers.
Trucheck™ 0.1 N�m - 25 N�m
Trucheck™ 10 N�m - 2000 N�m
Pro-Test
TST
TTT
T-Box XL™
TDMS Software
Spares for Instrumentation Products
Part Number Suffix System
Transducers FMT
Static Transducers
Rotary Transducers
Annular Transducers
Transducer Leads
Loaders and Attachments
Test Fixtures
42
43
43
44
44
45
45
45
45
46
47
48
49
50
51
52
TruCheck™ Plus 25
For simple, cost effective testing of torque screwdrivers and
torque wrenches
•Allows torque tool performance to be monitored and tools kept in
peak condition
•Two versions, TruCheck™ and TruCheck™ Plus
•Basic version has no settable options. Ideal for non-expert users
•TruCheck™ Plus allows selection of torque units and modes for
‘click’ and dial type wrenches
•‘Plus’ version allows operator to set a target value and tolerance
•Supplied with traceable calibration certificate
TruCheck™ Plus 3 & 10
4
TRUCHECK™
43253*
43250 *
TruCheck™ 0.1 - 3.0 N�m
TruCheck™ Plus 0.1 - 3.0 N�m
43254*
TruCheck™ 1 - 10 N�m
43251*
TruCheck™ Plus 1 - 10 N�m
43255
TruCheck™ 1 - 25 N�m
43252+
TruCheck™ Plus 1 - 25 N�m
+
43250, 43251, 43253 and 43254 supplied with ¼" male hexagon plus
¼" female hex to female sq. adaptor
+
43252 and 43255 supplied with ¼" female hex to ¼" female sq. adaptor
and ¼" female hex to 3 �8 " female sq. Adaptor 43252 and 43255
*
NOTE: UKAS accredited calibration is from 2% to 100% of full scale for
43253 & 43250 and from 10% to 100% of full scale for 43254 & 43257
and from 4% to 100% of full scale for 43255 & 43252.
42
Norbar Product
Listand
2016
Catalogue
Price List 2016
TORQUE MEASUREMENT INSTRUMENTS
TRUCHECK™ 10 N�m - 2000 N�m
TOOL NAME
PRO-TEST
One of the concerns in putting a torque tester into an environment
where people are not calibration specialists is that incorrect selections
will be made with the potential of incorrect tool setting and
consequently joint failure.
The ‘TruCheck™’ torque wrench testers aim to cut the cost of
purchasing a torque wrench calibration system, and remove the fears
over the complexity of using such equipment.
There are two versions available, the ‘TruCheck™’ being the most basic
version, and the ‘TruCheck™ Plus’ having greater functionality, to offer
more flexibility.
The Professional Torque Tester - Series 2, Pro-Test, is an
accurate, highly specified and easy to operate instrument for
testing and calibrating all types of torque wrench.
4
TRUCHECK™
43221*
43226*
TruCheck™ 10 - 350 N�m
TruCheck™ 10 - 250 lbf�ft
43222*
TruCheck™ Plus 10 - 350 N�m
43230+
TruCheck™ 100 - 1000 N�m
43237+
TruCheck™ 75 - 750 lbf�ft
43231+
TruCheck™ Plus 100 - 1000 N�m
43244 @
TruCheck™ 200 - 2000 N�m
43245 @
TruCheck™ Plus 200 - 2000 N�m
TCACC.CW UKAS accredited calibration - clockwise
TCACC.
UKAS accredited calibration - clockwise and
CW+CCW
counter clockwise
43221, 43222 and 43226 supplied with ½" female square drive
+
43230, 43231 and 43237 supplied with 27mm male hexagon plus
¾" sq. dr. socket
@
43244 and 43245 supplied with 27mm male hexagon plus 1" sq.dr socket
•‘Pro-Test’ is priced to make in-house testing a viable proposition even
for the smaller industrial and automotive torque wrench user.
•Guaranteed classification to BS7882:2008 , Class 1 or better over the
primary calibration range (20% to 100% of full scale), Class 2 or better
over the secondary calibration range (lowest calibrated value to 20% of
full scale). Class 1 equates to ±0.5% of reading.
•Three essential operating modes allow the Pro-Test to be used with all
torque wrench types ‘Track’ displays the live value, ‘Peak Memory’ records
the highest value and ‘First Peak Memory’ records the first peak of torque
(for click type torque wrenches). Both memory modes can be used with
manual or automatic reset.
•Large back lit display is easily visible from a distance and in poor light.
•Display and Transducer are hard-wired together with a 600 mm cable.
•All common units of torque measurement are included.
•Pictorial mode selection incorporated for ease of use.
•User can select the language they wish to work in (most European
languages are included).
•Transducer can be mounted for torque wrench operation in the
horizontal or vertical plane.
•RS-232-C is included for the output of reading to a printer, PC, data
capture unit, SPC software etc.
•Optional mounting plate gives greater flexibility of mounting options.
•All user settable parameters are menu selectable from the front panel.
•Supplied in a robust carry case with a data transfer lead to connect to a
PC or printer.
•As standard, all transducers are calibrated in a clockwise direction. For
additional anti clockwise direction order Part No. PROTEST.CCW.
4
PRO-TEST (Professional Torque Tester Series 2)
Clockwise Calibration only
43218
Pro-Test 60, 1.2 - 60 N�m
43219
Pro-Test 400, 8 - 400 N�m
43220
Pro-Test 1500, 30 - 1500 N�m
4
ANCILLARY PRODUCTS FOR PRO-TEST
*
NOTE: UKAS accredited calibration is from 5% to 100% of full scale for
43221, 43226, 43222 and 10% to 100% for 43230, 43231, 43237, 43244 &
43245.
62198.BLK9005 Mounting Bracket
60253
12v DC Power Supply for Series 2
29190
1" x 36mm socket
PROTEST.CCW Counter Clockwise Calibration when ordered with
new unit
T +44 (0)1295 753 600 | F +44 (0)1295 753 609 | E [email protected] | www.norbar.com
43
TORQUE MEASUREMENT INSTRUMENTS
TOOL NAME
TST
TOOL NAME
TTT
The TST combines simplicity with up to date technology
to provide a high quality instrument for the testing and
calibration of low capacity torque tools.
The TTT shares all of the extensive features of the TST except
that it has no internal transducer. Instead, the TTT offers not
one but three external transducer interfaces allowing any three
transducers to be simultaneously connected. Selection between
the transducers is made by a rotary switch at the back of the
instrument case.
Featuring an internal transducer complete with Rundown Fixture, the
TST is available in 3 torque ranges, 0.04 to 2 N�m, 0.5 to 10 N�m
and 1.25 to 25 N�m. Class 1 system accuracy over its Primary range
(±0.5% of reading from 20% to 100% of full scale).
What makes the TST genuinely versatile is the interface for an
external transducer. This interface, accessed by a 2 way switch on the
TST, allows the connection of any transducer from Norbar’s “SMART"
range and most mV/V calibrated transducers from Norbar or other
manufacturers.
•Pictorial display panel for easy mode selection.
•Limit detection with low, pass and fail indication. Up to 8 target
values can be set.
•Digital limit state output for control of external tools.
•Operation from fast charge internal battery pack (maximum time
of 3 hours 20 minutes for full charge) or a.c. supply (90 to 264
Volts).
•RS-232-C serial data interface for connection to a printer or PC.
Continuous RS 232 output when used in track mode (up to 11
readings per sec).
•Pulse count feature in Impulse mode and Clutch Tool mode.
•‘SMART’ intelligence for transducer recognition.
•Memory for calibration details of 20 non-’SMART’ mV/V calibrated
transducers.
•Analogue output allows the instrument to be used as part of a
process control system for performance analysis.
•User selectable frequency response for each mode of operation.
•All user selectable features have password protection. The
instrument can be issued to users with only the required modes of
operation and units of measure enabled. This feature can virtually
eliminate operator induced errors.
4
TST (Torque Screwdriver Tester Series 2)
43212
43213
TST 2, 0.04 - 2 N�m
TST 10, 0.5 - 10 N�m
43214
TST 25, 1.25 - 25 N�m
TST.CCW
Counter clockwise calibration when ordered with new unit
TST is supplied complete with a Rundown Fixture for joint simulation.
Additional rundowns are available see page 52.
44
Norbar Product
Listand
2016
Catalogue
Price List 2016
Any transducer from Norbar’s ‘SMART’ range and most mV/V calibrated
transducers from Norbar or other manufacturers can be connected to
the TTT. The ‘SMART’ feature means that once a transducer has been
connected, the instrument will automatically recognise calibration details
such as mV/V output, serial number and capacity.
•Pictorial display panel for easy mode selection.
•Limit detection with low, pass and fail indication. Up to 12 target values
can be set.
•Digital limit state output for control of external tools.
•Operation from fast charge internal battery pack (maximum time of 3
hours 20 minutes for full charge) or a.c. supply (90 to 264 Volts).
•RS-232-C serial data interface for connection to a printer or PC.
Continuous RS 232 output when used in track mode (up to 11
readings per sec).
•Pulse count feature in Impulse mode and Clutch Tool mode.
•‘SMART’ intelligence for transducer recognition, now displays
transducer capacity, units and Serial No.
•Memory for calibration details of 20 non-’SMART’ mV/V calibrated
transducers.
•Analogue output allows the instrument to be used as part of a
process control system for performance analysis.
•User selectable frequency response for each mode of operation.
•All user selectable features have password protection.The instrument
can be issued to users with only the required modes of operation and
units of measure enabled.This feature can virtually eliminate operator
induced errors.
•Peak memory modes can now be configured to have auto reset
(previously only manual reset was possible).
•Series 3 users can set up their own measurement units, making it
possible to interface with non torque transducers, for example load or
pressure.
4
TTT (TORQUE TOOL TESTER SERIES 3)
43228
TTT.CCW
TTT Instrument
Counter clockwise calibration when ordered with new unit
TORQUE MEASUREMENT INSTRUMENTS
T-BOX XL™
TOOL SOFTWARE
TDMS
NAME
4
TDMS SOFTWARE
61132
TDMS Software (supplied on USB Flash Drive)
Supplied as standard with T-Box XL™.
The T-Box XL™ together with Norbar’s Torque Data
Management System (TDMS) software provides the
complete solution for torque tool calibration, data logging
and data management and archiving on your PC.
•Can be used as a hand held portable device – using the provided
neck strap – or bench mounted.
•Features a 7" (178mm) colour touch screen LCD display with on
screen graphic icons for simple and easy tool selection.
•Can connect up to 4 Smart Transducers including transducers with
angle capabilities for instant connectivity. Alternatively, non Norbar
transducers with a mV/V output can be programmed into the
T-Box XL memory.
•2 USB ports, one RS232 serial port and an ancillary connection
(USB cable supplied as standard).
•Supplied with Norbar’s Torque Data Management System software
(TDMS) for complete tool data management and archiving on your
PC.
•T-Box XL contains a large capacity memory that will enable a user
to collect data and store in excess of 100,000 individual test results
directly to the instrument and then synchronise to the TDMS
software.
•Includes 8 modes for torque tool measurement: Track, Click, Dial &
Electronic, Stall, Screwdriver, Hydraulic, Graph and Pulse.
•Pre-loaded with Tool Templates for the entire Norbar product
range of Torque Wrenches, PneuTorques and EvoTorques, enabling
the user to simply assign individual tools to perform calibrations to
the relevant ISO standard.
4
T-BOX XLTM
43258
T-Box XL™ Instrument with TDMS Software
SPARES FOR INSTRUMENTATION PRODUCTS
4
SPARES FOR INSTRUMENTATION PRODUCTS
38876
39406
Rechargeable Battery Pack for Pro-Log, TST & TTT
Battery Pack for T-Box and T-Box XL™
29610
¼" Female – ½" Male Sleeve Adaptor
29611
½" Female – ¾" Male Sleeve Adaptor
29612
½" Female – 1" Male Sleeve Adaptor
29613
¾" Female – 1" Male Sleeve Adaptor
29614
3
⁄8 " Female – ½" Male Sleeve Adaptor
4
SERIAL DATA LEAD KIT
60248
Serial Data Lead Kit
Note: Serial Data Lead Kit is not suitable for use with HE Instrument and
TruCheck™
60259
USB to Serial Data Lead (Does not work with USM)
This kit enables Norbar “CE Marked" instruments (Post January 1996 ETS,
TWA and DTS plus all Pro-Test, TST and TTT) to connect to most PCs.
PART NUMBER SUFFIX SYSTEM
Transducers can be ordered for use with Norbar’s current range of
instruments (TST, TTT, TTL-HE and T-Box XL™), and as Industry
Standard (mV/V calibrated) for certain display instruments from
other manufacturers.
A part number suffix system is used to identify the type of calibration
required. For example, a 1000 N�m Static Transducer for use with a
TTT instrument would become part number 50772.LOG.
SUFFIX
USAGE
CERTIFIED IN
.LOG
.IND
TST, TTT, TTL-HE & T-Box XL™
Torque Units
Instruments of non Norbar manufacture
mV/V
(check with Norbar for suitability)
and TST, TTT, TTL-HE & T-Box XL™
Where the transducer suffix .LOG is used, the transducer is calibrated
with an instrument, as a system, a calibration certificate is provided in
torque units. A full scale mV/V figure is also supplied.
T +44 (0)1295 753 600 | F +44 (0)1295 753 609 | E [email protected] | www.norbar.com
45
TORQUE MEASUREMENT INSTRUMENTS
TOOL NAME FMT
TRANSDUCERS
TOOL NAME
Flange Mounted Transducers incorporate mounting points for securely fixing the transducer to the working surface. The
transducer lead is also included and is fitted with a high quality Lemo® connector, suitable for attachment to TST, TTT and
T-Box XL™ instruments.
All are ‘SMART’ which means they have a built in memory circuit containing essential information about the transducer, that
Norbar’s instruments will immediately recognise.
4
FMT (Flange Mounted Transducers)
4
FMT (Flange Mounted Transducers)
50671.LOG*
50671.IND*
0.04-2 N�m ¼" sq. dr. with Joint Simulator
50676.LOG
30-1500 N�m ½", ¾" + 1" sq. dr.
0.04-2 N�m ¼" sq. dr. with Joint Simulator
50676.IND
30-1500 N�m ½", ¾" + 1" sq. dr.
50672.LOG
0.5-10 N�m ¼" sq. dr. with Joint Simulator
50682.LOG
20-1000 lbf�ft ½", ¾" + 1" sq. dr.
50672.IND
0.5-10 N�m ¼" sq. dr. with Joint Simulator
50682.IND
20-1000 lbf�ft ½", ¾" + 1" sq. dr.
50673.LOG
1.25-25 N�m ¼" + 3 �8" sq. dr. with Joint Simulator
TD1. CCW
50673.IND
1.25-25 N�m ¼" + 3 �8" sq. dr. with Joint Simulator
50677.LOG*
0.4-20 lbf�in ¼" sq. dr. with Joint Simulator
50677.IND*
0.4-20 lbf�in ¼" sq. dr. with Joint Simulator
50678.LOG
5-100 lbf�in ¼" sq. dr. with Joint Simulator
50678.IND
5-100 lbf�in ¼" sq. dr. with Joint Simulator
50679.LOG
12.5-250 lbf�in ¼" + 3 �8" sq. dr. with Joint Simulator
50679.IND
12.5-250 lbf�in ¼" + 3 �8" sq. dr. with Joint Simulator
If using this transducer with a Series 1 TST or TTT (Part No. s 43198 - 43201) or
a Pro-Log Display instrument, please contact Norbar.
*
46
Counter clockwise calibration for FMT & STB when
ordered with new unit
Includes integral transducer lead with connector to suit TST, TTT and
T-Box XL™
4
FMT (Ancillary Section)
50539
50540
2 N�m Joint Simulator (also fits TST)
10 N�m Joint Simulator (also fits TST)
50541
25 N�m Joint Simulator (also fits TST)
50692
150 N�m Joint Simulator
50819
400 N�m Joint Simulator
52236
¼" Hexagon - ¼" Square Drive Adaptor
52237
¼" Hexagon - 3 �8" Square Drive Adaptor
52251
3
52246
½" Female Square - 22mm Bi Square Adaptor
52245
¾" Female Square - 22mm Bi Square Adaptor
52254
½" Female Square - 35mm Bi Square Adaptor
52241
¾" Female Square - 35mm Bi Square Adaptor
52242
1" Female Square - 35mm Bi Square Adaptor
4
FMT (Flange Mounted Transducers)
50674.LOG
50674.IND
7.5-150 N�m ½"+ 3 �8"sq. dr. with Joint Simulator
7.5-150 N�m ½"+ 3 �8"sq. dr. with Joint Simulator
50680.LOG
5-100 lbf�ft ½"+ 3 �8"sq. dr. with Joint Simulator
50680.IND
5-100 lbf�ft ½"+ 3 �8"sq. dr. with Joint Simulator
50675.LOG
20-400 N�m ½"+ ¾" sq. dr.
50675.IND
20-400 N�m ½"+ ¾" sq. dr.
50681.LOG
12.5-250 lbf�ft ½"+ ¾" sq. dr.
4
50681.IND
12.5-250 lbf�ft ½"+ ¾" sq. dr.
62221.BLK9005
62220.BLK9005
Norbar Product
Listand
2016
Catalogue
Price List 2016
�8" Female Square - 22mm Bi Square Adaptor
FMT Mounting Bracket 2 to 400 N�m
FMT Mounting Bracket 150 to 1500 N�m
TRANSDUCERS
STATIC TRANSDUCERS
TOOL NAME
The accuracy and quality of the Norbar Static Torque Transducers has made them the first choice of many calibration
laboratories throughout the world. Up to 5000 N�m (5000 lbf�ft) classified to BS7882:2008, typically better than Class 1 for the
primary classification range (±0.5% of reading from 20% to 100% of full scale).
•Robust, heat treated, alloy steel torsion shaft design.
•Designed to ignore non torsional forces.
•Operates in clockwise and anti-clockwise directions.
•Calibration up to 100,000 N�m with a UKAS accredited Certificate.
•Calibrated in clockwise direction as standard. Anti-clockwise provided
on request.
4
STATIC TRANSDUCERS
50587.xxx *
0.1-1 N�m
•‘SMART’ transducers have a built in memory circuit which contains
essential information about the transducer.This information can be read by
Norbar’s TST, TTT, TTL-HE & T-Box XL™ instruments meaning that when
the transducer is connected, it is immediately recognised and ready for use.
•‘SMART’ transducers can also be used with many other instruments.
However, these will operate as normal ratio calibrated (mV/V)
transducers - the ‘SMART’ data will not be read.
4
STATIC TRANSDUCERS
¼" M x ¼" F
50703.xxx
250-2500 N�m
1½" M x 1½" F
300-3000 N�m
1½" M x 1½" F
50588.xxx
0.25-2.5 N�m
¼" M x ¼" F
50791.xxx
50589.xxx
0.5-5 N�m
¼" M x ¼" F
50599.xxx
500-5000 N�m
1½" M x 1½" F
50590.xxx
1-10 N�m
¼" M x ¼" F
50669.xxx @
700-7000 N�m
1½" M x 1½" F
50591.xxx
2.5-25 N�m
3
⁄8 " M x 3⁄8 " F
50704.xxx
250-2500 lbf�ft
1½" M x 1½" F
50592.xxx
5-50 N�m
3
⁄8 " M x 3⁄8 " F
50630.xxx
500-5000 lbf�ft
1½" M x 1½" F
50593.xxx
10-100 N�m
½" M x ½" F
[email protected]
50594.xxx
25-250 N�m
½" M x ½" F
50701.xxx
25-250 N�m
¾" M x ¾" F
50596.xxx
50-500 N�m
¾" M x ¾" F
50776.xxx
Alternative calibration direction for transducers from
1501 N�m to 7000 N�m / 1001 lbf�ft to 5000 lbf�ft when
ordered with new unit
1000-10000 N�m
2½" M x 2½" F
50772.xxx
100-1000 N�m
1" M x 1" F
50603.xxx
2500-25000 N�m
50766.xxx
150-1500 N�m
1" M x 1" F
50797.xxx
2500-25000 N�m
2½" M x 2½" F
50611.xxx
0.1-1 lbf�ft
¼" M x ¼" F
50781.xxx
5000-50000 N�m
2½" M x 2½" F
50615.xxx
0.5-5 lbf�ft
¼" M x ¼" F
50794.xxx *
5000-50000 N�m
3½" M x 3½" M
50618.xxx
1-10 Ibf�ft
¼" M x ¼" F
50783.xxx
8000-80000 N�m
3½" M x 3½" F
50620.xxx
2.5-25 lbf�ft
3
50796.xxx
10000-100000 N�m
3½" M x 3½" M
50622.xxx
5-50 lbf�ft
3
50777.xxx
1000-10000 lbf�ft
2½" M x 2½" F
50624.xxx
10-100 lbf�ft
½" M x ½" F
50633.xxx
1000-10000 lbf�ft
2½" M x 2½" M
50625.xxx
25-250 lbf�ft
½" M x ½" F
50702.xxx
25-250 lbf�ft
¾" M x ¾" F
50635.xxx
50798.xxx
2500-25000 lbf�ft
2500-25000 lbf�ft
2½" M x 2½" M
2½" M x 2½" F
50627.xxx
50-500 lbf�ft
¾" M x ¾" F
50799.xxx
3000-30000 lbf�ft
2½" M x 2½" F
50773.xxx
100-1000 lbf�ft
1" M x 1" F
50795.xxx
5000-50000 lbf�ft
3½" M x 3½" M
50610.xxx *
1-10 lbf�in
¼" M x ¼" F
50782.xxx
6000-60000 lbf�ft
3½" M x 3½" F
50612.xxx
2.5-25 lbf�in
¼" M x ¼" F
50637.xxx+
10000-100000 lbf�ft
3½" M x 3½" M
50614.xxx
50617.xxx
50619.xxx
5-50 lbf�in
10-100 lbf�in
25-250 lbf�in
¼" M x ¼" F
¼" M x ¼" F
3
⁄8 " M x 3⁄8 " F
TD3.CCW+
50621.xxx
Alternative calibration direction for transducers from
7001 N�m to 100000 N�m / 5001 lbf�ft to 100000 lbf�ft
when ordered with new unit
15000-150000 N�m
4½" M x 4½" M
50-500 lbf�in
3
50623.xxx
100-1000 lbf�in
½" M x ½" F
50609.xxx *
10-100 ozf�in
¼" M x ¼" F
TD2.CCW
Alternative calibration direction for transducers up to
1500 N�m / 1000 lbf�ft when ordered with new unit
⁄8 " M x ⁄8 " F
3
⁄8 " M x ⁄8 " F
3
⁄8 " M x 3⁄8 " F
M=Male F=Female
Standard Calibration is performed loading clockwise only
-
2½" M x 2½" M
20000-200000 N�m
4½" M x 4½" M
.LOG versions not suitable for TST, TTT or TTL-HE, but can be used
with T-Box.
@
UKAS accredited calibration up to 6000 N�m. A non accredited value
at 7000 N�m is extrapolated and provided for reference only.
+
UKAS accredited calibration up to 80000 lbf�ft. A non accredited
value at 100000 lbf�ft is extrapolated and provided for reference only.
*
T +44 (0)1295 753 600 | F +44 (0)1295 753 609 | E [email protected] | www.norbar.com
47
TRANSDUCERS
TOOL NAME
STATIC
TRANSDUCERS (continued)
4
SECCAL.CW
SECCAL.CW+CCW
ADDCALPOINTS.
NEW
STATIC TRANSDUCERS
Secondary Calibration in one direction on static
transducers with 2.5" square drives to extend
the range below 10% of the rated capacity, when
ordered with new unit
Secondary Calibration in two directions on static
transducers with 2.5" square drives to extend
the range below 10% of the rated capacity, when
ordered with new unit
Additional calibration steps below 10% of rated
capacity to 2% for transducers up to 7000 N�m
(5000 lbf�ft) when ordered with new unit
Bench stands ensure the correct mounting of Norbar's Static Torque
Transducers up to 5000 N�m (5000 lbf�ft).
4
TOOL NAME
ROTARY
TRANSDUCERS
50211
BENCH STANDS FOR STATIC TORQUE
TRANSDUCERS
Small frame size (10 N�m) ¼" sq.
50212
Small frame size (50 N�m) 3⁄8 " sq.
50213
Small frame size (100/250 N�m) ½" sq.
50220
Large frame size (250/500 N�m) ¾" sq.
50221
Large frame size (1000/1500 N�m) 1" sq.
50127.BLK9005 Extra large size (7000 N�m) 1½" sq.
Rotary transducers are designed to measure the torque
from continuously rotating shafts such as Impulse Power
Tools and certain non-impulse tools with a severe clutch
action.
This range offers class leading performance with impulse tools and
will be supplied with a UKAS accredited calibration certificate from
Norbar’s laboratory.
These trandsucers are known as ‘SMART’ transducers. They have
built-in intelligence in the form of a memory circuit which contains
essential information about the transducer which can be read by the
appropriate type of instrument (TST, TTT, TTL-HE & T-Box XL™),
thus reducing set-up time.
They will also work with instruments that cannot read the memory
information, by inputting the relevant calibration details manually.
Not for use with Impact Tools.
Angle measurement also available.
52014
¼" Insert for Small Bench Stands
52015
3
52016
½" Insert for Small Bench Stands
4
ROTARY TRANSDUCERS
52017
¾" Insert for Large Bench Stands
52018
1" Insert for Large Bench Stands
50708.xxx
50709.xxx
0.25-5 N�m ¼" M/F Hex
1-20 N�m ¼" M/F Hex
50710.xxx
1-20 N�m ¼" F/M sq. dr.
50719.xxx
0.75-15 lbf�ft ¼" F/M sq. dr.
50711.xxx
3.75-75 N�m 3⁄8 " F/M sq. dr.
50720.xxx
2.5-50 lbf�ft 3⁄8 " F/M sq. dr.
50712.xxx
10-200 N�m ½" F/M sq. dr.
50721.xxx
7.5-150 lbf�ft ½" F/M sq. dr.
50713.xxx
12.5-250 N�m ¾" F/M sq. dr.
50722.xxx
10-200 lbf�ft ¾" F/M sq. dr.
50714.xxx
25-500 N�m ¾" F/M sq. dr.
50723.xxx
15-300 lbf�ft ¾" F/M sq. dr.
50715.xxx
75-1500 N�m 1" F/M sq. dr.
⁄8 " Insert for Small Bench Stands
50724.xxx
50-1000 lbf�ft 1" F/M sq. dr.
TD2. CCW Counter clockwise calibration.
Angle options available, contact Norbar.
48
Norbar Product
Listand
2016
Catalogue
Price List 2016
TRANSDUCERS
ANNULAR TRANSDUCERS
TOOL NAME
These Annular Transducers are designed to fit directly to Norbar torque multipliers and will accurately measure the torque output
from the gearbox, via a display instrument (Instrument supplied separately).
•Up to 5000 N�m (5000 lbf�ft) classified to BS7882:2008, typically better than Class 1 for the primary classification range (±0.5% of reading from 20%
to 100% of full scale).
•Robust heat treated alloy steel torsion tube design.
•Designed to ignore non torsional forces.
4
ANNULAR TRANSDUCERS FOR
HT/ET/PTM-92 AND HT/ET/PTM-119 SERIES
Suitable for HT/ET/PTM-92
50753.xxx
270-2700 N�m 1" sq. dr.
50793.xxx
400-4000 N�m 1" sq. dr.
Suitable for HT/ET/PTM-119
50755.xxx
450-4500 N�m 1½" sq. dr.
50756.xxx
4
ANNULAR TRANSDUCERS FOR 72MM SERIES
GEARBOX (HT & PT)
(Not suitable for PTM tools)
Suitable for PT 72mm Remote series and HT-72
50666.xxx
100-1000 N�m
50667.xxx
150-1500 N�m
50668.xxx
200-2000 N�m
Standard Calibration is performed loading counter clockwise only. (Not
suitable for PTM tools).
600-6000 N�m 1½" sq. dr.
Standard Calibration is performed loading counter clockwise only.
4
ANNULAR TRANSDUCERS FOR SMALL DIAMETER
SERIES GEARBOX (HT & PT)
Suitable for HT60 and PT5500
50663.xxx
600-6000 N�m 1½" sq. dr.
Standard Calibration is performed loading counter clockwise only.
•‘SMART’ transducers have a built in memory circuit which contains essential information about the transducer. This information can be read
by Norbar’s TST, TTT, TTL-HE & T-Box XL™ instruments meaning that when the transducer is connected, it is immediately recognised and
ready for use.
•‘SMART’ transducers can also be used with many other instruments. However, these will operate as normal ratio calibrated (mV/V) transducers - the
‘SMART’ data will not be read.
4
ANNULAR TRANSDUCERS FOR
STANDARD SERIES GEARBOX
Suitable for PT1, PT1A and PT2
50638.xxx
100-1000 N�m ¾" sq. dr.
50648.xxx
TD2.CCW
150-1500 lbf�ft 1" sq. dr.
50640.xxx
Alternative calibration direction for transducers up to
1500 N�m / 1000 lbf�ft when ordered with new unit
250-2500 N�m 1" sq. dr.
50650.xxx
250-2500 lbf�ft 1" sq. dr.
50641.xxx
350-3500 N�m 1" sq. dr.
Suitable for HT12 and PT12
50645.xxx
2000-20000 N�m 2½" sq. dr.
50654.xxx
1500-15000 lbf�ft 2½" sq. dr.
50764.xxx
3500-35000 N�m 2½" sq. dr.
50765.xxx
2500-25000 lbf�ft 2½" sq. dr.
Suitable for HT13 and PT13
50646.xxx
5000-50000 N�m 2½" sq. dr.
Suitable for PT14
50647.xxx
10000-100000 N�m 3½" sq. dr.
Suitable for HT5 and PT5
50700.xxx
350-3500 N�m 1½" sq.dr.
TD4.CCW
Suitable for HT6 and PT6
50643.xxx
500-5000 N�m 1½" sq. dr.
50652.xxx
500-5000 lbf�ft 1½" sq. dr.
[email protected]
ANNULAR TRANSDUCERS FOR
STANDARD SERIES GEARBOX
Suitable for HT9 and PT9
50644.xxx
1000-10000 N�m 1½" sq. dr.
100-1000 lbf�ft ¾" sq. dr.
Suitable for heavy duty HT2, PT1, PT1A and PT2
50639.xxx
150-1500 N�m 1" sq. dr.
50649.xxx
4
-
Alternative calibration direction for transducers from 1501
N�m to 7000 N�m / 1001 lbf�ft to 5000 lbf�ft when ordered
with new unit
Alternative calibration direction for tranducers from 7001
N�m to 100000 N�m / 5001 lbf�ft to 75000 lbf�ft when
ordered with new unit
30000-300000 N�m
Suitable for PT18.MTS
Standard Calibration is performed loading counter clockwise only.
@
KAS accredited calibration up to 6000 N�m. A non accredited value
U
at 7000 N�m is extrapolated and provided
T +44 (0)1295 753 600 | F +44 (0)1295 753 609 | E [email protected] | www.norbar.com
49
TRANSDUCERS
ANNULAR
TRANSDUCERS
TOOL
NAME
(continued)
TOOL NAME
Torque and Angle Annular Transducer Note:
• 5000 N .m and above include dowels on both mounting faces.
• Angle resolution < 1° when used with T-Box XL™.
• CW+CCW calibration is standard.
•U
se 60308.xxx series lead for direct connection to T-Box XL™ for
torque and angle/turns monitoring and storage.
•P
T square drive and other parts may require removal to fit transducer.
Fixed Connector
4
180° Swivel Connector
TORQUE & ANGLE ANNULAR TRANSDUCERS
Suitable for heavy duty PT1, PT1A and PT2
50820.LOGA* 100-1000 N�m ¾" sq. dr.
Fixed Connector
50821.LOGA*+ 150-1500 N�m 1" sq. dr.
Fixed Connector
Can only be used with remote/plain sleeve motors i.e. not a standard PT handle,
due to cable interference
+
Only fits to PT with HD final stage carrier having 1" female sq. dr.
*
Suitable for HT5 and PT5
50822.LOGA 350-3500 N�m 1" sq. dr.
Fixed Connector
Suitable for HT7 and PT7
50823.LOGA 500-5000 N�m 1½" sq. dr.
180° Swivel Connector
Suitable for HT9 and PT9
50824.LOGA 1000-10000 N�m 1½" sq. dr.
180° Swivel Connector
Suitable for HT11 and PT11
[email protected] 2000-20000 N�m 2½" sq. dr.
180° Swivel Connector
@
Special reaction mount
• '.INDA' versions are available on request.
Note: PTs and reactions with dowel holes can be supplied at an extra
cost on request.
4
ANNULAR TRANSDUCERS
SECCAL.CW
Secondary Calibration in one direction on annular
transducers for HT/PT9 & HT/PT11 to extend
the range below 10% of the rated capacity, when
ordered with new unit
SECCAL.CW+CCW Secondary Calibration in two directions on
annular transducers for HT/PT9 & HT/PT11 to
extend the range below 10% of the rated capacity,
when ordered with new unit
If ordering a static, annular or rotary transducer you will
also require a corresponding lead (see list below).
To comply with the latest calibration standards, most new
transducer leads will have a suffix to indicate the length in
centimetres.
4
TRANSDUCER LEADS
Suitable for HT12 and PT12
50826.LOGA 3500-35000 N�m 2½" sq. dr.
180° Swivel Connector
60216.200
Suitable for HT13 and PT13
50827.LOGA 5000-50000 N�m 2½" sq. dr.
180° Swivel Connector
60223.200
PRO-LOG, TST, TTT & T-Box XL™ to 10 Way
Transducer for use with Norbar Rotary Transducers
PRO-LOG, TST, TTT & T-Box XL™ to 6 Way Transducer
for use with Norbar Static & Annular Transducers
PRO-LOG, TST, TTT & T-Box XL™ to no connector
60224.200
10 Way Transducer to no connector
60225.200
6 Way Transducer to no connector
Suitable for HT14 and PT14
50828.LOGA 10000-100000 N�m 3½" sq. dr.
180° Swivel Connector
51067.225
ETS to Transducer (Pre 1994) + 5 way (60055)
60152.225
ETS to Transducer (Post 1994) + 5 way (60163)
PT13 & PT14 require special front cover plate with added dowel clearance holes
Suitable for HT15 and PT15
50832.LOGA 15000-150000 N�m 4½" sq. dr.
180° Swivel Connector
Suitable for HT16 and PT16
50829.LOGA 20000-200000 N�m 5" sq. dr.
180° Swivel Connector
Suitable for HT17 and PT17
50830.LOGA 25000-250000 N�m 6" sq. dr.
180° Swivel Connector
Suitable for HT18 and PT18
50831.LOGA 30000-300000 N�m 6" sq. dr.
180° Swivel Connector
50
•A
ll the above are standard construction. Harsh Environment models
are available on request.
Norbar Product
Listand
2016
Catalogue
Price List 2016
60217.200
60308.400
PRO-LOG, TST, TTT & T-Box XL™ to
Torque & Angle Annular Transducers
60308.600
PRO-LOG, TST, TTT & T-Box XL™ to
Torque & Angle Annular Transducers
60308.1000 PRO-LOG, TST, TTT & T-Box XL™ to
Torque & Angle Annular Transducers
Note: The system should be calibrated with the increased length lead, as
calibration may be effected.
Note: The maximum permissible cable length is 15m for TST or TTT,
7m for T-Box XL™. Contact Norbar for further details.
LOADERS & ATTACHMENTS
LOADERS & ATTACHMENTS
TOOL NAME
These products allow torque wrenches to be calibrated
or tested in accordance with ISO 6789:2003 and BS EN
26789:2003. Their function is to take full advantage of the
accuracy of Norbar's torque measuring systems by reducing
operator induced variations in the calibration process.
The design of the TWL1500 includes features that will
provide an accurate and cost effective method for the
calibration or testing of torque wrenches.
Designed to suit the majority of torque wrenches available
with a torque value between 1 and 1500 N�m, the TWL1500
has been manufactured using quality materials that will
provide many years of continuous, trouble-free operation.
The most significant feature of the TWL1500 is its
compatibility with our wide range of Flange Mounted
and Pro-Test transducers. All fixtures, fastener kits and
instructions are supplied allowing for complete flexibility and
functionality.
4
TORQUE WRENCH LOADERS
60300
Loader with 90° rotation, ISO 1500 N�m
Longer Reaction Bar for obsolete version ISO 1500
(Part No. 60118)
60299
TWL 1500 shown with
Flange Mounted Transducers,
TTT and Model 1000 torque
wrench.
(Not included)
4
TORQUE WRENCH LOADER
60246
TWL 1500 Torque Wrench Loader
Note: TWL 1500 comes with mounting blocks for FMT, Pro-Test
and STB (old style TWA) transducers.
60193
Motorised ISO 1500 N�m
60194
Kit to motorise a 60118 or 60300 (ISO 1500)
20606
Reaction Plate for small Torque Wrenches
60237
Motorised Torque wrench loader Lead to TTT or TST
Note: 60237 is required when converting a pre 2003 motorised loader
from ETS display to TTT or TST display system.
20505
Loader, ISO 3000 N�m
20506
Motorised ISO 3000 N�m
T +44 (0)1295 753 600 | F +44 (0)1295 753 609 | E [email protected] | www.norbar.com
51
TEST FIXTURES
TOOLFIXTURES
LOADERS
TEST
NAME
AND ATTACHMENTS
TOOL NAME
The Norbar Joint Simulation Rundown Assemblies are designed to simulate the working conditions of screwed or bolted joints.
Used in conjunction with a Norbar transducer and display instrument, the output of torque controlled power tools can be
measured against a range of simulated joint rates, from hard through to soft.
4
JOINT SIMULATION RUNDOWN ASSEMBLIES
50313
0.2-2 N�m (2-20 Ibf�in)
50251
2-10 N�m (20-100 lbf�in)
50252
5-50 N�m (5-50 lbf�ft)
50253
50254
10-100 N�m (10-100 lbf�ft)
*
100-500 N�m (100-500 lbf�ft)
The above are for use with Norbar static square to square transducers
and bench stands.
*
To be used with large frame size bench stands, all others to be used
with small frame bench stands.
4
50175
WASHER STACKS FOR JOINT SIMULATION
RUNDOWN ASSEMBLIES
0.2-0.7 N�m Stack A for use with 50313
50176
0.5-1.4 N�m Stack B for use with 50313
50177
1.2-2.8 N�m Stack C for use with 50313
50178
2-6 N�m Stack D for use with 50251
50179
6-12 N�m Stack E for use with 50251
50695
5-30 N�m Stack A for use with 50252
50696
20-50 N�m Stack B for use with 50252
50697
50-70 N�m Stack C for use with 50252
50180
10-50 N�m Stack F for use with 50253 and 50693
50693
10-140 N�m (10-100 lbf�ft)
50192
30-100 N�m Stack G for use with 50253 and 50693
50694
100-700 N�m (70-500 lbf�ft)
50698
80-140 N�m Stack H for use with 50253 and 50693
The above are for use with the Norbar STB1000.
Shown with 1½" M/F Static Transducer (not included)
Shown with TruCheck™ Plus 1000 (not included)
4
4
ET/PT POWER TOOL TEST RIG
50757
POWER TOOL TEST FIXTURE FOR TRUCHECK™ PLUS
1000 AND 2000
Power Tool Test Fixture for TruCheck™ Plus 1000
50800
50774
Power Tool Test Fixture for TruCheck™ Plus 2000
50803
50758
1000 N�m Joint Simulator Rundown Assembly
7000 N�m ET, PT Power Tool Test Rig
(supplied with ¾", 1" and 1½" sq. dr. adaptors)
7000 N�m ET, PT Power Tool Test Rig without Reaction Plates
(supplied with ¾", 1" and 1½" sq. dr. adaptors)
50775
2000 N�m Joint Simulator Rundown Assembly
Note: The static transducer 50669.LOG does not come supplied as
standard with the tool test rig. The standard range of 700 - 7000 N .m will
not cover the full powered multiplier range, additional calibration may be
required, please see below:
Norbar Product List 2016
ADDCALPOINTS.NEW
Additional calibration steps below 10% of rated capacity to 2% for
transducers up to 7000 N�m (5000 lbf�ft) when ordered with new unit
52
Norbar Product
Listand
2016
Catalogue
Price List 2016
TEST FIXTURES
TEST FIXTURES
TOOL NAME
1½" M/F Static Transducer required (not included)
4
50801
50804
7000 N.m UNIVERSAL TOOL TEST RIGS
Universal 7000 N .m ET, PT & Hydraulic Tool Test Rig
(supplied with ¾", 1" and 1½" sq. dr. adaptors)
Universal 7000 N .m ET, PT & Hydraulic Tool Test Rig without
Reaction Plates (supplied with ¾", 1" and 1½" sq. dr. adaptors)
4
REACTION PLATES FOR USE WITH 50803 & 50804
81024
Suitable for ET/PTM 119, PT 4500 and PT 5500
81025
Suitable for ET/PTM 92
81026
Suitable for ET/PT/PTM 72
81027
Suitable for PTM 52
81028
Suitable for PT 2700
81029
Suitable for PT 1, PT 1A and PT 2
81030
Suitable for PT 5 and PT 6
81031
Suitable for PT 7
81032
Blank Reaction Plate for Universal Test Rigs
Universal Hydraulic Tool Test Rig
with Reaction Plates (50801)
4
SPARES FOR 50800, 50801, 50803 & 50804
50800.29 2" AF Socket 1½" sq. dr.
50800.28 2" AF Socket 1" sq. dr.
50800.27 2" AF Socket ¾" sq. dr.
50800.26 Special 2" UNC Bolt
50800.25 Type B UNC High Tensile 2" UNC Nut
50548.4
Washer Stack Kit 100 - 7000 N�m
(Also for use with RD5000)
See page 54 for accessories for use with Hydraulic Tool Calibration Fixture
T +44 (0)1295 753 600 | F +44 (0)1295 753 609 | E [email protected] | www.norbar.com
53
HYDRAULIC TOOL CALIBRATION FIXTURES
HYDRAULIC
TOOL
TOOL
NAME
CALIBRATION FIXTURES
Norbar’s Hydraulic Tool Calibration Fixture is a robust
device that allows accurate testing of hydraulic torque
wrenches. A system comprises of a Calibration Fixture and
Transducer, also required is a torque measuring instrument
and transducer cable.
· Bearing support for transducer gives improved accuracy.
· Interchangeable stainless steel square and round reaction
posts.
· Hardened steel inserts to location reaction posts in two
positions: suits most hydraulic wrenches.
· Optimised material sections for robust but portable design.
· For hexagon link wrenches, a wide range of hexagon to
square adaptors are available.
TOOL NAME TOOL CALIBRATION FIXTURES
HYDRAULIC
Hydraulic Tool Calibration Fixture shown with Transducer
(Transducer not included)
4
CALIBRATION FIXTURES
80026
Hydraulic Calibration Fixture up to 7000 N�m
80022
Hydraulic Calibration Fixture up to 50000 N�m
80023
Hydraulic Calibration Fixture up to 80000 N�m
81022
Reaction Bar for 80026
81023
Reaction Bar for 80022
4
TRANSDUCERS FOR USE WITH 80026
50703.xxx *
250-2500 N�m 1½" sq. dr. M/F
50704.xxx *
250-2500 lbf�ft 1½" sq. dr. M/F
50599.xxx *
500-5000 N�m 1½" sq. dr. M/F
50630.xxx *
500-5000 lbf�ft 1½" sq. dr. M/F
50669.xxx *
700-7000 N�m 1½" sq. dr. M/F
4
TRANSDUCERS FOR USE WITH 80022
[email protected]
1000-10000 N�m 2½" sq. dr. M/F
[email protected]
1000-10000 lbf�ft 2½" sq. dr. M/F
[email protected]
5000-50000 N�m 2½" sq. dr. M/F
[email protected]
25000 lbf�ft 2½" sq. dr. M/F
4
TRANSDUCERS FOR USE WITH 80023
50782.xxx
6000-60000 lbf�ft 3½" sq. dr. M/F
50783.xxx
8000-80000 N�m 3½" sq. dr. M/F
Harsh Environment Transducers available on request.
9
DUAL CALIBRATION FIXTURE
80030
Dual Calibration Fixture
9
ADDITIONAL CALIBRATION
The transducers shown include clockwise only calibration from 10% to
100% of rated capacity. For other calibration options, see below:
*
ADDCALPOINTS.NEW
Additional calibration steps below 10% of rated capacity to 2% for
transducers up to 7000 N�m (5000 lbf�ft) when ordered with new unit
@
SECCAL.CW
Secondary Calibration in one direction on static transducers with 2.5"
square drives to extend the range below 10% of the rated capacity, when
ordered with new unit
SECCAL.CW+CCW
Secondary Calibration in two directions on static transducers with 2.5"
square drives to extend the range below 10% of the rated capacity, when
ordered with new unit
54
Norbar Product
Listand
2016
Catalogue
Price List 2016
HYDRAULIC TOOL CALIBRATION FIXTURES
TOOL NAME
Fixture shown with Hydraulic Torque Wrench
Hexagon to Square
4
29619.24
29619.27
29619.30
29619.32
29619.36
29619.41
29619.46
29619.50
29619.55
29619.60
29619.65
29619.70
29619.75
29619.80
29620.50
29620.55
29620.60
29620.65
29620.70
29620.75
29620.80
29620.85
29620.90
29620.95
29620.100
29620.105
29620.110
29620.115
29620.130
HEXAGON TO SQUARE ADAPTORS - METRIC
24mm Hex to 1½" Sq. (Max 3000 N�m)
27mm Hex to 1½" Sq. (Max 4000 N�m)
30mm Hex to 1½" Sq. (Max 4000 N�m)
32mm Hex to 1½" Sq. (Max 4900 N�m)
36mm Hex to 1½" Sq. (Max 7000 N�m)
41mm Hex to 1½" Sq. (Max 8700 N�m)
46mm Hex to 1½" Sq. (Max 8700 N�m)
50mm Hex to 1½" Sq. (Max 8700 N�m)
55mm Hex to 1½" Sq. (Max 8700 N�m)
60mm Hex to 1½" Sq. (Max 8700 N�m)
65mm Hex to 1½" Sq. (Max 8700 N�m)
70mm Hex to 1½" Sq. (Max 8700 N�m)
75mm Hex to 1½" Sq. (Max 8700 N�m)
80mm Hex to 1½" Sq. (Max 8700 N�m)
50mm Hex to 2½" Sq. (Max 18500 N�m)
55mm Hex to 2½" Sq. (Max 25000 N�m)
60mm Hex to 2½" Sq. (Max 32000 N�m)
65mm Hex to 2½" Sq. (Max 36000 N�m)
70mm Hex to 2½" Sq. (Max 36000 N�m)
75mm Hex to 2½" Sq. (Max 36000 N�m)
80mm Hex to 2½" Sq. (Max 59000 N�m)
85mm Hex to 2½" Sq. (Max 59000 N�m)
90mm Hex to 2½" Sq. (Max 59000 N�m)
95mm Hex to 2½" Sq. (Max 59000 N�m)
100mm Hex to 2½" Sq. (Max 52000 N�m)
105mm Hex to 2½" Sq. (Max 52000 N�m)
110mm Hex to 2½" Sq. (Max 52000 N�m)
115mm Hex to 2½" Sq. (Max 52000 N�m)
130mm Hex to 2½" Sq. (Max 52000 N�m)
Dual Calibration Fixture
Part No. 80030
4
29623.I20
29623.I23
29623.I26
29623.I29
29623.I32
29623.I35
29623.I38
29623.I41
29624.I35
29624.I38
29624.I41
29624.I44
29624.I47
29624.I50
29624.I56
29624.I62
29624.I68
29624.I74
29624.I80
29624.I86
29624.I98
HEXAGON TO SQUARE ADAPTORS IMPERIAL
1¼" Hex to 1½" Sq. (Max 4900 N�m)
17 �16" Hex to 1½" Sq. (Max 7000 N�m)
15 �8 " Hex to 1½" Sq. (Max 8700 N�m)
113 �16" Hex to 1½" Sq. (Max 8700 N�m)
2" Hex to 1½" Sq. (Max 8700 N�m)
2³�16" Hex to 1½" Sq. (Max 8700 N�m)
2 3 �8 " Hex to 1½" Sq. (Max 8700 N�m)
29 �16" Hex to 1½" Sq. (Max 8700 N�m)
2³�16" Hex to 2½" Sq. (Max 25000 N�m)
2 3 �8 " Hex to 2½" Sq. (Max 32000 N�m)
29 �16" Hex to 2½" Sq. (Max 36000 N�m)
2 3 � 4" Hex to 2½" Sq. (Max 36000 N�m)
215 �16" Hex to 2½" Sq. (Max 36000 N�m)
31 �8 " Hex to 2½" Sq. (Max 59000 N�m)
3½" Hex to 2½" Sq. (Max 59000 N�m)
37 �8 " Hex to 2½" Sq. (Max 52000 N�m)
4¼" Hex to 2½" Sq. (Max 52000 N�m)
4 5 �8 " Hex to 2½" Sq. (Max 52000 N�m)
5" Hex to 2½" Sq. (Max 52000 N�m)
53 �8 " Hex to 2½" Sq. (Max 52000 N�m)
61 �8 " Hex to 2½" Sq. (Max 52000 N�m)
4
SLEEVE ADAPTORS
86034.4
Adaptor 1½" Male sq. ¾" Female sq.
21214
Adaptor 1½" Male sq. 1" Female sq.
29617
Adaptor 2½" Male sq. 1½" Female sq.
29618
Adaptor 3½" Male sq. 2½" Female sq.
Special ‘Engineer to Order’ hexagon and square adaptors available on
request.
Sleeve Adaptor
T +44 (0)1295 753 600 | F +44 (0)1295 753 609 | E [email protected] | www.norbar.com
55
HARSH ENVIRONMENT HE RANGE
HARSH
TOOL
NAME ENVIRONMENT
INSTRUMENTS
HARSH
ENVIRONMENT
TOOL
NAME
INSTRUMENT
Norbar have worked closely with the oil and gas industry
to produce a range of torque instruments and transducers
suitable for use in the harshest environments such as ship
decks, oil rigs and refineries. Norbar uses a variety of
corrosion resistant materials, high specification connectors
and sealing techniques meaning that products in our HE
range can be used in such environments without impairing
their performance or life span. Although originally designed
to meet the needs of the oil and gas industry, Norbar’s HE
range is the ideal choice whenever it is necessary to apply
or measure torque outdoors in potentially wet or dusty
conditions.
Harsh Environment Instrument
Harsh Environment Transducers
Intervention Tool Test Pots
TTL-HE Instrument And Transducer Kits
Intervention Tool Verification Kits
Multipliers For Subsea
Engineer To Order
56
57
58
58
58
59
59
TTL-HE is a portable torque measuring instrument designed
for use in harsh environments. The TTL-HE operating on
battery power with one of the ‘HE’ range of transducers
connected, has an ingress protection rating of IP65/IP67.
Typical operating environments are where high humidity,
water or salt water spray and dust may be an issue. Features
include; 10 measurement modes, 13 units of torque (with
additional USER units feature), 12 pairs of limits and text
displayed in 11 languages.
•IP65/67 rated
•Bi-directional calibration
•Battery power use in harsh environments (mains supply for
charging)
•All features are in common with TST and TTT instruments
•Supplied in IP67 rated carry case
•Please contact Norbar for full details of available transducers
4
HARSH ENVIRONMENT RANGE
43217
TTL-HE Instrument (inc. IP67 rated carry case)
Supplied with clock and counter-clockwise calibration
56
Norbar Product
Listand
2016
Catalogue
Price List 2016
HARSH ENVIRONMENT HE RANGE
HARSH ENVIRONMENT TRANSDUCERS
TOOL NAME
The accuracy and quality of the Norbar Torque Transducers has made them the first choice of many calibration laboratories
throughout the world. The Harsh Environment Range of Transducers has been specifically designed for use with the Norbar
TTL-HE Instrument.
4
STATIC TRANSDUCERS
4
ANNULAR TRANSDUCERS
50787.xxx
300-3000 N�m 1½" M/F sq. dr.
50767.xxx
100 - 1000 N�m including drive shaft
50751.xxx *
300-3000 N�m 1½" M/M sq. dr.
50745.xxx
350 - 3500 N�m including drive shaft
50705.xxx
500-5000 N�m 1½" M/F sq. dr.
50725.xxx
1000 - 10000 N�m no drive shaft
50729.xxx *
500-5000 N�m 1½" M/M sq. dr.
50706.xxx
500-5000 Ibf�ft 1½" M/F sq. dr.
50728.xxx
1000-10000 N�m 2½" M/F sq. dr.
50788.xxx
1000-10000 N�m 2½" M/ 2" M sq. dr.
50789.xxx
1500-15000 N�m 2½" M/ 2 5 �8 " M sq. dr.
50726.xxx
2500-25000 N�m 3½" M/M sq. dr.
50727.xxx
4000-40000 N�m 3½" M/M sq. dr.
50743.xxx+
10000-100000 lbf�ft 3½" M/M sq. dr.
Suitable for use in Hydraulic Test Pots.
+
UKAS accredited calibration up to 80000 lbf�ft. A non accredited value at
100000 lbf�ft is extrapolated and provided for reference only.
Static Transducers 3000 N�m and above supplied in carry case.
*
Other transducers available upon request.
All above HE transducers supplied with clockwise and counter clockwise
calibration.
Designed for use with the Harsh Environment Instrument range
(TTL-HE) of products
4
INSTRUMENTATION LEADS
60245.200
TTL-HE to HE Transducer
60250.200
TTL-HE to Norbar Static & Annular Transducers
60263.200
TTL-HE to Rotary Transducers
60266.200
HE Transducer to TTT, TST and T-Box XL™
60261.200
Serial Data Lead for TTL-HE
Note: The system should be calibrated with the increased length lead, as
calibration may be affected.
Note: The maximum permissible cable length 15m for Transducer Leads, 7m
if using 60266 with a T-Box XL™. Contact Norbar for further details.
T +44 (0)1295 753 600 | F +44 (0)1295 753 609 | E [email protected] | www.norbar.com
57
HARSH ENVIRONMENT HE RANGE
INTERVENTION
TOOL
TOOL
NAME
TEST POTS
TOOL NAME
INTERVENTION
TOOL VERIFICATION KITS
Each kit comprises a test pot, an instrument, a transducer
and a transducer lead in a water tight carry case.
These reaction pots allow for the accurate testing of API
rotary intervention tools.
• Conform to ISO13628-8:2002 and API 170 First Edition
• Customer specific solutions also available
• Lightweight all aluminium construction
• Incorporated lifting handles
• Eye bolts provided on larger units
4
INTERVENTION TOOL TEST POTS
80019
80020
ISO13628-8:2002
Class 4 Intervention Tool Test Pot
ISO13628-8:2002
Class 5 Intervention Tool Test Pot
ISO13628-8:2002
Class 6 Intervention Tool Test Pot
API 170 First Edition Intervention Tool Test Pot
81018
Deck Mount Kit for API Verification Pot
80024
80025
TTL-HE INSTRUMENT AND TRANSDUCER
KITS
4
60287.LOG
TTL-HE INSTRUMENT AND
TRANSDUCER KITS
5000 N�m M/M TTL-HE Kit, inc. Lead (Class 4)
60295.LOG
10000 N�m M/M TTL-HE Kit, inc. Lead(Class 5)
60296.LOG
15000 N�m M/M TTL-HE Kit, inc. Lead(Class 6)
60289.LOG
40000 N�m M/M TTL-HE Kit, inc. Lead (Class 7)
4
INTERVENTION TOOL TORQUE VERIFICATION KIT
60278.xxx
3000 N�m ISO13628 Class 4 Intervention Tool Torque
Verification Kit
60281.xxx
10000 N�m ISO13628 Class 5 Intervention Tool Torque
Verification Kit
60282.xxx
15000 N�m ISO13628 Class 6 Intervention Tool Torque
Verification Kit
60279.xxx
25000 N�m API 170 Class 7 (short) Intervention Tool Test
Kit
60280.xxx
40000 N�m API 170 Class 7 (short) Intervention Tool Test
Kit
Other Test Pots and Torque Verification Kits are available for standard
and non standard API Intervention tool test and verification.
Please contact Norbar.
Note: Kits for use with Intervention Tool Test Pots
Wet Pipe Clamp Tool under test
58
Norbar Product
Listand
2016
Catalogue
Price List 2016
HARSH ENVIRONMENT HE RANGE
MULTIPLIERS FOR SUBSEA
4
TOOL NAME
77331
MULTIPLIERS FOR INTEGRATION INTO SUB SEA
INTERVENTION TOOLS
HT5 5:1 for Sub Sea Intervention Tools
77301
HT5 5:1 for Sub Sea Splined Output
Valve Testing Kit
As above but supplied with transducer with an accuracy of ±2%.
4
MULTIPLIERS WITH INTEGRATED TRANSDUCER
77141.IND
HT5 5:1 with Integrated Transducer
350 - 3500 N�m
77142.MAO2 HT5 5:1 with Integrated Transducer 4 - 20 mA 2 wire
350 - 3500 N�m
Pipe Clamp Actuation Tool
ENGINEER TO ORDER
Norbar's wide range of standard equipment notwithstanding,
there are applications when something special is required.
As an ISO9001 accredited company, Norbar will undertake
the design and manufacture of special equipment against
agreed customer specifications.
These projects range from modified torque wrench end
fittings to complete torque and angle control of valve testing
kits. Relevant European safety directives are applied where
appropriate, leading to well engineered reliable products that
are designed to make tasks safer and easier.
Remote Operated
Torque & Angle Kits
Subsea Torque Multipliers
(Class 4-6/7 shown)
For more information on Norbar's Engineer to Order
service please e-mail your enquiry to [email protected] or
visit the Engineer to Order section of the Norbar website
at: www.norbar.com/en-gb/Services/Engineer-to-Order
T +44 (0)1295 753 600 | F +44 (0)1295 753 609 | E [email protected] | www.norbar.com
59
ULTRASONIC MEASUREMENT
ULTRASONIC
TOOL
NAME
MEASUREMENT
As design engineers push the boundaries to provide greater
strength and efficiency in bolted joints, the use of torque,
torque and angle, or even tensioning as the method of
tension control may not be adequate, leading to costly
failures. In those applications, ultrasonic bolt elongation/load
measurement is able to provide accuracy equal to strain
gauging without the need to strain gauge a bolt. In addition,
the use of ultrasonic bolt measurement allows the user to
return at any time and re-verify the level of tension in each
fastener over its service life. The USM-3 has been both
laboratory and field-proven to be the most accurate, reliable
and cost effective solution to bolting failures which could
place workers at risk, lead to the loss of production and/or
cause damage to capital equipment.
TOOL NAME
USM
ABOUT USM-3
The basic principle behind this method of tension control is similar
to sonar. The ultrasonic measurement of bolt tension is achieved by
introducing a sonic pulse at one end of the fastener and accurately
measuring the time of flight (TOF) required for the echo to return
from the opposite end. Using material constants, the USM-3 converts
this TOF into an “acoustic length" of the fastener, providing a baseline
from which future measurements will be made. When the fastener
is tightened: the TOF increases and the USM-3 will again utilise
material constants to eliminate the effects of stress and temperature
variations on sound velocity, providing an accurate elongation or
load measurement.
The USM-3 uses state of the art hardware and digital signal processing
to achieve these measurements with maximum automation, minimizing
the need for operator interpretation. Once measurements have been
recorded to the USM-3 internal memory, the included SonicBolt
software will transfer the data to a computer for backup of files,
creation of project reports, and conversion of data to Excel format for
further analysis. In addition, the analogue signal output can be used to
automatically shut-off powered torque and tensioning tools based on
elongation or load, in even the most demanding applications.
For more information visit www.norbar.com
Measured
Time Change
60
Norbar Product
Listand
2016
Catalogue
Price List 2016
Echo
Pulse
Echo
Time of Flight
UNTIGHTENED
Pulse
Ultrasonic Transducer
Time of Flight
TIGHTENED
ULTRASONIC MEASUREMENT
TOOL NAME
Ultrasonic measurement provides a very precise method of
determining the elongation of a fastener due to tightening. This
elongation is proportional to the load force generated by the
fastener.
9
USM-3 ULTRASONIC STRESS METER
40334
USM-3 instrument with AC adaptor, nylon case, storage case,
transducer cable, RS232 cable, couplant and manual
Magnetic Transducers - This standard style is used with ferrous materials,
and consists of a rare earth magnet surrounding the piezo electric
transducer.
9
TRANSDUCERS
56016
3
�16" 5 MHz Magnetic Transducer
56017
3
�16" 7.5 MHz Magnetic Transducer
56018
3
�16" 10 MHz Magnetic Transducer
56009
¼" 5 MHz Magnetic Transducer
56019
¼" 10 MHz Magnetic Transducer
56011
½" 2.25 MHz Magnetic Transducer
56010
½" 5 MHz Magnetic Transducer
56020
¾" 1 MHz Magnetic Transducer
56013
¾" 2.25 MHz Magnetic Transducer
56012
¾" 5 MHz Magnetic Transducer
56021
Glue on, 3mm square, 7.5 MHz, pack of 100
Operating temperature limit for transducers is 55ºC. Contact Norbar
for details of high temperature transducers with a temperature limit of
175ºC.
9
TRANSDUCER LEADS
60235
Transducer Lead 10’ (approx 3m)
60236
Transducer Lead 20’ (approx 6m)
56023
Probe for glue on Ultrasonic TD's
9
SPARES & ACCESSORIES
61112
Ultrasonic Couplant Bottle 4oz (approx 0.12 litres)
61116
Serial Lead 6’ DB9 M to DB9 F
61117
Length Bar Set 3" & 6" with certificate
60271
Digital Thermometer (Accuracy ±0.5ºC / ±1ºF)
T +44 (0)1295 753 600 | F +44 (0)1295 753 609 | E [email protected] | www.norbar.com
61
CALIBRATION BEAMS & WEIGHTS
CALIBRATION
TOOL
NAME
BEAMS & WEIGHTS
TOOL NAME BEAMS & WEIGHTS
CALIBRATION
Designed to remove potential sources of measurement
error, these beams can be used to calibrate Norbar
torque transducers, and torque transducers from other
manufacturers (where design permits), as well as mechanical
test devices. UKAS length certification is provided with
each beam. Note: A temperature controlled environment is
essential for use of these beams. The selection of weights
will be influenced by gravitational constant and air buoyancy
values at the proposed laboratory site.
9
NEWTON METRES SIZES
21400
100mm
Radius Disc
21429
0.5-60 N�m
Radius Ended Beam
21421
5-150 N�m
Radius Ended Beam
21427
10-500 N�m
Radius Ended Beam
21428
10-1500 N�m
Radius Ended Beam
21842
500-5000 N�m
Free Standing Beam
With the exception of 21842 all calibration beams are supplied in a protective
wooden box. A UKAS accredited calibration certificate for the measurement
of the torque radius is provided with each beam.
9
WEIGHTS FOR THE DISC 21400
21452.NAM
Weight set to give 0.5 N�m
21450.NAM
Weight set to give 1.0 N�m
21479.NAM
Weight set to give 2.5 N�m
9
WEIGHTS FOR THE BEAM 21429
21476.NAM
Weight set to give 5 N�m
21454.NAM
Weight set to give 10 N�m
21458.NAM
Weight set to give 50 N�m
Q2343.NAM Weight set to give 60 N�m
9
WEIGHTS FOR THE BEAM 21421
21477.NAM
Weight set to give 50 N�m
21458.NAM
Weight set to give 100 N�m
9
WEIGHTS FOR THE BEAM 21427/21428
21459.NAM
Weight set to give 250/500 N�m
Q2344.NAM Weight set to give 400 N�m
21460.NAM Weight set to give 500/1000 N�m
21483.NAM
Weight set to give 500/1000 & 1500 N�m
e.g. set 21459.NAM will give 250 N�m on a 21427 beam and 500 N�m on a 21428.
9
WEIGHTS FOR THE BEAM 21842
21469.NAM
Weight set to give 5000 N�m
All weight sets come with traceable UKAS accredited calibration certificate.
This requires the customer to provide the value for "g" (local gravity) for the
intended place of use when ordering.
62
Norbar Product
Listand
2016
Catalogue
Price List 2016
CALIBRATION BEAMS & WEIGHTS
TOOL NAME
Calibration Disc with weight sets
9
IMPERIAL - POUNDS FEET SIZES
9
ANCILLARY PRODUCTS FOR CALIBRATION BEAMS
21430
21424
10-500 lbf�in
10-100 lbf�ft
Radius Ended Beam
Radius Ended Beam
80000
Pedestal for mounting calibration equipment
80005
Adjustable Angle Attachment
21425
50-500 lbf�ft
Radius Ended Beam
21221
Adaptor STM Calibration ½"
21426
100-1000 lbf�ft
Radius Ended Beam
21842
500-5000 lbf�ft
Free Standing Beam
9
CALIBRATION FIXTURES
J2239
Transducer calibration fixture ¼" sq
J2237
Transducer calibration fixture 3 �8 " sq
J2244
Transducer calibration fixture ½" sq
J2240
Transducer calibration fixture ¾" sq
J2241
Transducer calibration fixture 1" sq
J3305
3° Angled Plate for use with J2241
With the exception of 21842 all calibration beams are supplied in a
protective wooden box. A UKAS accredited calibration certificate for the
measurement of the torque radius is provided with each beam.
9
WEIGHTS FOR THE DISC 21400
21455.NAM
Weight set to give 50 ozf�in
21453.NAM
Weight set to give 100 ozf�in
21451.NAM
Weight set to give 160 ozf�in
9
WEIGHTS FOR THE BEAM 21430
All weight sets come with a traceable UKAS accredited calibration
certificate. This requires the customer to provide the value for "g" (local
gravity) for the intended place of use when ordering.
21465.NAM Weight set to give 100 lbf�in
21466.NAM Weight set to give 500 lbf�in
9
WEIGHTS FOR THE BEAM 21424
21467.NAM
Weight set to give 100 lbf�ft.
9
WEIGHTS FOR THE BEAM 21425
21468.NAM Weight set to give 500 lbf�ft
9
WEIGHTS FOR THE BEAM 21426
21468.NAM Weight set to give 1000 lbf�ft
9
WEIGHTS FOR THE BEAM 21842
21469.NAM
Weight set to give 5000 lbf�ft
All weight sets come with a traceable UKAS accredited calibration
certificate. This requires the customer to provide the value for "g" (local
gravity) for the intended place of use when ordering.
T +44 (0)1295 753 600 | F +44 (0)1295 753 609 | E [email protected] | www.norbar.com
63
SPARES KITS / SERVICE REPLACEMENT POLICY
SPARES KITS
In order to maintain the quality, performance and peace of
mind associated with their products Norbar recommend that
only genuine Norbar spares are fitted to their products.
SERVICE
REPLACEMENT POLICY
Our aim is to give you the fastest possible service when
you send in a wrench for repair. Therefore, our policy is
that all wrenches of up to 400 N�m and ‘Industrial’ torque
wrenches sent in for repair will be exchanged for a ‘Service
Replacement’ tool. This policy may be extended, at our
discretion, to wrenches from other manufacturers sent to
Norbar for repair/replacement. A ‘Service Replacement’
tool is manufactured from new parts, carries a twelve month
warranty and is supplied with a calibration certificate.
The Part Number for ordering purposes is the same as the
new torque wrench, followed by the letter ‘R’, eg. 13001R.
Professional models with a capacity above 400 N�m will
be repaired on a parts plus labour basis unless the service
replacement cost would be lower.
SPARES KITS
8
TORQUE SCREWDRIVER
13593.001NM
TTs Handle Repair Kit for 1.5 N�m Tool
13593.003NM
TTs Handle Repair Kit for 3.0 N�m Tool
13593.006NM
TTs Handle Repair Kit for 6.0 N�m Tool
13593.013LBI
TTs Handle Repair Kit for 13 lbf�in Tool
13593.026LBI
TTs Handle Repair Kit for 26 lbf�in Tool
13593.053LBI
TTs Handle Repair Kit for 53 lbf�in Tool
13593.P
TTs Handle Repair Kit for P Type Tool
13594
TTs Adjusting Screw & Retention Clip Repair Kit
13595
TTs Body Tube & Cam Assyembly Repair Kit
13596
TTs End Knob Assembly Repair Kit
13597
TTs ¼" Blade Repair Kit
13609
TTs P Type Locking Knob Repair Kit
8
TT WRENCHES UP TO 50 N�m/35 lbf�ft
13425
¼" Ratchet Repair Kit, Mdl 20 N�m, 180 lbf�in
13426
�8 " Ratchet Repair Kit, Mdl 20 N�m, 180 lbf�in, 50 N�m,
35 lbf�ft
½" Ratchet Repair Kit, Mdl 50 N�m, 35 lbf�ft
13427
3
13636.020NLF Handle Repair Kit, 20 N�m/lbf�in Scale
13636.020NM Handle Repair Kit, 20 N�m Scale
13636.180LBI
Handle Repair Kit, 180 lbf�in Scale
13636.050NLF Handle Repair Kit, 50 N�m/lbf�ft Scale
13636.050NM Handle Repair Kit, 50 N�m Scale
13636.035LBF
Handle Repair Kit, 35 lbf�ft Scale
13417
Adjusting Knob Repair Kit
13637
Thrust Washer Repair Kit
11762
Rivet Repair Kit
8
13410.100NLF
TT WRENCHES 100 N�m/75 lbf�ft TO 300 N�m/250
lbf�ft
Handle Repair Kit, 100 N�m/lbf�ft Scale
13410.100NM
Handle Repair Kit, 100 N�m Scale
13410.075LBF
Handle Repair Kit, 75 lbf�ft Scale
13410.150NLF
Handle Repair Kit, 150 N�m/lbf�ft Scale
13410.150NM
Handle Repair Kit, 150 N�m Scale
13410.110LBF
Handle Repair Kit, 110 lbf�ft Scale
13410.200NLF
Handle Repair Kit, 200 N�m/lbf�ft Scale
13410.200NM
Handle Repair Kit, 200 N�m Scale
13410.150LBF
Handle Repair Kit, 150 lbf�ft Scale
13410.250NLF
Handle Repair Kit, 250 N�m/lbf�ft Scale
13410.250NM
Handle Repair Kit, 250 N�m Scale
13410.185LBF
Handle Repair Kit, 185 lbf�ft Scale
13410.300NLF Handle Repair Kit, 300 N�m/lbf�ft Scale
13410.300NM Handle Repair Kit, 300 N�m Scale
64
Norbar Product List 2016
13410.220LBF
Handle Repair Kit, 220 lbf�ft Scale
13410.250LBF
Handle Repair Kit, 250 lbf�ft Scale
8
13411
TT WRENCHES 100 N�m/75 lbf�ft TO 300 N�m/250
lbf�ft
Adjusting Knob Repair Kit
13415
Thrust Washer Repair Kit
13414
Rivet Repair Kit
SPARES KITS
8
TTi WRENCHES
13693
TTi20 ¼" Ratchet Lever Arm Assemblies
13694
TTi20 3 �8 " Ratchet Lever Arm Assemblies
13690
TTi50 3 �8 " Ratchet Lever Arm Assemblies
13691
TTi50 ½" Ratchet Lever Arm Assemblies
13212
Ratchet Repair Kit, 3 �8 " sq. dr. 60/100
13214
Ratchet Repair Kit, ½" sq. dr. 200
13215
13491
Ratchet Repair Kit, ½" sq. dr. Mdl 250/300 N�m,
185/220 lbf�ft
Ratchet Replacement Kit , 3 �8 " sq. dr. 60/100
150112.K
'Industrial Ratchet' Repair Kit, 3 �8 " sq. dr. (Mdl 50)
13492
Ratchet Replacement Kit, ½" sq. dr. 50-200
254100.PK
SKT Grub M5 x 8 LG Oval Point - Pack of 50
150113.K
'Industrial Ratchet' Repair Kit, ½" sq. dr. (Mdl 100-200)
150114.K
'Industrial Ratchet' Repair Kit, ½" sq. dr. (Mdl 300-340)
150115.K
'Industrial Ratchet' Repair Kit, ¾" sq. dr. (Mdl 400)
11598
‘Automotive Ratchet’ Repair Kit 3 �8 " sq. dr. (Mdl 50 & 100)
13493
Heavy Duty Ratchet Replacement Kit, ½" sq. dr.
Mdl 250/300 N�m, 185/220 lbf�ft)
For Handle Repair Kits please see TT section to the left.
8
150100.K
PROFESSIONAL TORQUE WRENCHES
SPARES KITS
Handle Repair Kit
150101.K
Scale Mechanism Repair Kit
150102.K
Locking Knob Repair Kit
150103.K
Thrust Washer and Screw Kit
150104.K
Spring Repair Kit
150105.K
½" sq. dr. Mushroom Kit
150106.K
3
�8 " sq. dr. Mushroom Kit
8
TTftH WRENCHES
11618
‘Automotive Ratchet’ Repair Kit ½" sq. dr. (Mdl 50 & 100)
13695
TTfth20 9x12mm Female End Repair Kit
150111.K
'Automotive Ratchet 'Repair Kit, ½" sq. dr. (Mdl 200)
13692
TTfth50 9x12mm Female End Repair Kit
8
8
MODEL 5
13123
Spares Kit Model 5 Adjustable
10628.PK
PROFESSIONAL TORQUE WRENCHES
SPARES PACKS
Label TimeStrip - Pack of 50
13125
Spares Kit Model 5 ‘P’ Type
10640.PK
TimeStrip Adhesive Gasket - Pack of 50
13124
Calibration Kit Model 5 ‘P’ Type
11521.PK
Shaped Washer - Pack of 20
8
25497.PK
End Stop - Pack of 10
End Cap - Pack of 25
SCR:SKT Grub M5 x 5 LG Dog Point - Pack of 50
254100.PK
SCR:SKT Grub M5 x 8 LG Oval Point - Pack of 50
25746.PK
M3 Dog Point Grub SCR - Pack of 50
25938.PK
Washer M4 STD.Flat - Pack of 100
26033.PK
Pivot Pin - Pack of 20
27029.PK
Steel Ball 3.8mm Dia - Pack of 50
25351.10.PK
SHCS M4 x 10 LG - Pack of 50
13212
PROFESSIONAL TORQUE WRENCHES MODELS 60
- 400 (pre March 2015)
‘Automotive Ratchet’ Repair Kit 3 �8 " Beta
(Mdl 60 & 100)
‘Automotive Ratchet’ Repair Kit ½" Beta
(Mdl 60 & 100)
‘Automotive Ratchet’ Repair Kit ½" Rev Beta
(Mdl 200 & 300)
Push Through Beta 72 Tooth Repair Kit ½"
‘Industrial Ratchet’ Repair Kit 3 �8 " (Mdl 60/100)
11522.PK
15312.PK
13213
‘Industrial Ratchet’ Repair Kit ½" (Mdl 60/100)
8
13214
‘Industrial Ratchet’ Repair Kit ½" (Mdl 200)
13215
13190
‘Industrial Ratchet’ Repair Kit Mdl 300/330
½" for 13047, 13049 & 13057
‘Industrial Ratchet’ Repair Kit Mdl 400 ¾"
for 13050 & 13056
Mdl 400 ¾" sq. dr.
CLICKTRONIC TORQUE WRENCHES
SPARES KITS
Spring Repair Kit
13235
11598
11618
11622
11623
150104.K
150105.K
½" sq. dr. Mushroom Kit
150106.K
3
150107.K
Adjusting Screw and Wiper Kit
150108.K
Locking Knob Kit
Sq. Dr. Repair Kit �8 " (Mdl 60/100)
150109.K
Lower Handle Kit
13236
Sq. Dr. Repair Kit ½" (Mdl 60/100)
150110.K
Complete Handle Kit
13237
Sq. Dr. Repair Kit ½" Mdl 200/300/330
11824
Spares Kit Mdl 60 Handle (pre 1st Jan 2001)
8
11825
Spares Kit Mdl 100 Handle (pre 1st Jan 2001)
11826
Spares Kit Mdl 200 Handle (pre 1st Jan 2001)
15524.PK
CLICKTRONIC TORQUE WRENCHES
SPARES PACKS
USB Bung - Pack of 5
11827
Spares Kit Mdl 300 Handle (pre 1st Jan 2001)
39721.PK
Wiper 1-3 N - Pack of 5
11828
Spares Kit Mdl 330 Handle (pre 1st Jan 2001)
25742.PK
M2.5 x 12 LG Torx Pan Screw - Pack of 80
13157
Spares Kit Prof. Handle (Post 1st Jan 2001)
25743.PK
M4 x 8 LG Torx CSK Screw - Pack of 50
13217
Replacement Professional Handle Kit
11807
Handle Spares Kit Professional ‘P‘ Type
11698
Calibration Kit Professional ‘P’ Type
13242
Rivet Repair Kit
13216
3
�8 " sq. dr. Mushroom Kit
www.norbar.com
65
SPARES KITS
SPARES KITS (continued)
8
14195
PROFESSIONAL TORQUE WRENCHES MODELS
550 - 1500
Ratchet Repair Kit Mdl 550/650 ¾"
14196
Ratchet Repair Kit Mdl 800/1000/1500 ¾"
14197
Ratchet Repair Kit Mdl 800/1000/1500 1"
14162
Ratchet Assembly Mdl 550/650
14163
Ratchet Assembly Mdl 1000
12297
Replacement Square Drive Mdl 550/650 ¾"
12299
Replacement Square Drive Mdl 550 1"
14157
Replacement Square Drive Mdl 800-1500 ¾"
14165
Replacement Square Drive Mdl 800-1500 1"
14185
Cover Kit for all Models
14218
14220
Secondary Lever and Support Block Assy
Upgrade kit for all Models pre 2004/169391
Secondary Lever and Support Block Assy
for all Models post 2004/169391
Secondary Lever Assembly
14187
14166
14217
8
MULTIPLIER SPARES KIT
16831
Spares Kit No. 2 Output Carrier
16836
Spares Kit No. 5 Output Carrier
16832
Spares Kit No. 7 Output Carrier
16835
Spares Kit No. 9 Output Carrier
77018.1
Sq. Drive HT3 ¾" (old style)
17185
Spares Kit HT3 ¾" Sq Dr (Pre May 1993 style with
shoulder screw)
Sq. Drive HT3 ¾"(to fit 17218, 17220 & all other models
with square drive retained by rollpin)
17676
77018.1
17185
17223
Spares Kit HT3 Carriers
17224
Spares Kit HT3 ½" Input Gear
Screw Adjustable Kit for all Models
17225
Spares Kit HT3 ¾" Input Gear
Calibration Kit ‘P’ Type for all Models
18365
Spares Kit 72mm Air Motor Handle
SLIMLINE TORQUE WRENCHES
18374
Spares 72mm Remote Block
11831
Ratchet Repair Kit SL0 ¼" (Post Jan 2008)
18544
Replacement ¾" sq. dr. ET/PTM-52 Series
11832
Ratchet Repair Kit SL0 ⁄8 " (Post Jan 2008)
18545
Replacement 1" sq. dr. ET/PTM-52 Series
18779
Replacement ¾" sq. dr. ET/PTM-72 Series
18492
Replacement 1" sq. dr. ET/PTM-72 Series
18221
Replacement ¾" sq. dr. PT 72 Series
18220
Replacement 1" sq. dr. PT 72 Series
19076
Spares Kit for Fwd/Rev Gearbox Knob pre Feb 2011 Tools
19260
Spares Kit for fwd/Rev Gearbox Knob post Feb 2011 Tools
19077
Upgrade Kit for Fwd/Rev Gearbox for PTM
8
ET/PTM-92 & ET/PTM-119 SQUARE DRIVES
18934
1" for ET/PTM-92
18935
1½" for ET/PTM-92
18999
1" for ET/PTM-119
18959
1½" for ET/PTM-119
8
VANE SETS FOR PNEUTORQUE MULTIPLIERS
18631
For PTM Series (Pack of 5)
18278
For PT 72mm Series (Pack of 6)
16218
For PT Standard Series (Pack of 6)
8
11906
3
Ratchet Repair Kit SL Wide (SL3)
11806
Spares Kit - SL0 Adj Knob
11800
Spares Kit Steel Knob for SL
29683
Mushroom Head Sq. Dr. Assy ½" SL3
11914
3
11762
Rivet Repair Kit
⁄8 "sq.dr for SL0 Fixed Head
8
INDUSTRIAL TORQUE WRENCHES
12307
Ratchet Repair Kit Industrial (except 6R)
12373
12297
12299
Ratchet Repair Kit 6R only
¾" Square Drive Assy for 3AR - 5AR
1" Square Drive Assy for 3AR - 5AR
18492
1" Square Drive Assy for 6R
12374
1" Square Drive Repair Kit, 6R only
12355
Ind Thrust Washer Spares Kit
12360
12381
End Caps - Plastic 10 pack (Industrial)
3AR Adjusting Nut
12382
No.4 Adjusting Nut
12383
4R Adjusting Nut
12384
4AR Adjusting Nut
12385
5R Adjusting Nut
12386
5AR Adjusting Nut
12387
6R Adjusting Nut
In order for Norbar to supply the correct adjusting nut, we need to know
the correct scale length for the tool being repaired. The scale length is
denoted by a number on the nut being replaced and will be of the form
e.g. 159/60.
8
SPARES FOR LUBRO CONTROL UNIT
28911
3m Hose*
28912
6m Hose*
28913
Pressure Gauge
28914
Filter Element for Filter/Regulator
28915
Bowl Assembly for Filter/Regulator
28916
Bowl Assembly for Lubricator
28917
Locking Collar
28918
*
66
17676
Norbar Product List 2016
½" BSP Taper Thread Adaptor
Other lengths of Hose are available, please contact Norbar for details.
SERVICE REPLACEMENT TORQUE WRENCHES
SERVICE REPLACEMENT TORQUE WRENCHES
SLIMLINE
PART NUMBERS
TT Wrenches returned for Service Replacement will be replaced with
TTi Wrenches shown below.
TTi20 N�m / 15 ft�lb
13285R, 13640R
SL0 1-20 N�m Adj.
11034R, 11037R, 11035R
SL0 4-20 N�m Adj.
11123R, 11087R, 11125R
SL0 1-20 N�m Torque Handle
11036R
TTi50 N�m / 35 ft�lb
13658R, 13659R
SL0 4-20 N�m Torque Handle
11126R, 11122R
TTi60 N�m / 45 ft�lb
13679R, 13680R
SL0 all 'P' Type
TTi100 N�m / 75 ft�lb
13440R, 13441R
11089R, 11085R, 11086R,
11090R, 11088R
TTi150 N�m / 110 ft�lb
13442R
TTi200 N�m / 150 ft�lb
13443R
INDUSTRIAL
PART NUMBERS
TTi250 N�m / 185 ft�lb
13444R
3AR ¾" sq. dr.
12001R
TTi300 N�m / 220 ft�lb
13445R
3AR 1" sq.dr.
12001R.01
4R ¾" sq. dr.
12006R
4R 1" sq. dr.
12006R.01
4AR ¾" sq. dr.
12007R
4AR 1" sq. dr.
12007R.01
5R ¾" sq. dr.
12009R
5R 1" sq. dr.
12009R.01
5AR ¾" sq. dr.
12012R
5AR 1" sq. dr.
12012R.01
6R 1" sq. dr.
12100R
No. 4 Torque Handle
12003R
3AR ¾" sq. dr. ‘P’
12015R
4R ¾" sq. dr. ‘P’
12020R
TT WRENCHES
PART NUMBERS
PROFESSIONAL SERIES
(up to March 2015)
Model 5
PART NUMBERS
Model 60 Adj. Industrial Ratchet
13042R, 13043R
Model 100 Adj. Industrial Ratchet
13044R, 13045R
Model 200 Adj. Industrial Ratchet
13046R
Model 300 Adj. Industrial Ratchet
13047R
Model 330 Adj. Industrial Ratchet
13049R
Model 400 Adj. Industrial Ratchet
13050R
Model 60 Adj. Automotive Ratchet
13010R, 13011R
Model 100 Adj. Automotive Ratchet
13012R, 13013R
Model 200 Adj. Automotive Ratchet
13014R
13001R, 13002R, 13003R
Model 60 Torque Handle
13018R
5R ¾" sq. dr. ‘P’
12023R
Model 100 Torque Handle
13019R
5AR ¾" sq. dr. ‘P’
12002R
Model 200 Torque Handle
13020R
No. 4 Torque Handle ‘P’
12017R
Model 300 Torque Handle
13021R
Model 60 Female Torque Handle
13022R
Model 100 Female Torque Handle
13023R
Model 200 Female Torque Handle
13024R, 13025R
Model 300 Female Torque Handle
13026R
Model 330 Female Torque Handle
13027R
Model 400 Female Torque Handle
13028R
Model 5 ‘P’
13004R, 13005R, 13006R
Model 60 ‘P’ Industrial Ratchet
13051R, 13052R
Model 100 ‘P’ Industrial Ratchet
13053R, 13054R
Model 200 ‘P’ Industrial Ratchet
13055R
Model 300 ‘P’ Industrial Ratchet
13057R
Model 400 ‘P’ Industrial Ratchet
13056R
Model 60 ‘P’ Auto Ratchet
11164R, 11171R
Model 100 ‘P’ Auto Ratchet
11138R, 11139R
Model 200 ‘P’ Auto Ratchet
11140R
Model 60 Torque Handle ‘P’
11167R
Model 100 Torque Handle ‘P’
11143R
Model 200 Torque Handle ‘P’
11144R
Model 300 Torque Handle ‘P’
11147R
Model 60 Female Torque Handle ‘P’
11170R
Model 100 Female Torque Handle ‘P’
11150R
Model 200 Female Torque Handle ‘P’
11151R, 11152R
Model 300 Female Torque Handle ‘P’
11153R
Model 400 Female Torque Handle ‘P’
13068R
The Part Numbers shown left and above are for dual scale models.
Service replacements are also available for all single scale models.
See page 64 for Norbar's Service Replacement Policy.
www.norbar.com
67
CALIBRATION SERVICES
CALIBRATION
SERVICES
Devices sent in for UKAS accredited calibration
certification will be calibrated and the ‘As Found’ readings
recorded. The calibration will be performed to the
appropriate Standard as specified in our Schedule of
Accreditation.
a)Should the device be in specification ‘As Found’, a
certificate will be raised and the device returned.
b)Should the device be out of specification, but capable
of adjustment, it will be adjusted, ‘As Left’ readings
taken, and one certificate raised with ‘As Found’ and
‘As Left’ readings on it.
c)Should the device require repair that is not covered
by a combined calibration and service, we will do so
where possible, after consultation with the customer.
Norbar are accredited by UKAS for torque
measurements between 0.005 N�m and 108,500 N�m or
the imperial equivalents. Our Schedule of Accreditation
gives further details (please refer to www.norbar.com).
UKAS accredited calibration certificates are issued under
the authority of the United Kingdom Accreditation
Service.
Norbar can calibrate non-Norbar Torque products, please
contact us with the details of your equipment.
CALIBRATION SERVICES
ELECTRONIC DEVICES
In accordance with the current standards for calibration
of torque measurement devices, it is desirable to calibrate
transducers with the display that is normally used. In this
case the ‘system’ is calibrated. If it is not possible to supply
the display unit, an equivalent calibrated display unit from
the laboratory will be used. The calibration will then be
valid for the transducer with the original display as long as
the original display has been calibrated within the last 12
months.
Calibration certificates are in accordance with the current
standard for torque measuring devices BS7882:2008, and
show the nominal torque applied, and the measured torque
readings. Measured readings may be given in mV/V on
request. Details of the standard are available on request.
It is not our intention to offer a full repair service for
torque devices from other manufacturers. Where a
device is in need of repair, the customer is advised to
have this performed by an approved service agent
or the manufacturer before submitting the device for
UKAS accredited calibration. Some electronic transducer
systems from other manufacturers may incur an additional
calibration cost; the electronics department repair
technicians will clarify this point if required. Occasionally
it will be necessary to manufacture special adaptors to
enable the calibration to be performed. This will of course
affect the price and delivery, and will be discussed with the
customer as the need arises.
CALIBRATION TO BS7882:2008 CLASS 0.1
Norbar’s UKAS accredited laboratory performs
standard calibrations on torque measuring devices to
BS7882:2008 class 0.2 increasing torques only. However
the laboratory is able to calibrate devices to class 0.1
at the customer’s request. Class 0.1 requires calibration
in four different mounting positions each rotated 90º
about the measurement axis. Classification to class 0.1
is dependent on the devices performance. Calibrations
including a decreasing series of torques can also be
provided if required. A price for these services is
available on request.
A priority calibration booking in service is available please contact
the Customer Relations Department at least one month before the
equipment is due for recalibration Tel: +44 (0)1295 753635
Fax: +44 (0)1295 753636, Email: [email protected]
68
Norbar Product List 2016
CALIBRATION SERVICES
TORQUE SCREWDRIVERS AND TORQUE WRENCHES, UKAS
ACCREDITED CALIBRATION CERTIFICATION
NORTRONIC® CALIBRATION CERTIFICATION
ONE DIRECTION
NTCC1.CW
NTCC2.CW
On receipt an ‘As Found’ calibration will be carried
out where possible. If the results do not fall within
specification the wrench will either be adjusted or a
service replacement offered.
Calibration Certificates are in accordance with the current
standard for hand torque tools BS ISO 6789:2003. The
certificate shows the nominal torque applied and the
measured torque readings.
Please note that it is Norbar’s policy to automatically
service replace torque wrenches sent in for repair
(Slimline, TT, Professional and Industrial Ranges).
If the same tool is required to be returned after repair
and calibration then this should be made clear on the
purchase order which accompanies the tool.
The part numbers shown below are for Comprehensive
Calibration, ‘As Found’ and ‘As Left’, for Torque Wrenches
up to the maximum capacity shown.
TWCC1.CW
NorTronic® all sizes
(UKAS accredited calibration for torque and
traceable certification for angle)
NorTronic ® all sizes
(Traceable certification for torque and angle)
Up to 400 N�m/300 lbf�ft
(UKAS accredited calibration for torque)
TWO DIRECTIONS
NTCC1.CW+CCW
NTCC2.CW+CCW
TWCC1.CW+CCW
NorTronic® all sizes
(UKAS accredited calibration for torque and
traceable certification for angle)
NorTronic ® all sizes
(Traceable certification for torque and angle)
Up to 400 N�m/300 lbf�ft
(UKAS accredited calibration for torque)
MANUAL TORQUE MULTIPLYING GEARBOXES, UKAS
ACCREDITED CALIBRATION CERTIFICATION
ONE DIRECTION
TWCC1.CW
TWCC2.CW
TWCC3.CW
Up to 400 N�m/300 lbf�ft
(UKAS accredited calibration for torque)
Up to 1000 N�m/750 lbf�ft
(UKAS accredited calibration for torque)
Up to 3000 N�m/2200 lbf�ft
(UKAS accredited calibration for torque)
TWO DIRECTIONS
TWCC1.CW+CCW
TWCC2.CW+CCW
TWCC3.CW+CCW
The part numbers shown below are for Certification ‘As Found’,
ONE DIRECTION
HTCC1.CW
Up to 6000 N�m / 5000 lbf�ft
TWO DIRECTIONS
Up to 400 N�m/300 lbf�ft
(UKAS accredited calibration for torque)
Up to 1000 N�m/750 lbf�ft
(UKAS accredited calibration for torque)
Up to 3000 N�m/2200 lbf�ft
(UKAS accredited calibration for torque)
HTCC1.CW+CCW
Up to 6000 N�m/ 5000 lbf�ft
www.norbar.com
69
CALIBRATION SERVICES
TOOL NAME SERVICES (continued)
CALIBRATION
This section contains combined Calibration & Services for
Norbar products. Other manufacturers’ equipment will be
handled by individual quotation. Provided that the product
is in serviceable condition*, we guarantee to carry out all
calibration, function checks and repair work in order to bring
the equipment back to its original functionality.
*Product would be regarded as unserviceable if either it or the
components required for the repair are obsolete or unavailable.
Serviceability also implies that the product is capable of repair
without complete replacement.
Service replacements are available for some products.
MECHANICAL TORQUE TESTING DEVICES, UKAS ACCREDITED
CALIBRATION CERTIFICATION
TOOL NAME
TWO DIRECTIONS
TDCCS1.CW+CCW
Up to 1500 N�m/ 1000 lbf�ft
[email protected]
From 1501 to 7000 N�m / 1001 - 5000 lbf�ft
TDCCS3.CW+CCW+
Square/Splined Drive From 7001 to
100000 N�m / 5001 to 100000 lbf�ft
Flange Drive From 7001 to 100000 N�m / 5001
to 100000 lbf�ft
TDCCS4.CW+CCW+
@
UKAS accredited calibration up to 6000 N�m. A non accredited value
at 7000 N�m is extrapolated and provided for reference only.
+
UKAS accredited calibration up to 80000 lbf�ft. A non accredited value
at 100000 lbf�ft is extrapolated and provided for reference only.
For part numbers TDCCS3.CW and TDCCS4.CW, static transducers with 2.5" square drives
and annular transducers to fit HT/PT9 & HT/PT11, a secondary calibration to extend the range
below 10% of the rated capacity may be ordered using part number TDCCS5.CW
For part numbers TDCCS3.CW+CCW and TDCCS4.CW+CCW, static transducers with 2.5"
square drives and annular transducers to fit HT/PT9 & HT/PT11, a secondary calibration to
extend the range below 10% of the rated capacity may be ordered using part number TDCCS5.
CW+CCW
ROTARY TRANSDUCERS (2004 ONWARDS), UKAS ACCREDITED
CALIBRATION CERTIFICATION (PART CODE 50708.XXX-50724.
XXX)
The part numbers shown below are for Combined Calibration
and Service, ‘As Found’ and ‘As Left’
ONE DIRECTION
MCCS1.CW
Up to 5000 N�m / 5000 lbf�ft
TWO DIRECTIONS
MCCS1.CW+CCW
Up to 5000 N�m/ 5000 lbf�ft
ELECTRONIC TORQUE TRANSDUCERS, UKAS ACCREDITED
CALIBRATION CERTIFICATION (WITH SQUARE DRIVE, FLANGE
MOUNTED & PRE 2004 ROTARY)
The part numbers shown below are for Combined Calibration
and Service, ‘As Found’ and ‘As Left’
ONE DIRECTION
TDCCS2.CW
Up to 1500 N�m / 1000 lbf�ft
TWO DIRECTIONS
TDCCS2.CW+CCW
Up to 1500 N�m/ 1000 lbf�ft
PRO-TEST, UKAS ACCREDITED CALIBRATION CERTIFICATION
The part numbers shown below are for Combined Calibration
and Service, ‘As Found’ and ‘As Left’
ONE DIRECTION
TDCCS1.CW
@
TDCCS5.CW
Up to 1500 N�m / 1000 lbf�ft
From 1501 to 7000 N�m / 1001 - 5000 lbf�ft
TDCCS3.CW+
Square/Splined Drive From 7001 to
100000 N�m / 5001 to 100000 lbf�ft
TDCCS4.CW+
Flange Drive From 7001 to 100000 N�m / 5001
to 100000 lbf�ft
ADDCALPOINTS.CCS Additional calibration steps below 10% of rated
capacity to 2% for transducers up to 7000 N�m
(5000 lbf�ft)
The part numbers shown below are for Combined Calibration
and Service, ‘As Found’ and ‘As Left’
ONE DIRECTION
PROCCS.CW
TWO DIRECTIONS
PROCCS.CW+CCW
70
Norbar Product
Listand
2016
Catalogue
Price List 2016
Pro-Test All sizes
Pro-Test All Sizes
CALIBRATION SERVICES
TOOL NAME
TRUCHECK™
DTS, UKAS ACCREDITED CALIBRATION CERTIFICATION
The part numbers shown below are for Combined Calibration
and Service, ‘As Found’ and ‘As Left’
ONE DIRECTION
ONE DIRECTION
TCCCS1.CW
TCCCS2.CW
TruCheck™ All Sizes (UKAS Accredited
Calibration Certification)
TruCheck™ All Sizes*
[email protected]
DTS up to 7000 N�m or 5000 lbf�ft
DTSCCS2.CW+
DTS from 7001 to 100000 N�m / 5001 to
100000 lbf�ft Square and Spline drive
DTS from 7001 to 100000 N�m / 5001 to
100000 lbf�ft Flange drive
DTSCCS3.CW+
TWO DIRECTIONS
TCCCS1.CW+CCW
TruCheck™ All Sizes (UKAS Accredited
Calibration Certification)
*
Issued with traceable certification.
TWA, UKAS ACCREDITED CALIBRATION CERTIFICATION
TWO DIRECTIONS
[email protected] DTS up to 7000 N�m or 5000 lbf�ft
DTSCCS2.CW+CCW+ DTS from 7001 to 100000 N�m / 5001 to
100000 lbf�ft Square and Spline drive
DTSCCS3.CW+CCW+ DTS from 7001 to 100000 N�m / 5001 to
100000 lbf�ft Flange drive
UKAS accredited calibration up to 6000 N�m. A non accredited value
at 7000 N�m is extrapolated and provided for reference only.
@
UKAS accredited calibration up to 80000 lbf�ft. A non accredited value
at 100000 lbf�ft is extrapolated and provided for reference only.
+
ETS, UKAS ACCREDITED CALIBRATION CERTIFICATION
The part numbers shown below are for Combined Calibration
and Service, ‘As Found’ and ‘As Left’
ONE DIRECTION
TWACCS.CW
TWA All Sizes
TWO DIRECTIONS
TWACCS.CW+CCW TWA All Sizes
The part numbers shown below are for Combined Calibration
and Service, ‘As Found’ and ‘As Left’
INSTCCS1.CW
ETS
ETTA, UKAS ACCREDITED CALIBRATION CERTIFICATION
The part numbers shown below are for Combined Calibration
and Service, ‘As Found’ and ‘As Left’
ETTACCS.CW
ETTA
T +44 (0)1295 753 600 | F +44 (0)1295 753 609 | E [email protected] | www.norbar.com
71
CALIBRATION SERVICES
TOOL NAME SERVICES (continued)
CALIBRATION
PRO-LOG, TTT, T-BOX, T-BOX XL™ & TTL-HE, UKAS
ACCREDITED CALIBRATION CERTIFICATION
TOOL NAME
GENERAL DEVICES
The part numbers shown below are for Combined Calibration
and Service, ‘As Found’ and ‘As Left’
ONE DIRECTION
INSTCCS3.CW
Pro-Log or TTT
These devices are outside the scheduled accreditation issued by
UKAS.
Weight Set Certificates accredited by UKAS or other
certified bodies
TWO DIRECTIONS
INSTCCS3.CW+CCW Pro-Log or TTT
INSTCCS4.CW+CCW TTL-HE, T-Box or T-Box XL™
43217R
TTL-HE Service Replacement
TST, UKAS ACCREDITED CALIBRATION CERTIFICATION
PTCERT
PneuTorque® Certificate of air pressure vs torque
ETCERT
EvoTorque® Certificate of torque and angle
ETSDPFT
ETS Data Printer. Function Test
ETSBPUFT
ETS Battery Power Unit. Function Test
FWSUFT
ETS or ETTA 5 Way Switch Unit. Function Test
TWSUFT
ETS or ETTA 2 Way Switch Unit. Function Test
Mechanical Enclosure Meter Calibration
(CW + CCW)
Ultrasonic Stress Meter certificate of calibration
EMCC
USMCC
TRANSDUCER CONVERSIONS
SQ8888
The part numbers shown below are for Combined Calibration
and Service, ‘As Found’ and ‘As Left’ This includes both an
instrument and system calibration
ONE DIRECTION
TSTCCS.CW
TST
TWO DIRECTIONS
TSTCCS.CW+CCW
TST
Section with Combined Calibration & Service ends here.
CALIBRATION BEAMS & WEIGHTS, UKAS ACCREDITED
CALIBRATION CERTIFICATION
The part numbers shown below are for Length Certification, ‘As
Found’ and ‘As Left’
72
CBLC1
Disc or Beam up to 150 N�m / 100 lbf�ft
CBLC2
Disc or Beam up to 1500 N�m / 1000 lbf�ft
CBLC3
Disc or Beam up to 6800 N�m / 5000 lbf�ft
WEIGHT.CC1
Calibration of Weights up to 25 kgf /
245 N / 55 lbf
Norbar Product
Listand
2016
Catalogue
Price List 2016
SQ2005
ETS Transducer conversion to Smart Transducer
(does not include calibration)
ETTA Transducer conversion to Smart Transducer
(does not include calibration)
TERMS & CONDITIONS
TERMS & CONDITIONS - SUPPLY OF GOODS
TOOL NAME
1. INTERPRETATION AND APPLICATION OF TERMS
4NON-DELIVERY
1.1 In these conditions the following words have the following meanings:
“the Buyer”means the person(s), firm or company who purchases Goods from Norbar;
“Norbar”means Norbar Torque Tools Limited (380480), with a principal place of
business at Wildmere Road, Banbury, Oxon, OX16 3JU;
“Contract”means the contract between Norbar and the Buyer for the sale and purchase
of the Goods, incorporating these Conditions;
“Delivery Point”means the address within the UK mainland which is notified to Norbar as the
place for delivery of the Goods;
“Engineer to Order Goods”
means any non-standard Goods specifically designed, modified and/or made
for the Buyer or to the Buyer’s specification;
“Goods”means any goods agreed in the Contract to be supplied to the Buyer by
Norbar (including any part or parts of them).
1.2Subject to any variation under condition 1.4 the Contract will be on these Conditions to the exclusion of all other
terms and conditions. They supersede any previously issued terms and conditions of supply.
1.3No terms or conditions endorsed upon, delivered with or contained in the Buyer’s purchase order, confirmation of order,
specification or other document will form part of the Contract.
1.4These conditions apply to all of Norbar's sales and any variation to these conditions and any representations about
the Goods will have no effect unless expressly agreed in writing and signed by an authorised representative of Norbar.
The Buyer acknowledges that it has not relied on and will have no remedy in respect of any statement, promise
or representation made or given by or on behalf of Norbar which is not set out in the Contract. Nothing in this
condition will exclude or limit Norbar's liability for fraudulent misrepresentation.
1.5Each order or acceptance of a quotation for Goods by the Buyer from Norbar will be deemed to be an offer by the
Buyer to purchase Goods subject to these Conditions and no order placed by the Buyer will be deemed to be accepted
by Norbar until a written acknowledgement of order is issued by Norbar or Norbar delivers the Goods to the Buyer,
whichever occurs first.
1.6Any quotation is given on the basis that no Contract will come into existence until Norbar despatches an
acknowledgement of order or delivers the Goods to the Buyer. Any quotation is valid for a period of 30 days only
from its date, provided that Norbar has not previously withdrawn or amended it.
4.1The quantity of any consignment of Goods as recorded by Norbar upon despatch from Norbar's place of business
will be conclusive evidence of the quantity received by the Buyer on delivery unless the Buyer can provide conclusive
evidence proving contrary.
4.2Norbar will not be liable for any non-delivery of Goods (even if caused by Norbar's negligence) unless written notice
is given to Norbar within 14 days of the date when the Goods would, in the ordinary course of events, have been
received.
4.3Any liability of Norbar for non-delivery of the Goods will be limited to replacing the Goods within a reasonable time
or issuing a credit note at the pro rata Contract rate against any invoice raised for such Goods.
2.DESCRIPTION
2.1The description of the Goods will be as set out in Norbar's catalogue or other published specification current at the
time that the relevant order is accepted by Norbar or, in the case of Engineer to Order Goods, as specified in the
relevant quotation.
2.2Norbar reserves the right to make any changes to the specification of the Goods (including Engineer to Order Goods)
which are required to conform with any applicable statutory or regulatory requirements or which do not materially
affect their quality or performance. The Buyer will not be permitted to reject Goods and Norbar will have no liability
to the Buyer in respect of any failure of the Goods to comply with any specification in these circumstances.
2.3The Buyer acknowledges that all intellectual property rights in the Goods (including Engineer to Order Goods) and in
any novel combinations or applications of the Goods (whether as a kit, system or otherwise) belong solely to Norbar
and, to the extent that any such rights do not automatically vest in Norbar by operation of law, hereby assigns to
Norbar all such rights. The Buyer will take any action and execute any document reasonably required by Norbar to
give full effect to this condition.
5RISK/TITLE
5.1 The Goods are at the risk of the Buyer from the time of delivery.
5.2 Ownership of the Goods will not pass to the Buyer until Norbar has received in full (in cash or cleared funds) all sums
due to it in respect of the Goods and all other sums which are or which become due to Norbar from the Buyer or
any account.
5.3 Until ownership of the Goods has passed to the Buyer, the Buyer will hold all Goods on a fiduciary basis as Norbar's
bailee and Norbar will be entitled at any time:
a)to require (at no cost to Norbar) that the Goods are stored separately and clearly marked in such a way that
they will readily be seen to be the property of Norbar; and/or
b)to require the Buyer to deliver up the Goods or any part of them to Norbar and if the Buyer refuses to do so,
to immediately repossess them and/or
c)to enter any premises or vehicle (by its employees or agents and in the case of premises, with or without
vehicles) where Goods still owned by Norbar are stored or reasonably thought to be stored in order to inspect
and/or repossess them.
5.4Norbar will be entitled to recover payment for the Goods ordered notwithstanding that ownership of the Goods has
not passed from Norbar.
5.5The Buyer may resell the Goods before ownership has passed to it providing that any such sale is made in the
ordinary course of its business at full market value and the Buyer is not aware that an event specified in condition
5.6(a) has occurred or is likely to occur.
5.6Until ownership of the Goods has passed to the Buyer, the Buyer's right to possession of the Goods will terminate
immediately if:
a)the Buyer is made bankrupt or petitions for his own bankruptcy, or has a receiver, administrative receiver or
administrator appointed over all or any of its assets or undertaking or, other than for the purposes of a solvent
amalgamation or reconstruction, enters into liquidation, enters into any composition or arrangement with or for
the benefit of it creditors or ceases to carry business; or
b)the Buyer fails to observe or perform any of its obligations under the Contract or any other Contract between
Norbar and the Buyer or;
c) the Buyer encumbers or in any way charges any of the Goods.
5.7 On termination of the Contract for any reason, the Norbar's rights under this condition 5 will remain in effect.
3DELIVERY
3.1 In the case of sales within the UK mainland, delivery will take place:
a)if the Goods are to be collected, on delivery to the Buyer or to the Buyer’s named carrier at Norbar's premises
at Wildmere Road, Banbury, Oxon, OX16 3JU; and
b)in all other cases, on delivery to the Delivery Point.
In the case of sales outside the UK mainland (including non-mainland UK) sales will be delivered FCA Norbar's premises
at Wildmere Road, Banbury, Oxon, OX16 3JU (INCOTERMS 2010 edition), except where otherwise agreed in writing.
3.2Any dates specified by Norbar for delivery of the Goods are intended to be an estimate and time for delivery will not
be made of the essence by notice. If no dates are so specified, delivery will be within a reasonable time. The Goods
may be delivered by instalments.
3.3If for any reason the Buyer will not accept delivery of any of the Goods when they are ready for delivery, or Norbar
is unable to deliver the Goods on time because the Buyer has provided appropriate instructions, documents, licenses or
authorisations then, without prejudice to any other right or remedy available to Norbar:
a) risk in the Goods will pass to the Buyer;
b) the Goods will be deemed to have been delivered: and
c)Norbar may store the Goods until delivery whereupon the Buyer will be liable for all related costs and expenses
(including, without limitation, storage and insurance).
3.4Norbar may, at its discretion, accept returns of Goods ordered in error or no longer required, subject to the payment
of a handling charge of 15% of the order value (excluding VAT), except that:
a) Production 'P' type wrenches will not be accepted for return;
b)Goods supplied with a UKAS accredited calibration certificate will be subject to a recalibration charge in addition
to the handling charge;
c)Engineer to Order Goods may be charged for up to 100% of full price.
Goods returned for credit will only be accepted if they are returned in the original packaging, in a new, unused
condition, carriage paid withing 30 days after the despatch date.
T +44 (0)1295 753 600 | F +44 (0)1295 753 609 | E [email protected] | www.norbar.com
73
TERMS & CONDITIONS
TERMS & CONDITIONS - SUPPLY OF GOODS
6 PRICE AND PAYMENT
6.1Unless otherwise agreed by the Company in writing the price for the Goods will be the price set out in
the Company’s price list current as at the date of delivery or deemed delivery of the Goods.
6.2The price for the Goods will be exclusive of any value added tax which the Buyer will pay in addition
when it is due to pay for the Goods. The price for the Goods includes the cost of delivery if the order
(i) is for delivery on Monday to Friday (inclusive) within the UK mainland to the Buyer’s usual Delivery
Point using the Company’s usual delivery method and (ii) has a value of over £100.00 (excluding VAT).
In all other cases, the cost of delivery will be charged in addition and will be due for payment at the
same time as payment for the Goods is due.
6.3 For customers holding an account with the Company, payment of the price for the Goods is due within
the agreed payment terms for that account. If any amount payable is not made within 30 days after
the due date in accordance with the terms of the account, Norbar may withdraw credit facilities. For
customers who do not have an account with the Company, or from whom credit facilities have been
withdrawn, payment is due at the time the order is placed and may be tendered by cheque or credit
card. In all cases, payment must be in pounds sterling (except where otherwise agreed in writing).
6.4 Time for payment will be of the essence.
6.5No payment will be deemed to have been received until the Company has received cleared funds.
6.6All payments payable to the Company under the Contract will become due immediately upon
termination of this Contract notwithstanding any other condition of the Contract or any other
arrangement or agreement between the parties.
6.7The Buyer will make all payments due under the Contract without any deduction whether by way of
set-off, counterclaim, discount, abatement or otherwise unless the Buyer has a valid court order requiring
an amount equal to such deduction to be paid by the Company to the Buyer.
6.8If the Buyer fails to pay the Company any sum due pursuant to the Contract the Buyer will be liable
to pay interest to the Company on such sum from the due date for payment at the annual rate of
4% above the base lending rate from time to time of HSBC Bank plc, accruing on a daily basis until
payment is made, whether before or after any judgment.
7. LIABILITY OF THE COMPANY
7.1The Company warrants that, subject to the other provisions of these Conditions upon delivery, and for a
period of 12 months after the date of delivery, the Goods will:
a) be of satisfactory quality within the meaning of the Sale of Goods Act 1979; and
b)comply in all material respects with the specification for them as set out in the Company’s
catalogue or other published specification current at the time that the order for the Goods was
accepted by the Company.
7.2The Company will not be liable for a breach of any of the warranties in condition 7.1 unless:
a)the Buyer gives written notice of the defect to the Company within 14 days of the time when the
Buyer discovers or ought to have discovered the defect; and
b)the Buyer returns the defective Goods properly packed, carriage paid to the Company’s premises at
the address given in condition 1.1.
7.3 The Company will not be liable for a breach of the warranties in condition 7.1 if:
a) the Buyer makes any further use of the Goods after giving such notice; or
b)the Goods have been misused, mishandled, overloaded, amended, modified or repaired in any way
by the Buyer or its customers, or used for any purpose other than that for which they were
designed; or
c)the defect is due to fair wear and tear or arises because the Buyer or its customer failed to
follow the Company’s oral or written instructions as to the storage, installation, commissioning, use
or maintenance of the Goods or (if there are none) good trade practice.
7.4Subject to conditions 7.2 and 7.3, if any of the Goods do not conform with any of the warranties in
condition 7.1, the Company will at its option repair or replace such Goods (or the defective part of
them) or refund the price of such Goods at the pro rata Contract rate.
7.5If the Company complies with condition 7.4, it will have no further liability for a breach of any of the
warranties in clause 7.1 in respect of such Goods.
7.6Except as provided in condition 7.1, the Company makes no representation or warranty, whether express
or implied, as to the quality or fitness for purpose of the Goods and all warranties, conditions and
other terms which may be implied by statute or common law are, to the fullest extent permitted by
law, excluded from the Contract.
7.7 Nothing in this Contract excludes or limits the liability of the Company for:
a) death or personal injury caused by the Company’s negligence; or
b) under section 2(3) of the Consumer Protection Act 1987; or
c) for fraud or fraudulent misrepresentation; or
d) for any matter which it would be illegal for the Company to exclude or attempt to exclude its
liability.
74
Norbar Product List 2016
THE BUYER’S ATTENTION IS IN PARTICULAR DRAWN TO THE PROVISIONS OF
CONDITION 7.8
7.8 Subject to 7.7:
a)the Company’s total liability in contract, tort (including negligence or breach of statutory
duty), misrepresentation, restitution or otherwise arising in connection with the performance or
contemplated performance of this Contract will be limited to the price of the Goods; and
b)the Company will not in any event be liable to the Buyer for any loss of profit, loss of business
or depletion of goodwill, in each case whether direct, indirect or consequential, or any claims for
consequential compensation whatsoever (howsoever caused) which arise out of or in connection
with this Contract.
7.9 The Buyer acknowledges that the price of the Goods has been calculated on the basis that the
Company excludes and limits its liability in accordance with condition 7.8.
7.10Where the Goods are sold under a consumer transaction, the statutory rights of the Buyer are not
affected by these Conditions.
8. FORCE MAJEURE
The Company reserves the right to defer the date of delivery or to cancel the Contract or reduce the
volume of the Goods ordered by the Buyer (without liability to the Buyer) if it is prevented from or
delayed in the carrying on of its business due to circumstances beyond the reasonable control of the
Company including, without limitation, acts of God, governmental actions, war or national emergency, riot,
civil commotion, fire, explosion, flood, epidemic, lock-outs, strikes or other labour disputes (whether or
not relating to either party’s workforce), or restraints or delays affecting carriers or inability or delay in
obtaining supplies of adequate or suitable materials or components.
9. NOTICES
Any notice to be given under this Contract will be in writing and will be sent by first class mail within
the UK, or by air mail, or by fax; in the case of the Company to the address set out in condition 1.1
and in the case of the Buyer to the Delivery Point or such other address or fax number as the Buyer
may from time to time notify to the Company for this purpose in accordance with this condition.
Notices sent as above will be deemed to have been received 3 working days after the date of posting
(in the case of mail within the UK), or seven working days after the date of posting (in the case of
air mail), or on the next working day after transmission (in the case of faxed messages) but only if a
transmission report is generated by the sender’s fax machine recording error free transmission of all
pages to the correct fax number.
10.GENERAL
10.1The parties to the Contract do not intend that any term of the Contract will be enforceable by virtue
of the Contracts (Rights of Third Parties) Act 1999 by any person that is not a party to it, except that
any member of the group of companies whose holding company is Norbar Torque Tools Holdings Ltd
may directly enforce any term of the Contract.
10.2Each right or remedy of the Company under the Contract is without prejudice to any other right or
remedy of the Company whether under the Contract or not.
10.3If any provision of the Contract is found by any court, tribunal or administrative body of competent
jurisdiction to be wholly or partly illegal, invalid, void, voidable or unenforceable it will to the extent of
such illegality, invalidity, voidness, voidability or unenforceability be deemed severable and the remaining
provisions of the Contract and the remainder of such provision will continue in full force and effect.
10.4The Buyer will not be entitled to assign the Contract or any part of it without the prior written
consent of the Company. The Company may assign the Contract or any part of it or sub-contract any
or all of its obligations under the Contract to any person, firm or company.
10.5Failure or delay by the Company in enforcing or partially enforcing any provision of the Contract will
not be construed as a waiver of any of its rights under the Contract.
10.6Any waiver by the Company of any breach of, or any default under, any provision of the Contract by
the Buyer will not deemed a waiver of any subsequent breach or default and will in no way affect the
other terms of the Contract.
10.7The formation, existence, construction, performance, validity and all aspects of the Contract will be
governed by English law and the parties submit to the non-exclusive jurisdiction of the English courts.
www.norbar.com
75
PRODUCT LIST 2016
CONTENTS
CONTENTS
CONTENTS
Torque Screwdrivers
TT Torque Wrenches
Electronic Torque Wrenches
Specialist Torque Wrenches
Professional Torque Wrenches
ClickTronic Torque Wrenches
Slimline™ Torque Wrenches
Industrial Torque Wrenches
Electrode Torque Wrenches
Spanner End Fittings
Manual Torque Multipliers
Electronic Torque Multipliers
Pneumatic Torque Multipliers
Accessories for Multipliers
Torque Measurement Instruments
Transducers
Transducer Leads
Loaders and Attachments
Test Fixtures
Hydraulic Tool Calibration Fixtures
Harsh Environment HE Range
Ultrasonic Measurement
Calibration Beams & Weights
Spares Kits
Service Replacement Torque Wrenches
Calibration Services
Terms and Conditions
NORBAR PROMOTIONAL MATERIAL
CATALOGUES & LEAFLETS
07426
General Catalogue
07510
Oil & Gas Leaflet
07513
Manufacturing & Assembly Leaflet
07514
Transportation Leaflet
07512
Aerospace Leaflet
07515
Energy Generation Leaflet
07557
Oil & Gas ETO Leaflet
07516
EvoTorque® Leaflet
07554
USM Leaflet
07560
T-Box XL™ Leaflet
07563
New Professional Leaflet
07536
ClickTronic Leaflet
PROMOTIONAL ITEMS
07509
Norbar Oval Logo Sticker (156mm)
07524
‘Made in England’ window sticker
07525
‘Made in England’ wall sticker
07533
Promotional Stickers (A4 sheet)
4
5
7
8
9
12
16
17
19
20
24
28
32
38
42
46
50
51
52
54
56
60
62
64
67
68
73
SQ1946 Set of Posters (various)
Distributed by
CUSTOMER RELATIONS
OFFICE OPENING HOURS
CONTACT DETAILS
Monday - Thursday 07:30 - 17:30
Friday
07:30 - 16:15
New Sales
Direct Tel +44 (0)1295 753600
Email [email protected]
Part No. 07437.16
After Sales Service
+44 (0)1295 753635
[email protected]
Norbar Torque Tools Ltd
Wildmere Road, Banbury
Oxfordshire, OX16 3JU
UNITED KINGDOM
www.norbar.com
© Norbar Torque Tools Ltd 2016
PRODUCT LIST 2016
FOLD
OUT
LEGEND
ON REVERSE
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement