Leisure Aquanomic Aquaflow 1

Leisure Aquanomic Aquaflow 1
TAF1CM/-AN
Product finish
Product category
First supplied date
Aquanomic Aquaflow 1 Single Lever
Chrome
Single Lever
05/07/2013
EAN 13 barcode
5015834043937
Location of DOM trace code:
ABAF1B(mm/yy) on rear of handle
Product features:
• Metal construction throughout
• Single lever control for effortless single handed control
• Flow Limited output for part G compliance
• Supplied compete with flexible tail pipes for fast simple fitting
• Classic European design styling
Additional information / Parts included:
Nb. Model shown may
not be displayed in the
finish as described.
To include alignment label on top of handle
Product dimensions & valve type:
• Overall Height / projection: 163 mm
• Exit reach: 230 mm
• Exit height: 140 mm
• Centre distance(s): N/A mm
• Base diameter(s): 50 mm
• Recommended fixing hole diameter: Ø35 mm
• Max. surface fixing depth: 40 mm
• Control valve type: 40mm Ø Ceramic single lever
• Valve detail: N/A
• DDA compliant design? Yes
Product flow characteristics:
• Min / Max water pressure: 1.00 / 4.00 bar (HP1)
• Recommended / Maximum water temperature:
46°C / 70°C
• Part G:
Unrestricted mixed flow rate, 3 bar (litres / min):
3.8 +/-10%
*Flow results are produced under test conditions and represent
the non flow regulated dynamic output of the product model.
LP (lower pressure) less than 0.5 bar
MP (medium pressure) 0.5 bar to 1 bar
HP1 (high pressure) 1 bar to 2 bar
HP2 (very high pressure) 2 bar or more
Minimum flow rate (1 GPM) based on mixed flow.
TAF1CM/-AN
Aquanomic Aquaflow 1 Single Lever
Flow regulator included? 3.8L/min, on valve exit
Inlet pipes:
• Tail pipe inlet / outlet size: M12x1 / 1/2" BSPP Male / 15mm ID
• Inlet pipe type / length: Flexible stainless braided hose / 245 mm
Spout detail & Flow characteristics:
• Spout diameter: 22 mm
• Spout aerator size: M24x1 M
• Spout rotation range: 360°
• Aerator type: Honeycomb Aerator
• Aerator colouring: Neoperl HC grey & light blue
• Spout connection: Upper body unscrews
(threadlocked)
• Product flow characteristics: Single flow
• Non return valve (NRV) supplied: X 2 Filter (15mm)
Integral to hot & cold flexis
• NRV required to be installed for byelaw compliance:
Yes, on both hot & cold supplies
Product markings and indicators:
• Branding position: None
• Hot / Cold indication: Red & Blue Split Plastic Indices
Packaged properties:
Box length: 355 mm
Box depth: 60 mm
Tap only weight: 0.88 kg
Box width: 135 mm
Units per outer: 10
Boxed weight: 1.25 kg
Box has ‘pressure
warning sticker’ ?
No
Total card weight: 96 grams
Packaging branding:
Brown unprinted box
Total plastics weight: 15 grams
• Approval certificate number: WRAS 1405307
• Expiry date:
Warranty Summary (Full details available on request):
•
•
•
•
Materials and workmanship defects warranted for 5 years
Valves and working parts warranted for 2 years
Surface warranty defects warranted for 1 year
O-rings, hoses & gaskets warranted for 1 years
Care instructions:
•
•
•
•
Clean the mixers and showers regularly as required, using soap, do not use any other cleaners.
Regular cleaning will prevent the build up of lime scale and dirt
After cleaning rinse thoroughly with clean water to remove any cleaner residue
Residues of sink & worktop cleaners can also cause damage, so rinse with clean water after using, avoid contact with any abrasives
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement