high-volume industrial traffic barriers
TECHNICAL SPECIFICATIONS
11
SECTORII 1
6
4
The SECTOR II is so advanced it takes access control at the traffic barrier entrance to the next level.
With CENTURION’s ChronoGuard timer technology onboard, any of the SECTOR II’s inputs that activate the barrier can be set to
operate automatically or be time-barred at any time you choose. Its built-in Real Time Clock and Calendar timer allows you to set
up different exclusions, which can cater for public holidays, special Time-periods, etc.
3
10
2
13
Boom pole raise time
(adjustable)3
Manual override
7
Accessories
Very often, traffic barriers are used in conjunction with motorised gates at the entrances to
business parks, housing estates, etc. The traffic barrier controls access during the day when traffic
volumes are high, while the gate is used at night when greater security is required. ChronoGuard
can now be used to automatically switch operation from the SECTOR II to the gate motor as and
when required. Security has never been this convenient.
1
3.0m
4.5m
6.0m
1.2 sec
3 sec
3 sec
Allan key operated from outside unit
Maximum number of
operations per day
3000
Duty cycle - mains present4 5
80%
Operations in standby with
7Ah battery6
33
2
170mA
Boom pole length
9
Once you’ve set up the SECTOR II’s ChronoGuard using the intuitive LCD screen on the controller, you’ll start feeling particularly
redundant. For instance:
CP84SM - 1.8A @ 13.8V
Current consumption (mains)
9
12
10
Battery-driven (standard capacity - 7Ah)2
Battery charger
14
Half day7
Full day
3000
3000
7
Collision sensing
Electronic
Operating temperature range
CLAWS
TRAPEX
Required to enable the free-exit
facility or the closing/safety loop
facility - ground loop to be fitted
Add real security with seamless
integration to our SECTOR II.
Four different configurations
available
A traffic barrier pedestrian fence
that stops people from
circumventing the SECTOR II
access control point
44
6
55
-15°C to +65°C
Onboard receiver type
FLUX 12-24V DC
To increase security and control traffic flow you can automatically shut down certain traffic lanes
controlled by the SECTOR II at quieter times of the day, or over weekends and on holidays.
SECTORII 3
12V DC
Motor power supply
8
SECTORII 2
90V - 240V AC ± 10%, 50Hz1
Motor voltage
1
5
CHRONOGUARD TIMER TECHNOLOGY (a world first)
Input voltage
Centurion code-hopping multichannel
Receiver code storage capacity
500 transmitter buttons
Receiver frequency
433MHz
1. Can operate off a solar supply, consult your local CENTURION dealer for assistance
2 .Can increase battery capacity for longer standby times
3. Boom pole raise and lower times are both individually configurable to suit individual
installation requirements
4. Based on 25°C ambient temperature and unit not in direct sunlight
5. Based on an output torque of less than 50% of rated
6. Based on basic operator excluding closing loop detector
7. Limited by daily usage
Barrier housing specifications
ChronoGuard gives you the ability to time-bar transmitters that have been learned into the
system. This gives you the flexibility to control when your barrier can be opened by specific
transmitter holders. For example, staff may be given access to the office park during the week,
but on weekends you may wish to limit their access to the property.
ChronoGuard technology allows for almost unlimited time-based functionality, all of which is very simply set up on the controller
via the intuitive menu system and LCD user interface. The following functionality is available:
• Time-activate many of the physical inputs and outputs of the controller (see table below)
• Time-bar many of the physical inputs and outputs of the controller, as well as particular remote buttons learned into the
onboard receiver (see table below)
• The Real Time Clock and Calendar timer has the following flexibility:
• It supports 100 Time-periods, that may be set according to:
• Weekdays (M + T + W + T + F)
• Weekends (S + S)
• Special calendar events (family holiday, etc.) occurring on any date until the year 2100
• Annual calendar events (New Year’s Day, etc.)
• Allows for multiple Time-periods to be set during a 24-hour period
• The Real Time Clock and Calendar timer is backed up for at least one hour to maintain the current time and date in the event
that all power is removed from the controller
Accommodates applications with
limited headroom
Pole hinges away from barrier if
accidentally knocked reducing
the chance of it being damaged
Visually indicate when it is safe
for a vehicle to proceed into or
out of an access controlled area
7
CENTURION transmitters
Lck/Stp:
Holiday
Lockout
ILP:
Inductive loop
detector
Aux IO:
Auxiliary
output
Backup Memory Module
Available in one-, two-, three- and Back up all the transmitters and
four-button variants. Incorporates operating details set up in the
code-hopping encryption
controller
10
9
Gooseneck
Steel pole for mounting
intercom gate station or access
control reader
11
12
facebook.com/CenturionSystems
Always recommended on any
gate automation installation
[email protected]
Grade 316
brushed
stainless steel
Base frame surface
protection
Mild steel, hot
dip galvanised
Grade 430
stainless steel
Grade 316
stainless steel
Housing construction
Sheet metal housing, 1.6mm wall thickness with
separate fabricated base frame to raise housing off
ground
Main housing surface
protection
Red electronic cover with traffic yellow
(Other options are available on request)
Colour
Housing protection rating
IP 55
Boom pole specifications
Aluminium, round profile with plastic end cap
Outside diameter: 76.2mm; Wall thickness: 1.27mm
800g/metre
Alternative means of powering
the system - consult your
CENTURION dealer
13
HIGH-VOLUME INDUSTRIAL
TRAFFIC BARRIERS
Epoxy-coated white with red reflective tape
OVERALL DIMENSIONS
285mm
SOLO/Lattice Proximity
Access Control System
Youtube.com/CenturionSystems
Marine areas
Grade 430
stainless steel
with epoxy
coating
437mm
304mm
14
Precision engineering, impressive speed
best performance
76mm
Aux IO:
Auxiliary
input/ouput
Time-bar
Physical connection to an external device, eg. Inductive Loop Detector, SMARTGUARD keypad, etc
Coastal plains
Surface protection, colour
and markings
Solar supply
SECTORII
Grade 316
Inland areas
Weight
CENTURION Infrared
beams
SECTORII
Grade 430
Pre-galvanised
plate with epoxy
coating
Dimensions
Time-activate
Interfaces with onboard CENTURION code-hopping receiver
Aux IO - open collector output that can be used to drive an external relay for operating any external device, eg. water feature, security lights, etc.
Application
Material and profile
Physical outputs
Lower:
Barrier
lower
8
SECTORII
Standard
Proximity reader allowing for
access to both pedestrians and
vehicles, while offering a higher
level of security than a keypad
0.07.A.0297_20042016
Manual pushbutton
Catchpost
Industrially-rated switch,
typically for a guard to manually
activate the barrier
Allows locking the boom
pole in the lowered position recommended with 6m boom
poles to support pole tip and
prevent drooping due to flexure
in the pole
Call 0860-CENTURION (0860 236 887) to order or to find out more
Technical support line: 0861 003 123 (Monday - Friday: 07h00 - 18h00, Saturday 8h00 - 13h30)
E&OE. Centurion Systems (Pty) Ltd reserves the right to change any product without prior notice
890mm
Raise:
Barrier
raise
MIDI Traffic Light
20mm
NMI:
Non-memory
input
Breakaway Coupling
1167mm
Physical inputs
MI:
Memory
input
Jack-knife assembly
www.centsys.com
TRAFFIC BARRIERS
SLIDING GATE OPERATORS
SWING GATE OPERATORS
GARAGE DOOR OPERATORS
ACCESS CONTROL
INTERCOMS
TRAFFIC
BARRIERS
MAIN FEATURES
Improved cable routing and securing for the neatest installation
Every aspect of the SECTOR II has been designed to streamline installation and ensure that your
access control system not only works hard, but looks good, too. Tie strap sockets have been
provided on both the cabinet and the electronics tray, with cable routing down the front flange of
the cabinet, resulting in an installation that’s as neat and tidy as an officer in uniform.
Rapid opening
Lots of vehicles coming in and out? You need something that goes up and down. Fast!
The SECTOR II is ideal for high-volume applications and puts a manically ticking metronome to
shame – raising a three metre pole in under 1.2 seconds and lowering it just as quickly.
Introducing the heir to the throne of high-volume
vehicular access control. With an updated look
that perfectly matches its superior performance,
an optimised design for the ultimate in ease of
installation and boasting the awe-inspiring speed
that made its predecessor king of the access
control jungle, the SECTOR II is the embodiment
of automation evolution.
Speed. Performance. Intelligence.
The SECTOR II is the benchmark against which all
others are measured.
Comprehensive input and output
Battery backup
With our intuitive, user-friendly LCD interface, setting up the SECTOR II is not just simple – it’s
child’s play. Set the SECTOR II to handle any vehicle access control application with the touch of a
button. To make things even easier, our state-of-the-art motor controller not only ensures smooth
and reliable operation, it allows you to set your boom’s opening and closing speed to your liking.
With our 12V battery-driven motor, your security is never compromised. The SECTOR II will
continue to stay on, even when the power is off – beating up and down 3000 times during a 24
hour power failure before it needs a recharge. If you’re expecting no power for a while,
the built-in mains failure detection can be set to keep the barrier raised under power failure
conditions.
Onboard loop detector support
If you’d like to fit an additional loop, simply clip a CENTURION standalone loop detector into the
convenient custom bracket or connect the loops and you’re good to go!
High-torque boom pole operation
The SECTOR II’s DC motor and reduction gearbox generate enough torque to make sure that
your boom goes up and down for ever and ever. Come sunshine, rain or howling winds, you’ll
always be able to get in and out.
Operate wirelessly, thanks to CENTURION2
Besides its code-hopping technology offering the highest level remote control security,
CENTURION onboard receiver is both multichannel and multi-user, allowing a multi-button
remote to operate any combination of the system inputs, such as Barrier Raise, Barrier Lower, etc.
Safe sensitivity for boom pole lowering
Your boom won’t go BOOM on the roof of a visitor’s car. The SECTOR II
will detect any obstruction, so you’re safe – and won’t have to fill out any
of those pesky insurance forms.
It stores up to 500 transmitter buttons, and amongst other access control features, it provides the
ability to selectively add and delete transmitter buttons saved into its memory.
2. CENTURION code-hopping
SECTOR II CONTROLLER FEATURES
Hardware features
Robust, durable and slimline operator casing
The SECTOR II is available in three stylish and modern colour configurations to suit your aesthetic requirements.
Enquire at your local CENTURION agent.
Our slim SECTOR II looks particularly fetching – and epoxy-coating, in
a highly visible ‘traffic yellow’, keeps it safe from drivers with terrible
eyesight while improved torsional rigidity makes the SECTOR II even
stronger in windy conditions.
Available with different levels of corrosion protection for inland, coastal
plains, and marine environments1. The mild steel model positively shrugs
off the elements thanks to its tough pre-galvanised enclosure.
1. Refer to barrier housing specifications on the back page.
Easy access to electronics
It’s so easy and comfortable to set up the SECTOR II’s many advanced
features thanks to the clever, ergonomic design of the housing, with the
electronic assembly at the top of the operator at the perfect working
height.
When size matters
Yellow
White
Metallic Silver1
1. A price premium applies for the metallic finish.
Whether closing off an entrance from as narrow as three metres to as
wide as six metres, there is a SECTOR II model to suit. Fit the optional
jack-knife and your SECTOR II can even be fitted in areas with limited
headroom.
• Fully-sealed plastic housing for controller to prevent ingress
of dirt and insects
• Easy setup of controller using LCD user interface
• Removable connectors on controller for easy maintenance
• Watchdog IC ensures full and safe operation of controller
• Optional Backup Memory Module allows backing up of all
the information that has been set up in the system
• The SECTOR II is available in three stylish and modern
colour configurations to suit your aesthetic requirements.
Enquire at your local CENTURION agent
• Adjustable and removable controller mounting tray for easy
wiring and commissioning
Electronic features
• Barrier raise and lower inputs
• Memory and non-memory barrier activation
• Onboard multichannel CENTURION code-hopping receiver
with the ability to:
• Learn transmitter buttons to specific functions (e.g. Barrier
Raise, Barrier Lower, etc.)
• Selectively delete specific transmitters that have been lost
or stolen
1.
2.
3.
4.
Inductive loop detector or infrared beams must be fitted
Remote LED must be fitted
An external pillar light must be connected to enable this feature
An external light must be connected to enable this feature
•
•
•
•
•
•
•
•
•
•
•
•
• Automatically learn transmitters (Autolearn) and
automatically delete transmitters that are no longer in
use (Delete-Not-Present)
Full configuration of barrier operating parameters including
independent pole raise and lowering speeds, ramp-up and
ramp-down angles
Full configuration of barrier operating parameters including
independent pole raise and lowering speeds, ramp-up and
ramp-down angles
Automatic closing
Multiple Operating Profiles to suit region – select between
ZA, CE, etc.
Multichannel controller with integrated ChronoGuard timer
technology (a world first)
Free-exit facility1
Remote boom pole status indicator2 (pole position, power
failure, low battery, multiple collision detection and security
light status indication)
Courtesy / Pillar Light Timer with adjustable duration3
Fully configurable pre-delays with multi-modal pre-flash4
Safety / Closing beam input with beam functional test5
Lock / Emergency stop input6
Ticket Vend Interlock7.
5. Infrared safety beams or equivalent detection device must be fitted
6. To use this feature, a normally closed emergency stop pushbutton must be fitted
7. This feature enables connectivity to a ticket vending machine
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement