The Twig Book
The Twig Book
generated on September 13, 2017
The Twig Book
This work is licensed under the new BSD license.
Contents at a Glance
Introduction .......................................................................................................................................5
Installation .........................................................................................................................................7
Twig for Template Designers...............................................................................................................9
Twig for Developers ..........................................................................................................................22
Extending Twig ................................................................................................................................31
Twig Internals...................................................................................................................................46
Deprecated Features..........................................................................................................................49
Recipes .............................................................................................................................................53
Coding Standards .............................................................................................................................62
autoescape ...........................................................................................................................................64
block ..................................................................................................................................................66
do ......................................................................................................................................................67
embed ..................................................................................................................................................68
extends ...............................................................................................................................................71
filter ................................................................................................................................................76
flush ..................................................................................................................................................77
for ....................................................................................................................................................78
from ...................................................................................................................................................81
if ......................................................................................................................................................82
import ................................................................................................................................................84
include ...............................................................................................................................................86
macro ..................................................................................................................................................88
sandbox ...............................................................................................................................................90
set ....................................................................................................................................................91
spaceless ............................................................................................................................................93
use ....................................................................................................................................................94
verbatim ..............................................................................................................................................96
with ...................................................................................................................................................97
abs ....................................................................................................................................................98
batch ..................................................................................................................................................99
capitalize ......................................................................................................................................... 101
convert_encoding ................................................................................................................................. 102
date ................................................................................................................................................. 103
date_modify........................................................................................................................................ 105
default ............................................................................................................................................. 106
escape .............................................................................................................................................. 107
PDF brought to you by
generated on September 13, 2017
Contents at a Glance | iii
first ................................................................................................................................................ 109
.............................................................................................................................................. 110
join ................................................................................................................................................. 111
json_encode........................................................................................................................................ 112
keys ................................................................................................................................................. 113
last ................................................................................................................................................. 114
length .............................................................................................................................................. 115
lower ................................................................................................................................................ 116
merge ................................................................................................................................................ 117
nl2br ................................................................................................................................................ 118
number_format ..................................................................................................................................... 119
raw .................................................................................................................................................. 121
replace ............................................................................................................................................. 122
reverse ............................................................................................................................................. 123
round ................................................................................................................................................ 125
slice ................................................................................................................................................ 126
sort ................................................................................................................................................. 128
split ................................................................................................................................................ 129
striptags .......................................................................................................................................... 131
title ................................................................................................................................................ 132
trim ................................................................................................................................................. 133
upper ................................................................................................................................................ 134
url_encode ......................................................................................................................................... 135
attribute .......................................................................................................................................... 136
block ................................................................................................................................................ 137
constant ............................................................................................................................................ 138
cycle ................................................................................................................................................ 139
date ................................................................................................................................................. 140
dump ................................................................................................................................................. 142
include ............................................................................................................................................. 144
max .................................................................................................................................................. 146
min .................................................................................................................................................. 147
parent .............................................................................................................................................. 148
random .............................................................................................................................................. 149
range ................................................................................................................................................ 150
source .............................................................................................................................................. 152
template_from_string ........................................................................................................................... 153
constant ............................................................................................................................................ 154
defined ............................................................................................................................................. 155
divisible by ...................................................................................................................................... 156
empty ................................................................................................................................................ 157
even ................................................................................................................................................. 158
iterable ............................................................................................................................................ 159
null ................................................................................................................................................. 160
odd .................................................................................................................................................. 161
same as ............................................................................................................................................. 162
format
iv | Contents at a Glance
Contents at a Glance | 4
Chapter 1
Introduction
This is the documentation for Twig, the flexible, fast, and secure template engine for PHP.
If you have any exposure to other text-based template languages, such as Smarty, Django, or Jinja,
you should feel right at home with Twig. It's both designer and developer friendly by sticking to PHP's
principles and adding functionality useful for templating environments.
The key-features are...
• Fast: Twig compiles templates down to plain optimized PHP code. The overhead compared to
regular PHP code was reduced to the very minimum.
• Secure: Twig has a sandbox mode to evaluate untrusted template code. This allows Twig to be used
as a template language for applications where users may modify the template design.
• Flexible: Twig is powered by a flexible lexer and parser. This allows the developer to define their
own custom tags and filters, and to create their own DSL.
Twig is used by many Open-Source projects like Symfony, Drupal8, eZPublish, phpBB, Piwik, OroCRM;
and many frameworks have support for it as well like Slim, Yii, Laravel, Codeigniter and Kohana — just
to name a few.
Prerequisites
Twig needs at least PHP 5.2.7 to run. As of 1.34, the minimum requirement was bumped to PHP 5.3.3.
Installation
The recommended way to install Twig is via Composer:
Listing 1-1
1
composer require "twig/twig:~1.0"
To learn more about the other installation methods, read the installation chapter; it also explains
how to install the Twig C extension.
PDF brought to you by
generated on September 13, 2017
Chapter 1: Introduction | 5
Basic API Usage
This section gives you a brief introduction to the PHP API for Twig.
Listing 1-2
1
2
3
4
5
6
7
8
require_once '/path/to/vendor/autoload.php';
$loader = new Twig_Loader_Array(array(
'index' => 'Hello {{ name }}!',
));
$twig = new Twig_Environment($loader);
echo $twig->render('index', array('name' => 'Fabien'));
Twig uses a loader (Twig_Loader_Array)
(Twig_Environment) to store the configuration.
to
locate
templates,
and
an
environment
The render() method loads the template passed as a first argument and renders it with the variables
passed as a second argument.
As templates are generally stored on the filesystem, Twig also comes with a filesystem loader:
Listing 1-3
1
2
3
4
5
6
$loader = new Twig_Loader_Filesystem('/path/to/templates');
$twig = new Twig_Environment($loader, array(
'cache' => '/path/to/compilation_cache',
));
echo $twig->render('index.html', array('name' => 'Fabien'));
If you are not using Composer, use the Twig built-in autoloader:
Listing 1-4
require_once '/path/to/lib/Twig/Autoloader.php';
Twig_Autoloader::register();
PDF brought to you by
generated on September 13, 2017
Chapter 1: Introduction | 6
Chapter 2
Installation
You have multiple ways to install Twig.
Installing the Twig PHP package
Installing via Composer (recommended)
Install Composer1 and run the following command to get the latest version:
Listing 2-1
1
composer require twig/twig:~1.0
Installing from the tarball release
1.
2.
3.
4.
Download the most recent tarball from the download page2
Verify the integrity of the tarball http://fabien.potencier.org/article/73/signing-project-releases
Unpack the tarball
Move the files somewhere in your project
Installing the development version
Listing 2-2
1
git clone git://github.com/twigphp/Twig.git
Installing the PEAR package
Using PEAR for installing Twig is deprecated and Twig 1.15.1 was the last version published on the
PEAR channel; use Composer instead.
1. https://getcomposer.org/download/
2. https://github.com/twigphp/Twig/tags
PDF brought to you by
generated on September 13, 2017
Chapter 2: Installation | 7
Listing 2-3
1
2
pear channel-discover pear.twig-project.org
pear install twig/Twig
Installing the C extension
New in version 1.4: The C extension was added in Twig 1.4.
The C extension is optional but it brings some nice performance improvements. Note that the
extension is not a replacement for the PHP code; it only implements a small part of the PHP code to
improve the performance at runtime; you must still install the regular PHP code.
Twig comes with a C extension that enhances the performance of the Twig runtime engine; install it like
any other PHP extensions:
Listing 2-4
1
2
3
4
5
cd ext/twig
phpize
./configure
make
make install
You can also install the C extension via PEAR (note that this method is deprecated and newer
versions of Twig are not available on the PEAR channel):
Listing 2-5
1
2
pear channel-discover pear.twig-project.org
pear install twig/CTwig
For Windows:
1. Setup the build environment following the PHP documentation3
2. Put Twig's C extension source code into C:\php-sdk\phpdev\vcXX\x86\php-source-directory\ext\twig
3. Use the configure --disable-all --enable-cli --enable-twig=shared command instead of step 14
4. nmake
5. Copy the C:\php-sdk\phpdev\vcXX\x86\php-source-directory\Release_TS\php_twig.dll file to your PHP
setup.
For Windows ZendServer, ZTS is not enabled as mentioned in Zend Server FAQ.
You have to use configure --disable-all --disable-zts --enable-cli --enabletwig=shared to be able to build the twig C extension for ZendServer.
The built DLL will be available in C:\\php-sdk\\phpdev\\vcXX\\x86\\php-source-
directory\\Release
Finally, enable the extension in your php.ini configuration file:
Listing 2-6
1
2
extension=twig.so #For Unix systems
extension=php_twig.dll #For Windows systems
And from now on, Twig will automatically compile your templates to take advantage of the C extension.
Note that this extension does not replace the PHP code but only provides an optimized version of the
Twig_Template::getAttribute() method.
3. https://wiki.php.net/internals/windows/stepbystepbuild
PDF brought to you by
generated on September 13, 2017
Chapter 2: Installation | 8
Chapter 3
Twig for Template Designers
This document describes the syntax and semantics of the template engine and will be most useful as
reference to those creating Twig templates.
Synopsis
A template is simply a text file. It can generate any text-based format (HTML, XML, CSV, LaTeX, etc.).
It doesn't have a specific extension, .html or .xml are just fine.
A template contains variables or expressions, which get replaced with values when the template is
evaluated, and tags, which control the logic of the template.
Below is a minimal template that illustrates a few basics. We will cover further details later on:
Listing 3-1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
<!DOCTYPE html>
<html>
<head>
<title>My Webpage</title>
</head>
<body>
<ul id="navigation">
{% for item in navigation %}
<li><a href="{{ item.href }}">{{ item.caption }}</a></li>
{% endfor %}
</ul>
<h1>My Webpage</h1>
{{ a_variable }}
</body>
</html>
There are two kinds of delimiters: {% ... %} and {{ ... }}. The first one is used to execute
statements such as for-loops, the latter prints the result of an expression to the template.
IDEs Integration
Many IDEs support syntax highlighting and auto-completion for Twig:
PDF brought to you by
generated on September 13, 2017
Chapter 3: Twig for Template Designers | 9
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Textmate via the Twig bundle1
Vim via the Jinja syntax plugin2 or the vim-twig plugin3
Netbeans via the Twig syntax plugin4 (until 7.1, native as of 7.2)
PhpStorm (native as of 2.1)
Eclipse via the Twig plugin5
Sublime Text via the Twig bundle6
GtkSourceView via the Twig language definition7 (used by gedit and other projects)
Coda and SubEthaEdit via the Twig syntax mode8
Coda 2 via the other Twig syntax mode9
Komodo and Komodo Edit via the Twig highlight/syntax check mode
Notepad++ via the Notepad++ Twig Highlighter10
Emacs via web-mode.el11
Atom via the PHP-twig for atom12
Visual Studio Code via the Twig pack13
Also, TwigFiddle14 is an online service that allows you to execute Twig templates from a browser; it
supports all versions of Twig.
Variables
The application passes variables to the templates for manipulation in the template. Variables may have
attributes or elements you can access, too. The visual representation of a variable depends heavily on the
application providing it.
You can use a dot (.) to access attributes of a variable (methods or properties of a PHP object, or items
of a PHP array), or the so-called "subscript" syntax ([]):
Listing 3-2
1
2
{{ foo.bar }}
{{ foo['bar'] }}
When the attribute contains special characters (like - that would be interpreted as the minus operator),
use the attribute function instead to access the variable attribute:
Listing 3-3
1
2
{# equivalent to the non-working foo.data-foo #}
{{ attribute(foo, 'data-foo') }}
It's important to know that the curly braces are not part of the variable but the print statement. When
accessing variables inside tags, don't put the braces around them.
1. https://github.com/Anomareh/PHP-Twig.tmbundle
2. http://jinja.pocoo.org/docs/integration/#vim
3. https://github.com/lumiliet/vim-twig
4. http://plugins.netbeans.org/plugin/37069/php-twig
5. https://github.com/pulse00/Twig-Eclipse-Plugin
6. https://github.com/Anomareh/PHP-Twig.tmbundle
7. https://github.com/gabrielcorpse/gedit-twig-template-language
8. https://github.com/bobthecow/Twig-HTML.mode
9. https://github.com/muxx/Twig-HTML.mode
10. https://github.com/Banane9/notepadplusplus-twig
11. http://web-mode.org/
12. https://github.com/reesef/php-twig
13. https://marketplace.visualstudio.com/items?itemName=bajdzis.vscode-twig-pack
14. http://twigfiddle.com/
PDF brought to you by
generated on September 13, 2017
Chapter 3: Twig for Template Designers | 10
If a variable or attribute does not exist, you will receive a null value when the strict_variables
option is set to false; alternatively, if strict_variables is set, Twig will throw an error (see
environment options).
Implementation
For convenience's sake foo.bar does the following things on the PHP layer:
• check if foo is an array and bar a valid element;
• if not, and if foo is an object, check that bar is a valid property;
• if not, and if foo is an object, check that bar is a valid method (even if bar is the constructor - use
__construct() instead);
• if not, and if foo is an object, check that getBar is a valid method;
• if not, and if foo is an object, check that isBar is a valid method;
• if not, return a null value.
foo['bar'] on the other hand only works with PHP arrays:
• check if foo is an array and bar a valid element;
• if not, return a null value.
If you want to access a dynamic attribute of a variable, use the attribute function instead.
Global Variables
The following variables are always available in templates:
•
•
•
_self:
references the current template;
references the current context;
_charset: references the current charset.
_context:
Setting Variables
You can assign values to variables inside code blocks. Assignments use the set tag:
Listing 3-4
1
2
3
{% set foo = 'foo' %}
{% set foo = [1, 2] %}
{% set foo = {'foo': 'bar'} %}
Filters
Variables can be modified by filters. Filters are separated from the variable by a pipe symbol (|) and
may have optional arguments in parentheses. Multiple filters can be chained. The output of one filter is
applied to the next.
The following example removes all HTML tags from the name and title-cases it:
Listing 3-5
1
{{ name|striptags|title }}
Filters that accept arguments have parentheses around the arguments. This example will join a list by
commas:
PDF brought to you by
generated on September 13, 2017
Chapter 3: Twig for Template Designers | 11
Listing 3-6
1
{{ list|join(', ') }}
To apply a filter on a section of code, wrap it in the filter tag:
Listing 3-7
1
2
3
{% filter upper %}
This text becomes uppercase
{% endfilter %}
Go to the filters page to learn more about built-in filters.
Functions
Functions can be called to generate content. Functions are called by their name followed by parentheses
(()) and may have arguments.
For instance, the range function returns a list containing an arithmetic progression of integers:
Listing 3-8
1
2
3
{% for i in range(0, 3) %}
{{ i }},
{% endfor %}
Go to the functions page to learn more about the built-in functions.
Named Arguments
New in version 1.12: Support for named arguments was added in Twig 1.12.
Listing 3-9
1
2
3
{% for i in range(low=1, high=10, step=2) %}
{{ i }},
{% endfor %}
Using named arguments makes your templates more explicit about the meaning of the values you pass as
arguments:
Listing 3-10
1
2
3
4
5
{{ data|convert_encoding('UTF-8', 'iso-2022-jp') }}
{# versus #}
{{ data|convert_encoding(from='iso-2022-jp', to='UTF-8') }}
Named arguments also allow you to skip some arguments for which you don't want to change the default
value:
Listing 3-11
1
2
3
4
5
{# the first argument is the date format, which defaults to the global date format if null is passed #}
{{ "now"|date(null, "Europe/Paris") }}
{# or skip the format value by using a named argument for the time zone #}
{{ "now"|date(timezone="Europe/Paris") }}
You can also use both positional and named arguments in one call, in which case positional arguments
must always come before named arguments:
Listing 3-12
1
{{ "now"|date('d/m/Y H:i', timezone="Europe/Paris") }}
PDF brought to you by
generated on September 13, 2017
Chapter 3: Twig for Template Designers | 12
Each function and filter documentation page has a section where the names of all arguments are
listed when supported.
Control Structure
A control structure refers to all those things that control the flow of a program - conditionals (i.e.
if/elseif/else), for-loops, as well as things like blocks. Control structures appear inside {% ...
%} blocks.
For example, to display a list of users provided in a variable called users, use the for tag:
Listing 3-13
1
2
3
4
5
6
<h1>Members</h1>
<ul>
{% for user in users %}
<li>{{ user.username|e }}</li>
{% endfor %}
</ul>
The if tag can be used to test an expression:
Listing 3-14
1
2
3
4
5
6
7
{% if users|length > 0 %}
<ul>
{% for user in users %}
<li>{{ user.username|e }}</li>
{% endfor %}
</ul>
{% endif %}
Go to the tags page to learn more about the built-in tags.
Comments
To comment-out part of a line in a template, use the comment syntax {# ... #}. This is useful for
debugging or to add information for other template designers or yourself:
Listing 3-15
1
2
3
4
5
{# note: disabled template because we no longer use this
{% for user in users %}
...
{% endfor %}
#}
Including other Templates
The include function is useful to include a template and return the rendered content of that template into
the current one:
Listing 3-16
1
{{ include('sidebar.html') }}
By default, included templates have access to the same context as the template which includes them. This
means that any variable defined in the main template will be available in the included template too:
Listing 3-17
PDF brought to you by
generated on September 13, 2017
Chapter 3: Twig for Template Designers | 13
1
2
3
{% for box in boxes %}
{{ include('render_box.html') }}
{% endfor %}
The included template render_box.html is able to access the box variable.
The
filename
of
the
template
depends
on
the
template
loader.
For
instance,
the
Twig_Loader_Filesystem allows you to access other templates by giving the filename. You can
access templates in subdirectories with a slash:
Listing 3-18
1
{{ include('sections/articles/sidebar.html') }}
This behavior depends on the application embedding Twig.
Template Inheritance
The most powerful part of Twig is template inheritance. Template inheritance allows you to build a base
"skeleton" template that contains all the common elements of your site and defines blocks that child
templates can override.
Sounds complicated but it is very basic. It's easier to understand it by starting with an example.
Let's define a base template, base.html, which defines a simple HTML skeleton document that you
might use for a simple two-column page:
Listing 3-19
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
<!DOCTYPE html>
<html>
<head>
{% block head %}
<link rel="stylesheet" href="style.css" />
<title>{% block title %}{% endblock %} - My Webpage</title>
{% endblock %}
</head>
<body>
<div id="content">{% block content %}{% endblock %}</div>
<div id="footer">
{% block footer %}
&copy; Copyright 2011 by <a href="http://domain.invalid/">you</a>.
{% endblock %}
</div>
</body>
</html>
In this example, the block tags define four blocks that child templates can fill in. All the block tag does
is to tell the template engine that a child template may override those portions of the template.
A child template might look like this:
Listing 3-20
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
{% extends "base.html" %}
{% block title %}Index{% endblock %}
{% block head %}
{{ parent() }}
<style type="text/css">
.important { color: #336699; }
</style>
{% endblock %}
{% block content %}
<h1>Index</h1>
<p class="important">
Welcome to my awesome homepage.
</p>
{% endblock %}
PDF brought to you by
generated on September 13, 2017
Chapter 3: Twig for Template Designers | 14
The extends tag is the key here. It tells the template engine that this template "extends" another template.
When the template system evaluates this template, first it locates the parent. The extends tag should be
the first tag in the template.
Note that since the child template doesn't define the footer block, the value from the parent template
is used instead.
It's possible to render the contents of the parent block by using the parent function. This gives back the
results of the parent block:
Listing 3-21
1
2
3
4
5
{% block sidebar %}
<h3>Table Of Contents</h3>
...
{{ parent() }}
{% endblock %}
The documentation page for the extends tag describes more advanced features like block nesting,
scope, dynamic inheritance, and conditional inheritance.
Twig also supports multiple inheritance with the so called horizontal reuse with the help of the use
tag. This is an advanced feature hardly ever needed in regular templates.
HTML Escaping
When generating HTML from templates, there's always a risk that a variable will include characters that
affect the resulting HTML. There are two approaches: manually escaping each variable or automatically
escaping everything by default.
Twig supports both, automatic escaping is enabled by default.
The automatic escaping strategy can be configured via the autoescape option and defaults to html.
Working with Manual Escaping
If manual escaping is enabled, it is your responsibility to escape variables if needed. What to escape? Any
variable you don't trust.
Escaping works by piping the variable through the escape or e filter:
Listing 3-22
1
{{ user.username|e }}
By default, the escape filter uses the html strategy, but depending on the escaping context, you might
want to explicitly use any other available strategies:
Listing 3-23
1
2
3
4
{{
{{
{{
{{
user.username|e('js') }}
user.username|e('css') }}
user.username|e('url') }}
user.username|e('html_attr') }}
Working with Automatic Escaping
Whether automatic escaping is enabled or not, you can mark a section of a template to be escaped or not
by using the autoescape tag:
Listing 3-24
PDF brought to you by
generated on September 13, 2017
Chapter 3: Twig for Template Designers | 15
1
2
3
{% autoescape %}
Everything will be automatically escaped in this block (using the HTML strategy)
{% endautoescape %}
By default, auto-escaping uses the html escaping strategy. If you output variables in other contexts, you
need to explicitly escape them with the appropriate escaping strategy:
Listing 3-25
1
2
3
{% autoescape 'js' %}
Everything will be automatically escaped in this block (using the JS strategy)
{% endautoescape %}
Escaping
It is sometimes desirable or even necessary to have Twig ignore parts it would otherwise handle as
variables or blocks. For example if the default syntax is used and you want to use {{ as raw string in the
template and not start a variable you have to use a trick.
The easiest way is to output the variable delimiter ({{) by using a variable expression:
Listing 3-26
1
{{ '{{' }}
For bigger sections it makes sense to mark a block verbatim.
Macros
New in version 1.12: Support for default argument values was added in Twig 1.12.
Macros are comparable with functions in regular programming languages. They are useful to reuse often
used HTML fragments to not repeat yourself.
A macro is defined via the macro tag. Here is a small example (subsequently called forms.html) of a
macro that renders a form element:
Listing 3-27
1
2
3
{% macro input(name, value, type, size) %}
<input type="{{ type|default('text') }}" name="{{ name }}" value="{{ value|e }}" size="{{ size|default(20)
}}" />
{% endmacro %}
Macros can be defined in any template, and need to be "imported" via the import tag before being used:
Listing 3-28
1
2
3
{% import "forms.html" as forms %}
<p>{{ forms.input('username') }}</p>
Alternatively, you can import individual macro names from a template into the current namespace via
the from tag and optionally alias them:
Listing 3-29
1
2
3
4
5
6
7
8
{% from 'forms.html' import input as input_field %}
<dl>
<dt>Username</dt>
<dd>{{ input_field('username') }}</dd>
<dt>Password</dt>
<dd>{{ input_field('password', '', 'password') }}</dd>
</dl>
A default value can also be defined for macro arguments when not provided in a macro call:
PDF brought to you by
generated on September 13, 2017
Chapter 3: Twig for Template Designers | 16
Listing 3-30
1
2
3
{% macro input(name, value = "", type = "text", size = 20) %}
<input type="{{ type }}" name="{{ name }}" value="{{ value|e }}" size="{{ size }}" />
{% endmacro %}
If extra positional arguments are passed to a macro call, they end up in the special varargs variable as
a list of values.
Expressions
Twig allows expressions everywhere. These work very similar to regular PHP and even if you're not
working with PHP you should feel comfortable with it.
The operator precedence is as follows, with the lowest-precedence operators listed first: b-and, bxor, b-or, or, and, ==, !=, <, >, >=, <=, in, matches, starts with, ends with, .., +, -, ~,
*, /, //, %, is, **, |, [], and .:
Listing 3-31
1
2
3
4
5
6
7
{% set greeting = 'Hello ' %}
{% set name = 'Fabien' %}
{{ greeting ~ name|lower }}
{# Hello fabien #}
{# use parenthesis to change precedence #}
{{ (greeting ~ name)|lower }} {# hello fabien #}
Literals
New in version 1.5: Support for hash keys as names and expressions was added in Twig 1.5.
The simplest form of expressions are literals. Literals are representations for PHP types such as strings,
numbers, and arrays. The following literals exist:
• "Hello World": Everything between two double or single quotes is a string. They are useful
whenever you need a string in the template (for example as arguments to function calls, filters or just
to extend or include a template). A string can contain a delimiter if it is preceded by a backslash (\)
-- like in 'It\'s good'. If the string contains a backslash (e.g. 'c:\Program Files') escape
it by doubling it (e.g. 'c:\\Program Files').
• 42 / 42.23: Integers and floating point numbers are created by just writing the number down. If a
dot is present the number is a float, otherwise an integer.
• ["foo", "bar"]: Arrays are defined by a sequence of expressions separated by a comma (,) and
wrapped with squared brackets ([]).
• {"foo": "bar"}: Hashes are defined by a list of keys and values separated by a comma (,) and
wrapped with curly braces ({}):
Listing 3-32
1
2
3
4
5
6
7
8
9
10
{# keys as string #}
{ 'foo': 'foo', 'bar': 'bar' }
{# keys as names (equivalent to the previous hash) -- as of Twig 1.5 #}
{ foo: 'foo', bar: 'bar' }
{# keys as integer #}
{ 2: 'foo', 4: 'bar' }
{# keys as expressions (the expression must be enclosed into parentheses) -- as of Twig 1.5 #}
PDF brought to you by
generated on September 13, 2017
Chapter 3: Twig for Template Designers | 17
11
12
{% set foo = 'foo' %}
{ (foo): 'foo', (1 + 1): 'bar', (foo ~ 'b'): 'baz' }
• true / false: true represents the true value, false represents the false value.
• null: null represents no specific value. This is the value returned when a variable does not exist.
none is an alias for null.
Arrays and hashes can be nested:
Listing 3-33
1
{% set foo = [1, {"foo": "bar"}] %}
Using double-quoted or single-quoted strings has no impact on performance but string interpolation
is only supported in double-quoted strings.
Math
Twig allows you to calculate with values. This is rarely useful in templates but exists for completeness'
sake. The following operators are supported:
•
•
•
•
•
+:
Adds two objects together (the operands are casted to numbers). {{ 1 + 1 }} is 2.
-: Subtracts the second number from the first one. {{ 3 - 2 }} is 1.
/: Divides two numbers. The returned value will be a floating point number. {{ 1 / 2 }} is {{ 0.5 }}.
%: Calculates the remainder of an integer division. {{ 11 % 7 }} is 4.
//: Divides two numbers and returns the floored integer result. {{ 20 // 7 }} is 2, {{ -20 // 7 }} is -3
(this is just syntactic sugar for the round filter).
• *: Multiplies the left operand with the right one. {{ 2 * 2 }} would return 4.
• **: Raises the left operand to the power of the right operand. {{ 2 ** 3 }} would return 8.
Logic
You can combine multiple expressions with the following operators:
•
•
•
•
and:
Returns true if the left and the right operands are both true.
Returns true if the left or the right operand is true.
not: Negates a statement.
(expr): Groups an expression.
or:
Twig also support bitwise operators (b-and, b-xor, and b-or).
Operators are case sensitive.
Comparisons
The following comparison operators are supported in any expression: ==, !=, <, >, >=, and <=.
You can also check if a string starts with or ends with another string:
Listing 3-34
PDF brought to you by
generated on September 13, 2017
Chapter 3: Twig for Template Designers | 18
1
2
3
4
5
{% if 'Fabien' starts with 'F' %}
{% endif %}
{% if 'Fabien' ends with 'n' %}
{% endif %}
For complex string comparisons, the matches operator allows you to use regular expressions15:
Listing 3-35
1
2
{% if phone matches '/^[\\d\\.]+$/' %}
{% endif %}
Containment Operator
The in operator performs containment test.
It returns true if the left operand is contained in the right:
Listing 3-36
1
2
3
4
5
{# returns true #}
{{ 1 in [1, 2, 3] }}
{{ 'cd' in 'abcde' }}
You can use this filter to perform a containment test on strings, arrays, or objects implementing the
Traversable interface.
To perform a negative test, use the not in operator:
Listing 3-37
1
2
3
4
{% if 1 not in [1, 2, 3] %}
{# is equivalent to #}
{% if not (1 in [1, 2, 3]) %}
Test Operator
The is operator performs tests. Tests can be used to test a variable against a common expression. The
right operand is name of the test:
Listing 3-38
1
2
3
{# find out if a variable is odd #}
{{ name is odd }}
Tests can accept arguments too:
Listing 3-39
1
{% if post.status is constant('Post::PUBLISHED') %}
Tests can be negated by using the is not operator:
Listing 3-40
1
2
3
4
{% if post.status is not constant('Post::PUBLISHED') %}
{# is equivalent to #}
{% if not (post.status is constant('Post::PUBLISHED')) %}
15. http://php.net/manual/en/pcre.pattern.php
PDF brought to you by
generated on September 13, 2017
Chapter 3: Twig for Template Designers | 19
Go to the tests page to learn more about the built-in tests.
Other Operators
New in version 1.12.0: Support for the extended ternary operator was added in Twig 1.12.0.
The following operators don't fit into any of the other categories:
• |: Applies a filter.
• ..: Creates a sequence based on the operand before and after the operator (this is just syntactic
sugar for the range function):
Listing 3-41
1
2
3
4
{{ 1..5 }}
{# equivalent to #}
{{ range(1, 5) }}
Note that you must use parentheses when combining it with the filter operator due to the operator
precedence rules:
Listing 3-42
1
(1..5)|join(', ')
• ~: Converts all operands into strings and concatenates them. {{ "Hello " ~ name ~ "!" }}
would return (assuming name is 'John') Hello John!.
• ., []: Gets an attribute of an object.
• ?:: The ternary operator:
Listing 3-43
1
2
3
4
5
{{ foo ? 'yes' : 'no' }}
{# as of Twig 1.12.0 #}
{{ foo ?: 'no' }} is the same as {{ foo ? foo : 'no' }}
{{ foo ? 'yes' }} is the same as {{ foo ? 'yes' : '' }}
• ??: The null-coalescing operator:
Listing 3-44
1
2
{# returns the value of foo if it is defined and not null, 'no' otherwise #}
{{ foo ?? 'no' }}
String Interpolation
New in version 1.5: String interpolation was added in Twig 1.5.
String interpolation (#{expression}) allows any valid expression to appear within a double-quoted
string. The result of evaluating that expression is inserted into the string:
Listing 3-45
1
2
{{ "foo #{bar} baz" }}
{{ "foo #{1 + 2} baz" }}
Whitespace Control
New in version 1.1: Tag level whitespace control was added in Twig 1.1.
The first newline after a template tag is removed automatically (like in PHP.) Whitespace is not further
modified by the template engine, so each whitespace (spaces, tabs, newlines etc.) is returned unchanged.
Use the spaceless tag to remove whitespace between HTML tags:
PDF brought to you by
generated on September 13, 2017
Chapter 3: Twig for Template Designers | 20
Listing 3-46
1
2
3
4
5
6
7
{% spaceless %}
<div>
<strong>foo bar</strong>
</div>
{% endspaceless %}
{# output will be <div><strong>foo bar</strong></div> #}
In addition to the spaceless tag you can also control whitespace on a per tag level. By using the whitespace
control modifier on your tags, you can trim leading and or trailing whitespace:
Listing 3-47
1
2
3
4
5
6
7
{% set value = 'no spaces' %}
{#- No leading/trailing whitespace -#}
{%- if true -%}
{{- value -}}
{%- endif -%}
{# output 'no spaces' #}
The above sample shows the default whitespace control modifier, and how you can use it to remove
whitespace around tags. Trimming space will consume all whitespace for that side of the tag. It is possible
to use whitespace trimming on one side of a tag:
Listing 3-48
1
2
3
4
{% set value = 'no spaces' %}
<li>
{{- value }}
</li>
{# outputs '<li>no spaces
</li>' #}
Extensions
Twig can be easily extended.
If you are looking for new tags, filters, or functions, have a look at the Twig official extension repository16.
If you want to create your own, read the Creating an Extension chapter.
16. http://github.com/twigphp/Twig-extensions
PDF brought to you by
generated on September 13, 2017
Chapter 3: Twig for Template Designers | 21
Chapter 4
Twig for Developers
This chapter describes the API to Twig and not the template language. It will be most useful as reference
to those implementing the template interface to the application and not those who are creating Twig
templates.
Basics
Twig uses a central object called the environment (of class Twig_Environment). Instances of this class
are used to store the configuration and extensions, and are used to load templates from the file system or
other locations.
Most applications will create one Twig_Environment object on application initialization and use that
to load templates. In some cases it's however useful to have multiple environments side by side, if
different configurations are in use.
The simplest way to configure Twig to load templates for your application looks roughly like this:
Listing 4-1
1
2
3
4
5
6
7
require_once '/path/to/lib/Twig/Autoloader.php';
Twig_Autoloader::register();
$loader = new Twig_Loader_Filesystem('/path/to/templates');
$twig = new Twig_Environment($loader, array(
'cache' => '/path/to/compilation_cache',
));
This will create a template environment with the default settings and a loader that looks up the templates
in the /path/to/templates/ folder. Different loaders are available and you can also write your own
if you want to load templates from a database or other resources.
Notice that the second argument of the environment is an array of options. The cache option is a
compilation cache directory, where Twig caches the compiled templates to avoid the parsing phase
for sub-sequent requests. It is very different from the cache you might want to add for the evaluated
templates. For such a need, you can use any available PHP cache library.
PDF brought to you by
generated on September 13, 2017
Chapter 4: Twig for Developers | 22
Rendering Templates
To load a template from a Twig environment, call the load() method which returns a
Twig_TemplateWrapper instance:
Listing 4-2
$template = $twig->load('index.html');
Before Twig 1.28, you should use loadTemplate() instead which returns a Twig_Template
instance.
To render the template with some variables, call the render() method:
Listing 4-3
echo $template->render(array('the' => 'variables', 'go' => 'here'));
The display() method is a shortcut to output the template directly.
You can also load and render the template in one fell swoop:
Listing 4-4
echo $twig->render('index.html', array('the' => 'variables', 'go' => 'here'));
New in version 1.28: The possibility to render blocks from the API was added in Twig 1.28.
If a template defines blocks, they can be rendered individually via the renderBlock() call:
Listing 4-5
echo $template->renderBlock('block_name', array('the' => 'variables', 'go' => 'here'));
Environment Options
When creating a new Twig_Environment instance, you can pass an array of options as the constructor
second argument:
Listing 4-6
$twig = new Twig_Environment($loader, array('debug' => true));
The following options are available:
• debug boolean
When set to true, the generated templates have a __toString() method that you can use to
display the generated nodes (default to false).
• charset string (defaults to utf-8)
The charset used by the templates.
• base_template_class string (defaults to Twig_Template)
The base template class to use for generated templates.
• cache string or false
An absolute path where to store the compiled templates, or false to disable caching (which is the
default).
• auto_reload boolean
PDF brought to you by
generated on September 13, 2017
Chapter 4: Twig for Developers | 23
When developing with Twig, it's useful to recompile the template whenever the source code
changes. If you don't provide a value for the auto_reload option, it will be determined
automatically based on the debug value.
• strict_variables boolean
If set to false, Twig will silently ignore invalid variables (variables and or attributes/methods that
do not exist) and replace them with a null value. When set to true, Twig throws an exception
instead (default to false).
• autoescape string or boolean
If set to true, HTML auto-escaping will be enabled by default for all templates (default to true).
As of Twig 1.8, you can set the escaping strategy to use (html, js, false to disable).
As of Twig 1.9, you can set the escaping strategy to use (css, url, html_attr, or a PHP callback
that takes the template name and must return the escaping strategy to use -- the callback cannot be
a function name to avoid collision with built-in escaping strategies).
As of Twig 1.17, the filename escaping strategy (renamed to name as of Twig 1.27) determines
the escaping strategy to use for a template based on the template filename extension (this strategy
does not incur any overhead at runtime as auto-escaping is done at compilation time.)
• optimizations integer
A flag that indicates which optimizations to apply (default to -1 -- all optimizations are enabled; set
it to 0 to disable).
Loaders
Loaders are responsible for loading templates from a resource such as the file system.
Compilation Cache
All template loaders can cache the compiled templates on the filesystem for future reuse. It speeds up
Twig a lot as templates are only compiled once; and the performance boost is even larger if you use a PHP
accelerator such as APC. See the cache and auto_reload options of Twig_Environment above for
more information.
Built-in Loaders
Here is a list of the built-in loaders Twig provides:
Twig_Loader_Filesystem
New in version 1.10: The prependPath() and support for namespaces were added in Twig 1.10.
New in version 1.27: Relative paths support was added in Twig 1.27.
Twig_Loader_Filesystem loads templates from the file system. This loader can find templates in
folders on the file system and is the preferred way to load them:
Listing 4-7
$loader = new Twig_Loader_Filesystem($templateDir);
It can also look for templates in an array of directories:
Listing 4-8
$loader = new Twig_Loader_Filesystem(array($templateDir1, $templateDir2));
PDF brought to you by
generated on September 13, 2017
Chapter 4: Twig for Developers | 24
With such a configuration, Twig will first look for templates in $templateDir1 and if they do not exist,
it will fallback to look for them in the $templateDir2.
You can add or prepend paths via the addPath() and prependPath() methods:
Listing 4-9
$loader->addPath($templateDir3);
$loader->prependPath($templateDir4);
The filesystem loader also supports namespaced templates. This allows to group your templates under
different namespaces which have their own template paths.
When using the setPaths(), addPath(), and prependPath() methods, specify the namespace as
the second argument (when not specified, these methods act on the "main" namespace):
Listing 4-10
$loader->addPath($templateDir, 'admin');
Namespaced templates can be accessed via the special @namespace_name/template_path notation:
Listing 4-11
$twig->render('@admin/index.html', array());
Twig_Loader_Filesystem support absolute and relative paths. Using relative paths is preferred as it
makes the cache keys independent of the project root directory (for instance, it allows warming the cache
from a build server where the directory might be different from the one used on production servers):
Listing 4-12
$loader = new Twig_Loader_Filesystem('templates', getcwd().'/..');
When not passing the root path as a second argument, Twig uses getcwd() for relative paths.
Twig_Loader_Array
Twig_Loader_Array loads a template from a PHP array. It's passed an array of strings bound to
template names:
Listing 4-13
1
2
3
4
5
6
$loader = new Twig_Loader_Array(array(
'index.html' => 'Hello {{ name }}!',
));
$twig = new Twig_Environment($loader);
echo $twig->render('index.html', array('name' => 'Fabien'));
This loader is very useful for unit testing. It can also be used for small projects where storing all templates
in a single PHP file might make sense.
When using the Array or String loaders with a cache mechanism, you should know that a new
cache key is generated each time a template content "changes" (the cache key being the source code
of the template). If you don't want to see your cache grows out of control, you need to take care of
clearing the old cache file by yourself.
Twig_Loader_Chain
Twig_Loader_Chain delegates the loading of templates to other loaders:
Listing 4-14
1
2
3
4
5
6
$loader1 = new Twig_Loader_Array(array(
'base.html' => '{% block content %}{% endblock %}',
));
$loader2 = new Twig_Loader_Array(array(
'index.html' => '{% extends "base.html" %}{% block content %}Hello {{ name }}{% endblock %}',
'base.html' => 'Will never be loaded',
PDF brought to you by
generated on September 13, 2017
Chapter 4: Twig for Developers | 25
7
8
9
10
11
));
$loader = new Twig_Loader_Chain(array($loader1, $loader2));
$twig = new Twig_Environment($loader);
When looking for a template, Twig will try each loader in turn and it will return as soon as the template
is found. When rendering the index.html template from the above example, Twig will load it with
$loader2 but the base.html template will be loaded from $loader1.
Twig_Loader_Chain accepts any loader that implements Twig_LoaderInterface.
You can also add loaders via the addLoader() method.
Create your own Loader
All loaders implement the Twig_LoaderInterface:
Listing 4-15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
interface Twig_LoaderInterface
{
/**
* Gets the source code of a template, given its name.
*
* @param string $name string The name of the template to load
*
* @return string The template source code
*
* @deprecated since 1.27 (to be removed in 2.0), implement Twig_SourceContextLoaderInterface
*/
function getSource($name);
/**
* Gets the cache key to use for the cache for a given template name.
*
* @param string $name string The name of the template to load
*
* @return string The cache key
*/
function getCacheKey($name);
/**
* Returns true if the template is still fresh.
*
* @param string
$name The template name
* @param timestamp $time The last modification time of the cached template
*/
function isFresh($name, $time);
}
The isFresh() method must return true if the current cached template is still fresh, given the last
modification time, or false otherwise.
As of Twig 1.27, you should also implement Twig_SourceContextLoaderInterface to avoid
deprecation notices.
As of Twig 1.11.0, you can also implement Twig_ExistsLoaderInterface to make your loader
faster when used with the chain loader.
PDF brought to you by
generated on September 13, 2017
Chapter 4: Twig for Developers | 26
Using Extensions
Twig extensions are packages that add new features to Twig. Using an extension is as simple as using the
addExtension() method:
Listing 4-16
$twig->addExtension(new Twig_Extension_Sandbox());
Twig comes bundled with the following extensions:
• Twig_Extension_Core: Defines all the core features of Twig.
• Twig_Extension_Escaper: Adds automatic output-escaping and the possibility to escape/unescape
blocks of code.
• Twig_Extension_Sandbox: Adds a sandbox mode to the default Twig environment, making it safe
to evaluate untrusted code.
• Twig_Extension_Profiler: Enabled the built-in Twig profiler (as of Twig 1.18).
• Twig_Extension_Optimizer: Optimizes the node tree before compilation.
The core, escaper, and optimizer extensions do not need to be added to the Twig environment, as they
are registered by default.
Built-in Extensions
This section describes the features added by the built-in extensions.
Read the chapter about extending Twig to learn how to create your own extensions.
Core Extension
The core extension defines all the core features of Twig:
•
•
•
•
Tags;
Filters;
Functions;
Tests.
Escaper Extension
The escaper extension adds automatic output escaping to Twig. It defines a tag, autoescape, and a
filter, raw.
When creating the escaper extension, you can switch on or off the global output escaping strategy:
Listing 4-17
$escaper = new Twig_Extension_Escaper('html');
$twig->addExtension($escaper);
If set to html, all variables in templates are escaped (using the html escaping strategy), except those
using the raw filter:
Listing 4-18
1
{{ article.to_html|raw }}
You can also change the escaping mode locally by using the autoescape tag (see the autoescape doc for
the syntax used before Twig 1.8):
PDF brought to you by
generated on September 13, 2017
Chapter 4: Twig for Developers | 27
Listing 4-19
1
2
3
4
5
{% autoescape 'html' %}
{{ var }}
{{ var|raw }}
{# var won't be escaped #}
{{ var|escape }} {# var won't be double-escaped #}
{% endautoescape %}
The autoescape tag has no effect on included files.
The escaping rules are implemented as follows:
• Literals (integers, booleans, arrays, ...) used in the template directly as variables or filter arguments
are never automatically escaped:
Listing 4-20
1
2
3
4
{{ "Twig<br />" }} {# won't be escaped #}
{% set text = "Twig<br />" %}
{{ text }} {# will be escaped #}
• Expressions which the result is always a literal or a variable marked safe are never automatically
escaped:
Listing 4-21
1
2
3
4
5
6
7
8
9
10
{{ foo ? "Twig<br />" : "<br />Twig" }} {# won't be escaped #}
{% set text = "Twig<br />" %}
{{ foo ? text : "<br />Twig" }} {# will be escaped #}
{% set text = "Twig<br />" %}
{{ foo ? text|raw : "<br />Twig" }} {# won't be escaped #}
{% set text = "Twig<br />" %}
{{ foo ? text|escape : "<br />Twig" }} {# the result of the expression won't be escaped #}
• Escaping is applied before printing, after any other filter is applied:
Listing 4-22
1
{{ var|upper }} {# is equivalent to {{ var|upper|escape }} #}
• The raw filter should only be used at the end of the filter chain:
Listing 4-23
1
2
3
{{ var|raw|upper }} {# will be escaped #}
{{ var|upper|raw }} {# won't be escaped #}
• Automatic escaping is not applied if the last filter in the chain is marked safe for the current context
(e.g. html or js). escape and escape('html') are marked safe for HTML, escape('js') is
marked safe for JavaScript, raw is marked safe for everything.
Listing 4-24
1
2
3
4
5
{% autoescape 'js' %}
{{ var|escape('html') }} {# will be escaped for HTML and JavaScript #}
{{ var }} {# will be escaped for JavaScript #}
{{ var|escape('js') }} {# won't be double-escaped #}
{% endautoescape %}
Note that autoescaping has some limitations as escaping is applied on expressions after evaluation.
For instance, when working with concatenation, {{ foo|raw ~ bar }} won't give the expected
result as escaping is applied on the result of the concatenation, not on the individual variables (so,
the raw filter won't have any effect here).
PDF brought to you by
generated on September 13, 2017
Chapter 4: Twig for Developers | 28
Sandbox Extension
The sandbox extension can be used to evaluate untrusted code. Access to unsafe attributes and methods
is prohibited. The sandbox security is managed by a policy instance. By default, Twig comes with one
policy class: Twig_Sandbox_SecurityPolicy. This class allows you to white-list some tags, filters,
properties, and methods:
Listing 4-25
1
2
3
4
5
6
7
8
9
10
$tags = array('if');
$filters = array('upper');
$methods = array(
'Article' => array('getTitle', 'getBody'),
);
$properties = array(
'Article' => array('title', 'body'),
);
$functions = array('range');
$policy = new Twig_Sandbox_SecurityPolicy($tags, $filters, $methods, $properties, $functions);
With the previous configuration, the security policy will only allow usage of the if tag, and the upper
filter. Moreover, the templates will only be able to call the getTitle() and getBody() methods on
Article objects, and the title and body public properties. Everything else won't be allowed and will
generate a Twig_Sandbox_SecurityError exception.
The policy object is the first argument of the sandbox constructor:
Listing 4-26
$sandbox = new Twig_Extension_Sandbox($policy);
$twig->addExtension($sandbox);
By default, the sandbox mode is disabled and should be enabled when including untrusted template code
by using the sandbox tag:
Listing 4-27
1
2
3
{% sandbox %}
{% include 'user.html' %}
{% endsandbox %}
You can sandbox all templates by passing true as the second argument of the extension constructor:
Listing 4-28
$sandbox = new Twig_Extension_Sandbox($policy, true);
Profiler Extension
New in version 1.18: The Profile extension was added in Twig 1.18.
The profiler extension enables a profiler for Twig templates; it should only be used on your
development machines as it adds some overhead:
Listing 4-29
1
2
3
4
5
$profile = new Twig_Profiler_Profile();
$twig->addExtension(new Twig_Extension_Profiler($profile));
$dumper = new Twig_Profiler_Dumper_Text();
echo $dumper->dump($profile);
A profile contains information about time and memory consumption for template, block, and macro
executions.
You can also dump the data in a Blackfire.io1 compatible format:
Listing 4-30
$dumper = new Twig_Profiler_Dumper_Blackfire();
file_put_contents('/path/to/profile.prof', $dumper->dump($profile));
Upload the profile to visualize it (create a free account2 first):
1. https://blackfire.io/
PDF brought to you by
generated on September 13, 2017
Chapter 4: Twig for Developers | 29
Listing 4-31
1
blackfire --slot=7 upload /path/to/profile.prof
Optimizer Extension
The optimizer extension optimizes the node tree before compilation:
Listing 4-32
$twig->addExtension(new Twig_Extension_Optimizer());
By default, all optimizations are turned on. You can select the ones you want to enable by passing them
to the constructor:
Listing 4-33
$optimizer = new Twig_Extension_Optimizer(Twig_NodeVisitor_Optimizer::OPTIMIZE_FOR);
$twig->addExtension($optimizer);
Twig supports the following optimizations:
•
•
Twig_NodeVisitor_Optimizer::OPTIMIZE_ALL,
enables all optimizations (this is the default value).
Twig_NodeVisitor_Optimizer::OPTIMIZE_NONE, disables all optimizations. This reduces the compilation time,
but it can increase the execution time and the consumed memory.
Twig_NodeVisitor_Optimizer::OPTIMIZE_FOR, optimizes the for tag by removing the loop variable creation
whenever possible.
• Twig_NodeVisitor_Optimizer::OPTIMIZE_RAW_FILTER, removes the raw filter whenever possible.
• Twig_NodeVisitor_Optimizer::OPTIMIZE_VAR_ACCESS, simplifies the creation and access of variables in the
compiled templates whenever possible.
•
Exceptions
Twig can throw exceptions:
•
•
•
•
•
Twig_Error:
The base exception for all errors.
Thrown to tell the user that there is a problem with the template syntax.
Twig_Error_Runtime: Thrown when an error occurs at runtime (when a filter does not exist for instance).
Twig_Error_Loader: Thrown when an error occurs during template loading.
Twig_Sandbox_SecurityError: Thrown when an unallowed tag, filter, or method is called in a sandboxed
template.
Twig_Error_Syntax:
2. https://blackfire.io/signup
PDF brought to you by
generated on September 13, 2017
Chapter 4: Twig for Developers | 30
Chapter 5
Extending Twig
This section describes how to extend Twig as of Twig 1.12. If you are using an older version, read
the legacy chapter instead.
Twig can be extended in many ways; you can add extra tags, filters, tests, operators, global variables, and
functions. You can even extend the parser itself with node visitors.
The first section of this chapter describes how to extend Twig easily. If you want to reuse your
changes in different projects or if you want to share them with others, you should then create an
extension as described in the following section.
When extending Twig without creating an extension, Twig won't be able to recompile your
templates when the PHP code is updated. To see your changes in real-time, either disable template
caching or package your code into an extension (see the next section of this chapter).
Before extending Twig, you must understand the differences between all the different possible extension
points and when to use them.
First, remember that Twig has two main language constructs:
•
•
{{ }}:
{% %}:
used to print the result of an expression evaluation;
used to execute statements.
To understand why Twig exposes so many extension points, let's see how to implement a Lorem ipsum
generator (it needs to know the number of words to generate).
You can use a lipsum tag:
Listing 5-1
1
{% lipsum 40 %}
That works, but using a tag for lipsum is not a good idea for at least three main reasons:
• lipsum is not a language construct;
• The tag outputs something;
PDF brought to you by
generated on September 13, 2017
Chapter 5: Extending Twig | 31
• The tag is not flexible as you cannot use it in an expression:
1
Listing 5-2
{{ 'some text' ~ {% lipsum 40 %} ~ 'some more text' }}
In fact, you rarely need to create tags; and that's good news because tags are the most complex extension
point of Twig.
Now, let's use a lipsum filter:
Listing 5-3
1
{{ 40|lipsum }}
Again, it works, but it looks weird. A filter transforms the passed value to something else but here we use
the value to indicate the number of words to generate (so, 40 is an argument of the filter, not the value
we want to transform).
Next, let's use a lipsum function:
Listing 5-4
1
{{ lipsum(40) }}
Here we go. For this specific example, the creation of a function is the extension point to use. And you
can use it anywhere an expression is accepted:
Listing 5-5
1
2
3
{{ 'some text' ~ lipsum(40) ~ 'some more text' }}
{% set lipsum = lipsum(40) %}
Last but not the least, you can also use a global object with a method able to generate lorem ipsum text:
Listing 5-6
1
{{ text.lipsum(40) }}
As a rule of thumb, use functions for frequently used features and global objects for everything else.
Keep in mind the following when you want to extend Twig:
What?
Implementation difficulty?
How
often?
When?
macro
trivial
frequent
Content generation
global
trivial
frequent
Helper object
function
trivial
frequent
Content generation
filter
trivial
frequent
Value transformation
tag
complex
rare
DSL language construct
test
trivial
rare
Boolean decision
operator
trivial
rare
Values transformation
Globals
A global variable is like any other template variable, except that it's available in all templates and macros:
Listing 5-7
$twig = new Twig_Environment($loader);
$twig->addGlobal('text', new Text());
You can then use the text variable anywhere in a template:
Listing 5-8
PDF brought to you by
generated on September 13, 2017
Chapter 5: Extending Twig | 32
1
{{ text.lipsum(40) }}
Filters
Creating a filter is as simple as associating a name with a PHP callable:
Listing 5-9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
// an anonymous function
$filter = new Twig_SimpleFilter('rot13', function ($string) {
return str_rot13($string);
});
// or a simple PHP function
$filter = new Twig_SimpleFilter('rot13', 'str_rot13');
// or a class static method
$filter = new Twig_SimpleFilter('rot13', array('SomeClass', 'rot13Filter'));
$filter = new Twig_SimpleFilter('rot13', 'SomeClass::rot13Filter');
// or a class method
$filter = new Twig_SimpleFilter('rot13', array($this, 'rot13Filter'));
// the one below needs a runtime implementation (see below for more information)
$filter = new Twig_SimpleFilter('rot13', array('SomeClass', 'rot13Filter'));
The first argument passed to the Twig_SimpleFilter constructor is the name of the filter you will use
in templates and the second one is the PHP callable to associate with it.
Then, add the filter to your Twig environment:
Listing 5-10
$twig = new Twig_Environment($loader);
$twig->addFilter($filter);
And here is how to use it in a template:
Listing 5-11
1
2
3
{{ 'Twig'|rot13 }}
{# will output Gjvt #}
When called by Twig, the PHP callable receives the left side of the filter (before the pipe |) as the first
argument and the extra arguments passed to the filter (within parentheses ()) as extra arguments.
For instance, the following code:
Listing 5-12
1
2
{{ 'TWIG'|lower }}
{{ now|date('d/m/Y') }}
is compiled to something like the following:
Listing 5-13
<?php echo strtolower('TWIG') ?>
<?php echo twig_date_format_filter($now, 'd/m/Y') ?>
The Twig_SimpleFilter class takes an array of options as its last argument:
Listing 5-14
$filter = new Twig_SimpleFilter('rot13', 'str_rot13', $options);
Environment-aware Filters
If you want to access the current environment instance in your filter, set the needs_environment
option to true; Twig will pass the current environment as the first argument to the filter call:
Listing 5-15
PDF brought to you by
generated on September 13, 2017
Chapter 5: Extending Twig | 33
1
2
3
4
5
6
$filter = new Twig_SimpleFilter('rot13', function (Twig_Environment $env, $string) {
// get the current charset for instance
$charset = $env->getCharset();
return str_rot13($string);
}, array('needs_environment' => true));
Context-aware Filters
If you want to access the current context in your filter, set the needs_context option to true;
Twig will pass the current context as the first argument to the filter call (or the second one if
needs_environment is also set to true):
Listing 5-16
1
2
3
4
5
6
7
$filter = new Twig_SimpleFilter('rot13', function ($context, $string) {
// ...
}, array('needs_context' => true));
$filter = new Twig_SimpleFilter('rot13', function (Twig_Environment $env, $context, $string) {
// ...
}, array('needs_context' => true, 'needs_environment' => true));
Automatic Escaping
If automatic escaping is enabled, the output of the filter may be escaped before printing. If your filter
acts as an escaper (or explicitly outputs HTML or JavaScript code), you will want the raw output to be
printed. In such a case, set the is_safe option:
Listing 5-17
$filter = new Twig_SimpleFilter('nl2br', 'nl2br', array('is_safe' => array('html')));
Some filters may need to work on input that is already escaped or safe, for example when adding (safe)
HTML tags to originally unsafe output. In such a case, set the pre_escape option to escape the input
data before it is run through your filter:
Listing 5-18
$filter = new Twig_SimpleFilter('somefilter', 'somefilter', array('pre_escape' => 'html', 'is_safe' =>
array('html')));
Variadic Filters
New in version 1.19: Support for variadic filters was added in Twig 1.19.
When a filter should accept an arbitrary number of arguments, set the is_variadic option to true;
Twig will pass the extra arguments as the last argument to the filter call as an array:
Listing 5-19
$filter = new Twig_SimpleFilter('thumbnail', function ($file, array $options = array()) {
// ...
}, array('is_variadic' => true));
Be warned that named arguments passed to a variadic filter cannot be checked for validity as they will
automatically end up in the option array.
Dynamic Filters
A filter name containing the special * character is a dynamic filter as the * can be any string:
Listing 5-20
$filter = new Twig_SimpleFilter('*_path', function ($name, $arguments) {
// ...
});
The following filters will be matched by the above defined dynamic filter:
PDF brought to you by
generated on September 13, 2017
Chapter 5: Extending Twig | 34
•
•
product_path
category_path
A dynamic filter can define more than one dynamic parts:
Listing 5-21
$filter = new Twig_SimpleFilter('*_path_*', function ($name, $suffix, $arguments) {
// ...
});
The filter will receive all dynamic part values before the normal filter arguments, but after the
environment and the context. For instance, a call to 'foo'|a_path_b() will result in the following
arguments to be passed to the filter: ('a', 'b', 'foo').
Deprecated Filters
New in version 1.21: Support for deprecated filters was added in Twig 1.21.
You can mark a filter as being deprecated by setting the deprecated option to true. You can also give
an alternative filter that replaces the deprecated one when that makes sense:
Listing 5-22
$filter = new Twig_SimpleFilter('obsolete', function () {
// ...
}, array('deprecated' => true, 'alternative' => 'new_one'));
When a filter is deprecated, Twig emits a deprecation notice when compiling a template using it. See
Displaying Deprecation Notices for more information.
Functions
Functions are defined in the exact same way as filters, but you need to create an instance of
Twig_SimpleFunction:
Listing 5-23
1
2
3
4
5
$twig = new Twig_Environment($loader);
$function = new Twig_SimpleFunction('function_name', function () {
// ...
});
$twig->addFunction($function);
Functions support the same features as filters, except for the pre_escape and preserves_safety
options.
Tests
Tests are defined in the exact same way as filters and functions, but you need to create an instance of
Twig_SimpleTest:
Listing 5-24
1
2
3
4
5
$twig = new Twig_Environment($loader);
$test = new Twig_SimpleTest('test_name', function () {
// ...
});
$twig->addTest($test);
Tests allow you to create custom application specific logic for evaluating boolean conditions. As a simple
example, let's create a Twig test that checks if objects are 'red':
Listing 5-25
1
2
$twig = new Twig_Environment($loader);
$test = new Twig_SimpleTest('red', function ($value) {
PDF brought to you by
generated on September 13, 2017
Chapter 5: Extending Twig | 35
3
4
5
6
7
8
9
10
11
if (isset($value->color) && $value->color == 'red') {
return true;
}
if (isset($value->paint) && $value->paint == 'red') {
return true;
}
return false;
});
$twig->addTest($test);
Test functions should always return true/false.
When creating tests you can use the node_class option to provide custom test compilation. This is
useful if your test can be compiled into PHP primitives. This is used by many of the tests built into Twig:
Listing 5-26
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
$twig = new Twig_Environment($loader);
$test = new Twig_SimpleTest(
'odd',
null,
array('node_class' => 'Twig_Node_Expression_Test_Odd'));
$twig->addTest($test);
class Twig_Node_Expression_Test_Odd extends Twig_Node_Expression_Test
{
public function compile(Twig_Compiler $compiler)
{
$compiler
->raw('(')
->subcompile($this->getNode('node'))
->raw(' % 2 == 1')
->raw(')')
;
}
}
The above example shows how you can create tests that use a node class. The node class has access to
one sub-node called 'node'. This sub-node contains the value that is being tested. When the odd filter is
used in code such as:
Listing 5-27
1
{% if my_value is odd %}
The node sub-node will contain an expression of my_value. Node-based tests also have access to the
arguments node. This node will contain the various other arguments that have been provided to your
test.
If you want to pass a variable number of positional or named arguments to the test, set the
is_variadic option to true. Tests also support dynamic name feature as filters and functions.
Tags
One of the most exciting features of a template engine like Twig is the possibility to define new language
constructs. This is also the most complex feature as you need to understand how Twig's internals work.
Let's create a simple set tag that allows the definition of simple variables from within a template. The
tag can be used like follows:
Listing 5-28
1
2
3
4
5
{% set name = "value" %}
{{ name }}
{# should output value #}
PDF brought to you by
generated on September 13, 2017
Chapter 5: Extending Twig | 36
The set tag is part of the Core extension and as such is always available. The built-in version is
slightly more powerful and supports multiple assignments by default (cf. the template designers
chapter for more information).
Three steps are needed to define a new tag:
• Defining a Token Parser class (responsible for parsing the template code);
• Defining a Node class (responsible for converting the parsed code to PHP);
• Registering the tag.
Registering a new tag
Adding a tag is as simple as calling the addTokenParser method on the Twig_Environment
instance:
Listing 5-29
$twig = new Twig_Environment($loader);
$twig->addTokenParser(new Project_Set_TokenParser());
Defining a Token Parser
Now, let's see the actual code of this class:
Listing 5-30
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
class Project_Set_TokenParser extends Twig_TokenParser
{
public function parse(Twig_Token $token)
{
$parser = $this->parser;
$stream = $parser->getStream();
$name = $stream->expect(Twig_Token::NAME_TYPE)->getValue();
$stream->expect(Twig_Token::OPERATOR_TYPE, '=');
$value = $parser->getExpressionParser()->parseExpression();
$stream->expect(Twig_Token::BLOCK_END_TYPE);
return new Project_Set_Node($name, $value, $token->getLine(), $this->getTag());
}
public function getTag()
{
return 'set';
}
}
The getTag() method must return the tag we want to parse, here set.
The parse() method is invoked whenever the parser encounters a set tag. It should return a
Twig_Node instance that represents the node (the Project_Set_Node calls creating is explained in
the next section).
The parsing process is simplified thanks to a bunch of methods you can call from the token stream
($this->parser->getStream()):
•
•
•
getCurrent():
Gets the current token in the stream.
Moves to the next token in the stream, but returns the old one.
test($type), test($value) or test($type, $value): Determines whether the current token is of a particular
type or value (or both). The value may be an array of several possible values.
• expect($type[, $value[, $message]]): If the current token isn't of the given type/value a syntax error is
thrown. Otherwise, if the type and value are correct, the token is returned and the stream moves to
the next token.
• look(): Looks at the next token without consuming it.
next():
PDF brought to you by
generated on September 13, 2017
Chapter 5: Extending Twig | 37
Parsing expressions is done by calling the parseExpression() like we did for the set tag.
Reading the existing TokenParser classes is the best way to learn all the nitty-gritty details of the
parsing process.
Defining a Node
The Project_Set_Node class itself is rather simple:
Listing 5-31
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
class Project_Set_Node extends Twig_Node
{
public function __construct($name, Twig_Node_Expression $value, $line, $tag = null)
{
parent::__construct(array('value' => $value), array('name' => $name), $line, $tag);
}
public function compile(Twig_Compiler $compiler)
{
$compiler
->addDebugInfo($this)
->write('$context[\''.$this->getAttribute('name').'\'] = ')
->subcompile($this->getNode('value'))
->raw(";\n")
;
}
}
The compiler implements a fluid interface and provides methods that helps the developer generate
beautiful and readable PHP code:
•
•
•
•
•
•
•
•
subcompile():
Compiles a node.
Writes the given string as is.
write(): Writes the given string by adding indentation at the beginning of each line.
string(): Writes a quoted string.
repr(): Writes a PHP representation of a given value (see Twig_Node_For for a usage example).
addDebugInfo(): Adds the line of the original template file related to the current node as a comment.
indent(): Indents the generated code (see Twig_Node_Block for a usage example).
outdent(): Outdents the generated code (see Twig_Node_Block for a usage example).
raw():
Creating an Extension
The main motivation for writing an extension is to move often used code into a reusable class like adding
support for internationalization. An extension can define tags, filters, tests, operators, global variables,
functions, and node visitors.
Most of the time, it is useful to create a single extension for your project, to host all the specific tags and
filters you want to add to Twig.
When packaging your code into an extension, Twig is smart enough to recompile your templates
whenever you make a change to it (when auto_reload is enabled).
Before writing your own extensions, have a look at the Twig official extension repository:
http://github.com/twigphp/Twig-extensions.
PDF brought to you by
generated on September 13, 2017
Chapter 5: Extending Twig | 38
An extension is a class that implements the following interface:
Listing 5-32
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
interface Twig_ExtensionInterface
{
/**
* Initializes the runtime environment.
*
* This is where you can load some file that contains filter functions for instance.
*
* @deprecated since 1.23 (to be removed in 2.0), implement Twig_Extension_InitRuntimeInterface instead
*/
function initRuntime(Twig_Environment $environment);
/**
* Returns the token parser instances to add to the existing list.
*
* @return (Twig_TokenParserInterface|Twig_TokenParserBrokerInterface)[]
*/
function getTokenParsers();
/**
* Returns the node visitor instances to add to the existing list.
*
* @return Twig_NodeVisitorInterface[]
*/
function getNodeVisitors();
/**
* Returns a list of filters to add to the existing list.
*
* @return Twig_SimpleFilter[]
*/
function getFilters();
/**
* Returns a list of tests to add to the existing list.
*
* @return Twig_SimpleTest[]
*/
function getTests();
/**
* Returns a list of functions to add to the existing list.
*
* @return Twig_SimpleFunction[]
*/
function getFunctions();
/**
* Returns a list of operators to add to the existing list.
*
* @return array<array> First array of unary operators, second array of binary operators
*/
function getOperators();
/**
* Returns a list of global variables to add to the existing list.
*
* @return array An array of global variables
*
* @deprecated since 1.23 (to be removed in 2.0), implement Twig_Extension_GlobalsInterface instead
*/
function getGlobals();
/**
* Returns the name of the extension.
*
* @return string The extension name
*
* @deprecated since 1.26 (to be removed in 2.0), not used anymore internally
*/
PDF brought to you by
generated on September 13, 2017
Chapter 5: Extending Twig | 39
70
71
function getName();
}
To keep your extension class clean and lean, inherit from the built-in Twig_Extension class instead of
implementing the interface as it provides empty implementations for all methods:
class Project_Twig_Extension extends Twig_Extension { }
Of course, this extension does nothing for now. We will customize it in the next sections.
Prior to Twig 1.26, you must implement the getName() method which must return a unique
identifier for the extension.
Twig does not care where you save your extension on the filesystem, as all extensions must be registered
explicitly to be available in your templates.
You can register an extension by using the addExtension() method on your main Environment
object:
Listing 5-33
$twig = new Twig_Environment($loader);
$twig->addExtension(new Project_Twig_Extension());
The Twig core extensions are great examples of how extensions work.
Globals
Global variables can be registered in an extension via the getGlobals() method:
Listing 5-34
1
2
3
4
5
6
7
8
9
10
11
class Project_Twig_Extension extends Twig_Extension implements Twig_Extension_GlobalsInterface
{
public function getGlobals()
{
return array(
'text' => new Text(),
);
}
// ...
}
Functions
Functions can be registered in an extension via the getFunctions() method:
Listing 5-35
1
2
3
4
5
6
7
8
9
class Project_Twig_Extension extends Twig_Extension
{
public function getFunctions()
{
return array(
new Twig_SimpleFunction('lipsum', 'generate_lipsum'),
);
}
PDF brought to you by
generated on September 13, 2017
Chapter 5: Extending Twig | 40
// ...
10
11
}
Filters
To add a filter to an extension, you need to override the getFilters() method. This method must
return an array of filters to add to the Twig environment:
Listing 5-36
1
2
3
4
5
6
7
8
9
10
11
class Project_Twig_Extension extends Twig_Extension
{
public function getFilters()
{
return array(
new Twig_SimpleFilter('rot13', 'str_rot13'),
);
}
// ...
}
Tags
Adding a tag in an extension can be done by overriding the getTokenParsers() method. This method
must return an array of tags to add to the Twig environment:
Listing 5-37
1
2
3
4
5
6
7
8
9
class Project_Twig_Extension extends Twig_Extension
{
public function getTokenParsers()
{
return array(new Project_Set_TokenParser());
}
// ...
}
In the above code, we have added a single new tag, defined by the Project_Set_TokenParser class.
The Project_Set_TokenParser class is responsible for parsing the tag and compiling it to PHP.
Operators
The getOperators() methods lets you add new operators. Here is how to add !, ||, and &&
operators:
Listing 5-38
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
class Project_Twig_Extension extends Twig_Extension
{
public function getOperators()
{
return array(
array(
'!' => array('precedence' => 50, 'class' => 'Twig_Node_Expression_Unary_Not'),
),
array(
'||' => array('precedence' => 10, 'class' => 'Twig_Node_Expression_Binary_Or',
'associativity' => Twig_ExpressionParser::OPERATOR_LEFT),
'&&' => array('precedence' => 15, 'class' => 'Twig_Node_Expression_Binary_And',
'associativity' => Twig_ExpressionParser::OPERATOR_LEFT),
),
);
}
PDF brought to you by
generated on September 13, 2017
Chapter 5: Extending Twig | 41
// ...
}
Tests
The getTests() method lets you add new test functions:
Listing 5-39
1
2
3
4
5
6
7
8
9
10
11
class Project_Twig_Extension extends Twig_Extension
{
public function getTests()
{
return array(
new Twig_SimpleTest('even', 'twig_test_even'),
);
}
// ...
}
Definition vs Runtime
Twig filters, functions, and tests runtime implementations can be defined as any valid PHP callable:
• functions/static methods: Simple to implement and fast (used by all Twig core extensions); but it
is hard for the runtime to depend on external objects;
• closures: Simple to implement;
• object methods: More flexible and required if your runtime code depends on external objects.
The simplest way to use methods is to define them on the extension itself:
Listing 5-40
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
class Project_Twig_Extension extends Twig_Extension
{
private $rot13Provider;
public function __construct($rot13Provider)
{
$this->rot13Provider = $rot13Provider;
}
public function getFunctions()
{
return array(
new Twig_SimpleFunction('rot13', array($this, 'rot13')),
);
}
public function rot13($value)
{
return $rot13Provider->rot13($value);
}
}
This is very convenient but not recommended as it makes template compilation depend on runtime
dependencies even if they are not needed (think for instance as a dependency that connects to a database
engine).
As of Twig 1.26, you can easily decouple the extension definitions from their runtime implementations
by registering a Twig_RuntimeLoaderInterface instance on the environment that knows how to
instantiate such runtime classes (runtime classes must be autoload-able):
Listing 5-41
1
2
class RuntimeLoader implements Twig_RuntimeLoaderInterface
{
PDF brought to you by
generated on September 13, 2017
Chapter 5: Extending Twig | 42
3
4
5
6
7
8
9
10
11
12
13
14
15
16
public
{
//
//
//
if
function load($class)
implement the logic to create an instance of $class
and inject its dependencies
most of the time, it means using your dependency injection container
('Project_Twig_RuntimeExtension' === $class) {
return new $class(new Rot13Provider());
} else {
// ...
}
}
}
$twig->addRuntimeLoader(new RuntimeLoader());
As of Twig 1.32, Twig comes with a PSR-11
(Twig_ContainerRuntimeLoader) that works on PHP 5.3+.
compatible
runtime
loader
It is now possible to move the runtime logic to a new Project_Twig_RuntimeExtension class and
use it directly in the extension:
Listing 5-42
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
class Project_Twig_RuntimeExtension
{
private $rot13Provider;
public function __construct($rot13Provider)
{
$this->rot13Provider = $rot13Provider;
}
public function rot13($value)
{
return $rot13Provider->rot13($value);
}
}
class Project_Twig_Extension extends Twig_Extension
{
public function getFunctions()
{
return array(
new Twig_SimpleFunction('rot13', array('Project_Twig_RuntimeExtension', 'rot13')),
// or
new Twig_SimpleFunction('rot13', 'Project_Twig_RuntimeExtension::rot13'),
);
}
}
Overloading
To overload an already defined filter, test, operator, global variable, or function, re-define it in an
extension and register it as late as possible (order matters):
Listing 5-43
1
2
3
4
5
6
7
8
9
class MyCoreExtension extends Twig_Extension
{
public function getFilters()
{
return array(
new Twig_SimpleFilter('date', array($this, 'dateFilter')),
);
}
PDF brought to you by
generated on September 13, 2017
Chapter 5: Extending Twig | 43
10
11
12
13
14
15
16
17
public function dateFilter($timestamp, $format = 'F j, Y H:i')
{
// do something different from the built-in date filter
}
}
$twig = new Twig_Environment($loader);
$twig->addExtension(new MyCoreExtension());
Here, we have overloaded the built-in date filter with a custom one.
If you do the same on the Twig_Environment itself, beware that it takes precedence over any other
registered extensions:
Listing 5-44
1
2
3
4
5
6
7
$twig = new Twig_Environment($loader);
$twig->addFilter(new Twig_SimpleFilter('date', function ($timestamp, $format = 'F j, Y H:i') {
// do something different from the built-in date filter
}));
// the date filter will come from the above registration, not
// from the registered extension below
$twig->addExtension(new MyCoreExtension());
Note that overloading the built-in Twig elements is not recommended as it might be confusing.
Testing an Extension
Functional Tests
You can create functional tests for extensions simply by creating the following file structure in your test
directory:
Listing 5-45
1
2
3
4
5
6
7
8
9
10
11
Fixtures/
filters/
foo.test
bar.test
functions/
foo.test
bar.test
tags/
foo.test
bar.test
IntegrationTest.php
The IntegrationTest.php file should look like this:
Listing 5-46
1
2
3
4
5
6
7
8
9
10
11
12
13
class Project_Tests_IntegrationTest extends Twig_Test_IntegrationTestCase
{
public function getExtensions()
{
return array(
new Project_Twig_Extension1(),
new Project_Twig_Extension2(),
);
}
public function getFixturesDir()
{
return dirname(__FILE__).'/Fixtures/';
PDF brought to you by
generated on September 13, 2017
Chapter 5: Extending Twig | 44
14
15
}
}
Fixtures examples can be found within the Twig repository tests/Twig/Fixtures1 directory.
Node Tests
Testing the node visitors can be complex, so extend your test cases from Twig_Test_NodeTestCase.
Examples can be found in the Twig repository tests/Twig/Node2 directory.
1. https://github.com/twigphp/Twig/tree/master/test/Twig/Tests/Fixtures
2. https://github.com/twigphp/Twig/tree/master/test/Twig/Tests/Node
PDF brought to you by
generated on September 13, 2017
Chapter 5: Extending Twig | 45
Chapter 6
Twig Internals
Twig is very extensible and you can easily hack it. Keep in mind that you should probably try to create an
extension before hacking the core, as most features and enhancements can be handled with extensions.
This chapter is also useful for people who want to understand how Twig works under the hood.
How does Twig work?
The rendering of a Twig template can be summarized into four key steps:
• Load the template: If the template is already compiled, load it and go to the evaluation step,
otherwise:
• First, the lexer tokenizes the template source code into small pieces for easier processing;
• Then, the parser converts the token stream into a meaningful tree of nodes (the Abstract
Syntax Tree);
• Eventually, the compiler transforms the AST into PHP code.
• Evaluate the template: It basically means calling the display() method of the compiled template and
passing it the context.
The Lexer
The lexer tokenizes a template source code into a token stream (each token is an instance of
Twig_Token, and the stream is an instance of Twig_TokenStream). The default lexer recognizes 13
different token types:
•
•
•
•
•
•
•
Twig_Token::BLOCK_START_TYPE, Twig_Token::BLOCK_END_TYPE:
Delimiters for blocks ({% %})
Delimiters for variables ({{ }})
Twig_Token::TEXT_TYPE: A text outside an expression;
Twig_Token::NAME_TYPE: A name in an expression;
Twig_Token::NUMBER_TYPE: A number in an expression;
Twig_Token::STRING_TYPE: A string in an expression;
Twig_Token::OPERATOR_TYPE: An operator;
Twig_Token::VAR_START_TYPE, Twig_Token::VAR_END_TYPE:
PDF brought to you by
generated on September 13, 2017
Chapter 6: Twig Internals | 46
•
•
Twig_Token::PUNCTUATION_TYPE:
A punctuation sign;
Twig_Token::INTERPOLATION_START_TYPE, Twig_Token::INTERPOLATION_END_TYPE
(as of Twig 1.5): Delimiters for
string interpolation;
• Twig_Token::EOF_TYPE: Ends of template.
You can manually convert a source code into a token stream by calling the tokenize() method of an
environment:
Listing 6-1
$stream = $twig->tokenize(new Twig_Source($source, $identifier));
New in version 1.27: Twig_Source was introduced in version 1.27, pass the source and the identifier
directly on previous versions.
As the stream has a __toString() method, you can have a textual representation of it by echoing the
object:
Listing 6-2
echo $stream."\n";
Here is the output for the Hello {{ name }} template:
Listing 6-3
1
2
3
4
5
TEXT_TYPE(Hello )
VAR_START_TYPE()
NAME_TYPE(name)
VAR_END_TYPE()
EOF_TYPE()
The default lexer (Twig_Lexer) can be changed by calling the setLexer() method:
Listing 6-4
$twig->setLexer($lexer);
The Parser
The parser converts the token stream into an AST (Abstract Syntax Tree), or a node tree (an instance of
Twig_Node_Module). The core extension defines the basic nodes like: for, if, ... and the expression
nodes.
You can manually convert a token stream into a node tree by calling the parse() method of an
environment:
Listing 6-5
$nodes = $twig->parse($stream);
Echoing the node object gives you a nice representation of the tree:
Listing 6-6
echo $nodes."\n";
Here is the output for the Hello {{ name }} template:
Listing 6-7
1
2
3
4
5
6
Twig_Node_Module(
Twig_Node_Text(Hello )
Twig_Node_Print(
Twig_Node_Expression_Name(name)
)
)
The default parser (Twig_TokenParser) can be changed by calling the setParser() method:
Listing 6-8
$twig->setParser($parser);
PDF brought to you by
generated on September 13, 2017
Chapter 6: Twig Internals | 47
The Compiler
The last step is done by the compiler. It takes a node tree as an input and generates PHP code usable for
runtime execution of the template.
You can manually compile a node tree to PHP code with the compile() method of an environment:
Listing 6-9
$php = $twig->compile($nodes);
The generated template for a Hello {{ name }} template reads as follows (the actual output can
differ depending on the version of Twig you are using):
Listing 6-10
1
2
3
4
5
6
7
8
9
10
11
12
/* Hello {{ name }} */
class __TwigTemplate_1121b6f109fe93ebe8c6e22e3712bceb extends Twig_Template
{
protected function doDisplay(array $context, array $blocks = array())
{
// line 1
echo "Hello ";
echo twig_escape_filter($this->env, (isset($context["name"]) ? $context["name"] : null), "html",
null, true);
}
// some more code
}
The default compiler (Twig_Compiler) can be changed by calling the setCompiler() method:
Listing 6-11
$twig->setCompiler($compiler);
PDF brought to you by
generated on September 13, 2017
Chapter 6: Twig Internals | 48
Chapter 7
Deprecated Features
This document lists all deprecated features in Twig. Deprecated features are kept for backward
compatibility and removed in the next major release (a feature that was deprecated in Twig 1.x is
removed in Twig 2.0).
Deprecation Notices
As of Twig 1.21, Twig generates deprecation notices when a template uses deprecated features. See
Displaying Deprecation Notices for more information.
Macros
As of Twig 2.0, macros imported in a file are not available in child templates anymore (via an include
call for instance). You need to import macros explicitly in each file where you are using them.
Token Parsers
• As of Twig 1.x, the token parser broker sub-system is deprecated. The following class and interface
will be removed in 2.0:
•
•
Twig_TokenParserBrokerInterface
Twig_TokenParserBroker
• As of Twig 1.27,
is deprecated. From a token parser, use
>getStream()->getSourceContext()->getPath() instead.
• As of Twig 1.27, Twig_Parser::getEnvironment() is deprecated.
Twig_Parser::getFilename()
PDF brought to you by
generated on September 13, 2017
$this->parser-
Chapter 7: Deprecated Features | 49
Extensions
• As
of
Twig
1.x,
the
ability to remove an extension is deprecated and the
method will be removed in 2.0.
• As of Twig 1.23, the Twig_ExtensionInterface::initRuntime() method is deprecated. You have two
options to avoid the deprecation notice: if you implement this method to store the environment
for your custom filters, functions, or tests, use the needs_environment option instead; if you have more
complex needs, explicitly implement Twig_Extension_InitRuntimeInterface (not recommended).
• As of Twig 1.23, the Twig_ExtensionInterface::getGlobals() method is deprecated. Implement
Twig_Extension_GlobalsInterface to avoid deprecation notices.
• As of Twig 1.26, the Twig_ExtensionInterface::getName() method is deprecated and it is not used
internally anymore.
Twig_Environment::removeExtension()
PEAR
PEAR support has been discontinued in Twig 1.15.1, and no PEAR packages are provided anymore. Use
Composer instead.
Filters
• As of Twig 1.x, use
removed in 2.0:
•
•
•
•
•
•
Twig_SimpleFilter
to add a filter. The following classes and interfaces will be
Twig_FilterInterface
Twig_FilterCallableInterface
Twig_Filter
Twig_Filter_Function
Twig_Filter_Method
Twig_Filter_Node
• As of Twig 2.x, the Twig_SimpleFilter class is deprecated and will be removed in Twig 3.x (use
Twig_Filter instead). In Twig 2.x, Twig_SimpleFilter is just an alias for Twig_Filter.
Functions
• As of Twig 1.x, use Twig_SimpleFunction to add a function. The following classes and interfaces will be
removed in 2.0:
•
•
•
•
•
•
Twig_FunctionInterface
Twig_FunctionCallableInterface
Twig_Function
Twig_Function_Function
Twig_Function_Method
Twig_Function_Node
• As of Twig 2.x, the Twig_SimpleFunction class is deprecated and will be removed in Twig 3.x (use
Twig_Function instead). In Twig 2.x, Twig_SimpleFunction is just an alias for Twig_Function.
PDF brought to you by
generated on September 13, 2017
Chapter 7: Deprecated Features | 50
Tests
• As of Twig 1.x, use Twig_SimpleTest to add a test. The following classes and interfaces will be removed
in 2.0:
•
•
•
•
•
•
Twig_TestInterface
Twig_TestCallableInterface
Twig_Test
Twig_Test_Function
Twig_Test_Method
Twig_Test_Node
• As of Twig 2.x, the Twig_SimpleTest class is deprecated and will be removed in Twig 3.x (use Twig_Test
instead). In Twig 2.x, Twig_SimpleTest is just an alias for Twig_Test.
• The sameas and divisibleby tests are deprecated in favor of same as and divisible by respectively.
Tags
• As of Twig 1.x, the raw tag is deprecated. You should use verbatim instead.
Nodes
• As of Twig 1.x, Node::toXml() is deprecated and will be removed in Twig 2.0.
• As of Twig 1.26, Node::$nodes should only contains Twig_Node instances, storing a null value is
deprecated and won't be possible in Twig 2.x.
• As of Twig 1.27, the filename attribute on Twig_Node_Module is deprecated. Use getName() instead.
• As of Twig 1.27, the Twig_Node::getFilename()/Twig_Node::getLine() methods are deprecated, use
Twig_Node::getTemplateName()/Twig_Node::getTemplateLine() instead.
Interfaces
• As of Twig 2.x, the following interfaces are deprecated and empty (they will be removed in Twig
3.0):
• Twig_CompilerInterface (use Twig_Compiler instead)
• Twig_LexerInterface (use Twig_Lexer instead)
• Twig_NodeInterface (use Twig_Node instead)
• Twig_ParserInterface (use Twig_Parser instead)
• Twig_ExistsLoaderInterface (merged with Twig_LoaderInterface)
• Twig_SourceContextLoaderInterface (merged with Twig_LoaderInterface)
• Twig_TemplateInterface
(use
Twig_Template
instead,
and
use
those
constants
Twig_Template::ANY_CALL,
Twig_Template::ARRAY_CALL,
Twig_Template::METHOD_CALL)
Compiler
• As of Twig 1.26, the Twig_Compiler::getFilename() has been deprecated. You should not use it anyway
as its values is not reliable.
• As of Twig 1.27, the Twig_Compiler::addIndentation() has been deprecated. Use Twig_Compiler::write('')
instead.
PDF brought to you by
generated on September 13, 2017
Chapter 7: Deprecated Features | 51
Loaders
• As of Twig 1.x, Twig_Loader_String is deprecated and will be removed in 2.0. You can render a string
via Twig_Environment::createTemplate().
• As
of
Twig
1.27,
Twig_LoaderInterface::getSource()
is
deprecated.
Implement
Twig_SourceContextLoaderInterface instead and use getSourceContext().
Node Visitors
• Because of the removal of Twig_NodeInterface in 2.0, you need to extend Twig_BaseNodeVisitor instead
of implementing Twig_NodeVisitorInterface directly to make your node visitors compatible with both
Twig 1.x and 2.x.
Globals
• As of Twig 2.x, the ability to register a global variable after the runtime or the extensions have
been initialized is not possible anymore (but changing the value of an already registered global is
possible).
• As of Twig 1.x, using the _self global variable to get access to the current Twig_Template instance is
deprecated; most usages only need the current template name, which will continue to work in Twig
2.0. In Twig 2.0, _self returns the current template name instead of the current Twig_Template instance.
If you are using {{ _self.templateName }}, just replace it with {{ _self }}.
Miscellaneous
• As
of
Twig
1.x,
Twig_Environment::clearTemplateCache(),
Twig_Environment::clearCacheFiles(),
Twig_Environment::writeCacheFile(),
Twig_Environment::getCacheFilename(),
Twig_Environment::getTemplateClassPrefix(), Twig_Environment::getLexer(), Twig_Environment::getParser(),
and
are deprecated and will be removed in 2.0.
As of Twig 1.x, Twig_Template::getEnvironment() and Twig_TemplateInterface::getEnvironment() are
deprecated and will be removed in 2.0.
As of Twig 1.21, setting the environment option autoescape to true is deprecated and will be removed
in 2.0. Use "html" instead.
As of Twig 1.27, Twig_Error::getTemplateFile() and Twig_Error::setTemplateFile() are deprecated. Use
Twig_Error::getTemplateName() and Twig_Error::setTemplateName() instead.
As of Twig 1.27, Twig_Template::getSource() is deprecated. Use Twig_Template::getSourceContext() instead.
As of Twig 1.27, Twig_Parser::addHandler() and Twig_Parser::addNodeVisitor() are deprecated and will be
removed in 2.0.
As of Twig 1.29, some classes are marked as being final via the @final annotation. Those classes
will be marked as final in 2.0.
Twig_Environment::getCompiler()
•
•
•
•
•
•
PDF brought to you by
generated on September 13, 2017
Chapter 7: Deprecated Features | 52
Chapter 8
Recipes
Displaying Deprecation Notices
New in version 1.21: This works as of Twig 1.21.
Deprecated features generate deprecation notices (via a call to the trigger_error() PHP function).
By default, they are silenced and never displayed nor logged.
To easily remove all deprecated feature usages from your templates, write and run a script along the lines
of the following:
Listing 8-1
1
2
3
4
5
6
7
require_once __DIR__.'/vendor/autoload.php';
$twig = create_your_twig_env();
$deprecations = new Twig_Util_DeprecationCollector($twig);
print_r($deprecations->collectDir(__DIR__.'/templates'));
The collectDir() method compiles all templates found in a directory, catches deprecation notices,
and return them.
If your templates are not stored on the filesystem, use the collect() method instead. collect()
takes a Traversable which must return template names as keys and template contents as values
(as done by Twig_Util_TemplateDirIterator).
However, this code won't find all deprecations (like using deprecated some Twig classes). To catch all
notices, register a custom error handler like the one below:
Listing 8-2
1
2
3
4
5
6
7
$deprecations = array();
set_error_handler(function ($type, $msg) use (&$deprecations) {
if (E_USER_DEPRECATED === $type) {
$deprecations[] = $msg;
}
});
PDF brought to you by
generated on September 13, 2017
Chapter 8: Recipes | 53
8
9
10
// run your application
print_r($deprecations);
Note that most deprecation notices are triggered during compilation, so they won't be generated when
templates are already cached.
If you want to manage the deprecation notices from your PHPUnit tests, have a look at the symfony/
phpunit-bridge1 package, which eases the process a lot.
Making a Layout conditional
Working with Ajax means that the same content is sometimes displayed as is, and sometimes decorated
with a layout. As Twig layout template names can be any valid expression, you can pass a variable that
evaluates to true when the request is made via Ajax and choose the layout accordingly:
Listing 8-3
1
2
3
4
5
{% extends request.ajax ? "base_ajax.html" : "base.html" %}
{% block content %}
This is the content to be displayed.
{% endblock %}
Making an Include dynamic
When including a template, its name does not need to be a string. For instance, the name can depend on
the value of a variable:
Listing 8-4
1
{% include var ~ '_foo.html' %}
If var evaluates to index, the index_foo.html template will be rendered.
As a matter of fact, the template name can be any valid expression, such as the following:
Listing 8-5
1
{% include var|default('index') ~ '_foo.html' %}
Overriding a Template that also extends itself
A template can be customized in two different ways:
• Inheritance: A template extends a parent template and overrides some blocks;
• Replacement: If you use the filesystem loader, Twig loads the first template it finds in a list of
configured directories; a template found in a directory replaces another one from a directory further
in the list.
But how do you combine both: replace a template that also extends itself (aka a template in a directory
further in the list)?
1. https://github.com/symfony/phpunit-bridge
PDF brought to you by
generated on September 13, 2017
Chapter 8: Recipes | 54
Let's say that your templates are loaded from both .../templates/mysite and .../templates/
default in this order. The page.twig template, stored in .../templates/default reads as
follows:
Listing 8-6
{# page.twig #}
{% extends "layout.twig" %}
1
2
3
4
5
{% block content %}
{% endblock %}
You can replace this template by putting a file with the same name in .../templates/mysite. And
if you want to extend the original template, you might be tempted to write the following:
Listing 8-7
{# page.twig in .../templates/mysite #}
{% extends "page.twig" %} {# from .../templates/default #}
1
2
Of course, this will not work as Twig will always load the template from .../templates/mysite.
It turns out it is possible to get this to work, by adding a directory right at the end of your template
directories, which is the parent of all of the other directories: .../templates in our case. This has the
effect of making every template file within our system uniquely addressable. Most of the time you will
use the "normal" paths, but in the special case of wanting to extend a template with an overriding version
of itself we can reference its parent's full, unambiguous template path in the extends tag:
Listing 8-8
{# page.twig in .../templates/mysite #}
{% extends "default/page.twig" %} {# from .../templates #}
1
2
This recipe was inspired by the following Django wiki page: http://code.djangoproject.com/wiki/
ExtendingTemplates
Customizing the Syntax
Twig allows some syntax customization for the block delimiters. It's not recommended to use this feature
as templates will be tied with your custom syntax. But for specific projects, it can make sense to change
the defaults.
To change the block delimiters, you need to create your own lexer object:
Listing 8-9
1
2
3
4
5
6
7
8
9
$twig = new Twig_Environment();
$lexer = new Twig_Lexer($twig, array(
'tag_comment' => array('{#', '#}'),
'tag_block'
=> array('{%', '%}'),
'tag_variable' => array('{{', '}}'),
'interpolation' => array('#{', '}'),
));
$twig->setLexer($lexer);
Here are some configuration example that simulates some other template engines syntax:
Listing 8-10
1
2
3
4
5
6
7
8
// Ruby erb syntax
$lexer = new Twig_Lexer($twig, array(
'tag_comment' => array('<%#', '%>'),
'tag_block'
=> array('<%', '%>'),
'tag_variable' => array('<%=', '%>'),
));
// SGML Comment Syntax
PDF brought to you by
generated on September 13, 2017
Chapter 8: Recipes | 55
9
10
11
12
13
14
15
16
17
18
19
20
$lexer = new Twig_Lexer($twig, array(
'tag_comment' => array('<!--#', '-->'),
'tag_block'
=> array('<!--', '-->'),
'tag_variable' => array('${', '}'),
));
// Smarty like
$lexer = new Twig_Lexer($twig, array(
'tag_comment' => array('{*', '*}'),
'tag_block'
=> array('{', '}'),
'tag_variable' => array('{$', '}'),
));
Using dynamic Object Properties
When Twig encounters a variable like article.title, it tries to find a title public property in the
article object.
It also works if the property does not exist but is rather defined dynamically thanks to the magic
__get() method; you just need to also implement the __isset() magic method like shown in the
following snippet of code:
Listing 8-11
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
class Article
{
public function __get($name)
{
if ('title' == $name) {
return 'The title';
}
// throw some kind of error
}
public function __isset($name)
{
if ('title' == $name) {
return true;
}
return false;
}
}
Accessing the parent Context in Nested Loops
Sometimes, when using nested loops, you need to access the parent context. The parent context is always
accessible via the loop.parent variable. For instance, if you have the following template data:
Listing 8-12
1
2
3
4
5
6
$data = array(
'topics' => array(
'topic1' => array('Message 1 of topic 1', 'Message 2 of topic 1'),
'topic2' => array('Message 1 of topic 2', 'Message 2 of topic 2'),
),
);
And the following template to display all messages in all topics:
Listing 8-13
1
2
{% for topic, messages in topics %}
* {{ loop.index }}: {{ topic }}
PDF brought to you by
generated on September 13, 2017
Chapter 8: Recipes | 56
3
4
5
6
{% for message in messages %}
- {{ loop.parent.loop.index }}.{{ loop.index }}: {{ message }}
{% endfor %}
{% endfor %}
The output will be similar to:
Listing 8-14
1
2
3
4
5
6
* 1: topic1
- 1.1: The
- 1.2: The
* 2: topic2
- 2.1: The
- 2.2: The
message 1 of topic 1
message 2 of topic 1
message 1 of topic 2
message 2 of topic 2
In the inner loop, the loop.parent variable is used to access the outer context. So, the index of the
current topic defined in the outer for loop is accessible via the loop.parent.loop.index variable.
Defining undefined Functions and Filters on the Fly
When a function (or a filter) is not defined, Twig defaults to throw a Twig_Error_Syntax exception.
However, it can also call a callback2 (any valid PHP callable) which should return a function (or a filter).
For filters, register callbacks with registerUndefinedFilterCallback(). For functions, use
registerUndefinedFunctionCallback():
Listing 8-15
1
2
3
4
5
6
7
8
9
// auto-register all native PHP functions as Twig functions
// don't try this at home as it's not secure at all!
$twig->registerUndefinedFunctionCallback(function ($name) {
if (function_exists($name)) {
return new Twig_SimpleFunction($name, $name);
}
return false;
});
If the callable is not able to return a valid function (or filter), it must return false.
If you register more than one callback, Twig will call them in turn until one does not return false.
As the resolution of functions and filters is done during compilation, there is no overhead when
registering these callbacks.
Validating the Template Syntax
When template code is provided by a third-party (through a web interface for instance), it might be
interesting to validate the template syntax before saving it. If the template code is stored in a $template
variable, here is how you can do it:
Listing 8-16
1
2
3
4
5
try {
$twig->parse($twig->tokenize(new Twig_Source($template)));
// the $template is valid
} catch (Twig_Error_Syntax $e) {
2. http://www.php.net/manual/en/function.is-callable.php
PDF brought to you by
generated on September 13, 2017
Chapter 8: Recipes | 57
6
7
// $template contains one or more syntax errors
}
If you iterate over a set of files, you can pass the filename to the tokenize() method to get the filename
in the exception message:
Listing 8-17
1
2
3
4
5
6
7
8
9
foreach ($files as $file) {
try {
$twig->parse($twig->tokenize(new Twig_Source($template, $file->getFilename(), $file)));
// the $template is valid
} catch (Twig_Error_Syntax $e) {
// $template contains one or more syntax errors
}
}
New in version 1.27: Twig_Source was introduced in version 1.27, pass the source and the identifier
directly on previous versions.
This method won't catch any sandbox policy violations because the policy is enforced during
template rendering (as Twig needs the context for some checks like allowed methods on objects).
Refreshing modified Templates when OPcache or APC is enabled
When using OPcache with opcache.validate_timestamps set to 0 or APC with apc.stat set to
0 and Twig cache enabled, clearing the template cache won't update the cache.
To get around this, force Twig to invalidate the bytecode cache:
Listing 8-18
$twig = new Twig_Environment($loader, array(
'cache' => new Twig_Cache_Filesystem('/some/cache/path', Twig_Cache_Filesystem::FORCE_BYTECODE_INVALIDATION),
// ...
));
Before Twig 1.22, you should extend Twig_Environment instead:
Listing 8-19
1
2
3
4
5
6
7
8
9
10
11
12
13
14
class OpCacheAwareTwigEnvironment extends Twig_Environment
{
protected function writeCacheFile($file, $content)
{
parent::writeCacheFile($file, $content);
// Compile cached file into bytecode cache
if (function_exists('opcache_invalidate')) {
opcache_invalidate($file, true);
} elseif (function_exists('apc_compile_file')) {
apc_compile_file($file);
}
}
}
Reusing a stateful Node Visitor
When attaching a visitor to a Twig_Environment instance, Twig uses it to visit all templates it
compiles. If you need to keep some state information around, you probably want to reset it when visiting
a new template.
PDF brought to you by
generated on September 13, 2017
Chapter 8: Recipes | 58
This can be easily achieved with the following code:
Listing 8-20
1
2
3
4
5
6
7
8
9
10
11
12
13
protected $someTemplateState = array();
public function enterNode(Twig_NodeInterface $node, Twig_Environment $env)
{
if ($node instanceof Twig_Node_Module) {
// reset the state as we are entering a new template
$this->someTemplateState = array();
}
// ...
return $node;
}
Using a Database to store Templates
If you are developing a CMS, templates are usually stored in a database. This recipe gives you a simple
PDO template loader you can use as a starting point for your own.
First, let's create a temporary in-memory SQLite3 database to work with:
Listing 8-21
1
2
3
4
5
6
7
8
9
10
$dbh = new PDO('sqlite::memory:');
$dbh->exec('CREATE TABLE templates (name STRING, source STRING, last_modified INTEGER)');
$base = '{% block content %}{% endblock %}';
$index = '
{% extends "base.twig" %}
{% block content %}Hello {{ name }}{% endblock %}
';
$now = time();
$dbh->exec("INSERT INTO templates (name, source, last_modified) VALUES ('base.twig', '$base', $now)");
$dbh->exec("INSERT INTO templates (name, source, last_modified) VALUES ('index.twig', '$index', $now)");
We have created a simple templates table that hosts two templates: base.twig and index.twig.
Now, let's define a loader able to use this database:
Listing 8-22
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
class DatabaseTwigLoader implements Twig_LoaderInterface, Twig_ExistsLoaderInterface,
Twig_SourceContextLoaderInterface
{
protected $dbh;
public function __construct(PDO $dbh)
{
$this->dbh = $dbh;
}
public function getSource($name)
{
if (false === $source = $this->getValue('source', $name)) {
throw new Twig_Error_Loader(sprintf('Template "%s" does not exist.', $name));
}
return $source;
}
// Twig_SourceContextLoaderInterface as of Twig 1.27
public function getSourceContext($name)
{
if (false === $source = $this->getValue('source', $name)) {
throw new Twig_Error_Loader(sprintf('Template "%s" does not exist.', $name));
}
return new Twig_Source($source, $name);
}
PDF brought to you by
generated on September 13, 2017
Chapter 8: Recipes | 59
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
// Twig_ExistsLoaderInterface as of Twig 1.11
public function exists($name)
{
return $name === $this->getValue('name', $name);
}
public function getCacheKey($name)
{
return $name;
}
public function isFresh($name, $time)
{
if (false === $lastModified = $this->getValue('last_modified', $name)) {
return false;
}
return $lastModified <= $time;
}
protected function getValue($column, $name)
{
$sth = $this->dbh->prepare('SELECT '.$column.' FROM templates WHERE name = :name');
$sth->execute(array(':name' => (string) $name));
return $sth->fetchColumn();
}
}
Finally, here is an example on how you can use it:
Listing 8-23
$loader = new DatabaseTwigLoader($dbh);
$twig = new Twig_Environment($loader);
echo $twig->render('index.twig', array('name' => 'Fabien'));
Using different Template Sources
This recipe is the continuation of the previous one. Even if you store the contributed templates in a
database, you might want to keep the original/base templates on the filesystem. When templates can be
loaded from different sources, you need to use the Twig_Loader_Chain loader.
As you can see in the previous recipe, we reference the template in the exact same way as we would have
done it with a regular filesystem loader. This is the key to be able to mix and match templates coming
from the database, the filesystem, or any other loader for that matter: the template name should be a
logical name, and not the path from the filesystem:
Listing 8-24
1
2
3
4
5
6
7
8
9
$loader1 = new DatabaseTwigLoader($dbh);
$loader2 = new Twig_Loader_Array(array(
'base.twig' => '{% block content %}{% endblock %}',
));
$loader = new Twig_Loader_Chain(array($loader1, $loader2));
$twig = new Twig_Environment($loader);
echo $twig->render('index.twig', array('name' => 'Fabien'));
Now that the base.twig templates is defined in an array loader, you can remove it from the database,
and everything else will still work as before.
PDF brought to you by
generated on September 13, 2017
Chapter 8: Recipes | 60
Loading a Template from a String
From a template, you can easily load a template stored in a string via the template_from_string
function (available as of Twig 1.11 via the Twig_Extension_StringLoader extension):
Listing 8-25
1
{{ include(template_from_string("Hello {{ name }}")) }}
From
PHP,
it's
also
possible
to
load
a
template
stored
in
a
string
via
Twig_Environment::createTemplate() (available as of Twig 1.18):
Listing 8-26
$template = $twig->createTemplate('hello {{ name }}');
echo $template->render(array('name' => 'Fabien'));
Never use the Twig_Loader_String loader, which has severe limitations.
Using Twig and AngularJS in the same Templates
Mixing different template syntaxes in the same file is not a recommended practice as both AngularJS and
Twig use the same delimiters in their syntax: {{ and }}.
Still, if you want to use AngularJS and Twig in the same template, there are two ways to make it work
depending on the amount of AngularJS you need to include in your templates:
• Escaping the AngularJS delimiters by wrapping AngularJS sections with the {% verbatim %} tag
or by escaping each delimiter via {{ '{{' }} and {{ '}}' }};
• Changing the delimiters of one of the template engines (depending on which engine you introduced
last):
• For AngularJS, change the interpolation tags using the interpolateProvider service, for
instance at the module initialization time:
Listing 8-27
1
2
3
angular.module('myApp', []).config(function($interpolateProvider) {
$interpolateProvider.startSymbol('{[').endSymbol(']}');
});
• For Twig, change the delimiters via the tag_variable Lexer option:
Listing 8-28
1
2
3
$env->setLexer(new Twig_Lexer($env, array(
'tag_variable' => array('{[', ']}'),
)));
PDF brought to you by
generated on September 13, 2017
Chapter 8: Recipes | 61
Chapter 9
Coding Standards
When writing Twig templates, we recommend you to follow these official coding standards:
• Put one (and only one) space after the start of a delimiter ({{, {%, and {#) and before the end of a
delimiter (}}, %}, and #}):
Listing 9-1
1
2
3
{{ foo }}
{# comment #}
{% if foo %}{% endif %}
When using the whitespace control character, do not put any spaces between it and the delimiter:
Listing 9-2
1
2
3
{{- foo -}}
{#- comment -#}
{%- if foo -%}{%- endif -%}
• Put one (and only one) space before and after the following operators: comparison operators (==,
!=, <, >, >=, <=), math operators (+, -, /, *, %, //, **), logic operators (not, and, or), ~, is, in,
and the ternary operator (?:):
Listing 9-3
1
2
3
{{ 1 + 2 }}
{{ foo ~ bar }}
{{ true ? true : false }}
• Put one (and only one) space after the : sign in hashes and , in arrays and hashes:
Listing 9-4
1
2
{{ [1, 2, 3] }}
{{ {'foo': 'bar'} }}
• Do not put any spaces after an opening parenthesis and before a closing parenthesis in expressions:
Listing 9-5
1
{{ 1 + (2 * 3) }}
• Do not put any spaces before and after string delimiters:
Listing 9-6
1
2
{{ 'foo' }}
{{ "foo" }}
PDF brought to you by
generated on September 13, 2017
Chapter 9: Coding Standards | 62
• Do not put any spaces before and after the following operators: |, ., .., []:
Listing 9-7
1
2
3
4
{{
{{
{{
{%
foo|upper|lower }}
user.name }}
user[name] }}
for i in 1..12 %}{% endfor %}
• Do not put any spaces before and after the parenthesis used for filter and function calls:
Listing 9-8
1
2
{{ foo|default('foo') }}
{{ range(1..10) }}
• Do not put any spaces before and after the opening and the closing of arrays and hashes:
Listing 9-9
1
2
{{ [1, 2, 3] }}
{{ {'foo': 'bar'} }}
• Use lower cased and underscored variable names:
Listing 9-10
1
2
{% set foo = 'foo' %}
{% set foo_bar = 'foo' %}
• Indent your code inside tags (use the same indentation as the one used for the target language of the
rendered template):
Listing 9-11
1
2
3
4
5
{% block foo %}
{% if true %}
true
{% endif %}
{% endblock %}
PDF brought to you by
generated on September 13, 2017
Chapter 9: Coding Standards | 63
Chapter 10
autoescape
Whether automatic escaping is enabled or not, you can mark a section of a template to be escaped or not
by using the autoescape tag:
Listing 10-1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
{% autoescape %}
Everything will be automatically escaped in this block
using the HTML strategy
{% endautoescape %}
{% autoescape 'html' %}
Everything will be automatically escaped in this block
using the HTML strategy
{% endautoescape %}
{% autoescape 'js' %}
Everything will be automatically escaped in this block
using the js escaping strategy
{% endautoescape %}
{% autoescape false %}
Everything will be outputted as is in this block
{% endautoescape %}
Before Twig 1.8, the syntax was different:
Listing 10-2
1
2
3
4
5
6
7
8
9
10
11
12
13
{% autoescape true %}
Everything will be automatically escaped in this block
using the HTML strategy
{% endautoescape %}
{% autoescape false %}
Everything will be outputted as is in this block
{% endautoescape %}
{% autoescape true js %}
Everything will be automatically escaped in this block
using the js escaping strategy
{% endautoescape %}
PDF brought to you by
generated on September 13, 2017
Chapter 10: autoescape | 64
When automatic escaping is enabled everything is escaped by default except for values explicitly marked
as safe. Those can be marked in the template by using the raw filter:
Listing 10-3
1
2
3
{% autoescape %}
{{ safe_value|raw }}
{% endautoescape %}
Functions returning template data (like macros and parent) always return safe markup.
Twig is smart enough to not escape an already escaped value by the escape filter.
Twig does not escape static expressions:
Listing 10-4
1
2
3
{% set hello = "<strong>Hello</strong>" %}
{{ hello }}
{{ "<strong>world</strong>" }}
Will be rendered "<strong>Hello</strong> world".
The chapter Twig for Developers gives more information about when and how automatic escaping
is applied.
PDF brought to you by
generated on September 13, 2017
Chapter 10: autoescape | 65
Chapter 11
block
Blocks are used for inheritance and act as placeholders and replacements at the same time. They are
documented in detail in the documentation for the extends tag.
Block names should consist of alphanumeric characters, and underscores. Dashes are not permitted.
block, parent, use, extends
PDF brought to you by
generated on September 13, 2017
Chapter 11: block | 66
Chapter 12
do
New in version 1.5: The do tag was added in Twig 1.5.
The do tag works exactly like the regular variable expression ({{ ... }}) just that it doesn't print
anything:
Listing 12-1
1
{% do 1 + 2 %}
PDF brought to you by
generated on September 13, 2017
Chapter 12: do | 67
Chapter 13
embed
New in version 1.8: The embed tag was added in Twig 1.8.
The embed tag combines the behaviour of include and extends. It allows you to include another
template's contents, just like include does. But it also allows you to override any block defined inside
the included template, like when extending a template.
Think of an embedded template as a "micro layout skeleton".
Listing 13-1
1
2
3
4
5
6
7
8
9
10
{% embed "teasers_skeleton.twig" %}
{# These blocks are defined in "teasers_skeleton.twig" #}
{# and we override them right here:
#}
{% block left_teaser %}
Some content for the left teaser box
{% endblock %}
{% block right_teaser %}
Some content for the right teaser box
{% endblock %}
{% endembed %}
The embed tag takes the idea of template inheritance to the level of content fragments. While template
inheritance allows for "document skeletons", which are filled with life by child templates, the embed tag
allows you to create "skeletons" for smaller units of content and re-use and fill them anywhere you like.
Since the use case may not be obvious, let's look at a simplified example. Imagine a base template shared
by multiple HTML pages, defining a single block named "content":
Listing 13-2
1
2
3
4
5
6
7
8
9
10
11
12
┌─── page layout ─────────────────────┐
│
│
│
┌── block "content" ──┐
│
│
│
│
│
│
│
│
│
│
│ (child template to │
│
│
│ put content here) │
│
│
│
│
│
│
│
│
│
│
└─────────────────────┘
│
│
│
└─────────────────────────────────────┘
Some pages ("foo" and "bar") share the same content structure - two vertically stacked boxes:
PDF brought to you by
generated on September 13, 2017
Chapter 13: embed | 68
Listing 13-3
1
2
3
4
5
6
7
8
9
10
11
12
┌─── page layout ─────────────────────┐
│
│
│
┌── block "content" ──┐
│
│
│ ┌─ block "top" ───┐ │
│
│
│ │
│ │
│
│
│ └─────────────────┘ │
│
│
│ ┌─ block "bottom" ┐ │
│
│
│ │
│ │
│
│
│ └─────────────────┘ │
│
│
└─────────────────────┘
│
│
│
└─────────────────────────────────────┘
While other pages ("boom" and "baz") share a different content structure - two boxes side by side:
Listing 13-4
1
2
3
4
5
6
7
8
9
10
11
12
┌─── page layout ─────────────────────┐
│
│
│
┌── block "content" ──┐
│
│
│
│
│
│
│ ┌ block ┐ ┌ block ┐ │
│
│
│ │"left" │ │"right"│ │
│
│
│ │
│ │
│ │
│
│
│ │
│ │
│ │
│
│
│ └───────┘ └───────┘ │
│
│
└─────────────────────┘
│
│
│
└─────────────────────────────────────┘
Without the embed tag, you have two ways to design your templates:
• Create two "intermediate" base templates that extend the master layout template: one with
vertically stacked boxes to be used by the "foo" and "bar" pages and another one with side-byside boxes for the "boom" and "baz" pages.
• Embed the markup for the top/bottom and left/right boxes into each page template directly.
These two solutions do not scale well because they each have a major drawback:
• The first solution may indeed work for this simplified example. But imagine we add a sidebar,
which may again contain different, recurring structures of content. Now we would need to
create intermediate base templates for all occurring combinations of content structure and
sidebar structure... and so on.
• The second solution involves duplication of common code with all its negative consequences:
any change involves finding and editing all affected copies of the structure, correctness has to
be verified for each copy, copies may go out of sync by careless modifications etc.
In such a situation, the embed tag comes in handy. The common layout code can live in a single
base template, and the two different content structures, let's call them "micro layouts" go into separate
templates which are embedded as necessary:
Page template foo.twig:
Listing 13-5
1
2
3
4
{% extends "layout_skeleton.twig" %}
{% block content %}
{% embed "vertical_boxes_skeleton.twig" %}
PDF brought to you by
generated on September 13, 2017
Chapter 13: embed | 69
5
6
7
8
9
10
11
12
13
{% block top %}
Some content for the top box
{% endblock %}
{% block bottom %}
Some content for the bottom box
{% endblock %}
{% endembed %}
{% endblock %}
And here is the code for vertical_boxes_skeleton.twig:
Listing 13-6
1
2
3
4
5
6
7
8
9
10
11
<div class="top_box">
{% block top %}
Top box default content
{% endblock %}
</div>
<div class="bottom_box">
{% block bottom %}
Bottom box default content
{% endblock %}
</div>
The goal of the vertical_boxes_skeleton.twig template being to factor out the HTML markup
for the boxes.
The embed tag takes the exact same arguments as the include tag:
Listing 13-7
1
2
3
4
5
6
7
8
9
10
11
{% embed "base" with {'foo': 'bar'} %}
...
{% endembed %}
{% embed "base" with {'foo': 'bar'} only %}
...
{% endembed %}
{% embed "base" ignore missing %}
...
{% endembed %}
As embedded templates do not have "names", auto-escaping strategies based on the template name
won't work as expected if you change the context (for instance, if you embed a CSS/JavaScript
template into an HTML one). In that case, explicitly set the default auto-escaping strategy with the
autoescape tag.
include
PDF brought to you by
generated on September 13, 2017
Chapter 13: embed | 70
Chapter 14
extends
The extends tag can be used to extend a template from another one.
Like PHP, Twig does not support multiple inheritance. So you can only have one extends tag called
per rendering. However, Twig supports horizontal reuse.
Let's define a base template, base.html, which defines a simple HTML skeleton document:
Listing 14-1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
<!DOCTYPE html>
<html>
<head>
{% block head %}
<link rel="stylesheet" href="style.css" />
<title>{% block title %}{% endblock %} - My Webpage</title>
{% endblock %}
</head>
<body>
<div id="content">{% block content %}{% endblock %}</div>
<div id="footer">
{% block footer %}
&copy; Copyright 2011 by <a href="http://domain.invalid/">you</a>.
{% endblock %}
</div>
</body>
</html>
In this example, the block tags define four blocks that child templates can fill in.
All the block tag does is to tell the template engine that a child template may override those portions of
the template.
Child Template
A child template might look like this:
Listing 14-2
PDF brought to you by
generated on September 13, 2017
Chapter 14: extends | 71
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
{% extends "base.html" %}
{% block title %}Index{% endblock %}
{% block head %}
{{ parent() }}
<style type="text/css">
.important { color: #336699; }
</style>
{% endblock %}
{% block content %}
<h1>Index</h1>
<p class="important">
Welcome on my awesome homepage.
</p>
{% endblock %}
The extends tag is the key here. It tells the template engine that this template "extends" another
template. When the template system evaluates this template, first it locates the parent. The extends tag
should be the first tag in the template.
Note that since the child template doesn't define the footer block, the value from the parent template
is used instead.
You can't define multiple block tags with the same name in the same template. This limitation exists
because a block tag works in "both" directions. That is, a block tag doesn't just provide a hole to fill - it
also defines the content that fills the hole in the parent. If there were two similarly-named block tags in
a template, that template's parent wouldn't know which one of the blocks' content to use.
If you want to print a block multiple times you can however use the block function:
Listing 14-3
1
2
3
<title>{% block title %}{% endblock %}</title>
<h1>{{ block('title') }}</h1>
{% block body %}{% endblock %}
Parent Blocks
It's possible to render the contents of the parent block by using the parent function. This gives back the
results of the parent block:
Listing 14-4
1
2
3
4
5
{% block sidebar %}
<h3>Table Of Contents</h3>
...
{{ parent() }}
{% endblock %}
Named Block End-Tags
Twig allows you to put the name of the block after the end tag for better readability:
Listing 14-5
1
2
3
4
5
{% block sidebar %}
{% block inner_sidebar %}
...
{% endblock inner_sidebar %}
{% endblock sidebar %}
Of course, the name after the endblock word must match the block name.
PDF brought to you by
generated on September 13, 2017
Chapter 14: extends | 72
Block Nesting and Scope
Blocks can be nested for more complex layouts. Per default, blocks have access to variables from outer
scopes:
Listing 14-6
1
2
3
{% for item in seq %}
<li>{% block loop_item %}{{ item }}{% endblock %}</li>
{% endfor %}
Block Shortcuts
For blocks with little content, it's possible to use a shortcut syntax. The following constructs do the same
thing:
Listing 14-7
1
2
3
{% block title %}
{{ page_title|title }}
{% endblock %}
Listing 14-8
1
{% block title page_title|title %}
Dynamic Inheritance
Twig supports dynamic inheritance by using a variable as the base template:
Listing 14-9
1
{% extends some_var %}
If the variable evaluates to a Twig_Template or a Twig_TemplateWrapper instance, Twig will use it
as the parent template:
Listing 14-10
1
2
3
4
5
6
7
8
9
// {% extends layout %}
// deprecated as of Twig 1.28
$layout = $twig->loadTemplate('some_layout_template.twig');
// as of Twig 1.28
$layout = $twig->load('some_layout_template.twig');
$twig->display('template.twig', array('layout' => $layout));
New in version 1.2: The possibility to pass an array of templates has been added in Twig 1.2.
You can also provide a list of templates that are checked for existence. The first template that exists will
be used as a parent:
Listing 14-11
1
{% extends ['layout.html', 'base_layout.html'] %}
Conditional Inheritance
As the template name for the parent can be any valid Twig expression, it's possible to make the
inheritance mechanism conditional:
Listing 14-12
1
{% extends standalone ? "minimum.html" : "base.html" %}
PDF brought to you by
generated on September 13, 2017
Chapter 14: extends | 73
In this example, the template will extend the "minimum.html" layout template if the standalone
variable evaluates to true, and "base.html" otherwise.
How do blocks work?
A block provides a way to change how a certain part of a template is rendered but it does not interfere in
any way with the logic around it.
Let's take the following example to illustrate how a block works and more importantly, how it does not
work:
Listing 14-13
1
2
3
4
5
6
7
8
{# base.twig #}
{% for post in posts %}
{% block post %}
<h1>{{ post.title }}</h1>
<p>{{ post.body }}</p>
{% endblock %}
{% endfor %}
If you render this template, the result would be exactly the same with or without the block tag. The
block inside the for loop is just a way to make it overridable by a child template:
Listing 14-14
1
2
3
4
5
6
7
8
9
10
{# child.twig #}
{% extends "base.twig" %}
{% block post %}
<article>
<header>{{ post.title }}</header>
<section>{{ post.text }}</section>
</article>
{% endblock %}
Now, when rendering the child template, the loop is going to use the block defined in the child template
instead of the one defined in the base one; the executed template is then equivalent to the following one:
Listing 14-15
1
2
3
4
5
6
{% for post in posts %}
<article>
<header>{{ post.title }}</header>
<section>{{ post.text }}</section>
</article>
{% endfor %}
Let's take another example: a block included within an if statement:
Listing 14-16
1
2
3
4
5
6
7
{% if posts is empty %}
{% block head %}
{{ parent() }}
<meta name="robots" content="noindex, follow">
{% endblock head %}
{% endif %}
Contrary to what you might think, this template does not define a block conditionally; it just makes
overridable by a child template the output of what will be rendered when the condition is true.
If you want the output to be displayed conditionally, use the following instead:
Listing 14-17
1
2
3
{% block head %}
{{ parent() }}
PDF brought to you by
generated on September 13, 2017
Chapter 14: extends | 74
4
5
6
7
{% if posts is empty %}
<meta name="robots" content="noindex, follow">
{% endif %}
{% endblock head %}
block, block, parent, use
PDF brought to you by
generated on September 13, 2017
Chapter 14: extends | 75
Chapter 15
filter
Filter sections allow you to apply regular Twig filters on a block of template data. Just wrap the code in
the special filter section:
Listing 15-1
1
2
3
{% filter upper %}
This text becomes uppercase
{% endfilter %}
You can also chain filters:
Listing 15-2
1
2
3
4
5
{% filter lower|escape %}
<strong>SOME TEXT</strong>
{% endfilter %}
{# outputs "&lt;strong&gt;some text&lt;/strong&gt;" #}
PDF brought to you by
generated on September 13, 2017
Chapter 15: filter | 76
Chapter 16
flush
New in version 1.5: The flush tag was added in Twig 1.5.
The flush tag tells Twig to flush the output buffer:
Listing 16-1
1
{% flush %}
Internally, Twig uses the PHP flush1 function.
1. http://php.net/flush
PDF brought to you by
generated on September 13, 2017
Chapter 16: flush | 77
Chapter 17
for
Loop over each item in a sequence. For example, to display a list of users provided in a variable called
users:
Listing 17-1
1
2
3
4
5
6
<h1>Members</h1>
<ul>
{% for user in users %}
<li>{{ user.username|e }}</li>
{% endfor %}
</ul>
A sequence can be either an array or an object implementing the Traversable interface.
If you do need to iterate over a sequence of numbers, you can use the .. operator:
Listing 17-2
1
2
3
{% for i in 0..10 %}
* {{ i }}
{% endfor %}
The above snippet of code would print all numbers from 0 to 10.
It can be also useful with letters:
Listing 17-3
1
2
3
{% for letter in 'a'..'z' %}
* {{ letter }}
{% endfor %}
The .. operator can take any expression at both sides:
Listing 17-4
1
2
3
{% for letter in 'a'|upper..'z'|upper %}
* {{ letter }}
{% endfor %}
PDF brought to you by
generated on September 13, 2017
Chapter 17: for | 78
The loop variable
Inside of a for loop block you can access some special variables:
Listing 17-5
1
2
3
Variable
Description
loop.index
The current iteration of the loop. (1 indexed)
loop.index0
The current iteration of the loop. (0 indexed)
loop.revindex
The number of iterations from the end of the loop (1 indexed)
loop.revindex0
The number of iterations from the end of the loop (0 indexed)
loop.first
True if first iteration
loop.last
True if last iteration
loop.length
The number of items in the sequence
loop.parent
The parent context
{% for user in users %}
{{ loop.index }} - {{ user.username }}
{% endfor %}
The loop.length, loop.revindex, loop.revindex0, and loop.last variables are only
available for PHP arrays, or objects that implement the Countable interface. They are also not
available when looping with a condition.
New in version 1.2: The if modifier support has been added in Twig 1.2.
Adding a condition
Unlike in PHP, it's not possible to break or continue in a loop. You can however filter the sequence
during iteration which allows you to skip items. The following example skips all the users which are not
active:
Listing 17-6
1
2
3
4
5
<ul>
{% for user in users if user.active %}
<li>{{ user.username|e }}</li>
{% endfor %}
</ul>
The advantage is that the special loop variable will count correctly thus not counting the users not
iterated over. Keep in mind that properties like loop.last will not be defined when using loop
conditions.
Using the loop variable within the condition is not recommended as it will probably not be doing
what you expect it to. For instance, adding a condition like loop.index > 4 won't work as the
index is only incremented when the condition is true (so the condition will never match).
PDF brought to you by
generated on September 13, 2017
Chapter 17: for | 79
The else Clause
If no iteration took place because the sequence was empty, you can render a replacement block by using
else:
Listing 17-7
1
2
3
4
5
6
7
<ul>
{% for user in users %}
<li>{{ user.username|e }}</li>
{% else %}
<li><em>no user found</em></li>
{% endfor %}
</ul>
Iterating over Keys
By default, a loop iterates over the values of the sequence. You can iterate on keys by using the keys
filter:
Listing 17-8
1
2
3
4
5
6
<h1>Members</h1>
<ul>
{% for key in users|keys %}
<li>{{ key }}</li>
{% endfor %}
</ul>
Iterating over Keys and Values
You can also access both keys and values:
Listing 17-9
1
2
3
4
5
6
<h1>Members</h1>
<ul>
{% for key, user in users %}
<li>{{ key }}: {{ user.username|e }}</li>
{% endfor %}
</ul>
Iterating over a Subset
You might want to iterate over a subset of values. This can be achieved using the slice filter:
Listing 17-10
1
2
3
4
5
6
<h1>Top Ten Members</h1>
<ul>
{% for user in users|slice(0, 10) %}
<li>{{ user.username|e }}</li>
{% endfor %}
</ul>
PDF brought to you by
generated on September 13, 2017
Chapter 17: for | 80
Chapter 18
from
The from tag imports macro names into the current namespace. The tag is documented in detail in the
documentation for the import tag.
macro, import
PDF brought to you by
generated on September 13, 2017
Chapter 18: from | 81
Chapter 19
if
The if statement in Twig is comparable with the if statements of PHP.
In the simplest form you can use it to test if an expression evaluates to true:
Listing 19-1
1
2
3
{% if online == false %}
<p>Our website is in maintenance mode. Please, come back later.</p>
{% endif %}
You can also test if an array is not empty:
Listing 19-2
1
2
3
4
5
6
7
{% if users %}
<ul>
{% for user in users %}
<li>{{ user.username|e }}</li>
{% endfor %}
</ul>
{% endif %}
If you want to test if the variable is defined, use if users is defined instead.
You can also use not to check for values that evaluate to false:
Listing 19-3
1
2
3
{% if not user.subscribed %}
<p>You are not subscribed to our mailing list.</p>
{% endif %}
For multiple conditions, and and or can be used:
Listing 19-4
1
2
3
{% if temperature > 18 and temperature < 27 %}
<p>It's a nice day for a walk in the park.</p>
{% endif %}
For multiple branches elseif and else can be used like in PHP. You can use more complex
expressions there too:
PDF brought to you by
generated on September 13, 2017
Chapter 19: if | 82
Listing 19-5
1
2
3
4
5
6
7
{% if kenny.sick %}
Kenny is sick.
{% elseif kenny.dead %}
You killed Kenny! You bastard!!!
{% else %}
Kenny looks okay --- so far
{% endif %}
The rules to determine if an expression is true or false are the same as in PHP; here are the edge
cases rules:
Value
Boolean evaluation
empty string
false
numeric zero
false
whitespace-only string
true
empty array
false
null
false
non-empty array
true
object
true
PDF brought to you by
generated on September 13, 2017
Chapter 19: if | 83
Chapter 20
import
Twig supports putting often used code into macros. These macros can go into different templates and get
imported from there.
There are two ways to import templates. You can import the complete template into a variable or request
specific macros from it.
Imagine we have a helper module that renders forms (called forms.html):
Listing 20-1
1
2
3
4
5
6
7
{% macro input(name, value, type, size) %}
<input type="{{ type|default('text') }}" name="{{ name }}" value="{{ value|e }}" size="{{ size|default(20)
}}" />
{% endmacro %}
{% macro textarea(name, value, rows, cols) %}
<textarea name="{{ name }}" rows="{{ rows|default(10) }}" cols="{{ cols|default(40) }}">{{ value|e
}}</textarea>
{% endmacro %}
The easiest and most flexible is importing the whole module into a variable. That way you can access the
attributes:
Listing 20-2
1
2
3
4
5
6
7
8
9
{% import 'forms.html' as forms %}
<dl>
<dt>Username</dt>
<dd>{{ forms.input('username') }}</dd>
<dt>Password</dt>
<dd>{{ forms.input('password', null, 'password') }}</dd>
</dl>
<p>{{ forms.textarea('comment') }}</p>
Alternatively you can import names from the template into the current namespace:
Listing 20-3
1
2
3
4
5
6
7
{% from 'forms.html' import input as input_field, textarea %}
<dl>
<dt>Username</dt>
<dd>{{ input_field('username') }}</dd>
<dt>Password</dt>
<dd>{{ input_field('password', '', 'password') }}</dd>
PDF brought to you by
generated on September 13, 2017
Chapter 20: import | 84
8
9
</dl>
<p>{{ textarea('comment') }}</p>
To import macros from the current file, use the special _self variable for the source.
macro, from
PDF brought to you by
generated on September 13, 2017
Chapter 20: import | 85
Chapter 21
include
The include statement includes a template and returns the rendered content of that file into the current
namespace:
Listing 21-1
1
2
3
{% include 'header.html' %}
Body
{% include 'footer.html' %}
Included templates have access to the variables of the active context.
If you are using the filesystem loader, the templates are looked for in the paths defined by it.
You can add additional variables by passing them after the with keyword:
Listing 21-2
1
2
3
4
5
{# template.html will have access to the variables from the current context and the additional ones provided #}
{% include 'template.html' with {'foo': 'bar'} %}
{% set vars = {'foo': 'bar'} %}
{% include 'template.html' with vars %}
You can disable access to the context by appending the only keyword:
Listing 21-3
1
2
{# only the foo variable will be accessible #}
{% include 'template.html' with {'foo': 'bar'} only %}
Listing 21-4
1
2
{# no variables will be accessible #}
{% include 'template.html' only %}
When including a template created by an end user, you should consider sandboxing it. More
information in the Twig for Developers chapter and in the sandbox tag documentation.
The template name can be any valid Twig expression:
Listing 21-5
1
2
{% include some_var %}
{% include ajax ? 'ajax.html' : 'not_ajax.html' %}
PDF brought to you by
generated on September 13, 2017
Chapter 21: include | 86
And if the expression evaluates to a Twig_Template or a Twig_TemplateWrapper instance, Twig
will use it directly:
Listing 21-6
1
2
3
4
5
6
7
8
9
// {% include template %}
// deprecated as of Twig 1.28
$template = $twig->loadTemplate('some_template.twig');
// as of Twig 1.28
$template = $twig->load('some_template.twig');
$twig->display('template.twig', array('template' => $template));
New in version 1.2: The ignore missing feature has been added in Twig 1.2.
You can mark an include with ignore missing in which case Twig will ignore the statement if the
template to be included does not exist. It has to be placed just after the template name. Here some valid
examples:
Listing 21-7
1
2
3
{% include 'sidebar.html' ignore missing %}
{% include 'sidebar.html' ignore missing with {'foo': 'bar'} %}
{% include 'sidebar.html' ignore missing only %}
New in version 1.2: The possibility to pass an array of templates has been added in Twig 1.2.
You can also provide a list of templates that are checked for existence before inclusion. The first template
that exists will be included:
Listing 21-8
1
{% include ['page_detailed.html', 'page.html'] %}
If ignore missing is given, it will fall back to rendering nothing if none of the templates exist,
otherwise it will throw an exception.
PDF brought to you by
generated on September 13, 2017
Chapter 21: include | 87
Chapter 22
macro
Macros are comparable with functions in regular programming languages. They are useful to put often
used HTML idioms into reusable elements to not repeat yourself.
Here is a small example of a macro that renders a form element:
Listing 22-1
1
2
3
{% macro input(name, value, type, size) %}
<input type="{{ type|default('text') }}" name="{{ name }}" value="{{ value|e }}" size="{{ size|default(20)
}}" />
{% endmacro %}
Macros differ from native PHP functions in a few ways:
• Default argument values are defined by using the default filter in the macro body;
• Arguments of a macro are always optional.
• If extra positional arguments are passed to a macro, they end up in the special varargs variable as a
list of values.
But as with PHP functions, macros don't have access to the current template variables.
You can pass the whole context as an argument by using the special _context variable.
Import
Macros can be defined in any template, and need to be "imported" before being used (see the
documentation for the import tag for more information):
Listing 22-2
1
{% import "forms.html" as forms %}
The above import call imports the "forms.html" file (which can contain only macros, or a template and
some macros), and import the functions as items of the forms variable.
The macro can then be called at will:
PDF brought to you by
generated on September 13, 2017
Chapter 22: macro | 88
Listing 22-3
1
2
<p>{{ forms.input('username') }}</p>
<p>{{ forms.input('password', null, 'password') }}</p>
If macros are defined and used in the same template, you can use the special _self variable to import
them:
Listing 22-4
1
2
3
{% import _self as forms %}
<p>{{ forms.input('username') }}</p>
When you define a macro in the template where you are going to use it, you might be tempted to call
the macro directly via _self.input() instead of importing it; even if seems to work, this is just a
side-effect of the current implementation and it won't work anymore in Twig 2.x.
When you want to use a macro in another macro from the same file, you need to import it locally:
Listing 22-5
1
2
3
4
5
6
7
8
9
10
11
{% macro input(name, value, type, size) %}
<input type="{{ type|default('text') }}" name="{{ name }}" value="{{ value|e }}" size="{{
size|default(20) }}" />
{% endmacro %}
{% macro wrapped_input(name, value, type, size) %}
{% import _self as forms %}
<div class="field">
{{ forms.input(name, value, type, size) }}
</div>
{% endmacro %}
Named Macro End-Tags
Twig allows you to put the name of the macro after the end tag for better readability:
Listing 22-6
1
2
3
{% macro input() %}
...
{% endmacro input %}
Of course, the name after the endmacro word must match the macro name.
from, import
PDF brought to you by
generated on September 13, 2017
Chapter 22: macro | 89
Chapter 23
sandbox
The sandbox tag can be used to enable the sandboxing mode for an included template, when
sandboxing is not enabled globally for the Twig environment:
Listing 23-1
1
2
3
{% sandbox %}
{% include 'user.html' %}
{% endsandbox %}
The sandbox tag is only available when the sandbox extension is enabled (see the Twig for
Developers chapter).
The sandbox tag can only be used to sandbox an include tag and it cannot be used to sandbox a
section of a template. The following example won't work:
Listing 23-2
1
2
3
4
5
{% sandbox %}
{% for i in 1..2 %}
{{ i }}
{% endfor %}
{% endsandbox %}
PDF brought to you by
generated on September 13, 2017
Chapter 23: sandbox | 90
Chapter 24
set
Inside code blocks you can also assign values to variables. Assignments use the set tag and can have
multiple targets.
Here is how you can assign the bar value to the foo variable:
Listing 24-1
1
{% set foo = 'bar' %}
After the set call, the foo variable is available in the template like any other ones:
Listing 24-2
1
2
{# displays bar #}
{{ foo }}
The assigned value can be any valid Twig expressions:
Listing 24-3
1
2
3
{% set foo = [1, 2] %}
{% set foo = {'foo': 'bar'} %}
{% set foo = 'foo' ~ 'bar' %}
Several variables can be assigned in one block:
Listing 24-4
1
2
3
4
5
6
{% set foo, bar = 'foo', 'bar' %}
{# is equivalent to #}
{% set foo = 'foo' %}
{% set bar = 'bar' %}
The set tag can also be used to 'capture' chunks of text:
Listing 24-5
1
2
3
4
5
{% set foo %}
<div id="pagination">
...
</div>
{% endset %}
PDF brought to you by
generated on September 13, 2017
Chapter 24: set | 91
If you enable automatic output escaping, Twig will only consider the content to be safe when
capturing chunks of text.
Note that loops are scoped in Twig; therefore a variable declared inside a for loop is not accessible
outside the loop itself:
Listing 24-6
1
2
3
4
5
{% for item in list %}
{% set foo = item %}
{% endfor %}
{# foo is NOT available #}
If you want to access the variable, just declare it before the loop:
Listing 24-7
1
2
3
4
5
6
{% set foo = "" %}
{% for item in list %}
{% set foo = item %}
{% endfor %}
{# foo is available #}
PDF brought to you by
generated on September 13, 2017
Chapter 24: set | 92
Chapter 25
spaceless
Use the spaceless tag to remove whitespace between HTML tags, not whitespace within HTML tags
or whitespace in plain text:
Listing 25-1
1
2
3
4
5
6
7
{% spaceless %}
<div>
<strong>foo</strong>
</div>
{% endspaceless %}
{# output will be <div><strong>foo</strong></div> #}
This tag is not meant to "optimize" the size of the generated HTML content but merely to avoid extra
whitespace between HTML tags to avoid browser rendering quirks under some circumstances.
If you want to optimize the size of the generated HTML content, gzip compress the output instead.
If you want to create a tag that actually removes all extra whitespace in an HTML string, be warned
that this is not as easy as it seems to be (think of textarea or pre tags for instance). Using a thirdparty library like Tidy is probably a better idea.
For more information on whitespace control, read the dedicated section of the documentation and
learn how you can also use the whitespace control modifier on your tags.
PDF brought to you by
generated on September 13, 2017
Chapter 25: spaceless | 93
Chapter 26
use
New in version 1.1: Horizontal reuse was added in Twig 1.1.
Horizontal reuse is an advanced Twig feature that is hardly ever needed in regular templates. It is
mainly used by projects that need to make template blocks reusable without using inheritance.
Template inheritance is one of the most powerful features of Twig but it is limited to single inheritance;
a template can only extend one other template. This limitation makes template inheritance simple to
understand and easy to debug:
Listing 26-1
1
2
3
4
{% extends "base.html" %}
{% block title %}{% endblock %}
{% block content %}{% endblock %}
Horizontal reuse is a way to achieve the same goal as multiple inheritance, but without the associated
complexity:
Listing 26-2
1
2
3
4
5
6
{% extends "base.html" %}
{% use "blocks.html" %}
{% block title %}{% endblock %}
{% block content %}{% endblock %}
The use statement tells Twig to import the blocks defined in blocks.html into the current template
(it's like macros, but for blocks):
Listing 26-3
1
2
3
{# blocks.html #}
{% block sidebar %}{% endblock %}
In this example, the use statement imports the sidebar block into the main template. The code is
mostly equivalent to the following one (the imported blocks are not outputted automatically):
Listing 26-4
PDF brought to you by
generated on September 13, 2017
Chapter 26: use | 94
1
2
3
4
5
{% extends "base.html" %}
{% block sidebar %}{% endblock %}
{% block title %}{% endblock %}
{% block content %}{% endblock %}
The use tag only imports a template if it does not extend another template, if it does not define
macros, and if the body is empty. But it can use other templates.
Because use statements are resolved independently of the context passed to the template, the
template reference cannot be an expression.
The main template can also override any imported block. If the template already defines the sidebar
block, then the one defined in blocks.html is ignored. To avoid name conflicts, you can rename
imported blocks:
Listing 26-5
1
2
3
4
5
6
7
{% extends "base.html" %}
{% use "blocks.html" with sidebar as base_sidebar, title as base_title %}
{% block sidebar %}{% endblock %}
{% block title %}{% endblock %}
{% block content %}{% endblock %}
New in version 1.3: The parent() support was added in Twig 1.3.
The parent() function automatically determines the correct inheritance tree, so it can be used when
overriding a block defined in an imported template:
Listing 26-6
1
2
3
4
5
6
7
8
9
10
{% extends "base.html" %}
{% use "blocks.html" %}
{% block sidebar %}
{{ parent() }}
{% endblock %}
{% block title %}{% endblock %}
{% block content %}{% endblock %}
In this example, parent() will correctly call the sidebar block from the blocks.html template.
In Twig 1.2, renaming allows you to simulate inheritance by calling the "parent" block:
Listing 26-7
1
2
3
4
5
6
7
{% extends "base.html" %}
{% use "blocks.html" with sidebar as parent_sidebar %}
{% block sidebar %}
{{ block('parent_sidebar') }}
{% endblock %}
You can use as many use statements as you want in any given template. If two imported templates
define the same block, the latest one wins.
PDF brought to you by
generated on September 13, 2017
Chapter 26: use | 95
Chapter 27
verbatim
New in version 1.12: The verbatim tag was added in Twig 1.12 (it was named raw before).
The verbatim tag marks sections as being raw text that should not be parsed. For example to put Twig
syntax as example into a template you can use this snippet:
Listing 27-1
1
2
3
4
5
6
7
{% verbatim %}
<ul>
{% for item in seq %}
<li>{{ item }}</li>
{% endfor %}
</ul>
{% endverbatim %}
The verbatim tag works in the exact same way as the old raw tag, but was renamed to avoid
confusion with the raw filter.
PDF brought to you by
generated on September 13, 2017
Chapter 27: verbatim | 96
Chapter 28
with
New in version 1.28: The with tag was added in Twig 1.28.
Use the with tag to create a new inner scope. Variables set within this scope are not visible outside of
the scope:
Listing 28-1
1
2
3
4
5
{% with %}
{% set
{{ foo
{% endwith
foo is not
foo = 42 %}
}}
foo is 42 here
%}
visible here any longer
Instead of defining variables at the beginning of the scope, you can pass a hash of variables you want to
define in the with tag; the previous example is equivalent to the following one:
Listing 28-2
1
2
3
4
5
6
7
8
9
10
{% with { foo: 42 } %}
{{ foo }}
foo is 42 here
{% endwith %}
foo is not visible here any longer
{# it works with any expression that resolves to a hash #}
{% set vars = { foo: 42 } %}
{% with vars %}
...
{% endwith %}
By default, the inner scope has access to the outer scope context; you can disable this behavior by
appending the only keyword:
Listing 28-3
1
2
3
4
5
{% set bar = 'bar' %}
{% with { foo: 42 } only %}
{# only foo is defined #}
{# bar is not defined #}
{% endwith %}
PDF brought to you by
generated on September 13, 2017
Chapter 28: with | 97
Chapter 29
abs
The abs filter returns the absolute value.
Listing 29-1
1
2
3
4
5
{# number = -5 #}
{{ number|abs }}
{# outputs 5 #}
Internally, Twig uses the PHP abs1 function.
1. http://php.net/abs
PDF brought to you by
generated on September 13, 2017
Chapter 29: abs | 98
Chapter 30
batch
New in version 1.12.3: The batch filter was added in Twig 1.12.3.
The batch filter "batches" items by returning a list of lists with the given number of items. A second
parameter can be provided and used to fill in missing items:
Listing 30-1
1
2
3
4
5
6
7
8
9
10
11
{% set items = ['a', 'b', 'c', 'd', 'e', 'f', 'g'] %}
<table>
{% for row in items|batch(3, 'No item') %}
<tr>
{% for column in row %}
<td>{{ column }}</td>
{% endfor %}
</tr>
{% endfor %}
</table>
The above example will be rendered as:
Listing 30-2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
<table>
<tr>
<td>a</td>
<td>b</td>
<td>c</td>
</tr>
<tr>
<td>d</td>
<td>e</td>
<td>f</td>
</tr>
<tr>
<td>g</td>
<td>No item</td>
<td>No item</td>
</tr>
</table>
PDF brought to you by
generated on September 13, 2017
Chapter 30: batch | 99
Arguments
•
•
size:
fill:
The size of the batch; fractional numbers will be rounded up
Used to fill in missing items
PDF brought to you by
generated on September 13, 2017
Chapter 30: batch | 100
Chapter 31
capitalize
The capitalize filter capitalizes a value. The first character will be uppercase, all others lowercase:
Listing 31-1
1
2
3
{{ 'my first car'|capitalize }}
{# outputs 'My first car' #}
PDF brought to you by
generated on September 13, 2017
Chapter 31: capitalize | 101
Chapter 32
convert_encoding
New in version 1.4: The convert_encoding filter was added in Twig 1.4.
The convert_encoding filter converts a string from one encoding to another. The first argument is
the expected output charset and the second one is the input charset:
Listing 32-1
1
{{ data|convert_encoding('UTF-8', 'iso-2022-jp') }}
This filter relies on the iconv1 or mbstring2 extension, so one of them must be installed. In case both
are installed, mbstring3 is used by default (Twig before 1.8.1 uses iconv4 by default).
Arguments
•
•
1.
2.
3.
4.
to:
The output charset
The input charset
from:
http://php.net/iconv
http://php.net/mbstring
http://php.net/mbstring
http://php.net/iconv
PDF brought to you by
generated on September 13, 2017
Chapter 32: convert_encoding | 102
Chapter 33
date
New in version 1.1: The timezone support has been added in Twig 1.1.
New in version 1.5: The default date format support has been added in Twig 1.5.
New in version 1.6.1: The default timezone support has been added in Twig 1.6.1.
New in version 1.11.0: The introduction of the false value for the timezone was introduced in Twig 1.11.0
The date filter formats a date to a given format:
Listing 33-1
1
{{ post.published_at|date("m/d/Y") }}
The format specifier is the same as supported by date1, except when the filtered data is of type
DateInterval2, when the format must conform to DateInterval::format3 instead.
The date filter accepts strings (it must be in a format supported by the strtotime4 function), DateTime5
instances, or DateInterval6 instances. For instance, to display the current date, filter the word "now":
Listing 33-2
1
{{ "now"|date("m/d/Y") }}
To escape words and characters in the date format use \\ in front of each character:
Listing 33-3
1
{{ post.published_at|date("F jS \\a\\t g:ia") }}
If the value passed to the date filter is null, it will return the current date by default. If an empty string
is desired instead of the current date, use a ternary operator:
Listing 33-4
1
{{ post.published_at is empty ? "" : post.published_at|date("m/d/Y") }}
1. http://www.php.net/date
2. http://www.php.net/DateInterval
3. http://www.php.net/DateInterval.format
4. http://www.php.net/strtotime
5. http://www.php.net/DateTime
6. http://www.php.net/DateInterval
PDF brought to you by
generated on September 13, 2017
Chapter 33: date | 103
If no format is provided, Twig will use the default one: F j, Y H:i. This default can be easily changed
by calling the setDateFormat() method on the core extension instance. The first argument is the
default format for dates and the second one is the default format for date intervals:
Listing 33-5
1
2
3
4
5
$twig = new Twig_Environment($loader);
$twig->getExtension('Twig_Extension_Core')->setDateFormat('d/m/Y', '%d days');
// before Twig 1.26
$twig->getExtension('core')->setDateFormat('d/m/Y', '%d days');
Timezone
By default, the date is displayed by applying the default timezone (the one specified in php.ini or declared
in Twig -- see below), but you can override it by explicitly specifying a timezone:
Listing 33-6
1
{{ post.published_at|date("m/d/Y", "Europe/Paris") }}
If the date is already a DateTime object, and if you want to keep its current timezone, pass false as the
timezone value:
Listing 33-7
1
{{ post.published_at|date("m/d/Y", false) }}
The default timezone can also be set globally by calling setTimezone():
Listing 33-8
1
2
3
4
5
$twig = new Twig_Environment($loader);
$twig->getExtension('Twig_Extension_Core')->setTimezone('Europe/Paris');
// before Twig 1.26
$twig->getExtension('core')->setTimezone('Europe/Paris');
Arguments
•
•
format:
The date format
The date timezone
timezone:
PDF brought to you by
generated on September 13, 2017
Chapter 33: date | 104
Chapter 34
date_modify
New in version 1.9.0: The date_modify filter has been added in Twig 1.9.0.
The date_modify filter modifies a date with a given modifier string:
Listing 34-1
1
{{ post.published_at|date_modify("+1 day")|date("m/d/Y") }}
The date_modify filter accepts strings (it must be in a format supported by the strtotime1 function) or
DateTime2 instances. You can easily combine it with the date filter for formatting.
Arguments
•
modifier:
The modifier
1. http://www.php.net/strtotime
2. http://www.php.net/DateTime
PDF brought to you by
generated on September 13, 2017
Chapter 34: date_modify | 105
Chapter 35
default
The default filter returns the passed default value if the value is undefined or empty, otherwise the
value of the variable:
Listing 35-1
1
2
3
4
5
6
7
{{ var|default('var is not defined') }}
{{ var.foo|default('foo item on var is not defined') }}
{{ var['foo']|default('foo item on var is not defined') }}
{{ ''|default('passed var is empty') }}
When using the default filter on an expression that uses variables in some method calls, be sure to use
the default filter whenever a variable can be undefined:
Listing 35-2
1
{{ var.method(foo|default('foo'))|default('foo') }}
Read the documentation for the defined and empty tests to learn more about their semantics.
Arguments
•
default:
The default value
PDF brought to you by
generated on September 13, 2017
Chapter 35: default | 106
Chapter 36
escape
New in version 1.9.0: The css, url, and html_attr strategies were added in Twig 1.9.0.
New in version 1.14.0: The ability to define custom escapers was added in Twig 1.14.0.
The escape filter escapes a string for safe insertion into the final output. It supports different escaping
strategies depending on the template context.
By default, it uses the HTML escaping strategy:
Listing 36-1
1
{{ user.username|escape }}
For convenience, the e filter is defined as an alias:
Listing 36-2
1
{{ user.username|e }}
The escape filter can also be used in other contexts than HTML thanks to an optional argument which
defines the escaping strategy to use:
Listing 36-3
1
2
3
{{ user.username|e }}
{# is equivalent to #}
{{ user.username|e('html') }}
And here is how to escape variables included in JavaScript code:
Listing 36-4
1
2
{{ user.username|escape('js') }}
{{ user.username|e('js') }}
The escape filter supports the following escaping strategies:
•
•
•
html:
escapes a string for the HTML body context.
escapes a string for the JavaScript context.
css: escapes a string for the CSS context. CSS escaping can be applied to any string being inserted
into CSS and escapes everything except alphanumerics.
• url: escapes a string for the URI or parameter contexts. This should not be used to escape an entire
URI; only a subcomponent being inserted.
• html_attr: escapes a string for the HTML attribute context.
js:
PDF brought to you by
generated on September 13, 2017
Chapter 36: escape | 107
Internally, escape uses the PHP native htmlspecialchars1 function for the HTML escaping strategy.
When using automatic escaping, Twig tries to not double-escape a variable when the automatic
escaping strategy is the same as the one applied by the escape filter; but that does not work when
using a variable as the escaping strategy:
Listing 36-5
1
2
3
4
5
6
{% set strategy = 'html' %}
{% autoescape 'html' %}
{{ var|escape('html') }}
{# won't be double-escaped #}
{{ var|escape(strategy) }} {# will be double-escaped #}
{% endautoescape %}
When using a variable as the escaping strategy, you should disable automatic escaping:
Listing 36-6
1
2
3
4
5
{% set strategy = 'html' %}
{% autoescape 'html' %}
{{ var|escape(strategy)|raw }} {# won't be double-escaped #}
{% endautoescape %}
Custom Escapers
You can define custom escapers by calling the setEscaper() method on the core extension instance.
The first argument is the escaper name (to be used in the escape call) and the second one must be a
valid PHP callable:
Listing 36-7
1
2
3
4
5
$twig = new Twig_Environment($loader);
$twig->getExtension('Twig_Extension_Core')->setEscaper('csv', 'csv_escaper');
// before Twig 1.26
$twig->getExtension('core')->setEscaper('csv', 'csv_escaper');
When called by Twig, the callable receives the Twig environment instance, the string to escape, and the
charset.
Built-in escapers cannot be overridden mainly they should be considered as the final implementation
and also for better performance.
Arguments
•
•
strategy:
charset:
The escaping strategy
The string charset
1. http://php.net/htmlspecialchars
PDF brought to you by
generated on September 13, 2017
Chapter 36: escape | 108
Chapter 37
first
New in version 1.12.2: The first filter was added in Twig 1.12.2.
The first filter returns the first "element" of a sequence, a mapping, or a string:
Listing 37-1
1
2
3
4
5
6
7
8
{{ [1, 2, 3, 4]|first }}
{# outputs 1 #}
{{ { a: 1, b: 2, c: 3, d: 4 }|first }}
{# outputs 1 #}
{{ '1234'|first }}
{# outputs 1 #}
It also works with objects implementing the Traversable1 interface.
1. http://php.net/manual/en/class.traversable.php
PDF brought to you by
generated on September 13, 2017
Chapter 37: first | 109
Chapter 38
format
The format filter formats a given string by replacing the placeholders (placeholders follows the sprintf1
notation):
Listing 38-1
1
2
3
4
{{ "I like %s and %s."|format(foo, "bar") }}
{# outputs I like foo and bar
if the foo parameter equals to the foo string. #}
replace
1. http://www.php.net/sprintf
PDF brought to you by
generated on September 13, 2017
Chapter 38: format | 110
Chapter 39
join
The join filter returns a string which is the concatenation of the items of a sequence:
Listing 39-1
1
2
{{ [1, 2, 3]|join }}
{# returns 123 #}
The separator between elements is an empty string per default, but you can define it with the optional
first parameter:
Listing 39-2
1
2
{{ [1, 2, 3]|join('|') }}
{# outputs 1|2|3 #}
Arguments
•
glue:
The separator
PDF brought to you by
generated on September 13, 2017
Chapter 39: join | 111
Chapter 40
json_encode
The json_encode filter returns the JSON representation of a value:
Listing 40-1
1
{{ data|json_encode() }}
Internally, Twig uses the PHP json_encode1 function.
Arguments
•
options:
A bitmask of json_encode options2 ({{
data|json_encode(constant('JSON_PRETTY_PRINT')) }})
1. http://php.net/json_encode
2. http://www.php.net/manual/en/json.constants.php
PDF brought to you by
generated on September 13, 2017
Chapter 40: json_encode | 112
Chapter 41
keys
The keys filter returns the keys of an array. It is useful when you want to iterate over the keys of an array:
Listing 41-1
1
2
3
{% for key in array|keys %}
...
{% endfor %}
PDF brought to you by
generated on September 13, 2017
Chapter 41: keys | 113
Chapter 42
last
New in version 1.12.2: The last filter was added in Twig 1.12.2.
The last filter returns the last "element" of a sequence, a mapping, or a string:
Listing 42-1
1
2
3
4
5
6
7
8
{{ [1, 2, 3, 4]|last }}
{# outputs 4 #}
{{ { a: 1, b: 2, c: 3, d: 4 }|last }}
{# outputs 4 #}
{{ '1234'|last }}
{# outputs 4 #}
It also works with objects implementing the Traversable1 interface.
1. http://php.net/manual/en/class.traversable.php
PDF brought to you by
generated on September 13, 2017
Chapter 42: last | 114
Chapter 43
length
New in version 1.33: Support for the __toString() magic method has been added in Twig 1.33.
The length filter returns the number of items of a sequence or mapping, or the length of a string.
For objects that implement the Countable interface, length will use the return value of the count()
method.
For objects that implement the __toString() magic method (and not Countable), it will return the
length of the string provided by that method.
Listing 43-1
1
2
3
{% if users|length > 10 %}
...
{% endif %}
PDF brought to you by
generated on September 13, 2017
Chapter 43: length | 115
Chapter 44
lower
The lower filter converts a value to lowercase:
Listing 44-1
1
2
3
{{ 'WELCOME'|lower }}
{# outputs 'welcome' #}
PDF brought to you by
generated on September 13, 2017
Chapter 44: lower | 116
Chapter 45
merge
The merge filter merges an array with another array:
Listing 45-1
1
2
3
4
5
{% set values = [1, 2] %}
{% set values = values|merge(['apple', 'orange']) %}
{# values now contains [1, 2, 'apple', 'orange'] #}
New values are added at the end of the existing ones.
The merge filter also works on hashes:
Listing 45-2
1
2
3
4
5
{% set items = { 'apple': 'fruit', 'orange': 'fruit', 'peugeot': 'unknown' } %}
{% set items = items|merge({ 'peugeot': 'car', 'renault': 'car' }) %}
{# items now contains { 'apple': 'fruit', 'orange': 'fruit', 'peugeot': 'car', 'renault': 'car' } #}
For hashes, the merging process occurs on the keys: if the key does not already exist, it is added but if the
key already exists, its value is overridden.
If you want to ensure that some values are defined in an array (by given default values), reverse the
two elements in the call:
Listing 45-3
1
2
3
4
5
{% set items = { 'apple': 'fruit', 'orange': 'fruit' } %}
{% set items = { 'apple': 'unknown' }|merge(items) %}
{# items now contains { 'apple': 'fruit', 'orange': 'fruit' } #}
Internally, Twig uses the PHP array_merge1 function. It supports Traversable objects by
transforming those to arrays.
1. http://php.net/array_merge
PDF brought to you by
generated on September 13, 2017
Chapter 45: merge | 117
Chapter 46
nl2br
New in version 1.5: The nl2br filter was added in Twig 1.5.
The nl2br filter inserts HTML line breaks before all newlines in a string:
Listing 46-1
1
2
3
4
5
6
7
{{ "I like Twig.\nYou will like it too."|nl2br }}
{# outputs
I like Twig.<br />
You will like it too.
#}
The nl2br filter pre-escapes the input before applying the transformation.
PDF brought to you by
generated on September 13, 2017
Chapter 46: nl2br | 118
Chapter 47
number_format
New in version 1.5: The number_format filter was added in Twig 1.5
The number_format filter formats numbers. It is a wrapper around PHP's number_format1 function:
Listing 47-1
1
{{ 200.35|number_format }}
You can control the number of decimal places, decimal point, and thousands separator using the
additional arguments:
Listing 47-2
1
{{ 9800.333|number_format(2, '.', ',') }}
To format negative numbers, wrap the number with parentheses (needed because of Twig's precedence
of operators:
Listing 47-3
1
2
{{ -9800.333|number_format(2, '.', ',') }} {# outputs : -9 #}
{{ (-9800.333)|number_format(2, '.', ',') }} {# outputs : -9,800.33 #}
If no formatting options are provided then Twig will use the default formatting options of:
• 0 decimal places.
• . as the decimal point.
• , as the thousands separator.
These defaults can be easily changed through the core extension:
Listing 47-4
1
2
3
4
5
$twig = new Twig_Environment($loader);
$twig->getExtension('Twig_Extension_Core')->setNumberFormat(3, '.', ',');
// before Twig 1.26
$twig->getExtension('core')->setNumberFormat(3, '.', ',');
The defaults set for number_format can be over-ridden upon each call using the additional parameters.
1. http://php.net/number_format
PDF brought to you by
generated on September 13, 2017
Chapter 47: number_format | 119
Arguments
•
•
•
decimal:
The number of decimal points to display
The character(s) to use for the decimal point
thousand_sep: The character(s) to use for the thousands separator
decimal_point:
PDF brought to you by
generated on September 13, 2017
Chapter 47: number_format | 120
Chapter 48
raw
The raw filter marks the value as being "safe", which means that in an environment with automatic
escaping enabled this variable will not be escaped if raw is the last filter applied to it:
Listing 48-1
1
2
3
{% autoescape %}
{{ var|raw }} {# var won't be escaped #}
{% endautoescape %}
Be careful when using the raw filter inside expressions:
Listing 48-2
1
2
3
4
5
6
7
8
9
10
{% autoescape %}
{% set hello = '<strong>Hello</strong>' %}
{% set hola = '<strong>Hola</strong>' %}
{{ false ? '<strong>Hola</strong>' : hello|raw }}
does not render the same as
{{ false ? hola : hello|raw }}
but renders the same as
{{ (false ? hola : hello)|raw }}
{% endautoescape %}
The first ternary statement is not escaped: hello is marked as being safe and Twig does not escape
static values (see escape). In the second ternary statement, even if hello is marked as safe, hola
remains unsafe and so is the whole expression. The third ternary statement is marked as safe and the
result is not escaped.
PDF brought to you by
generated on September 13, 2017
Chapter 48: raw | 121
Chapter 49
replace
The replace filter formats a given string by replacing the placeholders (placeholders are free-form):
Listing 49-1
1
2
3
4
{{ "I like %this% and %that%."|replace({'%this%': foo, '%that%': "bar"}) }}
{# outputs I like foo and bar
if the foo parameter equals to the foo string. #}
Arguments
•
from:
The placeholder values
format
PDF brought to you by
generated on September 13, 2017
Chapter 49: replace | 122
Chapter 50
reverse
New in version 1.6: Support for strings has been added in Twig 1.6.
The reverse filter reverses a sequence, a mapping, or a string:
Listing 50-1
1
2
3
4
5
6
7
{% for user in users|reverse %}
...
{% endfor %}
{{ '1234'|reverse }}
{# outputs 4321 #}
For sequences and mappings, numeric keys are not preserved. To reverse them as well, pass true as
an argument to the reverse filter:
Listing 50-2
1
2
3
4
5
6
7
8
9
10
11
{% for key, value in {1: "a", 2: "b", 3: "c"}|reverse %}
{{ key }}: {{ value }}
{%- endfor %}
{# output: 0: c
1: b
2: a #}
{% for key, value in {1: "a", 2: "b", 3: "c"}|reverse(true) %}
{{ key }}: {{ value }}
{%- endfor %}
{# output: 3: c
2: b
1: a #}
It also works with objects implementing the Traversable1 interface.
1. http://php.net/Traversable
PDF brought to you by
generated on September 13, 2017
Chapter 50: reverse | 123
Arguments
•
preserve_keys:
Preserve keys when reversing a mapping or a sequence.
PDF brought to you by
generated on September 13, 2017
Chapter 50: reverse | 124
Chapter 51
round
New in version 1.15.0: The round filter was added in Twig 1.15.0.
The round filter rounds a number to a given precision:
Listing 51-1
1
2
3
4
5
{{ 42.55|round }}
{# outputs 43 #}
{{ 42.55|round(1, 'floor') }}
{# outputs 42.5 #}
The round filter takes two optional arguments; the first one specifies the precision (default is 0) and the
second the rounding method (default is common):
•
rounds either up or down (rounds the value up to precision decimal places away from zero,
when it is half way there -- making 1.5 into 2 and -1.5 into -2);
• ceil always rounds up;
• floor always rounds down.
common
The // operator is equivalent to |round(0, 'floor').
Arguments
•
•
precision:
The rounding precision
method: The rounding method
PDF brought to you by
generated on September 13, 2017
Chapter 51: round | 125
Chapter 52
slice
New in version 1.6: The slice filter was added in Twig 1.6.
The slice filter extracts a slice of a sequence, a mapping, or a string:
Listing 52-1
1
2
3
4
5
6
7
{% for i in [1, 2, 3, 4, 5]|slice(1, 2) %}
{# will iterate over 2 and 3 #}
{% endfor %}
{{ '12345'|slice(1, 2) }}
{# outputs 23 #}
You can use any valid expression for both the start and the length:
Listing 52-2
1
2
3
{% for i in [1, 2, 3, 4, 5]|slice(start, length) %}
{# ... #}
{% endfor %}
As syntactic sugar, you can also use the [] notation:
Listing 52-3
1
2
3
4
5
6
7
8
9
10
11
{% for i in [1, 2, 3, 4, 5][start:length] %}
{# ... #}
{% endfor %}
{{ '12345'[1:2] }} {# will display "23" #}
{# you can omit the first argument -- which is the same as 0 #}
{{ '12345'[:2] }} {# will display "12" #}
{# you can omit the last argument -- which will select everything till the end #}
{{ '12345'[2:] }} {# will display "345" #}
The slice filter works as the array_slice1 PHP function for arrays and mb_substr2 for strings with a
fallback to substr3.
1. http://php.net/array_slice
2. http://php.net/mb-substr
3. http://php.net/substr
PDF brought to you by
generated on September 13, 2017
Chapter 52: slice | 126
If the start is non-negative, the sequence will start at that start in the variable. If start is negative, the
sequence will start that far from the end of the variable.
If length is given and is positive, then the sequence will have up to that many elements in it. If the variable
is shorter than the length, then only the available variable elements will be present. If length is given and
is negative then the sequence will stop that many elements from the end of the variable. If it is omitted,
then the sequence will have everything from offset up until the end of the variable.
It also works with objects implementing the Traversable4 interface.
Arguments
•
•
•
start:
The start of the slice
length: The size of the slice
preserve_keys: Whether to preserve key or not (when the input is an array)
4. http://php.net/manual/en/class.traversable.php
PDF brought to you by
generated on September 13, 2017
Chapter 52: slice | 127
Chapter 53
sort
The sort filter sorts an array:
Listing 53-1
1
2
3
{% for user in users|sort %}
...
{% endfor %}
Internally, Twig uses the PHP asort1 function to maintain index association. It supports Traversable
objects by transforming those to arrays.
1. http://php.net/asort
PDF brought to you by
generated on September 13, 2017
Chapter 53: sort | 128
Chapter 54
split
New in version 1.10.3: The split filter was added in Twig 1.10.3.
The split filter splits a string by the given delimiter and returns a list of strings:
Listing 54-1
1
2
{% set foo = "one,two,three"|split(',') %}
{# foo contains ['one', 'two', 'three'] #}
You can also pass a limit argument:
• If limit is positive, the returned array will contain a maximum of limit elements with the last
element containing the rest of string;
• If limit is negative, all components except the last -limit are returned;
• If limit is zero, then this is treated as 1.
Listing 54-2
1
2
{% set foo = "one,two,three,four,five"|split(',', 3) %}
{# foo contains ['one', 'two', 'three,four,five'] #}
If the delimiter is an empty string, then value will be split by equal chunks. Length is set by the limit
argument (one character by default).
Listing 54-3
1
2
3
4
5
{% set foo = "123"|split('') %}
{# foo contains ['1', '2', '3'] #}
{% set bar = "aabbcc"|split('', 2) %}
{# bar contains ['aa', 'bb', 'cc'] #}
Internally, Twig uses the PHP explode1 or str_split2 (if delimiter is empty) functions for string
splitting.
1. http://php.net/explode
PDF brought to you by
generated on September 13, 2017
Chapter 54: split | 129
Arguments
•
•
delimiter:
limit:
The delimiter
The limit argument
2. http://php.net/str_split
PDF brought to you by
generated on September 13, 2017
Chapter 54: split | 130
Chapter 55
striptags
The striptags filter strips SGML/XML tags and replace adjacent whitespace by one space:
Listing 55-1
1
{{ some_html|striptags }}
You can also provide tags which should not be stripped:
Listing 55-2
1
{{ some_html|striptags('<br><p>') }}
In this example, the <br/>, <br>, <p>, and </p> tags won't be removed from the string.
Internally, Twig uses the PHP strip_tags1 function.
Arguments
•
allowable_tags:
Tags which should not be stripped
1. http://php.net/strip_tags
PDF brought to you by
generated on September 13, 2017
Chapter 55: striptags | 131
Chapter 56
title
The title filter returns a titlecased version of the value. Words will start with uppercase letters, all
remaining characters are lowercase:
Listing 56-1
1
2
3
{{ 'my first car'|title }}
{# outputs 'My First Car' #}
PDF brought to you by
generated on September 13, 2017
Chapter 56: title | 132
Chapter 57
trim
New in version 1.32: The side argument was added in Twig 1.32.
New in version 1.6.2: The trim filter was added in Twig 1.6.2.
The trim filter strips whitespace (or other characters) from the beginning and end of a string:
Listing 57-1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
{{ '
I like Twig.
'|trim }}
{# outputs 'I like Twig.' #}
{{ '
I like Twig.'|trim('.') }}
{# outputs ' I like Twig' #}
{{ '
I like Twig.
'|trim(side='left') }}
{# outputs 'I like Twig. ' #}
{{ '
I like Twig.
'|trim(' ', 'right') }}
{# outputs ' I like Twig.' #}
Internally, Twig uses the PHP trim1, ltrim2, and rtrim3 functions.
Arguments
•
•
character_mask:
The characters to strip
side: The default is to strip from the left and the right (both) sides, but left and right will strip from
either the left side or right side only
1. http://php.net/trim
2. http://php.net/ltrim
3. http://php.net/rtrim
PDF brought to you by
generated on September 13, 2017
Chapter 57: trim | 133
Chapter 58
upper
The upper filter converts a value to uppercase:
Listing 58-1
1
2
3
{{ 'welcome'|upper }}
{# outputs 'WELCOME' #}
PDF brought to you by
generated on September 13, 2017
Chapter 58: upper | 134
Chapter 59
url_encode
New in version 1.12.3: Support for encoding an array as query string was added in Twig 1.12.3.
New in version 1.16.0: The raw argument was removed in Twig 1.16.0. Twig now always encodes
according to RFC 3986.
The url_encode filter percent encodes a given string as URL segment or an array as query string:
Listing 59-1
1
2
3
4
5
6
7
8
{{ "path-seg*ment"|url_encode }}
{# outputs "path-seg%2Ament" #}
{{ "string with spaces"|url_encode }}
{# outputs "string%20with%20spaces" #}
{{ {'param': 'value', 'foo': 'bar'}|url_encode }}
{# outputs "param=value&foo=bar" #}
Internally, Twig uses the PHP urlencode1 (or rawurlencode2 if you pass true as the first parameter)
or the http_build_query function. Note that as of Twig 1.16.0, urlencode always uses
rawurlencode (the raw argument was removed.)
1. http://php.net/urlencode
2. http://php.net/rawurlencode
PDF brought to you by
generated on September 13, 2017
Chapter 59: url_encode | 135
Chapter 60
attribute
New in version 1.2: The attribute function was added in Twig 1.2.
The attribute function can be used to access a "dynamic" attribute of a variable:
Listing 60-1
1
2
3
{{ attribute(object, method) }}
{{ attribute(object, method, arguments) }}
{{ attribute(array, item) }}
In addition, the defined test can check for the existence of a dynamic attribute:
Listing 60-2
1
{{ attribute(object, method) is defined ? 'Method exists' : 'Method does not exist' }}
The resolution algorithm is the same as the one used for the . notation, except that the item can be
any valid expression.
PDF brought to you by
generated on September 13, 2017
Chapter 60: attribute | 136
Chapter 61
block
When a template uses inheritance and if you want to print a block multiple times, use the block
function:
Listing 61-1
1
2
3
4
5
<title>{% block title %}{% endblock %}</title>
<h1>{{ block('title') }}</h1>
{% block body %}{% endblock %}
The block function can also be used to display one block of another template:
Listing 61-2
1
{{ block("title", "common_blocks.twig") }}
Use the defined test to check if a block exists in the context of the current template:
Listing 61-3
1
2
3
4
5
6
7
{% if block("footer") is defined %}
...
{% endif %}
{% if block("footer", "common_blocks.twig") is defined %}
...
{% endif %}
extends, parent
PDF brought to you by
generated on September 13, 2017
Chapter 61: block | 137
Chapter 62
constant
constant returns the constant value for a given string:
Listing 62-1
1
2
{{ some_date|date(constant('DATE_W3C')) }}
{{ constant('Namespace\\Classname::CONSTANT_NAME') }}
As of 1.12.1 you can read constants from object instances as well:
Listing 62-2
1
{{ constant('RSS', date) }}
Use the defined test to check if a constant is defined:
Listing 62-3
1
2
3
{% if constant('SOME_CONST') is defined %}
...
{% endif %}
PDF brought to you by
generated on September 13, 2017
Chapter 62: constant | 138
Chapter 63
cycle
The cycle function cycles on an array of values:
Listing 63-1
1
2
3
4
5
6
{% set start_year = date() | date('Y') %}
{% set end_year = start_year + 5 %}
{% for year in start_year..end_year %}
{{ cycle(['odd', 'even'], loop.index0) }}
{% endfor %}
The array can contain any number of values:
Listing 63-2
1
2
3
4
5
{% set fruits = ['apple', 'orange', 'citrus'] %}
{% for i in 0..10 %}
{{ cycle(fruits, i) }}
{% endfor %}
Arguments
•
position:
The cycle position
PDF brought to you by
generated on September 13, 2017
Chapter 63: cycle | 139
Chapter 64
date
New in version 1.6: The date function has been added in Twig 1.6.
New in version 1.6.1: The default timezone support has been added in Twig 1.6.1.
Converts an argument to a date to allow date comparison:
Listing 64-1
1
2
3
{% if date(user.created_at) < date('-2days') %}
{# do something #}
{% endif %}
The argument must be in one of PHP’s supported date and time formats1.
You can pass a timezone as the second argument:
Listing 64-2
1
2
3
{% if date(user.created_at) < date('-2days', 'Europe/Paris') %}
{# do something #}
{% endif %}
If no argument is passed, the function returns the current date:
Listing 64-3
1
2
3
{% if date(user.created_at) < date() %}
{# always! #}
{% endif %}
You can set the default timezone globally by calling setTimezone() on the core extension
instance:
Listing 64-4
1
2
3
4
5
$twig = new Twig_Environment($loader);
$twig->getExtension('Twig_Extension_Core')->setTimezone('Europe/Paris');
// before Twig 1.26
$twig->getExtension('core')->setTimezone('Europe/Paris');
1. http://php.net/manual/en/datetime.formats.php
PDF brought to you by
generated on September 13, 2017
Chapter 64: date | 140
Arguments
•
•
date:
The date
The timezone
timezone:
PDF brought to you by
generated on September 13, 2017
Chapter 64: date | 141
Chapter 65
dump
New in version 1.5: The dump function was added in Twig 1.5.
The dump function dumps information about a template variable. This is mostly useful to debug a
template that does not behave as expected by introspecting its variables:
Listing 65-1
1
{{ dump(user) }}
The dump function is not available by default. You must add the Twig_Extension_Debug
extension explicitly when creating your Twig environment:
Listing 65-2
1
2
3
4
5
$twig = new Twig_Environment($loader, array(
'debug' => true,
// ...
));
$twig->addExtension(new Twig_Extension_Debug());
Even when enabled, the dump function won't display anything if the debug option on the
environment is not enabled (to avoid leaking debug information on a production server).
In an HTML context, wrap the output with a pre tag to make it easier to read:
Listing 65-3
1
2
3
<pre>
{{ dump(user) }}
</pre>
Using a pre tag is not needed when XDebug1 is enabled and html_errors is on; as a bonus, the
output is also nicer with XDebug enabled.
You can debug several variables by passing them as additional arguments:
Listing 65-4
1
{{ dump(user, categories) }}
1. http://xdebug.org/docs/display
PDF brought to you by
generated on September 13, 2017
Chapter 65: dump | 142
If you don't pass any value, all variables from the current context are dumped:
Listing 65-5
1
{{ dump() }}
Internally, Twig uses the PHP var_dump2 function.
Arguments
•
context:
The context to dump
2. http://php.net/var_dump
PDF brought to you by
generated on September 13, 2017
Chapter 65: dump | 143
Chapter 66
include
New in version 1.12: The include function was added in Twig 1.12.
The include function returns the rendered content of a template:
Listing 66-1
1
2
{{ include('template.html') }}
{{ include(some_var) }}
Included templates have access to the variables of the active context.
If you are using the filesystem loader, the templates are looked for in the paths defined by it.
The context is passed by default to the template but you can also pass additional variables:
Listing 66-2
1
2
{# template.html will have access to the variables from the current context and the additional ones provided #}
{{ include('template.html', {foo: 'bar'}) }}
You can disable access to the context by setting with_context to false:
Listing 66-3
1
2
{# only the foo variable will be accessible #}
{{ include('template.html', {foo: 'bar'}, with_context = false) }}
Listing 66-4
1
2
{# no variables will be accessible #}
{{ include('template.html', with_context = false) }}
And if the expression evaluates to a Twig_Template or a Twig_TemplateWrapper instance, Twig
will use it directly:
Listing 66-5
1
2
3
4
5
6
7
8
9
// {{ include(template) }}
// deprecated as of Twig 1.28
$template = $twig->loadTemplate('some_template.twig');
// as of Twig 1.28
$template = $twig->load('some_template.twig');
$twig->display('template.twig', array('template' => $template));
When you set the ignore_missing flag, Twig will return an empty string if the template does not exist:
PDF brought to you by
generated on September 13, 2017
Chapter 66: include | 144
Listing 66-6
1
{{ include('sidebar.html', ignore_missing = true) }}
You can also provide a list of templates that are checked for existence before inclusion. The first template
that exists will be rendered:
Listing 66-7
1
{{ include(['page_detailed.html', 'page.html']) }}
If ignore_missing is set, it will fall back to rendering nothing if none of the templates exist, otherwise
it will throw an exception.
When including a template created by an end user, you should consider sandboxing it:
Listing 66-8
1
{{ include('page.html', sandboxed = true) }}
Arguments
•
•
•
•
•
template:
The template to render
The variables to pass to the template
with_context: Whether to pass the current context variables or not
ignore_missing: Whether to ignore missing templates or not
sandboxed: Whether to sandbox the template or not
variables:
PDF brought to you by
generated on September 13, 2017
Chapter 66: include | 145
Chapter 67
max
New in version 1.15: The max function was added in Twig 1.15.
max returns the biggest value of a sequence or a set of values:
Listing 67-1
1
2
{{ max(1, 3, 2) }}
{{ max([1, 3, 2]) }}
When called with a mapping, max ignores keys and only compares values:
Listing 67-2
1
2
{{ max({2: "e", 1: "a", 3: "b", 5: "d", 4: "c"}) }}
{# returns "e" #}
PDF brought to you by
generated on September 13, 2017
Chapter 67: max | 146
Chapter 68
min
New in version 1.15: The min function was added in Twig 1.15.
min returns the lowest value of a sequence or a set of values:
Listing 68-1
1
2
{{ min(1, 3, 2) }}
{{ min([1, 3, 2]) }}
When called with a mapping, min ignores keys and only compares values:
Listing 68-2
1
2
{{ min({2: "e", 3: "a", 1: "b", 5: "d", 4: "c"}) }}
{# returns "a" #}
PDF brought to you by
generated on September 13, 2017
Chapter 68: min | 147
Chapter 69
parent
When a template uses inheritance, it's possible to render the contents of the parent block when overriding
a block by using the parent function:
Listing 69-1
1
2
3
4
5
6
7
{% extends "base.html" %}
{% block sidebar %}
<h3>Table Of Contents</h3>
...
{{ parent() }}
{% endblock %}
The parent() call will return the content of the sidebar block as defined in the base.html template.
extends, block, block
PDF brought to you by
generated on September 13, 2017
Chapter 69: parent | 148
Chapter 70
random
New in version 1.5: The random function was added in Twig 1.5.
New in version 1.6: String and integer handling was added in Twig 1.6.
The random function returns a random value depending on the supplied parameter type:
• a random item from a sequence;
• a random character from a string;
• a random integer between 0 and the integer parameter (inclusive).
Listing 70-1
1
2
3
4
{{ random(['apple', 'orange', 'citrus']) }} {# example output:
{{ random('ABC') }}
{# example output:
{{ random() }}
{# example output:
function) #}
{{ random(5) }}
{# example output:
orange #}
C #}
15386094 (works as the native PHP mt_rand
3 #}
Arguments
•
values:
The values
PDF brought to you by
generated on September 13, 2017
Chapter 70: random | 149
Chapter 71
range
Returns a list containing an arithmetic progression of integers:
Listing 71-1
1
2
3
4
5
{% for i in range(0, 3) %}
{{ i }},
{% endfor %}
{# outputs 0, 1, 2, 3, #}
When step is given (as the third parameter), it specifies the increment (or decrement for negative values):
Listing 71-2
1
2
3
4
5
{% for i in range(0, 6, 2) %}
{{ i }},
{% endfor %}
{# outputs 0, 2, 4, 6, #}
Note that if the start is greater than the end, range assumes a step of -1:
Listing 71-3
1
2
3
4
5
{% for i in range(3, 0) %}
{{ i }},
{% endfor %}
{# outputs 3, 2, 1, 0, #}
The Twig built-in .. operator is just syntactic sugar for the range function (with a step of 1, or -1 if the
start is greater than the end):
Listing 71-4
1
2
3
{% for i in 0..3 %}
{{ i }},
{% endfor %}
The range function works as the native PHP range1 function.
PDF brought to you by
generated on September 13, 2017
Chapter 71: range | 150
Arguments
•
•
•
low:
The first value of the sequence.
The highest possible value of the sequence.
step: The increment between elements of the sequence.
high:
1. http://php.net/range
PDF brought to you by
generated on September 13, 2017
Chapter 71: range | 151
Chapter 72
source
New in version 1.15: The source function was added in Twig 1.15.
New in version 1.18.3: The ignore_missing flag was added in Twig 1.18.3.
The source function returns the content of a template without rendering it:
Listing 72-1
1
2
{{ source('template.html') }}
{{ source(some_var) }}
When you set the ignore_missing flag, Twig will return an empty string if the template does not exist:
Listing 72-2
1
{{ source('template.html', ignore_missing = true) }}
The function uses the same template loaders as the ones used to include templates. So, if you are using
the filesystem loader, the templates are looked for in the paths defined by it.
Arguments
•
•
name:
The name of the template to read
Whether to ignore missing templates or not
ignore_missing:
PDF brought to you by
generated on September 13, 2017
Chapter 72: source | 152
Chapter 73
template_from_string
New in version 1.11: The template_from_string function was added in Twig 1.11.
The template_from_string function loads a template from a string:
Listing 73-1
1
2
{{ include(template_from_string("Hello {{ name }}")) }}
{{ include(template_from_string(page.template)) }}
The template_from_string function is not available by default. You must add the
Twig_Extension_StringLoader extension explicitly when creating your Twig environment:
Listing 73-2
$twig = new Twig_Environment(...);
$twig->addExtension(new Twig_Extension_StringLoader());
Even if you will probably always use the template_from_string function with the include
function, you can use it with any tag or function that takes a template as an argument (like the
embed or extends tags).
Arguments
•
template:
The template
PDF brought to you by
generated on September 13, 2017
Chapter 73: template_from_string | 153
Chapter 74
constant
constant checks if a variable has the exact same value as a constant. You can use either global constants
or class constants:
Listing 74-1
1
2
3
{% if post.status is constant('Post::PUBLISHED') %}
the status attribute is exactly the same as Post::PUBLISHED
{% endif %}
You can test constants from object instances as well:
Listing 74-2
1
2
3
{% if post.status is constant('PUBLISHED', post) %}
the status attribute is exactly the same as Post::PUBLISHED
{% endif %}
PDF brought to you by
generated on September 13, 2017
Chapter 74: constant | 154
Chapter 75
defined
defined checks if a variable is defined in the current context. This is very useful if you use the
strict_variables option:
Listing 75-1
1
2
3
4
5
6
7
8
9
10
11
12
13
{# defined works with variable names #}
{% if foo is defined %}
...
{% endif %}
{# and attributes on variables names #}
{% if foo.bar is defined %}
...
{% endif %}
{% if foo['bar'] is defined %}
...
{% endif %}
When using the defined test on an expression that uses variables in some method calls, be sure that
they are all defined first:
Listing 75-2
1
2
3
{% if var is defined and foo.method(var) is defined %}
...
{% endif %}
PDF brought to you by
generated on September 13, 2017
Chapter 75: defined | 155
Chapter 76
divisible by
New in version 1.14.2: The divisible by test was added in Twig 1.14.2 as an alias for divisibleby.
divisible by checks if a variable is divisible by a number:
Listing 76-1
1
2
3
{% if loop.index is divisible by(3) %}
...
{% endif %}
PDF brought to you by
generated on September 13, 2017
Chapter 76: divisible by | 156
Chapter 77
empty
New in version 1.33: Support for the __toString() magic method has been added in Twig 1.33.
empty checks if a variable is an empty string, an empty array, an empty hash, exactly false, or exactly
null.
For objects that implement the Countable interface, empty will check the return value of the count()
method.
For objects that implement the __toString() magic method (and not Countable), it will check if an
empty string is returned.
Listing 77-1
1
2
3
{% if foo is empty %}
...
{% endif %}
PDF brought to you by
generated on September 13, 2017
Chapter 77: empty | 157
Chapter 78
even
even returns true if the given number is even:
Listing 78-1
1
{{ var is even }}
odd
PDF brought to you by
generated on September 13, 2017
Chapter 78: even | 158
Chapter 79
iterable
New in version 1.7: The iterable test was added in Twig 1.7.
iterable checks if a variable is an array or a traversable object:
Listing 79-1
1
2
3
4
5
6
7
8
9
{# evaluates to true if the foo variable is iterable #}
{% if users is iterable %}
{% for user in users %}
Hello {{ user }}!
{% endfor %}
{% else %}
{# users is probably a string #}
Hello {{ users }}!
{% endif %}
PDF brought to you by
generated on September 13, 2017
Chapter 79: iterable | 159
Chapter 80
null
null returns true if the variable is null:
Listing 80-1
1
{{ var is null }}
none is an alias for null.
PDF brought to you by
generated on September 13, 2017
Chapter 80: null | 160
Chapter 81
odd
odd returns true if the given number is odd:
Listing 81-1
1
{{ var is odd }}
even
PDF brought to you by
generated on September 13, 2017
Chapter 81: odd | 161
Chapter 82
same as
New in version 1.14.2: The same as test was added in Twig 1.14.2 as an alias for sameas.
same as checks if a variable is the same as another variable. This is the equivalent to === in PHP:
Listing 82-1
1
2
3
{% if foo.attribute is same as(false) %}
the foo attribute really is the 'false' PHP value
{% endif %}
PDF brought to you by
generated on September 13, 2017
Chapter 82: same as | 162
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement