Covidien Puritan Bennett 560 Ventilator User Manual

Below you will find brief information for Ventilator Puritan Bennett 560. The Puritan Bennett 560 Ventilator is a portable ventilator that can be used for a variety of applications, including home care, transport, and emergency situations. It features a variety of ventilation modes, including assist/control (A/C), SIMV, CPAP, and PSV. The ventilator also includes a built-in battery for use in the event of a power outage.

PDF Download
Document
Puritan Bennett 560 Ventilator User Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Portable ventilator
  • 多种通风模式
  • 内置电池
  • Alarm and troubleshooting
  • Cleaning and maintenance
  • Operational verification checklist
  • USB Menu Parameters
  • Oxygen administration
  • Air Inlet Filter
  • Battery Capacity

Frequently asked questions

The Puritan Bennett 560 Ventilator offers several ventilation modes, including Assist/Control (A/C), SIMV, CPAP, and PSV. Each mode serves a distinct purpose in supporting a patient’s respiratory needs. Refer to Chapter B, ‘Modes of Ventilation’ for detailed explanations of each mode.

To connect the Ventilator to an external DC power source, first, plug the DC power cable into the DC power port located on the back panel of the ventilator. Then plug the other end of the cable into a compatible DC power source.

The internal battery of the Puritan Bennett 560 Ventilator has a capacity that allows it to power the device for a certain duration, depending on the ventilator settings and usage. You can find the battery reserve capacity displayed on the ventilator screen, and the specific information can be found in Chapter 6, ‘Internal Battery’.

The air inlet filter should be replaced regularly to ensure optimal performance and prevent contamination. A recommended maintenance schedule for replacing the air inlet filter can be found in Chapter 8, ‘Routine Maintenance’.

An operational verification checklist should be conducted periodically to ensure the ventilator is functioning correctly. The checklist includes various tests such as low pressure, circuit check, power failure, occlusion, and battery tests. Detailed instructions for performing these tests are provided in Chapter C, ‘Operational Verification Checklist’.

You can transfer ventilation data, such as continuous readings and trends, from the Puritan Bennett 560 Ventilator to a USB memory device. Instructions on how to transfer data can be found in Chapter 5, ‘Operating Procedures’.
ALP:
Preparing document for printing…
0%