null  null
Before operating this unit,
please read this Owner's Manual carefully
GOODMANS HELPLINE 0870 8730080
INTRODUCTION
This instruction manual is important to you. Please read it. In a short time shows exactly how to connect,
operate, and adjust this unit for best performance.
It can save you money. It shows simple things to do and check before you call for help and can save the
cost of unnecessary service or call out charge.
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. DANGEROUS FIGHT VOLTAGES ARE PRESENT
INSIDE THE ENCLOSURE, DO NOT OPEN THE CABINET. REFER SERVICING TO
QUALIFIED PERSONNEL ONLY.
Please retain all packaging material for future transportation of the unit or in the unlikely event that the
unit needs to be returned for service.
SOME DO'S AND DON'TS ON THE SAFE USE OF EQUIPMENT
This equipment has been designed and manufactured to meet European safety standards but like any
electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.
IMPORTANT SAFEGUARDS
PRE FITTED MAINS PLUGS
For your convenience a mains plug with a fuse has been fitted to this appliance. For your safety please
observe the following information.
1. Should the fuse fail in the plug remove the plug from the wall socket and replace the fuse with a 3
Amp ASTA approved to BS1362 fuse.
2. Never use the plug without the fuse cover fitted. Replacement fuse covers are available from your
dealer or most electrical retail outlets.
3. If the mains plug is cut off from the cable, rewire the replacement plug in accordance with the
instruction given in this manual.
4. CAUTION: Under no circumstances should the discarded plug be inserted into the mains socket.
To prevent a shock hazard carefully dispose of the discarded plug. Do not leave the plug lying
around where children might see it.
WARNING: To prevent fire of shock hazard do not expose this unit to rain or moisture.
CAUTION:
DO read the operating instructions before you attempt to use the equipment.
DO ensure that all electrical connections ( including the mains plug, extension leads and interconnections
between piece of equipment ) are properly made in accordance with the supplied instructions. Switch off
and withdraw the mains plug when making or changing connections.
DANGEROUS VOLTAGES EXIST INSIDE THIS UNIT, DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL. DISCONNECT FROM MAINS SUPPLY WHEN NOT IN USE.
MAINS PLUG WIRING DETAILS
accordance with the following wiring codes:
E
DO consult your dealer if you are ever in doubt about the installation, operation, or safety of your equipment.
L
BROWN
DO be careful with glass panels or doors on equipment.
DON'T continue to operate the equipment if you are in any doubt about it working normally, or if it is
damaged, in any way - switch off, withdraw the mains plug and consult your dealer.
BLUE
FUSE
N
Cord Grip
DON'T remove any fixed cover as this may expose dangerous voltages.
The wires in this mains lead are coloured in
accordance with the following wiring codes:
Blue
Neutral
Brown
live
The wires in this mains lead must be connected to
the terminals in the plugs as follow:
Blue Wire
N or Black
Brown Wire
L or Red
Only a 3 Amp fuse should be fitted in the plug or a
5 Amp fuse at the distribution board.
DON'T leave equipment switched on when it is unattended unless it is specifically stated that it is designed
for unattended operation or has a standby mode. Switch off using the switch on the equipment and make
sure that your family knows how to do this. Special arrangements may need to be made for infirm or
handicapped people.
DRIPPING WARNING
The product shall not be exposed to dripping or splashing and that no objects filled with liquids, such as
vases, shall be placed on the product.
DON'T listen to headphones at high volume, as such use can permanently damage your hearing.
VENTILATION WARNING
The normal ventilation of the product shall not be impeded for intended use.
DON'T obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating
will cause damage and shorten the life of the equipment.
WARNING:
DON'T use makeshift stands and never fix legs with wood screws - to ensure complete safety always fit the
manufacturer's approved stand or legs with the fixings provided according to the instructions.
DON'T allow electrical equipment to be exposed to rain or moisture.
Above all
NEVER let anyone, especially children, push anything into holes, slots or any other openings in the
case this could result in a fatal electric shock.
NEVER guess or take chances with electrical equipment of any kind.
It is better to be safe than sorry!
-1-
UNDER NO CIRCUMSTANCES MUST THE LIVE OR NEUTRAL WIRES BE CONNECTED
TO THE EARTH TERMINAL IN A 3-PIN MAINS PLUG.
This symbol means that this unit is double insulated.
An earth connection is not required.
LASER SAFETY
CAUTION
CLASS 1 LASER PRODUCT
This unit employs a laser. Only qualified service
Use of Controls or adjustments or performance of personnel should attempt repair.
procedures other than those specified herein may
DANGER: INVISIBLE LASER
result in hazardous radiation exposure.
RADIATION WHEN OPEN AND
INTERLOCK FAILED OR DEFEATED.
CLEANING
AVOID DIRECT EXPOSURE TO BEAM.
Always disconnect unit from power supply before
attempting to clean it.
CAUTION: HAZARDOUS LASER
Use soft cloth moistened with soapy water, wipe
RADIATION WHEN OPEN AND
gently.
INTERLOCK DEFEATED.
Do not use solvents or abrasive materials.
-2-
SPEAKER BOX INSTALLATION
Disassemble Adapter Bracket
If you wish to place subwoofer and main-unit separately, we suggest to
remove the adaptor-plate for better looking.
Release 8 pcs mounted screws by screw-driver then take out the adaptor
bracket as per the below drawing.
6 pcs SELF TAPPING SCREW
ITEM
1
DESCRIPTION
SELF TAPPING SCREW
TAPPING/WH HEAD
-3-
QUANTITY
6 PCS
-4-
LOCATION OF CONTROLS
MAIN UNIT FRONT
1
1. POWER button
Power on/off button to switch the system on
2. CD door
3. CD DOOR OPEN/CLOSE button
While the unit is on, press the button OPEN/
CLOSE to open the cover in CD mode. And you
can insert or remove CD
4. LCD Display
5. CD button
To activate operating mode CD
6.
CD PLAY/PAUSE button
To start CD playback/short interruption of CD
playback
7.
CD STOP button
interrupting the CD playback/clearing the CD
program
8. Tune/Skip/Search
or
button
Manual forward or backward tuning to stations,
station search operation/CD forward or
backward title selection/CD forward or
backward search operation
9. D-BASS button
To get the rich bass sound
10. Press EQ button
To select “FLAT, ROCK, JAZZ, POP and
CLASSIC” desired sound effect
11. TAPE button
To activate operating mode TAPE
12. RADIO/BAND button
To activate operating mode TUNER and to
select the reception band
13. Cassette door
14. Cassette Control Keys cover (Open/Close
push area)
15. Cassette Control buttons (Inside Cover)
Cassette control key buttons (RECORD, PLAY,
REW, F.FWD, STOP/EJECT. PAUSE)
16. Subwoofer ON/OFF switch
To switch subwoofer on or off (the subwoofer
light located right below the switch will be
lighted up when the subwoofer is turned on.)
17. Microphone jack (3.5mm)
18. Phones jack (3.5mm)
19. REMAIN/MODE button
To toggle CD display between the individual
playback and remain time/switching to time
display (TIMER ON/OFF) / current time
25
24
23
22
21
20
19
18
17
LOCATION OF CONTROLS (CONT.)
2
3
MAIN UNIT BACK
4
5
6
7
26
27
8
9
10
11
12
13
14
15
16
29
31
28
32
30
33
37
34
35
36
20. TIMER button
To activate / deactivate the timer
(see Timer section)
21. MEMORY/CLOCK ADJ. button
Tuner memory button/CD program button/clock
setting button
22. AUX button
To activate operating mode AUX
23. VOLUME UP + and DOWN - button
To adjust desired volume
24. IR indicator
25. STANDBY indicator
-5-
26. Battery compartment (3 x "AA" size or UM3
batteries for back-up Tuner memory and
clock)
27. AUX INPUT socket
For connection of an additional audio appliance
28. FM Antenna wire
29. BEAT CUT switch
Uses to reduce the oscillation sound in AM
(MW) record onto the cassette
30. RESET switch
If the set does not display information, or the
data appearing are wrong, press the “RESET”
switch with a sharp object, e.g. needle or ball
point pen. The data must then be re-entered.
31. Subwoofer Output socket
32. Speaker L & R socket
33. Main Unit AC cord
34. Subwoofer Input socket
35. Subwoofer Volume Control knob
36. Subwoofer AC cord
37. Speaker
-6-
LOCATION OF REMOTE CONTROLS
Remote Control
OPERATING INSTRUCTION
POWER ON/OFF
38 39 40 41 42
1. Press the POWER button (1) or (54) to turn the
unit 'ON'.
POWER
Note: The LCD display illuminate.
43
56
44
55
45
46
47
2. You can now select your desired music source
by pressing one of the function buttons CD (5),
TAPE (11), RADIO/BAND (12), AUX (22) or
(55).
NOTE : When TAPE mode is selected, "TAPE"
will show in the display.
3. To switch to POWER OFF, press the POWER
button (1) or (54) to turn the unit 'OFF'.
POWER
54
53
52
51
38. Remote Control Transmitter
39. RANDOM button
CD playback in random sequence
40. MEMORY/CLOCK ADJ. button
Tuner memory/CD memory/Clock setting.
41. INTRO button
Plays 10 sec. Of each CD track
42. MEMORY-UP/REPEAT button
Step-wise activating the programmed
transmitting stations in increasing order/Repeat
function for CD mode
43. REMAIN/MODE button
To toggle CD display between the individual
playback and remain times/switching to time
display (TIMER ON/OFF)/current time
44. STEREO/MONO button
Stereo/mono switching for FM stations
45. MUTE button
Sound pause, to switch off the sound
reproduction
46. PRESET EQ button
To select FLAT, ROCK, JAZZ, POP and
CLASSIC
47. D-BASS button
To get the rich bass sound
50
49
48
48. VOLUME Up + and Down - buttons
To adjust to the desired volume
49. CD DOOR OPEN/CLOSE button
Open and close the CD door in CD mode
50.
PLAY/PAUSE button
To switch on operating mode CD, start CD
playback/short interruption of CD playback
51.
STOP button
Interrupting the CD playback/Clearing the CD
program memory
52.
CD Skip-Search, Tuning +/
CD Skip-Search, Tuning Manual tuning to stations, station search
operation/CD reverse, forward title selection/CD
reverse, forward search operation
53. BAND button
To select the radio reception band
54. POWER button
Switches the unit to and from standby mode
55. FUNCTION MODE button
To select CD/TAPE/TUNER-BAND/AUX
56. 0 - 9, +10 NUMERIC buttons
To recall TUNER preset stations/to recall CD
tracks
-7-
SETTING THE TIME
When the unit is first connected to an AC OUTLET the display shows "0:00". To set the clock to the current
time proceed as follow:
1. During unit at off mode, press the MEMORY/CLOCK
ADJ. button (21)/(40) once, the hour digits begin to
flash.
MEMORY/CLOCK ADJ.
2. Press the CD SKIP Forward or Backward
buttons (8) or (52) to adjust the hour.
3. Press the MEMORY/CLOCK ADJ. button (21) /
(40) again, the minute digits begin to flash.
MEMORY/CLOCK ADJ.
4. Press the CD SKIP Forward or Backward
buttons (8) or (52) to adjust the minute.
MEMORY/CLOCK ADJ.
5. Press the MEMORY/CLOCK ADJ. button (21) /
(40) once more, the display stops flashing and
the clock begins to run.
-8-
TIMER ON/OFF SETTING
NOTE: The clock should be adjusted before Timer On/Off setting.
1. Press the REMAIN/MODE button (19)/(43)
once, the TIMER ON indicator begin to flash.
13. Press the MEMORY/CLK ADJ. button (21)/(40)
once more, then the Timer Off adjustment is
finished with the "OFF" display keep turning ON.
14. To cancel the Timer Off setting, press REMAIN/
MODE button (19)/(43) until Timer Off setting
mode, the "OFF" display keep turning ON.
Press TIMER button (20) to cancel Timer Off
setting, the "OFF" display will flash.
2. Press the MEMORY/CLK ADJ. button (21)/(40)
once, the hour digits begin to flash.
Timer ON/OFF displays:
Note: After setting Timer On and/or Timer off,
press MODE/REMAIN to return to current time
in standby mode.
3. Press the CD SKIP forward or backward
buttons (8) or (52) to adjust the hour.
BASIC OPERATION
Electronic volume control
4. Press the MEMORY/CLK ADJ. button (21)/(40)
again, the minute digits begin to flash.
Switching the display
Pressing REMAIN/MODE button (19)/(43)
during the power Off mode results in the
following changes:
Electronic volume control display
5. Press the CD SKIP forward or backward
buttons (8) or (52) to adjust the minute.
Clock
Pressing MODE/REMAIN button during the
CD playing mode results in the following
changes.
1. Press VOL-UP or DOWN button (23)/(48) to
increase or reduce the volume, the volume
level will be shown in the LCD display (4)
6. Press MEMORY/CLK ADJ. button (21)/(40)
once more, then the Timer On adjustment is
finished with the "ON" display keep turning ON.
Playing time
2. Holding down the VOL UP/DOWN button
will result in continuous increase or
decrease of the volume.
7. To cancel the Timer On setting, press REMAIN/
MODE button (19)/(43) until Timer On setting
mode, the "ON" display keep turning ON.
Press "TIMER" button (20) to cancel Timer On
setting, the "ON" display will flash.
Remaining
time
Clock
Timer On
Setting
Timer Off
Setting
Pressing MODE/REMAIN button in the tuner
mode results in the following changes.
Muting Function
If the MUTE button (45) is pressed, the audio output
will be muted, and "VOL 0" is shown for 1 second.
Note: To resume Timer ON/OFF setting, similar
operation by using TIMER button
Timer Off
Setting
Timer On
Setting
Tuning display
Clock
Timer On
Setting
Timer Off
Setting
Pressing MODE/REMAIN button in the tape
mode results in the following changes.
8. To set Timer Off, press the REMAIN/MODE
button (19)/(43) until the TIMER OFF indicator
begin to flash.
Tape
Then return to the original display. "VOL 0" will
appear for every 4 seconds. One more press the
button will resume the volume.
9. Press the MEMORY/CLK ADJ. button (21)/(40)
once, the hour digits begin to flash.
Subwoofer Control
Press subwoofer ON/OFF (16) button to switch on
the subwoofer (Note: Make sure the voltage is
correct before plug in AC cord to outlet). Rotate
volume (35) control knob to clockwise (higher vol.
level) or anti-clockwise (lower) until desired volume
obtained.
11. Press the MEMORY/CLK ADJ. button (21)/(40)
again, the minute digits begin to flash.
12. Press the CD SKIP forward or backward
buttons (8) or (52) to adjust the minute.
-9-
Timer On
Setting
Timer Off
Setting
Pressing MODE/REMAIN button in the AUX
mode results in the following changes.
Line
(AUX)
10. Press the CD SKIP forward or backward
buttons (8) or (52) to adjust the hour.
Clock
-10-
Clock
Timer On
Setting
Timer Off
Setting
LISTENING TO THE RADIO
PLAYING COMPACT DISCS
1. Press the POWER button (1)/(54) to turn the
system 'ON'.
1. Switch on the power and press the CD button
(5)/(55) to select the CD mode.
4. Press the TUNING UP or DOWN buttons (8) or
(52) to tune to the desired station.
2. Press the RADIO/BAND button (12)/(55) to
select the radio function.
To play the disc
Press PLAY/PAUSE button (6)/(50) to play the CD.
Reading TOC
Playing track 1
Example : FM mode
Manual Tuning - Press and hold the TUNING
UP or DOWN buttons (8) or (52) until the
display approaches your desired station. Then
tap the buttons repeatedly until the display
shows the exact frequency.
Auto tuning - Press the TUNING forward or
backward buttons momentarily and release.
The tuner will move up or down to the next
available station.
3. Press the RADIO/BAND button (12) or (55) or
(53) [BAND] repeatedly to select AM (MW) or
FM band.
TUNER/BAND
5. When finished listening, press the POWER
button (1)/(54) to shut the system OFF.
2. If there is no CD inside, a "DISC" display will
appear.
When there is no disc
To pause the playing
Press PLAY/PAUSE button during the disc is
playing, the playing time will flash.
While paused
Loading a disc
1. Press the DOOR OPEN button (3)/(49) one
time to open the CD door.
To stop the disc playing
STORING PRESET STATIONS
1. Tune to the station you wish to store.
Press STOP button (7)/(51).
Stop condition (TOC display)
The unit enables you to program 20 stations of FM
and 12 stations of AM band.
2. Press the MEMORY button (21)/(40) once.
4. Press the MEMORY button (21)/(40) again. The
station is stored.
2. Put a disc inside and then press the DOOR
OPEN button one time to close the CD door.
After that, reading TOC will start.
After reading TOC
5. To store other stations, repeat above steps.
3. Press the MEM-UP/REPEAT button (42) or
enter desired numeric buttons directly on remote
control repeatedly to set the desired preset
station number.
RECALLING PRESET STATION
Press the MEM-UP/REPEAT (42) button on
remote control repeatedly to select the desired
station.
REPEAT
Note: This unit is CD-R/RW compatible.
Skip and Search Function
Press the SKIP forward or backward buttons (8) or (52) momentarily.
MEMORY UP
PRESET EQUALIZATION
Press the PRESET EQ button (10)/(46) repeatedly
to cycle through the preset EQ show on the LCD
display -- FLAT, ROCK, JAZZ, POP and CLASSIC.
X-Bass function
Press the D-BASS button (9)/(47), the BassBoosted mode can be set. Once more press this
button can cancel the D-Bass.
Headphones socket
Headphones socket “PHONES” (18) for
headphones with 16-32 Ohm impedance (3.5mm
jack). Use corresponding adaptors (specialist
shops) if you have different plugs. The speakers are
automatically switched off when the headphones
are being used.
CAUTION:
Listening at high power for a long moment could
damage users’ ears.
-11-
Mic mixing function
1. Select the desired mode (CD/Tape/Tuner/
AUX). Connect microphone plug to MIC
socket (17).
2. Place microphone away from the sound
source.
3. If howling occurs, decrease volume or remove
microphone as far as possible from the
speakers.
IN PLAY MODE
PRESS ONCE
PRESS TWICE
BACK TO THE
BEGINNING OF
PREVIOUS
THE CURRENT
TRACK
TRACK
NEXT TRACK
IN STOP MODE
PRESS ONCE
PREVIOUS
TRACK
NEXT TRACK
Press and hold the SKIP button during playback :
: FAST FORWARD
: FAST BACKWARD
NOTE : During the search mode low level audio will be heard to assist in locating the
correct point in the track.
-12-
To repeat a track or disc
Press MEM-UP/REPEAT button (42) on remote
control one time, "one track repeat" will be
active.(REPEAT Flashing)
With one more press, "all track repeat" will be active.
(REPEAT steady on)
With one further press, the repeat mode is cancelled.
One track repeat (flashing)
PLAYING CASSETTE TAPE
PLAYBACK
1. Switch on the power and press the TAPE button
(11)/(55).
3. To playback, press down the PLAY button.
All track repeat
Random play function
Press RANDOM button (39) on remote control in
stop mode then PLAY/PAUSE to start random play.
Press once again to change normal playing mode.
Random playing start
Intro play function
During the stop condition, pressing the INTRO
button (41) on remote control then PLAY/PAUSE to
start the intro playing. After that the first 10 seconds
of each song will be played.
If the INTRO button is pressed again, the CD will
change to normal playing mode.
2. Open the cassette key cover by pushing the
OPEN/CLOSE area of Cassette Cover (14) to
reveal the cassette buttons (15). Press STOP/
EJECT button to open the cassette door. Insert
a prerecorded tape with exposed tape
downwards and full spool to the left, closed the
cassette door.
4. To stop Playback, press down the STOP/
EJECT button
To suspend playback
To Fast Forward or Rewind tape
Press down PAUSE button.
Press down REW or F.FWD button.
Intro playing
PROGRAMMED PLAYBACK
The CD player enables you to program up to 16 tracks in a sequence of your choice. First select CD stop
mode.
1. Press the MEMORY button (21)/(40) one time.
5. Pressing PLAY/PAUSE button (6)/(50) to play
the program tracks.
Program input mode
Note: If the program is already exit (MEMORY
indicator still turned on), press the PLAY/
PAUSE button, the program play will start
again.
2. Press the SKIP forward or backward buttons
(8) or (52) to select the desired track to be
programmed.
Clear the program
Press the STOP button (7)/(51) in stop mode until
MEMORY indicator goes off on LCD display in
order to cancel the preset programs.
Choose track 4
3. Pressing MEMORY button one time, then track
4 is stored
To resume playback, press the PAUSE button
again.
TAPE RECORDING From TUNER
1. Press the RADIO/BAND button (12)/(55) to
select the TUNER mode.
2. Follow steps 1, 2, 3 and 4 in "LISTENING TO
THE RADIO" to tune in the station you wish to
record.
3. Insert a blank tape to cassette compartment
with exposed tape downward and full spool to
the left and then close the cassette door.
4. Press down the RECORD and PLAY buttons to
start recording.
TAPE RECORDING From CD - Synchronized
Recording from CD player
1. Switch on the power, press the CD button (5)/
(55) to select the CD mode and than open the
CD door by pressing DOOR OPEN CD button
(3)/(49).
2. Put a disc inside and then press the CD DOOR
OPEN button one time to close the CD door.
3. Insert a blank tape to Cassette section cassette
compartment with exposed tape downward and
full spool to the left then close the cassette
door.
4. Press down the RECORD and PLAY button to
start recording, CD will start play automatically
from beginning of track 1 or other tracks
(currently playing).
5. Press STOP/EJECT button to stop recording.
5.
4. Continue to program, repeat steps 2 and 3.
Reviewing programs
Press the MEMORY button repeatedly. The
track number programmed on each program
number will be displayed.
-13-
Press STOP/EJECT button to stop recording
and CD playback will stop too.
Note: 1. Return to Tape mode, rewind the tape to listen to recorded materials.
2. Recording from AUX mode or through microphone (Tape mode): similar to
above descriptions.
-14-
CARE AND MAINTENANCE
TROUBLESHOOTING GUIDE
Should this unit exhibit a problem, check the following before seeking service.
COMPACT DISC CARE
Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to come in
contact with the shiny, unprinted side of the disc.
Do not attach adhesive tape, stickers etc., to the disc label.
Clean the disc periodically with soft, lint-free, dry cloth. Never use detergents or adhesive cleaners
to clean the disc. If necessary, use a CD cleaning kit.
If disc skips or gets stuck on a section of the disc, it is probably dirty or damaged (scratched).
When cleaning the disc, wipe in straight lines from the centre of the disc to the edge of the disc.
Never wipe in circular motions.
To remove a disc from its storage case, press down on the centre of the case and lift the disc outs,
holding it carefully by the edges.
Fingerprints and dust should be carefully wiped off the disc's recorded surface with a soft cloth.
Unlike conventional records. compact disc have no grooves to collect dust and microscopic debris
so gently wiping with a soft cloth should remove most particles.
Symptom
Possible cause
Radio
Noise or sound distorted on AM or Station not tuned properly for AM Retune the AM or FM broadcast
station.
or FM
FM broadcasts.
FM : Line antenna is not extended. Extend FM line antenna.
FM STEREO indicator does not
light
AM or FM, no sound.
Rotate unit until best reception is
AM : Unit is not positioned
obtained.
correctly.
FM MODE button is set to MONO Set FM MODE to FM STEREO
position.
position.
TUNER Function button is not Press TUNER function button.
pressed.
Volume at minimum
Cassette Player
No sound.
Sound distorted.
TAPE HEAD CLEANING
Speed varies
The tape heads, pinch roller and capstan require periodic cleaning. This removes particles of the metal oxide
costing that wear off the tape and accumulate on these parts and impair performance. Switch off the power,
press the Stop/Eject Key to open the cassette door, and press the Play Key. Clean the tape heads, pinch roller
and capstan with a soft cloth or cotton swab dampened in isopropyl alcohol or special tape head cleaner.
NOTE: Never use any metal objects on or near the tape heads. Do not allow any cleaning material to fall into
the tape assembly.
Cassette Recorder
Will not record.
Distorted sound on playback.
Compact Disc Player
CD Player will not play.
CAPSTAN
COTTON SWAB
RECORD/PLAY HEAD
PINCH ROLLER
CLEANING THE UNIT
Increase Volume.
TAPE Func tion button is not Press the TAPE Function button.
pressed.
Increase Volume
Volume at minimum
Clean the head.
Dirty head.
Tape old or worn.
Dirty roller and capstan.
Replace the tape.
Clean roller and capstan.
Press prevention tab removed
Cover hole with tape
Defective tape or dirty tape head.
Replace tape or clean tape head
CD Function button is not pressed. Press the CD Function button.
CD is not installed or installed
Insert CD with label side out.
incorrectly.
CD skips while playing.
Disc is dirty or scratched.
Wipe disc with cloth or use
another disc.
Disc is inserted but CD player
skips over spot and will not play,
Disc inserted upside down.
Insert disc properly.
Disc is dirty.
Clean disc.
Disc is non-standard.
Use correct disc.
To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.
The finish on the unit may be cleaned with a dust cloth and cared for as other furniture, Use caution
when cleaning and wiping the plastic parts.
If the cabinets become dusty wipe them with a soft dry dust cloth. Do not use any wax or polish
sprays on the cabinets.
If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth
slightly dampened with a mild soap and water solution. Never use abrasive cloths or polishes as
these will damage the finish of your unit.
Caution: never allow any water or other liquids to get inside the unit while cleaning.
-15-
Solution
-16-
SPECIFICATION
GENERAL
Power requirement
Power consumption
Weight
Dimension of:
Main unit
Speaker
Operation temperature
IMPORTANT NOTES
AC 230V~50Hz
DC 4.5V “AA” size/UM-3 x 3 pcs for Tuner MEMORY back up
DC 3V “AA” size/UM-3 x 2 pcs for Remote Handset
AC 40Watts
Approx. 17.1Kg
Approx. 260mm(W) x 809mm(H) x 250mm(D)
Approx. 260mm(W) x 800mm(H) x 260mm(D)
+5 C - +35 C
RECEIVER SECTION
Receiving bands
Tuning range
AM(MW)/FM
AM(MW) 522-1620KHz
FM 87.5 -108MHz
Frequency response
Compact Disc Digital Audio
4 times over sampling,
1 bit D/A converter.
100 - 20,000 Hz
CASSETTE SECTION
Recording system
Biasing system
Frequency response
Wow and flutter
4 tracks 2 channel stereo
AC bias, magnet erase
125 - 6300Hz
0.35% WRMS (JIS)
AUDIO SECTION
Power output
Speaker impedance
Headphones impedance
AUX input sensitivity
Maximum 7.5 Watts per channel
Subwoofer: 15 Watts
3 ohms
8 - 32 ohms
0.5V
ACCESSORIES
Instruction Booklet
Remote Control Handset
Subwoofer cord
ESTABLISH A SAFE SOUND LEVEL
Over time your heating will adapt to continuous loud sounds and will give the impression that
the volume has in fact been reduced. What seems normal to you may in fact be harmful.
To guard against this BEFORE YOUR HEARING ADAPTS set the volume at a level.
Slowly increase the level until you can hear comfortably and clearly and without distortion.
Damage to your hearing is accumulative and is irreversible.
Any ringing or discomfort in the ears indicates that the volume is too loud.
Remember listening for prolonged period of time at high volume levels will harm your
hearing.
Once you have established a comfortable listening level, DO NOT INCREASE THE
SOUND LEVEL FURTHER.
CD PLAYER SECTION
Playback system
DAC
Hearing is very important to you and to us so please take care when operating this equipment.
It is strongly recommended that you follow the listed guidelines in order to prevent possible
damage or loss of hearing.
1
1
1
The following list of typical sound levels may assist you in recognizing just how loud you have
set the volume level.
DECIBEL
Level (dB)
30dB
40dB
50dB
60dB
70dB
Example
Quiet library, soft whisper.
Living room, fridge freezer bedroom away from traffic.
Normal conservation, quiet office, light traffic.
Electric sewing machine.
Vacuum cleaner, hair dryer, noisy restaurant.
THE FOLLOWING NOISE CAN BE HARMFUL UNDER CONSTANT EXPOSURE
80dB
90dB
100dB
120dB
Average city traffic, alarm clock buzzer at 2 feet, food mixer.
Motorcycle, heavy goods vehicle, petrol lawn mower.
Pneumatic drill, chair saw, garbage truck, discotheque/night-club.
Rock band concert, thunderclap fast train passing by.
PERMANENT LOSS OF HEARING
140dB
THRESHOLD OF PAIN Gunshot 2 feet away, jet plane taking off.
Goodmans Helpline 0870 8730080
-17-
-18-
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement