null  null
INSPIRED BY COMFORT
Cruisair®
PRODUCT GUIDE
FOR LEISURE BOATS, WORKBOATS, AND
COMMERCIAL AND MILITARY VESSELS
Includes Specification Sheets for:
Direct Expansion and Tempered Water Air Conditioning, Controls, and Accessories, Eskimo
Ice Systems, Spot Zero Water Purification, and Dometic Livos Ship-Wide Ventilation Systems
L-0001
LB-01
Rev. 20141209
Table of Contents
LIT. ID#
REV. DATE
DESCRIPTION
PAGE #
SELF-CONTAINED AIR CONDITIONING
LIT. ID#
REV. DATE
L-2502D
2013/02/22
Stowaway Turbo Series Boat Air Conditioning
7
L-3206
L-2425D
2014/01/17
Cuddy dc Boat Air Conditioning Kit
9
SHIP-WIDE VENTILATION
L-2619
2013/06/28
The Breeze Low-Profile Boat Air Conditioner
11
L-3283
L-2663
2013/06/07
Stowaway Compact Series Boat Air Conditioning
13
SPLIT-GAS AIR CONDITIONING
L-2702A
2012/08/03
Emerald Series (6K-16K) Condensers
15
L-2702B
2012/08/03
Emerald Series (24K-72K) Condensers
17
L-2695B
2012/08/03
Emerald TurboVap Series Evaporators
19
L-2854
2012/08/03
EBE Series R-410A Evaporators
21
L-0717
2013/05/31
EBLE Series Low-Profile Evaporators
23
L-0980
2014/01/17
EBDE Series High-Capacity Evaporators
25
L-2431
2013/01/11
R Series (5K-16K) Condensing Units
27
L-2360
2013/01/18
R Series (20K-48K) Condensing Units
29
L-2695A
2012/08/03
TurboVap Series Evaporators
31
L-2366
2013/02/22
RM Series Modulating Condensing Units
33
L-0954
2013/01/11
EMB/EHMB Series Modulating Evaporators
35
L-2629
2013/12/06
CoolBreeze Boat Exterior Cooling Kits
37
CHILLED WATER AIR CONDITIONING
L-2430
2013/11/22
TWCV Series Modular Chillers
39
L-2627
2013/02/15
MTDV Series Modular Chillers
41
L-0596
2013/01/25
MTC Series Modular Chillers
43
L-2638
2012/08/24
MTS High-Capacity Modular Chillers
45
L-3021
2014/01/17
Gold Series (AU-HV) Air Handlers
47
L-2354
2014/01/17
AT-HV Series Air Handlers
49
L-2426B
2012/08/24
AT-DC Series Air Handlers
51
L-2553
2012/12/07
ATL-HV Series Low-Profile Air Handlers
53
L-2548
2013/09/20
ATL-DC Series Low-Profile Air Handlers
55
L-2555
2012/06/22
ABL-HV Series Chilled Water Air Handlers
57
L-2561
2012/08/24
ABL-DC Series Air Handlers
59
L-2566
2012/08/24
ATV-HV Series Slim-Profile Air Handlers
61
L-2563
2013/03/29
ATV-DC Series Slim-Profile Air Handlers
63
L-3016
2013/02/15
ATV “4-Pipe” Series Slim-Profile Air Handlers
65
L-2403
2013/06/07
AT-HV-MU Series Fresh Air Make-Up Air Handlers
67
CHILLED WATER CONTROLS
L-3233
2014/01/17
Smart Touch Chiller Control
69
L-2057
2012/08/24
Tempered Water Logic Control
71
CABIN CONTROLS
L-2642
2013/02/22
Q-Logic Cabin Control System
73
L-2088
2013/05/31
SMX Cabin Control Systems
75
L-2376
2013/05/31
SMXht Keypad/Display
77
L-0488
2013/05/31
SMXIIAB Keypad/Display
79
L-0243
2012/08/24
Electromechanical Rotary Switch Controls
81
AIR CONDITIONING ACCESSORIES
L-0956
2013/05/31
Accessories for DX Modulating Air Conditioning
83
L-2701
2013/10/11
Breathe Easy™ In-Duct Air Purifiers
85
L-2712
2013/12/13
Breathe Easy™ Portable Air Purifier
87
L-2698
2013/06/21
Breathe Easy™ Microparticle Air Filters
89
L-2700
2012/08/24
SmartStart™ Soft Starter
91
L-3000
2013/08/23
WhisperFan Controller
93
L-2263
2013/09/13
March Marine Seawater Pumps
95
L-0242
2013/11/22
Heavy-Duty Seawater Pumps
97
L-0420
2013/01/04
Centrifugal Circulating Water Pumps
99
L-0373
2013/05/17
Pump Relays for DX Air Conditioning
101
L-2565
2012/08/24
Pump Packages for Chilled Water Systems
103
L-2413
2013/09/20
Variable Frequency Drives (Standard)
105
L-0622
2013/04/19
HMDL Series Auxiliary Heat Modules
107
L-0239
2014/01/17
Air Distribution Components
109
Dometic EnviroComfort Retrofit Kits (R-410A)
111
DOMETIC MARINE AIR CONDITIONING
L-3003
2014/01/17
AIR-COOLED AIR CONDITIONING
L-3010
2013/01/18
DuraSea Rooftop Air-Cooled Air Conditioner
113
L-2544
2013/02/22
DuraSea Series Air-Cooled Condensers
115
ESKIMO ICE FISHBOX ICE SYSTEMS
L-3076
2013/05/31
Eskimo Ice EI540D Fishbox Ice System
117
L-3118
2013/05/31
Eskimo Ice EI1000D Fishbox Ice System
119
L-3230
2013/08/16
Dometic Eskimo Ice Diverter
121
L-3229
2013/08/16
Dometic Eskimo Ice Pusher
123
2013/11/22
HZB Series Portable Ice Makers
125
ICE MAKERS
L-3209
DESCRIPTION
PAGE #
Dometic Spot Zero Water Purifier Systems
127
Dometic Livos Ship-Wide Ventilation Systems
129
WATER PURIFIERS
2014/01/17
2014/01/17
PLANNING AN AIR CONDITIONING SYSTEM FOR YOUR BOAT
Understanding Air Conditioning
Figure 1: Self-Contained Air Conditioning
Digital
Control
The basic principle of any air conditioner is the transfer of heat from
one element to another. In a seawater-cooled air conditioner, heat is
transferred from the cabin air to the refrigerant gas to the seawater. In
heating mode, the refrigerant flow is reversed and heat is transferred
from the seawater to the refrigerant gas to the cabin air.
In addition to lowering the air temperature, moisture (humidity) is also
removed. Drier air feels more comfortable, helps keep the boat dry, and
reduces mold growth and other moisture-related problems.
The Effects of Seawater Temperature
The efficiency of the system is dependent on both the seawater and
cabin temperatures. In cooling, the air conditioner works best when
the seawater temperature is below 90°F (32°C). At higher water
temperatures the unit will operate, but at reduced capacity. As the
water temperature rises, so does the refrigerant gas pressure. A highpressure safety switch will shut the unit down if the water temperature
gets too hot, or there is a loss of cooling water flow.
Digital
Control
Pump
Self-Contained
Air Conditioner
Figure 2: Split-Gas Air Conditioning
Digital
Control
Supply
Air Grilles
Ducting
Return
Air Grille
Electrical
Box
Self-Contained DX Systems (see Figure 1)
Condensing
Unit
■■
A single unit can cool one cabin or it can be ducted to two or more
cabins to save space and cost.
■■
Best choice for boats under 40 ft. (12 m) due to lower cost of units
and available installation space.
Split-Gas DX Systems (see Figure 2)
■■
Major components are split between two units that are installed in
different locations and connected by insulated, copper refrigerant
tubing.
■■
Condensing unit (compressor, seawater condenser, and electrical
components) mounts in engine room or other mechanical space.
■■
Evaporator unit installs in living area(s). Two evaporators can
connect to one condensing unit to cool multiple cabins or a single
large area.
■■
Evaporators require less space in the living area and are quieter
because they do not have a compressor.
■■
Ideal for boats up to 80 ft. (24 m). Maximum length of refrigerant
tubing between the condenser and air handlers is 50 ft. (15 m) and
system must be charged with refrigerant by a certified technician.
Evaporating
Units
Pump
Evaporating
Unit
Return
Air Grilles
Figure 3: Chilled Water Air Conditioning
Digital
Control
Supply
Air Grilles
Ducting
Return
Air Grille
Multi-Stage
Chiller
Manifold
Air Handler
Chilled Water Systems (see Figure 3)
■■
Chiller unit in the engine room cools (or heats) fresh water that is
pumped through an insulated piping loop to air handlers located in
the living spaces that cool (or heat) the air.
■■
Chillers offer flexible load management and a reduced peak electrical
load.
■■
Best for boats over 80 ft. (24 m). There is no limitation on the number
of air handlers in a system, or on the distance from the chiller to the
air handlers.
Self-Contained
Air Conditioner
Return
Air Grilles
The Three Types of Marine A/C Systems
All major components are mounted on a single chassis installed in
the living area — usually under a bunk or settee or in a locker.
Duct
Return
Air Grille
In heat mode, the opposite is true. As the seawater temperature gets
colder, there is less heat available and heating performance drops.
Full heating capacity is available in water temperatures as low as 55°F
(13°C), but drops to about 50% capacity in 40°F (4.4°C) water. Below
this, the refrigerant pressure can be so low that the unit will not produce
heat, (or may shut down on low-pressure fault, if this option is installed).
■■
Supply
Air Grille
Supply
Air Grilles
Pumps
Return
Air Grilles
Air
Handler
4
Factors That Determine the Type of Air
Conditioning System You Need
1.Size and layout of the boat for calculating required system capacity.
2.Access for routing tubes/wires/hoses.
3.Location of furnishings.
A self-contained unit or air handler must be located so the discharge
ducting can be routed to a high point in the cabin. Rotate the blower to
create the most direct path for routing the discharge duct. Poor airflow
may result from a ducting run of over 15 ft. (4.5 m) or a ducting run with
many bends. Plan for the shortest possible ducting run while limiting the
number of bends.
How to Size Your A/C System
Step 4: Seawater Components. Use one pump of adequate capacity
for all air conditioning systems on board. The basic rule is 180
gallons (681.4 liters) per hour (3 GPM/11.4 LPM) of water per ton of
air conditioning (one ton = 12,000 BTU/hr). If more than one system
shares a common pump, you will also need a pump relay and manifold.
Step 1: Find the required capacity by dividing the vessel into three main
load areas:
The BTU/hr capacity in Table 2 shows recommended seawater flow
rates and minimum inlet (through-hull) sizes.
4.Storage space to sacrifice.
5.Cost.
■■
Below Deck: Cabins where the hull slopes inward toward the keel
with minimal port lights and hatches.
■■
Mid Deck: Areas on main deck with small or shaded windows.
■■
Above Deck: Areas with large glass surfaces and direct sunlight.
Multiply the length and width of each cabin to be treated to determine
the area in square feet or square meters. It is assumed the boat has
an average headroom of about 6.5 ft. (2 m) with an average amount of
furniture. If one end of the cabin is narrower than the other, take your
measurement in the middle.
Using Table 1, multiply the area of each cabin by the appropriate load
factor to find the required air conditioner capacity. For example, if your
boat is in a temperate climate and you are measuring in square feet,
you would multiply your total below-deck area by 60, your mid-deck
area by 90, and your above-deck area by 120. (A temperate climate
generally has 95°F (35°C) air and 85°F (35°C) water with moderate
humidity; a tropical climate averages 105°F (41°C) air and 95°F (35°C)
water with high humidity.)
Table 1: Load Factors (BTU/hr per ft )
2
Table 2: Pump Sizing Chart by BTU/hr Capacity
System Capacity
(BTU/hr)
Seawater Flow
Rate(3) (GPH/LPH)
Through-Hull
Inlet Size (in/mm)
5,000 - 12,000
180/681
0.50/13
16,000 - 24,000
360/1363
0.75/19
30,000 - 48,000
720/2726
1.00/25
(3)
Allow for a reduction in capacity of 17% if using a 60Hz pump at 50Hz.
Step 5: Determine the proper duct diameter (Ø) and grille sizes for your
air conditioning system. Use Table 3 to find the correct sizes, which are
based on the system’s BTU/hr capacity.
Table 3: Duct and Grille Sizing Chart by BTU/hr Capacity
Air Handler
(BTU/hr)
Duct Ø
(in/mm)
Return-Air
Grille (ft2/cm2)
Supply-Air
Grille (ft2/cm2)
4,000
4/102
64/413
32/206
6,000
4/102
64/413
32/206
Below-Deck
Load Factors
Mid-Deck
Load Factors
Above-Deck
Load Factors
9,000
6/152
98/632
49/316
10,000
6/152
100/645
60/387
Temperate
60
90
120
12,000
6/152
130/839
70/452
Tropical
80
120
150
16,000
7/178
160/1,032
80/516
18,000
7/178
200/1,290
100/645
24,000
9/229
240/1,548
140/903
30,000
10/254
350/2,258
170/1,097
36,000
10/254
360/2,323
196/1,265
Climate
Step 2: Taking into account the boat’s size and layout, determine the
number of self-contained systems or air handlers needed.
Find out which cabins or areas will benefit best from a dedicated
thermostat control, and which cabins can be served by ducting or
a secondary air handler (where the only temperature control is an
adjustable grille or fan-speed control).
Other A/C System Components
Step 3: Taking into account the boat’s size and layout, determine the
location of each self-contained system or air handler.
A complete air conditioning system requires controls, a seawater
cooling system, an air-distribution system and electrical connections.
In addition to leaving enough room for plumbing and ducting, there
must also be sufficient space in each installation location for servicing
and/or removal of the unit.
Controls
A self-contained unit or air handler must have an open return-air path.
However, the return-air grille does not need to be directly in front of the
unit. In fact, the system will be less noisy if there is an indirect path for
the return air to follow. Never install the unit in the bilge or engine
room or where vapors from these areas could reach the unit.
There are two types of controls: digital and electro-mechanical switch.
■■
■■
Digital: These keypad/displays are part of a microprocessor system
with many advanced functions, including automatic fan-speed
control, fault display, and a dehumidification program. Decorative
bezels can be added to complement the vessel's interior decor.
Mechanical: These manual switches with two or three rotary knobs
control the mode of operation, thermostat, and variable fan speed.
Reverse-cycle models have automatic changeover between heating
and cooling.
PLANNING AN AIR CONDITIONING SYSTEM FOR YOUR BOAT
Seawater Cooling System
Figure 6: Installation of An Air Handler In a Closet
The seawater cooling system brings seawater into and through the
system then discharges it overboard. It consists of an inlet through-hull
fitting, seacock (water valve), strainer, pump, and overboard discharge
fitting, all connected by hose or piping (see Figure 4).
Figure 4: Correct Plumbing of a Seawater-Cooling System
Plenum
Supply-Air
Grille
Flexible
Insulated
Duct
Air Conditioning Unit
Seawater Outlet
Water Line
Seawater
Pump
Seacock
Air Handler
or Evaporator
Return-Air
Grille
Thru-Hull
Inlet Fitting
Strainer
Vessel Hull
If multiple air conditioning units are served by a single seawater pump,
then a pump relay and water manifold are required. A centrifugal
seawater pump is recommended for efficient, quiet operation and long
life. Centrifugal pumps are not self-priming and must be mounted below
the water-line (install a self-priming pump for shallow-draft boats).
It is important that the seawater plumbing be self-draining, meaning
that if the boat is lifted, all water in the piping will drain out. An air
conditioning system plumbed this way will have no air locks which could
disrupt the flow of seawater.
Air-Distribution System
In cooling mode, warm cabin air is drawn into the self-contained unit
or air handler through a return-air grille. It is then cooled and blown
through flexible insulated duct and back into the cabin through a supplyair grille installed high in the cabin. The supply-air grille should be
installed away from the return-air grille to ensure good circulation.
Plenums, or transition boxes, can be installed in the duct to split the air
flow into multiple ducts to serve one or more cabins.
Electrical Connections
Marine Air air conditioning systems are available for use with common
power supplies throughout the world. In the United States and most
of North and South America, the systems are 115 or 230VAC, 60Hz,
single phase. In Europe and most of Asia, systems are typically
230VAC, 50Hz, single phase.
Running and starting loads of an A/C system are often the largest
electrical loads on a boat. It is important that the power supply system
is large enough to handle these loads, and is installed properly. Always
follow local codes or ABYC codes for proper wiring guidelines. Contact
a Marine Air dealer if you have any special power requirements.
The voltage rating of an air conditioner is a nominal rating. The actual
voltage in a given location may be higher or lower by as much as 10%
and the system will run fine. Table 4 below shows nominal compressor
ratings and the acceptable range of available power.
Table 4: Compressor Electrical Specs
Figure 5: Installation of a Self-Contained System Under a Bunk
Plenum
Supply-Air
Grille
Self-Contained A/C Unit
or Air Handler
Nominal Rating
Acceptable Range
230V/60Hz/1-ph.
208-240V/60Hz/1-ph.
220V/50Hz/1-ph.
220-240V/50Hz/1-ph.
230V/60Hz/3-ph.
208-230V/60Hz/3-ph. and 190-220V/50Hz/3-ph.
220V/50Hz/3-ph.
200-220V/50Hz/3-ph.
460V/60Hz/3-ph.
440-480V/60Hz/3-ph. and 380-420V/50Hz/3-ph.
380V/50Hz/3-ph.
380-420V/50Hz/3-ph.
Using a Generator
Return-Air Grille
If running your boat's electrical systems on a generator, make sure
the generator can handle the large starting inrush current of the air
conditioning compressor. Use of a Dometic SmartStart™ Soft Starter
is highly recommended to smooth out the compressor startup power
demand and ease strain on the generator.
Take the product specification sheets to your generator supplier and
ask for their help.
6
SELF-CONTAINED AIR CONDITIONING
ed y
n t og
t e ol
Pa hn
c
Te
Stowaway Turbo Series Boat Air Conditioning
Powerful, Quiet & Compact With No Drain Pan Worries
Key Benefits
The Stowaway Turbo series completely revolutionized self-contained boat air conditioning (cooling
and heating) with patented innovations in marine air conditioning system design, winning the IBEX
Innovation Award in 2007.
■■
Up to 27% more energy efficient
■■
Up to 21% increased capacity
■■
Compact design uses less space
■■
Rust-free composite drain pan
■■
Up to 85% less standing water in the
drain pan
■■
Vibration-isolation mounts reduce noise
and vibration
■■
Engineered to maximize the performance
of R-410A, an environmentally safe
refrigerant
■■
Designed from the inside out with multiple
patented innovations
■■
Optional sound cover further reduces
compressor noise by up to 50%.
The rust-free molded composite drain pan has three drains for the rapid removal of condensate
water. The drain pan has a small footprint for installation flexibility.
Product Testimonial
A vibration-isolation mounting system results in significantly quieter, virtually vibration-free
performance. The enclosed blower motor eliminates overhang for reduced depth.
"There is very little noise coming from the
compressor, and vibrations are practically
non-existent. I highly recommend this unit."
The Turbo series was specifically engineered to harness and maximize the impressive
performance of R-410A, a proven and environmentally safe refrigerant gas.
—— Bob Silverman, boat owner
The optional Turbo sound cover provides up to 50% further noise reduction. This compact, easy-toinstall sound cover completely encases the compressor to provide a 3- to 5-dB reduction in noise.
Available for all Turbo models, the sound cover installs in minutes. Mounting hardware is included.
Optional sound cover further
reduces compressor noise by
up to 50%.
ISO 9001:2008
L-2502D
Rev. 20130222
80/517
5/8 /16
45.5/20.7
35/15.9 48/21.8
53.75/24.4 53/24.1 43/19.6 56.75/25.8
8.8/224
6.5/166
2.7/69
64/413
5/8 /16
42.5/19.3 33/14.1
50.75/23.1 41/18.6
8.8/224
6.5/166
2.7/69
2.7/69
6.5/166
8.8/224
5/8 /16
100/646
60/388
6/153
20.4/519
12.4/315
14/356
25
16
410A
12.2/310
13/331
48/310
10
7
32/207
20
13
410A
10.8/275
11.1/282
42
1.14
8.8
5/127
6
17.7
0.83
4.1
6.7
4/102
10
7
15
12
410A
10.8/275
11.1/282
36
0.7
4
3.2
17.6/448
10.7/272
17.7
36
1.31
7.1
3.1
240
50/1
13.4/341
0.36
0.8
3.7
5.5
230
STQ10
10000
115
60/1
17.6/448
10.7/272
2.8
5.9
2.7
240
50/1
STQ8
8000
115
60/1
13.4/341
2.2
230
4.6
STQ6
6000
115
60/1
21.4/544
13.3/338
12.9/328
13.4/341
10
8
21
0.48
4.3
3.2
240
50/1
41/18.6 45/20.5
49/22.3 53/24.1
15
10
22
0.61
3.9
3.3
230
28
0.61
5.1
4
230
2.7/69
6.5/166
8.8/224
49/22.3
60/27.3
5/8 /16
130/839
70/452
6/153
20.4/519
12.4/315
14/356
52.25/23.8
61.25/27.8
30
15
20
11
410A
12.2/310
12.25/312 12.5/318
58
1.14
10.9
8.7
STQ12
12000
115
60/1
L-2502D Rev. 20130222
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
5/8 /16
160/1033
80/517
7/178
21.3/542
13.3/338
14/356
40
25
410A
12.9/328
13.4/341
62
1.61
13.6
10.4
2.7/69
6.5/166
8.8/224
52/23.6 59.5/26.1
61/27.7 68.25/30.1
10
8
21
0.48
4.3
3.3
240
50/1
STQ16
16000
115
60/1
15
11
22
0.56
5.9
4.5
240
50/1
Environmentally
Responsible
0/24.1
58.25/26.5
70.25/27.7 67.5/30.7
21.4/544
20
12
34
0.78
6.6
5.1
230
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 Add a ‘C’ for 230V/60Hz units or ‘CK’ for 220-240V/50Hz units. For example: STQ8=115V/60Hz; STQ8C=230V/60Hz; STQCK=220-240V/50Hz
2 BTU and electrical data are based on a 45°F/7.2°C evaporator and 100°F/37.8°C condenser in cool mode, and a 45°F/7.2°C evaporator and 130°F/54.4°C condenser in heat mode.
3 60Hz units must not operate at 50Hz and 50Hz units must not operate at 60Hz unless data plate states otherwise.
4 All dimensions ± 0.30 in. (8 mm).
5 All weights ± 10%
Model (1)
Capacity (BTU/h) (2)
Voltage (V)
Cycle (Hz) (3) /Phase (Ph)
Full Load Amps (FLA)
Cool (A)
Full Load Amps (FLA)
Heat (A)
Full Load Amps (FLA)
Blower (A)
Locked Rotor Amps
(LRA) (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Refrigerant Type
Min. Height (in/mm) (4)
Max. Height (in/mm) (4)
Height w/Opt. Sound Cover
(in/mm) (4)
Width (in/mm) (4)
Max. Depth (in/mm) (4)
Min. Supply Duct Size
(in/mm)
Min. Supply Air Grille Size
(sq in/sq cm)
Min. Return Air Grille Size
(sq in/sq cm)
Seawater Inlet Connection
(in/mm)
Net Weight (lbs/kg) (5)
Gross Weight (lbs/kg) (5)
Height-Electrical Box
(in/mm)
Width-Electrical Box (in/
mm)
Depth-Electrical Box (in/
mm)
Specifications for Stowaway Turbo Series Boat Air Conditioning
Assembled in the USA
Dealer
Width
Dimensions
Min.
Height
Max.
Height
Depth
8
SELF-CONTAINED AIR CONDITIONING
SELF-CONTAINED AIR CONDITIONING
by
ed s
er rie
w tte
Po Ba
Cuddy dc Boat Air Conditioning Kit
Easy & Affordable DC-Powered Air Conditioner
Key Benefits
The Cuddy dc kit includes a 3,500 BTU/hr self-contained air conditioner, pump, electro-mechanical control, and
dedicated power module (DPM)
The Cuddy dc is a compact 3,500 BTU/hr cool-only air conditioner designed to work with 12V
power systems. Energized by a dedicated bank of batteries and a dedicated power module (DPM),
the Cuddy dc makes your small cabin a refuge from the heat and sun. Compact—about the size of
a typical battery box—this low-profile unit easily fits beneath a V-berth or in a storage area below
deck. The Cuddy dc uses R-134A, a globally accepted, environmentally safe refrigerant.
The customer's dedicated 12V DC battery bank powers the system via the DPM, which is included
with the Cuddy dc kit. Two ABYC-approved wires (sized properly for your unique installation) run
from the dedicated battery bank to the DPM. Easy-to-use polarized plugs connect the DPM to the
seawater pump and the Cuddy dc unit. Optional cables are available for longer runs if your setup
requires more than the standard 4.5 ft. (1.37 m) cable included with the kit.
To operate the system, the Cuddy dc uses a simple two-knob mechanical control. Since it draws
no power itself, the mechanical control maximizes runtime and efficiency. The Cuddy dc system
(compressor, blower, and pump) draws about 29 amps of DC power under normal operating
conditions. Supplemental DC power comes to you via engine power (if available) or via shore
power through a battery charger.
The customer must provide the right type of batteries and battery charger. Use only deep-cycle
AGM or gel-cell batteries. Do not use wet-cell batteries. The battery charger must be rated for the
type of battery you use. The Cuddy dc requires a dedicated battery bank. To maximize runtime, we
recommend using at least two batteries in the bank. The more cells, the longer the runtime. All
batteries used must be of the same type - all AGM or all gel-cel - and the same age.
ISO 9001:2008
L-2425D
Rev. 20140117
■■
Designed for small cabins
■■
Operates via simple 12V DC connection
■■
3,500 BTU/hr cool-only system
■■
Compact - about the size of a battery box
■■
High-velocity blower with split capacitor
for greater airflow
■■
Stainless-steel chassis
■■
Simple two-knob mechanical control
maximizes efficiency and runtime
■■
Minimal DC draw - about 29 DC amps
total
■■
No genset needed
■■
Air distribution kits available
3500
29
134A
9.25/235
15/381
8/204
29/13.2
Capacity (BTU/h)
Amps @ 12V DC (A) (1)
Refrigerant Type
Height (in/mm)
Width (in/mm)
Depth (in/mm)
Net Weight (lbs/kg)
Dedicated Power Module
(DPM)
N/A
N/A
N/A
5.13/131
10/254
2.67/68
3/1.4
N/A
N/A
N/A
5.5/140
3.25/83
2.75/70
2/0.1
MCP 2-Knob Control
N/A
N/A
N/A
2.75/70
3.5/89
4.75/121
TBD
PML150 Seawater Pump
Height
Depth
L-2425D Rev. 20140117
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
■■
■■
■■
■■
■■
Environmentally
Responsible
Assembled in the USA
Dealer
10 ft. (3 m) DPM to Cuddy extension cable
20 ft. (6 m) DPM to Cuddy extension cable
10 ft. (3 m) pump to Cuddy extension cable
Air distribution kit in black (includes 3 in. (76 mm) supply air grille, 8x8 in. (203x203 mm)
return air grille, and 10 ft. (3 m) of flexible insulated duct)
Air distribution kit in white (includes 3 in. (76 mm) supply air grille, 8x8 in. (203x203 mm)
return air grille, and 10 ft. (3 m) of flexible insulated duct)
Accessories for Cuddy dc Kits
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
Width
Dimensions
1 Approximate value shown and includes amp draw for the compressor, blower, and seawater pump. Actual load is dependent upon humidity, seawater temperature, battery condition, voltage, and the
integrity of the electrical connections.
Cuddy Cool CD3.5HV
Model
Specifications for Cuddy dc Boat Air Conditioning Kit
10
SELF-CONTAINED AIR CONDITIONING
1
SELF-CONTAINED AIR CONDITIONING
O
y
nl
8
.
in
H
h
ig
The Breeze Low-Profile Boat Air Conditioner
Designed for Unique & Height-Restrictive Installations
Key Benefits
The Breeze low-profile self-contained boat air conditioner is designed for unique applications.
Thanks to the innovative horizontal compressor and dual high-velocity tangential blowers, it can be
installed in height-restrictive spaces, making it ideal for flybridge, cockpit, engine room, or exterior
deck installations.
The Breeze delivers 16,000 BTU/hr of cooling and heating in a package that stands just eight
inches (203 mm) high. The dual blowers can be ducted to different areas or to confined areas such
as flybridge dashboards and consoles.
The Breeze features an oversized four-row evaporator coil for excellent heat removal under low
fan-speed conditions. A highly efficient blower reduces power consumption, and the blower flows to
two outlets.
The Breeze is available as a low-profile evaporator only (EDLE units) to work with Cruisair R-410A
remote condensers.
Thanks to the unique
horizontal compressor, these
low-profile units stand only 8
in. (203 mm) high.
ISO 9001:2008
L-2619
Rev. 20130628
■■
Stands only 8 in. (203 mm) high
■■
Unique horizontal compressor
■■
16,000 BTU/hr cooling and heating
■■
High-efficiency, ductable dual tangential
blowers
■■
Ideal for flybridge, cockpit, and on-deck
installations
■■
Engineered to maximize the performance
of R-410A, an environmentally safe
refrigerant
■■
304-grade stainless-steel drain pan for
long service life
■■
Stainless-steel condensate drains for
excellent water removal
■■
Electrical box can be remotely mounted
up to 5 ft. (1.52 m)
■■
Special corrosion-resistant coating on
blower and housing
■■
Oversize four-row evaporator coil for
excellent heat removal under low-fan
speed conditions
■■
Available as low-profile evaporator only
(EDLE units) to work with Cruisair remote
condensers
SQL16
16000
115
60/1
12.8
15.5
2
63
40
24
410A
8/204
30.25/769
14/356
7/178
80/517
160/1033
5/8 /16
65/29.5
74/33.6
4.7
6.2
0.86
29
20
14
230
71/32.3
80/36.3
106/684
240
50/1
4.42
5.82
0.62
26
15
11
EDLE16
16000
115
60/1
1.5
N/A
2
N/A
5
2
N/A
7.4/188
22.25/566
11/280
7/178
80/517
160/1033
N/A
19/8.7
29/13.2
L-2619
Rev. 20130628
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
1
0.86
0.62
230
Environmentally
Responsible
Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 BTU and electrical data are based on a 45°F/7.2°C evaporator and 100°F/37.8°C condenser in cool mode, and a 45°F/7.2°C evaporator and 130°F/54.4°C condenser in heat mode.
2 60Hz units must not operate at 50Hz and 50Hz units must not operate at 60Hz unless data plate states otherwise.
Model
Capacity (BTU/h) (1)
Voltage (V)
Cycle (Hz) (2) /Phase (Ph)
Full Load Amps (FLA) Cool (A)
Full Load Amps (FLA) Heat (A)
Full Load Amps (FLA) Blower (A)
Locked Rotor Amps (LRA) (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Refrigerant Type
Height (in/mm)
Width (in/mm)
Depth (in/mm)
Min. Supply Duct Size (in/mm)
Min. Supply Air Grille Size (sq in/sq cm)
Min. Return Air Grille Size (sq in/sq cm)
Seawater Inlet Connection (in/mm)
Net Weight (lbs/kg)
Gross Weight (lbs/kg)
Specifications for The Breeze Low-Profile Boat Air Conditioner
Assembled in the USA
Width
Dealer
Height
Depth
12
SELF-CONTAINED AIR CONDITIONING
1
SELF-CONTAINED AIR CONDITIONING
ith
W 0A
ow 1
N R- 4
Stowaway Compact Series Boat Air Conditioning
High-Capacity Air Conditioning In a Compact Package
Key Benefits
■■
Compact design reduces unit size by up
to 25% of the original Vector Rotary's size
■■
High-velocity (HV) fully-insulated blowers
are rotatable
■■
Blowers are rotatable and fully insulated
■■
Patented design increases cooling
capacity and dehumidification
■■
Engineered to maximize the performance
of R-410A, an environmentally safe
refrigerant
■■
Unique compressor and reversing valve
mounting reduces vibration
The 27,000 BTU/hr Compact unit with painted galvanized metal chassis
■■
The Stowaway Compact series of self-contained marine air conditioners offers 18,000 and 27,000,
and 30,000 BTU/hr of reverse-cycle cooling and heating.
Electrical box is installed within unit
footprint on 18K and 27K models;
remotely mounted for 30K models
■■
High-efficiency rotary and scroll
compressors are quiet and more reliable
■■
Condenser coil's cupronickel-encased
copper condenser coil provides maximum
heat transfer and high resistance to
corrosion
■■
Evaporator coil employs an enhanced fin
design and rifled copper tubing to provide
maximum capacity
■■
27K and 30K models available in 3-phase
power on a special order basis
These high-capacity units were engineered to harness and maximize the impressive performance
of environmentally safe R-410A refrigerant. Used in the HVAC industry for more than 10 years,
R-410A is proven and reliable, complies with all EPA standards, and is accepted worldwide.
All models offer direct expansion operation in a compact, low-profile unit, with a seawater-cooled
condenser and choice of controls. Stowaway Compact units are designed for installation under a
settee or berth, in a locker or cabinet, or other convenient location.
Stowaway Compact systems feature high-velocity (HV) blowers. All blowers are insulated to
prevent secondary condensation, and are fully rotatable for flexibility during installation. A painted
galvanized metal chassis is standard on 18K and 27K models; a stainless-steel chassis upgrade is
available for enhanced durability.
The SQUF30 features dual evaporator coils and a single compressor on a compact stainless-steel
chassis. The dual high-velocity (HV) blowers can be ducted to two or more interior spaces.
The dual-blower 30,000 BTU/
hr unit with stainless-steel
chassis.
ISO 9001:2008
L-2663
Rev. 20130607
SQUF18
18000
115
60/1
11.1
15.1
1.93
66
45
27
410A
14/356
15.5/394
12/305
21/534
7/178
100/646
200/1291
5/8 /16
6.4
8.3
1.15
32
20
13
230
26
220
50/1
5.75
7.05
SQUF27
27000
230
60/1
8.1
11.1
1.64
58.3
45
27
410A
18/458
19.25/489
15.25/388
24.75/629
8/204
140/904
240/1549
5/8 /16
60
40
24
220
50/1
7.6
11
SQUF30
30000
230
60/1
9.7
12.8
1.76
53
35
20
410A
N/A
17/432
25/635
26.5/674
5/127
150/968
250/1613
5/8 /16
L-2663
Rev. 20130607
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
67
40
26
240
50/1
9.1
Depth
Environmentally
Responsible
Depth
Assembled in the USA
Dealer
HeightCompressor
DUAL-BLOWER 30,000 BTU/HR MODEL
Width
SINGLE-BLOWER 18,000 & 27,000 BTU/HR MODELS
Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 ‘SQUF’ models indicate Q-Logic control. For SMXII control use ‘SXUF’. For electro-mechanical controls use ‘SHUF’.
2 BTU and electrical data are based on a 45°F/7.2°C evaporator and 100°F/37.8°C condenser in cool mode, and a 45°F/7.2°C evaporator and 130°F/54.4°C condenser in heat mode.
3 60Hz units must not operate at 50Hz and 50Hz units must not operate at 60Hz unless data plate states otherwise.
Model (1)
Capacity (BTU/h) (2)
Voltage (V)
Cycle (Hz) (3) /Phase (Ph)
Full Load Amps (FLA) Cool (A)
Full Load Amps (FLA) Heat (A)
Full Load Amps (FLA) Blower (A)
Locked Rotor Amps (LRA) (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Refrigerant Type
Height-Coil (in/mm)
Height-Compressor (in/mm)
Width (in/mm)
Depth (in/mm)
Min. Supply Duct Size (in/mm)
Min. Supply Air Grille Size (sq in/sq cm)
Min. Return Air Grille Size (sq in/sq cm)
Seawater Inlet Connection (in/mm)
Specifications for Stowaway Compact Series Boat Air Conditioning
Width
HeightCoil
14
SELF-CONTAINED AIR CONDITIONING
1
SPLIT-GAS AIR CONDITIONING
R
e
re
G
A s
10 a
-4 G
Emerald Series (6K-16K) Condensers
Innovative Chassis Conquers Installation Challenges
Key Benefits
After listening to boat builders, global service teams and boat owners, Dometic engineers designed
the innovative Emerald Condenser series to harness and maximize the impressive performance of
R-410A refrigerant while meeting all international clean air standards.
The increase in BTU capacity is due primarily to the improved refrigerant metering design. The biflow thermal expansion valve for cooling provides up to a 14% increase in system capacity, which,
when combined with a separate metering system for heating, attains an increase of up to 10% in
heating performance. The amperage reduction of up to 27% is due to the more efficient design of
the rotary compressor and properly sized refrigerant components.
The compact design of the Emerald series incorporates built-in vibration-isolating mounts, two
large drain connections and numerous mounting options for installation to a smooth deck, stringer
or existing rack. The incorporated lifting handles and smooth bottom allows for easy lifting and
quick placement of the unit. The molded composite no-rust drain pan is shaped to provide positive
drainage even when the boat heaves and rolls. The amount of standing water in the drain pan is
reduced by up to 85%, which is 8x times less than a typical drain pan.
Emerald condensers can be installed quickly and easily. The drain, seawater and refrigerant
connections are conveniently located to conquer installation challenges thus reducing installation
time by up to fifteen minutes. The electrical box can be easily removed and located up to 5 ft.
(1.5 m) away, further reducing the size of the unit while making the system more accessible. The
reversing valve, pressure switches and service ports are centrally located, high on the unit for
access from any side.
The reversing valve, pressure
switches, and service ports
are centrally located for easy
maintenance access from
any side.
ISO 9001:2008
Vibration-isolating
compressor mounting system
reduces noise and vibration.
L-2702A
Rev. 20120803
■■
Up to 17.5% increase in BTU capacity
■■
Up to 41% amperage reduction
■■
Up to 32% reduced start-up amps
■■
Up to 16% smaller
■■
Up to 25% lighter
■■
Up to 85% reduction in standing water in
the drain pan
■■
Up to 15 minutes faster to install
■■
Square chassis for easy installation in
tight spaces
■■
Three mounting options adapt to
installation environments
■■
Rust-free composite drain pan
■■
Reconfigurable chassis allows optimal
drain connections
■■
Compressor vibration-isolation mounts
minimize noise and vibration
■■
Built-in refrigerant line filter drier
reduces installation time and protects
the compressor from moisture and
contaminants
■■
Reversing valve, pressure switches, and
service ports centrally located for easy
maintenance access from any side
■■
Engineered to maximize the performance
of R-410A, an environmentally safe
refrigerant
3/8
42.05/19.1 43/19.6
49.5/22.5 50/22.7
8.75/223
6.5/166
2.63/67
3/8
43/19.6
50/22.7
8.75/223
6.5/166
2.63/67
3/8
1/4
1/4
1/4
2.6
3.6
22
15
9
230
45/20.5
52/23.6
8.75/223
6.5/166
2.63/67
240
50/1
2.8
3.8
21
10
8
3/8
1/4
15.1/384
5/8 /16
cupranickle tube
13.3/338
E*12
12000
115
230
60/1
7.6
3.4
9.8
4.5
58
28
30
15
18
10
410A
3/11.4
13/331
13.3/338
44.25/20.1 45/20.5 47/21.4
50.5/22.1 52/23.6 54/24.5
8.75/223
6.5/166
2.63/67
15.1/384
5/8 /16
cupranickle tube
15.1/384
5/8 /16
cupranickle tube
13.3/338
15.1/384
5/8 /16
cupranickle tube
240
50/1
E*10
10000
115
60/1
5.6
7.7
42
25
15
410A
2.5/9.5
13/331
13.3/338
13.3/338
6
240
50/1
2.4
3.3
17.7
E*8
8000
115
230
60/1
4.2
2.4
5.8
3.3
36
17.7
15
10
11
6
410A
2/7.6
12/305
13.3/338
13.3/338
E*6
6000
115
230
60/1
3.8
1.8
5.1
2.44
36
17.5
15
10
11
7
410A
1.5/5.7
12/305
13.3/338
240
50/1
2.79
3.81
21
10
8
4.3
5.8
34
15
11
230
10
240
50/1
3.9
5.3
22
49/22.3 50.5/22.1 50/22.7
56/25.5 57/25.9 56/25.5
8.75/223
6.5/166
2.63/67
1/2
1/4
15.1/384
5/8 /16
cupranickle tube
13.3/338
E*16
16000
115
60/1
8.8
12
62
40
23
410A
4/15.2
14.1/359
13.3/338
L-2702A
Rev. 20120803
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 Cruisair customers, replace ‘*’ in the model name with ‘Q’ for Q-Logic digital control system, or ‘M’ for electro-mechanical control. Marine Air customers, replace ‘*’ in the model name with ‘D’ for Passport I/O digital control
system, or ‘M’ for electro-mechanical control.
2 BTU and electrical data are based on a 45°F/7.2°C evaporator and 100°F/37.8°C condenser in cool mode, and a 45°F/7.2°C evaporator and 130°F/54.4°C condenser in heat mode.
3 60Hz units must not operate at 50Hz and 50Hz units must not operate at 60Hz unless data plate says otherwise.
4 All weights ± 10%
5 All dimensions ± 10 mm
Model (1)
Capacity (BTU/h) (2)
Voltage (V)
Cycle (Hz) (3) /Phase (Ph)
Full Load Amps (FLA) Cool (A)
Full Load Amps (FLA) Heat (A)
Locked Rotor Amps (LRA) (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Refrigerant Type
Water Flow (gpm/lpm)
Max. Height (in/mm) (4)
Width (in/mm) (5)
Depth-Without Elec. Box (in/
mm) (5)
Depth-With Elec. Box (in/mm) (5)
Seawater Inlet Connection (in/mm)
Seawater Connection Type
Refrigerant Line ConnectionDischarge (in)
Refrigerant Line ConnectionSuction (in)
Net Weight (lbs/kg) (4)
Gross Weight (lbs/kg) (4)
Height-Electrical Box (in/mm)
Width-Electrical Box (in/mm)
Depth-Electrical Box (in/mm)
Specifications for Emerald Series (6K-16K) Condensers
Environmentally
Responsible
Assembled in the USA
11.15 in.
(283 mm)
Top View of Drain Pan To Show
Mounting Hole Locations
Depth. With Elec. Box
Depth-Without Elec. Box
Dimensions
Dealer
11.15 in.
(283 mm)
Height
Width
16
SPLIT-GAS AIR CONDITIONING
1
SPLIT-GAS AIR CONDITIONING
R
e
re
G
A s
10 a
-4 G
Emerald Series (24K-72K) Condensers
Innovative Chassis Conquers Installation Challenges
Key Benefits
■■
Up to 85% reduction in standing water in
the drain pan
■■
Up to 15 minutes faster to install
■■
Square chassis for easy installation in
tight spaces
■■
Three mounting options adapt to
installation environments
■■
Rust-free composite drain pan
■■
Reconfigurable chassis allows optimal
drain connections
■■
Compressor vibration-isolation mounts
minimize noise and vibration
■■
Built-in refrigerant line filter drier
reduces installation time and protects
the compressor from moisture and
contaminants
■■
Reversing valve, pressure switches, and
service ports centrally located for easy
maintenance access from any side
■■
Engineered to maximize the performance
of R-410A, an environmentally safe
refrigerant
After listening to boat builders, global service teams and boat owners, Dometic engineers designed
the innovative Emerald Condenser series to harness and maximize the impressive performance of
R-410A refrigerant while meeting all international clean air standards.
The compact design of the Emerald series incorporates built-in vibration-isolating mounts, two
large drain connections and numerous mounting options for installation to a smooth deck, stringer
or existing rack. The incorporated lifting handles and smooth bottom allows for easy lifting and
quick placement of the unit.The molded composite no-rust drain pan is shaped to provide positive
drainage even when the boat heaves and rolls. The amount of standing water in the drain pan is
reduced by up to 85%, which is 8x times less than a typical drain pan.
Emerald condensers can be installed quickly and easily. The drain, seawater and refrigerant
connections are conveniently located to conquer installation challenges thus reducing installation
time by up to fifteen minutes. The electrical box can be easily removed and located up to 5 ft.
(1.5 m) away, further reducing the size of the unit while making the system more accessible. The
reversing valve, pressure switches and service ports are centrally located, high on the unit for
access from any side.
The reversing valve, pressure
switches, and service ports
are centrally located for easy
maintenance access from
any side.
ISO 9001:2008
Vibration-isolating
compressor mounting system
reduces noise and vibration.
L-2702B
Rev. 20120803
E*24
24000
230
240
60/1
50/1
6.3
6.4
7.8
8
43
46
30
17
18
410A
18/458
16/407
16/407
18.8/478
5/8 /16
cupranickle tube
3/8
5/8
98.5/44.7
104/47.2
129/58.6
133/60.4
13.25/337
7.75/197
3.75/96
380
50/3
2.7
3.6
28
15
10
87/39.5
100/45.4
117.55/53.4 132/59.9
230
60/3
4.5
6.2
55.4
20
14
E*30
30000
230
240
60/1
50/1
7.3
7.9
9.2
9.9
54
67
35
40
22
23
410A
18/458
16/407
16/407
18.8/478
5/8 /16
cupranickle tube
3/8
3/4
102.25/46.4
133.5/60.6
13.25/337
7.75/197
3.75/96
E*36
36000
230
240
60/1
50/1
9.1
9.4
11.5
12
74
67
45
40
26
25
410A
18/458
16/407
16/407
18.8/478
5/8 /16
cupranickle tube
3/8
3/4
114.5/51.1 118/53.6
147/66.7
149.5/67.9
13.25/337
7.75/197
3.75/96
102/46.3
130/58.1
230
60/3
6.3
8.3
71
35
20
116/52.7
148/67.2
3.3
4.2
38
15
10
460
380
50/3
4.44
5.88
45
20
13
Height
Width
13.94 in.
(354 mm)
Top View of Drain Pan To Show
Mounting Hole Locations
13.94 in.
(354 mm)
L-2702B
Rev. 20120803
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
Depth-With Elec. Box
Depth-Without Elec. Box
Dimensions
Environmentally
Responsible
Assembled in the USA
230
60/3
8.23
10.89
95
49
28
Dealer
E*48
48000
230
240
60/1
50/1
11.9
12.08
15.8
17.95
105
115
75
70
43
41
410A
18.5/470
16/407
16/407
18.8/478
5/8 /16
cupranickle tube
3/8
3/4
122/55.4
135/61.3
153/69.4
150/68.1
13.25/337
7.75/197
3.75/96
1 Cruisair customers, replace ‘*’ in the model name with ‘Q’ for Q-Logic digital control system, or ‘M’ for electro-mechanical control. Marine Air customers, replace ‘*’ in the model name with ‘D’ for Passport I/O digital control system, or ‘M’ for electro-mechanical control.
2 BTU and electrical data are based on a 45°F/7.2°C evaporator and 100°F/37.8°C condenser in cool mode, and a 45°F/7.2°C evaporator and 130°F/54.4°C condenser in heat mode.
3 60Hz units must not operate at 50Hz and 50Hz units must not operate at 60Hz unless data plate says otherwise.
4 All dimensions ± 0.30 in. (8 mm).
5 All weights ± 10%
Model (1)
Capacity (BTU/h) (2)
Voltage (V)
Cycle (Hz) (3) /Phase (Ph)
Full Load Amps (FLA) Cool (A)
Full Load Amps (FLA) Heat (A)
Locked Rotor Amps (LRA) (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Refrigerant Type
Max. Height (in/mm) (4)
Width (in/mm) (4)
Depth-Without Elec. Box (in/mm) (4)
Depth-With Elec. Box (in/mm) (4)
Seawater Inlet Connection (in/mm)
Seawater Connection Type
Refrigerant Line Connection-Discharge (in)
Refrigerant Line Connection-Suction (in)
Net Weight (lbs/kg) (5)
Gross Weight (lbs/kg) (5)
Height-Electrical Box (in/mm)
Width-Electrical Box (in/mm)
Depth-Electrical Box (in/mm)
Specifications for Emerald Series (24K-72K) Condensers
5.95
7.42
70
30
19
460
17
380
50/3
5.29
6.6
60
E*60
60000
230
60/1
60/3
13.56
10.18
20.15
12.7
150
120
80
55
48
33
410A
20/508
16/407
16/407
18.8/478
5/8 /16
cupranickle tube
3/8
3/4
155/70.4
170/77.2
13.25/337
7.75/197
3.75/96
5.25
6.6
60
30
17
460
18
SPLIT-GAS AIR CONDITIONING
1
SPLIT-GAS AIR CONDITIONING
EW
N
Emerald TurboVap Series Evaporators
Reduced Size, Noise & Power Draw
Key Benefits
The Emerald TurboVap series of split-gas evaporators for boats incorporates revolutionary
design features with mechanical engineering that maximizes the effectiveness of R-410A, an
environmentally safe refrigerant.
Emerald TurboVaps are easy to install. For ideal positioning, the high-velocity blower can rotate
up to 270 degrees with a single adjustment screw. The enclosed motor means no blower-motor
overhang for a compact design.
Since evaporators are usually positioned in or near cabins, noise is always a concern. The Emerald
TurboVap uses a vibration-isolation mounting system to minimize noise, so the evaporator runs
more quietly. The fully insulated, high-velocity blowers are quiet and efficient.
Excellent condensate drainage is achieved with a unique positive-flow, anti-slosh, composite
drain pan that is rust-free. Condensate water is rapidly removed at one of two easy-to-plumb drain
locations.
The Emerald TurboVap Series was designed to operate as a system with the Emerald Condenser
Series. Both of these split-system components were engineered to harness and maximize the
superior thermodynamic properties of the environmentally safe R-410A refrigerant.
The Emerald TurboVap is available in six capacities ranging from 4,000 to 16,000 BTU/hr.
The rust-free composite
drain pan reduces standing
water up to 85%, thanks
to "positive-flow" drain
channels. These channels
also help prevent spilling and
sloshing in rough seas.
ISO 9001:2008
Optional lineset extentions
for discharge and suction are
available for all TurboVap
models.
L-2695B
Rev. 20120803
■■
Up to 28% reduced amperage
■■
Up to 85% reduction in standing water in
the drain pan
■■
Up to 14% increase in cooling capacity
■■
Up to 15% lighter
■■
Up to 17% reduction in height
■■
Up to 19% increased air flow CFM
■■
Rust-free composite drain pan
■■
Drain pan features anti-slosh, "positiveflow" drain channels for no spills and
rapid removal of condensate
■■
Up to 15 minutes faster to install
■■
Single adjustment screw for 270° of
blower rotation
■■
High-velocity (HV) fully-insulated blowers
are rotatable
■■
Vibration-isolation mounts reduce noise
and vibration
■■
115V and 230V models
■■
Designed to be used with Emerald Series
(R-410A) condensers
TVE4
4000
115
0.82
5
2
10.8/275
10.8/275
12.3/313
9.5/242
4/102
32/207
64/413
10.5/4.8
18.5/8.4
11.25/5.2
18/8.2
1
230
0.41
TVE6
6000
115
0.82
5
2
10.8/275
10.8/275
12.3/313
9.5/242
4/102
32/207
64/413
12/5.5
19/8.7
12.25/5.6
20.25/9.2
1
230
0.41
TVE8
8000
115
230
1.56
0.83
5
2
10.8/275
11.4/290
12.3/313
9.4/239
5/127
48/310
80/517
14/6.4
22/9.1
TVE10
10000
115
1.14
5
2
12.6/321
12.6/321
14.3/364
10.4/265
6/153
60/388
110/710
17.5/7.1
25.5/11.6
25/11.4
1
230
0.61
TVE12
12000
115
1.14
5
2
12.6/321
12.6/321
14.3/364
10.4/265
6/153
70/452
130/839
17.5/7.1
25.5/11.6
L-2695B
Rev. 20120803
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
TVE16
16000
230
115
0.61
1.61
5
1
3
13/331
13.6/346
14.3/364
11.6/295
7/178
81/523
160/1033
17.75/8.1 20.5/9.3
24.75/11.3 28.5/12.1
21/9.6
1
230
0.78
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 Add ‘115V’ or ‘230V’ to the model number for 115V and 230V units, respectively.
2 All dimensions ± 0.30 in. (8 mm).
3 All weights ± 10%
Model (1)
Capacity (BTU/h)
Voltage @ 50/60Hz 1-Ph (V)
Full Load Amps (FLA) Cool (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Height-Coil (in/mm) (2)
Height-Blower (in/mm) (2)
Width (in/mm) (2)
Depth (in/mm) (2)
Min. Supply Duct Size (in/mm)
Min. Supply Air Grille Size (sq in/sq cm)
Min. Return Air Grille Size (sq in/sq cm)
Net Weight (lbs/kg) (3)
Gross Weight (lbs/kg) (3)
Specifications for Emerald TurboVap Series Evaporators
Environmentally
Responsible
Depth
HeightBlower
Assembled in the USA
Dimensions
Dealer
Width
HeightCoil
20
SPLIT-GAS AIR CONDITIONING
2
SPLIT-GAS AIR CONDITIONING
R
e
re
G
A s
10 a
-4 G
EBE Series R-410A Evaporators
The New Standard In Marine High-Performance Evaporators
Key Benefits
Compact EBE split evaporators for boats are draw-through, ductable cooling units with reversecycle heating. Featuring a rotatable, high-efficiency permanent split capacitor (PSC) blower in
which the motor is concealed, EBE series evaporators are available in capacities from 6K to 36K
BTU/hr. EHBE units have electric heat.
The EBE Series was designed for installation low in a closet, cabinet, or other enclosed space,
with discharge air ducted to one or more grilles high in the cabin. EBE units can be used with a
combination of plenums and flexible duct, or built-in ductwork may be used. If you are using built-in
ductwork, a flexible transition between the blower and duct should be installed.
Vibration-isolation mounting is built into each EBE unit to reduce noise and vibration. The PSC
blower is supported by a sturdy aluminum bracket with isolation grommets to reduce possible
vibration. The blower’s internal motor housing reduces the overall unit depth for easier installation
and promotes quieter operation.
The drain pan and blower housing are covered with insulating foam which reduces noise and
secondary condensation.
The “positive flow” drain pan has an anti-slosh, antifungal foam lining. Two 1/2 in. (13 mm) drains
are located on the blower side of the drain pan.
ISO 9001:2008
L-2854
Rev. 20120803
■■
Compact ductable cooling or heating
units
■■
High-velocity (HV) fully-insulated blowers
are rotatable
■■
Insulated condensate pan with anti-slosh,
anti-fungal foam lining
■■
Available with electric heat (EHBE
models)
■■
High-efficiency evaporator coil
■■
Larger blower inlet for increased air flow
across the coil
■■
Blower support bracket with cushioned
mounts to reduce noise and vibration
■■
Increased metal thickness on structural
parts for added strength
■■
Thermal expansion valve for optimal
performance over a range of conditions
■■
Designed to be used with Emerald Series
(R-410A) condensers
EBE18
18000
230
1.15
N/A
1.15
5
2
N/A
N/A
540/918
13.63/347
15.13/385
16/407
14/356
27/12.3
35/15.9
EBE24
24000
230
1.64
N/A
1.64
5
3
N/A
N/A
800/1360
16.5/420
17/432
20/508
14.5/369
37.65/17.1
49.5/22.5
EBE30
30000
230
1.64
N/A
4
5
3
N/A
N/A
1000/1700
20.5/521
22/559
20.75/528
15/381
36/16.4
42/19.1
EBE36
36000
230
4
N/A
4
5
5
N/A
N/A
1200/2039
20.5/521
22.25/566
20.75/528
17.75/451
41.75/18.1
56.5/25.7
EHBE8
8000
230
0.98
5.4
0.98
10
6
1/1.4
4.35
266/452
11.25/286
12.5/318
13.75/350
12/305
21/9.6
29/13.2
EHBE10
10000
230
0.66
7.2
0.66
10
8
1.5/2.1
6.52
333/566
12.5/318
13.5/343
14.25/362
13.75/350
23/10.5
31/14.1
EHBE12
12000
230
0.56
9.26
0.56
10
10
2/2.7
8.7
400/680
12.5/318
13.5/343
14.25/362
14.5/369
23/10.5
31.5/14.3
EHBE16
16000
230
0.88
9.58
1.15
10
10
2/2.7
8.7
533/906
13.5/343
15.5/394
16/407
14.75/375
28/12.8
36/16.4
EHBE24
24000
230
1.64
14.68
1.64
20
16
3/4.1
13.04
800/1360
16.5/420
17/432
20/508
15/381
44.75/20.3
56.25/25.6
L-2854
Rev. 20120803
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
HeightCoil
Environmentally
Responsible
Depth
Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 ‘EBE’ indicates evaporator without electric heat; ‘EBHE’ indicates evaporator with electric heat. Dometic Marine also offers an EBHE6-1KW and EBHE16-3KW. For more information please contact a sales
representative at 954-973-2477.
2 All dimensions ± 0.30 in. (8 mm).
3 All weights ± 10%
Model (1)
Capacity (BTU/h)
Voltage @ 50/60Hz 1-Ph (V)
Full Load Amps (FLA) Cool (A)
Full Load Amps (FLA) Heat (A)
Full Load Amps (FLA) Blower (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Electric heat (kW/hp)
Heater Amps (A)
Air Flow (cfm/m3h)
Height-Coil (in/mm) (2)
Height-Blower (in/mm) (2)
Width (in/mm) (2)
Depth (in/mm) (2)
Net Weight (lbs/kg) (3)
Gross Weight (lbs/kg) (3)
Specifications for EBE Series R-410A Evaporators
Assembled in the USA
HeightBlower
Dealer
Width
22
SPLIT-GAS AIR CONDITIONING
2
SPLIT-GAS AIR CONDITIONING
ith
W 0A
ow 1
N R- 4
EBLE Series Low-Profile Evaporators
Dual-Blower Units for Height Restrictive Spaces
Key Benefits
Cruisair’s EBLE low profile, dual-blower series of ductable cooling/heating units are available in
a wide range of capacities and configurations. Available in capacities from 12K to 36K BTU/hr.,
EBLE units are designed for installations where there is limited vertical space, such as beneath a
seat or bunk, or in overhead spaces.
Standard EBLE units consist of a low-profile evaporator coil mounted on a deep condensate
pan, with two high-efficiency permanent split capacitor (PSC) blowers drawing air across the coil.
Refrigerant line connections and a metering device are also included. Refrigerant connections are
male flare fittings.
The variable-speed blower motor is internal to the blower wheel, which results in less noise and
reduced unit depth for easier installation.
The drain pan, blower housing and all transitional metal surfaces are covered with insulating
foam to prevent secondary condensation and reduce noise. The drain pan is lined with anti-slosh,
antifungal foam, and the blowers can be rotated for discharge in different directions.
EBLEP models are designed for overhead installations, and include an insulated return-air plenum
to collect air from a ceiling mounted grille.
EHBLE units have integrated electric heat strips to provide heat when the seawater is too cold for
adequate reverse-cycle heating. All Cruisair auxiliary heaters use a two-stage thermal protection
system to prevent dangerous overheating in case airflow is lost. The first cutout is an automatic
reset switch, and the second stage is a manual reset control. Other safety features include hightemperature insulation on the interior surfaces and high temperature wiring.
Units are available with
return-air plenum for
overhead applications
(EBLEP models).
ISO 9001:2008
L-0717
Rev. 20130531
■■
Low-profile, dual-blower ductable cooling/
heating units
■■
Environmentally safe R-410A refrigerant
■■
Variable-speed, high-efficiency PSC
blowers are rotatable
■■
Drain pan has anti-slosh, anti-fungal foam
lining
■■
Exposed sheet metal is insulated against
secondary condensation
■■
Available with electric heat (EHBLE
models)
■■
Units are available with return-air plenum
for overhead applications (EBLEP
models).
■■
Models with return-air plenum also
available with electric heat (EHBLEP
models)
■■
Thermal expansion valve for optimal
performance over a range of conditions
EBLE12
12000
115
1.64
5
3
N/A
N/A
11.25/286
24/610
13.5/343
6/153
70/452
130/839
1/4
3/8
2
230
0.74
EBLE16
16000
115
2.4
5
4
N/A
N/A
11.25/286
24/610
13.5/343
7/178
80/517
160/1033
3/8
1/2
2
230
1.2
EHBLE16
16000
115
3.2
25
22
2/2.7
17.4
11.25/286
20.5/521
16/407
7/178
80/517
160/1033
3/8
1/2
8.7
230
1.44
15
11
EBLEP16
16000
115
3.12
5
4
N/A
N/A
11.25/286
24/610
13.5/343
7/178
80/517
160/1033
1/4
1/2
3/8
24.25/616
21/534
2
230
1.2
HeightCoil
Depth-With Plenum
Depth
Return Air Plenum
(EBLEP and EBHLEP Units Only)
L-0717
Rev. 20130531
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
EHBLEP16
16000
115
3.12
25
22
2/2.7
17.4
11.25/286
24.25/616
23.75/604
7/178
80/517
160/1033
3/8
1/2
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
Width
Dimensions
1 EBLE indicates base unit without electric heat or return-air plenum; EHBLE indicates unit with electric heat, but without return-air plenum; EHBLEP indicates unit with electric heat and return-air plenum.
2 Height values shown are from the mounting surface to the top of the coil with blowers in the horizontal position.
Model (1)
Capacity (BTU/h)
Voltage @ 50/60Hz 1-Ph (V)
Full Load Amps (FLA) Blower (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Electric heat (kW/hp)
Heater Amps (A)
Height (in/mm) (2)
Width (in/mm)
Depth (in/mm)
Min. Supply Duct Size (in/mm)
Min. Supply Air Grille Size (sq in/sq cm)
Min. Return Air Grille Size (sq in/sq cm)
Refrigerant Line Connection-Discharge (in)
Refrigerant Line Connection-Suction (in)
Specifications for EBLE Series Low-Profile Evaporators
Environmentally
Responsible
8.7
230
1.44
15
11
EHBLE24
24000
230
1.76
20
16
2/2.7
8.7
12.5/318
27.5/699
17/432
8/204
140/904
240/1549
3/8
5/8
Assembled in the USA
EBLE24
24000
230
2.8
5
3
N/A
N/A
12.5/318
27.5/699
14/356
8/204
140/904
240/1549
3/8
5/8
Dealer
EBLEP24
24000
230
2.8
5
3
N/A
N/A
12.5/318
27.75/705
N/A
8/204
140/904
240/1549
3/8
5/8
EHBLEP24
24000
230
1.76
15
11
2/2.7
8.7
12.5/318
22.75/578
26.5/674
8/204
140/904
240/1549
3/8
5/8
EBLE30
30000
230
3.6
5
3
N/A
N/A
13/331
37.5/953
14/356
9/229
170/1097
350/2259
3/8
3/4
EBLEP30
30000
230
2.3
5
3
N/A
N/A
13/331
37.5/953
N/A
9/229
170/1097
350/2259
3/8
3/4
EBLE36
36000
230
3.6
5
3
N/A
N/A
13/331
37.5/953
14/356
10/254
196/1265
360/2323
3/8
3/4
EBLEP36
36000
230
3.6
5
3
N/A
N/A
13/331
37.5/953
N/A
10/254
196/1265
360/2323
3/8
3/4
24
SPLIT-GAS AIR CONDITIONING
2
SPLIT-GAS AIR CONDITIONING
EBDE Series High-Capacity Evaporators
Multi-Ton Units for Split-Gas Air Conditioning Systems
Key Benefits
EBDE evaporators are draw-through, ductable cooling and heating units with variable speed
blower and enclosed in an insulated aluminum housing with integrated condensate drain pan.
EBDE units are designed to be installed in a cabinet or other enclosed space with discharge air
ducted to grilles high in the cabin.
EBDE models are available in capacities from 30,000 to 72,000 BTU/hr, and can be used with
Emerald series reverse-cycle condensing units.
The 30,000 and 36,000 BTU/hr units have one evaporator coil with a single return air inlet. The
48,000 to 72,000 BTU/hr units feature a dual return air inlet design with two evaporator coils.
Return air filters are also included.
Vertical or horizontal air discharge is specified when ordering the unit (by the model designation).
The deep condensate drain pan is filled with anti-slosh, anti-fungal foam and has two drain fittings.
The drain pan also includes rubber vibration-isolation mounting feet.
EBDE evaporators can be ducted with flexible or built-in ducts to deliver air to one or more cabins.
The maximum external static pressure is 0.25 in. water. A hose adapter will be needed to connect
the unit to flexible duct. If using built-in ducting, a flexible transition should be installed between the
unit and the duct. Return air should not be ducted.
EBDE models can be used with Cruisair microprocessor or mechanical cabin controls.
Vibration-isolation mounts
reduce noise and vibration.
ISO 9001:2008
L-0980
Rev. 20140117
■■
Variable-speed blower
■■
Horizontal or vertical air discharge
■■
Integrated condensate drain pan with
anti-slosh, anti-fungal foam lining
■■
Internal components are insulated against
secondary condensation
■■
230V/60Hz models (50Hz available)
■■
Easy-to-replace air filter
■■
Capacities from 30,000 to 72,000 BTU/hr
■■
Works with Emerald series condensers
■■
Integrated chassis with vibration isolation
mounts to reduce noise and vibration
EBDE30
30000
230
60/1
1.64
5
3
800/1360
20.5/521
24.5/623
19.75/502
13.5
22.8
10/254
150/968
280/1807
3/8
3/4
EBDE36
36000
230
60/1
3.8
5
5
1200/2039
20.5/521
24.5/623
19.75/502
13.5
22.8
10/254
170/1097
320/2065
3/8
3/4
220
50/1
5.8
10
8
EBDE48
48000
230
60/1
4.3
10
6
1600/2719
20.5/521
24.5/623
25.5/648
18.56
22.8
12/305
230/1484
440/2839
3/8
3/4
8
220
50/1
5.8
EBDE60
60000
220
50/1
4
5
5
2000/3399
20.5/521
24.5/623
25.5/648
18.56
22.8
12/305
290/1871
570/3678
3/8
3/4
EBDE72
72000
220
50/1
4
5
5
2400/4078
20.5/521
24.5/623
25.5/648
18.56
22.8
14/356
350/2259
690/4452
3/8
3/4
L-0980
Rev. 20140117
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Environmentally
Responsible
Width
Return Air
(On both sides for 48K-72K units)
Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 For horizontal air discharge add ‘HC’ to the end of the model number; for vertical air discharge add ‘VC’. For example, EBDE30-HC indicates a 30,000 BTU/hr. unit in the horizontal discharge configuration.
2 50Hz models are available by special order.
3 All dimensions ± 0.30 in. (8 mm).
Model (1)
Capacity (BTU/h)
Voltage (V) (2)
Phase (Hz)/Cycle (Ph)
Full Load Amps (FLA) Blower (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Air Flow (cfm/m3h)
Height (in/mm) (3)
Width (in/mm) (3)
Depth (in/mm) (3)
Mount-Depth (in)
Mount-Width (in)
Min. Supply Duct Size (in/mm)
Min. Supply Air Grille Size (sq in/sq cm)
Min. Return Air Grille Size (sq in/sq cm)
Refrigerant Line Connection-Discharge (in)
Refrigerant Line Connection-Suction (in)
Specifications for EBDE Series High-Capacity Evaporators
Assembled in the USA
Height
Dealer
Depth
Horizontal Air Discharge
Electrical
Connections
Refrigerant
Connections
Mount-Width
Evaporator Coil (All Units)
Vertical Air Discharge
Evaporator Coil (48-72K Only)
TOP VIEW TO SHOW
MOUNTING LOCATIONS
MountDepth
26
SPLIT-GAS AIR CONDITIONING
2
SPLIT-GAS AIR CONDITIONING
R Series (5K-16K) Condensing Units
Seawater-Cooled Condensers With Reverse-Cycle Heating
Key Benefits
R Type remote condensing units are the next generation of seawater-cooled, reverse-cycle
heat pumps for cooling and heating in marine applications. Small R Type units are available in
capacities from 5,000 to 16,000 BTU/hr.
These condensing units can be installed with up to two Cruisair cooling units, where the total
capacity is equal to the condensing unit capacity. In the cooling mode, full performance is available
in seawater up to 90°F (32°C). In reverse-cycle heating, they will provide heat in seawater as low
as 40°F (4.4°C).
R Type condensers have a number of improvements over the original “F” type condensing units. A
one-piece chassis/pan has a smaller footprint, with two 1/2 in. FPT drain connections. New holddown brackets secure all four corners and allow for easier installation and removal. The one-piece
electrical box with 3 ft. (0.9 m) cable can be remotely mounted. (RN models have a secondary
box). Additional service ports have been added for ease of charging and servicing. The R type unit
is designed as a drop-in for the older F and J type with few modifications.
Type R models are designed for installation in the vessel’s engine room or other mechanical
space. It is not affected by moisture, normal vibration, or ambient temperatures up to 140°F (60°C).
No ventilation is required.
Three different models are available, depending on what type of control is desired. “R” use the SA3
3-knob rotary switch assembly, “RX” is controlled by the SMX II microprocessor, and “RN” uses the
SMX Net. SMX models include the respective SMX II or SMX Net power/logic boards. In addition,
an SMXir or the new SMXht keypad/ display, a CXP connecting cable, and a TSEP temperature
sensor must be purchased separately. If networking RN units, CNP network cables are also
needed.
A seawater cooling system, with pump, scoop type through-hull, seacock, strainer, and overboard
discharge, is also required.
ISO 9001:2008
L-2431
Rev. 20130111
■■
Service ports on refrigerant lines and
base valves
■■
Compressor vibration-isolation mounts
minimize noise and vibration
■■
Condensate drain pan with front and rear
drain stems
■■
Corner mounting brackets for easier
installation
■■
High-pressure switch (SMX control
models also include low-pressure switch)
■■
Electrical box can be mounted remotely
■■
Environmentally safe R-417A refrigerant
■■
Ignition protected
■■
Additional vibration isolation kit available
■■
Charged, tested, and leak checked at the
factory
3/8 /10
4.84/123
4.84/123
3/8 /10
3/8 /10
1/4 /7
4.84/123
1/4 /7
1/4 /7
5/8 /16
13.6/346
8.2
47
30
18
R417A
12.5/318
12.2/310
17.1/435
7.56/193
5/8 /16
5/8 /16
3.7
16
6.1
11.12/283
13.6/346
13.6/346
4
20
10
7
3
7.56/193
7.7
34
20
13
R417A
12.5/318
12.2/310
17.1/435
6.2
28
28
7
R417A
12.5/318
12.2/310
17.1/435
3.3
240
50/1
7.56/193
7
5
230
R*10
10000
115
60/1
11.12/283 11.12/283
R*7
7000
115
60/1
R*5
5000
115
60/1
5.7
28
15
11
4.8
230
5.6
26
4.6
240
50/1
4.84/123
7.56/193
11.12/283
3/8 /10
1/4 /7
5/8 /16
13.6/346
9.1
50
35
21
R417A
12.5/318
12.2/310
17.1/435
7.9
R*12
12000
115
60/1
6.8
34
20
13
5.9
230
5.8
31
10
9
5.2
240
50/1
4.84/123
7.56/193
11.12/283
1/2 /13
1/4 /7
5/8 /16
13.6/346
13.5
75
40
25
R417A
12.5/318
12.2/310
17.1/435
11.5
R*16
16000
115
60/1
6.4
36
15
11
5.4
230
8
35
20
13
6.8
240
50/1
L-2431
Rev. 20130111
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Max. Height
Environmentally
Responsible
Width
Assembled in the USA
Electrical
Box
Dealer
3.5 in.
89 mm
Depth-With Elec. Box
Depth-Without
Elec. Box
Add 3.5 in. (89 mm) to depth for additional electrical box
required for SMX Net control (‘RN’ models)
Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 ‘*’ is the designator for type of control. For mechanical controls, replace ‘*’ with ‘M’. For SMX Net replace with ‘N’, indicate ‘X’ for SMX II and use ‘Q’ for Q-Logic.
2 For a specific voltage, add the following after the capacity designator: ‘C’ for 230V/60Hz/1-Phase, ‘CK’ for 220-240/50Hz/1-Phase, ‘D’ for 230V/60Hz/3-Phase, ‘E’ for 460V/60Hz/3-Phase, and ‘ECK’ for
380V/50Hz/3-Phase. Adding nothing will indicate 115V/60Hz/1-Phase (not available for multi-ton models).
3 115V, 230V, and 440V 60Hz equipment can be operated at 100V, 200V, or 380V, respectively, in a 50Hz environment but at a 17% decrease in capacity. Full-rated capacity can be obtained by specifying
Cruisair “CK” (220V/50Hz) equipment.
4 Compressor starting current will vary with voltage but is approximately 3 to 4 times the full-load amps.
5 Width shown is for electrical box with Q-Logic control system (RQ models). Width of electrical box with SMX II control (RX models) is 7.53 in. (192 mm), and with SMX Net control (RN models) the width is
7.69 in. (196 mm).
6 Depth shown is for electrical box with Q-Logic control system (RQ models). Depth of electrical box with SMX II control (RX models) is 4.72 in. (120 mm), and with SMX Net control (RN models) the depth
is 7.81 in. (199 mm).
Model (1)(2)
Capacity (BTU/h)
Voltage (V) (3)
Cycle (Hz)/Phase (Ph)
Full Load Amps (FLA) Cool
(A) (4)
Full Load Amps (FLA) Heat (A)
Locked Rotor Amps (LRA) (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Refrigerant Type
Max. Height (in/mm)
Width (in/mm)
Depth-With Elec. Box (in/mm)
Depth-Without Elec. Box
(in/mm)
Seawater Inlet Connection
(in/mm)
Refrigerant Line ConnectionDischarge (in/mm)
Refrigerant Line ConnectionSuction (in/mm)
Height-Electrical Box (in/mm)
Width-Electrical Box (in/
mm) (5)
Depth-Electrical Box (in/
mm) (6)
Specifications for R Series (5K-16K) Condensing Units
0.75 in.
(19 mm)
Ø 0.4 in.
(10 mm)
Corner Mounting Bracket
28
SPLIT-GAS AIR CONDITIONING
2
SPLIT-GAS AIR CONDITIONING
R Series (20K-48K) Condensing Units
Seawater-Cooled Condensers With Reverse-Cycle Heating
Key Benefits
■■
Higher efficiency compressors at lower
amperages
■■
Service ports on refrigerant lines and
base valves
■■
Compressor vibration-isolation mounts
minimize noise and vibration
■■
Condensate drain pan with front and rear
drain stems
■■
Environmentally safe R-417A refrigerant
■■
Condensate drain pan with front and rear
drain stems
■■
Corner mounting brackets for easier
installation
Available in capacities from 20,000 to 48,000 BTU/hr, Type R remote condensing units represent
the next generation of seawater-cooled, reverse-cycle heat pumps for cooling and heating in
marine applications. Models up to 36,000 BTU/hr use reciprocating compressors, while the 48K
units use scroll compressors.
■■
High- and low-pressure switches
■■
Electrical box can be mounted remotely
■■
Optional seawater coil manifolds
■■
Additional vibration isolation kit available
These condensing units can be installed with up to two Cruisair cooling units, where the total
cooling unit capacity is equal to the condensing unit capacity. Some applications may allow three
cooling units on one condenser; contact the Cruisair Applications department for assistance in
design, prior to installation. In the cooling mode, full performance is available in seawater up to
90°F (32°C). In reverse-cycle heating, the unit will provide heat in seawater as low as 40°F (4.4°C).
■■
Charged, tested, and leak checked at the
factory
The high-efficiency compressors deliver full capacity at lower amperages. The newly designed,
one-piece electrical box with 3 ft. (0.9 m) cable can be remote mounted simply by removing one
screw (RN models have a secondary box). Additional service ports allow ease of charging and
servicing. The one-piece chassis/pan has two drain locations, and hold-down brackets secure all
four corners, allowing easier installation and removal. The Type R condenser is designed as a
drop-in for the older F type, with few modifications.
R type units are designed for installation in the vessel’s engine room or other mechanical space.
The unit is not affected by moisture, normal vibration, or ambient temperatures up to 140°F (60°C).
No ventilation is required.
Three different series of Type R units are available, depending on what type of control is desired.
Standard R units utilize the SA3 3-knob rotary switch assembly, RX units are controlled by the
SMX II microprocessor, and RN models use SMX Net microprocessors. The SMX units include the
respective SMX II or SMX Net power/logic boards. In addition, an SMXir or the new SMXht keypad/
display, a CXP connecting cable, and a TSEP temperature sensor must be purchased separately.
If networking RN units, CNP network cables are also needed.
ISO 9001:2008
L-2360
Rev. 20130118
3/4 /20
16.54/421
9/229
3.67/94
1/2 /13
16.54/421
9/229
3.67/94
380
50/3
2.8
3.3
30
10
8
1/2 /13
220
50/1
6.9
8.5
55
30
19
16.54/421
9/229
3.67/94
60/3
4.8
6.2
58
25
15
R*30
30000
230
60/1
7.7
9.6
61
40
24
R417A
16.75/426
15.75/401
20.875/531
18.75/477
5/8 /16
3/8 /10
19
220
50/1
5.3
6.6
55
R*24
24000
230
60/1
7
8.6
60
35
22
R417A
16.75/426
15.75/401
20.875/531
18.75/477
5/8 /16
3/8 /10
3/8 /10
R*20
20000
230
60/1
5.9
7.4
48
30
18
R417A
16.75/426
15.75/401
20.875/531
18.75/477
5/8 /16
60/3
5.9
6.6
58
25
17
220
50/1
8.7
10.6
70
35
22
16.54/421
9/229
3.67/94
3/4 /20
3/8 /10
R*36
36000
230
60/1
9.2
11.7
73
45
28
R417A
16.75/426
15.75/401
20.875/531
18.75/477
5/8 /16
60/3
7.1
7.9
68
30
15
220
50/1
9.8
12
76
40
24
460
60/3
3.5
4
36
15
10
11
417A
380
50/3
4
5.1
42
16.54/421
9/229
3.67/94
3/4 /20
3/8 /10
R*48
48000
230
60/1
11.3
16.6
104
60
39
R417A
16.75/426
15.75/401
20.875/531
18.75/477
5/8 /16
Width
Electrical
Box
Depth-Without
Elec. Box
Depth-With Elec. Box
L-2360
Rev. 20130118
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
NOTE: Drain fittings extend 1/4 in. (7 mm) from front and back of pan.
Max. Height
Dimensions
Environmentally
Responsible
Assembled in the USA
Dealer
1 ‘*’ is the designator for type of control. For mechanical controls, replace ‘*’ with ‘M’. For SMX Net replace with ‘N’, indicate ‘X’ for SMX II and use ‘Q’ for Q-Logic.
2 For a specific voltage, add the following after the capacity designator: ‘C’ for 230V/60Hz/1-Phase, ‘CK’ for 220-240/50Hz/1-Phase, ‘D’ for 230V/60Hz/3-Phase, ‘E’ for 460V/60Hz/3-Phase, and ‘ECK’ for 380V/50Hz/3-Phase. Adding nothing will indicate 115V/60Hz/1-Phase (not available for multi-ton models).
3 For information about voltages not shown in this sheet, please contact Dometic Marine sales at 954-973-2477.
4 Some 60Hz equipment can be operated in a 50Hz environment but at a 17% decrease in capacity. Full-rated capacity can be obtained by specifying Cruisair “CK” (220V/50Hz) equipment.
5 Compressor starting current will vary with voltage but is approximately 3 to 4 times the full-load amps.
6 Height shown is for electrical box with Q-Logic (RQ models) and SMX II (RX models) control systems. Height with mechanical control (RM models) is 16.20 in. (412 mm); with SMX Net (RN models) the height is 16.58 in. (422 mm).
7 Depth shown is for electrical box with Q-Logic control system (RQ models). Depth with SMX II control (RX models) is 3.70 in. (94 mm); with SMX Net control (RN models) the depth is 7.16 in. (182 mm); with mechanical control the depth is 3.63 in. (93 mm).
Model (1)(2)(3)
Capacity (BTU/h)
Voltage (V) (4)
Cycle (Hz)/Phase (Ph)
Full Load Amps (FLA) Cool (A) (5)
Full Load Amps (FLA) Heat (A)
Locked Rotor Amps (LRA) (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Refrigerant Type
Max. Height (in/mm)
Width (in/mm)
Depth-With Elec. Box (in/mm)
Depth-Without Elec. Box (in/mm)
Seawater Inlet Connection (in/mm)
Refrigerant Line Connection-Discharge
(in/mm)
Refrigerant Line Connection-Suction (in/
mm)
Height-Electrical Box (in/mm) (6)
Width-Electrical Box (in/mm) (4)
Depth-Electrical Box (in/mm) (7)
Specifications for R Series (20K-48K) Condensing Units
60/3
8.7
11.3
93
45
25
220
50/1
12.4
17.3
133
60
38
460
60/3
4.3
5.7
48
20
12
14
380
50/3
5.5
6.5
60
30
SPLIT-GAS AIR CONDITIONING
3
SPLIT-GAS AIR CONDITIONING
EW
N
TurboVap Series Evaporators
Reduced Size, Noise & Power Draw
Key Benefits
The TurboVap Series of direct expansion (DX) split-gas evaporators for boats is based on the
revolutionary engineering advancements of the award-winning Turbo self-contained air conditioning
system. Featuring a rust-free molded composite drain pan, condensate water is rapidly removed at
one of two easy-to-plumb drain locations. The pan also has innovatively designed anti-slosh ridges
and “positive flow” channels to ensure condensate does not spill even in the roughest seas.
For improved installation ease and flexibility, the enclosed blower motor eliminates overhang
and the blower can be rotated 270° with a single adjustment screw. The unit’s unique inlet ring is
designed to optimize air flow and ensure that the height of the unit does not increase when the
blower rotates. The fully insulated, high-velocity blowers are quiet and efficient.
Experience better noise reduction with the TurboVap Series’ built-in cushioning system which
minimizes vibration to the deck. Additionally, the innovative mounting clips utilize vibration isolators.
TurboVap units can be paired with condensers that use either R-22 or R-417A refrigerants. See
the Emerald Series of TurboVaps and condensers for a complete split system that uses R-410A
refrigerant.
The rust-free composite
drain pan reduces standing
water up to 85%, thanks
to "positive-flow" drain
channels. These channels
also help prevent spilling and
sloshing in rough seas.
ISO 9001:2008
Optional lineset extentions
for discharge and suction are
available for all TurboVap
models.
L-2695A
Rev. 20120803
■■
Up to 28% reduced amperage
■■
Up to 85% reduction in standing water in
the drain pan
■■
Up to 14% increase in cooling capacity
■■
Up to 15% lighter
■■
Up to 17% reduction in height
■■
Up to 19% increased air flow CFM
■■
Rust-free composite drain pan
■■
Drain pan features anti-slosh, "positiveflow" drain channels for no spills and
rapid removal of condensate
■■
Up to 15 minutes faster to install
■■
Single adjustment screw for 270° of
blower rotation
■■
High-velocity (HV) fully-insulated blowers
are rotatable
■■
Vibration-isolation mounts reduce noise
and vibration
■■
115V and 230V models
■■
Can be used with R-22 or R-417A
condensers
TV4
4000
115
230
0.82
0.41
5
2
1
10.8/275
10.8/275
12.3/313
9.5/242
4/102
32/207
64/413
10.5/4.8
18/8.2
TV6
6000
115
230
0.82
0.41
5
2
1
10.8/275
10.8/275
12.3/313
9.5/242
4/102
32/207
64/413
11/4.1
19/8.7
TV8
8000
115
1.56
5
2
10.8/275
11.4/290
12.3/313
9.4/239
5/127
48/310
80/517
13.9/6.4
20.75/9.5
14/6.4
22/9.1
230
0.83
TV10
10000
115
1.14
5
2
12.6/321
12.6/321
14.3/364
10.4/265
6/153
60/388
110/710
17.5/7.1
25.5/11.6
25/11.4
1
230
0.61
TV12
12000
115
230
1.14
0.61
5
2
1
12.6/321
12.6/321
14.3/364
10.4/265
6/153
70/452
130/839
17.5/7.1
25.5/11.6
L-2695A
Rev. 20120803
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
TV16
16000
115
1.61
5
3
13/331
13.6/346
14.3/364
11.6/295
7/178
81/523
160/1033
19.8/8.1
26.75/12.2
21/9.6
28.25/12.9
1
230
0.78
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 Add ‘115V’ or ‘230V’ to the model number for 115V and 230V units, respectively.
2 All dimensions ± 0.30 in. (8 mm).
3 All weights ± 10%
Model (1)
Capacity (BTU/h)
Voltage @ 50/60Hz 1-Ph (V)
Full Load Amps (FLA) Cool (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Height-Coil (in/mm) (2)
Height-Blower (in/mm) (2)
Width (in/mm) (2)
Depth (in/mm) (2)
Min. Supply Duct Size (in/mm)
Min. Supply Air Grille Size (sq in/sq cm)
Min. Return Air Grille Size (sq in/sq cm)
Net Weight (lbs/kg) (3)
Gross Weight (lbs/kg) (3)
Specifications for TurboVap Series Evaporators
Environmentally
Responsible
Depth
HeightBlower
Assembled in the USA
Dimensions
Dealer
Width
HeightCoil
32
SPLIT-GAS AIR CONDITIONING
3
SPLIT-GAS AIR CONDITIONING
RM Series Modulating Condensing Units
Capable of Cooling Up to Five Zones
Key Benefits
The new RM model remote modulating condensing units are the next generation of directexpansion, cooling only air conditioning units designed to run multiple cooling units (evaporators)
with up to five independent zones. Models are available in capacities of 24, 30 and 42,000 BTU/Hr.
Total cooling unit capacity should be within 15% of the condensing unit capacity.
The new RM model has a number of improvements. Higher efficiency compressors deliver full
capacity even under heavy loads. The newly designed, one-piece electrical box with 3 ft. (0.9 m)
cable can be remote mounted simply by removing one screw. Additional service ports have been
added for ease of charging and servicing. The one-piece chassis/pan has two new drain locations.
New style hold-down brackets secure all four corners and allow for easier installation and removal.
The RM assembly consists of a scroll compressor, cupronickel condenser, and service/base
valves, all mounted on a newly designed condensate drain pan. Custom designed components
that protect the compressor when operating at full and partial loads include: high and low pressure
switches, large capacity receiver and accumulator, hot gas bypass valve, and a thermal expansion
de-superheat valve. The bypass valve senses low suction pressure when cooling units are shut
off, and allows refrigerant to bypass back into the compressor. The de-superheat valve evaporates
refrigerant into the compressor when superheat is too high.
An electrical control and relay box is mounted on the chassis, but can be remote mounted on a 3
ft. (0.9 m) harness for easy access. It includes control triggers, time delay, power relay, and start
and run capacitors with a solid state relay for single-phase units, or a contactor for three-phase
compressors.
It is designed to be installed in the engine room or other mechanical space, and is not adversely
affected by moisture, vibration, or ambient temperatures up to 140°F (60°C). No ventilation is
required.
ISO 9001:2008
L-2366
Rev. 20130222
■■
One RM condenser can cool up to five
independent zones
■■
Hot-gas bypass and de-superheat valves
■■
High-efficiency scroll compressors
■■
Service ports on refrigerant lines and
base valves
■■
Compressor vibration-isolation mounts
minimize noise and vibration
■■
Condensate drain pan with front and rear
drain stems
■■
Condensate drain pan with front and rear
drain stems
■■
Corner mounting brackets for easier
installation
■■
High- and low-pressure switches
■■
Electrical box can be mounted remotely
■■
Optional seawater coil manifolds
■■
Additional vibration isolation kit available
■■
Charged, tested, and leak checked at the
factory
113/51.3
136/61.7
16.2/412
9/229
3.63/93
113.5/51.5
146/66.3
16.2/412
9/229
3.63/93
3/4 /20
3/4 /20
1/2 /13
230
60/3
5.2
6.9
58
25
16
3/8 /10
79
45
25
220
50/1
8.25
RM30
30000
230
50/1
9.2
N/A
87
50
30
R417A
18.5/470
15.75/401
20.875/531
18.75/477
14
17
5/8 /16
3/8 /10
RM24
24000
230
60/1
8
N/A
67
40
24
R417A
18.5/470
15.75/401
20.875/531
18.75/477
14
17
5/8 /16
73
35
21
230
60/3
6.7
113.75/51.6 126/57.2
144.5/65.6 160/72.6
79
45
25
8.25
220
140/63.6
171/77.6
16.2/412
9/229
3.63/93
3/4 /20
3/8 /10
RM42
42000
230
60/1
11.3
N/A
104
60
39
417A
18.5/470
15.75/401
20.875/531
18.75/477
14
17
5/8 /16
136/61.7
97
50
30
220
50/1
10.9
L-2366
Rev. 20130222
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
132.5/60.2
161.25/73.2
93
45
25
230
60/3
8.7
Environmentally
Responsible
Depth-With Elec. Box
Height
Assembled in the USA
Depth-Without Elec. Box
Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 Add a ‘C’ for 230V/60Hz/1-Ph, ‘CK’ for 220-250V/50Hz/1-Ph, or ‘DC’ for 230V/60Hz/3-Ph. For example, RM24DC = 230V/60Hz/3-ph unit.
2 Some 60Hz equipment can be operated in a 50Hz environment but at a 17% decrease in capacity. Full-rated capacity can be obtained by specifying Cruisair “CK” (220V/50Hz) equipment.
3 For information about voltages not shown in this sheet, please contact Dometic Marine sales at 954-973-2477.
4 Compressor starting current will vary with voltage but is approximately 3 to 4 times the full-load amps.
5 All dimensions ± 0.30 in. (8 mm).
6 All weights ± 10%
Model (1)
Capacity (BTU/h)
Voltage (V) (2)(3)
Cycle (Hz)/Phase (Ph)
Full Load Amps (FLA) Cool (A) (4)
Full Load Amps (FLA) Heat (A)
Locked Rotor Amps (LRA) (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Refrigerant Type
Height (in/mm) (5)
Width (in/mm) (5)
Depth-With Elec. Box (in/mm) (5)
Depth-Without Elec. Box (in/mm) (5)
Mount-Width (in) (5)
Mount-Depth (in) (5)
Seawater Inlet Connection (in/mm)
Refrigerant Line Connection-Discharge
(in/mm)
Refrigerant Line Connection-Suction
(in/mm)
Net Weight (lbs/kg) (6)
Gross Weight (lbs/kg) (6)
Height-Electrical Box (in/mm)
Width-Electrical Box (in/mm)
Depth-Electrical Box (in/mm)
Specifications for RM Series Modulating Condensing Units
Dealer
Width
Mount-Width
MountDepth
34
SPLIT-GAS AIR CONDITIONING
3
SPLIT-GAS AIR CONDITIONING
EMB/EHMB Series Modulating Evaporators
High-Efficiency Cooling Units for RM Modulating Condensers
Key Benefits
Cruisair modulating DX evaporators are ductable cooling only (EMB) or cooling with electric
heating (EHMB) units with built-in refrigerant solenoid valves and high-efficiency blowers. Cruisair
modulating air conditioning systems allow up to five independent temperature-controlled zones on
one RM type modulating condensing unit (see spec sheet L–2366).
EMB and EHMB units are designed to be installed low in a closet or cabinet, with supply air ducted
to grilles high in the cabin. Units are available in capacities from 4,000 to 16,000 BTU/hr. EMB
models are cool only while EHMB feature electric heat with high-temperature insulation to meet
ABYC requirements.
All metal surfaces over which air passes are covered with insulating foam to reduce secondary
condensation and noise. The condensate pan has an anti-slosh, antifungal foam lining and rubber
mounting feet for noise and vibration control as well as easy installation.
The high-efficiency blower can be rotated so the air can be discharged in different directions. The
permanent split capacitor (PSC) motor is internal to the blower wheel and housing, which results
in a quiet unit with excellent performance and speed control, especially when used with a Cruisair
SMX series control.
An electrical junction box is included with the unit, and has a 3 ft. (1 m) wire harness so it can be
mounted in an accessible location.
EMB and EHMB cooling units can be controlled locally with a mechanical switch assembly, SMX II
microprocessor (SMX II power/logic box, control, and cables are sold separately), or the Q-Logic
microprocessor system with Qht or Q3 display.
Remote monitoring via the central boat monitoring system or Cruisair’s Gateway network is
possible with the Q-Logic control system and optional CAN-bus adapter board.
ISO 9001:2008
L-0954
Rev. 20130111
■■
High-efficiency cooling units for use with
Cruisair RM modulating condensers
■■
Integrated refrigerant solenoid valves
■■
Variable-speed, high-efficiency PSC
blowers are rotatable
■■
Insulated condensate pan with anti-slosh,
anti-fungal foam lining
■■
Vibration isolation mounting system
reduces noise and vibration
■■
Available with electric heat (EHMB
models)
■■
Remote control via ship's network is
available - requires Q-Logic control with
CAN bus adapter and Gateway Network
Interface (sold separately)
EHMB4
4000
230
0.6
10
6
1
4.35
200/340
10/254
10.8/275
13.8/351
4/102
32/207
64/413
1/4
3/8
EHMB6
6000
230
0.6
10
6
1
4.35
200/340
12.25/312
11.5/293
15.75/401
5/127
35/226
70/452
1/4
3/8
EHMB8
8000
230
0.6
10
6
1
4.35
200/340
12.25/312
11.5/293
15.75/401
5/127
47/304
89/575
1/4
3/8
EHMB10
10000
230
0.7
10
8
1.5
6.57
300/510
13.25/337
13/331
17/432
6/153
60/388
100/646
1/4
3/8
EHMB12
12000
230
0.7
10
10
2
8.7
400/680
13.25/337
13/331
17/432
6/153
70/452
130/839
1/4
3/8
EHMB16
16000
230
0.9
15
11
2
8.7
530/901
17.13/436
14.5/369
19/483
7/178
80/517
160/1033
1/4
1/2
L-0954
Rev. 20130111
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Environmentally
Responsible
Depth
Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 Specifications shown are for units with electric heat (EHMB models). For technical information about units without heat (EMB models) please contact Dometic Marine sales at 954-973-2477.
2 All dimensions ± 0.30 in. (8 mm).
Model (1)
Capacity (BTU/h)
Voltage @ 50/60Hz 1-Ph (V)
Full Load Amps (FLA) Blower (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Electric heat (kW)
Heater Amps (A)
Air Flow (cfm/m3h)
Height (in/mm) (2)
Width (in/mm) (2)
Depth (in/mm) (2)
Min. Supply Duct Size (in/mm)
Min. Supply Air Grille Size (sq in/sq cm)
Min. Return Air Grille Size (sq in/sq cm)
Refrigerant Line Connection-Discharge (in)
Refrigerant Line Connection-Suction (in)
Specifications for EMB/EHMB Series Modulating Evaporators
Assembled in the USA
Dealer
Height
Width
36
SPLIT-GAS AIR CONDITIONING
3
SPLIT-GAS AIR CONDITIONING
ls n
oo O
C ple k
o ec
Pe D
CoolBreeze Boat Exterior Cooling Kits
Keep People On Deck Cool With Jets of Chilled Air
Key Benefits
CoolBreeze system components: RSC12 condensing unit, remote electrical box, dual SCE6 evaporating units,
and adjustable air nozzles
CoolBreeze provides an efficient and compact solution to exterior deck areas which may be too
hot to enjoy during warmer weather. CoolBreeze blows high-velocity jets of chilled air directly on
people, enhancing their enjoyment of outdoor dining and lounge areas and sport-fishing decks.
To maintain the vessel’s aesthetic appeal, CoolBreeze uses 3 in. (76 mm) PVC conduit that is
easily hidden, leaving only the one-inch adjustable air nozzles that concentrate the chilled air on
people.
A single switch activates the system which will run automatically based on two temperature set
points. The first is set to a lower temperature to blow ambient air, and the second is set to a
higher temperature to engage the compressor for chilled air. CoolBreeze will run until the ambient
temperature drops and will power off in reverse.
The system uses R-417A, an environmentally safe refrigerant approved by the EPA. CoolBreeze
can be easily incorporated during boat construction, but can also be retrofitted.
How CoolBreeze Works
Dual SCE evaporators deliver
chilled air via 3 in. PVC
conduit to exterior deck areas
3 in. PVC conduit
3 in. PVC conduit concealed
in main header
High-velocity
chilled air
High-velocity jets of chilled
air blow directly on people
SCE evaporators can be
concealed in storage areas
or under bench seating
ISO 9001:2008
The adjustable air nozzle
can be rotated to aim
chilled air at people
L-2629
Rev. 20131206
■■
Allows the use of outdoor areas
previously too hot to enjoy during warmer
weather
■■
Highly-efficient system for cooling people
on deck exteriors rather than interior
spaces
■■
Operates automatically based on ambient
outdoor temperature
■■
Unobtrusive installation maintains the
vessel's aesthetic appeal
■■
Easily incorporated during boat
construction but can also be retrofitted
■■
SCE evaporators are insulated against
secondary condensation
■■
Environmentally safe R-417A refrigerant
■■
Insulated condensate pan with anti-slosh,
anti-fungal foam lining
RSC12 Condenser
12000
230
5.9
N/A
34
20
13
N/A
N/A
12.5/318
12.2/310
15.1/384
N/A
5/8 /16
1/4 /7
3/8 /10
12.88/328
9.25/235
3.87/99
31
15
11
220
5.4
L-2629
Rev. 20131206
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
SCE6 Evaporator
6000
230
N/A
1.74
N/A
5
2
1772
2186
14/356
15.5/394
10/254
130/839
N/A
1/4 /7
3/8 /10
N/A
N/A
N/A
Environmentally
Responsible
Width
Assembled in the USA
Height
Dealer
Depth
RSC12 CONDENSING UNIT DIMENSIONS
Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
Model
Capacity (BTU/h)
Voltage @ 50/60Hz 1-Ph (V)
Full Load Amps (FLA) Cool (A)
Full Load Amps (FLA) Blower (A)
Locked Rotor Amps (LRA) (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Min. Air Velocity Per Nozzle (ft/s)
Max. Air Velocity Per Nozzle (ft/s)
Height (in/mm)
Width (in/mm)
Depth (in/mm)
Min. Return Air Grille Size (sq in/sq cm)
Seawater Inlet Connection (in/mm)
Refrigerant Line Connection-Discharge (in/mm)
Refrigerant Line Connection-Suction (in/mm)
Height-Electrical Box (in/mm)
Width-Electrical Box (in/mm)
Depth-Electrical Box (in/mm)
Specifications for CoolBreeze Boat Exterior Cooling Kits
Depth
Height
Width
SCE6 EVAPORATING UNIT DIMENSIONS
38
SPLIT-GAS AIR CONDITIONING
3
CHILLED WATER AIR CONDITIONING
R
e
re
G
A s
10 a
-4 G
TWCV Series Modular Chillers
Enclosed Modular Chillers with a Compact Footprint
Key Benefits
Cruisair’s TWC Compact is a high-performance, cost effective tempering unit. The reverse cycle
TWC cools and heats, and is available in an expanded product range of 24,000 (2-ton) to 72,000
(6-ton) BTU/hr capacities. The three new models include 48,000 (4-ton), 60,000 (5-ton), and
72,000 (6-ton) BTU/hr units. Units can be multiplexed for even larger capacities as required.
Each unit includes a chilled water (CW) flow switch, refrigerant high- and low-refrigerant pressure
switches, and inlet and outlet CW temperature sensors. The TWC does not include a chilled water
modulating flow control, which means air handlers with or without flow controls can be used.* The
brazed platecoil evaporator and coaxial cupronickel seawater condenser allow for superior cooling
and heating performance.
On 2- to 3-ton units, an electrical box mounted on top of the chiller houses the control board as
well as starting components, and can be mounted remotely up to 6 ft. (1.8 m) away. On 4- to 6-ton
units, the electric box is normally contained within the enclosure and does not contribute to height.
A remote electric box is available upon request for 4- to 6-ton units.
Two control systems are available. The standard control is our proven Digital Diagnostic Control
(DDC) that provides simple, single-stage operation. For multiplexed systems, the Tempered Water
Logic Control (TWLC) with LCD screen is available. Depending on the configuration, additional
cables, switches, sensors, or a display may be required.
All TWC chillers come with R-410A, the preferred environmentally safe refrigerant used in modern,
high-efficiency air conditioning systems.
*On larger boats we always recommend using flow-controlled air handlers to ensure proper water
distribution. A balancing flow control (BFC) is not needed when using TWC chillers.
TWC modular chillers have a
compact footprint and feature
a fully enclosed design.
ISO 9001:2008
L-2430
Rev. 20131122
■■
Compact, enclosed design
■■
Reverse-cycle heating
■■
High-efficiency rotary or scroll
compressors
■■
Includes flow switch, high- and lowpressure switches, and inlet and outlet
circulated water temperature sensors
■■
Large heat exchangers for superior
performance in booth cooling and heating
■■
Engineered to maximize the performance
of R-410A, an environmentally safe
refrigerant
■■
Electrical box can be mounted remotely
(TWCV24 and 36 models)
18.6/473
22.6/575
13/331
18.8/478
19.4/493
5/8 /16
1
HB
22.6/575
13/331
18.8/478
19.4/493
5/8 /16
1
HB
380
50/3
3.5
4.6
45
20
13
TWCV30
30000
230
60/1
9.1
13.2
96.7
60
34
R410A
18.6/473
TWCV24
24000
220
50/1
9.5
11.8
63
45
28
R410A
220
50/1
10.3
12
63
45
28
230
60/3
7.2
9.1
73
35
21
22.6/575
13/331
18.8/478
19.4/493
5/8 /16
1
HB
18.6/473
TWCV36
36000
230
60/1
12
15.7
105
70
43
R410A
220
50/1
9.6
12.7
63
45
28
230
60/3
8.3
10.9
95
50
27
3.9
5
45
20
13
460
380
50/3
5.1
6.6
50
27
15
23.4/595
13.3/338
18.8/478
23.9/608
11/4 /32
1
FPT
23.4/595
TWCV48
48000
230
60/1
13.8
20.2
150
80
48
R410A
Width
Height-w/o
Elec. Box
Max Depth
Depth-Drain Pan
Width
Height-w/
Elec. Box
L-2430
Rev. 20131122
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
220
50/1
14.7
21.4
130
90
50
230
60/3
11.3
14
120
58
33
Specifications and availability subject to change without notice.
Max Depth
Depth-Drain Pan
Elec. Box is
within the
enclosure
TWC 48,000 - 72,000 BTU/H MODELS
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
Height-w/
Elec. Box
Elec. Box
TWC 24,000 - 36,000 BTU/H MODELS
Dimensions
1 Add a ‘C’ for 230V/60Hz/1-Ph, ‘CK’ for 220-250V/50Hz/1-Ph, ‘DC’ for 230V/60Hz/3-Ph, ‘ECK’ for 460V/60Hz/3-Ph, or ‘EC’ for 380V/50Hz/3-Ph. For example, TWCV24DC = 230V/60Hz/3-ph unit.
2 For information about voltages not shown in this sheet, please contact Dometic Marine sales at 954-973-2477.
3 All dimensions ± 0.30 in. (8 mm).
Model (1)
Capacity (BTU/h)
Voltage (V) (2)
Cycle (Hz)/Phase (Ph)
Full Load Amps (FLA) Cool (A)
Full Load Amps (FLA) Heat (A)
Locked Rotor Amps (LRA) (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Refrigerant Type
Height-Without Elec. Box (in/
mm) (3)
Height-With Elec. Box (in/mm) (3)
Max. Width (in/mm) (3)
Depth-Drain Pan (in/mm) (3)
Max. Depth (in/mm) (3)
Seawater Inlet Connection (in/mm)
Chilled Water Connection Size (in)
Chilled Water Connection Type
Specifications for TWCV Series Modular Chillers
Environmentally
Responsible
5.2
6.6
60
30
17
460
380
50/3
5.8
7.6
70
33
19
Assembled in the USA
23.4/595
13.3/338
18.8/478
23.9/608
11/4 /32
11/4
FPT
23.4/595
TWCV60
60000
230
60/1
15.8
23
145
101
57
R410A
220
50/1
22.2
29.1
130
100
Dealer
230
60/3
11.3
14.8
123
60
34
5.9
7.4
70
33
19
460
380
50/3
8.3
10.8
87
42
24
23.4/595
13.3/338
18.8/478
23.9/608
11/4 /32
11/4
FPT
23.4/595
TWCV72
72000
230
60/1
20.1
29.3
145
94
53
R410A
60/3
16.2
20.1
160
81
45
7.1
8.9
87
42
24
460
380
50/3
10.1
13.3
100
40
CHILLED WATER AIR CONDITIONING
4
CHILLED WATER AIR CONDITIONING
R
e
re
G
A s
10 a
-4 G
MTDV Series Modular Chillers
Engineered for Environmentally Safe R-410A Refrigerant
Key Benefits
The Cruisair MTD is a modular chiller engineered for optimal use of the new environmentally safe
R-410A refrigerant. This tempered-water unit provides installation flexibility, reliability, maximum
performance, and easy accessibility for maintenance and repair.
Flexible hose improves alignment for customer connections, and all seawater connections are
reinforced with stainless-steel for added strength. Thermal expansion valves optimize performance
over a wide range of conditions, while a hot-gas bypass valve maintains heating performance in
cold seawater and helps prevent water freezing in the heat exchanger. With heating performance
effective in cold seawater temperatures as low as 38°F (3.5°C), the need for separate fossil fuel or
electric water heaters is eliminated in most applications.
The MTD is available in capacities of 24,000 to 120,000 BTU/hr (2 to 10 tons), and you can use
multiple modules in any combination to achieve the total desired capacity. Custom frame and
water-manifold installation for multiple units are also available. A reverse-cycle unit, the MTD
provides reliable cooling and heating.
Each MTD unit has two sub-modules. This lets you rotate a sub-module to achieve more
convenient water-connection locations or compressor access. The sub-modules can even be
separated for remote mounting when space is limited. Sub-module changes can be handled in the
field or special ordered from the factory.
The MTD has many built-in protection devices. A wire harness with polarized plug is included for
easy electrical connections.
MTD units are available with several different compressors to suit a variety of power systems,
including: 230V/60Hz/1Ph, 220V/50Hz/1Ph, 230V/60Hz/3Ph, 380V/50hz/3Ph, and 460V/60Hz/3Ph.
Optional Variable Frequency Drives (VFDs) are available, which eliminate start-up power surge
and run the unit at full-capacity 60Hz even with 50Hz input. The VFD requires a 3-phase tempering
unit, but can operate on 1- or 3-phase input power.
ISO 9001:2008
L-2627
Rev. 20130215
■■
Engineered to maximize the performance
of R-410A, an environmentally safe
refrigerant
■■
Modular design for installation flexibility
■■
Reverse-cycle heating
■■
Scroll compressors standard
■■
Larger drain fittings for faster condensate
drainage
■■
Stainless-steel reinforced seawater
connections
■■
Flexible hose improves connection
alignment
■■
Removable seawater manifolds allow
cleaning of condenser tubing
■■
Integrated loop-water strainer and flow
switch
■■
Oversized heat exchangers for loop
temperatures of 40°F (4.4°C) in cooling
and 120°F (49°C) in heating
■■
Thermal expansion valve for optimal
performance over a range of conditions
■■
Hot-gas bypass valve maintains heating
performance in cold seawater and
helps prevent water freezing in the heat
exchanger
11.9
97
9.5
58.3
77
28.3/719
12.8/326
13.4/341
3/4 /20
1
FPT
12.8/326
12.8/326
5/8 /16
1
FPT
35
20
71
8.3
6.4
230
60/3
115
18
12.3
FPT
1
1 /26
13.4/341
12.8/326
28.3/719
25.3/643
70
43
42
R410A
23.5/597
105
15.7
12
Max. Depth
Depth-Drain Pan
16
9
38
4.2
3.3
460
MTDV36
36000
230
220
60/1
50/1
50
27
95
10.9
8.3
230
60/3
23
12
45
5
3.9
460
L-2627
Rev. 20130215
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
130
21.4
14.7
FPT
1
1 /26
13.4/341
12.7/323
28.3/719
25.1/638
80
90
48
50
R410A
23.5/597
150
20.2
13.8
MTDV48
48000
230
220
60/1
50/1
55
33
120
14
11.3
230
60/3
30
17
60
6.6
5.2
460
33
19
70
7.6
5.8
380
50/3
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
Max. Width
Width-Drain Pan
97
13
9.9
56
60
32
34
R410A
17/432
25.3/643
Dimensions
Max.
Height
45
20
13
12.2
8.4
25.3/643
25
95
4.06
3.11
460
MTDV30
30000
230
220
60/1
50/1
25.3/643
45
25
28
R410A
17/432
6.9
9.6
6.4
9
230
60/3
MTDV24
24000
230
220
60/1
50/1
1 All dimensions ± 0.30 in. (8 mm).
Model
Capacity (BTU/h)
Voltage (V)
Cycle (Hz)/Phase (Ph)
Full Load Amps (FLA)
Cool (A)
Full Load Amps (FLA)
Heat (A)
Locked Rotor Amps
(LRA) (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Refrigerant Type
Max. Height (in/mm) (1)
Width-Drain Pan (in/
mm) (1)
Max. Width (in/mm) (1)
Depth-Drain Pan (in/
mm) (1)
Max. Depth (in/mm) (1)
Seawater Inlet Connection
(in/mm)
Chilled Water Connection
Size (in)
Chilled Water Connection
Type
Specifications for MTDV Series Modular Chillers
130
29.1
22.2
FPT
11/4
1 /26
Environmentally
Responsible
13.4/341
12.7/323
28.3/719
25.1/638
100
101
57
R410A
23.5/597
145
23
17.8
MTDV60
60000
230
220
60/1
50/1
60
34
123
14.8
11.3
230
60/3
42
24
87
10.8
8.3
380
50/3
Assembled in the USA
33
19
70
7.4
5.9
460
160
17.9
14.2
Dealer
FPT
11/4
1 /26
13.4/341
12.7/323
28.3/719
25.1/638
94
80
53
45
R410A
23.5/597
145
29.3
20.1
MTDV72
72000
230
60/1
60/3
42
24
87
8.9
7.1
460
100
13.3
10.1
380
50/3
110
13.4
9.2
FPT
11/2
11/4 /32
17.7/450
16.7/425
36.85/936
33.1/841
100
40
57
24
R410A
23.9/608
235
25.5
20.3
MTDV96
96000
230
380
60/3
50/3
56
32
14.9
14.7
460
60/3
142
15.3
12.4
FPT
11/2
11/4 /32
17.7/450
16.7/425
36.85/936
33.1/841
103
50
58
29
R410A
27.8/707
267
31.3
25.3
MTDV120
120000
230
380
60/3
50/3
67
38
147
19.2
15.4
460
60/3
42
CHILLED WATER AIR CONDITIONING
4
CHILLED WATER AIR CONDITIONING
MTC Series Modular Chillers
High-Performance R-407C Tempering Units
Key Benefits
The MTC modular chiller series provides installation flexibility, reliability, maximum performance,
and accessibility for easy maintenance and repair.
■■
Modular design for installation flexibility
■■
Reverse-cycle heating
■■
Scroll compressors standard
■■
Dual sub-modules allow more convenient
water connections or separation for
remote mounting in tight spaces
■■
Removable seawater manifolds allow
cleaning of condenser tubing
■■
Integrated loop-water strainer and flow
switch
■■
Oversized heat exchangers for loop
temperatures of 40°F (4.4°C) in cooling
and 120°F (49°C) in heating
■■
Thermal expansion valve for optimal
performance over a range of conditions
■■
Hot-gas bypass valve maintains heating
performance in cold seawater and
helps prevent water freezing in the heat
exchanger
■■
Environmentally safe R-407C refrigerant
These reverse-cycle modules are available in capacities of 24,000-120,000 BTU/Hr (2 to 10 tons).
Up to six modules can be staged to achieve higher capacities.
MTC units have extremely large heat exchangers that make it possible to achieve loop water
temperatures of 40° F (4.4° C) in cooling, and 120° F (49° C) in heating. This also allows for
reverse-cycle heating effectiveness in seawater temperatures as low as 38° F (3.5° C), eliminating
the need for separate fossil fuel or electric water heaters in most applications.
MTCs have two sub-modules, identical in dimensions, which allow a sub-module to be rotated to
achieve more convenient water connection locations or compressor access. The sub modules
can even be separated for remote mounting when space is limited. Sub-module changes can be
handled in the field, or special ordered from the factory.
All units have built-in protection devices, including: high- and low-pressure switches, loop-water
flow switch, loop-water strainer, hot-gas bypass valve, and loop-water freeze sensor. A wire
harness with polarized plug is included for easy electrical connections.
ISO 9001:2008
L-0596
Rev. 20130125
Max. Width
Width-Drain Pan
220
50/1
7.6
10.8
71
R407C
32.3/821
230
60/3
5.22
7.1
55
1- or 3-ph.
Elec. Box
MTC30
30000
230
60/1
9.1
13.1
87
R407C
17/432
25.3/643
33.7/856
12.8/326
5/127
3/4 /20
1
FPT
75
220
50/1
9.4
MTC36
36000
230
60/1
10.5
14.9
95
R407C
23.5/597
25.3/643
33.7/856
12.8/326
5/127
1 /26
1
FPT
MTC48
48000
230
60/1
13.3
19.05
137
R407C
23.5/597
25.1/638
33.5/851
12.7/323
5/127
1 /26
1
FPT
220
50/1
14.9
21.1
138
L-0596
Rev. 20130125
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
32.1/816
230
60/3
9.2
12.2
114
380
50/3
6.4
8.4
58.6
MTC60
60000
230
60/1
17.6
25.4
148
R407C
23.5/597
25.1/638
33.5/851
12.7/323
5/127
1 /26
11/4
FPT
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
Max. Depth
Max.
Height
Dimensions
1 All dimensions ± 0.30 in. (8 mm).
MTC24
24000
230
60/1
6.8
10.4
68
R-407C
17/432
25.3/643
33.7/856
12.8/326
5/127
5/8 /16
1
FPT
1-ph.
3-ph.
Model
Capacity (BTU/h)
Voltage (V)
Cycle (Hz)/Phase (Ph)
Full Load Amps (FLA) Cool (A)
Full Load Amps (FLA) Heat (A)
Locked Rotor Amps (LRA) (A)
Refrigerant Type
Max. Height (in/mm) (1)
Width-Drain Pan (in/mm) (1)
Max. Width (in/mm) (1)
Max. Depth (in/mm) (1)
Clearance Manifold (in/mm)
Seawater Inlet Connection (in/mm)
Chilled Water Connection Size (in)
Chilled Water Connection Type
Specifications for MTC Series Modular Chillers
Environmentally
Responsible
220
50/1
12.8
16.9
128
Assembled in the USA
32.1/816
380
50/3
6.8
9.5
67
MTC66
66000
380
50/3
8.6
10.9
90.5
R407C
23.5/597
25.1/638
32.1/816
12.7/323
5/127
1 /26
11/4
FPT
Dealer
MTC72
72000
230
60/3
14.1
18.1
156
R407C
23.5/597
25.1/638
32.1/816
12.7/323
5/127
1 /26
11/4
FPT
6.9
9.3
75
460
MTC96
96000
230
60/3
19.6
25.5
195
R407C
26.8/681
33/839
39/991
16.6/422
6/153
11/4 /32
11/2
FPT
380
50/3
12.8
16.2
118
MTC120
120000
230
60/3
25.9
33.3
239
R407C
26.8/681
33/839
39/991
16.6/422
6/153
11/4 /32
11/2
FPT
13.5
17.3
125
460
17.6
110
380
50/3
44
CHILLED WATER AIR CONDITIONING
4
CHILLED WATER AIR CONDITIONING
MTS High-Capacity Modular Chillers
With Marine-Grade Shell-and-Tube Condenser
Key Benefits
MTS systems are high-capacity, marine-grade shell-and-tube chiller modules designed for large
pleasure yachts and commercial vessels. Optional electric-immersion heating can provide onboard comfort year round.
MTS chillers have a hermetic scroll compressor and a shell-and-tube marine-grade condenser,
along with other mechanical and electrical components on a single chassis. Multiple modules can
be staged as needed to meet the required load. Up to six modules are supported.
MTS chillers are designed for easy installation in tight spaces. They provide easy front access for
repair and maintenance of condenser tubes, heater rods, flow switch, compressor, and replaceable
drier cores. Safety measures include high-pressure switch, refrigerant pressure-relief valve, lowpressure switch, flow switch, high-limit switch, and freeze protection.
A filter drier keeps refrigerant oil clean and dry for long compressor life. With 100 percent pumpdown capacity, refrigerant circuit repairs can be made without recovering the refrigerant.
The MTS 25-ton (279,000 BTU/hr) chiller is available in 380V and 460V models.
ISO 9001:2008
L-2638
Rev. 20120824
■■
Up to six modules can be multiplexed for
larger capacities
■■
Hermetically-sealed compressor
■■
Marine-grade cupronickel shell-and-tube
condenser
■■
High-pressure switch and pressure-relief
valve for safety
■■
Dual bottom draining liquid connections
for optimal performance in choppy seas
■■
Filter drier keeps refrigerant oil clean and
dry for long compressor life
■■
100% pump-down capacity for making
circuit repairs without recovering the
refrigerant
■■
Optional variable frequency drives
smooth out compressor startup power
demand
MTS 25-Ton Modular Chiller
460
60/3
61.2/1555
21.75/553
40.2/1022
19.5/496
35.5/902
5/127
10/254
8/204
19.5/496
35.5/902
21.8/554
40.2/1022
380
50/3
L-2638
Rev. 20120824
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Condenser
Tube Access
Filter/Drier
Access
Width
Flowswitch
Heater 2
(optional)
Clearance Right
Assembled in the USA
Width Frame
Environmentally
Responsible
Clearance Left
Heater 1
(optional)
Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 All dimensions ± 0.30 in. (8 mm).
2 For staged modules, add a clearance of 5 in. (127 mm) and 10 in. (254 mm), alternately, between modules.
3 Allow 8 in. (203 mm) on water connection side for manifolds without isolation valve, and 14 in. (356 mm) for manifolds with isolation valve.
Model
Voltage (V)
Cycle (Hz)/Phase (Ph)
Max. Height (in/mm) (1)
Max. Width (in/mm) (1)(2)
Max. Depth (in/mm) (1)(3)
Width Frame (in/mm) (1)
Depth Frame (in/mm) (1)
Clearance Left (in/mm)
Clearance Right (in/mm)
Clearance Manifold (in/mm)
Specifications for MTS High-Capacity Modular Chillers
Dealer
Max.
Height
Depth Frame
Depth
Filter/Drier
Clearance
Manifold
46
CHILLED WATER AIR CONDITIONING
4
CHILLED WATER AIR CONDITIONING
N
ew
EU
e
ag
ck
Pa
Gold Series (AU-HV) Air Handlers
Rust-Free, Anti-Slosh Drain Pan With Quick & Easy Installation
Key Benefits
Completely redesigned for easier installation and improved performance, Gold Series air handlers,
recipient of an Honorable Mention at the 2012 International Boatbuilders Exhibition and Conference
(IBEX), incorporate many innovative features, including an optional Breathe Easy™ air purifier.
A rust-free, anti-slosh, positive-flow drain pan quickly removes condensate water and a third drain
hole can be employed to further increase drainage. Each drain hole is reinforced and has an
external stop to prevent over tightening of the screw-in hose barb.
To better accommodate a variety of installations, each drain hole can accept either a straight or
90-degree hose barb. In addition, the vibration-isolation mounting hardware can be attached at a
variety of locations along the perimeter of the drain pan.
Gold Series AU-HV air handlers feature high-velocity (HV) blowers. The rotatable blower ring
can be positioned easily by adjusting a single screw, and can even blow directly downward (best
achieved with the right-oriented version). Optional DC "WhisperCool" blowers are available.
The blower inlet adapter is made of a high-temperature resin to easily withstand the heat generated
by the optional internal electric heating element. Gold Series air handlers provide easy access to
the manual heater-overload safety switch, which is accessible without disassembling the unit.
The optional integrated Breathe Easy air purifier is positioned directly in the airstream and uses
ultraviolet (UV) light and photocatalytic nano-mesh technology to improve air quality without
producing any harmful ozone. The award-winning Breathe Easy eliminates odors and up to 99.9%
of VOCs and biological contaminants.
The drain pan features
anti-slosh, positive-flow
condensate channels,
reinforced drain holes, and
moveable vibration-isolation
mounting clips.
ISO 9001:2008
The Gold air handler's HV
blower can be easily rotated
in the field by loosening the
single adjustment screw on
the blower collar (standard
AU model shown).
The assembly for the optional
electric heater (top) and
Breathe Easy air purifier
(bottom) fits between the coil
and blower (standard AU
model shown).
L-3021
Rev. 20140117
■■
Rust-free composite drain pan
■■
Drain pan features anti-slosh, "positiveflow" drain channels for no spills and
rapid removal of condensate
■■
Vibration-isolation mounts reduce noise
and vibration
■■
Improved insulation
■■
Single adjustment screw for 270° of
blower rotation
■■
Blower can be rotated to straight down
position for overhead applications
■■
Easy access to heater overload reset
button
■■
Flexible mounting options
■■
Braided, kink-proof air bleeder hose
■■
Reinforced drain holes prevent
overtightening of hose barbs
Special Options
■■
Optional EU package upgrades include
improved insulation and wire loom,
protective cover for water-tube hairpins,
and more (see reverse side for details)
■■
Optional DC "WhisperCool" blowers are
extremely quiet yet powerful enough to
overcome high-static-pressure duct
■■
Optional integrated Breathe Easy™ air
purifier stops odors and is up to 99.9%
effective in neutralizing contaminants in
the air you breathe (not available for 6K
BTU models)
■■
Optional electric heat
■■
Optional flow control automatically
balances circulated water throughout the
system
■■
Optional Breathe Easy™ microparticle
air filter
■■
Left-oriented blower models
15
11
115
1.14
9.84
20
16
115
1.61
14.65
AU18HV
18000
10236
115
2.52
28.61
3
30
30
4.5/17.1
465/791
0.3/74.7
13.94/355
15.38/391
20.13/512
15/381
1/2
7/178
100/646
200/1291
15
15
230
1.18
14.22
AU24HV
24000
10236
230
1.64
14.68
3
20
16
6/22.8
506/860
0.3/74.7
15.25/388
16.75/426
22.63/575
15.38/391
1/2
8/204
140/904
240/1549
35
31
115
3.4
29.49
Max. Height
Max. Width
Min. Height
L-3021
Rev. 20140117
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
■■
■■
■■
■■
Environmentally
Responsible
Assembled in the USA
Dealer
Quick-plug electrical connections
Upgraded wire loom for improved appearance
Less space needed for plumbing connections
Easy access to bleeder assembly
Key Benefits
A capacitor, protected under a plastic housing (E), replaces the electrical box. In addition, a
slave box can be used to control multiple air handlers from a single cabing control, all with
plug-in connections. The plumbing connections (F) are shorter so the installation takes up
less space.
A plastic cover (A) protects the exposed water-tube hairpins. An upgraded wire loom (B) is
used for better aesthetics and all electrical connections use quick plugs (C) so there are no
wires to connect. A new durable bleeder assembly with cradle (D) gives easy access and
speeds the air bleeding process.
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
Max. Depth
Dimensions
1 Model numbers shown are for 115V units with high-velocity (HV) blowers. Add a ‘Z’ for 230V units; add ‘-FC’ for optional flow control; add ‘-L__’ or ‘-R__’ for valve position (relative to the coil) and
angle of the blower; add ‘__kW’ for amount of optional electric heat in kilowatts (for ex. 1.5kW). See DWG H3050002 for a visual explanation of valve orientation and blower angle.
2 All dimensions ± 0.30 in. (8 mm).
15
11
115
1.56
10.26
AU12HV
12000
6824
230
0.78
7.3
1.5
10
8
3/11.4
338/575
0.3/74.7
13.31/339
13.38/340
16.5/420
14.25/362
1/2
6/153
70/452
130/839
The EU Package includes several upgrades for reduced installation time and an improved
appearance.
AU9HV
9000
5118
230
0.61
4.96
1.5
10
6
2.3/8.8
278/473
0.3/74.7
13.31/339
13.31/339
16.5/420
13.25/337
1/2
6/153
49/317
98/633
Model (1)
Nominal Capacity - Cool (BTU/h)
Nominal Capacity - Heat (BTU/h)
Voltage @ 50/60Hz 1-Ph (V)
Full Load Amps (FLA) Cool (A)
Full Load Amps (FLA) Heat (A)
Optional Electric Heat (kW)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Water Flow (gpm/lpm)
Air Flow (cfm/m3h)
External Static Pressure (inH2O/Pa)
Min. Height (in/mm)
Max. Height (in/mm) (2)
Max. Width (in/mm) (2)
Max. Depth (in/mm) (2)
Chilled Water Connection Size (in)
Min. Supply Duct Size (in/mm)
Min. Supply Air Grille Size (sq in/sq cm)
Min. Return Air Grille Size (sq in/sq cm)
AU6HV
6000
TBD
230
0.83
5.18
1
10
6
TBD
TBD
TBD
11.19/285
12.13/309
14.5/369
12.56/320
1/2
5/127
35/226
70/452
About the EU Package
Specifications for Gold Series (AU-HV) Air Handlers
48
CHILLED WATER AIR CONDITIONING
4
CHILLED WATER AIR CONDITIONING
AT-HV Series Air Handlers
Compact Units With High-Velocity Blowers
Key Benefits
The AT-HV series of air handlers for marine HVAC chilled water systems are draw-though (ducted)
units with high-velocity (HV) blowers. The AT-HV series replaces Flex-Duct and Draw-Through
series air handers, and has many improvements and options over the older units.
Significant improvements include: sloped “Positive-Flow” drain pan which reduces standing water,
larger drain connections, improved coil design for better cooling and dehumidifying performance,
coil is offset from drain pan edge to ensure all condensation is caught in the pan, redesigned piping
so the bypass valve is clear of dripping condensation, pressure test ports for troubleshooting, and
the new 24,000 BTU/hr unit uses a high-efficiency, internal-motor blower for quieter operation. On
units with auxiliary (electric) heat, the new heater design allows removal from the top or side for
access or servicing.
All Marine Air air handlers use corrosion-resistant materials. They feature "positive-flow" drain pans
with anti-slosh foam lining and are fully insulated against secondary condensation. Electric heat is
optional.
AT air handlers are available with "WhisperCool" brushless DC blowers (AT-DC series).
ISO 9001:2008
L-2354
Rev. 20140117
■■
Compact design
■■
High-velocity (HV) fully-insulated blowers
are rotatable
■■
Improved cooling and dehumidification
■■
Drain pan has anti-slosh, anti-fungal foam
lining
■■
Vibration-isolation mounts reduce noise
and vibration.
■■
Exposed sheet metal is insulated against
secondary condensation
■■
Remote air bleeder on 6 ft. (1.8 m) of
flexible tubing with ball valve
■■
Electrical box can be remotely mounted
up to 6 ft. (1.8 m)
■■
Water-pressure test ports for
troubleshooting
■■
Allowance for connecting variable fanspeed drives
■■
Rotatable blowers
■■
Optional flow control automatically
balances circulated water throughout the
system
■■
Optional Electric Heat
■■
Optional Breathe Easy™ microparticle
air filter
0.3/74.7
12.13/309
13.31/339
16.88/429
12.13/309
1/2
FPT
1/2
0.3/74.7
10.25/261
11.25/286
15.25/388
12.38/315
1/2
FPT
0.3/74.7
9.75/248
9.75/248
15/381
10.25/261
1/2
FPT
49/317
98/633
35/226
70/452
8/204
6.13/156
2/51
32/207
64/413
8/204
6.13/156
2/51
8/204
6.13/156
2/51
FPT
6/153
1/2
FPT
5/127
1/2
FPT
4/102
1
5118
115
1.1
1.4
1.5
5
2
2.3/8.8
278/473
3412
115
230
1.6
0.9
1.2
0.6
1
5
2
1.5/5.7
229/390
TBD
115
1.06
0.8
N/A
5
2
1/3.8
130/221
230
0.41
0.4
9000
6000
4000
AT9HV
AT6HV
AT4HV
1
230
0.6
0.7
8/204
6.13/156
2/51
130/839
70/452
FPT
6/153
1/2
12.05/307
13.88/353
18.75/477
12.5/318
1/2
FPT
0.3/74.7
115
1.5
1.4
2
5
2
3/11.4
338/575
6824
12000
AT12HV
1
230
0.7
0.7
8/204
6.13/156
2/51
200/1291
100/646
FPT
7/178
1/2
15/381
15/381
20.38/518
13.5/343
1/2
FPT
0.3/74.7
115
2.3
2.2
3
5
3
4.5/17.1
465/791
10236
18000
AT18HV
2
230
1.18
1
8/204
6.13/156
2/51
240/1549
140/904
FPT
8/204
1/2
15.94/405
15.94/405
22.63/575
15/381
1/2
FPT
0.3/74.7
115
2.3
2.2
3
5
3
6/22.8
506/860
10236
24000
AT24HV
2
230
1.15
1
8/204
6.13/156
2/51
360/2323
196/1265
FPT
8/204
1/2
20/508
20/508
26.63/677
15.81/402
1/2
FPT
0.3/74.7
230
1.62
1.6
4
5
3
9/34.1
676/1149
13648
36000
AT36HV
L-2354
Rev. 20140117
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Environmentally
Responsible
Max. Width
Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 Model numbers shown are for 115V units with high-velocity (HV) blowers. Add a ‘Z’ for 230V units; add ‘-FC’ for optional flow control; add ‘-L__’ or ‘-R__’ for valve position (relative to the coil) and angle
of the blower; add ‘__kW’ for amount of optional electric heat in kilowatts (for ex. 1.5kW). See DWG H3050002 for a visual explanation of valve orientation and blower angle.
2 All dimensions ± 0.30 in. (8 mm).
Model (1)
Nominal Capacity - Cool
(BTU/h)
Nominal Capacity - Heat
(BTU/h)
Voltage @ 50/60Hz 1-Ph (V)
Full Load Amps (FLA) Cool (A)
Full Load Amps (FLA) Blower (A)
Optional Electric Heat (kW)
Max. Circuit Breaker (A) (2)
Min. Circuit Ampacity (A)
Water Flow (gpm/lpm)
Air Flow (cfm/m3h)
External Static Pressure
(inH2O/Pa)
Min. Height (in/mm) (2)
Max. Height (in/mm) (2)
Max. Width (in/mm) (2)
Max. Depth (in/mm) (2)
Drain Connection Size (in)
Drain Connection Type
Chilled Water Connection
Size (in)
Chilled Water Connection Type
Min. Supply Duct Size (in/mm)
Min. Supply Air Grille Size (sq
in/sq cm)
Min. Return Air Grille Size (sq
in/sq cm)
Height-Electrical Box (in/mm)
Width-Electrical Box (in/mm)
Depth-Electrical Box (in/mm)
Specifications for AT-HV Series Air Handlers
Assembled in the USA
Dealer
Max. Height
Max. Depth
Min. Height
50
CHILLED WATER AIR CONDITIONING
5
CHILLED WATER AIR CONDITIONING
oo
C y
er log
sp o
hi hn
W ec
T
AT-DC Series Air Handlers
Compact Units With DC "WhisperCool" Blowers
Key Benefits
The AT-DC series of chilled water air handlers represents the new standard in marine HVAC
engineering that you'll barely notice. Thanks to "WhisperCool" technology, the AT-DC series
harnesses engineering refinements to eliminate the annoying "motor hum" heard from ordinary
air handlers operating at very low fan speeds. Incoming alternating current is converted to drive
a brushless DC internal blower motor, resulting in super-quiet and highly-efficient performance
across all fan speeds.
Additional design changes in the air handlers eliminate condensate drain problems, reduce
dripping condensation and standing water issues. An improved coil enhances cooling and
dehumidification performance. The redesigned unit also creates easily accessible water-pressure
test points for troubleshooting and maintenance.
All Marine Air air handlers use corrosion-resistant materials. They feature "positive-flow" drain pans
with anti-slosh foam lining and are fully insulated against secondary condensation. Electric heat is
optional.
ISO 9001:2008
L-2426B
Rev. 20120824
■■
DC "WhisperCool" blowers are extremely
quiet yet powerful enough to overcome
high-static-pressure duct
■■
Improved cooling and dehumidification
■■
Drain pan has anti-slosh, anti-fungal foam
lining
■■
Vibration-isolation mounts reduce noise
and vibration.
■■
Exposed components are insulated
against secondary condensation
■■
Remote air bleeder on 6 ft. (1.8 m) of
flexible tubing with ball valve
■■
Electrical box can be remotely mounted
up to 6 ft. (1.8 m)
■■
Rotatable blowers
■■
Optional flow control automatically
balances circulated water throughout the
system
■■
Optional Electric Heat
■■
Optional Breathe Easy™ microparticle
air filter
AT6DC
6000
3412
230
1.4
1.4
1
4.3
5
2
1.5/5.7
200/340
2.9/722.1
11.08/282
13.63/347
14.81/377
14.27/363
1/2
FPT
1/2
FPT
5/127
35/226
70/452
8/204
6.13/156
2/51
AT9DC
9000
3412
230
1.4
1.4
1
4.3
5
2
2.25/8.6
300/510
2.8/697.2
11.79/300
13.73/349
16.48/419
14.55/370
1/2
FPT
1/2
FPT
6/153
49/317
98/633
8/204
6.13/156
2/51
AT12DC
12000
5118
230
3.2
3.2
1.5
6.5
5
4
3/11.4
400/680
2.6/647.4
12.05/307
13.94/355
18.75/477
14.49/369
1/2
FPT
1/2
FPT
6/153
70/452
130/839
8/204
6.13/156
2/51
AT18DC
18000
5118
230
3.9
3.9
1.5
6.5
5
5
4.5/17.1
600/1020
2.1/522.9
14.83/377
16.94/431
20.08/511
14.83/377
1/2
FPT
1/2
FPT
7/178
100/646
200/1291
8/204
6.13/156
2/51
AT24DC
24000
10236
230
3.9
3.9
3
13
5
5
6/22.8
700/1190
1.4/348.6
16.7/425
16.7/425
22.48/571
16.42/418
1/2
FPT
1/2
FPT
8/204
140/904
240/1549
8/204
6.13/156
2/51
AT36DC
36000
10236
230
3.9
3.9
3
13
5
5
9/34.1
800/1360
0.5/124.5
16.74/426
19.74/502
26.41/671
17.15/436
1/2
FPT
1/2
FPT
8/204
196/1265
360/2323
8/204
6.13/156
2/51
L-2426B
Rev. 20120824
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Environmentally
Responsible
Max. Depth
Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 ‘Z’ indicates 230V. Add ‘-FC’ for optional flow control; add ‘-LX’ or ‘-RX’ for valve position (relative to the blower side of the coil) and angle of the blower (‘-R0’ is the default); add ‘#kW’ for amount of
optional electric heat in kilowatts.
2 Blower amps will be reduced at lower speed/cfm or higher static pressure. Amps listed are at free air.
3 All dimensions ± 0.30 in. (8 mm).
Model (1)
Nominal Capacity - Cool (BTU/h)
Nominal Capacity - Heat (BTU/h)
Voltage @ 50/60Hz 1-Ph (V)
Full Load Amps (FLA) Cool (A) (2)
Full Load Amps (FLA) Blower (A)
Optional Electric Heat (kW)
Heater Amps (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Water Flow (gpm/lpm)
Air Flow (cfm/m3h)
External Static Pressure (inH2O/Pa)
Min. Height (in/mm) (3)
Max. Height (in/mm) (3)
Max. Width (in/mm) (3)
Max. Depth (in/mm) (3)
Drain Connection Size (in)
Drain Connection Type
Chilled Water Connection Size (in)
Chilled Water Connection Type
Min. Supply Duct Size (in/mm)
Min. Supply Air Grille Size (sq in/sq cm)
Min. Return Air Grille Size (sq in/sq cm)
Height-Electrical Box (in/mm)
Width-Electrical Box (in/mm)
Depth-Electrical Box (in/mm)
Specifications for AT-DC Series Air Handlers
Assembled in the USA
Min. Height
Dealer
Max. Width
Max. Height
52
CHILLED WATER AIR CONDITIONING
5
CHILLED WATER AIR CONDITIONING
ATL-HV Series Low-Profile Air Handlers
Ideal for Height-Restrictive Installations; High-Velocity Blowers
Key Benefits
The ATL-HV series of chilled water air handlers represents an improved design approach to lowprofile, draw-through air handlers. These "open top" units allow easier maintenance access and
reduced dimensions overall.
The top panel of ATL units can be removed for maintenance access to the blower(s). In this way,
the unit can be serviced without disturbing the drain pan. The drain stems face aft (toward the
blower side) to minimize footprint. Furthermore, the optional electric heaters are mounted on the
blower discharge instead of inside the plenum, thereby eliminating the depth added to the plenum
area for 6K-18K units.
The ATL-HV series features dual high-velocity (HV) blowers. Optional "WhisperCool" DC blowers
are available. These blowers are ultra quiet yet strong enough to overcome high-static-pressure
duct.
Capacities of the ATL-HV series are 6,000, 9,000, 12,000, 18,000, and 24,000 BTU/hr. A 16,000
BTU/hr unit is available (ATL16F) with dual tangential blowers. All ATL blowers are mounted
horizontally for an exceptionally low profile, making these units ideal for height-restrictive
installations. They can be suspended from above or supported from beneath and suspension
hardware is included. Vibration-isolation mounts reduce noise and the transmission of vibrations to
the installation platform.
The drain pan has an anti-slosh, anti-fungal foam lining and extends to under the valve motor and
plumbing. The water connections are insulated against secondary condensation, and the valve can
be mounted on the left (standard) or right (optional).
ISO 9001:2008
L-2553
Rev. 20121207
■■
Suspend from above or support from
beneath (hardware included)
■■
Vibration-isolation mounts reduce noise
and vibration
■■
Bypass valve has removable power head
for simple servicing
■■
Valve body is soldered to unit to prevent
leaks
■■
Electrical box can be remotely mounted
up to 6 ft. (1.8 m)
■■
Remote air bleeder on 6 ft. (1.8 m) of
flexible tubing with ball valve
■■
Optional DC "WhisperCool" blowers are
extremely quiet yet powerful enough to
overcome high-static-pressure duct
■■
Valve on left (standard) or on right
(optional)
■■
Automatic flow control helps balance
chilled water distribution throughout the
boat
■■
Optional Breathe Easy™ microparticle
air filter
3
10.1
230
1.8
1.4
ATL18HV
18000
230
1.8
1
2
9.7
5
3
4.5/17.1
550/935
0.3/74.7
8.1/206
8.1/206
31.6/803
25.5/648
19.8/503
1/2
tube stubs
1/2
FPT
6/153
49/317
200/1291
sloped
ATL24HV
24000
115
2.3
3.4
1.5
16.4
5
3
6/22.8
730/1241
0.3/74.7
10/254
10.1/257
42.9/1090
22/559
27.7/704
1/2
tube stubs
1/2
FPT
8/204
147/949
240/1549
sloped
2
7.8
230
1.15
1.3
ATL16F
16000
115
2.4
2.4
N/A
N/A
5
3
4/15.2
420/714
0.3/74.7
8.1/206
8.1/206
23.4/595
17.6/448
N/A
1/2
tube stubs
1/2
FPT
4/102
40/259
144/930
sloped
1
230
0.62
0.9
L-2553
Rev. 20121207
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Environmentally
Responsible
Depth-Without Heat
Suspension Mounts
Assembled in the USA
Width
Dealer
Width
Deck Mount
HeightDeck Mount
Heater elements on blower discharge
add 5.7 in. (145 mm) to depth on all models
Deck Mount
Deck Mount
HeightSuspension
Mount
HeightSuspension
Mount
Depth-With Heat
Depth-Without Heat
Suspension Mounts
ATL16F DIMENSIONS
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 Add ‘-FC’ at end of model name for optional flow control; the default valve position is to the left of the coil (as one faces it), so add ‘R’ to the model for the valve on the right side; add ‘#kW’ for amount
of optional electric heat in kilowatts.
2 1.5kW is recommended for the ATL24 because it has one blower. 2kW is the maximum.
3 Air flow data is for units without electric heat. Electric heat reduces air flow by an amount to be determined.
4 All dimensions ± 0.30 in. (8 mm).
5 ATL12, ATL18, and ATL36 models have dual blowers and therefore two supply duct rings.
ATL12HV
12000
115
3.12
3.2
2
20.6
5
4
3/11.4
400/680
0.3/74.7
8.1/206
8.1/206
31.6/803
17.9/455
23.6/600
1/2
tube stubs
1/2
FPT
6/153
35/226
130/839
sloped
ATL-HV SERIES DIMENSIONS
ATL9HV
9000
230
0.6
0.5
1
4.8
5
1
2.25/8.6
275/468
0.3/74.7
8/204
8.1/206
19.6/498
19.7/501
25.4/646
1/2
tube stubs
1/2
FPT
6/153
49/317
98/633
sloped
Model (1)
Nominal Capacity (BTU/h)
Voltage @ 50/60Hz 1-Ph (V)
Full Load Amps (FLA) Cool (A)
Full Load Amps (FLA) Blower (A)
Optional Electric Heat (kW) (2)
Heater Amps (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Water Flow (gpm/lpm)
Air Flow (cfm/m3h) (3)
External Static Pressure (inH2O/Pa)
Height-Deck Mount (in/mm) (4)
Height-Suspension Mount (in/mm)
Max. Width (in/mm) (5)
Depth-Without Heat (in/mm)
Depth-With Heat (in/mm)
Drain Connection Size (in)
Drain Connection Type
Chilled Water Connection Size (in)
Chilled Water Connection Type
Min. Supply Duct Size (in/mm)
Min. Supply Air Grille Size (sq in/sq cm)
Min. Return Air Grille Size (sq in/sq cm)
Pan Style
ATL6HV
6000
230
0.9
0.7
1
5
5
2
1.5/5.7
200/340
0.3/74.7
8/204
8.1/206
19.6/498
18/458
23.7/602
1/2
tube stubs
1/2
FPT
6/153
35/226
70/452
sloped
Dimensions
Specifications for ATL-HV Series Low-Profile Air Handlers
HeightDeck Mount
Deck Mount
54
CHILLED WATER AIR CONDITIONING
5
CHILLED WATER AIR CONDITIONING
oo
C y
er log
sp o
hi hn
W ec
T
ATL-DC Series Low-Profile Air Handlers
Whisper Quiet Units Ideal for Height-Restrictive Spaces
Key Benefits
The ATL-DC series of chilled water air handlers represents an improved design approach to lowprofile, draw-through air handlers. These "open top" units allow easier maintenance access and
reduced dimensions overall.
The top panel of ATL units can be removed for maintenance access to the blower(s). In this way,
the unit can be serviced without disturbing the drain pan. The drain stems face aft (toward the
blower side) to minimize footprint. Furthermore, the optional electric heaters are mounted on the
blower discharge instead of inside the plenum, thereby eliminating the depth added to the plenum
area for 6K-18K units.
The ATL-DC series features "WhisperCool" DC blowers that are ultra quiet yet strong enough to
overcome high-static-pressure duct.
Capacities of the ATL-DC series range from 6,000 to 36,000 BTU/hr. The blowers are mounted
horizontally for an exceptionally low profile, making these units ideal for height-restrictive
installations. They can be suspended from above or supported from beneath and suspension
hardware is included. Vibration-isolation mounts reduce noise and the transmission of vibrations to
the installation platform.
The drain pan has an anti-slosh, anti-fungal foam lining and extends to under the valve motor and
plumbing. The water connections are insulated against secondary condensation, and the valve can
be mounted on the left (standard) or right (optional).
ISO 9001:2008
L-2548
Rev. 20130920
■■
DC "WhisperCool" blowers are extremely
quiet yet powerful enough to overcome
high-static-pressure duct
■■
Improved design for easier servicing,
smaller dimensions overall
■■
Top panel is removable for easier service
access
■■
Dual blowers are mounted horizontally for
exceptionally low profile
■■
Suspend from above or support from
beneath (hardware included)
■■
Enclosed design
■■
Internal components are insulated against
secondary condensation
■■
Vibration-isolation mounts reduce noise
and vibration.
■■
Bypass valve has removable power head
for simple servicing
■■
Valve body is soldered to unit to prevent
leaks
■■
Electrical box can be remotely mounted
up to 6 ft. (1.8 m)
■■
Remote air bleeder on 6 ft. (1.8 m) of
flexible tubing with ball valve
■■
Valve on left (standard) or on right
(optional)
■■
Optional flow control automatically
balances circulated water throughout the
system
■■
Optional Electric Heat
■■
Optional Breathe Easy™ microparticle
air filter
ATL6DC
6000
230
1.4
1.4
1
5.7
5
2
1.5/5.7
200/340
1.75/435.8
8/204
8.2/209
19.6/498
19.7/501
25.4/646
1/2
tube stubs
1/2
FPT
6/153
35/226
70/452
sloped
ATL9DC
9000
230
1.4
1.4
1
5.7
5
2
2.25/8.6
275/468
0.6/149.4
8/204
8.2/209
19.6/498
19.7/501
25.4/646
1/2
FPT
1/2
FPT
6/153
49/317
98/633
sloped
ATL12DC
12000
230
2.8
2.8
2
11.5
5
4
3/11.4
400/680
1.75/435.8
8/204
8.2/209
31.5/801
17.9/455
23.6/600
1/2
tube stubs
1/2
FPT
6/153
35/226
130/839
sloped
ATL18DC
18000
230
2.8
2.8
2
11.5
5
4
4.5/17.1
550/935
0.6/149.4
8/204
8.2/209
31.5/801
17.9/455
23.6/600
1/2
tube stubs
1/2
FPT
6/153
49/317
200/1291
sloped
ATL24DC
24000
230
3.9
1.5
1.5
8
5
5
6/22.8
670/1139
0.3/74.7
10/254
10.1/257
43.8/1113
20.5/521
26.2/666
1/2
tube stubs
1/2
FPT
8/204
147/949
240/1549
sloped
ATL36DC
36000
230
7.8
3
3
16
30
23
9/34.1
1000/1700
0.3/74.7
10/254
10.1/257
61.8/1570
20.5/521
26.2/666
1/2
tube stubs
1/2
FPT
8/204
168/1084
360/2323
sloped
L-2548
Rev. 20130920
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Environmentally
Responsible
Depth-With Heat
Depth-Without Heat
Suspension Mounts
Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 Add ‘-FC’ at end of model name for optional flow control; the default valve position is to the left of the coil (as one faces it), so add ‘R’ to the model for the valve on the right side; add ‘#kW’ for amount
of optional electric heat in kilowatts.
2 1.5kW is recommended for the ATL24 because it has one blower. 2kW is the maximum.
3 Air flow data is for units without electric heat. Electric heat reduces air flow by an amount to be determined.
4 All dimensions ± 0.30 in. (8 mm).
5 ATL12, ATL18, and ATL36 models have dual blowers and therefore two supply duct rings.
Model (1)
Nominal Capacity (BTU/h)
Voltage @ 50/60Hz 1-Ph (V)
Full Load Amps (FLA) Cool (A)
Full Load Amps (FLA) Blower (A)
Optional Electric Heat (kW) (2)
Heater Amps (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Water Flow (gpm/lpm)
Air Flow (cfm/m3h) (3)
External Static Pressure (inH2O/Pa)
Height-Deck Mount (in/mm) (4)
Height-Suspension Mount (in/mm) (4)
Max. Width (in/mm) (4)
Depth-Without Heat (in/mm) (4)
Depth-With Heat (in/mm) (4)
Drain Connection Size (in)
Drain Connection Type
Chilled Water Connection Size (in)
Chilled Water Connection Type
Min. Supply Duct Size (in/mm) (5)
Min. Supply Air Grille Size (sq in/sq cm)
Min. Return Air Grille Size (sq in/sq cm)
Pan Style
Specifications for ATL-DC Series Low-Profile Air Handlers
Assembled in the USA
HeightSuspension
Mount
Width
Dealer
Heater elements on blower discharge
add 5.7 in. (145 mm) to depth on all models
Deck Mount
HeightDeck Mount
Deck Mount
56
CHILLED WATER AIR CONDITIONING
5
CHILLED WATER AIR CONDITIONING
e
fil
ro n
-P g
w esi
Lo D
ABL-HV Series Chilled Water Air Handlers
Ideal for Height-Restrictive Installations; High-Velocity Blowers
Key Benefits
The ABL-HV series of draw-through air handlers for chilled water systems is ideal for installation in
height-restrictive spaces. Insulating foam covers the condensate pan, blower housing, shroud, and
coil end cover to reduce noise and secondary condensation. The condensate pan also has an antislosh, anti-fungal foam lining. The ABL-HV series is designed to replace the CBLB models.
ABL-HV air handlers are an excellent choice for overhead applications where height is limited.
The dual high-velocity (HV) blowers are mounted at a 90 degree angle to the evaporator coil for
dramatically reduced depth. The optional cushioned mounts, which minimize vibration and noise,
allow the unit to be suspended from above or supported from beneath.
ABL-HV air handlers are constructed with corrosion-resistant materials. They feature "positiveflow" drain pans with anti-slosh foam lining and are fully insulated against secondary condensation.
Electric heat is optional.
ISO 9001:2008
L-2555
Rev. 20120622
■■
Dual blowers are mounted at 90-degree
angle to the coil for minimum depth
■■
Suspend from above or support from
beneath (suspension hardware sold
separately)
■■
Optional cushioned mounts reduce noise
and vibration
■■
Bypass valve has removable power head
for simple servicing
■■
Valve body is soldered to unit to prevent
leaks
■■
Exposed components are insulated
against secondary condensation
■■
Electrical box can be remotely mounted
up to 6 ft. (1.8 m)
■■
Remote air bleeder on 6 ft. (1.8 m) of
flexible tubing with ball valve
■■
Valve on left (standard) or on right
(optional)
■■
Optional flow control automatically
balances circulated water throughout the
system
■■
Optional Electric Heat
■■
Optional Breathe Easy™ microparticle
air filter
ABL18HV
18000
230
1.32
3
5
2
4.5/17.1
11.9/303
12.2/310
37.3/948
TBD
1/2
FPT
1/2
FPT
50/323
200/1291
ABL24HV
24000
230
1.4
3
5
2
6/22.8
11.9/303
12.2/310
46/1169
15/381
1/2
FPT
1/2
FPT
70/452
240/1549
L-2555
Rev. 20120622
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Environmentally
Responsible
Assembled in the USA
Max. Width
Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 All dimensions ± 0.30 in. (8 mm).
Model
Nominal Capacity (BTU/h)
Voltage @ 50/60Hz 1-Ph (V)
Full Load Amps (FLA) Cool (A)
Optional Electric Heat (kW)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Water Flow (gpm/lpm)
Height-Deck Mount (in/mm) (1)
Height-Suspension Mount (in/mm) (1)
Max. Width (in/mm) (1)
Max. Depth (in/mm) (1)
Drain Connection Size (in)
Drain Connection Type
Chilled Water Connection Size (in)
Chilled Water Connection Type
Min. Supply Air Grille Size (sq in/sq cm)
Min. Return Air Grille Size (sq in/sq cm)
Specifications for ABL-HV Series Chilled Water Air Handlers
Dealer
HeightDeck Mount
Max. Depth
HeightSuspension
Mount
58
CHILLED WATER AIR CONDITIONING
5
CHILLED WATER AIR CONDITIONING
oo
C y
er log
sp o
hi hn
W ec
T
ABL-DC Series Air Handlers
Whisper Quiet Units Ideal for Height-Restrictive Spaces
Key Benefits
The ABL-DC series of marine draw-through air handlers for chilled water systems is ideal for
installation in height-restrictive spaces. Insulating foam covers the condensate pan, blower
housing, shroud, and coil end cover to reduce noise and secondary condensation. The condensate
pan also has an anti-slosh, anti-fungal foam lining. The ABL-DC series is designed to replace the
CBLB models.
ABL air handlers are an excellent choice for overhead applications where height is limited.
The dual DC "WhisperCool" blowers are ultra quiet yet overcome high-static-pressure duct.
The blowers are mounted at a 90 degree angle to the evaporator coil for dramatically reduced
depth. The optional cushioned mounts, which minimize vibration and noise, allow the unit to be
suspended from above or supported from beneath.
ABL-DC air handlers are constructed with corrosion-resistant materials. They feature "positiveflow" drain pans with anti-slosh foam lining and are fully insulated against secondary condensation.
Electric heat is optional.
ISO 9001:2008
L-2561
Rev. 20120824
■■
DC "WhisperCool" blowers are extremely
quiet yet powerful enough to overcome
high-static-pressure duct
■■
Dual blowers are mounted at 90-degree
angle to the coil for minimum depth
■■
Suspend from above or support from
beneath (suspension hardware sold
separately)
■■
Optional cushioned mounts reduce noise
and vibration
■■
Bypass valve has removable power head
for simple servicing
■■
Valve body is soldered to unit to prevent
leaks
■■
Exposed components are insulated
against secondary condensation
■■
Electrical box can be remotely mounted
up to 6 ft. (1.8 m)
■■
Remote air bleeder on 6 ft. (1.8 m) of
flexible tubing with ball valve
■■
Valve on left (standard) or on right
(optional)
■■
Optional flow control automatically
balances circulated water throughout the
system
■■
Optional Electric Heat
■■
Optional Breathe Easy™ microparticle
air filter
ABL18DC
18000
230
6.4
6.4
3
13
10
8
4.5/17.1
600/1020
2.7/672.4
11.9/303
12.2/310
37.3/948
15.8/402
1/2
FPT
1/2
FPT
50/323
200/1291
ABL24DC
24000
230
6.4
6.4
3
13
10
8
6/22.8
800/1360
2.5/622.5
11.9/303
12.2/310
43.3/1100
15.8/402
1/2
FPT
1/2
FPT
70/452
240/1549
L-2561
Rev. 20120824
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Environmentally
Responsible
Width
Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 ‘Z’ indicates 230V. Add ‘-FC’ for optional flow control; add ‘-L’ for valve on the left relative to the blower side of the coil (right side is the default); add ‘#kW’ for amount of optional electric heat in
kilowatts.
2 All dimensions ± 0.30 in. (8 mm).
Model (1)
Nominal Capacity (BTU/h)
Voltage @ 50/60Hz 1-Ph (V)
Full Load Amps (FLA) Cool (A)
Full Load Amps (FLA) Blower (A)
Optional Electric Heat (kW)
Heater Amps (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Water Flow (gpm/lpm)
Air Flow (cfm/m3h)
External Static Pressure (inH2O/Pa)
Height-Deck Mount (in/mm) (2)
Height-Suspension Mount (in/mm) (2)
Max. Width (in/mm) (2)
Max. Depth (in/mm) (2)
Drain Connection Size (in)
Drain Connection Type
Chilled Water Connection Size (in)
Chilled Water Connection Type
Min. Supply Air Grille Size (sq in/sq cm)
Min. Return Air Grille Size (sq in/sq cm)
Specifications for ABL-DC Series Air Handlers
Assembled in the USA
Dealer
HeightDeck Mount
Depth
HeightSuspension
Mount
60
CHILLED WATER AIR CONDITIONING
6
CHILLED WATER AIR CONDITIONING
ATV-HV Series Slim-Profile Air Handlers
Designed With Depth Constraints In Mind
Key Benefits
ATV-HV chilled water air handlers were designed for applications where very little depth is
available. Showcasing a unique vertical layout, these air handlers have the coil low and the blower
above.
Featuring a slim profile, ATV-HV air handlers make previously unusable areas suitable for
installation. With a depth of only 9.4 in. (240 mm), these units can be hidden in side areas instead
of in places above or below, where most air handlers are installed. ATV-HV air handlers have a
high-velocity blower with internal motor that keeps overall unit depth to a minimum, resulting in
easier installation.
ATV-HV air handlers are available in two configurations: Low-profile (LP) and square (SQ). LP
models have a reduced height for installations where height, as well as depth, is restricted. SQ
models have a square blower assembly that allows 90° of blower rotation in the field.
ATV-HV air handlers are constructed with corrosion-resistant materials and have drain pans lined
with an anti-slosh, anti-fungal foam. Exposed metal surfaces are insulated against secondary
condensation. Options include a flow control valve that balances chilled water distribution
throughout the system, and electric heat.
The ATV's slim-profile design
is ideal for installation in walls
and other areas where depth
is limited.
ISO 9001:2008
L-2566
Rev. 20120824
■■
Unique vertical design results in
dramatically reduced depth
■■
Fits into walls and other tight spaces
■■
Exposed components are insulated
against secondary condensation
■■
High-velocity (HV) blower with internal
motor to reduce depth
■■
Low-profile models (ATV*HV-LP) have
a reduced height for tight installation
spaces
■■
Square models (ATV*HV-SQ) allow 90°
of blower rotation in the field
■■
Electrical box can be remotely mounted
up to 6 ft. (1.8 m)
■■
Drain pan has anti-slosh, anti-fungal foam
lining
■■
Optional flow control automatically
balances circulated water throughout the
system
■■
Optional electric heat
■■
Optional Breathe Easy™ microparticle
air filter
ATV18HV-LP
18000
115
2.3
2.3
3
26.1
5
3
4.5/17.1
485/825
0.3/74.7
25.4/646
27.8/707
21.2/539
6/153
8.9/227
1/2
FPT
1/2
FPT
7/178
100/646
200/1291
2
13
230
1.15
1.15
ATV24HV-LP
24000
115
2.3
2.3
3
26.1
5
3
6/22.8
709/1205
0.3/74.7
29.1/740
31.3/796
23.7/602
7.7/196
10.4/265
1/2
FPT
1/2
FPT
8/204
140/904
240/1549
L-2566
Rev. 20120824
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
TBD
13
230
1.64
1.64
Width
Environmentally
Responsible
Duct Ring
Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 ‘LP’ indicates low-profile configuration; replace with ‘SQ’ for square configuration.
2 All dimensions ± 0.30 in. (8 mm).
3 Heights listed are for ‘LP’ configurations.
Model (1)
Nominal Capacity - Cool (BTU/h)
Voltage @ 50/60Hz 1-Ph (V)
Full Load Amps (FLA) Cool (A)
Full Load Amps (FLA) Blower (A)
Optional Electric Heat (kW)
Heater Amps (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Water Flow (gpm/lpm)
Air Flow (cfm/m3h)
External Static Pressure (inH2O/Pa)
Min. Height (in/mm) (2)(3)
Max. Height (in/mm) (2)(3)
Max. Width (in/mm) (2)
Min. Depth (in/mm) (2)
Max. Depth (in/mm)
Drain Connection Size (in)
Drain Connection Type
Chilled Water Connection Size (in)
Chilled Water Connection Type
Min. Supply Duct Size (in/mm)
Min. Supply Air Grille Size (sq in/sq cm)
Min. Return Air Grille Size (sq in/sq cm)
Specifications for ATV-HV Series Slim-Profile Air Handlers
Assembled in the USA
Dealer
Min. Height
Min. Depth
Max. Height
62
CHILLED WATER AIR CONDITIONING
6
CHILLED WATER AIR CONDITIONING
oo
C y
er log
sp o
hi hn
W ec
T
ATV-DC Series Slim-Profile Air Handlers
Designed With Depth Constraints In Mind
Key Benefits
ATV-DC chilled water air handlers were designed for applications where very little depth is
available. Showcasing a unique vertical layout, these air handlers have the coil low and the blower
above.
Featuring a slim profile, ATV-DC air handlers make previously unusable areas suitable for
installation. With a depth of only 9.4 in. (240 mm), these units can be hidden in side areas instead
of in places above or below, where most air handlers are installed. ATV-DC air handlers have DC
"WhisperCool' blowers that are ultra quiet yet strong enough to overcome high-static-pressure duct.
The internal blower motor keeps overall unit depth to a minimum, resulting in easier installation.
ATV air handlers are available in two configurations: Low-profile (LP) and square (SQ). LP models
have a reduced height for installations where height, as well as depth, is restricted. SQ models
have a square blower assembly that allows 90° of blower rotation in the field.
ATV air handlers are constructed with corrosion-resistant materials and have drain pans lined
with an anti-slosh, anti-fungal foam. Exposed metal surfaces are insulated against secondary
condensation. Options include a flow control valve that balances chilled water distribution
throughout the system, and electric heat.
ISO 9001:2008
L-2563
Rev. 20130329
■■
DC "WhisperCool" blowers are extremely
quiet yet powerful enough to overcome
high-static-pressure duct
■■
Unique vertical design results in
dramatically reduced depth
■■
Fits into walls and other tight spaces
■■
Low-profile models (ATV*DC-LP) have
a reduced height for tight installation
spaces
■■
Square models (ATV*DC-SQ) allow 90°
of blower rotation in the field
■■
Exposed components are insulated
against secondary condensation
■■
Electrical box can be remotely mounted
up to 6 ft. (1.8 m)
■■
Optional flow control automatically
balances circulated water throughout the
system
■■
Optional electric heat
ATV6DC-LP
6000
230
1.4
1.4
1
4.3
10
7
1.5/5.7
290/493
0.3/74.7
20.2/514
22.9/582
20.3/516
4.1/105
7.5/191
1/2
FPT
1/2
FPT
5/127
35/226
70/452
ATV9DC-LP
9000
230
1.4
1.4
1.5
6.5
5
2
2.25/8.6
290/493
0.3/74.7
20.2/514
22.9/582
20.3/516
4.1/105
7.5/191
1/2
FPT
1/2
FPT
6/153
49/317
98/633
ATV12DC-LP
12000
230
3.2
3.2
1.5
6.5
5
4
3/11.4
421/716
2.1/522.9
20.6/524
24.1/613
20.3/516
4.2/107
9.4/239
1/2
FPT
1/2
FPT
6/153
70/452
130/839
ATV18DC-LP
18000
230
3.9
3.9
3
13
5
3
4.5/17.1
548/932
1.4/348.6
25.4/646
27.9/709
21.1/536
6/153
10.1/257
1/2
FPT
1/2
FPT
7/178
100/646
200/1291
ATV24DC-LP
24000
230
3.9
3.9
3
13
15
13
6/22.8
670/1139
0.3/74.7
27.7/704
29.9/760
23.7/602
7.7/196
10.8/275
1/2
FPT
1/2
FPT
8/204
140/904
240/1549
ATV36DC-LP
36000
230
3.9
3.9
3
13
5
5
9/34.1
670/1139
0.3/74.7
31.9/811
34.7/882
29.4/747
7.6/194
11.4/290
1/2
FPT
1
FPT
8/204
196/1265
360/2323
L-2563
Rev. 20130329
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Environmentally
Responsible
Max. Width
Duct Ring
Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 ‘Z’ indicates 230V. Add ‘-FC’ for optional flow control; add ‘-L’ for valve on the left relative to the blower side of the coil (right side is the default); add ‘#kW’ for amount of optional electric heat in
kilowatts.
2 Blower amps will be reduced at lower speed/cfm or higher static pressure. Amps listed are at free air.
3 All dimensions ± 0.30 in. (8 mm).
Model (1)
Nominal Capacity - Cool (BTU/h)
Voltage @ 50/60Hz 1-Ph (V)
Full Load Amps (FLA) Cool (A) (2)
Full Load Amps (FLA) Blower (A)
Optional Electric Heat (kW)
Heater Amps (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Water Flow (gpm/lpm)
Air Flow (cfm/m3h)
External Static Pressure (inH2O/Pa)
Min. Height (in/mm) (3)
Max. Height (in/mm) (3)
Max. Width (in/mm) (3)
Min. Depth (in/mm) (3)
Max. Depth (in/mm) (3)
Drain Connection Size (in)
Drain Connection Type
Chilled Water Connection Size (in)
Chilled Water Connection Type
Min. Supply Duct Size (in/mm)
Min. Supply Air Grille Size (sq in/sq cm)
Min. Return Air Grille Size (sq in/sq cm)
Specifications for ATV-DC Series Slim-Profile Air Handlers
Assembled in the USA
Dealer
Min. Height
Max. Depth
Min. Depth
Max. Height
64
CHILLED WATER AIR CONDITIONING
6
CHILLED WATER AIR CONDITIONING
EW
N
ATV "4-Pipe" Series Slim-Profile Air Handlers
Narrow Depth With Separate Boiler Connections
Key Benefits
The ATV is a chilled water air handler designed for applications where very little depth is available.
In the “4-pipe” configuration there are two separate sets of valves and heat exchangers for cooling
and for heating. Two pipes connect to the chiller system to provide cooling, and two pipes connect
to an auxiliary heat source, such as a boiler, to provide heating.
Tall and slim, ATV air handlers make previously unusable areas suitable for blower installation.
Showcasing a unique vertical layout, the ATV series has the coil low and the blower above.
Because of its minimal depth, it can be hidden in side areas instead of in places above or below,
where most air handlers go.
Designed for ducted applications, the ATV series is equipped with high-velocity (HV) blowers with
internal motors to reduce depth for more flexibility during installation. They are also available with
brushless “WhisperCool” DC blowers that are extremely quiet yet can overcome significant static
pressure in the ducting system.
ATV air handlers are constructed of corrosion-resistant materials and are fully insulated against
secondary condensation. The drain pan has an anti-slosh, anti-fungal foam lining. An optional flow
control is highly recommended to help distribute the flow of chilled water more efficiently.
The ATV's slim-profile design
is ideal for installation in walls
and other areas where depth
is limited.
ISO 9001:2008
L-3016
Rev. 20130215
■■
Unique vertical design results in
dramatically reduced depth
■■
Fits into walls and other tight spaces
■■
Dedicated circuits for chilled water
cooling and heating provided by an
auxiliary heat source such as a boiler
■■
Exposed components are insulated
against secondary condensation
■■
High-velocity (HV) blower with internal
motor to reduce depth
■■
Optional DC "WhisperCool" blowers are
extremely quiet yet powerful enough to
overcome high-static-pressure duct
■■
Drain pan has anti-slosh, anti-fungal foam
lining
■■
Electrical box can be remotely mounted
up to 6 ft. (1.8 m)
■■
Optional flow control automatically
balances circulated water throughout the
system
■■
Optional Breathe Easy™ microparticle
air filter
ATV9HV-4P-LP
9000
115
230
1.14
0.61
1.4
0.7
1
8.7
4.3
5
2
1
2.25/8.6
280/476
0.75/186.8
22.3/567
24.3/618
24.1/613
6.4/163
7.6/194
1/2
FPT
6/153
49/317
98/633
ATV12HV-4P-LP
12000
115
230
1.61
0.78
1.4
0.7
1
8.7
4.3
5
2
1
3/11.4
400/680
0.75/186.8
22.3/567
24.3/618
24.1/613
6.5/166
8.3/211
1/2
FPT
6/153
70/452
130/839
ATV18HV-4P-LP
18000
115
230
2.52
1.18
2.2
1
1.5
13
6.5
5
3
2
4.5/17.1
600/1020
0.75/186.8
26.2/666
28.2/717
24.9/633
7.6/194
8.9/227
1/2
FPT
7/178
100/646
200/1291
L-3016
Rev. 20130215
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
ATV24HV-4P-LP
24000
115
230
3.4
1.64
3.5
1
1.5
13
6.5
5
4
3
6/22.8
650/1105
0.75/186.8
29.4/747
31.4/798
26.3/669
9.4/239
11.2/285
1/2
FPT
8/204
140/904
240/1549
Environmentally
Responsible
Width
Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 All dimensions ± 0.30 in. (8 mm).
Model
Nominal Capacity - Cool (BTU/h)
Voltage @ 50/60Hz 1-Ph (V)
Full Load Amps (FLA) Cool (A)
Full Load Amps (FLA) Blower (A)
Optional Electric Heat (kW)
Heater Amps (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Water Flow (gpm/lpm)
Air Flow (cfm/m3h)
External Static Pressure (inH2O/Pa)
Min. Height (in/mm) (1)
Max. Height (in/mm) (1)
Max. Width (in/mm) (1)
Min. Depth (in/mm) (1)
Max. Depth (in/mm) (1)
Chilled Water Connection Size (in)
Chilled Water Connection Type
Min. Supply Duct Size (in/mm)
Min. Supply Air Grille Size (sq in/sq cm)
Min. Return Air Grille Size (sq in/sq cm)
Specifications for ATV “4-Pipe” Series Slim-Profile Air Handlers
Assembled in the USA
Max. Depth
Min. Depth
Dealer
Min. Height
Max. Height
66
CHILLED WATER AIR CONDITIONING
6
CHILLED WATER AIR CONDITIONING
AT-HV-MU Series Fresh Air Make-Up Air Handlers
Keep Air Inside the Vessel From Going Stale
Key Benefits
The AT series of fresh-air make-up air handlers (AT-HV-MU) for chilled water systems duct in
outside air, cool and dehumidify it, then re-heat it to room temperature and duct it to various interior
spaces. Typically, crew cabins and other spaces two or more levels below deck will benefit from
the use of these systems.
AT-HV-MU air handlers consist of a water coil, valve, electric heater, and high-velocity (HV) blower
mounted on a condensate pan/chassis with cushioned mounts to reduce noise and vibration.
The specially-designed water coil cools and dehumdifies outside air in one pass. The coil, as well
as the blower and all exposed sheet metal components, is coated to resist corrosion. A motorized
three-way bypass valve controls the flow of circulated water through the coil The HV blower has
a high-efficiency internal motor, and can be rotated as required for installation. Ultra-quiet DC
“WhisperCool” blowers are available. An electric heater with redundant over-temperature protection
reheats the cooled air to room temperature.
The sloped “positive-flow” condensate pan reduces standing water and is lined with anti-fungal
and anti-slosh foam. The blower, condensate pan, and other exposed areas are insulated against
secondary condensation. An optional modulating loop-water flow control regulates the water
through the unit to ensure proper water distribution to all air handlers.
ISO 9001:2008
L-2403
Rev. 20130607
■■
Compact design
■■
Corrosion-resistant coating on evaporator
coil, blower, and drain pan
■■
Patented
■■
Drain pan has anti-slosh, anti-fungal foam
lining
■■
High-velocity (HV) fully-insulated blowers
are rotatable
■■
Integrated three-way bypass valve with
easy-change power head
■■
Electric heat with two-stage electric heat
overload
■■
Heater assembly accessible from the top
or side
■■
Large coil shroud volume for optimal
performance
■■
Brass hose barb loop-water connections
■■
Electrical box can be remotely mounted
up to 6 ft. (1.8 m)
■■
Remote air bleeder on 6 ft. (1.8 m) of
flexible tubing with ball valve
■■
Built-in flow control balances chilled water
distribution
18000
230
0.9
7.5
0.9
1.5
10
8
4.5/17.1
174/296
0.72/179.3
15/381
20.3/516
12.3/313
1/2
FPT
1/2
FPT
5/127
100/646
37/16.8
41/18.6
Nominal Capacity (BTU/h)
Voltage @ 50/60Hz 1-Ph (V) (1)
Full Load Amps (FLA) Cool (A)
Full Load Amps (FLA) Heat (A)
Full Load Amps (FLA) Blower (A) (2)
Optional Electric Heat (kW)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Water Flow (gpm/lpm)
Air Flow (cfm/m3h)
External Static Pressure (inH2O/Pa)
Max. Height (in/mm) (3)
Max. Width (in/mm) (3)
Max. Depth (in/mm) (3)
Drain Connection Size (in)
Drain Connection Type
Chilled Water Connection Size (in)
Chilled Water Connection Type
Min. Supply Duct Size (in/mm)
Min. Return Air Grille Size (sq in/sq cm)
Net Weight (lbs/kg) (4)
Gross Weight (lbs/kg) (4)
24000
230
0.7
9.4
0.7
1
10
10
6/22.8
276/469
0.36/89.7
16.6/422
22.6/575
15.3/389
1/2
FPT
1/2
FPT
6/153
140/904
44/19.1
58/26.4
AT24HVZ-2X1KW-MU
L-2403
Rev. 20130607
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
AT36HVZ-FC-2X1.5KWMU
36000
230
1.6
14.7
1.6
1.5
20
16
9/34.1
550/935
0.75/186.8
19.5/496
26.6/676
18/458
1/2
FPT
1
FPT
8/204
220/1420
63.75/28.1
81.25/36.9
Environmentally
Responsible
Max. Depth
Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 Verify voltage! Units with SCR-based controls are designed for either 208VAC or 230VAC. Add “208” to the end of the model number for 208VAC units.
2 Electrical and blower data is based on 50Hz performance.
3 All dimensions ± 0.30 in. (8 mm).
4 All weights ± 10%
AT18HVZ-1.5KW-MU
Model
Specifications for AT-HV-MU Series Fresh Air Make-Up Air Handlers
Assembled in the USA
Max. Height
Dealer
Max. Width
68
CHILLED WATER AIR CONDITIONING
6
CHILLED WATER CONTROLS
EW
N
Smart Touch Chiller Control
Intuitive High-Resolution Display
Key Benefits
Easy Chiller Management
Managing a multi-stage chiller system has never been easier. The Smart Touch Chiller Control is
intuitive to use and provides clear indications of current status, operational trends, animated realtime monitoring of the refrigeration circuit, and more.
The high resolution display can be mounted in the chiller system’s electrical box or at a convenient
remote location, and is available in three screen sizes: 7 in. (178 mm), 10 in. (254 mm), or 13 in.
(331 mm).
Innovative Features
Increased analog inputs – Monitor important conditions such as water loop glycol level, and
utilize dynamic superheat control for improved performance.
■■ Condenser protection – Monitor differential pressure to protect from catastrophic failures by
adjusting the speed of the seawater pump to maintain constant pressure or adjust to proper
pressure and receive an alert about a potential problem.
■■ Alarm messaging – Receive text or email message in real time if a fault occurs (network
required).
■■ Load banking – Works with your generator to keep it running at a healthy and efficient 70-80%
operational load by turning on additional stages as required. Eliminates the need for a separate
load bank.
■■ Photographic confirmation – Future integration with room controls that will allow the user to
monitor room A/C performance.
■■ Data logger – Download Alarm Faults and Historical Trend Data onto a USB for analysis.
The Smart Touch Chiller Control works with any Cruisair or Marine Air chiller and can be retrofit to
replace an existing Dometic Digital Control (DDC) or Tempered Water Logic Control (TWLC).
■■
Quickly set chill water
temperature setpoint and
monitor water temperature.
ISO 9001:2008
Monitor the performance
of the electronic expansion
valve.
Review historical trend data,
and much more.
L-3233
Rev. 20140117
■■
High-resolution display
■■
Intuitive touch-screen operation
■■
Available in three screen sizes
■■
Networks to ship management controls
via Modbus, CAN Bus, Ethernet, or
BACnet
■■
Remote access through smart phone or
computer via internet
■■
Increased analog inputs for detailed
system monitoring
■■
Alarm messaging via text or email
■■
Load banking feature eliminates the need
for a separate load bank
■■
Tracks operational trends of system for
precise preventive maintenance
■■
For new chiller systems or replace
Dometic Marine DDCs and TWLCs
13 in. Display
10.5/267
13.27/337
1.65/42
10.1/256
12.83/326
10 in. Display
9.13/232
11.30/287
1.65/42
8.70/221
10.87/276
7 in. Display
5.79/147
7.36/187
1.77/45
5.35/136
6.93/176
L-3233
Rev. 20140117
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Environmentally
Responsible
Width
Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
Model
Height (in/mm)
Width (in/mm)
Depth (in/mm)
Cutout Height (in/mm)
Cutout Width (in/mm)
Dimensions for Optional Remote Smart Touch Display
Assembled in the USA
Height
Dealer
Depth
10-13 in.
Model
Depth
7 in.
Model
70
CHILLED WATER CONTROLS
7
CHILLED WATER CONTROLS
Tempered Water Logic Control
For Precise Staged Chiller Monitoring & Coordination
Key Benefits
The TWLC (Tempered Water Logic Control) is an advanced microprocessor chiller control
specifically designed for marine circulated water systems. The TWLC system maximizes
system performance, protects the chillers with advanced fault protection monitoring and shutdown routines, and has easy menu-driven operation supplying the user with important system
information.
System redundancy and easy field repair were the priorities when the TWLC was developed.
Each chiller in a TWLC system has a dedicated power/logic board, and the boards are networked
together to form an integrated system (automatically controlling up to 6 chillers). This design
means that a single board or network failure will not shut down the entire system. The P/L board
has board-mounted LEDs to help with troubleshooting, replaceable EPROM for software upgrades,
and plug-in terminal strips and RJ-12 jacks which allow for quick field installation.
Interaction with the system is through the TWLC keypad/display. A simple 4-button keypad is
used to change operation mode and to navigate through the menus to view and change system
parameters. A backlit LCD display supplies easy to read information about the system, including
water temperatures, operation mode, which chillers are running, and other detailed information.
Three small LEDs on the keypad clearly indicate Cool or Heat modes, and faults. An alarm buzzer
on the keypad can also signal a fault. Additional TWLC keypads can be installed to allow remote
system access.
Set up and operation of the TWLC is fully automatic. It senses how many units are connected and
programs the temperature staging and unit rotation of the units to pre-programmed parameters.
The TWLC board has non-volatile memory so settings and recorded information are not lost even
if power is interrupted. The large memory capacity allows the TWLC to record run time of the
compressors and pumps, and store the fault history of each unit.
The system monitors all the inputs and will display 12 different faults based on the information
received. Each fault has a specific routine that protects the unit while helping to prevent nuisance
faults. Some will generate a sustained shutdown, which must be reset from the TWLC keypad.
If a fault is sensed, the fault LED on the TWLC keypad will light (and the buzzer will sound, if
activated) and the specific fault will be displayed on the LCD screen. The fault signal output on the
P/L boards will also be powered.
Another feature of the TWLC is that it can be connected to an on-board computer or modem to
allow full remote access of the system. Custom software emulates the TWLC on the computer
screen and navigation through the menus is identical to the TWLC keypad/display. If a land
phone line is available, a modem can be connected and the system can be viewed and operated
remotely, allowing a knowledgeable service agent to troubleshoot the system anywhere in the
world.
ISO 9001:2008
L-2057
Rev. 20120824
■■
Provides central control for chillers with
up to six stages
■■
Optimizes compressor operation
■■
Displays water temperatures, compressor
run times, diagnostic faults, and more
■■
Interfaces with a PC via serial port for
remote control and monitoring (PC sold
separately)
■■
Keypad/display has four-button and fourline LCD
■■
Circuit breakers for compressors and
pumps
■■
Records and logs faults and run times
■■
Optional current transducers to monitor
compressor and pump amperage
■■
Optional seawater temperature sensors
■■
Optional refrigerant pressure transducers
■■
Optional loop water and seawater
pressure transducers
■■
Control over optional electric immersion
heat or fuel-fired boiler
■■
Optional remote unit shutdown for load
shedding
■■
Optional fault signal output for remote
alarm
Width
5.125 in.
(130 mm)
5.125 in.
(130 mm)
Height
Depth
L-2057
Rev. 20120824
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Environmentally
Responsible
Assembled in the USA
Dealer
The easy-to-use keypad/display (shown below( features a backlit LCD and supplies critical
system information, including faults.
TWLC Keypad/Display
■■
■■
Level 1 Upgrade Package – Adds current transducers for the compressors and pumps,
seawater out temperature sensors in each chiller, a common seawater inlet temperature
sensor, and the computer and modem adapters.
The Level 2 Upgrade Package – All Level 1 package features, plus high- and lowrefrigerant pressure transducers for each chiller, a seawater pressure transducer (to
install on the discharge of the seawater pump) and a loop water pressure transducer (to
install on the inlet of the loop water pump).
Spare Pump Switch – Selector switches can be added for backup (spare) pumps.
Multiple Power Inputs – Up to three power blocks can be installed to help divide the
chiller and pump loads.
■■ Auxiliary Water Heater – Breakers and contactors to control an auxiliary water heater
■■ Fault Output Relay – A set of “dry” contacts can be installed to operate an alarm on the
vessel’s monitoring system.
■■ Longer Wire Harness – Up to 30 ft. (9 m) is available; 10 ft. (3 m) is standard.
■■ Frame Mounted Panel – For mounting the TWLC on a framed chilled-water system.
■■ Load Shedding – Terminals to allow a load-shedding system to remotely shut down
individual chillers.
In addition to the options above, two TWLC upgrade packages are available:
■■
■■
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1.00 in.
(26 mm)
1.50 in.
(38 mm)
Dimensions
1 For six-stage electrical box dimensions, please contact a Dometic sales representative at 954-973-2477.
Depth (in/mm)
7.75/197
7.75/197
7.75/197
As each TWLC multi-panel is custom built, there are many options to consider:
Height (in/mm)
24.0/610
24.0/610
24.0/610
No. of Stages (1)
2 to 3
4
5
Width (in/mm)
22.0/560
30.0/760
35.0/890
TWLC Options
Specifications for Multi-Stage Chiller Control Box
72
CHILLED WATER CONTROLS
7
CABIN CONTROLS
e
id ble
-W a
ip ork
Sh tw
e
N
Q-Logic Cabin Control System
Microprocessor Control System With Choice of Displays
Key Benefits
Cruisair's Q-Logic microprocessor control system works with direct expansion evaporators and
tempered water air handlers. Q-Logic consists of a power/logic circuit board installed in the
electrical box of the evaporator or air handler, and is controlled by a Qht or Q3 keypad/display.
An optional CAN-bus network adapter is available for new Q-Logic systems and as a retrofit
for existing installations to provide ship-wide network monitoring and controlling of multiple DX
systems or air handlers. The CAN-bus adapter adheres to CAN-bus Standard 2.0B and is fully ISO
compliant. It is available in two CAN-bus communication protocols to support connection to several
popular helm and cabin touchscreen control systems.
The Qht control/display is European in style and accommodates an assortment of decorative
bezels — including a new model sized to fit the popular Vimar Eikon bezel. The Qht display
features raised buttons for easy access and control and an attractive blue backlit LCD.
The Q3 display is rectangular with a bezel look and LED display window. Designed as an
economical version of the Qht, the Q3 features a sturdy, smooth, black plastic case with attractive
white lettering, and raised buttons for easy access. Like the Qht, the Q3 was developed for userfriendly, logical operation. Both displays have three levels of brightness and a programmable sleep
mode in which the display dims automatically when not in use.
The Qht and Q3 also operate the auxiliary heat. If the optional water-temperature sensor is
installed, Q-Logic provides an automatic change-over function from cooling to heating.
A dehumidification mode operates the system on a timed basis so the boat stays ventilated and dry
even when no one is aboard (optional electric heat package recommended).
The Qht and Q3 are compatible only with Q-Logic boards and are not backward compatible with
Cruisair SMX II systems.
The Qht keypad/display now
accommodates the popular
Vimar Eikon bezel.
ISO 9001:2008
The Q3 keypad/display
features a built-in bezel and
simple four-button layout.
The Qht keypad/display
is available with a variety
of decorative bezels to
complement any interior
L-2642
Rev. 20130222
■■
Easier menu-based programming
■■
Smarter error/fault codes
■■
Timed setting for air filter replacement
■■
Automatic dehumidification
■■
Optional humidity sensor to monitor and
control relative humidity
■■
Optional electric heat package
■■
Optional outside temperature sensor
■■
Easier maintenance with separate offboard compressor triac
■■
Inside temperature sensor and display
cable identical to SMX platform
■■
Optional CAN bus adapter puts cabin
control on the ship-wide network
■■
Qht supports Vimar Idea, Vimar Eikon,
and Gewiss Playbus bezels
■■
Q3 features a small surface-mount
display with simple four-button interface
115/230
50/60
2.53/65
3.5/89
0.75/20
N/A
N/A
1
N/A
2.84
N/A
N/A
0.34/9
1.31/34
Voltage (V)
Cycle (Hz)
Height-Display (in/mm)
Width-Display (in/mm)
Depth-Display (in/mm)
Panel Cut-Out Height (in/mm)
Panel Cut-Out Width (in/mm)
Cutout Hole Diameter (in)
Height-Between Mounting Holes (in/mm)
Width-Between Mounting Holes (in)
Height-Bezel (in/mm) (1)
Width-Bezel (in/mm)
A-to Centerline (in/mm)
B-to Centerline (in/mm)
Qht Keypad/Display
(Vimar Idea or Gewiss
Playbus Bezel)
115/230
50/60
2.81/72
4.39/112
0.75/20
2.13/55
3.44/88
N/A
2.2/56
3.78
3.27/84
4.84/123
N/A
N/A
115/230
50/60
2.53/65
3.5/89
0.75/20
N/A
N/A
1
N/A
2.84
N/A
N/A
0.34/9
1.31/34
Q3 Keypad/Display for
Direct Expansion
L-2642
Rev. 20130222
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
115/230
50/60
2.87/73
4.64/118
0.77/20
1.875/48
2.75/70
N/A
2.2/56
3.78
4.72/120
3.35/86
N/A
N/A
Qht Keypad/Display
(Vimar Eikon Bezel)
HeightDisplay
Width-Between
Mounting Holes
QHT VIMAR
EIKON BEZEL
Environmentally
Responsible
HeightBetween
Mounting
Holes
Panel CutOut Width
Width-Bezel
Width-Display
Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 Bezels sold separately; dimensions may vary depending on style.
Q3 Keypad/Display for
Tempered Water
Model
Specifications for Q-Logic Cabin Control System
Panel
Cut-Out
Height
Dealer
HeightBezel
DepthDisplay
QHT DISPLAY SIDE VIEW
(NO BEZEL)
HeightBetween
Mounting
Holes
Width-Between
Mounting Holes
QHT VIMAR IDEA &
GEWISS PLAYBUS BEZELS
Panel Cut-Out Width
Panel
Cut-Out
Height
74
CABIN CONTROLS
7
CABIN CONTROLS
SMX Cabin Control Systems
Advanced, Microprocessor-Based Climate Control
Key Benefits
Cruisair offers two SMX microprocessor control systems for use with direct expansion (DX) air
conditioning systems. SMXII offers all the standard operational and safety features required for
most DX systems. SMX Net adds networking capability and other special features that make it
unique in the industry. Either system can be retrofitted in the field to replace an electromechanical
switch assembly.
The SMXir keypad/display and optional remote is used with both systems.
Both systems feature easy operation. Dehumidification mode can be used to operate the system
on a timed basis so that the boat will stay ventilated and dry even when no one is aboard.
Line voltage and refrigerant high and low pressure switches are constantly monitored and if a
problem is detected, the system will shut down and display a fault on the display.
Many of the factory settings can be changed to allow the user to fine-tune the system to best match
the boat and personal preferences. A nonvolatile memory retains current operation mode and all
programmable settings when power is turned off or lost, such as when changing from generator
to dock power. The programmable compressor time delay function will prevent multiple units from
starting at the same time when power is restored.
SMX Net allows multiple units to be networked together for central control. Each unit in the network
has a unique ID number, and any unit can be accessed and controlled from any other control in
the network. SMX Net also permits one unit to be “slaved” to another so that only one keypad
can be used to control multiple units in a large cabin. Additional SMX Net features include outside
temperature display, auxiliary (electric) heat control, two-speed fan control, and an optional SMX
Net Convenience Panel, from which the entire network can be easily accessed and controlled with
a single keystroke to go into one of four programmed modes.
The convenient remote
control for SMXII and SMX
Net systems is effective up to
25 ft. (7.6 m).
ISO 9001:2008
L-2088
Rev. 20130531
■■
Automatic or manual fan-speed selection
■■
Automatic dehumidification
■■
Inside temperature display
■■
Outside temperature display (SMX Net
only)
■■
Nonvolatile memory retains custom
settings in the event of power loss
■■
Automatic shutdown for low-pressure,
high-pressure, and low-voltage faults
■■
Fault code display
■■
Brightness control
■■
Auxiliary heat control (SMX Net only)
■■
SMX Net only features: Software update
capability, remote control, slaving
capability, auxiliary heat control
■■
Optional remote control for SMXir
keypad/display
■■
Optional two-speed fan (SMX Net only)
■■
Optional convenience panel
■■
SMX II programmable functions:
Fahrenheit/Celsius display, low- and highspeed fan adjustment, compressor time
delay, compressor response differential,
fan response differential, continuous/
intermittent fan, line voltage calibration,
temperature sensing calibration, factory
memory reset, dehumidification cycle
parameters
4-1/8 in.
105 mm
FRONT
7/8 in.
22 mm
SIDE
2-7/16 in.
62 mm
1-3/4 in.
44 mm
MOUNTING PLATE
L-2088
Rev. 20130531
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
The SMXir keypad/display can be used with either SMX II or SMX Net control systems. A complete system
consists of a power/logic module (either SMX II or SMX Net), an SMXir keypad/display, CXP connecting
cable and a TSEP temperature sensor. Additional components will be needed to network multiple SMX
Net units, including: CNP network cables, one TSEP outside temperature sensor, and the optional SMXir
Convenience Panel (the convenience panel kit includes a SMXir keypad/display connected to a SMXir
Convenience Panel).
Specifically designed for the marine environment, the SMXir features a plastic housing, sealed membrane
keypad, and electronics with anticorrosion coating. Housings are available in black or white, and with either
a 3/4 or full coverage door.
The SMXir keypad/display has an attractive, compact housing with easy surface-mount installation. A large,
easy-to-read LED shows cabin temperature, set point, programming prompts, and fault code warnings,
and small LEDs and backlit text indicate system status. Under a decorative hinged door is the familiar SMX
10-button arrangement with clearly labeled keys for single-keystroke operation. An optional infrared remote
control is available that allows system adjustments to be made remotely.
About the SMXir Keypad/Display
4-11/16 in.
119 mm
Dimensions
Dealer
76
CABIN CONTROLS
7
CABIN CONTROLS
SMXht Keypad/Display
Cabin Control for DX & Tempered Water Systems
Key Benefits
The SMXht is a digital keypad/display that is used with Cruisair's SMX II-HV power/logic controller
board. The SMXht can be used with both DX evaporating units and tempered water air handlers.
It can be retrofitted to SMXII-type systems in the field. The SMXht is dual voltage (115 and 230V)
and operates at 50 or 60Hz. It functions identically to the Cruisair SMXir keypad/display but is
easier to program and operate.
A complete climate control system consists of the SMXht keypad/display, SMX II-HV power/logic
board, CXP cable and a TSEP temperature sensor.
The SMXht is available in gray or white and has a sleek, modern European design. Two popular
decorative snap-on bezels, Vimar® Idea or Gewiss® Playbus, are available (sold separately). The
Gewiss bezel snaps directly onto the display; the Vimar bezel requires the use of two “wings”
(included) to snap onto the display. The keypad/display features raised buttons and a blue backlit
LCD. The LCD has three levels of brightness or a programmable sleep mode in which the display
is darkened automatically. With these new features, programming and operation is simple and
easy. Installation is also uncomplicated; see the back of this sheet for a detailed diagram.
Normal operation consists of simply turning the system on by pressing the Power button and
adjusting the desired cabin temperature set point. Fan speed can be controlled automatically or
manually. Operation modes are cool, heat, auto switchover (automatically switches from cool to
heat Mode), and dehumidification. Dehumidification can be used to operate the system on a timed
basis so that the boat will stay ventilated and dry even when no one is aboard. Aux (electric) heat
mode is available for tempered water systems.
The SMXht will display a fault code in the event of a line voltage or refrigerant low or high pressure
problem.
Many of the factory settings can be changed to allow the user to fine-tune the system to best match
the boat and personal preferences.. A nonvolatile memory retains current operation mode and all
programmable settings when power is turned off or lost, such as when changing from generator
to dock power. The programmable compressor time delay function will prevent multiple units from
starting at the same time when power is restored.
ISO 9001:2008
L-2376
Rev. 20130531
■■
Attractive, modern styling
■■
Accommodates Vimar Idea and Gewiss
Playbus decorative bezels
■■
Backlight and sleep modes
■■
Automatic dehumidification
■■
Supports auxiliary heat for tempered
water systems
■■
Complete system monitoring
■■
Pressure switch testing
■■
Low-voltage protection
Height:
2-1/8 in.
54 mm
3-47/64 in.
95 mm
Width:
3-7/16 in.
88 mm
CUTOUT & MOUNTING HOLES
4-27/32 in.
124 mm
Backlight mode
Select DX or TW power/logic board
Fahrenheit/Celsius display
DX compressor time delay
Fan response differential
Low- and high-fan speed
AC line voltage calibration
Temperature calibration
HU dehumidification
High- to low-speed adjustment
Software upgrades
LED segment test
4-25/64 in.
112 mm
REAR VIEW
2-13/16 in.
72 mm
L-2376
Rev. 20130531
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
3/4 in.
19 mm
SIDE VIEW
(NO BEZEL)
Programmable Functions
2-3/64 in.
52 mm
3-17/64 in.
83 mm
FRONT VIEW (VIMAR IDEA BEZEL)
Dimensions
Dealer
78
CABIN CONTROLS
7
CABIN CONTROLS
SMXIIAB Keypad/Display
For Use With SMX II Microprocessor Control System
Key Benefits
The SMXIIAB keypad/display works with Cruisair's SMX II microprocessor controller system for
direct expansion air conditioning. The SMXIIAB features a non-corrosive ABS cover and softmembrane switches and can be retrofitted in the field to replace any electromechanical switch
assembly.
All keys are clearly labeled, making operation simple. The large, easy-to-read digital display shows
setpoint or cabin temperature and also is used to give information on operating parameters and
fault code warnings. Small LEDs are used to indicate system status. Switchplates, which are
available in black, brown, white or beige, must be ordered separately.
For normal operation, it is only necessary to turn the system on and select the desired setpoint.
The user can select cooling only, heating only, or automatic changeover between cooling and
heating. Fan speed is automatically controlled, or can be manually set.
Factory settings may be changed, with user-programmable commands, permitting the boat owner
to fine-tune the system for personal preferences. Programming modes are accessed by pressing
special combinations of keys. Nonvolatile memory retains all user-programmed settings, even
when the power is off.
The SMX II system constantly monitors line voltage and refrigerant pressures. Whenever out-oftolerance conditions are sensed, the system will display a visual warning on the SMXIIAB display
and shut the system down to prevent damage. Dehumidification mode ensures the boat stays dry
– eliminating mold, mildew and odor – even when no one is aboard.
For more information about the SMX II microprocessor system, please refer to specification sheet
L-2088.
ISO 9001:2008
L-0488
Rev. 20130531
■■
Works with SMX II microprocessor control
system
■■
More than 20 programmable functions
■■
Easy plug-in installation
■■
Automatic monitoring of pressure and
voltages
■■
Clearly labeled buttons
■■
Non-metallic switchplate with soft
membrane switches
■■
Automatic or manual fan-speed selection
■■
Automatic dehumidification
■■
Switchplates available in black, brown,
white, or beige
AC line voltage calibration
Temperature calibration
Compressor restart time delay
Continuous or intermittent fan operation
Low and high fan-speed adjustment
Compressor response differential
Fahrenheit or Celsius temperature display
5 ft. (1.52 m) length
10 ft. (3.05 m) length
15 ft. (4.57 m) length
20 ft. (6.10 m) length
30 ft. (9.14 m) length
40 ft. (12.19 m) length
60 ft. (18.29 m) length
80 ft. (24.38 m) length
2 ft. (0.61 m) length
5 ft. (1.52 m) length
10 ft. (3.05 m) length
15 ft. (4.57 m) length
20 ft. (6.10 m) length
30 ft. (9.14 m) length
40 ft. (12.13 m) length
60 ft. (18.29 m) length
80 ft. (24.38 m) length
Switchplate in black
Switchplate in brown
Switchplate in white
Switchplate in beige
Description
L-0488
Rev. 20130531
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
■■
■■
■■
■■
■■
■■
■■
Programmable Functions:
1 Temperature sensors are included on Cruisair Stowaway air conditioning units (SXUF models).
Model
Switchplates
PXB
PXN
PXW
PXG
Temperature Sensors (1)
TSEP2
TSEP5
TSEP10
TSEP15
TSEP20
TSEP30
TSEP40
TSEP60
TSEP80
Connecting Cables
CX5
CX10
CX15
CX20
CX30
CX40
CX60
CX80
Accessories for SMXIIAB Keypad/Display
Dealer
80
CABIN CONTROLS
8
CABIN CONTROLS
Electromechanical Rotary Switch Controls
Reliable Control Over Basic Air Conditioner Functions
Key Benefits
Electro-mechanical rotary-knob switch assemblies provide conventional control over basic air
conditioning functions. Both 115V and 230V switches are available. The standard design is an
aluminum plate covered with a modern black plastic overlay with text and graphical representations
of the various functions. Many different configurations are available:
Standard three-knob assemblies provide function selection (OFF-FAN-RUN), fan speed control,
and a room thermostat with 10 ft. (3 m) capillary tube. For chilled water systems, a special
thermostat on the air handler allows automatic changeover between heating and cooling modes.
A two-knob control for chilled water systems features function control (OFF-FAN-RUN) and fan
speed control. It is used with a remote thermostat, or in situations where a thermostat is not
needed, such as in an engine room or on a makeup air handling unit with a bypass valve.
Single-knob switch assemblies control fan speed (either variable or two-speed) and offer two
operational modes: In the ON position, the fan will run continuously; in the AUTO position, the fan
will cycle on and off with the compressor.
A four-knob assembly is available for direct expansion systems, allowing control of an auxiliary
electric heater. Functions are: system mode (OFF – FAN – RUN), heat mode (Reverse Cycle or
Aux. Heat), thermostat, and fan speed.
Switches are also available for use with auxiliary heat modules, but an HRX type heat relay may be
needed in certain cases.
ISO 9001:2008
L-0243
Rev. 20120824
■■
115V and 230V models
■■
For use with variable or two-speed
blowers
■■
Auxiliary heat controls available
■■
Two wiring connections available: Colorcoded terminal strip and six-pin plug
■■
Black plates with modern graphics
■■
Vertical and horizontal configurations
SA4-BB SA4-ZB
Width
3/77
3/77
Height
3.13/80
3.13/80
3.5/89
2.88/74
7.25/185
2-KNOB
3.5/89
2.88/74
7.25/185
5.13/131
5.13/131
3.5/89
2.88/74
7.25/185
3.5/89
2.88/74
3.5/89
2.88/74
7.25/185
Plug
230
60
3-knob
Variable
1-KNOB
7.25/185
230
60
3-knob
Variable
Term. Strip Term. Strip Term. Strip Term. Strip Term. Strip
115
60
3-knob
Variable
Term. Strip
115
60
3-knob
2-Speed
230
60
2-knob
Variable
L-0243
Rev. 20120824
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
3.5/89
2.88/74
7.25/185
3.5/89
2.88/74
7.25/185
230
60
3-knob
Variable
TSE-TZCB SSA
115
60
4-knob
Variable
Term.
Strip
SA5-ZB10
3.5/89
2.88/74
Environmentally
Responsible
3.5/89
2.88/74
7.82/199 7.82/199
230
60
4-knob
Variable
Term.
Term. Strip Term. Strip
Strip
115
60
3-knob
Variable
TSE-TZB
Specifications and availability subject to change without notice.
3.5/89
2.88/74
7.25/185
Plug
115
60
3-knob
Variable
SA3-ZB10 SA3-ZCB10 SSA3-ZCB SSA3-ZB
115
60
2-knob
Variable
SA3BCB10
230
60
3-knob
2-Speed
SA4A-ZCB SA3-BB10
SA4A-ZB
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
Depth
3-KNOB MECHANICAL CONTROL
Dimensions
Model
SA4ZCB
Voltage (V)
115
115
230
Cycle (Hz)
60
60
60
Type of Switch
1-knob 1-knob 1-knob
Fan-Speed Control 2-Speed Variable Variable
Term.
Term.
Term.
Type of Connection
Strip
Strip
Strip
Height-Display
3.75/96 3.75/96 3.75/96
(in/mm)
Width-Display (in/
2.88/74 2.88/74 2.88/74
mm)
Depth-Display (in/
2.25/58 2.25/58 2.25/58
mm)
Specifications for Electromechanical Rotary Switch Controls
Dealer
82
CABIN CONTROLS
8
AIR CONDITIONING ACCESSORIES
Accessories for DX Modulating Air Conditioning
Controls & Refrigerant Distributors
Key Benefits
Each cooling unit (or evaporating unit) in a modulating system requires its own control. There are
two options: The SMX II microprocessor system or three-knob electromechanical switch assembly.
The SMX II microprocessor control system consists of a PLHMX-HV power/logic module, SMXir
keypad/display (one for each evaporating unit), CXP cable, and a TSEP temperature sensor.
The PLHMX-HV power/logic module includes a 3 ft (0.9 m) wire harness that connects to the
evaporating unit's junction box. The CXP cable, available in many different lengths, connects the
SMXir keypad/display to the PLHMX-HV. The TSEP temperature sensor, also available in different
lengths, plugs into the PLHMX-HV. The TSEP's sensor bulb is installed in the return air path.
The SMXir keypad/display has an attractive, compact housing available in black or white. The
display includes a mounting plate for easy surface-mount installation. A large, easy-to-read LED
shows cabin temperature, set point, programming prompts, and fault code warnings. Small LEDs
and backlit text indicate system status. Under a decorative hinged door is the membrane-sealed
SMX 10-button keypad with clearly labeled keys for single-keystroke operation. Internal electronics
have an anti-corrosion coating. An optional infrared remote control is available. For more
information about the SMXir keypad/display, including dimensions, please refer to specification
sheet L-2088.
The three-knob electromechanical switch assembly is available in two varieties: The SA1 for
cooling only systems, and the MS5 for units with electric heat. Knobs control mode, fan speed, and
a thermostat. These controls come with a 10 ft. (3 m) capillary tube, 3 ft. (0.9 m) wire harness, and
color-coded terminal strip. For more information, please refer to specification sheet L-0243.
Electromechanical controls
with rotary switches are
available for Cruisair DX
modulating units.
ISO 9001:2008
L-0956
Rev. 20130531
■■
SMX II features: Automatic or manual
fan-speed control, inside temperature
display, auxiliary heat control, auto
dehumidification, nonvolatile memory,
fault display, brightness control
■■
SMX II programmable functions:
Fahrenheit/Celsius display, low- and highspeed fan adjustment, compressor time
delay, compressor response differential,
fan response differential, continuous/
intermittent fan, line voltage calibration,
temperature sensing calibration, factory
memory reset, dehumidification cycle
parameters
■■
Optional remote control for SMXir
keypad/display
■■
3-knob electromechanical control
features: Knobs for mode, fan speed, and
thermostat, available with electric heat
control (MS5 model)
DD4
7.5/191
4.5/114
0.38/10
0.25/7
SD8-6
9.0/229
7.0/178
0.75/19
0.50/13
A
Connections ‘A’ and ‘B’ are
male flares.
B
L-0956
Rev. 20130531
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
Length
Width
The DD4 discharge distributor has a 3/8 in. male flare inlet connection, and five 1/4 in. male flare outlets.
The SD8-6 suction distributor has a 3/4 in. male flare inlet and five 1/2 in. flare outlets. Flare nuts are
provided, as are flare sealing caps if less than five units are connected. The flare nuts on the suction
distributor are 3/8 in. reducing nuts that will allow 3/8 in. copper tube to be connected to the 1/2 in. flare
fittings. If a 1/2 in. tube is to be connected, a standard 1/2 in. flare nut will be required.
Cruisair offers five-way distributors to split refrigerant lines from the condensing unit to multiple evaporating
units, providing equal refrigerant flow to each. For best results, the distributor should be located so that
the tubing running to each evaporating unit is close to equal in length. Depending on the installation, the
installer may prefer to use multiple "Tee" fittings instead.
1 All dimensions correspond to the illustration below.
Model (1)
Length
Width
A
B
Refrigerant Distributor Dimensions
Dealer
84
AIR CONDITIONING ACCESSORIES
8
AIR CONDITIONING ACCESSORIES
n r
EX tio ne
IB va in
no W
In ard
Aw
Breathe Easy™ In-Duct Air Purifiers
Stops Odors & Improves Air Quality
Key Benefits
Reduce the odors of tobacco smoke, mildew, mustiness, chemical vapors and toilets, and inhale
fresher, cleaner, healthier air on-board. The Breathe Easy™ In-Duct Air Purifier uses innovative
Photocatalytic Nano-Mesh technology with ultraviolet (UV) light to improve your boat's air quality.
The UV bulb inside uses a specific frequency of light that produces no harmful ozone.
The Breathe Easy nano-mesh is a three-dimensional foam structure coated with titanium-dioxide
(TiO2) and provides 2200% more contact surface area than simple screen structures found in
competing air purifiers. This is a significant advantage, as photocatalytic air purification occurs only
when airborne contaminants contact the photocatalytic surface.
In addition, the TiO2 catalyst is restructured at the molecular level to have an increased number of
contact surfaces. This formation puts 70% larger molecules on the contact surface and dramatically
improves reactivity with contaminants.
■■
Eliminates unpleasant odors
■■
Uses an intense ultraviolet (UV) light that
produces no harmful ozone
■■
Enhances air quality
■■
Cleaner air may lessen allergy and
asthma symptoms
■■
Silent operation
■■
Up to 98% reduction in diesel fumes,
acetone, benzene, formaldehyde, and
other VOCs
■■
Up to 99.9% reduction in bacteria, fungi,
mold, and pollen
■■
Photocatalytic nano-mesh structure is
safe and powerful
■■
Photocatalytic nano-mesh structure will
not degrade under UV light
■■
UV bulb is easy to replace
■■
Sizes for common duct diameters
■■
Will not significantly decrease air flow
velocity
Product Testimonial
"I live onboard when we travel and always
had problems with congestion and sinus
drainage, but have not had a problem with
that since we put the Breathe Easy on the
boat. I’m very pleased with the product."
—— Gray Ingram, Sportfishing Tournament
Champion, Owner of Big Oh
"The crew had consistent problems with
sore throats and coughs. So we’ve gone to
Dometic. We discovered the air…went from
being almost heavy and saturated to being a
lot lighter. It was easier to breathe…cleaner.
It’s fantastic."
—— James Rose-Innes, First Mate, 95 ft.
Motor Yacht, Ft. Lauderdale, FL
How Breathe Easy Works:
1.Biological contaminants like VOCs, mold spores, bacteria, and viruses pass through the air
conditioning duct and into the air purifier system.
2.UV light energy activates the titanium-dioxide catalyst on the surface of the nano-mesh
structure. The molecules of pollutants and odors that come in contact with the catalytic nanomesh structure are reconfigured into non-toxic elements. Vortex action maximizes air contact
with the catalytic surface.
3.Significantly cleaner, healthier air exits the photocatalytic air purifier.
ISO 9001:2008
L-2701
Rev. 20131011
Diameter
Width
4 IN. DIAMETER
6000
115/220/230
200
350
200
200
12
4.5/115
5.25/134
10.5/267
4.5/115
5 IN. DIAMETER
7000 - 8000
115/220/230
200
350
200
200
12
5.5/140
6.5/166
10.5/267
5.5/140
6 IN. DIAMETER
10000 - 12000
115/220/230
200
350
200
200
12
6.5/166
7.5/191
10.5/267
6.5/166
7 IN. DIAMETER
14000 - 16000
115/220/230
200
350
200
200
20
7.5/191
8.5/216
13.5/343
7.5/191
L-2701
Rev. 20131011
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
8 IN. DIAMETER
24000
115/220/230
200
350
200
200
20
8.5/216
9.5/242
13.5/343
8.5/216
Competitor’s Screen
Environmentally
Responsible
Assembled in the USA
Dealer
Testing of the Breathe Easy In-Duct Air Purifier performed by Environmental Diagnostics
Laboratory showed up to 98% reduction in volatile organic compounds (VOCs) and up to
99.9% reduction in bacteria, fungi, mold, and pollen grains.
Laboratory Test Results
TiO2 is found in many common products, such as pigments, processed foods, toothpaste,
and costmetics. It is harmless to people, animals, and the environment.
Safe and Effective Catalyst
A single ultraviolet (UV) bulb with dual tubes provides greater intensity and service
coverage to activate more of the catalyst for high-performance results.
Dometic’s Photocatalytic
Nano-Mesh Structure
A three-dimensional Photocatalytic nano-mesh structure coated with titanium-dioxide
(TiO2) provides greater surface area for maximum destruction of airborne contaminants.
The nano-mesh structure creates very little static pressure, so there is no significant
reduction in air flow velocity. In addition, the nano-mesh structure does not have to be
cleaned or replaced.
UV Lamps
■■
■■
Photocatalytic Nano-Mesh Technology
Breathe Easy Competitive Advantages
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
Height
Dimensions
1 All dimensions ± 0.30 in. (8 mm).
Model
Air Conditioner Capacity (BTU/h)
Voltages @ 50/60Hz (V)
Milliamps @ 115VAC/60Hz (mA)
Milliamps @ 220VAC/50Hz (mA)
Milliamps @ 230VAC/60Hz (mA)
Milliamps @ 12VDC (mA)
UV Bulb Watts (kW)
Min. Duct Diameter (in/mm)
Height (in/mm) (1)
Width (in/mm) (1)
Depth (in/mm) (1)
Specifications for Breathe Easy™ In-Duct Air Purifiers
86
AIR CONDITIONING ACCESSORIES
8
AIR CONDITIONING ACCESSORIES
n
E
M s io
A d t
D ar en
Aw al M
i
ec
Sp
Breathe Easy™ Portable Air Purifier
Stops Odors & Improves Air Quality
Key Benefits
Breathe Easy Portable Air Purifier and AC adapter with worldwide plugs and 12V power plug (inset)
Reduce the odors of tobacco smoke, mildew, mustiness, chemical vapors, and toilets, and inhale
fresher, cleaner, healthier air virtually anywhere you go. Effective in areas up to 500 sq. ft. (46 sq.
m), the Breathe Easy™ Portable Air Purifier uses innovative Photocatalytic Nano-Mesh technology
with ultraviolet (UV) light to improve air quality. The UV bulb inside uses a specific frequency of
light that produces no harmful ozone. The unit operates quietly and has two fan-speed settings. A
worldwide AC adapter with plugs is included, as well as a 12V DC power plug.
The Breathe Easy nano-mesh is a three-dimensional foam structure coated with titanium-dioxide
(TiO2) and provides 2200% more contact surface area than simple screen structures found in
competing air purifiers. This is a significant advantage, as photocatalytic air purification occurs only
when airborne contaminants contact the photocatalytic surface. In addition, the TiO2 catalyst is
restructured at the molecular level to have an increased number of contact surfaces. This formation
puts 70% larger molecules on the contact surface and dramatically improves reactivity with
contaminants.
™
■■
Eliminates unpleasant odors
■■
Uses an intense ultraviolet (UV) light that
produces no harmful ozone
■■
Enhances air quality
■■
Cleaner air may lessen allergy and
asthma symptoms
■■
Quiet operation with two fan speeds
■■
Up to 96% reduction in diesel fumes,
acetone, benzene, formaldehyde, and
other VOCs
■■
Up to 99% reduction in bacteria, fungi,
mold, and pollen
■■
Photocatalytic nano-mesh structure is
safe and powerful
■■
Photocatalytic nano-mesh structure will
not degrade under UV light
■■
UV bulb is easy to replace
■■
Effective in areas up to 500 sq. ft. (46
sq. m)
■■
Worldwide AC power adapter with plugs
and 12V DC power plug included
Product Testimonial
"While changing the fuel filter there was a
minor diesel spill that permeated the boat.
We discovered the Breathe Easy unit and
it made all the difference in the world. No
more smell and everybody could breathe
easy!"
—— Nancy Gates-Lee, Boat Owner, Boca
Raton, FL
How Breathe Easy Works:
1.Volatile Organic Compounds (VOCs) and biological contaminants enter the air purifier system.
2.UV light energy activates the titanium-dioxide catalyst on the surface of the nano-mesh
structure. The molecules of pollutants and odors that come in contact with the catalytic nanomesh structure are reconfigured into non-toxic elements.
3.Significantly cleaner, healthier air exits the photocatalytic air purifier.
ISO 9001:2008
L-2712
Rev. 20131213
Height
Depth
Portable Air Purifier
4210805
500
300
200
275
500
5
1.75/45
6.25/159
4.5/115
L-2712
Rev. 20131213
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Dometic’s Photocatalytic
Nano-Mesh Structure
Environmentally
Responsible
Dealer
Testing of the Breathe Easy Portable Air Purifier performed by Environmental Diagnostics
Laboratory showed up to 96% reduction in volatile organic compounds (VOCs) and up to
99% reduction in bacteria, fungi, mold, and pollen grains.
Laboratory Test Results
TiO2 is found in many common products, such as pigments, processed foods, toothpaste,
and costmetics. It is harmless to people, animals, and the environment.
Competitor’s Screen
A three-dimensional Photocatalytic nano-mesh structure coated with titanium-dioxide
(TiO2) provides greater surface area for maximum destruction of airborne contaminants.
The nano-mesh structure creates very little static pressure, so there is no significant
reduction in air flow velocity.
Nano-mesh structure does not have to be cleaned or replaced.
Safe and Effective Catalyst
■■
■■
■■
Photocatalytic Nano-Mesh Technology
Breathe Easy™ Competitive Advantages
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
Width
Dimensions
1 Replacement UV bulbs available (P/N 4210804)
Model (1)
Part Number (P/N)
Max. Effective Area (sq ft)
Milliamps @ 115VAC/60Hz (mA)
Milliamps @ 220VAC/50Hz (mA)
Milliamps @ 230VAC/60Hz (mA)
Milliamps @ 12VDC (mA)
UV Bulb Watts (kW)
Height (in/mm)
Width (in/mm)
Depth (in/mm)
Specifications for Breathe Easy™ Portable Air Purifier
88
AIR CONDITIONING ACCESSORIES
8
AIR CONDITIONING ACCESSORIES
R
ed
at
v
er
M
7
Breathe Easy™ Microparticle Air Filters
7X More Effective Than Ordinary A/C Filters
Key Benefits
Enjoy cleaner, healthier air quality on your boat with Breathe Easy™ microparticle, anti-allergenic
air filters for your air conditioning system. Breath Easy microparticle air filters are rated Merv 7,
making them seven times more effective than ordinary air filters.
Breathe Easy microparticle air filters are efficient and disposable, and are available for most
Dometic air conditioning systems. Installation takes only seconds using the existing brackets on
either side of the evaporator face. Special pins are included to hold the air filter in place on units
which do not have these brackets.
Because Breathe Easy microparticle air filters are highly efficient in removing impurities, they
should be changed at frequent intervals to maintain air quality. Dometic recommends changing the
filter once every two months when living aboard, once every four months when the air conditioner
is used three weekends per month, and once every six months when the air conditioner is used
only one or two times per month.
Complete installation and replacement instructions are provided in the air filter packaging.
Breathe Easy microparticle
air filters are easy to
remove...
ISO 9001:2008
...and install.
L-2698
Rev. 20130621
■■
Rated Merv 7 - 7X more effective at
capturing airborne microparticles than
ordinary foam and mesh filters
■■
Capture fumes, odors, dust, lint, and pet
dander
■■
Electrostatically-charged fibers attract
and retain microparticles that pass
through the filter
■■
Easy installation for all types and models
of Marine Air air conditioning systems
■■
Custom sizes available
Fits Marine Air A/C
Models
VCD5K/1, VCP5K, VCM5K,
SXF5, SXF5-1, SHF5, SHF5-1,
VCM5K/1, CLM5KC,
ZF5, ZF5-1
CLM5KC/1
VCD7K/1, VCP7K, VCM7K,
SXF7, SXF7-1, SHF7, SHF7VCM7K/
1, SXR7-1, SHR7-1, SXR10,
1, CMCD7K/1, CMCM7K,
SHR10, SXR12, SHR12
CMCM7K/1
SXR7, SHR7 (old style 7K),
CD3.5, SVCM3.5, CLM3.5
ZF3.5
VCD10K/1, VCM10K/1, CLMSXF10-1, SHF10-1, ZF10-1 10KC/1, CMCD10K/1,
CMCM10K/
VCP10K, VCM10K, CLM10KC,
SXF10, SHF10, ZF10, ZF12 CLM12KC, CMCP10K,
CMCM10K
VCD12K/1, VCM12K/1, CLMSXF12-1, SHF12-1, SXF16- 12KC/1, CMCD12K/1,
1, SHF16-1, ZF12-1, SXR16, CMCM12K/
1, VCD16K/1, VCM16K/1,
SHR16, ZF16-1, STX14,
STX16,
CLM16KC/1, CMCD16K/1,
STQ14, STQ16, STH14, STH16 CMCM16K/1, VTD14, VTD16,
VTM14, VTM16
VCP12K, VCM12K, VCP16K,
SXF12, SHF12, SXF16, SHF16,
VCM16K, VCD18, CLM16KC,
SXF18, SHF18, ZF16
CMCP16K, CMCM16K
SXF24, SXF24-1, SHF24,
VCD24K/1, VCP24K, VCM24K,
SHF24-1 (special order)
VCM24K/1 (special order)
SX24, SH24 (special order) N/A
STX6, STX8, STQ6, STQ8,
VTD6, VTD8, VTM6, VTM8
STH6, STH8
STX10, STX12, STQ10, STQ12, VTD10, VTD12, VTM10,
STH10, STH12
VTM12
N/A
N/A
N/A
N/A
Fits Cruisair A/C Models
10-7/8 x 12
ECM15, ECD15
ECD6
ECD10, ECD16
N/A
N/A
N/A
7-7/8 x 9
10-7/8 x 12
10-7/8 x 11-1/2
8-7/8 x 10-1/4
15-1/8 x 17
16-3/8 x 16
10-7/8 x 12
ECM11, ECD11
N/A
11-7/8 x 10
10-7/8 x 10
8-1/8 x 8
N/A
ECM9, ECD9
N/A
9-3/8 x 10
7-7/8 x 9
ECM5, ECD5
ECM6.5, ECD6.5
Width x Height (in)
Fits Dometic A/C Models
200 x 229
276 x 305
276 x 293
226 x 261
384 x 432
416 x 406
302 x 305
276 x 305
302 x 254
276 x 254
206 x 203
238 x 254
200 x 229
Width x Height (mm)
L-2698
Rev. 20130621
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Environmentally
Responsible
EVAPORATOR
Width
Dimensions
Height
Dealer
Locate the data plate on the air conditioning unit to find its model number, then use the
table above to match the model number to the correct filter P/N. If the model number is
not listed above, measure the unit's evaporator face and find the filter P/N in the table with
matching dimensions.
Decide What Size You Need
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 Please pay close attention to AC models 10, 12, and 16, and whether or not they have the suffice “-1” or “/1” in the model number. Additionally, unit filters for all 5-16K models with the suffix “-1” and
“/1” unit filters are interchangeable with “-2” and “/2” units.
235000700
235000703
235000639
235000638
235000608
235000607
235000606
235000605
235000604
23500060
23500060
23500060
235000600
Filter P/N (1)
Technical Specifications for Breathe Easy™ Microparticle Filters
90
AIR CONDITIONING ACCESSORIES
9
AIR CONDITIONING ACCESSORIES
e p
uc m
ed A
R tup 5%
6
ar y
St b
SmartStart™ Soft Starter
Eliminate Boat Air Conditioning Start-Up Spikes
Key Benefits
■■
Reduces strain on the power source
■■
Reduces brown-out effects at compressor
start-up
■■
May enable an inverter to power the air
conditioner
■■
May eliminate the need to upgrade the
generator
■■
Inexpensive, small, and lightweight
Product Testimonial
The SmartStart is a unique device that smooths out startup power demand of the boat air
conditioner's compressor instead of spiking it, reducing amp requirements by up to 65%. The
technology uses dynamic feedback control to reduce the inrush of current by starting the
compressor motor slowly. No other soft starter in the industry provides better performance.
™
Once running, an air conditioning compressor has a much lower, steady amp draw, but the initial
locked-rotor amps needed to start the system can create high current surges that could adversely
affect the operation of an overstrained power source.
In some situations, this gentler method of handling the power surge can mean the difference
between keeping the generator you have or investing thousands of dollars in a larger generator.
For boats without a generator, the SmartStart™ may allow the option of powering an air conditioning
system from an inverter.
When running on dock power, a SmartStart™ may resolve issues where the power source or
connection may be weak.
Not only does the SmartStart™ ease strain on the power source, it’s also less stressful for the
compressor itself since it starts more gently. Additionally, it provides valuable protection by shutting
down the compressor if the power source or the connection to the compressor is briefly interrupted,
then it reattempts a soft start after a three-minute delay.
All this power comes in a surprisingly small package. At only 5 x 3 x 2 in. (127 x 76 x 51 mm),
the SmartStart™ takes up little space and weighs only 15 oz. (0.43 kg.). The SmartStart™ is wired
directly into the air-conditioning system’s electrical box.
SmartStart reduces compressor startup power demand by up to 65%.
100
90
100
Amps
80
70
60
Up to 65%
Reduction in
compressor
startup
demand with
SmartStart
50
40
30
35
Amps
20
10
0
Compressor current
when starting
ISO 9001:2008
Compressor current
when starting
with SmartStart
L-2700
Rev. 20120824
"The generator’s control circuit would trip
and stop the generator due to the inrush
of the Emiko’s heat pump. The SmartStart
reduced that inrush of current so the
generator would continue to run.
We started with an inrush of 77 amps and
finished with an inrush of only 20 amps.
[The SmartStart] is a great solution to our
problem."
—— Mr. John Poole, Poole Refrigeration
Service, Alameda, CA, M/V Emiko (37 ft.
Nordic Tug)
4220040
115 V/50 Hz/60 Hz
5000/1259.1 - 18000/4535.1
1.94 in./
50 mm
2.94 in./75 mm
4220043
208 V/240 V/50 Hz/60 Hz
12000/3023.1 - 30000/7559.9
4220044
208 V/240 V/50 Hz/60 Hz
36000/9071.9 - 60000/15119.8
L-2700
Rev. 20120824
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
GND
L2/N
L1
Control electric box or circuit board with contactor,
relay, or triac that switches power to the compressor
Run capacitor
Contactor, relay or triac
BLACK #16
Environmentally
Responsible
Assembled in the USA
Model #4220045 (pictured below)
Dealer
PROVIDED WIRES & LOOM
ORANGE or PINK
Make run winding connection inside
electric box with butt splice provided.
WHITE or WHITE/RED
BLACK or PURPLE
GREEN
Optional SmartStart Mounting Tray
AC Input Power
115-240V/50-60Hz
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
5.25 in./134 mm
Dimensions
1 Typical start surge reduction as compared to compressor locked rotor amperage (LRA) is 65%
Model (1)
Min. Volts/Max. Volts/Cycle
Supported Comp. Capacity (BTU/h/kcal/h - BTU/h/kcal/h)
BROWN #12
Wiring Diagram
ORANGE #16
WHITE #12
Specifications for SmartStart™ Soft Starter
Compressor
92
AIR CONDITIONING ACCESSORIES
9
AIR CONDITIONING ACCESSORIES
EW
N
WhisperFan Controller
Silences Noisy AC-Driven Blower Motors
Key Benefits
The WhisperFan Controller eliminates the noise generated by AC-driven blower motors at low
fan speed settings. In addition, it provides overload protection to the blower motor and lets you
precisely control the actual fan speed for each fan-speed setting (e.g. High, Medium, Low).
This electrical device uses pulse width modulation to make any AC-driven fan as quiet as a DCdriven fan. Simply install it in line between the electrical box and the blower. By pulsing the voltage
hundreds of times faster than is possible with triacs, the smoother motor current results in quieter,
extreme low-noise output across all fan speeds.
The WhisperFan Controller also provides more versatile fan-speed control. Want a more noticeable
difference between your fan’s medium speed and its high speed? The WhisperFan’s two-button
keypad allows you or an installer to specify the exact speed for all your fan speed settings. Further
fine tuning can be done later from your cabin control’s keypad (e.g. Cruisair Qht or Marine Air
Systems Elite).
The WhisperFan works with all Cruisair and Marine Air cabin controls (Q-Logic, Passport, and
SMXII) and with any AC blowers on either chilled water or direct expansion air conditioning
systems.
The WhisperFan Controller is an easy and economical solution for an existing blower installation
that may be too noisy. It’s also great for anyone who wants to make precise adjustments to the
fan-speed settings.
The WhisperFan Controller works with blowers up to 3 amps. WhisperFan can only support a
single blower, so you must use one per fan.
The WhisperFan Control
two-button keypad allows
the boat owner or installer to
adjust fan speed settings.
ISO 9001:2008
L-3000
Rev. 20130823
■■
Eliminates blower motor noise associated
with low fan speeds
■■
Makes AC-driven blowers as quiet as DCdriven blowers
■■
User-programmable fan speeds
■■
Provides overload protection to blower
motor
■■
Easy and economical solution to noisy
fans
■■
Works with all Cruisair and Marine Air
cabin controls
■■
Compatible with blowers up to three
amps
■■
Supports blowers that are 115VAC/60Hz
and 208-240VAC/50 or 60Hz
■■
Support for 115VAC/60Hz blower motors
will be available soon
■■
CE approved
Height
Width
WhisperFan Control-115V
3.19/82
5.5/140
6.19/158
WhisperFan Control-230V
3.19/82
5.5/140
6.19/158
L-3000
Rev. 20130823
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
These bursts hit the
blower motor, resulting
in mechanical noise like
humming and vibration
Blower Motor
Dealer
The WhisperFan Controller, installed between
the digital control and blower motor, uses
pulse width modulation (PWM) to pulse the
voltage hundreds of times faster than is
possible with triacs, resulting in a smoother
stream of electrical current to the motor.
WhisperFan
Controller
Electrical pulses hit
the fan at a more
rapid rate, eliminating
mechanical noise
Typical blower motor operation WITH the WhisperFan Controller AT LOW FAN SPEEDS
When a low fan speed is selected,
a triac in the digital control “chops”
the smooth, continuous AC current
into short electrical bursts.
AC input
power
Digital Control
Typical blower motor operation AT LOW FAN SPEEDS (without the WhisperFan Control)
How the WhisperFan Control Works
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
Depth
Dimensions
Model
Height-Display (in/mm)
Width-Display (in/mm)
Depth-Display (in/mm)
Specifications for WhisperFan Controller
94
AIR CONDITIONING ACCESSORIES
9
AIR CONDITIONING ACCESSORIES
March Marine Seawater Pumps
Ultra-Durable Centrifugal Seawater Pumps
Key Benefits
Clockwise from left: Air-cooled AC-5CP-MD and liquid-cooled LC-5CP-MD, LC-3CP-MD, and LC-2CP-MD
March Marine centrifugal pumps are an excellent choice for providing seawater circulation
for marine air conditioning systems. The proven magnetic drive eliminates the troublesome
mechanical shaft seal.
There is no seal wear, power-robbing friction, or leakage through the seal. The impeller and drive
magnets are strong, permanent ceramic types, which prevent slippage, ensuring that full motor
power is converted into pumping power.
Centrifugal pumps require a flooded inlet and should be mounted below the waterline. “LC” models
have liquid-cooled motors and can be run in open air or submerged. “AC” models have air-cooled,
open drip-proof motors and must be in a dry environment.
Replacement parts for March pumps are available through Dometic.
Liquid-cooled models
(clockwise from top): LC5CP-MD, LC-3CP-MD, and
LC-2CP-MD
ISO 9001:2008
Air-cooled model AC-5CPMD
L-2263
Rev. 20130913
■■
Magnetic-drive impeller means no seal to
wear, leak, or repair
■■
Efficient motor with low power
consumption
■■
Exclusive marine-grade base
■■
115V and 230V models
■■
Liquid-cooled (submersible) and aircooled motors available
■■
All components in contact with water are
plastic, ceramic, or stainless steel
■■
6 ft. (1.8 m) power cord is standard
■■
1-year warranty on parts
LC-2CP-MD
115
1
5
13/3.1
yes
1/35
TE/SUB
3/4
1/4
5/2.3
A-507P
230
0.53
LC-3CP-MD
115
2
8.5
19/5.8
yes
1/20
TE/SUB
3/4
1/2
9/4.1
A-508P
230
1
LC-5CP-MD
115
2.2
14.5
27/8.3
yes
1/8
TE/SUB
1
1/2
15.5/7.1
A-506LC
230
1.1
AC-5C-MD
115
2.1
17
27/8.3
no
1/8
OD
1
1/2
10/4.6
A-506
L-2263
Rev. 20130913
Specifications and availability subject to change without notice.
Environmentally
Responsible
Dealer
8 10 12 14 16
G.P.M.
Assembled in the USA
6
D
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
-MD
2CP
4
LC-
2
CP-M
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
2/0.6
4/1.2
6/1.8
LC-3
8/2.4
-MD
10/3.0
-5C
12/3.7
14/4.3
16/4.9
18/5.5
20/6.1
22/6.7
24/7.3
26/7.9
D
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
230
1
LC
7.35/3.4
TBD
220
C-M
-5
AC
1 TE/SUB motors are totally enclosed liquid-cooled types and can be operated in the open air or submerged; OD motors are open, drip-proof and air-cooled types which must be kept dry.
Model
Voltage @ 50/60Hz 1-Ph (V)
Amps (A)
Max. Flow (gpm)
Max. Head (ft/m)
Ignition Protection
Motor HP (hp)
Motor Type (1)
Inlet Connection (in)
Outlet Connection (in)
Net Weight (lbs/kg)
Wet End Assembly
Performance Curve
Head (feet/meters)
Specifications for March Marine Seawater Pumps
96
AIR CONDITIONING ACCESSORIES
9
AIR CONDITIONING ACCESSORIES
Heavy-Duty Seawater Pumps
Centrifugal Pumps for Submersible Or Self-Priming Applications
Key Benefits
Cruisair specifies reliable, heavy-duty centrifugal pumps to provide a steady flow of cooling water
through the air conditioning system.
The glass reinforced polypropylene head pumps have magnetic drive impellers, and are available
with submersible or air cooled motors. Larger pumps have bronze heads with mechanical seals,
and air cooled, drip-proof motors. A wide range of pumps and motors are available for use in
different power environments.
Centrifugal pumps must be mounted below the water line. Self-priming pumps are also available for
above water line applications. A scoop type through-hull and a seawater strainer are recommended
for proper operation.
When more than one air conditioning unit is served by a single pump, a separate pump relay is
used. To complete the installation, Cruisair can also supply water manifolds, hose, and fittings.
ISO 9001:2008
L-0242
Rev. 20131122
■■
High-capacity centrifugal pumps
■■
250 to 10,800 GPH capacities
■■
115V and 230V/60Hz, 240V/50Hz, and
220/440V 3-phase models
■■
Seawater-grade construction with glassfilled polypropylene or bronze pump
heads
■■
Water-cooled (submersible) or air-cooled
motors
■■
High-head pressure models available
■■
Self-priming pumps available
■■
Meet or exceed applicable ABYC and US
Coast Guard regulations, CE directives,
and general Air Conditioning and
Refrigeration (ARI) standards
Voltage (V)
115
230
115
230
220
115
230
220
115
230
115
115
115
115
230
115
115
115
115
115
230
115
230
230
115
230
115
230
230
230
115
230
380
115
230
Cycle (2)
60 Hz
50 Hz/60 Hz
60 Hz
50 Hz/60 Hz
50 Hz
60 Hz
50 Hz/60 Hz
50 Hz
60 Hz
50 Hz/60 Hz
50 Hz/60 Hz
50 Hz/60 Hz
50 Hz/60 Hz
50 Hz/60 Hz
50 Hz/60 Hz
50 Hz/60 Hz
50 Hz/60 Hz
50 Hz/60 Hz
50 Hz/60 Hz
50 Hz/60 Hz
50 Hz/60 Hz
50 Hz/60 Hz
50 Hz/60 Hz
50 Hz/60 Hz
50 Hz/60 Hz
50 Hz/60 Hz
50 Hz/60 Hz
50 Hz/60 Hz
50 Hz/60 Hz
50 Hz/60 Hz
50 Hz/60 Hz
50 Hz/60 Hz
50 Hz
50 Hz/60 Hz
50 Hz/60 Hz
Phase (Ph)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
1
1
1
1
3
1
1
3
1
3
1
3
1
3
1
3
3
1
1
Amps (A)
1
0.5
2.5
1
1
2.1
1
0.9
2.2
1.2
10.4
10.4
10.4
7
3.4
7
7.2
10.6
13.8
3.4
2.6
13.8
6
3.4
11.2
2.8
14.2
3.8
6.4
5
15
3.4
5.4
14.2
5.2
Water Flow (gpm/lpm)
3/11.4
3/11.4
6/22.8
6/22.8
6/22.8
7.5/28.4
7.5/28.4
5/18.1
12/45.5
12/45.5
20/75.8
20/75.8
22/83.3
25/94.7
25/94.7
30/113.6
37/140.1
50/189.3
50/189.3
50/189.3
50/189.3
50/189.3
50/189.3
50/189.3
70/264.1
70/264.1
70/264.1
70/264.1
70/264.1
90/340.7
130/492.2
130/492.2
175/662.5
180/681.4
180/681.4
L-0242
Rev. 20131122
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Dealer
Outlet Connection (in)
1/4
1/4
1/2
1/2
1/2
3/8
3/8
3/8
3/8
3/8
1
1
3/4
1
1
1
1
1
1
1
1
1
1
11/2
11/2
11/2
11/2
11/2
11/2
2
21/2
21/2
21/2
21/2
21/2
Assembled in the USA
Inlet Connection (in)
3/4
3/4
3/4
3/4
3/4
3/8
3/8
3/8
3/8
3/8
1
1
3/4
11/4
11/4
11/4
11/4
11/4
11/2
11/4
11/4
11/2
11/4
11/2
11/2
11/2
11/2
11/2
11/2
2
21/2
21/2
21/2
21/2
21/2
Environmentally
Responsible
Feet of Head (ft/m)
7/2.2
7/2.2
14/4.3
14/4.3
9.5/2.9
14/4.3
14/4.3
11/3.4
14/4.3
14/4.3
5/1.6
5/1.6
5/1.6
7/2.2
15/4.6
15/4.6
15/4.6
7/2.2
30/9.2
20/6.1
20/6.1
30/9.2
20/6.1
20/6.1
20/6.1
20/6.1
30/9.2
30/9.2
28/8.6
45/13.8
18/5.5
18/5.5
20/6.1
20/6.1
20/6.1
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 For information about pumps larger than P711, please call the applications department at 954-973-2477.
2 50/60Hz pumps may be operated at 50Hz and reduced voltages but with a 17% reduction in flow and as much as a 30% drop in head; 60Hz only pumps may not be operated at 50Hz.
Model (1)
PML250
PML250C
PML500
PML500C
PML500CK
PMA500
PMA500C
PMA500CK
PMA1000
PMA1000C
P1200BXT
P1200BXT-SP
P1500BXT
PS1500BX
PS1500B3X
PS1800BX
PS2200BX
P3000BXT
PH3000BX-SP
PH3000BXT
PS3000B3X
PH3000BX-SP
PS3000BX
PH3000B3X-SP
P3600BX
P3600B3X
PH4000BX
PH4000B3X
P4800BX-SP
PH5400B3X
P7800BX
P7800B3X
P10500B3X
P10800BX
P10800B3X
Specifications for Heavy-Duty Seawater Pumps
Height (in/mm)
4.7/120
4.7/120
5.6/143
5.6/143
5.6/143
5/127
5/127
5/127
6.25/159
6.25/159
6.6/168
6.6/168
6.6/168
8.1/206
8.1/206
8.1/206
8.1/206
6.6/168
9.8/249
6.6/168
8.1/206
9.8/249
9/229
9.8/249
9.4/239
9.4/239
9.4/239
9.4/239
11.5/293
9.75/248
10/254
10/254
10/254
10/254
10/254
Width (in/mm)
5.6/143
5.6/143
5.6/143
5.6/143
5.6/143
4/102
4/102
4/102
4.5/115
4.5/115
6.5/166
6.5/166
6.5/166
6.5/166
6.5/166
6.5/166
6.5/166
6.5/166
8.5/216
6.5/166
6.5/166
8.5/216
9.75/248
8.5/216
6.5/166
6.5/166
6.5/166
6.5/166
8.5/216
8.5/216
8.5/216
8.5/216
8.5/216
8.5/216
8.5/216
Depth (in/mm)
6.2/158
6.2/158
7.4/188
7.4/188
7.4/188
9/229
9/229
9/229
9.1/232
9.1/232
13.6/346
13.6/346
13.6/346
13/331
15.4/392
13/331
13/331
14.2/361
18.7/475
14.2/361
15.4/392
18.7/475
14.5/369
18.7/475
14.5/369
14.5/369
15.8/402
15.8/402
21.5/547
16/407
17.6/448
17.6/448
18/458
18/458
18/458
98
AIR CONDITIONING ACCESSORIES
9
AIR CONDITIONING ACCESSORIES
Centrifugal Circulating Water Pumps
For Use In Tempered Water Air Conditioning Systems
Key Benefits
Cruisair specifies reliable, heavy-duty water pumps for use in circulated water air conditioning
systems. All pumps are centrifugal, with bronze and stainless components.
Pumps are available with 115/230V single-phase, or 230/460 3-phase, dual voltage motors. Most
are rated for 50/60 Hz use, but special 50 Hz only pumps are also available for full performance.
Circulation pumps are sized for the total loop capacity. Cruisair design specification is 3 gpm (11.4
lpm) per 12,000 Btu/hr capacity, rated at 40' (12.2 meters) head. Seawater pumps are selected for
the tempering unit capacity, at 250 gph (15.8 lpm) per 12,000 Btu/hr.
Self-priming seawater pumps are available for installations where the pump cannot be mounted
below the water line, or if air is able to enter the system such as on a sailboat or high speed craft.
Pump relays are used to control each pump. The circulation pump must run whenever the system
is cooling or heating, and the seawater pump is typically cycled with the tempering units.
Single-phase pumps have internal overload protection. An external overload relay should be used
with 3-phase pumps.
ISO 9001:2008
L-0420
Rev. 20130104
■■
High-capacity centrifugal pumps
■■
Seawater-grade construction with glassfilled polypropylene or bronze pump
heads
■■
Single-phase 115/230V or three-phase
230/460V dual voltage
■■
50 or 60Hz models
■■
Rated at 40 ft. (12.2 m) of head
■■
Meet or exceed applicable ABYC and US
Coast Guard regulations, CE directives,
and general Air Conditioning and
Refrigeration (ARI) standards
CPOD120BX
120000
115
50
60
1
14
11/2
11/2
9.4/239
6.5/166
14.5/369
CPOD80BX
80000
115
50
60
1
8
11/4
1
6.5/166
6.5/166
12.8/326
9.4/239
6.5/166
15.6/397
11/2
CPOD120BXK
120000
380
50
N/A
3
14
11/2
9.4/239
6.5/166
14.5/369
11/2
CPOD120B3X
120000
115
50
60
1
2.8
11/2
9.4/239
6.5/166
15.6/397
11/2
CPOD120B3XK
120000
380
50
N/A
3
5.2
11/2
9.4/239
6.5/166
15.8/402
11/2
CPOD180BX
180000
115
50
60
1
14
11/2
L-0420
Rev. 20130104
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
9.4/239
6.5/166
15.6/397
11/2
CPOD180BXK
180000
380
50
N/A
3
14.2
11/2
9.4/239
6.5/166
15.6/397
11/2
CPOD180B3XK
180000
380
50
N/A
3
7
11/2
8.6/219
10/254
15.9/404
11/2
CPOD240BX
240000
115
50
60
1
16
2
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 For information about pumps larger than P711, please call the applications department at 954-973-2477.
2 Determined using an average of 3 GPM per ton (12,000 BTU/hr) of air conditioning at given GPM and head, and are rated for direct expansion (DX) systems only.
3 ‘N/A’ indicates a dual voltage pump. Please contact Dometic Marine sales at 954-973-2477 for specific amperage based on your voltage requirements.
Model (1)
Capacity (BTU/h) (2)
Voltage (V)
Cycle 1 (Hz)
Cycle 2 (Hz)
Phase (Ph)
Amps (A) (3)
Chilled Water Inlet Connection (in)
Chilled Water Discharge Connection
(in)
Height (in/mm)
Width (in/mm) (1)
Depth (in/mm)
Specifications for Centrifugal Circulating Water Pumps
Environmentally
Responsible
8.6/219
10/254
15.9/404
11/2
CPOD240B3X
240000
115
50
60
1
4
2
Assembled in the USA
8.6/219
10/254
15.9/404
11/2
CPOD240B3XK
240000
380
50
N/A
3
2.2
2
Dealer
8.6/219
11/280
16.1/409
1
CPOD360B3XK
360000
230
50
N/A
3
N/A
2
10/254
11/280
18/458
1
CPOD500BX
500000
115
50
60
1
19.2
21/2
10/254
11/280
18/458
1
CPOD500B3X
500000
230
60
60
3
7
21/2
TBD
TBD
TBD
1
21/2
CPOD500BX/M-306
500000
115
50
60
1
10/254
11/280
18/458
1
CPOD800B3X
800000
230
50
60
3
9.6
21/2
100
AIR CONDITIONING ACCESSORIES
1
AIR CONDITIONING ACCESSORIES
Pump Relays for DX Air Conditioning
For Coordination of a Single Pump Serving Multiple Condensers
Key Benefits
Pump relays are used to control cycling of seawater pumps when more than one condensing unit is
supported by a single pump. One control trigger is needed for each condensing unit.
The PR8X is a solid-state relay which supports up to eight systems. Control triggers, matched to
the system control voltage, are ordered separately and added at the time of installation. Trigger
circuits for both 115V and 230V systems may be installed in the same PR8X box. The PR8X is
ignition protected.
The PR3X type relay is ordered with two or three pre-installed control triggers which are matched
to the system voltage. The PR3X-2 can be upgraded from two to three triggers in the field. Models
can be ordered for 115 or 230V control voltage and can control 115V or 230V pumps. The unit is
ignition protected.
The PR4D pump relays handle up to four control triggers which are ordered separately and added
at the time of installation. The PR4D is used to control 230V 3-phase pumps.
ISO 9001:2008
L-0373
Rev. 20130517
■■
Ignition protected
■■
Up to eight control triggers
■■
115V and 230V models
■■
15A fuse on pump circuit
PR3X-2
115
1
115/230
25
2.38/61
7.94/202
5.5/140
4/1.9
PR3X-2C
230
1
115/230
25
2.38/61
7.94/202
5.5/140
4/1.9
PR3X-3
115
1
115/230
25
2.38/61
7.94/202
5.5/140
4/1.9
PR3X-3C
230
1
115/230
25
2.38/61
7.94/202
5.5/140
4/1.9
PR8X
115
1
115/230
25
5.25/134
10.5/267
7/178
4/1.9
PR8X-4
115
1
115/230
25
5.25/134
10.5/267
7/178
4/1.9
PR8X-4C
230
1
115/230
25
5.25/134
10.5/267
7/178
4/1.9
PR8X-5C
230
1
115/230
25
5.25/134
10.5/267
7/178
3/1.4
L-0373
Rev. 20130517
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
PR8X-6C
230
1
115/230
25
5.25/134
10.5/267
7/178
4/1.9
PR8X-7C
230
1
115/230
25
5.25/134
10.5/267
7/178
4/1.9
Height
Environmentally
Responsible
Depth
Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 TR115 and TR230 control triggers are ordered separately depending on the application.
Model
Control Voltage (V) (1)
Phase (Ph)
Pump Voltage (V)
Max. Circuit Breaker (A)
Height (in/mm)
Width (in/mm)
Depth (in/mm)
Gross Weight (lbs/kg)
Specifications for Pump Relays for DX Air Conditioning
Assembled in the USA
Mounting Holes
Typ. (4) Places
Cover Screws
Typ. (2) Places
Dealer
TOP
Width
Wire Knockouts
102
AIR CONDITIONING ACCESSORIES
1
AIR CONDITIONING ACCESSORIES
Pump Packages for Chilled Water Systems
Convenient Solutions for Simpler Chiller Installations
Key Benefits
Pump packages reduce the installation time of chilled water systems by combining several
necessary components in one convenient package. The packages include a chilled-water pump,
expansion tank, pump drain pan, dual-scale (psi/kPa) pressure gauge, and fill assembly. The fill
assembly includes a hose connection, ball valve, and pressure-reducing valve.
The cushion of air in the expansion tank allows the water to expand and contract with temperature
fluctuations. This relieves pressure that might otherwise result in leaks.
The latest design includes a bladder-style expansion tank. Without the bladder, air in the expansion
tank would gradually dissolve into the water and be bled off. Eventually, the protective cushion of
air would be gone.
The pressure gauge is connected to an inlet pipe on the pump for the most accurate reading of
system return water pressure.
ISO 9001:2008
L-2565
Rev. 20120824
■■
Convenient packaging of multiple
essential components simplifies
installation
■■
Expansion tank protects against thermal
expansion
■■
Bladder-style expansion tank protects
against loss of air cushion
■■
Dual-scale pressure gauge is convenient
for US and international customers
■■
Pressure gauge connected to inlet pipe
gives most accurate reading
PMA1000
115
60/1
16000 - 23000
1/2 /MPT
1 /FPT
9.2/234
12.9/328
18/458
18/458
33/14.1
47/21.4
230
240
50/1
16000
P700
115
60/1
49000 - 120000
1 /FPT
11/4 /FPT
9.5/242
17.1/435
18/458
18/458
49/22.3
62/28.2
49.25/22.4
69.5/31.6
230
P120
115
60/1
24000 - 48000
1 /FPT
11/4 /FPT
9.2/234
12.9/328
18/458
18/458
48/21.8
62/28.2
9.5/242
17.1/435
230
Gauge
Gauge
Pump
Width
Width
Expansion Tank
Ball Valve &
Fill Connection
L-2565
Rev. 20120824
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Environmentally
Responsible
Assembled in the USA
Dealer
Pump packages do NOT include backflow preventers. If the chilled water fill assembly
is supplied by a potable water supply, then a reduced pressure zone (RPZ) backflow
preventer should be installed between the fill assembly and the potable water supply to
prevent contamination of the water.
Safety Notice:
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
Max. Depth
Height
Expansion Tank
P120/P700
Ball Valve &
Fill Connection
PMA1000
Height
Expansion Tank
Depth-Drain Pan
Pump
Max. Depth
Depth-Drain Pan
Pump
Dimensions
1 Pump packages do NOT include a backflow preventer. If the chilled water fill assembly is fed by a potable water supply, then a reduced pressure zone (RPZ) backflow preventer should be installed
between the fill assembly and the supply to prevent contamination of the potable water.
2 All dimensions ± 0.125 in. (3 mm).
Model (1)
Voltage (V)
Cycle (Hz)/Phase (Ph)
Total Air Handler Capacity (BTU/h)
Inlet Connection (in)
Outlet Connection (in)
Height (in/mm) (2)
Width (in/mm)
Depth-Drain Pan (in/mm)
Max. Depth (in/mm)
Net Weight (lbs/kg)
Gross Weight (lbs/kg)
Specifications for Pump Packages for Chilled Water Systems
104
AIR CONDITIONING ACCESSORIES
1
AIR CONDITIONING ACCESSORIES
Variable Frequency Drives (Standard)
Smooths Out Chilled Water Compressor Startup Power Demand
Key Benefits
A Variable Frequency Drive (VFD) completely eliminates the large starting inrush current of the
compressor by ramping up voltage and frequency in a controlled time period. This allows running
on limited dockside power, and also protects the generator from overload.
In addition to eliminating inrush, the VFD will also run a 60Hz rated compressor at 60Hz even
when input power is 50Hz, which allows full BTU capacity performance (230V only). The drive
also protects the compressor by monitoring input voltage and output current, and will shut down if
a problem is detected. On 208/230V systems, the VFD can “convert” single-phase input power to
3-phase output; however, the VFD current capacity must be derated (see table on second page).
The VFD unit produces a modified sine wave output for smooth acceleration and running, with
precise frequency resolution. It is designed to operate in extreme environments, such as an engine
room. However, the enclosure is ventilated, and must be kept dry. Any direct water contact can
damage the unit.
Built-in noise filters are standard and the VFD is CE approved. The Schneider Electric Altivar 312
VFDs incorporate a class A EMC filter into their design. This helps prevent high frequency noise
from affecting the AC power supply to which the drives are connected. If you have an application
or a power system that requires even lower noise emission, then we recommend you purchase the
class B EMC filters specifically designed to fit with the entire family of Altivar 312 VFDs. To reduce
the harmonic distortion caused by the VFD, we recommend you purchase a line reactor sized
appropriately for the particular VFD.
An LED display allows the user to monitor operation and faults. The VFD is pre-programmed from
the factory and no further setup is required. Power cables are available through special order.
How to choose the right size Variable Frequency Drive:
■■
■■
■■
Chiller compressor must be 3 phase and each compressor requires a dedicated VFD.
Multiply the chiller’s reverse cycle amps by 1.10 (10% safety factor).
Choose the VFD from the Comp Voltage and Max AMP Rating columns (in the table on the
following page) depending on compressor voltage and the phase of the input power supply,
respectively.
ISO 9001:2008
L-2413
Rev. 20130920
■■
Eliminates compressor start-up in-rush
current
■■
208/230V three-phase output with one- or
three-phase input
■■
Full 60Hz capacity even at 50Hz input
(230V only)
■■
Low electronic noise
■■
CE approved
■■
380/460V three-phase models available
VFD
SQD17.5A
230V
4251104
208/230
17.5
10.1
7.2/183
5.5/140
5.9/150
VFD
SQD27.5A
230V
4251105
208/230
27.5
15.9
9.1/232
7.1/181
6.7/171
VFD
SQD33A
230V
4251106
208/230
33
19.1
9.1/232
7.1/181
6.7/171
VFD
SQD54A
230V
4251110
208/230
54
31.2
13/331
9.7/247
7.5/191
VFD
SQD66A
230V
4251111
208/230
66
38.1
13/331
9.7/247
7.5/191
VFD
SQD9.5A
460V
4251108
380/460
9.5
N/A
7.2/183
5.5/140
5.9/150
VFD
SQD14.3A
460V
4251112
380/460
14.3
N/A
9.1/232
7.1/181
6.7/171
VFD
SQD17A
460V
4251202
380/460
17
N/A
9.1/232
7.1/181
6.7/171
VFD
SQD27.7A
460V
4251109
380/460
27.7
N/A
13/331
9.7/247
7.5/191
L-2413
Rev. 20130920
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
VFD
SQD33A
460V
4251201
380/460
33
N/A
13/331
9.7/247
7.5/191
Environmentally
Responsible
Width
Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 For programmed VFDs, please call your sales representative with the reference number and programming information (output voltage, input phase, and output frequency).
Reference Number
Compressor Voltage (V)
Max. Amps @ 3-PH. Input (A)
Max. Amps @ 1-PH. Input (A)
Height (in/mm)
Width (in/mm)
Depth (in/mm)
Model (1)
Specifications for Variable Frequency Drives (Standard)
Dealer
Height
Depth
106
AIR CONDITIONING ACCESSORIES
1
AIR CONDITIONING ACCESSORIES
HMDL Series Auxiliary Heat Modules
Providing Additional Ductable Heating In Cold Conditions
Key Benefits
Cruisair auxiliary heat modules provide additional heating when the boat is in extremely cold
seawater. They also permit specific compartments on the boat to be heated when the circulated
water system is in the cooling mode.
The modules are installed on the discharge side of the air handler. Safety features include: fin tube
heating elements with relatively low surface temperature, high temperature insulation on interior of
unit, and two-stage thermal protection.
Air handling units are available with integral electrical heat (CHBB Type).
ISO 9001:2008
L-0622
Rev. 20130419
■■
Electric resistance heat modules
■■
Up to 4 kW electric heat
■■
115V and 230V operation
■■
Fin tube heating elements
■■
Two-stage thermal protection
■■
High-temperature thermal protection
■■
Installed in flexible or built-in duct
■■
Used with ducted air handlers
115
60/1
8.7
15
11
7/178
11.9/303
9.9/252
5/127
10.5
Voltage (V)
Cycle (Hz)/Phase (Ph)
Heater Amps (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Height (in/mm) (2)(3)
Width (in/mm) (3)
Depth (in/mm) (3)
Fits Duct Size (in/mm)
Gross Weight (lbs)
230
60/1
4.4
10
6
7/178
11.9/303
9.9/252
5/127
10.5
HMDL1C-5
HMDL1.56
115
60/1
13
25
17
7.8/199
13.3/338
10.1/257
6/153
10.5
230
60/1
6.5
10
9
7.8/199
13.3/338
10.1/257
6/153
10.5
HMDL1.5C-6
HMDL1.57
115
60/1
13
25
17
7.8/199
13.4/341
9.9/252
7/178
10.5
230
60/1
6.5
10
9
7.8/199
13.4/341
9.9/252
7/178
10.5
115
60/1
17.4
35
22
7.8/199
13.4/341
9.9/252
7/178
10.5
HMDL1.5C-7 HMDL2-7
230
60/1
8.7
15
11
7.8/199
13.4/341
9.9/252
7/178
10.5
230
60/1
13
25
17
9.6/244
15.5/394
11.9/303
8/204
14
L-0622
Rev. 20130419
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
230
60/3
10
20
13
9.6/244
15.5/394
12/305
9/229
13
HMDL2C-7 HMDL3C-8 HMDL4DC-9
1 Interpreting HMDL model numbers: ‘HM’ = Heat Module; ‘D’ = Ducted; ‘1’ to ‘4’ = kW of electric heat; ‘C’ = 230V; No ‘C’ = 115V; ‘DC’ = 230V 3-phase; ‘-5’ to ‘-8’ = Duct size in inches.
2 Height does not include mounting grommets.
3 All dimensions ± 0.25 in. (6 mm).
HMDL1-5
Model (1)
Specifications for HMDL Series Auxiliary Heat Modules
Environmentally
Responsible
Assembled in the USA
Dimensions
Dealer
Depth
Width
Height
108
AIR CONDITIONING ACCESSORIES
1
AIR CONDITIONING ACCESSORIES
Air Distribution Components
Grilles, Duct, & Transition Boxes to Complete the A/C System
Key Benefits
Supply and return air grilles are available in several wood types, painted aluminum and plastic, and come in a
wide range of sizes and configurations
Marine Air and Cruisair offer supply and return air grilles in a wide assortment of dimensions,
styles, and materials to complement any yacht's interior. Custom sizes, materials, and colors are
available.
The louvres of supply air grilles are secured by nylon bushings for easy and dependable
positioning. Return air grilles have fixed louvres. Wood return air grilles have a lint screen which
can be removed for cleaning.
Round plastic supply air grilles are offered in several colors and are available with and without
shut-off dampers.
Marine Air and Cruisair also offer additional air distribution components, such as duct and transition
boxes, to complete the boat air conditioning system. There are two types of duct available: round/
wire with woven fabric and round/wire and mylar fabric shell with 1.0 in. (25 mm) thick insulation.
A full range of diameters and lengths are availble, and all duct attaches easily to duct rings, grilles,
and transition boxes.
Transition boxes come in two styles: Fully-insulated aluminum construction and vacuum-formed
ABS plastic. Aluminum boxes come in standard and custom sizes and are ideal for applications
where space is limited. ABS boxes are off the shell and feature insulated mounting pads and a
unique stepped-ring design for flexibility.
Flexible duct is available in a
wide range of diameters and
lengths.
ISO 9001:2008
Vacuum-formed ABS
transition boxes have
insulated mounting pads and
a stepped duct ring design.
Aluminum transition boxes
are available in standard
and custom sizes and
configurations.
L-0239
Rev. 20140117
■■
Supply and return air grilles available
in aluminum, plastic, and wood
construction in a wide range of sizes and
configurations
■■
Grilles are available in custom finishes,
colors, and sizes
■■
Wood return air grilles have pop-out
louvres and easy-to-clean filters
■■
Wood return air grilles have pop-out
louvres and easy-to-clean filters
■■
Wood supply air grilles have doubledeflection, moveable louvres available in
anodized bronze or aluminum finish
■■
Aluminum return air grilles have durable
fixed-vane louvres and are available with
or without filters
■■
Aluminum supply air griles have
adjustable louvres to direct air flow
■■
Durable polyurethane paint finishes
available with aluminum grilles
■■
Transition boxes available in aluminum or
vacuum-formed ABS plastic construction
and do not restrict airflow
■■
Aluminum t-boxes are full insulated and
ideal for applications where space is
limited; standard and custom sizes
■■
ABS t-boxes have insulated mounting
pads and a unique stepped ring design
for flexibility
Return Air Grille Size (sq. in/sq. cm)
64/413
70/451.6
98/632.3
100/645.2
130/838.8
200/1290.4
240/1548.5
360/2322.7
Cut-out dimensions are 2.0 in. (51 mm) for 2SA models (2 in. duct), 3.0 in. (76 mm) for 3SA models (3 in.
duct), and 4.0 in. (102 mm) for 4SA models (4 in. duct).
Grille depth, as measured from back of frame: 2SA models are 1.31 in. (33 mm), 3SA models are 2.16 in.
(55 mm), and 4SA models are 2.38 in. (60 mm).
Frame (flange) diameter is 2.75 in. (70 mm) for 2SA models, 3.875 in. (98 mm) for 3SA models, and 5.50
in. (140 mm) for 4SA models. A special adapter is available to use with the 4SA for 3.0 in. (76 mm) duct.
L-0239
Rev. 20140117
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Opening dimensions are 0.375 in. (10 mm) larger than the transition size.
Flange-to-flange dimensions are 1.5 in. (38 mm) larger than the transition size.
Depth, as measured from back of flange: 4.0 in. (102 mm) for 4x models, 4.5 (114 mm)
or 5.75 in. (146 mm) for 5x and 6x models with round or obround duct rings, respectively.
Flange dimensions are 0.5625 (143 mm) on all sides.
Available in 5.25 in. (134 mm) and 6.25 in. (159 mm) square.
Opening dimensions are 0.5 in. (13 mm) larger than the transition size.
Flange-to-flange dimensions are 1.75 in. (44 mm) larger than the transition size.
Depth is 0.125 in. (3 mm) more than the transition size.
Flange dimensions are 0.625 in. (16 mm) on all sides.
Height, with mounting flange, for 10,000, 12,000, and 16,000 t-boxes is 7.875 in. (200
mm); 7,000 t-box is 6.875 in. (175 mm).
The 10,000, 12,000, and 16,000 t-boxes accommodate 6 in. (153 mm), 5 in. (127 mm),
and 4 in. (102 mm) duct rings on one side and 5 in., 4 in, and 3 in. (76 mm) duct rings on
the other side.
The 7,000 t-box accommodates 5 in. (127 mm) and 4 in. (102 mm) duct rings on one
side and 4 in. and 3 in. (76 mm) duct rings on the other side.
Opening dimensions are 0.25 in. (7 mm) larger than the transition size.
Flange-to-flange dimensions are 1.75 in. (44 mm) larger than the transition size.
Depth of aluminum transitions is 0.25 in. (7 mm) more than the diameter of the largest
round ring, as measured from the back of the flange.
Flange dimensions are 0.75 in. (19 mm) on all sides.
■■
■■
■■
■■
■■
■■
Environmentally
Responsible
Assembled in the USA
Dealer
3 in. ABS (76 mm) OB = 3.875 x 1.625 in. (95 x 42 mm), 2 in. (51 mm) depth
4 in. ABS (102 mm) OB = 5.125 x 2.25 in. (130 x 58 mm), 2 in. (51 mm) depth
5 in. ABS (127 mm) OB = 6.5 x 2.625 in. (165 x 67 mm), 2 in. (51 mm) depth
6 in. ABS (153 mm) OB = 7.438 x 3.375 in. (189 x 86 mm), 2 in. (51 mm) depth
7 in. ABS (178 mm) OB = 9.0 x 3.625 in. (223 x 92 mm), 2 in. (51 mm) depth
8 in. aluminum (204 mm) OB = 9.25 x 5.0 in. (235 x 127 mm), 2 in. (51 mm) depth
Obround (OB) Ring Dimensions
■■
■■
■■
■■
Aluminum Transitions
■■
■■
■■
Vacuum-Formed Transition Boxes
■■
■■
■■
■■
■■
Square Vacuum-Formed Transitions
■■
■■
■■
■■
Vacuum-Formed Transitions
Transitions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
■■
■■
■■
Duct Ring Diameter (in/mm)
4/102
5/127
6/152
6/152
6/152
7/178
8/203
8/203
Cut-out dimensions for supply air grilles (TH and TV models) and return air grilles without filter (TRA)
are 0.375 in. (10 mm) smaller than nominal grille size. Cut-out dimensions for return air grilles with filter
(TRAF models) are 0.125 in. (3 mm) smaller.
Outside frame dimensions for all aluminum grilles are 0.875 in. (22 mm) larger than nominal grille size.
Grille depth, as measured from back of frame: Supply air grilles are 0.875 in. (22 mm) and return air
grilles are 1.0 in. (25 mm).
Frame (flange) dimensions are 0.625 in. (16 mm) on all sides.
Plastic Grilles (Circular)
■■
■■
■■
■■
Supply Air Grille Size (sq. in/sq. cm)
32/206.5
35/225.8
49/316
60/387
70/451.6
100/645.2
140/903.3
196/1264.6
Cut-out dimensions are equal to the grille's nominal height and width.
Outside frame dimensions are 0.9375 in. (± 0.0625) (24 mm (± 2 mm)) larger than nominal grille size.
Grille depth, as measured from back of frame: Primary supply air grilles (VH models) are 1.375 in. (35
mm), secondary closeable supply air grilles (VML models) are 1.875 in. (48 mm), and return air grilles
(RA models) are 0.875 in. (22 mm).
Frame (flange) dimensions are 0.563 (14 mm) on all sides.
Aluminum Grilles
■■
■■
■■
■■
Wood Grilles
Return and Supply Air Grilles
Capacity (BTU/hr)
4000
6000
9000
10000
12000
18000
24000
36000
Grille Sizing by Air Handler BTU/hr Capacity
110
AIR CONDITIONING ACCESSORIES
1
DOMETIC MARINE AIR CONDITIONING
C
oo
ls
&
H
ts
ea
Dometic EnviroComfort Retrofit Kits (R-410A)
Climate Control At the Touch Of a Button
Key Benefits
Enjoy ideal temperatures on your boat year-round with EnviroComfort (ECD) self-contained air
conditioning kits, now available with R-410A refrigerant, an environmentally safe gas.
ECD R-410A kits are available in 6,000, 10,000, and 16,000 BTUs of cooling and heating so you
can size the system to suit your boat for ultimate comfort in a range of climates.
All units have high-velocity blowers with internal motors for a more compact installation footprint.
The blower can be rotated to a horizontal or vertical position for greater installation flexibility. Units
are built on an easy-to-plumb stainless-steel drain pan, and the pre-installed return-air filter is
removable for cleaning.
ECD units are operated by a compact digital control/display (included) that features a bright green
LED and large buttons. For added installation convenience, the plastic electrical box can be
mounted remotely.
ECD kits are ideal for replacing an existing air conditioning system or for a new air conditioning
installation. The Retrofit Kit includes the ECD self-contained air conditioning unit and digital
control with bezel and is intended to replace an older self-contained air conditioner of comparable
capacity. The ECD6K will replace a 5,000 to 7,000 BTU/hr unit; the ECD10K will replace an 8,000
to 11,000 BTU/hr unit; and the ECD16K will replace a 12,000 to 16,000 BTU/hr unit.
The Installation Kit includes all air distribution and plumbing components that, when combined
with the Retrofit Kit, comprises an entirely new air conditioning system installation that is suited for
treating one interior space. If air conditioning a second interior space is desired, add the Dual Duct
Kit which includes a "Y" duct ring connector, 12.5 ft. (3.8 m) of flexible insulated duct, and a circular
supply air grille.
The ECD Installation Kit
includes all air distribution
and plumbing components
that, when combined with the
ECD Retrofit Kit, comprise
a complete air conditioning
system installation.
ISO 9001:2008
The optional Dual Duct Kit
will air condition an additional
interior space.
L-3003
Rev. 20140117
■■
High velocity, rotatable blower for
horizontal or vertical installation
■■
Environmentally safe R-410A refrigerant
■■
Compact Dometic digital display/control
■■
Plastic remote electrical box for
convenience in mounting
■■
Stainless-steel drain pan
■■
Pre-installed return-air filter, easily
removable and cleanable
■■
Small, compact, space-saving design
■■
Retrofit Kit includes digital control and
replaces an existing self-contained air
conditioning unit
■■
Optional Dual Duct Kit for air conditioning
an additional interior space
■■
Available in 6,000, 10,000, and 16,000
BTU/hr capacities
Height
Width
ECD6K-410A
207500306
6000
115
60/1
4.6
5.9
36
15
12
410A
11.25/286
16/407
9/229
4/102
5/8 /16
38/17.3
8.75/223
6.5/166
2.77/71
ECD10K-410A
207500310
10000
115
60/1
7
9.1
42
25
16
410A
13.25/337
20/508
9.63/245
6/153
5/8 /16
57/25.9
8.75/223
6.5/166
2.77/71
ECD16K-410A
207500316
16000
115
60/1
10.5
13.7
62
40
25
410A
13.5/343
20/508
11.25/286
6/153
5/8 /16
64/29.1
8.75/223
6.5/166
2.77/71
L-3003
Rev. 20140117
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
67/30.4
5.1
6.6
34
20
12
230
207500017
Environmentally
Responsible
Remote
Electrical Box
Assembled in the USA
Seawater
Pump
Discharge Grille
Dealer
Seawater
Strainer
Seawater
Supply Line
Dometic
Air Conditioning Unit
Insulated Flex Duct
Condensate
Drain
To AC
Power
Connection
Digital Control and Thermostat
Installation
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
Depth
Dimensions
1 All dimensions ± 0.30 in. (8 mm).
Model
Part Number (P/N)
Capacity (BTU/h) (1)
Voltage (V)
Cycle (Hz)/Phase (Ph)
Full Load Amps (FLA) Cool (A)
Full Load Amps (FLA) Heat (A)
Locked Rotor Amps (LRA) (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Refrigerant Type
Height (in/mm) (1)
Width (in/mm) (1)
Depth (in/mm) (2)
Min. Supply Duct Size (in/mm) (1)
Seawater Inlet Connection (in/mm)
Net Weight (lbs/kg) (1)
Height-Electrical Box (in/mm)
Width-Electrical Box (in/mm)
Depth-Electrical Box (in/mm)
Specifications for Dometic EnviroComfort Retrofit Kits (R-410A)
Thru-hull
Fitting
Valve
Return Air Grille
Overboard Discharge
112
DOMETIC MARINE AIR CONDITIONING
1
AIR-COOLED AIR CONDITIONING
o
o
N ing g
b tin
um c
Pl Du
DuraSea Rooftop Air-Cooled Air Conditioner
Drop-In Cooling Unit That Requires No Plumbing or Ducting
Key Benefits
The DuraSea Rooftop is a 15,000 BTU/hr air conditioner* built to endure harsh marine
environments. Ideal for patrol boats, house boats, and other vessels, it is designed to be installed
on a flat deck or rooftop and cool the area directly below. It is air cooled and requires no plumbing
or ducting.
The air-distribution box (ADB), sold separately, attaches to the underside of the unit. Accessible
from the interior cabin, the ADB contains the thermostat, fan controls, return-air vent and two
supply-air vents that blow in opposite directions for increased cooling capability. The three-speed
blower works in cooling and ventilation-only modes.
Both the condenser and evaporator coils are coated using the ElectroFin® E-coat process which
provides superior resistance to salt-air corrosion and UV damage when compared to spray coating.
E-coat employs electrically charged molecules to coat the components for complete and uniform
coverage with no material bridging between the fins. The E-coat material was salt-spray tested for
5,000 hours, not 1,000 like competing units. In addition, the condenser and evaporator fans are
also corrosion resistant and will not rust. Unlike the competition, we use oversize coils for improved
performance and dehumidification.
Rugged and strong, the DuraSea Rooftop weighs only 103 lbs. (46.7 kg). The heavy-duty
reinforcement plate ties the evaporator and condenser together to minimize vibration and
movement. A vibration-isolating L-bracket on the compressor and fan motor is incorporated for
additional stabilization. Rubber clamps and bushings further control noise and vibration. The
powder-coated base pan is 15% thicker than other models.
* The 50Hz model is rated at 12,000 BTU/hr.
Compressor is bracketed
at top as well as bottom
to minimize vibration and
movement while under way.
ISO 9001:2008
Weather-tight fan motor and
bearings with a stainlesssteel shaft.
The air distribution box
(sold separately) mounts on
the ceiling to provide A/C
controls.
L-3010
Rev. 20130118
■■
Air-cooled unit designed for rooftop or
deckmount installation
■■
No plumbing or ducting required
■■
Provides 15,000 BTU/hr. of cooling (60Hz
model only)
■■
Rugged and strong, yet lightweight
■■
High efficiency, low power consumption
■■
ElectroFin® E-coat process for superior
resistance to corrosion and UV damage
■■
Vibration-free operation
■■
Compressor stabilization to endure
extreme motion
■■
Three-speed high-performance fan for
cooling and ventilation
■■
Sealed motor and bearings
■■
Stainless-steel fan-motor shaft
■■
Oversize coils for better performance and
dehumidification
■■
Environmentally safe R-410A refrigerant
■■
Air distribution box (sold separately)
includes mechanical control and interior
panel
■■
Optional electric heat
DuraSea Rooftop
15000
115V/60Hz
15.3
66.0
R-410A
13.1/334
29.8/759
34.8/886
103/46.7
12000
240V/50Hz
7.0
28.0
R-410A
13.1/334
29.8/759
34.8/886
102/46.3
L-3010
Rev. 20130118
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Environmentally
Responsible
Depth
Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 All dimensions ± 0.30 in. (8 mm).
2 All weights ± 10%
Model
Capacity (BTU/hr)
Voltage/Cycle
Run Amps
Locked Rotor Amps (LRA)
Refrigerant Type
Height (in/mm)
Width (in/mm)
Depth (in/mm)
Net Weight (lbs/kg)
Technical Specifications for DuraSea Rooftop Air Conditioner
Assembled in the USA
Dealer
Height
Width
114
AIR-COOLED AIR CONDITIONING
1
AIR-COOLED AIR CONDITIONING
l
ed Sa t
ce r. es
Ex 0 H y T
00 ra
6, Sp
DuraSea Series Air-Cooled Condensers
The Only Marinized Air-Cooled Condenser
Key Benefits
Dometic DuraSea air conditioning condensing units are designed for maximum durability in
the harshest of nautical applications. These rugged units offer long service life, exceptional
performance, energy conservation, and reliability.
The DuraSea’s cabinet is constructed of stainless-steel 304, which resists heavy salt-spray and
also provides UV protection. Designed for deck or rooftop mounting, the optional risers elevate
the unit above the mounting surface to provide excellent water drainage and protect the coil from
debris and salt water. To further fortify the unit from severe marine conditions, corrosion-resistant
stainless-steel fasteners are used, and all other external components have a protective coating.
The control box and compressor are strategically located within the cabinet for easy service access
and for extra protection against corrosion.
All DuraSea units employ scroll compressors, the latest in high-efficiency, reliable compressor
technology. They reduce noise and vibration, and have a higher tolerance of liquid refrigerant and
system contaminants. Scroll compressors also feature low start torque to minimize the startingcurrent spike that occurs with old-technology compressors. Units are available in 410A refrigerant
or 417A refrigerant for retrofit of existing systems.
The new 7.5- and 10-ton sizes offer a compact footprint in an "industrial" styled equipment design
that includes forklift slots and lifting eyes.
DCA60 shown with service
panel removed and optional
risers which protect the unit
from debris.
ISO 9001:2008
L-2544
Rev. 20130222
■■
Designed for workboats, platform, and
military vessels
■■
Built to withstand the harsh elements of
the commercial marine environment
■■
Operates with most evaporators
■■
Hermetically-sealed scroll compressor
with internal overload protection
■■
Permanently lubricated fan motor with
Ingress Protection of IP 54 or better
■■
High-efficiency copper tube and
aluminum fin coil with dipped E-coating
that exceeds 6,000-hour salt spray test
■■
Copper tube/copper fin coil upgrade
available for the ultimate in corrosion
protection
■■
Brass base valves with sweat
connections and service ports
■■
Vertical fan mount design
■■
High- and low-pressure controls
■■
Heavy-duty contactor with lug
connections
■■
Optional risers elevate the unit above
the mounting surface to protect the coil
from salt water and debris (3-ton to 6-ton
models only)
■■
Optional stainless-steel 316 cabinet
construction for maximum corrosion
resistance
Special Options
■■
Nema 4 electric box
■■
Fan cycling control
■■
Three-phase monitor
■■
Crankcase heater
DCA36E
36000
460
60/3
5
45
2
12
10
414/506
R410A
6000
38.5/978
33/839
33/839
1/2 /13
7/8 /23
84
290
DCA36D
36000
230
60/3
10.9
95
3.6
35
25
197/253
R410A
6000
38.5/978
33/839
33/839
1/2 /13
7/8 /23
84
290
84
310
7/8 /23
1/2 /13
DCA48D
48000
230
60/3
12.7
120
3.6
30
24
197/253
R410A
6000
38.5/978
33/839
33/839
84
310
7/8 /23
1/2 /13
DCA48E
48000
460
50/3
6.6
60
2
20
15
414/506
R410A
6000
38.5/978
33/839
33/839
84
365
7/8 /23
1/2 /13
DCA60D
60000
230
60/3
14.8
123
3.6
30
25
197/253
R410A
6000
38.5/978
33/839
33/839
84
365
7/8 /23
1/2 /13
DCA60E
60000
460
60/3
7.4
70
2
15
14
414/506
R410A
6000
38.5/978
33/839
33/839
84
375
7/8 /23
1/2 /13
DCA72D
72000
230
60/3
17.9
160
3.6
55
40
197/253
R410A
6000
38.5/978
33/839
33/839
Width
Optional Leg
Supports
5.0 in.
(117 mm)
Height
Refrigerant
Connections
Service
Access
Panel
Depth
Power
Connections
84
375
7/8 /23
1/2 /13
DCA72E
72000
460
60/3
8.9
87
2
40
26
414/506
R410A
6000
38.5/978
33/839
33/839
84
475
11/8 /29
7/8 /23
DCA90D
90000
230
60/3
25.5
235
3.6
70
50
197/253
R410A
6000
42/1067
33/839
48/1220
84
475
11/8 /29
7/8 /23
DCA90E
90000
460
60/3
13.4
110
2
30
25
414/506
R410A
6000
42/1067
33/839
48/1220
L-2544
Rev. 20130222
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
87
525
11/8 /29
7/8 /23
DCA120E
120000
460
60/3
15.3
142
4.9
30
26
414/506
R410A
10000
42/1067
33/839
48/1220
Air Discharge
18 in. (458 mm)
clearance required
87
525
11/8 /29
7/8 /23
DCA120D
120000
230
60/3
31.3
267
8.5
75
55
197/253
R410A
10000
42/1067
33/839
48/1220
Air Intake – 12 in. (305 mm)
clearance required - 3 sides
Height
Depth
Service
Access
Panel
Environmentally
Responsible
Assembled in the USA
Voltage
2361 = 230V/60Hz/1-Ph
2251 = 220V/50Hz/1-Ph
2363 = 208-230V/60Hz/3-Ph
4663 = 460V/60Hz/3-Ph
3853 = 380V/50Hz/3-Ph
Control Type
A = None (use with 24VAC thermostat)
Q = Q Control
Nominal Tonnage
036 = 3 Tons
048 = 4 Tons
060 = 5 Tons
072 = 6 Tons
090 = 7.5 Tons
120 = 10 Tons
Refrigerant Type
A = R410A
B = R417A
DuraSea
Condensing Unit
Dealer
Elec.
Access
Panel
Power
Connection
Refrigerant
Connections
Coil Options
A = AI Fin/Copper Tube
B = E-Coat AI/AI
C = Copper Fin/Tube
Not Used
0 = Not used
Design Revision
A = Initial Rev
Options
A = None
B = Nema 4x electric box and
heatshrunk electric connections
C = Low ambient fan cycling control
D = Phase monitor
E = Valve Fan Side (VFS) standard
on 7.5/10-ton models
F = Variable frequency drive
G = Crankcase heater
H = Suction accumulator
I = Reserved for future use
J = Reserved for future use
K = Combination of options B, C, D,
G, and H
Air Discharge – 24 in. (610 mm)
clearance required
DuraSea Model Number Nomenclature
Width
DuraSea 7.5- to 10-Ton Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
Air Intake
12 in. (305 mm)
clearance required
Dimensions
1 Must use time-delay fuses or HACR type circuit breakers of the same size as listed
2 Wire size should be determined in accordance with applicable electrical codes; extensive wire runs require larger size wires
3 Up to 50 ft. (15.2 m) in equivalent line length.
4 Weight for aluminum fin condenser coil with coating
Model
Nominal Capacity (BTU/h)
Voltage (V)
Cycle (Hz)/Phase (Ph)
Run Load Amps (RLA) (A)
Locked Rotor Amps (LRA) (A)
Full Load Amps (FLA) Blower (A)
Max. Circuit Breaker (A) (1)
Min. Circuit Ampacity (A) (2)
Min. Volts (V)/Max. Volts (V)
Refrigerant Type
Air Flow (cfm)
Height (in/mm) (1)
Width (in/mm)
Depth (in/mm)
Refrigerant Line ConnectionDischarge (in/mm) (3)
Refrigerant Line ConnectionSuction (in/mm) (3)
Sound Level (dB)
Net Weight (lbs) (4)
Specifications for DuraSea Series Air-Cooled Condensers
116
AIR-COOLED AIR CONDITIONING
1
ESKIMO ICE FISHBOX ICE SYSTEMS
EW
N
Eskimo Ice EI540D Fishbox Ice System
Produces Up to 540 Pounds (245 kg) of Fishbox Ice Per Day
Key Benefits
The Eskimo Ice EI540D system produces up to 540 lbs. (245 kg) of fishbox ice per day, roughly the
same output as its larger predecessor. The EI540D ice-making machine comes in a self-contained,
cube-shaped package with a 16 x 16 in. (413 x 413 mm) footprint, making it ideal for boats with
limited installation space but no less demand for reliable and efficient fishbox ice production.
EI540D units are easy to install. Ice is generated minutes after starting the system, and can be
conveyed up to 35 ft. (10.6 m) through an ice-delivery hose to nearly any desired location on board.
The system is operated by the Smart Logic control. The control is integrated into the electrical
box which can be mounted remotely for installation flexibility. Smart Logic features a full menu of
sensors and status lights monitor gas pressure, auger motor, compressor, water level, ice level,
and ice clogs, and will shut off the system if problems are detected.
EI540D units feature ventilated cover panels, which can be easily removed for convenient service
access from any side.
The EI540D system installation kit includes one electrical box with Smart Logic keypad/display,
water filter, and 35 ft. (10.6 m) of 3/4 in. (20 mm) ID ice delivery hose and insulation. This
smaller diameter hose is easier to install and less likely to kink. Units are available in 115V/60Hz,
230V/60Hz, and 220V/50Hz electrical configurations. The EI540D will support an additional
remotely-mountable Smart Logic keypad/display, which can be purchased separately.
■■
Produces up to 540 lbs. (245 kg) of
fishbox ice per day
■■
Thermal expansion valve increases
performance for all conditions
■■
Compact footprint - 16 x 16 in. (413 x 413
mm)
■■
Available in 50Hz and 60Hz models
■■
Up to two remotely-mounted Smart Logic
digital controls/display panels
■■
Photo-electric ice-level sensor
■■
Fresh-water filter included in kit
■■
Pre-charged system
■■
Sensors monitor all system functions
■■
Monitor system and restart from any
Smart Logic digital control location
■■
Improved fresh-water float switch
■■
Ventilated cover panels can be removed
for maintenance access from any side
■■
CAN-bus compatible
■■
Smaller 3/4 in. (20 mm) ID ice delivery
hose is easier to install, less likely to kink
Product Testimonial
"It can fill a five-gallon bucket in under an
hour. It doesn't get any better. Sushi quality
fish all the time."
—— Capt. Glenn Morgan, Carpe Momentum
"We recently installed an Eskimo Ice
machine on the Big Oh and it provides us
with professionally crushed ice to keep our
bait and our fish fresh while we’re fishing
tournaments all over the world. I would not
have a boat without an Eskimo Ice maker."
—— Capt. Ronnie Fields, In The Bite
Magazine's 2010 Captain of the Year
The easy-to-use Smart Logic
digital control monitors all
system functions.
ISO 9001:2008
Ventilated cover panels
can be removed for service
access from any side.
L-3076
Rev. 20130531
Overboard
Discharge
Eskimo Ice
System
Water Filter
Pump
Seawater Strainer
Ice Delivery Hose
Thru-Hull Fitting
Seawater Supply Line
16.25/413
16.25/413
16.25/413
5/8
82/37.2
87/39.5
64.7/244.1
EI540D
540/244.1
22/9.1
115
60/1
10.7
58.8
30
18
404A
Freshwater Supply Line
127/57.7
220
50/1
5.4
26.3
15
10
Freshwater
Tank
113.9/51.7
128/58.1
230
60/1
5.3
31
L-3076
Rev. 20130531
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Seawater Inlet
Ice Delivery Hose
Seawater Outlet
Environmentally
Responsible
Depth
Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
Fishbox
Installation
1 Actual capacity depends upon conditions
2 All dimensions ± 0.30 in. (8 mm).
3 All weights ± 10%
Model
Ice Capacity Per Day (lbs/kg) (1)
Ice Capacity Per Hour (lbs/kg) (1)
Voltage (V)
Cycle (Hz)/Phase (Ph)
Full Load Amps (FLA) Cool (A)
Locked Rotor Amps (LRA) (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Refrigerant Type
Water Consumption Per Day/24 Hours
(gpd/lpd)
Height (in/mm) (2)
Width (in/mm) (2)
Depth (in/mm) (2)
Seawater Inlet Connection (in)
Net Weight (lbs/kg) (3)
Gross Weight (lbs/kg) (3)
Specifications for Eskimo Ice EI540D Fishbox Ice System
Assembled in the USA
Freshwater Inlet
Dealer
Width
Condensate Drain
Electrical Harness
Height
118
ESKIMO ICE FISHBOX ICE SYSTEMS
1
ESKIMO ICE FISHBOX ICE SYSTEMS
EW
N
Eskimo Ice EI1000D Fishbox Ice System
Produces Up to 1,000 Pounds (454 kg) of Fishbox Ice Per Day
Key Benefits
■■
Produces up to 1,000 lbs. (454 kg) of
fishbox ice per day
■■
Conveys ice 50 ft. (15 m) through
insulated delivery hose
■■
Thermal expansion valve increases
performance for all conditions
■■
Compact footprint - 21.25 x 21.25 in. (540
x 540 mm)
■■
Available in 230V 60Hz; 220V 50Hz
model coming soon
■■
Up to two remotely-mounted Smart Logic
digital controls/display panels
■■
Photo-electric ice-level sensor
The Eskimo Ice EI1000D system produces up to 1000 lbs. (454 kg) of fishbox ice per day. That's
nearly 42 lbs. (19 kg) of ice per hour! The EI1000D ice-making machine comes in a self-contained,
compact package with a 21.25 x 21.25 in. (540 x 540 mm) footprint and a height of only 23.25 in.
(591 mm), making it ideal for boats with limited installation space but a big demand for reliable and
efficient fishbox ice production.
■■
Fresh-water filter included in kit
■■
Pre-charged system
■■
Sensors monitor all system functions
■■
Monitor system and restart from any
Smart Logic digital control location
EI1000D units are easy to install. Ice is generated minutes after starting the system, and can be
conveyed 50 to 70 ft. (15 to 21 m) depending on conditions and angle of run through an icedelivery hose to nearly any desired location on board.
■■
Improved fresh-water float switch
■■
Ventilated cover panels can be removed
for maintenance access from any side
■■
CAN-bus compatible
■■
Sealed gear box and TEFC motor
■■
Smaller 3/4 in. (20 mm) ID ice delivery
hose is easier to install, less likely to kink
The system is operated by the Smart Logic control. The control is integrated into the electrical
box which can be mounted remotely for installation flexibility. Smart Logic features a full menu of
sensors and status lights monitor pressure faults, auger motor, compressor, water level, ice level,
and ice clogs, and will shut off the system if problems are detected.
EI10000D units feature ventilated cover panels, which can be easily removed for convenient
service access from any side. The unit has a sealed gear box and a totally enclosed fan-cooled
(TEFC) motor.
The EI1000D installation kit includes one electrical box with Smart Logic keypad/display, water
filter, and 50 ft. (21 m) of 3/4 in. (20 mm) ID ice delivery hose and insulation. This smaller diameter
hose is easier to install and less likely to kink.
Units are available in a 230V/60Hz electrical configuration now, with a 220V/50Hz model coming
soon. The EI1000D supports an additional remotely-mountable Smart Logic keypad/display, which
can be purchased separately.
The easy-to-use Smart Logic
digital control monitors all
system functions.
ISO 9001:2008
Ventilated cover panels
can be removed for service
access from any side.
Special cylindrical ice shape
maximizes ice density for
greater cooling.
L-3118
Rev. 20130531
Overboard
Discharge
Eskimo Ice
System
Water Filter
Pump
Seawater Strainer
Ice Delivery Hose
Thru-Hull Fitting
Seawater Supply Line
Freshwater Supply Line
EI1000D
1000/453.6
42/19.1
230
60/1
10.7
58.8
30
18
404A
120/454.3
23.25/591
21.25/540
21.25/540
211/95.8
230/104.4
Freshwater
Tank
L-3118
Rev. 20130531
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Environmentally
Responsible
Width
Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
Fishbox
Installation
1 Actual capacity depends upon conditions
2 220V/50Hz model coming soon
3 All dimensions ± 0.30 in. (8 mm).
4 All weights ± 10%
Model
Ice Capacity Per Day (lbs/kg) (1)
Ice Capacity Per Hour (lbs/kg) (1)
Voltage (V) (2)
Cycle (Hz)/Phase (Ph)
Full Load Amps (FLA) Cool (A)
Locked Rotor Amps (LRA) (A)
Max. Circuit Breaker (A)
Min. Circuit Ampacity (A)
Refrigerant Type
Water Consumption Per Day/24 Hours (gpd/lpd)
Height (in/mm) (3)
Width (in/mm) (3)
Depth (in/mm) (3)
Net Weight (lbs/kg) (4)
Gross Weight (lbs/kg) (4)
Specifications for Eskimo Ice EI1000D Fishbox Ice System
Assembled in the USA
Dealer
Height
Width
120
ESKIMO ICE FISHBOX ICE SYSTEMS
1
ESKIMO ICE FISHBOX ICE SYSTEMS
EW
N
Dometic Eskimo Ice Diverter
Automatically Fill Two Fish Boxes Hands-Free
Key Benefits
The Dometic Eskimo Ice Diverter automatically distributes ice from a single Eskimo Ice system to
two separate fishboxes for maximum ice production.
The Eskimo Ice Diverter eliminates shoveling ice between fishboxes. When connected to the ice
delivery hose of an Eskimo Ice system, the compact Diverter automatically or manually switches
ice output from one box to the other.
Automatic Mode
■■
■■
■■
■■
■■
A smart electronic fishbox “Bin full” sensor alerts the Eskimo Ice system when fishbox 1 is ready
and automatically activates the Diverter to switch ice output to fishbox 2.
When fishbox 2 “Bin full” sensor automatically alerts it is ready, the Diverter again automatically
switches output back to fishbox 1.
If fishbox 1 is no longer full, then ice production and distribution continues.
If both fishboxes are full, ice production stops until either fishbox sensor automatically indicates it
is no longer full, then ice production resumes to that box.
Automatically keeps both fishboxes as full as possible.
Manual Mode
Select this mode if you only need to fill a second box occasionally. Manually specify whether you
want ice to go into fishbox 1 or fishbox 2.
The Dometic Eskimo Ice Diverter is strong enough to avoid ice jamming. If ice is in the hose when
the changeover happens, the diverter chops through it and still makes the switch.
■■
The rear of the Diverter,
showing the insulated
connection for the ice
delivery hose.
ISO 9001:2008
L-3230
Rev. 20130816
■■
Automatically fill two fish boxes instead
of one
■■
Fishbox sensors automatically monitor
the ice level in each box
■■
Electronic signals trigger the Diverter to
automatically switch ice output to either
fishbox
■■
Automatic or manual operation
■■
Maximize the capability of your Eskimo
Ice system
■■
Eliminate fishbox ice shoveling
Power Requirements
12V DC @ 10 Amps
Height (in/mm)
8.37/213
Width (in/mm)
17.12/435
Depth (in/mm)
11.35/289
L-3230
Rev. 20130816
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Environmentally
Responsible
Assembled in the USA
Width
Dimensions
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
Model
Eskimo Ice Diverter
Specifications for Eskimo Ice Diverter
Dealer
Height
Depth
122
ESKIMO ICE FISHBOX ICE SYSTEMS
1
ESKIMO ICE FISHBOX ICE SYSTEMS
EW
N
Dometic Eskimo Ice Pusher
Fill Your Whole Ice Bin, Not Just One Side
Key Benefits
Dometic introduces the first-ever ice pusher to keep ice machines producing ice by automatically
pushing the stacked ice away from the “bin-full” sensor located in the fish box.
One big pile of ice does not mean your fish box is full. Usually the end of the fish box located
away from the ice-delivery hose remains empty, but the safety sensors that prevent your boat from
being flooded with ice are fooled by the large pile at the filling end and tell the ice maker to stop
producing.
This important ice-stopping safety feature can be a source of frustration when sport fishermen
open their fish box and find it only partially filled with ice and unable to chill what they’ve just
caught. Often a deckhand is assigned to keep pushing the ice pile over, but that task can easily be
forgotten when things get hectic onboard.
Working electronically, the ice pusher is activated whenever the Eskimo Ice logic controls receive
a bin-full message. It slowly but powerfully extends from the side of the fish box and knocks the top
off the mountain of ice. This moves ice to the empty side of the fish box and ice production is not
interrupted. A safety feature prevents the pushing operation if the fish box lid is open.
Made of marine-grade stainless steel for durability, the ice pusher has a retractable cover that
keeps water and falling ice from interfering with the interior mechanism as the pusher moves
forward and back.
The pusher mechanism is totally sealed and can operate in the harshest marine environments,
including the saltwater slurries often favored by sport-fishing captains for keeping fish pristine.
Ice piles up below the output
fitting, eventually obstructing
the ice level sensor "eye".
ISO 9001:2008
The ice pusher extends 6.5
inches (165 mm), moving the
ice pile toward the opposite
end of the fishbox.
The ice pusher automatically
retracts, leaving a gap for
uninterrupted ice production.
L-3229
Rev. 20130816
■■
Redistributes ice to clear the "bin-full"
sensor
■■
No interruption of ice production
■■
Produces ice for longer periods of time
■■
Ensures there is plenty of ice ready when
you need it
■■
Works automatically with Eskimo Ice logic
controls
■■
Frees deckhands to focus on more
productive tasks
■■
Marine-grade stainless-steel parts
■■
Retractable cover keeps falling ice out of
the mechanism
■■
Completely sealed pusher mechanism
Power Requirements
12V DC @ 10 Amps
Width
Height (in/mm)
9.14/233
Height
Depth 2
Width (in/mm)
21.14/537
Depth 1
Depth 1 (in/mm) (1)
4.30/110
L-3229
Rev. 20130816
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Depth 2 (in/mm) (2)
10.77/274
Environmentally
Responsible
RETRACTED
ICE PUSHER
ICE LEVEL SENSOR
SENSES “BIN FULL”
ICE DELIVERY
HOSE
Assembled in the USA
Dealer
ICE PUSHER RETRACTS & REMAINS STATIONARY
UNTIL “BIN FULL” IS DETECTED AGAIN
ICE PRODUCTION DOES NOT STOP
WHILE ICE PUSHER EXPANDS & RETRACTS
ICE IS GRADUALLY PUSHED AWAY FROM
THE ICE DELIVERY FITTING & SENSOR
ICE PUSHER BEGINS TO EXPAND
WHEN “BIN FULL” IS DETECTED
ICE PRODUCED BY THE ESKIMO
ICE SYSTEM PILED UP ON ONE
SIDE OF THE FISHBOX
LID SENSOR ENSURES ICE PUSHER
MOVES ONLY WHEN LID IS CLOSED
How the Eskimo Ice Pusher Works
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
Dimensions
1 Ice pusher depth when retracted.
2 Ice pusher depth when fully extended.
Model
Eskimo Ice Pusher
Specifications for Eskimo Ice Pusher
FISHBOX
DECK
124
ESKIMO ICE FISHBOX ICE SYSTEMS
1
ICE MAKERS
EW
N
HZB Series Portable Ice Makers
Make Up to 33 Lbs. of Ice Every 24 Hours
Key Benefits
The HZB-12SA, which makes 23 lbs. of ice per day, and the larger capacity HZB-15S, which makes 33 lbs. of ice
per day
Dometic's HZB series of portable ice makers makes it possible to have ice where and when you
need it.
Efficient HZB ice makers can produce up to 33 lbs. (15 kg) of ice every 24 hours. After turning on
the unit, simply add fresh water, select the cube size, and the ice maker does the rest. Ice is ready
about 14 minutes after turning on the unit.
HZB units can make different sized ice cubes. Cube size selection is made on the LED control
panel, which also features low water and ice full indicators.
The removable basket holds up to 2.5 lbs. (1.1 kg) of ice. The basket is slotted on the bottom to
allow water from the melting ice to flow back into the water reservoir for more ice production.
The energy saving clear window in the lid allows ice level checking without raising the lid and losing
cold. HZB ice makers include an ice scoop, self-storing drain fitting, and is available in stainlesssteel or black finish (HZB-12 only).
Select from three cube sizes
on the HZB-15S LED control
panel, which also indicates
low water and ice full.
ISO 9001:2008
Select small or large cube
size on the HZB-12S LED
control panel, which also
indicates empty water and
full ice.
The removable ice basket is
slotted to allow for water from
melted ice to be recycled
into more ice. Ice scoop is
included.
L-3209
Rev. 20131122
■■
HZB-15S makes up to 33 lbs. of ice every
24 hours
■■
HZB-12 makes up to 23 lbs. of ice every
24 hours
■■
Removable basket holds 2.5 lbs. (HZB15S) or 1.8 lbs. (HZB-12) of ice
■■
Makes two (HZB-12) or three (HZB-15S
only) cube sizes
■■
Ice is ready in about 14 minutes
■■
Ice full and water empty control panel
indicators
■■
Slotted ice basket allows water from
melting ice to be recycled into more ice
■■
Automatic shutoff when water is low
■■
Automatic shutoff when ice basket is full
■■
HZB-12 is available with black finish
(HZB-12A) or stainless-steel and black
finish (HZB-12SA)
■■
Ice scoop included
■■
Window in lid allows ice level checking
without opening the lid and losing cold
■■
Convenient recessed carry handles
(HZB-15S only)
■■
Dometic 1-Year Protection Plus warranty
120VAC/60Hz
120VAC/60Hz
HZB-12 (1)
HZB-15S
1.2
2.4
Amps
Ice Capacity
Per 24 Hrs.
(lbs/kg)
23/10.4
33.0/15
Ice Basket
Capacity (lbs/
kg)
1.8/0.8
2.5/1.1
12.9/328
17.0/432
Height (in/
mm)
9.5/242
15.0/381
Width (lbs/
mm)
14.1/358
17.0/432
Depth (in/mm)
21/9.5
32/14.5
Net Weight
(lbs/kg)
L-3209
Rev. 20131122
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
25/11.3
42/19.1
Gross Weight
(lbs/kg)
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
1 Use ‘HZB-12A’ for black finish or ‘HZB-12SA’ for black/silver finish.
Voltage
Model
Specifications for HZB Series Portable Ice Makers
Environmentally
Responsible
Dealer
126
ICE MAKERS
1
WATER PURIFIERS
EW
N
Dometic Spot Zero Water Purifier Systems
Spot-Free Washing
Key Benefits
Dometic Spot Zero control panel with display, pressure gauges, and flow meters
Imagine a gleaming boat and a spot-free wash down with no need to go back and wipe or chamoisdry the vessel’s finished surfaces.
The Dometic Spot Zero removes 95-99% of total dissolved solids (TDS) from any dock or on-board
water supply. The result is soft, pure water that lets water-sprayed surfaces dry clean without
leaving spots that have to be wiped away. Air-drying after a Spot Zero rinse helps preserve the
boat’s paint and wax finishes since "wiping away" dissolved solids can grind them into finished
surfaces, creating minute scratches.
Fill your holding tanks with Dometic Spot Zero water to be used for bathing, cooking, drinking, and
making crystal-clear ice on-board. Enjoy spot-free glassware, dishes, and shower surfaces, and
eliminate mineral build-up in ice machines for less maintenance.
Dometic Spot Zero is a fresh-water reverse-osmosis system that comes in two models: The standalone SZ3000 which is installed on-board and a portable bench-sized dock box that can be stored
and used dockside, lifted abord, or installed on-board. Both models have a capacity of 130 gallons
per hour (492 liters per hour).
Dometic Spot Zero uses a multi-step reverse-osmosis process: Filters remove sediment,
granulated activated carbon removes chlorine, chloramines and heavy metals, and a semipermeable membrane allows the passage of water but not ions or larger molecules. In addition
to eliminating 95-99% of TDS, Dometic Spot Zero also removes viruses, cysts, bacteria, and
radioactive contaminants from any dock water anywhere in the world.
■■
Eliminates water spots
■■
Removes 95-99% of total dissolved solids
■■
Purifies dockside water
■■
Removes viruses, cysts, and bacteria
■■
No need to chamois-dry surfaces
■■
Stop wasting time drying by hand
■■
Extends wax and paint life
■■
Provides pure water for bathing and
drinking
■■
Use dockside or install on-board
■■
Compact design
■■
Very low power consumption
■■
Very low noise and vibration
■■
130 GPH (492 LPH) capacity
Special Options
■■
Wheels and lifting rings for the dock box
Product Testimonial
"Less soap is used in the washing machines
because the water is so soft. Same in the
showers — they don't have to clean so
much. The ice in the ice makers is fantastic
and the water tastes amazing. Outside with
the guys rinsing down, Spot Zero is great.
It saves the paint because they don't have
to buff off any hard water. On the windows
the water beads off. It's definitely a must. It
saves so many headaches. I've found it's
fantastic."
—— Mike Baird, Chief Engineer, 164 ft.
Christensen
Removes 95-99% of total
dissolved solids from any
dock water supply.
ISO 9001:2008
Dometic Spot Zero can be
installed on-board.
Available in a dock box.
L-3206
Rev. 20140117
7.5A @ 115V
4.0A @ 230V
SZ3000
Control Unit Control Unit
HxWxD
Weight
16 x 18 x 9 in.
(407 x 458 x 229 50 lbs/22.7 kg
mm)
Membranes
HxWxD
47 x 16.5 x 6
(1,194 x 419 x
153 mm)
96 lbs/43.5 kg
Membranes
Weight
Pre War
Pre Filter
HxWxD
Weight
17 x 17 x 10 in.
(432 x 432 x 254 42 lbs/19.1 kg
mm)
Dock Box (1)
Dock Box
H x W x D (1)
Weight
25 x 54 x 22 in.
(635 x 1,372 x 195 lbs/88 kg
559 mm)
L-3206
Rev. 20140117
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
...in a dock box option (with or without wheels).
Dometic Spot Zero control panel, pre filter, and semi-permeable membranes can be installed in an onboard
configuration, or...
1 For dock box with wheels option add 6 in. (153 mm) to the height.
Amperage
Model
Specifications for Dometic Spot Zero System
Environmentally
Responsible
Assembled in the USA
Dealer
128
WATER PURIFIERS
1
SHIP-WIDE VENTILATION
EW
N
Dometic Livos Ship-Wide Ventilation Systems
Fans, Blowers, Mist Eliminators, Dampers & Controls
Key Benefits
■■
Custom solutions for protecting marine
machinery spaces
■■
Pressure- and temperature-monitoring
fan controls with fire system shutdown as
standard
■■
Fan controls available for 3-phase and
24V DC fans and blowers
■■
Optional central monitoring interface
available for fan controls
■■
Smoke and fire dampers are available in
marine-grade aluminum or stainless steel
■■
Dampers can be operated manually,
pneumatically, or electronically
■■
Mist-eliminating grilles (demisters) are
custom designed for maximum air flow
and minimum restriction
■■
Demisters have four drainage options:
Bottom, face, horizontal, or sump
■■
Commercial-grade fans and blowers
built for optimal corrosion resistance and
weight
■■
Blades are constructed of high-strength
PPG glass-reinforced polyamide
■■
AC fans have powder coated housing
■■
Fan motors are high efficiency, direct
drive, and reversible
■■
Marine-grade aluminum or 316 stainlesssteel hardware
Fan controls, mist eliminators, smoke and fire dampers, fans, and blowers for ship-wide ventilation systems
Dometic Livos products provide ship-wide ventilation for the commercial and pleasure boat
markets. Products and systems include axial fans, centrifugal blowers, smoke and fire dampers,
mist-eliminating grilles, and electronic fan controls.
Livos commercial-grade axial fans and centrifugal blowers provide cooling and/or combustion air
for marine machinery spaces. Materials are chosen with corrosion resistance and weight in mind.
Blades are constructed of high-strength PPG glass-reinforced polyamide, with standard powder
coating of the fan housing. Fan motors are high efficiency, direct drive, and reversible. All hardware
is either marine-grade aluminum or 316 stainless steel.
Smoke and fire dampers close off the engine space in the event of a fire. The lack of fresh air in
conjunction with the release of fire retardant can snuff out a fire and save a boat from possibly
burning to the waterline. Dampers come in both marine-grade aluminum and stainless steel.
Mist-eliminating grilles stop corrosive salt mist and water from entering the engine room. Each mist
eliminator is custom designed for maximum air flow and minimum restriction for a given machinery
package, keeping air flow and dimensional restrictions in mind. There are four mist eliminator
drainage options: bottom draining, face draining, horizontal and sump draining.
Pressure- and temperature-monitoring fan controls are available for three-phase fans and blowers,
as well as 24 VDC fans. They can be manual variable speed, temperature controlled, pressure
controlled, or pressure and temperature controlled. DC controls are temperature based. All controls
come standard with fire system shutdowns. Three-phase systems can also have fire damper
control. Interface with central monitoring systems is optional.
3-phase axial fans available
in 12-48 in. (30.5-61 cm)
diameter range, with
high-strength PPG glassreinforced polyamide blades.
ISO 9001:2008
Mist eliminators are custom
designed to maximize air
flow, with four drainage
options: Bottom, face,
horizontal, or sump.
Smoke and fire dampers are
available in marine-grade
aluminum or stainless steel
with manual, pneumatic
(shown), or electronic
operation.
L-3283
Rev. 20140117
L-3283
Rev. 20140117
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
Main
Engine
Environmentally
Responsible
Assembled in the USA
Combustion Air
Engine Exhaust
Dealer
Cooling Air
Cooling Air Exhaust
Axial Exhaust
Fan
Generator
Main
Engine
Axial Intake Fan
Combustion Air
Generator
Main
Engine
Axial Exhaust Fan
Engine Exhaust
Cooling Air Exhaust
Axial Exhaust
Fan
Generator
Main
Engine
Axial Exhaust Fan
Pressure & Temp. Controlled – 4 Fans
Cooling Air
Generator
Specifications and availability subject to change without notice.
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
Engine Exhaust
Combustion Air
Mist Eliminator
Cooling Air Exhaust
Generator
Main
Engine
Hull Side Openings
Cooling Air
Generator
Main
Engine
Axial Intake Fan
Pressure & Temp. Controlled – 2 Fans
Disadvantages: Fan sizing becomes critical, significant cost, complexity, large fans present
packaging issues, large electrical loads
Advantages: Precise control of pressure and temperature, reduced opening and moisture
eliminators size, lightweight, automatic operation both underway and dockside
By using intake and exhaust fans capable of supplying the required combustion and exhaust air,
the static pressure created by the mist eliminators and grilles can be overcome. In addition,
smaller openings relative to engine size and natural draft configuration can be used. However, an
advanced Dometic Livos pressure- and temperature-monitoring fan control must be employed to
maintain optimal air pressure in the engine space.
At a certain point a vessel becomes too large for small fans to be effective, and the intake and
exhaust openings required for a natural-draft intake start to cause design issues because of open
area needed for proper function. When this happens it's time to step up to 3-phase AC fans with
variable-speed drives and a fan control.
Pressure and Temperature Controlled
Mist Eliminator
Disadvantages: Uncontrolled fans can be noisy,
with high DC current draw in some cases
Engine Exhaust
Generator
Main
Engine
Natural Draft - Cross-Flow Cooling Fans
Combustion Air
Cooling Air
Generator
Main
Engine
Natural Draft - No Fans
Mist Eliminator
Advantages: Simple, cost effective, lightweight,
temperature is controlled during trolling and low
RPM
Commonly found on sport-fish boats from 30-80 ft.
(9-24 m), a cross-flow fan arrangement is used to
control the temperature of the space, and the
engines pull the necessary combustion air through
the mist eliminators. This system typically uses two
or four DC fans or small single-phase AC fans.
Four-fan systems typically use the forward fans as
intakes and aft fans as exhaust which helps maintain
uniform temperatures at the engine intakes. On
larger vessels the fans may be 3-phase variable
speed with a control that is capable of automatic
temperature management.
Natural Draft – Cross-Flow Cooling Fans
Disadvantages: High temperatures at low RPM, no
control of temperature, large openings and mist
eliminators are needed as engine size increases to
provide an acceptable pressure drop for proper
engine operation
Advantages: Simple, inexpensive, lightweight, no
electrical load
Mist Eliminator
Mist Eliminator
A Natural-Draft ventilation system is the most basic.
The main engines pull air through the mist eliminators mounted in plenum boxes just inside the hull
openings. As the combustion air is exhausted, it
removes heat from the space and no fans are used.
A Natural-Draft system is typically used on small
boats with small engine spaces.
Hull Side Openings
Hull Side Openings
Natural Draft – No Fans
Mist Eliminator
Mist Eliminator
Mist Eliminator
Hull Side Openings
Mist Eliminator
Mist Eliminator
Types of Engine Ventilation Systems
130
SHIP-WIDE VENTILATION
1
Certified Worldwide Sales & Service Network
DOMETIC MARINE DIVISION
2000 N. Andrews Ave. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414
www.Dometic.com/Marine | [email protected]
24/7 TECH SUPPORT FOR UNITED STATES & CANADA:
8:00 AM to 5:00 PM Eastern Time: 800-542-2477
After hours and weekends: 888-440-4494
INTERNATIONAL SALES & SERVICES
Europe & the Middle East: Call +44(0)870-330-6101
For all other areas visit our website to find your nearest distributor.
L-0001
Rev. 20141209
ISO 9001:2008
Environmentally
Responsible
Dealer:
Click below to find more
Mipaper at www.lcis.com.tw
Mipaper at www.lcis.com.tw
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement