Electro-Voice ETX12P Data Sheet

Electro-Voice | ETX-12P
ETX-12P
▪ 2000 W amplifier and 135 dB peak SPL
▪ Single-knob DSP includes presets for multiple
configurations and top+sub combinations
(performance style, locations, and space)
▪ Loudspeaker system performance monitoring via
integrated LCD and front panel LED
▪ SST design assures precise and consistent coverage
▪ Designed for floor, stacked, or tilt pole mount (0 or
7.5 degrees) for portable or permanent installation
(Eight (8) M10 threaded suspension points)
ETX-12P from Electro-Voice is a high-power two-way
compact loudspeaker; it can be used in a variety of
portable and permanent applications.
The DSP (Digital Signal Processing) menus offer
extensive configurations, crossovers, selective voicing,
protection limiters, EQ modes, and a lockout mode
prevents casual changes to the system. Loudspeaker
system performance is optimized via an LCD screen.
The front LED indicates power or can be configured to
indicate limit.
EV-patented SST (Signal Synchronized Transducers)
waveguide design provides uniform coverage and
directivity. Waveguides are optimized using advanced
simulation software and propriety algorithms for
precise control and lowest distortion. EV designed and
manufactured transducers include SMX woofer
technology using composite cone materials, flux
stabilizing rings, and thermal management. This
transducer yields lower distortion, smooth response
and high SPL. The high-efficiency DH3-B compression
driver has a convex diaphragm driving a coherent
phase device extending frequency response to 20 kHz.
EV’s FIR-Drive technology utilized the latest FIR (Finite
Impulse Response) filter technology to optimize
transducer linearity and advanced limiter algorithms
for independent peak and thermal transducer
protection. The enclosure is constructed out of
18-mm, 13-ply birch plywood finished with EVCoat.
ETX Powered Loudspeakers combine EV-engineered
intelligent DSP, high-powered amplifiers and
high-efficiency transducers to deliver that legendary
EV sound and performance.
Technical specifications
Frequency Response (-3 dB):
55 Hz – 20 kHz1
Frequency Range (-10 dB):
43 Hz – 20 kHz1
Maximum SPL:
Coverage (H x V):
Power Rating:
135 dB peak2
90° x 60°
2000 W
LF Transducer:
SMX2120 300 mm (12 in)
HF Transducer:
DH3-B 1.25-in titanium
compression driver
Crossover Frequency:
Connectors:
Enclosure:
Grille:
Suspension:
Dimensions (H x W x D):
1600 Hz
(2) XLR/TRS combo jack and (1)
XLR link output
18 mm, 13-ply birch plywood with
EVCoat
16AWG steel with powdercoat
(8) M10 suspension points
613 mm x 381 mm x 400 mm
(24 in x 15 in x 16 in)
Net Weight:
23.6 kg (52.0 lb)
Shipping Weight:
26.8 kg (59.1 lb)
Power Consumption:
100 – 240 V~, 50 – 60 Hz, 1.6 –
0.8 A3
2 | ETX-12P
1.
2.
Full-Range loudspeaker amplifier panel:
Full space measurement using the music DSP preset.
Maximum SPL is measured at 1 m using broadband
pink noise at maximum output.
Current rating is 1/8 power.
3.
System overview
Frequency response:
Caution!
This Electro-Voice loudspeaker should be suspended overhead only in accordance with the
procedures and limitations specified in the
!
User’s Manual and possible manual update
notices. This system should be suspended
with certified rigging hardware by an author-
1.
2.
3.
4.
5.
6.
7.
ized rigging professional and in compliance
with local, state, and federal overhead suspension ordinances.
LCD
MASTER VOL/DSP
INPUT LEVEL
MIXED OUTPUT
INPUT
POWER
MAINS IN
For more information, see the ETX Powered
Loudspeakers User Manual (F.01U.276.083).
Dimension drawing:
225 mm
[9 in]
381 mm
[15 in]
304 mm
[12 in]
613 mm
[24 in]
236 mm
[9 in]
400 mm
[16 in]
159 mm
[6 in]
40°
166 mm
[7 in]
3 | ETX-12P
Ordering information
ETX-12P US
12-inch 2-way powered loudspeaker, black, US 120V
Order number ETX-12P-US
ETX-12P EU
12-inch 2-way powered loudspeaker, black, EU 240V
Order number ETX-12P-EU
Accessories
ETX-12P Wall Mount Bracket
Wall mount bracket for ETX-12P, black
Order number ETX-BRKT12
ETX-12P, ETX-15P, and ETX-35P Truss Adaptor
Truss adaptor for ETX-12P, ETX-15P, and ETX-35P,
black
Order number ETX-TCA-L
ETX-12P Cover
Padded cover for ETX-12P, EV logo
Order number ETX-12P-CVR
EBK-M10 Eyebolt Attachment Kit
Forged M10 eyebolt kit, set of 3
Order number EBK-M10-3PACK
Represented by:
Germany:
Bosch Sicherheitssysteme GmbH
Robert-Bosch-Ring 5
85630 Grasbrunn
Germany
Bosch Security Systems, Inc.
12000 Portland Avenue South
Burnsville MN 55337
USA
www.electrovoice.com
© Bosch Security Systems 2014 | Data subject to change without notice
Document Number F.01U.276.071 | Vs3 | 02. Jul 2014