Interlogix NX-540E
Intrusion
NetworX
“Operator”
Telephone
Interface Module
OVERVIEW
The NetworX “Operator” Telephone Interface Module is a
microcomputer controlled telephone interface module that may
be added to NetworX control panels. The “Operator” converts
any touchtone telephone to a system keypad and allows
system functions to be accessed via telephone on premise
or off-site. There are 48 separate zone descriptions that may
be programmed to fit the owner’s needs. Each zone/output
description is programmable using the 182-word library list.
STANDARD FEATURES
Specifications
Operating power
nominal
Current
Control outputs
Dimensions (W x L x H)
Telephone requirement
Regulatory
12VDC supplied by control panel
Standby 55mA
Active 130mA
32 X10 outputs with programmable descriptions
3.5 x 6.0 x 1.0 in.
Touchtone telephones only
FCC part 15, Class B verification requirements,
and FCC Part 68 Modification
FCC Registration Number: GCQUSA-30138-AL-E
Ordering Information
NX-540E
"Operator" Telephone Interface Module
• Converts any touchtone telephone to a system keypad
• Allows system functions to be accessed via telephone
on or off-site
• Each zone/output description is programmable using
the 182 word library list
• Compatible with the NX-6, NX-8 and NX-8E control panels
interlogix.com
Specifications subject to change without notice.
North America
T 855-286-8889
Latin America
T 561-998-6114
© 2014 United Technologies Corporation.
All rights reserved.
Interlogix is part of UTC Building & Industrial Systems,
a unit of United Technologies Corporation.
306-3677
2014/03
(75051)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement