TE Connectivity 1374463-4 patch panel Datasheet
Below you will find brief information for Fiber Optic Patch Cords, Fiber Optic Cables. This reference guide provides information on TE Connectivity's fiber optic solutions. It covers a range of products including fiber cable assemblies, trunk solutions, patch cords, and other accessories. The guide aims to help users understand the benefits of these solutions and their applications in various networking environments.
Advertisement
Advertisement
Fiber Products
Fiber Solutions Reference Guide ....................................................................1-3
Fiber Cable Assemblies .......................................................................................1-7
Fiber Trunk Solutions ......................................................................................1-7
10/40/100 MIGRATION ..................................................................................1-7
Fiber Optic Patch Cords .............................................................................. 1-18
Fiber Optic Cables and Field Terminated Connectors ......................1-22
Fiber Enclosures .................................................................................................. 1-57
High Density Equipment Panel ...............................................................1-58
Q3000 ..................................................................................................................1-61
UCP .......................................................................................................................1-62
TFP ........................................................................................................................1-68
RMG/AMP NETCONNECT .........................................................................1-78
Core Vertical Switch Management (VSM) .........................................1-87
Optical Distribution Frame Solutions ................................................. 1-94
OMX ......................................................................................................................1-112
Storage Area Management (SAN Fiber Channel Management) 1-114
Optical LAN Solution Supporting PON Technologies .......................1-117
Fiber Optic Accessories and Tooling ........................................................1-135
Fiber Optic Test Equipment ......................................................................... 1-150
1-1 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber Products
For decades, TE has been a leading global fiber infrastructure provider. TE fiber connectivity solutions assure smooth integration of new equipment for all networks, as well as long-term reliability and flexibility that are so critical for your business.
Optical fiber is the backbone of the world's global information infrastructure — the conduit enabling society's ever-increasing reliance on high-speed, media-rich communications. TE is a pioneer in optical communications technologies, making optical fiber more reliable, better performing, easier and more cost effective to install. With over seven decades of research, development and real-world deployment experience with our legacy brands including AMP, Raychem, ADC and
Bell Laboratories, fiber is in our DNA. TE’s innovative fiber infrastructure solutions can help provide peak performance with solution-specific density, modularity and functionality. Due to the demands of today’s internet and mobile network boom, the amount of data transmitted at the enterprise business level is rapidly climbing as networks need to support more devices and advanced applications than ever before. Fiber counts are on the rise and TE solutions help you build a migration path to get from
10GbE to 40 and 100GbE in a simple and cost-effective manner.
TE's fiber product line can help you achieve a higher level of network understanding, manageability and security.
1-2 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Solutions Guide
1
4
5
2
3
Fiber Optic OM2 Solution
19-Inch Rack
2 post, 3" deep 1933559-1
4 post adjustable 1933570-1
Dual
Quad
6-Fiber
12-Fiber
24-Fiber
6-Fiber
12-Fiber
24-Fiber
TFP
TFP Adapters
SC/SC Duplex
SC/LC Duplex
LC/LC Duplex
1
Horizontal 2RU panel
Double-sided vertical manager
Interconnect
3
Cable Management
Single sided
Double sided
6"
6" Combination
Indoor Cable
2
Distribution
Riser
1933532-1
1933533-1
1933534-1
1933540-1
Plenum Riser
1-1553416-2
1-1553418-2
Plenum
1-1553417-2
1-1553419-2
2RU
5RU
1-1553307-2
1-1553311-2
3
Riser
Indoor/Outdoor Cable
Plenum
6-1553342-2
6-1553346-2
6-1553348-2
6-1553343-2
6-1553347-2
1RU
3
1-1553315-2
Outdoor Cable
1-1553316-2
All Dielectric Armored
6-1553387-2
6-1553389-2
6-1553349-2
TFP-1TT00-000B
6-1553390-2
Patch Panels
4
6-1553397-2
6-1553399-2
6-1553400-2
1RU
RMG
1-1553308-2
1-1553312-2
2RU
4RU
6 SC Duplex
12 LC Duplex
1 m
PAT-SCSC-R20C001M
PAT-LCSC-R20C001M
PAT-LCLC-R20C001M
TFP-2TT00-000B
TFP-5TT00-000B
TFP-12APLC3 and
TFP-12APRC3
TFP-24APLQ1 and
TFP-24APRQ1
Patch Cords
2 m
PAT-SCSC-R20C002M
PAT-LCSC-R20C002M
PAT-LCLC-R20C002M
5
RMG Adapters
3 m
PAT-SCSC-R20C003M
PAT-LCSC-R20C003M
PAT-LCLC-R20C003M
6 SC Duplex
12 LC Duplex
5 m
PAT-SCSC-R20C005M
PAT-LCSC-R20C005M
PAT-LCLC-R20C005M
Armored
Plenum
2-1777121-7
2-1777117-7
1-1553420-2
RMG-1000-000B
RMG-2000-000B
RMG-4000-000B
RMG-12ADPC3
RMG-24ADPQ3
1-3 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Solutions Guide
1
4
5
2
3
Fiber Optic OM3 Solution
19-Inch Rack
2 post, 3" deep 1933559-1
4 post adjustable 1933570-1
Dual
Quad
6-Fiber
12-Fiber
24-Fiber
6-Fiber
12-Fiber
24-Fiber
TFP
1
Horizontal 2RU panel
Double-sided vertical manager
3
Cable Management
Single sided
Double sided
6"
6" Combination
Indoor Cable
2
Distribution
Riser
1933532-1
1933533-1
1933534-1
1933540-1
Plenum Riser
3-1553416-9
Interconnect
Plenum
3-1553417-9
3-1553418-9 3-1553419-9
3-1553307-9
3-1553311-9
3-1553308-9
3-1553312-9
3
Riser
Indoor/Outdoor Cable
Plenum
6-1553342-4
6-1553346-4
6-1553348-4
6-1553343-4
6-1553347-4
1RU
2RU
5RU
3
3-1553315-9
Outdoor Cable
3-1553316-9
All Dielectric Armored
6-1553387-4
6-1553389-4
6-1553349-4
TFP-1TT00-000B
6-1553390-4
Patch Panels
4
TFP-2TT00-000B
TFP-5TT00-000B
RMG
6-1553397-4
6-1553399-4
6-1553400-4
1RU
2RU
4RU
TFP Adapters
SC/SC Duplex
SC/LC Duplex
LC/LC Duplex
6 SC Duplex
12 LC Duplex
1 m
PAT-SCSC-R30C001M
PAT-LCSC-R30C001M
PAT-LCLC-R30C001M
TFP-12APLC4 and
TFP-12APRC4
TFP-24APLQ2 and
TFP-24APRQ2
Patch Cords
2 m
PAT-SCSC-R30C002M
PAT-LCSC-R30C002M
PAT-LCLC-R30C002M
5
RMG Adapters
3 m
PAT-SCSC-R30C003M
PAT-LCSC-R30C003M
PAT-LCLC-R30C003M
6 SC Duplex
12 LC Duplex
5 m
PAT-SCSC-R30C005M
PAT-LCSC-R30C005M
PAT-LCLC-R30C005M
Armored
Plenum
3-1777121-7
3-1777117-7
3-1553420-9
RMG-1000-000B
RMG-2000-000B
RMG-4000-000B
RMG-12ADPC4
RMG-24ADPQ4
1-4 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Solutions Guide
1
4
5
2
3
Fiber Optic OM4 Solution
19-Inch Rack
2 post, 3" deep
4 post adjustable
1933559-1
1933570-1
Dual
Quad
6-Fiber
12-Fiber
24-Fiber
6-Fiber
12-Fiber
24-Fiber
TFP
TFP Adapters
SC/LC Duplex
LC/LC Duplex
1
Horizontal 2RU panel
Double-sided vertical manager
3
Cable Management
Single sided
Double sided
2
6"
6" Combination
Indoor Cable
Distribution
Riser
1933532-1
1933533-1
1933534-1
1933540-1
Plenum Riser
4-1553416-9
4-1553418-9
Interconnect
Plenum
4-1553417-9
4-1553419-9
3
Riser
Indoor/Outdoor Cable
Plenum
6-1553342-5
6-1553346-5
6-1553348-5
6-1553343-5
6-1553347-5
6-1553349-5
1RU
2RU
5RU
6 SC Duplex
TFP-1TT00-000B
Patch Panels
TFP-2TT00-000B
TFP-5TT00-000B
TFP-12APLC4 and
TFP-12APRC4
3
4-1553307-9
4-1553311-9
4-1553315-9
4-1553308-9
4-1553312-9
4-1553316-9
Outdoor Cable
All Dielectric Armored
6-1553387-5
6-1553389-5
6-1553390-5
4
RMG
RMG Adapters
6-1553397-5
6-1553399-5
6-1553400-5
1RU
2RU
4RU
6 SC Duplex
12 LC Duplex
TFP-24APLQ2 and
TFP-24APRQ2
Patch Cords
2 m
12 LC Duplex
1 m
PAT-LCSC-R40C001M
PAT-LCLC-R40C001M
PAT-LCSC-R40C002M
PAT-LCLC-R40C002M
5
3 m
PAT-LCSC-R40C003M
PAT-LCLC-R40C003M
5 m
PAT-LCSC-R40C005M
PAT-LCLC-R40C005M
Armored
Plenum
7-1777121-7
7-1777117-7
4-1553420-9
RMG-1000-000B
RMG-2000-000B
RMG-4000-000B
RMG-12ADPC4
RMG-24ADPQ4
1-5 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Solutions Guide
1
4
5
2
3
Fiber Optic Singlemode Solution
2 post, 3" deep
4 post adjustable
Dual
Quad
6-Fiber
12-Fiber
24-Fiber
6-Fiber
12-Fiber
24-Fiber
TFP
TFP Adapters
SC/LC Duplex
LC/LC Duplex
19-Inch Rack
1933559-1
1933570-1
1
Horizontal 2RU panel
Double-sided vertical manager
3
Cable Management
2
Single-sided
Double-sided
1933532-1
1933533-1
6"
6" Combination
Indoor Cable
Distribution
Riser
1933534-1
1933540-1
Plenum Riser
7-1553416-3
7-1553418-3
Interconnect
Plenum
7-1553417-3
7-1553419-3
3
Riser
Indoor/Outdoor Cable
Plenum
6-1553342-3
6-1553346-3
6-1553348-3
6-1553343-3
6-1553347-3
6-1553349-3
1RU
2RU
5RU
6 SC Duplex
TFP-1TT00-000B
Patch Panels
TFP-2TT00-000B
TFP-5TT00-000B
TFP-12APLC8 and
TFP-12APRC8
3
7-1553307-3
7-1553311-3
7-1553315-3
7-1553308-3
7-1553312-3
7-1553316-3
Outdoor Cable
All Dielectric Armored
6-1553387-3
6-1553389-3
6-1553390-3
4
RMG
RMG Adapters
6-1553397-3
6-1553399-3
6-1553400-3
1RU
2RU
4RU
6 SC Duplex
12 LC Duplex
TFP-24APLQ5 and
TFP-24APRQ5
Patch Cords
2 m
12 LC Duplex
1 m
PAT-LCSC-RS0C001M
PAT-LCLC-RS0C001M
PAT-LCSC-RS0C002M
PAT-LCLC-RS0C002M
5
3 m
PAT-LCSC-RS0C003M
PAT-LCLC-RS0C003M
5 m
PAT-LCSC-RS0C005M
PAT-LCLC-RS0C005M
Armored
Plenum
4-1777121-7
4-1777117-7
7-1553420-3
RMG-1000-000B
RMG-2000-000B
RMG-4000-000B
RMG-12ADPC8
RMG-24ADPQ8
1-6 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Cable Assemblies
Fiber Trunk Solutions
24-FIBER MPOPTIMATE SYSTEM FOR 10/40/100 MIGRATION
Bandwidth and storage demand is expanding at a breathtaking rate. The environment is rapidly evolving. The impact on data center design and management is profound. Networks will migrate from 10 to 40 to 100 Gigabit/ second Ethernet speeds dynamically, and data center managers and designers need to be able to manage this migration to maximize network efficiency and responsiveness while minimizing cost.
TE's 24-Fiber MPOptimate system can take you from 10 to 40 and even 100GbE and beyond. Consisting of the 24-fiber trunk cables from the back of the fiber panels to the equipment distribution area, this system can help you migrate your applications, increase bandwidth and flexibility as well as capture much needed space in the rack.
TE's data center fiber trunking and interconnect system provides a simple yet robust migration pathway with the following advantages:
• A single trunking format that can be replicated and upgraded simply and flexibly
• Unified solutions for 10, 40 and 100 GbE applications
• Pre-engineered paths and polarity
• Higher fiber utilization versus 12 fiber systems
• Fewer trunks, connections and components
• Standardized practices for design, installation, documentation and troubleshooting
• Component and trunk re-use
• Minimized waste of space, time and money
For more information, visit www.te.com/DataCenterMigration.
Universal Connectivity Platform
Q3000
RMG
High Density
Equipment Panel
*100G implemented as 4x25G
†100G implemented as 10x10G
1-7 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Cable Assemblies
Universal Connectivity Platform (UCP) 24-Fiber 10 Gigabit Interconnect
The 10 Gigabit Interconnect Solution, like all of the planned migration designs, employs a 24-fiber optical trunk with a single
MPO-type connector at each end. A trunk interfaces with the rear of a 24-fiber UCP cassette that breaks out the trunk fibers into twelve duplex LC connections at the front, supporting 24 fibers per cassette. This cassette resides in a time-proven
UCP panel which provides cable management and protection for both the MPOs at the rear and LC cords at the front. UCP enclosures are stackable and support up to 48 duplex LCs (96 fibers) per rack unit (RU). They can be populated all at once, or added to by upgrading one cassette at a time in the future. The UCP enclosure also supports high density 10 Gigabit modules, as well as 40 and 100 GbE versions, allowing an upgrade path by changing the cassette at the front and using existing and additional 24-fiber trunks at the rear.
Example of 10/40/100 GbE 24-Fiber Design
3 24-Fiber MPO Trunk A-Polarity (Type A)
F
M
24-Fiber
Cassette
L L L L L L
2
1
LC-Duplex
A-B Patch Cord
4
F
M
24-Fiber
Cassette
L L L L L
1
L
LC-Duplex
A-B Patch Cord
LC-MPO Cassette 24-Fiber Trunk UCP 1 RU Panel UCP 1 RU Drawer
DESIGN GUIDES FOR 10/40/100 GbE MIGRATION
For in-depth 10/40/100 design guides, see the following literature on www.te.com/DataCenterMigration
• Universal Connectivity Platform Design Guide literature #317291AE
• Q3000 Design Guide literature #315924AE
• RMG Design Guide literature #315990AE
• High Density Equipment Panel Design Guide literature #318339AE
1-8 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Cable Assemblies
Fiber Trunk Solutions
TE Connectivity's plug-and-play MPO trunk assemblies are round 12-fiber optical trunk cables pre-terminated with a high-density MPO connector on both ends. They can be used in conjunction with any of the other plug-and-play connectivity products to rapidly deploy fiber into a data center or Local Area Network (LAN).
The microcable assemblies can simply be plugged into any plug-and-play cassette or fiber enclosure which eliminates the need for on-site fiber termination.
FEATURES
• Available in OM1, OM2, OM3, OM4 and singlemode glass types
• Compatible with FiberGuide optical raceway system to add increased protection and manageability
• Pulling socks or stealth pulling eye protect MPO connectors during installation
• Factory terminated and tested
• 12 and 24 fiber trunks available on either interconnect-rated or backbone-rated cable styles
MPO Cable Assemblies
ORDERING INFORMATION
MPO Trunk Assemblies
OM4 MPO Trunk Assemblies
OM4 MPO-MPO, 12-fiber 3 mm interconnect, plenum (OFNP) rated
OM4 MPO-MPO, 24-fiber backbone (2x12) with 3 mm interconnect subunits, OFNP/OFNP
OM3 MPO Trunk Assemblies
OM3 MPO-MPO, 12-fiber 3 mm interconnect, plenum (OFNP) rated
OM3 MPO-MPO, 24-fiber backbone (2 x 12) with 3 mm interconnect subunits, OFNR/OFNP
OM2 MPO Trunk Assemblies
OM2 MPO-MPO, 12-fiber 3 mm interconnect, plenum (OFNP) rated
OM2 MPO-MPO, 24 (2 x 12) with 3 mm interconnect subunits, OFNR/OFNP
OM1 MPO Trunk Assemblies
OM1 MPO-MPO, 12-fiber 3 mm interconnect, plenum (OFNP) rated
OM1 MPO-MPO, 24-fiber backbone (2 x 12) 3 mm interconnect subunits, OFNR/OFNP
Singlemode Trunk Assemblies
OS2 Singlemode, 12-fiber, 12-fiber 3 mm interconnect, plenum (OFNP) rated
OS2 Singlemode, 24-fiber, 24 (2 x 12) Fiber backbone with 3 mm interconnect subunits, plenum (OFNP) rated
Note: xxx denotes length in feet of overall trunk, 001=1 foot, 010=10 feet, 100=100 feet
Note: yy denotes breakout definition for each end
SS=Standard, AA=TFP to TFP, AB=TFP to ODF, BB=ODF to ODF, FF=RMG to RMG, NN=No breakout for 12-fiber interconnect cable
Part Number
MPA-NCNCJ40xxxF-NN
MPA-NCNCD40xxxF-yy
MPA-NCNCJ30xxxF-NN
MPA-NCNCD30xxxF-yy
MPA-NCNCJ20xxxF-NN
MPA-NCNCD20xxxF-yy
MPA-NCNCJ10xxxF-NN
MPA-NCNCD10xxxF-yy
MPA-NCNCJ50xxxF-NN
MPA-NCNCD50xxxF-yy
1-9 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Cable Assemblies
TE’s High Fiber Count Plug-and-Play Trunks
TE’s high fiber count plug-and-play trunks provide the backbone cabling for TE's
Plug-and-Play system. These high count trunk cables come pre-terminated with a high-density MPO connectors on both ends and provide an easy and efficient way to pull large numbers of fibers at one time to help in the rapid deployment of the Plug-and-Play system either in the data center or Local Area Network (LAN).
Each trunk has custom breakouts designed to work with the TE Plug-and-Play connectivity. TE's high fiber count trunks can simply be plugged into any plug-andplay cassette in the optical distribution frame or fiber enclosure which eliminates the need for on-site fiber termination and preparation.
FEATURES
• Construction of rugged loose-tube fiber cable
• Ship with a pulling sock on one end to aid with installation
• Cable assemblies contain OFNP flame rated cable
• Breakouts specifically designed to work with TE's Plug-and-Play connectivity
ORDERING INFORMATION
OM4 High Fiber Count Trunks
24-fiber, MPO-MPO (no pins), OFNP rated
24-fiber, MPO-MPO (no pins) 3 mm dual zip, OFNP rated
48-fiber, MPO-MPO (no pins) 3mm round, OFNP rated
72-fiber, MPO-MPO (no pins) 3 mm round, OFNP rated
96-fiber, MPO-MPO (no pins) 3 mm round, OFNP rated
OM3 High Fiber Count Trunks
24-fiber, MPO-MPO (no pins), OFNP rated
24-fiber, MPO-MPO (no pins) 3 mm dual zip, OFNP rated
48-fiber, MPO-MPO (no pins) 3 mm round, OFNP rated
72-fiber, MPO-MPO (no pins) 3 mm round, OFNP rated
96-fiber, MPO-MPO (no pins) 3 mm round, OFNP rated
Singlemode High Fiber Count Trunks
24-fiber, MPO-MPO (no pins), OFNP rated
24-fiber, MPO-MPO (no pins) 3 mm dual zip, OFNP rated
48-fiber, MPO-MPO (no pins) 3 mm round, OFNP rated
72-fiber, MPO-MPO (no pins) 3 mm round, OFNP rated
96-fiber, MPO-MPO (no pins) 3 mm round, OFNP rated
Part Number
MPA-NCNCD40xxxF-yy
MPA-NCNCZ40xxxF-yy
MPA-NCNC440xxxF-yy
MPA-NCNC740xxxF-yy
MPA-NCNC940xxxF-yy
MPA-NCNCD30xxxF-yy
MPA-NCNCZ30xxxF-yy
MPA-NCNC430xxxF-yy
MPA-NCNC730xxxF-yy
MPA-NCNC930xxxF-yy
MPA-NCNCD50xxxF-yy
MPA-NCNCZ50xxxF-yy
MPA-NCNC450xxxF-yy
MPA-NCNC750xxxF-yy
MPA-NCNC950xxxF-yy
Note: xxx denotes length in feet of overall trunk, 001=1 foot, 010=10 feet, 100=100 feet
Note: yy denotes breakout definition for each end
SS=Standard, AA=TFP to TFP, AB=TFP to ODF, BB=ODF to ODF, FF=RMG to RMG
1-10 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Cable Assemblies
TE’s High Fiber Count Plug-and-Play Array Cables
TE’s 12-fiber plug-and-play array cables provide a convenient and efficient method to connect active equipment into the network. These 12-fiber round 3 mm cables contain a pre-terminated high-density MPO pinned connector on one end and either LC or SC connectors on the other. TE's 12-fiber plug-and-play array cable assemblies can simply be mated to any non-pinned MPO assembly in the optical distribution frame or fiber enclosure or plugged into any MPO transceiver which eliminates the need for on-site fiber termination and preparation.
FEATURES
• Round design with outer diameter of 3 mm eliminates preferential bend issues which results in increased density and greater manageability
• Each LC or SC leg is clearly labeled and identified
• Custom lengths available upon request
• Standard breakout length is 18 inches, which is optimum to connect to active equipment
• MPO pinned array cable assemblies mate to any non-pinned MPO assembly
ORDERING INFORMATION
OM4 High Fiber Count Trunks
MPO pinned - LC; 18" breakout; 3 m length
MPO pinned - LC; 18" breakout; 4 m length
MPO pinned - LC; 18" breakout; 5 m length
MPO pinned - SC; 18" breakout; 3 m length
MPO pinned - SC; 18" breakout; 4 m length
MPO pinned - SC; 18" breakout; 5 m length
OM3 High Fiber Count Trunks
MPO pinned - LC; 18" breakout; 3 m length
MPO pinned - LC; 18" breakout; 4 m length
MPO pinned - LC; 18" breakout; 5 m length
MPO pinned - SC; 18" breakout; 3 m length
MPO pinned - SC; 18" breakout; 4 m length
MPO pinned - SC; 18" breakout; 5 m length
Singlemode High Fiber Count Trunks
MPO pinned - LC/UPC; 18" breakout; 3 m length
MPO pinned - LC/UPC; 18" breakout; 4 m length
MPO pinned - LC/UPC; 18" breakout; 5 m length
MPO pinned - SC/UPC; 18" breakout; 3 m length
MPO pinned - SC/UPC; 18" breakout; 4 m length
MPO pinned - SC/UPC; 18" breakout; 5 m length
Part Number
MPA-PCLCJ40003M-NC
MPA-PCLCJ40004M-NC
MPA-PCLCJ40005M-NC
MPA-PCSCJ40003M-NC
MPA-PCSCJ40004M-NC
MPA-PCSCJ40005M-NC
MPA-PCLCJ30003M-NC
MPA-PCLCJ30004M-NC
MPA-PCLCJ30005M-NC
MPA-PCSCJ30003M-NC
MPA-PCSCJ30004M-NC
MPA-PCSCJ30005M-NC
MPA-PCLCJ50003M-NC
MPA-PCLCJ50004M-NC
MPA-PCLCJ50005M-NC
MPA-PCSCJ50003M-NC
MPA-PCSCJ50004M-NC
MPA-PCSCJ50005M-NC
1-11 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Cable Assemblies
Fiber Trunk Configurator
B
T
C
A
E
F
Performance/Polarity
Standard Performance Polarity C
Standard Performance Polarity A
Standard Performance Polarity B
OPTIMATE Polarity A
OPTIMATE Polarity C
OPTIMATE Polarity B
Connector A Type
N
P
C
E
1
2
A
H
12-Fiber MPO w/o pins
12-Fiber MPO with pins
12-Fiber MPO Secure w/o pins
12-Fiber MPO Secure with pins
24 Fiber MPO with pins
24 Fiber MPO w/o pins
24 Fiber MPO Secure with pins
24 Fiber MPO Secure w/o pins
Connector A Color
C
0
B
Non-secure
Red
G
Y
N
Blue
Green
Yellow
Orange
W
S
V
P
A
F
M
S
T
H
L
2
A
7
6
8
9
Connector B Type
N
P
C
E
1
12-Fiber MPO w/o pins
12-Fiber MPO w/pins
12-Fiber MPO Secure w/o pins
12-Fiber MPO Secure w/pins
24 Fiber MPO w/pins
24 Fiber MPO w/o pins
24 Fiber MPO Secure w/pins
24 Fiber MPO Secure w/o pins
LC Duplex
SC Duplex
ST Dual
FC Dual
MT-RJ plug w/o pins
LC Duplex Secure
W
0
MT-RJ plug Secure w/o pins
LC/APC Duplex
SC/APC Duplex
MT-RJ plug w/pins
Stub/pigtail
Brown
Slate
Violet
Rose
Aqua
Connector B Color
C
0
Non-secure
B
G
Y
Red
Blue
Green
Yellow
N Orange
W
S
V
P
A
Brown
Slate
Violet
Rose
Aqua
Part Number
MP__ – __ __ __ __ __ __ __ __ __ __ __ – __ __
N
S
U
XX
A
B
C
F
Breakout Length (L2 & L3)
TFP
NGF
L2 L3
30.50"
13.75"
Customer length 18"
RMG 25"
No breakout NA
Standard 36"
Customer length 79"
Custom 10"-99"
Unit of Measure
F
M
Feet
Meters
Assembly Length
001 Shortest possible length
999 Longest possible length
Cable Jacket Color
0 Standard
Cable Type
Use charts below
OM2
J2
12
D2
Z2
OM1
J1
11
D1
Z1
OM3
J3
13
D3
M3
Z3
12-Fiber 3 mm interconnect, OFNP
12-Fiber backbone, 1x12F, 3 mm interconnect Subunit, OFN
24-Fiber backbone, 2x12F, 3 mm interconnect subunits, OFNP
24-Fiber 3.0 mm interconnectrated zipcable, OFNP
12-Fiber 3 mm interconnect, OFNP
12-Fiber backbone, 1x12F, 3 mm interconnect Subunit, OFNP
24-Fiber backbone, 2x12F, 3 mm interconnect subunits, OFNP
24-Fiber 3.0 mm interconnectrated zipcable, OFNP
12-Fiber 3 mm interconnect, OFNP
12-Fiber backbone, 1x12F, 3 mm interconnect Subunit, OFNP
D3 24-Fiber backbone, 2x12F,
3 mm interconnect subunits, OFNP
24-Fiber backbone, 1x24F, 3.8 mm interconnect subunits, OFNP
24-Fiber 3.0 mm interconnectrated zipcable, OFNP
OM4
J4
14
D4
M4
Z4
12-Fiber 3mm interconnect, OFNP
12-Fiber backbone, 1x12F, 3 mm interconnect Subunit, OFNP
24 Fiber backbone, 2x12F, 3 mm interconnect subunits, OFNP
24 Fiber backbone, 1x24F, 3.8 mm interconnect subunits, OFNP
24-Fiber 3.0 mm interconnectrated zipcable, OFNP
Singlemode
J5
15
D5
M5
Z5
12-Fiber 3mm interconnect, OFNP
12-Fiber backbone, 1x12F, 3 mm interconnect Subunit, OFNP
24-Fiber backbone, 2x12F, 3 mm interconnect subunits, OFNP
24-Fiber backbone, 1x24F, 3.8 mm interconnect subunits, OFNP
24-Fiber 3.0 mm interconnectrated zipcable, OFNP
* Higher fiber counts available upon request
1-12 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Cable Assemblies
Cable Assembly Configuration
Figure 1
12-fiber MPO to MPO assembly on 3 mm interconnect cable or
24 Fiber MPO to MPO assembly on 3.8 mm interconnect cable
Figure 2
MPO to MPO assembly on 24 fiber 3 mm interconnect zipcord cable.
Figure 3
12-fiber MPO to MPO assembly on 12-fiber backbone cable with 1x12 fiber 3 mm interconnect subunit, or 24 fiber MPO to MPO assembly on
24 fiber backbone cable with 1x24 fiber 3.8 mm interconnect subunit.
Figure 4
MPO to MPO on backbone cable with 12-fiber 3 mm interconnect subunits. Fiber counts range from 12 to 144.
Figure 5
MPO to LC, SC, ST, FC, or MT-RJ. Fiber counts from 12 to 144 fibers.
1-13 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Cable Assemblies
Assembly Length
Measured from tip of connector A ferrule to tip of connector B ferrule. The unit of measure is dependent on the selection in position 12. Each pair of subunits beyond the first two will be 2" longer on each end of the assembly, as shown
(this allows a smaller pulling sock to be used).
Breakout Length
Choose the breakout length for each end. An entry of BF will result in 13.75" on the left and 25" on the right. The breakout length is defined from the end of the heat shrink transition to the tip of the connector ferrule as shown. The 7” section of exposed subunit shown here will exist on assemblies with any connector other than MPOs selected for connector B, and is non-configurable. Each pair of subunits beyond the first two will be 2" longer on each end of the assembly, as shown
(this allows a smaller pulling sock to be used).
1-14 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Cable Assemblies
MPO to MPO Polarity for Cable Assemblies
Description
Polarity A (Straight Through) with Standard Performance
Polarity B (Reversed) with Standard Performance
Polarity C (Pairs Flipped) with Standard Performance
Fiber Color
Red
Black
Yellow
Violet
Rose
Aqua
Yellow
Violet
Rose
Aqua
Blue
Orange
Green
Brown
Slate
White
Rose
Aqua
Blue
Orange
Green
Brown
Slate
White
Red
Black
Blue
Orange
Green
Brown
Slate
White
Red
Black
Yellow
Violet
2
3
4
5
6
9
10
11
12
1
10
11
12
7
8
9
4
5
6
7
8
11
12
1
2
3
Connector A
Fiber Number
1
2
3
4
5
6
7
8
9
10
1
4
3
6
5
4
3
2
1
2
9
12
11
8
7
10
9
8
7
6
5
11
12
12
11
10
Connector B
Fiber Number
1
2
3
4
5
6
7
8
9
10
1-15 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Cable Assemblies
Polarity for MPO to MT-RJ, LC, SC, ST, or FC
Polarity A must be chosen when connector B is a simplex connector (FC, ST, LC/APC, or SC/APC).
OPTIMATE performance can only be chosen when connector B is MPO, LC, or SC.
Description
Polarity A
(Straight
Through) with
Standard
Performance
Polarity C
(Pairs
Flipped) with
Standard
Performance
Fiber Color
Red
Black
Yellow
Violet
Rose
Aqua
Aqua
Blue
Orange
Green
Brown
Slate
White
Blue
Orange
Green
Brown
Slate
White
Red
Black
Yellow
Violet
Rose
10
11
12
7
8
9
2
3
4
12
1
5
6
Connector A
Fiber Number
1
2
5
6
7
3
4
8
9
10
11
Fiber Number
9
12
11
8
7
10
1
4
3
12
2
6
5
5
6
7
8
9
10
11
3
4
1
2
Connector B
Pair
1
2
3
4
5
6
1
2
3
4
5
6
A
B
A
B
A
B
A
B
A
B
B
B
A
Duplex
Position
A
B
A
B
A
A
B
B
A
B
A
1-16 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Cable Assemblies
ASSEMBLY PERFORMANCE
Insertion Loss
(dB Maximum)
Return Loss
(dB Minimum)
Singlemode MPO
OS2
Connector
1310 nm
1550 nm
1310 nm
1550 nm
12F MPO
0.50
0.50
55
55
24F MPO
0.75
0.75
55
55
Insertion Loss
(dB Maximum)
Return Loss
(dB Minimum)
Multimode LC, SC OPTIMATE
OM3, and OM4
Assembly Length
(meters)
850 nm
1300 nm
850 nm
1300 nm
12F MPO
0.15
0.15
35
35
Insertion Loss
(dB Maximum)
Return Loss
(dB Minimum)
Insertion Loss
(dB Maximum)
Return Loss
(dB Minimum)
Insertion Loss
(dB Maximum)
Return Loss
(dB Minimum)
Insertion Loss
(dB Maximum)
Return Loss
(dB Minimum)
Multimode 12 and 24 Fiber MPO
Assembly Length
(meters)
12F MPO
850 nm
1300 nm
850 nm
1300 nm
0.50
0.50
20
20
24F MPO
0.50
0.50
20
20
Multimode 12-fiber MPO OPTIMATE
OM3 and OM4
Assembly Length
(meters)
12F MPO 24F MPO
850 nm 0.35
0.35
28 850 nm 28
Multimode LC, SC, ST, and FC
OM1, OM2, OM3, and OM4
Assembly Length
(meters)
≤20 m
850 nm
1300 nm
850 nm
1300 nm
0.35
0.35
20
20
Singlemode
Connector
1310 nm
1550 nm
1310 nm
1550 nm
LC, SC,
ST, FC
0.30
0.30
55
55
>20 to ≤40
0.35
0.35
20
20
MT-RJ
0.50
0.50
26
26
LC APC
0.20
0.20
65
65
Insertion Loss
(dB Maximum)
Return Loss
(dB Minimum)
SC APC,
FC APC
0.30
0.30
65
65
Multimode MT-RJ
OM1, OM2, OM3, and OM4
Assembly Length
(meters)
12F MPO
850 nm
1300 nm
850 nm
1300 nm
0.50
0.50
20
20
24F MPO
0.15
0.15
35
35
24F MPO
0.50
0.50
20
20
1-17 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Cable Assemblies
Fiber Optic Patch Cords
As an integral part of the fiber product portfolio, TE Connectivity's fiber optic patch cords are essential to meet the needs of high-speed data networks. These patch cords can be used throughout the network in cross-connect, test or equipment areas to link optical equipment and are available in build to order lengths and components.
FEATURES
• Fiber connector types available in multimode and singlemode include
LC, SC, MTRJ, ST, and FC connectors featuring ceramic ferrules
• SECURE connectors available for LC and MTRJ
• Build to order configurations for any length fiber cable assembly
• Cable assemblies available in OFNP or OFNR ratings
• All patch cords are shipped with insertion loss tests for individual cords
• Factory terminated and tested
1-18 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Cable Assemblies
Fiber Patch Cord Configurator
Catalog Number
PAT- __ __ __ __ - __ __ __ __ __ __ __ __ __
Connector A Type
L LC
S
T
F
M
W
3
4
SC
ST
FC
MTRJ w/o pins*
MTRJ w/pins*
LC optimate duplex
SC optimate duplex
6
7
8
9
SC APC
LC APC
LC secure duplex
MT-RJ secure plug*
Connector A Color/Keying
C Standard
B
N
G
W
S
R
Y
V
P
A
Secure blue
Secure orange
Secure green
Secure brown
Secure slate
Secure red
Secure yellow
Secure violet
Secure rose
Secure aqua
Connector B Type
0 None/pigtails
L
S
LC
SC
T
F
M
ST
FC
W
3
4
5
6
7
MTRJ w/o pins
MTRJ w/pins
LC optimate duplex
SC optimate duplex
FC APC
SC APC
8
9
LC APC
LC secure duplex
MT-RJ secure plug
Connector B Color/Keying
C Standard
0
B
None/pigtails
Secure blue
N
G
W
S
Secure orange
Secure green
Secure brown
R
Y
V
P
A
Secure slate
Secure red
Secure yellow
Secure violet
Secure rose
Secure aqua
Polarity
BLANK
S
Standard A to B duplex
Straight A to A
Unit of Measure
F Feet
M Meters
Assembly Length
001 Shortest possible length
999 Longest possible length
Cable Type
A 1.6 mm zipcord****
B
C
D
E
F
1.8 mm zipcord*
2.0 mm zipcord
3.0 mm zipcord
900 µm buffered fiber**
2.0 mm simplex****
Cable Jacket Color***
0 Standard
Fiber Type
1 OM1
2 OM2
3
4
S
OM3
OM4
OS2
Cable Jacket Material
P Plenum
R
0
Riser
900 µm buffered fiber
1-19 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Cable Assemblies
ORDERING INFORMATION
Description Part Number
OM3 and OM4 (50/125 μm) Multimode
OM2 (50/125 μm) Multimode
OM1 (62.5/125 μm) Multimode
Singlemode
OM3 and OM4 (50/125 μm) multimode LC cable assemblies
OM3 2.0 mm zipcord LC-LC connectors
OM3 2.0 mm zipcord LC-SC connectors
OM3 2.0 mm zipcord LC-ST connectors
OM4 2.0 mm zipcord LC-LC connectors
OM3 and OM4 (50/125 μm) multimode MTRJ cable assemblies
OM3 1.8 mm zipcord LC-MTRJ connectors
OM3 1.8 mm zipcord SC-MTRJ connectors
OM3 and OM4 (50/125 μm) multimode SC cable assemblies
OM3 2.0 mm zipcord SC-SC connectors
OM4 2.0 mm zipcord SC-SC connectors
OM3 2.0 mm zipcord SC-ST connectors
OM3 and OM4 (50/125 μm) multimode ST cable assemblies
OM3 2.0 mm zipcord ST-ST connectors
OM2 (50/125 μm) multimode LC cable assemblies
OM2 2.0 mm LC-LC connectors
OM2 2.0 mm zipcord LC-SC connectors
OM2 2.0 mm zipcord LC-ST connectors
OM2 (50/125 μm) multimode MTRJ cable assemblies
OM2 1.8 mm zipcord LC-MTRJ connectors
OM2 1.8 mm zipcord SC-MTRJ connectors
OM2(50/125 μm) multimode SC cable assemblies
OM2 2.0 mm zipcord SC-SC connectors
OM2 2.0 mm zipcord SC-ST connectors
OM2 (50/125 μm) multimode ST cable assemblies
OM3 2.0 mm zipcord ST-ST connectors
OM1 (62.5/125 μm) multimode LC cable assemblies
OM1 2.0 mm zipcord LC-LC connectors
OM1 2.0 mm zipcord LC-SC connectors
OM1 2.0 mm zipcord LC-ST connectors
OM1 (62.5/125 μm) multimode MTRJ cable assemblies
OM1 1.8 mm zipcord LC-MTRJ connectors
OM2 1.8 mm zipcord SC-MTRJ connectors
OM1 (62.5/125 μm) multimode SC cable assemblies
OM1 2.0 mm zipcord SC-SC connectors
OM1 2.0 mm zipcord SC-ST connectors
OM1 (62.5/125 μm ) multimode ST cable assemblies
OM1 2.0 mm zipcord ST-ST connectors
Singlemode LC cable assemblies
OS2 2.0 mm zipcord LC-LC connectors
OS2 2.0 mm zipcord LC-SC connectors
OS2 2.0 mm zipcord LC-ST connectors
Singlemode MTRJ cable assemblies
OS2 1.8 mm zipcord LC-MTRJ connectors
OS2 1.8 mm zipcord SC-MTRJ connectors
Singlemode SC cable assemblies
OS2 2.0 mm zipcord SC-SC connectors
OS2 2.0 mm zipcord SC-ST connectors
Singlemode ST cable assemblies
OS2 2.0 mm zipcord ST-ST connectors
PAT-LCLC-P30CxxxM
PAT-LCSC-P30CxxxM
PAT-LCTC-P30CxxxM
PAT-LCLC-P40CxxxM
PAT-LCMC-P30BxxxM
PAT-SCMC-P30BxxxM
PAT-SCSC-P30CxxxM
PAT-SCSC-P40CxxxM
PAT-SCTC-P30CxxxM
PAT-TCTC-P30CxxxM
PAT-LCLC-P20CxxxM
PAT-LCSC-P20CxxxM
PAT-LCTC-P20CxxxM
PAT-LCMC-P20BxxxM
PAT-SCMC-P20BxxxM
PAT-SCSC-P20CxxxM
PAT-SCTC-P20CxxxM
PAT-TCTC-P30CxxxM
PAT-LCLC-P10CxxxM
PAT-LCSC-P10CxxxM
PAT-LCTC-P10CxxxM
PAT-LCMC-P10BxxxM
PAT-SCMC-P10BxxxM
PAT-SCSC-P10CxxxM
PAT-SCTC-P10CxxxM
PAT-TCTC-P10CxxxM
PAT-LCLC-PS0CxxxM
PAT-LCSC-PS0CxxxM
PAT-LCTC-PS0CxxxM
PAT-LCMC-PS0BxxxM
PAT-SCMC-PS0BxxxM
PAT-SCSC-PS0CxxxM
PAT-SCTC-PS0CxxxM
PAT-TCTC-PS0CxxxM xxx = length in meters or feet
1-20 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Cable Assemblies
ASSEMBLY PERFORMANCE
Insertion Loss
(dB Maximum)
Return Loss
(dB Minimum)
Insertion Loss
(dB Maximum)
Return Loss
(dB Minimum)
Multimode LC, SC, ST, and FC
(OM1, OM2, OM3, and OM4)
Assembly Length (meters) LC, SC, ST, and FC
850 nm
1300 nm
850 nm
1300 nm
0.35
20
Multimode LC, SC OPTIMATE
(OM3, and OM4)
LC, SC Optimate Assembly Length (meters)
850 nm
1300 nm
850 nm
1300 nm
0.15
35
Insertion Loss
(dB Maximum)
Return Loss
(dB Minimum)
Insertion Loss
(dB Maximum)
Return Loss
(dB Minimum)
Multimode MT-RJ
Assembly Length (meters) Multimode MT-RJ
850 nm
1300 nm
850 nm
1300 nm
0.50
20
Singlemode
Connector
1310 nm
1550 nm
1310 nm
1550 nm
LC, SC, ST, FC
0.30
0.30
55
55
MT-RJ
0.50
0.50
26
26
LC APC
0.20
0.20
65
65
SC APC, FC APC
0.30
0.30
65
65
1-21 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
Fiber Optic Cables and Field Terminated Connectors
TE Connectivity's fiber optic solutions offer a complete family of high-performance singlemode and multimode cables including indoor/outdoor cables, compact building cables, armored versions and patch cord pigtail cables. All cable is produced by highly automated manufacturing processes and each fiber is tested to specifications after cabling to ensure consistent quality and dependability.
All multimode fibers exceed IEEE 802.3z standards for Gigabit Ethernet performance.
Fiber cable solutions also support IEEE 802.3ae standards for 300 meter 10 Gbps applications as well as 550 meter 10 Gbps applications. Advanced construction techniques simplify termination and allow faster installation. Each fiber cable offers low attenuation for optimum signal reliability while offering excellent crush, cut and abrasion resistance.
TE Optical Fiber Cables are tested and designed to be the most recent applicable industry standards for premise cabling, network and telecommunications applications, including:
IEEE 802.3
10 Gigabit Ethernet
Token Ring
ICEA-640
Ethernet
FDDI
ANSI/TIA-568
ICEA-696
Telecordia GR-409-CORE Telecordia GR-20-CORE
Fast Ethernet Gigabit Ethernet
ATM Fibre Channel
ISO 11801
IEC 793-1
ICEA-596
IEC 794-1
FEATURES
• Fiber optic cables contain fibers for use in optical fiber applications including: local area networks (LANs), wide area networks (WANs), fiber to the curb (FTTC), fiber to the home (FTTH), fiber to the desk (FTTD) and others.
• TE Connectivity's optical fiber system is a high-performance cabling system designed to meet or exceed the requirements of 10 Gigabit Ethernet application.
• Optical fiber cables are tested and designed to the most recent applicable industry standards for premise cabling, network and telecommunications applications.
• TE Connectivity's LightCrimp PLUS connectors offer easy installation with no epoxy or polishing required. Simply strip, cleave and crimp.
1-22 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
Optical Fiber Interconnect Cable
• Suitable for direct termination with epoxy/polish, LightCrimp, LightCrimp
PLUS, and MT-RJ jacks for use in pigtails, and patch cords
• Simplex and zipcord cables are additionally suitable for use in internal equipment connections
• Aramid yarn reinforcement
• UL and cUL listed OFNR (riser) or OFNP (plenum)
• Hybrid cables and custom jacket colors are available
• OS2 singlemode fibers conform to
IEC 60793-2-10 B1.3 specifications for low water peak OS2 fibers
• See customer specification 114-92001 at www.te.com/EnterpriseNetworks for additional information
Figure A
Fiber
Tight
Buffering (900µm)
Aramid Strength
Members
Outer Jacket
Figure B
Figure C
DuaLAN
QuadLAN
Fiber
Tight
Buffering (900µm)
Aramid Strength
Members
Outer Jacket
Aramid Strength
Members
Outer Jacket
Fiber
Tight
Buffering (900µm)
Aramid Strength
Members
Outer Jacket
Figure D
Fiber
Tight
Buffering (900µm)
Aramid Strength
Members
Outer Jacket
OM3 and OM4 (50/125 µm) Multimode
Optical Fiber Interconnect Cable
• Outer jacket color: aqua
• All fiber is bend-insensitive
ORDERING INFORMATION
Cable Type
Simplex (2.0 mm)
Simplex (2.9 mm)
Zipcord (2.0 mm)
Zipcord (2.9 mm)
Dual (2.9 mm)
Dual (4.8 mm)
Quad (4.8 mm)
Fiber
Count
1
1
2
2
4
2
2
Unit Count
Units (Fibers/Unit) Figure
1 (1)
1 (1)
2 (1)
A
2 (1)
1 (2)
1 (2)
1 (4)
B
C
D
OM3
Riser (OFNR)
3-1553406-9
3-1553408-9
3-1553410-9
3-1553412-9
3-1553414-9
3-1553416-9
3-1553418-9
Part Number
OM3
Plenum (OFNP)
OM4
Riser (OFNR)
3-1553407-9
3-1553409-9
3-1553411-9
4-1553406-9
4-1553408-9
4-1553410-9
3-1553413-9
3-1553415-9
3-1553417-9
3-1553419-9
4-1553412-9
4-1553414-9
4-1553416-9
4-1553418-9
OM4
Plenum (OFNP)
4-1553407-9
4-1553409-9
4-1553411-9
4-1553413-9
4-1553415-9
4-1553417-9
4-1553419-9
1-23 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Zipcord
Fiber Optic Cables and Field Terminated Connectors
50/125 µm OM2 Multimode Optical Fiber Interconnect Cable
Simplex
• All fiber is bend-insensitive
Fiber
Tight
Buffering (900µm)
Aramid Strength
Members
Outer Jacket
Fiber
Tight
Buffering (900µm)
Aramid Strength
Members
Outer Jacket
Fiber
Tight
Buffering (900m)
Aramid Strength
Members
Outer Jacket
Figure A Figure B Figure C
ORDERING INFORMATION
Cable Type
Simplex (2.0 mm)
Simplex (2.9 mm)
Zipcord (2.0 mm)
Zipcord (2.9 mm)
Dual (2.9 mm)
Dual (4.8 mm)
Quad (4.8 mm)
Fiber Count Unit Count Units (Fibers/Unit)
1
1
1 (1)
1 (1)
2
2
2
2
4
2 (1)
2 (1)
1 (2)
1 (2)
Figure
A
B
C
Zipcord
1 (4) D
Part Number
Riser (OFNR) Plenum (OFNP)
1-1553406-2
1-1553408-2
1-1553407-2
1-1553409-2
1-1553410-2
1-1553412-2
1-1553414-2
1-1553416-2
1-1553418-2
1-1553411-2
1-1553413-2
1-1553415-2
1-1553417-2
1-1553419-2
Fiber
Buffering (900µm)
Buffering (900m)
Aramid Strength
Members
Figure D Fiber
Tight
Buffering (900µm)
Aramid Strength
Members
Outer Jacket
62.5/125 µm OM1 Multimode Optical Fiber Interconnect Cable
Simplex
Fiber
Tight
Buffering (900µm)
Aramid Strength
Members
Outer Jacket
Figure A
ORDERING INFORMATION
Cable Type
Simplex (2.0 mm)
Simplex (2.9 mm)
Zipcord (2.0 mm)
Zipcord (2.9 mm)
Dual (2.9 mm)
Dual (4.8 mm)
Quad (4.8 mm)
Figure B
Fiber
Tight
Buffering (900µm)
Aramid Strength
Members
Outer Jacket
Figure C
Fiber
Tight
Buffering (900m)
Aramid Strength
Members
Outer Jacket
Fiber Count Unit Count Units (Fibers/Unit)
1 1 (1)
1
2
1 (1)
2 (1)
2
2
2
4
2 (1)
1 (2)
1 (2)
1 (4)
Figure
A
B
C
D
Part Number
Riser (OFNR) Plenum (OFNP)
1-1553406-1 1-1553407-1
1-1553408-1
1-1553410-1
1-1553412-1
1-1553414-1
1-1553416-1
1-1553418-1
1-1553409-1
1-1553411-1
1-1553413-1
1-1553415-1
1-1553417-1
1-1553419-1
Fiber
Tight
Aramid Strength
Members
Figure D
Fiber
Tight
Buffering (900µm)
Aramid Strength
Members
Outer Jacket
1-24 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Zipcord
OS2 Singlemode Optical Fiber Interconnect Cable
Simplex
• All fiber is bend-insenstive ITU-T G657.A2
Fiber
Tight
Buffering (900µm)
Aramid Strength
Members
Outer Jacket
Figure A Figure B
Fiber
Tight
Buffering (900m)
Aramid Strength
Members
Fiber
Outer Jacket
Tight
Buffering (900µm)
Aramid Strength
Members
Outer Jacket
DuaLAN
Fiber
Tight
Buffering (900m)
Aramid Strength
Members
QuadLAN
Outer Jacket
Fiber
Tight
Buffering (900µm)
Aramid Strength
Members
Outer Jacket
Figure C
Fiber
Aramid Strength
Members
Outer Jacket
Figure D
ORDERING INFORMATION
Cable Type/Jacket Diameter
Simplex (2.0 mm)
Simplex (2.9 mm)
Zipcord (2.0 mm)
Zipcord (2.9 mm)
Dual (2.9 mm)
Dual (4.8 mm)
Quad (4.8 mm)
Fiber Count
1
1
2
2
4
2
2
Unit Count Units (Fibers/Unit)
1 (1)
1 (1)
2 (1)
2 (1)
1 (2)
1 (2)
1 (4)
Figure
A
B
C
D
Riser (OFNR) Plenum (OFNP)
7-1553406-3 7-1553407-3
7-1553408-3
7-1553410-3
7-1553412-3
7-1553414-3
7-1553416-3
7-1553418-3
7-1553409-3
7-1553411-3
7-1553413-3
7-1553415-3
7-1553417-3
7-1553419-3
1-25 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
Horizontal Distribution
Optical Fiber Distribution Cable
• Suitable for horizontal and in-building backbone cabling and for direct termination with epoxy/polish,
LightCrimp, LightCrimp PLUS and MT-RJ jacks
• Strippable 900 µm tight buffer coating allows for easy connectorization
• TIA color-coded fibers for easy identification
• UL and cUL listed OFNR (riser) or OFNP (plenum)
• Hybrid cables and other jacket colors are available
• OS2 singlemode fibers conform to IEC 60793-2-
10B1.3 specifications for low water peak OS1 fibers
• See customer specification 114-92000 at: www.te.com/EnterpriseNetworks for additional information
Figure A
Figure B
Figure C
Fibers
Tight Buffering (900µm)
Strength Members
Outer Jacket
Dielectric Central
Strength Member
Fibers
Tight Buffering (900µm)
Strength Members
Protective Jacket
Binder
Outer Jacket
72-Fiber Cable Cross Section
OM3 and OM4 (50/125 m) Multimode Optical Fiber Distribution Cable
• Outer jacket color: aqua
• All fiber is bend-insensitive
ORDERING INFORMATION
36
48
72
96
144
Fiber Count
6
8
12
24
Unit Count
Unit (Fibers/Unit)
1 (6)
1 (8)
1 (12)
1 (24)
2 (12)
4 (6)
6 (6)
4 (12)
6 (12)
8 (12)
12 (12)
Figure
A
B
C
OM3
Riser (OFNR)
3-1553307-9
3-1553309-9
3-1553311-9
3-1553313-9
3-1553315-9
3-1553317-9
3-1553319-9
3-1553321-9
3-1553323-9
3-1553325-9
3-1553327-9
OM3
Plenum (OFNP)
3-1553308-9
Part Number
OM4
Riser (OFNR)
4-1553307-9
3-1553310-9
3-1553312-9
3-1553314-9
3-1553316-9
3-1553318-9
4-1553309-9
4-1553311-9
4-1553313-9
4-1553315-9
4-1553317-9
3-1553320-9
3-1553322-9
3-1553324-9
3-1553326-9
4-1553319-9
4-1553321-9
4-1553323-9
4-1553325-9
3-1553328-9 4-1553327-9
OM4
Plenum (OFNP)
4-1553308-9
4-1553310-9
4-1553312-9
4-1553314-9
4-1553316-9
4-1553318-9
4-1553320-9
4-1553322-9
4-1553324-9
4-1553326-9
4-1553328-9
1-26 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
50/125 µm OM2 Multimode Optical Fiber Interconnect Cable
• Outer jacket color: orange
• All fiber is bend-insensitive
Figure A
36
48
72
96
144
ORDERING INFORMATION
Fiber Count
6
8
12
24
Unit Count Unit
(Fibers/Unit)
1 (6)
1 (8)
1 (12)
1 (24)
2 (12)
4 (6)
6 (6)
4 (12)
6 (12)
8 (12)
12 (12)
Figure
A
B
C
Figure B
Riser (OFNR)
1-1553307-2
1-1553309-2
1-1553311-2
1-1553313-2
1-1553315-2
1-1553317-2
1-1553319-2
1-1553321-2
1-1553323-2
1-1553325-2
1-1553327-2
Part Number
Plenum (OFNP)
1-1553308-2
1-1553310-2
1-1553312-2
1-1553314-2
1-1553316-2
1-1553318-2
1-1553320-2
1-1553322-2
1-1553324-2
1-1553326-2
1-1553328-2
Horizontal Distribution
Figure C
Fibers
Tight Buffering (900µm)
Strength Members
Outer Jacket
Dielectric Central
Strength Member
Fibers
Tight Buffering (900µm)
Strength Members
Protective Jacket
Binder
Outer Jacket
72-Fiber Cable Cross Section
62.5/125 µm OM1 Multimode Optical Fiber Interconnect Cable
• Outer jacket color: orange
Horizontal Distribution
ORDERING INFORMATION
36
48
72
96
144
6
8
Fiber
Count
12
24
Unit Count Unit
(Fibers/Unit)
1 (6)
1 (8)
1 (12)
1 (24)
2 (12)
4 (6)
6 (6)
4 (12)
6 (12)
8 (12)
12 (12)
Figure
A
B
C
Riser
(OFNR)
1-1553307-1
Part Number
Plenum
(OFNP)
1-1553308-1
1-1553309-1
1-1553311-1
1-1553313-1
1-1553315-1
1-1553317-1
1-1553310-1
1-1553312-1
1-1553314-1
1-1553316-1
1-1553318-1
1-1553319-1
1-1553321-1
1-1553323-1
1-1553325-1
1-1553320-1
1-1553322-1
1-1553324-1
1-1553326-1
1-1553327-1 1-1553328-1
Figure A
Figure B
Figure C
Fibers
Tight Buffering (900µm)
Strength Members
Outer Jacket
Dielectric Central
Strength Member
Fibers
Tight Buffering (900µm)
Strength Members
Protective Jacket
Binder
Outer Jacket
72-Fiber Cable Cross Section
1-27 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
OS2 Singlemode Optical Fiber Interconnect Cable
• Outer jacket color: yellow
• All fiber is bend insensitive ITU-T G.657.A2
ORDERING INFORMATION
36
48
72
96
144
Fiber Count
6
8
12
24
Unit Count Unit (Fibers/Unit)
1 (6)
1 (8)
1 (12)
1 (24)
2 (12)
4 (6)
6 (6)
4 (12)
6 (12)
8 (12)
12 (12)
Figure
A
B
C
Riser (OFNR)
7-1553307-3
7-1553309-3
7-1553311-3
7-1553313-3
7-1553315-3
7-1553317-3
7-1553319-3
7-1553321-3
7-1553323-3
7-1553325-3
7-1553327-3
Plenum (OFNP)
7-1553308-3
7-1553310-3
7-1553312-3
7-1553314-3
7-1553316-3
7-1553318-3
7-1553320-3
7-1553322-3
7-1553324-3
7-1553326-3
7-1553328-3
Figure A
Figure B
Fibers
Tight Buffering (900µm)
Strength Members
Outer Jacket
Dielectric Central
Strength Member
Fibers
Tight Buffering (900µm)
Strength Members
Protective Jacket
Binder
Outer Jacket
72-Fiber Cable Cross Section
1-28 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
Interlocking Armor Optical Fiber Distribution Cable
• Robust construction provides extra protection for optical fibers
• Interlocking armor enhances flexibility
• Lightweight aluminum armor simplifies handling
• Installer-friendly plenum rated over-jacketing makes cable pulls easier
• Outer/over jacketing color: aqua (OM3 and OM4); orange (OM2 and OM1); yellow (singlemode)
• Hybrid cables and other jacket colors are available
• Pending local codes, may eliminate the need for innerduct
• OFCP (plenum) rated
• TIA color-coded fibers
• Strippable 900 µm tight buffer coating allows for easy connectorization
• Indoor/Outdoor and specialty versions available
48
72
ORDERING INFORMATION
Fiber
Count
6
12
24
Unit Count Units
(Fibers/Unit)
1 (6)
1 (12)
1 (24)
2(12)
4 (12)
6 (12)
UL/NEC
Ratings
Plenum (OFCP)
Plenum (OFCP)
Plenum (OFCP)
Plenum (OFCP)
Plenum (OFCP)
Plenum (OFCP)
OM4
(50/125 µm)
(aqua)
7-1777121-7
7-1777117-7
4-1553420-9
7-1777122-7
7-1777123-7
7-1777124-7
OM3
(50/125 µm)
(aqua)
3-1777121-7
3-1777117-7
3-1553420-9
3-1777122-7
3-1777123-7
3-1777124-7
OM2
(50/125 µm)
(orange)
2-1777121-7
2-1777117-7
1-1553420-2
2-1777122-7
2-1777123-7
2-1777124-7
OM1
(62.5/125 µm)
(orange)
1-1777121-7
1-1777117-7
1-1553420-1
1-1777122-7
1-1777123-7
1-1777124-7
OS1
Singlemode
(yellow)
4-1777121-7
4-1777117-7
7-1553420-3
4-1777122-7
4-1777123-7
4-1777124-7
1-29 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
Optical Fiber Indoor/Outdoor Cable
• Suitable for building and inter-building backbone cabling
• Can eliminate the need for a transition point and splicing when entering buildings – go directly from outdoors into building riser or plenum spaces
Figure A
• Water-blocked buffer tube for water penetration protection
• Flame-retardant UV-protected jacket for harsh outdoor environments
• All-dielectric construction
• UL and cUL listed OFNR (riser) or OFNP (plenum)
• Outer jacket color is black for all fiber types
• Single loose tube cables:
Figure B
Indoor/Outdoor CLT
Figure C
(CampusLink)
– TIA color-coded fibers for easy identification
– Water-blocked buffer tube for water penetration protection
– Small diameter single tube construction saves space inside ducts
• Stranded loose tube cables:
Fibers
Water-blocked Buffer Tube
Strength Members
– Hybrid cables and other jacket colors are available
– Reverse oscillating lay construction for easy midspan access
– Dry water blocking technology
– TIA color-coded fibers in TIA color-coded tubes for easy identification
• See customer specification 114-92002 at: www.te.com/EnterpriseNetworks for additional information
Outer Jacket
Indoor/Outdoor SLT
Dielectric Central
Strength Member
Water-Blocked Buffer Tube
Fibers
Flame Barrier Tapes
Water-Blocking Outer
Strength Members
Outer Jacket
144-Fiber Cable Cross Section
OM3 and OM4 (50/125 µm) Optical Fiber Indoor/Outdoor Cable
ORDERING INFORMATION
Cable Type
Single Loose Tube
Stranded Loose Tube
Fiber
Count
6
8
12
24
36
48
72
96
144
Unit Count
Unit (Fibers/Unit)
1 (6)
1 (8)
1 (12)
2 (12)
3 (12)
4 (12)
6 (12)
8 (12)
12 (12)
Figure
A
B
C
OM3
(50/125 µm)
Riser (OFNR)
6-1553342-4
6-1553344-4
6-1553346-4
6-1553348-4
6-1553350-4
6-1553352-4
6-1553354-4
6-1553356-4
6-1553358-4
Part Number
OM3
(50/125 µm)
Plenum (OFNP)
OM4
(50/125 µm)
Riser (OFNR)
6-1553343-4
6-1553345-4
6-1553347-4
6-1553349-4
6-1553342-5
6-1553344-5
6-1553346-5
6-1553348-5
6-1553351-4
6-1553353-4
6-1553355-4
6-1553357-4
6-1553359-4
6-1553350-5
6-1553352-5
6-1553354-5
6-1553356-5
6-1553358-5
OM4
(50/125 µm)
Plenum (OFNP)
6-1553343-5
6-1553345-5
6-1553347-5
6-1553349-5
6-1553351-5
6-1553353-5
6-1553355-5
6-1553357-5
6-1553359-5
1-30 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
OM2, OM1 and Singlemode Optical Fiber Indoor/Outdoor Cable
ORDERING INFORMATION
Cable
Type
Single
Loose
Tube
Fiber
Count
6
8
Standard
Loose
Tubet
12
24
36
48
72
96
144
Unit Count
Units
(Fibers/Unit) Figure
1 (6) A
1 (8)
OM2
(50/125m)
Riser (OFNR)
OM2
(50/125m)
Plenum
(OFNP)
6-1553342-2 6-1553343-2
6-1553344-2 6-1553345-2
1 (12)
2 (12)
3 (12)
4 (12)
6 (12)
8 (12)
12 (12)
B
C
6-1553346-2 6-1553347-2
6-1553348-2 6-1553349-2
6-1553350-2 6-1553351-2
6-1553352-2 6-1553353-2
6-1553354-2 6-1553355-2
6-1553356-2 6-1553357-2
6-1553358-2 6-1553359-2
OM1
(62.5/125m)
Riser (OFNR)
6-1553342-1
6-1553344-1
6-1553346-1
6-1553348-1
6-1553350-1
6-1553352-1
6-1553354-1
6-1553356-1
6-1553358-1
OM1
(62.5/125m)
Plenum
(OFNP)
6-1553343-1
6-1553345-1
6-1553347-1
6-1553349-1
6-1553351-1
6-1553353-1
6-1553355-1
6-1553357-1
6-1553359-1
OS2
Singlemode
Riser (OFNR)
6-1553342-3
6-1553344-3
6-1553346-3
6-1553348-3
6-1553350-3
6-1553352-3
6-1553354-3
6-1553356-3
6-1553358-3
OS2
Singlemode
Plenum (OFNP)
6-1553343-3
6-1553345-3
6-1553347-3
6-1553349-3
6-1553351-3
6-1553353-3
6-1553355-3
6-1553357-3
6-1553359-3
1-31 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
Optical Fiber Outside Plant (OSP) Cable
Indoor/Outdoor CLT
• Suitable for inter-building backbone cabling (aerial, duct or direct burial)
Figure A
(CampusLink)
• Dry water-blocking technology
• UV-protected jacket for harsh outdoor environment
• Low friction jacket for ease of pulling through ducts
• All-dielectric construction
• Outer jacket color is black
• See customer specification 114-92003 at: www.te.com/EnterpriseNetworks for additional information
• Single loose tube cables:
– TIA color-coded fibers for easy identification
– Small diameter single tube construction saves space inside ducts
• Stranded loose tube cables:
– Reverse oscillating lay construction for easy midspan access
– TIA color-coded fibers and buffer tubes for easy identification
Fibers
Water-blocked Buffer Tube
Strength Members
Outer Jacket
Dielectric SLT
12-Fiber Cable Cross Section
Dielectric Central
Strength Member
Water-Blocking Materials
Buffer Tubes
Fibers
Water-Blocking Outer
Strength Members
Outer Jacket
144-Fiber Cable Cross Section
ORDERING INFORMATION
Fiber Count Unit Count Units (Fibers/Unit)
4
6
8
12
24
1 (4)
1 (6)
1 (8)
1 (12)
2 (12)
36
48
72
96
144
3 (12)
4 (12)
6 (12)
8 (12)
12 (12)
Figure
A
OM4
(50/125 µm)
6-1553386-5
6-1553387-5
6-1553388-5
6-1553389-5
6-1553390-5
6-1553391-5
6-1553392-5
6-1553393-5
6-1553394-5
6-1553395-5
OM3
(50/125 µm)
6-1553386-4
6-1553387-4
6-1553388-4
6-1553389-4
6-1553390-4
6-1553391-4
6-1553392-4
6-1553393-4
6-1553394-4
6-1553395-4
OM2
(50/125 µm)
6-1553386-2
6-1553387-2
6-1553388-2
6-1553389-2
6-1553390-2
6-1553391-2
6-1553392-2
6-1553393-2
6-1553394-2
6-1553395-2
OM1
(62.5/125 µm)
6-1553386-1
6-1553387-1
6-1553388-1
6-1553389-1
6-1553390-1
6-1553391-1
6-1553392-1
6-1553393-1
6-1553394-1
6-1553395-1
OS2
Singlemode
6-1553386-3
6-1553387-3
6-1553388-3
6-1553389-3
6-1553390-3
6-1553391-3
6-1553392-3
6-1553393-3
6-1553394-3
6-1553395-3
1-32 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
Multimode Optical Fiber Outside Plant Armored (OSPA) Cable
• Suitable for inter-building backbone cabling (aerial, duct or direct buried)
• Dry water-blocking technology
• UV-protected jacket for harsh outdoor environment
• Low friction jacket for ease of pulling through ducts
Figure A
• Corrugated steel tape armor for rugged environments and rodent protection
• Outer jacket color is black for all fiber types
• See customer specification 114-92003 at: www.te.com/EnterpriseNetworks for additional information
Armored CLT
• Single loose tube cables:
– TIA color-coded fibers for easy identification
– Small diameter single tube construction saves space inside ducts
• Stranded loose tube cables:
Figure B
Fibers
Armored SLT
Water-blocked Buffer Tube
Water-Blocking Outer
Strength Member s
Strength
(Single Armor/Single Jacket)
Outer Jacket
12-Fiber Cable Cross Section
– TIA color-coded fibers and buffer tubes for easy identification
Dielectric Central
Strength Member – Reverse oscillating lay construction for easy midspan access
– Hybrid cables (with singlemode and multimode fibers) are available to provide a built-in migration path for future applications that will require singlemode fibers
Water-Blocking Materials
Water-blocked Buffer Tubes
Fibers
Outer Strength Members
Corrugated Armor
Outer Jacket
144-Fiber Cable Cross Section
ORDERING INFORMATION
Cable Type
Fiber
Count
Unit Count Units
(Fibers/Unit)
Single
Loose Tube
Stranded
Loose Tube
72
96
144
4
6
8
12
24
36
48
1 (4)
1 (6)
1 (8)
1 (12)
2 (12)
3 (12)
4 (12)
6 (12)
8 (12)
12 (12)
Figure
A
B
OM4
(50/125 µm)
6-1553396-5
6-1553397-5
6-1553398-5
6-1553399-5
6-1553400-5
6-1553401-5
6-1553402-5
6-1553403-5
6-1553404-5
6-1553405-5
OM3
(50/125 µm)
6-1553396-4
6-1553397-4
6-1553398-4
6-1553399-4
6-1553400-4
6-1553401-4
6-1553402-4
6-1553403-4
6-1553404-4
6-1553405-4
OM2
(50/125 µm)
6-1553396-2
6-1553397-2
6-1553398-2
6-1553399-2
6-1553400-2
6-1553401-2
6-1553402-2
6-1553403-2
6-1553404-2
6-1553405-2
OM1
(62.5/125 µm)
6-1553396-1
6-1553397-1
6-1553398-1
6-1553399-1
6-1553400-1
6-1553401-1
6-1553402-1
6-1553403-1
6-1553404-1
6-1553405-1
OS2
Singlemode
6-1553396-3
6-1553397-3
6-1553398-3
6-1553399-3
6-1553400-3
6-1553401-3
6-1553402-3
6-1553403-3
6-1553404-3
6-1553405-3
1-33 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
Multimode Optical Fiber Performance
Fiber Type
OM4
(850 nm LO 50 µm)
Multimode
OM3
(850 nm LO 50 µm)
Multimode
OM2 (50/125 µm)
Multimode
OM1 (62.5/125 µm)
Multimode
Singlemode
Gigabit Ethernet
@ 850 nm
>800 m
800 m
550 m
300 m
–
Gigabit Ethernet
@ 1300 nm
Gigabit Ethernet
@ 1310 nm
10 Gigabit Ethernet
@ 850 nm
550 m
550 m
550 m
550 m
–
–
–
–
–
5000 m
550 m
300 m
82 m
33 m
–
10 Gigabit Ethernet
@ 1300 nm
10 Gigabit Ethernet
@1310 nm
300 m
300 m
300 m
300 m
–
–
–
–
–
10000 m
Multimode (850/1300 nm) and Singlemode (1310/1550 nm)
Optical Fiber Cable Performance Specifications
Cable Type
OM3 and OM4 indoor,
Indoor/Outdoor, and OSP
Loose Tube Cables
OM2 (50/125 µm) Indoor, Indoor/
Outdoor and OSP Loose Tube
Cables
OM1 (62.5/125 µm) Indoor,
Indoor/Outdoor and OSP Loose
Tube Cables
Singlemode Indoor and Indoor/
Outdoor Cables
Singlemode OSP Loose Tube
Cables
Fiber Type
OM3 Multimode 3.0
Maximum
Attenuation dB/km
850 nm 1300 nm 1310 nm 1550 nm 850 nm
1.0
–
Maximum
Attenuation dB/km
–
OFL Bandwidth
MHz-km
1500
1300 nm 850 nm
500
Laser Bandwidth
2000
MHz-km
1300 nm
–
OM4 Multimode 3.0
1.0
– – 3500 500 4700 –
OM2 Multimode 3.5
OM1 Multimode
SM OS2 BIF
SM OS2 BIF
3.5
–
–
1.5
1.2
–
–
–
–
0.4
0.35
–
–
0.3
0.25
500
200
–
–
500
500
–
–
–
–
–
–
–
–
–
–
1-34 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
Optical Fiber Cable Temperature Ranges
Cable Type
Interconnect (Tight Buffered) Cables
Indoor, Distribution (Tight Buffered) Cables
Indoor/Outdoor Cables
Condition
Storage
Operating
Installation
Storage
Operating
Installation
Storage
Operating
Installation
Riser
-40° C to +65° C (-40° F to +149° F)
-20° C to +50° C (-4° F to +122° F)
-20° C to +50° C (-4° F to +122° F)
-40° C to +70° C (-40° F to +158° F)
-20° C to +70° C (-4° F to +158° F)
-10° C to +60° C (14° F to +140° F)
-40° C to +70° C (-40° F to +160° F)
-40° C to +70° C (-40° F to +160° F)
-20° C to +60° C (-4° F to +140° F)
Plenum
-40° C to +65° C (-40° F to +149° F)
-20° C to +50° C (-4° F to +122° F)
-20° C to +50° C (-4° F to +122° F)
-40° C to +70° C (-40° F to +158° F)
0° C to +70° C (32° F to +158° F)
0° C to +60° C (32° F to +140° F)
-40° C to +70° C (-40° F to +160° F)
-40° C to +70° C (-40° F to +160° F)
0° C to +60° C (32° F to +140° F)
Stranded Cables
OSP (Loose Tube) Cables
Storage
Operating
Installation
-40° C to +70° C (-40° F to +158° F)
-40° C to +70° C (-40° F to +158° F)
-30° C to +60° C (-22° F to +140° F)
–
–
–
Optical Fiber Cable Technical Information
Cable Type
Outside Plant,
Single Loose Tube
Outside Plant,
Stranded Loose
Tube
Outside Plant,
Armored Single
Loose Tube
Outside Plant,
Armored Stranded
Loose Tube
72
96
144
8
12
24
36
48
72
96
144
4
6
Fiber
Count
4
6
8
12
24
36
48
6 (12)
8 (12)
12 (12)
1 (4)
1 (6)
1 (8)
1 (12)
2 (12)
3 (12)
4 (12)
6 (12)
8 (12)
12 (12)
Unit Count
Units
(Fibers/Unit)
1 (4)
1 (6)
1 (8)
1 (12)
2 (12)
3 (12)
4 (12)
Diameter mm (in)
8.3 (0.33)
8.3 (0.33)
8.3 (0.33)
8.3 (0.33)
11.0 (0.43)
11.0 (0.43)
11.0 (0.43)
11.9 (0.47)
13.6 (0.53)
17.6 (0.69)
10.9 (0.43)
10.9 (0.43)
10.9 (0.43)
10.9 (0.43)
13.8 (0.55)
13.8 (0.55)
13.8 (0.55)
14.8 (0.58)
16.7 (0.69)
21.4 (0.84)
130 (87)
158 (106)
252 (169)
140 (94)
140 (94)
140 (94)
140 (94)
214 (144)
218 (146)
223 (150)
265 (178)
307 (206)
498 (335)
Weight kg/km
(lb/kft)
50 (34)
50 (34)
50 (34)
50 (34)
100 (67)
93 (62)
97 (65)
Tensile Load N (lbf)
Installation
2670 (600)
2670 (600)
2670 (600)
2670 (600)
2670 (600)
2670 (600)
2670 (600)
2670 (600)
2670 (600)
2670 (600)
2670 (600)
2670 (600)
2670 (600)
2670 (600)
2670 (600)
2670 (600)
2670 (600)
2670 (600)
2670 (600)
2670 (600)
Long Term
890 (200)
890 (200)
890 (200)
890 (200)
890 (200)
890 (200)
890 (200)
890 (200)
890 (200)
890 (200)
890 (200)
890 (200)
890 (200)
890 (200)
890 (200)
890 (200)
890 (200)
890 (200)
890 (200)
890 (200)
Bending Radius mm (in)
Installation
176 (6.9)
176 (6.9)
176 (6.9)
176 (6.9)
242 (9.5)
242 (9.5)
242 (9.5)
252 (9.9)
287 (11.3)
364 (14.3)
244 (9.6)
244 (9.6)
244 (9.6)
244 (9.6)
315 (12.4)
315 (12.4)
315 (12.4)
335 (13.2)
378 (14.9)
455 (17.9)
126 (5.0)
144 (5.6)
182 (7.2)
122 (4.8)
122 (4.8)
122 (4.8)
122 (4.8)
158 (6.2)
158 (6.2)
158 (6.2)
167 (6.6)
189 (7.4)
228 (9)
Long Term
88 (3.5)
88 (3.5)
88 (3.5)
88 (3.5)
121 (4.8)
121 (4.8)
121 (4.8)
1-35 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
Optical Fiber Cable Technical Information (Continued)
Cable Type
Fiber
Count
Unit Count
Units
(Fibers/Unit)
Interconnect,
Simplex
Interconnect,
Zipcord
Interconnect,
Dual
Interconnect,
Quad
Distribution
1
2
2
4
6
8
12
24
24
24
36
48
72
96
144
1 (1)
2 (1)
1 (2)
1 (4)
1 (6)
1 (8)
1 (12)
1 (24)
2 (12)
4 (6)
6 (6)
4 (12)
6 (12)
8 (12)
12 (12)
OFNP
OFNR
OFNP
OFNR
OFNP
OFNR
OFNP
OFNR
OFNP
OFNR
OFNP
OFNR
OFNP
OFNR
OFNP
OFNR
OFNP
OFNP
OFNR
OFNP
OFNR
OFNP
OFNR
OFNP
OFNR
OFNP
OFNR
UL/NEC
Ratings
OFNR
OFNP
OFNR
OFNP
OFNR
OFNP
OFNR
OFNP
OFNR
Tensile Load N (lbf) Bending Radius mm (in)
2.9 (0.11)
4.8 (0.3)
4.8 (0.3)
4.8 (0.3)
4.8 (0.3)
5.2 (0.20)
4.8 (0.19)
5.7 (0.22)
5.0 (0.20)
6.0 (0.24)
Diameter mm (in)
2.0 (0.08)
2.0 (0.08)
2.9 (0.11)
2.9 (0.11)
2.0 (0.08) x 4.1 (0.16)
2.0 (0.08) x 4.1 (0.16)
2.9 (0.11) x 5.9 (0.23)
2.9 (0.11) x 5.9 (0.23)
2.9 (0.11)
5.7 (0.23)
8.0 (0.31)
7.7 (0.30)
46 (31)
61 (41)
69 (46)
7.4 x 13.0 (0.29 x 0.51) 87 (58)
7.0 x 12.4 (0.28 x 0.49) 92 (62)
13.4 (0.53)
13.3 (0.52)
16.4 (0.65)
16.0 (0.63)
16.0 (0.63)
180 (121)
200 (134)
220 (148)
255 (171)
250 (168)
15.2 (0.60)
18.9 (0.75)
18.5 (0.73)
22.8 (0.90)
22.0 (0.86)
24.8 (0.98)
24.2 (0.95)
202 (136)
301 (202)
316 (212)
433 (291)
466 (313)
461 (310)
474 (319)
9 (6)
20 (13)
30 (20)
25 (17)
30 (20)
29 (19)
24 (16)
24 (16)
26 (17)
37 (25)
Weight kg/km
(lb/kft)
5 (3)
6 (4)
8 (5)
9 (6)
8 (5)
10 (7)
15 (10)
15 (10)
7 (5)
Installation Long Term Installation Long Term
40 (9)
40 (9)
12 (3)
12 (3)
50 (1.97)
50 (1.97)
25 (0.98)
25 (0.98)
100 (22)
100 (22)
30 (7)
30 (7)
40 (9)
40 (9)
12 (3)
12 (3)
100 (22) 30 (7)
100 (22)
100 (22)
30 (7)
30 (7)
58 (2.3)
58 (2.3)
50 (1.97)
50 (1.97)
58 (2.3)
58 (2.3)
57 (2.2)
29 (1.1)
29 (1.1)
25 (0.98)
25 (0.98)
29 (1.1)
29 (1.1)
29 (1.1)
100 (22)
100 (22)
100 (22)
100 (22)
100 (22)
30 (7)
30 (7)
30 (7)
30 (7)
30 (7)
660 (150) 198 (45)
440 (100) 132 (30)
660 (150) 198 (45)
440 (100) 132 (30)
660 (150) 198 (45)
57 (2.2)
96 (3.8)
96 (3.8)
96 (3.8)
96 (3.8)
114 (4.5)
110 (4.3)
136 (5.4)
110 (4.3)
128 (5)
29 (1.1)
48 (1.9)
48 (1.9)
48 (1.9)
48 (1.9)
57 (2.2)
55 (2.2)
68 (2.7)
55 (2.2)
64 (2.5)
440 (100) 132 (30)
1320 (300) 396 (90)
660 (150) 198 (45)
1320 (300) 396 (90)
660 (150) 198 (45)
1320 (300) 396 (90)
660 (150) 198 (45)
1320 (300) 396 (90)
660 (150) 198 (45)
1320 (300) 396 (90)
660 (150) 198 (45)
1320 (300) 396 (90)
660 (150) 198 (45)
1320 (300) 396 (90)
660 (150) 198 (45)
1320 (300) 396 (90)
660 (150) 198 (45)
128 (5)
178 (7)
168 (6.6)
284 (11.2) 142 (5.6)
264 (10.4) 132 (5.2)
275 (10.8)
266 (10.5)
342 (13.5)
327 (12.9)
350 (13.8)
312 (12.3)
386 (15.2)
386 (15.2)
462 (18.2)
448 (17.6)
514 (20.2)
514 (20.2)
64 (2.5)
89 (3.5)
84 (3.3)
137 (5.4)
133 (5.2)
171 (6.7)
164 (6.4)
175 (6.9)
156 (6.1)
193 (7.6)
193 (7.6)
231 (9.1)
224 (8.8)
257 (10.1)
257 (10.1)
1-36 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
Optical Fiber Cable Technical Information (Continued)
Cable Type
Distribution,
Interlocking
Armor
Fiber
Count
6
12
24
24
48
72
6
Indoor/
Outdoor,
Single Loose
Tube
8
12
Unit Count
Units
(Fibers/Unit)
1 (6)
1 (12)
1 (24)
2(12)
4 (12)
6 (12)
1 (6)
1 (8)
1 (12)
Indoor/
Outdoor,
Stranded
Loose Tube
24
36
48
72
96
144
2 (12)
3 (12)
4 (12)
6 (12)
8 (12)
12 (12)
6.6 (0.26)
6.5 (0.26)
6.6 (0.26)
10.1 (0.40)
9.7 (0.38)
10.1 (0.40)
9.7 (0.38)
10.1 (0.40)
9.7 (0.38)
11.9 (0.47)
Diameter mm (in)
13.1 (0.52)
13.3 (0.52)
14.8 (0.58)
18.9 (0.74)
23.4 (0.92)
24.7 (0.97)
6.5 (0.26)
6.6 (0.26)
6.5 (0.26)
11.7 (0.46)
13.7 (0.54)
13.5 (0.53)
17.8 (0.70)
17.7 (0.70)
OFNP
OFNR
OFNP
OFNR
OFNP
OFNR
OFNP
OFNR
OFNP
OFNR
UL/NEC
Ratings
OFCP
OFCP
OFCP
OFCP
OFCP
OFCP
OFNR
OFNP
OFNR
OFNP
OFNR
OFNP
OFNR
OFNP
46 (31)
45 (30)
46 (31)
84 (56)
86 (58)
84 (56)
86 (58)
84 (56)
86 (58)
111 (75)
Weight kg/km
(lb/kft)
117 (79)
129 (87)
176 (119)
240 (161)
408 (274)
537 (361)
45 (30)
45 (30)
45 (30)
101 (68)
147 (99)
175 (118)
252 (169)
300 (202)
Tensile Load N (lbf) Bending Radius mm (in)
Installation
1335 (300)
1335 (300)
1780 (400)
1780 (400)
2640 (600)
2640 (600)
1335 (300)
1335 (300)
1335 (300)
1335 (300)
1335 (300)
1335 (300)
2670 (600)
2670 (600)
2670 (600)
2670 (600)
2670 (600)
2670 (600)
2670 (600)
Long Term Installation Long Term
400 (90)
400 (90)
534 (120)
534 (120)
400 (90)
400 (90)
400 (90)
400 (90)
400 (90)
197 (7.8)
199 (7.8)
223 (8.8)
192 (7.6)
800 (180) 351 (13.8)
800 (180) 371 (14.6)
400 (90) 97 (3.8)
99 (3.9)
97 (3.8)
99 (3.9)
97 (3.8)
99 (3.9)
890 (200) 151 (5.9)
890 (200) 145 (5.7)
890 (200) 151 (5.9)
890 (200) 145 (5.7)
890 (200) 151 (5.9)
890 (200) 145 (5.7)
890 (200) 178 (7.0)
2670 (600)
2670 (600)
2670 (600)
890 (200)
890 (200)
890 (200)
175 (6.9)
206 (8.1)
203 (8.0)
4448 (1000) 1335 (300) 267 (10.5)
4448 (1000) 1335 (300) 255 (10.1)
131 (5.2)
133 (5.2)
148 (5.8)
128 (5.0)
234 (9.2)
247 (9.7)
65 (2.6)
66 (2.6)
65 (2.6)
66 (2.6)
65 (2.6)
66 (2.6)
101 (4.0)
97 (3.8)
101 (4.0)
97 (3.8)
101 (4.0)
97 (3.8)
119 (4.7)
117 (4.6)
137 (5.4)
135 (5.3)
178 (7.0)
170 (6.7)
1-37 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
Multimode LightCrimp PLUS Connectors
(No epoxy/No polish)
• Easy installation:
– No epoxy, no polishing
– No bench tool required
– Strip, cleave, and crimp
• Match fiber type of cable to boot color of LightCrimp PLUS
• Mates with standard couplers, adapters, and adapter plates
• LC small form factor design is half the size of SC
• Select appropriate part number for termination to:
– 900 µm tight-buffered fiber or 250 µm coated fiber
– 2.0 mm jacketed fiber
– 3 mm jacketed fiber
• LC connector clip turns simplex connectors into duplex connectors and allows for polarity correction after termination
• LC-SECURE LightCrimp PLUS Simplex Connectors can be found in the SECURE Network Solutions
Fiber Products in section 2 of the catalog
OM3 and OM4 (50/125 µm) Multimode LightCrimp
PLUS Connectors (No epoxy/No polish)
ORDERING INFORMATION
Figure A
Figure C
Figure B
Connector Type
LC Simplex
SC Simplex
ST
Duplex LC Clip, package of 6
SC Duplex Clip two are required to make a complete clip
Housing Color Boot Color
Beige Aqua
Beige
Metallic
Black
Black
Aqua
Aqua
Note: Termination instructions may be found at www.te.com/foguide
–
–
Used With
900 µm buffered and 250 µm coated fibers
2.0 mm jacketed cable
900 µm buffered fibers,
250 µm coated fibers, and
3 mm jacketed cable
900 µm buffered fibers,
250 µm coated fibers, and
3 mm jacketed cable
Simplex LC connectors
Figure Part Number
A
B
C
D
6754483-4
1918627-3
6588291-2
6278082-2
1754371-2
Simplex SC connectors E 6348522-1
FigureE
Figure D
1-38 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
50/125 µm OM2 Multimode LightCrimp PLUS
Connectors (No epoxy/No polish)
Figure D
Figure A
Figure B Figure C Figure E
ORDERING INFORMATION
Connector Type
LC Simplex
Housing Color Boot Color
Beige Black
SC Simplex Beige Black
ST Metallic Black
Duplex LC Clip, package of 6
SC Duplex Clip two are required to make a complete clip
Black
Black
Note: Termination instructions may be found at www.te.com/foguide
–
–
Used With
900 µm buffered and 250 µm coated fibers
2.0 mm jacketed cable
900 µm buffered fibers,
250 µm coated fibers, and
3 mm jacketed cable
900 µm buffered fibers,
250 µm coated fibers, and
3 mm jacketed cable
Simplex LC connectors
Simplex SC connectors
Figure Part Number
A 6754483-2
1918627-2
B 6278079-2
C
D
E
6278082-1
1754371-2
6348522-1
1-39 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
62.5/125 µm OM1 Multimode LightCrimp PLUS
Connectors (No epoxy/No polish)
Figure D
Figure A
Figure B Figure C Figure E
ORDERING INFORMATION
Connector Type
LC Simplex
Housing Color Boot Color
Beige Beige
SC Simplex Beige Beige
ST Metallic Beige
Duplex LC Clip, package of 6
SC Duplex Clip two are required to make a complete clip
Beige
Beige
Note: Termination instructions may be found at www.te.com/foguide
–
–
Used With
900 µm buffered and 250 µm coated fibers
2.0 mm jacketed cable
900 µm buffered fibers,
250 µm coated fibers, and
3 mm jacketed cable
900 µm buffered fibers,
250 µm coated fibers, and
3 mm jacketed cable
Simplex LC connectors
Simplex SC connectors
Figure Part Number
A 6754483-1
1918627-1
B 5492643-1
C
D
E
5492642-2
1754371-5
6348522-4
1-40 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
Singlemode LightCrimp PLUS Connectors
(No epoxy/No polish)
Figure D
Figure A
Figure B Figure C Figure E
ORDERING INFORMATION
Connector Type
LC Simplex, APC
LC Simplex
SC Simplex, APC
SC Simplex
ST
Housing Color
Green
Blue
Green
Blue
Metallic
Boot Color
Blue
Blue
Blue
Blue
Black
Duplex LC Clip, package of 6
SC Duplex Clip two are required to make a complete clip
Blue
Blue
–
–
Note: APC (Angle Polish Connector) connectors are for use with other APC products.
Termination instructions may be found at www.te.com/foguide
Used With
900 µm buffered and 250 µm coated fibers
900 µm buffered and 250 µm coated fibers
2.0 mm jacketed cable
900 µm buffered and 250 µm coated fibers
900 µm buffered fibers,
250 µm coated fibers, and
3 mm jacketed cable
900 µm buffered fibers,
250 µm coated fibers, and
3 mm jacketed cable
Simplex LC connectors
Simplex SC connectors
Figure Part Number
2064181-1
A 6754482-1
1918626-1
2064184-1
B 6693276-1
C
D
E
1828953-3
1754371-4
6348522-3
1-41 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
LightCrimp Splice
• Terminates 250 µm coated, 900 µm tight-buffered, and 2.0 mm jacketed fibers
• Use with multimode and singlemode 125 µm diameter fibers
• No epoxy, set-up, or workstation required
• Use Termination Tool Kit part number 1553212-1
• Splice Performance Characteristics:
– Attenuation: Typical 0.1 dB
– Return Loss: (at ambient: 18 to 28° C)
>40 dB Multimode
>60 dB Singele-mode
– Operating Temperature:
-25 to 70° C
• Tensile Retention:
– 250 µm coated: 2.0 N
– 900 µm buffered: 3.0 N
– Jacketed: 50 N
Insert First Fiber and Complete
Buffer Crimp
ORDERING INFORMATION
Insert Second
Fiber and
Actuate Crimp
Description
LightCrimp Splice for 250 µm Coated and 900 µm tight-buffered Fibers
LightCrimp Splice for 2.0 mm Jacketed Fiber
Figure
A
B
Part Number
1985374-1
1985805-1
Figure A
Figure B
Complete Second Buffer
Crimp and Remove
Splice from Tool
1-42 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
Multimode Epoxy/Polish Connectors
• Each connector kit comes with accessories needed to terminate to 250 µm fiber, 900 µm tight-buffered fiber, 900 µm easy-strip, buffer tube splitter kits, 2 mm or 3 mm cable (select appropriate part number)
• Suitable for use with heat-cured or anaerobic (quick cure) adhesive
• See instruction sheet for recommended anaerobic adhesive
• Mates with standard couplers, adapters, and adapter plates
• LC small form factor design is half the size of SC
• Pre-radiused ceramic ferrules for easy polishing
• Duplex SC can be assembled using two simplex
SC connectors and one duplex clip
• Boot type and coupling nut options
(select appropriate part number)
Figure E
Figure A
Figure B
Figure C
Figure D
Figure G
OM3 and OM4 Multimode Epoxy/Polish Connectors
ORDERING INFORMATION
Description Housing Color Boot Color
LC Simplex
Duplex LC Clip, package of 6
SC Simplex
SC Duplex Clip two are required to make a complete clip
ST
Beige
Black
Beige
Black
Black
Metallic
Aqua
–
Aqua
–
Black
Black
Used With
900 µm buffered and
250 µm coated fibers
2 mm jacketed cable
3.0 mm jacketed cable
Simplex LC connectors
900 µ m buffered fibers,
250 µ m coated fibers, and
3 mm jacketed cable
3 mm jacketed cable
900 µ m buffered and
250 µ m coated fibers
2 mm jacketed cable
Figure Part Number
A
B
C
D
E
E
1918385-3
1918267-3
1918375-3
1754371-2
1-5503948-1
1-5503948-0
5504932-5
5504931-5
F 6348522-1 Simplex SC connectors
900 µ m buffered fibers,
250 µ m coated fibers, and
3 mm jacketed cable
900 µ m buffered fibers,
250 µ m coated fibers, and
3 mm jacketed cable
3 mm jacketed cable
900 µ m buffered fibers,
250 µ m coated fibers, and
3 mm jacketed cable
G
G
5503571-3
5492458-1
1-5501380-6
5501380-1
Figure F
1-43 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
50/125 µm OM2 Multimode Epoxy/Polish Connectors
Figure B
Figure E
Figure A
Figure D
Figure C
Figure F Figure G
ORDERING INFORMATION
Description
LC Simplex
Duplex LC Clip, package of 6
SC Simplex
SC Duplex Clip two are required to make a complete clip
ST
Housing Color Boot Color
Beige
Black
Black
–
Beige
Black
Black
Metallic
Black
–
Black
Black
Used With
900 µm buffered and
250 µm coated fibers
2 mm Jacketed Cable
3.0 mm Jacketed Cable
Simplex LC Connectors
900 µ m buffered fibers,
250 µ m coated fibers, and
3 mm Jacketed Cable
3 mm Jacketed Cable
900 µ m buffered and
250 µ m coated fibers
2 mm Jacketed Cable
Simplex SC Connectors
900 µ m buffered fibers,
250 µ m coated fibers, and
3 mm Jacketed Cable
900 µ m buffered fibers,
250 µ m coated fibers, and
3 mm Jacketed Cable
3 mm Jacketed Cable
900 µ m buffered fibers,
250 µ m coated fibers, and
3 mm Jacketed Cable
Figure Part Number
A
B
C
D
1918385-4
1918267-4
1918375-4
1754371-2
E 1-5503948-3
E
F
1-5503948-2
5504932-1
5504931-6
6348522-1
5503571-3
G
G
5492458-1
1-5501380-6
5501380-1
1-44 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
62.5/125 µm OM1 Multimode Epoxy/Polish Connectors
Figure B
Figure E
Figure A
Figure D
Figure C
Figure F Figure G
ORDERING INFORMATION
Description
LC Simplex
Duplex LC Clip, package of 6
SC Simplex
SC Duplex Clip two are required to make a complete clip
ST
Housing Color Boot Color
Beige
Beige
Beige
–
Beige
Beige
Black
Metallic
Beige
–
Black
Black
Used With
900 µm buffered and
250 µm coated fibers
2 mm jacketed cable
3.0 mm jacketed cable
Simplex LC connectors
900 µ m buffered fibers, and
3 mm jacketed cable
3 mm jacketed cable
900 µ m buffered and
250 µ m coated fibers
2 mm jacketed cable
Simplex SC connectors
900 µ m buffered fibers,
250 µ m coated fibers, and
3 mm jacketed cable
900 µ m buffered fibers,
250 µ m coated fibers, and
3 mm jacketed cable
3 mm jacketed cable
900 µ m buffered fibers,
250 µ m coated fibers, and
3 mm jacketed cable
Figure Part Number
A 1918385-1
B
C
D
1918267-1
1918375-1
1754371-5
E 5503948-5
E
F
5503948-1
5504932-6
5504931-1
6348522-4
5503571-3
G
G
5492458-1
1-5501380-6
5501380-1
1-45 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
Singlemode Epoxy/Polish Connectors
Figure B
Figure E
Figure D
Figure A
Figure C
Figure F Figure G
ORDERING INFORMATION
Description
LC Simplex
Duplex LC Clip, package of 6
SC Simplex
SC Duplex
SC Duplex Clip two are required to make a complete clip
ST
Housing Color Boot Color
Blue
Blue
Blue
Blue
Blue
Metallic
Blue
–
Blue
Blue
–
Yellow
Used With
900 µm buffered and
250 µm coated fibers
1.6 to 2 mm jacketed cable
3.0 mm jacketed cable
Simplex LC connectors
900 µ m buffered fibers,
250 µ m coated fibers, and
3 mm jacketed cable
3 mm jacketed cable
900 µ m buffered and
250 µ m coated fibers
2 mm jacketed cable
2 mm jacketed cable
Simplex SC connectors
900 µ m buffered fibers and
3 mm jacketed cable
900 µ m buffered fibers,
250 µ m coated fibers, and
3 mm jacketed cable
900 µ m buffered fibers,
250 µ m coated fibers, and
3 mm jacketed cable, short boot
Figure Part Number
A
B
C
D
1918384-1
1918266-1
1918374-1
1754371-4
E
E
F
G
G
5504646-7
5504646-1
5492123-1
5504934-2
5504655-1
6348522-3
5503613-2
5502579-2
5502580-2
1-46 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
Multimode MT-RJ Jacks
(No epoxy/No polish)
• Patch panel jacks terminate either two 900 µm tight-buffered fibers or two 250 µm coated fibers (select appropriate part number)
• Outlet jacks terminate two 900 µm tight-buffered fibers
• Match fiber type of cable to fiber type of MT-RJ Jack
• No epoxy, no polishing, no crimping
• Two fibers in one ferrule
• Jacks can be reterminated improving yield
• Tunable
• No bench tool required
• Small form factor design is half the size of SC duplex
• Jack design eliminates need for MT-RJ coupler
• Each outlet jack part number includes:
– One MT-RJ jack
– One actuation tool
– One bend-limiting boot
– One SL series housing – allows use in any faceplate or outlet that accepts SL series jacks
• Each patch panel jack part number includes:
– Six patch panel jacks
– Two actuation tools
– One fiber guide
– One icon wheel
• SL series housing and bend limiting boot are also available separately
Strip
MT-RJ Patch Panel Jacks
MT-RJ
Outlet Jack
SL Series
Housing (Gray)
Cleave
OM3 and OM4 Multimode MT-RJ Jacks (No epoxy/No polish)
ORDERING INFORMATION
Description
MT-RJ Patch Panel Jack
MT-RJ Outlet Jack
Jack Color
Gray
Gray
SL Series Housing Color
–
Gray
For Use With
900 µm Tight-Buffered Fibers 250 µm Coated Fibers
6588880-3 6278303-4
1-6278414-2 –
Lock
1-47 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
50/125 µm OM2 Multimode MT-RJ Jacks
(No epoxy/No polish)
MT-RJ
Outlet Jack
SL Series Housing
(Almond)
MT-RJ Patch Panel Jacks
ORDERING INFORMATION
Description
MT-RJ Patch Panel Jack
Jack Color
Black
MT-RJ Outlet Jack Black
SL Series Housing Color
–
Almond
Black
White
Gray
Orange
Blue
Red
Yellow
Green
Violet
Electrical Ivory
For Use With
900 µm Tight-buffered Fibers
6588880-1
6278414-1
6278414-2
6278414-3
6278414-4
6278414-5
6278414-6
6278414-7
6278414-8
6278414-9
1-6278414-0
1-6278414-1
–
–
–
–
–
–
–
–
–
–
250 µm Coated Fibers
6278303-1
–
1-48 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
62.5/125 m OM1 Multimode MT-RJ Jacks
(No epoxy/No polish)
MT-RJ
Outlet Jack
SL Series
Housing
MT-RJ Patch Panel Jacks
ORDERING INFORMATION
Description
MT-RJ Patch Panel Jack
Jack Color
Beige
MT-RJ Outlet Jack Beige
SL Series Housing Color
–
Almond
Black
White
Gray
Orange
Blue
Red
Yellow
Green
Violet
Electrical Ivory
For Use With
900 m Tight-buffered Fibers
6588880-2
250 m Coated Fibers
6278303-2
6278415-1
6278415-2
6278415-3
6278415-4
6278415-5
–
–
–
–
–
6278415-6
6278415-7
6278415-8
6278415-9
1-6278415-0
1-6278415-1
–
–
–
–
–
–
1-49 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
Multimode MT-RJ Jack Accessories
(OM4, OM3, OM2, and OM1)
• Parallel dress clips:
– 1-Port clip holds one MT-RJ jack (sold separately)
– 2-Port clip holds two MT-RJ jacks (sold separately)
– Allow use of MT-RJ jacks in faceplates and outlets that hold flanged optical fiber adapters
– Can be used with HIDEAWAY and HIDEOUT outlets
• Bend limiting boots:
– Compatible with all MT-RJ jacks
– Comes in a package of six
– Protects fiber transition at back of MT-RJ jack
• SL Series housing easily snap into SL series modules, mounting straps, patch panels, and faceplates
• SL series housing accepts one MT-RJ jack sold separately
• MT-RJ outlet jacks not included with any accessory listed here
Figure A
Figure C
ORDERING INFORMATION
Description
Parallel Dress Clip
Bend Limiting Boot
1-Port (Accepts 1 MT-RJ Jack)
2-Port (Accepts 2 MT-RJ Jacks)
Black
Beige
Package Quantity
6
3
6
6
Figure
A
B
C
D
SL Series Housing 1-Port (Accepts 1 MT-RJ Jack) 1
Figure D
SL Series Housing Color
–
–
–
–
Almond
Black
White
Gray
Orange
Blue
Red
Yellow
Green
Violet
Electrical Ivory
Rose
Aqua
Brown
Slate
Figure B
Figure E
Part Number
1374206-1
1374205-1
6374208-4
6374208-5
1374416-1
1374416-2
1374416-3
1374416-4
1374416-5
1374416-6
1374416-7
1374416-8
1374416-9
1-1374416-0
1-1374416-1
2-1374416-3
2-1374416-4
2-1374416-5
2-1374416-6
1-50 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
Multimode Snap-in Adapter Plates
• All snap-in adapter plates fit RMG unloaded optical fiber enclosures
• MT-RJ jack adapter plates:
– Hold up to six (6) MT-RJ (standard or secure) jacks or pigtail jack cable assemblies
– Accepts labeling icons
• MT-RJ plug adapter plates hold up to twelve (12)
MT-RJ plugs (standard only)
• Package quantity = 1 per pack
• SL Series multimedia adapter plates accept SL series jacks and inserts
Figure A
Figure D
Figure G
Figure J
Figure B
Figure E
Figure H
Figure K
OM3 and OM4 (50/125 µm) Multimode Snap-in Adapter Plates
ORDERING INFORMATION
Coupling Adapter
LC Duplex
MT-RJ, Holds 6 Jacks
MT-RJ, 12 Plugs
SC Simplex
SC Duplex
SC Duplex to Dual ST
ST
MPO
Blank
SL Series Multimedia Adapter Plate
–
–
12
–
12
6
12
6
Fibers
12
24
12
24
6
6
Duplex Ports Coupler Count Adapter Color
6 6 Aqua
12
6
12
–
Aqua
–
12
3
3
–
3
3
Black
Aqua
Aqua
–
–
6
–
6
3
6
3
6
3
6
6
6
6
–
–
Aqua
Aqua
Aqua
Metallic
Beige
Black
–
–
Figure Part Number
A 1374463-5
B
C
D
1435516-5
1278328-3
E
F
G
H
I
J
1435440-2
559517-8
559558-6
559596-6
559601-5
1278368-3
559557-1
1278567-1
1374598-1
K
L
559523-1
1479506-1
Figure C
Figure F
Figure I
Figure L
1-51 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
50/125 µm OM2 Multimode Snap-in Adapter Plates
Figure A Figure B Figure C Figure D
Figure E Figure F Figure G Figure H
Figure I Figure J Figure K Figure L
ORDERING INFORMATION
Coupling Adapter
LC Duplex
MT-RJ, Holds 6 Jacks
MT-RJ, 12 Plugs
SC Simplex
SC Duplex
SC Duplex to Dual ST
ST
MPO
Blank
SL Series Multimedia Adapter Plate
–
–
12
–
12
6
12
6
Fibers
12
24
12
24
6
6
Duplex Ports
6
12
6
12
3
3
–
–
6
–
6
3
6
3
Coupler Count
6
12
–
–
3
3
–
–
6
6
6
6
6
3
Adapter Color
Black
Black
–
Black
Black
Black
Black
Black
Black
Metallic
Beige
Black
–
–
Figure Part Number
A 1374463-4
B
C
D
1435516-4
1278328-3
E
F
G
H
I
J
1435440-2
559517-3
559558-5
559596-5
559601-4
1278368-2
559557-1
1278567-1
1374598-1
K
L
559523-1
1479506-1
1-52 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
62.5/125 µm OM1 Multimode Snap-in Adapter Plates
Figure A Figure B Figure C Figure D
Figure E Figure F Figure G
Figure H
Figure I Figure J
Figure K
Figure L
ORDERING INFORMATION
Coupling Adapter
LC Duplex
MT-RJ, Holds 6 Jacks
MT-RJ, 12 Plugs
SC Simplex
SC Duplex
SC Duplex to Dual ST
ST
MPO
Blank
SL Series Multimedia Adapter Plate
–
–
6
6
12
6
12
6
12
–
Fibers
12
24
12
24
Duplex Ports
6
12
6
12
–
–
3
3
6
3
6
3
6
–
Coupler Count
6
12
–
–
6
–
3
3
6
6
6
3
6
–
Adapter Color
Beige
Beige
–
Beige
Beige
Beige
Beige
Beige
Beige
Metallic
Beige
Black
–
–
G
H
I
J
E
F
Figure Part Number
A 1374463-2
B 1435516-2
C 1278328-3
D 1435440-1
K
L
559517-7
559558-1
559596-1
559601-1
1278368-1
559557-1
1278567-1
1374598-1
559523-1
1479506-1
1-53 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
Singlemode Snap-in Adapter Plates
Figure A Figure B Figure C Figure D
Figure E Figure F Figure G Figure H
Figure I Figure J Figure K Figure L
ORDERING INFORMATION
Coupling Adapter
LC Duplex
LC Duplex, APC
MT-RJ, Holds 6 Jacks
MT-RJ, 12 Plugs
SC Simplex
SC Simplex, APC
SC Duplex
SC Duplex, APC
SC Duplex to Dual ST
ST
MPO
Blank
SL Series Multimedia Adapter Plate
6
12
6
12
6
12
–
6
6
12
6
–
–
Fibers
12
24
12
24
12
24
Duplex Ports
6
12
6
12
6
12
3
6
3
6
3
6
–
3
3
6
3
–
–
Note: APC (Angle Polish Connector) connectors are for use with other APC products.
Coupler Count
6
12
6
12
–
–
3
6
6
6
3
6
6
3
3
6
3
–
–
Adapter Color
Blue
Blue
Green
Green
–
Blue
Blue
Green
Blue
Blue
Green
Green
Blue
Blue
Metallic
Blue
Black
–
–
Figure Part Number
A 1374463-1
B 1435516-1
1374463-6
1435516-6
C
D
1278328-3
1435440-3
E
F
G
H
I
J
K
L
559517-1
559517-2
559558-2
559596-2
559558-7
559596-3
559601-6
1278368-5
559515-2
1278567-2
1374598-1
559523-1
1479506-1
1-54 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
Multimode Couplers and Adapters
• MT-RJ couplers mate multimode or singlemode MT-RJ plugs
• Duplex coupler mates four MT-RJ plugs (4-fibers total, 2-fibers/mated pair)
• Simplex coupler mates two MT-RJ plugs (2-fibers total, 2-fibers/mated pair)
• Mounting screws are available for couplers with mounting tabs (flanged)
• FOCIS – compliant designs
Figure A
Simplex
Duplex
Figure B
Simplex
Duplex
OM3 and OM4 Multimode Couplers and Adapters
ORDERING INFORMATION
Description
MT-RJ Coupler
SC Coupler
SC to ST Coupling Adapter
ST Coupler
LC Coupler
Color
Almond
Aqua
Aqua
Metallic/Beige
Aqua
Figure
A
B
C
Simplex
1278017-1
501381-1
Part Number
Duplex
2-5502632-4
2-5502780-1
6374906-1
2-5502776-6
1-5503137-9
504662-2
D – 1-6457567-6
Figure C
Simplex
Dual
Figure D
Duplex
1-55 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Cables and Field Terminated Connectors
62.5/125 µm OM1 Multimode Couplers and Adapters
Figure B Figure C
Figure A
Duplex
Dual
Duplex
Simplex
Simplex
Simplex
ORDERING INFORMATION
Description
MT-RJ Coupler
SC Coupler
SC to ST Coupling Adapter
ST Coupler
LC Coupler
Color
Almond
Beige
Beige
Metallic/Beige
Beige
Figure Simplex
1278017-1
A 5504614-1
B
C
D
5502780-3
501381-1
–
Duplex
6374906-1
5504640-1
5504663-4
504662-2
6457567-5
Figure D
Duplex
Singlemode Couplers and Adapters
Figure A
Figure B
Figure C
Simplex
Duplex
Duplex
Simplex
Duplex
ORDERING INFORMATION
Figure D
Dual
Simplex
Description
MT-RJ Coupler
LC Coupler
SC Coupler
SC to ST Coupling Adapter
ST Coupler
Color
Almond
Blue
Blue
Blue
Metallic/Blue
Figure
C
D
A
B
Simplex
1278017-1
1457062-1
5502632-8
5502780-2
504021-1
Part Number
Duplex
6374906-1
6457567-4
1-5502776-1
5503137-5
503273-5
–
–
–
Quadplex
(Dual Duplex)
–
1695790-4
1-56 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures
Fiber Enclosure Comparison
High Density Equipment Panel
• Most advanced cable management – highest manageable density
• Interchangeable modules for full 10/40/100 migration
• MPOptimate compatible
• Managed and unmanaged
Q3000
• High feature with manageable density
• Uses blades as user interface
• Addresses termination/MPO applications in same chassis
Universal Connectivity Platform
• High versatility with excellent value
• Modular solution for both copper and fiber cassettes
• High density (96fibers in 1U)
TFP
• Medium Feature – Lower density for better connector access
• Modular solution (Unique TE footprint)
• Single chassis for all applications
RMG/AMP NETCONNECT
• Modular solution (LGX* footprint)
• Single chassis for all applications
• Simple design, economical
* LGX is a registered trademark
1-57 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures – High Density Equipment Panel (HDEP)
The High Density Equipment Panel
The High Density Equipment Panel (HDEP) is engineered to address data center needs of today and tomorrow. A true break from traditional cable management thinking, the HDEP seamlessly supports 10/40/100 GbE migration and deployment of TE's highly agile 24-Fiber MPOptimate System. With its unique `s-tray' design, the HDEP provides faster, more uniform installation, quicker Day Two moves, adds and changes, and an unprecedented balance of flexibility, simplicity and smart economics.
FEATURES
• Improved rack efficiency – Up to 144 fibers per 1RU for duplex LC connections and up to 1152 fibers per 1RU in a 24-fiber MPO format
• 10/40/100 Gigabit Ethernet compatible – support 24-fiber trunks, the fundamental building block of the 10/40/100 Gigabit Ethernet system migration
• Chassis feature a unique pivoting cable support mechanism that contains cables and assures proper bend radii through the entire travel of the management trays. Cable binding and tangling is greatly reduced relative to existing sliding tray formats
• Extended depth chassis and extensive tray travel greatly enhance the freedom of access to individual connectors, even at the rear of the chassis, and even when the chassis is mounted directly above switches or servers or at the top of a cabinet
• High Performance – Compatible with TE’s low loss MPOptimate system
• Improves pathway efficiency – Compatible with 24-fiber trunks which save space relative to 12-fiber trunks
ORDERING INFORMATION
Description
Chassis
Unmanaged 1RU chassis
Unmanaged 4RU chassis
Managed 1RU chassis
Part Number
N5CHU-1RU
N5CHU-4RU
Q6CHM-1RU
4RU Chassis
1RU Chassis www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures – High Density Equipment Panel (HDEP)
High Density Equipment Panel (HDEP) fiber MPO-LC modules provide consolidation and branching points for high performance fiber networks.
These modules are compatible with HDEP chassis, frames and hardware and interface with a simple, yet highly engineered cable management system. MPO-
LC modules are fully assembled and snap easily into new or existing support trays within the HDEP chassis.
ORDERING INFORMATION
Product Description
Unmanaged Right Module, LC-MPO Aqua, 24 fibers (1, 24F MPO rear ports), straight fiber path, Optimate performance
Unmanaged Left Module, LC-MPO Aqua, 24 fibers (1, 24F MPO rear ports), straight fiber path, Optimate performance
Part Number
N5MP-24DLMR4AP
N5MP-24DLML4AP
Unmanaged Right Module, LC-MPO Aqua, 24 fibers (1, 24F MPO rear ports), flipped fiber path, Optimate performance
Unmanaged Left Module, LC-MPO Aqua, 24 fibers (1, 24F MPO rear ports), flipped fiber path, Optimate performance
Unmanaged Right Module, LC-MPO Aqua, 24 fibers (1, 24F MPO rear ports), wired 10G HD, Optimate performance
Unmanaged Left Module, LC-MPO Aqua, 24 fibers (1, 24F MPO rear ports), wired 10G HD, Optimate performance
N5MP-24DLMR4BP
N5MP-24DLML4BP
N5MP-24DLMR4FP
N5MP-24DLML4FP
Unmanaged Right Module, LC-MPO Aqua, 24 fibers (2, 12F MPO rear ports), straight fiber path, Optimate performance
Unmanaged Left Module, LC-MPO Aqua, 24 fibers (2, 12F MPO rear ports), straight fiber path, Optimate performance
N5MP-24DLMR2AP
N5MP-24DLML2AP
Unmanaged Right Module, LC-MPO Aqua, 24 fibers (2, 12F MPO rear ports), flipped fiber path, Optimate performance
Unmanaged Left Module, LC-MPO Aqua, 24 fibers (2, 12F MPO rear ports), flipped fiber path, Optimate performance
N5MP-24DLMR2BP
N5MP-24DLML2BP
Unmanaged Right Module, LC-MPO Blue, 24 fibers (2, 12F MPO rear ports), straight fiber path, Singlemode performance
Unmanaged Right Module, LC-MPO Blue, 24 fibers (2, 12F MPO rear ports), flipped fiber path, Singlemode performance
N5MP-24DLMR2AS
N5MP-24DLMR2BS
Unmanaged Left Module, LC-MPO Blue, 24 fibers (2, 12F MPO rear ports), straight fiber path, Singlemode performance
Unmanaged Left Module, LC-MPO Blue, 24 fibers (2, 12F MPO rear ports), flipped fiber path, Singlemode performance
N5MP-24DLML2AS
N5MP-24DLML2BS www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures – High Density Equipment Panel (HDEP)
High Density Equipment Panel (HDEP) fiber adaptor modules provide a connection point for LC and MPO patch cords, hydras and trunks.
These adaptors are compatible with HDEP chassis, frames and hardware and feature a simple, yet highly engineered cable management system. Adaptor modules are fully assembled and snap easily into new or existing support trays within the HDEP chassis.
ORDERING INFORMATION
Product Description
Unmanaged Adapter Pack, LC-LC Aqua, 24 fibers (12 duplex ports)
Unmanaged Adapter Pack, LC-LC Blue, 24 fibers (12 duplex ports)
Unmanaged Adapter Pack, LC-LC Green, 24 fibers (12 duplex ports)
Unmanaged Adapter Pack, MPO-MPO Aqua, 192 fibers (8, 24F MPO ports)
Unmanaged Adapter Pack, MPO-MPO Green, 192 fibers (8, 24F MPO ports)
Part Number
N5AP-24DLCMMS
N5AP-24DLCSMU
N5AP-24DLCSMA
N5AP-192MPOMMS
N5AP-192MPOSMA
MPO Module www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - Q3000
Fiber Enclosures – Q3000
Q3000 Series Fiber Panels are the latest innovation in the Quareo suite of products. The
Q3000 Series fiber enclosure supports applications with high density fiber terminations through simplified access to individual connectors, combined with enhanced cable management features.
The Q3000 series accommodates singlemode and multimode LC and MPO connectivity. Q3000 panels are compatible with the Quareo Cross-Connect Frame to provide enhanced density in an accessible yet highly-managed system.
FEATURES
• Support IEEE 802.3ae, IEEE 802.3ba, IEEE 802.3z
• Exceed ANSI/TIA-568-C.3 and ISO 11801 Edition 2 cabling system requirements
• OM3/OM4 and OS2
• 19-Inch rack mountable
• Available in 1, 2, and 4RU chassis
• 48-fiber (24 Duplex LC) LC-to-LC or LC-to-MPO blade
• 192-fiber (16 MPO Ports) MPO-to-MPO blade
ORDERING INFORMATION
Product Description
Fiber Enclosures
– Q3000
Q3000 Blades
Q3000 series chassis
Front door kits
Blank blade cover
LC to LC; 24 Port
Duplex LC (48fiber), LC-to-LC
LC to MPO; 24
Duplex LC ports
(48-fibers) distributed from
2 each 12 fiber
MPO connectors
MPO to MPO; 16
MPO ports with
12-fibers each
1RU (1.75" x 19" x 15"), accommodates 2 blades
2RU (3.5" x 19" x 15"), accommodates 4 blades
4RU (7" x 19" x 15"), accommodates 8 blades
1RU
2RU
4RU
For covering unused slots in
Q3000 or Q4000 chassis
OM3/OM4 Multimode LC-LC blade
Singlemode LC-LC blade
OM3/OM4 Multimode
LC-MPO elite blade
Multimode (OM3/OM4) Loss
(<0.5 dB) @ 850 nm/1300 nm
Singlemode ultra polish
LC-MPO elite blade
Singlemode Loss (<0.75 dB)
@ 1310 nm/1550 nm
OM3/OM4 Multimode
MPO-MPO elite blade
Singlemode MPO-MPO blade
Part Number
QUCH-1RU
QUCH-2RU
QUCH-4RU
QDR-1RU
QDR-2RU
QDR-4RU
QBCB-HR
QUFB-48FDLCLMMHR
QUFB-48FDLCLSMHR
QUFB-48FDLCMM3HR
QUFB-48FDLCMSMHR
QUFB-192FMPOMMHR
QUFB-192FMPOSMHR
1RU
2RU
4RU
LC-LC Blade
LC-MPO Blade
MPO-MPO Blade
1-61 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures – Universal Connectivity Platform
Universal Connectivity Platform —
A Modular Approach to Infrastructure Design
TE Connectivity’s Universal Connectivity Platform (UCP) provides a fully modular approach to designing data centers and telecommunications rooms. This patch panel is ideal for rapidly evolving environments because it supports both TE’s plug-and-play copper and fiber solutions.
TE’s UCP enables business transformation by virtue of its modularity. It is designed to accommodate all of TE’s cabling media, whether copper or fiber, to support the 10, 40 and 100 Gigabit network connections in a single patch panel. By simply selecting the media, network equipment can be changed in a controlled fashion as the network demands.
Rack space is always a premium in the data center or telecommunications room, especially in existing infrastructure. The UCP is designed with this in mind, incorporating maximum flexibility for different needs and architecture. The panels can be installed in a 19 inch cabinet/rack, or installed overhead or under raised floors. By moving the panels overhead or under the floor, they can be easily shared between cabinets/racks.
Data Centers and co-location sites have undergone radical changes over the past few years and will again in the future. TE’s Universal Connectivity Platform helps network managers address this change by delivering added flexibility and scalability.
FEATURES
• Multimedia Quick-Fit configurations accommodate both copper and fiber
• Compatible with MPOptimate multimode (OM3/
OM4) and singlemode (OS1/OS2) fiber media
• Compatible with U/UTP, F/UTP and S/FTP copper media
• Can be installed inside a cabinet/rack, to a wire basket or under a raised floor
• Scalable to meet all applications from 100 Mbps to
100 Gbps including high-density 10 Gbps deployments
1-62 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures – Universal Connectivity Platform
UCP Patch Panel
FEATURES
• 19” unloaded modular patch panel with 4 Quick-Fit cutouts
Description
UCP Patch Panel 1RU Flush; includes grounding bolt and rear cable support bar
UCP Patch Panel 1RU Flush; without cable support bar
UCP Patch Panel 2RU Flush; without cable support bar
UCP Patch Panel 1RU Recessed Angled; without cable support bar
UCP Patch Panel 2U Recessed Angled; without cable support bar
Part Number
1-1671594-2
2111761-1
2111762-1
1671590-5
1671590-6
UCP Drawer Style Enclosure
FEATURES
• 19" 1RU enclosure with Quick-Fit cutouts
• Mounting bracket for flush or recessed mounting
Description
1RU Drawer style Enclosure
Part Number
1933443-1
Zero RU Quick-Fit Bracket
FEATURES
• Bracket designed for copper and fiber Quick-Fit cassettes and modules
• 5" horizontal clearance required
Description
Zero RU Quick-Fit Bracket; includes grounding bolt
Part Number
1-1671548-1
1-63 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures – Universal Connectivity Platform
MRJ21 Quick-Fit Cassettes
Compatible with MRJ21 cable assemblies for superior performance.
FEATURES
• Factory terminated and tested
• Available in 1GbE and 10GbE
• High-density
– 48 ports 1RU 1000 BASE-T
– 32 Ports 1RU 10 GBASE-T
• Integrated bonding
Description
MRJ21 XG Quick-Fit cassette for 10GBase-T
MRJ21 Quick-Fit cassette for 1000BaseT
Part Number
2153115-1
1711970-1
STP and UTP Quick-Fit Modules
FEATURES
• Accommodates CAT 5e, 6, 6A SL jacks
• STP version has integrated bonding
• Labels included
Description
STP Quick-Fit module
UTP Quick-Fit module
Blank Module; used to close unused cut-outs in panels
Part Number
2111093-1
2111117-1
1479698-1
10 GbE
1 GbE
Quick-Fit Module
Blank Module
1-64 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures – Universal Connectivity Platform
MPOptimate to LC 10 Gigabit Quick-Fit Cassettes
12-Fiber Trunking Solutions
FEATURES
• Factory terminated and tested
• Front: 6 x LC Duplex or 6 x LC Quad
Back: one or two 12 fiber MPO or MPOptimate connector(s)
• Available in OS2, OM3 or OM4 MPOptimate
• Port number labeling and additional label strip included
• Part numbers noted are Straight Polarity. Other polarities are available upon request
Description
LC duplex
LC quad
Fiber Type
50 µm, MM, OM3
9 µm, SM, OS2
50 µm, MM, OM4 MPOptimate
50 µm, MM, OM3
9 µm, SM, OS2
50 µm, MM, OM4 MPOptimate
Fiber Count Part Number
12 1671205-3
12
12
1671205-4
1671226-5
24
24
24
1671206-3
1671206-4
1671227-5
MPOptimate to LC 10 Gigabit Quick-Fit Cassettes
24-Fiber Trunking Solutions
FEATURES
• Factory terminated and tested
• Front: 12 x LC Duplex
Back: 1 x 24 fiber MPO connector
• Available in OM4 MPOptimate
• Port number labeling and additional label strip included
Description
Cassette OM3 Straight A-A/B-B
Cassette OM3 Polarity Flipped A-B/B-A
Cassette OM4 Straight A-A/B-B
Part Number
2160266-3
1-2160266-3
2160266-5
Cassette OM4 Polarity Flipped A-B/B-A 1-2160266-5
LC Duplex
LC Quad
1-65 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures – Universal Connectivity Platform
MPOptimate 40 Gigabit Quick-Fit Cassettes
FEATURES
• Factory terminated and tested
• Front: 6 x 8-fiber MPO connectors
Back: 2 x 24 fiber MPO connector
• MPOptimate
• Port number labeling and additional label strip included
• Fiber path for part numbers noted is Polarity “A” or Polarity “B”
Description Part Number
Cassette OM4 Straight A-A/B-B 2160530-5
Cassette OM4 Polarity Flipped A-B/B-A 1-2160530-5
MPO/MPOptimate Quick-Fit Module
FEATURES
• Quick-Fit modules with 6 or 12 MPO couplers
• Compatible with 10/40/100 Gbps MPO trunks and arrays
• Port number labeling and additional label strip included
• MPO coupler joins MPO pinned to non-pinned connectors
Description
6x MPO coupler module; black
12x MPO coupler module
Part Number
1671200-1
1711987-1
Quick-Fit Fiber Modules
FEATURES
• Available in LC and SC configurations
• Available in singlemode and multimode
Description
12 Fiber LC
12 Fiber LC
24 Fiber LC
24 Fiber LC
12 Fiber SC
12 Fiber SC
Fiber Type
OM3/OM4
SM
OM3/OM4
SM
OM3/OM4
SM
Ferrule
Ceramic
Ceramic
Ceramic
Ceramic
Ceramic
Ceramic
Color aqua blue aqua blue aqua blue
Part Number
0-1671196-3
0-1671196-1
0-1671202-3
0-1671202-1
1671201-3
1671201-1
6x 40G Cassette
6x MPO Coupler Module
12 Fiber LC
24 Fiber LC
1-66 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures – Universal Connectivity Platform
Vertical Panel Mounting Brackets
FEATURES
• Fully flexible system for installing 19” panels vertically outside of the 19” area
• Available in 1RU
Description
1RU Vertical Panel Mounting Brackets
Part Number
1-1671549-1
Subfloor Panel Holder Kit
FEATURES
• Fully flexible system for installing 19” panels underneath cabinets/racks in raised floor environments
• Pedestal distance maximum 24"
• The clamping range varies from 0.6" up to 1.2"
• Pedestal can be round or square
• Available in 2RU
Description
Subfloor Panel Holder Kit 2RU
Part Number
1671189-2
Aerial Panel Holder Kit for Wire Mesh Cable Trays
FEATURES
• Fully flexible system for installing 19” panels above cabinets/racks
attached to wire mesh cable trays
• Available in 2RU
Description
Aerial Panel Holder Kit (2RU)
Part Number
1-1671603-1
Note:
For information on Copper and Fiber cable assemblies visit www.te.com/EnterpriseNetworks to view the below documents.
Fiber trunk assemblies and patch cords, see document numbers 402-1007 and 402-1008.
1-67 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - TFP
Fiber Enclosures – TFP Series Rack Mount Fiber Panels
The rack mount TrueNet Fiber Panel (TFP) is an integral part of TE's fiber product portfolio. The TFP fiber panels can be ordered in one, two, four and five rack unit sizes and are completely modular to configure to a variety of applications. The unique modular adapter packs incorporate an angled adapter design to allow easy access to each port and superior cable management and bend radius protection.
FEATURES
• TFP panels combine the unique features of vertical cable guides and angle-left/angle-right adapters, offering bend radius protection, intuitive routing and easy connector access
• Rear access makes field termination or splicing fast and efficient. 1RU and
2RU versions feature convenient sliding access to terminations and splicing
• Sold separately for maximum flexibility with minimum lead time, TFP adapter packs can also be pre-configured at the factory for more efficient service turn-up
• 288-position high-density termination/splice in the space of just five rack units (8.75-inch)
• Panels are equipped with adjustable mounting brackets to provide either 19- or 23-inch rack or cabinet mounting (EIA or WECO) as well as 4- or 5-inch recess mounting
• Field-installable vertical cable guides on either side of the panel provide bend radius protection and management of fibers exiting the panel
APPLICATIONS AND BENEFITS
• Best suited for rack or cabinet mounting in horizontal and equipment distribution areas
• Modularity, functionality and density make the TFP ideal for mounting in close proximity to servers, switches, routers and SANs
1-68 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - TFP
TFP Empty Chassis
ORDERING INFORMATION
Termination only rack or cabinet mount, Black
1RU empty panel, black; accommodates 1 angle LEFT and
1 angle RIGHT adapter packs; T-handle latch close
2RU empty panel, black; accommodates 2 angle LEFT and 2 angle RIGHT adapter packs; T-handle latch close
4RU empty panel, black; accommodates 4 angle LEFT and 4 angle RIGHT adapter packs; T-handle latch close
5RU empty panel, black; accommodates 6 angle LEFT and 6 angle RIGHT adapter packs; T-handle latch close
Dimensions Part Number
1.75"
3.50"
7.00"
8.75"
TFP-1TT00-000B
TFP-2TT00-000B
TFP-4TT00-000B
TFP-5TT00-000B
Accessories
Heat Shrink Fusion Splice Tray (Splice Tray Capacity: 48 fibers)
Velcro Kit for Splice Tray
Blank plates
FST-HS-48
TFP-VELSTP
TFP-00AP00
TFP Series Rack Mount Fiber Panels
GENERAL SPECIFICATIONS
Maximum Density
LC Connector:
SC Style Connector:
Adapter Pack Configuration:
1RU
48
24
2 modular adapter packs:
1 Angle right/
1 Angle left
2RU
96
48
4 modular adapter packs:
2 Angle right/
2 Angle left
4RU
192
96
8 modular adapter packs:
4 Angle right/
4 Angle left
5R
288
144
12 modular adapter packs:
6 Angle right/
6 Angle left
1-69 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - TFP
TFP Product Overview
Recommended Applications
Description
Chassis sizes in rack units
Termination only capacity using:
Simplex adapters
Duplex adapters
Small form factor (LC)
Flexibility/ablity to grow
Interconnect
Cross-connect
Accommodates on-frame splicing
Rear access
All-front-access
Customer premises application
19" mounting
23" mounting
Cabinet mount
Wall mount
Mix equipment with fiber product?
Vertical cable guide
Features at a Glance
Multi-purpose high-density modular solution ideal for cabinet or rack mount applications near servers, switches, routers and SANS
Termination, termination/splice
1, 2, 4, and 5
Yes
Yes
No
24, 48, 96, 144
24, 48, 96, 144
48, 96, 192, 288
Ideal for growth
Yes
Yes
Yes. Built-in
Yes
No
Ideal
Yes
Ideal
Ships with every panel
Angled left/right adapter packs, highest density with maximum cable management features
SPECIFICATIONS
Storage/operating temperature:
Approximate weight (empty panel)
1RU model:
2RU model:
4RU model:
5RU model:
40 to 85° C (-40° to 185° F)
8.25 lbs
10.25 lbs
15.91 lbs
15.86 lbs
1-70 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - TFP
TFP Series Standard Adapter Packs
The TFP series offers a variety of standard modular adapter packs to accommodate most applications. The modular design is user-friendly and offers maximum flexibility to the end-user (for other adapter offerings or adapter packs loaded with pigtails, see the custom configuration section).
The TFP modular adapter packs can only be used with the TFP series panels. They are not interchangeable with RMG, WMG, FL1000 or FL2000 panels.
TFP Fiber Panel TFP Adapter Pack
ORDERING INFORMATION
Description
OM1/OM2 Multimode Adapter Only Packs
SC duplex adapters, 6 adapters or 12 fiber ports per adapter pack
Color Pack Orientation Part Number
LC adapters, 12 adapters or 24 fiber ports per adapter pack
OM3/OM4 Multimode Adapter Only Packs
Beige
Left
Right
Left
Right
SC duplex adapters, 6 adapters or 12 fiber ports per adapter pack
LC adapters, 12 adapters or 24 fiber ports per adapter pack 1
Singlemode Adapter Only Packs
SC duplex adapters, 6 adapters or 12 fiber ports per adapter pack
LC adapters, 12 adapters or 24 fiber ports per adapter pack
OM3 Multimode Adapter Packs with Stranded Pigtails
SC duplex adapters, 6 adapters or 12 fiber ports per adapter pack
LC adapters, 12 adapters or 24 fiber ports per adapter pack
OM4 Multimode Adapter Packs with Stranded Pigtails
SC duplex adapters, 6 adapters or 12 fiber ports per adapter pack
LC adapters, 12 adapters or 24 fiber ports per adapter pack
Singlemode Adapter Packs with Stranded Pigtails
1
SC UPC duplex adapters, 6 adapters or 12 fiber ports per adapter pack
LC UPC adapters, 12 adapters or 24 fiber ports per adapter pack
Aqua
Blue
Aqua
Aqua
Blue
Left
Right
Left
Right
Left
Right
Left
Right
Left
Right
Left
Right
Left
Right
Left
Right
Left
Right
Left
Right
1 TE Connectivity recommends the use of aqua colored adapters with laser-optimized multimode fiber for 10 Gigabit applications for circuit identification.
TFP-12APLC3
TFP-12APRC3
TFP-24APLQ1
TFP-24APRQ1
TFP-12APLC4
TFP-12APRC4
TFP-24APLQ2
TFP-24APRQ2
TFP-12APLC8
TFP-12APRC8
TFP-24APLQ5
TFP-24APRQ5
TFP-12APLC4DE3
TFP-12APRC4DE3
TFP-24APLQ2DE3
TFP-24APRQ2DE3
TFP-12APLC4FE3
TFP-12APRC4FE3
TFP-24APLQ2FE3
TFP-24APRQ2FE3
TFP-12APLC8SB3
TFP-12APRC8SB3
TFP-24APLQ5SB3
TFP-24APRQ5SB3
1-71 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - TFP
TFP Custom Adapter and Preterminated Adapter Packs
TE Connectivity's TFP modular adapter packs are available to be shipped from the factory with preterminated 3 meter pigtails or in non-standard ST or SC adapter only configurations. These custom configurations can simplify the ordering process and reduce installation time and cost for the end-user.
Please note, these products are non-standard or custom configurations based on the end-user's needs.
Part Number
TFP - __ AP __ __ __ __ __
Number of Fiber Parts
12 12 fiber ports: 6 LC adapters; 6 SC duplex adapters; 12 ST adapters
24 24 fiber ports: 12 LC adapters
Adapter Pack Orientation
L
R
Left Adapter Pack
Right Adapter Pack
Adapter Style
Multimode Connectors
C3
C4
SC duplex (beige) with phosphorus/bronze
SC duplex (aqua) with zirconia sleeve
Q1
Q2
T1 ST with phosphorus/bronze sleeve
Singlemode Connectors
C8 SC duplex (blue) with zirconia sleeve
A1
LC (beige) with phosphorus/bronze
LC (aqua) with zirconia sleeve
Q5
T2
SC duplex (green) angled polished
(APC) with zirconia sleeve
LC (blue) with zirconia sleeve
ST with phosphorus/bronze sleeve
Pigtail Length
Leave
Blank
3
Adapters only
3 meter pigtails 1
Pigtail Type
Leave
Blank
B
Adapters only
Singlemode stranded
E Multimode stranded
Fiber Size
Leave
Blank
Adapters only
C
D
F
S
Multimode 50/125
Multimode 50/125 ultra (laser optimized to 300 meters)
OM4 - 50/125
LOMMF 550 m
Singlemode
1 Note: Adapter packs with pigtails come automatically as a left/right pair. This is to ensure the color order scheme is correct on both the angled left and angled right sides. Please use the configurator to select the correct adapter pack style and count; a left and right version will be shipped.
1-72 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - TFP
TFP Pre-configured Termination/Splice Fiber Panels
TE Connectivity's TFP series fiber panels are available to be shipped with factory installed adapter packs and/or preterminated pigtail assemblies which simplifies the ordering process and reduces installation and costs. These products are non-standard or custom configurations based on the end-user's needs.
Part Number
TFP - __ __ __ __ - __ __ __ __
Panel Color
B Black
Panel Size
1T
2T
2RU (1.75")
5L 5RU (8.75")
4T 4RU (7.00")
5T
2RU (3.50")
5RU (8.75")
Accommodates 2 adapter packs; quarter turn latch close
Accommodates 4 adapter packs; quarter turn latch close
Accommodates 12 adapter packs; key-lock close
Accommodates 8 adapter packs; quarter turn latch close
Accommodates
12 adapter packs;
T-handle latch close
Panel/Pigtail Type
A Termination only with adapter packs, no pigtails
P Termination/Splice with adapter packs with singlemode stranded pigtails
B Termination/Splice with adapter packs with
50/125 multimode stranded pigtails
D Termination/Splice with adapter packs with 50/125 multimode stranded ultra pigtails (laser optimized to 300 meters)
E Termination/Splice with adapter packs with
62.5/125 multimode stranded pigtails
Splice Deck Type
0
1
None
Heat shrink fusion
Loaded Adapter Packs
01 1 adapter pack loaded
02 2 adapter packs loaded
03 3 adapter packs loaded
04 4 adapter packs loaded
06 6 adapter packs loaded
08 8 adapter packs loaded
12 12 adapter packs loaded
Connector Style
Multimode Connectors
C3
C4
Q1
Q5
T2
SC duplex (beige) with phosphorus/bronze sleeve
SC duplex (aqua) with zirconia sleeve
LC (beige) with phosphorus/bronze sleeve
Q2
T1
LC (aqua) with zirconia sleeve
ST with phosphorus/bronze sleeve
Singlemode Connectors
C8
A1
SC duplex (blue) with zirconia sleeve
SC duplex (green) angle polished
(APC) with zirconia sleeve
LC (blue) with zirconia sleeve
ST with phosphorus/bronze sleeve
1-73 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - TFP
TFP Plug-and-Play Cassettes
TE’s TrueNet Fiber Panels (TFP) combine the unique features of vertical cable guides and our patented angle-left/angle-right adapters, which offer bend radius protection, intuitive routing and easy connector access. Our TFP series can be ordered in one, two, four or five rack-unit sizes to fit your unique needs. Designed for rack or cabinet mounting in the horizontal or equipment distribution area, the TFP’s modularity, functionality and density make them ideal for mounting in close proximity to servers, switches, routers and SANs.
The TFP’s functionality can be extended with its plug-and-play angled cassettes, which add up to 24-fiber terminations each for jumper management in SANs-rich environments. These cassettes snap into place effortlessly; and even come from the factory prelabeled with simple installation instructions.
FEATURES
• Eliminates the need for on-site fiber terminations, which means rapid deployments
• Incorporates angle-left/angle-right adapters to ensure proper bend radius
• Uses the same 1, 2, 4, and 5 rack unit standard TFP chassis, which simplifies ordering
ORDERING INFORMATION
Description
Termination only rack or cabinet mount panel, black
1RU empty panel, black; accommodates 2 plug-and-play cassettes; T-handle latch close
2RU empty panel, black; accommodates 4 plug-and-play cassettes; T-handle latch close
4RU Termination only empty chassis, accommodates 8 TFP modular adapter packs; black
5RU empty panel, black: accommodates 12 plug-and-play cassettes; T-handle latch close
Plug-and-Play Cassettes
OM3 - 50/125 LOMMF 300 m
12-fiber cassettes; 6 LC (aqua) to 1 MPO adapter
24-fiber cassettes; 12 LC (aqua) to 2 MPO adapters
OM4- 50/125 LOMMF 550 m
12-fiber cassettes; 6 LC (aqua) to 1 MPO adapter
24-fiber cassettes; 12 LC (aqua) to 2 MPO adapters
Singlemode
12-fiber cassettes; 6 LCUPC to 1 MPO adapter
24-fiber cassettes; 12 LCUPC to 2 MPO adapters
Part Number
TFP-1TT00-000B
TFP-2TT00-000B
TFP-4TT00-000B
TFP-5TT00-000B
Angle LEFT cassette
Angle RIGHT cassette
Angle LEFT cassette
Angle RIGHT cassette
TFP-12MPLDQ2
TFP-12MPRDQ2
TFP-24MPLDQ2
TFP-24MPRDQ2
Angle LEFT cassette
Angle RIGHT cassette
Angle LEFT cassette
Angle RIGHT cassette
TFP-12MPLFQ2
TFP-12MPRFQ2
TFP-24MPLFQ2
TFP-24MPRFQ2
Angle LEFT cassette
Angle RIGHT cassette
Angle LEFT cassette
Angle RIGHT cassette
TFP-12MPLSQ5
TFP-12MPRSQ5
TFP-24MPLSQ5
TFP-24MPRSQ5
1-74 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - TFP
TFP Plug-and-Play Cassettes
Angle Left Polarity/Wiring Scheme
MPO – Fiber Position
MPO-1
MPO-2
LC Connector
LC-1 and LC-13
LC-2 and LC-14
MPO-3
MPO-4
MPO-5
MPO-6
MPO-7
MPO-8
MPO-9
MPO-10
MPO-11
MPO-12
LC-3 and LC-15
LC-4 and LC-16
LC-5 and LC-17
LC-6 and LC-18
LC-7 and LC-19
LC-8 and LC-20
LC-9 and LC-21
LC-10 and LC-22
LC-11 and LC-23
LC-12 and LC-24
Fiber Color
Blue
Orange
Green
Brown
Slate
White
Red
Black
Yellow
Violet
Rose
Aqua
Angle Right Polarity/Wiring Scheme
MPO – Fiber Position LC Connector
MPO-1 LC-2 and LC-14
MPO-2
MPO-3
LC-1 and LC-13
LC-4 and LC-16
MPO-4
MPO-5
MPO-6
LC-3 and LC-15
LC-6 and LC-18
LC-5 and LC-17
MPO-7
MPO-8
MPO-9
MPO-10
MPO-11
MPO-12
LC-8 and LC-20
LC-7 and LC-19
LC-10 and LC-22
LC-9 and LC-21
LC-12 and LC-24
LC-11 and LC-23
Red
Black
Yellow
Violet
Rose
Aqua
Fiber Color
Blue
Orange
Green
Brown
Slate
White
1-75 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - TFP
Panel Configurations
SPECIFICATION
TFP series chassis utilize modular adapter packs which are unique to either the right or left position of the chassis. The left/right position must be specified to ensure proper adapter orientation and color order in the backplane. Information below illustrates the various configurations for the three TFP chassis.
1RU Chassis
MPL
2RU Chassis
MPL
MPL
MPR
MPR
MPR
5 RU Chassis
MPL
MPL
MPL
MPL
MPL
MPL
MPR
MPR
MPR
MPR
MPR
MPR
MPL = angle left plug-and-play cassette
MPR = angle right plug-and-play cassette
4RU Chassis
MPL
MPL
MPL
MPL
MPR
MPR
MPR
MPR
Plug-and-Play trunks
MPO connector mated pairs
TFP Plug-and-Play Cassette
MPO connector mated pairs
TFP Plug-and-Play Cassette or
Optical Distribution Frame Plug-and-Play Block
LC Adapters
OPTICAL SPECIFICATIONS
MODULE LOSS (MEASURED THROUGH MPO MATED PAIR TO LC ADAPTER): 850 NM
INSERTION LOSS:
Maximum:
Typical:
RETURN LOSS:
Maximum:
TRUNK LOSS (PER METER):
Maximum:
0.5 dB
0.25 dB
—
.0035 dB
CHANNEL/LINK LOSS with 31 m trunk (100') as in figure above:
Maximum:
Typical:
1.1085 dB
1310 NM
0.55 dB
0.25 dB
-55 dB
.001 dB
1.131 dB
0.6085 dB 0.531 dB
ENVIRONMENTAL CHARACTERISTICS
Storage Temperature:
Operating Temperature:
Installation Temperature:
-40° to 70° C
0° to 70° C
0° to 70° C
(-40° to 158° F)
(32° to 158° F)
(32° to 158° F)
1-76 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
TFP MPO Pack
TE introduces an MPO adapter pack for the TFP series fiber panel enclosures.
This unique adapter pack contains 6 MPO adapters to terminate 6 (12 fiber)
MPO trunks in each one. Due to their high density, the MPO adapter packs are only available for the 1 and 2RU TFP chassis. With the use of these adapter packs, the 1RU will hold 144 fiber terminations, and the 2RU will hold 288 terminations.
The TFP MPO adapter pack is ideally suited for applications with high-density switches, where the additional loss of the MPO cassette is not desired. Either the microcable trunks or high count plug-and-play trunks can be terminated in the back of the adapter pack and a plug-and-play array cable can be terminated in the front of the adapter pack.
FEATURES
• Provides higher density in 1, 2RU TFP chassis by terminating 12 fibers in each adapter
• Limits insertion loss for loss sensitive optical budgets
• Unique angle right/angle left design allows for optimal management of the array cables off the front of the panel
ORDERING INFORMATION
Description
Termination Only Rack Mount Panel
1RU empty panel, black; accommodates 2 modular adapter packs; T-handle latch close
2RU empty panel, black; accommodates 24 modular adapter packs; T-handle latch close
MPO adapter pack
Contains 6 MPO adapters; can be installed in either left or right position
Cable Clamp
For use with 1/2RU chassis with high fiber count trunk applications
Part Number
TFP-1TT00-000B
TFP-2TT00-000B
TFP-72AP0MP
TFP-ACC002
1-77 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - RMG/AMP NETCONNECT
Fiber Enclosures – RMG/AMP NETCONNECT Series Fiber Enclosures
TE introduces the RMG/AMP NETCONNECT series of rack mount fiber enclosures as an integral part of the TE's product portfolio. The RMG/AMP NETCONNECT series fiber enclosure provides rugged and durable protection for patching or splicing of fiber cables. Especially designed to be user friendly, the slide-out design and removable front and rear panels provide convenient access points.
TE's RMG/AMP NETCONNECT series offers a cost effective and high-density rack mount fiber enclosure in one, two and four rack unit sizes. Its modular design and flexible configurations make it very user friendly and easy to install.
FEATURES
• 1RU and 2RU units contain sliding and removable front and rear access panels, providing convenient access points
• Designed for 48.26 cm (19 inch) EIA rack or cabinet environment; optional brackets to accommodate 58.42 cm (23 inch) rack or cabinet mounting
• Density: up to 72 terminations in 1RU
• Low profile design with higher density for space limited applications
• User friendly design utilizing industry standard LSX/LGX modular adapter packs
• Side and rear cable entry points on back of panel supports a wide range of deployment applications
RMG/AMP NETCONNECT Empty Panels
ORDERING INFORMATION
Description
Rack or Cabinet Mount Panel, black
1RU empty panel; accommodates 3 modular adapter packs; black
2RU empty panel; accommodates 6 modular adapter packs; black
4RU empty panel; accommodates 12 adapter packs; also includes cable management bracket and cable clamp; black
Accessories
Cable Clamp Kit (for 1RU and 2RU)
Blank Plates
Splice Tray
Heat shrink fusion (Splice Tray Capacity: 24 fibers)
Mechanical (Splice Tray Capacity: 24 fibers)
Extender Brackets; 48.26 cm (19" - 23")
1RU
2RU
Q-Frame 4RU Mounting Bracket
Panel Height
4.45 cm (1.75")
8.89 cm (3.50")
17.78 cm (7.00")
Part Number
RMG-1000-000B
RMG-2000-000B
RMG-4000-000B
RMG-ACC001
RMG-00ADP00
FST-DV-HS
FST-D-MT
EB-17B
EB-35B
RMG-ACCQBRKT4RU
1-78 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - RMG/AMP NETCONNECT
RMG/AMP NETCONNECT Product Overview
Recommended Applications
Description
Chassis sizes (in rack units)
Termination only capacity using:
Simplex adapters
Duplex adapters
Small form factor (LC)
Flexibility/ablity to grow
Interconnect
Cross-connect
Accommodates on-frame splicing
Rear access
All-front-access
Customer premises application
19" mounting
23" mounting
Cabinet mount
Wall mount
Mix equipment with fiber product?
Vertical cable guide
Features at a Glance
Multi-purpose high-density modular solution ideal for telecommunications closets or to terminate incoming fiber trunks
Termination, termination/splice
1, 2, and 4
18, 36, 72
36, 72, 144 (includes standard LC)
72, 144, 288 (using quad LC)
Ideal for growth
Yes
No
Yes. Built-in
Yes
Yes
Ideal
Yes
Yes, with separate extender bracket
Yes
No
Ideal
No
Limited cable management, high density with features and price comparable to traditional LGX style panels.
RMG/AMP NETCONNECT SPECIFICATIONS
Storage/operating temperature:
Approximate weight (empty panel)
1RU model:
2RU model:
4RU model:
Configuration options and capacity
Termination only
1RU maximum density 1 :
2RU maximum density 1 :
4RU maximum density 1 :
Termination/splice
1RU maximum density:
2RU maximum density:
4RU maximum density:
-40° C to 85° C (-40° F to 185° F)
5.44 Kg (12 lbs)
5.90 Kg (13 lbs)
6.80 Kg (15 lbs)
72 terminations
144 terminations
288 terminations
36 terminations
72 terminations
144 terminations
1 Maximum density achieved using quad LC connectors.
1-79 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - RMG/AMP NETCONNECT
RMG/AMP NETCONNECT Maximum Capacity by Adapter Style and Chassis Height
TERMINATION ONLY APPLICATION
Chassis Height
(in Rack Units)/
Application
1
1
1
2
2
4
4
2
4
Maximum Number of Fiber
Terminations in Chassis
18
36
72
36
72
144
72
144
288
Maximum Number of
Adapter Packs per
Chassis
3
3
3
6
6
6
12
12
12
Number of Fiber
Terminations per Adapter Pack
6
12
24
6
12
24
6
12
24
Adapter Style
Simplex SC, ST
Duplex SC, standard LC,
Quad LC
Simplex SC, ST
Duplex SC, standard LC,
Quad LC
Simplex SC, ST
Duplex SC, standard LC,
Quad LC
TERMINATION/SPLICE APPLICATION
Chassis Height
(in Rack Units)/
Application
1
1
1
2
4
2
2
4
4
Maximum Number of Fiber
Terminations in Chassis
18
36
48
36
72
96
72
144
144
Maximum Number of
Adapter Packs per
Chassis
3
3
2
4
12
6
6
12
12
Number of Fiber
Terminations per Adapter Pack
6
12
24
6
12
24
6
12
24
Adapter Style
Simplex SC, ST
Duplex SC, standard LC,
Quad LC
Simplex SC, ST
Duplex SC, standard LC,
Quad LC
Simplex SC, ST
Duplex SC, standard LC,
Quad LC
1-80 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - RMG/AMP NETCONNECT
Unloaded Rack Mount Patch Enclosures
Snap-in adapter plates or MPO cassettes sold separately
1U enclosure 1657014 features:
• Heavy duty, smooth operating, slide mounting brackets
• Clear, removable top cover
• Flush mounting
• Holds 2 splice trays (sold separately) P/N: 1639192-1 (package of two)
• Fits standard TIA 19-inch racks
2U, 3U and 4U Enclosures feature:
• Removable front and rear covers for easy access and installation
• Front and rear fiber/cable management rings
• Edge guard on front cable entries for cable assembly protection
• Forward, flush or recessed mounting
• Fits standard TIA 19” and 23” racks
• Standard Cable Enclosure includes cable strain relief
• Enclosures shown loaded for reference only
Figure A
Figure B
Figure C
ORDERING INFORMATION
Height
1U (1.75")
2U (3.50")
3U (5.25")
4U (7.00")
Compatible
Racks
19"
19" or 23"
19" or 23"
19" or 23"
Capacity
Adapter Plates Cassettes
8
12
3
4
3
4
8
12
Recommended Cable Types
Standard
Standard
Standard
Standard
Figure D
Figure
A
B
C
D
Part Number
1-1657014-7
559542-2
559614-2
559552-2
Unloaded Rack Mount Patch Enclosure Fiber Densities
Enclosure Fully Loaded Density
6-Fiber Adapter
Plates
Fiber Density 18
1U Enclosures
2U Enclosures
Duplex Port Density
Fiber Density
Duplex Port Density
9
24
12
3U Enclosures
4U Enclosures
Fiber Density
Duplex Port Density
Fiber Density
Duplex Port Density
48
24
72
36
12-Fiber Adapter Plates or
MPO Cassettes
36
18
48
24
96
48
144
72
24-Fiber Adapter Plates or MPO Cassettes
72
36
96
48
192
96
288
144
1-81 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - RMG/AMP NETCONNECT
RMG/AMP NETCONNECT Adapter Packs
ORDERING INFORMATION
Description Equivalent To
Part Number
OM1/OM2 Multimode adapter only packs
LC adapters, beige color
12 duplex adapters or 24 fiber per adapter pack
LC adapters, beige color
6 adapters or 12 fiber per adapter pack
SC duplex adapters, beige color
6 adapters or 12 fiber per adapter pack
SC adapters, beige color
6 adapters or 6 fiber ports per adapter pack
ST adapters
6 adapters or 6 fiber ports per adapter pack
OM3/OM4 multimode adapter only packs 1
LC adapters, aqua color
12 duplex adapters or 24 fiber per adapter pack
LC adapters, aqua color
6 adapters or 12 fiber per adapter pack
SC duplex adapters, aqua color
6 adapters or 12 fiber per adapter pack
SC adapters, aqua color
6 adapters or 6 fiber ports per adapter pack
Singlemode (UPC) adapter only packs
LC UPC adapters, blue color
12 duplex adapters or 24 fiber per adapter pack
LC UPC adapters, blue color
6 adapters or 12 fiber per adapter pack
SC UPC duplex adapters, blue color
6 adapters or 12 fiber per adapter pack
SC UPC adapters, blue color
6 adapters or 6 fiber ports per adapter pack
ST UPC adapters
6 adapters or 6 fiber ports per adapter pack
1 TE recommends the use of aqua colored adapters with laser-optimized multimode fiber for 10 Gigabit applications for circuit identification.
RMG-24ADPQ3
RMG-12ADPQ1
RMG-12ADPC3
RMG-06ADPC1
RMG-06ADPT1
RMG-24ADPQ4
RMG-12ADPQ2
RMG-12ADPC4
RMG-06ADPC2
RMG-24ADPQ8
RMG-12ADPQ5
RMG-12ADPC8
RMG-06ADPC7
RMG-06ADPT2
1435516-5
1374463-5
559596-6
559558-6
1435516-1
1374463-1
559596-2
559558-2
559515-2
Part Number
1435516-2
1374463-2
559596-1
559558-1
559557-1
1-82 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - RMG/AMP NETCONNECT
Custom Modular Adapter Packs
TE’s RMG/AMP NETCONNECT modular adapter pack assemblies can be used in any of the RMG/AMP
NETCONNECT series fiber enclosures in a variety of connector styles and with or without preterminated
3 m (9.84') pigtails. Its modular design is user friendly and easy to install. Use the following matrix to configure the correct catalog number for the application. If the resulting catalog number is not on the standard list, the product is considered custom and may have longer lead times.
FEATURES
• Can be ordered with all standard types of duplex multimode and singlemode adapters
• Available with preterminated 3 m (9.84') pigtails to reduce installation time and cost
• One end of pigtail terminated to chosen connector style and installed into adapter pack plug-in adapters
Part Number
RMG-__ ADP__ __ __ __
Number of Adapters
12
24
6 duplex adapters
6 quad adapters
Connector Style
Multimode Connectors
C3 SC duplex
C4 SC duplex (aqua) 2
Q1 LC 1
Q2 LC (aqua) 1, 2
Q3 Quad LC
Q4 Quad LC (aqua) 2
Singlemode Connectors
C8 SC UPC duplex
Q5
Q8
LC UPC 1
LC UPC quad
Pigtail Length
LEAVE
BLANK
03
Adapters only
3 meter pigtails
Pigtail Type
LEAVE
BLANK
B
E
Adapters only
Singlemode stranded
Multimode stranded
Fiber Size
LEAVE
BLANK
D
F
S
Adapters only
OM3 – 50/125 LOMMF 300 m
OM4 - 50/125 LOMMF 550 m
Singlemode
1 LC adapters terminate two fibers at each adapter and should be considered duplex adapters in this ordering scheme
2 TE recommends the use of aqua colored adapters with laser optimized multimode fiber applications for 10 Gigabit circuit identification.
1-83 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - RMG/AMP NETCONNECT
RMG/AMP NETCONNECT Plug-and-Play Cassettes*
ORDERING INFORMATION
Description Fiber Type
OM1
OM1
OM2
Fiber Count
12
24
12
Polarity
Straight
Flipped
Straight
Flipped
Straight
Flipped
Straight
Equivalent To Part Number
1938059-1
1918781-1
1938970-1
1918782-1
1938057-1
1918779-1
1938968-1
LC
OM2
OM3
OM3
OM4
OM4
24
12
24
12
24
Flipped
Straight
Flipped
Straight
Flipped
Straight
Flipped
Straight
Flipped
Straight
RMG-12MPODQ4
1918780-1
1938058-1
1918783-1
RMG-24MPODQ4 1938969-1
1918784-1
RMG-12MPOFQ4 2193006-1
1553448-1
RMG-24MPOFQ4 2193236-1
RMG-12MPOSQ8
1553449-1
1938060-1
SM
SM
OM1
12
24
Flipped
Straight
Flipped
Straight
Flipped
1938056-1
RMG-24MPOSQ8 1938971-1
1918786-1
6435180-1
6435180-2
SC
OM2
12
Straight
Flipped
Straight
6435181-1
6435181-2
6754333-1
OM3
Flipped
Straight
6754333-2
6435069-1
SM
OM1
Flipped
Straight
Flipped
6435069-2
6278418-1
6278418-2
ST
OM2
12
Straight
Flipped
6435067-1
6435067-2
MPOptimate Performance; (Max Insertion Loss of each cassette is .35dB when tested at 850nm)
LC
OM3
OM3
12
24
Straight
Flipped
Straight
Flipped
1920753-1
1-1920753-1
1920698-1
1-1920698-1
*Note:
Cassettes come in various options of: Fiber count – 12 or 24 fibers
Fiber Types – OM1, OM2, OM3, OM4, SM
Polarity – straight or flipped
Front-facing connector – LC, SC or ST
See drawings for specifics of any particular part number at: www.te.com/Enterprise
1-84 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
LC Duplex, 24-fiber
MPO Cassette
Fiber
Fiber Enclosures - RMG/AMP NETCONNECT
Wall Mount Patch Enclosures
• Accept snap-in adapter plates or
MPO cassettes as listed (plates and cassettes sold separately)
• Top and bottom cable entries feature integral rubber cable grommets
• Reversible cable strain relief bracket
• Internal cable management
• Fiber loop storage and management
• Recessed, easy-to-use door latches
• Designed for indoor use
• Enclosure 1278323:
– Designed for use in protected areas
– Allows access to adapter ports even when door closed
– Optional lock package for added security
– Nominal dimensions:
8" (20 cm) H x 4" (10 cm)
D x 8" (20 cm) W
• Enclosure 559561:
– Optional lock package for added security
– Nominal dimensions:
8" (20 cm) H x 4" (10 cm)
D x 8" (20 cm) W
• Enclosure 1435128:
– MPO Cassettes in top two slots only
– Integral hasp for use with off-the-shelf padlocks
– Nominal dimensions:
12" (30.5 cm) H x 3" (7.6 cm) D x 12" (30.5 cm) W
• Enclosure 1278755:
– Reversible cable strain relief bracket
– Can house one splice holder (1374526)
– Optional lock package for added security
– Knockout ports for cable glands or grommets
– Nominal dimensions:
16.5" (40 cm) H x 14" (35.5 cm) D x 5" (13 cm) W
• Splice tray holder 1374526:
– Holds up to four splice trays
– Can mix and match splice trays
– Splice trays hold up to 12 splices
– Black anodized aluminum construction for durability and improved fiber visibility
– Each splice tray includes clear plastic cover, end caps for fiber retention, and appropriate splice holders
• Enclosures shown loaded for reference only
ORDERING INFORMATION
Description
Adapter Plate/Cassette
Capacity
2
Number of
Doors
1 No Optional Components
Wall Mount
Patch
Enclosures
2
4/2
4
2
1
2
No Optional Components
No Optional Components
No Optional Components
6/– 2 with Cable Glands, Cable Grommets and one Splice Tray Holder (1374526)
Optional Lock (For Use With 1278323, 559560, 559561 and 1278755)
Replacement Cable Grommets (For Use With 1278323, 559560, 559561 and 1278755)
Splice Tray Holder (for use with 1278755)
1-85 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Figure A
Figure B
Figure C
Figure D
Figure E
Figure F
Figure Part Number
A 1278323-2
B
C
D
559560-2
1435128-1
559561-2
E
F
1278755-4
559501-2
559496-2
1374526-1
Fiber
Fiber Enclosures - RMG/AMP NETCONNECT
Enclosure
1278323
559560
559561
1435128
1278755
Wall Mount Patch Enclosures Fiber Densities
Fully Loaded Density
Fiber Density
Duplex Port Density
Fiber Density
Duplex Port Density
Fiber Density
Duplex Port Density
Fiber Density
Duplex Port Density
Fiber Density
Duplex Port Density
12
24
12
36
18
6-Fiber Adapter Plates
12
6
12
6
24
12-Fiber Adapter
Plates/MPO Cassettes
24
12
24
12
48
24
48/24
24/12
72/–
36/–
24-Fiber Adapter
Plates/MPO Cassettes
48
24
48
24
96
48
96/48
48/24
144/–
72/–
1-86 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures – Core Vertical Switch Management (VSM)
Core Vertical Switch Management (VSM)
The Core Vertical Switch Management (VSM) platform is an application-driven solution for the unique cabling challenges presented by vertical blade-based core switch systems.
This modular system is designed to efficiently and effectively support deployment of cabling on the front of a Cisco 7010 series chassis.
FEATURES
Cabling routes directly from switch ports to patch panels above the switch – Frees up space at the sides of the mounting rails for other cabling, more effective air flow and hand access.
Logical representation of the switch ports and ease of access – The vertical patch management allows the cabling to be deployed neatly and in the same plane as the blade and port presentation. Patch fields in line with the switch ports simplify installation, MACs, documentation and troubleshooting.
Single patch cord lengths – Simplifies Day 2 activities and reduces inventory.
Simplified blade changeover – Blades and cabling can be preconfigured away from the switch, dramatically lowering changeover times and the corresponding outages, while greatly reducing patching errors.
Robust design – Provides the durability you expect with expanded hand access.
Designed to support UCP – Quick-Fit cassettes and modules allow a mix of copper and fiber in the same panel.
Supports mixed media applications and migration from fiber to copper in the same chassis.
1-87 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures – Core Vertical Switch Management (VSM)
Rack Mount Quick-Fit Panel
FEATURES
• Accepts up to 9 Quick-Fit modules
• Including cable support bars with tie down options
• Designed to support UCP Quick-Fit cassettes and modules allow a mix of copper and fiber in the same panel
Color: Black and galvanized finish
Rack Mount Quick-Fit Panel
ORDERING INFORMATION
Description
Rack Mount Quick-Fit Panel
Part Number
0-1671907-1
Panel with UCP QuickFit modules
Cable Management Tray
FEATURES
• Optimized to replace Cisco Nexus 7010 switch cable manager
• Provides vertical patch cord guiding
• Allows re-use of management front cover
Color: Black
ORDERING INFORMATION
Description
Cable Management Tray for Cisco Nexus 7010
Part Number
1671633-1
1-88 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures – Core Vertical Switch Management (VSM)
MRJ21 XG Quick-Fit Cassette 8 Port (10 Gb/s)
FEATURES
• Optimized for use in combination with UCP patch panels: plug-andplay deployment
• Compatible with MRJ21 XG cable assemblies for 10 GbE performance
• Front side: 8 x RJ45 jack (2 rows of 4 jacks)
• Rear side: 2 x MRJ21 receptacle
• Factory terminated and tested solution
• NOTE: The MRJ21 XG System for 10 Gb/s is not backwards compatible to the MRJ21 1 Gb/s solution!
ORDERING INFORMATION
Description
MRJ21 XG Quick-Fit cassette for 10GBase-T
Part Number
2153115-1
MRJ21 Quick-Fit Cassette 12 port (1 Gb/s)
FEATURES
• Pre-terminated Quick-Fit cassette
• High Performance TP Cabling for guaranteed application performance
• High-density, small form factor connectivity
• Modular solution
ORDERING INFORMATION
Description
MRJ21 Quick-Fit cassette for 1000Base-T
Part Number
1711970-1
1-89 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures – Core Vertical Switch Management (VSM)
CAT6A F/UTP Cable Assembly
FEATURES
• Meets or exceeds the channel specifications of ANSI/TIA-568-C.2 Category
• 6A shielded and Amendment 1 to ISO/IED 11801:2002 Class EA up to 500 MHz when used as a component in a properly installed TE F/UTP channel
• Meets or exceeds all requirements for IEEE 802.3an 10 GbE
• Clear, flexible, strain relief boot maintains proper bend radius to ensure peak performance
• Non-plenum (CM rated)
• 4-Pair stranded shielded conductors
• Universal wiring (T568A/T568B)
• RoHS compliant
ORDERING INFORMATION
Description
CAT6A Shielded Cable Assemblies
Part Number
TCPC-6ARFVB-WTYYF*
CAT5E U/UTP Cable Assembly
FEATURES
• Meets and exceeds ANSI/TIA performance requirements for CAT5E
• 4 pair stranded UTP cable
• Slim profile clear plug and boot
• Universal wiring
ORDERING INFORMATION
Description Part Number
Patch cord RJ45 CAT5E UTP, White TCPC-5ERUVA-WTYYF*
*YY- Denotes footage. More color options are available. Contact TE Customer Service.
1-90 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures – Core Vertical Switch Management (VSM)
MRJ21 XG to MRJ21 XG cable assemblies (10 Gb/s shielded)
FEATURES
• Friendly field installable 10 GbE solution
• Factory terminated and 100% tested solution
• Dense double blade connector with offset jackscrews for latching
• 16 pair shielded cable with AWG 26 solid conductors
Color: White
ORDERING INFORMATION
Description
MRJ21 XG to MRJ21 XG, 10 Gb/s, 180°–180° back shell; CMR
MRJ21 XG to MRJ21 XG, 10 Gb/s, 180°–45° back shell; CMR
Part Number
(Y-0000000-X)
2111521-X
2111522-X
Y- -X
0- -3
0- -5
1- -0
1- -5
2- -0
2- -5
3- -0
3- -5
4- -0
Length
3 m
5 m
10 m
15 m
20 m
25 m
30 m
35 m
40 m
MRJ21 to MRJ21 cable assemblies (1 Gb/s)
FEATURES
• Field installable 1 GbE solution
• Enhanced screening and improved EMC
• Factory terminated and 100% tested solution
• Dense double blade connector with offset jackscrews for latching
• 1.5 to 4 times the port density of 2 x 6 Stacked Mod Jack (RJ-45)
• 24 pair unshielded cable with AWG 24 solid conductors
Color: Gray
ORDERING INFORMATION
Description
MRJ21 to MRJ21, 1 Gb/s, 180°–180° back shell; straight to straight
MRJ21 to MRJ21, 1 Gb/s, 180°–45° back shell; straight to angled
MRJ21 180°
Back Shell
Part Number
(Y-0000000-X)
2111366-X
2111371-X
MRJ21 45°
Back Shell
Y- -X Length
0- -5 5 m
1- -0
1- -5
2- -0
2- -5
3- -0
3- -5
4- -0
5- -0
10 m
15 m
20 m
25 m
30 m
35 m
40 m
50 m
1-91 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures – Core Vertical Switch Management (VSM)
MPOptimate to LC Quick-Fit cassettes
FEATURES
• Pre-terminated low loss cassettes
• Front: 6 duplex LC (12 fiber) or 6 Quad receptacles (24 fiber) LC
• Back: 1 or 2 low loss MPOptimate connector(s)
• Available in straight or flipped pair version
• Optical performance for OM3/OM4:
IL ≤ 0.35 dB/cassette (max.)
RL ≥ 27 dB
• Port number labeling and additional label strip included
ORDERING INFORMATION
Description
1 x MPOptimate to 6 x LC Duplex (12 fiber); OM4 XGA 10 Gb/s
1 x MPOptimate to 6 x LC Duplex (12 fiber); OM3 XG 10 Gb/s
2 x MPOptimate to 6 x LC Quad (24 fiber); OM4 XGA 10 Gb/s
2 x MPOptimate to 6 x LC Quad (24 fiber); OM3 XG 10 Gb/s
Pairs straight
Part Number
1671226-5
1671226-3
1671227-5
1671227-3
MPOptimate coupler Quick-Fit module
FEATURES
• Quick-Fit module with 6 or 12 MPO couplers (supporting 72 to 288 fibers
• Port number labeling and additional label strip included
• Cable assemblies at rear of panel should be non-pinned
Color: Black
ORDERING INFORMATION
Description
6 x MPO coupler module
12 x MPO coupler module
Pairs flipped
Part Number
1-1671226-5
1-1671226-3
1-1671227-5
1-1671227-3
Part Number
1671200-1
1711987-1
1-92 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures – Core Vertical Switch Management (VSM)
MPOptimate LC patch cords
FEATURES
• Patch cords with optimized LC connectors
• Cable performance: OM4 or OM3 XG 10 Gb/s
ORDERING INFORMATION
Description
OM3 and OM4 (50/125
LC cable assemblies
μm) multimode
Singlemode LC cable assemblies
OM3 2.0 mm zipcord LC-LC connectors
OM4 2.0 mm zipcord LC-LC connectors
OS2 2.0 mm zipcord LC-LC connectors
Note: XXX=length in meters, three digits required (example: 40 meters is 040).
MPOptimate pre-terminated trunks
FEATURES
• Pulling socks and stealth pulling eye protect MPO connectors during installation
Color: Aqua
Part Number
PAT-3C3C-P30CxxxM
PAT-3C3C-P40CxxxM
PAT-LCLC-PS0CxxxM
ORDERING INFORMATION
MPO Trunk Assemblies
OM4 MPO Trunk Assemblies
OM4 MPO-MPO, 12-fiber 3 mm interconnect, plenum (OFNP) rated
OM4 MPO-MPO, 24-fiber backbone (2x12) with 3 mm interconnect subunits, OFNP/OFNP
OM3 MPO Trunk Assemblies
OM3 MPO-MPO, 12-fiber 3 mm interconnect, plenum (OFNP) rated
OM3 MPO-MPO, 24-fiber backbone (2 x 12) with 3 mm interconnect subunits, OFNR/OFNP
Singlemode Trunk Assemblies
OS2 Singlemode, 12-fiber, 12-fiber 3 mm interconnect, plenum (OFNP) rated
OS2 Singlemode, 24-fiber, 24 (2 x 12) Fiber backbone with 3 mm interconnect subunits, plenum (OFNP) rated
Note: XXX=length in feet, three digits required (example: 40 feet is 040).
Part Number
MPT-NCNCJ40xxxF-FF
MPT-NCNCD40xxxF-FF
MPT-NCNCJ30xxxF-FF
MPT-NCNCD30xxxF-FF
MPA-NCNCJ50xxxF-FF
MPA-NCNCD50xxxF-FF
MPOptimate patch cords
FEATURES
• Connector performance: IL ≤ 0.35 dB (max.); RL ≥ 28 dB
• Available in female/female and male/female version in straight and total flipped wiring
• Additional configurations are available, please see specification 402-1008 on www.te.com/Enterprise
Color: Aqua
ORDERING INFORMATION
Description
12-Fiber MPO Patch Cord, Polarity A (Type A)
Part Number
MPT-NCNCJ40xxxM-NN
Note: XXX=length in meters, three digits required (example: 40 meters is 040).
1-93 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - Optical Distribution Frame Solutions
Fiber Enclosures – Optical Distribution Frame Solutions
TIA-942 presents the cross-connect architecture as the best practice for Main Distribution
Area (MDA). Utilizing a centralized cross-connect frame allows maintenance to be performed without disrupting the cables attached to active equipment. All moves, adds and changes can be performed on the passive cross-connect frame. The benefits of deploying a cross-connect architecture in the MDA include: lower operating costs, enhanced reliability, and a reduced risk of downtime due to poor fiber jumper management.
Frames
TE developed its innovative Optical Distribution Frame (ODF) for high-fiber count applications.
At 2304 terminations in a single frame, its unique, user-friendly design and superior cable management provide enterprise customers an optimum solution to handle applications with high fiber counts such as data centers.
TE’s ODF product line is designed to fit a variety of termination, splice, and storage applications.
This frame is designed with an emphasis on superior cable management and ease of use, including features such as ample trough space for cable and jumpers, easy access to connectors, and storage for jumpers. The frame sections are shipped from the factory fully equipped with all cable management hardware including a built-in jumper storage panel.
Fiber Termination Blocks (FTBs)
Fiber Termination Blocks (FTBs) are available with SC adapters in block configurations of
144-positions, and with LC adapters in 144- and 192-positions. FTBs utilize sliding adapter packs to gain easy access to both the front and rear connectors. FTBs can be ordered with adapters only, with factory terminated IFC stubs, or as plug-and-play cassettes.
Sliding Adapter Packs
Sliding adapter packs house groups of fiber optic adapters and are mounted in fiber termination blocks to provide easy access to connectors. Sliding adapter packs are available with SC and LC adapters. The adapters come in packs of four and six depending on the adapter type and the desired termination density.
1-94 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - Optical Distribution Frame Solutions
FEATURES
Ample Trough Space
• Reduces jumper pile-up and congestion
– Reduces maintenance time due to easy removal and tracing of jumpers
– Minimizes risk of microbends or damage to fiber
Built-in Jumper Storage Panel
• Minimizes number of required jumper lengths
• Maintains fiber bend radius
• Simplifies frame installation
– Saves money by reducing the number of different jumper lengths that have to be kept in inventory
– Minimizes risk of microbends or damage to fiber
• Enclosed system ensures easy cable access without fiber cross-over points
Sliding Adapter Packs
• Promotes high density
• Provides easy access to connectors
– Saves valuable floor space
– Reduces time required for operations and maintenance
Intelligent Cable Routing System
• No fiber cross-over points
• Multiple vertical troughways
– Reduces maintenance time due to easier removal and tracing of jumpers and minimizes fiber “weaving”
Bend Radius Protection at Every Turn
• ODF provides complete bend radius at every turn to ensure network performance and reliability
1-95 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber Main Distribution Frame
(FMDF)
The FMDF is the cornerstone of the
ODF product line. This innovative frame has six 5" horizontal troughs for a total of 30" of horizontal trough space. This abundant trough space minimizes fiber pile up and congestion leading to easier moves, adds and changes. The frame has twelve Fiber Termination
Block (FTB) mounting positions equally divided between vertical columns on the left and right sides of the frame as shown in the figure here. The frame is available in 30" wide version and provides additional vertical trough space for the highest termination density applications. The built-in jumper storage panel will store up to 3.5 m (12') of jumper slack.
7’
(2.14 m)
24”
(61 cm)
30”
(76.2 cm)
FMDF Frame
NGFB-MDF7A144-30
Isolation Pad shown with FMDF
NGF-ACCISOP30X24
ORDERING INFORMATION
Description
Fiber Main Distribution Frame (FMDF)
Accommodates 12 Fiber Termination Blocks (FTBs) or 12
Plug-and-Play Cassette Blocks
Short Bracket 30" Frame
For use with SC 144-position FTBs, or LC 192-position FTBs,
LC 144- and 192-position
Plug-and-Play Cassette Blocks 1
Long Bracket 30" Frame
For use with LC 144-position FTBs
Dimensions (HxWxD)
7' x 30" x 24"
(2.14 m x 76.2 cm x 61 cm)
Part Number
NGFB-MDF7A144-30
NGFB-MDF7A100-30
Each frame section includes heavy duty floor anchor bolts for concrete floor applications. Note: TE recommends the use of 1.7 mm/1.6 mm jumpers when deploying 192-position FTBs.
1-96 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - Optical Distribution Frame Solutions
Fiber Optic Terminal Patch Cord Storage Panel
The fiber optic terminal patch cord storage panel is an optional filler panel that provides up to 5 m (16.4') of slack storage for patch cords that run between terminal equipment and the rear ports of an ODF terminal block in cross-connect applications. This slack storage capability allows for greater flexibility in determining patch cord lengths and allows for use of more standard length patch cords. This panel is installed within the ODF frame lineup between ODF frames.
The fiber optic terminal storage panels are available in two different configurations depending on the way the ODF frame system is zoned. ODF frames can be zoned by vertical or by frame. A 12" wide panel is available that serves two verticals (one on each side) for use when frames are zoned by vertical. Also, 8" wide versions are available that serve a single vertical (left or right) for use when frames are zoned by frame.
7'
(2.14 m)
24"
(61 cm) 12"
(30.5 cm)
Fiber Optic Terminal Storage Panel
NGFB-ACCFOTSB
Isolation Pad shown with FOTSB
NGF-ACCISOPFS12X24
ORDERING INFORMATION
Description
Fiber Optic Terminal Patch Cord Storage Panel
Use with FMDF frame
Color: black
Isolation Pad - Storage Panel
A template for frame installation providing isolation between the frame and the ground
Dimensions (HxWxD)
7' x 12" x 24"
(2.14 m x 30.5 cm x 61 cm)
Part Number
NGFB-ACCFOTSB
NGF-ACCISOPFS12X24
Note: When using the Fiber Optic Terminal Storage Panels, a cable exit UP block must be used.
1-97 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - Optical Distribution Frame Solutions
End Guard
End guards provide protection for the fibers entering and exiting frames at the end of a lineup. They are designed for universal fit to be used on either end of the lineup.
24" (61 cm)
7' (2.14 m)
5" (12.7 cm)
ODF Frame
NGFB-MDF7A144-30
End Guard
NGFB-ACCEGD007
ORDERING INFORMATION
Description
End Guard
Use with FMDF frames
Color: black
Isolation Pad - End Guard
A template for frame installation providing isolation between the frame and the ground
Dimensions (HxWxD)
7' x 5" x 24"
(2.14 m x 12.7 cm x 61 cm)
Part Number
NGFB-ACCEGD007
NGF-ACCISOPEG24
Isolation Pad shown with End Guard
NGF-ACCISOPEG24
1-98 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - Optical Distribution Frame Solutions
Preterminated Fiber
Termination Blocks
Arrive from the Factory with Either IFC or OSP
Cables
Fiber Cable Easily Uncoils
During Installation
Fiber Termination Block
Ships Inside the Drum
IFC Cables
Loaded into FTB
Configuration Information
Fiber Termination Blocks (FTB) are available with factory terminated indoor rated cable (IFC) in ribbon or stranded configurations. All blocks are 100% factory tested to guarantee continuity and reliable connections. Factory terminated FTBs make installation quick and easy, reducing labor costs. Before ordering, determine the block orientation and cable exit direction. Factory terminated FTBs may be ordered with a “left” orientation (mounts on the left side of the frame) or a “right” orientation (mounts on the right side of the frame). The cable exit direction will be either “upward” (cables terminated to the rear side of the block exit up toward the top of the frame) or “downward” (cables terminated to the rear side of the block exit down toward the bottom of the frame).
Definition of Variables
1
2
3
4
5
6
7
8
Block Style General adapter type required in the FTB
Block Configuration
Maximum number of terminations that the FTB will accommodate when fully loaded
Block Orientation
Vertical column of the frame the FTB is to be mounted on
Cable Exit Direction
Direction the equipment patch cords or IFC cable will exit from the FTB
Adapter/Connector #1
Specific adapter/connector type required in the FTB. Refers to the adapter/connector type at the FTB
Connector #2
Specific connector type required at the cable end opposite the FTB
Cable Type
Type of cable to be terminated to the FTB
Cable Length
Required length of the cable terminated to the FTB
1-99 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - Optical Distribution Frame Solutions
SC style FTB's with Factory Terminated Stubs 144-position Block
Part Number
NGFB-TB1M __ __ __ __ __ __ __ __ __
3 Block Orientation
L
R
Left
Right
4 Cable Exit Direction
U
D
Upward
Downward
5 Connector and Adapter Type #1
Singlemode
7 SC ultra polish
Multimode
9 SC
T SC aqua (10 G) 1
6 Connector Type #2
Singlemode
0
9
0
7
No connector/stub end
SC ultra polish
Multimode
No connector/stub end
SC
8 Cable Length
Standard Single-Ended
016 16 m (50')
023 23 m (75')
031 31 m (100')
046 46 m (150')
061 61 m (200')
077 77 m (250')
092 92 m (300')
122 122 m (400')
153 153 m (500')
Non-Standard
Use XXX for non-standard length in meters
7 Cable Type (IFC Riser) 2
Singlemode
ZD
FJ
144-fiber stranded
144-fiber ribbon
62.5/125 µm Multimode Fiber
YM 144-fiber stranded
50/125 µm Multimode Fiber
VZ 144-fiber stranded
50/125 µm LOMMF 300 m Multimode Fiber
WG 144-fiber stranded
10 Gigabit circuits.
TE provides GR-409 compliant cable that meets or exceeds our high quality standards. Standard cable offering above will use Corning SMF28-e, Sumitomo, Alcatel or similar singlemode fiber based on current market availability.
See previous page for definition of variables.
Other configurations are available upon request. Please contact TE Technical Assistance Center.
1-100 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - Optical Distribution Frame Solutions
LC Style FTBs with Factory Terminated Stubs
Part Number
NGFB-TB4 __ __ __ __ __ __ __ __ __ __
2
Block Capacity
M
Q
144
192
3 Block Orientation
L
R
Left
Right
4
5
6
Cable Exit Direction
U Upward
D Downward
Connector and Adapter Type #1
Singlemode
K LC ultra polish
Multimode
P
C
LC
LC aqua (10G) 1
Connector Type #2
Singlemode
0
K
No connector/stub end
LC ultra polish
Multimode
0 No connector/stub end
P LC
8 Cable Length
Standard Single-Ended
016
023
031
16 m (50')
23 m (75')
31 m (100')
046 46 m (150')
061 61 m (200')
077 77 m (250')
092
122
153
92 m (300')
122 m (400')
153 m (500')
Non-Standard
Use XXX for non-standard length in meters
7 Cable Type (IFC Riser) 2
Singlemode
ZD 144-fiber stranded
GT
FJ
192-fiber stranded (2 x 96)
144-fiber ribbon
HK 192-fiber ribbon
62.5/125 µm Multimode Fiber
YM 144-fiber stranded
MR 192-fiber stranded (2 x 96)
50/125 µm Multimode Fiber
VZ 144-fiber stranded
JM 192-fiber stranded (2 x 96)
50/125 µm LOMMF 300 m Multimode Fiber
WG 144-fiber stranded
TF 192-fiber stranded (2 x 96)
10 Gigabit circuits.
TE provides GR-409 compliant cable that meets or exceeds our high quality standards. Standard cable offering above will use Corning SMF28-e, Sumitomo, Alcatel or similar singlemode fiber based on current market availability.
See previous page for definition of variables.
Other configurations are available upon request. Please contact TE Technical Assistance Center.
1-101 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - Optical Distribution Frame Solutions
Fiber Termination Blocks (FTBs) – Unterminated (Adapter Only)
FTBs without fiber can be ordered fully loaded with adapters. Before ordering, determine the block orientation and cable exit direction. Unterminated FTBs may be ordered with a “left” orientation (mounts on the left side of the frame) or a
“right” orientation (mounts on the right side of the frame). The cable exit direction will be either “upward”* (cables terminated to the rear side of the block exit up toward the top of the frame) or “downward” (cables terminated to the rear side of the block exit down toward the bottom of the frame). All blocks with adapters only are configured to terminate single or dual jumpers on the rear of the block. If a multifiber breakout style cable (i.e., OSP/IFC) is to be terminated to the rear of the block, a separate clamping kit and replacement rear storage area kit is required
(see next page). FTBs cannot be ordered with a combination of singlemode and multimode adapters. If this combination is desired, TE recommends purchasing a fully loaded adapter only termination block, and separate sliding adapter packs to customize the block on-site.
*Note: When using the Fiber Optic Terminal Storage Panels, a cable exit UP block must be used.
144-Position Right Upward
FTB Shown
1-102 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - Optical Distribution Frame Solutions
Fiber Termination Blocks (FTBs) – Unterminated (Adapter Only)
ORDERING INFORMATION
Description
144-position Blocks
Multimode LC
LC (beige) adapters; cable exit up; RIGHT block orientation
LC (beige) adapters; cable exit up; LEFT block orientation
LC (beige) adapters; cable exit down; RIGHT block orientation
LC (beige) adapters; cable exit down; LEFT block orientation
Multimode SC
SC (beige) adapters; cable exit up; RIGHT block orientation
SC (beige) adapter; cable exit up; LEFT block orientation
SC (beige) adapters; cable exit down; RIGHT block orientation
SC (beige) adapters; cable exit down; LEFT block orientation
10G Multimode LC 1
LC (aqua) adapters with zirconia sleeves; cable exit up; RIGHT block orientation
LC (aqua) adapters with zirconia sleeves; cable exit up; LEFT block orientation
LC (aqua) adapters with zirconia sleeves; cable exit down; RIGHT block orientation
LC (aqua) adapters with zirconia sleeves; cable exit down; LEFT block orientation
10G Multimode SC
SC (aqua) adapters with zirconia sleeves; cable exit up; RIGHT block orientation
SC (aqua) adapters with zirconia sleeves; cable exit up; LEFT block orientation
SC (aqua) adapters with zirconia sleeves; cable exit down; RIGHT block orientation
SC (aqua) adapters with zirconia sleeves; cable exit down; LEFT block orientation
Singlemode LC
LC (blue) adapters with zirconia sleeves; cable exit up; RIGHT block orientation
LC (blue) adapters with zirconia sleeves; cable exit up; LEFT block orientation
LC (blue) adapters with zirconia sleeves; cable exit down; RIGHT block orientation
LC (blue) adapters with zirconia sleeves; cable exit down; LEFT block orientation
Singlemode SC
SC (blue) adapters with zirconia sleeves; cable exit up; RIGHT block orientation
SC (blue) adapters with zirconia sleeves; cable exit up; LEFT block orientation
SC (blue) adapters with zirconia sleeves; cable exit down; RIGHT block orientation
SC (blue) adapters with zirconia sleeves; cable exit down; LEFT block orientation
Part Number
NGFB-TB4MRUP
NGFB-TB4MLUP
NGFB-TB4MRDP
NGFB-TB4MLDP
NGFB-TB1MRU9
NGFB-TB1MLU9
NGFB-TB1MRD9
NGFB-TB1MLD9
NGFB-TB4MRUC
NGFB-TB4MLUC
NGFB-TB4MRDC
NGFB-TB4MLDC
NGFB-TB1MRUT
NGFB-TB1MLUT
NGFB-TB1MRDT
NGFB-TB1MLDT
NGFB-TB4QRUK
NGFB-TB4QLUK
NGFB-TB4QRDK
NGFB-TB4QLDK
NGFB-TB1MRU7
NGFB-TB1MLU7
NGFB-TB1MRD7
NGFB-TB1MLD7
1 TE recommends the use of aqua colored adapters with laser optimized multimode fiber for identification of 10 Gigabit circuits.
1-103 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - Optical Distribution Frame Solutions
ORDERING INFORMATION, continued
Description
192-position Blocks
Multimode LC
LC (beige) adapters; cable exit up; RIGHT block orientation
LC (beige) adapters; cable exit up; LEFT block orientation
LC (beige) adapters; cable exit down; RIGHT block orientation
LC (beige) adapters; cable exit down; LEFT block orientation
10G Multimode LC 1
LC (aqua) adapters with zirconia sleeves; cable exit up; RIGHT block orientation
LC (aqua) adapters with zirconia sleeves; cable exit up; LEFT block orientation
LC (aqua) adapters with zirconia sleeves; cable exit down; RIGHT block orientation
LC (aqua) adapters with zirconia sleeves; cable exit down; LEFT block orientation
Singlemode LC
LC (blue) adapters with zirconia sleeves; cable exit up; RIGHT block orientation
LC (blue) adapters with zirconia sleeves; cable exit up; LEFT block orientation
LC (blue) adapters with zirconia sleeves; cable exit down; RIGHT block orientation
LC (blue) adapters with zirconia sleeves; cable exit down; LEFT block orientation
Part Number
NGFB-TB4QRUP
NGFB-TB4QLUP
NGFB-TB4QRDP
NGFB-TB4QLDP
NGFB-TB4QRUC
NGFB-TB4QLUC
NGFB-TB4QRDC
NGFB-TB4QLDC
NGFB-TB4QRUK
NGFB-TB4QLUK
NGFB-TB4QRDK
NGFB-TB4QLDK
1 TE recommends the use of aqua colored adapters with laser optimized multimode fiber for identification of 10 Gigabit circuits.
1-104 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - Optical Distribution Frame Solutions
Fiber Termination Blocks (FTBs)
CONFIGURATION INFORMATION
Definition of Variables
1
Block Style
General adapter type required in the FTB
2
3
4
5
Block Configuration
Maximum number of terminations that the FTB will accommodate when fully loaded
Block Orientation
Vertical column of the frame the FTB is to be mounted on
Cable Exit
Direction Direction the equipment jumpers or OSP cable will exit from the FTB
Adapter Type
Specific adapter type required in the FTB
Cable Clamping/Block Conversion Kits
Adapter-only blocks are configured to accommodate single fiber jumpers or multifiber breakout cables.
If loading a preterminated intrafacility (IFC) cable or a preterminated OSP cable is desired, additional hardware will be required. Block conversion kits are available to convert adapter only blocks to blocks that will accept preterminated IFC or OSP style cables. The conversion kits contain the cable management hardware, brackets and cable clamps required to convert the block. The kit required will depend on the block style originally purchased.
Protective
Cover
Fanout
Bracket
Cable
Clamp
72-Position Block
Loaded with Jumpers
ORDERING INFORMATION
Description
Block style originally purchased
144- or 192-position left up blocks
144- or 192-position right up blocks
144- or 192-position left down blocks
144- or 192-position right down blocks
72-Position Block
Loaded with Multifiber Breakout Cable
Part Number
NGFB-ACCRCMSLU
NGFB-ACCRCMSRU
NGFB-ACCRCMSLD
NGFB-ACCRCMSRD
72-Position Block with Clamping Kit
Rear Cable Management Tray for 144 Block Conversion Kit
1-105 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - Optical Distribution Frame Solutions
Sliding Adapter Packs
Sliding adapter packs house groups of fiber optic adapters and are mounted in Fiber Termination Blocks to provide easy access to connectors.
Sliding Adapter Packs are available with SC and LC adapters. The adapters come in packs of six and eight depending on the adapter type and the desired termination density. See table below for configuration guidelines.
ORDERING INFORMATION
Description
144-position Blocks
Multimode LC
Multimode SC
10G Multimode LC 1
10G Multimode SC 1
Singlemode LC
Singlemode SC
192-position Blocks
Multimode LC
10G Multimode LC 1
Singlemode LC
Part Number 1
NGF-SAPP0K00
NGF-SAP90K00
NGF-SAPC0K00
NGF-SAPT0K00
NGF-SAPK0K00
NGF-SAP70K00
NGF-SAPP0J00
NGF-SAPC0J00
NGF-SAPK0J0
SC pack
Style K
1 TE recommends the use of aqua colored adapters with laser optimized multimode fiber for 10 Gigabit circuit identification.
Note: TE recommends the use of 1.7 mm/1.6 mm jumpers when deploying 192-position FTBs.
LC pack 144-position
Style K
SLIDING ADAPTER PACK CONFIGURATION GUIDELINES SPECIFICATIONS
Block Configuration
144-Position (block code 'M')
192-Position (block code 'Q')
Adapter Type
SC, LC
LC
Adapter Pack Configuration Adapter Pack Option
6 Pack/6 Pack K
8 Pack/8 Pack J
1-106 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - Optical Distribution Frame Solutions
Data Center Optical Distribution Frame with Plug-and-Play Cassettes
TE’s data center optical distribution frame (ODF) with plug-and-play (MPO) cassettes is the highest density optical distribution frame solution available today. It efficiently manages up to 1,728 fiber terminations using the 144-position block in a single frame in either a cross-connect or inter-connect design.
Its patented design incorporates the fundamentals of cable management while using the industry’s highest fiber count MPO plug-and-play cassettes.
FEATURES
• Rapid installation of new deployments
• MPO trunks can enter rack from either under-floor or overhead
• Slack storage included in each rack allows for the use of a single jumper length
• On frame jumper routing provides bend radius and physical protection with slack easily and intuitively managed
APPLICATIONS
• Provides managed high-density solution for optical distribution frames in the main distribution area of the data center
• Can be successfully deployed in the cross-connect architecture recommended in TIA-942, and still provide clear, managed pathways for fiber
SPECIFICATIONS
MODULE LOSS (measured through MPO mated pair to LC adapter) 850 nm
INSERTION LOSS:
Maximum:
Typical:
0.7 dB
0.25 dB
RETURN LOSS:
Maximum: —
TRUNK LOSS (PER METER):
Maximum: .0035 dB
CHANNEL/LINK LOSS: with 31 m trunk (100')
Maximum:
Typical:
1.3085 dB
1310 nm
0.55 dB
0.25 dB
-55 dB
.001 dB
1.131 dB
0.6085 dB 0.531 dB
ENVIRONMENTAL CHARACTERISTICS
Storage Temperature:
Operating Temperature:
Installation Temperature:
-40° to 70° C (-40° to 158° F)
0° to 70° C (32° to 158° F)
0° to 70° C (32° to 158° F)
1-107 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - Optical Distribution Frame Solutions
Data Center Optical Distribution Frame with Plug-and-Play Cassettes Specifications
SPECIFICATIONS
Position #12
Position #144
Left Side
CONNECTION TABLE 144 POS
MPO CONECTOR TRAY
1-48 49-96
FIBER BUNDLE NUMBER
97-144
FIBER
COLOR
1 2 3 4 5 6 7
T/B POSITION
8 9 10 11 12
1 13 25 37 49 61 73 85 97 109 121 133 BLUE
2 14 26 38 50 62 74 86 98 110 122 134 ORANGE
3 15 27 39 51 63 75 87 99 111 123 135 GREEN
4 16 28 40 52 64 76 88 100 112 124 136 BROWN
5 17 29 41 53 65 77 89 101 113 125 137 SLATE
6 18 30 42 54 66 78 90 102 114 126 138 WHITE
7 19 31 43 55 67 79 91 103 115 127 139 RED
8 20 32 44 56 68 80 92 104 116 128 140 BLACK
9 21 33 45 57 69 81 93 105 117 129 141 YELLOW
10 22 34 46 58 70 82 94 106 118 130 142 VIOLET
11 23 35 47 59 71 83 95 107 119 131 143 ROSE
12 24 36 48 60 72 84 96 108 120 132 144 AQUA
Top View
Fiber Bundle/MPO Connector Locations
9
10
11
12
5
6
7
8
3
4
1
2
OPTICAL SPECIFICATIONS
MPO connector mated pairs
TFP Plug-and-Play Cassette
MPO connector mated pairs
TFP Plug-and-Play Cassette or
Optical Distribution Frame Plug-and-Play Block
LC Adapters
1-108 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Data Center Optical Distribution Frame with Plug-and-Play Cassettes
ORDERING INFORMATION
Description
144-position MPO – LC Blocks; Black
OM3 - 50/125 LOMMF 300m; 12 MPO to 144 LC (aqua) adapters
LEFT block orientation
RIGHT block orientation
OM4 - 50/125 LOMMF 550m; 12 MPO to 144 LC (aqua) adapters
LEFT block orientation
RIGHT block orientation
Singlemode – 12 MPO to 144 LC adapters
LEFT block orientation
RIGHT block orientation
192-position MPO – LC Blocks; Black
OM3 - 50/125 LOMMF 300m; 16 MPO to 192 LC (aqua) adapters
LEFT block orientation
RIGHT block orientation
OM4 - 50/125 LOMMF 550m; 16 MPO to 192 LC (aqua) adapters
LEFT block orientation
RIGHT block orientation
Singlemode; 16 MPO to 192 LCUPC (blue) adapters
LEFT block orientation
RIGHT block orientation
Rack
30" x 24" x 7 ft frame with shorter MPO block mounting brackets; black
Rack Accessories
ISO Pad
End Guard
End Guard ISO Pad
Rack Installation Kit Raised Floor
Catalog Number
NGFB-MPML0C112
NGFB-MPMR0C112
NGFB-MPML0C412
NGFB-MPMR0C412
NGFB-MPML0K512
NGFB-MPMR0K512
NGFB-MPQL0C116
NGFB-MPQR0C116
NGFB-MPQL0C416
NGFB-MPQR0C416
NGFB-MPQL0K516
NGFB-MPQR0K516
NGFB-MDF7A144-30
NGF-ACCISOP30X24
NGFB-ACCEGD007
NGF-ACCISOPEG24
FDF-ACC146
1-109 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - Optical Distribution Frame Solutions
Cable Clamp Kit
Cable clamp kits are available for securing IFC/OSP cable or equipment jumpers on the rear of the FTB.
Each FTB has three cable clamp mounting positions.
Cable clamp kit for active equipment patch cord includes:
• Cable clamp bracket
• O-ring
• Screws
1 each
1 each
2 each
Cable clamp kit for trunk cables includes:
• Clamp cover
• Clamps
1 each
2 each
• 0.5" Grommet (inner diameter) 1 each
• 0.6" Grommet (inner diameter) 1 each
• 0.7" Grommet (inner diameter) 1 each
• #14 - #6 AWG split bolt 1 each
• Shield bonding connector
• 1-foot lead wire
1 each
1 each
• #6 AWG ring terminal lug
• Clamp cover plate
1 each
1 each
ORDERING INFORMATION
Description Part Number
Cable clamp kit for equipment patch cords (included with fiber termination blocks loaded with adapters only) NGF-ACCCLMP04
Cable clamp kit* for trunk cables, dielectric cable without grounding hardware
(included with fiber termination blocks with IFC)
NGF-ACCCLMP08
* One NGF-ACCCLMP08 is also included with each cable clamp kit and block conversion kit
1-110 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - Optical Distribution Frame Solutions
Frame Installation Kit
Frame installation kits may be used on network frames and are seismic zone 4 rated.
Computer floor kit includes:
• Threaded rods 4 each,
• Heavy nuts, locks and flat washers 12 each
5 /
8
" – 11" x 30"
• Nuts with springs
• Unistrut and anchor kit
4 each, 1 /
2
1 each, 10'
" x 30" and shoulder washers
Overhead support kit includes:
• Designation card holder
• Two-bar channel
• Framing clip with 0.56
• Framing clip with 0.69
• Clip J-bolt
• Threaded rod
• Hex nut
• Hex nut
1 each
4 each
4 each
4 each
4 each, 1 /
2
2 each, 5
4 each, 5
" – 13" x 18" long
/
8
" x 18" long
4 each, 1 /
2
" x 13"
/
8
" x 11"
Standard Cross-Connect Patch Cord Lengths
SPECIFICATIONS
Total Number of
Sections Traversed 1
Same frame
Approximate
Patch Cord Length
Meters (Feet)
6 m (18')
Adjacent frames 7 m (23')
3 to 4
5 to 6
7 to 8
9 to 10
8 m (26')
10 m (33')
11 m (36')
12 m (39')
ORDERING INFORMATION
Description
Frame installation kit for computer floor
Part Number
FDF-ACC146
1
Overhead support RINST-TOP7
Depending on office requirements, 11 or more frame sections may require the use of interbay tie panels.
For additional information, please call TE Technical Assistance Center, 1-800-366-3891.
For recommended cross-connect method and installation instructions, refer to User Manual ADCP-90-285.
1-111 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - OMX
Fiber Enclosures – OMX Splice Cabinet
The data center splice cabinet is a highdensity splice solution, housing up to 1,440 splices within a 23.6" by 11.8" footprint.
Shipped complete with the necessary cable management, it features slots which secure and protect the round splice trays and can hold up to sixty 12-fiber splice trays on which the cables enter from above or below.
7'
(2.14 m)
ORDERING INFORMATION
Description
Fully Configured Splice Cabinet
Accommodates up to 1440 fiber splices
Cable enters from top
Color: black
Cabinet - Cable Exit Up
Cable enters from above
Color: black
Cabinet - Cable Exit Down
Cable enters from below
Color: black
Isolation Pad - Splice Cabinet
A template for cabinet installation providing isolation between the cabinet and the ground
24"
(61 cm)
OMX Splice Cabinet Doors
Open and Closed
MX6-BSPL-1440-U7
12"
(30.5 cm)
Isolation Pad shown with
OMX Cabinet
MX6-BAYTEMPLATE
Dimensions (HxWxD) Part Number
7’ x 24” x 12”
(2.14 m x 61 cm x 30.5 cm)
MX6-BSPL-1440-U7
MX6-BSPL-1440-D7
MX6-BAYTEMPLATE
1-112 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Enclosures - OMX
Splice Wheel
ORDERING INFORMATION
Description
Splice Wheel
Accommodates up to 24 fiber splices, heat shrink fusion chip
Accommodates 12 ribbon fusion splices
Part Number
FST-DRS24-NT
FST-DRS12-MT
Cable Clamps
ORDERING INFORMATION
Description
OMX Splice Frame Cable Clamps
For OSP Cable
For IFC Cable
Part Number
FEC-ACCCLMP01
MX6-SPLIFCCLMP
MX6-SPLIFCCLMP
FEC-ACCCLMP01
1-113 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Storage Area Management (SAN Fiber Channel Management)
Storage Area Management (SAN Fiber Channel Management)
TE Connectivity's Storage Area Management (SAM) solution for network infrastructures is designed to reduce the bulkiness of cabling in the data center by up to 80% and enable high-density deployment with fewer costly cabinet or infrastructure upgrades. SAM can help you save time, reduce costs, maximize efficiency and open up much needed space in your data center.
It takes the complexity out of cable management, and optimizes the performance of your data center floor space, racks and electronics.
FEATURES
• Reduce SAN switch cabling volume by up to 80%
• Implement high-density deployment with fewer cabinet or infrastructure upgrades
• Minimize footprint - no additional front vertical, side, or horizontal cable management devices
• Minimize cable mass and slack management using linecard-optimized hydra assemblies
• Speed up deployments and reduce connection errors with color-coded and keyed connections
More information on TE's SAM solution can be found at www.te.com/SAM
ORDERING INFORMATION
Product Description
Rack Mount Patch Enclosure, 2RU MPO Secure 1553761-1
Part Number
SAM Far End Enclosure, 1RU MPO to Quad LC 32-Port
XG OM3/OM4 (850 nm LO 50 μm) Multimode 1553533-2
Singlemode 1553657-2
48-Port
1553533-1
1553657-1
Five Simple Components
SAM Rack Mount Optical Fiber Enclosure
SAM MPO Hydra Cable Assemblies SAM Far End Enclosure
SAM Rack Mount Optical Fiber Enclosure
(Pro-E image)
1-114
SAM Hydra www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Q3000 SAM Blade
Fiber
Storage Area Management (SAN Fiber Channel Management)
Q3000 SAM Blades
FEATURES
• Replaces SAM Far End Enclosures
• Compatible with standard Q3000 frame
• Maintains port similarity with switches and SAM MPO linecard kits
• Each blade supports two SAM trunks
• 16 LC duplex ports (32 fibers) per 1/2 RU blade
• OM3/OM4 and OS2 versions
• Fully pre-assembled and pre-tested
ORDERING INFORMATION
Product Description
Q3000 SAM Blades
Q3000 SAM Blade OM3/OM4
Q3000 SAM Blade Singlemode
Fiber/ Port Count Front/ Rear Connector Part Number
32/16
32/16
Duplex LC/MPO
Duplex LC/MPO
Q3000 SAM Blade
QUFB-32FDLCMM4HR
QUFB-32FDLCMSMHR
Product Description
Q3000 Chassis Fiber Enclosure
Q3200; 1RU (1.75" x 19" x 15"), accommodates 2 blades
Q3400; 2RU (3.5" x 19" x 15"), accommodates 4 blades
Part Number
QUCH-1RU
QUCH-2RU
Product Description
SAM MPO Adapter Plates
Adapter Plate
SAM System Miscellaneous Components
Cable Management Bracket Kit
Coupling Adapter/Interface
Blank with Cable Management
Part Number
2111481-1
1553658-1
1-115
Adapter Plates www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Storage Area Management (SAN Fiber Channel Management)
ORDERING INFORMATION CONTINUED
Product Description
SAM MPO Linecard Kits (Kit includes Plates and Hydras)
16-Port Kit
OM3 (850 nm LO 50 μm) Multimode 8GFC
Singlemode
32-Port Kit
16 Gigabit SAM Kit
OM3 (850 nm LO 50 μm) Multimode 8GFC
Singlemode
OM3 (850 nm LO 50 μm)
Multimode 8GFC /16GFC
48-Port Kit
Singlemode
64-Port Kit
OM3 (850 nm LO 50 μm) Multimode 8GFC
Singlemode
Plates
2193050-1
2193050-1
2111648-1
2193051-1
2193051-1
2193052-1
2193052-1
2193016-1
2193016-1
Part Number
Hydras Kits
1553608-1, 1553609-1
1553635-1, 1553636-1
2193057-1
2193058-1
2111649-1, 2111649-2, 2111650-1, 2111650-2 2111651-1
1553608-1, 1553608-2, 1553609-1, 1553609-2 2193057-2
1553635-1, 1553635-2, 1553636-1, 1553636-2 2193058-2
1553527-1, 1553527-2, 1553528-1,
1553528-2, 1553529-1, 1553529-2
1553676-1, 1553676-2, 1553677-1,
1553677-2, 1553678-1, 1553678-2
2193045-1, 2193046-1, 2193046-2,
2193047-1, 2193047-2, 2193048-1, 2193048-2
2193053-1, 2193053-2, 2193054-1, 2193054-2,
2193055-1, 2193055-2, 2193056-1, 2193056-2
2193057-3
2193058-3
2193057-4
2193058-4
SAM MPO Cable Assemblies
SAM MPO Cable Assemblies
1-116
SAM Hydra
End A End B
OM3 (850 nm LO 50
Singlemode
μm) Multimode MPO
MPO
MPO
MPO
Length
3 m (10 ')
6 m (20 ')
9 m (30 ')
12 m (40 ')
15 m (50 ')
18 m (60 ')
21 m (70 ')
24 m (80 ')
27 m ( 90 ')
30 m ( 100 ')
3 m (10 ')
6 m (20 ')
9 m (30 ')
12 m (40 ')
15 m (50 ')
18 m (60 ')
21 m (70 ')
24 m (80 ')
27 m ( 90 ')
30 m ( 100 ') www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Part Number
1553534-1
1553534-2
1553534-3
1553534-4
1553534-5
1553534-6
1553534-7
1553534-8
1553534-9
1-1553534-0
1553640-1
1553640-2
1553640-3
1553640-4
1553640-5
1553640-6
1553640-7
1553640-8
1553640-9
1-1553640-0
Fiber
Optical LAN Solution Supporting PON Technologies
As optical fiber moves closer to end users, rapid changes are underway in both the data center and the equipment closet. As a result, new installation and maintenance techniques are being employed within enterprise applications. Passive Optical Network (PON) applications are now being deployed. Fiber is no longer limited to just access equipment. Fiber connectivity to a single user is a reality.
TE Connectivity offers complete, end-to-end PON infrastructure solutions called Optical LAN Solution (OLS). From the data center to the desktop, our customers have tapped the experience and innovation of TE to build their PON networks. TE’s suite of end-to-end connectivity solutions is truly comprehensive. This ordering guide highlights the most commonly used components that feature field-proven attributes that can save time, money and help improve customer satisfaction.
The diagram below highlights a PON deployment using one of the TE
OLS solutions. Each number corresponds to a specific innovative TE product which is described in more detail on the following pages.
For more information on TE's Optical LAN Solution, visit www.PONsource.com.
Router
FDH - Fiber Distribution Hub
OLT
FDT
Fiber Distribution Terminal
TFP Fiber Panel
Fiber Wall Plate
End-to-End Network Infrastructure
ONT
2
7
5
6
4
3
1-117
1
11 TFP Series Rack Mount
Fiber Panels
22 Rapid Indoor Fiber Distribution
Hub (IFDH) 3000i with
"preconnectorized" stubs
33 Rapid Fiber Distribution
Terminal (FDT) with
"preconnectorized" stubs
RealFlex TM MDU Drop Cables
55
Fiber Patch Cord Ethernet Cable
77
Wall Plate Fiber Splitter Box (FSB) Video WDM
Optional Component Configurations www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Optical LAN Solution Supporting PON Technologies
TFP Fiber Panels
TE‘s TrueNet Fiber Panels (TFP) combine the unique features of vertical cable guides, patented angle-left/angle-right adapters, and plug-and-play angled cassettes, which offer bend radius protection, intuitive routing, and easy connector access. The TFP series can be ordered in one, two, four, or five rack-unit sizes to fit your unique needs. Designed for rack mounting in the equipment distribution area, the TFP’s modularity, functionality and density make it ideal for mounting in close proximity to the enterprise aggregation switch (OLT). The cassettes snap into place effortlessly and come from the factory pre-labeled with simple installation instructions.
The TFP panels are ideal for the interconnection points between the active OLT and the iFDH if it is co-located in the same building as the OLS deployment. The
TFP cassettes are equipped with MPO adapters on the back allowing a simple plug-in from the feeder cable.
1RU TFP Panel
TFP Angled-Left Cassette
FEATURES
• Eliminates the need for on-site fiber terminations, which means more rapid deployments
• Incorporates angle left/angle right adapters to ensure proper bend radius
• Use the same 1, 2, 4 and 5 rack unit standard TFP chassis which simplifies ordering
• TFP cassettes equipped with MPO adapters on back allow simple plug-in from feeder cables
ORDERING INFORMATION
Description
Termination Only Rack- or Cabinet-Mount
Panel; Black; T-handle latch close
Plug-and-Play Cassettes
** To maintain consistency with fiber distribution hubs and terminals order
SC/APC cassettes for TFP panel.
Recommended Accessories
Adapter plates
1RU empty panel, Accommodates 2 plug-and-play cassettes
2RU empty panel, Accommodates 4 plug-and-play cassettes
4RU empty panel, Accommodates 8 plug-and-play cassettes
5RU empty panel, Accommodates 12 plug-and-play cassettes
Angle LEFT cassette
12 fiber cassettes**; 12 SC/APC
Singlemode Adapters
Angle RIGHT cassette
3RU Horizontal Glide Cable Manager; with integrated slack storage spools
TFP Blank Plate
TFP SC/APC Adapter Plate Left
TFP SC/APC Adapter Plate Right
Height
1.75"
3.50"
7.00"
8.75"
Part Number
TFP-1TT00-000B
TFP-2TT00-000B
TFP-4TT00-000B
TFP-5TT00-000B
TFP-12MPLSA1
TFP-12MPRSA1
ADCCMHIBS-3U
TFP-00AP00
TFP-12APLA1
TFP-12APRA1
1-118 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Optical LAN Solution Supporting PON Technologies
Rapid Fiber Distribution Hub (iFDH)
TE‘s Rapid Fiber Distribution Hub organizes and administers optical fiber cables and passive optical splitters for enterprise PON applications. The enclosures support plug-and-play termination with a cross-connect/interconnect interface that makes installation, maintenance, and changes faster and easier. The
RapidReel feeder cable speeds up installation time and conveniently stores slack inside the iFDH.
FEATURES
• Supports plug-and-play termination
• Can be either wall or rack mounted with the hardware provided
• Traditional swing-frame design allows superior rear access
• Includes RapidReel feeder cable
• Designed to meet NEMA-12 requirements
• UL 1863 Listed
Rapid Indoor FDH front panel
Rapid Indoor FDH with Easy Access to
Built-in MPO Panel
ORDERING INFORMATION
Description Feeder Cable Type
12-fiber plenum
No feeder cable**
Distribution Type
6 MPO adapters 72-Port with 9 splitter ports
72-Port Empty Hub
288-Port with 18 splitter ports 24-fiber plenum 24 MPO adapters
288-Port Empty Hub No feeder cable**
24-fiber plenum 432-Port with 22 splitter ports 36 MPO adapters
432-Port Empty Hub No feeder cable**
*Note: Splitters are purchased separately; ordering information on the following page.
** See page 1-114 for MPO-MPO cable assemblies.
Feeder Stub Length
100'
250'
500'
100'
250'
500'
100'
250'
500'
Part Number
OLH-MK072J00M0MKCA
OLH-MK072J00M0MKEA
OLH-MK072J00M0MKBA
OLH-MK072J00M0M000
OLH-MM288J00M0MKCB
OLH-MM288J00M0MKEB
OLH-MM288J00M0MKBB
OLH-MM288J00M0M000
OLH-MN432J00M0MKCB
OLH-MN432J00M0MKEB
OLH-MN432J00M0MKBB
OLH-MN432J00M0M000
1-119 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Optical LAN Solution Supporting PON Technologies
Mini Plug-and-Play Splitter Modules
TE‘s Mini Plug-and-Play Splitter Modules support centralized splitting architectures.
The modules are available in a wide range of split ratios. The rugged packaging is built for high performance, while the true plug-and-play design reduces installation time.
FEATURES
• Bend-optimized fiber and ruggedized extreme temperature cabling
• Operating temperature range -55° to +85° C
• Wavelength range of 1260-1635 nm
• Easy to insert and remove without affecting adjacent splitters
• UL 1863 Listed
Plug and Play splitter
FMT Rack Mounted Splitter Panel
SPECIFICATIONS:
Splitter Type
1x16
1x32
Max Loss
13.5 dB
16.7 dB
Typical Loss
12.8 dB
16.0 dB
Uniformity
1.0 dB
1.3 dB
Return Loss
55 dB
55 dB
Directivity
60 dB
60 dB
PDL
0.3 dB
0.3 dB
Wavelength Range
1260-1635 nm
1260-1635 nm
ORDERING INFORMATION
Description
Optical Splitter Module
Angled SC Pigtails, Used with iFDH,
FSB, Splitter drawer, and Splitter Panels
1RU FMT Rack Mount Splitter with Splitter
1 RU Rack Mount Splitter Drawer
Accommodates up to 4 mini Plug-and-Play
Splitters (purchased separately)
1 x 32 splitter
1 x 16 splitter
1 x 8 splitter
2 x 16 splitter
2 x 32 WDM Splitter
2 x 32 splitter
1 x 32 splitter
2 x 32 splitter
Splitter Adapter Plate
1 x 32 Splitter
1 x 16 Splitter
Part Number
OLS-MPP13266
OLS-MPP11666
OLS-MPP10866
OLS-MPP1P66
OLS-MPP1E66
OLS-MPP12A66
OPS-FMTSP-AJJ01
OPS-FMTSP-GJJ01
OPS-MPPACCRMPNL
2111684-1
2111684-2
1RU Rack Mount Splitter Drawer
1-120
Splitter Adapter Plate
(LGX/LSX footprint)
See 316500AE for more details.
www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Optical LAN Solution Supporting PON Technologies
Rapid Fiber Distribution Terminal
TE‘s Rapid Fiber Distribution Terminal (FDT) provides a compact, NEMA-12 rated solution for connecting optical fiber cables within enterprise environments and serves as a distribution/consolidation point. It eliminates the need for splice cases and separate cable assemblies by integrating the RapidReel cable payout system. Use of factory terminated and tested MPO connectors instead of splicing provide a plug-and-play environment that reduces labor costs and speeds project completion. The Rapid FDT provides a lockable consolidation point and localized patch field, allowing for precise cable length customization in the field, while reducing overall cable volume and simplifying routing from the FDH to the user area. The iFDT‘s compact footprint enables it to be placed under raised floors, above ceilings, or wall mounted.
FEATURES
• Built-in RapidReel technology allows for easy payoff of MPO stub
• Patented break-away spool flanges reduce slack storage size to within the enclosures footprint
• Utilizes reduced bend radius fiber
• UL 1863 listed
ORDERING INFORMATION
Description Stub Feeder Stub Length Part Number
12-fiber Loose tube plenum cable
MPO
100'
200'
300'
100'
OLR-SJ12J00D1002A
OLR-SJ12J00D2002A
OLR-SJ12J00D3002A
OLR-SJ24J00D1002A
24-fiber Loose tube plenum cable
200'
300'
500'
100'
200'
OLR-SJ24J00D2002A
OLR-SJ24J00D3002A
OLR-SJ24J00D5002A
ODT-SM12J00D03090
ODT-SM12J00D0619A
Mini-RDT 12-fiber : Lengths over
100 ft use external reel
MPO 300'
400'
ODT-SM12J00D0929A
ODT-SM12J00D1229A
500'
*Note: Other cable lengths available. Contact your local TE sales engineer.
ODT-SM12J00D1529A
Rapid FDT
Rapid FDT using slider adapter packs
Mini RDT
12 Fiber
1-121
Mini RDT and Spool Mini RDT Open and Pulling Rapid www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Optical LAN Solution Supporting PON Technologies
Fiber Splitter Boxes
TE’s Fiber Splitter Boxes (FSB) are mini Fiber Distribution Hubs that can be used for plug-and-play (PNP) or fusion splice applications.
When used as a plug-and-play box, they are ideal for uses such as lower count floors or buildings, extra capacity requirements beyond the standard
Fiber Distribution Hub (FDH), and when localized splitting or physical path redundancy (using a 2x32 split) is desired.
The same box can also be used to extend services beyond the primary building to other smaller buildings with limited users on the campus. In this type of application, the FSB is typically spliced to the OSP fiber cable connecting the buildings and would offer the optical splitting required to provide PON services to the second building.
These wall boxes provide a small footprint for splitting, terminating, and splicing. FSBs accept standard plug-and-play splitters and can be easily added after the wall box has been installed. FSBs accommodate 1x8, 1x16, 1x32, 2x16 and 2x32 splitters. Wall mounting provides significant space savings and the unique swing frame design allows for easy access to the back section of the wall box.
FEATURES AND BENEFITS
• Dual hinge design creates separation between rear splitter section and front patching access
• Splitters can be easily installed after wall box installation allowing for separate purchase
• Provides up to 32 customer access ports per splitter
– Dual hinge provides small footprint on the wall while maintaining excellent hand access to connectors
• Accepts standard mini-PNP splitter modules (same as iFDH)
• UL 1863 Listed
ORDERING INFORMATION
FSB-32 Indoor Enclosure
Description
FSB-32 Indoor Enclosure; with SC/APC adapters, 32-fiber distribution
Optical Splitter Module - Angled SC Pigtails
No splitters, no splice trays
No splitters, with heat shrink splice trays
(1) 1x32 splitter installed, no splice trays
Part Number
OSB-SBJ032000000
OSB-SBJ232000000
OSB-SBJ032A10000
(1) 1x32 splitter installed, with heat shrink splice trays OSB-SBJ232A10000
2 x 32 splitter installed, no splice trays OSB-SBJ032G10000
2 x 32 splitter installed, with heat shrink splice trays OSB-SBJ232G10000
1x32 splitter OLS-MPP13266
1x16 splitter
1x8 splitter
2x16 splitter
2x32 splitter
OLS-MPP11666
OLS-MPP10866
OLS-MPP1P66
OLS-MPP12A66
1-122 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Optical LAN Solution Supporting PON Technologies
Optical Fiber Cables
The TE reduced bend radius singlemode cable assemblies are used to connect the user area to the Rapid FDT or when connecting the ONT to the wall plate at the user end of the PON. With nearly 40 years of fiber cable manufacturing experience,
TE offers a complete family of high performance cable and related products.
TE‘s singlemode reduced bend radius cable assemblies have a bend radius of
7.5 mm and are backwards compatible with standard singlemode fiber. TE offers ultra physical contact (UPC) or angled physical contact (APC) SC connector styles.
TE maintains tight tolerances regarding the geometry and concentricity of the ferrule to maintain low insertion loss values. All cable assemblies undergo stringent testing for both insertion loss and return loss at the factory before shipment which ensures a high quality product is delivered.
Simplex Drop Cables
ORDERING INFORMATION
Description
SCAPC-SCAPC Plenum Ivory
SCUPC-SCAPC Plenum Ivory
Length in Meters Part Number
3 (10') PAT-6C6C-PSIG003M
8 (25')
16 (50')
23 (75')
31 (100')
38 (125')
46 (150')
3 (10')
8 (25')
16 (50')
23 (75')
31 (100')
38 (125')
46 (150')
PAT-6C6C-PSIG008M
PAT-6C6C-PSIG016M
PAT-6C6C-PSIG023M
PAT-6C6C-PSIG031M
PAT-6C6C-PSIG038M
PAT-6C6C-PSIG046M
PAT-SC6C-PSIG003M
PAT-SC6C-PSIG008M
PAT-SC6C-PSIG016M
PAT-SC6C-PSIG023M
PAT-SC6C-PSIG031M
PAT-SC6C-PSIG038M
PAT-SC6C-PSIG046M
Additional configurations and lengths are available; contact TE for assistance.
Note: Reduced bend radius cable is used on all Drop Cables.
SC Angled Polish
SC Ultra Polish
Stapled 3 mm Drop Cable
1-123 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Optical LAN Solution Supporting PON Technologies
Jumper Assemblies
ORDERING INFORMATION
Description
SCAPC-SCAPC Plenum Yellow
SCUPC-SCAPC Plenum Yellow
Length in Meters Part Number
3 (10') PAT-6C6C-PS0G003M
8 (25')
16 (50')
PAT-6C6C-PS0G008M
PAT-6C6C-PS0G016M
23 (75')
31 (100')
38 (125')
46 (150')
PAT-6C6C-PS0G023M
PAT-6C6C-PS0G031M
PAT-6C6C-PS0G038M
PAT-6C6C-PS0G046M
3 (10') PAT-SC6C-PS0G003M
8 (25')
16 (50')
23 (75')
31 (100')
38 (125')
46 (150')
PAT-SC6C-PS0G008M
PAT-SC6C-PS0G016M
PAT-SC6C-PS0G023M
PAT-SC6C-PS0G031M
PAT-SC6C-PS0G038M
PAT-SC6C-PS0G046M
Additional configurations and lengths are available; contact TE for assistance.
1-124 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Optical LAN Solution Supporting PON Technologies
Singlemode Reduced Bend Radius Multifiber Cable Assemblies
ORDERING INFORMATION
Description
12-Fiber 3 mm Singlemode Reduced Bend
Radius Plenum Cable
Length in Feet Part Number
50'
100'
MPA-NC6CJ50050F-NF
MPA-NC6CJ50100F-NF
MPO to SC/APC
200'
300'
50'
100'
MPA-NC6CJ50200F-NF
MPA-NC6CJ50300F-NF
MPA-NCSCJ50050F-NF
MPA-NCSCJ50100F-NF
MPO to SC/UPC
200'
300'
MPA-NCSCJ50200F-NF
MPA-NCSCJ50300F-NF
50'
100'
MPA-NCTCJ50050F-NF
MPA-NCTCJ50100F-NF
MPO to ST/UPC
200' MPA-NCTCJ50200F-NF
300' MPA-NCTCJ50300F-NF
Additional configurations and lengths are available; contact TE for assistance.
MPO-MPO Cable Assemblies
ORDERING INFORMATION
Description
12-Fiber 3 mm Singlemode Reduced Bend
Radius Plenum Cable
Length in Feet Part Number
100' MPA-NCNCJ50100F-NN
12-Fiber MPO-MPO
200'
300'
400'
500'
600'
750'
1000'
100'
200'
MPA-NCNCJ50200F-NN
MPA-NCNCJ50300F-NN
MPA-NCNCJ50400F-NN
MPA-NCNCJ50500F-NN
MPA-NCNCJ50600F-NN
MPA-NCNCJ50750F-NN
MPA-NCNCJ50305M-NN
MPA-NCNCZ50100F-NN
MPA-NCNCZ50200F-NN
24-Fiber Zip MPO-MPO
300'
400'
500'
600'
MPA-NCNCZ50300F-NN
MPA-NCNCZ50400F-NN
MPA-NCNCZ50500F-NN
MPA-NCNCZ50600F-NN
750' MPA-NCNCZ50750F-NN
1000' MPA-NCNCZ50305M-NN
Additional configurations and lengths are available; contact TE for assistance.
1-125 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Optical LAN Solution Supporting PON Technologies
Armored Cable
Our Secured Armored Optical LAN Solution allows high-security customers to have confidence that their optical network will be secure when deployed. The secured OLS platform uses TE’s interlocking armored cable that provides a tamper-proof protection cable connecting to a secured junction box that can mounted on the ceiling or in a sub floor. The junction box allows up to four input cables with a maximum of 72 fibers. The drop side of the junction box will allow up to 72 armored fibers to be run to secured user facilities connecting to a user box that can be mounted either under or on top of the desktop. The ONT box offers access separation for authorized network personnel only and simple access from a locked door allowing approved user access with issued key.
Secure Data
Center
Junction
Box
Junction Box on Desktop
Color coding of armored plant is available
ORDERING INFORMATION
Description
Armored cable
SC APC LightCrimp PLUS
Connector*
6-fiber, SM Interlocking Aluminum Armor
12-fiber, SM Interlocking Aluminum Armor
24-fiber, SM Interlocking Aluminum Armor
72-fiber, SM Interlocking Aluminum Armor
900 μm buffered and 250 μm coated fibers
900 μm buffered and 250 μm coated fibers, 3.0mm jacketed cable
Part Number
4-1777121-7
4-1777117-7
7-1553420-3
4-1777124-7
2064184-1
2064184-2
Colored, keyed, SECURE cable assemblies and other armored configurations are available.
Contact your local TE Connectivity Sales Engineer.
* Tooling Kit, SC APC (1278118-4), reference page 1-131
Handheld Optical Fiber Cleaver, SC APC (1871696-1), reference page 1-133
SC APC LightCrimp PLUS
1-126 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Optical LAN Solution Supporting PON Technologies
Patch Cords
TE's patch cord cables are available in Category 5E, 6, or augmented CAT 6 and in a variety of lengths and colors for interconnecting output of ONT to user's computer.
Category 5E Patch Cords
ORDERING INFORMATION
Description
RJ45 plug to RJ45 plug, T568B
Quantity: 1
Wired straight through
Cable Color
White
Red
RJ45 plug
(T568B)
RJ45 plug to RJ45 plug, T568A
Quantity: 1
Wired straight through
RJ45 plug
(T568B)
RJ45 plug
(T568A)
RJ45 plug
(T568A) Green
Yellow
Gray
* Replace xx with: 04 = 4'
07 = 7'
10 = 10'
15 = 15'
Contact TE for additional cable colors and lengths.
25 = 25'
50 = 50'
Blue
Green
Yellow
Gray
White
Red
Blue
Part Number
TCPC-5ERUVB-WTxxF
TCPC-5ERUVB-RDxxF
TCPC-5ERUVB-BLxxF
TCPC-5ERUVB-GNxxF
TCPC-5ERUVB-YLxxF
TCPC-5ERUVB-GYxxF
TCPC-5ERUVA-WTxxF
TCPC-5ERUVA-RDxxF
TCPC-5ERUVA-BLxxF
TCPC-5ERUVAGNxxF
TCPC-5ERUVA-YLxxF
TCPC-5ERUVA-GYxxF
Category 5E Patch Cords
Category 6 Patch Cords
ORDERING INFORMATION
Description
RJ45 plug to RJ45 plug, T568B Quantity: 1
Wired straight through
RJ45 plug
(T568B)
RJ45 plug
(T568B)
Cable Color
Black
Blue
Green
Gray
Red
White
Yellow
Blue
RJ45 plug to RJ45 plug, T568A Quantity: 1
Wired straight through
RJ45 plug
(T568A)
RJ45 plug
(T568A)
Green
Gray
* Replace xx with: 04 = 4'
07 = 7'
10 = 10'
15 = 15'
Contact TE for additional cable colors and lengths.
Red
White
Yellow
25 = 25'
50 = 50'
Part Number
TCPC-6RUVB-BKxxF
TCPC-6RUVB-BLxxF
TCPC-6RUVB-GNxxF
TCPC-6RUVB-GYxxF
TCPC-6RUVB-RDxxF
TCPC-6RUVB-WTxxF
TCPC-6RUVB-YLxxF
TCPC-6RUVA-BLxxF
TCPC-6RUVA-GNxxF
TCPC-6RUVA-GYxxF
TCPC-6RUVA-RDxxF
TCPC-6RUVA-WTxxF
TCPC-6RUVA-YLxxF
1-127 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Category 6 Patch Cord
Fiber
Optical LAN Solution Supporting PON Technologies
Category 6A Patch Cords
ORDERING INFORMATION
RJ45 to RJ45 Patch Cord Color
568B wiring
RJ45 plug
(T568B)
RJ45 plug
(T568B)
568A wiring
White
Red
Blue
RJ45 plug
(T568A)
RJ45 plug
(T568A)
* Replace xx with: 04 = 4'
07 = 7'
10 = 10'
15 = 15'
Contact TE for additional cable colors and lengths.
Yellow
Green
Gray
25 = 25'
50 = 50'
White
Red
Blue
Yellow
Green
Gray
Part Number
TCPC-6ARFVB-WTxxF
TCPC-6ARFVB-RDxxF
TCPC-6ARFVB-BLxxF
TCPC-6ARFVB-YLxxF
TCPC-6ARFVB-GNxxF
TCPC-6ARFVB-GYxxF
TCPC-6ARFVA-WTxxF
TCPC-6ARFVA-RDxxF
TCPC-6ARFVA-BLxxF
TCPC-6ARFVA-YLxxF
TCPC-6ARFVA-GNxxF
TCPC-6ARFVA-GYxxF
Category 6A Patch Cord
Security Key Plug
FEATURES
• Works with standard RJ45 jacks
• Prevents unauthorized port connections
• Prevents disconnection from active devices
• Lock to RJ45 modular jacks
• Can be used in public areas or conference rooms Security Key Plug
• 1871456-1 key/lock pairs are randomly selected from 100 different key numbers (numbered 800-
899)
• 1871456-2, -3, and -4 use specific reserved key/lock pair number 456A
• RoHS compliant
ORDERING INFORMATION
Description
Security Key Plug with
Security Key Plug reserved number
Key for Reserved Number Security Key Plug
Included Keys
2 Keys, random number
2 Keys, reserved number
None, for use with 1871456-4
–
Part Number
1871456-1
1871456-2
1871456-3
1871456-4
1-128 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Optical LAN Solution Supporting PON Technologies
Security Key Patch Cord
FEATURES
• Works with standard RJ45 ports
• Prevents disconnection from active devices
• Prevents unauthorized disconnection
• Can be used for secure connections (e.g. server lines)
• Uses specific reserved key/lock pair number 456A (two keys included)
• RoHS compliant
• Category 6 patch cables are backward compatible with Category 5E components
• Security patch cord color:
– CAT 6: black
– CAT 6A F/UTP: blue
ORDERING INFORMATION
Category Length
CAT 6 Unshielded
CAT 6A Shielded
3' (0.91 m)
4' (1.22 m)
5' (1.52 m)
6' (1.83 m)
7' (2.13 m)
8' (2.44 m)
9' (2.74 m)
10' (3.05 m)
12' (3.66 m)
14' (4.27 m)
16' (4.88 m)
18' (5.49 m)
20' (6.10 m)
1' (0.30 m)
2' (0.61 m)
3' (0.91 m)
4' (1.22 m)
5' (1.52 m)
6' (1.83 m)
7' (2.13 m)
8' (2.44 m)
9' (2.74 m)
10' (3.05 m)
12' (3.66 m)
14' (4.27 m)
16' (4.88 m)
18' (5.49 m)
20' (6.10 m)
1' (0.30 m)
2' (0.61 m)
Locks on Both Ends
2111190-3
2111190-4
2111190-5
2111190-6
2111190-7
2111190-8
2111190-9
1-2111190-0
1-2111190-2
1-2111190-4
1-2111190-6
1-2111190-8
2-2111190-0
2111179-1
2111179-2
2111179-3
2111179-4
2111179-5
2111179-6
2111179-7
2111179-8
2111179-9
1-2111179-0
1-2111179-2
1-2111179-4
1-2111179-6
1-2111179-8
2-2111179-0
2111190-1
2111190-2
Locks on one End
2111236-3
2111236-4
2111236-5
2111236-6
2111236-7
2111236-8
2111236-9
1-2111236-0
1-2111236-2
1-2111236-4
1-2111236-6
1-2111236-8
2-2111236-0
2111225-1
2111225-2
2111225-3
2111225-4
2111225-5
2111225-6
2111225-7
2111225-8
2111225-9
1-2111225-0
1-2111225-2
1-2111225-4
1-2111225-6
1-2111225-8
2-2111225-0
2111236-1
2111236-2
CAT 6 Patch Cord
CAT 6A Patch Cord
1-129 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Optical LAN Solution Supporting PON Technologies
Angled Faceplates
FEATURES
• Accepts all AMP-TWIST jacks, SL series jacks, and SL series inserts
• Angled connector exits
• Protects connections
• Allows closer furniture placement
ORDERING INFORMATION
Description
Angled Faceplates
2-port
4-port
Inserts
LC Duplex couplers
SC Simplex coupler; singlemode
F-Connector coupler, 2 GHz
Blank
Singlemode APC
Singlemode
Figure
A
B
C
D
E
F
G
Other colors are available, contact TE for additional options.
Color
Almond
Almond
Green
Blue
Green
Almond
Almond
Part Number
1375155-1
406185-1
1933286-3
1933286-4
1499836-9
1499855-1
1116412-1
Figure A Figure B
Figure C Figure D
Figure E Figure F
Figure G
1-130 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Optical LAN Solution Supporting PON Technologies
SL Series Faceplates
FEATURES
• Single gang and double gang, single-sided faceplates accept three 1 unit or two 1.5 unit SL series modules
• Double gang, double-sided faceplates accept three 1 unit or two 1.5 unit
SL series modules on each side
• Front-loading modules eliminate need to remove faceplates from wall for changes or repairs
• Double gang, double-sided SL series faceplates:
– Dimensions (DxWxH): 0.675" x 4.490" x 4.540"
– For use with openings a minimum of 2.81" x 3.59"
(not suitable for mud rings/device covers)
ORDERING INFORMATION
Description
SL Series Faceplates Almond
Width
Single Gang
Double Gang
Single-sided
Double-sided
Other colors are available, contact TE for additional options.
Figure
A
B
Part Number
1339118-1
1479486-1
Figure A Figure B
HIDEAWAY Multimedia Outlets
FEATURES
• Accepts the following (see table for detailed load information):
– Shielded and unshielded SL series jacks
– AMP-TWIST jacks
– SL series inserts
• Fits single and double gang electrical J-boxes
• Features “invisible” icon holes which remain hidden until used
• Features integral tabs for easy fiber loop management
• Breakaway tabs in duplex fiber coupler cut outs allow HIDEAWAY outlets to accept “flangless” SECURE LC duplex, standard LC duplex, or hybrid LC duplex couplers with retention clips (break out the tabs when using standard duplex couplers)
ORDERING INFORMATION
Description
4-Port
6-Port
Figure
A
B
Part Number
1479946-1
1479815-1
Figure A
Figure B
1-131 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Optical LAN Solution Supporting PON Technologies
HIDEOUT Outlets
FEATURES
• Double gang box with single gang cover recommended
• May not fit all single gang boxes
• Hides and protects cable connections
• Feeds from bottom to allow flush furniture placement
• Fits standard electrical boxes
• Each kit includes sub-plate, faceplate, adhesive labels, cable ties, and mounting screws. Media modules and icons must be ordered separately. Faceplates are plastic except for the stainless steel version
• Accepts the following (see table for detailed load information):
– Shielded or unshielded SL series jacks
– Unshielded 110Connect jacks
– SL series inserts
• Shielded SL series jacks work in bottom row of faceplate only
ORDERING INFORMATION
Description
HIDEOUT Outlet Kit Almond
Included Faceplate
Screw-on
Snap-on
Part Number
503997-1
503999-1
Note: Hideaway and Hide out Outlets can use SCAPC adapter pn 2-5502776-3
Snap-on Cover
Screw-on Cover
1-132 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Optical LAN Solution Supporting PON Technologies
Desktop Monuments
FEATURES
• Power Monuments:
– Provide access to duplex power outlet at the desktop
– Eliminates the need to feed power cables behind or through desks
– Supplied with an 8' (2.4 m), 3-prong power cord for connection to existing electrical outlets
• Voice/Data Monuments:
– Accepts standard FLEX-MODE faceplates
– Horizontal cabling can be connected directly to SL series modular jacks
(recommended for Category 5E applications)
• Attach to any desktop from 0.90" - 1.78" (22.9 mm - 45.2 mm)
• No special tools required to attach, simply place the monument onto the edge of the desktop and tighten the integrated thumb screw
• UL listed and CSA certified
ORDERING INFORMATION
Description
Power Monument; 15 Amp
Voice/Data Monument Empty Housing; requires FLEX-MODE faceplate
Flex-Mode flush faceplate; 2-port
SL series; 4-port
Figure
A
B
C
D
Color
Black
Black
Black
Black
Figure A
Figure C
Part Number
556222-3
1116360-3
558106-1
1933134-1
Figure B
Figure D
Consolidation Point Transition Cable Assemblies
FEATURES
• Ideal for shared ONT applications
• Form connections between remote/shared ONTs and the work area
• Compatible with all SL series faceplates
• Factory-assembled and tested
• Save time and money on moves, adds and changes
• Lead-free (no heavy metals)
• Gray cable jacket
ORDERING INFORMATION
End A End B
Category 5E Modular Plug
Category 6 Modular Plug
Category 6A Modular Plug
SL Series Category
5E Modular Jack
Un-terminated
Length
20'
30'
40'
50'
50'
Transition Cable Assembly
Plenum (CMP) T568A Plenum (CMP) T568B
219174-1 219175-1
219174-2 219175-2
219174-3
219174-4
1499057-4
5-1499783-0
219175-3
219175-4
1499057-8
5-1933335-0
1-133 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Optical LAN Solution Supporting PON Technologies
Media Convergence Center
FEATURES
• 20 AWG steel with white powder coat
• Multiple knockouts on all surfaces
• Versatile mounting grid for multiple connectivity panels and modules
• Two (2) knockouts for duplex electrical boxes
• 20 AWG steel with white powder coat
• Beveled edge for safety & aesthetics
• Screw on cover
• Lock for added security
A
B
D
E
C
RCS14
Media Convergence Center
ORDERING INFORMATION
Description
RCS14 Enclosure with screw-on Cover
RCS14 Enclosure without Cover
RCS 14 Hinged Lockable Cover
RCS28 Enclosure with screw on Cover
RCS28 Enclosure without Cover
RCS28 Hinged, Lockable Cover
Dimension
14.3 in H x 14.3 in W x 3.6 in D
28.0 in H x 14.3 in W x 3.6 in D
Figure
A
B
C
D
E
Part Number
1933691-1
1933837-1
1933694-1
1933692-1
1933838-1
1933695-1
RCS28
Media Convergence Center
1-134 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Accessories and Tooling
Fiber Optic Accessories and Tooling
TE Connectivity's tool kits include all tools and consumables necessary for fiber termination
• Universal toolkits for installing all LightCrimp PLUS connectors
• Includes tools for installing MT-RJ and MT-RJ SECURE jacks
• Includes all tools necessary to install epoxy/polish connectors
LightCrimp PLUS LC/SC and LightCrimp Splice
Termination Tool Kit
• Includes all tools need for installing LightCrimp PLUS LC,
LC SECURE, SC, and LightCrimp Splice
• Convenient carrying case
• Tool kit includes:
- Splice/Cable buffer holder
- PRO-CRIMPER III hand tool
- LC/SC/Splice die set
- Fiber cleaver
- 2.0 mm cable slitter
- Buffer stripper
- Cable jacket stripper
- Strength member shears
Tool Kit Compatibility Chart
ORDERING INFORMATION
Tool Kit Name
MT-RJ
Jacks
MT-RJ
SECURE Jacks
LightCrimp PLUS Termination Tool Kit
LightCrimp PLUS No-epoxy/No-polish Universal Tool Kit
LightCrimp PLUS No-epoxy/No-polish Universal Tool Kit
LightCrimp PLUS No-epoxy/No-polish LC and SC Tool Kit
LightCrimp PLUS No-epoxy/No-polish LC and SC Tool Kit
LightCrimp PLUS No-epoxy/No-polish ST Tool Kit
LightCrimp PLUS No-epoxy/No-polish ST Tool Kit
MT-RJ Jack Tool Kit
Epoxy/Polish Tool Kits
X
X
–
–
X
–
–
–
X
–
–
–
X
X
–
–
–
–
X
X
–
–
*Note: Termination of LC Epoxy/Polish Connectors requires additional tools listed in this chapter.
**Note: Termination includes LC SECURE Connectors
Termination instructions may be found at www.te.com/foguide
–
–
–
–
X
X
X
LightCrimp
PLUS
**LC SC ST
X X –
X X X
–
–
X
X
X
–
–
X
X
X
–
–
–
–
–
–
–
–
–
–
LightCrimp
Splice
X
–
Epoxy/Polish
LC SC ST
– – –
– – –
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
X*
X*
–
–
X
–
–
–
–
X
Tool Kit
Part Number
1553212-1
1278118-4
1278118-5
1754845-1
1754845-2
492697-1
492697-2
1278346-1
1278346-2
503746-7
503746-1
1-135 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Accessories and Tooling
Epoxy/Polish Connector Consumables/Compatibility Chart
ORDERING INFORMATION
Epoxy/Polish
Connector
LC Singlemode
LC Multimode
SC Singlemode
SC Multimode
ST Singlemode
ST Multimode
Epoxies
EPO-TEK TRA-CON
504035-1 1918652-1
X X
X
X
X
–
–
X
X
X
X
X
*Note: Epoxy and film for ≈ 100 connectors.
HYSOL
502418-1
X
X
X
X
X
X
9 µm 5 µm
1374484-1 228433-8
X X
Polishing Films
Diamond Film 0.3 µm Final Polishing Film
503887-1 228433-5 502748-2
X X –
X
–
X
X
X
–
X
X
–
X
–
–
–
X
X
X
–
–
–
X
X
X
X
X
–
Consumables
Package*
502306-4
502306-4
502306-2
502306-2
502306-2
502306-1
LightCrimp PLUS Termination Tool Kits
FEATURES
• Universal kits Include all tools needed for installing all
LightCrimp PLUS no-epoxy/no-polish connectors, MT-RJ, and MT-RJ SECURE jacks
• Convenient carrying case
ORDERING INFORMATION
Description
Universal LightCrimp PLUS
No-epoxy/No-polish Tool Kit
LightCrimp PLUS Connector
Termination Tool Kit
For Use With
LC, MT-RJ, SC, ST
LC, SC
ST
Optional Components
Cleave Tool 1871696-1 Inspection Microscope 1754767-1
X –
X X
X
X
X
X
–
X
–
X
Termination instructions may be found at www.te.com/foguide
Part Number
1278118-4
1278118-5
1754845-1
1754845-2
492697-1
492697-2
1-136 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Accessories and Tooling
MT-RJ Jack Termination Tool Kit
Includes all tools needed for installing
MT-RJ and MT-RJ SECURE jacks.
ORDERING INFORMATION
Description
MT-RJ Termination Tool Kit with cleave tool
Optional Components
Cleave Tool 1871696-1 Inspection Microscope 1754767-1
X –
X X
Part Number
1278346-1
1278346-2
LightCrimp PLUS Cable Holders
Used in LightCrimp PLUS connector terminations (included in LightCrimp PLUS Tool Kits).
Figure A
Figure B
Figure C
Figure D
ORDERING INFORMATION
Connector Type
ST
SC
LC
LC and SC
LightCrimp Splice Holder
* Used with die set 1985766-1
Termination instructions may be found at www.te.com/foguide
Figure
A
B
C
D
E
Part Number
492703-1
1278023-1
1754138-1
*2064540-1
*1985771-1
Figure E
1-137 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Accessories and Tooling
Hand Held Optical Fiber Cleaver
FEATURES
• Cleave fibers for LightCrimp PLUS connectors, MT-RJ, and MT-RJ SECURE jacks
• Operator independent
• Blade life-span more than 10,000 cleaves
• Cleave surface angle <1.5°
• No fracture, roll-off, or lip cleaves
ORDERING INFORMATION
Description
Hand Held Optical Fiber Cleaver
Part Number
1871696-1
Epoxy/Polish Connector Termination Tool Kits
FEATURES
• Includes all tools necessary to install the listed epoxy/polish connectors
• For LC terminations, also order LC termination accessories kit
• Tool kits include:
– Pro-Crimper III Hand
– Tool and crimping dies
– Polishing bushings
– Polishing film
– Fiber strippers
– Scribe tool
– Includes polishing films to install 60 epoxy/polish connectors
– Epoxy is sold separately
– Does not include curing oven or microscope
– Convenient carrying case
ORDERING INFORMATION
Description
LC Termination Accessories Kit (use with 503746)
Epoxy/Polish Connector Termination Tool Kits
For Use With
LC
SC
ST
Termination instructions may be found at www.te.com/foguide
Part Number
1754462-1
503746-7
503746-1
1-138 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Accessories and Tooling
EPO-TEK 353ND Epoxy
FEATURES
• For use with SC and LC Connectors
• Pre-measured two-part packets for consistent results
• Long pot life once mixed
• Heat-cured epoxy
• Supplied in 4-gram packets
• Cures in 15 minutes at 115° C
• Epoxy curing time starts after the oven has restabilized to the desired temperature after inserting the connectors into the curing block
ORDERING INFORMATION
Description
EPO-TEK 353ND Epoxy
Part Number
504035-1
TRA-CON Epoxy
FEATURES
• For use with SC, LC and ST Connectors
• Pre-measured two-part packets for consistent results
• Can be heat-cured or cured at ambient temperature
• Supplied in 2-gram packets
• Each packet terminates ≈ 250 connectors
• 25 packets per pack
• Pot life ≈ 30 minutes
• Cures in:
– 24 hours @ 25° C
– 2 hours @ 65° C
– 10 minutes @ 110° C
• Epoxy curing time starts after the oven has restabilized to the desired temperature after inserting the connectors into the curing block
ORDERING INFORMATION
Description
TRA-CON Epoxy
Part Number
1918652-1
1-139 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Accessories and Tooling
HYSOL Epoxy-Tubes
FEATURES
• For use with SC, LC and ST Connectors
• Two-part epoxy in two tubes
• Heat-cured epoxy
• Terminates ≈ 400 connectors
• One set of two (2) tubes per part number
• Pot life ≈ 30 minutes
• Cures in 30 minutes at 100° C
• Epoxy curing time starts after the oven has restabilized to the desired temperature after inserting the connectors into the curing block
ORDERING INFORMATION
Description
HYSOL Epoxy-Tubes
Part Number
502418-1
Epoxy Applicator Syringe
ORDERING INFORMATION
Description
Epoxy Applicator Syringe
Part Number
501473-3
1-140 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Accessories and Tooling
Polishing Films and Consumables Kits
• Polishing films used to install LightCrimp and epoxy/polish connectors
• See listing of correct films by connector type
• Consumable kits include all consumables needed to install ≈ 100 of the listed epoxy/polish connectors
ORDERING INFORMATION
Description For Use With
Hand Polishing Film
Final Polishing Film
Consumables Kit
Epoxy/Polish Connectors
Epoxy/Polish Connectors
Multimode ST
SC, singlemode ST
LC
Package Quantity
100
15
100
100
5
100
5
–
–
–
Grit Grade
15 µm
9 µm
5 µm
1 µm
Diamond
0.3 µm
Final
–
–
–
Part Number
228433-9
1374484-1
228433-8
228433-7
503887-1
228433-5
502748-2
502306-1
502306-2
502306-4
Epoxy Curing Oven
FEATURES
• Reduces time required to cure epoxy
• Provides a uniform, controlled curing environment
• Used for all of TE's AMP NETCONNECT optical fiber epoxy/polish connectors
• Variable temperature control (60° C to 125° C)
• Includes thermometer - Epoxy curing time starts after the oven has restabilized to the desired temperature after inserting the connectors into the curing block
• Includes cable support bracket
• Two voltage options
• Comes equipped to cure up to four duplex connectors and twelve simplex connectors at once
– Optional blocks reconfigure to eight duplex or twenty-four simplex connectors
ORDERING INFORMATION
Description
Curing Oven
Adapter Block for 8 Duplex Connectors
Adapter Block for 24 Single Connectors
LC Oven Block Assembly
110 VAC
220 VAC
Part Number
502134-1
502134-2
502222-1
502129-1
1457628-1
1-141 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Accessories and Tooling
Inspection Microscope
• Optimal visual examination of terminated ends
• 500 µ m field of view
• Dual illumination
• Coaxial for inspecting polish quality
• Oblique for general conditions
• Pre-centered, threaded adapter mount provides easy focusing and changing of connectors
• Field and laboratory examination for multimode and singlemode fibers
• Portable
• Integral infrared filter for safety
- Do NOT use any microscope to view active fiber signals
• Disposable, Type LR44 batteries
• Long-life LED (approximately 100,000 hours of operation)
• Each Kit includes:
- 10-power objective microscope with an impact resistant ergonomic rubber shell and high quality glass optics
- 20-power eyepiece
- Padded carrying case with an integrated belt loop and internal adapter storage pocket
- Neck lanyard with safety breakaway feature
- Universal 2.5 mm ferrule adapter (for SC, ST and FC)
ORDERING INFORMATION
Description
Inspection Microscope
Connector Adapters
1.25 mm Universal
2.5 mm Universal
LC Duplex
LC APC adapter
MT-RJ
SC APC
MPX
MPX APC
MPO
MPO APC
FSMA
DANGER: Active fibers should never be viewed through a microscope.
(LC and MU)
(SC, ST and FC)
Connector Adapter
Coupling adapter
(Required for FSMA adapter)
Part Number
1754767-1
1754765-1
1754766-1
2123273-1
1553785-1
1754768-1
1828833-1
1828834-1
1828835-1
1828836-1
1828837-1
1985040-1
1985041-1
1-142 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Accessories and Tooling
Polishing Bushings, Curing Sleeves, and
Strip Card Kit
FEATURES
• Polishing bushings included in many tool kits
• Curing sleeves hold connectors in oven
Figure A Figure B
Description
LC Fiber Protectors, for Buffered Fiber
LC Fiber Protectors, for Jacketed Cable
Polish Bushing
Curing Sleeve
Strip Template Kit
Figure C
ORDERING INFORMATION
Cable Jacket
Diameter (mm)
–
Used With
Epoxy/polish LC connectors
–
3.0
–
3.0
–
Epoxy/polish LC connectors
Ceramic and stainless steel ST connectors
Ceramic, stainless steel and polymer composite ST connectors
SC connectors
LC connectors
Ceramic, stainless steel and polymer composite ST connectors
SC connectors
SC and ST connectors
Figure D
Notes
Metal
Black Polymer
Black Polymer
Metal
12 pieces
1 piece
Figure Part Number
1457630-1
A
B
C
D
1457630-2
503337-1
503304-1
502631-1
1754074-1
502259-1
502656-1
501818-1
1-143 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Accessories and Tooling
PRO-CRIMPER III Fiber Optic Hand Tool and Die Sets
FEATURES
• Crimp tool and die sets for LightCrimp, LightCrimp PLUS, and
Epoxy/Polish style connectors
• Ergonomic tool design for comfort and easy actuation
• Die sets are interchangeable in the crimp tool
• Die set 1985766-1 can be used with the fiber protective end cap in place for LightCrimp PLUS LC and SC connectors
Figure A
ORDERING INFORMATION
Description
PRO-CRIMPER III Hand Tool
(Die Sets Purchased Separately)
For Use With
SC (Polymer Crimp Body)
SC (Metal Crimp Body)
LC
ST, Ceramic
ST, Stainless Steel
ST, Stainless Steel (504000-X Series Only)
ST Ceramic Used with Loose Tube
LightCrimp PLUS LC
LightCrimp PLUS and LightCrimp SC
LightCrimp PLUS and LightCrimp ST
LightCrimp PLUS LC and SC, LightCrimp Splice
Termination instructions may be found at www.te.com/foguide
Cable Jacket Diameter (mm)
3.0
2.4 and 3.0
1.6 – 2.0, 2.4
3.0
1.6 – 2.0, 2.4, 3.0
3.0
3.0
3.0
3.8
1.6 - 2.0
3.0
3.0
2.0
Figure
A
B
Part Number
2064431-1
Die Set Only
503910-1
492025-1
1588175-1
492131-1
1588175-1
58424-1
58424-1
58552-1
503890-1
1754136-1
492783-1
492622-1
1985766-1
Figure B
Hand Tool w/Die Set
503911-1
492026-1
1588176-1
–
1588176-1
58433-4
58433-4
58551-1
–
1754137-1
492782-1
492623-1
2064603-1
1-144 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Accessories and Tooling
MTP/MPO IBC (In Bulkhead Cleaner)
FEATURES
• Dry cloth cleaner utilizes densely woven micro-fiber cloth
• Cleans male (with pins) or female MTP/MPO connectors in adapters, bulkheads, and faceplates
• Pre-washed cleaning cloth is lint and debris free
• Each cleaner is capable of more than 400 cleanings
• Protective dust cover doubles as an adapter cap for cleaning unmated connectors
• FOCIS 5-Type MTP/MPO interface compliant
• Removes dust and oil contamination
ORDERING INFORMATION
Description
MTP/MPO IBC (In Bulkhead Cleaner)
OPTIPOP R Reel Optical Connector Cleaner
• Densely woven micro-fiber cloth cleans fiber optic connector tips while reducing static charge
• Variety of reel cleaner configurations allow for use on the major connector types including FC, SC, ST, LC, MT-RJ, and MPO
Figure A
Part Number
1918809-1
Figure B
Figure C
ORDERING INFORMATION
Description
MPO w/pins Reel Cleaner
One slot Reel Cleaner; 1.25mm, 2.5mm, MT no pins
MT-RJ plug w/pins Reel Cleaner
Two slot Reel Cleaner; 1.25mm and 2.5mm
Reel Cleaner refill (6 per pack)
1-145
Figure D www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Figure E
Figure
A
B
C
D
E
Part Number
1918802-1
1918803-1
1918804-1
1918805-1
1918806-1
Fiber
Fiber Optic Accessories and Tooling
OPTIPOP C Card Optical Connector Cleaner
FEATURES
• Densely woven micro-fiber cloth cleans fiber optic connector tips while reducing static charge
• For use on the major connector types including FC, SC, ST, LC,
MT-RJ, and MPO
• Captures debris and other contamination
• Cloth dimensions:
120 mm x 57 mm (4.72" x 2.24")
ORDERING INFORMATION
Description
Fiber Connector Card Cleaner
Card Cleaner Refill (10 per pack)
NEOCLEAN Stick Cleaner
FEATURES
• Dry cloth stick cleaners utilize a densely woven micro-fiber cloth to clean fiber optic connector tips while reducing static charge
• Perforated handle for customizing length and angle
• Overall stick length: 151 mm (5.94")
• 250 Sticks per package
ORDERING INFORMATION
Description
Stick Cleaner - 2.5 mm Tip Diameter
Stick Cleaner - 1.25 mm Tip Diameter
Part Number
1918810-1
1918811-1
Part Number
1918807-1
1918808-1
1-146 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Accessories and Tooling
LC and SC Connector Cleaner (In Bulkhead Cleaner)
FEATURES
• Dry cloth cleaners specially designed to clean single fiber connectors in adapters, bulkheads, and faceplates
• Dust cap of the cleaner acts as an adapter for cleaning unmated connectors
• Extended tip reaches recessed connectors
• Removes dust and oil contamination
• Disposable cleaner with 525+ cleanings per unit
ORDERING INFORMATION
Description
LC Connector Cleaner (In Bulkhead Cleaner)
SC Connector Cleaner (In Bulkhead Cleaner)
Professional Fiber Connector
Inspection/Cleaning Kits
FEATURES
• Perform inspection, cleaning, maintenance, and troubleshooting on optical connectors
• Kits include: carrying case, 200x inspection microscope, visual fault locator, various styles of connector cleaners, and detailed inspection and cleaning instructions
ORDERING INFORMATION
For Use With
LC, SC, ST, FC, MT-RJ, and MPO Style Connectors
LC, SC, ST, FC, and MT-RJ Style Connectors
LC, SC, ST, and FC Style Connectors
Figure A
Figure B
Figure
A
B
Part Number
2064500-1
2064499-1
Figure A
Figure
A
Part Number
2064651-1
2064651-2
2064651-3
1-147 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Accessories and Tooling
Velcro Cable Ties
For 8" and 12" ties, an order quantity of one equals one roll of ten ties.
Figure B
ORDERING INFORMATION
Description
1" x 8"
1" x 12"
5/8" x 5 yards
1" x 12" Flame Retardant*
Figure Black
A 1375253-2
B
C
1375254-2
1375255-2
1375256-2
Part Number
Blue
–
–
1375255-6
–
* NOTE: Complies with NEC 300-22(c) and (d) for use in environmental air handling spaces.
Available in black only.
Figure A
AMP-TY Nylon Cable Ties
ORDERING INFORMATION
Length
4 " [103.0 mm]
Dimensions (Approximate)
Width Thickness
0.096
" [2.44 mm] 0.037
" [0.94 mm]
6
8
12
" [155.0 mm]
" [204.0 mm]
" [300.0 mm]
0.140
0.184
0.183
" [3.56 mm]
" [4.67 mm]
" [4.65 mm]
0.045
0.047
0.051
" [1.14 mm]
" [1.19 mm]
" [1.30 mm]
Minimum
Tensile Strength
18 lbs [80.1 N]
30 lbs [133.5 N]
50 lbs [222.5 N]
50 lbs [222.5 N]
Maximum Bundle
Diameter
0.75
1.25
1.75
" [19.10 mm]
" [31.75 mm]
" [44.45 mm]
3.00
" [76.20 mm]
Package
Quantity
1000
100
1000
100
1000
100
1000
100
Natural
2-604771-9
1-604771-9
2-603227-9
1-603227-9
2-604772-9
Color
Black
2-604771-0
1-604771-0
2-603227-0
1-603227-0
2-604772-0
1-604772-9
2-604751-9
1-604751-9
1-604772-0
2-604751-0
1-604751-0
1-148 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Accessories and Tooling
TE's TrueNet Copper and Fiber Labeling Software and Labeling Sheets
TE offers a complete labeling solution by SharpMark for the most popular copper and fiber solutions. TE labels are design to be used with a PC and standard laser printer. All label sheets are available through an TE authorized distribution partner.
Contact TE Customer Service at 1-800-553-0938 for more details.
Free Labeling Software
The free labeling software can be downloaded from TE’s website at www.te.com/TruenetLabeling in less than 5 minutes.
FEATURES
• Easy to download software can be used with Windows or Vista
• Label sheets are designed specifically for TE’s most popular products
ORDERING INFORMATION
Description
Adhesive label for TE's TrueNet patch cords or horizontal cable 1/2" x 1 1/2'
Each label sheet contains 105 individual labels
Adhesive label for TE's TrueNet patch cords or horizontal cable 1" x 1 1/2'
Each label sheet contains 49 individual labels
Adhesive label for TE's TrueNet patch cords or horizontal cable 1" x 2 1/4"
Each label sheet contains 35 individual labels
Adhesive label for TE's TrueNet patch cords or horizontal cable 1" x 5 1/2"
Each label sheet contains 14 individual labels
Adhesive label for TE's TrueNet 192 Fiber NGF Blocks
Each label sheet contains 1 label sheet for left side of block
Adhesive label for TE's TrueNet 192 Fiber NGF Blocks
Each label sheet contains 1 label sheet for right side of block
Adhesive label for TE's TrueNet 144 Fiber NGF Blocks
Each label sheet contains 1 label sheet for left side of block
Adhesive label for TE's TrueNet 144 Fiber NGF Blocks
Each label sheet contains 1 label sheet for right side of block
Adhesive label for TE's TrueNet 1RU TFP Fiber Panel
Each label sheet contains 16 labels for the front and back of the hinged label
Adhesive label for TE's TrueNet 2RU TFP Fiber Panel
Each label sheet contains 6 labels for the front and back of the hinged label
Adhesive label for TE's TrueNet 5RU TFP Fiber Panel
Each label sheet contains 2 labels for the front and back of the hinged label
UOM Part Number
SH ADCLS-CL4A
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
ADCLS-CL10A
ADCLS-CL12A
ADCLS-CL24A
ADCLS-NGF192LCAL
ADCLS-NGF192LCAR
ADCLS-NGF144SCAL
ADCLS-NGF144LCAR
ADCLS-TFP1RUA
ADCLS-TFP2RUA
ADCLS-TFP5RUA
Label Sheets designed for NGF Blocks
1-149 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Test Equipment
OM3 and OM4 (50 μm) and OM2 (50/125 μm) Multimode LC Test Kits
FEATURES
• Test Kits include:
– Cable assemblies
– LC duplex clips
– Mandrels
– Carrying case
• Test kits for LC SECURE connector systems also available
• See “FIELD TESTING LC OPTICAL FIBER SYSTEMS” white paper
(available on-line at www.te.com/EnterpriseNetworks) for test details
ORDERING INFORMATION
Description
For use with Dual Fiber Testers with
SC Transmit and LC Receive Ports
ST Transmit and LC Receive Ports
LC Transmit and LC Receive Ports
Part Number
1828867-1
1828867-2
1828867-3
OM3 and OM4 (50 μm) and OM2 (50/125 μm) Multimode Replacement
Components for LC Test Kits
FEATURES
• Assemblies are 3 meters in length
• Assemblies are simplex style
• Cable assemblies are riser (OFNR) rated
ORDERING INFORMATION
Description
Mandrels (Transmit side only)
LC Duplex Clips (pack of 6)
SC to LC Simplex Assembly, 3 m
ST to LC Simplex Assembly, 3 m
LC to LC Simplex Assembly, 3 m
Part Number
1435119-1
1754371-2
1907490-3
1907493-3
1907496-3
1-150 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Test Equipment
62.5/125 μm OM1 Multimode LC Test Kits
FEATURES
• Test kits include:
– Cable assemblies
– LC duplex clips
– Mandrels
– Carrying case
• Test kits for LC SECURE connector systems also available
• See “FIELD TESTING LC OPTICAL FIBER SYSTEMS” white paper
(available on-line at www.te.com/EnterpriseNetworks) for test details
ORDERING INFORMATION
Description
For use with Dual Fiber Testers with
SC Transmit and LC Receive Ports
ST Transmit and LC Receive Ports
LC Transmit and LC Receive Ports
Part Number
1828868-1
1828868-2
1828868-3
62.5/125 μm OM1 Multimode Replacement Components for LC Test Kits
FEATURES
• Assemblies are 3 meters in length
• Assemblies are simplex style
• Cable assemblies are riser (OFNR) rated
ORDERING INFORMATION
Description
Mandrels (Transmit side only)
LC Duplex Clips (pack of 6)
SC to LC Simplex Assembly, 3 m
ST to LC Simplex Assembly, 3 m
LC to LC Simplex Assembly, 3 m
Part Number
1435118-1
1754371-2
1907491-3
1907494-3
1907497-3
1-151 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE
Fiber
Fiber Optic Test Equipment
Singlemode LC Test Kits
FEATURES
• Test kits include:
– Cable assemblies
– LC duplex clips
– Mandrels
– Carrying case
• Test kits for LC SECURE connector systems also available
• See “FIELD TESTING LC OPTICAL FIBER SYSTEMS” white paper
(available on-line at www.te.com/EnterpriseNetworks) for test details
ORDERING INFORMATION
Description
For use with Dual Fiber Testers with
SC Transmit and LC Receive Ports
ST Transmit and LC Receive Ports
LC Transmit and LC Receive Ports
Part Number
1828869-1
1828869-2
1828869-3
Replacement Components for Singlemode LC Test Kits
FEATURES
• Assemblies are 3 meters in length
• Assemblies are simplex style
• Cable assemblies are riser (OFNR) rated
ORDERING INFORMATION
Description
LC Duplex Clips (pack of 6)
LC to SC Simplex Assembly, 3 m
LC to ST Simplex Assembly, 3 m
LC to LC Simplex Assembly, 3 m
Part Number
1754371-4
1907489-3
1907492-3
1907495-3
1-152 www.te.com/bns +1-800-553-0938 Fax: 1-717-986-7406 08/14 313948AE

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Fiber cable assemblies
- Fiber trunk solutions
- Fiber optic patch cords
- Fiber enclosures
- High Density Equipment Panel
- Optical Distribution Frame Solutions