Geovision GV-COMV2
The GV‐COM V2 adds one RS‐485 port to your computer through a USB connector. The GV‐COM V2 can convert the standard RS‐232 signal, through USB connector, to RS‐485 2‐wire control for PTZ cameras, GV‐Data Capture Box or any other RS‐485 devices. Specifications OS Supported Serial Interface USB Communication Parameters Environmental Conditions 32‐bit Windows XP / Vista / 7 / 8 / Server 2008 64‐bit Windows 7 / 8 / Server 2008 R2 / Server 2012 RS‐485 Signal: RS485+, RS485‐ Connector: Terminal Resistance Switch (120Ω) 16 KV ESD for All Signals Serial Line Protection Compliance USB 2.0 Backward Compatible Speed Full speed 12 Mbps Parity None, Even, Odd Data Bit 7, 8 Stop Bit 1, 2 Flow Control RTS / CTS, XON / XOFF Speed 600 bps to 115,200 bps Operation Temperature 0~55°C / 32~131°F Humidity 5%~95% (Non‐Condensing) Dimensions(W x H x D) 68.5 x 33.5 x 16 (mm) / 2.7 x 1.32 x 0.63 (in) Installation Guide GV‐COM V2 Note: All specifications are subject to change without notice. June 14, 2013
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement