BOD METERS
BOD
M
METERS
BODT-1, Biological Oxygen Demand, With Integral Incubator
The Quick BODT-1 takes significant steps to do away with the weaknesses of
biosensor BOD measuring apparatus entailed by trouble and time required
to replace and load microbe membrane and with an exchangeable
electrode. Unit that makes it easy to use right away provides improved
operability and maintainability standard and buffer bacteriostatic solutions
and antibacterial tubing allow stable measurements for long terms The
dedicated shipping and recovery box for Used and replacement electrode
units may be reused any number of times and the exclusion of apparatus
environmentally friendly and easy to use .
BODT-1
Model
Measurement method
BODT-1
Biosensor
Liquid samples containing soluble organic matter such
as drainage and river water
0-20 mg/l (base Measurement range)
Variable with pump rpm and sample
Measurement range
Contact time
60 min/specimen
Measurement time
(assuming calibration for each specimen)
Single-point calibration with glucose glutamic solution
Calibration
LCD, 20 characters x 2 lines
Readout
Precision up to 0.1 mg/L
Full-scale within ±5%
Reproducibility
Recorder output (0-5 V analog output)
Hot output (0-5 V analog output)
Output
Printer output (Printy 3 serial thermal printer)
Adjustable within 35°C±0.2°C
Temperature controller
Measurable
Features:
Exchangeable microbe electrode units
make operation smoother and less
time-consuming than loading and
replacing conventional membranes.
Electrode units may be used for one
month continuously or for three
months intermittently with standard
samples. (Electrode units should be
stored in refrigerators when not taking
measurements.)
Front panel allows simple, pushbutton
operation.
Ease of replacement by installing
AC 100V±10V,50/60HZ,3A max
Rated power source
electrode units or tubing into the
W370 × D350 ×H300 mm
Dimensions
opened door in the front panel.
Anti-reflux valves and antibacterial
14kg
Weight
tubing reduce the frequency of
5-40°C
Ambient temperature
maintenance.
90% RH max (Without condensation)
Ambient humidity
Bacteriostatic is mixed into standard
Standard solution, buffer solution, antibacterial tubing
and buffer solutions, so measurements
Peripherals
set, printer
are stable over the long term.
Measurements in regions of low concentration are especially stable.
Changing pump rpm or sample contact time allows measurements in regions of high concentration.
The optional microbe fixation kit enables the use of other microbes and, therefore, a variety of water samples.
Making no use of dangerous reagents and emitting no harmful effluents, the Quick BODT-1 is environmentally friendly.
BODT-5, BOD Tester
BODT-5
Application: Apply to Surface Water, Sewage, Industrial Wastewater in the BOD.
Features:
Display the trend curve
Printer output
Link to the compute through USB interface
Mercury-free devices to ensure the accuracy & safety of the BOD measurement
Real-time clock display
Automatic collection and storage of data
Depict BOD curves for the user to view
Link to the computer to print curves
No parameter and data loss after sudden cut-off
LCD humanization interface display, easy operation
1-30days of the test time, setting by the keys
Store data and update the result, observe the change rate of BOD in the
LCD screen during any testing time, store 240 data points and 20 groups
data of each sample.
Principle of Operation:
Model
BODT-5
The instrument is designed by the
liquid containing soluble organic matter, such as
pressure-difference method, simulating
Measurable
drainage and river water
the degradation of natural organic
0-35, 0-70, 0-350, 0-700mg/L (without dilution)
matter. 21% of the oxygen in the air on
Range
700-4000 mg/L (need to dilute)
the top of Test Bottle continuously
6 Bottle Capacity: 500mL
Sample Quantity
replenish the dissolved oxygen
5%
Repeatability
consumed in water, carbon dioxide
(CO2) produced in the process of
0.1mg/L (0-35, 0-70mg/L)
Resolution
1mg/L (0-350mg/L, 0- 700mg/L)
organic matter degradation is absorbed
by Sodium hydroxide coming from sealed
350×400×350mm
Dimension
cap, pressure sensor monitor constantly
LED
Display
the pressure change of sample bottle.
AC 220 50Hz
Power Supply
There is a correlation between
Biochemical oxygen demand BOD (correspond to the consumption of oxygen in the test bottle) & Gas pressure, such
relevance is dealt with by this instrument, direct display of Biochemical oxygen demand BOD value on the screen.
423
M
Distance Laser Meter
METERS
DI-900, Distance Laser Meter, up to 70 meter
DI-900
2
1
5
6
7
DI-900
0.05M~70M
Resolution
0.001M
Accuracy
±1.5mm
Measuring Speed
0.5 sec.
Laser Type
650 nm, Class 2, <1mW
Beam Size
[email protected]
Battery
AA Batteries x 2
Battery Life
10,000 measures
Dimension
110mm x 45mm x 30mm
IP Protection
IP52
Operation Temperature
-5°C ~ 40°C
Storage Temperature
-20°C~60°C
3
4
Model
Measuring Range
Automatic Power-Off
Yes
Laser
30 seconds
Device
180 seconds
Countdown Measure
3~15 seconds, selectable
The working range and accuracy is depending on how well the laser light
is reflected from the surface of the target and with increased brightened
of the laser point to the ambient light.
Accessories:
1. Carrying Case x 1
2. DI-900 Series x 1
3. Silica-gel Protector x 1
4. AA Batteries x 2
5. Safety Strap x 1
6. Engineering Pencil x 1
7. Operation Manual x 1
New Engine,
New Age,
New Possibility-SX10
Dyna Measurement
Stake out measuring
Our new measuring
engine-SX10 based on
own ASIC system, bring
a 150% faster
measuring speed and
125% more accuracy
to you.
With SX10, a totally
new experience of
measuring is arrived
to you, fast response,
easy to seeking correct
points. Finding.
Lazy finding sections?
try stake-out with
DI-900, simply set stake
up & HANS will guiding
you during whole
measure
(dyna-measuring).
LED Backlight
424
Three Indirect
measurements
Area and Space
calculations
Thanks to Pythagorean,
we could get height
without be there.
Now activate indirect measuring mode
with DI-900, enjoy the
wisdom from the past.
and do not forget it
could help to
calculate when you
need it.
with alert and
direction With DI-900,
do not worried about
how large it is, how
depth it is, just
pressing your buttons
and follow instruction
on screen, you could
even simply calculate
your results, try it today!
Force
M
METERS
FG-5000A/FG-20KG, Force Gauge, 5000gram/20Kg
Wide capacity, high resolution, high accuracy, high repeatability.
3 kind display unit.
Tension & compression capability.
Peak hold (Max. load) can be held in display during
make tension or compression measurement.
Zero button can operate both for normal measuring
& the "peak hold" operation.
Full capacity zero (tare) control capability.
Fast/Slow response time push button.
Positive or reverse display direction select.
Full line accessories (adapters) are included.
Hand held & stand mounting available.
Low power consumption gives long battery life.
Build in low battery indicator.
Microprocessor circuit & exclusive load cell transducer.
Over load protection.
RS-232 computer interface (optional).
FG-20KG
Professional test stand (optional).
FG-5000A
Model
FG-5000A
FG-20KG
Display
LCD (Liquid crystal display). 5 digits, 10 mm (0.4") digit size.
Display Direction
Positive or Reverse direction, select by the push button on the front panel.
Function
Tension & Compression (Push & Pull). Normal force, Peak hold (Max. load).
Peak hold
Will freeze the display value of the Peak load (Max. load).
Zero
Zero button can be operated both for "normal force" or "peak hold" operation
Measure Capacity
5000g/176.40oz/49.03Newton
20.00Kg/44.10LB/196.10Newton
Resolution
1g/0.05oz/0.01Newton
0.01Kg/0.01LB/0.05Newton
Min. Display
3g/0.10oz/0.03Newton
0.01Kg/0.01LB/0.05Newton
Accuracy
± (0.4 % + 1 d), within 23± 5°C
± (0.5 % + 2 d), within 23± 5°C
Unit select
g/oz/Newton
Kg/LB/Newton
Update time
Fast - Approx. 0.2 second, Slow - Approx. 0.6 second.
Over range Indicator
Display show " - - - - " when in over range status.
Overload Capacity
Max. 7 kg
Max. 30 kg
Zero/tare Control
Max. full capacity.
Circuit
Exclusive microprocessor LSI-circuit.
Full Scale Deflection
Approx. 2.0 mm max.
Operating Temp.
0°C to 50°C (32°F to 122°F)
Operating Humidity
Less than 80% R.H.
Power Supply
6 x 1.5 V AA (UM-3) size battery or DC 9V adapter (not included).
Power Consumption
Approx. DC 24 mA
Transducer / Weight
Exclusive load cell / 551 g (1.2 LB)/with batteries
Dimension
227 x 83 x 39 mm (8.9 x 3.3 x 1.5 inch).
Main instrument with mounting holes are provided on the back case, easy stand
mounting
Optional, RS-232 serial computer interface
* Operating manual: 1PC * Flat-head adapter: 1 PC * Carrying case: 1 PC
* Hook adapter: 1 PC * Cone head adapter: 1 PC * Chisel head adapter: 1 PC
* 120 mm extension rod: 1 PC
* Test stand, Model: FS-1001 * Wedge grip, Model: WG-01
Mounting Holes
Data output
Accessories Included
Optional Accessories
Optional Equipment & Accessory
Test Stand
Model: FS-1001
Test stand, cooperate with Force gauge FG-20KG, FG-5000A, whole
system will be become the useful tool for material's tension &
compression analysis. Size: 630x250x230mm. Weight: 7.02 Kg (15.4 LB).
Wedge grip
Model: WG-01
Wedge grip, the optional accessory to install to the base of FS-1001
be used to hold the tested material.
Force Gauge with RS-232 Computer interface
FG-5000A/20A-RS232
All the function are same as the FG-5000A/FG-20KG but with
RS-232 computer interface.
SW-U101-WIN
Software for data logging & data recorder.
425
M
METERS
Gas O2
PO2-250, O2 Meter, Pen Type
O2 (Air oxygen) and Temp. (Air Temp.) measurement.
O2 measurement range : 0 to 30.0 % x 0.1 %.
Temp. measurement range : 0 to 50°C, °C/°F.
O2 Buzzer warning : If the measurement value < 18.0 %O2, the buzzer will
sound for warning.
Galvanic cell type for O2 sensor.
High reliability Oxygen sensor, not be affected by acidic gases like CO2.
Oxygen sensor with temperature compensated.
Data hold, to freeze the desired reading value.
Auto power off saves battery life.
Operates from DC 1.5V (UM4/AAA) x 4 PCs batteries.
Microprocessor circuit ensure high accuracy, and also provides special
functions and features.
Durable and compact ABS-plastic housing.
Application: O2 monitor/dectors, Food industrial (Refrigerator, Vegetable
factory), Bio-Technology (Oxygen incubator, Anaerobic cultivator), Security
system (Air conditioner and Oxygen shortage alarm system, Fire alarm
system), Fuel cell system.
PO2-250
Model
PO2-250
Display
LCD size : 28 mm x 19 mm.
Measurement
O2 (Air oxygen) Temperature (Air Temp.)
Sensor
Oxygen
Galvanic cell type
Temperature
Thermistor
Circuit
Custom one-chip of microprocessor LSI circuit.
Data Hold
Freeze the display reading.
Sampling Time
Approx. 1 second.
Power Off
Auto shut off saves battery life.
Operating Humidity
Less than 80% R.H.
Operating Temp.
0°C to 50°C
Power Supply
DC 1.5V battery ( UM-4/AAA ) x 4 PCs.
Power Consumption
Approx. DC 4.0 mA.
Weight
194 g/ 0.43 LB.
Dimension
180 x 40 x 40 mm (7.1" x 1.6" x 1.6")
Accessories Included
* Instruction manual: 1PC * Meter with sensing head: 1 Set
* Magnetic base: 1 PC * Soft carrying case, CA-52A: 1 PC
Application
* O2 monitoring. * Food industrial: Refrigerator, Vegetable factory
* Bio-Technology: Oxygen incubator, Anaerobic cultivator * Security system: Air
conditioner & Oxygen shortage alarm system, Fire alarm system * Fuel cell system.
O2 (Air oxygen)
Range
0 to 30 %O2.
Resolution
0.1 %O2.
Accuracy
± (1% reading + 0.2% O2). @ After calibration
Response time
≤15 seconds. @ t 90
Overload protection
100 %O2.
Environment pressure range
0.9 to 1.1 atmosphere.
Expected life time
≥2 years.
Alarm
If the measurement Air oxygen value < 18.0 %O2, the buzzer will sound for warning.
Temperature
426
Range
0°C to 50°C/32°F to 122°F
Resolution
0.1 degree
Accuracy
°C - ± 0.8°C °F - ± 1.5°F
GAS CO
M
METERS
PCO-350, CO Meter, Pen Type
Two function: CO (Carbon monoxide), Temperature.
CO range: 0 to 1,000 PPM x 1 PPM.
Temperature.: 0 to 50 °C, °C/°F
CO measurement with fast response time.
High repeatability and high accuracy.
Pen type, easy to carryout and operation.
CO function with alarm setting.
Data hold function for freezing the desired value on display.
Microprocessor circuit assures maximum possible accuracy, provides
special functions and features.
Auto shut off is available to save battery life.
Operates from DC 1.5V (UM4/AAA) x 4 PCs batteries.
Durable and compact ABS-plastic housing.
PCO-350
Model
PCO-350
Circuit
Custom one-chip of microprocessor LSI circuit.
Display
LCD size : 28 mm x 19 mm.
Measurement
CO( Carbon dioxide ), Temperature
Unit
Sensor Type
CO
PPM
Temp.
°C, °F
CO
Electrochemical
Temp.
Thermistor
Temp. Compensation
Automatic temp. compensation for CO measurement.
Alarm Setting
For CO measurement only.
Data Hold
Freeze the display reading.
Sampling Time
Approx. 1 second.
Power Off
Auto shut off saves battery life.
Zero
Build in zero button for offsetting the zero value
Operating Humidity
Less than 80% R.H.
Operating Temp.
0°C to 50°C
Power Supply
DC 1.5V battery ( UM-4/AAA ) x 4 PCs.
Power Consumption
Approx. DC 4.0 mA.
Weight
194 g/ 0.43 LB.
Dimension
180 x 40 x 40 mm (7.1" x 1.6" x 1.6")
Accessories Included
* Instruction manual: 1PC * Soft carrying case, CA-52A: 1 PC
CO (Carbon dioxide)
CO
(Carbon monoxide)
Range
0 to 1,000ppm
Resolution
1ppm
Accuracy
± (5% + 2ppm)
Response time
< 30 seconds
Repeatability
< 2%
Zero drift in long term
< 5 PPM
Sensitivity drift
< 5% per year
* The response time value is specified to reach the 90% reading value
Temperature
Range
0°C to 50°C, 32°F to 122°F
Resolution
0.1 degree
Accuracy
°C: ± 0.8°C
°F: ± 1.5°F
427
M
METERS
Gas CO2/Humidity/Temp. DataLogger
MCH-383SD, CO2/Humidity/Temp. Monitor, SD Card Real Time
Datalogger, Patent
MCH-383SD
Monitor with real time datalogger, save the measuring data along
the time information (year, month, date, hour, minute, second) into
the SD memory card and can be down load to the Excel, extra
software is no need. user can make the further data or graphic
analysis by themselves.
Show CO2 (Carbon dioxide), Humidity and Temperature value in
the same LCD.
NDIR method principal for CO2 (Carbon dioxide) measurement,
available for long term operation. high repeatability and high accuracy.
0.1 %RH resolution for the humidity reading, 0.1 degree resolution
for the Temp. reading.
Used the precision capacitance type humidity sensor, professional
and high accuracy.
SD card capacity: 1 GB to 16 GB.
Large LCD display, easy readout.
Microcomputer circuit, high accuracy.
Low power consumption and long battery life when use battery power.
Power supply from AC/DC 9V adapter in.
RS232/USB computer interface.
Patented
Model
Circuit
Display
Measurement
Unit
CO2 Sensor Structure
Temp. Compensation
MCH-383SD
Custom one-chip of microprocessor LSI circuit.
LCD size : 60 mm x 50 mm
CO2 (Carbon dioxide) Humidity and Temperature
CO2: ppm, Humidity: %RH, Temp.: °C, °F
NDIR
Automatic temp. compensation for CO2 measurement.
63% reading value * Depend the environment
Response Time for CO2 measurement CO2: < 2 min. typically. * Reach the
air circulation.
5/10/30/60/120/300/600 seconds or Auto. * Default sampling time is 60 seconds. *
Datalogger Sampling
The “Auto“ sampling . means when the measuring value is changed (> ± 1 %RH or
Time Setting range
> ± 1 °C or ± 50 ppm) will save the data one time only.
0.1 % no. of total saved data typically.
Data error no.
SD memory card. 1 GB to 16 GB.
Memory Card
* SD memory card Format * Set clock time (Year/Month/Date, Hour/Minute/Sec.)
* Set sampling time * Set beeper sound ON/OFF * Set SD card Decimal character
Advanced setting 1
* Select the Temp. unit to °C or °F * Set RS232 data output ON/OFF
* Set CO2 height (meter) compensation value
Advanced setting 2
* Set CO2 height (feet) compensation value
Approx. 1 second if measuring data is changed.
Update Time of Display
RS 232/USB PC computer interface. * Connect the optional RS232
cable UPCB-02 will get the RS232 plug * Connect the optional
Data Output
USB cable USB-01 will get the USB plug.
Power Supply
* Clock backup
Power Supply
* Meter & probe
Operating Temperature
Operating Humidity
Weight
Dimension
Accessories Included
Optional Accessories
* Alkaline or heavy duty DC 1.5 V battery (UM3, AA) x 6 PCs, or equivalent
* DC 9V adapter input. (AC/DC power adapter is included)
0 to 50°C
Less than 90% R.H.
Meter
240 g/0.53 LB.
CO2 probe
158 g/0.35 LB.
Meter: 132 x 80 x 32 mm ( 5.2 x 3.1 x 1.3 inch ) ; CO2 probe: 132 x 38 x 32 mm
* Instruction manual: 1PC * CO2 probe * AC to DC 9V adapter: 1PC * Main meter
hanging unit (with sticker): 1PC * CO2 hanging unit (with sticker)
* SD card (2GB), SD-2GB * USB cable, USB-01. * RS232 cable, UPCB-02.
* Data Acquisition software, SW-U801-WIN.
Electrical Specifications (23±5°C):
CO2
Humidity
Temp.
428
Range
Resolution
0 to 4,000ppm
1 ppm
Accuracy ± 40 ppm * 1,000 ppm. ± 5% of reading * > 1,000 ppm 3,000 ppm.
± 250 ppm typically * > 3,000 ppm, reference only
Range
10 % to 90 % R.H.
Resolution
0.1 % R.H.
Accuracy
70% RH: ± (4% reading + 1% RH). < 70% RH: ± 4% RH.
Range
0°C to 50°C, 32°F to 122°F
Resolution
0.1 degree
Accuracy
°C - ± 0.8°C / °F - ± 1.5°F
Humidity in grains
M
METERS
MS-7011, Humidity Content Meter, Stainless Professional Probe,
RS232/USB Data Interface Dew Point, Type K Thermometer
Professional Humidity content probe, used to measure the humidity
content value for the materials of Grain, Corn, Rice. Cotton, Paper.
Stainless probe body, Heavy duty.
Humidity content + Dew point + Type K Thermometer are combined into
one meter, intelligent.
Thin-film capacitance sensor for humidity content measurement, high
precision.
Dew point measurement.
Type K thermometer build in temperature linearity and precision cold
junction compensation circuit, high accuracy.
Microprocessor circuit assures maximum possible accuracy, provides
special functions and features.
Large LCD with two display, show the humidity content & temperature
values at same time.
Heavy duty & compact housing case, designed for easy carry out &
operation.
Records Maximum and Minimum readings with Recall.
Auto shut off saves battery life.
Data hold function for freezing the desired value on display.
RS232/USB computer interface.
°C, °F conversion is selected by push button on front panel easily.
Built-in low battery indicator.
MS-7011
Model
Circuit
Display
Measurement
Sensor Type
Data Hold
Memory Recall
Sampling Time
Power off
Data Output
Operating Humidity
Operating Temp.
Power Supply
Power Consumption
Weight
Dimension
Accessories Included
Optional Accessories
Electrical specifications ( 23±5°C)
Humidity Content
Range
Humidity Resolution
content
Temp.
Accuracy
Range
Resolution
Accuracy
Dew Point
10 to 95%RH
0.1%RH
70%RH: ± (3% reading + 1%RH)
< 70%RH: ± 3%RH.
0°C to 50°C, 32°F to 122°F
0.1 degree
°C: ± 0.8°C
°F: ± 1.5°F
Type K Thermometer
°C
°F
Range
Resolution
Accuracy
Range
Resolution
Accuracy
-100.0°C to 1300.0°C
0.1%°C
-50.0°C to 1300.0°C: ± (0.2 % + 0.5°C)
-50.0°C to 100.0°C: ± (0.2 % + 1°C)
-148.0°F to 2372.0°F
0.1°F
-58.0°F to 2372.0°F: ± (0.2 % + 1°F)
-58.1°F to 148.0°F: ± (0.2 % + 1.8°F)
Range
Resolution
Range
Resolution
-25.3°C to 48.9°C
0.1°C
-13.5°F to 120.1°F
°F
0.1°F
Remark: * Dew Point display value is calculated from
the Humidity/Temp. measurement automatically. * The
Dew Point accuracy is sum accuracy value of Humidity
& Temperature measurement.
°C
MS-7011
Custom one-chip of microprocessor LSI circuit.
51 mm x 32 mm, 15 mm (0.6") digit size. dual function LCD display.
Humidity content: %RH (Relative Humidity) Temperature - °C, °F
Dew point: °C, °F
Type K thermometer: °C, °F
Humidity Content : Humidity: High precision thin-film capacitance sensor.
Temp.: Thermistor; Type K thermometer: Thermocouple probe.
Freeze the display reading by push button.
Maximum & Minimum value.
Approx. 0.8 second.
Auto shut off saves battery life or manual off by push button.
RS 232/USB PC computer interface.
Connect the optional RS232 cable UPCB-02 will get the RS232 plug.
Connect the optional USB cable USB-01 will get the USB plug.
Main instrument : Less than 80%RH. Probe : Less than 95%RH.
0°C to 50°C
006P DC 9V battery (Alkaline or Heavy duty type).
Approx. DC 7.0 mA.
Meter: 245 g/ 0.54 LB.
Probe: 461 g/ 1.01 LB.
Meter: 195 x 68 x 30mm (7.6 x 2.6 x 1.2 inch).
Humidity Content Probe: Probe length : 600mm. Probe head diameter: 10mm.
Cable length: 1.5meters
* Instruction manual: 1PC * Humidity content probe, MS-71P: 1 Set * Instruction
Manual: 1PC * Soft carrying case, CA-52A: 1 PC
* Probe sensing head with inner filter, MS71HEAD. * RS232 cable, UPCB-02.
* USB cable, USB-01. * Data Acquisition software, SW-U801-WIN.
* Type k thermocouple Probe: Model : TP-01, TP-02A, TP-03, TP-04.
429
M
METERS
Humidity in Soil
PMS-714, Soil Moisture Meter
Designed to check the moisture level of soil or other similar material.
Measurement range : 0 % to 50 % moisture content of soil sample with 0.1%
resolution.
All in one digital soil meter, easy to make operation.
Data hold function to freeze the desired value on display.
Microprocessor circuit ensures high accuracy and provides special
functions and features.
Operates from DC 1.5V (UM4/AAA) x 4 PCs batteries.
Built-in low battery indicator.
Durable, long-lasting components, enclosed in strong, compact
ABS-plastic housing.
PMS-714
Model
Applications
Designed to check the moisture level of soil or other similar material.
PMS-714
Measuring Principal
Used the 2 pins electrode to measure the conductive ability of the species, then
converter to the reading of “ % “ Moisture content “ of soil sample.
Display
Measurement Range
Resolution
Accuracy
Circuit Probe
Data Hold
Sampling Time
Operating Humidity
Operating Temp.
Power Supply
Power Current
Weight
LCD size : 28 mm x 19 mm.
0 % to 50 % moisture content on soil.
0.1%
± (5% + 5d) F.S. @ 23± 5°C, F.S. : full scale.
Custom one-chip of microprocessor LSI circuit. 2 pins moisture electrode.
Freeze the display reading.
Approx. 0.8 second.
Less than 80% R.H.
0°C to 50°C
DC 1.5V battery ( UM-4/AAA ) x 4 PCs.
Approx. DC 12 mA.
267 g/ 0.58 LB. @ Battery is included.
Meter body: 172 x 40 x 40 mm (6.8" x 1.6" x 1.6").
Dimension
Probe body: 220 mm x Dia. 10 mm (8.7" x Dia. 0.4").
Total length (meter + probe): 392 mm (15.4").
Accessories Included
Optional Accessories
* Instruction manual: 1PC
Hard carrying case, CA-06.
445703, Big Digit Hygro-Thermometer Wall Mount
Large 1" Digits on Dual LCD, Display Humidity and Temperature
1” digits displayed on Large LCD (3.1 x 2.4”/80 x 62mm) provide simultaneous measurements of humidity & temp.
Memory with reset function stores maximum and minimum measurements
Measuring range:
Temperature 14 to 140°F (-10 to 60°C)
Humidity 10% to 99% RH
Accurate to 5% RH, 1°C, and 1.8°F (@ 0 to 50°C/32 to 122°F)
°C/°F switchable temperature measurements
Low battery indication
Dimensions: 4.3 x 3.9 x 0.78” (110 x 100 x 20mm)
Weight 6oz (169g)
Complete with built-in tilt stand, wall mounting bracket, and 1.5V AAA
battery.
Applications:
Use in factories, greenhouses and offices to maintain proper temperature
and humidity conditions and to record extremes during the day.
430
445703
Model
445703
Humidity range
10 to 99%RH
Basic RH accuracy
± 5% (25 to 80%)
Temperature range
14 to 140°F (-10 to 60°C)
Basic Temperature Accuracy
± 1.8F/1°C (14 to 122°F)
Dimensions
4.3 x 3.9 x 0.78”(109 x 99 x 20mm)
Weight
6oz (169g)
Humidity/Temperature DataLogger
M
METERS
8808, BenchTop Large Display Temp. + RH% DataLogger
8808
Model
8808
Air Temp. Range
-20 ~ 70OC
Air Temp. Resolution
0.1OC/OF
Air Temp. Accuracy
±0.6 C (0 ~ 50OC), others ±1.2OC
Humidity range
0%RH ~ 100%RH
O
Humidity resolution
0.1%RH
Humidity accuracy
±3%RH (at 25 C, 10 ~ 90%RH, others ±5%RH)
Sampling points
16000
Button to on/off
Yes
Battery life time
>3 Months
LCD size (mm)
51(H) x 63(W)mm
Operating temp.
0-50OC
O
Wall mountable super large display for
Humidity <80%
Operating RH%
easy reading and save space
Air temp., dew point temp.& rh% display
-20 ~ 50°C
Storage temp.
Tripod mountable receptacle for long
Humidity <90%
Storage
RH%
time use.
Detachable standers to transform as
120x93x42(H) mm
Dimension(mm)
desktop.
~ 200g
Weight
Recording temp. & humidity for quality
AA bat.x4pcs or 9VDC adaptor
Battery
control.
Button and pc programing are both
Meter/Batteries
or adaptor/Manual/Paper box/
Standard Package
USB Cable+Software CD
available.
Several methods to start recording:
RH calibration salt kit
Optional Accessory
schedule/immediately start/key start/
repeat Recording function must be powered by adaptor Monitoring mode is powered by battery or dc adaptor
Built in usb interface for program & down load Led flash& audible warning while exceeding threshold Up to 16000
points memories Temperature units switchable Salt bottle self-calibration available Features: lcd display/date &
time display.
DlogMate-375, Portable Temp./Humidity DataLogger With LCD
DlogMate-375
Model
DlogMate-375
Air Temp. Range
-20 ~ 70OC
Air Temp. Resolution
0.1OC/OF
Air Temp. Accuracy
±0.6 C (0 ~ 50OC), others ±1.2OC
Humidity range
0%RH ~ 100%RH
O
Humidity resolution
0.1%RH
Humidity accuracy
±3%RH (at 25 C, 10 ~ 90%RH, others ±5%RH)
Sampling points
16000
Button to on/off
Yes
Battery life time
>3 Months
O
LCD size (mm)
20(H) x 40(W)mm
Operating temp.
0-50OC
Operating RH%
Humidity <80%
-20 ~ 50°C
Storage temp.
Recording temp. and humidity via
external probe for quality control.
Humidity <90%
Storage RH%
Several methods to start recording:
90x60x26.5(H) mm
Dimension(mm)
schedule/immediately/repeat/on line/
key start.
~ 100g
Weight
2 ways to program & down load:
ER3
x 1pc
Battery
- via pc: RS232 or usb cable
- via logger printer 9801: this is a 3
Meter/Probe/Battery/Manual/Paper box/USB
Standard Package
Cable+Software
function in 1 printer for programing &
download.
Probe/Software & cable kit 19801 printer
Optional Accessory
Yellow recording led indicator.
Red led flash while exceeding threshold Can be used as regular temp. & humidity monitor while setting as
non-sleep after recording Up to 16000 points memories Powered by lithium battery with long life time Low battery
indicator.
431
M
METERS
Humidity/Temperature/Dataloggers
D-LogMate-2TCK, 2 Channels, K Thermocouple Datalogger
Monitors temp. 2 separate type K, thermocouple to store measure High temp. measurement 5 start modes to
activate logger’s recording (immediate, schedule, on-line, key start, repeat) LCD displaying data being stored &
viewing current recording status.
Model
D-LogMate-2TCK
Range
-200~1370°C/-328-2498°F
Power bat.
3.6V Lithium battery (ER3)
Accuracy
±0.3%rdg±0.7°C(1.3°F)
Resolution
0.1°C/°F
Bat. low display
"BAT" icon display
Sample rate
16000
LCD display
SIZE: 20x40 mm
Dimensions(mm)
90x60x26.5 (H)
Optional
accessory
USB Converter with cable &
connector (RS232 to USB)
LED signal
Red (HI,LO Alarm)/Yellow(Record)
2TCK
Features:
Pressing Start/Stop button to activate logger.
Features contacting measurement versatile K type sensors.
Output: Big LCD display, RS232 interface connection to PC or uses USB converter to connect to USB port.
Memory capacity : Total 16,000 points. K type : Dual K sensor inputs T1 and T2.
Sample rate: User defined : From 1 second to 2 hours. Standards: CE and Rohs/WEEE compliance.
D-LogMate Series, Temperature & Temperature Humidity Dataloggers
D LOGMATE-T
Model 1T is without display.
Up to 8000 readings.
Wide operating
range: Temp.: -40 to 85°C.
Model
D LOGMATE-TD
Up to 8000 readings.
View temp. on LCD display.
Wide operating
range: Temp.: -40 to 85°C.
D LogMate TD
D LogMate THD
Temp. range
Humidity range
-40~85°C/-40~185°C
N/A
Power bat.
Accuracy
D LOGMATE-THD
Up to 16,000 readings.
(8000 readings for each parameter).
View temp. & Humidity on LCD
display.
Wide operating range: Humidity:
0 to 100% RH, Temp.: -40 to 85°C.
0~100% RH
ER3 or CR2 lithium battery x1
Temp. ±0.6°C(-20~50°C)
±1.2°C(-40~20°C, 51~85°C)
Temp. ±0.6°C(-20~50°C)
±1.2°C(-40~20°C, 51~85°C), Humidity: ±3%RH
Bat. low display
“Lo” display
Sample data
Up to 16000
LCD display
Size: 12x25.5mm
Housing
Waterproof
Dimensions (mm)
L124xW92xT37 (Interface), L80xW55xT22, L124xW92 (Complete set)
LED signal
Red (hi,lo alarm)/yellow (record)
Resolution
0.1°C(0.1°F)
Cable length
150cm with DB9 connector
432
Humidity / temperature Recorders
M
METERS
CR4-KTH, Humidity / Temperature Recorder
The CR4 six (6) inch Universal Chart Recorder offers the ultimate in flexibility. Choose one of 5 sensors for your
application, connect it to the CR4 Universal Recorder, make desired speed selection and start recording.
When your application calls for a different sensor, just change probes for the same recorder.
Model
CR4-KTH
Features:
Automatic Probe recognition
Front panel touch pad
Real Time data view
Battery backup
Field replaceable probes
Field calibration of probes
Independent Channel Alarms
Temperature and Humidity Probe.
CR4-KTH
Chart Diameter
6 inches
Chart Rotation Mode
Continuous or Single turn
Chart Rotation Speed
1.5, 3, 6, 12 & 24 hrs, 7 & 31 days
Chart Speed Accuracy
±1%
Charts
60 assorted included
Display
LCD (2 line)
Temperature alarm Range
-20°F to 120°F (-30°C to 50°C)
Relative Humidity alarm Range
0 to 100%
Pressure Alarm Range
0 to 500 PSI ( 0 to 35 Bar)
Alarm Delay
NO DELAY, 10 mins., 30 mins., 1 hr. or 2 hrs.
Remote Alarm Connection
NO, 48 VAC/DC, 0.1 A resistive load
Operating Temperature
32°F to 120°F (0°C to 49°C)
Primary Power
115 VAC, 50/60 Hz
(230 VAC, 50/60 Hz optional)
Alternate Power
12 V vehicle operation
(need optional adapter)
Battery backup
8 AA alkaline batteries
Battery Life
48 hrs. continuous
Temperature Recorders
The CR87 Six(6) Inch Chart Recorder Series set the standard for reliable and rugged trend reporting.
Choose the right model for your application.
Common Features: Micro-controller design Large LED Display Front Panel controls Single or continuous chart
rotation Choose from 120V or 220V models (see chart) Battery Backup 12 V operation Comes with 2 cartridge
pens & 60 (6” dia.) assorted charts Convenient folding handle Snap-on support legs Free standing or wall mount.
CR87B220C, Temperature Recorder, -40°C to +50°C
Applications:
Designed for Refrigerators/Freezers, Laboratory and Environmental
Applications
Measures and records temperature in air, gas, liquids, powders, solids, and
semi-solids.
Features:
Temperature range: -40°F to 120°F (-40°C to 50°C)
Remote readings from up to 100ft. (optional sensor wire p/n CABLE10T)
Programmable speed and temperature ranges.
CR87B220C
CR87HT220C, High Temperature Recorder, 0°C to +500°C
Applications:
Broad range of Temperature Applications
Measures and records temperature in air, gas, liquids, powders, solids, and
semi-solids.
Features:
Temperature range: 0°F to 1000°F (0°C to 500°C)
Remote readings from up to 2000ft.
Programmable speed and temperature ranges.
CR87HT220C
433
M
METERS
Light/Anemometer
TES-1332A, Light Meter
TES-1332A
Model
Display
Measuring Range
Over range Display
Resolution
Accuracy
Spectral Sensitivity close to CIE photo
pic Curve.
Cosine Angular corrected.
Analog output jack for recording.
Data Hold function.
TES-1332A
3 1/2 digit LCD
200/2000/20000/200000 Lux (1332A)
20000 lux-reading x 10, 200000 lux-reading x 100
Highest digit of (1) is displayed
0.01 Lux(1330A) & 0.1 Lux
± 3% rdg ± 0.5% f.s. (<10,000 lux)
± 4% rdg ± 10dgts (>10,000 lux)
(calibrated to standard incandescent lamp, 2856 K)
±2%
Repeatability
±0.1%°C
Temperature Characteristics
Approx. 2 times/sec.
Measuring Rate
DC 2V/f.s. (full scale) (TES-1332A)
Recorder Output
0°C to 40°C (32°F to 104°F) < 70% R.H.
Operating Temp. & Humidity
one 9V battery
Power Source
100mm(L) x 60mm(W) x 27mm(H)
Dimensions
135mm(L) x 72mm(W) x 33mm(H)
Dimension
250g
Weight
Carrying case, 9V battery & Instruction Manual
Accessories
8910, Air Flow & Barometric Pressure Meter
8910
Measurements
Wind speed Range
Wind speed accuracy
Air temp. range
Air temp. resolution
Air temp. accuracy
Air RH% range
Air RH% resolution
Air RH% accuracy
Pressure range
Pressure resolution
Pressure accuracy
Altitude range & res.
Altitude/Pressure update
Wind speed response time
Temp. response time
Air RH% response time
Pressure response time
LCD update
Windchill display
Dew point temp. display
Heat index display
Altitude display
LCD size
Operating temp. / RH%
Storage temp. / RH%
Dimension(mm) / Weight
Battery
Standard Package
434
Small pocket knife shape & compact design
Measures air velocity ,temp., humidity, windchill temp., dew point temp.,
barometric pressure, heat index and altitude
Barometric pressure history bar chart display
Wind units selectable: knt (knot), bf (beaufort),
fpm (feet per minute), mph(mile per hour), ms (meter per second), kmh
(kilometer per hour)
Temp. units °c/of selectable
Barometric pressure in hg, mbar, hpa selectable
Display max. & avg. wind speed and quick response
Easy to operate by only two buttons
Auto power off to save power
Tripod mountable receptacle.
Range
0.5-44.7M/H, 60-3937FT/M, 0.4-3B.BKNT,
1.1-20.0M/S, 0.7-72.0KMH, 1-BBF
±4% of rdg. or last significant digit (whichever is greater)
-15-50.0°C
0.1°C/°F
±1°C
5%RH 95%RH
0.1%RH
±3%RH(at 25°C, 10-90%RH, others ±5%RH)
400 ~ 1100mbar
1 (400-1100mbar/hPa), 0.1 (11.B-32. 5 in Hg)
±3hPa (at-10-60°C)
-600-7000M (1 M), -900-9000Ft (3 Ft)
60 seconds
averaging every 2 seconds
60 seconds (typical)
60 seconds (typical)
15 minute (typical)
every second
Yes
Yes
Yes
Yes
16(H)x2B(W)mm
-15 ~ 50°C / Humidity <80%
-10 ~ 50°C / Humidity <90%
150x55x25 (90°folded); 235x55x25 (180°full opened) / ~ 90g
CR2032 x 1 pc
Meter/Battery/Manual/Strap/Paper box
Moisture
M
METERS
MS-7003, Moisture Meter, All in One, Bar Graph LED + LCD
Designed to check the moisture level of wood, concrete, and other
non-wood material.
6 % to 40 % moisture range on wood.
0 to 100% relative moisture value for Concrete and other non-wood
material.
Red LED bar graph indicator and LCD digital display.
All in one, meter build in the test pins.
Optional separate probe, available for remote measurement.
Microprocessor circuit assures maximum possible accuracy, provides
special functions and features.
Records Maximum & Minimum reading with recall.
Data hold function to freeze the desired value on display.
Heavy duty & compact housing case, designed for easy carry out and
operation.
Built-in low battery indicator.
With auto power shut off function to prolong the battery battery life.
MS-7003
Model
MS-7003
Applications
Designed to check the moisture level of wood, concrete and
other non-wood material.
Principal
Used the 2 pins electrode to measure the conductive ability of the species,
then converter to the reading of % "Moisture of Content".
Circuit
Custom one-chip of microprocessor LSI circuit.
Display
LCD size: 51 mm x 37 mm, Digit size: 16 mm (0.62")
Material/Range
Material 1: 0 to 100% relative moisture value for Concrete. and
other non-wood material.
Material 2: 6 % to 40 % moisture range on wood.
Resolution
0.1 %.
Accuracy
± (5% + 5d) @ 23 ± 5°c @ Material 1: 13% to 100% @ Material 2: 6 % to 40%
Probe
2 pins moisture electrode.
Data Hold
By push button on front panel.
Memory Recall
Records Maximum & Minimum reading value.
Sampling Time
Approx. 0.8 second.
Operating Humidity
Less than 80% R.H.
Operating Temp.
0°C to 50°C
Power Supply
Alkaline 006P, MN1604 (PP3) DC 9V battery.
Power Current
Approx. DC 16 mA.
Weight
251 g/0.55 LB.
Dimension
216.5 x 68.5 x 29.7 mm (8.4 x 2.7 x 1.2 inch).
Accessories Included
* Instruction manual: 1PC * Extra contact pins: 1 Set
Optional Accessories
* Separate Probe, MP-31 * Hard Carrying Case, CA-06
* Soft Carrying Case, CA-05A
435
M
Pressure
METERS
PS-9302
+PS100-10BAR
Model
Circuit
Display
Display units
Accuracy
Pressure transducer
Zero adjust
Span adjust
Transducer mV input signal
Exciting output power supply
Data hold
Data record
Power Off
Data Output
Sampling Time
Data Output
Operating Humidity
Operating Temp.
Power Supply
Power Current
Weight
Dimension
Standard Accessories
optional Accessories
Description
Optional Pressure
Sensors Models
436
PS-9302, Pressure Meter
Meter can cooperate with 2, 5, 10, 20, 50, 100, 400 bar sensor, new
calibration are not necessary when change the new sensor. When
change the new pressure sensor, just select pressure type (2, 5, 10, 20,
50, 100, 400 bar) on the front panel button. The sensor type will memorize
into the circuit permanently by EEPROM. 8 kind pressure units (bar, psi, Kg/
cm2 mm/Hg, inch/Hg, meter/H20, inch/H20, Atmosphere) select by push
button on the front panel. Optional full line pressure sensor (2, 5, 10, 20,
50, 100, 400 bar) are available Auto shut off saves battery life. 4 pin DIN
socket, 2 pins to provide DC 5 V exciting voltage (power supply) to
pressure transducer, another two pins for accept transducer signal of 100mV
full scale. Zero button on the front panel, easy adjust the zero value of
pressure sensor. Push button gain adjustment, usage for calibration
precisely if necessary. Separate pressure sensor, easy operation. & remote
measurement. Microprocessor circuit assures maximum possible accuracy,
provides special functions and features. Super large LCD display with
contrast adjustment for best viewing angle. Records maximum & minimum
readings with recall. Data Hold function for stored the desired value on
display. Built-in low battery indicator. RS232/USB PC serial interface, can
match the personal computer used as the Datalogger, Pressure Recorder
and other modern pressure measuring system.
PS-9302
Microprocessor LSI circuit.
61 mm x 34 mm supper large LCD display. 15 mm (0.6") digit size.
bar, psi, Kg/cm^2, mm/Hg, inch Hg, meter H2O, inch H2O, Atmosphere.
± (0.5% + 1d) * Under the signal from the sensor is at full scale (100 mV).
* Meter only. * Within 23°C± 5°C
Optional, exciting voltage DC 5V, Sensor max. range output is DC 100 mV.
Push button on the front panel.
Push button gain adjustment, usage for calibration precisely if necessary.
Approx 100 mV (Full Scale).
DC 5 V.
By push button.
Records Maximum & Minimum readings.
Auto shut off saves battery life, or manual off by push button.
RS 232 PC serial interface.
Approx. 0.8 second.
RS 232/USB PC serial interface.
Less than 80% R.H.
0°C to 50°C (32°F to 122°F)
006P DC 9V battery (heavy duty).
Approx. DC 8.5 mA.
345 g/0.76 LB
180 x 72 x 32 mm (7.1 x 2.8 x 1.3 inch).
* Instruction manual: 1PC
* Pressure sensor, PS100-xxBAR refer to the bottom description.
* Hard Carrying case (CA-06): 1PC * Data acquisition software , SW-U801-WIN
* RS232 cable, UPCB-01 * USB cable, USB-01
* Optional, pressure sensor that cooperate with PS-9302.
* Out put : 100 mV DC for full scale.
* 4 pin DIN plug, 2 pins to accept DC 5 V exciting voltage (power supply) for
pressure transducer, another two pins for output signal of 100mV full scale.
Size : 30 mm dia. x 85 mm. Weight: 160 g.
Pressure Port Connector : PS 1/4" (19 teeth per inch) or 1/4" NPT
* Included one adapter connector that convert the 1/4" NPT to 1/4 " PS.
2 bar sensor PS100-2BAR
5 bar sensor PS100-5BAR
10 bar sensor PS100-10BAR
20 bar sensor PS100-20BAR
50 bar sensor PS100-50BAR
100 bar sensor PS100-100BAR
400 bar sensor PS100-400BAR
Radiation RF
M
METERS
EMF-819, 3 Axis Radio Frequency Electromagnetic Field Meter,
50 MHz to 3 GHz, General Purpose
3 Axis probe.
Radio frequency electromagnetic field tester.
Wide measuring frequency ranges, 50 MHz to 3 GHz.
EMF-819 is used for broadband devices of monitoring the wide range
radio frequency electromagnetic field value.
For precision measurement consideration, the meter is included
one probe: EP-05H (High frequency Probe, 50 MHz to 3 GHz)
Unit : V/m, W/m^2, mW/cm^2.
Frequency team selection : two points, Normal, 2.45 GHz.
Alarm setting function can warn the user if the measuring antenna is too
near the strong radiation sources, the buzzer will sound to remind the user.
Peak hold function to latch peak value.
Data hold function to lock the current reading.
RS232 computer interface.
Hard carrying case is included.
Large size LCD with contrast adjustment, which can fit best viewing angle.
Microcomputer circuit provides special function & offers high accuracy.
Powered by 006P DC 9V battery or DC 9V adapter.
EMF-819
Applications: This meter is specially developed for measuring or monitoring electromagnetic field, for example:
cell-phone station, hospital equipment, radar, micro-wave oven, radiation work, TV antenna, Radio station, welding
equipment, baking - equipment, television, computer, factory, laboratory, and other environment etc.
Model
Circuit
Display
Measurement Unit
Accuracy
Probe structure
Probe Input Impedance
Sensor Structure
Frequency Team Selection
Data Hold
REC Function
Power off
Peak Hold
Alarm Setting
Sampling Time
Low Battery Indicator
Data Output
Operating Temperature
Operating Humidity
Power Supply
Power Current
Weight
Dimension
Accessories Included
Optional Accessories
EMF-819
Custom one-chip of microprocessor LSI circuit.
LCD size : 58 mm x 34 mm
V/m, mW/cm^2, W/m^2.
< 2 dB.
3 Axis.
50 OHM
Semiconductor
Two points selection : Normal, 2.45 GHz.
Freeze the display reading.
Record Maximum & Minimum value.
Auto shut off saves battery life or manual off by push button. * Can default auto
power off or manual power off. * When default auto power off, power will off
automatically after 10 min. if no button be pressed.
To latch the peak measurement value.
Buzzer will sound when display over the setting value.
Approx. 1 second.
When display show Low battery Indicator, it should change the batteries.
RS 232 PC serial interface.
0 to 50°C.
Less than 80% R.H.
DC 9 V battery (006P) * Heavy duty or Alkaline type.
DC 9V adapter input.
Approx. DC 5.95 mA
425 g/ 0.94 LB.
Main instrument: 200.0x76.2x36.8mm Probe: 70mm (diameter) x240mm (length)
* Instruction manual: 1 PC * EP-05H Probe: 1 PC * Memory card for EP-05H: 1 PC
* Hard Carrying case: 1 PC * DC 9V power adapter: m1 PC
* RS232 cable, UPCB-02 * USB cable, USB-01 * Data Acquisition software, SW-U801-WIN
Electrical Specifications (23±5°C):
Strength Range
Resolution
0 to 200.00 V/m
0.01 V/m
Effective Value
> 1 V/m
0 to 99.999 W/m^2
0.001 W/m^2
> 0.03 W/m^2
0 to 9.9999 mW/cm^2
0.0001 mW/cm^2
> 0.0003 mW/cm^2
Frequency Range
Accuracy
Test Point
* 50 MHz to 3 GHz
< 2 dB *
60 V/m
Remark: The above accuracy is specified base on the measurement frequency within 100 MHz to 2.5 GHz.
If measurement is on other frequency range (below 100 MHz and over 2.5 GHz), the reading value just for reference only.
* The default selection is “Normal“, however if the measurement frequency is microwave or its frequency is near
“2.45 GHz“, it should select to ” 2.45 GHz “ will get the high precision.
437
M
METERS
Radiation RF
Safety Instructions
Danger
For worker’s safety, be aware that persons with electromagnetic implant (e.g. cardiac-pacemaker) are
subject to especial danger in some case.
Particular to observe the local safety regulations of the operator of the equipment.
Before using the device, it need to know that how to setting “alarm-limit“ value.
Attention
General public
Claims by some scientists that long
Frequency range
e-field strength (V/m)
term exposure to electromagnetic field
may be the cause of childhood
10 to 400 MHz
28
leukemia & other forms of cancer.
Complete answers to any of these and
400 to 2000 MHz
1.375 x f^1/2
related questions are not currently
2 to 300 GHz
61
available. At the present time the most
common practice is to avoid excess
Occupational
exposure over long period of time.
Complete answers to any of these and
Frequency range
e-field strength (V/m)
related ”Prudent Avoidance“ as stated
10 to 400 MHz
61
by the Environmental Protection
Agency(EPA) USA is recommended.
400 to 2000 MHz
3 x f^1/2
According to ICNIRP of reference
levels to time-varying electromagnetic
2 to 300 GHz
137
fields, The E-field strength levels are:
METERS
Geiger, Beta Gamma Radiation
TM-92, Radiation Monitor
TM-92 is easy to use for personal use in homes and offices, and can detect
objects that have been polluted by beta or gamma active radioactive
nuclides.
The TM-92 Radiation Monitor is a survey meter measuring the beta, gamma
and x-ray radiation. It is useful in monitoring the environment, home safety,
nuclear, medical, mining and metal industries. It is also ideal for border
control, customs and cargo inspections.
The values in μ Sv/h, μ Rem/h or mRemh are displayed on LCD screen
Features:
Built-in a GM tube.
Quick response to the radiation strength of Beta and Gamma ray.
Auto Ranging.
Alarm Settings
Automatic detection, easy setting.
Low battery indication.
Bright LCD display for night or day operation.
A beeper chirps with each radiation count.
Audio alarm set function.
Display units in uSv/h, uRem/h and mRem/h.
TM-92
Model
Display
3 1/2 digit LCD
Resolution
0.1 uSv/h ~199.9 uSv/h
0.01 mRem/h~19.99 mRem/h
0.1 uSv/h
0.01 mRem/h
Display Range
438
TM-92
Test Radiation
Beta(B) & Gamma(y) ray
Energy dependency
0.1 to 1.25 Mev
Accuracy
±15% of reading
Operation Environment
0ºC~50ºC ; below 80% RH
Storage Environment
-20ºC~60ºC ; below 75% RH
Battery Type
006P 9V
Battery Life
about 50 hour
Dimension
143 x74 x34mm
Weight
220g
Sound
M
METERS
SL-4030, Sound Level Meter, Mini Pocket Type, IEC 61672 Class 2
Large LCD display, easy to read.
Time weighting and frequency weighting meet, IEC 61672 class 2.
A & C weighting networks are conformity to standards.
0.5" standard out size of the microphone.
Time weighting (Fast & Slow) dynamic characteristic modes.
AC / DC output for system expansion.
External calibration VR.
Condenser microphone for high accuracy & long-term stability.
MAX. HOLD function for stored the maximum value.
Warning indicator for over and under load.
Low battery indicator.
LCD display for low power consumption & clear read-out even in
bright ambient light condition.
Used the durable, long-lasting components, including a strong,
light weight ABS-plastic housing case.
Pocket and light weight design allow one hand operation.
Power by 006P DC 9V battery or DC 9V adapter.
SL-4030
Model
SL-4030
Display
LCD size: 49 mm x 25.5 mm, Digit size: 21.7 mm x 8.8 mm.
Measurement Range
A Weighting- 3 ranges, 30 to 130 dB. C Weighting- 3 ranges, 30 to 130 dB.
Resolution
0.1 dB.
Function
dB (A & C weighting), Time weighting (Fast, Slow), Max. hold, AC output, DC output.
Accuracy
(23± 5°C )
Frequency weighting meet IEC 61672 class 2, calibrating input signal on
94 dB (31.5 Hz to 8 kHz), the accuracy of frequency weighting is specified as following:
31.5 Hz - ± 3.5 dB; 63 Hz - ± 2.5 dB; 125 Hz - ± 2.0 dB; 250 Hz - ± 1.9 dB;
500 Hz - ± 1.9 dB; 1 kHz - ± 1.4 dB; 2 kHz - ± 2.6 dB; 4 kHz - ± 3.6 dB; 8 kHz - ± 5.6 dB.
Frequency
31.5 to 8,000 Hz.
Microphone Type
Electric condenser microphone.
Microphone Size
Out size, 12.7 mm Dia. (0.5 inch).
Weighting Network
Characteristics of A & C.
Range selector
ranges (30 to 80dB, 50 to 100dB, 80 to 130dB).
* 50 dB on each step, * with over/under range indicating.
Fast - t= 200 ms, Slow - t = 500 ms
* "Fast" range is simulated the human ear response time.
* "Slow" range is easy to get the avg. values of vibration sound level.
* The "Fast" & "Slow" response range are designed to meet IEC 61672 class 2
requirement.
Time weighting
(Fast, Slow)
Calibrator
B & K (Bruel & kjaer), Multifunction Acoustic Calibrator 4226.
Output Signal
Output terminal
AC output - AC 0.5 Vrms corresponding to each range step.
DC output - DC 0.3 to 1.3 VDC, 10 mV / per dB. Output impedance - 600 ohm.
3.5 mm dia. phone output terminal is provided for connection with analyzer,
level recorder, tape recorder.
Operating Temp.
0 to 50 °C
Operating Humidity
Less than 80% R.H.
Power Supply
006P DC 9V battery (heavy duty type) or DC 9V adapter input.
Power Consumption
Approx. DC 10 mA.
Weight
213 g/0.5 LB.
Dimension
200 x 69 x 28 mm (7.9x2.7x1.4 inch).
Accessories Included
* Instruction manual: 1PC
Optional Accessories
* Sound calibrator (94dB), SC-941. * Sound calibrator (94/114dB), SC-942.
* Wind shield ball, SB-01 * AC to DC 9V adapter.
439
M
METERS
Tachometer
DT-2236, Digital Tachometer, Photo/Contact
World's patent, Multi-functions, one instrument combine Photo Tach.
(RPM) & Contact Tach. (RPM, m/min., ft/min.).
Wide measuring range from 0.5 to 100,000 RPM.
0.1 RPM resolution for the measured value < 1000 RPM.
High precision with 0.05% accuracy.
The last value, max., value, min. value will be stored into the memory
automatically & can be obtained by pressing MEMORY CALL BUTTON.
High visible LCD display gives RPM reading exactly with no guessing
or errors & saves battery energy.
This tachometer used the exclusive one chip MICRO-COMPUTER LSI circuit
and crystal time base, offer the high accurate measurement and fast
sampling time.
The use of durable, long lasting components, including a strong, light
weight ABS plastic housing, assures almost maintenance free performance
for many years.
The housing cabinet has been carefully shaped to fit comfortable in either
hand.
DT-2236
Model
DT-2236
Photo Tachometer: 5 to 99,999 RPM.
Measurement & Range
Contact Tachometer: 0.5 to 19,999 RPM.
Surface Speed: m/min. - 0.05 to 1,999.9 m/mi, ft/min. - 0.2 to 6,560 ft/min.
RPM: 0.1 RPM (< 1,000 RPM), 1 RPM (1,000 RPM).
Resolution
m/min.: 0.01m/min. (< 100 m/min.), 0.1m/min. (100 m/min.).
ft/min.: 0.1 ft/min. (< 1,000 ft/mn.), 1 ft/min. (1,000 ft/mn.).
Display
5 digits, 10 mm (0.4") LCD.
Accuracy
± (0.05% + 1 digit).
Time base
Quartz crystal.
Circuit
Exclusive one-chip of microcomputer LSI circuit.
Operating Temp.
0 to 50°C (32 to 122°F).
Operating Humidity
Less than 80 % R.H.
Memory
Last/Max./Min. value.
Battery
4 x 1.5V AA (UM-3) batteries.
Power Consumption
440
Photo type: Approx. DC 153 mA.
Contact type: Approx. DC 10 mA.
Size
195 x 61 x 38.5 mm. (7.6 x 2.4 x 1.5 inch).
Weight
280g (0.61 LB) * including batteries.
Standard Accessories
* Carrying case: 1 PC. * Reflecting tape marks (600mm): 1 PC.
* RPM adapter (CONE): 1 PC * RPM adapter (FUNEL): 1 PC
* Surface speed test wheel: 1 PC * Operation manual: 1 PC
Temperature
39240
M
METERS
39240, Waterproof Thermometer, -40°C to +200°C
Pocket-size with MAX/MIN recording.
2.75" (70mm) Stainless steel stem.
°C/°F switchable ranges of -40 to 392°F (-40 to 200°C).
MAX/MIN recall of high and low temperatures.
Data Hold and Auto power Off features.
Range: -40 to 392°F (-40 to 200°C).
Basic accuracy: ±2°F/1°C.
Resolution: 0.1°/1° resolution.
Digital display with 0.1° resolution.
Dimensions: 5.9 x 0.8 x 0.7" (150 x 20 x 18mm).
Weight: 0.7oz (20g).
Complete with one LR44 button battery and protective cover.
39272
39272, Pocket Fold-up Thermometer, -50°C to +300°C
4.5" stainless steel probe adjusts from 0 to 180° with detents at 45°, 90°, 135°
and 180°.
Wide °C/°F switchable temperature range -58 to 572°F (-50 to 300°C).
Fold up probe 4.5" (114mm) adjusts from 0° to 180° for best measurement
and viewing angle.
Large LCD display with 0.1 degree resolution.
Auto power off after 1 hour or when probe is placed in stored position.
Data Hold and Min/Max recordings.
Fast response time — one second under normal conditions.
Complete with wrist strap and one AAA battery.
Model
39272
Range
-58 to 572°F (-50 to 300°C)
Accuracy
±1.8°F (-22 to 482°F); ±1°C (-30 to 250°C)
Resolution
0.1°/1° resolution
Dimensions
6.1 x 2.0 x 0.8" (154 x 50 x 20mm)
Weight
2.5oz (71g)
392050, Dual Stem Thermometer
392050
Choice of Flat Surface or Penetration Stem Thermometer, For use in liquids,
semi-solids and solids.
Temperature range: -58 to 302°F (-50 to 150°C).
Basic Accuracy of 2°F or 1°C.
0.1° resolution to 199.9; 1° over 200°.
ON/OFF switch saves battery life.
Auto power off after 1hr of non use.
Dimensions: 5" (130mm) stainless steel probe with 2" (54mm) dial.
Weight: 1oz (29g); 1.3oz (30g) with protective sheath.
Includes 1.5V button battery, and plastic protective sheath with pocket
clip.
441
M
METERS
Temperature
401014, Indoor/Outdoor Thermometer, -50°C to +70°C
Built-in memory stores Minimum and Maximum Temperature readings
Large LCD displays 1" (25mm) digits for indoor/outdoor temp.
Indoor Range: 14 to 140°F (-10 to 60°C).
Outdoor Range: -58 to 158°F (-50 to 70°C).
Basic accuracy: ±1.8°F /1°C.
Resolution: 0.1°F/°C.
Dimensions: 4.4x4x0.9" (112x102x22mm); Weight: 6.5oz (186g).
Complete with weatherproof temperature sensor with 9.6ft (3m) thin cable,
stand, AAA battery, and wall mounting bracket.
°F/°C Switchable.
401014
8891, Waterproof Thermometer w/probe, -10°C to +110°C
Probe:
500mm
Length
8891
Optional: External Probe
P/N: VZ889PNL
Diameter: 5mm Length: 500mm
Handle length: 65mm
Cable length: 1500mm.
Safe, Quick
and Easy to
read the boiler
temperature in
faraway place!
442
Stainless probe
holder included
in standard
package to
offer you
steady probe
support!
The most cost effective waterproof temperature monitor with super large
lcd and long probe.
0.1 degree resolution and high accuracy.
Ip67 waterproof meter and external probe.
Wall mounted design for long time using.
Temp. unit °c/of switchable.
Powered by 4 alkaline AAA batteries with long battery life time.
Easy to replace battery.
Stainless long & durable external probe
-length: 0.5m
-diameter: 5mm
-handle length(nylon+glass fiber): 65mm
-cable length(sillcon): 1.5m
Low battery indicator.
Model
8891
Temp. Range (thermistor)
-10~110°C( -50~230°F)
Temp. Resolution
0.1°C(0.1°F)
Temp. Accuracy
+/-1°C(+/-1.6°F)
Temp. Response time
2 minutes typical
LCD update time
10 seconds
LCD size (mm, HxW)
45x96
Operating temp.
0~50°C
Operating RH%
Humidity <80%
Storage temp.
-20~50°C
Storage RH%
Humidity <90%
Meter Dimension(mm,LxWxT)
122x85x30
Meter Weight
~200g
Probe size(mm)
Length
Diameter
Handle length(mm)
Cable length(mm)
500
5
65
1500
Probe Weight
~80g
Battery
AAA ALKALlNEx 4pcs
Standard Package
Meter, probe, probe holder, battery, manual, plain box
Optional Accessory
External probe
Temperature
M
METERS
TM-5005/5007, Heavy Duty Thermometer, -50°C to +1300°C
Type K Thermometers with single or dual input direct or differential
measurements to 0.1°.
Rugged design for field use - includes rubber holster.
Dual input model provides differential readings.
Accurate to 0.3%, °C/°F switchable.
Front panel offset adjustment to optimize accuracy.
Displays Maximum reading plus Data Hold on large LCD display.
Includes 9V battery, holster with stand, wrist strap and temperature probe.
Accessories: Temperature probes: TP-01, TP-02, TP-03, TP-04.
Model
TM-5005
TM-5005
TM-5007
Temperature Range
-58 to 2000°F (-50 to 1300°C)
Temperature Accuracy
(0.3% rdg + 1°C/2°F) >1000°C (0.5%)
Max resolution
0.1° or 1°
Dimensions
6.5x3.0x1.7" (165x76x43mm including holster)
Weight
14.2oz (403g)
Input
Single Input
Dual Input
TP-01/02A/03/04, Temperature Probes, Type K
Model
TP-01
Range
* Max. short-tern operating
Temperature: 300°C (572°F).
* It is an ultra fast response
naked-bead thermocouple
suitable for many general purpose
application.
* Measure Range: -50°C to 900°C,
TP-02A
-50°F to 1650°F.
Thermocouple * Dimension: 10cm tube, 3.2mm Dia.
* Measure Range: -50°C to 1200°C,
TP-03
-50°F to 2200°F.
Thermocouple * Dimension: 10cm tube, 8mm Dia.
TP-01
TP-02A
TP-03
TP-04
TP-04
Surface
* Measure Range: -50°C to 400°C,
-50°F to 752°F.
* Size: Temp. sensing head - 15 mm Dia.
Probe length - 120 mm.
Accuracy
± 0.4 %
± 0.75 %
± 0.4 %
± (0.75 % + 0.5°C)
TP-05, Clamp Temperature Probe, -50°C to +350°C
Clamp Type K Temp. probe, allows for hands-free super-heat
(super-cooling) temperature measurement. The useful Temp. probe, ideal
for pipe surface temperature, heating, ventilating, air conditioning, engine
or cylinder circular tube.
Measurement range: -50 to 350°C, -58°F to 662°F.
Accuracy: 2.5°C, 4.5°F.
Spring-loaded jaw for secure grip for pipe size from 3 mm to 48 mm
diameter.
Cooperate for any Thermometer with a Type K thermocouple input.
Cable length: 2 meters coiled cable.
TP-05
443
M
Temperature 4,8 Channels Dataloggers
METERS
TM-747D, Datalogger Thermometer 4 Channels Include Software/
Cable
TM-747D
Sensor
Type
°C
Thermocouple Range
K
J
E
T
R/S
N
The TM-747D is a rugged, easy-to-use thermometer with 4 mini, flat-pin,
thermocouple sockets for inputs. It accepts 7 different thermocouple types
and displays all 4 inputs at the same time. It also provides differential
temperature measurement readings of T3-T4, as well as individual readings
of the 4 inputs. Other features are a low battery indicator, perpetual
calendar, and auto power-off.
Multi function for K/J/E/T/R/S/N types.
4 Backlit Displays.
Resolution 0.1°C/0.1°F, 1°C/1°F.
Auto Power-Off, Low Battery Indication.
USB Interface with Windows Software (Optional RS232 Cable Available).
10,000 Record Datalogger.
CALL-Fit to Quick- Read Memory Data (50 Pages/Second).
Perpetual Calendar Function.
Input protection at thermocouple input: 24V AC/DC Maximum.
Dimension (Includes housing) (mm): L184 x W82 x H44.
Weight (Includes housing, batteries): Approx. 450g.
Battery Life: 4 "AAA"" batteries (included), 550 hr.
Accuracy
(18 to 28°C Ambient)
°F
Thermocouple Range
Accuracy
(18 to 28°C Ambient)
-100 ~ 1300
±0.1% rdg + 0.7°C
-148 ~ -2372
-100 ~ 1000
±0.1% rdg + 0.7°C
-148 ~ 1832
-50 ~ 800
±0.1% rdg + 0.7°C
-58 ~ 1472
-100 ~ 400
±0.1% rdg + 0.7°C
-148 ~ 752
0 ~ 1700
± 0.1% rdg + 2°C
32 ~ 3092
-100 ~ 1300
± 0.1% rdg + 1.5°C
-148 ~ 2372
Operating Temperature and Humidity: 0 to 50°C (32 to 122°F) 0 to 80% RH
Storage Temperature and Humidity: -20 to 60°C (-4 to 140°F) 0 to 80% RH
±0.1% rdg + 1.4°F
±0.1% rdg + 1.4°F
±0.1% rdg + 1.4°F
±0.1% rdg + 1.4°F
±0.1% rdg + 4°F
± 0.1% rdg + 3°F
PROVA 800, 8 Input Thermometer / Datalogger
8 input temperature measurement/logging °C/°F) Graphic display of
each input 11 types of thermocouple (K, J, E, T, R, S, N, L, U, B, C) Easy
thermocouple mini connector Basic accuracy 0.05% ±1°C (Ktype)
Sampling Rate: 1 sec./8 input Programmable Hi-La alarm for 8 inputs
Display of max and min values of 8 inputs Standard 2G SD memory card
(stores 3.8-year data) Optional 8G SDHC memory card SD card directly
read by PC Easy data file management (Read and Delete functions)
Built-in calendar clock Independent Input Setup (type of thermocouple,
Hi-Lo alarm values, name of Engineering Unit) Isolated Input Protection of
350Vp-p between any two inputs Programmable Engineering Unit (E.U.) to
integrate Analog Output (-50 to 50mV) from instruments Screen hardcopy
into files Paperless Recorder.
PROVA 800
Sensor
Type
K
J
E
T
R/S
N
L
U
B
C
mV
444
Range
-200 ~ -100
-100 ~ -1370
-200 ~ -100
-100 ~ 100
100 ~ 1000
-150 ~ -100
-100 ~ 760
-200 ~ -100
-100 ~ 400
0 ~ 100
100 ~ 300
300 ~ 1600
0 ~ 1300
-200 ~ 900
0 ~ 600
600 ~ 1820
0 ~ 2310
-50 ~ 50
°C
Accuracy
±2.0°C
±0.05% ±1.0°C
±2.5°C
±1.5°C
±0.05% ±1.0°C
±2.0°C
±0.05% ±1.0°C
±1.5°C
±0.1% ±0.5°C
±5.0°C
±3.0°C
±0.05% ±2.0°C
±0.1% ±1.0°C
±0.1% ±1.0°C
±0.1% ±1.0°C
±0.05% ±2.0°C
±0.1% ±1.5°C
±0.05% ±20µV
Range
-328 ~ -148
-148 ~ -2498
-328 ~ -148
-148 ~ 212
212 ~ 1832
-238 ~ -148
-148 ~ 1400
-328 ~ -148
-148 ~ 752
32 ~ 212
212 ~ 572
572 ~ 2912
32 ~ 2372
-328 ~ 1652
32 ~ 1112
1112 ~ 3308
32 ~ 4190
-50 ~ 50
°F
Accuracy
±3.6°F
±0.05% ±1.8°F
±4.5°F
±2.7°F
±0.05% ±1.8°F
±3.6°F
±0.05% ±1.8°F
±2.7°F
±0.1% ±0.9°F
±9.0°F
±5.4°F
±0.05% ±3.6°F
±0.1% ±1.8°F
±0.1% ±1.8°F
±0.1% ±1.8°F
±0.05% ±3.6°F
±0.1% ±2.7°F
±0.05% ±20µV
Temperature 12 Channels Datalogger
M
METERS
BTM-4208SD, 12 Channels Temp. Recorder, SD Card, Real Time
Datalogger, Patent
BTM-4208SD
12 channels Temperature recorder, use SD card to save the data along
with time information, paperless. Real time datalogger, save the 12
channels Temp. measuring data along the time information (year, month,
date, minute, second) into the SD memory card and can be down load
to the Excel, extra software is no need. User can make the further data or
graphic analysis by themselves. Channels no.: 12 channels (CH1 to CH12)
temperature measurement. Sensor type: Type J/K/T/E/R/S thermocouple.
Auto datalogger or manual datalogger. Datalogger sampling time range: 1
to 3600 seconds Type K thermometer: -100 to 1300°C. Type J
thermometer: -100 to 1200°C. Page select, show CH1 to CH8 or CH9 to
CH12 in the same LCD. Display resolution: 1 degree/0.1 degree. Offset
adjustment. SD card capacity: 1 GB to 16 GB. RS232/USB computer
interface. Microcomputer circuit provides intelligent function and high
accuracy. Jumbo LCD with green light backlight, easy reading. Can
default auto power off or manual power off Data hold to freeze the
measurement value. Record function to present the max. and min.
reading. Power by UM3/AA (1.5V) x 8 batteries or DC 9V adapter. RS232/
USB PC COMPUTER interface Heavy duty & compact housing case.
Model
BTM-4208SD
Circuit
Custom one-chip of microprocessor LSI circuit.
Display
LCD size : 82 mm x 61 mm. * with green color backlight.
Channels
12 channels : T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T11 and T12.
Sensor type
Type K thermocouple probe. Type J/T/E/R/S thermocouple probe.
Resolution
0.1°C/1°C, 0.1°F/1 °F.
Datalogger
Sampling Time
Auto
Manual
1 second to 3600 seconds
@ Sampling time can set to 1 second, but memory data may loss.
Push the datalogger button once will save data one time.
@ Set the sampling time to 0 second.
Memory Card
SD memory card. 1 GB to 16 GB.
Advanced setting
* Set clock time (Year/Month/Date, Hour/Minute/Second) * Decimal point of SD
card setting * Auto power OFF management * Set beep Sound ON/OFF * Set
temperature unit to °C or °F * Set sampling time * SD memory card Format
Temp. Compensation
Automatic temp. compensation for the type K/J/T/E/R/S thermometer.
Linear Compensation
Linear Compensation for the full range.
Offset Adjustment
To adjust the zero temperature deviation value.
Probe Input Socket
2 pin thermocouple socket.
Over Indication
Show “ - - - - “.
Data Hold
Freeze the display reading.
Memory Recall
Maximum & Minimum value.
Data Output
RS 232/USB PC computer interface. * Connect the optional RS232 cable UPCB-02 will
get the RS232 plug * Connect the optional USB cable USB-01 will get the USB plug.
Sampling Time of Display
Approx. 1 second.
Power off
Auto shut off saves battery life or Auto shut off saves battery life or manual off by
push button.
Operating Temperature
0 to 50°C
Operating Humidity
Less than 85% R.H.
Power Supply
* Alkaline or heavy duty DC 1.5 V battery (UM3, AA) x 6 PCs, or equivalent
* DC 9V adapter input. (AC/DC power adapter is optional)
Normal operation ( w/o SD card save data and LCD Backlight is OFF) :
Approx. DC 7.5 mA
Power Current
When SD card save the data and LCD Backlight is OFF) : Approx. DC 25 mA.
* AIf LCD backlight on, the power consumption will increase approx. 11 mA.
Weight
Meter : 948g (includes batteries)
Dimension
225 X 125 X 64 mm (8.86 X 4.92 X 2.52 inch)
Accessories Included
* Instruction manual: 1PC * Type K Temp. probe, TP-01: 2 PC
* SD Card (2GB): 1 PC * Hard carrying case, CA-08: 1PC
* Type K thermocouple probe. TP-01, TP-02A. TP-03, TP-04 * USB cable, USB-01. * RS232
cable, UPCB-02. * Data Acquisition software, SW-U811-WIN. * AC to DC 9V adapter.
Optional Accessories
445
M
Tempature 12 Channels, IR Thermometer
METERS
Electrical Specifications (23±5°C):
Sensor Type
Resolution
Range
Accuracy
0.1°C
-50.0 to 100.0°C / -50.1 to -999.9°C
± (0.4 % + 1°C) / ± (0.4 % + 0.5°C)
1°C
1000 to 1300°C
± (0.4 % + 1°C)
0.1°F
-58.0 to 148.0°F / -58.0 to -999.9°F
± (0.4 % + 1.8°F) / ± (0.4 % + 1°F)
1°F
-1000 to 2372°F
± (0.4 % + 2°C)
0.1°C
-50.0 to 100.0°C / -50.1 to -999.9°C
± (0.4 % + 1°C) / ± (0.4 % + 0.5°C)
Type K
Type J
Type T
Type E
1°C
1000 to 1150°C
± (0.4 % + 1°C)
0.1°F
-58.0 to 148.0°F / -58.0 to -999.9°F
± (0.4 % + 1.8°F) / ± (0.4 % + 1°F)
1°F
1000 to 2102°F
± (0.4 % + 2°C)
0.1°C
-50.1 to 100.0°C / -50.0 to -400.0°C
± (0.4 % + 1°C) / ± (0.4 % + 0.5°C)
0.1°F
-58.1 to 148.0°F / -58.0 to -752.0°F
± (0.4 % + 1.8°F) / ± (0.4 % + 1°F)
0.1°C
-50.1 to 100.0°C / -50.0 to -900.0°C
± (0.4 % + 1°C) / ± (0.4 % + 0.5°C)
0.1°F
-58.1 to 148.0°F / -58.0 to -999.9°F
± (0.4 % + 1.8°F) / ± (0.4 % + 1°F)
1°F
1000 to 1652°F
± (0.4 % + 2°F)
1°C
0 to 600.0°C / 601 to 1700.0°C
± (0.4 % + 0.5°C) / ± (0.4 % + 1°C)
1°F
32 to 1112°F / 1113 to 3092°F
± (0.4 % + 1°F) / ± (0.4 % + 2°F)
1°C
0 to 600.0°C / 601 to 1500.0°C
± (0.4 % + 0.5°C) / ± (0.4 % + 1°C)
1°F
32 to 1112°F / 1113 to 2732°F
± (0.4 % + 1°F) / ± (0.4 % + 2°F)
Type R
Type S
Remark:
a. Accuracy value is specified for the meter only.
b. Accuracy is tested under the meter’s environment temperature within 23 ± 5°C.
c. Linearity Correction: Memorize the thermocouple’s curve into the intelligent CPU circuit.
VIR50, Digital Laser Video IR Thermometer, -50°C to +2200°C
2.2" Color TFT LCD and Built-in Camera with a microSD card for capturing
images (JPEG) and video for viewing on your PC.
VIR50
Dual laser indicates ideal measuring distance where the two laser points
converge to a 1" target spot Fast 150 millisecond response time Color
LED bargraph for viewing trends Body Temperature Function for quickly
detecting elevated body (forehead) temperature Type K Thermocouple
input Air Temperature and Relative Humidity measurement Adjustable
emissivity increases measurement accuracy for different surfaces
Adjustable High/Low set points with audible alarm alerts user when
temperature exceeds the programmed set points MAX/MIN/AVG/DIF
functions Trigger lock function for continuous readings USB interface
Auto power off Double molded housing Complete with microSD card,
general purpose Type K bead wire probe, USB cable, rechargeable 3.7V
battery, and carrying case.
Model
VIR50
Laser Convergence Distance
50" (127cm)
IR Temperature Range
-58 to 3992°F (-50 to 2200°C)
Repeatability
±0.5% or 1.8°F/1°C
Basic Accuracy
±(1% of rdg + 2°F/1°C)
Max resolution
0.1°F/°C
Emissivity
0.10 to 1.00 Adjustable
Field of View (Distance to Target)
50:1
Type K Temperature Range
-58 to 2498°F (-50 to 1370°C)
Air Temperature Range
32 to 122°F (0 to 50°C)
Relative Humidity
0 to 100%RH
Dimensions
7.4x6.0x2.2" (189x152x57mm)
Weight
17.4oz (494g)
Ordering
* VIR50 Dual Laser Video IR Thermometer * BATT-37V - Rechargeable 3.7V battery
446
Temperature, IR Thermometers
M
METERS
42510A, -50°C to 650°C, 12:1, Compact Laser IR, Thermometer
Compact thermometer measures up to 650°C (1200°F) with high accuracy
42510A
Adjustable high/low visual and audible alarm
Adjustable emissivity for better accuracy on different surfaces
MAX/MIN features display highest and lowest values
Built-in laser pointer identifies target area
Backlighting
Over-range indicator
Automatic Data Hold when trigger released
Auto power off
Complete with 9V battery and pouch case
Model
42510A
IR Temperature (Non-contact)
-25 to 1200°F (-50 to 650°C)
Basic Accuracy
±(1% of reading + 2°F/1°C)
Max. Resolution
0.1°F/°C; 1°F/°C
Emissivity
0.1 to 1.00 Adjustable
Repeatability
Repeatability ±0.5% or ±1.8°F/°C
Field of view (Distance to Target)
12:1
CE approved
Yes
Dimensions
3.2x1.6x6.3" (82x42x160mm)
Weight
6.4oz (180g)
42512, Dual Laser, -50°C to 1000°C, 30:1, IR Thermometer
Fast response and accurate measurements
42512
Dual laser simplifies distance-to-target ratio—no more calculations!
Accurate measurements at 30" distance
Fast 150 millisecond instantaneous response for capturing spikes in temp.
Max mode captures and holds rapidly changing temperatures
Lock function for continuous readings
White backlit dual LCD display
Adjustable emissivity increases measurement accuracy for different
surfaces
Double molded housing
Adjustable High/Low set points with audible alarm alerts user when
temperature exceeds the programmed set points
Complete with carrying case and 9V battery
Model
42512
Laser Convergence Distance
30” (76.2cm)
Range
-58 to 1832°F (-50 to 1000°C)
Basic Accuracy
±(1% of rdg + 2°F/1°C)
Max. Resolution
0.1°F/°C
Repeatability
±0.5% or 1.8°F/1°C
Emissivity
0.10 to 1.00 Adjustable
Field of view (Distance to Target)
30:1
CE approved
Yes
Dimensions
5.7x4x1.6" (146x104x43mm)
Weight
5.7oz (163g)
447
M
Temperature, IR Thermometers
METERS
42540, High Temperature IR Thermometer, -50°C to 760°C
Measures surface temperature up to 1400°F (760°C), With built-in Laser
Pointer that identifies target area and improves aim.
42540
High temperature range from -58° to 1400°F (-50 to 760°C) 16 to 1
distance to target ratio measures smaller surface areas at greater distances
Adjustable high/low alarm alerts user visually and audibly when
temperature exceeds programmed limits Adjustable emissivity for better
accuracy on different surfaces MAX/MIN/AVG/DIF features display highest,
lowest, average, and MAX minus MIN values Large backlit display Laser
pointer identifies target area Automatic Data Hold
Automatic Power Off High Resolution of 0.1º up to 199.9º Complete
with 9V battery and hard carrying case.
Model
42540
IR Temperature Range
-58 to 1400°F (-50 to 760°C)
Basic Accuracy
±2%rdgor4ºF(2°C)<932°F(500°C);±(2.5%rdg+5°)>932°F(500°C)
Max resolution
0.1°F/°C
Emissivity
0.10 to 1.00 Adjustable
Field of View (Distance to Target)
16:1
Dimensions
3.9x2.2x9" (100x56x230mm)
Weight
10.2oz (290g)
42570, High Temperature IR Thermometer, -50°C to 2200°C
Fast response (100mS) with highest accuracy at point where dual lasers
converge plus Type K input and USB interface
42570
High 50:1 distance to target ratio measures smaller surface areas
at greater distances Dual Laser Targeting indicates ideal measuring
distance when two laser points converge to 1" target spot Fast 0.10
second response time Tripod mounting feature and Lock function for
continuous measurements Stores up to 100 readings White backlit LCD
with bargraph MAX/MIN/AVG/DIF functions Adjustable emissivity
Adjustable High/Low set points with audible alarm Complete with
general purpose Type K bead wire probe, USB cable and PC software,
tripod, 9V battery and case.
Model
42570
Laser Convergence Distance
50" (127cm)
IR Temperature Range
-58 to 3992°F (-50 to 2200°C)
Repeatability
±0.5% or 1.8°F/1°C
Basic Accuracy
±(1% of rdg + 2°F/1°C)
Max resolution
0.1°F/°C
Emissivity
0.10 to 1.00 Adjustable
Field of View (Distance to Target)
50:1
Type K Range
-58 to 2498°F (-50 to 1370°C)
Memory
Manually Store/Recall 100 readings
Dimensions
8x6.1x2" (204x155x52mm)
Weight
11.3oz (320g)
Ordering
42570 50" Distance Dual Laser InfraRed Thermometer
448
Thickness
CG204, Coating Thickness Tester
Automatic recognition for ferrous and
non-ferrous substrates
CG204
DC-515, Digital Caliber, 0 to 150mm
Conforms to GB/T 4956-1985, GB/T 4957-1985, JB/T 8393-1996, JJG-889-95,
and JJG 818-93.
Magnetic induction for ferrous substrates.
Eddy current measurement for non-ferrous substrates.
Two measuring modes (Single and Continuous) and Working modes
(Direct and Group).
Memory stores 400 readings: 80 Direct and 320 Group.
User adjustable high/low alarms, Min/Max/Average, One or two point
calibration.
USB interface includes software.
Complete with two AAA batteries, USB cable, software, Calibration
Iron, Calibration Aluminum, Reference Films, and carrying case.
Specification
Working Principle
Measuring Range
Basic Accuracy
Resolution
Min. Curvature Radius
Minimum Diameter
Minimum Thickness
Dimensions
Weight
Ordering
Model
Display
Measurement range
Resolution/Accuracy
Max. measuring speed
Measuring unit
Zero setting
Polarity
Operating/Storage Temp.
Operating Humidity
Power Supply
Power Consumption
DC-515
DC-516, Digital Micrometer, 0 to 25mm
Data output
Weight/Dimension
Data output
Standard Accessories
Model
Display
Measurement range
Resolution/Accuracy
Buttons
Measuring unit
Zero setting
Power ON/OFF
Operating/Storage Temp.
Operating Humidity
Power Supply
Data output
Weight / Dimension
Size of square drive
Data output
Standard Accessories
DC-516
M
METERS
Operating Procedures
Ferrous Probe
Non-Ferrous Probe
0 to 1250µm; 0 to 49mils
0 to 1250µm; 0 to 49mils
Magnetic Induction
Eddy Current
±3%
±3%
0.1µm (0.004mils)
0.1µm (0.004mils)
1.5mm (59.06mils)
7mm (275.6mils)
3mm (118.1mils)
5mm (196.9mils)
0.5mm (19.69mils)
0.3mm (11.81mils)
4.7 x 2.4 x 1.25" (120 x 62 x 32mm)
6.17oz (175g)
* CG204 - Coating Thickness Tester * CG204-REF Replacement Reference Films for CG204 (10 sets)
DC-515
* 4.7 mm (0.19") LCD, 6 digits. * "-" for minus sign.
* "mm" for mm measuring unit. * "IN" for inch measuring unit.
0 to 150 mm (0 to 6 inch).
0.01 mm/0.0005 inch. / ± 0.03 mm/0.0015 inch.
1.5 m/sec., 60 inch/sec.
Inch & mm, changed by pushing the button, true conversion.
Zero setting at any position within the measuring range.
Automatic switching, '-' indicates negative polarity.
0°C to 40°C (32°F to 104°F)/-20°C to 70°C (-4°F to 194°F)
Less than 80% R.H.
One battery, 1.5V, silver oxide.
Approx. DC 18 uA. Battery approx.
Approx. 5000 hours for continuous use.
Serial output for computer interface & printer.
Approx. 145 g/0.32 lb. / Length 237 mm(9.4 inch).
Serial output for computer interface & printer.
* Instruction manual: 1PC * Carrying case: 1 PC
* Battery (1.5 V, silver-oxide): 1 PC
DC-516
* LCD size: 32mm x 11mm, 6 digits. * "mm" for mm
measuring unit. * "in" for inch measuring unit.
0 to 25 mm (0 to 1 inch).
0.001 mm/0.00005 inch. / 0.002 mm.
3 buttons, ON/OFF, ZERO, inch/mm.
Inch & mm, changed by pushing the button, true conversion.
Zero setting at any position within the measuring range.
Automatic power off or manual power off by pushing
the " ON/OFF " button.
0°C to 40°C (32°F to 104°F)/-20°C to 70°C (-4°F to 194°F)
Less than 80% R.H.
One silver-oxide button battery SR44 ( 1.5 V ).
Serial output for computer interface & printer.
Approx. 274 g/0.60 LB. / 157 mm x 56 mm x 22 mm.
1/4 inch square (6.35 mm square).
Optional, RS-232 serial computer interface
* Instruction manual: 1PC * Carrying case: 1 PC
* Battery (1.5 V, silver-oxide SR-44): 1 PC
1. Press "ON/OFF" button to power on the micrometer.
2. Press "inch/mm" button to be in Metric or Inch
system condition. 3. First keep measuring face contact
to reset, then press "ZERO" key to display zero
449
M
Vacuum
METERS
VC-9200, Vacuum Meter, 1 to 1500mbar
VC-9200
Absolute vacuum & absolute pressure measurement.
Wide measure range from 1 to 1500 mbar.
Overload protection up to 2000 mbar max.
Separate probe, easy operation.
Application : Automobile, Industrial, laboratory, heating, ventilation,
medical hospital.
Heavy duty sensor used for air, oil gas, liquid.
8 kind display units (torr, mm Hg, micron, mbar, KPa, Pa, inch Hg, psi) select
by push button on the front panel.
Auto shut off saves battery life.
Microprocessor circuit assures maximum possible accuracy, provides
special functions and features.
Records maximum & minimum readings with recall.
Data Hold function for stored the desired value on display.
Built-in low battery indicator.
RS232 PC serial interface, can match the personal computer used as the
Datalogger, Recorder.
Model
VC-9200
Display
61 mm x 34 mm supper large LCD display. 15 mm (0.6") digit size.
Display units
8 kind display units : torr, mm Hg, micron, mbar, KPa, Pa, inch Hg, psi.
Circuit
Microprocessor LSI circuit.
Function
Data hold
Data hold, memory (max., min.)
* Separate probe, easy operation. * Heavy duty sensor used for vacuum
measurement of air, oil gas liquid.
By push button.
Data record
Records Maximum & Minimum readings.
Power Off
Auto shut off saves battery life, or manual off by push button.
Sensor probe
Data Output
RS 232 PC serial interface.
Sampling Time
Approx. 0.8 second.
Data Output
RS 232 PC serial interface.
Operating Humidity
Less than 80% R.H.
Operating Temp.
0°C to 50°C (32°F to 122°F)
Power Supply
006P DC 9V battery (heavy duty).
Power Current
Approx. DC 6.0 mA.
Pressure Port Connector
1/4" PS
Instrument: 220 g/0.48 LB.
Weight
Sensor probe: 175 g/0.39 LB.
Meter: 180 x 72 x 32 mm (7.1 x 2.8 x 1.3 inch)
Dimension
Accessories Included
Optional Accessories
Sensor probe: 90 mm x 30 mm Dia.
* Instruction manual: 1PC * Hard Carrying case: 1PC * Sensor probe: 1 PC
* Data acquisition software (Windows version), SW-U801-WIN
* RS232 cable, UPCB-01 * USB cable, USB-01
Electrical Specifications (23±5°C):
450
unit
Max. range
Resolution
mbar
1500 mbar
1 mbar
KPa
150.0 KPa
0.1 KPa
Pa
150,000 Pa
100 Pa
torr
1125 torr
1 torr
mm Hg
1125 mm Hg
1 mm Hg
micron
1125,000 micron
1000 micron
inch Hg
44.30 inch Hg
0.02 inch Hg
psi
21.75 psi
0.01 psi
Accuracy
± 1% F.S. (F.S.: full scale)
Note: Included linearity,
hysteresis and repeatability
Vibration
M
METERS
PVB-820, Vibration Meter, Pen Type, Acceleration, Velocity, IP-65
Metric & Imperial Unit
Applications for industrial vibration monitoring: All industrial machinery
vibrates. The level of vibration is a useful guide to machine condition. Poor
balance, misalignment & looseness of the structure will cause the vibration
level increase, it is a sure sign that the maintenance is needed.
Pen type digital vibration meter, vibration sensor is built in, all in one.
Acceleration, Velocity measurement, RMS measurement value.
Metric & Imperial display unit.
Frequency range 10 Hz - 1 kHz, sensitivity relative meet ISO 2954.
Microcomputer circuit, intelligent function, high accuracy.
LCD display, easy read out.
Complete set with the Test pin and the Magnetic base are the
standard accessories.
Built-in low battery indicator.
Heavy duty & compact housing case.
IP65 protection.
Compact size, light weight.
Soft carrying case is the optional accessory
PVB-820
Model
PVB-820
Display
LCD, size : 20 mm x 28 mm.
Measurement
Velocity, Acceleration. * RMS value.
Function
Acceleration
m/s2, g, ft/s2
Velocity
mm/s, cm/s, inch/s
Frequency range
10 Hz to 1 KHz * Sensitivity relative during the frequency range meet ISO 2954
Circuit
Exclusive microcomputer circuit.
Zero adjust
Build in the Zero adjustment VR, easy to make adjustment.
Data Hold
Freeze the display reading.
Sampling Time
Approx. 1 second.
Operating Humidity
Less than 80% R.H.
Operating Temp.
0°C to 50°C (32°F to 122°F)
Power Supply
DC 1.5V battery ( UM-4/AAA ) x 4 PCs.
Power Consumption
Approx. DC 12 mA.
Weight
489 g/1.08 LB.
Dimension
Accessories Included
Meter: 175 x 40 x 32 mm (6.9 x 1.6 x 1.3 inch). * Meter without sensing head,
Sensing head : Round 9 mm Dia. x 30 mm.
* Instruction manual: 1PC * Meter with sensing head: 1 Set
* Magnetic base: 1 PC * Soft carrying case, CA-52A: 1 PC
Electrical Specifications
Acceleration (RMS)
Unit
m/s2
g @ 1g=9.8 m/s2
ft/s2
Range
0.5 to 199.9 m/s2
0.05 to 20.39 g
2 to 656 ft/s2
Resolution
0.1m/s
0.01 g
1 ft/s2
Accuracy
± (5% + 2d) reading
@ 160 Hz, 80 Hz, 23 ± 5°
± (5% + 2d) reading
@ 160 Hz, 80 Hz, 23 ± 5°
± (5% + 2d) reading
@ 160 Hz, 80 Hz, 23 ± 5°
Calibration Point
50 m/s2 (160Hz)
50 m/s2 (160Hz)
50 m/s2 (160Hz)
Unit
mm/s
cm/s
inch/s
2
Velocity (RMS)
Range
0.5 to 199.9 mm/s
0.05 to 19.99 cm/s
0.02 to 7.87 inch/s
Resolution
0.1 mm/s
0.01 cm/s
0.01 inch/s
Accuracy
± (5% + 2d) reading
@ 160 Hz, 80 Hz, 23 ± 5°
± (5% + 2d) reading
@ 160 Hz, 80 Hz, 23 ± 5°
± (5% + 2d) reading
@ 160 Hz, 80 Hz, 23 ± 5°
Calibration Point
50 mm/s (160Hz)
50 mm/s (160Hz)
50 mm/s (160Hz)
451
M
Water Potential Measurement for Agriculture
METERS
Hold
Digital Display
ARIMAD-3000S, Plant Water Potential Measurement
Device for Agricultural use
Sealing Knob
Pressure chamber method demonstrating the plant’s
reaction to moisture excess or defficiency.
Enables adjustments of irrigation schedule.
On/Off
Communication
ARIMAD keeps you in touch with your crop’s water status!
Chamber
Lid
External
Gas
Inlet
Flow
Regulator
Zero Switch
Simple & Short Procedure of 4 Steps:
1. Selecting a representative leaf.
2. Preparing the instrument.
3. Inserting pressured gas in the chamber.
4. Reading the plant’s water potential.
3 Way
Valve
Battery
Provides Indication of:
Prevailing soil moisture stress.
Influence of environmental changes-heat load, humidity,
wind, salinity etc.
Plant moisture stress.
Changes in growth, proteins & photosynthesis.
ARIMAD-3000S
Standard gasket fits all crops with up to 6mm
(0.25”) petiole like cotton.
Optional supply of gasket for citrus leaves, corn,
sorghum etc. upon request.
Rubber Gasket
Lid
Specifications:
Accuracy: ±1% full scale.
Size: W355 x D280 x H175mm.
Weight: 7kg.
Battery: 9V.
Data hold.
Memory record-Max./Min.
RS-232 output for datalogger option.
Applicable software windows version.
Pressure
Gauge
Pressure Meter:
Certified under ISO-9001, CE, IEC-1010 regulations.
Can cooperate with various sensors for different
plant species (5,10,20,35,70bar).
Ordering Information:
Arimad-3000S 5,10,20,35,70
Compressed
Gas Cylinder
Chamber
Low Tension values (~3bar) - High water potential,
sufficient water for plant growth.
High Tension values (~20bar) - Low water potential,
adjustments of water supply needed.
Measuring Range:
Sensor type
5 bar
10 bar
20 bar
35 bar
70 bar
Max.
range
Resolution
Max.
range
Resolution
Max.
range
Resolution
Max.
range
Resolution
Max.
range
Resolution
bar
5
0.005
10
0.01
20
0.02
35
0.05
70
0.1
psi
72.5
0.1
145
0.2
290
0.2
508
1
1015
2
Kg/cm2
5.095
0.005
10.19
0.01
20.40
0.02
35.7
0.05
71.38
0.1
mm/Hg
3750
5
7500
10
15000
20
26252
50
52504.5
100
inch/Hg
147.6
0.1
295.2
0.2
590.5
0.5
1033
1
2067
2
meter/H20
50.95
0.05
101.9
0.1
204.0
0.2
356.9
0.5
713.8
1
inch/HF20
2006
2
4010
5
8020
10
14052
20
28103
50
Atmosphere
4.935
0.005
9.87
0.01
19.74
0.02
34.54
0.05
69.08
0.1
452
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement