2016 Full Metalworking Catalog

2016 Full Metalworking Catalog
Metalworking Tools
Surface Preparation Tools & Dust Collection Vacuums
CS Unitec's Trelawny™ line of surface preparation tools features many Vibro-Lo™ models.
These models include integrated vibration reduction technology to operate with 7x less vibration
than standard models. Vibration damping components offset the hammer vibration when the
tool impacts the workpiece, reducing the risk of vibration-related injury.
Vibration
Reduction
Technology
Hand-Held Scarifiers – Rotopeen™ (Pneumatic • Electric) p. 4
• Ideal alternative to small-area shot blasting
• Available with 3M's Rotopeen™ 'C' flaps, star cutters and beam cutters
Hand-Held Scaling Hammers (Pneumatic • Electric) p. 5
• Single-Head and Triple-Head
• Remove think scale, heavy corrosion, hard coatings and more
Needle and Chisel Scalers (Pneumatic • Electric) p.6-12
• Remove coatings, corrosion and other accumulated materials
• ATEX-Certified needle scalers for use in ex Zones and hazardous environments
Floor Scarifiers (Electric • Pneumatic • Gas) p.14-15
• Available with 8" and 10" cutting widths
• Ideal for the most demanding surface prep & material removal applications
Long-Reach Chisels / Scrapers / Scalers (Pneumatic) p.16
• Available lengths ranging from 2' to 6'; chip, scrape and
descale with one tool
Low-Vibration Steel Deck Hammer (Pneumatic) p.17
• Fracture and reduce scale, corrosion and thick coatings in
minutes, reducing blast media costs
Trident Neptune Flexible Shaft Deck Descalers (Air • Electric) p.18
• Rapidly remove scale, rust, paint and other unwanted deposits on
ship decks and other metal surfaces
Hydraflex hold Cleaning Gun Kit (Pneumatic) p.18
• Reach up to 100 ft. away with high-pressure water jet
• Clean hold areas on bulk carriers and cargo vessels of all sizes
Dust Collection Vacuums (Electric • Pneumatic) p.19
• Electric-powered wet/dry models with HEPA filtration
• Air-powered models are ATEX classfied to collect dust/debris and
non-flammable liquids. Optional HEPA filtration available.
Surface Preparation Tools & Dust Collection Vacuums
Hand-Held Scarifiers
Hand-Held Scaling Hammers
Needle/Chisel Scalers
Heavy Duty Needle/Chisel Scalers
Low-Vibration Pneumatic Needle Scalers
Low-Vibration Pneumatic Chisel Scalers
ATEX Needle Scaler Kits
Electric Needle Scalers
Needles
2
•
p. 4
p. 5
Floor Scarifiers
p. 14-15
Long-Reach Chisels / Scrapers / Scalers
p. 16
Low-Vibration Steel Deck Hammer
p. 17
Trident Neptune Flexible Shaft Deck Descalers
p. 18
Hydraflex Hold Cleaning Gun Kit
p. 18
Dust Collection Vacuums
p. 19
p. 6-7
p. 8-9
p. 8,10
p. 11
p. 12
p. 13
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Metalworking Tools
Drilling, Reaming, Driving, Sawing, Finishing & More
Portable Magnetic Drills (Electric • Air • Hydraulic) p. 20-23
• Cut holes up to 5-1/8" dia.
• Tap, twist drill, ream and countersink
Annular Cutters p. 24-25
• Achieve burr-free finished holes
• HSS, TCT Carbide and more
Reamers, Drills & Drive Units p. 26
• Bridge reaming and heavy-duty drilling
• Tube rolling & expanding, valve turning and more
Portable Beveling Machines p. 27
• Bevel, deburr and chamfer
• 15˚-60˚ or 2.5mm radius
Dry Cutting Circular Saws (Electric • Air) p. 28-31
• Burr-free cutting of metal plates, pipe and more
• Models up to 14"
Reciprocating Saws (Air • Hydraulic) p. 32-33
• Hand-held or clamp-on cutting
• Cut pipe, steel, bolts, nails and more
Portable Band Saws p. 34
• Air, electric and hydraulic models
• Cold-cutting of pipe up to 8-1/2" dia.
Portable Hacksaws p. 35
• Air, electric and hydraulic models
• Cold-cutting of large pipe to 30" dia.
Chain Saws p. 37
• Cut wood, plastic and more
• Bar lengths of 10" to 25"
Pipe Cutting Machine p. 36
• Cut pipe up to 63" dia.
• Hydraulic and pneumatic models
Underwater / Subsea Tools p. 38
• Hydraulic and pneumatic
• Impact wrenches, hammer
drills and more
Linear & Angle Grinders p. 40
• Finishes from shadow-free matte to mirror polish
• Remove welds, deep scratches, rust and more
Axial Fans & Air Movers p. 39
• Air, electric, explosion-proof
• Ventilate, exhaust and cool
Portable Deburring Machines p. 42-43
• Deburr metal sheets, frame constructions and more
• Bevel angles between 30˚ and 60˚
Pipe Sanders (Electric • Air) p. 41
• Sand and polish pipe to 14" dia.
• Open and closed pipe constructions
Drilling, Reaming, Driving, Sawing, Finishing Tools and More
Portable Magnetic Drills
Annular Cutters
Reamers, Drills & Drive Units
Portable Beveling Machines
Dry Cutting Circular Saws
Portable Reciprocating Saws
AirPac Dryer / Cleaner
Hydraulic Power Unit
Portable Band Saws
p. 20-23
p. 24-25
p. 26
p. 27
p. 28-31
p. 32-33
p. 33
p. 33
p. 34
•
1-800-700-5919
Portable Power Hacksaws
Pipe Cutting Machine
Chain Saws
Underwater / Subsea Tools
Axial Fans and Air Movers
Linear and Angle Grinders
Pipe Sanders
Metal Deburring Machines
•
Visit our Web site at www.csunitec.com
p. 35
p. 36
p. 37
p. 38
p. 39
p. 40
p. 41
p. 42-43
3
Hand-Held Scarifiers - Rotopeen™
Air • Electric
Peening Preparation Tool (PPT) – ideal
alternative to small-area shot blasting
CS Unitec's Trelawny™ Rotopeen™ hand-held scarifiers are the ideal alternative to small-area shot blasting for
cleaning and preparing steel and concrete surfaces.
They utilize 3M's brand of Rotopeen™ 'C' flaps to offer a captive shot method of surface preparation.
• Pneumatic and electric models
• Integrated dust shroud for dust and
debris collection, as well as cleaner,
safer removal of lead-based paints
and contaminated particles
Air Models
194.0405 and
194.C405,
4" cutting width
Applications include:
• Aggressive removal
of alkyds, adhesives,
lead-based paints,
mastics, coatings
corrosion & more
• Cleaning & preparing
steel and concrete
surfaces
Hand-Held
Scarifier
Accessories
Above: Ergonomic rubber hand
grip standard on all new 2" and 4"
models. Provides grip for easier
pushing along material.
Optional Accessory
Left: Optional top handle attachment
kit to replace rubber grip on 2" and 4"
models. (P/N 312.Q450)
See page 19 for dust
extraction systems.
Star Cutter
Beam Cutter
P/N 312.S200
Aggressive removal
of thick coatings
P/N 312.R200
Removal of hard coatings, less
aggressive than star cutter
3M™ Rotopeen™ 'C' Flap
P/N 312.MRPC
Removal of paint and
rust to bare metal finish
HEAVY SCALING
SURFACE PROFILING
––––
––––
Radioactive waste removal/capture
Ships decks
Non-slip coatings
––––
General paint removal
Construction
Plaster removal
Ceiling / wall paint removal
Ceiling / wall paint removal
––––
Floor marking removal
Floor marking removal
Adhesive removal
Adhesive removal
––––
Sealant removal
––––
Paint / sealant removal
––––
––––
Protective coating removal
Nuclear
Factory Floors
Swimming Pools
Bridge Maintenance
Pipeline Maintenance
Star Cutter
Cutting
Width
Quantity
Required
2"
4"
80
160
Beam Cutter
Cutting
Width
Quantity
Required
2"
4"
56
112
Rotopeen™
'C' Flap
Cutting
Width
Quantity
Required
2"
4"
6
12
Pneumatic Hand-Held Scarifiers
Model
Number
CFM @
90 PSI
Speed
(RPM)
Cutting
Width
Cutting
Media
194.0205
194.C205
194.0405
194.C405
30
30
30
30
2700
2700
2700
2700
2"
2"
4"
4"
'C' Flaps
Star Cutters
'C' Flaps
Star Cutters
Weight
(lbs.)
7.5
11.5
9
13.25
Vibration
Levels m/s2
3.5
6.0
3.1
4.6
These models are compatible
with Star Cutters, Beam Cutters
and Rotopeen™ 'C' Flaps
Electric Hand-Held Scarifiers
Model
Number
195.1217
195.1220
195.1417
4
Motor Speed
Power (RPM)
110V
220V
110V
Cutting Cutting
Width Media
2000
2000
2000
2"
2"
4"
•
Weight Vibration
(lbs.) Levels m/s2
'C' Flaps
11
3.6
'C' Flaps
11
3.6
'C' Flaps
12
5.2
1-800-700-5919
•
Electric Model
195.1220
2" cutting width
with Rotopeen™
'C' flaps. 4" width
also available.
Visit our Web site at www.csunitec.com
Pneumatic Hand-Held Scaling Hammers
Vibration
Reduction
Technology
Remove thick scale, heavy
corrosion and hard coatings
CS Unitec's Trelawny™ line of pneumatic hand-held
scaling hammers are ideal tools for the removal of
thick scale, heavy corrosion and hard coatings. Areas
of application include pipes, ship decks, oil platforms,
storage tanks and bridge structures.
• Single-head scaling hammer includes Vibro-Lo™ vibration
reduction technology
• Optional spark-resistant copper beryllium replacement heads
reduce risk of explosion in potentially hazardous areas
• Detachable taper fit cutter head reduces cost of replacement and extends piston life
Pneumatic
Applications Include:
• Pipes • Ship Decks • Oil Platforms
• Storage Tanks • Bridge Structures
• Gas / Utility Contractors
Pneumatic Hand-Held Scaling Hammers
• Air consumption – 7 CFM @ 90 PSI
• Noise level – 88.1 db(A)
Description
Model
Number
Handle Dimensions
Vibration
Weight
Type
(LxH)
Levels (m/s2) (lbs.)
SF1 Single Head – 3000 Blows per minute
TCT Cruciform Piston
151.5100
Long
19" x 6"
6.8
5
TCT Cruciform Piston
199.5150
Short
9.25 x 6"
6.8
4.5
3.7
5
TCT Bush Hammer Piston
CuBe Cruciform Piston
151.5105
151.5110
Long
Long
19" x 6"
19" x 6"
6.8
6.8
5
5
VLSF1 Low-Vibration Single Head – 3000 Blows per minute
TCT Cruciform Piston
CuBe Cruciform Piston
196.5095
196.5110
Long
Long
19" x 5.5"
19" x 5.5"
3.7
5
SF3 Triple Head – 9000 Blows per minute
TCT Cruciform Piston
153.5300
Long
19" x 6"
13.4
8
TCT Cruciform Piston
199.5350
Short
9.25 x 6"
13.4
7
TCT Bush Hammer Piston
CuBe Cruciform Piston
153.5305
153.5310
Long
Long
19" x 6"
19" x 6"
13.4
13.4
8
8
CS Unitec's
Trelawny™ SingleHead Hand-Held
scaler operates with
7x less vibration than
standard models.
This tool utilizes
vibration damping
components to offset
the hammer vibration
created when the
head impacts the
workpiece.
Hand-Held Scaling Hammer Accessories
Bush
Cruciform
•
Part No.
For Model Numbers
TCT Cruciform Cutter Head
426.5351
151.5100, 196.5095 and 153.5300
Copper Beryllium (CuBe)
Cruciform Cutter Head
606.5303
151.5110 and 153.531
TCT Bush Cutter Head
426.5352
151.5105 and 153.5305
Common Tapered Piston
612.5301
All models shown above
1-800-700-5919
•
Visit our Web site at www.csunitec.com
5
Heavy-Duty Needle Scalers
Heavy-Duty Needle Scalers
Ideal for cleaning and stress-relieving weld seams and joints; texturing concrete;
removing coatings, corrosion and other accumulated materials.
Power & Productivity
• Oversized piston with longer stroke
• Heavy-duty hardened anvil
• Chisel-tipped needles
Low Maintenance & Less Downtime
• Air-powered – fewer moving parts
• Converts to chisel scaler in seconds
• Piston valve
Versatile
• One tool for different applications
• Lightweight – easy to handle
Inline Grip
1B
3B
Pistol
3BPG
Pistol Grip
Blows
Model
Needle Weight
per
CFM @
Number Qty./Dia. (lbs.) minute 90 PSI
Noise Vibration
Level
Levels
db(A)
m/s2
1B Needle Scaler
111.1099 12 / 3mm
3.5
3800
3.0
110.4
8.5
2B Needle Scaler
121.2099 19 / 3mm
5.75
3000
5.5
113.3
9.3
2BPG Needle Scaler 123.2199 19 / 3mm
5.75
3000
5.5
113.3
12.6
3BPG Needle Scaler 133.3199 28 / 3mm
8.25
2200
8.0
114.5
18.9
131.3099 28 / 3mm
10
2200
8.0
114.5
12.2
141.4099 35 / 4mm
12.5
1800
8.5
117.4
23.5
Description
Inline
See next page for
more information.
2BPG
4B
Grip
2B Combination Kit
2B
Semi Pistol Grip
Semi 3B Needle Scaler
Pistol 4B Needle Scaler
Dust Collection Shroud for Standard Needle Scalers
Optional Dust Shroud for Needle Scalers – for use with dust extraction vacuums.
Model 2B and 2BPG Needle Scalers – Order Dust Shroud P/N 418.2199
Model 3BPG Needle Scaler – Order Dust Shroud P/N 418.3039
See page 13 for
needles:
Chisel for light
surface marking
Flat for light treatment
and polishing effect
Pointed for very
hard scale
Copper Beryllium
for use in potentially
explosive areas
Stainless Steel for use
in applications where
corrosion or humidity is
a problem, such
as the food
processing industry
TVS™ Needle Scalers with Integrated Vacuum Shroud
CS Unitec's Trelawny™ TVS™ Needle Scalers with Integrated Vacuum
Shroud enable dust-free working in hazardous applications when used
with a dust extraction vacuum (see page 19 for dust collection systems).
Grip
Inline
Pistol
6
Description
2B Needle Scaler
Blows
Model Weight
per
CFM @
Number (lbs.) minute 90 PSI
139.2007 6.4
3000
5.5
2BPG Needle Scaler 139.2107
3BPG Needle Scaler 139.3107
•
6.6
9.9
1-800-700-5919
3000
2200
•
5.5
8.0
Noise
Level
db(A)
98.6
Vibration
Levels
m/s2
17.4
98.6
105.1
22.4
19.9
Visit our Web site at www.csunitec.com
Heavy-Duty Chisel Scalers
Heavy-Duty Chisel Scalers
Ideal for splitting, chipping, pointing, brick raking and removing
accumulated materials and corrosion.
• Inline, pistol and semi-pistol grip
• Ball bearing chisel retainer
Blows
Model Weight
per
CFM @
Grip
Description
Number (lbs.) minute 90 PSI
Noise Vibration
Level
Levels
db(A)
m/s2
1B Chisel Scaler
114.1200
3.3
3800
3.0
98.9
8.2
2B Chisel Scaler
124.2200
4.4
3000
5.5
98.6
17.4
2BPG Chisel Scaler 125.2300
4.5
3000
5.5
98.6
22.4
Pistol 3BPG Chisel Scaler 135.3300
3BPG Chisel Scaler* 135.3395
6.2
6.2
2200
2200
8.0
8.0
105.1
105.1
25.6
25.6
Semi 3B Chisel Scaler
Pistol 4B Chisel Scaler
134.3200
7.5
2200
8.0
105.1
19.9
144.4200
8.2
1800
8.5
105.1
45.2
Inline
* 3BPG Chisel Scaler 135.3395 has 5/8" hexagonal chisel holder and is compatible with chisels shown on page 16.
All others Chisel Scalers shown above have 1/2" square connection.
2B Combination Kit
Inline Grip
1B
2B
3B
Kit includes 2B Needle Scaler,
19 (3mm) needles, 3/4" width
chisel and allen wrench.
P/N 199.3120
2BPG
3BPG
4B
Semi Pistol Grip
Pistol Grip
Chisels for Standard Chisel Scalers
1/2" Square Connection
Chisel Part No. Shank
704.1110
Square
7"
2"
704.2105
Square
Cranked End
7"
3/8"
Application
Spark-resistant
Aluminum Bronze
for use in hazardous areas
Weld fl ux and thick coating removal
704.1101
Square
7"
3/4"
Weld splatter removal
704.1103
Square
7"
2-1/2"
704.1107
Square
10"
3/4"
Flat chisel for weld splatter
and sand cast cleaning
704.1106
Square
8"
1/4"
Mortar removal for repointing
brick work
704.1112
Square
7"
•
Length
Width
Wide fl at chisel for the removal of rust or peeling paint
Moil Point Concrete chipping
1-800-700-5919
•
CS Unitec offers a full
line of non-sparking,
non-magnetic chisels
and safety hand tools
for hazardous areas
and Ex zones. Contact
us for details.
Standard Needle Scalers
and Chisel Scalers convert
in seconds with optional
head or when purchased
as a Kit. Contact us for
more information.
Visit our Web site at www.csunitec.com
7
Low-Vibration Needle/Chisel Scalers
Vibration
Reduction
Technology
High power with low vibration –
equipped with Vibro-Lo™
CS Unitec's Trelawny™ line of Low-Vibration needle/
chisel scalers offer high performance and low vibration
for greater productivity and improved operator comfort.
Ergonomically designed with low maintenance and quick
change tooling option.
• Integrated Vibro-Lo™ vibration reduction technology
• Lightweight, easy to handle
• Optional dust shroud for dust and debris collection
• Tool-free needle changeover
• Converts to chisel scaler in seconds
VL223
CS Unitec's Trelawny™ VibroLo™ line of Needle/Chisel
Scalers operate with 7x less
vibration than standard
models. These tools utilize
vibration damping components
to offset the hammer vibration
created when the needles/
chisels impact the workpiece.
VL203
VL303
ATEX-Certified Needle Scalers
available for hazardous
environments and Ex Zones.
See page 11 for details.
Needle Scalers and
Chisel Scalers convert
in seconds with optional
head or when purchased
as a Kit. See page 10 for
Kit information.
8
Applications include:
• Cleaning and stress-relieving
weld seams and joints
• Removing coatings, corrosion
and other accumulated materials
• Texturing concrete
• Splitting, chipping, pointing and brick raking
Dust Collection
Shroud
Pneumatic Hand-Held
Scaling
Hammers
Heavy-Duty
Low-Vibration
Needle
Scalers
Vibration
Reduction
Technology
Heavy-Duty Vibro-Lo™ Needle Scalers
• Inline or pistol grip
• Remove coatings, corrosion and other accumulated materials
• Ideal for stress-relieving weld seams and joints
VL223
VL203
VL303
Needle Scalers and
Chisel Scalers convert
in seconds with optional
head or when purchased
as a Kit. See page 10 for
Kit information.
Grip
Inline
Pistol
Needle
Blows
CFM @
Model Quantity/ Weight
per
Number Diameter (lbs.) minute 90 PSI
Description
Noise
Level
db(A)
Vibration
Levels
m/s2
VL223 Needle Scaler 199.2103
19 / 3mm
5.25
2400
4
90.7
2.56
VL223 Needle Scaler 139.2103
with dust shroud
19 / 3mm
5.25
2400
4
90.7
2.56
VL203 Needle Scaler 199.2003
19 / 3mm
6
2400
4
90.7
2.75
VL203 Needle Scaler 199.2303
with dust shroud
19 / 3mm
6
2400
4
90.7
2.75
VL303 Needle Scaler 199.3003
28 / 3mm
7.75
3000
5.5
109.5
2.3
VL303 Needle Scaler 199.3005
with dust shroud
28 / 3mm
7.75
3000
5.5
109.5
2.3
Dust Collection Shroud for Vibro-Lo™ Needle Scalers
See page 13 for the
following types of
needles:
Chisel for light
surface marking
Flat for light treatment
and polishing effect
Pointed for very
hard scale
Copper Beryllium
for use in potentially
explosive areas
Stainless Steel for use
in applications where
corrosion or humidity
is a problem, such as
the food processing
industry
Drop Protection Kit
CS Unitec offers a drop
protection kit for our
Vibro-Lo™ Needle/
Chisel Scalers. Protect
your investment when
working at heights or in
applications where dropping/ losing
the tool is likely, including: offshore
platforms and rigs, bridges/
scaffolding, vessels and ships.
Optional Dust Shroud for Needle Scalers –
for use with dust extraction vacuums.
Model VL223 Needle Scaler – Order Dust Shroud P/N 418.2003
Model VL203 Needle Scaler – Order Dust Shroud P/N 418.2003
Model VL303 Needle Scaler – Order Dust Shroud P/N 418.3003
•
1-800-700-5919
•
For VL223 and VL203
Order P/N 720.2003*
For VL303
Order P/N 720.3003*
See page 19 for dust
extraction systems.
* Safety clip and line not supplied
Visit our Web site at www.csunitec.com
9
Heavy-Duty Low-Vibration Chisel Scalers
Vibration
Reduction
Technology
Heavy-Duty Vibro-Lo™ Chisel Scalers
Description
Grip
Blows
Noise Vibration
Model Weight
per
CFM @ Level Levels
Number (lbs.) minute 90 PSI db(A)
m/s2
Inline VL223 Chisel Scaler 199.2213
Pistol
6.5
2400
4
76.3
3.69
VL203 Chisel Scaler 199.2203
7
2400
4
76.3
3.33
VL303 Chisel Scaler 199.3203
9.5
3000
5.5
78.2
3.7
VL223
VL203
VL303
Chisels for Vibro-Lo™ Chisel Scalers
Chisel Part
Number
Shank
704.3110
Square
7"
2"
704.3205
Square
Cranked End
7"
3/8"
Weld flux and thick coating removal
704.3101
Square
7"
3/4"
Weld splatter removal
704.3103
Square
7"
2-1/2"
Wide flat chisel for
the removal of rust
or peeling paint
704.3107
Square
10"
3/4"
Flat chisel for weld
splatter and sand
cast cleaning
Length Width Application
Spark resistant
Aluminum Bronze
for use in hazardous
areas
CS Unitec offers a full line of non-sparking,
non-magnetic chisels and safety hand tools
for hazardous areas and Ex zones.
Contact us for details.
Vibro-Lo™ Needle/ Chisel Scaler Kits
CS Unitec offers Vibro-Lo™ Needle/Chisel Scaler Kits,
each supplied with the Needle Scaler, 3mm needles, a
chisel holder, anvil and a 3/4" blade chisel.
VL223 Kit – Order P/N 199.2113
VL203 Kit – Order P/N 199.2105
VL303 Kit – Order P/N 199.3103
VL203 Kit –
Plastic carrying
case included.
VL223 Kit and VL303 Kit do not include a plastic carrying case.
10
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
ATEX-Certified Needle Scaler Kits
Vibration
Reduction
Technology
Specially-designed for use in hazardous environments –
equipped with Vibro-Lo™ low vibration technology
These specially engineered Trelawny VL203Ex, VL223Ex and
VL303Ex needle scalers are:
• Fully certifi ed to the classifi cation: EX II 2Gc IIA T4 under the European Directive 94/9/EC
• Ideal for use in oil, gas & petrochemical industries
such as refi neries, offshore platforms, LPG terminals and all chemical processing environments.
For use in hazardous
environments and
ATEX and Ex Zones
ATEX Certified
Grip
Inline
Pistol
Needle
Model Quantity/
Number Diameter
Description
Weight
(lbs.)
Blows
per
minute
CFM @
90 PSI
Noise
Level
db(A)
Vibration
Levels
m/s2
VL223Ex Needle Scaler
with dust shroud
139.2423
19 / 3mm
5.25
2400
4
90.7
2.56
VL203Ex Needle Scaler
with dust shroud
139.2403
19 / 3mm
6
2400
4
90.7
2.75
VL303Ex Needle Scaler
with dust shroud
139.2433
28 / 3mm
7.75
3000
5
109.5
2.3
VL223Ex
VL203Ex
Standard Features
VL303Ex
Kit includes ATEX-Certified needle scaler,
extra set of Copper Beryllium needles,
dust shroud, corner cuff, edge cuff, flat
cuff and fall arrestor.
Copper Beryllium needles –
high strength with nonsparking and non-magnetic
properties
Optional
Accessory
Dust shroud to protect
user from hazardous dust
and debris
Anti-static lanyard
available for use with
the fall arrestor
(P/N 415.3003)
Fall arrestor eliminates
the risk of dropping the
tool causing injury or
equipment damage
Non-Sparking, Non-Magnetic
Safety Hand Tools
CS Unitec offers a complete line of
high-quality safety hand tools for
use in Ex Zones, ATEX Zones and
hazardous environments where
hazardous, flammable or combustible
vapors, liquids, dusts or residues may
be present. Contact us for more
Vibro-Lo™ technology
operates with 7x less
vibration than standard
models.
information!
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
11
Electric Needle Scaler –
Low-Vibration
Lightweight and slim design for tight
areas – equipped with Vibro-Lo™
CS Unitec's Electric Low-Vibration needle scaler offers a
powerful motor and low vibration for greater productivity
and operator comfort. Optional accessories convert needle
scaler to chisel scaler or bush hammering tool.
• Integrated Vibro-Lo™ vibration reduction technology
• Lightweight, easy to handle
• Optional dust shroud for dust collection vacuum
• Converts to chisel scaler in seconds
• Optional Bush Hammer Head converts needle scaler to hammering tool
CS Unitec's Electric Needle and Chisel Scalers operate with 7x
less vibration than standard models. These tools utilize vibration
damping components to offset the hammer vibration created
when the needles/chisels impact the workpiece.
Electric Vibro-Lo™ Needle Scaler
Model
Number
Needle
Quantity/
Diameter
Weight
(lbs.)
Blows
per
minute
Power
8.15
3000
110 V, 650 Watts, 60Hz
VL219E Needle Scaler
196.6002
196.6004
19 / 3mm
19 / 3mm
8.15
3000
230 V, 650 Watts, 50Hz
Optional Accessories
Needles
Chisel Kit – P/N 419.6610
Converts VL219E into a
chisel scaler
Flat
19 needles (5" long x 3mm dia.) – P/N 443.1115
Box of 1000 needles (5" long x 3mm dia.) – P/N 443.1105
Bush Hammer Head Kit –
P/N 415.6610
Converts VL219E into a
Bush Hammer tool
Chisels
Bush Hammer Head –
P/N 612.6600
See page 10 for the following types of chisels:
Square Cranked End for weld fl ux and thick coating removal
Square (3/4" wide) for weld splatter removal
Square (2-1/2" wide) for removal of rust or peeling paint
Square (3/4" wide) for weld splatter and sand cast cleaning
Dust Shroud –
P/N 418.6100
For use with dust
extraction vacuums
See page 19 for dust
extraction systems.
12
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Vibration
Reduction
Technology
Needles
CS Unitec's Trelawny™ needles last 10x longer than standard
needles. Save time and money with fewer needle changes and
less downtime.
All of CS Unitec's Needle Scalers are delivered from stock complete
with 180mm long x 3mm diameter chisel tipped high performance
needles. Other needle holders are available as accessories for use
with 2mm and 4mm diameter needles. We also offer spark resistant
needles for use in potentially hazardous areas and Ex zones, as well as stainless steel needles for use
in humid areas - such as applications in the food processing industry - where corrosion is a concern.
Standard pack set is one carton of 6 sets. Some models are packed as an individual set in a box.
Boxes of 100 qty. needles in a durable, reusable plastic container are available, as well as larger
quantities.
Chisel Tip
Pointed Tip
These needles will clean the same
materials as a pointed tip, but will leave
light surface marking
Sharpened to a conical point, these are
the most effective in breaking through
very hard scale on materials where some
surface indentation is permissible - or where a
roughening or keying of the surface is actually
desirable.
Size
3mm
3mm
3mm
3mm
3mm
Description
6 x sets of 12 needles
6 x sets of 19 needles
6 x sets of 28 needles
Box of 100 needles
Box of 1000 needles
Part #
413.2112
413.2119
413.2128
453.2110
443.2107
Flat Tip
Flat-tipped needles will reduce marking
on metal surfaces and can give a
polishing effect. For use on thin gauge
metals and any surface where a light
treatment is required.
2mm needles used on a welded joint produce a similar
effect to shot peening, reducing stress in the weld.
Size
2mm
2mm
2mm
2mm
2mm
3mm
3mm
3mm
3mm
4mm
4mm
4mm
4mm
3mm
3mm
Description
6 x sets of 29 needles
6 x sets of 51 needles
6 x sets of 65 needles
Box of 100 needles
Box of 2000 needles
6 x sets of 19 needles
6 x sets of 28 needles
Box of 100 needles
Box of 1000 needles
(180mm long)
6 x sets of 19 needles
6 x sets of 35 needles
Box of 50 needles
Box of 500 needles
Box of 1000 needles
5" long (127mm)
19 x needles
5" long (127mm)
•
Part #
412.1129
412.1151
412.1165
452.1110
442.1107
413.1119
413.1128
453.1110
443.1107
414.1119
414.1135
454.1105
444.1107
443.1105
443.1115
Size
3mm
3mm
3mm
3mm
3mm
4mm
4mm
4mm
4mm
6 x sets of 19 needles
6 x sets of 28 needles
6 x sets of 49 needles
Box of 100 needles
Box of 1000 needles
6 x sets of 19 needles
6 x sets of 35 needles
Box of 50 needles
Box of 500 needles
Part #
413.3119
413.3128
413.3149
453.3110
443.3107
414.3119
414.3135
454.3105
444.3107
See page 19 for
dust extraction
systems.
Conversions:
2mm = 0.08"
3mm = 0.12"
4mm = 0.16"
180mm = 7"
Spark-Resistant Copper Beryllium
Available in 3mm flat tip only; for use in potentially
hazardous areas.
Size
3mm
3mm
3mm
3mm
3mm
3mm
Description
Box of 12 needles
Box of 19 needles
Box of 28 needles
Box of 49 needles
Box of 100 needles
Box of 500 needles
Part #
403.1312
403.1319
403.1328
403.1349
453.1310
443.1307
Stainless Steel
Available in 3mm flat tip form only, to be used in
applications such as refurbishment of food processing
machinery or areas of high humidity where the corrosive
effect on needles would be prohibitive.
Used on decorative concrete surfaces where contamination of the
surface from carbon steel needle is undesirable.
Size
3mm
3mm
1-800-700-5919
Description
•
Description
Box of 100 needles
Box of 500 needles
Part #
453.1207
443.1207
Visit our Web site at www.csunitec.com
13
Floor Scarifiers
Gas • Electric • Pneumatic
Remove rust, scale, paint, adhesives
and more from steel and concrete
CS Unitec's Trelawny™ Floor Scarifiers tackle the most demanding surface preparation and material removal applications. Ideal for the
removal of coatings and corrosion from steel and concrete surfaces
to prepare for re-coating. Produce an ideal keyed or grooved profile on concrete for waterproofing and non-slip surface applications. • Depth control maximizes performance and extends cutter life
• Integrated vacuum connection and hold-to-run handle
• Fully adjustable handlebar for operator comfort
• Electric, pneumatic or gas power
Applications include:
• Removal of rust,
scale, paint,
adhesives and more
• Keyed or
grooved profiles
• Roughing concrete
Cutter Applications:
Individual
Cutter
Cutters/Spacers
Required
Per Drum
Drum
Assembly
Wire Brushes
N/A
N/A
320.9620
Beam Cutters
320.5120
226 Pieces
320.1020SB
Star Cutters
320.3658
208 Pieces
320.1020SS
TCT Cutters
and Spacers
320.5500
320.4140
80 Pieces
88 Pieces
320.1020ST
Milling Cutters (22mm)
320.5600
24 Pieces
320.1020SM
TCT Cutters (for grooving) 320.5500
320.4140
and Spacers
24 Pieces
232 Pieces
320.002G
TFP 200 Cutters
TFP 200 Floor Scarifiers
Model Number
TFP 200
Gas
TFP 200
Pneumatic
TFP 200
Electric
Wire Brushes are
ideal for finish cleaning and polishing on steel;
can be used for light
concrete deposit.
Beam Cutters are ideal
for light paint/corrosion
removal, with minimal
damage to substrate.
Star Cutters are ideal
for the removal of mastics and rubberized coatings.
Tungsten Carbide Tipped (TCT) Cutters are ideal for
aggressive applications such as roughing concrete and
heavy corrosion removal, as well as grooving roadways
for non-slip surface.
Milling Cutters are ideal for the removal of plastic road
markings without penetrating the surface.
Motor Specifications
Max Cutting
Depth per Pass
Cutting
Width
Dimensions
(WxLxH)
Weight
(lbs.)
230V, 50/60 Hz, 1 Phase, 3 HP
1/8"
8"
14" x 35" x 35"
149
165CFM @ 90 PSI, 3.5 HP
1/8"
8"
14" x 35" x 35"
99
Honda GX160 Gas, 5.5 HP
1/8"
8"
14" x 35" x 35"
130
TFP 200 Electric
320.2004T
TFP 200 Pneumatic
320.2012T
TFP 200 Gas
320.2000T
14
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Floor Scarifiers
Gas • Electric
TFP 260 floor scarifier with 10" cutting
width for medium to large jobs
Remove coatings and corrosion from steel and concrete
surfaces to prepare for re-coating. Level and remove hard
materials. Remove painted lines.
• Depth control maximizes performance and
extends cutter life
• Integrated vacuum connection for dustfree operation
• Quick-lift drum lever for operator control
• Gas or electric power
Ideal for grooving
concrete surfaces
Individual
Cutter
Cutters/Spacers
Required
Per Drum
Drum
Assembly
Beam Cutters
326.5120
332 Pieces
326.1016DB
Star Cutters
326.3658
342 Pieces
326.1016DS
TCT Cutters
and Spacers
320.7009
320.1460
123 Pieces
129 Pieces
326.1016ST
Milling Cutters (16mm)
320.5680
60 Pieces
326.1016DM
TCT Cutters (for grooving)
and Spacers
320.7009
320.1460
36 Pieces
224 Pieces
326.1016GT
TFP 260 Cutters
TFP 260 Floor Scarifiers
Model Number
Max Cutting
Depth per Pass
Motor Specifications
Cutting
Width
Dimensions
(WxLxH)
Weight
(lbs.)
TFP 260 Gas
326.2000T
Honda GX240 Gas, 8 HP
1/4"
10"
17" x 44" x 45"
408
415V, 50/60 Hz,
3-Phase, 7.5 HP
1/4"
10"
17" x 44" x 45"
408
TFP 260 Electric
326.2006T
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
15
Long-Reach Chisels/Scrapers/Scalers
Chip, scrape and descale
with one versatile tool
CS Unitec’s Trelawny™ Long-Reach Scrapers feature one tool with multiple applications.
• Available in 2', 4', 5' and 6' lengths
• Three tools in one – chipper, scraper and descaler
• Quick-change chisel release
• Low air consumption
• Standard and "LITE" models
Applications
• Ice
• Residue
• Adhesive
• Asbestos
• Linoleum
• Carpeting
• Plaster
include removal of:
• Mortar
• Floor tiles
• Metal slag
• Rubber coatings
• Roofing materials
• Chemical spillages
• Bituminous products
Chisel Accessories
Chisel
Chisel Blade
Part No. Length Width
705.1100
9"
705.1101
705.1102
9"
8"
705.1106
705.1112
9"
8"
705.2102
708.1101
8"
1"
Chipping
Applications
Spark-resistant aluminum bronze
for use in hazardous areas
1"
Flat chisel for sand cast chipping
4"
Asphalt cutter / paint removal /
general chipping applications
2"
Removal of linoleum from fl oor base
4"
Spark resistant aluminum bronze
for use in hazardous areas
4"
Floor tile removal
1-1/8"
Brick cleaning and reclamation (use
comb insert with 8" long comb holder 708.1100)
All long-reach scrapers are available as needle
scalers by changing the scraper/chisel with the
needle attachment P/N 415.3532. See page 13
for needles.
Long-Reach Chisels/Scrapers
Description
2ft. Chisel
Standard 4ft. Needle
Scalers 4ft. Chisel
5ft. Chisel
LITE
Scalers
16
Descaling
2"
Needle Scaler Accessories
Model
Scraping
4ft. Chisel
5ft. Chisel
6ft. Chisel
Model
No.
136.3299
137.3400
136.3499
136.3599
136.3497
136.3597
136.3697
•
Blows CFM Noise
Weight
@ 90 Level
per
(lbs.) minute PSI db(A)
8
11
11
12
6.75
7.5
8.5
4.5
4.5
4.5
4.5
2200
2200
2200
2200
4.5
4.5
4.5
2200
2200
2200
1-800-700-5919
•
84
104
84
86
89
89
84
Scraper Accessories
Scraper
Assembly
Part No.
Blade Blade Applications
Pack Width
Flat
439.3504
431.3504 (5 Blades)
431.3508 439.3508
(5 Blades)
431.3512
4"
Adhesive and
paint build up
removal
8"
439.3512
(4 Blades) 12"
Paint and
coating
spillage
removal
Carpet and
tile removal
Beveled
439.3524
431.3904 (5 Blades)
4"
439.3528
431.3908 (5 Blades)
8"
439.3522
431.3912 (4 Blades) 12"
Visit our Web site at www.csunitec.com
Stubborn
adhesive
removal
Carpet and
tile removal
Adhesive
removal
SF11 Steel Deck Hammer
Vibration
Reduction
Technology
11 heads deliver 33,000 BPM
Fracture and reduce scale, corrosion
and thick coatings in minutes – and
reduce blast media costs
CS Unitec's Trelawny™ ScaleForce Eleven Pneumatic Deck
Hammer will fracture and reduce scale, corrosion and thick
coatings in minutes. The machine's low profi le body and adjustable handle mean the deck hammer needs only 6"
clearance for working under pipes and other constructions.
• Includes Vibro-Lo™ vibration reduction technology
• Optional spark resistant beryllium copper replacement heads
to reduce risk of explosion in potentially hazardous areas
• Detachable taper fi t cutter head reduces cost of replacement and extends piston life
• Optional vacuum shroud reduces hazardous and nuisance
dust when used with TVS approved dust collectors
Applications Include:
• Ship Decks
• Tank Bottoms
• Bridge Decks
• Floating Platforms
11 heads provide 33,000 BPM (11 x 3000 BPM)
CS Unitec's Trelawny™
ScaleForce Eleven Pneumatic
Deck Hammer operates with 7x less vibration than
standard models. This tool utilizes vibration damping
components to offset the hammer vibration created
when the heads impact the workpiece.
SF11 Accessories
Part No.
Cruciform Cutter Head
426.5351
Copper Beryllium (CuBe)
Cruciform Cutter Head
606.5303
Bush Cutter Head
426.5352
Common Tapered Piston
612.5301
Vacuum Shroud
437.0100
Cruciform
Bush
Copper Beryllium for use in
potentially explosive areas
Optional dust shroud,
P/N 437.0100, to
collect dust and debris
when connected
to a dust collection
vacuum.
See page 19 for air-powered
dust collection vacuum – ATEX classifi ed for use in Gas Zone 2 and Dust Zone 22.
ScaleForce Eleven (SF11) Pneumatic Deck Hammer
Blows
Cutting
per
Width minute
CFM @
90 PSI
Noise
Level
db(A)
Vibration
Levels
m/s2
33,000
70
113.1
5.76
10"
33,000
70
113.1
5.76
10"
33,000
70
113.1
5.76
Model
Number
Weight
(lbs.)
Dimensions
(WxH)
SF11 w/
Cruciform
Heads
159.5910
79
11.1" x 47.6"
10"
SF11
w/ CuBe
Heads
159.5930
79
11.1" x 47.6"
SF11
w/ Dust
Shroud
159.5912
83
11.1" x 47.6"
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
17
Deck Descalers and Hold Cleaning Gun Kit
Ideal for rapidly removing scale, rust,
paint and other unwanted deposits
CS Unitec's Trelawny™ Trident Neptune Deck Descaler is ideal
for the rapid removal of scale, rust, paint and other unwanted
deposits on ship decks and other metal surfaces, leaving a
receptive surface for priming/painting or coating application.
• Lightweight and portable
• 9' x 5/8" fl exible shaft for wide coverage area
• Motor overheat protection on electric models
• Unique non-corrosive D-coupling with positive locking mechanism
• Two-skid base design keeps unit stable and upright; optional swivel base available
Trident Neptune Deck Descalers
Cutter
Speed Weight
(lbs.)
(RPM)
Model
Motor
Specifications
Model
Number
ISSA
Number
IMPA
Number
Pneumatic
w/ Swivel Base
68 CFM @ 90 PSI
1.5 HP
340.490/S
55.077.00
59 12 81
3000
Electric
w/ Swivel Base
110V / .75 HP
220V / .75 HP
110V / .75 HP
220V / .75 HP
340.TN/50/S
340.TN/100/S
340.TN/S/110
340.TN/S/220
55.077.00
55.077.00
55.077.00
55.077.00
59 12 41
59 12 42
59 12 41
59 12 42
2850
3450
2850
3450
Electric
w/ Skid Base
Dimensions
(LxWxH)
75
106" x 8.3" x 11.4"
75
106" x 8.3" x 11.4"
75
106" x 8.3" x 11.4"
Standard equipment includes: 9' x 5/8" flexible shaft; heavy-duty leaf scaling head; 6-cutter scaling head; 6" dia. power brush, spanner set and hand guard.
Specifically designed for hold cleaning on
bulk carriers and cargo vessels of all sizes
The Hydrafl ex uses a combination of water and compressed air for a powerful, high-pressure jet of water that can reach up to
100 ft. away.
• One-man operation
• Constructed of high-quality, non-corrosive stainless-steel
materials to prevent corrosion
• Adjustable air and water pressure control valve
6
1
2
Hydraflex Hold Cleaning Gun Kit
Air Consumption – 70 CFM @ 90 PSI
Recoil – 10-18 kg
Water Pressure – 85 PSI
Water Hose – 2"
Air Hose – 3/4"
Model
Standard Kit
(includes items 1, 2, 3, 4 & 5)
ISSA No: 55.085.00 IMPA No: 55 07 00
18
•
Hydraflex Hold Cleaning
Gun Accessories
Item
Model
Number
Weight
(lbs.)
342.HY50
42
1-800-700-5919
•
Model
Part No.
1
Gun
342.HY01
2
Tripod
342.HY02
3
Water Hose Coupling
(2-1/2" x 2-1/2")
342.HY03
4
Water Hose Coupling
(2-1/2" x 2")
342.HY04
5
Instantaneous Water
Hose Adapter
342.HY05
6
Ball Valve
342.HY07
Visit our Web site at www.csunitec.com
Dust Collection Vacuums
Electric • Pneumatic
Dust Collection Vacuums with HEPA Filtration
CS Unitec’s dust extraction vacuums offer strong 130 CFM air fl ow and an electromagnetic pulse fi lter cleaning system to maximize vacuum power and dust collection.
• Ideal for use with power tools
• 99.999% HEPA fi ltration effi ciency of particles
down to 0.3 microns; automatic fi lter cleaning • "Power Take Off" outlet activates the vacuum
ON/OFF from the power tool switch
• Non-HEPA models available, 99.930%
fi ltration effi ciency
• Kit available to connect two power
tools (P/N 198804)
"Power
Take Off"
outlet
CS 1225 H
Model CS 1445 H
automatically "pulse"
cleans filters without
interrupting operation!
HEPA Vacuum Specifications
CS 1225 H
Power 11 Amp
Air fl ow 130 CFM Tank capacity 6.6 gal.
Weight 24.3 lbs.
Filter P/N (2pk.) 428956
CS 1500 H CS 1445 H
11 Amp
11 Amp
130 CFM 130 CFM
13 gal.
9 gal.
35.2 lbs.
24.3 lbs.
428956
428956
Activate vacuum
on/off from power
tool controls
Standard Vacuum Specifications
CS 1225
Power 11 Amp
Air fl ow 130 CFM Tank capacity 6.6 gal.
Weight 24.3 lbs.
Filter P/N (2pk.) 416069
CS 1500
CS 1445
11 Amp
11 Amp
130 CFM 130 CFM
13 gal.
9 gal.
35.2 lbs.
24.3 lbs.
416069
416069
Optional Filter Bags
Paper filter bags for CS 1225 and
CS 1445 - P/N 416014 (5-pack)
Plastic filter bags for CS 1225,
CS 1445 and CS 1500 P/N 421742 (5-pack)
Paper filter bags for CS 1500 P/N 416021 (5-pack)
Slurry filter bags for CS 1500 P/N 420592 (3-pack)
CS 1500
We make no claim that use of a vacuum
will eliminate contaminants. Wear an
approved respirator mask and follow all
appropriate OSHA safety regulations
for proper ventilation, dust handling,
eye protection, etc. when using a dust
extraction grinder and vacuum.
Air-Powered Dust Collection Vacuum – KAV 30 AIR
Collection of dry dust/debris and non-flammable liquids
ATEX classified; antistatic vacuum and air-supply hose
• Antistatic vacuum and air supply hose
• ATEX classifi ed Ex II 2 GcT6 for
use in Gas Zone 2 and Dust Zone 22
• Robust stainless steel construction
• Floor tool kit for general cleaning work
• Double fi ltration with optional 14" Permafl ow fi lter
• Optional HEPA fi lter – for collection of hazardous dust
• Disposable paper fi lter or reusable
cloth bag for wet use
•
1-800-700-5919
•
KAV 30 AIR Vacuum Specifications
Dry Model
Wet/Dry Model
303.10KAV30/D 303.10KAV30/WD
CFM @ 90 PSI
Output fl ow Tank capacity
Weight
Paper Filter P/N (10pk.)
HEPA Filter P/N
35
70 CFM 6.8 gal.
32 lbs.
303.1030
303.1060
35
70 CFM
6.8 gal.
32 lbs.
303.1030
303.1060
Visit our Web site at www.csunitec.com
19
Portable Magnetic Drills
Electric • Pneumatic • Hydraulic
Fast, accurate hole cutting… on the job site or in the shop!
CS Unitec's portable magnetic drills are ideal for drilling structural steel
and virtually any metal. We offer a compact, powerful and reliable range
of portable magnetic drills for holes up to 5-1/8" diameter.
Cut up to 5-1/8" • Twist Drill up to 1-3/4" • Tap up to 1-5/8"
Unique features of CS Unitec's portable magnetic drill line:
• Variable-speed, multiple-geared models
• Reversible motors for tapping and machining
• Swivel base stand for hard-to-reach areas
• Manual or automatic feed
• Lightweight – from 24 lbs.
For a comparison chart of our
full line of portable magnetic drills,
see pages 22-23.
AutoMAB 350
ø 1-1/2" cutter capacity
Automatic feed, reverse
and shut-off
NEW!
MAB 1300 V with
Automatic and
Manual Feed
MABasic 200
MAB 1300
ø 1-3/8" cutter capacity
ø 1/2" twist drill capacity
ø 5-1/8" cutter capacity
ø 1-3/4" twist drill capacity
ø 1-5/8" tapping capacity
Reversible, 4-gear motor
The ultimate in power
MAB 525
Twist Drilling
Reaming
ø 2-1/2" cutter capacity
ø 1" twist drill capacity
ø 15/16" tapping
capacity
Reversible, 2-gear
motor
MAB 825 & 845
ø 4" cutter capacity
ø 1-1/4" twist drill capacity
ø 1-1/8" tapping capacity
Swivel base (MAB 845)
Reversible, 4-gear motor
Tapping
Countersinking
20
•
1-800-700-5919
•
MAB 150
ø 1-1/2" cutter capacity
For drilling in tight spaces
Visit our Web site at www.csunitec.com
Annular Cutters and Accessories
Pneumatic and Hydraulic Portable Magnetic Drills
ATEX Classified
AIRBOR™ AB-4300
HB-4400
Pneumatic power
ø 2-1/16" cutter capacity
ø 5/8" twist drill
Hydraulic power
ø 2-1/16" cutter capacity
ø 1/2" twist drill
For marine, construction and
underwater applications
ATEX for hazardous environments
Accessories for hole cutting, twist drilling, tapping and more
Lubricants
Non-toxic ProLube™ Lubricants prolong tool life
by reducing friction and wear
Pilot Pins, Drill Chucks and Tapping Tools
Wide variety for cutting, twist drilling and tapping
Arbors and Extensions
Manual and automatic cooling models, as well as quick-lock, notools arbor; extensions extend cutter reach up to 18"
Drilling Starter Kits
MOBIL CLAMP
Convert magnetic drilling machine to bench drill
Drilling Stand and Vise
Convert hand drill to drill press
Vacuum Plates
For channeled plates and smooth surfaces
Pipe Saddle
Clamp System
Safe, secure drilling of
pipes and tubular material
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
21
Portable Magnetic Drill Comparison Chart
MABasic 200 MABasic 400 MABasic 450 MABasic 850 MAB 150
MAB 455
MAB 485
MAB 525
AutoMAB
MAB 455 SB MAB 485 SB MAB 525 SB 350
Annular Cutters Diameter (ø)
up to
ø 1-3/8"
up to
ø 1-5/8"
up to
ø 1-5/8"
up to ø 3"
up to ø 2"
Twist Drills Diameter (ø)
up to
ø 1/2"
up to
ø 5/8"
up to
ø 3/4"
up to
ø 1-1/4"
up to
ø 1-1/2"
up to ø 2"
up to
ø 2-1/2"
up to
1-1/2"
up to ø 7/8" up to ø 7/8" up to ø 1"
Tapping
Diameter (ø)
up to ø
15/16"
up to ø
15/16"
Countersinking Diameter (ø)
up to ø
1-9/16"
up to ø 2"
Reaming Diameter (ø)
up to ø 3/4" up to ø 7/8"
Stroke
6-1/3"
6-1/3"
6-1/3"
10"
1"
6-1/3"
6-1/3"
6-1/3"
6"
Weight
27 lbs.
27 lbs.
29 lbs.
53 lbs.
24 lbs.
29 lbs.
29 lbs.
35 lbs.
33 lbs.
Speed Range 1 (RPM)
450
430
250
110
400
250
50-250
70-280
450
760
450
175
450
100-450
180-580
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Speed Range 2 (RPM)
Speed Range 3 (RPM)
245
Speed Range 4 (RPM)
385
CoolMag
CoolMAG
SafeMag
System
Electronic Safety
Shutoff Sensor
Tool Holder
CoolMag
✓
✓
✓
Set Screw
Set Screw
Set Screw
Set Screw
MT2
MT3
Magnet
Morse Taper (MT)
Set Screw
Quick-change Quick-change Quick-change
Set Screw
keyless
keyless
keyless
MT2
MT2
MT3
Safety Friction Clutch
✓
Torque Control
Swivel/Adjustable Base
Magnet Size
22
6-5/8" x
3-1/3"
6-5/8" x
3-1/3"
•
6-5/8" x
3-1/3"
1-800-700-5919
8-5/8" x
4-1/3"
•
6-5/16" x
3-3/16"
✓
✓
✓
6-5/8" x
3-1/3"
6-5/8" x
3-1/3"
7-1/8" x
3-1/2"
Visit our Web site at www.csunitec.com
7-1/8" x
3-1/2"
Made in Germany
Powered by
MAB 825
MAB 825 KTS MAB 825 V
MAB 845
MAB 1300
AIRBOR™
MAB 1300 V
HB 4400
CSU 32RL
CSU 50AC
CSU 50RL
CSU 80AC
CSU 100/3RL
up to
ø 1-5/8"
up to ø 4"
up to ø
5-1/8"
up to ø
2-1/16"
up to ø
2-1/16"
up to ø
1-1/4"
up to ø 2"
up to ø
3-3/16"
up to ø 4"
Max. hole diameter
up to 5-1/8"
up to ø 1"
up to ø
1-1/4"
up to ø
1-3/4"
up to ø 5/8" up to ø 1/2" up to ø 1/2" up to ø 7/8"
up to ø
1-1/4"
up to ø
1-1/4"
Max. twist drilling up
to 1-3/4"
up to ø
1-1/8"
up to ø
1-1/8"
up to ø
1-5/8"
up to ø
1-1/8"
Max. tapping
up to 1-5/8"
up to ø 2"
up to ø 3"
up to ø
1-1/4"
up to ø 2"
10"
10"
3.35" (12"
w/out retainer)
up to
10-1/4"
3-3/4"
5-3/4"
5-1/4"
10"
10"
99 lbs.
55 lbs.
112 lbs.
43 lbs.
48-1/2 lbs.
24 lbs.
29 lbs.
57 lbs.
57 lbs.
40-110
40-110
30-80
400
0-630
450
100
40-140
65-175
65-175
50-120
175
120-480
140-360
140-360
130-350
245
220-600
220-600
210-550
385
✓
✓
✓
up to ø 3/4"
up to ø 15/16"
(CSU 50RL only)
250
450
✓
✓
Pneumatic
Hydraulic
✓
Allows thread
cutting
(CSU 50RL only)
✓
✓
✓
✓
✓
✓
Overheating protection
✓
✓
✓
✓
✓
✓
Magnet adhesion
indicator
✓
✓
✓
✓
✓
✓
Shuts down motor if
magnetic contact lost
Set Screw
Quick-change Quick-change Quick-change
keyless
keyless
keyless
Quick-change
Set Screw
keyless
MT3
Special
Special
Features
Features
MT3
MT4
✓
✓
✓
✓
✓
✓
8-11/16" x
8-11/16"
8-5/8" x
4-1/3"
Set Screw
Set Screw
✓
MT2
MT3
MT3
✓
✓
✓
Swivel/adjustable
base
14" x 4-3/4"
•
8-3/4" x
3-1/2"
7-1/4" x 3"
1-800-700-5919
6-5/16" x
3-1/4"
•
6-1/2" x
3-1/2"
9" x 4-3/8"
9" x 4"
Visit our Web site at www.csunitec.com
23
Annular Cutters
Annular Cutters for burr-free finished holes,
without predrilling or step drilling
Annular Cutters include a corresponding pilot pin †
• Precision-ground fl utes provide effi cient chip clearance, increasing drilling productivity and decreasing cutter breakage
• Center hole for pilot pin accurately aligns the cutter, allows for internal lubrication
and removes the slug
• Double-action tooth geometry cuts, splits and ejects chips more effi ciently
†
Pilot pins not included with
6" and 8" depth cutters
6-Series HSS Unibroach™ Annular Cutters
Fully ground high-speed steel
Cutting depth:
1"
Drilling ø:
7/16" - 5-1/8"
2"
7/16" - 5-1/8"
3"
3/4" - 5-1/8"
4"
3/4" - 5-1/8"
6"
3/4" - 5-1/8"
Fully ground high-speed steel with TiAlN hard coating – for higher working temps
Cutting depth:
1"
2"
3"
4"
Drilling ø:
7/16" - 5-1/8"
7/16" - 5-1/8"
3/4" - 5-1/8"
3/4" - 5-1/8"
6"
3/4" - 5-1/8"
8-Series ARMOR-PLATED Unibroach™ Annular Cutters
9-Series Unibroach™ TCT Hornet Annular Cutters
Sintered carbide with Tungsten Carbide tips
Cutting depth:
1"*
2-3/8"
Drilling ø:
1/2" - 2" 1/2" - 5-1/8"
3-3/8"
3/4" - 5-1/8"
4"
6"
8"
3/4" to 5-1/8" 13/16" to 5-1/8" 13/16" to 5-1/8"
* 1-3/8" depth for diameters larger than 1-1/2"
10-Series One-Touch TCT Annular Cutters
Tungsten Carbide tipped with one-touch shank
Cutting depth: 1-3/8"
2-3/8"
3-3/8"
Drilling ø:
1/2" - 2" 1/2" - 2-3/4" 9/16" - 1-1/16"
4"
9/16" - 1-1/16"
Also available:
Cobalt Cutters
Large-diameter Cutters
Unibroach® Stack Cutters
4-Series Carbide-Tipped Rail Cutters
Carbide-tipped rail bits for quick and efficient cutting
through rust and corrosion
Cutting depth:
1-3/8"
Drilling ø:
3/4" - 1-11/16"
24
•
1-800-700-5919
•
During drilling,
the pilot pin
retracts and
allows internal
coolant to
reach the
cutting teeth.
3: Ejecting
The pilot pin
accurately
centers cutter
over area to
be drilled.
2: Oiling
1: Centering
Pilot Pins: How they work…
Visit our Web site at www.csunitec.com
When hole
is complete,
the slug is
automatically
ejected from
the cutter.
Carbide-Tipped Hole Saws
Cut holes in steel plate
• Tungsten carbide-tipped cutting edges last longer
and can be run at higher feeds and speeds to create
holes of exceptional quality and accuracy
• One-piece construction; diameters from 9/16" to 4-1/2"
• Designed for use with hand-held drills –
recommended drills include our EHB 16 series
or other hand-held drills with slip clutch
Model EHB 16/2.4
SR/LC: 2-speed,
variable-speed
drill with safety
clutch
2-Series Carbide-Tipped
Hole Cutters
Extra Heavy Duty
1-Series Carbide-Tipped
Hole Cutters
1" effective length
Center twist pilot drill
Safety Collar Stop
3/8" shank on cutters up to 3-1/4" dia.
1/2" shank on cutters 3-5/16" dia. and larger
9/16" effective length
Spring-loaded Pilot Pin
Cutters feature milled, 3-flat shank
designed to fit 1/2" chucks.
Order No.
Diameter
Order No.
Diameter
Order No.
Diameter
Order No.
Diameter
1-1-118
1-1-120
1-1-122
1-1-124
1-1-126
1-1-128
1-1-130
1-1-132
1-1-134
1-1-136
1-1-138
1-1-140
1-1-142
1-1-144
1-1-146
1-1-148
1-1-150
1-1-152
1-1-154
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
1-1/8"
1-3/16"
1-1/4"
1-5/16"
1-3/8"
1-7/16"
1-1/2"
1-9/16"
1-5/8"
1-11/16"
1-1-156
1-1-158
1-1-160
1-1-162
1-1-164
1-1-166
1-1-168
1-1-170
1-1-172
1-1-174
1-1-176
1-1-178
1-1-180
1-1-182
1-1-184
1-1-186
1-1-188
1-1-190
1-1-192
1-3/4"
1-13/16"
1-7/8"
1-15/16"
2"
2-1/16"
2-1/8"
2-3/16"
2-1/4"
2-5/16"
2-3/8"
2-7/16"
2-1/2"
2-9/16"
2-5/8"
2-11/16"
2-3/4"
2-13/16"
2-7/8"
1-1-194
1-1-196
1-1-198
1-1-1100
1-1-1102
1-1-1104
1-1-1106
1-1-1108
1-1-1110
1-1-1112
1-1-1114
1-1-1116
1-1-1118
1-1-1120
1-1-1122
1-1-1124
1-1-1126
1-1-1128
1-1-1136
1-1-1144
2-15/16"
3"
3-1/16"
3-1/8"
3-3/16"
3-1/4"
3-5/16"
3-3/8"
3-7/16"
3-1/2"
3-9/16"
3-5/8"
3-11/16"
3-3/4"
3-13/16"
3-7/8"
3-15/16"
4"
4-1/4"
4-1/2"
2-1-118
2-1-120
2-1-122
2-1-124
2-1-126
2-1-128
2-1-130
2-1-132
2-1-134
2-1-136
2-1-138
2-1-140
2-1-142
2-1-144
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
1-1/8"
1-3/16"
1-1/4"
1-5/16"
1-3/8"
2-Series Accessories
Order No.
Description
2-1-pilot
2-1-screw
Pilot/Ejector Pin
Screw
1-Series Accessories
Order No.
Description
Center Pilot Drill
1-1-drill
1-1-spring Spring
1-1-screw Screw
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
25
Reamers, Drills & Drive Motors
Air • Electric • Hydraulic
Bridge Reamers, Corner
Drills and Drive Units
Electric Bridge Reamer
EHB 32/2.2 R/RL
Air, electric and hydraulic power for bridge reaming and heavyduty drilling applications in steel and other metals, as well as
tube rolling, tube expanding, tapping, valve turning and more.
AIR
Bridge
Reamer
• Electric bridge reamers and drive units have high torque,
two gears and variable-speed reversible motors
• Air and hydraulic bridge reamers
include self-closing roll throttle
and built-in oiler for motor
Model
EAU 34/4 CB
Model
EAU 36/4
Torque
Load
Weight
Drilling Reaming Tube Output
Speed
Motor Specifications
(in steel)
Model Number
Rolling (ft./lbs.) Arbor (lbs.)
(in steel)
Electric Motor for reaming, drilling and tapping – with torque control
14
MT3
1-1/4"
1-1/4"
92
2"
16.3 Amp / 110V
60-140 /
EHB 32/2.2 R/RL
(reversible)
200-470
Pneumatic Bridge
2 1602 0030
2 1701 0030
2 1801 0030
2 2104 0030 (reversible)
Reamers / Corner Drills – ATEX Classified for Ex Zones
5/8"
500
0.7 HP, 21 CFM @ 90 PSI
1/2"
7/8"
270
1.8 HP, 49 CFM @ 90 PSI
5/8"
1-1/4"
260
1"
2.6 HP, 63 CFM @ 90 PSI
2-1/8"
180
2"
3.0 HP, 63 CFM @ 90 PSI
Hydraulic Bridge Reamer / Corner Drill
3.8 HP, Oil Pressure
2 1806 0010
2000 PSI, Oil Flow 4 GPM
220
Electric Drive Units with reverse and variable speeds
16.3 Amp / 110V
30-230
ETE 32/2.3 R/RL
20
Amp
/
110
V
80-570
EAU 34/4*
22 Amp / 110 V
50-420
EAU 36/4 R R/L**
with 4-speed gearbox and
variable speed
ATEX Classified
–
–
–
2"
7
35
53
86
MT1
MT2
MT3
MT4
7
19
25
37
1-1/4"
1"
–
60
MT3
25
N/A
N/A
N/A
N/A
N/A
N/A
3"
174
203
187
MT3
MT3
MT3
15
19.5
20
* EAU 34/4 available with control box (on/off, reverse) – order Model No. EAU 34/4 CB
** EAU 36/4 R R/L available with control box – order Model No. EAU 36/4 R R/L CB
Woodboring Air Drills – Reversible
Heavy-duty power for underwater drilling and other wood boring applications
• Ideal for drilling wood in marine timbers,
underwater use and railroad repair work
• 1/2" woodboring chuck style
• Thrust bearing support for long life
and effi cient operation
• Lever throttle and durable spur gearing
• Includes breast plate and dead handle
• Accessories include 1/2" to 1-1/2" dia.
woodboring drill bits in lengths from 12" to 36"
Model
2 1903 0010
with lever throttle
Up to 1" dia.
Model
2 1924 0010
with self-closing
roll throttle
Up to 2" dia.
Free
Weight
Drilling
Spindle (lbs.)
Speed
Motor Specifications
(in wood)
Model Number
Woodboring Drills – include 1/2" NPT threaded exhaust port
14.5
1"
2 HP, 39 CFM @ 90 PSI
Stub
750 RPM
2 1903 0010
24.75
2"
3 HP, 50 CFM @ 90 PSI
MT2
700 RPM
2 1924 0010
24.75
3"
3 HP, 50 CFM @ 90 PSI
MT3
380 RPM
2 1932 0010
26
•
1-800-700-5919
•
Optional Geared Drill Chuck
Part no. DE-99C
Part no. IBC 22 (MT2)
Part no. IBC 21 (MT3)
Visit our Web site at www.csunitec.com
Portable Beveling Machines
EKF Multipurpose Beveling Machines
Bevel, deburr, chamfer and prepare weld seams faster
and cleaner than angle grinders
• Bevel 30˚, 45˚ or 2.5mm radius on steel, stainless, nonferrous metals, brass and plastics
• Deburr and chamfer; straighten edges, internal and external
radii; and countersink holes from 7/8" dia.
• Fine adjustment feature for slight chamfers when
deburring for the preparation of weld seams
• Ideal for: Boiler and process plant construction
(prepare weld seams on heat exchangers); Mechanical
engineering (deburr machine parts, chamfer edges to
protect against paint peeling and create visible edges); Sheet
metal (deburr cut edges); Moldmaking (straighten edges,
internal and external radii and countersink holes from 7/8" dia.)
One Machine, Three Milling Options
Three Models:
EKF 300.3 - 30˚
EKF 450.3 - 45˚
EKF 452.3 - 2.5R
Also available:
1.6mm / 0.063"
cutting inserts
(SHM 201).
EKF300.3
Contact us for
Milling
cutter 30°,
details.
Chamfer 0 - 1/4"
SKF Beveling Machine
for Plates and Pipes
EKF452.3
Milling cutter
2.5mm radius
(0.098")
Powerful, self-guiding beveling AutoCUT
500
machine for 15˚ to 60˚ edges on
plate up to 1.5" thick
• Bevel 15˚ to 60˚ angles and land width up to 3/4" on steel, stainless steel, aluminum and
nonferrous metal plates and pipe
• Work on welding angles and weld preparation on
pipes/tubes with a minimum OD of 6-1/4" (160mm) with
built-in pipe roller guide; ideal for beveling pipe 6-1/4"
OD and larger
• Robust design, single operator control and easy handling
• Anti-vibration system for operator comfort
Motor Power
EKF450.3
Milling cutter 45°,
Chamfer 0 - 1/4"
AutoCUT 500 Automatic
Edge Processing Machine
Fast, easy preparation of
weld seams and bevels
on plate or pipe
Model No.
2.5mm radius
45˚
30˚
• Bevel 15˚ to 60˚ angles
and land width up to
1-3/16" on steel,
stainless steel,
aluminum and nonferrous
metal plates and pipe
• Unit propels itself on the plate,
no need for a cart or stand
• Automatic feed and return
• Reversible carbide
cutting inserts
SKF
025
Beveling
Angle
EKF Multipurpose Beveling Machines
30˚
13.5 Amp/110 V
EKF 300.3
45˚
13.5 Amp/110 V
EKF 450.3
13.5 Amp/110 V 2.5mm (0.098")
EKF 452.3
SKF Beveling Machine for Plates and Pipes
10 Amp/110 V
15˚ - 60˚
SKF 025
Continuously Adjustable
Max.
Bevel
Width*
Cutting
Speed
Cutting
Inserts
Qty.
1/4"
3000 SFPM
3
12-1/2" L x 5-1/2" W
x 11-5/8" H
10.5
3/4"
1800 SFPM
12
16-1/2" L x 13" W
43
2750 SFPM
6
23-1/2" L x 24" W
x 20-1/2" H
110
Dimensions
Weight
(lbs.)
AutoCUT 500 Automatic Edge Processing Machine
AutoCUT 500
10 Amp/230 V
3-phase
15˚ - 60˚
1-3/16"
Continuously Adjustable
* Max. bevel width may require several passes, depending on material hardness
•
1-800-700-5919
•
220 V / 50 Hz also available
Visit our Web site at www.csunitec.com
27
Dry Cutting Circular Saws – Electric
Fast, portable, burr-free cutting of metal plates,
pipes, profiles and more… without coolant
Super Hand-Held Dry Cut Saw
Largest
Hand-held
Dry-cutting
Metal Saw
12-5/8" diameter, cut up to 4-3/4" depth
and 3/8" thick steel plate
• Largest portable dry metal cutting saw on the market
• Cut steel, sandwich panels, sheet metal, I-beams,
trapezoidal sheets, conduit, pipes, and more –
without coolant
• Side-mounted tilt tray for disposal of chips
• Motor protection with optical overload indicator
• Dust collection port
8320 SHDC Super Hand-Held
Dry Cut Saw (608270 U)
standard equipment includes
a saw blade (P/N 608276).
Integrated dust
collection port
Order No. 608270 U
Motor Power
16 Amp/110V*
Blade Diameter
12-5/8" (320mm)
Max. Depth of Cut
4-3/4" (120mm)
Speed (Free)
1,400 RPM
Arbor Size
1"
Blade Part No.
608276 (12-5/8" dia.)
Blade No. of Teeth
84T
Weight
21 lbs.
Super Hand-Held Accessory: Guide Rail with Clamping System –
2 x 23 5/8" Rails
(P/N 608275 SET - shown at left)
Ideal for straight cutting of
sandwich panels and sheets, guide rail
and clamping system provides secure
and jam-free guidance of saw blade
through material. Rails can be used
together for straight edge length up
to 55" (1,400mm).
* 230V also available – Order No. 608270
Optional 12-5/8" Saw Blade for Model 8320 SHDC
P/N 608276SI, 84T, for stainless steel
Blade specially coated, increasing cutting life by 2.5X
28
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Dry Cutting Circular Saws – Electric
Dry Cut Miter Saw – 10" dia.
Precise 45˚ cuts left and right
• Cut tubes, profiles, etc. from steel, stainless, non-ferrous metal, plastic, composite and more – no coolant or deburring necessary
• Fine cuts in soft and sensitive materials
• Adjustable saw head for miter cuts of -45˚ to +45˚
• Easy clamping with 3-step quick-release system
• Lightweight and portable at only 42 lbs.
Order No. 608700
13 Amp/110V
Motor Power
10" (255mm)
Blade Diameter
4" at 90˚
Max. Depth of Cut
1,600 RPM
Speed (Free)
1"
Arbor Size
600598 (10" dia.)
Blade Part No.
60T
Blade No. of Teeth
42 lbs.
Weight of Saw and Stand
9410 ND Max. Cutting Capacities
Round
Square
Rectangular
90˚ Cut
2.00"
2.00"
3.9" x 2.00"
9410 ND standard equipment includes
carrying case and saw blade (P/N 600598).
10" Saw Blades for 9410 ND
P/N 600598, 60T, for mild steel
P/N 600654, 66T, for thin steel
P/N 600654SI, 66T, for stainless steel
45˚ Cut
1.25"
1.25"
2.36" x 1.25"
Premium Super Dry Cutter – 14" dia.
6" max. depth of cut
• Cut stainless steel, ferrous and nonferrous metal, plastic and aluminum
tubes, profiles and more – no coolant or deburring necessary
• Exclusive blade stabilizing system
reduces vibration
• Powerful, high-torque motor for
continuous operation
• Patented quick-release vise for precise
bevel cuts
Order No. 608302
Model 9435 Max. Cutting Capacities
Round
Square
Rectangular
90˚ Cut
5.5"
4.92"
4.13" x 6.1"
45˚ Cut
4.72"
3.15"
2.95" x 3.93"
Motor Power
15 Amp/110V*
Blade Diameter
14" (355mm)
Max. Depth of Cut
6" at 90˚
Speed (Free)
1,600 RPM
Arbor Size
1"
Blade Part No.
724072 (14" dia.)
Blade No. of Teeth
72T
Weight
55 lbs.
* 220V also available – Order No. 608301-220V
9435 Premium Super Dry Cut Saw (608302) standard
equipment includes saw blade (P/N 724072).
Optional stand available – Order No. 600526T3
14" Saw Blades for Model 9435
P/N 724072, 72T,
for construction
P/N 600570, 90T,
for stainless and thin steel
P/N 600570SI, 90T,
for stainless steel
P/N 600580, 72T,
for stainless and medium steel
P/N 600590, 60T,
for stainless and thick steel
P/N 600591, 60T,
recommended for cast iron
P/N 600595, 66T,
recommended for mild steel
P/N 600594, 96T,
recommended for aluminum
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
29
Dry Cutting Circular Saws – Pneumatic
Air power ideal for petrochemical, marine,
demolition and fabrication industries
7-1/2" dia. Heavy-Duty Air Saw
Cut up to 2-1/2" depth at 90˚ and 1-1/2" at 45˚
• Heavy-duty air-powered circular saw,
ideal for wet and dirty conditions
• Pneumatic power eliminates burn out
from stalls
• Cuts up to 2-1/2" depth at 90˚ and 1-1/2" depth at 45˚
• 7-1/2" max. blade capacity
• D-handle design with inside trigger
and safety lock button to prevent
accidental starting
1.7 HP
Air Motor
Order No. 5 1116 0020
Motor Power
Blade Diameter*
Max. Depth of Cut
Speed (Free)
Air Consumption
Air Connection
Vibration
Length
Weight
1.7 HP (1.3 kW)
7-1/2" (190mm)
2-1/2" at 90˚ / 1-1/2" at 45˚
3,200 RPM
53 CFM at 90 PSI
1/2" NPT
<2.5 m/s2
13-1/2"
19 lbs.
* The Model 5 1116 0020 saw also accepts 7-1/4" dia. blades.
Standard equipment includes rip fence and
blade wrench. Blade not included.
9" dia. Air Saw for 90˚ and 45˚ Cuts
Dry cut up to 3-1/4" depth and 3/8" thick steel plate
ATEX Classified
• Cut steel, non-ferrous metal,
plastic, grating, composite and
corrugated materials
• Cuts at 90˚ and 45˚ angles
• Ideal for petrochemical, marine,
demolition and fabrication
applications
• Cuts steel plate up to 3/8" thick
Dry Cutting TCT Saw Blades
9" diameter
(1" arbor)
9" Laser Beam Saw (LBS)
ultra-thin blade for allpurpose use features:
2 HP Air Motor
Optional Adjustable
Rail Guide
Ideal for clean and straight
cutting up to 47" of metal
grids, sandwich panels,
multiple profiles and more.
Cutting depth of 3-1/8" with
rail. (P/N 608284)
Part No.
Teeth Thickness
722-23060* 60
.055"
30
Ultra-thin blade
(P/N 722-23060)
.055" (1.4mm)
thickness
2 HP (1.5 kW)
9"
3-1/4" at 90˚ / 2-1/8" at 45˚
1,700 RPM
71 CFM at 90 PSI
1/2" NPT
<2.5 m/s2
19 lbs.
Standard equipment includes an impact-resistant
carrying case and Ultra-thin LBS blade (P/N 722-23060).
• Thinner than conventional saw
blades: LBS = .055" vs.
Std. = .073" thickness
• Shock-resistant, less vibration
• Produces 35% fewer chips
Standard
blade .073"
(1.85mm)
thickness
Order No. 5 1115 0020
Motor Power
Blade Diameter
Max. Depth of Cut
Speed (Free)
Air Consumption
Air Connection
Vibration
Weight
* Standard with Model 5 1115 0020
Pneumatic Metal Saw.
Tungsten Carbide-Tipped Dry Cutting Blades,
9" dia., .073" thick for Model 5 1115 0020
P/N 721-23048, 48T, for standard use
P/N 721-23060, 60T, for aluminum
P/N 721-23068, 68T, for thin-wall metal
P/N 721-23084, 84T, for sheet metal
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Dry Cutting Circular Saws – Pneumatic
Cut I-beams, 3/8" thick steel plate, insulation boards,
sandwich panels, aluminum, plastics and more
• Heavy-duty air-powered circular saw
• Pneumatic power eliminates burn out from stalls
and dusty jobsite conditions
• Powerful 2.4 HP motor for demanding applications
• Cuts 3/8" thick steel plate and up to 4-3/4" in
other materials
• 12-5/8" max. blade capacity
• Suction nozzle and internal chip collector
for clean operation
• D-handle design with inside trigger and
safety lock button to prevent accidental starting
• Ideal for steel construction, demolition and more
Model 5 1117 0020
4 3/4" max. cutting depth;
Cuts 3/8" thick steel plate
Order No. 5 1117 0020
Motor Power
Blade Diameter
Max. Depth of Cut
Speed (Free)
Air Consumption
Air Connection
Vibration
Weight
Safety Lock
2.4 HP (1.8 kW)
12-5/8"
4-3/4"
1,200 RPM
71 CFM at 90 PSI
1/2" NPT
<2.5 m/s2
24 lbs.
Air Connection
Guard Lock
Adjustable
Cutting Depth
Second Handle
2.4 HP Air Motor
12-5/8" Saw Blades for
Model 5 1117 0020
P/N 608276, 84T
for standard use
Dry Cutting Circular Saw Accessory:
Guide Rail with Clamping System
(P/N 608275 SET)
Ideal for straight cutting of sandwich panels
and sheets, guide rail and clamping system
provides secure and jam-free guidance of saw blade
through material. Rail provides straight edge length
up to 55" (1,400mm).
•
1-800-700-5919
12-5/8" Dry Cutting
Saw Blade included
(P/N 608276).
•
P/N 608276SI, 84T
for stainless steel
Visit our Web site at www.csunitec.com
31
Portable Reciprocating Saws
Air • Hydraulic
Hand-held or clamp-on cutting in tough environments
Ideal for a wide range of industries, including subsea, gas utilities, offshore oil,
petrochemical, power generation, industrial plant maintenance and construction
• Fast cutting of pipe, structural steel, bolts, nails, pallets and other material
• The best power-to-weight ratios in the industry; compact size for cutting in confined spaces
• Accessories include wide variety of heavy-duty blades and clamps for 90˚ cuts
The CAT Model 5 1217 0020
AIR
The SHARK Model 5 1219 0010
The WOLF Model 5 6005 0010
AIR
ATEX Classified
HYDRAULIC
1.6 HP, Cuts steel pipe and channel
1/2" to 6" dia., plastic pipe to 8" dia.
1.3 HP, Cuts steel pipe and channel
1/2" to 4" dia., plastic pipe to 8" dia.
90˚
2 HP, cuts pipe up to 6" dia., wood up
to 8" dia., metal plate up to 3/4" dia.
Stroke
Length
Strokes
per Minute
Connection
Length
Weight
(lbs.)
The CAT – Pneumatic
1.3 HP, 46CFM @ 90 PSI
5 1217 0020
1-1/8"
0-1800
1/2" NPT (ID)
15-7/8"
9
The WOLF – Pneumatic
5 6005 0010
1.6 HP, 51CFM @ 90 PSI
1-1/8"
0-2200
1/2" NPT (ID)
17-3/4"
10.75
1700
M 18 x 1.5
Female
Model
Number
Motor Specifications
The SHARK – Hydraulic
5 1219 0010
2 HP, Oil Pressure 2000 PSI,
Oil Flow 6 GPM (up to 13 GPM)
13.2
Low Vibration/Low Air Volume – Compact, Quiet & Reliable
Cut Pipe, Structural Steel, Sheet Metal, Fiberglass, Plastic and More
Workhorses for use in the fabrication, shipbuilding, ship repair, oil and petrochemical,
boat building and aircraft maintenance fields, as well as by fire and rescue professionals
• Piston air motors use low air volume while maintaining a cutting speed of
1200 to 2000 strokes per minute
• For use in hazardous areas and around gas and other flammable materials
• Heavy-duty cast steel and aluminum saw bodies; built-in motor lubrication
• Safety STOP/Isolator button disconnects air supply
• Variety of Cengar Air Saw blades available
PL Series
ATEX Classified
CL Series
Optional inside trigger*
for hand-held use only.
Add FT to Model No.
Model No. Trigger
PL905
CL50
CL75
32
Outside
Outside
Outside
Strokes
per
Motor Stroke
Power Length minute
1 HP
1 HP
1 HP
7/8"
1-3/4"
1-3/4"
•
Dimensions
(LxHxW)
Noise Vibration
Weight CFM @
Level Levels
(lbs.)
90 PSI Connection db(A)
m/s2
2000
113/4" x 51/4" x 15/8"
5.25
1200
153/4"
5.5
1200
153/4"
1-800-700-5919
x
x
5.5
1/2" NPT ID
69
1.73
5.75
1/2" NPT ID
83
3.69
5.75
•
Visit our Web site at www.csunitec.com
x
15/8"
1/2" NPT ID
83
x
51/4"
15/8"
4
51/4"
3.69
Reciprocating Saw Blades & Accessories
Super quick and precise for pipe, steel, plastic, etc.
Extra-thick Blades for 90˚ Cutting with a Pipe Clamp, Double Shank*
Heavy-duty Blades – These blades are much thicker than standard blades and have
a stronger double-tang mount for heavy-duty cutting, either free-hand or with a clamp.
No. 1001
No. 1002
No. 007D/200*
Cuts pipe up to 2"
Cuts pipe up to 4"
Cuts pipe up to 4"
6" L x 1" W x .060" T
8" L x 1" W x .060" T
8" L x 1" W x .050" T
8 TPI
8 TPI
M-Tooth
Ask for special blades to cut steel.
* 007D/200 has universal 1/2" tang
Heavy-duty HSS-Bi-metal Blades for Freehand Sawing, Double Shank
No. 1005 10/14 TPI
No. 1003 10/14 TPI
No. 1004 10/14 TPI
Made of tough, resilient steel with 10/14 variable tooth
pitch. Large blade width and double-shank mount
deliver excellent cutting performance and durability.
6" L x 1" W x .035" T
8" L x 1" W x .035" T
12" L x 1" W x .035" T
Mega Sharp M-Tooth Saw Blades for Freehand Cutting with Standard 1/2" Shank
CUTS 2x FASTER THAN ORDINARY BLADES! M42 Bi-metal for cutting steel and stainless steel
The teeth of the Patented M-Tooth Sawblade cut on the forward and back strokes, saving time.
Metal up to 1/8" Thick
No. 006/150
No. 006/200
Cuts in
Both Directions!
Metal 1/8" and Thicker
No. 007/150 M-Tooth 6" L x 3/4" W x .035" T
No. 007/200 M-Tooth 8" L x 3/4" W x .035" T
No. 007/280 M-Tooth 12" L x 3/4" W x .035" T
M-Tooth 6" L x 3/4" W x .035" T
M-Tooth 7" L x 3/4" W x .035" T
Cengar Air Saw Blades
1/2"
Wide Bi-metal Blades
HB300/18
HB300/24
HB300/32
MC220/18
MC220/24
MYN150/18
MYT150/18
Hand
Hand
Hand
Machine
Machine
Notched Yellow
Tapered Yellow
(CL50 / PL905)
18 TPI
24 TPI
32 TPI
18 TPI
24 TPI
18 TPI
18 TPI
12" L
12" L
12" L
83/4" L
83/4" L
6" L
6" L
3/4"
Wide Bi-metal Blades
MB150/18
MB200/10-14
MB200/18
MB200/24
MB250/18
MB250/24
MB300/10-14
MB300/18
Machine
Machine
Machine
Machine
Machine
Machine
Machine
Machine
Model CSAP-2
Air Tool Lubricant
ProLube-ATL - P/N CS 7043-001 (gallon)
• Eliminates air motor
downtime caused by water
and dirt
Air Tool Lubricant with Anti-Freeze
ProLube-ATL/AF - P/N CS 7049-001 (gallon)
• Connections for two tools,
max. air flow 185 CFM
Air Tool Line Conditioner/Cleaner
For use in underwater air tools – displaces
moisture and inhibits rust and corrosion of
air motors - P/N MS 9105 (quart)
•
1-800-700-5919
18 TPI
10/14 TPI
18 TPI
24 TPI
18 TPI
24 TPI
10/14 TPI
18 TPI
6" L
8" L
8" L
8" L
10" L
10" L
12" L
12" L
Hydraulic Power Unit
AirPac Dryer/Cleaner
• Removes moisture and dirt
from air lines; a float valve automatically ejects water
and dirt
• Includes automatic oiler;
protects tools from freezing
in cold environments
(CL75)
•
Model P95
• Ideal for use with our
hydraulic power tools.
• Delivers 5 GPM or
8 GPM at 2000 PSI
• Easy to move with lift
and latch handle
• Weighs 330 lbs.
• 18 HP gas engine
The Hydraulic Power Unit is available with
gas, electric or diesel engines. Contact us
for more information.
Visit our Web site at www.csunitec.com
33
Portable Band Saws
Air • Electric • Hydraulic
Fast, on-site cutting of pipe up to 8-1/2" diameter
Cold cutting saws for a wide range of industries, including refineries, chemical
plants, utilities, construction, offshore oil, mining, marine and demolition
Pneumatic AirBand ™ Saws
• Fast, deep, cold cutting of pipe,
conduit, bolts, cable, angle iron,
structural steel, chain and more
• Cut steel, stainless steel, Inconel,
chrome, Hastelloy, aluminum,
copper, iron, fiberglass, plastics, wood and more
Standard:
Cut 4 3/4" round or 4 1/2" x 4 3/4"
Cutting
Capacity
Model No.
5 6031
0010 Steel housing
Deep Throat™ AirBand
– Stainless
5 6031 0010
90 PSI @ 43 CFM
7" OD / 7" x 7"
Cut 7" round or 7" x 7"
Wide Mouth™:
Cut 8
round or 9" x 8"
Wide Mouth™ AirBand – Stainless Steel housing
5 6062 0010
90 PSI @ 43 CFM
81/2" OD / 9" x 8"
Electric Band Saws
6 Amp, 110VAC
Cutting
Capacity
Model No.
Cut 4
3/4"
round or 4
Deep Throat ™:
x4
3/4"
Cut 7" round or 7" x 7"
Cut 8 1/2" round or 9" x 8"
Hydraulic Band Saws
3/8"
14
1/2"
NPT
1/2"
8
1/2"
NPT
1/2"
35
1.6 HP; Oil Flow: 4 GPM @ 2000 PSI
1/2" FF (HTMA) Couplings
Cutting
Wgt.
Model No.
Capacity
(lbs.)
Standard – Stainless Steel housing
Wide Mouth™ – Stainless Steel housing
5 6079 0020 81/2" OD / 9" x 8"
34
Wide Mouth™ – Stainless Steel housing
5 6054 0010 81/2" OD / 9" x 8"
35.6
7" OD / 7" x 7"
28
M42 Cobalt Steel SuperBand™ Saw Blades
No. 9 2506 0010
No. 9 2506 0020
18 TPI
14 TPI
Blades for Deep Throat™
No. 9 2506 0220
saws (Model Nos. 5 6031 0010, No. 9 2506 0230
14 TPI
Cuts material 3/16" - 1/2" thick
8/12 TPI*
Cuts material 1/2" and thicker
(Model Nos. 5 6003 0010,
5 6046 0010 and 5 6043 0010)
No. 9 2506 0030
No. 9 2506 0040
Blade dimensions:
447/8" L x 1/2" W x .025" T
Standard:
5 6047 0010 and 5 6041 0010)
Cut 4 3/4" round or 4 1/2" x 4 3/4"
No. 9 2506 0240
Blade dimensions:
66" L x 5/8" W x .025" T
Deep Throat ™:
No. 9 2506 0200
Blades for Wide Mouth™
saws (Model Nos. 5 6062 0010, No. 9 2506 0350
Cut 7" round or 7" x 7"
Cut 8
NPT
5 6043 0010 43/4" OD / 41/2" x 43/4" 23
5 6031 0010
Deep Throat™ – Stainless
Steel housing
5 6041 0010
28
7" OD / 7" x 7"
Blades for standard saws
5 6099 0020 and 5 6054 0010)
Mouth™:
1/2"
1/4"
5 6046 0010 43/4" OD / 41/2" x 43/4" 14
Deep Throat™ – Stainless
Steel housing
5 6031 0010
5 6040 0010
Wide Mouth™:
Wide
Wgt.
(lbs.)
Standard – Aluminum housing
1/2"
No. 9 2506 0340
Blade dimensions:
71" L x 5/8" W x .025" T
round or 9" x 8"
No. 9 2506 0330
Cuts material 1/8" - 1/4" thick
Cuts material 3/16" - 1/2" thick
10/14 TPI* Cuts material 3/16" - 1/2" thick
8/12 TPI* Cuts material 1/2" and thicker
10/14 TPI* Cuts material 3/16" - 1/2" thick
8 TPI
Cuts material
3/4"
10/14 TPI* Cuts material 3/16" - 1/2" thick
8/12 TPI
6/10 TPI
Vise Clamps for Accurate Cuts
Model No. 5 6030 9000
Clamp-on vise for 4-3/4" Band Saws
Cuts material 1/2" and thicker
Cuts material 3/4" and thicker
• Securely clamp to round, square and angular materials for straight cutting
Model No. 5 6031 9400
Clamp-on vise for 7" Deep Throat™ Band Saws
Max. material size – rounds: 43/4";
squares: 41/2"; angles: 41/2"
Model 5 6031 9400
with Band Saw
Max. material size – rounds: 7"; squares: 5";
angles: 5"
•
1-800-700-5919
•
447/8"
66"
and thicker
* Variable tooth pitch (10/14 TPI and 8/12 TPI) saw blades cut faster and last longer than standard pitch blades.
Varying tooth size and gullet depth reduce harmonic vibration for quieter, more efficient cutting.
34
Air
Wgt.
Hose (lbs.)
Hydraulic Band Saws
Electric Band Saws
Standard:
Air
Connection
(ID)
Motor Power
and Specs.
Standard AirBand™ – Aluminum housing
5 6003 0010 43/4" OD / 41/2" x 43/4" 90 PSI @ 20 CFM
Deep Throat ™:
1/2"
9"
Cutting Capacity
Pneumatic Band Saws
Visit our Web site at www.csunitec.com
71"
Power Hacksaws
Air • Electric • Hydraulic
Cold cutting of large pipe up to 30" diameter
and structural steel – on site
Ideal for a wide range of industries, including refineries, chemical plants,
utilities, construction, offshore oil, mining, marine and demolition
• Cold cutting of large pipe, structural steel, tanks, profiles and more
• Compact size for cutting in confined spaces
• Accessories include wide variety of heavy-duty blades and clamps for 90˚ cuts
Model 5 1220 0050
Model 5 1215 0070
Model 5 1212 0050
AIR
ELECTRIC
HYDRAULIC
ATEX Classified
Strokes
per Min.
Blade
Stroke
Pneumatic – 3/4" ID NPT Air Connection
5 1212 0010
Air Consumption: 51 CFM
1.5 HP
Roll
5 1212 0050
Air Pressure: 90 PSI
1.5 HP
Lever
100-350
100-350
23/8"
23/8"
1/2"
1/2"
15.4
15.4
Electric – 11 Amps / 110 Volt (Also available as 220 Volt/50 Hz)
5 1215 0070
1.5 HP
Trigger
110V/60 Hz
200-400
23/8"
Cable
13
Hydraulic – 1/2" FF (HTMA) Couplings
5 1220 0050
3.8 HP
Lever
Oil Flow: 4 GPM at 2000 PSI
100-500
23/8"
1/2"
Model
Number
Power
Motor Specifications
Throttle
Hose
ID
Weight
(lbs.)
13.5
Hacksaw Accessories
Hacksaw Blades – 8" to 37" length
Order No.
Z22-9 HSS
Z22-10 HSS
Z22-11 HSS
Z22-6 HSS
Z22-6 HSS-SL*
Z22-31 HSS
Z22-7 HSS
Z22-29 HSS
Z22-33 HSS
Z22-72 HSS
Z22-30 HSS
Z22-30 HSS-SL*
Z22-73 HSS
Z22-74 HSS
Z22-75 HSS
Z22-75 HSS-SL*
Z22-76 HSS
Z22-37 HSS
Dimensions
Length
8"
8"
8"
12"
12"
12"
16"
16"
16"
20"
21"
21"
24"
24"
30"
30"
30"
37"
Teeth/ Thickness
Inch
1/16"
8
16
24
16
16
12
16
8
6
14
12
12
14
8
12
12
6
12
1/16"
1/16"
1/16"
1/16"
1/16"
1/16"
1/16"
1/16"
5/64"
1/16"
1/16"
5/64"
5/64"
5/64"
5/64"
5/64"
5/64"
Material
Steel/Alum.
Steel
Sheet Metal
Steel
Stainless Steel
Steel
Steel
Steel/Alum.
Cast Iron
Steel
Steel
Stainless Steel
Steel
Steel/Alum.
Steel
Stainless Steel
Cast Iron
Steel
Hacksaw Clamps and Guide
Max.
Dia.
of Cut
31/8"
31/8"
31/8"
65/8"
65/8"
65/8"
105/8"
105/8"
105/8"
145/8"
155/8"
155/8"
181/2"
181/2"
247/8"
247/8"
247/8"
317/8"
* Use HSS-SL Blades for best cutting performance on stainless steel and
hard metal. Blades for plastic, wood and masonry also available.
•
1-800-700-5919
•
Model No.
Cutting Dia.
Clamp Type
5 1207 9910
5 1202 9960
5 1207 8910
5 1207 8970
5 1208 9980
2" to 6"
4" to 12 3/4"*
Up to 21"
215/8" x 113/8"
Up to 12 3/4"*
5 1208 9990
Up to 12 3/4"*
Pipe Clamp
Pipe Clamp
Blade Guide
Profile Clamp
Automatic - Self-feeding
Clamp (for pneumatic saws)
Automatic - Self-feeding (for
electric and hydraulic saws)
Model 5 1208 9980 Self-feeding Pipe Clamp
for up to 12 3/4" dia. pneumatic saws*
Model
5 1202 9960
Pipe Clamp for
4" to 12 3/4" dia.*
Model 5 1208 9990 Self-feeding Pipe Clamp for
up to 12 3/4" dia. electric and hydraulic saws*
* Cut up to 30" OD with two extension chains (order 2x P/N 5 1201 9030)
Visit our Web site at www.csunitec.com
35
Pipe Cutting Machine
Cut pipe up to 63" dia. with wall thickness to 2"
Ideal for use in municipal, water, utilities, refinery, marine, petrochemical, power generation,
industrial plant maintenance, pipe line construction and demolition applications.
• Heavy-duty, versatile air and hydraulic pipe
cutting machines
ATEX Certified
• Cut pipe from 12" to 63" dia. with
wall thicknesses from 1/4" to 2"
• Use on ductile iron, steel, non-ferrous
metal, PVC, plastic, cement pipe and more
For use in hazardous
environments and
ATEX and Ex Zones
• 2-speed motors operate at 350 and 1800 RPM
• Machine is manually guided with hand lever feed to make a 360˚ cut in pipe
• Guide chain is adjustable by adding and removing chain links
• ATEX certifi ed under class II 2 GcT6 for use in industrial zones where fl ammable gas, vapor, mist and dust may be present and where surface temperatures do not exceed 185˚F/85˚C
• 7" blade with adjustable cutting depth
Pneumatic Model
No. 5 8010 0050
Features include:
• Adjustable cutting depth
• Blade guard
• Cooling water connection
• Carbide-tipped or diamondcoated blades (sold separately)
Hydraulic Model
No. 5 8006 7000
When ordering, specify pipe diameter and application for assistance with determining
required blade, feed handle, guide carriage & chain and tensioning chain & tensioner.
Model
Number
Blade
Arbor
Power
Motor Specifications
Speed
(RPM)
Blade
Dia.
Hose
Connection
Weight
(lbs.)
1800
7"
3/4" NPT
28
350/1800
7"
Pneumatic Motor
5 8010 0050
4 HP
7/8"
77 CFM @ 90 PSI
Hydraulic Motor – 1/2" FF (HTMA) Couplings
5 8006 7000
36
4 HP
7/8"
•
6-13 Gallons @ 2000 PSI
1-800-700-5919
•
1/2" FF (HTMA)
Visit our Web site at www.csunitec.com
28
Chain Saws
Pneumatic • Hydraulic
Pneumatic Chain Saws –
Powerful, efficient cutting of wood and plastic
Used successfully for many years in petrochemical industries, marine
applications, utilities, underground mines and polyethylene plants
Saws available with 10", 15", 17", 21" and 25" bar lengths
• Pneumatic power is safer than gas or electric in hazardous atmospheres
and wet environments, including underwater applications
• Low maintenance and easy startup – saw chain and motor are
automatically oiled by two separate lubricating systems
• Powerful 4 HP motors at 90 PSI air pressure, 92 CFM
• Standard with .404 pitch Super Chisel saw chain
• Optional carbide-tipped and ripping saw chain available
Series 5 1007
Series 5 1008
Series 5 1026, 5 1027 & 5 1028
Includes exhaust
valve and chain
guard to protect
operator.
Includes chain brake to stop
chain during kickback or
for repositioning
saw during cutting.
Cutting
Capacity
ATEX Classified
Hose ID
Weight
(lbs.)
5 1005 Series – Utility Air Chain Saw - Compact, Lightweight and Powerful
21"
10"
1/4" NPT (ID)
1.2 HP, 30 CFM @ 90 PSI
5 1005 0010
3/8"
5.4
5 1007 Series – General Use Air Chain Saw with Chain Guard
33"
17"
4 HP, 92 CFM @ 90 PSI
5 1007 0010
41"
25"
4 HP, 92 CFM @ 90 PSI
5 1007 0040
5/8"
5/8"
Model
Number
Motor Specifications
Length
with Bar
5 1008 Series – Underwater Air Chain Saw with Chain Guard
37"
21"
4 HP, 92 CFM @ 90 PSI
5 1008 0030
41"
25"
4 HP, 92 CFM @ 90 PSI
5 1008 0040
5 1026 Series – Cutting Wood, with Brake
4 HP, 92 CFM @ 90 PSI
5 1026 0010
Air
Connection
(15", 17", 21" and 25" bar lengths available)
3/4" NPT (ID)
3/4" NPT (ID)
25
31
(15", 17", 21" and 25" bar lengths available)
3/4" NPT (ID)
3/4" NPT (ID)
5/8"
5/8"
29
31
5/8"
25
(17", 21" and 25" bar lengths available)
33"
17"
3/4" NPT (ID)
5 1027 Series – Cutting Plastic, with Brake and Water Feed System (17", 21" and 25" bar lengths available)
28
5/8"
37"
21"
3/4" NPT (ID)
4 HP, 92 CFM @ 90 PSI
5 1027 0020
5 1028 Series – Underwater Air Chain Saw with Brake
25"
4 HP, 92 CFM @ 90 PSI
5 1028 0040
(17", 21" and 25" bar lengths available)
41"
3/4" NPT (ID)
5/8"
31
Hydraulic Pistol Grip Chain Saws
Ideal for use in utilities, subsea, mines,
construction and agriculture
Model ACH000-12 Pistol Grip Saw
Motor Power
• Up to 6.5 HP, high-torque gear motor
• Open/closed hydraulic system
• 12", 14" and 16" bar lengths available
• Pistol grip with safety trigger lock and
insulated handle
• Optional hose swivel to eliminate
tangled hoses (at left - P/N 640080)
•
1-800-700-5919
•
Handle
Overall Length
Bar Length
Weight
Hose Connection Up to 6.5 HP
Oil Flow: 3-8 GPM @ 2000 PSI
Pistol Grip
23" (with bar)
12" (14" and 16" optional)
5.8 lbs.
3/8" JIC 37˚
For 14" bar, order no. ACH000-14
For 16" bar, order no. ACH000-16
Visit our Web site at www.csunitec.com
37
Underwater Tools
Hydraulic • Pneumatic
Hydraulic- and pneumatic-powered
tools for use in subsea applications
Grinders - Hydraulic
1 1580 0060 Underwater Hydraulic Horizontal Grinder, 1.3HP, 7000 RPM, Twist throttle,
straight grinding wheels
1 1585 0010 Underwater Hydraulic Angle Grinder, 1.3HP, 5500 RPM, Lever throttle,
grinding wheels up to 7"
1 5080 0020 Underwater Hydraulic Peanut Die Grinder, 1.0 HP,
11,500 RPM, Lever throttle, 1/4" collet
1 2060 0010 Underwater Hydraulic Vertical Grinder, 4.75 HP,
3600 RPM, grinding wheels up to 9"
Rotary Hammer Drills - Hydraulic and Pneumatic
2 2404 0030 Underwater Air Rotary Hammer Drill, SDS Plus, 1" cap. in concrete,
0-3000 BPM, .5 HP, 90 PSI / 21 CFM
2 2417 0010 Underwater Air Rotary Hammer Drill, SDS Max, 2" cap. in concrete,
0-2500 BPM, 1.2 HP, 90 PSI / 21 CFM
2 2406 0010* Underwater Hydraulic Rotary Hammer Drill, SDS Plus, 1" cap. in concrete,
0-3400 BPM, .8 HP
2 2418 0010* Underwater Hydraulic Rotary Hammer Drill, SDS Max, 2" cap. in concrete,
2500 BPM, 1.75 HP
* Pressure Reducing Valves available for hydraulic rotary hammer drills. Contact CS Unitec for more information.
Core Drills - Hydraulic and Pneumatic
2 1317 0030 Underwater Hydraulic Core Drill, 3" max. dia., 3.6 HP, 380/900/1800 RPM
2 1335 0010 Underwater Pneumatic Core Drill, 3" max. dia., 3.8 HP, 300/700/1350 RPM
Impact Wrenches - Hydraulic and Pneumatic
ATEX
6 1316 0070 3/4" Air Impact Wrench, 1-1/8" (M 30) max. bolt size,
995 ft-lbs. torque
6 1316 0060 1" Air Impact Wrench, 1-1/8" (M 30) max. bolt size,
995 ft-lbs. torque
6 1515 0010 3/4" Hydraulic Impact Wrench,
1" (M 27) max. bolt size, 1220 ft-lbs. torque
6 1520 0010 1" Hydraulic Impact Wrench,
1-3/8" (M 36) max. bolt size, 1840 ft-lbs. torque
Caution: User must follow all appropriate safety
regulations when choosing a tool for their particular
working environment.
Other Underwater Tools Available:
Woodboring Drills - Pneumatic See page 26
Reciprocating Saws - Hydraulic and Air See page 32
Hacksaws - Hydraulic See page 35
Chain Saws - Air and Hydraulic See page 37
Portable Magnetic Drills - Hydraulic See page 21
38
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Axial Fans and Air Movers
Pneumatic • Electric
Explosion Proof
For use in Ex Zones and
Hazardous Environments.
Electric fan motors are
intrinsically safe, Ex.
Highly efficient, explosion-proof units
for ventilating, exhausting and cooling
Ideal for ship holds, underground mining, shipyards, refineries,
petrochemical plants, oil platforms, power plants, tunneling,
construction and more.
Explosion-Proof Axial Fans
Pneumatic and Electric
12" to 24" diameter
8 1020 Series
Electric Axial Fans with
protective grille on inlet
side, 2118 cfm output
8 1620 0010
7" dia. Pneumatic Air Mover,
2366 cfm output @ 90 psi
Caution: User must follow all
appropriate safety regulations
when choosing a tool for their
particular working environment.
8 1524 0300
24" dia. Pneumatic Axial Fan,
12,353 cfm output @ 90 psi
W 70 6" dia. Pneumatic Air Mover
3000 cfm output @ 90 psi
Explosion-Proof Pneumatic Axial Fans and Air Movers
Order No.
Description
Diameter Power
Volume Output
Air Pressure
Weight
dBA
8 1521 0300
8 1522 0300
8 1523 0300
8 1524 0300
8 1603 0300
Axial Fan
Axial Fan
Axial Fan
Axial Fan
Axial Fan
12"
16"
20"
24"
12"
Pneumatic
Pneumatic
Pneumatic
Pneumatic
Pneumatic
3240 cfm
5720 cfm
9170 cfm
12,353 cfm
2119 cfm
90 psi
90 psi
90 psi
90 psi
90 psi
48.5 lbs
70.4 lbs
101.2 lbs
127.6 lbs
28.6 lbs
101
92
90
86
85
W 40
W 70
8 1620 0010
Air Mover
Air Mover
Air Mover
4"
6"
7"
Pneumatic
Pneumatic
Pneumatic
1140 cfm
3000 cfm
2366 cfm
90 psi
90 psi
90 psi
11 lbs
22 lbs
8 lbs
91
91
104
Order No.
Description
Diameter
Power
Volume Output
Weight
dBA
ATEX Class
12"
12"
12"
12"
12"
230/400 V 50Hz 3-phase
110 V 50 Hz single phase
110 V 50 Hz single phase
110 V 50/60 Hz single phase
230 V 50 Hz single phase
2118 cfm
2118 cfm
2118 cfm
2118 cfm
2118 cfm
44 lbs
45 lbs
45 lbs
45 lbs
45 lbs
86
85
85
85
85
Ex II 2 GcT3
Ex II 2 GcT3
Ex II 2 GcT3
Ex II 2 GcT3
Ex II 2 GcT3
8 1020 0140
Axial Fan
8 1020 0840
Axial Fan
8 1020 0850* Axial Fan
8 1020 0860* Axial Fan
8 1020 0870
Axial Fan
* with switch and cable
Explosion-Proof Electric Axial Fans
Optional Axial Fan Accessories include:
Mounting Flanges for fitting fans to flanged pipes for suction or discharge (shown at right)
Protective Grilles for use on non-ducted fans
Antistatic Items including Connectors, Quick-Seal Couplings and Plastic Ducting
Contact CS Unitec for more information.
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
39
Linear Grinder and Angle Grinder
PTX Eco Smart Linear Grinder
The professional surface finisher for
hard, continuous use
• Multifunctional grinding and polishing system for fl at surfaces and open or closed pipe constructions
• Grind from coarse to shadow-free matte fi nish, up to a mirror polish
• Remove welds, deep scratches, oxidation and rust
• Ideal for stainless steel, steel and nonferrous metals including
aluminum, brass, bronze and copper, as well as wood and rigid plastic
• Complete line of grinding wheels, belt sleeves, special brushes,
polishing and maintenance abrasives available
Electric or
Pneumatic
PTX Eco Smart Specifications
Order Number PTX ECO SMART
Grind In Corners!
Abrasive mounting system saves time, reduces cost and eliminates
vibration! No-tools changeover of grinding and polishing wheels –
wheels and accessories slide onto the finned, rubber shaft and secure
themselves when machine turns. A wide selection of hollow-core slip-on
abrasives is available for the PTX Eco Smart.
Power
15 Amp (1710 Watts), 110 V / 60 Hz
(230 V / 60 Hz available)
Variable
Speed
Variable speed control from 1000 to
3800 RPM with tachogenerator for
constant speed, even under load
Speed With fi ne adjustment for using
Control Dial abrasives at optimum effi ciency
Wheel Width
Wheel Dia.
Weight
up to 4" (or 6" wide abrasives)
up to 4-1/2"
7.25 lbs. (3.3 kg)
VARILEX® WSF 1800 Angle Grinder
The most powerful speed-controlled angle
surface finishing and blending tool in its class
• Change discs in seconds,
without tools
• Variable speed control allows for exceptional
performance at low RPM – without motor
overheating or burnout
• Complete line of fl ap discs, cutting wheels, polishing and maintenance abrasives available
VARILEX® WSF 1800
Specifications
Order Number 65000A
Power
PLANTEX® discs are made
of 100% pure zirconium with
hemp fiber backing plate
• Self-trimming during
grinding process
• No fiberglass, mineral
compounds or epoxy resin
• High shape stability while
maintaining elasticity
40
•
15 Amp (1710 Watts),
110 V / 60 Hz
(230 V / 60 Hz available)
Variable Speed Infi nitely adjustable from 2000 to 7600 RPM
FIX Hook & Loop System Kits
Diameters
available. Kit includes a range
Spindle Thread
of 4-1/2" discs and polishing
compounds. Contact CS Unitec
Arbor Size
for more information.
Weight
1-800-700-5919
•
4" to 7"
5/8"-11 UNC
7/8"
6.2 lbs. (2.8 kg)
Visit our Web site at www.csunitec.com
Pipe Sanders
PIPE-MAX Pipe Belt Grinder
Combination pipe belt sander and
grinder for diameters up to 14"
• Sand pipes from small to large diameter, up to 14"
• Follows handrail contours to grind and polish
up to a high-gloss finish
• Remove weld seams from flat surfaces, leaving no edges
• Ideal for stainless steel, aluminum and highquality metals
• Powerful 15 Amp motor and variable-speed control from 950
to 3500 RPM (3/4HP pneumatic model available)
• Complete line of grinding wheels, belt sleeves, special
brushes, polishing and maintenance abrasives available
Electric or
Pneumatic
PIPE-MAX Specifications
Order Number 38502A
Abrasive grinding, surface conditioning fleece, ceramic
grinding, TZ pyramid and Super Polish belts available.
Exact belt size is 40mm x 780mm (1.5" x 30.7").
Contact CS Unitec for more information.
Power
15 Amp (1710 W) 110V
(220 V also available)
Belt Size (LxW) 30.7" x 1.6"
Belt Speed
Pipe ø max.
Weight
33 - 100 ft./sec.
14"
11.25 lbs.
LRP 1503 Boa Pipe Grinder
All-around polishing solution for handrails,
pipe and tubing
The LRP 1503 Boa Pipe Sander is the perfect solution for sanding
and polishing pipe constructions. The sanding arm snakes up to
270˚ around the radius of the pipe. The operator simply rotates the BOA slightly to achieve a full 360˚ finish. Spring resistance between the deflection rollers ensures that the sanding arm and
belt are always uniformly tensioned.
The BOA saves time finishing stainless steel and other ferrous and nonferrous pipe.
• Variable-speed control; 12 to
40 ft./sec. belt speed
• Maximum pipe Ø : 5" diameter
• Quick, tool-free replacement of
sanding belt
• High-quality 270˚ sanding arm is made of light alloy with two deflection rollers for quick progress, perfect
finish and simple operation
• Additional side handle can
be rotated 180˚ in narrow spaces
Electric or
Pneumatic
Boa Pipe Sander
Specifications
Order Number
LRP 1503 VRA
Power
11 Amp
Belt Size (LxW) 30" x 1-1/2" or 3/4"
Belt Speed
Pipe ø max.
Weight
12-40 ft./sec.
5"
8.2 lbs.
Pneumatic Model: LRP 1503 AIR
• 1 HP motor
• 28 ft./sec/ belt speed
• 20 CFM @ 90 PSI air consumption
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
41
Metal Deburring Machines
ROLEI® BE 5 Sheet Metal
Deburring Machine – 2 Speeds
Double-sided deburring of sheet metal up to 0.2" thick can be
achieved in a single operation with no additional treatment. The
machine’s flap wheels can be easily adjusted as they wear. One set of wheels lasts for approximately 6500 feet of stainless steel
sheet. Supplied standard with two 80 grit flap wheels, the ROLEI®
BE 5 can be used with other optional grits to suit the facet width
and materials of your particular application.
Features two-speed operation:
Speed 1: fine deburring, 600 RPM
Speed 2: standard deburring, 1200 RPM
Optional accessories:
• Spare flap wheels (40, 60, 80, and 120 grit) • Machine stand, made from strong steel
• Port for industrial dust extractor (part no. 30330)
ROLEI BE 5 Specifications
Order Number: 30310A (220 Volt)
30310 (380 Volt)
3-phase motor 220 - 240 V 3-phase / 2 speeds
.2 KW / .9 Amp
380 V 3-phase / 2 speeds
.2 KW / .45 Amp
Dimensions
Weight
Can also be used
on its side with
roller tables for
large thin sheets.
19.7" x 12.8" x 7.9"
64 lbs.
Options Machine stand, dust extractor
connection port, teflon tape
ROLEI BE 5 Flap Wheels
Part No.
37040
37060
37080
37120
Deburring on
both sides of
the sheet edges
Grit
40
60
80
120
Quantity
2 discs per pack
2 discs per pack
2 discs per pack
2 discs per pack
ROLEI® EF 115 Hand-held Deburring
and Faceting Machine
This handy deburring machine is designed for awkward,
heavy parts, such as machine tables, frame constructions
or large sheets of metal. Easy to handle, with good edge
control. The EF 115 is also ideal for chamfering welds.
Fixed beveling angle of 45˚, infinitely adjustable facet width from 0" to 3/8".
ROLEI EF 115 Specifications
Order Number: 30116
Universal motor 12.27 Amp (1350 W) 110 V / 60 Hz
(230 V / 50 Hz, 1600 W also available
Speed Infinitely adjustable
from 2,000 to 7,600 RPM
Weight
9 lbs.
Options
42
•
1-800-700-5919
Sliding guide rail, plastic
(P/N 30117, 2-piece set)
•
ROLEI EF 115 Flap Discs
Part No.
Grit
21050A
21060A
21080A
21120A
50
60
80
120
Visit our Web site at www.csunitec.com
Quantity
10 discs per pack
10 discs per pack
10 discs per pack
10 discs per pack
Metal Deburring Machines
ROLEI® EF 165 Beveling and Deburring Machine
For facets at an angle of 45˚
Beveling and deburring machine with a fi xed beveling angle of 45˚ and an infi nitely adjustable beveling width from 0" to 3/8" for all metals from stainless steel to aluminum. Precise adjustment of the
face width using a hand wheel.
ROLEI EF 165 Specifications
Order Number: 30101 (220 Volt)
30100 (380 Volt)
Motor
Dimensions
Support table
Weight
Options
220 V, single-phase
or 380 V, 3-phase
14" x 13" x 12"
5" x 13"
40 lbs.
Table extension, machine stand,
extraction port for dust extractor
connection
For spare flap discs, see PEF 500 below.
Optional dust
extraction port
P/N 30130
ROLEI® PEF 500 Beveling and Deburring Machine
For facets at angles of 30˚ and 60˚
Precision beveling and faceting machine
for all metals from stainless steel to
aluminum. Infi nitely adjustable beveling angle from 30˚ to 60˚ and infi nitely adjustable face width from 0" to 3/8"
(precise adjustment using knob).
Optional accessories:
• Extraction port for dust (P/N 30230)
• Sliding feed plate, plastic (P/N 30210)
• Spare fl ap discs (see below left)
ROLEI PEF 500 Specifications
Order Number: 30201 (220 Volt)
30200 (380 Volt)
ROLEI EF 165 and PEF 500
Spare Flap Wheels
Part No.
36060
36080
36120
Motor
Grit
Dimensions
60
80
120
Weight
Options
•
1-800-700-5919
220 V, single-phase
or 380 V, 3-phase
Parts are beveled with
perfect cross-grinding –
absolutely no opposite burr.
20" x 14" x 14"
88 lbs.
Machine stand, extraction port
for dust extractor connection
•
Visit our Web site at www.csunitec.com
43
Also Available from CS Unitec
CS Unitec, Inc. specializes in industrial power tools and safety tools for construction and industry.
Innovation and high quality are synonymous with CS Unitec's power tools. In 1991, the company invented the first pneumatic
portable band saw. CS Unitec has added to its list of industry firsts with the widest range of portable magnetic drills and hand-held
concrete core drills. The line also includes surface preparation tools for metal, concrete and masonry, air, electric and hydraulic
portable band saws, reciprocating saws, hack saws, nut runners, rotary hammer drills, rolling motors, non-sparking safety tools,
portable mixers and dust extraction vacuum systems.
… the power of innovation! ®
For tool specifications and ATEX and Ex Zone
information, visit www.csunitec.com.
Call 1-800-700-5919 or 203-853-9522 to request
any of the catalogs shown below.
View demo videos at
www.csunitec.com
Concrete Tools:
Metalworking Tools:
Surface Preparation Tools,
Concrete Grinders, Dust
Collection Systems, Diamond
Core Drills, Air Concrete Saws
and more
Portable Mixers:
Surface Preparation Tools, Dust
Collection Systems, Dry Cutting
Portable Saws, Portable Magnetic
Drills, Bridge Reamers and more
Portable Mixing Machines for
Mortar, Concrete, Plaster,
Flooring Adhesives, Grout,
Coatings, Paint, Self-Leveling
Compounds and more
Portable Saws:
Hacksaws, Reciprocating Saws,
Band Saws, Chain Saws, Cut-off
Saws and more
ALL PRODUCTS ARE
AVAILABLE THROUGH
EIBENSTOCK’S EXCLUSIVE
AGENT FOR NORTH AMERICA
Portable Magnetic Drills:
Surface Finishing Tools:
Non-Sparking Hand Tools:
Concrete & Masonry Tools:
Magnetic Drills & Accessories
Hand-held Drills and Drive Units
Nut Runners
Hammer Drills and more
High-performance tools and
accessories for grinding, sanding,
polishing, deburring and beveling
stainless steel, steel, nonferrous
metals, wood and more
Non-sparking Hand Tools
Power Tools for use in Ex Zones,
ATEX Zones and Hazardous
Environments
Power tools for the professional
contractor to drill, cut, grind and
smooth concrete, masonry, wood,
drywall and more – includes dust
collection tool systems
CS UNITEC, Inc.
22 Harbor Avenue, Norwalk, CT 06850
Phone 800-700-5919 • 203-853-9522 • Fax 203-853-9921
Email [email protected] • www.csunitec.com
View product demonstrations
at www.csunitec.com.
ALL SPECIFICATIONS ARE SUBJECT TO CHANGE
© Copyright 2016, CS Unitec, Inc., 04-16-10M
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement