VS-3 INSTRUCTIONS 2
INSTRUCTIONS w
Thank you for purchasing the VS-3 Bluetooth headset.
This headset is compatible with Bluetooth В® operation, and includes a [PTT] switch.
Please read these instructions carefully and completely before using.
Transmit from a transceiver using the VS-3
В®
Bluetooth HEADSET
В®
VS-3
This section describes how to transmit from a transceiver
using the VS-3.
First, set the frequency and the operating mode.
Microphone
qqWhile holding down [PTT], speak to transmit.
Connecting the headset to other Bluetooth device
В®
[PTT]
• When transmitting, the LED alternately blinks red once and blue
twice.
wwRelease [PTT] to receive.
Pairing is a process to be able to establish a connection between a headset and other Bluetooth В® devices. Once pairing is
established with the device, there is no need to pair again.
• The indications or operation may differ, depending on the Bluetooth® devices. See the instruction manuals of the devices for
details.
• The headset operation may differ, depending on the connected device’s profile.
• If the paring fails, turn OFF the headset, and then repeat from step q.
For your reference:
When the One-touch PTT function is set to ON on the transceiver, pushing [PTT] toggles transmitting and receiving.
When the transceiver’s VOX function is set to ON, you can
use the headset for hands-free operation.
See the transceiver’s instruction manual for details.
In this manual, a transceiver with the Bluetooth® unit is described as simply “transceiver.”
Enter “0000” (four zeros), if a Passkey (PIN code) is required.
NOTE:
You may not find a target BluetoothВ® device, if there are many other BluetoothВ® devices nearby. In that case, stop using those
devices or move away from them.
Hands-free operation with your BluetoothВ® mobile device
This section describes how to use the hands-free operation with your BluetoothВ® mobile device.
When connecting to a transceiver
When connecting to a BluetoothВ® mobile device
Making a call
Answering a call
qqIf the power is OFF, push
[PWR] for 6 seconds.
qqIf the power is OFF, push [PWR] for 6 seconds.
qqMake a call on your mobile device.
wwPush [FWD].
➥➥When a ring tone sounds, push [PWR].
• A melody sounds when the
power is turned ON.
• The LED alternatively blinks
red and blue, and then the
headset enters the pairing
mode.
LED indicator
[PWR]
wwSetting a transceiver.
Turn ON the transceiver’s Bluetooth® function, and then
pair with the VS-3.
Example: When using the ID-5100A/E
qTurn ON the transceiver.
wTouch [MENU].
eTouch “Bluetooth.”
(Bluetooth setting > Bluetooth)
rTouch “ON.”
tTouch “Pairing/Connect.”
yTouch “Device Search.”
uTouch “Search Headset.”
• “ICOM BT-002” is displayed on the transceiver’s display.
iTouch “ICOM BT-002.”
oTouch [YES].
• Starts the connection.
eeCheck the LED status.
• When the connection is completed, the LED blinks blue.
• When the connection is completed, “(Connect)” is displayed on
the transceiver’s screen.
• A melody sounds when the power is turned ON.
• The LED alternatively blinks red and blue, and then the headset
enters the pairing mode.
wwSetting your mobile device.
➥➥ Turn ON the mobile device’s Bluetooth® function, and
then pair with the VS-3.
• See the mobile device’s instruction manual for details.
eeCheck the LED status.
• You can communicate with the hands-free operation.
•T
he LED blinks twice in blue in every 5 seconds.
•D
epending on the connected mobile device, you may not be
able to use the hands-free operation.
eePush [FWD].
• Returns to the normal operation mode.
• You can communicate with the hands-free operation.
• The ring tone sounds even if your mobile device is in the manner mode.
NOTE:
If you hold down [PWR] for more than 3 seconds, the headset power is turned OFF.
• When the connection is completed, the LED blinks blue.
Disconnecting
NOTE:
Some mobile device may not be able to pair with the VS-3.
You may not be able to use some BluetoothВ® features, depending on the mobile device.
Automatic Power OFF function
After disconnecting, or if no BluetoothВ® device is found after
the power is turned ON, the VS-3 automatically turns OFF
after 5 minutes.
When the VS-3 is not connected to any device, even if the
power is ON, the LED blinks blue.
[FWD]
LED indicator
➥➥Push [PWR].
Playing music
Functions
The following list shows the VS-3s functions, operation, sound and the LED indications.
To play music, the BluetoothВ® device must correspond to the A2DP profile.
Confirm your Bluetooth® device’s profile.
Connecting to the transceiver with a BluetoothВ® unit
The supplied earphone is not for listening to music.
We recommend that you purchase a third party earphone to listen to music.
Playing or Pausing music
Playing next music
qqSelect the music that you want to play in your mobile device.
wwPush [PLAY].
➥➥Push [FWD].
• While playing music, push [PLAY] to pause.
• While playing music, the LED blinks blue twice every 2 seconds.
Stopping music
Playing previous music
➥➥While stopping music, push [RWD].
• While playing music, the LED blinks twice in blue in every 2
seconds.
➥➥While playing or pausing music, push [PLAY] to
stop.
[FWD]
• Music starts from the beginning by pushing the play switch after
the music stops.
[PLAY]
Rewind music
[RWD]
LED indicator
➥➥While playing or pausing music, push [RWD] to rewind.
Forward music
➥➥While playing or pausing music, push [FWD] to forward.
[PWR]
• While holding down [RWD], the headset continues to rewind.
• While holding down [FWD], the headset continues to forward.
NOTE:
The operation may differ, depending on the BluetoothВ® device or music player application.
You may not be able to use some BluetoothВ® functions, depending on the BluetoothВ® device.
Initializing the headset
LED indicator
• If the power is ON, hold down [PWR] for 3 seconds.
• The LED lights purple, and then turns OFF.
Sound
LED indication
Note
Melody sounds
Blinks blue
(Scale goes up.)
Turning OFF the power Hold down [PWR] for 3 seconds. Melody sounds
Turns OFF
(Scale goes down.)
Pairing
While the power is OFF, hold down PiPa–
• Alternatively blinks red and blue
[PWR] for 6 seconds.
while waiting for a connection.
• Blinks blue twice every 3 secPiRo
onds when the connection is
completed.
Switching to the mobile While using the transceiver con- Pi
Blinks blue twice
Automatically switch to
device
nected to a mobile device, hold
the transceiver when the
down [PWR] for 2 seconds.
transceiver receives a
signal.
Transmission
Push [PTT]
—
Alternatively blinks red once and
blue twice every 3 seconds.
†Volume up
Push [+]
Long beep
Blinks twice in blue
Sounds when a maxi(High tone)†mum level is selected.
‡
Volume down
Push [–]
Long beep
Blinks blue twice
Sounds when a mini(Low tone)‡
mum level is selected.
Increase the MIC gain*1 Push [+] while holding down [PTT]. PiPiPi
—
Decrease the MIC gain*1 Push [–] while holding down [PTT]. Pi
—
Pi
Blinks blue twice
Select the item in the opChanging the frequency, Up: Push [
]
erating screen.
Memory or Call channel.*2 Down: Push [
]
Switching between FROM
and TO selection.*2
Play/Pause*2
Push [≈� ]
Pi
Blinks blue twice
Pi
Blinks blue twice
Forward*2
Push [
]
Rewind*2
Push [
]
Push [RESET]
Refer to instruction manual q
Forcibly shutdown
Charging
Pi
Blinks blue twice
—
—
Turns OFF
Lights red
When the connection is disconnected from the transceiver, two beeps sound.
*1 The MIC gain has three levels. When the level 3 is selected, 3 beeps sound, the level 2 is selected, 2 beeps sound, and the level 1 is selected,
a bees sounds.
*2 You can assign these key functions from the transceiver.
Function
Turning ON the power
qqTurn OFF the power.
wwAfter holding down [PWR] for 2 seconds, simultaneously
hold down both [PWR] and [VOL](–) for 10 seconds.
Operation
Hold down [PWR] for 3 seconds.
Connecting to the BluetoothВ® mobile device
If abnormalities occur on the headset, turn OFF the power,
and then turn it ON again after a few seconds. If the condition
continues, initialize the headset.
Function
Turning ON the power
[VOL](–)
[PWR]
[PWR]
After holding down
for 2 seconds
Hold down for
10 seconds
Forced termination
If the headset does not operate normally, try the following to
perform a force power OFF.
Sound
LED indication
Melody sounds
Blinks blue
(Scale goes up.)
Turning OFF the power Hold down [PWR] for 3 seconds. Melody sounds
Turns OFF
(Scale goes down.)
Pairing
While the power is OFF, hold down PiPa–
• Alternatively blinks red and blue
[PWR] for 6 seconds.
while waiting for a connection.
• Blinks blue twice every 3 secPiRo
onds when the connection is
completed.
Switching to the trans- Push [PTT].
Pi
ceiver
Making a call
Push the power switch
Receiving a call
Push the power switch
—
Blinks blue twice every 3 seconds.
Disconnecting a call
Push the power switch
Volume up
Push [+]
Long beep
Blinks blue twice.
(High tone)†Volume down
Push [–]
Long beep
Blinks blue twice.
(Low tone)‡
Play/Pause
Push [≈� ]
Pi
Blinks blue twice.
Stop
Push [≈� ]
Pi
Blinks blue twice.
Forward
]
Push [
Rewind
➥➥Push [RESET].
Forcibly shutdown
Charging
Operation
Hold down [PWR] for 3 seconds.
Pi
]
Push [
Push [RESET]
—
Refer to the instruction manual q —
Note
ounds when a maxiS
mum level is selected.
‡
Sounds when a minimum level is selected.
†Blinks blue twice.
Turns OFF.
Lights red.
When the VS-3 is connected to both a paired transceiver and the mobile device, the transceiver has priority. However, when you push [PWR]
while operating the transceiver, the connection switches to the mobile device. Pushing [PTT] returns to the transceiver connection.
[RESET]
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
A-7139W-2EX
Printed in Japan
В© 2014 Icom Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement