INTRODUCTION
PK-2UA0-A-EL
The KVM switch allows a single keyboard, video display monitor, and mouse to be switched to access multiple computers. The switch provides more table space in addition to saving the cost of multiple keyboards and monitors.
FEATURES
z Access multiple PCs with one set of Keyboard, Mouse, Monitor and one port USB 2.0
Device.. z Space saving and cost effective. z Front panel LEDs indicate which PC is selected. z Select PCs by using front panel SELECT button or Hot Key command. z Auto Scan Mode sequences through PC. z Supports SVGA , VGA and multi-sync Monitors, resolutions up to 2048*1536 z The USB port compliant with USB specification Ver 2.0 (Data Rate 1.5/12/480Mbps). z Can switch independent KVM and USB device. z Buzz for switching confirmation. z Windows 98, Me, 2000, XP, Vista and Linux OS compatible.
SPECIFICATION
Function
Model No.
PC Port
Device Port
Cable Length
PC Port LED
Cable Connector
Selected
PC
KVM
Console
KVM
Connector
Keyboard
Mouse
USB
Monitor
USB Power
Module Weight
Module Dimension (L x W x H)
Emission
Specification
PK-2UA0-A-EL
2
2 x PS/2 Device
1 x USB Device
1.8 m
2 x Green Color LED
2 x PS/2 Mini-DIN-6 Male
1 x USB Type A Male (while)
1 x HDB -15 Male (blue)
1 x USB Type A Male (while)
1 x HDB -15 Male (block)
2 x HDB-15 Female (block)
2 x USB Type A Female (while)
1 x PS/2 Mini-DIN-6 Female
1 x PS/2 Mini-DIN-6 Female
1 x USB Type A Female (while)
1 x HDB-15 Female (blue)
Bus Power
104.2 g
110 x 66 x 22 mm
CE, FCC, C-Tick
PACKAGE CONTENTS
z 1 x 2-port PS/2 KVM with USB switch z 1 x User manual z 2 x Cables
Cables included in the box
Cables:
‧ PS/2 cable for keyboard and mouse ports
Mini-DIN6 male/male
‧ Standard VGA cable for monitor port
HDDB15 male/male with thumbscrews
Mini-DIN6
HDDB 15
Configuration
After installation, you can either choose the “SELECT” button that leads you through multiple computers or Hot Key controls.
The SELECT button
Keyboard Hot Key Menu:
Press Scroll Lock twice, and you will hear an audible switching confirmation tone to ensure you are already in the Hot Key Mode (LED is blinking), then Pressing either number 1, number 2, F1, or F2 to switch from one computer to another.
In the Auto Scan mode, the KVM switch remains on one port for 10 seconds before switching to the next. Please notice that the mouse and keyboard control will be restricted in the Auto Scan mode.
P.S: Escape from Hot Key Mode, if you don’t press any buttons after 4 or 5 seconds.
Note:
This KVM Switch will not detect whether a computer is on or off if the “Power On” function is set in the Bios. Meaning, when you switch to the computer that is turned off, there will be nothing displayed on the monitor.
Troubleshooting
Keyboard/Mouse
Q: The keyboard/mouse is not detected, error reported, or doesn’t work after boot up.
A:
Shut down the computer.
Check out cable connection and make sure they are attached properly.
Reboot computer.
Call your dealer if there are any wrong, missing, or damaged parts. Keep the carton, including the original packing materials, to repack the KVM Switch if there is a need to return it for repair.
