oscilloscopes oscilloscope digital oscilloscopes digital storage scopes

oscilloscopes oscilloscope digital oscilloscopes digital storage scopes
OSCILLOSCOPES
DIGITAL STORAGE SCOPES
OSCILLOSCOPE
DIGITAL STORAGE
GDS1000-U SERIES & GDS1000A-U SERIES
50MHZ, 100MHZ
The INSTEK 1000-U and 1000A-U
series DSO's are the most economic scopes to date while
at the same time offer higher bandwidths, better sampling
rates and advanced features such as GO-NO-GO testing,
FFT and Data Logging capability. Freewave software
included (download). All models are two channel scopes.
DUAL CHANNEL WITH LOGIC ANALYZER MODULE
MODELS DS1052 / DS1102
• True mixed signal oscilloscope with 16 channels of
digital acquisition
• 5.7" 64K TFT color, vivid
display
• 1GS/s Msa/s real-time
sample
• Built-in USB host to support
USB flash memory, USB
printers and direct system upgrades
• Advanced trigger modes includes edge, video, slope, alternate, pulse width, pattern
• 1M of memory (512K points dual channels)
• Power: 100-240V / 50VA max
Part No.
Description
01DS1102E
01DS1052LCD
01DS1102LCD
100MHz Scope
50MHz Scope w/Logic Analyzer
100MHz Scope w/Logic Analyzer
Price
399.00
649.00
719.00
DIGITAL OSCILLOSCOPES
1000-U series:
• 50MHz, 70MHz and 100MHz models
• 250MSa/s real time sampling rate.
• 25GSa/s equivalent-time
• 4K record length
• USB port for PC connection
• Go-No-Go, Data Logging & FFT
• 19 automatic measurements
• 5.7" color TFT LCD display
• Peak detect as fast as lOns
• Save/Recall 15 front panel settings & waveforms
60MH / 100MHZ / 300MHZ
MODELS: DS1062CA / DS1102CA / DS1302CA
• 5.7", 64K TFT color, vivid
display
• 2 GSa/s max. real time
sample rate
• Up to 2000 wfrms/s refresh
rate
• Versatile Trigger Modes: Edge, video, pulse width,
slope and alternate
• Built-in USB host to support USB flash memory
• Built-in help system
• Vertical Sensitivity: 2mv/div to 10v/div
• Max. Input Voltage: 300V (DC and AC peak)
• Cursor Measurements: Manual, track and auto measure modes
• Math: Add, subtract, multiply, FET and invert
• Power: 100-240V / 50VA max.
• Dimensions & Weight: 303 x 154 x 133mm, 5 lbs.
Part No.
01DS1062ACH
01DS1102ACH
01DS1302ACH
Description
60MHz Oscilloscope
100MHz Oscilloscope
300MHz Oscilloscope
Price
$745.00
945.00
1,495.00
1000A-U series:
• 70MHz, 100MHz, 150MHz models
• 1GSa/s real time sampling rate.
• 25GSa/s equivalent-time record length
• 2mV- lOV vertical scale
• USB host and device interface supported
• Go-No-Go, Data Logging and ZOOM FFT
• Up to 27 automatic measurements
• 5.7" TFT LCD display
Part No.
01GDS1052U
01GDS1072U
01GDS1102U
01OSA1072AU
01OSA1102AU
01OSA1152AU
Description
Model 1052U 50MHz
Model 1072U 70MHz
Model 1102U 100MHz
Model 1072AU 70MHz
Model 1102AU 100MHz
Model 1152AU 150MHz
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
(732) 381-1006
(732) 381-1572
Each
$299.00
359.00
399.00
419.00
529.95
839.00
101
OSCILLOSCOPES
2 CHANNEL, DUAL
TRACE ANALOG OSCILLOSCOPES
Model 2120C - 30 Mhz
MODEL GOS-620
Model 2121C – 30Mhz with built-in
Frequency Counter
Model 2125C – 30Mhz with
Component Tester
Model 2160C – 60Mhz with
Component Tester
Features:
• 8 x 10 cm CRT. Models 2125C & 2160C equipped with variable
scale illumination, and built-in COMPONENT TESTER
• Model 2121C features built-in 50MHz FREQUENCY COUNTER
• Dual trace all models for displaying two waveforms simultaneously,
selectable single trace if desired. Alternate or chop sweep selectable
at all sweep rates
• 5 mV/div sensitivity full bandwidth. High sensitivity 1mV/div and 2
mV/div using PULL x5 gain control
• Sweep features: Calibrated time measurements. 23 ranges. X10
sweep magnification for close examination of waveforms
• Dual time base features Models 2125C & 2160C
Part No.
01BK2120C
01BK2121C
01BK2125C
01BK2160C
20MHZ OSCILLOSCOPE
Description
30 MHz analog scope
30 MHz analog scope with frequency counter
30 MHz analog scope with component tester
60 MHz analog scope with component tester
Price
619.00
659.00
675.00
1,119.00
Bandwidth to meet many school
lab requirements, and priced to
stretch budgets. This high quality
scope is the economy version of
the GOS-622G, offering many of
the same features. Probes and
manual are included (with all our
bench model scopes).
•
•
•
•
•
•
•
•
•
•
20MHz, dual channel
High sensitivity 1mV/DIV
Channel 1 output 20mv/DIV
TV synchronization
Z axis input
ALT triggering function
X5 magnification DC ~ 7MHz
Horizontal sweep 0.2µs ~ 0.5s/DIV
AC trigger coupling
XY bandwidth DC ~ 500KHz
Part No. 01OS620 • Price: $420.00
20MHZ
OSCILLOSCOPE
20 MHZ OSCILLOSCOPE
•
•
•
•
•
•
•
• 20 MHz dual channel
• High sensitivity,
1mV/DIV
• CH1 output
• TV synchronization
• Z axis input
• ALT triggering function
• Hold Off function
• Trigger level lock function
MODEL 622G
20MHz
Dual or single channel
High sensitivity 1Mv/Div
Z axis input
10 times sweep magnification
Reliable, light electronic encoder
ALT triggering, triggering level lock,
auto sync.
functions
• Optional Frequency Counter added
at extra cost
Part No.
Description
01OSM2620FG
20MHz with Freq. Counter
Price
$340.00
30 MHZ OSCILLOSCOPE WITH
FREQUENCY COUNTER
MODEL GOS-630FC
•
•
•
•
30 MHz analog 2 channel scope
Internal 5 digit counter for easy frequency measurements
High vertical sensitivity up to 1mV/div for capturing small signals
LCD readout display shows vertical/horizontal settings and input signal
frequency
• Auto time-base function to auto select appropriate horizontal time
base
• Buzzer alarm alerts users when vert/hor setting reaches max or min
• High performance scope with features rarely available within this
class
Part No. 01GOS630FC • Price: $445.00
102
Part No. 01OS622G • Price: $450.00
20 MHZ OSCILLOSCOPE
W/FUNCTION GENERATOR
MODEL GOS-620FG
•
•
•
•
•
•
•
•
•
Built-in 1 MHz Function Generator
20MHz, Dual Channel
High sensitivity 1mV/DIV
TV Synchronization
Z axis input
ALT Triggering Function
CH1 output
Economic Choice for High Quality
Dimensions and Weight – 12" x 6"
x 19"; 20 lbs.
Part No. 01OS620FG • Price $530.00
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
40 MHZ, 500 MSA/S
DIGITAL STORAGE OSCILLOSCOPE
MODEL 2532B
NEW!
The 2532B Digital Storage Oscilloscope delivers
essential features and
reliable performance at
a price you can afford.
Analog style knobs and controls combined with a smart Auto
set function make this oscilloscope easy to use. The instrument
comes with PC software that lets you easily capture, analyze,
and document waveforms and measurement results.
•
•
•
•
•
•
•
•
•
40 MHz bandwidth, 500MSa/s sample rate
5.7” color display
One touch automatic setup for ease of use (Auto)
Long waveform memory up to 32,000 point record length
for each channel
32 automatic measurements
FFT plus four additional math functions
Extensive trigger capabilities including pulse width and
line-selectable video trigger
Save/recall setup and waveform data
Transfer waveform data, screen shots, and measurement
results to a Windows PC via USB port. Analyze
measurement results “off-line” or in real-time.
Part No. 01BK2532B • Price: $545.00
OSCILLOSCOPES
OWON DIGITAL STORAGE
OSCILLOSCOPE
30MHZ/60MHZ/100MHZ
2 CHANNEL WITH LAN & VGA
PORTS
• 8 inch TF 65K Color LCD
with 800x600 pixel resolution
• USB, LAN & VGA interface
• Includes 2 probes, power
cable, USB cable & CD with
software
• Dimensions: 14" x 3" x 7";
wt: 5 lbs
Part No.
01SDS5032E
01SDS6026
01SDS7102
SDS5032
SDS6062/SDS7012
Description
30 MHz DSO, 250Ms/s with
10K points memory on each channel.
60 MHz DSO, 500Ms/s with
10M points memory
100 MHz DSO, 1Gs/s with
10M points memory
Price
$295
$380
$490
OSCILLOSCOPE TRAINING KIT
MODEL GDB03
The GDB-03 training kit is
designed to work with the
INSTEK GDS2xxxA series
oscilloscopes and the
INSTEK GDS3xxx series
oscilloscopes. It enables
the user to learn both the
basic and the advanced
functions of these Digital
Storage Oscilloscopes
(DSO's). Following the
training procedures of this
training kit, you will quickly understand basic operations. Many advanced operations and unique features of these scopes are also covered. (3) types
of bus signals, (9) basic and (18) advanced scope
training signals are provided
Part No.
01GDB03
Description
Oscilloscope training kit for INSTEK
for 2xxx and 3 xxx series scopes
Price
$305.00
DIGITAL SCOPES WITH
BUILT IN ARB GENERATOR OPTION
MODEL 2540B - 60MHZ DSO
MODEL 2542B - 100MHZ DSO
MODEL 2540B-GEN - 60MHZ
WITH 20MHZ BUILT-IN ARB GENERATOR
MODEL 2542B-GEN - 100MHZ
WITH 40MHZ BUILT-IN ARB GENERATOR
Features:
• Dual Channel, PC Software, front panel USB port
• Educators: Ability to disable, auto-set button
• FFT + (3) additional math functions
• 28 automatic measurements
• Digital filtering, waveform recorder, pass/fail limit testing
• Arb models feature AM/FM, FSK, PSK, PWM, save up to 10
user-defined waveforms. Sweep and Burst mode.
Part No.
01BK2540B
01BK2542B
01BK2540B-GEN
01BK2542B-GEN
Price
Description
$779.00
5 1/2 Digit Dual Display Bench DMM
899.00
GPIB Version
60 MHz DSO with 20MHz Arb Generator 1,195.00
100 MHz DSO with 40MHz Arb Generator 1,395.00
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
(732) 381-1006
(732) 381-1572
103
OSCILLOSCOPES
4 – IN – 1 INSTRUMENT
LAB BENCH SET-UP
MODEL RSR 4-IN-1
CONTAINS ALL FOLLOWING BENCH
TYPE INSTRUMENTS:
— Sweep Function Generator
— Triple Output Power Supply
— Digital Multimeter
— Oscilloscope
•
•
•
•
Save time AND MONEY by ordering the 4-IN-1
All quality, best selling models included
Simplify your ordering process
Analog and Digital Storage Scope versions
available
• Customized packages available for ten or more
units (add or substitute other models). Call for
custom package quote (10 + required)
DETAILS ON INSTRUMENTS:
FG-32
PHSY3002-3
OSCILLOSCOPES 4 CHANNEL
DIGITAL STORAGE
MODEL DS1074B – 70 MHZ
MODEL DS1104B – 100 MHZ
MODEL DS1204B – 200 MHZ
The DS 1000B is a great value in 4 channel DSO's. The DS
1000B family provides the performance you need with up to 2
GSa/s, up to 200 MHz bandwidth, 16K of memory, update rates
of up to 2000 waveforms per second with other features like LXi
compatibility, Quick Measure and Quick Print buttons, advanced
triggering including logic triggering across all four channels and
the external trigger.
•
•
•
•
DM9803R
•
GOS-620
UP to 200 MHz bandwidth
UP to 50 GSa/s equivalent sample rate
2 (A) and 4 (B) channel models
Ultra compact design, small dimensions, saving valuable desktop
space.
5.7" 64K TFT color LCD, that displays an amazing bright and vivid
pictures.
Versatile trigger modes: Edge, Video, Pulse Width, Slope, Alternativeand Duration.
Pass Fail testing
Adjustable Trigger Sensitivity: Allowing you to have the ability to
filter noise from the signal, helping you avoid false triggers.
Sweep Function Generator – Model FG-32.
Best value, top seller. 3MHz with digital display.
Six waveform functions (sine, triangle, square,
ramp, pulse). Internal/External frequency
counter function
Triple Output Power Supply – Model
GDS1052U
PHSY3002-3. Best value, top seller. DC
outputs are variable 0 ~ 30VDC @ 0 ~ 2
amps (two outputs), and a fixed 5V @ 3
amp.
Digital Multimeter – Model DM9803R. Best value, top seller.
Bench DMM with large, 3 3⁄4 LCD display with back light and 42
segment bar graph. RS232 computer interface included with
software and cable. DC, AC, Resistance, Capacitance, Frequency
functions. AC or DC (battery) operation possible.
Oscilloscope – Model GOS-620 (included with 01RSRANA4).
Best value and top seller in its class. 20MHz, dual channel
analog scope. High sensitivity with ALT trigger function
Oscilloscope – GW Instek Model GDS1052U (included with
01RSRDIG4). 50MHz, 2 channel digital scope
•
Part No.
Description
01RSRANA4
01RSRDIG4
Four-In-One Bench Set-up w/20MHz Analog Scope $750.00
Four-In-One Bench Set-up w/50Mhz Digital Scope
735.00
DIGITAL OSCILLOSCOPE
Price
SCOPE
PROBE
SWITCHABLE
60, 100, 250 MHZ
B.W. DC to 60/100/150 MHz. BNC
to IC Test Hook, with selectable X1,
X10 switch. Includes 1 ea. probe,
spring hook, ground lead, insulating
tip, measuring tip, IC tip, adjusting
tool, channel identifier clips.
Part No.
05SPAK220
05SPAK510
05SPGL250
104
Description
60 MHz
100 MHz
250 MHz
1-9
$13.95
$17.95
21.95
10-99
$11.95
$15.95
19.95
100+
$9.95
$13.95
17.95
•
•
Model
Bandwidth
Real-time
Sample Rate
Equivalent
Sample Rate
Memory Depth
Channels
Part No.
01DS1074B
01DS1104B
01DS1204B
DS1074B
DS1104B
DS1204B
70 MHz
100 MHz
200 MHz
2 GSa/s(half channel*), 1 GSa/s(each channel)
10 GSa/s
25 GSa/s
50 GSa/s
16 kpts(half channel), 8 kpts(each channel)
4 channels + external trigger
Description
Model DS1074B – 70MHz
Model DS1104B – 100MHz
Model DS1204B – 200MHz
Price
$945.00
1,195.00
1,395.00
SMALL PORTABLE 1 CHANNEL 1MHZ / 10 MHZ
Models: DSO 062, DSO 082
Features
• 1MHz bandwidth (5 Ms/s sampling rate)Model-DSO 062
• 10 MHz Bandwidth (50Ms/s sampling rate)
- Model-DSO 082
• 100 mv/div. to 5V/div. sensitivity
- Model-DSO 062
• 10mv/div. to 5V/div. sensitivity
- Model-DSO 082
• 50V peak to peak max. input
• DC/AC coupling
• Probe and adaptor included
• Save / recall up to 4 captures
• FFT with selectable points
(Model-DSO 082)
• Size: 5" x 2.7" x 1.2"; Wt. 5 oz. (DS082)
• Size: 4.3" x 2.6" x 1" Wt. 4.5 oz. (DS062)
Part No.
01DS062
01DS082
DS 062
DS 082
Description
DS062 - 1MHz Oscilloscope
DS082 - 10MHz Oscilloscope
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
Price
69.95
125.00
OSCILLOSCOPES
DIGITAL STORAGE
OSCILLOSCOPES
70 MHZ / 100 MHZ / 200 MHZ / 300 MHZ /
2 CH. / 4 CH.
The 2550 Series digital storage oscilloscopes
deliver performance and
value in 2-channel and
4-channel configurations.
With bandwidth from 70
MHz to 300 MHz and 2
GSa/s sample rates, these
oscilloscopes offer 24 kpts/
Ch waveform memory, 32
automatic measurements,
and advanced triggering
capabilities including math
functions. TFT display offers a significantly larger
viewing area than typical
economy oscilloscopes.
MODELS 2553,
2555, 2557
MODELS 2552, 2554,
2556, 2558
STANDARD FEATURES:
MODEL 2559
• Bandwidth up to 300 MHz
• 2 GSa/s sample rate
• 4-channel acquisition (2553, 2555, 2557, 2559)
• Large 7" widescreen color display
• 32 automatic measurements
• FFT plus four additional math functions
• Built-in context sensitive help system
• PC software that lets you remotely control the oscillo
scope and capture, save, and analyze waveform data
• Front and rear panel USB host port for convenient
storing and recalling of waveform data, setups, and
screenshots on a USB flash drive
• Standard LAN (supports SCPI) and USB device port
(USBTMC compliant) for remote PC control
Part No.
Description
01BK2552
01BK2553
01BK2554
01BK2555
01BK2556
01BK2557
01BK2558
01BK2559
ACCESSORIES
01BKPR150B
01BKPR250B
01BKPR500B
01BKPR2000B
01BKCC510
01BKCC540
01BKPR-60
70 MHZ, 2ch. Ocsilloscope
70 MHz, 4ch. Oscilloscope
100 MHZ, 2ch. Oscilloscope
100 MHz, 4ch. Oscilloscope
200 MHz, 2ch. Oscilloscope
200 MHz, 4ch. Oscilloscope
300 MHz, 2ch. Oscilloscope
300 MHz, 4ch. Oscilloscope
150 MHz Passive Oscilloscope Probe
250 MHz Passive Oscilloscope Probe
500 MHZ Passive Oscilloscope Probe
200 MHz High Voltage Oscilloscope Probe
General Purpose Function Generator Kit
General Purpose Oscilloscope Adapter Kit
Active Differential Probe (25 MHz)
Price
$1,015.00
1,385.00
1,170.00
1,615.00
1,515.00
2,015.00
1,995.00
2,495.00
54.00
64.00
104.00
109.00
169.00
365.00
369.00
DIGITAL STORAGE
SCOPES
GDS 2000A SERIES
WITH FIELD INSTALLABLE LOGIC ANALYZER
& FUNCTION GENERATOR MODULES
Two plug-in
compartments in
the back of these
instruments offer the
economical flexibility to
either add an optional
8 or 16 channel logic
analyzer module,
or a 5MHz function
generator module, or
both. These optional
modules may be added and field-installed at any time.
Using VPO advanced signal processing, this scope series
is capable of examining signals and capturing glitches
without missing any detail. VPO enables the display
of signals to be distinguished based on their recurring
frequencies. Many additional advanced features including
segment memory function, search function and more.
• Field-installable 8 and 16 channel logic analyzer module
to
upgrade to MSO
• Field-installable 5MHz function generator module option
• Built-in segmented memory and waveform search
function
optimizes efficiency of memory length. analyze min, max,
mean with built-in segmented memory
• Dual display with Play/Stop and Zoom window rapidly
navigates waveforms
• Large, 8" high resolution TFT LCD display
• 100Gs/sec equivalent sampling rate, 2Gs/sec real time
• 2M memory
• 80,000 WFM/s waveform update rate
• 26 auto measurement functions
• FFT computing provides Frequency Domain Analysis
Part No.
01GDS2072A
01GDS2074A
01GDS2102A
01GDS2104A
01GDS2202A
01GDS2204A
01GDS2302A
01GDS2304A
01DS28LA
01DS216LA
01DSFGN
01DS2LAN
01DS2GPIB
Description
70 MHz 2 Channel
70 MHz 4 Channel
100 MHz 2 Channel
100 MHz 4 Channel
200 MHz 2 Channel
200 MHz 4 Channel
300 MHz 2 Channel
300 MHz 4 Channel
8 Channel Logic Analyzer Module
16 Channel Logic Analyzer Module
Function Generator Module
LAN
GPIB Interface
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
(732) 381-1006
(732) 381-1572
Price
$836.00
1,434.00
1,143.00
1,694.00
1,626.00
1,962.00
2,385.00
2,877.00
570.00
830.00
245.00
280.00
400.00
105
LOGIC ANALYZERS / OSCILLOSCOPES
PERSONAL SCOPE
LOGIC ANALYZER PORTABLE
MODEL HPS50
Designed By electronics enthusiasts
For electronics enthusiasts! Powerful,
compact and USB connectivity. The
large keyboard and bright LCD makes
this unit a breeze to use.
• 40MHz sampling rate
• 12MHz analog bandwidth
• 0.1mV sensitivity
• 5mV to 20V/div in 12 steps
• 50ns to 1hour/div time base in 34 steps
• Ultra fast full auto set up option
• Adjustable trigger level
• X and Y position signal shift
• DVM readout
• audio power calculation (rms and peak) in 2, 4, 8, 16 & 32
ohm
• dBm, dBV, DC, rms ...measurements
• Signal markers for Volt and Time
• Frequency readout (through markers)
• Recorder function (roll mode)
• Signal storage (2 memories)
• High resolution LCD 192x112 pixels
• LCD backlight
• Galvanically separated USB output for PC
• Data or bitmap download to PC
Part No. 01VHPS50 • Price: $295.00
FEATURES:
• A portable small-sized analyzer
• Easy to use; makes debugging
convenient
• Provides a PC-LINK interface
to observe and print waveforms
using your PC
• 5.6" color TFT display
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
250MHz timing and 100MHz state analysis (LA2025)
500MHz timing and 200MHz state analysis (LA2050)
Saved Waveform: 512K x 32 (LA2025)
Saved Waveform: 1M x 32 (LA2050)
Memory: 2M (LA2025), 4M (LA2050)
Skew: Typically less than 2.0 ns, maximum: 3.0 ns
Speed of scanning: 5s/div – 14 ns/div
Trigger channel: 32CH (8CHx4)
DPI: 1 bit
Trigger signal: 5ns
Various ways to collect data: Single, Run, Autostore
Size: 12.2 x 2.8 x 5.9 (inches)
Weight: 5 lbs.
Power: 90–240 VAC, 50–60 Hz
Package contents: Unit; data pods (4); lead sets (4), test probe
(36); AC cord; USB cable; CD and manual
Part No
01LA2025
01LA2050
Price
$1,850.00
2,695.00
WITH TRUE RMS, AUTORANGING
HANDHELD DIGITAL
SCOPE METER
MODEL SCOPE PLUS 440
MODELS S2401 (1MHZ) AND S2405 (5MHZ)
Versatile, combination unit, featuring a 1 MHz hand-held oscilloscope
plus a wide range of both standard and special DMM functions. Unit
comes complete with rubber holster and stand,
NiCad battery and charger/ adaptor, test leads
and 38 page manual.
With built-in autoranging true RMS DMM
HAND HELD DMM/SCOPE
1 MHZ OSCILLOSCOPE
Glitch Capture (25 ms/s), continuous autoset, real
time display, cursor measurements, flexible triggering, roll mode, optional RS-232 output.
TRUE RMS DMM
• Voltage – 1,000VDC, 5 Ranges;
750VAC, 4 Ranges, True RMS
• Current – 10A AC/DC, 6 Ranges
• Resistance – 40M, 6 Ranges
• Capacitance – 400µF, 6 Ranges
• Frequency – 2 MHz, 5 Ranges
• Diode test, continuity buzzer, component test, logic test, REL function, peak hold, minmax record, compare mode, trend, joystick function selector, auto-ranging, built-in true RMS, 4,000 count display,
back light, on board help text switch
Applications: View industrial signals, capture noise spikes and glitches,
monitor power quality, audio/video, digital circuitry, communications.
Part No.
01OSDM440
01A900
01A402
106
Description
1-4
Model 440 DMM/Scope
$355.00
Soft Carrying Case
21.95
Software & Cable For Scope Plus
59.95
5+
$345.00
20.90
56.95
• Dual channel and auto calibration
• Oscilloscope PE Bandwidth:
DC to 1MHz (S2401)
DC to 5MHz (S2405)
• Sampling Time:
Dual CH Mode: 25Ms/s
Single CH Mode: 50Ms/s
• Automatic setting for horizontal
and vertical division
• Roll and single shot mode
• Excellent internal noise reduction
• Real time update
• 16 shot waveform and setup memories
• Max voltage between input and gound: DC or AC 600Vpeak
• USB interfaces for transferring measurement data and waveform
• DMM Features: DC V: 5V – 1000V
AC V: 3V – 750V
• Resistance: 5K ohm – 5M Ohm
• Continuity buzzer [Frequency (full auto range) 10MHz is for
S2405 only]
• Power Requirement: Ni-MH batteries 4.8V (1.2V x 4 cell)
• Dimensions/Weight: 90 (W) x 195 (H) x 40 (D) mm / 1 lb.
Part No.
01OSS2401
01OSS2405
Description
1MHz Digital Scope Meter
5MHz Digital Scope Meter
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
Price
$399.00
439.00
20MHZ, DUAL CHANNEL
HANDHELD DIGITAL SCOPE
AND DMM
MODEL GDS-122
Equipped with a 3.8" color LCD, this is a
powerful handheld DSO and DMM combined.
The color display helps to clearly show 2
different channel waveforms simultaneously.
With 100 MS/s real-time sampling rate and
Dual Waveform Math (DWM) function it
provides users with fast analyzing capability. 6K memory (per channel) gives this model impressively accurate data-capture to satisfy
diverse industrial requirements. It also serves as a 3 3⁄4 digit, 4,000
count DMM with auto or manual range options. Among many other
features are a self calibration function and free PC software.
•
•
•
•
•
•
•
20MHz, dual channel Digital Storage Scope
100MS/s real-time sampling
6K memory points per channel
Dual Waveform Math (DWM)
5 automatic measurements, cursors, USB and RS232 interface
6 hours running time on battery, charger included
Multimeter functions: voltage, current, resistance, continuity, diode,
capacitance, true RMS
• Isolated inputs between scope and multimeter
Part No. 01GDS122 • Price: $799.00
PORTABLE HANDHELD OSCILLOSCOPE
DSO NANO V3 / USB
The DSO Nano V3 is a pocket-size compatible 32bit digital storage oscilloscope.
Based on ARM -M3, it’s equipped with
320*240 color display, SD card, USB
port and recharging function. It’s compact, simple to operate;
meets the basic demands of school lab, electronic troubleshooting, etc
• Triggering Mode: Auto, Normal
Features:
Single, None
• Portable and lightweight
• Auto Measurement: Frequency,
• Color display
• Waveform storage and playback cycle, duty, Vpp, Vram, Vavg, DC
voltage; Vertical Precise Measure• 6 triggering modes
ment Cursor; Horizontal Precise
• 200Khz Analog Bandwidth
Measurement Cursor ; Rising/
• Built-in Signal Generator
Falling Edge Trigger; Triggering
• Display: 2.8’’ color TFT LCD
Cursor; Triggering Sensitivity Cur• Vertical Sensitivity: 10mv/
Div~10V/Div(x1 probe) 0.5V/
Div~10V/Div(x10 probe)
• Input Resistance: >500KO
• Max. Input Voltage: 80Vpp(x1
probe)400Vpp(x10 probe)
sor; Hold/Run
• Inbuilt Test Signal: 10Hz-1MHz
(1-2-5 stepping)
• PC Connection Interface:
Connection through USB
• Recharging Method: Through
USB interface
• Dimensions: 105mm x 53mm
x8mm
Part No. 01DSONANO • Price $99.50
OSCILLOSCOPES
HANDHELD DIGITAL
SCOPE AND DMM
60 MHZ BW / 2 CHANNELS
• 60 MHz bandwidth with 2 channels
• 150Msa/s real-time sampling rate
• 5 Gsa/s equivalent-time sampling
rate
• Large 5.7" TFT color display
• 6000-count DMM resolution
• USB host/device 2.0 interface
• Memory: 32K single channel, 16K
at dual
• Multi-language support
• Battery power operation
• Vertical: Rise time <5.8ns
• Cursors / Measurements: Vpp, Vmax, Vmin, Vrms, Vbase,
Vmid, preshoot, overshoot
• Time Measurement: Freq., period, rise, fall, width, duty cycle.
• Dimension: 245x163x52mm; 3 lbs
Part No 01DSMM1 • Price: $650.00
OWON HANDHELD OSCILLOSCOPE
20 MHZ SINGLE/DUAL CHANNEL
This is a handheld electrical test device that
combines a 20MHz, handheld digital oscilloscope for viewing electrical signals with a
manual- and auto-ranging digital multimeter
for measuring AC and DC voltage to 400V,
AC and DC current to 10 amp, resistance
to 40 MO, and capacitance to 100 µF. The
oscilloscope has a maximum real-time
sample rate of 100 MS/s and a record length
of 6,000 points per channel for acquiring
detailed waveforms. Its four math functions—
add, subtract, multiply, and divide—plus FFT
(fast Fourier transform) and 20 automatic measurements such
as period, frequency, and peak-to-peak enable an in-depth
analysis of waveforms. Up to four waveforms can be stored in
the internal memory. The multimeter has two ranging modes:
manual, which allows the user to select the operating range,
and auto, which automatically selects the appropriate operating
range. The delta relative function allows a measurement to be
set as a reference value and displays subsequent measurements as a positive or negative deviation from that value, and
the data-hold function freezes a reading on the display to aid
documentation. A continuity buzzer confirms that the circuit conducts electricity, and a diode check detects whether a circuit’s
diodes are working properly. Additional specifications include a
rise time of 17.5 ns and various triggering features. The unit has
a 3.5” color TFT (thin film transistor)
Maximum real-time sampling rate 100 Ms/s & 6,000 points
record length per channel
Part No.
Description
01HDS1021M 20 MHz; single channel
01HDS1022M-N 20 MHz; 2 channel
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
(732) 381-1006
(732) 381-1572
Price
$295
$435
107
OSCILLOSCOPES
POCKET SCOPE HANDHELD
MODEL HPS140I
MODEL PPS10
FEATURES:
• 40Mega samples/sec in real time
• Bandwidth up to 10MHz
• Full auto range option
• Sensitivity down to 0.1mV
• Signal markers for amplitude and time
• Memory Hold function
• Direct audio power measurement
• USB battery charger included
• X10 measuring probe included
• Optional: Carrying Bag BAGPS
Joystick control for true handheld operation. Set all functions
using your thumb. With interface for PC connectivity, it has
10 Ms/s sampling rate, and
2MHz bandwidth with 0.1mV
sensitivity.
SPECIFICATIONS:
• Bandwidth: up to 10 MHz (-3dB or -4dB at selected ranges)
• Input range: 1mV to 20V/division in 14 steps
• Input coupling: DC, AC and GND
• Real-time sample rate up to 40MS/s
• AD resolution: 8 bits
• Time base: 250ns to 1h per division
• Auto set-up function (or manual)
• Probe x10 readout option
• Readouts: DC, AC+DC,True RMS, dBm, Vpp, Min-Max. (±2.5%)
• Audio power measurement from 2 to 32 ohms
• Hold & store function
• Time and Voltage markers readout
• Max. 100Vp AC+DC
• White LED backlight
• Operates on NiMH rechargeable battery pack (included)
• Operates up to 6 hours on one charge*
• Charging power supply: 9Vdc/200mA
• For use on CLASS II pollution degree II installations
• Dimensions: 74 x 114 x 29mm / 2.9 x 4.5 x 1.14"
• Weight: 200g, (7oz)
Part No.
Description
01OSHPS140I
Pocket Scope Hand Held
Price
$169.00
ADVANCED PERSONAL SCOPE
MODEL APS230 - 30MHZ, DUAL CHANNEL
The Advanced Personal Scope
comes complete with two sets
of probes, software CD, cable
to connect to PC and battery
pack. A fast charge is possible,
and you may use the scope
during charging.
•
•
•
•
•
•
•
•
•
2 – input channels. 30MHz bandwidth. 240MS/s per channel sampling
step markers. 8 bit vertical resolution. 30uV min sensitivity
1mV ~ 20V/div volts per div. 25ns ~ 1hr/div time base
AC/DC input coupling. RS232 communication with PC
Dimensions: 9.1” x 5.9” x 2”. 30 oz
Battery pack included. Fast charge possible
High contrast LCD with white backlight
Full auto set-up for volt/div and time/div
Recorder roll mode up to 170h per screen, trigger mode (run, normal,
once, roll), adjustable trigger level and slope
• Peak measurements: max, min, peak to peak
• Measurements: ms, dB(rel), dBV, dBm, dBG. Direct audio power measurements
• Complete with probes, software, cable, battery pack
Part No.
01OSAPS230
Price
$495.00
POCKET, HANDHELD SCOPE
• Measurements: dBm, dBV,
DC, rms ...
• Trigger mode: run, normal,
once, roll, slope +/• X and Y position signal shift
• Audio power calculation (rms
and peak)
• Signal markers for Volt and
Time
• Frequency readout (through
markers)
• Recorder function (roll mode)
• Signal storage (2 memories)
• Full auto set up
• LCD: 128 x 64 pixels / highcontrast
• DVM read-out with x10 option
• Time base: 200ns to 1hour/
div in 32 steps
• 5mV to 20V/div in 12 steps
• 0.1mV sensitivity
• 10Ms/s sampling rate
• Up to 2MHz analogue bandwidth
• Joystick operation
• Optical isolated RS232 output for PC
• Weight: 0.87 lbs.
• 5 – 1.5V AAA battery or
Nicd / NiMH
(not included)
• Includes internal battery
charging circuit
• 9V adapter/300mA optional
(not included)
Part No. 01PPS10 • Price: $165.00
OSCILLOSCOPE
TRAINING KIT
Learn how to get the most out of
your digital oscilloscope. The board
generates a number of safe 'real-world'
signals, which we will use to perform
measurements. Get familiarized with
AC, DC and frequency measurements,
sine and square waves, power supply
ripple, full and half wave rectifiers,
oscillators etc…
Learn what terms such as V/div,
Time/div, trigger level, auto-setup etc…
mean. All experiments featured in this
project are performed with the Velleman HPS140 Handheld Pocket
Scope. Most experiments can be done with any digital storage scope.
Some experiments can be performed with an analog scope.
Features:
• Signals:
• Alternating current (AC)
• Adjustable AC
• Full-and half wave rectified AC
• Smoothed direct current (DC)
• Ripple
• Astable oscillator
• Assembled and tested, no soldering required
Specifications:
• Power supply: 9...12VAC / min.100mA (adapter not incl.)
• Dimensions: 116x74x24mm / 4.6x2.9x0.9"
• Optional: 9VAC /500mA adapter PS905AC
Part No.32VKEDU06 • Price: $29.50
108
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
OSCILLOSCOPES
OSCILLOSCOPE PC BASED
DUAL CHANNEL
2 CHANNEL, 12MHZ BW
40 MHZ / 100 MHZ
MODEL PCSGU250
• USB-powered 2 channel digital
storage scopes.
• Real-time sampling – 100MS/s
and 250Ms/s
• Buffer size 10K ~ 28K.
• Measurements: Vp-p, Vmax,Vmin,
Vmean, Vamp, Vhigh, Vlow,
positive/negative overshoot, cyclemean, cycle rms, period, frequency puls width, ris time (10%
~ 90%), fall time (10% ~ 90 %),
positive negative duty cycle.
Part No.
01DSO2090
01OSDSO2250
Description
40 MHz BW
100 MHz BW
A complete USB-powered lab-in-abox Feature-packed PcLab2000-LT
software for two channel oscilloscope, spectrum analyser,
recorder, function generator and
bode plotter. With the generator, you
can create your own waveforms using the integrated signal wave editor. For
automated measurements, it is even possible to generate wave sequences,
using file or computer RS232 input.
Price
$199.00
319.00
2-CHANNEL USB PC
OSCILLOSCOPE, 60MHZ
MODEL PCSU1000
The PCSU1000 digital storage oscilloscope uses the power of your PC to
visualize electrical signals. Its high sensitive
display resolution, down to 0.15mV, combined with a high bandwidth and sampling
frequency up to 1GHZ give this unit all the power you need.
The USB connection makes this PC based instrument a snap to
set-up, no external power required! In-the-field measurements,
using a lap-top, have never been this easy. Comes in a stylish
vertical space saving design.
Powerful software will fulfill all your needs, but for those who like a
challenge; a DLL is supplied, which allows you to create your own
application.
• Inputs: 2 channels, 1 external trigger input
• Input impedance: 1Mohm // 30pF
• Bandwidth: DC to 60 MHz "3dB
• Max. input voltage: 30V (AC + DC)
• Input coupling: DC, AC and GND
• Supply from USB port (500mA)
• Minimum system requirements:
• IBM compatible PC
• Needs Win98SE or higher
• SVGA display card (min. 800x600, 1024x768 recommended)
• Mouse
• USB port 1.1 or 2.0 compatible
• CD Rom player
Includes:
• USB PC oscilloscope
• 2 x 60MHz scope probe
• USB cable
• Software on CD
• Getting started manual
• Translations on CD
Part No. 01OSPCSU1000 • Price: $379.00
PC OSCILLOSCOPE /
FUNCTION GENERATOR
• Oscilloscope:
– BW: DC to 12MHz
– auto set-up function and
X10 option
– pre-trigger function
– readouts: True RMS, dBV,
dBm, p to p, Duty cycle,
Frequency
– Sampling frequecy: Up to
25Mhz
• Function Generator
– Crystal-based stability
– Standard waveforms: sine,
square and triangle
– Predefined library waveforms included: sine(x)/x,
DCV, sweep
• Spectrum Analyser:
– Linear or logarithmic
timescale
– Operating principle: FFT (Fast
Fourier Transform)
– FFT input channel: CH1 or CH2
– Zoom function
• Bode Plotter:
– Automated sync between oscilloscope and generator
– Logatithmic scale option
– Volt or dB display scale
– Phase plot option
• Transient Recorder
• System Requirements
– IBM compatible PC
– Windows™ 2000, XP, Vista
Part No. 01PCSGU250 • Price: $195.00
USB PC OSCILLOSCOPE
WITH SIGNAL GENERATOR
Features
• Function generator:
crystal-based stability
standard waveforms: sine, square
and triangle predefined library wave
forms 1 included: sine(x)/x, sweep,...
• Oscilloscope:
auto set-up function and X10 option
pre-trigger function readouts: True
RMS, dBV, dBm, p to p, Duty cycle,
Frequency persistence options: color
Graded, Variable and Infinite
• Transient recorder:
automatic data storage automatic recording for more than 1 year
recording and display of screensrecording and display of screens
• Bode Plotter:
automated sync between oscilloscope and generator
logatithmic scale option
Volt or dB display scale
phase plot option
• Spectrum analyzer:
linear or logarithmic time scale
operating principle: FFT (Fast Fourier Transform)
FFT input channel: CH1 or CH2
zoom function
• Includes:
getting started manual
USB PC Scope+generator unit
USB cable
Part No. 01PCSU200 • Price: $149.00
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
(732) 381-1006
(732) 381-1572
109
OSCILLOSCOPES
HANDHELD DIGITAL
SCOPE AND DMM
SCOPEMETER® OSCILLOSCOPES
MODELS 190-062, 062/S, 190-202, 202/S
60 MHZ BW / 2 CHANNELS
Part No 01DSMM1 • Price: $650.00
As the first two and fourchannel portable scopes
safety rated CAT III 1000V /
CAT IV 600V, the new Fluke
ScopeMeter®190 Series II
combines an unprecedented
level of performance,
ruggedness, and portability.
You can choose from
60MHz, 100MHz or 200MHz
bandwidth models, both with
real-time sampling rates
up to 2.5 GS/s and 400 ps
resolution to capture noise and other disturbances. Both models
feature deep memory—up to 10,000 samples per channel— so
you can examine very small parts of the waveform in detail. And
both are IP-51 rated to withstand dust, drips, humidity, and wide
temperature variations. Fluke ScopeMeter test tools are handheld battery operated, designed to meet the demands of field
service professionals.
HANDHELD DIGITAL STORAGE
OSCILLOSCOPE SCOPE METER®
Part No.
01FLK190-062
01FLK190-062/S
• 60 MHz bandwidth with 2 channels
• 150Msa/s real-time sampling rate
• 5 Gsa/s equivalent-time sampling
rate
• Large 5.7" TFT color display
• 6000-count DMM resolution
• USB host/device 2.0 interface
• Memory: 32K single channel, 16K
at dual
• Multi-language support
• Battery power operation
• Vertical: Rise time <5.8ns
• Cursors / Measurements: Vpp, Vmax, Vmin, Vrms, Vbase,
Vmid, preshoot, overshoot
• Time Measurement: Freq., period, rise, fall, width, duty cycle.
• Dimension: 245x163x52mm; 3 lbs
40 MHZ WITH DMM
The compact ScopeMeter 120 Series is the
rugged solution for industrial troubleshooting
and installation applications. It’s a truly
integrated test tool, with oscilloscope,
multimeter and “paperless recorder in one
affordable, easy-to-use instrument. Find
fast answers to problems in machinery,
instrumentation, control and power
systems.
• Dual-input 40 MHz or 20 MHz digital
•
•
•
•
•
•
•
•
•
•
•
oscilloscope
Two 5,000 counts true-RMS digital multimeters
Automatic measurements
A dual-input TrendPlot™ recorder
Connect-and-View™ trigger simplicity for hands-off operation
Shielded test leads for oscilloscope, voltage, resistance and
continuity measurements
10:1 Voltage Probe included with Fluke 124 and 125 for high
frequency measurements
Up to 7 hours battery operation
600 V CAT III safety certified
Optically-isolated interface for PC connection
Rugged, compact case
Fluke 125 gives bus health and power measurements
Part No.
01FK124
01FK124S
110
Detailed Specs Available Upon Request
Description
40MHz Scopemeter®
40MHz Scopemeter® w/Software,
Case & RS232 Cable
01FLK190-202
01FLK190-202/S
Description
Fluke 190-062 ScopeMeter® (60MHz)
Fluke 190-062 ScopeMeter® (60-MHz)
with SCC-290 kit included
Fluke 190-202 ScopeMeter® (200MHz)
Fluke 190-202 ScopeMeter® (200MHz)
Price
$2,895
3,385
3,690
4,295
with SCC-290 kit included
HANDHELD DIGITAL STORAGE
OSCILLOSCOPE SCOPE METER®
• 1.25GS/sec repetitive sampling rate
• Connect-and-View™ hands-off operation
• Dual channel TrendPlot™ for “cause & result” troubleshooting
• Single test leads for all measurements – waveform display, multiple meter readings, capacitance, resistance
and continuity
• Optical-to-RS232 interface port, 600V isolation
• 2-channel, True RMS, 5000 count DMM
This 20MHz digital storage scope is the ideal choice for technicians troubleshooting industrial machinery, instrumentation, control and power systems
including: AC/DC motor drives, sensors and actuators, power lines, transformers and converters, and analog and digital control loops. The patented
Connect-and-View hands-off operation saves time in fault finding by providing a stable, reliable, and repeatable display of signals without touching a
button. Works for even the most complex signals including motor drives and
video. Dual channel TrendPlot tracks intermittents by recording readings
from minutes to days with time and date stamped minimum and maximum
readouts. The built-in dual channel DMM measures VDC, True RMS VAC,
AC/DC current, resistance, frequency, capacitance, temperature, continuity,
diode, duty cycle, pulse width, phase A to B, crest factor, dBV and dBm.
Detailed Specs Available Upon Request
Price
$1,715.00
2,095.00
Part No.
01FK123
01FK123S
Description
20MHz Scopemeter®
20MHz Scopemeter® w/Software,
Case & RS232 Cable
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
Price
$1,395.00
1,850.00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement