ALLNET ALL048900V2 Datasheet

ALLNET

ALL048900V2

Power over Ethernet Gigabit Injector / Smart Plug and

Play / IEEE802.3af/at/at++ 90 Watt

• support IEEE802.3, IEEE802.3u, IEEE802.ab,IEEE802.3af, IEEE802.3at and LT

PoE 90W

• 1 Port 10/100/1000 Base-T (Data) for connection to a switch, and

1 Port 10/100/1000 Base-T (Power/Data) for connection to a PoE Device (PD)

• Automatic detection of whether the connected device is PoE capable

Article: 112270

Note: Product specifi cation is subject to change without notice .

www.allnet.de

With the ALLNET ALL048900V2 High Power PoE Injector you install your PoE-enabled IP devices such as wireless access points,

VoIP phones and much more totally independent of existing electrical outlets.

So can choose the best locations for example WLAN Access Points Installations in a building regarding the wireless technology, without having to worry about Power cabling.

Non-PoE switches can be effi ciently „upgraded“ with Power over Ethernet, especially when you only need a few ports with PoE power supply. Here the ALL048900V2 saves the expensive purchase of a PoE switch.

The ALLNET ALL048900V2 supports the IEEE802.3af Standard with a power of 15,4 Watt,

The IEEE802.3at High Power Standard with 30 Watt and the LT PoE with 90 Watt Power.

The ALL048900V2 must not be confi gured. It has an RJ45 jack and an RJ-45 output connector, which are connected to this switch and the end device to the PoE injector. The cable length can here, as usual in Ethernet, up to 100 meters between the switch and terminal in total.

The compact design and the metal case of the ALLNET ALL048900V2 can be very inconspicuous installed and is extremely robust.

Item Specifi cation

Standards:

Ethernet Ports:

LED Indicators:

Power Input:

Power consumption:

Attached Power Adapter:

Case:

Dimension:

Weight:

IEEE802.3af Power over Ethernet

IEEE802.3at Power over Ethernet enhancements

LT PoE 90W

IEEE802.3 10BaseT

IEEE802.3u 100BaseTX

IEEE802.ab 1000BaseT

1x RJ45 10/100/1000Mbps for connection to passive switch or hub

1x RJ45 10/100/1000Mbps for connection to PoE device

Power / PoE Act / Status

44~57V

System: 5W (Max.)

LT PoE+: up to 90W

Input: 100~240VAC

Output: 56VDC/2A, 70W (Max.)

Metal case, wall-mountable

Length/Width/Height: 102 x 75 x 23 mm

0.28 kg (only device)

Environment:

Marking:

Temperature operating: 0 ~ 40 °C

Humidity operating: 10% ~ 90% (non-condensing)

Temperature storage: -25 ~ 90 °C

FCC Class A, CE

Note: Product specifi cation is subject to change without notice .

www.allnet.de

Overview of supported PoE standards and cable assignment

The ALL048900V2 supports various PoE devices. The devices are scanned by the injector and will be automatically provided with the correct power.

The table shows an overview of all supported standards and power levels.

ALL048700

ALL048701

ALL048600

ALL048605PD s:

ALLNET PoE Splitter/Extractor LTPoE 90W 10-25V switchable ALL048700

ALLNET PoE Splitter-Mini/Extractor LTPoE 60W 5-14V switchable ALL048701

ALLNET PoE repeater gigabit AT++/LTPoE 90W ALL048600

ALLNET switch unmanaged 4 port gigabit LT-PoE 90W 1 port gigabit PD, fanless,

ALL048605PD

Note: Product specifi cation is subject to change without notice .

www.allnet.de