PeopleSoft 8.4 eProcurement PeopleBook - Oracle Documentation

PeopleSoft 8.4 eProcurement PeopleBook - Oracle Documentation
PeopleSoft 8.4 eProcurement
PeopleBook
PeopleSoft 8.4 eProcurement PeopleBook
SKU Fr84SEPV-B 0302
PeopleBooks Contributors: Teams from PeopleSoft Product Documentation and
Development.
Copyright В© 2002 PeopleSoft, Inc. All rights reserved.
Printed in the United States.
All material contained in this documentation is proprietary and confidential to PeopleSoft,
Inc. ("PeopleSoft"), protected by copyright laws and subject to the nondisclosure provisions
of the applicable PeopleSoft agreement. No part of this documentation may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, including, but not
limited to, electronic, graphic, mechanical, photocopying, recording, or otherwise without the
prior written permission of PeopleSoft.
This documentation is subject to change without notice, and PeopleSoft does not warrant that
the material contained in this documentation is free of errors. Any errors found in this
document should be reported to PeopleSoft in writing.
The copyrighted software that accompanies this document is licensed for use only in strict
accordance with the applicable license agreement which should be read carefully as it
governs the terms of use of the software and this document, including the disclosure thereof.
PeopleSoft, the PeopleSoft logo, PeopleTools, PS/nVision, PeopleCode, PeopleBooks,
PeopleTalk, and Vantive are registered trademarks, and "People power the internet." and Pure
Internet Architecture are trademarks of PeopleSoft, Inc. All other company and product
names may be trademarks of their respective owners. The information contained herein is
subject to change without notice.
Contents
PeopleSoft 8.4 eProcurement PeopleBook Preface
PeopleSoft Application Fundamentals ..............................................................................xv
Common Elements Used in This PeopleBook...................................................................xv
Delivered ChartFields ............................................................................................. xviii
Pages With Deferred Processing ..................................................................................... xxi
About This PeopleBook
Before You Begin........................................................................................................... xxii
PeopleSoft Application Fundamentals ............................................................................ xxii
Related Documentation ................................................................................................. xxiii
Hard-copy Documentation...................................................................................... xxiii
PeopleBooks Standard Field Definitions....................................................................... xxiii
Typographical Conventions and Visual Cues..................................................................xxv
Pages Used to <process name> ..................................................................................... xxvi
Open Source Disclosure ................................................................................................ xxvi
Comments and Suggestions.......................................................................................... xxvii
Chapter 1
Getting Started With PeopleSoft eProcurement
PeopleSoft eProcurement Business Processes................................................................. 1-1
PeopleSoft eProcurement Integrations ............................................................................ 1-1
Implementing PeopleSoft eProcurement ......................................................................... 1-2
Setting Up PeopleSoft Global Application Tables.................................................... 1-2
Setting Up Core PeopleSoft eProcurement Tables ................................................... 1-4
Setting Up Additional PeopleSoft eProcurement Tables .......................................... 1-6
Chapter 2
Using PeopleSoft eProcurement Administration
Understanding eProcurement Administration ................................................................. 2-1
Common Elements Used in This Chapter................................................................. 2-1
Accessing the Administration and Maintenance Pages ................................................... 2-2
Page Used to Access the Administration and Maintenance Pages............................ 2-2
Accessing the Administration and Maintenance Pages............................................. 2-2
Using the Setup Guides ................................................................................................... 2-4
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CONTENTS
iii
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Pages Used to Use the Setup Guides......................................................................... 2-5
Accessing the Procurement Setup Guide - Default Page .......................................... 2-6
Configuring Administration and User Pages ................................................................... 2-6
Pages Used to Configure Administration and User Pages ........................................ 2-6
Configuring the Maintain the Administration Page .................................................. 2-7
Defining Second-Level Links for the Administer Procurement Main Page ............. 2-8
Configuring the eProcurement Homepage and the Buyer Station Page.................... 2-9
Setting Up Installation Options and Enabling Attachments .......................................... 2-10
Pages Used to Set Up Installation Options and Enable Attachments...................... 2-10
Defining File Server Location URLs ...................................................................... 2-11
Setting Up eProcurement Installation Options........................................................ 2-11
Maintaining System Users and Roles ............................................................................ 2-13
Pages Used to Maintain System Users and Roles ................................................... 2-13
Attaching Role Actions to User Roles .................................................................... 2-14
Maintaining Business Units........................................................................................... 2-15
Pages Used to Maintain Business Units.................................................................. 2-15
Creating a PeopleSoft Purchasing Business Unit.................................................... 2-18
Associating Business Units, SetIDs, and Record Groups ....................................... 2-18
Defining PeopleSoft General Ledger Business Units ............................................. 2-19
Maintaining Codes......................................................................................................... 2-19
Page Used to Define Purchasing Codes .................................................................. 2-19
Defining Purchasing Codes..................................................................................... 2-19
Maintaining Procurement Options................................................................................. 2-20
Pages Used to Maintain Procurement Options........................................................ 2-20
Assigning Catalogs to a Purchasing Business Unit................................................. 2-21
Setting Up Instructions for the Return to Vendor Page........................................... 2-22
Maintaining Vendors ..................................................................................................... 2-22
Pages Used to Maintain Vendors ............................................................................ 2-22
Entering the URL for a Vendor’s Website.............................................................. 2-23
Chapter 3
Using Workflow Processes in PeopleSoft eProcurement
Understanding PeopleSoft Workflow.............................................................................. 3-1
Configuring PeopleSoft Workflow.................................................................................. 3-2
Common Elements Used in This Section.................................................................. 3-2
Pages Used to Configure PeopleSoft Workflow ....................................................... 3-3
Setting Up and Using the Receipt Notification Workflow........................................ 3-4
Using the Return to Vendor Exchange Workflow .................................................... 3-6
Using Workflow to Request a Procurement Card ..................................................... 3-7
Setting Up and Using Workflow for Change Request Approvals............................. 3-7
CONTENTS
iv
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Configuring PeopleSoft Workflow With PeopleSoft eProcurement ............................... 3-8
Common Elements Used in This Section................................................................ 3-10
Pages Used to Configure PeopleSoft Workflow With PeopleSoft eProcurement .. 3-11
Defining Workflow Rule ........................................................................................ 3-11
Defining Workflow Rule Steps............................................................................... 3-12
Defining Workflow Step Criteria............................................................................ 3-13
Defining Workflow Rule Assignments................................................................... 3-14
Configuring the PeopleSoft eProcurement Workflow Builder...................................... 3-15
Pages Used to Configure PeopleSoft eProcurement Workflow Builder................. 3-16
Using the PeopleSoft eProcurement Workflow Builder ......................................... 3-17
Configuring PeopleSoft eProcurement Requisition Approval Workflow ..................... 3-18
Pages Used to Configure PeopleSoft eProcurement Requisition Approval
Workflow ................................................................................................................ 3-20
Running the Initialize Workflow Process ............................................................... 3-20
Using the Requisition Approval Process................................................................. 3-21
Using the Workflow Notification Process .............................................................. 3-21
Viewing Additional Requisition Approvals............................................................ 3-22
Chapter 4
Creating Requisitions in PeopleSoft eProcurement
Understanding Requisitions............................................................................................. 4-1
Common Elements Used in This Chapter................................................................. 4-1
Creating Requisitions ...................................................................................................... 4-4
Pages Used to Create a Requisition .......................................................................... 4-4
Selecting Requisition Business Units and Requesters .............................................. 4-6
Creating a Requisition............................................................................................... 4-7
Reviewing Item Information and Checking Price and Availability.......................... 4-8
Editing Requisition Defaults..................................................................................... 4-9
Adding a Requisition Justification.......................................................................... 4-11
Creating Requisitions With the Requisition Navigator ................................................. 4-11
Pages Used to Create Requisitions With the Requisition Navigator....................... 4-12
Changing the Shipping Address.............................................................................. 4-13
Changing Distribution Information......................................................................... 4-13
Searching for Items........................................................................................................ 4-14
Pages Used to Search for Items............................................................................... 4-14
Searching and Browsing for Items.......................................................................... 4-15
Using Advanced Search Options ............................................................................ 4-18
Reviewing Item Details........................................................................................... 4-20
Editing Line Information............................................................................................... 4-21
Pages Used to Edit Line Information...................................................................... 4-21
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CONTENTS
v
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Changing Shipping Information.............................................................................. 4-23
Creating a One-Time Shipping Address ................................................................. 4-23
Editing the Cost Distribution................................................................................... 4-24
Editing Line Details ................................................................................................ 4-25
Adding Line Comments .......................................................................................... 4-26
Setting Up and Using Attachments................................................................................ 4-26
Pages Used to Set Up and Use Attachments ........................................................... 4-27
Setting Up Attachments .......................................................................................... 4-28
Using Attachments .................................................................................................. 4-28
Chapter 5
Using Favorites
Understanding the Favorites List..................................................................................... 5-1
Managing Your Favorites List......................................................................................... 5-1
Pages Used to Manage Your Favorites List .............................................................. 5-2
Adding Items to Your Favorites List......................................................................... 5-2
Deleting Items From Your Favorites List ................................................................. 5-3
Adding Favorites to a Requisition ................................................................................... 5-3
Pages Used to Add Favorites to a Requisition .......................................................... 5-3
Adding Favorite Items to a Requisition .................................................................... 5-4
Chapter 6
Using Item Templates
Understanding Item Templates........................................................................................ 6-1
Common Elements Used in This Chapter ................................................................. 6-1
Creating Item Templates.................................................................................................. 6-2
Pages Used to Create Templates ............................................................................... 6-2
Creating Personal Templates..................................................................................... 6-2
Deleting Personal and Company Templates ............................................................. 6-3
Using Item Templates to Create Requisitions ................................................................. 6-4
Pages Used to Create Requisitions From Item Templates ........................................ 6-4
Adding a Template to a Requisition.......................................................................... 6-5
Viewing Company Templates................................................................................... 6-6
Viewing Personal Templates..................................................................................... 6-6
Chapter 7
Using Special Requests
Understanding Special Requests...................................................................................... 7-1
Common Elements Used in This Chapter ................................................................. 7-1
Requesting Special Goods ............................................................................................... 7-2
CONTENTS
vi
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Pages Used to Request Special Goods...................................................................... 7-3
Requesting Special Services............................................................................................ 7-3
Pages Used to Request Special Services................................................................... 7-3
Selecting the Service Type........................................................................................ 7-4
Requesting a Fixed Cost Service............................................................................... 7-4
Requesting a Variable Cost Service.......................................................................... 7-5
Requesting Materials................................................................................................. 7-5
Searching for and Suggesting a Vendor .......................................................................... 7-5
Pages Used to Search for and Suggest a Vendor ...................................................... 7-6
Searching for a Vendor ............................................................................................. 7-6
Suggesting a Vendor ................................................................................................. 7-7
Chapter 8
Direct Connect Supplier Integration
Understanding Direct Connect Supplier Integration ....................................................... 8-1
Setting Up Direct Connect Supplier Integration.............................................................. 8-2
Pages Used to Setup Direct Connect Supplier Integration........................................ 8-2
Contacting the Supplier for Authentication Data...................................................... 8-4
Adding the PeopleSoft Vendor Definition................................................................ 8-4
Setting Up Third Party Vendors................................................................................ 8-4
Setting Up the Merchant Profile Component............................................................ 8-5
Synchronizing Shared Data to Prevent Validation Errors......................................... 8-6
Associating Item Categories With Returned Values and Editing Merchant
Information for Direct Connect Suppliers ....................................................................... 8-7
Pages Used to Associate Item Categories With Returned Values and Edit
Merchant Information ............................................................................................... 8-8
Associating Item Categories With Returned Values................................................. 8-8
Using Punchout for Direct Connect Supplier Integration................................................ 8-9
Creating a PeopleSoft eProcurement Requisition Using Punchout ........................ 8-10
Chapter 9
Creating Express Forms
Understanding Express Forms......................................................................................... 9-1
Common Elements Used in This Chapter................................................................. 9-1
Creating Express Forms................................................................................................... 9-1
Page Used to Create Express Forms ......................................................................... 9-2
Creating Express Form Profiles ................................................................................ 9-2
Designing Express Forms ......................................................................................... 9-3
Creating Business Card Express Orders for Requisitions ............................................... 9-4
Pages Used to Create Business Card Express Orders for Requisitions..................... 9-5
Entering Data for Business Card Orders................................................................... 9-5
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CONTENTS
vii
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Chapter 10
Using MarketPlace with PeopleSoft eProcurement
Understanding the Integration Between MarketPlace and PeopleSoft eProcurement ... 10-1
Prerequisites................................................................................................................... 10-3
Common Elements Used in This Chapter ............................................................... 10-3
Integrating MarketPlace with PeopleSoft eProcurement ............................................... 10-4
Pages Used to Integrate MarketPlace with PeopleSoft eProcurement .................... 10-4
Setting Up the Connection To MarketPlace............................................................ 10-5
Setting Up MarketPlace Suppliers .......................................................................... 10-6
Setting up MarketPlace Buyers ............................................................................... 10-6
Determining the SetIDs Defined as MarketPlace Buyers ....................................... 10-9
Loading MarketPlace Catalog Items Into PeopleSoft eProcurement............................. 10-9
Pages Used to Load MarketPlace Catalog Items Into PeopleSoft eProcurement.. 10-11
Extract Data From the MarketSite CUP File......................................................... 10-14
Exporting CUP Data.............................................................................................. 10-16
Importing Item Catalogs........................................................................................ 10-17
Validating and Processing Imported Items ........................................................... 10-18
Editing CUP Item Categories................................................................................ 10-18
Using CUP Item Statuses ...................................................................................... 10-19
Using CUP Item Categories .................................................................................. 10-20
Loading MarketPlace Items Into PeopleSoft Item Tables..................................... 10-20
Loading MarketPlace Items .................................................................................. 10-21
Downloading Item Attachments............................................................................ 10-22
Using Price and Availability Check............................................................................. 10-23
Sending PeopleSoft eProcurement Purchase Orders to MarketPlace .......................... 10-24
Page Used to Send PeopleSoft eProcurement Purchase Orders to MarketPlace... 10-26
Processing MarketPlace Orders ............................................................................ 10-26
Chapter 11
Using Procurement Cards in PeopleSoft eProcurement
Understanding PeopleSoft eProcurement Procurement Cards....................................... 11-1
Setting Up Procurement Cards ...................................................................................... 11-2
Pages Used to Set Up Procurement Cards............................................................... 11-3
Setting Up the Procurement Card Provider............................................................. 11-5
Defining the PCard Provider’s File Layout............................................................. 11-5
Defining Parameters for the Auto Reconcile Process ............................................. 11-6
Setting Up the Procurement Card User ................................................................... 11-6
Requesting Issuance of a Procurement Card........................................................... 11-7
Defining Ghost Cards.............................................................................................. 11-7
Using a Procurement Card on a Requisition.................................................................. 11-8
CONTENTS
viii
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Processing Procurement Card Transactions ................................................................ 11-10
Running Procurement Card Processes......................................................................... 11-13
Pages Used to Run Processes for Procurement Card Transactions....................... 11-14
Loading Procurement Card Transactions.............................................................. 11-14
Reconciling Bank Statement Charges................................................................... 11-14
Chapter 12
Managing Requisitions
Understanding Requisition Management ...................................................................... 12-1
Common Elements Used in This Chapter............................................................... 12-1
Maintaining Requisitions............................................................................................... 12-3
Pages Used to Maintain Requisitions...................................................................... 12-3
Maintaining Requisitions ........................................................................................ 12-4
Viewing Requisitions Details.................................................................................. 12-5
Viewing Line Details .............................................................................................. 12-6
Approving Requisitions................................................................................................. 12-7
Page Used to Approve Requisitions........................................................................ 12-7
Approving Requisitions by Using the Manage Approvals Page............................. 12-7
Prerequisites............................................................................................................ 12-8
Using Wireless Workflow Approver ...................................................................... 12-8
Chapter 13
Using the Buyer Station
Understanding the Buyer Station................................................................................... 13-1
Common Elements Used in This Chapter............................................................... 13-2
Linking to Buyer Tasks and Managing Purchase Orders .............................................. 13-3
Pages Used to Link to Buyer Tasks and Manage Purchase Orders......................... 13-3
Managing Purchase Orders ..................................................................................... 13-4
Reviewing Requisitions Created by Employees ..................................................... 13-4
Reviewing and Changing Staged Purchase Order Details ...................................... 13-5
Reviewing Suggested Vendors ............................................................................... 13-6
Using the Quick Sourcer................................................................................................ 13-6
Pages Used for the Quick Sourcer .......................................................................... 13-7
Entering Parameters for the AutoSelect Requisitions Process................................ 13-7
Entering Parameters for the PO Calculations and Create Purchase Order
Processes ................................................................................................................. 13-8
Accessing Vendor Tables, Item Tables, and Item Definitions .................................... 13-10
Page Used to Access Vendor Tables, Item Tables, and Item Definitions............. 13-10
Accessing Vendor Tables, Item Tables, and Item Definitions.............................. 13-10
Accessing Inquiries and Reports ................................................................................. 13-10
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CONTENTS
ix
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Pages Used to Access Inquiry Pages and Reports................................................. 13-11
Accessing Inquiry Pages and Reports ................................................................... 13-11
Analyzing PeopleSoft eProcurement Information Using Bar Graphs ......................... 13-11
Page Used to Generate and Display the Graphs.................................................... 13-15
Generating and Displaying PeopleSoft eProcurement Bar Graphs....................... 13-15
Chapter 14
Dispatching Purchase Orders in PeopleSoft eProcurement
Understanding Dispatching Purchase Orders ................................................................ 14-1
Dispatching Purchase Orders......................................................................................... 14-3
Pages Used to Dispatch Purchase Orders................................................................ 14-3
Selecting Purchase Orders Manually for Dispatch.................................................. 14-4
Sending Dispatched Purchase Orders to Vendors................................................... 14-4
Viewing Status and Messages for Your Purchase Order......................................... 14-5
Viewing Messages Entered on the Purchase Order Line ........................................ 14-7
Sending Purchase Orders to Vendors by EDX .............................................................. 14-7
Prerequisites ............................................................................................................ 14-7
Page Used to Send Purchase Orders to Vendors By EDX ...................................... 14-8
Defining Batch Publishing Rules .......................................................................... 14-10
Assigning Chunk Rules to Vendors ...................................................................... 14-10
Mapping Nodes to Chunk Rules ........................................................................... 14-10
Publishing Purchase Order Messages.................................................................... 14-11
Using the Message Monitor Component ..................................................................... 14-11
Pages Used to Access the Message Monitor Component ..................................... 14-12
Chapter 15
Using Change Requests and Change Orders
Understanding PeopleSoft eProcurement Change Requests.......................................... 15-1
Adding a Change Request.............................................................................................. 15-3
Pages Used to Add a Change Request..................................................................... 15-4
Selecting Requisition Lines to Create a Change Request ....................................... 15-5
Entering a Change Request ..................................................................................... 15-5
Entering a Reason for a Change Request ................................................................ 15-5
Entering Changes to a Line of a Dispatched Purchase Order ................................. 15-5
Entering a Change Request for Purchase Order Shipment Information.................. 15-6
Viewing Change Requests............................................................................................. 15-6
Pages Used to View Change Requests.................................................................... 15-7
Monitoring Change Requests .................................................................................. 15-7
Viewing Purchase Order Change Requests............................................................. 15-7
Approving a Change Request ........................................................................................ 15-8
CONTENTS
x
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Pages Used to Approve a Change Request ............................................................. 15-8
Viewing Change Requests That Need Approval .................................................... 15-9
Reviewing and Approving Change Requests.......................................................... 15-9
Converting a Change Request to a Change Order ....................................................... 15-10
Pages Used to Process a Change Request to a Change Order............................... 15-11
Chapter 16
Receiving Stock and Returning Items to the Vendor
Overview of Receiving Stock........................................................................................ 16-1
Receiving Items by Amount ................................................................................... 16-2
Using Receipt Notification Workflow .................................................................... 16-2
Using Options for Receiving Stock ........................................................................ 16-2
Common Elements Used in This Chapter............................................................... 16-3
Receiving Stock As a Casual User ................................................................................ 16-3
Pages Used to Receive Stock As a Casual User ..................................................... 16-4
Selecting Items to Receive...................................................................................... 16-6
Adding or Changing a Receipt................................................................................ 16-6
Rejecting Shipments ............................................................................................... 16-8
Reviewing and Adding Asset Information to an Item ............................................ 16-8
Generating Tag Numbers ........................................................................................ 16-9
Generating Serial Numbers................................................................................... 16-10
Entering the Location for an Item ......................................................................... 16-10
Viewing Recorded Receipts.................................................................................. 16-11
Returning Items to the Vendor .................................................................................... 16-12
Pages Used to Return Items to the Vendor ........................................................... 16-13
Initiating a Vendor Return .................................................................................... 16-13
Viewing and Changing the Vendor’s Ship To Address ........................................ 16-14
Viewing Recorded RTV Entries ........................................................................... 16-15
Receiving Stock As a Power User............................................................................... 16-15
Page Used to Receive Stock As a Power User...................................................... 16-16
Viewing Recorded Receipts.................................................................................. 16-18
Chapter 17
Integrating With PeopleSoft HRMS
Understanding PeopleSoft eProcurement and HRMS Integration ................................ 17-1
Preparing to Use HRMS Integration ............................................................................. 17-3
Setting Up HRMS to eProcurement Synchronization Application Messages............... 17-4
Setting Up Publish and Subscribe Rules for PeopleSoft Resource Management
Application Messages.................................................................................................... 17-4
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CONTENTS
xi
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Chapter 18
Implementing Item Searches
Understanding Item Searches ........................................................................................ 18-1
Implementing the Verity Search Engine........................................................................ 18-1
Enabling the Verity Search Engine ......................................................................... 18-3
Configuring Tuxedo IPC Helper Service for Multiple NT Servers ........................ 18-6
Creating and Updating the Verity Search Collection .................................................... 18-7
Page Used to Create or Update the Collection ........................................................ 18-7
Creating and Updating the Verity Search Collection.............................................. 18-7
Setting Up and Running the Verity Search Update Daemon Program ................... 18-8
Implementing Item Attribute Searches .......................................................................... 18-8
Importing and Working With Attributes ..................................................................... 18-12
Pages Used to Import and Work With Attributes.................................................. 18-12
Importing Attributes From a Flat File ................................................................... 18-13
Verifying Imported Attributes............................................................................... 18-15
Assigning Cross-References to Attribute Names.................................................. 18-16
Chapter 19
Cohera Catalog Management Integration
Understanding the Cohera Integration........................................................................... 19-1
Prerequisites ............................................................................................................ 19-2
Common Element Used in This Chapter................................................................. 19-2
Integrating the Cohera Catalog Management System With PeopleSoft eProcurement. 19-3
Pages Used to Integrate the Cohera Catalog Management System With
PeopleSoft eProcurement ........................................................................................ 19-3
Setting Up the Database Connection to Cohera ...................................................... 19-4
Configuring the Cohera Connection ....................................................................... 19-4
Setting Up Cohera Suppliers As Linked Suppliers ................................................. 19-5
Loading Cohera Catalogs Into PeopleSoft eProcurement.............................................. 19-5
Pages Used to Load Cohera Catalogs Into PeopleSoft eProcurement..................... 19-6
Extracting Data From Cohera Tables...................................................................... 19-7
Importing Cohera Categories .................................................................................. 19-7
Loading Cohera Catalogs ........................................................................................ 19-8
Validating and Processing Imported Items ............................................................. 19-8
Chapter 20
Appendix: PeopleSoft eProcurement Reports
PeopleSoft eProcurement Reports: General Description............................................... 20-1
PeopleSoft eProcurement Reports........................................................................... 20-1
Common Elements Used in This Appendix ............................................................ 20-5
CONTENTS
xii
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
PeopleSoft eProcurement Reports: A to Z..................................................................... 20-5
PVY2000 - Catalog Item Usage Report.................................................................. 20-5
PVY 4000 - PO Item Category Usage Report ........................................................ 20-5
Glossary
Index
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CONTENTS
xiii
PeopleSoft 8.4 eProcurement
PeopleBook Preface
The book provides you with the information you will need for implementing and using
PeopleSoft eProcurement.
This section discusses:
•
PeopleSoft application fundamentals.
•
Common elements used in this PeopleBook.
•
Pages with deferred processing.
PeopleSoft Application Fundamentals
The PeopleSoft eProcurement PeopleBook provides you with implementation and processing
information for your PeopleSoft eProcurement system. However, additional, essential
information describing the setup and design of your system resides in companion
documentation. The companion documentation consists of important topics that apply to
many or all PeopleSoft applications across the Financials, Enterprise Service Automation, and
Supply Chain Management product lines. You should be familiar with the contents of these
PeopleBooks.
The following companion PeopleBooks contain information that applies specifically to
PeopleSoft eProcurement.
•
PeopleSoft Application Fundamentals for FIN, ESA, and SCM PeopleBook
•
PeopleSoft Setting Up Global Options and Reports
•
PeopleSoft Setting Up and Using Commitment Control
•
PeopleSoft Managing Procurement
•
PeopleSoft Managing Items
•
PeopleSoft Working With Third-Party Applications
Common Elements Used in This PeopleBook
This PeopleBook documents only page elements that require additional explanation. If a page
element is not documented with the process or task in which it is used, then it either requires
no additional explanation or is documented with the common elements for the section,
chapter, or PeopleBook.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PREFACE
xv
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
The following page elements are common to this PeopleBook.
Amount
Displays the total item price and the transaction currency
from the requisition.
Account
Change this value only to change the standard accounting
structure.
Business Unit
An identification code that represents a high-level
organization of business information. You can use a
business unit to define regional or departmental units
within a larger organization.
Description
Free-flow text up to 30 characters.
Due Date
The date the items are scheduled to arrive at the Ship To
location.
Effective Date
Date on which a table row becomes effective; the date that
an action begins. For example, if you want to close out a
ledger on June 30, the effective date for the ledger closing
would be July 1. This date also determines when you can
view and change the information. Pages or panels and
batch processes that use the information use the current
row.
GL Unit (general ledger unit)
Displays the PeopleSoft General Ledger business unit that
is defined on the Purchasing Definition - Business Unit
Definition page.
Item Description
The item description as defined on the Purchasing
Attributes page.
Language or Language
Code
The language in which you want the field labels and report
headings of your reports to print. The field values appear
as you enter them.
Language also refers to the language spoken by an
employee, applicant, or non-employee.
PREFACE
Percent
Enter a percentage of the quantity or the amount to
distribute. The system updates either the Amount or
Quantity field value, depending on your selection in the
Distribute by field.
Price
Displays the vendor’s unit price and currency for the item,
which are assigned on the Vendor's UOM & Pricing Info
(vendor’s unit of measure and pricing information) page.
Product
Identifies a product. If you use PeopleSoft Projects, a
Project ID link replaces this field.
Project ID
Click to access the Projects Information page, where you
can enter any information that is relevant to the project.
This field appears only if you are using PeopleSoft
Projects.
xvi
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
Process Frequency (group
box)
EPROCUREMENT
PEOPLEBOOK
Designates the appropriate frequency in the Process
Frequency group box:
Once executes the request the next time the batch process
runs. After the batch process runs, the process frequency
is automatically set to Don't Run.
Always executes the request every time the batch process
runs.
Don't Run ignores the request when the batch process
runs.
Process Monitor
This hyperlink takes you to the Process List page, where
you can view the status of submitted process requests.
Report ID
The report identifier.
Report Manager
This hyperlink takes you to the Report List page, where
you can view report content, check the status of a report,
and see content detail messages (which show you a
description of the report and the distribution list).
Request ID
A request identification that represents a set of selection
criteria for a report or process.
Run
This button takes you to the Process Scheduler request
page, where you can specify the location where a process
or job runs and the process output format.
SetID
An identification code that represents a set of control table
information or TableSets. A TableSet is a group of tables
(records) necessary to define your organizational structure
and processing options.
Ship To
The location code that indicates the location where the
vendor should deliver the items.
Short Description
Free-flow text up to 15 characters.
Status
Your options in this field are Active or Inactive. By
linking status and effective date, you can retain historical
information and plan future implementation. For auditing
purposes, PeopleSoft encourages inactivating data that is
no longer in use instead of deleting it.
User ID
The system identifier for the individual who generates a
transaction.
See Also
PeopleSoft PeopleTools PeopleBook: Data Management, “Configuration Management,”
Process Scheduler
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PREFACE
xvii
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Delivered ChartFields
PeopleSoft delivers the following ChartFields:
PREFACE
Grid
Order
Label
Long
Name
Label
Short
Name
ChartField
Name
Field
Length
Active and
Inactive
1
Account
Account
ACCOUNT
10
Active
Classifies the nature of
a transaction. This
field is required. Use
it for corporate
accounts.
2
Alternate
Account
Alt Acct
ALTACCT
10
Active
Classifies the nature of
a transaction for
regulatory authorities.
Use it for statutory
accounting.
3
Operating
Unit
Oper
Unit
OPERATIN
G_UNIT
8
Active
Can be used to
indicate a location,
such as a distribution
warehouse or a sales
center.
4
Fund Code
Fund
FUND_COD
E
5
Active
The primary structural
units of Education and
Government
accounting.
5
Department
Dept
DEPTID
10
Active
Tracks information
according to a
divisional breakdown
of your organization.
Can be used to
indicate who is
responsible for or
affected by a
transaction.
6
Program
Code
Program
PROGRAM_
CODE
5
Active
Tracks revenue and
expenditures for
programs within or
across your
organizations. Can be
used to identify groups
of related activities,
cost centers, revenue
centers, responsibility
centers, and academic
programs.
xviii
Definition
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Grid
Order
Label
Long
Name
Label
Short
Name
ChartField
Name
Field
Length
Active and
Inactive
7
Class Field
Class
CLASS_FLD
5
Active
When combined with
a Fund, Organization,
Program Code, and
Budget Reference, it
identifies the activity
for an appropriation.
8
Budget
Reference
Bud Ref
BUDGET_R
EF
8
Active
Use to identify unique
budgets when
individual budgets
share budget keys and
overlapping budget
periods.
9
Product
Product
PRODUCT
6
Active
Captures additional
information useful for
profitability and cash
flow analysis by
product sold or
manufactured.
10
Project
ID/Grant
Project
PROJECT_I
D
15
Active
• Captures additional
information useful
for grant and
project accounting.
Definition
• The Project
ChartField does not
have effective
dating.
99
ChartField
3
CHARTFIEL
D3
10
Inactive
Generic expansion
ChartField is delivered
Inactive. It can be
configured for use,
hidden, or deleted.
99
ChartField
2
CHARTFIEL
D2
10
Inactive
Generic expansion
ChartField is delivered
Inactive. It can be
configured for use,
hidden, or deleted
99
ChartField
1
CHARTFIEL
D1
10
Inactive
Generic expansion
ChartField is delivered
Inactive. It can be
configured for use,
hidden, or deleted
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PREFACE
xix
PEOPLESOFT 8.4
PREFACE
EPROCUREMENT
PEOPLEBOOK
Grid
Order
Label
Long
Name
Label
Short
Name
ChartField
Name
Field
Length
Active and
Inactive
11
Affiliate
Affiliate
AFFILIATE
5
Active
Used to map
transactions between
business units when
using a single interunit
account.
12
Fund
Affiliate
Fund
Affil
AFFILIATE_
INTRA1
10
Active
Use to correlate
transactions between
funds when using a
single intraunit
account.
13
Operating
Unit
Affiliate
Oper
Unit
Affil
AFFILIATE_
INTRA2
10
Inactive
Use to correlate
transactions between
operating units when
using a single intraunit
account.
Statistics
Code
Statistics
Code
STATISTICS
_CODE
3
Active
Identifies nonmonetary statistical
amounts. Statistic
codes are associated
with a specific unit of
measure.
Scenario
Scenario
BD_SCENA
RIO
10
Active
Identifies different
budget iterations that
use different
assumptions.
Currency
Code
Currency
Code
CURRENCY
_CD
3
Active
Identifies currencies;
for example, FRF for
French francs.
Book Code
Book
Code
BOOK_COD
E
4
Active
Identifies subsets of
ledger rows to
segregate and
maintain in the same
ledger various
accounting, recording
and reporting
requirements for
transactions in
different accounting
environments.
Adjustment
Type
Adjustm
ent
GL_ADJUST
_TYPE
4
Active
Use to define
adjustment types
associated with
varying accounting
treatments of prior
period adjustments.
xx
Definition
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
Grid
Order
Label
Long
Name
Label
Short
Name
ChartField
Name
Field
Length
PC
Business
Unit
Activity
Active and
Inactive
EPROCUREMENT
PEOPLEBOOK
Definition
Active
Activity
PROJ_ACT_
DESCR
Active
Resource
Type
Active
Resource
Analysis
Type
Active
Resource
Category
Active
Resource
SubCategor
y
Active
Create activities, and
indicate the projects to
which they are
attached.
See Also
PeopleSoft Application Fundamentals for FIN, ESA, SCM, “Defining and Using
ChartFields”
Pages With Deferred Processing
Several pages in PeopleSoft eProcurement operate in deferred processing mode. Most fields
on these pages are not updated or validated until you save the page or refresh it by clicking a
button, link, or tab. This delayed processing has various implications for the field values on
the page—for example, if a field contains a default value, any value you enter before the
system updates the page overrides the default. Another implication is that the system updates
quantity balances or totals only when you save or otherwise refresh the page.
See Also
PeopleSoft PeopleTools PeopleBook: Application Designer, “Guidelines for Designing
Pages”
About This PeopleBook
This book provides you with the information that you need for implementing and using a
Financials and Supply Chain Management 8.4 application.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PREFACE
xxi
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
This section contains information that you should know before you begin working with
PeopleSoft products and documentation, including PeopleSoft-specific documentation
conventions, information specific to each PeopleSoft product line, and information on
ordering additional copies of our documentation.
Before You Begin
To benefit fully from the information covered in this book, you should have a basic
understanding of how to use PeopleSoft applications. We recommend that you complete at
least one PeopleSoft introductory training course.
You should be familiar with navigating the system and adding, updating, and deleting
information by using PeopleSoft windows, menus, and pages. You should also be
comfortable using the World Wide Web and the MicrosoftВ® Windows or Windows NT
graphical user interface.
Because we assume that you already know how to navigate the PeopleSoft system, much of
the information in these books is not procedural. That is, these books do not typically provide
step-by-step instructions on using tables, pages, and menus. Instead, we provide you with the
information that you need to use the system most effectively and to implement your
PeopleSoft application according to your organizational or departmental needs. PeopleBooks
expand on the material covered in PeopleSoft training classes.
PeopleSoft Application Fundamentals
Each PeopleSoft application PeopleBook provides implementation and processing information
for your PeopleSoft database. However, there is additional, essential information describing
the setup and design of your database contained in a companion volume of documentation
called PeopleSoft Application Fundamentals.
PeopleSoft Application Fundamentals contains important topics that apply to many or all
PeopleSoft applications across each product line. Whether you are implementing only one
PeopleSoft application, some combination of products within a product line, or an entire
PeopleSoft system, you should be familiar with the contents of this central PeopleBook. It
contains fundamental information such as setting up control tables and administering security.
The PeopleSoft Applications Fundamentals PeopleBook contains common information
pertinent to all applications in each product line, such as defining general options. If you're
upgrading from a previous PeopleSoft release, you may notice that we've removed some
topics or topic headings from the individual application PeopleBooks and consolidated them
in this single reference book. You’ll now find only application-specific information in your
individual application PeopleBooks. This makes the documentation as a whole less
redundant. Throughout each PeopleBook, we provide cross-references to PeopleSoft
Application Fundamentals and other PeopleBooks.
PREFACE
xxii
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Related Documentation
You can order printed, bound versions of the complete PeopleSoft documentation delivered on
your PeopleBooks CD-ROM and additional copies of the PeopleBooks CDs through the
Documentation section of the PeopleSoft Customer Connection website:
http://www.peoplesoft.com/corp/en/login.asp.
You can find updates and additional documentation for this release, as well as previous
releases, on PeopleSoft Customer Connection (http://www.peoplesoft.com/corp/en/login.asp).
Through the Documentation section of Customer Connection, you can download files to add
to your PeopleBook library. You'll find a variety of useful and timely materials, including
updates to the full PeopleSoft documentation delivered on your PeopleBooks CD.
Important! Before you upgrade, it is imperative that you check PeopleSoft Customer
Connection for updates to the upgrade instructions. We continually post updates as we refine
the upgrade process.
Hard-copy Documentation
To order printed, bound volumes of the complete PeopleSoft documentation delivered on your
PeopleBooks CD-ROM, visit the PeopleSoft Press website from the Documentation section of
PeopleSoft Customer Connection. The PeopleSoft Press website is a joint venture between
PeopleSoft and Consolidated Publications Incorporated (CPI), our book print vendor.
We make printed documentation available for each major release shortly after the software is
shipped. Customers and partners can order printed PeopleSoft documentation by using any of
the following methods:
From the main PeopleSoft Internet site, go to the
Documentation section of Customer Connection. You can
find order information under the Ordering PeopleBooks
topic. Use a Customer Connection ID, credit card, or
purchase order to place your order.
Internet
PeopleSoft Internet site: http://www.peoplesoft.com/.
Telephone
Contact Consolidated Publishing Incorporated (CPI) at
800 888 3559.
Email
Send email to CPI at [email protected]
PeopleBooks Standard Field Definitions
Throughout our product documentation, you will encounter fields and buttons that are used on
many application pages or panels. This section lists the most common fields and buttons and
provides standard definitions.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PREFACE
xxiii
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Field
Definition
As of Date
The last date for which a report or process includes data.
Business Unit
An identification code that represents a high-level organization
of business information. You can use a business unit to define
regional or departmental units within a larger organization.
Description
Freeflow text up to 30 characters.
Effective Date
Date on which a table row becomes effective; the date that an
action begins. For example, if you want to close out a ledger on
June 30, the effective date for the ledger closing would be July
1. This date also determines when you can view and change the
information. Pages or panels and batch processes that use the
information use the current row.
See Understanding Effective Dates in Using PeopleSoft
Applications.
EmplID (employee ID)
Unique identification code for an individual associated with
your organization.
Language or Language Code
The language in which you want the field labels and report
headings of your reports to print. The field values appear as you
enter them.
Language also refers to the language spoken by an employee,
applicant, or non-employee.
Process Frequency group box
Designates the appropriate frequency in the Process Frequency
group box:
Once executes the request the next time the batch process runs.
After the batch process runs, the process frequency is
automatically set to Don't Run.
Always executes the request every time the batch process runs.
Don't Run ignores the request when the batch process runs.
Report ID
The report identifier.
Report Manager
This button takes you to the Report List page, where you can
view report content, check the status of a report, and see content
detail messages (which show you a description of the report and
the distribution list).
Process Monitor
This button takes you to the Process List page, where you can
view the status of submitted process requests.
Run
This button takes you to the Process Scheduler request page,
where you can specify the location where a process or job runs
and the process output format.
See Process Scheduler Basics in the PeopleTools
documentatoin.
Request ID
PREFACE
xxiv
A request identification that represents a set of selection criteria
for a report or process.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
Field
Definition
User ID
The system identifier for the individual who generates a
transaction.
SetID
An identification code that represents a set of control table
information or TableSets. A TableSet is a group of tables
(records) necessary to define your company’s structure and
processing options.
Short Description
Freeflow text up to 15 characters.
PEOPLEBOOK
Typographical Conventions and Visual Cues
We use a number of standard conventions and visual cues in our online documentation.
The following list contains our typographical conventions and visual cues:
(monospace font)
Indicates a PeopleCode program or other program
example.
Bold
Indicates field names and other page elements, such as
buttons and group box labels, when these elements are
documented below the page on which they appear. When
we refer to these elements elsewhere in the
documentation, we set them in Normal style (not in bold).
We also use boldface when we refer to navigational paths,
menu names, or process actions (such as Save and Run).
Italics
Indicates a PeopleSoft or other book-length publication.
We also use italics for emphasis and to indicate specific
field values. When we cite a field value under the page on
which it appears, we use this style: field value.
We also use italics when we refer to words as words or
letters as letters, as in the following: Enter the number 0,
not the letter O.
KEY+KEY
PEOPLESOFT PROPRIETARY
Indicates a key combination action. For example, a plus
sign (+) between keys means that you must hold down the
first key while you press the second key. For ALT+W,
hold down the ALT key while you press W.
AND
CONFIDENTIAL
PREFACE
xxv
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
PeopleBooks provide cross-references under the heading
“See Also.” References below this heading point to other
documentation that is pertinent to the immediately
preceding documentation. Capitalized titles in italics
indicate the title of a PeopleBook; titles in quotes indicate
the title of a chapter; titles in normal font refer to sections
within the PeopleBook. Here's an example:
See Also
See Also
PeopleSoft 8.4 Enterprise Portal PeopleBook, “Handling
Portal Administration Data,” Maintaining Viewer Roles
Note. Text in this bar indicates information that you should pay particular attention to as you
work with your PeopleSoft system. If the note is preceded by Important!, the note is crucial
and includes information that concerns what you need to do for the system to function
properly.
Warning! Text within this bar indicates a crucial configuration consideration. Pay very
close attention to these warning messages.
Pages Used to <process name>
In the documentation, each page or panel description in the application includes an
introductory table with pertinent information about the page. Not all of the information will be
available for all pages or panels.
Page Name
Object Name
Navigation
Usage
Name of Page
The system name of
the panel or process as
specified in the
PeopleTools
Application Designer.
For example, the
Object Name of the
Detail Calendar panel
is
DETAIL_CALENDA
R1.
The path for accessing
the page or process.
Describes how you
would use the page or
process.
Open Source Disclosure
This product includes software developed by the Apache Software Foundation
(http://www.apache.org/). Copyright (c) 1999-2000 The Apache Software Foundation. All
PREFACE
xxvi
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
rights reserved. THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE APACHE SOFTWARE
FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
PeopleSoft takes no responsibility for its use or distribution of any open source or shareware
software or documentation and disclaims any and all liability or damages resulting from use of
said software or documentation
Comments and Suggestions
Your comments are important to us. We encourage you to tell us what you like, or what you
would like to see changed about our documentation, PeopleBooks, and other PeopleSoft
reference and training materials. Please send your suggestions to:
PeopleSoft Product Documentation Manager
PeopleSoft, Inc.
4460 Hacienda Drive
Pleasanton, CA 94588
Or send comments by email to the authors of the PeopleSoft documentation at:
[email protected]
While we cannot guarantee to answer every email message, we will pay careful attention to
your comments and suggestions. We are always improving our product communications for
you.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PREFACE
xxvii
CHAPTER 1
Getting Started With PeopleSoft
eProcurement
This chapter provides an overview of PeopleSoft eProcurement business processes and
discusses:
•
PeopleSoft eProcurement business processes.
•
PeopleSoft eProcurement integrations.
•
PeopleSoft Purchasing implementation tasks.
PeopleSoft eProcurement Business Processes
PeopleSoft eProcurement business processes include:
•
Requisition creation.
•
Purchase order creation.
•
Procurement cards.
•
Requisition change requests.
•
Purchase order change orders.
•
Receiving.
•
Returns to vendors.
•
Purchase order dispatch.
•
Procurement analysis.
We discuss these business processes in the business process chapters in this PeopleBook.
PeopleSoft eProcurement Integrations
PeopleSoft eProcurement integrates with the following PeopleSoft applications:
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GETTING STARTED WITH PEOPLESOFT
EPROCUREMENT
1-1
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
PeopleSoft
GateWay
MarketPlace
PeopleSoft eProcurement
PeoplSoft
Services
Procurement
PeopleSoft
Cohera Catalog
System
PeopleSoft
HRMS
PeopleSoft eProcurement integration flow with other PeopleSoft applications
As a standalone product, PeopleSoft eProcurement facilitates the process of procuring and
managing resources. As an integrated solution, it enhances the existing PeopleSoft Services
Procurement, Cohera System, and PeopleSoft HRMS functionality.
We cover integration considerations in the implementation chapters in this PeopleBook.
Supplemental information about third-party application integrations is located on the
PeopleSoft Customer Connection website.
Implementing PeopleSoft eProcurement
The Peoplesoft eProcurement implementation can be divided into three phases: global, core,
and additional. You set up tables to enable your system to support Peoplesoft eProcurement
features. In the planning phase of your implementation, take advantage of all Peoplesoft
sources of information. In particular, you should decide which business processes (procure,
manage, or both) will be implemented.
This section includes road maps that guide you through each of the phases:
•
Setting up global application tables.
•
Setting up core Peoplesoft eProcurement tables.
•
Setting up additional Peoplesoft eProcurement tables.
Setting Up PeopleSoft Global Application Tables
Follow these steps to define information in your PeopleSoft global application tables. The
information that you define in your global tables lays the foundation for your PeopleSoft
eProcurement-specific setup.
1-2
GETTING STARTED WITH PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
Step
EPROCUREMENT
PEOPLEBOOK
Reference
1.
Define high-level installation options.
PeopleSoft Application Fundamentals for FIN,
ESA, and SCM PeopleBook, “Setting Installation
Options for PeopleSoft Applications”
2.
Define setIDs.
PeopleSoft PeopleTools PeopleBook: Data
Management, “PeopleTools Utilities,”
Administration Utilities, TableSet IDs
3.
Define your PeopleSoft General Ledger
business unit.
PeopleSoft General Ledger PeopleBook,
“Defining Your Operational Structure,” Defining
General Ledger Business Units
4.
Define global user preferences.
PeopleSoft Application Fundamentals for FIN,
ESA, and SCM PeopleBook, “Defining User
Preferences”
5.
Define geographical locations.
PeopleSoft Application Fundamentals for FIN,
ESA, and SCM PeopleBook, “Defining Financials
and Supply Chain Management Common
Definitions,” Setting Up Locations
6.
Define currency codes.
PeopleSoft Global Options and Reports
PeopleBook, “Processing Multiple Currencies,”
Understanding Foreign Currency Processing,
Maintaining Currency Tables
7.
Define units of measure.
• PeopleSoft Managing Items PeopleBook,
“Defining Items,” Associating an Item With a
Unit of Measure, Assigning a Unit of Measure
to an Item
• PeopleSoft Managing Items PeopleBook,
“Working with Items,” Using Item Quantity
Unit of Measure, Using Units of Measure
8.
Define commodity codes.
PeopleSoft Application Fundamentals for FIN,
ESA, and SCM PeopleBook, “Defining Financials
and Supply Chain Management Common
Definitions,” Defining Additional Common
Information
9.
Define sales and use tax options.
• PeopleSoft Customers and Orders PeopleBook,
“Calculating Sales and Use Tax”
•
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PeopleSoft Application Fundamentals for
FIN, ESA, and SCM PeopleBook, “Defining
Financials and Supply Chain Management
Common Definitions,” Defining Additional
Common Information, Defining Ultimate Use
Codes
GETTING STARTED WITH PEOPLESOFT
EPROCUREMENT
1-3
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Step
10.
Reference
Define shipping requirements
• PeopleSoft Application Fundamentals for FIN,
ESA, and SCM PeopleBook, “Defining
Financials and Supply Chain Management
Common Definitions,” Setting Up Freight
Carriers
• PeopleSoft Application Fundamentals for
Financials and Supply Chain Management
PeopleBook, “Defining Financials and Supply
Chain Management Common Definitions,”
Establishing Distribution Networks
• PeopleSoft Application Fundamentals for FIN,
ESA, and SCM PeopleBook, “Defining
Financials and Supply Chain Management
Common Definitions,” Defining Freight Terms
• PeopleSoft Inventory PeopleBook, “Using
Routes and Loads in Fulfillment Processing,”
Setting Up Routes
• PeopleSoft Application Fundamentals for FIN,
ESA, and SCM PeopleBook, “Defining
Financials and Supply Chain Management
Common Definitions,” Defining Shipping
Codes
11.
Define file locations.
PeopleSoft Setting Up Procurement Options
PeopleBook, “Defining Procurement Options,”
Preparing to Dispatch by Fax or Email, Defining
File Locations
12.
Define ChartFields.
PeopleSoft Application Fundamentals for FIN,
ESA, and SCM PeopleBook, “Defining and Using
ChartFields
PeopleSoft Application Fundamentals for
Financials and Supply Chain Management
PeopleBook, “Defining and Using ChartFields,”
Defining and Using Account Types and
Attributes
13.
(Optional) Define ChartField
combinations.
Perform this step if you want to use ChartField
combinations in your business processes.
PeopleSoft Application Fundamentals for
Financials and Supply Chain Management
PeopleBook, “Editing ChartField Combinations,”
Setting Up Combination Editing
Setting Up Core PeopleSoft eProcurement Tables
The steps discussed in this section provide the order in which you define information in your
core PeopleSoft eProcurement tables.
Setting up these core tables support these business processes:
1-4
GETTING STARTED WITH PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
•
Online requisitions.
•
Dispatching PO’s.
•
Change requests.
•
Change orders.
•
Receiving.
•
Return to vendor.
EPROCUREMENT
PEOPLEBOOK
Generally, organizations implement these business processes first. We discuss these business
processes in the business process chapters of this PeopleBook.
Step
Reference
1.
Define PeopleSoft eProcurement
installation options.
PeopleSoft Application Fundamentals for FIN,
ESA, and SCM PeopleBook, “Setting Installation
Options for PeopleSoft Applications”
2.
Define PeopleSoft Purchasing business
units and options.
•
PeopleSoft Purchasing PeopleBook, “Defining
PeopleSoft Purchasing Business Units and
Processing Options”
• PeopleSoft Setting Up Procurement Options
PeopleBook, “Defining Procurement Options”
3.
Define general PeopleSoft Purchasing
options.
• PeopleSoft Setting Up Procurement Options
PeopleBook, “Defining Procurement Options,”
Preparing to Dispatch by Fax or Email, Setting
up Fax Locations
• PeopleSoft Setting Up Procurement Options
PeopleBook, “Defining Procurement Options,”
Preparing to Dispatch by Fax or Email
• PeopleSoft Setting Up Procurement Options
PeopleBook, “Defining Procurement Options”
• PeopleSoft Setting Up Procurement Options
PeopleBook, “Defining Procurement Options,”
Setting Up Standard Comments
4.
Define payment options.
PeopleSoft Setting Up Procurement Options
PeopleBook, “Defining Procurement Options,”
Defining Payment Terms
5.
Define standard comments and
comment types.
PeopleSoft Setting Up Procurement Options
PeopleBook, “Defining Procurement Options,”
Setting Up Standard Comments
6.
PeopleSoft Setting Up Procurement Options
PeopleBook, “Defining Procurement Options,”
Defining Ship To Locations
Define ship to locations.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GETTING STARTED WITH PEOPLESOFT
EPROCUREMENT
1-5
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Step
7.
Reference
Define additional procurement options.
• PeopleSoft Payables PeopleBook, “Structuring
Procurement Options for PeopleSoft Payables,”
Establishing Matching Options
• PeopleSoft Payables PeopleBook, “Structuring
Procurement Options for PeopleSoft Payables,”
Specifying Voucher Amount Tolerances
• PeopleSoft eProcurement PeopleBook, “Using
PeopleSoft eProcurement Administration,”
Maintaining Procurement Options, Setting
Up Instructions for the Return to Vendor Page
• PeopleSoft eProcurement PeopleBook,
“Receiving Stock and Returning Items to the
Vendor,” Overview of Receiving Stock
• PeopleSoft eProcurement PeopleBook, “Using
Change Requests and Change Orders”
8.
Define permission list.
PeopleSoft PeopleTools PeopleBook: Security,
Working With Permission Lists”
9.
Define requester user preferences.
PeopleSoft Application Fundamentals for FIN,
ESA, and SCM PeopleBook, “Defining User
Preferences”
10.
Define eProcurement role actions.
PeopleSoft eProcurement PeopleBook, “Using
eProcurement Administration,” Maintaining
System Users and Roles
11.
Define suppliers.
PeopleSoft Setting Up Procurement Options
PeopleBook, “Maintaining Vendor Information”
12.
• PeopleSoft Purchasing PeopleBook, “Defining
Purchasing Item Information,” Defining
Purchasing Item Categories
Define items.
• PeopleSoft Managing Items PeopleBook,
“Defining Items”
Setting Up Additional PeopleSoft eProcurement Tables
Follow these steps to define information in additional PeopleSoft eProcurement tables.
Setting up these additional tables prepares your system to support these business processes:
1-6
•
Workflow.
•
Global Trading Web MarketPlaces.
•
Procurement cards.
•
Buyer station.
GETTING STARTED WITH PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
These additional tables support business processes that your organization may choose to
implement later in your implementation cycle. We discuss these business processes in the
business process chapters of this PeopleBook.
Step
Reference
1.
Define FTP server location.
PeopleSoft eProcurement PeopleBook, "Using
PeopleSoft eProcurement Administration,"
Setting Up Installation Options and Enabling
Attachments, Defining File Server Location
URLs
3.
Define procurement cards.
PeopleSoft eProcurement PeopleBook, "Using
Procurement Cards in PeopleSoft eProcurement,”
Setting Up Procurement Cards
4.
Define workflow options.
PeopleSoft eProcurement PeopleBook, “Using
Workflow Processes in PeopleSoft
eProcurement”
5.
Define the Buyer Station
PeopleSoft eProcurement PeopleBook, “Using the
Buyer Station
6.
Define Integration to MarketPlace
PeopleSoft eProcurement PeopleBook, “Using
MarketPlace With PeopleSoft eProcurement,”
Integrating MarketPlace with PeopleSoft
eProcurement
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GETTING STARTED WITH PEOPLESOFT
EPROCUREMENT
1-7
CHAPTER 2
Using PeopleSoft eProcurement
Administration
This chapter provides an overview of eProcurement administration and discusses how to:
•
Access the administration and maintenance pages.
•
Use the setup guides.
•
Configure administration and user pages.
•
Set up installation options and enable attachments.
•
Maintain system users and roles.
•
Maintain business units.
•
Maintain codes.
•
Maintain procurement options.
•
Maintain vendors.
Understanding eProcurement Administration
PeopleSoft eProcurement administration begins with the Administer Procurement Main page.
For more information, see the Procurement Setup Guide pages.
See Also
“Getting Started with PeopleSoft eProcurement”
Configuring Administration and User Pages
Using Setup Guides
Common Elements Used in This Chapter
Msg Set (message set)
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
The message catalog that comes with PeopleSoft
eProcurement.
USING PEOPLESOFT
EPROCUREMENT
ADMINISTRATION
2-1
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Msg # (message number)
The message that contains the title and description for
each step. You can change the message numbers to use
your messages, if you write your own.
Accessing the Administration and Maintenance Pages
The Administer Procurement Main page includes a description search feature and is divided
into two main sections:
•
System AdministrationпЈ§Contains links to technical setup pages for your overall
PeopleSoft implementation.
Many of these links are to the PeopleSoft general installation, PeopleTools, PeopleSoft
Workflow pages, and to PeopleSoft eProcurement-specific implementation pages.
•
Maintain ProcurementпЈ§Contains links to functional pages for setting up
procurement.
Many of these links are to PeopleSoft general options and PeopleSoft Purchasing tables.
This section discusses how to access the administration and maintenance pages for PeopleSoft
eProcurement.
Page Used to Access the Administration and Maintenance Pages
Page Name
Object Name
Navigation
Usage
Administer
Procurement Main
PV_ADM_MAIN
eProcurement,
Procurement
Application
Administration
Link to system
administration and
procurement
maintenance options.
Accessing the Administration and Maintenance Pages
Access the Administer Procurement Main page.
2-2
USING PEOPLESOFT
EPROCUREMENT
ADMINISTRATION
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Administer Procurement Main page (1 of 2)
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING PEOPLESOFT
EPROCUREMENT
ADMINISTRATION
2-3
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Administer Procurement Main page (2 of 2)
See Also
“Using Workflow Processes in PeopleSoft eProcurement”
”Using MarketPlace with PeopleSoft eProcurement”
“Direct Connect Integration”
Using the Setup Guides
Setup guides provide sequential steps that enable users to implement PeopleSoft eProcurement
and link to the pages that define organizational structure and workflow in PeopleSoft
applications.
PeopleSoft eProcurement delivers two setup guides:
2-4
•
Procurement Setup Guide - Describes the overall implementation of PeopleSoft
eProcurement.
•
Workflow Setup Guide - Describes requisition amount approval, requisition
commodity approval, receipt notification workflow, wireless requisition approval, and
change request workflow setup.
USING PEOPLESOFT
EPROCUREMENT
ADMINISTRATION
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Note. Before implementing PeopleSoft eProcurement, it is important to
understand the PeopleSoft TableSet structure.
See Also
PeopleSoft Purchasing PeopleBook, “Getting Started With PeopleSoft Purchasing”
“Getting Started with PeopleSoft eProcurement”
“Using Workflow Processes in PeopleSoft eProcurement”
Pages Used to Use the Setup Guides
Page Name
Object Name
Navigation
Usage
Maintain Procurement
Setup Guide ID
PV_ADM_PROJECT
eProcurement,
Procurement
Application
Administration
Establish setup guide
codes to separate
departmental
implementation
checklists in the
PeopleSoft
Procurement and
Workflow setup
guides.
Click the Maintain
Overall System
Options link.
Click the Setup Guide
link to access the
Maintain Procurement
Setup Guide ID page.
Procurement Setup
Guide - Default
PV_ADM_SETUP_G
UIDE
eProcurement,
Procurement
Application
Administration
Click the Procurement
Setup Guide link to
access the Procurement
Setup Guide Default
page.
Workflow Setup Guide
- Default
PV_ADM_WRKFLW
_GDE
eProcurement,
Procurement
Application
Administration
Click the Maintain
Workflow link.
Follow a procedural list
of pages that you may
need to set up
PeopleSoft
eProcurement.
Set up requisition
amount approval,
requisition commodity
approval, receipt
notification workflow,
and change request
workflow.
Click the Workflow
Setup Guide link to
access the Workflow
Setup Guide Default
page.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING PEOPLESOFT
EPROCUREMENT
ADMINISTRATION
2-5
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Accessing the Procurement Setup Guide - Default Page
Access the Procurement Setup Guide - Default page.
See Also
Using Setup Guides
PeopleSoft Purchasing PeopleBook, “Getting Started With PeopleSoft Purchasing”
Configuring Administration and User Pages
Configuring Administration Pages
Reorder the available options (items), display different page links, or use different titles or
descriptions when:
•
You add tables to store the data display in PeopleSoft eProcurement Administration.
•
You want to rename links or change descriptions.
•
You want to reorder or remove some administration steps to reflect your own
approach to implementation.
Configuring User Pages
When users first enter PeopleSoft eProcurement, they start with the eProcurement Homepage
and, if they are buyers, the Buyer Station page. You can configure the link order, descriptions,
and images that appear on these pages.
This section discusses how to:
•
Configure the Maintain the Administration page.
•
Define second-level links for the Administer Procurement Main page.
•
Configure the eProcurement Homepage and the Buyer Station page.
Pages Used to Configure Administration and User Pages
Page Name
Object Name
Navigation
Usage
Maintain Overall
System Options
PV_ADM_ADMIN
eProcurement,
Procurement
Application
Administration
Access the pages that
are used to set overall
system options.
Click the Maintain
Overall System
Options link.
2-6
USING PEOPLESOFT
EPROCUREMENT
ADMINISTRATION
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
Maintain the
Administration
PV_ADM_PAGE_TB
L
eProcurement,
Procurement
Application
Administration
Configure the
Administer
Procurement Main
page, change titles,
change descriptions,
and reorder steps.
Click the Maintain
Overall System
Options link.
Click the Maintain the
Administration Page
link to access the
Maintain the
Administration Page
Administer
Procurement Menu
Items Table
PV_ADM_ITEM_TBL
Define the second level
of links (or steps) for
the PeopleSoft
eProcurement
administration section.
eProcurement,
Procurement
Application
Administration
Click the Maintain
Overall System
Options link.
Click the Maintain
Administration Menu
Items link to access the
Administer
Procurement Menu
Items Table page.
eProcurement Main
Page Administration
PV_MP_ADMIN
eProcurement,
Procurement
Application
Administration
Click the Maintain
Overall System
Options link.
Click the Maintain
Main Page link to
access the
eProcurement Main
Page Administration
page.
Access is limited to
users with the
System_Admin action
role.
Access is limited to
users with the
System_Admin action
role.
Configure the
eProcurement
Homepage or the
Buyer Station page.
Define the items, the
order in which they
appear, the description,
and the images that are
used.
Configuring the Maintain the Administration Page
Access the Maintain the Administration page.
On this page, use the Admin Group (administration group) values of System and Procurement
to configure the System Administration and Maintain Procurement sections on the Administer
Procurement Main page.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING PEOPLESOFT
EPROCUREMENT
ADMINISTRATION
2-7
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Main Item
The title for each option (group of steps) on the
Administer Procurement Main page.
SeqNum (sequence number)
The order in which the steps appear on the Administer
Procurement Main page.
See Also
Understanding eProcurement Administration
Defining Second-Level Links for the Administer Procurement Main Page
Access the Administer Procurement Menu Items Table page.
After you configure the Administer Procurement Main page, you can define the links that
appear on that page.
Admin Item Code
(administration item code)
Define a section for the Administer Procurement Main
page. Values are:
ADM-01: Accounting.
ADM-02: eProcurement Processes.
ADM-04: Business Units.
ADM-05: Codes.
ADM-06: Items.
ADM-07: Merchants Integration.
ADM-08: Overall System Options.
ADM-09: Procurement Options.
ADM-10: Publishing Rules.
ADM-11: System Users and Roles.
ADM-12: Vendors.
ADM-13: Workflow.
ADM-14: Procurement Users.
Admin (Administration) Item Description Tab
2-8
Step # (step number)
Designates the order in which the steps appear on the
Procurement Setup Guide - Default page, which contains
the following sections: Business Unit, Codes, Accounting,
Procurement Options, Vendors, Items, and Procurement
Users.
Sub Item
Assigns a reference name to the steps for this
administration item code. For example, ADM-05 lists sub-
USING PEOPLESOFT
EPROCUREMENT
ADMINISTRATION
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
item 1 names, such as Units of Measure, Tax Codes, and
Location Codes.
Sub-item Group
Lists predefined groups (or subheadings) on the
established page. For example, the Maintain Business
Units page has two groups (subheadings): General Setup,
and Setup Purchasing Business Units. The sub-item
groups are SetID and BU. You can restrict a sub-item by
using the Maintain group, which removes it from the
Admin Setup Guide but not from the Maintain Business
Units page.
Menu Items
Defines the location for the step item.
Menu Navigation Setup Tab
The fields on this tab link the step to a PeopleSoft table. The bar name establishes a
connection to the step table location.
See Also
Accessing the Procurement Setup Guide - Default Page
PeopleSoft PeopleTools PeopleBook: Application Designer, “Using PeopleSoft Application
Designer”
Configuring the eProcurement Homepage and the Buyer Station Page
Access the eProcurement Main Page Administration page.
Select a Main Page
Select a value:
eProcurement: Alters the eProcurement Homepage
(PV_MAIN_PAGE).
Buyer Station: Alters the Buyer Station page
(PV_PO_MAIN).
Item Number
Specify the order in which items appear on the page. A
blank (or 0) centers the item on the page.
Item
Specify the option that appears on the page that you are
configuring. For example, eProcurement Homepage items
include Create Requisition, Manage Requisitions, My
Profile, Buyer Station, and Administration.
Bar Name
Specify the bar item that places this item on the menu in
PeopleTools. This field, with the Item Name, Starting
Page, and Cref ID (content reference ID) by URL (content
reference ID by uniform resource locator) fields, enforces
user access security.
Item Img (item image)
Specify the image that appears on the main page for this
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING PEOPLESOFT
EPROCUREMENT
ADMINISTRATION
2-9
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
item.
Item Name
Indicate the PeopleTools menu item that is used by the
item’s page. This field, in combination with the Bar
Name, Starting Page, and Cref ID by URL fields, enforces
user access security.
Starting Page
Specify the initial page that appears for this item. This
field, in combination with the Bar Name, Item Name, and
Cref ID by URL fields, enforces user access security.
Cref ID (content reference
ID) by URL
Enter the query string that links to components from the
main page. The string also determines the menu
component for the main page security. This field, with the
Bar Name, Item Name, and Starting Page fields, enforces
user access security.
See Also
PeopleSoft PeopleTools PeopleBook: Application Designer,” Using PeopleSoft Application
Designer”
PeopleSoft Portal Technology PeopleBook, “Introducing PeopleSoft Portal Technology”
Setting Up Installation Options and Enabling Attachments
This section discusses how to:
•
Define file server location URLs.
•
Set up eProcurement installation options.
Pages Used to Set Up Installation Options and Enable Attachments
Page Name
Object Name
Navigation
Usage
Maintain Overall
System Options
PV_ADM_ADMIN
eProcurement,
Procurement
Application
Administration
Access the pages that
are used to set overall
system options.
Click the Maintain
Overall System
Options link.
2-10
USING PEOPLESOFT
EPROCUREMENT
ADMINISTRATION
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
URL Maintenance
URL_TABLE
eProcurement,
Procurement
Application
Administration.
Define the URL for the
File Transfer Protocol
(FTP) server to enable
users to send
attachments with
PeopleSoft
eProcurement
transactions.
Click the Maintain
Overall System
Options link.
Click the Maintain FTP
Server Location link to
access the URL
Maintenance page.
eProcurement
Installation Options
PV_INSTALLATION
_PV
Configure PeopleSoft
eProcurement
integration with
PeopleSoft Enterprise
Resource Planning.
eProcurement,
Procurement
Application
Administration.
Click the Maintain
Overall System
Options link.
Click the Installation
Options link to access
the eProcurement
Installation Options
page.
Access is limited to
users with the
System_Admin action
role.
See Also
Configuring Administration and User Pages
Using the Setup Guides
Defining File Server Location URLs
Access the URL Maintenance page.
Create a URL identifier that is named PV for the FTP location for PeopleSoft eProcurement
attachments, and specify the FTP server address. The FTP root location must contain a
subdirectory that is named PV.
See Also
PeopleSoft PeopleTools PeopleBook: Data Management, “PeopleTools Utilities”
Setting Up eProcurement Installation Options
Access the eProcurement Installation Options page.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING PEOPLESOFT
EPROCUREMENT
ADMINISTRATION
2-11
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Receipt Notification
Select this check box to enable Receipt Notification
Workflow.
Max Search Result to
Retrieve (maximum search
result to retrieve)
Enter the maximum number of rows to retrieve on these
pages:
Search Catalog.
Advanced Search.
Manage Requisitions.
Manage Purchase Orders.
Receipts for a Power User.
Receipts for a Casual User.
Note. If a search returns more rows than you specify, an
error message appears.
sProcurement Installation
Options (PeopleSoft Services
Procurement installation
options)
Select the type of Service Procurement options you wish
to use. You can integrate PeopleSoft eProcurement with
PeopleSoft Services Procurement, use PeopleSoft Services
Procurement as a standalone application, or elect not to
use the PeopleSoft Services Procurement application.
MarketPlace Catalog Update
SetID
Identifies an Item when the Import CUP Items process
(PV_CP_LOAD) loads items from MarketPlace to the
item catalog.
Catalog ID
Identifies the PeopleSoft tree that is used when the Import
CUP Items process loads the categories.
Req. Item Catalog Search (requisition item catalog search)
Catalog Search Type
Select the type of item search to use on the Search Catalog
page. Values are:
FSE: If you select this search, run the Updating Item
Searches (PV_SRCH_UPDT) process every time you add
items to the item catalog, because a different table is
maintained for the FSE search.
VSE (Verity search engine): Offers faster searches and
advanced search options.
To limit the access of item catalogs within certain
BU Catalog Control
(business unit catalog control) business units, select Y and go to the Assign Catalog to
Business Unit page to set up the item catalogs to use in
each business unit. Select N to enable every business unit
to access all catalogs.
Auto Add Req Items to
2-12
USING PEOPLESOFT
EPROCUREMENT
Select this check box to automatically add items to your
ADMINISTRATION
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
Favorite (automatically add
requisition items to favorite)
EPROCUREMENT
PEOPLEBOOK
list of favorites each time they are added to the PeopleSoft
eProcurement system.
See Also
“Implementing Item Searches,” Implementing the Verity Search Engine
Maintaining System Users and Roles
User security control in PeopleSoft eProcurement is similar to that in other PeopleSoft
applications. You associate permission lists to roles to which user profiles (user IDs) are
attached. However, PeopleSoft eProcurement comes with several predefined role actions that
restrict or grant user access to certain actions.
This section discusses how to attach role actions to user roles.
See Also
PeopleSoft PeopleTools PeopleBook: Security, “User Profiles”
PeopleSoft PeopleTools PeopleBook: Security, “Understanding PeopleSoft Security,” Roles
PeopleSoft PeopleTools PeopleBook: Security, “Understanding PeopleSoft Security,”
Permission Lists
Pages Used to Maintain System Users and Roles
Page Name
Object Name
Navigation
Usage
Maintain System Users
and Roles
PV_ADM_ROLES_U
SERS
eProcurement,
Procurement
Application
Administration
Access the pages that
control PeopleSoft
eProcurement user
security.
Click the Maintain
System Users and
Roles link.
Access is limited to
users with the
System_Admin action
role.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING PEOPLESOFT
EPROCUREMENT
ADMINISTRATION
2-13
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
eProcurement Role
Actions
PV_ACTIONS
eProcurement,
Procurement
Application
Administration
Apply security
restrictions to specific
PeopleSoft
eProcurement actions.
Click the Maintain
System Users and
Roles link.
Click the eProcurement
Role Action link to
access the
eProcurement Role
Actions page.
Attaching Role Actions to User Roles
Access the eProcurement Role Actions page.
Action Name
Select from options to restrict or enable access to the users
that are associated with the selected role name:
ADD_MULTI_ITEMS: Users can add multiple items to a
shopping cart.
ALLOW_PURGE: Database maintenance users can erase
transactions with the Purge Staging Table and Purge
Change Order Requests options in the Buyers Station.
ALLOW_WF_INIT: Users can manually initialize
requisition approval workflow with the Manage
Requisitions page.
CHANGEREQBU: Users can change the requester and
business unit of a requisition. This action is necessary to
purchase something on behalf of another requester.
NAVIGATOR: Users can view and use the Requisition
Navigator.
NO_CASUAL_RECV: Users cannot access the PeopleSoft
eProcurement receiving pages. The default access value
grants all users access to the casual user receiving pages.
This action revokes the default access.
NO_DEFAULT_RESULT: No default search result
appears on the Manage Requisition page or the Receipts
For a Casual User page.
PRICEANDAVAILCHECK: Users can initiate a price and
available quantity check for items from MarketPlace.
REC_BY_SHIPTO: Users can receive all purchase orders
2-14
USING PEOPLESOFT
EPROCUREMENT
ADMINISTRATION
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
that are sent to their default ship to.
RECV_CASUAL_ALL: Users on casual user receiving
pages can cancel receipts, view purchase order details, and
edit receipts that are not closed or canceled.
RECV_POWER: Users are switched from the casual user
receiving pages to the PeopleSoft Purchasing receiving
pages. This action is for receiving or purchasing
department users.
REQ_MGR_OPR: Users can view the Requested By and
Requested For fields on the Manage Requisitions page.
SINGLE_CAT_BROWSE: Users can see the catalog
browse in a single frame on the left side of the screen.
Items appear in the center of the page.
SYSTEM_ADMIN: Users can access the System
Administration section of the Administer Procurement
Main page.
VIEW_ALL_VENDORS: Users can view all vendors when
browsing or searching.
Maintaining Business Units
This section discusses how to:
•
Create a PeopleSoft Purchasing business unit.
•
Associating business units, setIDs, and record groups.
•
Define PeopleSoft General Ledger business units.
See Also
“Getting Started with PeopleSoft eProcurement”
Pages Used to Maintain Business Units
Page Name
Object Name
Navigation
Usage
Maintain Business
Units
PV_ADM_SETUP_B
U
eProcurement,
Procurement
Application
Administration
Access the pages that
are used to establish
and maintain
PeopleSoft
eProcurement business
units.
Click the Maintain
Business Units link.
Some of these pages
are optional, depending
on your configuration.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING PEOPLESOFT
EPROCUREMENT
ADMINISTRATION
2-15
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
Purchasing Definition Business Unit
Definition
BUS_UNIT_TBL_PM
eProcurement,
Procurement
Application
Administration
Define a PeopleSoft
Purchasing business
unit.
Click the Maintain
Business Units link.
Click the Purchasing
Definition link to
access the Business
Unit Definition page.
Business Unit Options
BUS_UNIT_TBL_PM
2
eProcurement,
Procurement
Application
Administration
Define business unit
options.
Click the Maintain
Business Units link.
Click the Purchasing
Definition link to
access the Business
Unit Definition page.
Click the Business Unit
Options tab.
PO Approval Options
BUS_UNIT_PO_APP
R
Define purchase order
approval Options.
eProcurement,
Procurement
Application
Administration
Click the Maintain
Business Units link.
Click the Purchasing
Definition link to
access the Business
Unit Definition page.
Click the PO Approval
Options tab.
2-16
USING PEOPLESOFT
EPROCUREMENT
ADMINISTRATION
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
Page Name
Object Name
Navigation
Usage
Document Numbering
BUS_UNIT_TBL_PM
3
eProcurement,
Procurement
Application
Administration
View document
numbering.
PEOPLEBOOK
See PeopleSoft Global
Options and Reports
PeopleBook, “Defining
Document Sequencing
Click the Maintain
Business Units link.
Click the Purchasing
Definition link to
access the Business
Unit Definition page.
Click the PO
Document Numbering
tab.
Req Approval Options
BUS_UNIT_REQ_AP
PR
Define requisition
approval options.
eProcurement,
Procurement
Application
Administration
Click the Maintain
Business Units link.
Click the Purchasing
Definition link to
access the Business
Unit Definition page.
Click the Req Approval
Option tab.
Record Group
SET_CNTRL_TABLE
1
Create relationships
between setIDs,
business units, and
record groups.
eProcurement,
Procurement
Application
Administration
Click the Maintain
Business Units link.
Click the TableSet
Control link to access
the Record Group
page.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING PEOPLESOFT
EPROCUREMENT
ADMINISTRATION
2-17
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
Tree
SET_CNTRL_TABLE
2
eProcurement,
Procurement
Application
Administration
Create relationships
between setIDs,
business units, and
record groups.
Click the Maintain
Business Units link.
Click the TableSet
Control link to access
the Record Group
page.
Click the Tree tab.
General Ledger
Definition
BUS_UNIT_TBL_GL
1,
BUS_UNIT_TBL_GL
2,
BUS_UNIT_TBL_GL
3,
BUS_UNIT_TBL_GL
4,
BUS_UNIT_TBL_GL
6
Add or view a
PeopleSoft General
Ledger business unit.
eProcurement,
Procurement
Application
Administration
Click the Maintain
Business Units link.
Click the General
Ledger Definition link
to access the General
Ledger Business Unit
Definition component.
Creating a PeopleSoft Purchasing Business Unit
Access the Purchasing Definition - Business Unit Definition page.
Note. All PeopleSoft eProcurement transactions are recorded in a PeopleSoft Purchasing
business unit. Set up a PeopleSoft Purchasing business unit even if you are not using
PeopleSoft Purchasing (standalone mode).
See Also
PeopleSoft Purchasing PeopleBook, “Defining PeopleSoft Purchasing Business Units and
Processing Options,” Defining Purchasing Business Unit Options
Associating Business Units, SetIDs, and Record Groups
Access the TableSet Record Group Controls page.
Note. If you are integrating with MarketPlace, use the TableSet Controls component to link
the PeopleSoft eProcurement record group PV_01 as a MarketPlace buyer.
2-18
USING PEOPLESOFT
EPROCUREMENT
ADMINISTRATION
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
See Also
”Using MarketPlace with PeopleSoft eProcurement”
PeopleSoft Purchasing PeopleBook, “Defining PeopleSoft Purchasing Business Units and
Processing Options,” Defining Purchasing Business Unit Options
Defining PeopleSoft General Ledger Business Units
Access the General Ledger Definition page.
Note. You must set up a PeopleSoft General Ledger business unit even if you are not using
the PeopleSoft General Ledger system.
See Also
PeopleSoft Purchasing PeopleBook, “Defining PeopleSoft Purchasing Business Units and
Processing Options,” Defining Purchasing Business Unit Options
Maintaining Codes
This section discusses how to access the pages that are used to define purchasing codes.
Page Used to Define Purchasing Codes
Page Name
Object Name
Navigation
Usage
Maintain Codes
PV_ADM_SETUP_C
ODES
eProcurement,
Procurement
Application
Administration
Access pages used to
define purchasing
codes.
Click the Maintain
Codes link.
Note. If you are using Direct Connect Supplier integration, be sure that the country, currency,
and units of measure codes that you define are the same as those that appear in the merchant’s
website. PeopleSoft recommends using ISO (international standards organization) standards.
Defining Purchasing Codes
Access the pages used to define purchasing codes.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING PEOPLESOFT
EPROCUREMENT
ADMINISTRATION
2-19
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
See Also
PeopleSoft Setting Up Procurement Options PeopleBook, “Defining Procurement Options”
“Getting Started with PeopleSoft eProcurement”
“Direct Connect Integration”
Maintaining Procurement Options
This section discusses how to:
•
Assign catalogs to a purchasing business unit.
•
Set up instructions for the Return to Vendor page.
See Also
PeopleSoft Setting Up Procurement Options PeopleBook, “Defining Procurement Options”
Pages Used to Maintain Procurement Options
Page Name
Object Name
Navigation
Usage
Maintain Procurement
Options
PV_ADM_PROCURE
OPTS
eProcurement,
Procurement
Application
Administration
Access the pages used
to set up PeopleSoft
eProcurement
requisition and
purchase order options.
Click the Maintain
Procurement Options
link.
2-20
USING PEOPLESOFT
EPROCUREMENT
ADMINISTRATION
Note. Most of these
pages are in the
Structure Procurement
Options and Define
General Options
components and are
discussed in their
source PeopleBooks.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
Assign Catalogs to
Business Unit
PV_REQ_BU_CAT
eProcurement,
Procurement
Application
Administration
Limit the items that are
available to a user by
restricting the user to
an item catalog. You
can also restrict user
access to items by
attaching item catalogs
to the requester on the
Requester’s Setup page
Click the Maintain
Procurement Options
link.
Click the Assign
Catalog to BU link to
access the Assign
Catalogs to Business
Units page.
Setup Instructions for
Return to Vendor
PV_RTV_ADMIN
Configure the
instructions that appear
on the Return to
Vendor page.
eProcurement,
Procurement
Application
Administration
Click the Maintain
Procurement Options
link.
Click the Return to
Vendor Instructions
link to access the Setup
Instructions for Return
to Vendor page.
Assigning Catalogs to a Purchasing Business Unit
Access the Assign Catalogs to Business Unit page.
Business Unit
Enter a business unit to which you are assigning catalogs.
Any user who enters PeopleSoft eProcurement
requisitions using this business unit can select only the
items in the catalogs that appear in the Catalog ID field.
Catalog ID
Enter item catalogs.
Enabled
Select this check box to indicate the item catalog for the
requesters in this business unit.
Note. To enable the entries on this page, enter Y in the BU Catalog Control field on the
eProcurement Installation Options page.
See Also
PeopleSoft Setting Up Procurement Options PeopleBook, “Defining Procurement Options”
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING PEOPLESOFT
EPROCUREMENT
ADMINISTRATION
2-21
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Setting Up Instructions for the Return to Vendor Page
Access the Setup Instructions for Return to Vendor page.
Instr. Code (instruction
code)
Select how you want the instructions to appear on the
Return to Vendor page. Values are:
General Instructions (top): At the top of the page under
the first heading.
Return Qty Shipped to Vendor: Below the Shipment and
Vendor Information heading, if Return To Vendor (RTV)
has a status of Shipped.
Saved confirmation page text: When the Save button is
clicked on the Return to Vendor page.
Ship Qty instruction (bottom): Below the Shipment and
Vendor Information heading, if the RTV has a status of
Open.
See Also
“Getting Started with PeopleSoft eProcurement”
Maintaining Vendors
This section discusses how to enter the URL for a vendor’s website.
See Also
PeopleSoft Purchasing PeopleBook, “Managing Procurement Cards,” Defining Cardholder
Card Data
PeopleSoft Setting Up Procurement Options PeopleBook, “Maintaining Vendor Information,”
Entering Vendor Information
Pages Used to Maintain Vendors
Page Name
Object Name
Navigation
Usage
Maintain Vendors
PV_ADM_VNDR
eProcurement,
Procurement
Application
Administration
Access the pages used
to maintain vendors.
Click the Maintain
Vendors link.
2-22
USING PEOPLESOFT
EPROCUREMENT
ADMINISTRATION
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
Maintain Vendor
Hyperlinks
PV_VNDR_URL_MA
INT
eProcurement,
Procurement
Application
Administration
Enter URLs for a
vendor’s website.
Click the, Maintain
Vendors link.
Click the Maintain
Vendor URL link to
access the Maintain
Vendor Hyperlinks
page.
Entering the URL for a Vendor’s Website
Access the Maintain Vendor Hyperlinks page.
To enter the URL for a vendor’s website:
1. Click the Update Vendor List button to display the vendors within the designated setID.
This button disappears after the vendors appear.
2. In the Vendor Home Page field, enter the URL for the vendor.
Now you can access the vendor’s website by clicking the Vendor link on the Search Catalog
page.
See Also
PeopleSoft Setting Up Procurement Options PeopleBook, “Maintaining Vendor Information,”
Entering Vendor Information
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING PEOPLESOFT
EPROCUREMENT
ADMINISTRATION
2-23
CHAPTER 3
Using Workflow Processes in
PeopleSoft eProcurement
This chapter provides an overview of PeopleSoft Workflow and discusses how to:
•
Configure PeopleSoft Workflow.
•
Configure PeopleSoft Workflow with PeopleSoft eProcurement.
•
Configure the PeopleSoft eProcurement Workflow Builder.
•
Configure the PeopleSoft eProcurement requisition approval workflow.
Understanding PeopleSoft Workflow
Many daily tasks are part of a larger process that involves several steps and people working
together. The term workflow refers to this process, which could encompass, for example, the
approval of a requisition or a change request form. To facilitate this type of multiuser process,
PeopleSoft can automatically trigger workflow routings—notifications to inform other people
of the work awaiting them. This chapter discusses how to use the two workflow processes
delivered with PeopleSoft eProcurement.
PeopleSoft Workflow
Several of the predefined workflows in PeopleSoft eProcurement use the standard workflow
common to all PeopleSoft applications. PeopleTools Application Designer and Workflow
Administrator are used to design these workflow processes. Currently, this workflow is used
for:
•
Receipt notification.
•
RTV (return to vendor) exchange notification.
•
Procurement card requests.
•
Change requests.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING WORKFLOW PROCESSES
IN
PEOPLESOFT
EPROCUREMENT
3-1
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
PeopleSoft eProcurement Workflow
PeopleSoft eProcurement contains its own unique workflow that does not require Application
Designer, PeopleCode, or Workflow Administrator. It is easier to design and maintain than
the standard PeopleSoft workflow. Currently, this workflow is used for requisition approval.
You can also configure or add other workflow processes to automate your business processes.
See Also
PeopleSoft PeopleTools PeopleBook: Workflow, “Introduction to Workflow”
Configuring PeopleSoft Workflow
This section discusses how to:
•
Set up and use the receipt notification workflow.
•
Use the return to vendor exchange workflow.
•
Use workflow to request a procurement card.
•
Set up and use workflow for change request approvals.
Common Elements Used in This Section
3-2
Roles
Most delivered workflow users use list roles, which
identify a user’s job function but not an individual user.
You might want to replace this with query roles for more
accuracy.
Route Controls
Instead of defining query roles, you might use route
controls to tailor your workflow based on the individuals
involved.
USING WORKFLOW PROCESSES
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Pages Used to Configure PeopleSoft Workflow
Page Name
Object Name
Navigation
Usage
eProcurement
Installation Options
PV_INSTALLATION
_PV
eProcurement,
Procurement
Application
Administration
Enable the receipt
notification workflow
process.
Click the Maintain
Overall System
Options link.
Click the eProcurement
Installation Options
link to access the
eProcurement
Installation Options
page.
Purchasing Attributes Purchasing Controls
ITM_TBL_PUR2
Items, Define Items
and Attributes,
Purchasing Attributes,
Purchasing Attributes –
Purchasing Controls
page.
Select items to which
receipt notification
workflow applies by
requiring receiving.
Item Categories Category Definition 2
CATEGORY_TBL2
Items, Define Controls,
Item Categories,
Category Definition
page.
Select items to which
receipt notification
workflow applies. This
applies to items
without an item ID.
eProcurement Role
Actions
PV_ACTIONS
eProcurement,
Procurement
Application
Administration
Confirm that users who
are to receive receipt
notification are not
assigned the role action
of
NO_CASUAL_RECV
or RECV_POWER.
Click the Maintain
System Users and
Roles link.
Click the eProcurement
Role Action link to
access the
eProcurement Role
Action page.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING WORKFLOW PROCESSES
IN
PEOPLESOFT
EPROCUREMENT
3-3
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
Workflow Notification
Process
PV_RUN_VCHR_RE
Q
eProcurement,
Procurement
Application
Administration
Initiate workflow
notification of
neglected worklist
entries and vouchered
POs with no receipt.
Click the Run
eProcurement
Processes link.
Click the Workflow
Processes link.
Click the Workflow
Notification link to
access the Workflow
Notification process
page.
Select Items to Receive
PV_PO_PICK_ORDE
RSC
eProcurement,
eProcurement Home
Page.
Select items to receive
following receipt
notification.
Click the Receive link
on eProcurement
Homepage to access
the Select Items to
Receive page.
Request Procurement
Card
PV_CC_REQUEST
eProcurement,
Procurement Home
Page.
Request that a
procurement card be
issued to a user.
Click Procurement
Card link on
eProcurement
Homepage, and then
click the Procurement
Card Requests link to
access the Request
Procurement Card
page.
Cardholder Profile Card Data
CC_CARD_DATA
Purchasing,
Procurement Cards,
Cardholder Profile,
Card Data
Enter procurement card
vendor and account
information.
Setting Up and Using the Receipt Notification Workflow
PeopleSoft eProcurement is designed to enable your requesters to record the receipt of goods.
However, some requesters do not promptly record receipts. The Receipt Notification
workflow process (PV_VCHR_AET) reminds them to receive their goods. If PeopleSoft
Payables has recorded the voucher (vendor’s invoice) for the purchase order but no receipt has
been entered, the system inserts a reminder on the requester’s To Do List.
3-4
USING WORKFLOW PROCESSES
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
PeopleSoft has already built the workflow process for receipt notification in PeopleSoft
eProcurement. All you do is configure the workflow system settings and link users to
PeopleSoft Workflow. You can also configure the delivered workflow process.
Note. For the receipt notification workflow process and its routings to work properly, each
workflow participant’s User Profile page must be set up properly.
Setting Up Receipt Notification Workflow
To set up the receipt notification workflow process:
1. Select the Receipt Notifications check box on the eProcurement Installation Options
page.
2. Define the items and item categories that require receiving by selecting the Receiving
Required check box on the Purchasing Attributes - Purchasing Controls page. Define
orders without IDs by selecting the Receiving Required check box on the Items Categories
- Category Definitions 2 page.
3. Define the user’s profile for receipt notification.
Note. To use the receipt notification workflow process, your user profile must not include
a role using the eProcurement Role Actions page of NO_CASUAL_RECV or
RECV_POWER. All other PeopleSoft eProcurement users receive receipt notifications.
4. Use PeopleSoft Process Scheduler to run the Receipt Notification (PV_VCHR_AET)
background process. This Application Engine process triggers process
PV_VCHR_MATCHING to search for vouchers without receipts and notifies the
requester.
See Also
PeopleSoft PeopleTools PeopleBook: Data Management, “Configuration Management,”
Process Scheduler
PeopleSoft PeopleTools PeopleBook: Security, “User Profiles”
PeopleSoft Purchasing PeopleBook, Defining Purchasing Item Information,” Defining
Purchasing Item Categories
PeopleSoft Purchasing PeopleBook, Defining Purchasing Item Information,” Defining
Purchasing Item Attributes
“Using eProcurement Administration,” Attaching Role Actions to User Roles
Using Receipt Notification Workflow
This is the process that occurs when using Receipt Notification Workflow:
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING WORKFLOW PROCESSES
IN
PEOPLESOFT
EPROCUREMENT
3-5
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
1. The Application Engine program, PV_VCHR_AET, runs according to a predefined
schedule.
2. The program triggers the PV_VCHR_MATCHING business process.
3. The business process finds all POs that have vouchers, require receiving and three-way
matching, and have not been received (no receipts are present).
4. PeopleSoft Workflow cross-references these POs to their corresponding requisitions and
finds the requesters' IDs.
5. If requester roles are not assigned to the action NO_CASUAL_RECV, requesters receives
entries on their To Do Lists, which are located on the PeopleSoft eProcurement home
page. These entries notify the requesters about the remaining POs that need to be received.
6. When a requester clicks To Do List items, the Select Items to Receive page displays POs
to be received.
7. When a requester saves a receipt for a PO, the To Do List item is marked Worked and
removed from the list.
See Also
“Receive and Return to Vendor,” Selecting Items to Receive
Using the Return to Vendor Exchange Workflow
The Return to Vendor (RTV) Exchange workflow process (PV_RTV_EXCHANGE) delivered
with PeopleSoft eProcurement lets goods be returned to vendors and exchanged for other
items. The RTV process ensures that an exchange is completed properly by notifying the
buyer that it has been entered.
Note. No setup is needed for the PeopleSoft eProcurement RTV Exchange workflow process.
Here is what happens when using Return to Vendor Exchange Workflow to notify buyers:
1. A requester who wants to exchange an item completes an RTV and chooses Exchange.
2. When the RTV is saved, a workflow event triggers the PV_RTV_EXCHANGE business
process. (This event only gets triggered if the RTV action is Exchange.)
3. PeopleSoft Workflow retrieves the purchase order business unit, purchase order ID, and
buyer ID from the RTV.
4. PeopleSoft Workflow inserts a worklist item in the buyer’s To Do List.
5. The buyer selects the worklist entry, opening the PO.
6. The buyer can make modifications or add another PO to record the exchange.
3-6
USING WORKFLOW PROCESSES
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Using Workflow to Request a Procurement Card
Use the Request Procurement Card page to request procurement cards for PeopleSoft
eProcurement. Once you enter information and save the page, workflow routes the
procurement card to the correct authority for approval.
Note. There is no setup needed for PeopleSoft eProcurement’s procurement card request
workflow process.
Here is what happens when using PeopleSoft Workflow to approve procurement card
requests:
1. A requester who wants a procurement card fills out the Request Procurement Card page.
2. Once the page is saved, a workflow event triggers the PV_CC_REQUEST business
process.
3. PeopleSoft Workflow inserts a worklist item in the To Do List of the user assigned on the
User Profile - Roles page to the workflow role of administrator.
4. When the administrator selects the worklist entry on the To Do List, the Employee Profile
- Card Data page opens.
5. The administrator can add additional information and save (or cancel) the profile.
See Also
PeopleSoft PeopleTools PeopleBook: Security, “User Profiles”
PeopleSoft Purchasing PeopleBook, “Managing Procurement Cards,” Defining Cardholder
Card Data
“Using eProcurement Cards,” Requesting Issuance of a Procurement Card
Setting Up and Using Workflow for Change Request Approvals
PeopleSoft eProcurement enables requesters to submit changes to dispatched purchase orders
using the change request form. A buyer must approve the change request before a change
order is dispatched to the vendor. To set up the change request approval workflow:
1. Assign a supervisor for each requester by accessing the User Profile - Workflow page and
entering a value in the Supervisor User ID field.
Note. If the change request entered increases the unit price or quantity of the original
requisition, this supervisor must approve the change request. Users who are at the top of
the approval chain do not have a supervisor user ID.
2. Define buyers in your organization by accessing the User Profile - Roles page and
entering the workflow role of buyer for each.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING WORKFLOW PROCESSES
IN
PEOPLESOFT
EPROCUREMENT
3-7
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Note. It is important that all buyers be assigned the role of buyer on their User Profile
pages. This role is a user list role, not a query role.
Using Change Request Approval Workflow
This is what happens when using PeopleSoft Workflow to approve a change request:
1. A requester enters a change request in PeopleSoft eProcurement.
2. When the Change Request Header page is saved, the data is inserted into the staging tables
for change requests, CHNG_RQST and CHNG_RQST_DTL, and the request is given a
status of Pending Approval.
3. A workflow event triggers the ReqAmtAppr eProcurement workflow approval rule.
This event is only triggered if the status of the change request is pending approval and the
unit price or quantity has been increased from the original order. A worklist entry is
routed to the requester’s supervisor. The change request can also be routed through
amount approval workflow if the amount requires approval. If the change request does
not increase price or quantity, it is routed to the Change Request Pending Approval page
for a buyer to review and approve.
4. When the supervisor enters the PeopleSoft eProcurement home page, the To Do List
displays change requests that require supervisor approval.
5. The supervisor selects the worklist entry to view and approve change requests, and the
business process PV_PO_CHNG_REQST routes the requests to the Change Request
Pending Approval page for buyer approval.
6. When the buyer enters the Buyer Station and selects Approve Change Requests, all
change requests that need approval appear on the Change Request Pending Approval
page.
7. The buyer clicks the Change Approval button to access the Change Request Details page
and approve or deny change requests.
See Also
“Using Change Request and Change Orders,” Entering a Change Request
“Using Change Request and Change Orders,” Reviewing and Approving Change Requests
“Using Change Request and Change Orders,” Viewing Change Requests That Need Approval
“Using Change Request and Change Orders,” Understanding PeopleSoft eProcurement
Change Requests
Configuring PeopleSoft Workflow With PeopleSoft eProcurement
This section discusses how to:
3-8
USING WORKFLOW PROCESSES
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
•
Define workflow rule.
•
Define workflow rule steps.
•
Define workflow step criteria.
•
Define workflow rule assignments.
EPROCUREMENT
PEOPLEBOOK
The standard PeopleSoft workflow requires advanced technical skills in PeopleTools to create
and maintain workflow. PeopleSoft eProcurement provides an alternative workflow that is
easier to create and maintain. For example, all the steps in PeopleSoft eProcurement
workflow are performed using PeopleSoft pages rather than underlying PeopleCode. And
functional users can design and maintain workflow.
PeopleSoft eProcurement workflow uses two processes:
•
The Run Initialize Workflow process routes a requisition from one workflow step to
the next.
•
The Workflow Notification process escalates neglected workflow notifications and
performs receipt notification workflow.
Stopping Approval Steps
You can design workflow to stop at a particular step under certain conditions. If the criteria
for a step are met, the step’s routing is executed and the workflow rule stops; no further steps
are evaluated. For example, if you have a special type of item that only a certain person
approves, you might want to route only to that individual. The stop rule feature only applies
downstream, so it is important to sequence steps accordingly. In this case, the special item
step should have a lower step number than other rule steps.
Skipping Approval Steps
You can design workflow to skip a particular step, such as a lower-level approval when a
higher-level approval is required anyway. For example, if your steps are designed to require
supervisor approval for any requisition over 10 USD and manager approval for any requisition
over 500 USD, a requisition of 1,000 USD would require both approvals. Skipping a step
would allow you to bypass the supervisor approval.
Workflow Dynamic Rules
Many organizations have existing table structures that support approval hierarchy, as well as
support the dollar amounts associated with any one individual. Instead of re-entering this data
into the Workflow Approval setup pages, use Dynamic Rules.
The concept of Dynamic Rules is simple:
•
A rule is created and marked as a Dynamic Rule.
•
Only one step is allowed in the Rule Definition.
•
A Query must be created by the customer that, when given a user ID, returns the
maximum dollar amount and currency that the user can approve.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING WORKFLOW PROCESSES
IN
PEOPLESOFT
EPROCUREMENT
3-9
PEOPLESOFT 8.4
EPROCUREMENT
•
PEOPLEBOOK
A Query must be created by the customer that, when given a user ID, returns the next
required approver.
Common Elements Used in This Section
3-10
Rule ID
The rule identifier is the key aspect of the rule definition.
This unique 12-character alphanumeric or identification
number field identifies the rule definition.
Rule Definition
A rule definitions is the highest level definition for
workflow. An example of this would be “Requisition
Amount Approval.” Each definition contains unique
attributes and rules that comprise the workflow process.
Rule Step
Rule steps define rule definitions. Each rule definition
may include multiple rule steps, which contain roles that
route a transaction. Steps are executed in sequence
starting with the lowest step number and continuing to the
highest. For example, the rule step for Amount Approval
might consist of the employee’s role and his or her ability
to approve a requisition. Subsequent steps might specify
the employee’s manager or director’s role and their ability
to approve the requisition.
Step Criteria
Step criteria defines the fields and values that trigger a
workflow routing, and they may also contain one or
multiple criteria. When criteria is met, a requisition
worklist entry is routed to the Rile specified at the rule
step level.
Criteria Values
Step criteria may be assigned multiple values that, if
present, will execute a trigger for routing.
Currency Code
Identifies the currency of the rule definition. If the
currency code defined for the rule differs from the
transaction code, all transaction rows that match the rule
criteria will convert into the criteria currency.
Exchange Rate Type
Identifies the exchange rate to be used in a currency
conversion.
Currency Record
The currency record for the transaction.
Currency Field
The currency field for the transaction.
USING WORKFLOW PROCESSES
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Pages Used to Configure PeopleSoft Workflow With PeopleSoft
eProcurement
Page Name
Object Name
Navigation
Usage
Workflow Rule
PV_WF_RULE
eProcurement,
Procurement
Application
Administration
Create rule definitions
and define the
parameters for the rule.
Click the Maintain
Workflow link.
Click the Workflow
Rules link to access the
Workflow Rule page.
Workflow Rule Step
PV_WF_RULE_STEP
Click the Go To Steps
for this Rule link at the
bottom of the
Workflow Rule page.
Define steps within a
rule definition as well
as who receives the
routing for each step.
Workflow Step Criteria
PV_WF_STEP_CRTA
Click the Go To
Criteria for this Step
link at the bottom of
the Workflow Rule
Steps page.
Identify the criteria of a
step.
Workflow Criteria
Value
PV_WF_CRTA_VAL
UE
Click the Go To Values
for this Criteria link at
the bottom of the
Workflow Step Criteria
page.
Define a range of field
values for step criteria
to execute the trigger.
Workflow Rule
Assignment
PV_WF_BU_ASSIGN
eProcurement,
Procurement
Application
Administration
Attach one or more
workflow rules to a
business unit.
Click the Maintain
Workflow link.
Click the, Workflow
Rule Assignment link
to access the Workflow
Rule Assignment page.
Defining Workflow Rule
Access the Workflow Rule page.
Number of Days
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
Enter the number of days a transaction can remain at one
workflow step before being escalated. This is the length
of time an approver has to do something such as approve,
deny, or hold a transaction.
USING WORKFLOW PROCESSES
IN
PEOPLESOFT
EPROCUREMENT
3-11
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Number of Hours
Enter the number of hours a transaction can remain at one
workflow step before being escalated. This field is
combined with Number of Days to determine the total
time an approver has to take action on an approval
request.
Rule Type
Defines the workflow rule type. Values are:
Static: Select to identify a range of step values—defined
on the Workflow Criteria page—that trigger each time
specific criteria are met. During runtime, the workflow
engine processes each step in the rule definition that meets
selected criteria.
Query: Select to query the number of approval steps and
routings required for a specific workflow. You identify
the amount query with a single rule definition step.
Upgrade: See PeopleSoft Application Designer
PeopleBook, “Upgrading with PeopleSoft Application
Designer”
See Also
Using the Workflow Notification Process
Defining Workflow Rule Steps
Access the Workflow Rule Step page.
Select the type of action required from a user who receives
the routing from this step. Values are:
Approver Type
Approver: The user must approve or deny the transaction
in order for the workflow process to continue.
Reviewer: The user is routed the transaction but no action
is required. Reviewers are just informed of a transaction’s
approval process.
Values are:
Role Type
Dynamic: Select when role is determined by the
requisition data that is resolved from a query role.
Reviewer: The user is routed the transaction but no action
is required. Reviewers are just informed of a transaction’s
approval process.
Static: Select to route transactions to all role users.
Select the user list role used by workflow to route the
transaction to all users filling that role. (This is usually
based on job function, not individual users.)
Role Name
3-12
USING WORKFLOW PROCESSES
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
To route workflow to a smaller set of users or a specific
user, enter a query that routes the transaction based on a
SQL object executed during the Run Initialize Workflow
process (PV_RUN_WF_INIT).
Query
Note. PeopleSoft eProcurement workflow is delivered
with some predefined query SQL objects, including
Supervisor by RequestorID and Supervisor by UserID.
You can define additional SQL. Any SQL objects you
create to be used as query roles must follow the naming
convention of PVWF_xxxx, where xxxx describes the
type of query (for example,
PVWF_ROLE_SUPERVISOR_BY_OPRID and
PVWF_ROLE_SUPR_BY_REQUESTORID).
Self Approval
Select to restrict approvers’ ability to approve their own
requisitions. Use the Amount field to specify amount
limits for self-approval.
Amount
Specify the maximum amount that approvers for this step
can approve for their own requisitions. If a requisition
exceeds this approval amount, workflow routes the
requisition to the next step.
See Also
Running the Initialize Workflow Process
Defining Workflow Step Criteria
Access the Workflow Step Criteria page.
Defines how the field values, used to trigger the step, are
specified on this step criteria. This works in conjunction
with the Workflow Criteria Value page. Values are:
Value Type
All Values: No values are defined and the step is triggered
if the requisition exceeds the value specified in the
Amount field. This allows you to trigger a routing based
on the amount regardless of the value in the Record and
Approval Field fields.
Static: A range of specific values is defined on the
Workflow Criteria Value page. When the requisition
matches one of these values, the step is triggered.
Approval Field
Enter the field within the record to be used when
comparing the requisition to the step criteria values. This
is a required field.
Amount Record
Enter the record name to be used when comparing the
requisition to the minimum amount required to trigger the
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING WORKFLOW PROCESSES
IN
PEOPLESOFT
EPROCUREMENT
3-13
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
step. This is a required field.
Amount Field
Enter the field within the amount record to be used when
comparing the requisition to the minimum amount
required to trigger the step. This field must contain a
numeric value and is required.
Amount
Enter the minimum amount required on the requisition in
order to trigger the step. The system identifies all lines in
the requisition that meet the criteria defined above in the
Amount Record and Approval Field fields. The amounts
on these lines are totaled based on the amount record and
amount field specified. If the requisition total is higher
than this minimum amount, the criteria is met. If no
amount is specified, zero is considered the minimum.
Use these records to set up step criteria for the fields on a requisition:
Record Name
Description
REQ_HDR_VW
View of requisition header
REQ_LINE_VW
View of requisition line
REQ_LINE_SHP_VW
View of requisition shipment
schedule line
PV_REQ_LN_DT_VW
View of requisition distribution
line
REQ_COMMENTS
View of requisition comments
PV_ITM_DESCR_VW
View of item description page
Defining Workflow Rule Assignments
Access the Workflow Assignments page.
Schedule Approval Process
Select if requisition approval workflow should not be
automatically launched (initialized).
Note. If you do not select this checkbox, requisition
approval workflow is automatically initialized when you
save and submit a requisition on the Requisition Summary
page. No process or manual intervention is required.
Enter a rule that must be completed prior to the execution
of this row’s rule ID. This enforces sequential rule
execution. To run the rules in parallel, leave this field
blank.
Prior Rule
Attach one or more workflow rules to a business unit. You can identify if your workflow
rules should launch in sequential order or in parallel.
3-14
USING WORKFLOW PROCESSES
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
See Also
“Creating Requisitions in PeopleSoft eProcurement,” Creating a Requisition
Configuring the PeopleSoft eProcurement Workflow Builder
This section discusses how to configure and use the PeopleSoft eProcurement Workflow
Builder.
You can use the workflow builder to design custom workflow rules, steps, criteria, values, and
workflow rule assignments. You can view a graphical layout of your entire workflow process
at a glance or in detail. As you build new definitions for workflow steps, criteria, and values,
links become available, which enable you to return to the appropriate workflow page to edit
the definition. By clicking the image that corresponds to a task in your workflow process, you
can automatically enter your workflow definitions. Although you always use the same
eProcurement workflow pages to create your unique rule structure, the workflow builder
enables you to view the status of your entire rule to determine which elements have not been
completed.
Use the workflow builder to:
•
View all rules associated or not associated with a particular business unit.
•
View the relationship between workflow rules, rule steps, step criteria, criteria value,
and rule assignments.
•
Create multiple steps and criteria for your new rule definition.
•
Modify your rule structure.
•
View rule precedence to determine which rules are parallel throughout your business
process.
Here is a graphical display of PeopleSoft eProcurement Workflow Builder:
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING WORKFLOW PROCESSES
IN
PEOPLESOFT
EPROCUREMENT
3-15
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
PeopleSoft eProcurement Workflow Builder
Pages Used to Configure PeopleSoft eProcurement Workflow Builder
Page Name
Object Name
Navigation
Usage
Workflow Rule
PV_WF_RULE
eProcurement,
Procurement
Application
Administration
Create rule definitions
and define the
parameters for the rule.
Click the Maintain
Workflow link.
Click the Workflow
Rules link to access the
Workflow Rule page.
3-16
USING WORKFLOW PROCESSES
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
Workflow Rule Steps
PV_WF_RULE_STEP
Click the Go To Steps
for this Rule link at the
bottom of the
Workflow Rule page.
Define all steps within
a rule definition as well
as who receives the
routing for each step.
Workflow Step Criteria
PV_WF_STEP_CRTA
Click the Go To
Criteria for this Step
link at the bottom of
the Workflow Rule
Steps page.
Identify the criteria of a
step.
Workflow Criteria
Value
PV_WF_CRTA_VAL
UE
Click the Go To Values
for this Criteria link at
the bottom of the
Workflow Step Criteria
page.
Define a range of field
values for step criteria
to execute the trigger.
Workflow Rule
Assignment
PV_WF_BU_ASSIGN
eProcurement,
Procurement
Application
Administration
Attach one or more
workflow rules to a
business unit.
Click the Maintain
Workflow link.
Click the, Workflow
Rule Assignment link
to access the Workflow
Rule Assignment page.
Using the PeopleSoft eProcurement Workflow Builder
Use the PeopleSoft eProcurement Workflow Builder to design your unique workflow rules in
a graphical environment. You can view a display of your workflow structure while building
complex workflow rules.
To design your workflow rule structure:
1. Navigate to the Workflow Rule page.
2. Complete the required information and click the Go To Builder link at the top of the page
to access the Workflow Builder. If you decide not to use the workflow builder, click the
Go To Step For This Rule link to access the next page in the workflow process.
Note. When accessing the workflow builder directly from the Workflow Rule page, the
builder is display only. Modification to the workflow builder at this level causes a
change in all business unit structures that call upon this rule definition. When modifying a
workflow rule associated with multiple business units, you receive a warning that the
modification also impacts other business units.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING WORKFLOW PROCESSES
IN
PEOPLESOFT
EPROCUREMENT
3-17
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
3. Once you’ve completed the definitions for the new workflow rule, click Save to commit
to the new workflow rule definition.
Configuring PeopleSoft eProcurement Requisition Approval
Workflow
This section discusses how to:
•
Run the initialize workflow process.
•
Use the requisition approval process.
•
Use the workflow notification process.
•
View additional requisition approvals.
When a requisition is complete and the user clicks the Save and Submit button on the
Requisition Summary page, the Run Initialize Workflow process is launched and the
requisition is submitted to workflow for approval. This process evaluates every workflow rule
and the initial steps within it. When the criteria of a workflow step matches the requisition, a
worklist entry is sent to the approver.
3-18
USING WORKFLOW PROCESSES
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Requisition
entered by
clicking the Save
& Submit button
Workflow Rule
Engine process
Starts with first step of all rules with no
prior rule designated.
Skip Rule selected on
WF Rule Step page?
Step in rule is
evaluated
Yes
Go to next rule
Yes, go to next step
No
Yes
Worklist entry
routed for req
approval
Does requisition
match step criteria?
No
Other steps in this
rule?
No
Approver selects
worklist entry
and takes action
on req approval
Deny
Hold
No
This rule is a "prior
rule" to another rule?
Approve
Requisition is
denied
Stop Rule selected on
WF Rule Step page?
Yes
No
Yes
Req approval
process on hold
Rule finished. No
more steps
processed
No
Stop Rule selected on
WF Rule Assign page?
Yes
Approval finished. No
more rules processed
PeopleSoft eProcurement Requisition Approval Workflow
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING WORKFLOW PROCESSES
IN
PEOPLESOFT
EPROCUREMENT
3-19
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Pages Used to Configure PeopleSoft eProcurement Requisition Approval
Workflow
Page Name
Object Name
Navigation
Usage
Run Initialize
Workflow
PV_RUN_WF_INIT
eProcurement,
Procurement
Application
Administration
Perform the initial
routing for PeopleSoft
Services Procurement
workflow.
Click the Run
eProcurement
Processes link.
Click the Workflow
Processes link.
Click the Initialize
Workflow Rules link to
access the Run
Initialize Workflow
page.
Requisition Approval
PV_WF_REQ_APPR
Home, Worklist
Select the requisition
ID that needs approval.
Approve, deny, or hold
a requisition during the
workflow approval
process.
Requisition Detail
Summary
PV_REQ_APP_DTL_
GRD
Click the View Request
Details link on the
Requisition Approval
page.
View additional
information about a
requisition that you’re
asked to approve.
Workflow Notification
Process
PV_RUN_VCHR_RE
Q
eProcurement,
Procurement
Application
Administration
Initiate workflow
notification of
neglected worklist
entries and vouchered
POs with no receipts.
Click the Run
eProcurement
Processes link.
Click the Workflow
Processes link.
Click the Workflow
Notification link to
access the Workflow
Notification page
Running the Initialize Workflow Process
Access the Run Initialize Workflow page.
The Run Initialize Workflow is an Application Engine/PeopleCode process that can be
executed from the Save and Submit action on the Requisition Summary page or scheduled
3-20
USING WORKFLOW PROCESSES
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
using PeopleSoft Process Scheduler. The process interprets the rule definitions and routes to
the first approver.
Note. Use the Report Manager and Process Monitor links to archive and view reports and
view process requests and list of available servers.
Using the Requisition Approval Process
Access the Requisition Approval page.
Use this page to approve, deny, or hold a requisition during the workflow approval process.
Additional approvers and reviewers can be added to the workflow routing. If you are a
reviewer, this page is display only.
Note. A user must have a workflow role designed for requisition approval or be the requester
who entered the requisition.
Note. Once a requisition is fully approved, it disappears from the reviewer’s To Do List,
whether or not it has been reviewed.
Using the Workflow Notification Process
Access the Workflow Notification Process page.
The escalation portion of this process searches for requisition approvals not approved, denied,
or put on hold within an acceptable time period. This process uses the escalation parameters
defined on the Workflow Rule page to determine when to escalate and to whom. The
vouchered POs portion of this process searches for PeopleSoft eProcurement purchase orders
with vouchers not received. The system sends a worklist entry to the requester as a reminder
to receive the item.
Note. This process should be set to run in the background on a regular schedule using
PeopleSoft Process Scheduler.
WF Escalation process
Select to escalate any neglected requisition approvals for
the business units selected on this page. When an
approver takes no action for the specified period, the
transaction is routed to the next step based on the
escalation options on the workflow rule.
Vouchered POs with No
Receipt
Select to process the receipt notification workflow. If
PeopleSoft Payables has recorded the voucher (vendor’s
invoice) for the purchase order but no receipt has been
entered, the process inserts a reminder on the requester’s
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING WORKFLOW PROCESSES
IN
PEOPLESOFT
EPROCUREMENT
3-21
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
To Do List.
Business Unit
From:/Business Unit To:
Select to run the Escalation process (ESCALATE) on the
chosen business units.
Note. You cannot select business units for the Vouchered
POs with No Receipt process; it runs against all business
units.
See Also
Defining Workflow Rules
Using Receipt Notification Workflow
Viewing Additional Requisition Approvals
The PeopleSoft eProcurement workflow is currently used for requisition approval, and the
system is delivered with amount approval already designed. However, you can add other
processes, including:
3-22
•
Commodity approval: Requires approval if certain categories of items are entered on
the requisition. For example, you might require approval for items classified as
entertainment but not for office supplies. You could prompt for both item categories
but use different minimum requisition amounts.
•
ChartField approval: Requires approval based on cost distribution. On the distribution
level, the requisition contains the ChartFields to be used when this order is posted as
an accounting entry. The ChartFields can be used to trigger approval. For example, if
the HR department is charged for a requisition, workflow routes the requisition to the
appropriate approver in that department.
•
Special request approval: Requires approval if the requisition is a special request with
no standard item from the item catalog.
•
Suggested vendor: Requires approval if the requester suggests a nonstandard vendor.
•
Item approval: Requires approval if a certain item is ordered.
•
Express forms: Requires approval if the requester uses an express form.
USING WORKFLOW PROCESSES
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CHAPTER 4
Creating Requisitions in PeopleSoft
eProcurement
This chapter provides an overview of requisitions and discusses how to:
•
Create requisitions.
•
Create requisitions with the requisition Navigator.
•
Search for items.
•
Edit line information.
•
Set up and use attachments.
Understanding Requisitions
A requisition is an online form for requesting items or services. Once you enter and submit a
requisition, send it for approval. Approved requisitions are then placed on a purchase order
and dispatched to the vendor, who sends the items that you ordered. Unlike a purchase order,
a requisition does not require an assigned buyer.
Before you enter requisitions into the system, you must be authorized to process requisitions
on the User Preferences page. Also, your user ID must be identified as a requester on the
Requester Setup page, where you add defaults for requisitions.
See Also
PeopleSoft Application Fundamentals for FIN, ESA, SCM, “Defining User Preferences”
Defining Overall User Preferences
Common Elements Used in This Chapter
AM Unit (asset management
unit)
Select a PeopleSoft Asset Management business unit to
capitalize all items on this requisition in PeopleSoft Asset
Management. This entry overrides values that otherwise
appear by default from the item definitions.
Amount
Displays the total item price and the transaction currency
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CREATING REQUISITIONS
IN
PEOPLESOFT
EPROCUREMENT
4-1
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
from the requisition.
4-2
Account
Change this value only to change the standard accounting
structure.
Asset Profile ID
Select an ID to capitalize all items on this requisition in
PeopleSoft Asset Management. This entry overrides
values that otherwise appear by default from the item
definitions.
Capitalize
Select to indicate that the items on this requisition should
be capitalized in PeopleSoft Asset Management. This
check box is available only if a PeopleSoft Asset
Management business unit is selected.
Category
Displays the item category from the Item Definition General page.
Catalog
Displays the name of the PeopleSoft catalog in which this
item is located. Define item catalogs with PeopleSoft
Tree Manager.
Consolidate with other
Reqs (consolidate with other
requisitions)
Select to consolidate multiple requisition for the same
vendor into one purchase order.
Department
Displays any default value from your requester definition.
GL Unit (general ledger
unit)
Displays the PeopleSoft General Ledger business unit that
is defined on the Purchasing Definition - Business Unit
Definition page.
Location Code
Displays the internal location for the delivery of this
requisition; for example, office number, lab name, and so
on. The value comes from your requester setup definition.
Manufacturer
Indicates the item’s manufacturer, which is assigned on
the Manufacturer's Item page.
Manufacturer’s Item ID
Displays the item ID that the manufacturer uses, which is
assigned on the Manufacturer's Item page.
Mfg ID (manufacturer’s ID)
Identifies the item’s manufacturer. This value populates
from the Vendor's Manufacturer Info page.
Mfg Itm ID (manufacturer
item ID)
Displays the identifier that the manufacturer uses for this
item when the suggested vendor supplies the item. This
value populates from the Vendor's Manufacturer Info
page.
Percent
Enter a percentage of the quantity or the amount to
distribute. The system updates either the Amount or
Quantity field value, depending on your selection in the
Distribute by field.
Price
Displays the vendor’s unit price and currency for the item,
which are assigned on the Vendor's UOM & Pricing Info
CREATING REQUISITIONS
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
(vendor’s unit of measure and pricing information) page.
Product
Identifies a product. If you use PeopleSoft Projects, a
Project ID link replaces this field.
Project ID
Click to access the Projects Information page, where you
can enter any information that is relevant to the project.
This field appears only if you are using PeopleSoft
Projects.
Quantity
Enter the quantity of items that you want distributed on
this distribution line. This field appears only if you select
Qty as a distribution method in the Distribute by field.
The system updates the value in the Percent field based on
your entry.
Requester Name
Displays the name of the requester who entered this
requisition.
Search Tips
Click to access the Search Tips page, where you can view
examples of word and character combinations for
searches. This page is available only if you use the Verity
search engine.
Ship To
Displays the organization address that the vendor should
use for delivery for this requisition. The Ship To code
populates this field from your requester definition. Use
the Search button to find the correct Ship To code. Select
the code that represents the correct address. Because this
value comes from the Requester Setup page, edit this field
only if the location is different from the usual one.
Standard Price
Displays the standard price from the item’s Purchasing
Attributes page.
Status
Displays the status of a requisition. Values are Open,
Pending, Approved, and Complete.
Unit of Measure
Displays the unit of measure from the Vendor's UOM &
Pricing Info page for this item.
Vendor
Displays the vendors that supply this item. This
information defaults from the Item Vendor page.
Vendor Item ID
Displays the ID that the vendor uses to identify this item
on the Item Vendor page.
Vendor Loc (vendor
location)
Displays the location of the vendor. The default is based
on the value that is defined for the vendor.
Vnd Itm ID (vendor item
ID)
Displays the vendor’s item ID. It can differ from your
item ID. This field populates from the Purchasing
Attributes - Item Vendor Priority page.
Vndr Catlg (vendor catalog)
Displays the vendor catalog identifier that populates from
the Purchasing Attributes - Item Vendor Priority page.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CREATING REQUISITIONS
IN
PEOPLESOFT
EPROCUREMENT
4-3
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
See Also
PeopleSoft Managing Items PeopleBook, “Defining Items,” Defining General Item
Information
PeopleSoft Managing Items PeopleBook, “Working With Items,” Using Units of Measure
PeopleSoft Purchasing PeopleBook, Defining Purchasing Item Information,” Defining
Purchasing Item Attributes
PeopleSoft Purchasing PeopleBook, “Defining PeopleSoft Purchasing Business Units and
Processing Options,” Defining Purchasing Business Unit Options
“Preface”
Creating Requisitions
This section discusses how to:
•
Select requisition business units and requestors.
•
Create a requisition.
•
Review item information, and check price and availability.
•
(Optional) Edit requisition defaults.
•
Add a requisition justification.
Pages Used to Create a Requisition
Page Name
Object
Navigation
Usage
New Requisition
PV_REQ_ENTRY
eProcurement, Create
Requisition
Select a business unit
and a requester.
Requisition Summary
PV_REQ_FORM
eProcurement, Create
Requisition
Create a requisition, or
edit a requisition that
has been saved but not
submitted.
Click OK on the New
Requisition page to
access the Requisition
Summary page.
Item Description
4-4
CREATING REQUISITIONS
IN
PV_NEW_ITM_DESC
R
PEOPLESOFT
EPROCUREMENT
Click the description
link on the Requisition
Summary page.
View more information
about the linked item.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object
Navigation
Usage
Requisition Defaults
PV_REQ_HDR_DEFA
ULT
Click the Edit Defaults
link on the Requisition
Summary page.
Add, review, or change
the defaults that apply
to each requisition line
on a requisition.
Vendor Search
PV_VNDR_LOOKUP
_WRK
Click the Vendor
Lookup link on the
Requisition Defaults
page.
Search for a vendor.
Req One Time Address
Default (requisition
one-time address
default)
REQ_DFLT_ADDR
Click the One Time
Address link on the
Requisition Defaults
page.
Enter a one-time
address for the current
requisition.
Favorite Items
PV_REQ_ITM_FAVS
Click the Favorite
Items link on the
Requisition Summary
page.
Add your favorites to a
requisition.
Use Templates
PV_REQ_TEMPLATE
S
Click the Item
Templates link on the
Requisition Summary
page.
Add items from a
personal or company
template.
Special Request
PV_REQ_SR_WIZ_M
AIN
Click the Special
Request link on the
Requisition Summary
page.
Indicate what type of
item you are
requesting. Use special
requests to enter
unusual or one-time
items.
Shipping Info
(information)
PV_REQ_SCHEDULE
Click the Shipping
Information button on
the Requisition
Summary page.
Change the shipping
information on a
requisition.
Distribution
Information
PV_REQ_DISTRIB_D
ET
Click the
ChartFields button on
the Shipping
Information page.
Change the way the
shipment is charged to
accounting records
One Time Shipping
Information
PV_REQ_ONETIME_
ADR
Click the OneTime Address button
on the Shipping
Information page.
Create a shipping
location that is used
only for this shipment.
Line Details
PV_REQ_LINE_DTL
S
Click the Line
Details button on the
Requisition Summary
page.
Edit additional details
for a line, such as the
buyer, vendor, and
other line-specific
information.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CREATING REQUISITIONS
IN
PEOPLESOFT
EPROCUREMENT
4-5
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object
Navigation
Usage
Line Comments
PV_REQ_COMMENT
S
Click the
Comments button on
the Requisition
Summary page.
Record a comment
about an item and add
an attachment.
Justification/Summary
PV_REQ_SUMM
Click the
Justification/Summary
link on the Requisition
Summary page.
Enter a justification for
the requisition.
Requisition Detailed
Summary
PV_REQ_DET_SUM
M
Click the View
Detailed Summary link
on the
Justification/Summary
page.
Review the requisition
line, shipment lines,
and distribution lines.
See Also
PeopleSoft Application Fundamentals for FIN, ESA, SCM, “Defining User Preferences”
Defining Overall User Preferences
“Using PeopleSoft eProcurement Administration,” Maintaining System Users and Roles
“Using Favorites”
“Using Item Templates”
“Using Special Requests”
“Implementing Item Searches”
Selecting Requisition Business Units and Requesters
Access the New Requisition page.
The system does not display this page to a requester unless the requester is given access with
PeopleSoft eProcurement role actions. Your user profile must contain a user role that includes
the PeopleSoft eProcurement CHANGEREQBU role action. Add the users on whose behalf
you can purchase on the User Preferences page.
This page enables users to add requisitions to multiple business units or purchase on behalf of
other users. This page lists only the requesters for whom you are authorized to buy.
See Also
PeopleSoft Application Fundamentals for FIN, ESA, SCM, “Defining User Preferences”
Defining Overall User Preferences
“Using PeopleSoft eProcurement Administration,” Maintaining System Users and Roles
4-6
CREATING REQUISITIONS
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Creating a Requisition
Access the Requisition Summary page.
This page normally displays your name as the requester. To purchase on behalf of another
requester, you must have the CHANGEREQBU role action from the eProcurement Role
Actions page assigned to the user roles in your user ID. Also, the user preferences for your
user ID must specify that you can order for other requesters.
Requisition Title
Enter a requisition ID. If this field is blank, the system
assigns a value that is based on the Purchasing business
unit’s sequence for requisitions.
Edit Defaults
Click to access the Requisition Defaults page, where you
can view or change the default information for all
requisition lines on this order.
Click the Run Commitment Control button to initiate the
budget-checking process. This button appears only when
commitment control is enabled for PeopleSoft Purchasing
on the Enable Commitment Control page. When you click
the button, a message appears asking whether to proceed.
If you proceed, your requisition is saved (if it has not been
saved already) and budget-checked. The button no longer
appears if the budget checking status is Valid.
Budget Checking Status
Displays the budget-checking status for the requisition.
Values are Valid, Error, and Not Checked.
Note. If the requisition has already been submitted to
PeopleSoft Workflow, edit an error from the Manage
Requisitions page, then resubmit the requisition to
PeopleSoft Workflow.
Search Catalog
Click to access the Search Catalog page, where you can
select an item to add to this requisition.
Favorite Items
Click to access the Favorite Items page, where you can
add an item to this requisition from your Favorites list.
Item Templates
Click to access the Use Templates page, where you can
select a group of items from a template.
Special Request
Click to access the Special Request page, where you can
enter a requisition for an item that is not defined in your
organization’s item catalog.
Use PCard (use procurement
card)
Select to indicate that a procurement card is used to pay
for this item. To use a procurement card, the item must be
from MarketPlace and have a vendor who accepts
procurement cards.
Click the Shipping Information button to access the
Shipping Information page, where you can change the
shipping location, delivery date, quantity in the shipment,
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CREATING REQUISITIONS
IN
PEOPLESOFT
EPROCUREMENT
4-7
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
and so on.
Click the Line Details button to access the Line Details
page, where you can modify additional details on the line,
such as the buyer, vendor, and other line specific
information.
Click the Comments button to access the Line Comments
page, where you can record a comment about this item or
attach a file to this requisition line. You can send
comments and attachments to the vendor.
Justification/Summary
Click to access the Justification/Summary page, where
you can enter a justification or explanation for a
requisition.
Mark as Template
Click to create a template from this requisition. The
system creates the template when you save the requisition.
Save For Later
Click to save this requisition in Open status. You can edit
the requisition later. The system displays the requisition
number.
Save and Submit
Click to save the requisition and submit it for approval,
sourcing, and dispatching to a vendor. It remains editable
while the status is Open or Pending. If the requisition has
no errors, a message advises you that the requisition has
been saved and provides the requisition number.
See Also
PeopleSoft Application Fundamentals for FIN, ESA, SCM, “Defining User Preferences”
Defining Overall User Preferences
“Using Procurement Cards in PeopleSoft eProcurement”
Reviewing Item Information and Checking Price and Availability
Access the Item Description page.
An image of the item appears, if the item is loaded.
Requisition Price
Indicates the vendor’s price from the item’s Vendor’s
UOM & Pricing Info page.
Check Price and
Availability
Click to update the Requisition Price to the current price
from MarketPlace and to compare the supplier’s available
quantity to the requisition quantity. If the requested
quantity exceeds the available quantity, you will receive
an error message.
Note. This button appears only if this is a MarketPlace
item, and the user has the PeopleSoft eProcurement
PRICEANDAVAILCHECK (price and availability check)
4-8
CREATING REQUISITIONS
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
role action.
See Also
PeopleSoft Managing Items PeopleBook, “Working With Items,” Using Units of Measure
PeopleSoft Managing Items PeopleBook, “Defining Items,” Defining General Item
Information
“Using PeopleSoft eProcurement Administration,” Maintaining System Users and Roles
Editing Requisition Defaults
Access the Requisition Defaults page.
Requisition Defaults page: Distributions Defaults Tab (1 of 2)
Requisition Defaults page: Distributions Defaults Tab (2 of 2)
The data that you enter or that appears on this page applies to the entire requisition. You can
override these values on the requisition line or at the shipment or distribution level.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CREATING REQUISITIONS
IN
PEOPLESOFT
EPROCUREMENT
4-9
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Click to access the Commitment Control Page, where you
can view the commitment control details, override the
transaction, or perform a budget check. This link appears
only if commitment control is enabled for the business
unit.
Run Commitment Control
link
See PeopleSoft Commitment Control PeopleBook,
“Understanding PeopleSoft Commitment Control.”
Override Suggested Vendor
Select to indicate that the buyer or sourcing processes can
override the vendor on any of the requisition lines.
Default
Select to use the defaults from your user, requester, and
business unit definitions, using the default hierarchy for
procurement. When you select this option, the default
values are display-only.
Override
Select to override the default values from your user,
requester, and business unit definitions. The default
values that appear are editable.
Line Defaults
Select the ID of the vendor from which the items on this
requisition are coming. You can override this vendor ID.
Vendor
The default location for the selected vendor appears to the
right of the Vendor field. You can select a different
location.
Warning! Change the vendor location carefully.
Purchase orders are not sent to MarketPlace unless the
vendor ID and vendor location match those values on the
MarketPlace Supplier Setup page.
Vendor Lookup link
Click to access the Vendor Search page and search for a
vendor.
One Time Address link
Click to access the One Time Address Default page,
where you can enter a ship to address that is not in your
standard ship to location codes.
Buyer
Select a buyer for this requisition. At the requisition line
level, the system uses the buyer from the item definition.
Note. Any default values that appear in the ChartFields group box come from the item
definition—according to the item default hierarchy in PeopleSoft eProcurement and
Purchasing.
Note. The ChartField values on this page are described further in the Preface of this
PeopleBook.
4-10
CREATING REQUISITIONS
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
See Also
PeopleSoft Application Fundamentals for FIN, ESA, SCM, “Defining and Using ChartFields,”
Understanding ChartFields
PeopleSoft Commitment Control PeopleBook, “Setting up Basic Commitment Control
Options,” Understanding Basic Commitment Control Set Up
PeopleSoft Setting Up Procurement Options PeopleBook, “Maintaining Vendor Information,”
Using Vendor Search Capabilities
“Preface”
Common Elements Used In This Chapter
Adding a Requisition Justification
Access the Justification/Summary page.
Total
Displays the extended price for this requisition line, which
is calculated by multiplying the unit price by the quantity
that you order.
Use PCard
Select this option to use a procurement card to pay for this
item.
Justification
Enter an explanation for this requisition. The buyer can
view this field, and it appears on the internal copy of the
purchase order. It also appears on the workflow approval
pages for the approver. The vendor’s copy of the PO
(purchase order) does not include the justification.
View Detailed Summary
Click to access the Requisition Detailed Summary page,
where you can view the requisition lines, shipping details,
and distribution details.
See Also
PeopleSoft Purchasing PeopleBook, Defining Purchasing Item Information,” Defining
Purchasing Item Attributes
“Using Procurement Cards in PeopleSoft eProcurement”
Creating Requisitions With the Requisition Navigator
The requisition Navigator tool appears on each page that you use to create and submit a
requisition, if you have the PeopleSoft eProcurement NAVIGATOR role action. The
Navigator provides access to the pages that you use to create a requisition.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CREATING REQUISITIONS
IN
PEOPLESOFT
EPROCUREMENT
4-11
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
The Navigator appears on all requisition pages until you save and submit the requisition. The
availability of links changes, depending on where you are in the process of building a
requisition. A check mark appears next to each link when the step is complete.
This section discusses how to:
•
Change a shipping address.
•
Change distribution information.
See Also
“Using eProcurement System Administration,” Attaching Role Actions to User Roles
Creating Requisitions
Pages Used to Create Requisitions With the Requisition Navigator
4-12
Page Name
Object
Navigation
Usage
New Requisition
PV_REQ_ENTRY
eProcurement, Create
Requisition
Assign a business unit
and a requester.
Search Catalog
PV_REQ_ITM_RESU
LTS
Click the Search
Catalog link on the
requisition Navigator.
Search and browse for
items.
Favorite Items
PV_REQ_ITM_FAVS
Click the Favorite
Items link on the
requisition Navigator.
Add your favorites to
the requisition.
Use Templates
PV_REQ_TEMPLATE
S
Click the Item
Templates link on the
requisition Navigator.
Add items from a
personal template or a
company template.
Special Request
PV_REQ_SR_WIZ_M
AIN
Click the Special
Request link on the
requisition Navigator.
Indicate what type of
item you are
requesting. Use special
requests to enter
unusual or one-time
items.
Shipping Defaults
PV_REQ_SHIP_DFLT
Click the Shipping link
on the requisition
Navigator.
Change shipping
information for the
current requisition.
Req One Time Address
(Requisition One Time
Address)
REQ_DFLT_ADDR
Click the One Time
Address link on the
Shipping Defaults
page.
Enter a one-time
address for the current
requisition.
Accounting Defaults
PV_REQ_DIST_DFLT
Click the Accounting
link on the requisition
Navigator.
Change distribution
information for the
current requisition.
CREATING REQUISITIONS
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object
Navigation
Usage
Comments
PV_REQ_SUMM_WI
ZARD
Click the Comments
link on the requisition
Navigator.
Attach comments to the
current requisition.
Manage Requisitions
PV_REQ_STATUS
Click the View Status
link on the requisition
Navigator.
Review the status of
requisitions.
This link becomes
available when you
save the requisition for
later or save and
submit it.
Requisition Approval
Status
PV_WORKFLOW_AP
PR
Click the View
Approvals link on the
requisition Navigator.
View the approval
steps and current status
of a requisition line.
Requisition Summary
PV_REQ_FORM
Click the View
Summary link on the
requisition Navigator.
Add, review, or update
a requisition.
See Also
“Using eProcurement System Administration,” Attaching Role Actions to User Roles
Creating Requisitions
“Using Favorites”
“Using Item Templates”
“Using Special Requests”
“Implementing Item Searches”
Changing the Shipping Address
Access the Shipping Defaults page through the requisition Navigator.
To change the shipping address for the current requisition:
1. Select a Ship To code and a due ate or select the address to which to ship this requisition.
2. Click the One Time Address link, and enter shipping information.
Changing Distribution Information
Access the Accounting Defaults page.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CREATING REQUISITIONS
IN
PEOPLESOFT
EPROCUREMENT
4-13
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Select the appropriate values for the requisition if you must deviate from the default
accounting structure.
Note. The ChartField values on this page are described further in the Preface of this
PeopleBook.
See Also
PeopleSoft Application Fundamentals for FIN, ESA, SCM, “Defining and Using ChartFields,”
Understanding ChartFields
PeopleSoft Setting Up Procurement Options PeopleBook,” Using Voucher and Order
Contracts,” Entering Projects Information
PeopleSoft Setting Up Procurement Options PeopleBook, “Defining Procurement Options,”
Using SpeedCharts
PeopleSoft Purchasing PeopleBook, “Defining PeopleSoft Purchasing Business Units and
Processing Options,” Defining Purchasing Business Unit Options
“Preface”
Searching for Items
This section discusses how to:
•
Search and browse for items.
•
Use advanced search options.
•
Review item details.
Pages Used to Search for Items
Page Name
Object
Navigation
Usage
Search Catalog
PV_REQ_ITM_RESU
LTS
eProcurement, Create
Requisition
Search or browse the
item catalog for items
to put on a requisition.
Click OK on the New
Requisition page to
access the Requisition
Summary page.
Click the Search
Catalog link on the
Requisition Summary
page.
4-14
CREATING REQUISITIONS
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object
Navigation
Usage
Search Catalog Advanced Search
PV_SRCH_REQ_PAR
AM
Click the Advanced
Search link on the
Search Catalog page.
Use advanced search
features, such as
Boolean searching and
searching by category,
to add items to a
requisition.
Search Tips
PV_SRCH_REQ_TIPS
Click the Search Tips
link on the Search
Catalog page. This
link appears only if you
use the Verity search
engine.
Review advanced
search methods.
Search Settings
PV_SRCH_REQ_PRE
F
Click the Search
Settings link on the
Search Catalog Advanced Search page.
Set the Advanced
Search page or the
Search Catalog page as
the default for
searches.
Search Catalog - Item
Description
PV_ITM_DESC
Click a linked item
description on the
Search Catalog page.
View more information
about an item on the
Search Catalog page.
See Also
Creating a Requisition
Using Advanced Search Options
Reviewing Item Details
Searching and Browsing for Items
Access the Search Catalog page.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CREATING REQUISITIONS
IN
PEOPLESOFT
EPROCUREMENT
4-15
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Search Catalog page
Note. Each Item in the shopping cart is a line item and does not reflect the quantity of items
in a particular line. To view updated quantities, go to the Requisition Summary page. The
amount in the shopping cart reflects the total amount of the requisition.
Summary
Click to save any items that you select on this page and to
access the Requisition Summary page.
Search
Use any combination of letters, numbers, and spaces. The
field is not case-sensitive. Don’t use quotation marks,
Boolean search qualifiers, wild cards, punctuation marks
(except for the apostrophe), or special characters, such as
%, |, ^, #, @, $, (, and ).
Note. Consecutive words are treated as a phrase, and the
search finds words that appear in that order. For example,
a search for bike frame finds such as bike frame, steel and
bike frame, aluminum, but not auto frame or frame
support.
Note. If you use the Verity search engine, you can use
Boolean search terms such as AND, OR, and NOT as
connectors.
Advanced Search
4-16
CREATING REQUISITIONS
IN
PEOPLESOFT
Click to access the Advanced Search page, where you can
search for an item by manufacturer, vendor, description,
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
and so on.
Browse Catalogs
Click All Items to view categories of items and browse
item categories.
Note. To use the Browse functionality, create a
PeopleSoft tree using item categories. Then attach the tree
to each requester who should have access to this tree using
the Requester Setup page.
Merchants
If your PeopleSoft eProcurement system uses any direct merchants, and your search results
include their products, the products appear here. You can link directly to their websites to
enter orders, and the orders can be transferred automatically into a PeopleSoft eProcurement
requisition.
Express Forms
If your PeopleSoft eProcurement system uses any express forms, and your search results
include the products or services on those forms, the products appear here.
Item Results
Items might appear in this area before a search is performed if they are in the All Items
category.
Search results include:
Appears next to any row with a preferred vendor in the
Vendor column.
Item Description
Click to access the Search Catalog - Item Description
page, where you can view details about the item.
Vendor
Displays the name of the vendor who supplies this item.
The system uses the vendor’s default location. You can
change to another location with the Requisition Defaults
page. If more than one vendor supplies the same item,
you might see multiple rows for the item. To view more
than one vendor, you must have the eProcurement
VIEW_ALL_VENDORS role action.
Compare
Select this check box to compare your item results with
other items from the selected category that share the same
attributes.
Note. To use this feature, you must load or enter
attributes into the PeopleSoft eProcurement system. Once
attributes are loaded or entered, users with the appropriate
role action can view a comparison matrix at the bottom of
the Search Catalog page.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CREATING REQUISITIONS
IN
PEOPLESOFT
EPROCUREMENT
4-17
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
See Also
PeopleSoft Working with Customers and Orders PeopleBook, “Setting Up Tree-Based
Corporate Customers”
“Implementing Item Searches, ”Updating Item Searches”
“Using PeopleSoft eProcurement Administration,” Setting up eProcurement Installation
Options
”Using MarketPlace with PeopleSoft eProcurement”
“Direct Merchant Integration”
“Using Favorites”
“Creating Express Forms”
Using Advanced Search Options
Access the Search Catalog – Advance Search page.
Search Catalog - Advanced Search page (1 of 2)
4-18
CREATING REQUISITIONS
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Search Catalog - Advanced Search page (2 of 2)
Note. Each Item in the shopping cart is a line item and does not reflect the quantity of items
in a particular line. To view updated quantities, go to the Requisition Summary page. The
amount in the shopping cart reflects the total amount of the requisition.
Summary
Click to save items that you select on this page and to
access the Requisition Summary page.
Description
Enter a phrase, word, or partial word to search for the item
description from the Purchasing Attributes page.
These fields appear only if you use the Verity search engine.
Model
Manufacturer's model number or description.
UPN (universal product
numbers)
Enter the UPN ID that is assigned to a unique combination
of item ID, manufacturer ID, and unit of measure.
The UPN appears on the Search Catalog - Item
Description page when it is tied to an item manufacturer.
Match Case
Select this check box to require that the search results
match the case that you used for the search terms that you
entered. An example of this is a search for a specific
brand name. This check box appears only if you select the
Include Synonyms check box on the Search Settings page.
Included Categories
Use this group box to search within one or more
categories and within subcategories.
Select from Catalogs > All
Click to display a list of categories to include in your
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CREATING REQUISITIONS
IN
PEOPLESOFT
EPROCUREMENT
4-19
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
search. The categories listed are the same as those that
appear when you click All Items on the Search Catalog
page.
Items
Select the check box for each category to include in the
search. Click a linked category name to display any
subcategories, each with its own check box, so you can
select from among them. Click the All Items link to
return to a display of all categories.
Click the expand button to increase the fields for item
attribute searches. This button appears only if you use
item attribute searches and have assigned attributes to at
least one of the selected categories.
Displays the category or subcategory that is associated
with the item attribute. Categories that you do not select
may appear in this column if they are subcategories of a
selected category.
From Category/Child
Category
See Also
PeopleSoft Working with Customers and Orders PeopleBook, “Setting Up Tree-Based
Corporate Customers”
PeopleSoft Managing Items PeopleBook, Working With Items, Using Universal Product
Numbers
“Implementing Item Searches,” Implementing the Verity Search Engine
Searching and Browsing for Items
Reviewing Item Details
Access the Search Catalog - Item Description page.
4-20
Vendor
Displays the vendor name. If you enter the vendor’s
uniform resource locator (URL) on the Maintain Vendor
Hyperlinks page, this vendor name links to the vendor’s
website.
Description
Indicates which PeopleSoft catalog contains this item.
Define item catalogs with PeopleSoft Tree Manager.
Ship To Location
Select from the available locations to find this item’s
availability in the inventory for the selected location.
UPN ID (universal product
number)
Displays the UPN ID when the UPN is tied to an item
manufacturer.
GPO (group purchasing
organization)
Displays the GPO when the GPO is tied to an item or
vendor manufacturer.
CREATING REQUISITIONS
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Note. Manufacturers and vendors appear according to the value that you select for the Show
Items From field on the Search Catalog page.
See Also
PeopleSoft Purchasing PeopleBook, Defining Purchasing Item Information,” Defining
Purchasing Item Attributes
PeopleSoft Managing Items PeopleBook, “Defining Items,” Defining General Item
Information
PeopleSoft Managing Items PeopleBook, Working With Items, Using Universal Product
Numbers
PeopleSoft Managing Items PeopleBook,” Using Group Purchasing Organizations
“Using PeopleSoft eProcurement Administration,” Entering the URL for a vendor’s website
Searching and Browsing for Items
Editing Line Information
This section discusses how to:
•
Change shipping information.
•
Create a one-time shipping address.
•
Edit the cost distribution.
•
Edit line details.
•
Add line comments.
Pages Used to Edit Line Information
Page Name
Object
Navigation
Usage
Requisition Summary
PV_REQ_FORM
eProcurement, Create
Requisition
Create a requisition, or
edit a requisition that
has been saved but not
submitted.
Click OK on the New
Requisition page to
access the Requisition
Summary page.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CREATING REQUISITIONS
IN
PEOPLESOFT
EPROCUREMENT
4-21
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object
Navigation
Usage
Shipping Information
PV_REQ_SCHEDULE
eProcurement, Create
Requisition
Change the shipping
location, delivery date,
and shipment quantity
for a requisition line.
Click OK on the New
Requisition page to
access the Requisition
Summary page.
Click the Shipping
Info button on the
Requisition Summary
page.
One Time Shipping
Information
Distribution
Information
PV_REQ_ONETIME_
ADR
PV_REQ_DISTRIB_D
ET
Click the OneTime Address button
on the Shipping
Information page.
Create a shipping
location that is only for
this shipment.
Click the
ChartFields button on
the Shipping
Information page.
Review or change how
this shipment is
charged to accounting
records.
Use a one-time
shipping address to
ship the item to a
location that is not a
defined ship to
location.
Split the cost of this
shipment between
accounting
departments.
Because accounting
structure comes from
the Requester Setup
and Purchasing
Attributes pages, use
this page for changes
only.
Line Details
4-22
CREATING REQUISITIONS
PV_REQ_LINE_DTL
S
IN
PEOPLESOFT
EPROCUREMENT
Click the Line
Details button on the
Requisition Summary
page.
Modify additional line
details, such as the
buyer, contract, vendor,
manufacturer, price
options, replenishment,
and inspection
requirements.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object
Navigation
Usage
Line Comments
PV_REQ_COMMENT
S
Click the
Comments button on
the Requisition
Summary page.
Record a comment
about this item, and
send comments to the
vendor.
Add attachments to a
requisition line.
See Also
Creating a Requisition
Changing Shipping Information
Creating a One Time Shipping Address
Editing Line Details
Adding Line Comments
Changing Shipping Information
Access the Shipping Information page.
Override Suggested Vendor
Select to indicate that the buyer or sourcing processes can
override the vendor that appears here.
Attention
Enter the name of the person who receives the item at the
ship to location. The default is the requester’s name. This
field appears on purchase orders that are sent to
MarketPlace.
Due Date
The default date is based on the lead time in the item
definition.
Click the Cost Distribution Info button to access the
Distribution Information page, where you can change the
cost distribution for this line.
Click the One Time Address Push button to access the
One Time Shipping Information page, where you can
create a unique shipping location for this shipment.
See Also
”Using MarketPlace with PeopleSoft eProcurement”
Creating a One-Time Shipping Address
Access the One Time Shipping Information page.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CREATING REQUISITIONS
IN
PEOPLESOFT
EPROCUREMENT
4-23
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
To create a unique shipping address for a shipment:
1. Enter the address and related information.
2. Click Return to save the address.
Editing the Cost Distribution
Access the Distribution Information page.
Distribution Information page
Note. Only use this page to alter the default accounting structure for a requisition.
Use this field to split a distribution line. Values are:
Distribute by
Amt: Select to display the Amount field in the Cost
Distribution area and distribute by amount. The sum of all
distributed amounts must equal the schedule amount (the
display-only value in the Amount field for this line).
Qty: Select to display the Quantity field in the Cost
Distribution area and distribute by quantity. The sum of
all distribution quantities must equal the schedule quantity
(the display-only value in the Quantity field for this line).
Distributions are updated as percentage of the amount or
quantity in the Percent field.
4-24
Distributed Quantity
Displays the quantity that you can distribute, depending
on the value that you select in the Distribute by field.
SpeedChart
Select a SpeedChart code. When you click outside of the
field, the system retrieves the ChartFields that are defined
for that SpeedChart and applies them to the distribution of
CREATING REQUISITIONS
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
this schedule. To use SpeedCharts, set the Distribute by
field to Amt. The SpeedChart feature enables you to use a
code that contains preset distributions.
Details Tabs
Note. The ChartField values on this page are described further in the Preface of this
PeopleBook.
See Also
PeopleSoft Application Fundamentals for FIN, ESA, SCM, “Defining and Using ChartFields,”
Understanding ChartFields
“Preface”
Common Elements Used in This Chapter
Editing Line Details
Access the Line Details page.
View Hierarchy
Click to access the Catalog Hierarchy page, where you can
view an item’s catalog hierarchy information.
Buyer, Vendor, and Vendor
Loc (vendor location)
Displays the first priority buyer, vendor, and vendor
location by default from the Purchasing Attributes - Item
Vendor Priority page. You can override the defaults or
enter values in clear fields.
Calculate Price
Select to have the PO Calculation (purchase order
calculation) process recalculate the sourced PO price
based on the selected vendor. If this check box is clear,
the system uses the requisition price as the PO price, and
no recalculations occur.
Zero Price Indicator
Select if the price on the requisition is 0, and you
acknowledge that this is a zero-priced item.
RFQ Required (request for
quote required)
Select to specify that this requisition must be submitted
for vendor quotes before sourcing it to a PO. You can use
the requisition as input on a request for quote regardless of
whether you select this option.
Inspection Required
Select to indicate that you require inspection for the item
on this requisition.
Inspection Routing ID
Click to select an inspection routing ID. This field
becomes available when you select Inspection Required.
A default value may appear from the Item Categories Category Definition 2 page.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CREATING REQUISITIONS
IN
PEOPLESOFT
EPROCUREMENT
4-25
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Device Tracking
Select to track items that are serialized or lot controlled.
Stockless Item
Select to indicate that the item is for replenishment.
See Also
PeopleSoft Purchasing PeopleBook, Defining Purchasing Item Information,” Defining
Purchasing Item Attributes
PeopleSoft Inventory PeopleBook, “Managing Par Inventory”
PeopleSoft Managing Items PeopleBook, “Working With Items,” Using Device Tracking
Adding Line Comments
Access the Line Comments page.
Comment field
Review any comments, which appear on the purchase
order below the requisition line.
Add Attachment
If the purchase order is dispatched in PeopleSoft
eProcurement, this attachment is emailed to the vendor.
Setting Up and Using Attachments
You can attach files to requisitions. The document can be a Microsoft Word file, an Excel
spreadsheet, a PowerPoint presentation, a Visio diagram, or any other type of file. The
requester and buyer can view these attachments. The attachment is added to the purchase
order that is created from the requisition and can be sent to the vendor.
This section discusses how to:
4-26
•
Set up attachments.
•
Use attachments.
CREATING REQUISITIONS
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Pages Used to Set Up and Use Attachments
Page Name
Object
Navigation
Usage
URL Maintenance
URL_TABLE
eProcurement,
Procurement
Application
Administration
Maintain the file
transfer protocol (FTP)
server location for
attachments.
Click the Maintain
Overall System
Options link on the
Administer
Procurement Main
page.
Click the Maintain FTP
Server Location link on
the Maintain Overall
System Options page to
access the URL
Maintenance page. .
Vendor Address
VNDR_ADDRESS
eProcurement,
Procurement
Application
Administration
Enter an address of 001
with the email address
of the vendor to which
to send attachments.
Click the Maintain
Vendors link.
Click the Vendor
Profile link to access
the Vendor Address
page.
Line Comments
PV_REQ_COMMENT
S
Click the Comments
button on the
Requisition Summary
page.
Add attachments to a
requisition.
Requisition Expediter
PV_PO_REQ_SOURC
E
eProcurement,
Expedite Requisition
View attachments as a
buyer.
Notify Vendors of
Attachments
PV_RUN_EMAIL_AT
TCH
eProcurement, Buyer
Station
Send the vendor email
with the purchase order
ID, line number, and
attachment.
Click the Purchase
Order Processes link.
Click the Notify
Vendors of Attachment
link to access the
Notify Vendors of
Attachments run
control page.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CREATING REQUISITIONS
IN
PEOPLESOFT
EPROCUREMENT
4-27
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object
Navigation
Usage
Manage Purchase
Orders
PV_PO_LIST
eProcurement, Manage
Purchase Orders
Enables buyers to view
attachments.
Setting Up Attachments
Access the URL Maintenance page.
To set up attachments:
1. Set up a location for storing attachments.
This is usually an FTP server. Add a subfolder named PV to the root directory. Give read
and write privileges to anonymous users or any users that are specified in the FTP string.
2. On the URL Maintenance page, enter the location that you defined in step 1.
Using the URL identifier PV, enter the URL to use for attachments.
3. On the Vendor Information - Address page, enter an address of 001 with the email address
of the vendor to which to send the attachments.
See Also
“Using PeopleSoft eProcurement Administration,” Entering the URL for a vendor’s website
PeopleSoft Setting Up Procurement Options PeopleBook, “Maintaining Vendor Information,”
Entering Vendor Information
Using Attachments
Access the Requisition Line Comments page.
To use an attachment:
1. On the requisition’s Line Comments page, click the Add Attachments button.
2. Click Browse and select the file to attach.
3. Click Upload.
A message appears, and the attached file name appears on the Line Comments page.
4. Click OK on the Line Comments page to access the Requisition Summary page.
5. Save the requisition from the Requisition Summary page.
6. Run the Notify Vendors of Attachments process (PV_EMAIL_AE) to send the attachment
to the vendor using email after the purchase order is dispatched and published.
4-28
CREATING REQUISITIONS
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
A buyer can view the attachment by clicking the Attachments button for the line on the
Requisition Expediter or Manage Purchase Orders page.
See Also
Creating Requisitions
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CREATING REQUISITIONS
IN
PEOPLESOFT
EPROCUREMENT
4-29
CHAPTER 5
Using Favorites
This chapter provides an overview of the favorites list and discusses how to:
•
Manage your favorites list.
•
Add favorite items to a requisition.
Understanding the Favorites List
You can create a list of frequently ordered (favorite) items and use the list to add items to a
requisition without searching the item catalog. The list that you create is private—accessible
only to you—and is stored under your user ID.
Note. Use item templates to save and reorder groups of items.
Managing Your Favorites List
This section discusses how to:
•
Add items to your favorites list.
•
Delete items from your favorites list.
See Also
”Using Item Templates”
“Creating Requisitions in PeopleSoft eProcurement,” Creating Requisitions
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING FAVORITES
5-1
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Pages Used to Manage Your Favorites List
Page
Object
Navigation
Usage
Requisition Summary
PV_REQ_FORM
eProcurement,
eProcurement
Homepage
Create or edit a saved
requisition that has not
been submitted for
approval.
Click the Create
Requisition link to
access the Requisition
Summary page.
Search Catalog
PV_REQ_ITM_RESU
LTS
eProcurement,
eProcurement
Homepage
Click the Create
Requisition link, and
then click the Search
Catalog link to access
the Search Catalog
page.
Manage Favorites
PV_REQ_ITEM_MAI
NT
Search or browse the
item catalog for items
to add to your
favorites.
Delete an item from
your favorites list.
eProcurement,
eProcurement
Homepage
Click the Create
Requisition link, and
then click the Favorite
Items link to access the
Favorite Items page.
Click the Manage
Favorites button on the
Favorite Items page to
access the Manage
Favorites page.
Adding Items to Your Favorites List
Access the Requisition Summary page.
To add items to your favorites list:
1. Navigate to the Requisition Summary page.
2. Click the Search Catalog link to access the Search Catalog page.
3. Identify items that you want to add to your favorites list.
4. Click the Add To Favorites button to add each item.
5-2
USING FAVORITES
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
The system displays a message indicating that the item has been added to your favorites; the
item appears on your favorites list when you save the requisition. The next time you need to
order this item, just copy it from the favorites list.
Note. You can add an item to a current requisition and to the favorites list simultaneously.
Deleting Items From Your Favorites List
Access the Manage Favorites page.
Select the items that you want to delete.
Note. Items with an expired unavailability date on the Purchasing Attributes page or an
Inactive item status on the Define Item – General: Common page do not appear here.
The item’s status on the favorites list. Values are Active
and Inactive. An Inactive item is deleted from the
favorites list when you save the page.
Status
See Also
PeopleSoft Purchasing PeopleBook, Defining Purchasing Item Information,” Defining
Purchasing Item Attributes
PeopleSoft Managing Items PeopleBook, “Defining Items,” Defining General Item
Information
Adding Favorites to a Requisition
This section discusses how to:
•
Add favorite items to a requisition.
Pages Used to Add Favorites to a Requisition
Page
Object
Navigation
Usage
Requisition Summary
PV_REQ_FORM
eProcurement,
eProcurement
Homepage
Create or edit a saved
requisition that has not
been submitted for
approval.
Click the Create
Requisition link to
access the Requisition
Summary page.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING FAVORITES
5-3
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page
Object
Navigation
Usage
Favorite Items
PV_REQ_ITM_FAVS
eProcurement,
eProcurement
Homepage
Add a favorite item to
your requisition.
Click the Create
Requisition link, and
then click the Favorite
Items link to access the
Favorite Items page.
Adding Favorite Items to a Requisition
Access the Requisition Summary page.
To add favorite items to a requisition:
1. Navigate to the Requisition Summary page.
2. Click the Favorite Items link to access the Favorite Items page.
3. Identify items and item quantities to add to your requisition.
4. Click the Add Item button to add items to your requisition.
Items that you add to a requisition cart display at the top of the page.
5-4
USING FAVORITES
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CHAPTER 6
Using Item Templates
This chapter provides an overview of item templates and discusses how to:
•
Create item templates.
•
Use item templates to create requisitions.
Understanding Item Templates
You can reduce the time needed to enter requisitions by creating item templates, which
consists of groups of items that you frequently order together. During order entry, use the
templates to add these items to your requisition without searching the item catalog.
PeopleSoft eProcurement offers two types of templates:
Personal templates
Personal templates, which are created from frequently
used requisitions, are private—accessible only to the user
who creates them—and are stored under the user ID.
Company templates
Company templates are used throughout the company.
Only users with the correct authority can create or change
company templates, but all users in the PeopleSoft
Purchasing business unit have access to them. Company
templates are maintained in the administration area of
PeopleSoft eProcurement under Purchasing Kits.
Note. Item templates, which can include items from the standard item catalog or items from a
special request, are designed for groups of items; use favorites lists to save individual items.
See Also
“Using Favorites”
Common Elements Used in This Chapter
Template Name
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
Click the Template Name link on the Use Templates page
to access the Template Name page (Personal) or Template
Name page (Company), where you can view a complete
USING ITEM TEMPLATES
6-1
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
list of items in the template.
Creating Item Templates
This section discusses how to:
•
Create personal templates.
•
Delete personal and company templates.
Pages Used to Create Templates
Page
Object
Navigation
Usage
Requisition Summary
PV_REQ_FORM
eProcurement,
eProcurement
Homepage
Create or edit a saved
requisition that has not
been submitted for
approval.
Click the Create
Requisition link to
access the Requisition
Summary page.
Manage Templates
Delete a template.
PV_REQ_TEMP_MGR eProcurement,
eProcurement
Homepage
Click the Create
Requisition link to
access the Requisition
Summary page.
Note. The Manage
Template link appears
once you create an item
template.
Click the Item
Templates link on the
Requisition Summary
page, and then click the
Manage Personal
Template link on the
Use Template page.
See Also
Using Item Templates to Create Requisitions
Creating Personal Templates
Access the Requisition Summary page.
6-2
USING ITEM TEMPLATES
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
To create a personal template:
1. Open the Requisition Summary page.
Include all of the items that you want on the new template.
2. Enter the correct item quantity for the template.
Optionally, you can enter the shipping and cost distribution information.
3. Enter a template name in the Requisition Title field.
4. Select Mark As Template and save the requisition.
The next time you create a requisition, you can copy the items in this template to the
requisition.
Note. The items in a template are saved under a template name. Use this name when copying
items to a requisition.
See Also
“Creating Requisitions in PeopleSoft eProcurement,” Creating Requisitions
Deleting Personal and Company Templates
Access the Manage Templates page.
Note. You can delete your own personal templates; however, you can only delete company
templates if you have administration privileges.
Template Status
Indicates whether the template can be used. Values are
Active and Inactive.
Inactive: You can not use a template that has an inactive
status. Inactive templates are deleted from the favorites
list when you save the page.
Delete Template
Click to delete the template. The Template Status changes
to Inactive.
Undo Delete
Click to reactivate a template. You can reactivate a
template only before you save the page. Once you save
the page, the system removes the template from the
favorites list.
See Also
Adding a Template to a Requisition
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING ITEM TEMPLATES
6-3
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Using Item Templates to Create Requisitions
This section discusses how to:
•
Add a template to a requisition.
•
View company templates.
•
View personal templates.
Pages Used to Create Requisitions From Item Templates
Page
Object
Navigation
Usage
Use Templates
PV_REQ_TEMPLATE
S
eProcurement,
eProcurement
Homepage
Select an item template
to add to a requisition.
Click the Create
Requisition link to
access the Requisition
Summary page, and
then click the Item
Templates link to
access the Use
Templates page.
Template Name Company
PV_PURCH_KIT_SU
MM
eProcurement,
eProcurement
Homepage
Click the Create
Requisition link to
access the Requisition
Summary page, and
then click the Item
Templates link to
access the Use
Templates page.
View the items in a
company template and
add the template to a
requisition.
Click the linked name
of a company template
on the Use Templates
page.
6-4
USING ITEM TEMPLATES
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page
Object
Navigation
Usage
Template Name Personal
PV_REQ_TEMPL_SU
MM
eProcurement,
eProcurement
Homepage
View the items in a
personal template and
add the template to a
requisition.
Click the Create
Requisition link to
access the Requisition
Summary page, and
then click the Item
Templates link to
access the Use
Templates page.
Click the linked name
of a personal template
on the Use Templates
page.
Requisition Summary Item Description
PV_NEW_ITM_DESC
R
•
Click an item
description link on
the Template
Name page to
access the
Requisition
Summary – Item
Description page.
•
Click an item
description link on
the Requisition
Summary page to
access the
Requisition
Summary – Item
Description page.
Review details of an
item in a personal
template.
See Also
“Creating Requisitions in PeopleSoft eProcurement,” Creating Requisitions
Adding a Template to a Requisition
Access the Use Templates page.
This page lists all of your defined item templates. Add a template to your requisition.
Click to save your entries and return to the Requisition
Summary page.
Summary
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING ITEM TEMPLATES
6-5
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Company Templates
This group box displays all templates that have been created for use by the entire company.
Company templates are visible to all users.
Personal Templates
This group box displays all templates that you have created for your own use.
Manage Personal
Templates
Click to access the Manage Templates page, where you
can create, change, or delete item templates.
Note. You can only use one template for each requisition; however, you can add items to the
requisition or delete items from the template.
See Also
“Creating Requisitions in PeopleSoft eProcurement,” Creating Requisitions
Viewing Company Templates
Viewing Personal Templates
Viewing Company Templates
Access the Template Name page for a company template.
Use the fields and controls to review the template and add it to a requisition.
Use Template
Click to add the items in this template to your requisition
and return to the Requisition Summary page.
See Also
PeopleSoft Purchasing PeopleBook, Defining Purchasing Item Information,” Defining
Purchasing Item Attributes
Adding a Template to a Requisition
Viewing Personal Templates
Access the Template Name page for a personal template.
Review the template and add it to a requisition.
6-6
Requester
Individual who uses the template to create a requisition.
Use Template
Click to add the items in the template to your requisition.
USING ITEM TEMPLATES
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
Item Description
EPROCUREMENT
PEOPLEBOOK
Click to view detailed information about the item.
See Also
“Creating Requisitions in PeopleSoft eProcurement,” Reviewing Item Information and
Checking Price and Availability
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING ITEM TEMPLATES
6-7
CHAPTER 7
Using Special Requests
This chapter provides an overview of special requests and discusses how to:
•
Request special goods.
•
Request special services.
•
Search for and suggest a vendor for your special request.
Understanding Special Requests
To create a requisition for an item that is not included in the standard catalog of items in
PeopleSoft eProcurement and has no item ID, you can enter a special request. After you
submit the requisition, the special request item is routed for approval.
When you enter a special request in the Special Request component, specify the type of item
that you are requesting. This enables the system to tailor the fields to match your needs.
You can request two types of items:
Goods
Physical items.
Services
Tasks that are performed by outside agents (for example,
package delivery, temporary help, and repair work).
Note. If you know the PeopleSoft item ID, use the Search Catalog page to request the item.
See Also
“Creating Requisitions in PeopleSoft eProcurement,” Searching for Items
Common Elements Used in This Chapter
Add Item
Click to save your entries as a requisition line.
# of Units of Work (number
of units of work)
The time that is needed to complete service based on the
unit of work—for example, 2 hours, 6 days.
Beginning Date of Service
Enter the date that the service should be started. This date
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING SPECIAL REQUESTS
7-1
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
appears in the Line Comments sections on the requisition
and the purchase order.
Category
The item category to which this service belongs. This
category ID enables the system to retrieve default values
for the requisition and purchase order.
Date of Completion
The date that the services should be completed. This date
appears in the Due Date fields on the requisition and the
purchase order.
Description of Service
A brief description of the service that is needed (up to 254
characters). This description appears on the purchase
order that is sent to the vendor.
Quote Number
The number of the written quote, if any, that is provided
by the vendor. This number appears in the Line
Comments sections of the requisition and the purchase
order.
Quote Date
The date of the written quote from the vendor. This date
appears in the Line Comments sections on the requisition
and the purchase order.
Rate Per Unit of Work
The unit price for this service based on the unit of work.
Scope of Work
A detailed description of the service, including the vendor
item ID, if available. This description appears in the Line
Comments sections on the requisition and the purchase
order.
Unit of Work
The time-based unit of measure that is used for the service
that is provided—for example, hour, day.
Vendor Lookup
Click to access the Vendor Search page, where you can
search for and suggest a particular vendor. If you do not
name a vendor, the buyer can add one later.
Requesting Special Goods
This section discusses how to describe special request items and add them to a requisition.
7-2
USING SPECIAL REQUESTS
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Pages Used to Request Special Goods
Page
Object
Navigation
Usage
Special Request
PV_REQ_SR_WIZ_M
AIN
eProcurement, Create
Requisition
Choose between goods
and services.
Click the Special
Request link on the
Requisition Summary
page to access the
Special Request page.
Special Request Goods
PV_REQ_SR_GOOD
Select Good on the
Special Request page
and click Next.
Enter information
about the type of item
that you are requesting
and add it to a
requisition.
See Also
“Creating Requisitions in PeopleSoft eProcurement,” Creating Requisitions
Requesting Special Services
This section discusses how to:
•
Select the service type.
•
Request a fixed cost service.
•
Request a variable cost service.
•
Request materials.
Pages Used to Request Special Services
Page
Object
Navigation
Usage
Special Request Service
PV_REQ_SR_SV
eProcurement, Create
Requisition
Select the type of
service that you are
entering on the special
request form.
Click the Special
Request link on the
Requisition Summary
page to access the
Special Request page.
Select Service on the
Special Request page
and click Next.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING SPECIAL REQUESTS
7-3
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page
Object
Navigation
Usage
Special Request - Fixed
Cost Service
PV_REQ_SR_SVC_F
C
Select the Fixed Cost
option on the Special
Request - Service page
and click the Next
button.
Request a service that
is a fixed fee and is not
part of the standard
item catalog for
PeopleSoft
eProcurement.
Special Request Variable Cost
PV_REQ_SR_SVC_T
L
Select the Variable
Cost option on the
Special Request Service page, and click
the Next button.
Request a service that
is based on the number
of hours of work.
Special Request - Time
and Materials (Service
Information)
PV_REQ_SR_SVC_T
M1
Select the Time and
Materials option on the
Special Request Service page, and click
the Next button.
Request a service that
is not part of the
standard item catalog
for PeopleSoft
eProcurement.
Special Request - Time
and Materials
(Materials Information)
PV_REQ_SR_SVC_T
M2
On the Special Request
- Time and Materials
(Service Information)
page, click the Next
button.
Request materials.
Selecting the Service Type
Access the Special Request - Service page.
Fixed Cost
Select this option if the service is a one-time event for a
flat rate.
Variable Cost
Select this option if the service is a contractual agreement
based on the number of hours of work. For example, the
cost to hire temporary help is usually based on the hours
worked.
Time and Materials
Select this option if the service is a contractual agreement
based on the number of hours worked and the materials
used; for example, expenses that include parts and labor
for equipment repairs.
Requesting a Fixed Cost Service
Access the Special Request - Fixed Cost Service page.
Value of Services
7-4
USING SPECIAL REQUESTS
Enter the cost of this service. This amount is saved on the
requisition line with the quantity 1 and the unit of measure
Each.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
See Also
Searching for a Vendor
“Creating Requisitions in PeopleSoft eProcurement,” Creating Requisitions
Requesting a Variable Cost Service
Access the Special Request - Variable Cost Service page.
The number of hours on this page is an estimate. The total price is uncertain until the job is
complete. For example, the cost to hire temporary help is usually based on the hours worked.
Requesting Materials
Access the Special Request -Time and Materials (Materials Information) page.
Item Description
Describe the materials that are used. This description
appears on the purchase order that is sent to the vendor.
Unit of Measure
Enter the unit of measure that you entered in the
Requisition Price field, assuming a quantity of 1.
Detailed Description of
Project Materials
To help your purchasing department and the vendor
identify the agreed-upon costs, enter a more detailed
description of the materials used. If you know the vendor
item ID, enter it here. The text that you enter appears in
the Line Comments sections on the requisition and the
purchase order.
See Also
Searching for a Vendor
Searching for and Suggesting a Vendor
This section discusses how to:
•
Search for a vendor.
•
Suggest a vendor.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING SPECIAL REQUESTS
7-5
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Pages Used to Search for and Suggest a Vendor
Page
Object
Navigation
Usage
Vendor Search
PV_VNDR_LOOKUP
_WRK
eProcurement, Create
Requisition
Find a vendor for your
requisition line.
Click the Special
Request link on the
Requisition Summary
page to access the
Special Request page.
Select Good on the
Special Request page
and click Next to
access the Special
Request – Goods page.
Click the Vendor
Lookup link on the
Special Request Goods page to access
the Vendor Search
page.
Suggest a Vendor
PV_SUG_VNDR
Click the Suggest
Vendor link on the
Vendor Search page to
access the Suggest a
Vendor page.
Suggest a vendor who
is not in the standard
vendor catalog.
See Also
Requesting a Fixed Cost Service
Requesting a Variable Cost Service
Requesting Materials
Searching for a Vendor
Access the Vendor Search page.
Click the Select Vendor button to select and display the
selected vendor in the Vendor ID field on the Special
Request page.
Click the Vendor Details button to access the Vendor
Search Detail page.
Note. If you do not know the name of the vendor, you can leave the vendor field blank; the
sourcing processes will find the vendor name.
7-6
USING SPECIAL REQUESTS
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Suggesting a Vendor
Access the Suggest a Vendor page.
This vendor is attached to the requisition line that you create. The information that you enter
is used for all correspondence with this vendor.
After a suggested vendor is added to a requisition line, the
buyer sees the Suggested Vendor button on the
Requisition Expediter page for that line. The buyer can
reject the suggested vendor or add the new vendor to the
vendor catalog.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING SPECIAL REQUESTS
7-7
CHAPTER 8
Direct Connect Supplier Integration
This chapter provides an overview of supplier integration and discusses how to:
•
Set up for Direct Connect Supplier integration.
•
Associate item categories with returned values and edit supplier information.
•
Use Punchout for Direct Connect Supplier integration.
Understanding Direct Connect Supplier Integration
Use the Direct Connect feature to immediately connect to a supplier website by clicking the
supplier’s link, which appears on the Search Catalog page. The product or service items that
you choose are brought into an eProcurement requisition, which is processed through
PeopleSoft Workflow. The requisition is eventually converted to a purchase order, which is
routed to the supplier’s website. This integration enables you to access multiple vendor
catalogs in real-time, without any catalog maintenance on your part.
Direct Connect integration enables you to create configured orders for products or services
such as:
•
Computer systems with various types of processors, memory requirements, and
peripherals.
•
Printing jobs with varying text, colors, types and sizes of paper, numbers of copies,
and output formats.
•
Catered events with different locations, times, types of food, and levels of service.
PeopleSoft eProcurement supports Roundtrip and Punchout integration:
•
Roundtrip integration uses OCI (Open Catalog Interface) and xCBL to format the data
returned from the “shopping” session.
•
Punchout integration uses cXML (Commerce eXtensible Markup Language).
•
You can use Punchout integration to connect PeopleSoft eProcurement with
PeopleSoft eStore.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
DIRECT CONNECT SUPPLIER INTEGRATION
8-1
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Note. The Direct Connect Supplier feature requires some setup by your organization. The
steps for entering an order with a direct connect supplier vary according to the supplier and
your setup. Because Direct Connect order processing involves integration with another
website, the PeopleSoft eProcurement change request feature might not be available for
purchase orders that are created in this manner.
See Also
PeopleSoft PeopleTools PeopleBook: Integration Tools and Utilities, “File Layouts and Data
Interchange”
Setting Up Direct Connect Supplier Integration
This section discusses how to:
•
Contact direct connect suppliers for authentication data.
•
Add the PeopleSoft vendor definition.
•
Set up third party vendors.
•
Set up the merchant profile component.
•
Synchronize shared data to prevent validation errors.
Pages Used to Setup Direct Connect Supplier Integration
Page Name
Object Name
Navigation
Usage
Merchant Profile
MERCHANTID
eProcurement,
Procurement
Application
Administration
Enter basic information
about each merchant.
Click the Maintain
Merchant Integration
link.
Click the Merchant
profile link to access
the Merchant Profile
page.
8-2
DIRECT CONNECT SUPPLIER INTEGRATION
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
Merchant
Authentication
MERCHANTAUTH
eProcurement,
Procurement
Application
Administration
Maintain information
that your application
uses to sign on to the
merchant's Web site.
Click the Maintain
Merchant Integration
link.
Click the Merchant
profile link to access
the Merchant Profile –
Merchant
Authentication page.
Merchant BI Overrides
MERCHANTBIPARM
S
eProcurement,
Procurement
Application
Administration
Click the Maintain
Merchant Integration
link.
Click the Merchant
Profile link to access
the Merchant profile –
Merchant BI Overrides
page.
Merchant Category
MERCHANTCAT
eProcurement,
Procurement
Application
Administration
Specify which business
interlinks to use for the
current MIP, and enter
settings which will
temporarily override
selected default
settings of any
specified business
interlink.
Group merchant items
and store them in item
categories.
Click the Maintain
Merchant Integration
link.
Click the Merchant
Profile link to access
the Merchant profile –
Merchant Category
page.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
DIRECT CONNECT SUPPLIER INTEGRATION
8-3
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
Application Attributes
MERCHANTAPPATT
RS
eProcurement,
Procurement
Application
Administration
Store information
relating to your MIP.
Click the Maintain
Merchant Integration
link.
Click the Merchant
Profile link to access
the Merchant profile –
Application Attributes
page.
Contacting the Supplier for Authentication Data
The following steps describe the setup for Direct Connect suppliers:
1. The supplier creates a domain for your organization.
2. The supplier gives your organization the URL to link to the website from a PeopleSoft
eProcurement requisition.
3. The organization administrator and the supplier establish an organization-wide password
(shared secret) that authenticates your Extensible Markup Language (XML) messages
from PeopleSoft eProcurement.
Adding the PeopleSoft Vendor Definition
Before you save an order on a PeopleSoft eProcurement requisition, you must first establish
the supplier as a PeopleSoft vendor. Once you set up this connection, the vendor ID is saved
on the requisition line, and this supplier is listed as the vendor on the purchase order.
See Also
PeopleSoft Setting Up Procurement Options PeopleBook, “Maintaining Vendor Information,”
Entering Vendor Information
Setting Up Third Party Vendors
If the vendor is a third party, and you are using a direct connect suppliers as a broker for
orders, you establish the supplier and all third-party suppliers as PeopleSoft vendors. When
you create a PeopleSoft eProcurement requisition, the vendor on the requisition line is
identified by the direct connect supplier’s name, but a third-party vendor does the work.
When the requester accepts a quote from the third-party vendor, PeopleSoft uses the vendor
ID for the direct connect supplier. Before the purchase order creates a voucher in PeopleSoft
8-4
DIRECT CONNECT SUPPLIER INTEGRATION
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Payables, you must change the vendor information by adding the third party’s vendor ID as
the remitting vendor.
The following steps describe the setup of vendor definitions for suppliers who use third-party
vendors:
1. Set up the direct connect supplier as a PeopleSoft vendor, using the Maintain Vendor
page.
2. Set up each third-party vendor as a PeopleSoft vendor.
The requisition uses the direct connect supplier as the vendor ID.
3. On the Vendor Locations, add the third party’s vendor ID as the remitting vendor.
4. On the Application Attributes page, specify the required attributes for the direct connect
supplier.
See Also
PeopleSoft Setting Up Procurement Options PeopleBook, “Maintaining Vendor Information,”
Entering Vendor Information
Setting Up the Merchant Profile Component
A merchant profile enables transmissions to another internet site. Each Direct Connect
Supplier requires a merchant profiled to be created. You specify the following information in
the Merchant Profile component to establish a link between a Direct Connect Supplier and
PeopleSoft eProcurement.
Merchant Profile Page
For a merchant to be considered an integrated merchant (that is, a Direct Connect Supplier)
with a link from PeopleSoft eProcurement to the supplier’s website, the following criteria
must be met on the Merchant Profile page:
•
The Merchant Enabled check box is selected.
•
The effective date is not a future date.
•
The Object Owner Identifier is eProcurement.
Merchant Categories Page
Select the Merchant Category that is to be used when the direct merchant website creates a
requisition line for a PeopleSoft eProcurement requisition.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
DIRECT CONNECT SUPPLIER INTEGRATION
8-5
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Application Attributes Page
For Punchout integration, set up the attributes shown in the table below. Roundtrip requires
that the first four attributes be defined. These attributes identify the merchant as a PeopleSoft
vendor when the requisition line is created:
•
VENDOR_SETID
•
VENDOR_ID
•
VNDR_LOC
•
CATEGORY_ID
Attribute Name
Attribute Value
VENDOR_SETID
Define the static setID to use as the vendor ID.
VENDOR_ID
Define the vendor ID that is assigned to this merchant in
PeopleSoft.
VNDR_LOC
Define the vendor location number that provides the
default vendor address and other default information for
the requisition line.
CATEGORY_ID
Enter the default item category that is to be used on the
requisition line. This is the category where the item
appears when the user browses for items.
XML_SCHEMA
Enter CXML1.0. (For Punchout only.)
CXML_TO_DOMAIN
Define the domain that is used for the
CXML_TO_IDENTITY field. (For Punchout only.)
CXML_TO_IDENTITY
Define the identification that is used for the element. (For
Punchout only.)
DISPATCH_SHIPTO
Select from the list. Values are:
H: Merchant accepts the shipping information on the
XML header.
L: Merchant accepts the shipping information on each
line.
Synchronizing Shared Data to Prevent Validation Errors
To prevent validation errors when requisition information is passed between PeopleSoft
eProcurement and the direct connect supplier’s website, the common control data should use
the same codes, as shown in the following table.
8-6
Control Data
Standard Used by cXML
Units of measure
UN/CEFACT
Currency codes
ISO 4127
DIRECT CONNECT SUPPLIER INTEGRATION
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
Control Data
Standard Used by cXML
Country codes
ISO 3166
Language codes
ISO 639
EPROCUREMENT
PEOPLEBOOK
Associating Item Categories With Returned Values and Editing
Merchant Information for Direct Connect Suppliers
The Direct Connect Supplier feature uses a variety of item classification schemes. For
example, a direct connect supplier might return a UNSPSC code with each item that the
supplier sends to PeopleSoft eProcurement. When a supplier returns the classification code to
eProcurement, you convert that code to the item categories that you have set up.
Following are two ways to set up the relationship between the Direct Connect item
classification value and the PeopleSoft item categories that you use:
•
When creating an item category, set the Category Code field to equal the classification
value that you want to associate with that item’s category.
•
Use the Merchant Value Cross-Reference page to associate the item categories with
each direct connect supplier’s values.
For example, many suppliers return a UNSPSC code to eProcurement. When you create item
categories, we recommend that you set the category code for each category to equal the
corresponding UNSPSC code. If that isn’t feasible, use the Merchant Value Cross-Reference
page to associate one or more UNSPSC codes with an item category.
For Punchout suppliers, PeopleSoft eProcurement uses the following method to find an item
category, based on what the supplier returns in the <Classification> tag for each item.
PeopleSoft eProcurement compares the category code (CATEGORY_CD) that is associated
with each item category (CATEGORY_ID) to the value that the supplier returns in the
<Classification> tag.
•
If eProcurement finds a match, it places that item category for the matched item on the
requisition line (REQ_LINE.CATEGORY_ID) for that item.
•
If eProcurement cannot find a match, it looks at the Merchant Value CrossReferences.
Вѓ If it finds a merchant value in the cross-reference, then the Item Category that is
associated with that value is placed on the requisition line for that item.
Вѓ If e Procurement does not find a match, then the CATEGORY_ID that is
associated with the supplier in the Merchant Profile component is placed on the
requisition line for that item.
In this section, we discuss how to:
•
Associate item categories with returned values.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
DIRECT CONNECT SUPPLIER INTEGRATION
8-7
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Pages Used to Associate Item Categories With Returned Values and Edit
Merchant Information
Page Name
Object Name
Navigation
Usage
Merchant Value CrossReference
PV_MERCHANT_XR
EF
eProcurement,
Procurement
Application
Administration
Associate item
categories with
returned values by
creating a crossreference between the
item categories and the
values that are returned
by Punchout
merchants.
Click the Maintain
Merchant Integration
link.
Click the Merchant
Value Cross-Reference
link to access the
Merchant Value CrossReference page.
Maintain Merchant
Integration page.
Merchant Search
Information
PV_MERCHANT_INF
O
eProcurement,
Procurement
Application
Administration
Click the Maintain
Merchant Integration
link.
Click the Merchant
Search Information
link to access the
Merchant Search
Information page.
Find information about
the direct connect
suppliers in your
system and edit their
effective dates and
keywords.
Access is limited to
users with the
eProcurement Action
Role of
System_Admin.
Select the field name
for which you want to
create a crossreference.
Associating Item Categories With Returned Values
Access the Merchant Value Cross-Reference page.
8-8
PeopleSoft Value
Enter the value that is to cross-reference to the merchant
value.
Merchant Value
Enter the value that is associated with the value that you
have entered in this field.
DIRECT CONNECT SUPPLIER INTEGRATION
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Using Punchout for Direct Connect Supplier Integration
This section discusses how to create a PeopleSoft eProcurement requisition using Punchout.
Process Flow for Direct Connect Supplier Integration Using Punchout
Following is the process flow of the integration between PeopleSoft eProcurement and a direct
connect supplier, using Punchout.
PeopleSoft
eProcurement
Internet
Direct Supplier
User signs into
PeopleSoft
eProcurement
User creates new
requisition
Chooses catalog to
browse
PunchoutSetup
Request/Response
Message
User validated and
signed into Direct
Merchant website
User shops normally
and creates quote
User data and quote
data sent back to
Procurement
application
Punchout Order
Message
User checksout from
Direct Merchant
Order
Request/Response
Quote is converted to
order
Purchase requisition
saved
Manager approves the
requisition and a
purchase order is
created
Process flow using Punchout
Warning! PeopleSoft and/or Direct Connect Supplier may have site timeouts that cause the
user to lose unsaved state information.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
DIRECT CONNECT SUPPLIER INTEGRATION
8-9
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Creating a PeopleSoft eProcurement Requisition Using Punchout
The following table describes the steps for using Punchout to create an eProcurement
requisition. The Punchout messages reference cXML documents.
System
Steps
PeopleSoft
1.
A PeopleSoft user adds a new requisition or updates an existing requisition,
and then browses a list of suppliers.
2.
The user clicks the Direct Merchant link.
If this is an existing requisition line, the system checks PV_REQ_LN_XREF to
determine if the requisition has been integrated with an external item. If it has, the
SupplierPartID and SupplierPartAuxiliaryID are sent in the cXML message. The
System also checks the SupplierPartAuxiliaryID and determines the appropriate
operation attribute value.
The PunchoutSetupRequest message is generated in cXML and posted to the
Direct Connect Supplier that is using the business interlink PV_CXML_POSR.
This message, which includes the company ID, company authentication token, user
ID email address, and PeopleSoft URL, is sent to the URL from the Merchant
Website URL field on the Merchant Profile - Merchant Authentication page.
Direct
Connect
Supplier
Direct Connect Supplier receives and processes the PunchoutSetupRequest
message, including verifying the company ID, company authentication token, and
URL.
PeopleSoft
PeopleSoft eProcurement receives the PunchoutSetupResponse message from the
Direct Connect Supplier and uses the output from the business interlink
PV_CXML_POSR to extract relevant response data. The user is redirected to the
supplier’s URL.
Direct
Connect
Supplier
The request is entered on the supplier’s website. Upon checkout, the user can save
the entry as a quote or submit it as a request. If the user submits the request, the
supplier formats the PunchoutOrderMessage and redirects it to the PeopleSoft
URL.
PeopleSoft
PeopleSoft eProcurement receives the PunchoutOrderMessage from the Direct
Connect Supplier. Using the business interlink IMPORTXML_PV_POOM,
PeopleSoft eProcurement extracts the relevant data and either adds it as a new
requisition line or updates an existing requisition line.
PeopleSoft updates the cross-reference table (PS_PV_REQ_LN_XREF) with
Requisition Keys, Supplier ID, and Supplier Auxiliary ID. If the requisition line is
later deleted in PeopleSoft, the corresponding row in the cross-reference table is
also deleted.
PeopleSoft
The status of the requisition changes from Open to Pending Approval and is
selected for workflow approval routing and processing. If the requisition is
approved, a purchase order is created from the requisition.
When the purchase order is dispatched, the business interlink PV_CXML_ORDER
generates the OrderRequest message.
Direct
Connect
Supplier
8-10
Direct Connect Supplier receives the OrderRequest message and responds with the
OrderResponse message.
DIRECT CONNECT SUPPLIER INTEGRATION
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Note. Items that are selected at a supplier’s website are not transmitted to PeopleSoft
eProcurement unless the connection is initiated through the supplier’s link in eProcurement.
See Also
PeopleSoft Enterprise Integration PeopleBook, ”Introducing Enterprise Integration Points,”
Understanding the EIP Catalog
Setting Up Direct Connect Integration
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
DIRECT CONNECT SUPPLIER INTEGRATION
8-11
CHAPTER 9
Creating Express Forms
This chapter provides an overview of express forms and discuss how to:
•
Create express forms.
•
Creating business card express orders for requisitions.
Understanding Express Forms
Express Forms enable you to use a standardized form to order products that might need
additional supporting information by simply adding a table. You can alter express forms so
that they are appropriate for specific purposes and incorporate effective dating. You can use
inquiry versions of your forms to display orders without allowing editing.
When the requester selects an express form for the requisition, a page appears where he can
enter additional information needed to order the item. The requester completes this page, and
the information is saved for the vendor.
Common Elements Used in This Chapter
Effective Date
Date this express form is available for users.
SetID
Item category’s setID.
Unit of Measure
Default unit of measure that should be used for this
requisition.
Creating Express Forms
This section discusses how to:
•
Create express form profiles.
•
Design express forms.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CREATING EXPRESS FORMS
9-1
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Used to Create Express Forms
Page Name
Object Name
Navigation
Usage
Maintain Express Form
Profile
PV_EXP_APP_PROFI
LE
eProcurement,
Procurement
Application
Administration
Link your
PeopleTools-designed
page to the PeopleSoft
eProcurement system
as an express form,
create multiple forms
for different uses and
effective dates, and
design pages, menus,
and components for
both editable and
inquiry-only versions
of your express forms.
Click the Maintain
Merchant Integration
link.
Click the Maintain
Express Form Profile
link to access the
Maintain Express Form
Profile page.
Creating Express Form Profiles
Access the Maintain Express Form Profiles page.
Note. All fields from Effective Date through Page Name are required. Also, more than one
express form can use the same page definition but not the same express form type.
Menu Name
Name of the menu definition that is used by the page that
you created. Use this field to link the requisition Search
Catalog page to the location of the express form.
Component Name
Name of the component where the express form is located.
Page Name
Name of the page that the express form uses.
Inquiry Menu Name
Name of the inquiry menu definition that is used by the
page that you created for Express Form inquiries. Use this
field to link the item description links to the location of
the Express Form inquiry.
Inquiry Component Name
Component where the page for express form inquiries is
located.
Inquiry Page Name
Name of the page used for express form inquiries.
Image Name
Image that you wish to display on the requisition Search
Catalog page for this express form.
Note. Use the inquiry or display-only version of your express forms to allow users and
vendors to view orders without editing them.
You can also enter search terms and a description that helps users find the express form during
searches of the catalog.
9-2
CREATING EXPRESS FORMS
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
See Also
“Creating Requisitions in PeopleSoft eProcurement,” Searching and Browsing for Items
Designing Express Forms
To design an express form:
1. Create a record definition in PeopleTools with all the fields that you want on your express
form.
This record definition must include the fields PV_EASYFORM_TYPE and
PV_EASYFORM_ID as keys.
2. Use a sub-panel with the required fields to enter a requisition; it is attached to your record
definition from step 1.
Enter a default value for these required fields to be used if the requester does not enter a
different value.
3. Build the SQL table from the record definition.
4. Create the page definition.
This page defines the fields and layout of the Express Form itself. Enter all fields that you
want the user to be able to complete. Be sure to include quantity and amount fields.
5. Copy the page that you just created and save it as an inquiry page.
The sample business card express form uses PV_EF_BUSCARD_INQ. This provides a
display-only page for your express form, so that it can only be edited by appropriate users
and at appropriate points in the procurement process.
6. Define the component definition.
The sample business card Express Form uses PV_EF_BUSCARD.
7. Copy the page that you created and save it as an inquiry component.
8. Add the two components to an existing Menu Definition.
The sample business card Express Form uses the menu name PV_MAIN_MENU.
9. Add the Express Form Profile page for this express form.
10. Enable menu security using permission list, roles, and user profiles.
11. Test your new express form to ensure online functionality and data integrity by adding
data to the express form, confirming default values, and prompt lists.
The ChartField should appear as a default from the setup in step 2. The account usually
comes from the item category definition.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CREATING EXPRESS FORMS
9-3
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
See Also
Creating Express Forms Profiles
PeopleSoft Application Fundamentals for FIN, ESA, SCM, “Defining User Preferences”
Defining Overall User Preferences
PeopleSoft Application Fundamentals for FIN, ESA, SCM, “Defining and Using ChartFields”
PeopleSoft Maintaining Items PeopleBook, “Defining Item Control Values”
PeopleSoft PeopleTools PeopleBook: Security, “User Profiles”
PeopleSoft PeopleTools PeopleBook: Security, “Understanding PeopleSoft Security,” Roles
PeopleSoft PeopleTools PeopleBook: Security, “Understanding PeopleSoft Security,”
Permission Lists
PeopleSoft PeopleTools PeopleBook: Application Designer, “Using PeopleSoft Application
Designer,” Creating SQL Tables
PeopleSoft PeopleTools PeopleBook: Application Designer, “Creating Component
Definitions,” Defining Components
PeopleSoft PeopleTools PeopleBook: Application Designer, “Building SQL Tables and
Views”
PeopleSoft PeopleTools PeopleBook: Application Designer, “Creating Page Definitions”
PeopleSoft PeopleTools PeopleBook: Application Designer, “Creating Record Definitions”
Creating Business Card Express Orders for Requisitions
Once you have set up express forms, your requesters can use them directly on the requisition.
The Business Card Express Form page is an example of an express form. Design and edit
your express forms to your own specifications.
This section discusses how to enter data for business card orders.
See Also
Creating Express Forms
9-4
CREATING EXPRESS FORMS
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Pages Used to Create Business Card Express Orders for Requisitions
Page Name
Object Name
Navigation
Usage
Business Card Express
Form
PV_EF_BUSCARD
eProcurement, Create
Requisition
Enter data for business
card orders.
Click the Search
Catalog link to access
the Search Catalog
page.
Search or browse for
“Business Cards” on
the Search Catalog
page.
Inquire Business Cards
PV_EF_BUSCARD_I
NQ
eProcurement,
Procurement
Application
Administration
View business cards
ordered with the
Business Card Express
Forms page.
Click the Maintain
Merchant Integration
link.
Click the Inquire
Business Cards link to
access the Inquire
Business Cards page.
Entering Data for Business Card Orders
Access the Business Card Express Form page.
To use the Business Card Express Forms page:
1. Enter your data in the editable fields on this page.
The fields marked with an asterisk (*) are required.
2. Click OK to save your request and go to the Requisition Summary page.
3. After you’ve added Business Cards to your requisition, view your order by clicking the
linked Item Description on the Requisition Summary page.
See Also
“Creating Requisitions in PeopleSoft eProcurement,” Creating Requisitions
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CREATING EXPRESS FORMS
9-5
CHAPTER 10
Using MarketPlace with PeopleSoft
eProcurement
This chapter provides an overview of the integration between Commerce One MarketPlace
and PeopleSoft eProcurement, and discusses how to:
•
Integrate MarketPlace with eProcurement.
•
Load MarketPlace catalog items into eProcurement.
•
Use price and availability checks.
•
Send PeopleSoft eProcurement purchase orders to MarketPlace.
Understanding the Integration Between MarketPlace and PeopleSoft
eProcurement
A MarketPlace is an electronic trading community in which buyers and sellers use a common
internet portal. Integrating your PeopleSoft eProcurement system with a MarketPlace based
on Commerce Once MarketPlace, “MarketPlace” enables you to review the latest supplier
catalogs and prices in MarketPlace, and then download these catalogs into eProcurement.
Once you connect MarketPlace and eProcurement, your users can perform the following
functions:
•
Load or update items from MarketPlace catalogs into eProcurement catalogs and use
these items on eProcurement requisitions and purchase orders.
•
Pass purchase orders created in PeopleSoft eProcurement to MarketPlace where
suppliers receive the orders and review them.
•
Pass the supplier’s response to your purchase order from MarketPlace to
eProcurement.
In MarketPlace, the supplier responds by accepting or rejecting the purchase order. This
response is passed to PeopleSoft eProcurement where it is inserted in the PO Dispatch
Message Log page. The status of the PO in eProcurement changes to Dispatched.
•
Use the price check feature in PeopleSoft eProcurement to update an item’s price to
match the current price in MarketPlace.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING MARKETPLACE
WITH
PEOPLESOFT
EPROCUREMENT
10-1
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Users receive the latest price for an item. This is especially important when prices
fluctuate frequently.
•
Use the availability check feature in PeopleSoft eProcurement to update an item’s
available quantity to match the supplier’s available quantity in MarketPlace.
Users know before submitting an order whether stock is currently available.
•
Use the order status feature in PeopleSoft eProcurement to request the current status
of the purchase orders they submit to MarketPlace.
Loading MarketPlace Items into PeopleSoft eProcurement
Once you have set up your connections to MarketPlace, you can load items from the
MarketPlace catalogs into PeopleSoft eProcurement. These MarketPlace items can be entered
on eProcurement requisitions and purchase orders. You can also update prices and check
available quantity for MarketPlace items in PeopleSoft eProcurement. After you have loaded
the items, you should schedule regular updates to capture changes such as price fluctuations,
discontinuation of items, or addition of new items.
The following diagram illustrates the process of loading MarketPlace items into PeopleSoft
eProcurement.
10-2
USING MARKETPLACE
WITH
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
CUP File in Microsoft
Access
MarketSite
eProcurement tables:
PV_CP_LOAD
PV_CP_CAT_TMP
PV_CP_ITM_XREF
Validate data using the
pages:
Edit CUP Item Categories
CUP Item Status
CUP Item Categories
Production tables:
MASTER_ITEM_TBL
INV_ITEMS
INV_ITEMS_UOM
BU_ITEMS_INV
BU_ITEMS_WTVOL
PURCH_ITEM_ATTR
ITM_VENDOR
ITEM_VENDOR_LOC
ITM_VNDR_UOM
ITM_VNDR_UOM_PR
CM_ITEM_METHOD
ITEM_MFG
MANUFACTURER
UOM_TYPE_INV
BU_ITEM_UTIL_CD
BU_ITEMS_CONFIG
PL_ITEM_ATTRIB
ITM_CAT_TBL
EN_REVISION
EPROCUREMENT
PEOPLEBOOK
Export CUP Data
process
three flat files:
y
product file
y
price file
y
attachment file
Import CUP File
process
PO Item Staging tables:
ITM_LOAD_MST_EC
ITM_LOAD_INV_EC
ITM_LOAD_PUR_EC
ITM_LOAD_VND_EC
Load MarketPlace
Items process
Item Loader
process
Load Item Stage
process
launched by
Load MarketPlace Items
process
launched by
Load MarketPlace Items
process
Process to load MarketPlace items to PeopleSoft eProcurement
Prerequisites
Before integrating MarketPlace with eProcurement, all MarketPlace suppliers to be used in
eProcurement must be set up as PeopleSoft eProcurement vendors.
Common Elements Used in This Chapter
Item SetID
The setID that should be used when these items are added
to the PeopleSoft Item Master table.
SetID
The setID associated with the vendor that you are linking
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING MARKETPLACE
WITH
PEOPLESOFT
EPROCUREMENT
10-3
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
to the MarketPlace supplier.
The supplier ID in MarketPlace.
Supplier ID
Integrating MarketPlace with PeopleSoft eProcurement
This section discusses how to:
•
Set up the connection to MarketPlace.
•
Set up MarketPlace suppliers.
•
Set up MarketPlace buyers.
•
Determine setIDs defined as MarketPlace buyers.
Pages Used to Integrate MarketPlace with PeopleSoft eProcurement
Page Name
Object Name
Navigation
Usage
Linked Supplier Setup
PV_MS_SEC_SUPPLI
ER
eProcurement,
Procurement
Application
Administration
Link MarketPlace
suppliers to PeopleSoft
vendors.
Click the Maintain
Merchant Integration
link.
Click the Linked
Suppliers link to access
the Linked Supplier
Setup page.
MarketPlace Buyer
Setup
PV_MS_SEC_BUYER
eProcurement,
Procurement
Application
Administration
Click the Maintain
Merchant Integration
link.
Connect PeopleSoft
eProcurement to
MarketPlace so that
purchase orders,
responses, and other
information can be
exchanged.
Click the MarketPlace
Buyers link to access
the MarketPlace Buyer
Setup page.
10-4
USING MARKETPLACE
WITH
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
MarketPlace Buyer
Options
PV_MS_BUYER_OPT
eProcurement,
Procurement
Application
Administration
Test your connection
and view transmission
logs between
PeopleSoft
eProcurement and
MarketPlace. Test the
sending and receiving
of information
including: purchase
orders, price checks,
availability checks, and
order status checks.
Click the Maintain
Merchant Integration
link.
Click the MarketPlace
Buyers link to access
the MarketPlace Buyer
Setup – MarketPlace
Buyer Options page.
Setting Up the Connection To MarketPlace
To set up the connection between PeopleSoft eProcurement and MarketPlace:
1. Set up the Application Message Gateway nodes and note the address.
When a supplier accepts or rejects a purchase order through MarketPlace, the system posts
an XML document to PeopleSoft eProcurement. The system then changes the purchase
order’s status to Dispatched; and inserts the supplier’s response in the PO Dispatch
Message Log page. If the supplier rejects the order, you must cancel the original PO and
create a new one.
2. Add MarketPlace suppliers as PeopleSoft vendors, using the Vendor Information
component.
3. Set up MarketPlace suppliers as eProcurement vendors, using the MarketPlace Supplier
Setup page.
4. Use the MarketPlace Buyers - Buyer Setup page to link the setID used in the PeopleSoft
eProcurement record group as a buyer in MarketPlace, and enter the internet address of
the Application Message Gateway node on this page.
Note. All transactions for PeopleSoft eProcurement are stored within business units.
These business units are linked to the record group eProcurement (PV_01) using a setID
on the Table Control - Record Group page. In order to pass transactions to MarketPlace,
the setIDs used must be defined as a MarketPlace buyer using the MarketPlace Buyers Buyer Setup page.
5. Synchronize shared data that is transferred between PeopleSoft eProcurement and
MarketPlace.
To prevent validation errors during the transfer of data between PeopleSoft eProcurement
and MarketPlace, ensure that common control data is identified by the same codes. This
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING MARKETPLACE
WITH
PEOPLESOFT
EPROCUREMENT
10-5
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
common data includes units of measure, currency codes, country codes, language codes,
and so on.
See Also
PeopleSoft Setting Up Procurement Options PeopleBook, “Maintaining Vendor Information,”
Entering Vendor Information
PeopleSoft Enterprise Integration PeopleBook, “Introducing the Effective-Date Publish
Utility,” Defining the Message Node, Message Channel, and Message Definition
Setting Up MarketPlace Buyers
Setting Up Market Place Suppliers
Setting Up MarketPlace Suppliers
Access the Linked Supplier Setup page.
Supplier Participant ID
A 64-bit universally unique identifier assigned to every
MarketPlace trading partner. (A trading partner is a buyer
or seller in MarketPlace). Supplier participant ID’s are
defined within MarketPlace and cannot be changed.
These ID’s are used to identify the supplier of an item
when transferring information between MarketPlace and
eProcurement. This is a required field.
Buyer Account Code
The code used by the MarketPlace supplier to identify the
buyer (PeopleSoft eProcurement).
Setting up MarketPlace Buyers
Access the MarketPlace Buyer Setup page.
Define a MarketPlace buyer for each setID used to link a business unit to the PeopleSoft
eProcurement record group PV_01.
10-6
MarketPlace URL
The MarketPlace Internet address used by PeopleSoft
eProcurement to pass XML documents including;
purchase orders, order status checks, and price and
availability checks.
MarketSite Partner ID
A 64-bit identifier assigned to every MarketPlace
enterprise-level trading partner. Participant IDs are
defined by MarketPlace (or MarketSite) and cannot be
modified.
Buyer User ID
User ID that enables the trading partner to gain access to
MarketPlace. PeopleSoft eProcurement is a trading
partner with MarketPlace.
USING MARKETPLACE
WITH
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
The PeopleSoft gateway internet address to which
MarketPlace sends suppliers’ responses. Once these
responses (which are formatted as XML documents)
arrive at the PeopleSoft gateway, the system launches
PeopleCode to update PeopleSoft eProcurement.
Gateway URL
Access the MarketPlace Buyer Options tab.
Note. In order for the user to have read or write access to the log files, the log file location
must be accessible by the application server, process scheduler server, and the client. Write
access should be granted to the application server and the process scheduler server. The client
servers should have read access.
Log Files
To view a log file, select the type of log file that you want.
Values are:
File Type
Price Check: File generated when PeopleSoft
eProcurement users update an item’s price to match the
current price in MarketPlace. Launch this action by
clicking the Check Price and Availability button on the
Search Catalog - Item Description page. You can launch
this action using the Test MarketPlace Connectivity
section of this page.
Availability Check: File generated when PeopleSoft
eProcurement users compare the supplier’s available
quantity in MarketPlace to the requisition quantity. If the
quantity requested exceeds the available quantity, a
message appears giving the user an opportunity to change
the requisition quantity. Launch this action by clicking
the Check Price and Availability button on the Search
Catalog – Item Description page. You can launch this
action using the Test MarketPlace Connectivity section of
this page.
Order Status Check: File generated when PeopleSoft
eProcurement users request the current status of the
purchase orders they submitted to MarketPlace. Launch
this action by clicking the Get Market Order Status button
on the PO Dispatch Message Log page or selecting the
Run Order Status Check on the Process MarketPlace
Orders Process page. You can launch this action using the
Test MarketPlace Connectivity section of this page.
Purchase Order: The file generated when purchase orders
created in PeopleSoft eProcurement are transmitted to
MarketPlace. Users launch this action by running the
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING MARKETPLACE
WITH
PEOPLESOFT
EPROCUREMENT
10-7
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Process MarketPlace Orders Process page.
View Request
Select to review the log file generated when sending the
data transmission to MarketPlace. This XML data can be
used to help debug problems with transmitting data to
MarketPlace. The type of log file is based on your
selection in the File Type field. The system shows the last
transmission of this file type located in the directory
entered in the Log File Location field.
View Response
Select to review the log file generated when MarketPlace
sends a response to eProcurement. This XML data can be
used to help debug problems with transmitting data from
MarketPlace. The type of log file that appears is based on
your selection in the File Type field. The system shows
the last transmission of this file type located in the
directory entered in the Log File Location field. If you
select the file type Purchase Order, the log file does not
contain any information since the purchase order action is
an asynchronous transmission and no response is received
from MarketPlace.
Test MarketPlace Connectivity
Price
Select to launch a price check, which instantly updates an
item’s price to match the current price in MarketPlace.
The item entered in the Item ID field is used for this price
check. A transmission log is generated and stored in the
directory entered in the Log File Location field.
Availability
Select to launch an availability check, which retrieves the
supplier’s available quantity from MarketPlace. The item
entered in the Item ID field is used for this availability
check. A transmission log is generated and stored in the
directory entered in the Log File Location field.
Status
Select to launch an order status check, which retrieves the
current status of purchase orders within MarketPlace. The
PO entered in the Purchase Order field is used for this
order status check. A transmission log is generated and
stored in the directory entered in the Log File Location
field.
See Also
“Dispatching Purchase Orders in PeopleSoft eProcurement”
“Creating Requisitions in PeopleSoft eProcurement,” Creating Requisitions
10-8
USING MARKETPLACE
WITH
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Determining the SetIDs Defined as MarketPlace Buyers
The MarketPlace Buyers component enables you to define and test your connection to
MarketPlace. Your PeopleSoft eProcurement application is defined as a buyer within
MarketPlace, so that information can be exchanged.
The setID defines the MarketPlace buyer. If you have multiple business units for PeopleSoft
eProcurement, you might have multiple MarketPlace buyers.
To determine the setIDs that must be defined as a MarketPlace buyers:
1. Identify the Purchasing business units that are used to record PeopleSoft eProcurement
purchase orders that are passed to MarketPlace.
2. Access the Tableset Control - Record Group page.
In the Set Control Value field, enter in the business unit. On the Tableset Control Record Group page look up the setID used for the eProcurement record group. The record
group ID is PV_01.
3. Use the MarketPlace Buyers - Buyer Setup page to define a buyer for this setID.
See Also
PeopleSoft Purchasing PeopleBook, “Defining PeopleSoft Purchasing Business Units and
Processing Options,” Defining Purchasing Business Unit Options
Loading MarketPlace Catalog Items Into PeopleSoft eProcurement
This section discusses how to:
•
Extract data from the MarketSite CUP file.
•
Export CUP data.
•
Import CUP files.
•
Validate and process imported items.
•
Edit CUP item categories.
•
Use CUP item statuses.
•
Use CUP item categories.
•
Load MarketPlace items Into PeopleSoft item tables.
•
Load MarketPlace items.
•
Download item attachments.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING MARKETPLACE
WITH
PEOPLESOFT
EPROCUREMENT
10-9
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
To load MarketPlace catalog items into PeopleSoft eProcurement:
1. Download the supplier’s latest CUP (Catalog Update process) file from Commerce One’s
MarketSite, using the instructions on the MarketSite website.
The machine on which you run the Export CUP Data process must have Microsoft Data
Access Components installed.
2. Navigate to the ps_home\setup folder, and run the program mdac_typ.exe.
3. Install the Microsoft Data Access Components.
4. Extract and export information from the Microsoft Access database to flat files, using the
PeopleSoft eProcurement Export CUP Data process (PS_CUP_EXPORT.EXE).
Note. This process builds one to three flat files: a product file containing item
information; a price file containing pricing information, and an attachment file containing
a cross-reference to the item images and attachments.
5. Import the product and price files to PeopleSoft eProcurement, using the Import CUP File
process (PV_CP_IMPORT_RUN).
This Application Engine process loads the product and price flat files into the
PV_CP_LOAD and PV_CP_CAT_TMP staging tables. The attachment file is loaded into
the PV_CP_ITM_XREF table.
6. Use the Validate and Process Imported Items page to validate the CUP file data in the
staging tables, adding or changing information as necessary.
7. Use the Edit CUP Item Categories page Edit CUP Item Categories page to review any
new item categories added for the items loaded from MarketPlace.
Each new item category requires a default account (the top level of the PeopleSoft
ChartFields). This account is used to record the accounting entries created by ordering
items in this item category.
8. Review the CUP status of the item on the CUP Items Status page, and correct any errors.
9. Run the Load MarketPlace Items process (PV_CP_ITM_LOAD).
This process loads items with a status of Ready to Build Items (new items) or Already
Exists (update existing items) from the staging tables into the PeopleSoft item master
tables.
10. Use the Data Definition Maintenance page to review any errors for items that were not
loaded properly.
Select the ITEM transaction type and enter the setID for your items. Select the stage table
option with an Error status, then click the Query icon. Any errors appear at the bottom of
the page.
11. Go to the eProcurement Installation Options page once you have successfully loaded the
items.
10-10
USING MARKETPLACE
WITH
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
If the Catalog Search Type field is populated with FSE, run the Item Search Update
process. If the Catalog Search Type field is populated with VSE, run the Build Verify
Search Collection process (PV_SRCH_RUN_INDEX).
Note. When you select the search catalog method of FSE, a different index table is used
during requisition entry to search for all available items. By running the Item Search
Update process, you are updating this index table with your new items. It is important to
run this process whenever you add or change any items in PeopleSoft eProcurement.
See Also
PeopleSoft Third Party Applications PeopleBook, “Managing Supply Chain Management
Integration Points,” Using Data Definition Maintenance
“Using PeopleSoft eProcurement Administration,” Setting Up Installation Options and
Enabling Attachments
“Implementing Item Searches”
Editing CUP Item Categories
Exporting CUP Data
Importing Item Catalogs
Loading MarketPlace Items
Using CUP Item Statuses
Validating and Processing Imported Items
Pages Used to Load MarketPlace Catalog Items Into PeopleSoft
eProcurement
Page Name
Object Name
Navigation
Usage
Export CUP Data
PS_CUP_EXPORT
On a machine with
access to the process
scheduler server,
navigate to Start,
Programs, PeopleSoft
Applications, CUP
Item Export.
Extract information
from the MarketSite
CUP file (which
resides in the Microsoft
Access database) and
store this information
in flat files.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING MARKETPLACE
WITH
PEOPLESOFT
EPROCUREMENT
10-11
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
Import Item Catalogs
PV_CP_IMPORT_RU
N
eProcurement,
Procurement
Application
Administration
Load data from the flat
files created by the
Export CUP File
process into the
PeopleSoft
eProcurement tables.
Click the Maintain
Merchant Integration
link.
Click the Import Item
Catalog File link to
access the Import Item
Catalogs page.
Validate and Process
Imported Items
PV_CP_VALIDATE
eProcurement,
Procurement
Application
Administration
Click the Maintain
Merchant Integration
link.
Review and change the
item data loaded by the
Import CUP File
process page into the
staging tables
PV_CP_LOAD and
PV_CP_CAT_TMP.
Click the Validate and
Process Imported Items
link to access the
Validate and Process
Imported Items page.
Edit CUP Item
Categories
PV_CP_CATEGORIE
S
Review the new item
categories for the items
loaded from
MarketPlace.
eProcurement,
Procurement
Application
Administration
Click the Maintain
Merchant Integration
link.
Click the Validate and
Process Imported Items
link to access the
Validate and Process
Imported Items page.
Click the Categories
link on the Validate
and Process Imported
Items page to access
the Edit CUP Item
Categories page.
10-12
USING MARKETPLACE
WITH
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
Imported Item Status
PV_CP_STATUS
eProcurement,
Procurement
Application
Administration
View the load status
and details of the items
in the PV_CP_LOAD
and
PV_CP_CAT_TMP
staging tables, correct
errors, add more
details, and change the
item status.
Click the Maintain
Merchant Integration
link.
Click the Validate and
Process Imported Items
link to access the
Validate and Process
Imported Items page.
Click the View Items
link on the Validate
and Process Imported
Items page.
CUP Items Categories
PV_CP_STS_CAT_SB
P
View the UN/SPSC
codes for your items
and enter any missing
or incomplete
information.
eProcurement,
Procurement
Application
Administration
Click the Maintain
Merchant Integration
link.
Click the Validate and
Process Imported Items
link to access the
Validate and Process
Imported Items page.
Click the View Items
link on the Validate
and Process Imported
Items page.
Click the Categories
button on the Imported
Items Status page.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING MARKETPLACE
WITH
PEOPLESOFT
EPROCUREMENT
10-13
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
Load Staged Items
PV_CP_ITM_LOAD
eProcurement,
Procurement
Application
Administration
Load the data from the
PV_CP_LOAD and
PV_CP_CAT_TMP
staging tables to the
production tables for
PeopleSoft items.
Click the Maintain
Merchant Integration
link.
Click the Validate and
Process Imported Items
link to access the
Validate and Process
Imported Items page.
Click the Load Staged
Item button on the
Validate and Process
Imported Items page.
Extract Data From the MarketSite CUP File
The CUP file that you download from Commerce One’s MarketSite resides in a Microsoft
Access database. The Export CUP Data process (PS_CUP_EXPORT.EXE) uses SQL
statements to retrieve the necessary data from the Microsoft Access database. This process
builds three flat files—a product file containing item information, a price file containing
pricing information, and an attachment file containing information on each item’s attachments.
Not all data in the CUP file is retrieved; only the information needed by PeopleSoft. This
Visual Basic (VB) program is delivered with PeopleSoft eProcurement.
PeopleSoft retrieves the following information from the MarketSite CUP file:
Item Information (Product File)
10-14
Table
Field
Data Retrieved
Cup_CatUpdate
CreateDate
The item’s creation date.
Cup_SupplierPartnerID
The supplier’s identification code.
EffectiveDate
The item’s effective date.
Cup_Partner
TPName
The buyer’s trading partner
identification.
Cup_PartUpdate
Cup_PartUpdateID
The part update identification code.
ActionCode
The code identifying the action to be
performed on this item. The options
are: A (add a new item); D (delete an
item); or M (modify an existing
item).
PartNum
The item’s part number.
USING MARKETPLACE
WITH
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
Table
Cup_PartUpdateCommodity
Cup_PartUpdateDesc
Cup_PartUpdateInfo
Cup_Price
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
EPROCUREMENT
PEOPLEBOOK
Field
Data Retrieved
PartNumExt
The part number extension.
UOM
The unit of measure in which the
item is purchased.
CatLevel1, CatLevel2,
CatLevel3, and CatLevel4.
The description of the UN/SPSC
codes assigned to the item in the
AcctLevel1, AcctLevel2,
AcctLevel3, and AcctLevel4 fields.
The first 30 characters of this field
are used for the item category
description in the PeopleSoft table
ITM_CAT_TBL.
AcctLevel1, AcctLevel2,
AcctLevel3, and
AcctLevel4.
The four levels of UN/SPSC codes
for the item. These codes are used to
categorize the items within a catalog
(PeopleSoft tree). All four levels are
mandatory; if they are not already in
the CUP file, enter them manually on
the CUP Item Categories page.
ShortDesc
The short description for the item.
The value in this field is used to
populate several item description
fields in PeopleSoft’s item tables,
including DESCRSHORT (first 10
characters), DESCR (first 30
characters), DESCR60 (first 60
characters), and DESCR_254MIXED
(254 characters).
LongDesc
A longer description for the item that
is loaded into the PeopleSoft
eProcurement cross-reference table,
PV_CP_ITM_XREF. This
description appears on the Search
Catalog – Item Description page and
on the Requisition Summary – Item
Description page.
MfrPartNum
The manufacturer’s part number for
the item.
MfrName
The item manufacturer’s name.
LeadTime
The lead time required to deliver the
item.
UnitPrice
The item’s price per unit.
CurrencyCode
The currency in which the item’s
base price is expressed.
QtyMin
The minimum quantity of the item
that can be purchased.
USING MARKETPLACE
WITH
PEOPLESOFT
EPROCUREMENT
10-15
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Pricing Information (Price File)
Table
Field
Data Retrieved
Cup_CatUpdate
Cup_SupplierPartnerID
The supplier’s identification code.
Cup_Partner
TPName
The buyer’s trading partner
identification.
Cup_PartPrice
ActionCode
The action to be performed on this
item. The options are: A (add a new
item); D (delete an item); or M
(modify an existing item).
PartNum
The item’s part number.
PartNumExt
The part number’s extension.
UOM
The unit of measure in which the
item is purchased.
UnitPrice
The item’s price per unit.
CurrencyCode
The currency in which the item’s
base price is expressed.
EffectiveDate
The item’s effective date.
ExpireDate
The item price’s expiration date.
QtyMin
The minimum quantity of the item
that can be purchased.
Cup_Price
Note. The item’s long description is loaded from the CUP file into a cross-reference table
called PS_PV_CP_ITM_XREF, and the item’s image is loaded into a web server directory.
The description and image both appear when you view the item in PeopleSoft eProcurement.
See Also
Using CUP Items Categories
“Creating Requisition in PeopleSoft eProcurement,” Reviewing Item Information and
Checking Price and Availability
Exporting CUP Data
Access the Export CUP Data page.
Input Access Database (CUP File)
Input Access Database
(CUP File)
10-16
USING MARKETPLACE
WITH
PEOPLESOFT
Enter the directory path and file name of the CUP file that
you downloaded from MarketPlace.
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Output Text Files
Products
Enter the directory path and file name of the product file
that you want to create. This product file contains all
additions or changes to the item’s definition. Create this
file in a directory that is accessible to the process
scheduler server.
Prices
Enter the directory path and file name for the price file
that you want to create. The price file contains all changes
to the price of the item. If you are downloading items for
the first time, there aren’t any price updates and this file
does not exist. Create this file in a directory that is
accessible to the process scheduler server.
Attachments
Enter the directory path and file name of the attachment
file that you want to create. This file does not contain the
actual attachments (that is, images, blueprints, and so
forth), but only the file names and extensions of each
attachment. The actual attachments are downloaded in a
separate step. This attachment file cross-references the
names and extensions of each attachment to the
corresponding item ID. To create this file, you must have
an entry in the Products field. Create this file in a
directory that is accessible to the process scheduler server.
Export Data
Click to launch the Export CUP Data process.
Importing Item Catalogs
Access the Import Items Catalogs page.
Note. The product and price files are loaded into the staging tables PV_CP_LOAD and
PV_CP_CAT_TMP. This process adds certain defaults that were not in the MarketPlace
catalog tables to required fields in PeopleSoft’s Item tables. The attachment file is loaded into
the table PV_CP_ITM_XREF.
Import MarketPlace Items
Re-Process Cup Load
Errors
If any flat files contain errors that prevent them from
loading, select this check box to correct the errors and
reload the files.
Product File
Enter the location and name of the flat file containing the
item details. The product file must be accessible from the
process scheduler server.
Price File
Enter the file location and name of the flat file containing
the pricing details for the items. The price file must be
accessible from the process scheduler server.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING MARKETPLACE
WITH
PEOPLESOFT
EPROCUREMENT
10-17
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Tree
Enter the PeopleSoft tree (item catalog) to be used when
this process loads the new categories from the CUP file.
If you leave this field blank, the value defaults from the
eProcurement Installation Options page. To ensure that
this item catalog is accessible to the user creating
requisitions, either add the catalog to the Requester Setup
page or clear any catalog restrictions for the requestor.
Process Imported Items
After running the Import CUP File process, click to access
the Validate and Process Imported Items page to review
the item data loaded into the staging tables.
Note. Before running this process, verify your settings for requiring item approval. If you
select the Item Approval Required check box on the Installation Options - Overall/GL page,
all items that you load will require approval. If you are loading thousands of items, you might
not want to approve each item individually.
See Also
Validating and Processing Imported Items
“Using PeopleSoft eProcurement Administration,” Setting Up Installation Options and
Enabling Attachments
Validating and Processing Imported Items
Access the Validate and Process Imported Items page.
Note. This page is only accessible if the Import CUP File process has successfully loaded item
data.
See Also
Editing CUP Item Categories
Loading MarketPlace Items
Using CUP Item Statuses
Editing CUP Item Categories
Access the Edit CUP Item Categories page.
10-18
USING MARKETPLACE
WITH
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Note. These categories are created from the UN/SPSC codes downloaded from MarketSite.
Add an Account to each new category. The account is the top level of the ChartFields (chart
of accounts) used to create accounting entries in PeopleSoft. If the CUP file does not create
any new item categories, this page does not appear.
Copy
Click to copy the value in the Account field to every row
on this page.
Account
Enter the default account for this category. The account is
the top level of the PeopleSoft ChartField used to create
accounting entries in PeopleSoft. This is a required field.
See Also
PeopleSoft Application Fundamentals for FIN, ESA, SCM, “Defining and Using ChartFields”
PeopleSoft Setting Up Procurement Options PeopleBook, “Defining Procurement Options”
Using CUP Item Statuses
Access the CUP Item Status page.
The current load status of the items in the staging tables.
The drop-down list only displays a status if there are
currently items in that status. Values include:
Item Status
Invalid Unit of Measure: Select to display all items with
units of measure that are invalid in PeopleSoft
eProcurement.
Invalid or Missing Category: Select to display all items
that do not have a valid item category.
Invalid or Missing Supplier: Select to display all items
that do not include a valid supplier and vendor.
Item to be Updated: Select to display all items that have
been previously loaded into PeopleSoft eProcurement and
currently need to be updated with new item information.
Price to be Updated: Select to display all items that have
been previously loaded into PeopleSoft eProcurement and
currently need to be updated with new pricing
information.
Ready to Build Items: Select to display all items that are
ready to be loaded into the PeopleSoft item master tables.
Items to be Inactivated: Select to delete items from the
catalog.
Process Complete: Appears when the item has been
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING MARKETPLACE
WITH
PEOPLESOFT
EPROCUREMENT
10-19
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
entered successfully into the PeopleSoft production tables.
See Also
Using CUP Item Categories
Using CUP Item Categories
Access the CUP Items Categories page.
Note. The CUP Account Level codes are mandatory. You must have all four levels defined.
CUP Account Level 1, CUP
Account Level 2, CUP
Account Level 3, and CUP
Account Level 4
The four levels of UN/SPSC codes for the item. These
codes are used to categorize the items within a catalog
(PeopleSoft tree). If these codes are not already in the
CUP file, manually enter them here.
Description of UN/SPSC
codes
The description of the UN/SPSC codes. The first 30
characters of this field are used for the item category
description in the PeopleSoft table, ITM_CAT_TBL.
Loading MarketPlace Items Into PeopleSoft Item Tables
Use the Load MarketPlace Items page to load the data from the PV_CP_LOAD and
PV_CP_CAT_TMP staging tables to the production tables for PeopleSoft items.
The process of loading data includes four steps:
1. The Load MarketPlace Items process (PV_CP_ITM_LOAD) adds new item categories
and then loads MarketPlace CUP items into the PO item staging tables
(ITM_LOAD_MST_EC, ITM_LOAD_INV_EC, ITM_LOAD_PUR_EC, and
ITM_LOAD_VND_EC).
2. The Load Item Stage process (PO_ITMLOAD) transfers the data to the item loader
staging tables.
3. The Item Loader process (IN_ITMLOAD) transfers the data into the PeopleSoft
production tables.
4. The item status is updated on the CUP Item Status page.
The Load MarketPlace Items process also adds certain defaults that were not in the
MarketPlace catalog tables to the required fields of PeopleSoft’s item master tables. The
following information is hard coded into the Item Catalog tables:
10-20
Table Name
Field
Value Inserted
PS_ITM_CAT_TBL
CATEGORY_TYPE
PSF
DESCRSHORT
MKTPLACE
USING MARKETPLACE
WITH
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
Table Name
EPROCUREMENT
Field
Value Inserted
INSPECT_CD
N
INSPECT_UOM_TYPE
S
RECV_REQ
Y
RJCT_OVER_TOL_FLAG
N
REVC_PARTIAL_FLG
1
SRC_METHOD
B
PEOPLEBOOK
The following information is hard coded into the Item tables:
Table Name
Field
Value Inserted
PS_ITM_LOAD_PUR_EC
TAXABLE_CD
Y
INSPECT_CD
N
INSPECT_UOM_TYPE
V
RECV_REQ
Y
RJCT_OVER_TOL_FLAG
N
ACCEPT_ALL_VENDOR
N
ACCEPT_ALL_SHIPTO
Y
CONTRACT_REQ
N
RECV_PARTIAL_FLG
1
DESCRSHORT
MKTPLACE
SRC_METHOD
B
ACCEPT_ALL_UOM
Y
PRICE_DT_TYPE
L
PRICE_CAN_CHANGE
P
VNDR_CATALOG_ID
Y
PS_ITM_LOAD_VND_EC
See Also
Using CUP Items Statuses
Loading MarketPlace Items
Access the Load Staged Items page.
Run Item Load Process
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
Select to run the Load Item Stage process
(PO_ITMLOAD). If this option is not selected, only the
first step in this process will be completed. This process
USING MARKETPLACE
WITH
PEOPLESOFT
EPROCUREMENT
10-21
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
can be run separately using the Items Price List page. You
can choose to run this process separately in order to verify
or change data in the PO Item staging tables.
Run Inbound Items Process
Select to run the Item Loader process (IN_ITMLOAD).
This option is only available, if you select the Run Item
Load Process check box. This process can also be run
separately using the Item Loader page. You can choose to
run this process separately in order to verify or change
data in the Item Loader staging tables.
Note. If errors occur during the Item Loader process, use the Data Definition Maintenance
page.
See Also
Downloading Item Attachments
PeopleSoft Third Party Applications PeopleBook, “Managing Supply Chain Management
Integration Points,” Using Data Definition Maintenance
Downloading Item Attachments
Any item downloaded from Commerce One’s MarketSite could have an item image stored as
an attachment. You can download these attachments from MarketSite. The image of the item
appears on the Search Catalog - Item Description page and the Requisition Summary - Item
Description page.
To download item attachments from MarketSite into PeopleSoft eProcurement:
1. Run the Export CUP Data process to create the attachment file from the MarketSite CUP
file.
This file does not contain the actual attachments (item images), just the file names and
extensions of each attachment. The actual attachments are downloaded in a separate step.
This attachment file cross-references the names and extensions of each attachment to the
corresponding item ID.
Note. In order to create an attachment file from the Export CUP Data process, a product
file must be created at the same time from the same CUP file.
2. Run the Import CUP File process to move the data in the attachment file into the
eProcurement cross-reference table, PV_CP_ITM_XREF.
10-22
USING MARKETPLACE
WITH
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Note. Other attachments—aside from images—can be downloaded from Commerce
One’s MarketSite. Only attachments with a P (picture) type are loaded into the
eProcurement cross-reference table, PV_CP_ITM_XREF, when the Import CUP File
process runs. All other attachments are loaded into the PV_CP_ATTACH file for future
use.
3. Define the location where the item attachments should be stored using:
a.
The File Location page, which defines the first part of the directory and extension of
the attachments.
b.
The Load MarketPlace Items process, which defines the subdirectory.
For example, if the item attachments that you are downloading are GIF images, the File
Locations page defines the file extension (GIF) and the file directory F:\User\Images\. If
you enter MktPlc items in the Item Image Sub Directory field of the Load MarketPlace
Items page, the attachments with the extension GIF are stored in the directory:
F:\User\Imagesl\MktPlc items.
4. Download the zipped file containing the item attachments from MarketSite.
Place these item attachments in the directory location defined in step 3 above.
See Also
Exporting CUP Data
Loading MarketPlace Items
“Using PeopleSoft eProcurement Administration,” Setting Up Installation Options and
Enabling Attachments
Using Price and Availability Check
During requisition entry, you can update the price of an item with the most current price in
MarketPlace by clicking the Check Price and Availability button on the Requisition Summary
- Item Description page. If the supplier’s price in MarketPlace is the same as the price in the
item tables, there is no change to the page. If the supplier’s price is different, a message
appears which informs you that the price is changing to the supplier’s price. The Item
Description page then displays the MarketPlace price.
Check Price and Availability also compares the supplier’s available quantity in MarketPlace to
the requisition quantity. If the quantity requested exceeds the available quantity, a message
appears which provides the opportunity for you to change your requisition quantity.
Note. The Check Price and Availability button only appears if this is a MarketPlace item and
the user has been assigned the eProcurement Role Action of PRICEANDAVAILCHECK.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING MARKETPLACE
WITH
PEOPLESOFT
EPROCUREMENT
10-23
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
See Also
“Using PeopleSoft eProcurement Administration,” Attaching Role Actions to User Roles
Sending PeopleSoft eProcurement Purchase Orders to MarketPlace
When a user orders an item supplied by a MarketPlace vendor, the purchase order does not use
the standard Purchase Order Dispatcher process (PV_PO_DISPATCH). Instead, the PO is
sent to MarketPlace using the Process MarketPlace Orders process. The purchase order’s
status is Approved until the supplier goes into MarketPlace and responds to the order. When
the supplier accepts or rejects the purchase order, an XML document is posted to PeopleSoft
eProcurement either changing the status of the order to Dispatched or displaying an error
message.
Note. The purchase order’s status in PeopleSoft eProcurement is Approved until the supplier
accepts the order. If you change the purchase order and resend it to MarketPlace, MarketPlace
returns a response to the PO Dispatch Message Log informing you that there is a duplicate.
The following diagram illustrates the steps for sending PeopleSoft eProcurement purchase
orders to MarketPlace.
suppliers
PeopleSoft eProcurement
Process
MarketPlace
Orders
MarketPlace
Step 2
Step 1
purchase orders
Step 5
Step 3
purchase
orders
Step 4
responses and
comments
PeopleSoft
Gateway
Processing purchase orders using MarketPlace
The steps for sending PeopleSoft eProcurement purchase orders to MarketPlace are as
follows:
10-24
USING MARKETPLACE
WITH
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
1. Using business interlinks, the Process MarketPlace Orders process sends the purchase
orders as XML documents to the MarketPlace URL specified on the MarketPlace Buyers Buyers Setup page.
2. MarketPlace extracts the purchase orders and groups them by supplier.
3. Suppliers log on to the MarketPlace, review the purchase orders, and enter their
acceptance or rejection responses.
Suppliers can also enter comments on a purchase order header or purchase order line.
5. MarketPlace sends the suppliers’ responses and comments as XML documents to the
PeopleSoft Gateway URL specified on the MarketPlace Buyer Setup page.
6. PeopleCode processes the XML documents and updates the information for each purchase
order in PeopleSoft eProcurement by:
a. Changing the purchase order status to Dispatched if the supplier accepted the PO.
b. Inserting the most current supplier message on the PO Dispatch Message Log page for
every supplier response. Any supplier comments entered on the PO header appear on
this page, along with an icon enabling access to the PO line comments from the
supplier.
c. Displaying a Rejected status on the PO Dispatch Message Log page for any purchase
order that the supplier rejects.
Note. If you have not set up the application message gateway, you can retrieve the
purchase order status by clicking the Get Order Status button on the PO Dispatch Message
Log page. The purchase order status is changed to Dispatched and notes entered at the
header level appear. Supplier notes entered at the PO line level are only visible if you
have set up the application message gateway.
See Also
Processing MarketPlace Orders
Setting Up MarketPlace Buyers
“Dispatching Purchase Orders in PeopleSoft eProcurement”
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING MARKETPLACE
WITH
PEOPLESOFT
EPROCUREMENT
10-25
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Used to Send PeopleSoft eProcurement Purchase Orders to
MarketPlace
Page Name
Object Name
Navigation
Usage
Process MarketPlace
Orders
PV_MS_PO_SEL_RU
N
eProcurement,
Dispatch Purchase
Order
Send your purchase
orders to the
MarketPlace.
Click the MarketPlace
link to access the
Process MarketPlace
Orders page.
Processing MarketPlace Orders
Access the Process MarketPlace Order page.
Select to run the order status check process, which
retrieves the current status of your POs from MarketPlace.
You can view the most recent PO status on the PO
Dispatch Message Log page.
Run Order Status Check
Note. After you have run the Process MarketPlace Orders process (PV_MS_PO_SEL), use
the PO Dispatch Message Log page to verify there were no dispatch problems and to view any
messages from the supplier.
See Also
Setting Up MarketPlace Buyers
“Dispatching Purchase Orders in PeopleSoft eProcurement”
10-26
USING MARKETPLACE
WITH
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CHAPTER 11
Using Procurement Cards in
PeopleSoft eProcurement
This chapter provides an overview of the PeopleSoft eProcurement procurement card (PCard)
and discusses how to:
•
Set Up Procurement Cards.
•
Use a procurement card on a requisition.
•
Process procurement card transactions.
•
Run procurement card processes.
Understanding PeopleSoft eProcurement Procurement Cards
The PeopleSoft eProcurement procurement card (PCard) supports credit card purchases that
are made by employees in your organization.
Note. PCards work only with purchase orders that are sent to the MarketPlace website or
another MarketSite.
Here is an overview of the PCard process:
1. A requester enters a requisition to charge a purchase for an assigned PCard.
2. The requisition is approved and the purchase order is created.
3. The PCard information is sent with the purchase order to the MarketPlace website.
4. MarketPlace sends the purchase order (with the PCard data) to the vendor.
5. The vendor passes the PCard information, including the date, amount charged, card
number, and so on to the bank that issued the PCard.
6. On a regular basis, the bank sends an electronic statement containing all PCard
transactions.
7. A process in PeopleSoft eProcurement reconciles the bank’s statement to the PeopleSoft
eProcurement purchase orders using PCards. Bank charges that cannot be matched to a
PeopleSoft eProcurement purchase order (PO) display on a page for manual
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING PROCUREMENT CARDS
IN
PEOPLESOFT
EPROCUREMENT
11-1
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
reconciliation. Charges can be accepted or denied. Once a line on the bank statement is
approved, it posts to PeopleSoft Payables so that a payment can be issued to the bank.
Ghost Cards
The PeopleSoft eProcurement PCard process includes a feature called the ghost card. With
ghost cards, when a purchase order is transmitted from PeopleSoft eProcurement to
MarketPlace (to the vendor), the PCard number is not transmitted. Instead, the vendor is
directed to use the PCard that is on file. This ensures safer electronic transmissions, because
the PCard number is not contained in the transaction.
PeopleSoft eProcurement contains a PeopleSoft Workflow process that enables employees to
request a PCard.
Note. The procurement cards in PeopleSoft eProcurement function differently than they do in
PeopleSoft Purchasing. A PeopleSoft eProcurement procurement card can be entered directly
on a requisition; in PeopleSoft Purchasing, the procurement card is used separately from
requisitions.
See Also
“Using Workflow Processes in PeopleSoft eProcurement,” Using Workflow to Request a
Procurement Card
Setting Up Procurement Cards
This section discusses how to:
11-2
•
Set up the procurement card provider.
•
Define the PCard provider’s file layout.
•
Define parameters for the Auto Reconcile process.
•
Set up the procurement card user.
•
Request that a procurement card be issued to a user.
•
Define the ghost card feature.
USING PROCUREMENT CARDS
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Pages Used to Set Up Procurement Cards
Page Name
Object Name
Navigation
Usage
Procurement Card
Vendor
CC_CARD_TBL
eProcurement,
Procurement
Application
Administration
Identify the merchant
as a procurement card
vendor.
Click the Maintain
Vendors link.
Click the Procurement
Card Vendors link to
access the Procurement
Card Vendor page.
List of Merchants
CC_VNDR_NM
eProcurement,
Procurement Card
Assign the vendor ID
to a merchant.
Click the Merchant
Vendor Xreference link
to access the List of
Merchants page.
Preferred Vendors
CC_VNDR_XREF
Assign the vendor ID
to a merchant.
eProcurement,
Procurement Card
Click the Merchant
Vendor Xreference link
to access the Preferred
Vendors page.
Personal Data
CC_PERSONAL_DA
TA
Enter individual user
information such as the
employee’s personnel
status and home
address.
eProcurement,
Procurement
Application
Administration
Click the Maintain
Procurement Options
link.
Click the Employee
Profile link to access
the Personal Data page.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING PROCUREMENT CARDS
IN
PEOPLESOFT
EPROCUREMENT
11-3
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
Proxy
CC_SECURITY
eProcurement,
Procurement
Application
Administration
Enter all valid users
that are authorized to
work on the statement
reconciliation for this
procurement card
user’s bank statement.
Click the Maintain
Procurement Options
link.
Click the Employee
Profile link to access
the Personal Data –
Proxy page.
Card Data
CC_CARD_DATA
eProcurement,
Procurement
Application
Administration
Click the Maintain
Procurement Options
link.
Click the Employee
Profile link to access
the Personal Data –
Card Data page.
Procurement Card
Reconciliation Setup
PV_CC_RECON_TOL
Enter credit card
vendor and account
information. Multiple
cards can be setup for
one employee.
Depending on the type
of purchases the
procurement card user
makes, the user may be
issued multiple
accounts. This page
enables you to set up as
many cards as are
required per employee.
Define the parameters
for the Auto Reconcile
process.
eProcurement,
Procurement
Application
Administration
Click the Maintain
Procurement Options
link.
Click the Procurement
Card Options link to
access the Procurement
Card Reconciliation
Setup page.
Request Procurement
Card
PV_CC_REQUEST
eProcurement,
Procurement Card
Click the Procurement
Card Requests link to
access the Request
Procurement Card
page.
11-4
USING PROCUREMENT CARDS
IN
PEOPLESOFT
EPROCUREMENT
Request that a
procurement card be
issued to a user.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
Ghost Card Vendor
Setup
PV_CC_VNDR_SETU
P
eProcurement,
Procurement
Application
Administration
Define the ghost card
feature that is to be
used for procurement
card transactions that
are sent to a
procurement card
vendor.
Click the Maintain
Procurement Options
link.
Click the Ghost Card
Vendors link to access
the Ghost Card Vendor
Setup page.
Setting Up the Procurement Card Provider
The banks that issue your procurement cards must be established as PeopleSoft vendors.
To set up a procurement card issuer as a vendor:
1. Enter the vendor name, addresses, contact numbers, locations, and other necessary
information in the Vendor Information component.
This creates a vendor ID for this issuer.
2. Identify the vendor ID as a procurement card vendor on the Procurement Card Vendor
page.
3. Assign the vendor ID to a merchant on the List of Merchants and Preferred Vendor pages.
See Also
PeopleSoft Setting Up Procurement Options PeopleBook, “Maintaining Vendor Information,”
Entering Vendor Information
PeopleSoft Setting Up Procurement Options PeopleBook, “Defining Procurement Options,”
Defining Corporate Card Vendors
Defining the PCard Provider’s File Layout
The Procurement Card Transactions process loads the card transactions that have been sent by
the procurement card provider. Because different banks can send the credit card transactions
in different formats, you must define the format. We deliver one format with PeopleSoft
eProcurement. To define another file layout, modify the file layout
PV_PCARDFILE_FILELAYOUT using PeopleSoft Application Designer.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING PROCUREMENT CARDS
IN
PEOPLESOFT
EPROCUREMENT
11-5
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
See Also
PeopleSoft PeopleTools PeopleBook: Application Designer, “Using PeopleSoft Application
Designer”
Defining Parameters for the Auto Reconcile Process
Access the Procurement Card Reconciliation Setup page.
Set tolerances and minimums for the reconciliation of the bank statement charges compared to
the PeopleSoft eProcurement purchase orders that are issued with a PCard.
Tolerance
Enter the percentage tolerance for reconciling PCard
charges on the bank statement with PeopleSoft
eProcurement purchase orders. The Auto Reconcile
process tries to match by amount. This percentage
indicates the percentage of price variance that is allowed
to match and mark with a status of Verified.
Tolerance Amount
Enter the amount tolerance for reconciling PCard charges
on the bank statement with PeopleSoft eProcurement
purchase orders. The Auto Reconcile process tries to
match by amount. This tolerance indicates the price
variance allowed to match and mark with a status of
Verified.
Minimum Amount to
Reconcile
Enter an amount. Any line of the bank statement that is at
or below this amount is given the status Verified.
Note. If the Tolerance or Tolerance Amount field is left blank, zero tolerance is used (an
exact match must be found). Both tolerances apply and both must be met for a statement line
to be reconciled and given a status of Verified.
Setting Up the Procurement Card User
Access the Personal Data page.
Use the Employee Profile pages to define the employees who are using a procurement card.
The employee profile records the employee ID, name, address, PeopleSoft user ID,
procurement card number, amount limitations, expiration dates, and other information.
See Also
PeopleSoft Purchasing PeopleBook, “Defining Procurement Cardholder Information,”
Viewing Cardholder Personal Data
PeopleSoft Purchasing PeopleBook, “Defining Procurement Cardholder Information,”
Defining Cardholder Proxies
11-6
USING PROCUREMENT CARDS
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
PeopleSoft Purchasing PeopleBook, “Defining Procurement Cardholder Information,”
Defining Cardholder Card Data
Requesting Issuance of a Procurement Card
Access the Request Procurement Card page.
After you complete and save this page, a PeopleSoft Workflow process PV_CC_REQUEST
routes the information to the individual who authorizes procurement cards. Administrators
use this page to approve the request for a procurement card. When the administrator opens
this page, the fields are display-only.
Account
Enter the account that should be used to post charges
against this procurement card. Account is the top level of
the chart of accounts (ChartFields) that are used to record
accounting entries. Enter the account for the accounts
payable account for this vendor.
Description and
Cardmember Number
(credit card number)
If any other procurement cards have been issued to you,
the description and credit card number appear. For
security, only the last 5 digits of the card number appear.
Note. The fields in the Amount Limits and Transaction Limits areas are for future use.
See Also
“Using Workflow Processes in PeopleSoft eProcurement,” Using Workflow to Request a
Procurement Card
Defining Ghost Cards
Access the Ghost Card Vendor Setup page.
If you use procurement cards as ghost cards, provide the vendor with the PCard numbers to
store in their files. None of the purchase orders that are sent to the vendor from MarketPlace
contain the procurement card number. The purchase order is marked for PCard, and the
vendor is directed to use the credit card number that is on file. No procurement cards are
transmitted electronically.
SetID
The setID of the vendor.
Vendor
The ID of the vendor that uses ghost cards. You must
send this vendor the procurement card number to keep on
file.
Ghost Card
Select an option:
Ghost Card Available: Turns on the ghost card feature for
this vendor. No procurement card number(s) is
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING PROCUREMENT CARDS
IN
PEOPLESOFT
EPROCUREMENT
11-7
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
electronically transmitted to this vendor on a purchase
order.
Ghost Card Not Available: Turns off the ghost card
feature for this vendor. Procurement card number(s) are
electronically transmitted to this vendor on a purchase
order.
Using a Procurement Card on a Requisition
Note. To use the PCard feature in PeopleSoft eProcurement, set up card providers (vendors),
users, reconciliation tolerances, request workflow, and ghost card options.
After you have set up the procurement cards in PeopleSoft eProcurement, requesters can use
their procurement cards directly on the requisition.
The following diagram illustrates creating and dispatching a procurement card requisition:
11-8
USING PROCUREMENT CARDS
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Enter requisition with
PCard information
using PeopleSoft
eprocurement
source
requisition to
PO
Dispatch PO
using
MarketPlace
Order Process
PCard info
stored on
PV_REQ tables
PCard data
transmitted
with PO to
MarketPlace
MarketPlace
Supplier
retrieves POs
Supplier
Creating and dispatching orders using procurement cards
To use a procurement card on a PeopleSoft eProcurement requisition:
1. Enter items on a new requisition or access an existing requisition that has not been
submitted.
2. Access the Requisition Summary page and select the Use PCard check box on any
requisition line that has a MarketPlace vendor accepting procurement cards.
A field for the procurement card appears.
3. Enter the procurement card vendor or the procurement card number in the Procurement
Card field.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING PROCUREMENT CARDS
IN
PEOPLESOFT
EPROCUREMENT
11-9
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
You can search for PCards by procurement card vendor or procurement card number.
Only the cards that you are authorized to use are displayed.
4. Save the requisition.
The system looks at each line on the requisition where the Use PCard check box is
selected. If the vendor of that item does not accept procurement cards, or if this is not a
MarketPlace item, an error message appears.
Once the requisition is submitted and approved, it is sourced onto a purchase order.
5. Dispatch the purchase order to MarketPlace using the Process MarketPlace Orders Process
page.
The suppliers retrieve the purchase orders from MarketPlace.
See Also
“Creating Requisitions in PeopleSoft eProcurement,” Creating Requisitions
“Using the Buyer Station, ”Using the Quick Sourcer
“Using MarketPlace with PeopleSoft eProcurement,” Processing Marketplace Orders
Processing Procurement Card Transactions
After a purchase order is dispatched to a MarketPlace vendor with procurement card
information, the next step is to receive the statement of charges from the procurement card
provider.
The following diagram illustrates procurement card transaction processing:
11-10
USING PROCUREMENT CARDS
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
Bank
statement
stored in
PeopleSoft
CC_TRANS_
EC table
PEOPLEBOOK
Bank or other Pcard
provider
Supplier
MarketPlace
EPROCUREMENT
Data Retrieval
Process
PCard Statement
CC_TRANS_LINE
and
CC_TRANS_DIST
tables
Auto
Reconciliation
process
(PV_CCREC
ON)
Create
Payment
process
(CCPAYCRE)
Post Liability
process (CCLIAB)
Manually
reconcile
remaining
transactions
using Reconcile
Transaction page
Post Payment
process
(CCPAYCRE)
Final Posting
process
(CCFINPOS)
Load statement
process
(PO_CCLOAD)
Processing procurement cards
Following are steps for processing procurement card transactions in PeopleSoft eProcurement:
1. The supplier retrieves purchase orders from MarketPlace and sends the procurement card
information to the credit card supplier.
2. The credit card supplier generates the electronic bank statement.
3. When the electronic statement arrives from the credit card supplier, it is loaded into the
PeopleSoft table CC_TRANS_EC, using the USBank Data Retrieval process page or
another statement load process.
4. You run the Load Statement process to move the statement from the CC_TRANS_EC
table to the CC_TRANS_LINE and CC_TRANS_DIST.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING PROCUREMENT CARDS
IN
PEOPLESOFT
EPROCUREMENT
11-11
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Defaults from the Employee Profile’s Procurement Card Limits and Restrictions page are
used to populate the CC_TRANS_DIST table, including GL Unit (General Ledger unit),
Account, Department, Product, Project ID, Location Code, and Ship To Location.
5. You run the Auto Reconcile Process page to compare the lines of the statement to the
purchase orders with PCard information.
This process matches the purchase orders with the statement lines and marks the line
Verified or Approved. The review time is less than it is with manual reconciliation.
6. You use the Reconcile Transactions page to review and approve the statement lines and
add or change distribution information for transactions that were not reconciled in step 3.
7. The Post Liability process (CCLIAB) accrues the statement.
8. The Create Payment process (CCPAYCRE) creates the payment voucher.
This process can be run at any time after the statement is received.
9. The Post Payment process (CCPAYPOS) posts the payment.
10. The Final Posting process (CCFINPOS) creates the final posting.
This process reverses the procurement card accrual account by crediting that account and
debiting the account that is identified on the statement distribution lines.
Usually, when a purchase order is dispatched, we want the system to pay the vendor.
However, with procurement cards, the procurement card provider pays the vendor. To prevent
the vendor from being paid twice, you change the following fields on the purchase order
header:
•
Set Match Action to No.
•
Set Match Status to Matched.
This prevents the purchase order from being picked up during voucher creation in PeopleSoft
Payables.
See Also
PeopleSoft Purchasing PeopleBook, “Managing Procurement Cards,” Setting Up Load
Statement Options
PeopleSoft Purchasing PeopleBook, “Managing Procurement Cards,” Manually Reconciling
Procurement Card Transactions
Note. In PeopleSoft Payables, you can create a voucher from a matched purchase order by
using the Copy PO page with the View Matched/Cancelled Only check box selected. If you
select this option and use the PeopleSoft eProcurement procurement card, you can pay both
the vendor and the PCard provider for the same item (double payment).
11-12
USING PROCUREMENT CARDS
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Statement Line Statuses
Each line on the bank statement is given a status to indicate where that line is in the
reconciliation process:
Staged
The line has been loaded into the staging (interface) table
CC_TRANS_EC.
Initial
The line has been processed by the Load Statement
process and is in the tables CC_TRANS_LINE and
CC_TRANS_DIST. Initial indicates that no reconciliation
has been done on this line or that the Auto Reconciliation
process could not match it to a PO.
Verified
This status is assigned:
Manually, using the Reconcile Transaction page.
By the Auto Reconciliation process when the lines have
been matched to the total of a purchase order (header
level) with or without using the percentage and amount
tolerances from the Procurement Card Reconciliation
Setup page.
By the Auto Reconciliation process when the line is below
the minimum amount to reconcile on the Procurement
Card Reconciliation Setup page.
The statement line must have an Approved status in order
to be sent to PeopleSoft Payables for payment and
creating accounting entries. This approved status is
assigned:
Approved
Manually, using the Reconcile Transaction page.
By the Auto Reconcile Process page when the statement
lines are matched to the purchase order lines (line level).
By the Reconcile Transaction page when you manually set
the statement lines to Approved.
The reconciliation process eventually closes approved
lines.
Closed
Running Procurement Card Processes
This section discusses how to:
•
Load procurement card transactions.
•
Reconcile bank statement charges.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING PROCUREMENT CARDS
IN
PEOPLESOFT
EPROCUREMENT
11-13
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Pages Used to Run Processes for Procurement Card Transactions
Page Name
Object Name
Navigation
Usage
PCard Processes
PV_ADM_PCARD_P
ROC
eProcurement,
Procurement
Application
Administration
Run the processes for
procurement cards.
Click the Run
eProcurement
processes link to access
the PCard Processes
page.
Access is limited to
users with the
eProcurement action
role System_Admin.
USBank Data Retrieval
(process)
PV_PCARDFILE_PN
L
Click the US Bank
Statement Load link on
the PCard Processes
page.
Load procurement card
transactions that have
been sent by the
procurement card
provider.
Auto Reconcile
Process
PV_CC_RCN_PARM
S
Click the Auto
Reconcile link on the
PCard Processes page.
Reconcile bank
statement charges to
the dispatched
purchase orders.
Loading Procurement Card Transactions
Access the USBank Data Retrieval page.
You can use this page or another statement load process to load these procurement card
transactions.
File Path
Enter the directory path and file name of the bank
statement that is to be loaded.
Load PCard Transaction
Click to initiate the PeopleCode that loads procurement
card transactions from the procurement card vendor into
the CC_TRANS_EC table. If no data exists, a message
informs you that the PV_Card data cannot be found.
Reconciling Bank Statement Charges
Access the Auto Reconcile Process page.
The Auto Reconcile process:
•
11-14
Calculates the total by purchase order by totaling the line amounts of the
CC_TRANS_LINE table with the same business unit and the same PO ID for all lines
that have the status Initial.
USING PROCUREMENT CARDS
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
•
EPROCUREMENT
PEOPLEBOOK
Retrieves the minimum amount for this business unit from the Procurement Card
Reconciliation Setup page.
If totals from the first step (calculating PO totals) are less than or equal to the minimum
amount, the line status changes from Initial to Verified. The amounts are too small to be
significant.
•
Attempts to match the statement’s PO totals from the first step (calculating PO totals)
to the purchase order totals.
If the business unit, purchase order ID, and amount match, the line status changes from
Initial to Verified. The process attempts to match at the line level.
•
Finds the percent and amount tolerances for this business unit on the Procurement
Card Reconciliation Setup page.
If the business unit, purchase order ID, and amount match, using these tolerances, the line
status changes from Initial to Verified.
•
Attempts to match at the line level by comparing the statement line to the purchase
order line.
If the business unit, PO ID, line number, and vendor item ID match, the line status
changes to Approved. Also, if there is only one line on the purchase order, the system
copies the accounting distribution information from the PO’s distribution level to the
statement line’s distribution level (CC_TRANS_DIST).
•
The process records the approval date as the current date and the approving user as the
user ID used to run the process, if the line’s status changes to Verified or Approved.
The Auto Reconcile process also records if sales or use tax was paid and the amount
that was paid.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING PROCUREMENT CARDS
IN
PEOPLESOFT
EPROCUREMENT
11-15
CHAPTER 12
Managing Requisitions
This chapter provides an overview of the requisition management process and describes how
to:
•
Maintain requisitions.
•
Approve requisitions.
Understanding Requisition Management
Use requisition management to review, edit, approve, or cancel service requisitions.
The Manage Requisitions page displays only active requisitions that do not have a status of
Complete. After the requisition is dispatched on a purchase order, the goods are received and
the vendor is paid. The Requisition Reconciliation process (PO_REQRCON) then marks the
requisition status Complete. Canceled requisitions and those that are fulfilled by inventory
stock are also marked Complete.
With requisition management, you can:
•
Design your own ChartField or commodity approval by using functional pages.
•
Use wireless workflow approver to approve requisitions with a web-enabled cellular
phone or personal digital assistant (PDA).
Common Elements Used in This Chapter
Click the Cycle button to access the Requisition Cycle
page where you can view where your requisition is located
in the requisition cycle.
If the requisition has the status Open or Pending, click the
Edit button to return to the Requisition Summary page,
where you can make changes to the requisition.
Note. Approved requisitions can be edited if
Commitment Control is enabled, the budget status is
Error, and you are using PeopleSoft Workflow. These
requisitions are resubmitted to workflow after editing.
Click the Approval Status button to access the
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
MANAGING REQUISITIONS
12-1
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Requisition Approval Status page where you can review
the approval status of this requisition.
Click the Submit button to run the Run Initialize
Workflow process (PV_RUN_WF_INIT). This button is
available only if the Schedule Approval Process check box
is selected on the Run Initialize Workflow Process page
and if your user profile includes a role using the role
action ALLOW_WF_INIT.
Click the Cancel button to access the Requisition Details
page where you can cancel this requisition.
Show Status
Displays requisitions with the following statuses:
All: Displays all requisitions except those with the status
Complete.
Approved: The requisition is approved and can become a
PO.
Canceled: The requisition was entered and saved but was
canceled. A canceled requisition can be reopened within a
certain number of days as specified for the Purchasing
business unit; otherwise, it is closed permanently.
Complete: After the requisition is dispatched on a PO, the
goods are received and the vendor is paid. A background
process marks the requisition status Complete. Canceled
requisitions and those that are fulfilled by inventory stock
are also marked Complete.
Denied: The requisition is denied in the approval process.
Open: The requisition has been entered and saved but not
yet submitted, or the receipt has been entered and saved
but might have errors.
PO(s) Created: The requisition has been placed on a PO.
PO(s) Dispatched: The requisition has been placed on a
PO, and the PO has been dispatched to the vendor.
Pending: The requisition has been submitted and is
awaiting approval.
Received: The requisition has been placed on a PO. The
PO has been dispatched to the vendor, and the goods have
been partially or fully received.
Searched: Retrieves the last search that you performed on
the Requisition Name field. If a value is in the
Requisition Name field, it is used in the search.
12-2
MANAGING REQUISITIONS
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Maintaining Requisitions
Use the Manage Requisitions page to maintain, search for, and sort your requisitions.
Use the eProcurement Installation Options page to define the maximum number of rows that
are retrieved and displayed on the Manage Requisitions page.
This section discusses how to:
•
Maintain requisitions.
•
View requisition details.
•
View line details.
See Also
“Using PeopleSoft eProcurement Administration,” Setting Up Installation Options and
Enabling Attachments
Pages Used to Maintain Requisitions
Page Name
Object Name
Navigation
Usage
Manage Requisitions
PV_REQ_STATUS
eProcurement, Manage
Requisitions
Review, edit, or cancel
a requisition, make a
change request, receive
a purchase order (PO),
or return an item to the
vendor.
Requisition Details
PV_REQ_PO_DTLS
eProcurement, Manage
Requisitions
View the details of a
requisition.
Click the Requisition
Name field link to
access the Requisitions
Details page.
Requisition Cycle
PV_REQ_CYCLE_PA
GE
eProcurement, Manage
Requisitions
Click the Cycle button
to access the
Requisition Cycle
page.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
View a requisition’s
position throughout the
process by moving
your cursor over each
button to display the
status for that step.
MANAGING REQUISITIONS
12-3
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
Purchase Order Inquiry
PV_PO_LINE_INQ
eProcurement, Manage
Requisitions
View the approval
steps and status of a
requisition line.
Click the Cycle button
to access the
Requisition Cycle
page.
Click the Purchase
Order button on the
Requisition Cycle page
to access the Purchase
Order Inquiry page.
Line Details
PV_PO_LINE_DTL_I
NQ
Click the Line Details
button on the Purchase
Order Inquiry page.
Review additional
information about the
item and purchase
order line.
Requisition Approval
Status
PV_WORKFLOW_AP
PR
eProcurement, Manage
Requisitions
View the approval
steps and status of a
requisition line.
Click the Approval
Status button to access
the Requisition
Approval Status page.
Cancel Requisition
PV_REQ_CANCEL
eProcurement, Manage
Requisitions
Click the Cancel button
to access the
Requisition Details
page where you can
cancel your requisition.
Re-Open Requisition
PV_REQ_CANCEL
eProcurement, Manage
Requisitions
Click the Re-Open
button to access the
Re-Open Requisition
page.
Review the details of a
requisition; cancel a
requisition.
Review the details of a
requisition and reopen
a requisition.
Maintaining Requisitions
Access the Manage Requisitions page.
Note. If the role action NO_DEFAULTS is assigned to the user, no requisitions appear in the
scroll area until the user clicks Go.
Budget
12-4
MANAGING REQUISITIONS
This column appears when Commitment Control is
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
enabled.
Click the Re-Open button to change the status of a
Canceled requisition to Open. An Open status requisition
must be submitted by using the Requisition Summary
page.
Click the Change button to access the Select Purchase
Order for Change Request page, where you can select the
requisition line to create a change request.
Click the Receive button to access the Select Items to
Receive page, where you record the receipt of items from
this requisition. This button is available only if the PO is
dispatched.
Click the Return button to access the Return to Vendor
page, where you can enter information needed to return
the items to the vendor. This option is available only if an
approved requisition has been dispatched on a PO and if
the items have been received from the vendor.
Click the Commitment Control button to update the
budget check status. This button appears only if
Commitment Control is enabled and if the budget status is
Not Checked.
Note. The Requester and Entered By fields appear only for users who are assigned the role
action REQ_MGR_OPR.
See Also
PeopleSoft PeopleTools PeopleBook: Workflow, “Introduction to Workflow”
PeopleSoft Setting Up and Using Commitment Control PeopleBook, “Understanding
PeopleSoft Commitment Control”
Viewing Requisitions Details
Access the Requisitions Details page.
The stage of the requisition line in the sourcing process:
Status
Available: The requisition line has not yet been placed on
a PO or inventory stock request.
In Process: A sourcing process is running on this
requisition line, or there is an error in creating a PO.
Complete: The requisition line has been sourced to an
inventory stock request or a PO.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
MANAGING REQUISITIONS
12-5
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Click the Inventory Item button to access the Requisition
to MSR List page, where you can view stock request
information.
This button appears on any requisition line that can be
fulfilled by a PeopleSoft Inventory material stock request.
The button appears if the item is defined as an inventory
item on the Item Definition - General page: Common
page.
Receipt Status
The receipt status for this PO:
PO Not Received: No quantities for this PO line have been
received.
PO Partially Received: Part or all quantities for this PO
line have been received. Even if the quantity is fully
received, the status does not change until the Match
Request page in PeopleSoft Payables is run.
PO Received: All quantities for this PO line have been
received and the Matching process (AP MATCHING) in
PeopleSoft Payables is run.
Click the View Receipt button to access the Receipt For a
Casual User page. This button appears if a receipt has
been recorded for this line.
Click the Change Request button to access the Change
Request Header page, where you can enter a change
request for this requisition line. This button appears if the
PO has been dispatched but not received.
Viewing Line Details
Access the Line Details page.
12-6
Buy Agree ID (buying
agreement ID)
This ID is a pre-existing price agreement with the vendor.
If this PO line is associated with a buying agreement, the
agreement’s pricing is used.
Category
The item’s category code that is defined on the Item
Definitions page.
Vndr Catlg (vendor catalog)
The name of the vendor’s catalog that this item is from.
This information appears by default from the Item Vendor
page.
Vnd Item ID (vendor item
ID)
The item ID that the vendor uses to reference this item.
This information appears by default from the Purchasing
Attributes - Item/Vendor page.
Manufacturer ID
The manufacturer of this item. This information appears
by default from the Item Definitions - General page:
MANAGING REQUISITIONS
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Definition tab.
Price Date
The date that is used in calculating the price. The purchase
order date or the schedule due date is used to determine
which price adjustments and minimum quantities apply.
Price Qty (price quantity)
Indicates that the price has been calculated based on the
quantity at the line level or shipment schedule level.
Config Code (configuration
code)
If this item is modified, the configuration code specifies
the modifications that are needed. PeopleSoft Product
Configurator generates this code.
Template
The configuration code template that defines each
character that is used in the Config Code field.
Withholding Applicable
Indicates that the voucher line matching this PO line
might be subject to withholding. If you select the
Withholding option, the withholding code appears to the
right.
See Also
PeopleSoft Purchasing PeopleBook, Defining Purchasing Item Information,” Defining
Purchasing Item Attributes
Approving Requisitions
This section discusses how to:
•
Approve requisitions by using the Manage Approvals page.
•
Approve requisitions by using a wireless deviceпЈ§a web-enabled cellular phone or a
PDA.
Page Used to Approve Requisitions
Page Name
Object Name
Navigation
Usage
Manage Approvals
PV_APPR_MGR2
eProcurement, Manage
Approvals
Review the requisitions
that you have approved
or that you are
responsible for
approving.
Approving Requisitions by Using the Manage Approvals Page
Access the Manage Approvals page.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
MANAGING REQUISITIONS
12-7
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
See Also
“Using Workflow Processes in PeopleSoft eProcurement”
Prerequisites
Set up these attributes before using the Wireless Workflow Approval:
•
Ensure that wireless devices using the application support the Wireless Application
Protocol (WAP) standard.
These devices include a range of WAP telephones and personal devices such as Palm III,
Palm V, Palm VII, Handspring Visor, RIM Blackberry pager, and the Kyocera QCP 6035
Smartphone.
•
If you are behind a firewall, you might need to install Wireless Workflow Approver on a
server that is outside the firewall.
WAP gateways cannot access web servers that are behind firewalls.
When defining a system password, consider that it will be entered on a keypadпЈ§using both
uppercase and lowercase letters will slow the login process.
Using Wireless Workflow Approver
All the steps in the following procedure are performed on your wireless device.
To use Wireless Workflow Approver:
1. Enter a URL for the server where your application is located.
This is not the URL that you use on your computer to access PeopleSoft eProcurement.
2. Press the LANG button to select a preferred language.
3. (Optional) Select a different preferred language by using the Up and Down buttons.
a.
Press the Link button.
b.
Press OK to return to the Login screen without changing the preferred language.
When the original preferred language is selected, OK is displayed.
4. Press the LOGIN button.
5. Enter your user ID, and press OK.
6. Enter your password, and press OK.
7. Press the Reqs (requisitions) button.
12-8
MANAGING REQUISITIONS
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
8. Select a requisition, and press Reqs to view the details of the requisition.
9. Press Approve or Deny to approve or deny the requisition.
10. Press Return to display the Pending requisitions list.
11. Select another requisition to review, or use the Up button to clear the Pending requisitions
selection and display an OK control.
a.
Press OK to return to the Login screen.
b.
Press Return to return to the Main Menu.
12. When you’re finished, return to the Main Menu and sign off.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
MANAGING REQUISITIONS
12-9
CHAPTER 13
Using the Buyer Station
This chapter provides an overview of the Buyer Station in PeopleSoft eProcurement and
discusses how to:
•
Link to buyer tasks and manage purchase orders.
•
Use the Quick Sourcer process.
•
Access vendor tables, item tables, and item definitions.
•
Access inquiries and reports.
•
Analyze PeopleSoft eProcurement information using bar graphs.
Understanding the Buyer Station
The Buyer Station is a PeopleSoft eProcurement page that is designed for organization buyers.
The Buyer Station page provides numerous links to PeopleSoft Purchasing and enables you to:
•
Process requisitions and change requests from your requestors.
•
Add your own purchase orders and change orders.
•
Perform tasks that are related to your job as a purchasing professional.
The Buyer Station enables a buyer to turn requisitions into purchase orders and dispatch them.
The following diagram illustrates the process flow from requisition to purchase order:
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING
THE
BUYER STATION
13-1
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Requisition
saved and
submitted
Requisition
approved
manual control
automatic process
Requisition
Expeditor
page
Quick Sourcer
process
PO created
PO created
material stock
request created
Manage
Purchase
Order page
PO approved
PeopleSoft
Inventory
Dispatch PO
to
vendor
using
XML
to vendor using
email, print, fax,
or phone
to a direct
merchant
to MarketPlace
Requisition to Purchase Order Process Flow
See Also
“Creating Requisitions in PeopleSoft eProcurement,” Creating Requisitions
“Managing Requisitions,” Approving Requisitions
Using the Quick Sourcer
Adding and Changing Purchase Orders and Creating Change Orders
“Dispatching Purchase Orders in PeopleSoft eProcurement”
Common Elements Used in This Chapter
Search
13-2
USING
THE
BUYER STATION
Click to initiate a search for the purchase orders or
requisitions that meet your criteria. A purchase order
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
must match all the search criteria that you enter. If you
cannot find the purchase order that you want, remove
some of your search criteria to broaden the search, and try
again.
The Purchasing business unit.
Business Unit
Click the Attachments button to display any files that are
attached to this purchase order.
The PCard button is displayed if this purchase order uses
a procurement card to purchase items from the vendor.
Linking to Buyer Tasks and Managing Purchase Orders
In this section, we discuss how to:
•
Manage purchase orders.
•
Review requisitions created by employees.
•
Review and change staged purchase order details.
•
Review suggested vendors.
Pages Used to Link to Buyer Tasks and Manage Purchase Orders
Page Name
Object Name
Navigation
Usage
Buyer Station
PV_PO_MAIN
eProcurement, Buyer
Station
Link to pages with
various tasks for an
organization buyer.
Manage Purchase
Orders
PV_PO_LIST
eProcurement, Manage
Purchase Orders
Add a new purchase
order, change an
existing purchase
order, or create a
change order.
Requisition Expediter
PV_PO_REQ_SOURC
E
eProcurement,
Expedite Requisition
Review and process
requisitions that are
created by organization
employees.
Requisitions must have
the status Approved.
View Staged PO
PEOPLESOFT PROPRIETARY
AND
PV_PO_REQ_CREAT
E
CONFIDENTIAL
Click the View Staged
PO button on the
Requisition Expediter
page.
Review and change the
details of a staged (not
yet created) purchase
order.
USING
THE
BUYER STATION
13-3
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
Suggested Vendor
PV_PO_SUG_VNDR
Click the Suggested
Vendor button on the
Requisition Expediter
page.
View the vendor that
was added by a
requester on the
Special Request Suggest a Vendor page.
Managing Purchase Orders
Access the Manage Purchase Orders page.
Use the top section of this page to search for existing purchase orders.
Buyer
Enter the name of the buyer on the purchase order. You
can select only buyers that are authorized for your user ID
on the User Preferences page.
List of Purchase Orders
Vendor
Vendor ID used on this purchase order. This is the
supplier to whom the PO is sent.
See Also
PeopleSoft Application Fundamentals for FIN, ESA, SCM, “Defining User Preferences”
Defining Overall User Preferences
“Using PeopleSoft eProcurement Administration,” Setting Up Installation Options and
Enabling Attachments
“Using Procurement Cards in PeopleSoft eProcurement”
Reviewing Requisitions Created by Employees
Access the Requisition Expediter page.
Use the search criteria at the top of the page to determine which requisitions to display. Only
approved requisitions appear on this page.
Buyer Name
Enter the name of the buyer to use when the purchase
order is created from this page. Choose from the buyers
that are listed on the User Preferences page.
Vendor
Select the vendor on the requisition line. Leave this field
blank to see all requisition lines.
Once requisitions are displayed, you can change or add a vendor or create a purchase order.
Submit PO
13-4
USING
THE
BUYER STATION
Click to create the purchase order for the requisition lines
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
that you have selected using the Select Req (select
requisition) check box. This button stages the items and
launches the PO Calculations and Create PO processes. A
vendor must be assigned to the requisition line before a
PO can be created.
Select All
Click to access the Select Req check box for the displayed
requisition lines.
Set Vendor
Click to apply the vendor ID in the Vendor Name field to
the requisition lines that you have selected using the
Select Vndr (select vendor) check box.
Vendor Name
Enter the vendor ID of the vendor that you want assigned
to all the requisition lines that you have selected using the
Select Vndr check box.
View Staged PO
Click to access the View Staged PO page, where you can
review the details of the PO before it is created. You must
select the line—using the Select Req check box—before
you can enter this page.
Deselect All
Click to clear the Select Req check boxes for the displayed
requisition lines.
List of Requisitions
Select Req. (select
requisition)
Select to enable a purchase order to be created when the
Submit PO button is used. You cannot change the
requisition line when you select this check box.
Select Vndr (select vendor)
Select to apply the vendor in the Vendor Name field when
the Set Vendor button is used.
PO Qty (purchase order
quantity)
The quantity that is ordered from the vendor. This is from
the requisition quantity field, but you can change the
quantity before the PO is created.
Click the Suggested Vendor button to access the
Suggested Vendor page, where you can review the vendor
suggested by the requester.
See Also
“Using PeopleSoft eProcurement Administration,” Setting Up Installation Options and
Enabling Attachments
Reviewing and Changing Staged Purchase Order Details
Access the View Staged PO page.
To split this shipment schedule line into multiple
distribution lines, select Qty or Amt (amount) as the
Distribute by
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING
THE
BUYER STATION
13-5
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
method of splitting.
Distribution Detail
Amount
The extended price of the distribution line (unit price
times quantity).
Pct (percentage)
The percentage of quantity or amount on this distribution
line.
Location
The internal shipping location.
See Also
PeopleSoft Application Fundamentals for FIN, ESA, SCM, “Defining and Using ChartFields”
Reviewing Suggested Vendors
Access the Suggested Vendor page.
After reviewing the vendor, you can override it with a vendor from the vendor catalog, or you
can add this vendor to the vendor catalog by using the Supplier & Item Catalog page.
See Also
PeopleSoft Managing Items PeopleBook, “Working With Items,” Using Item Catalog
Maintenance
Using the Quick Sourcer
The Quick Sourcer process creates orders from requisitions by creating a material stock
request in an organizations inventory stock or creating a purchase order to send to the vendor.
In this section, we discuss the Quick Sourcer process and how to:
•
Enter parameters for the AutoSelect Requisitions process.
•
Enter parameters for the PO Calculations and Create Purchase Order processes.
The Quick Sourcer process combines the following PeopleSoft Purchasing processes:
13-6
AutoSelect Requisitions
process (PO_REQSORC)
Applies the priority one vendor to each requisition line.
Build Inventory Demand
process (PO_REQINVS)
Checks your organizations inventory stock to see if the
order can be filled internally. This process applies only if
PeopleSoft Inventory is installed. If stock is found, a
material stock request (MSR) is created in PeopleSoft
Inventory, and the requisition is marked as complete. The
MSR ships the stock that is needed to the requester.
USING
THE
BUYER STATION
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
PO Calculations process
(PO_POCALC)
Verifies that the requisition has been completely filled
from inventory stock. If it has not, the process passes the
remaining quantity that is needed to the Create Purchase
Order process.
Create Purchase Order
process (PO_CREATE)
Creates a purchase order for requisition quantities that
were not filled by the Build Inventory process. You can
set up the system so that if there is not enough inventory
stock, an MSR is issued for part, and a purchase order is
created for the remaining quantity that is needed.
Pages Used for the Quick Sourcer
Page Name
Object Name
Navigation
Usage
Quick Sourcer Autosource Parameters
PV_RUN_REQSORC_
1
eProcurement, Buyer
Station
Enter parameters for
the AutoSelect
Requisitions process.
Quick Sourcer Purchase Order Values
PV_RUN_REQSORC_
2
Click the Purchase
Order Values link on
the Quick Sourcer Autosource Parameters
page.
Enter parameters for
the PO Calculations
process and the Create
Purchase Order
process.
Entering Parameters for the AutoSelect Requisitions Process
Access the Quick Sourcer - Autosource Parameters page.
Select the type of requisition. Values are:
Request Type
Inventory: Processes only the requisition lines for which
the Inventory Source checkbox is selected.
Note. You can select the Inventory Source checkbox on
the Items Definition page.
Purch Ord (purchase order): Processes only the
requisition lines for which the Inventory Source checkbox
is not selected.
Both: Processes both types of requisitions.
Item ID Required
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
Select to process the requisitions that have a valid item ID
that is set for AutoSelect. Define an item for AutoSelect
on the Purchasing Attributes – Purchasing Controls page.
If this check box is cleared, Quick Sourcer processes
special requests. If the special request does not include a
vendor ID, then the requisition line will be in error status
in the PO Staging tables. If this check box is selected,
then all special requests are manually processed using the
Requisition Expediter page.
USING
THE
BUYER STATION
13-7
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Req Selection (requisition
selection)
Select to run this process for specified requisitions using
one of the following options:
Specific: Opens up a field, Req ID, to enter one specific
requisition.
Range: Makes the From and To fields available so that
you can enter a range of requisition IDs.
Date Selection
Option
Specify date selection criteria to select the requisition lines
with source dates that are within your specified date
criteria, as related to the current system date:
C: Current date.
M: Current date minus number of days.
N: No date selection criteria.
P: Current date, plus number of days.
S: Specified date.
Operand
Restricts the range to before, equal to, or after the date in
the Date field. For example, to select requisitions for
sourcing that have source dates for the next three days,
select P in the Option field, <= in this field, and 3 in the
Nbr Days (number of days) field.
Nbr Days (number days)
The number of days for the before, equal to, and after
selection in the Operand field.
Date
Specify the date to use in your date selection criteria. This
field is required when you select S in the Option field.
See Also
PeopleSoft Managing Items PeopleBook, “Working With Items,” Viewing Item Definition and
Item Change Information
PeopleSoft Purchasing PeopleBook, “Using Purchase Order Sourcing,” Running the
AutoSelect Requisitions Application Engine Process
Entering Parameters for the PO Calculations and Create Purchase Order
Processes
Access the Quick Sourcer - Purchase Order Values Page
Buyer
13-8
USING
THE
BUYER STATION
Select the buyer to use on the purchase order header in
case the PO Calculations process cannot determine the
buyer. The buyer name is carried at the line level on the
requisition, so a requisition can have multiple buyers.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
When the PO Calculations process creates the purchase
order header, it must assign a buyer name. If all the
staged lines that go on one PO have the same buyer name,
the PO Calculations process uses that name on the header.
However, if the staged lines that go on the PO have
different buyer names, and the process that created the
staged entry did not specify a name, the name that you
enter here is used on the purchase order header.
Consolidation Method
Determines whether purchase orders are consolidated by
business unit, vendor, and buyer (select B), or by business
unit and vendor only (select V). The consolidation method
applies only to staged rows that are marked for
consolidation.
For example, if you choose to consolidate by business unit
and vendor only, then all the rows that go to the same
vendor in each business unit are grouped into one PO,
even if they have different buyers. Alternately, if you add
buyer to the criteria, POs are built in the same manner.
However, they are split between buyers so that each buyer
has a separate PO with this configuration.
Lead Time Factor %, Ship
to Priority Factor %, Price
Factor %, and Vendor
Priority Factor %
These fields are used for flexible sourcing. To override
the category and item settings, enter the percentage weight
that you want the PO Calculations process to give the
factor when the application process is evaluating vendors
for flexible sourcing. The sum of these factors must be
100 percent.
Purchase Order Date
Enter a date for the purchase order, if a date has not been
assigned. If you leave this field blank, the PO
Calculations process uses the current system date.
Purchase Order Reference
Enter a purchase order reference for the purchase orders.
This is a free-form field.
Pre-Approve Vendor
Select to automatically approve the vendor that the
PO_POCALC process selects. This enables you to run the
PO Calculations process (PO_POCALC) and the Create
PO process (PO_POCREATE) as a unit, without having to
approve the vendors.
Build PO's as Approved
Select so that the POs that are created when you run the
Create PO process (PO_POCREATE) have an Approved
status. If you select this option, the process examines auto
approval criteria set at the business unit level.
Expedite Staged POs
Select to source all requisitions that are located in the
staging table.
Hold from Further
Processing
Select to place the resultant purchase orders on hold and
prevent further processing.
Calculate PO Line Numbers Select to ignore staged entry line numbers when the
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING
THE
BUYER STATION
13-9
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Create PO process creates new purchase orders and
assigns sequential line numbers, beginning with 1. If you
do not select this option, your performance is faster, but
you might have purchase orders with non-sequential line
numbers that do not begin with 1.
Select to make the resultant purchase orders eligible for
dispatch.
Allow Dispatch When
Approved
See Also
PeopleSoft Purchasing PeopleBook, “Using Purchase Order Sourcing”
Accessing Vendor Tables, Item Tables, and Item Definitions
This section discusses how to:
•
Access vendor tables, item tables, and item definitions.
Page Used to Access Vendor Tables, Item Tables, and Item Definitions
Page Name
Object Name
Navigation
Usage
Supplier & Item
Catalog
PV_PO_MAIN4
eProcurement, Buyer
Station
Access PeopleSoft
tables for vendor and
item information.
Click the Vendor and
Item Catalog link on
the Buyer Station page.
Maintain Items
PV_ADM_DEFINE_I
TEM
Click the Maintain
Items link on the
Supplier & Item
Catalog page.
Access PeopleSoft item
definitions.
Accessing Vendor Tables, Item Tables, and Item Definitions
Access the Supplier & Item Catalog page.
Maintain Vendors
Click to access the Vendor Information – Identifying
Information page, where you can review or change an
existing vendor or add a new vendor.
Maintain Items
Click to access the Maintain Items page, where you can
access the PeopleSoft item pages.
Accessing Inquiries and Reports
This section discuses how to access inquiry pages and reports.
13-10
USING
THE
BUYER STATION
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Pages Used to Access Inquiry Pages and Reports
Page Name
Object Name
Navigation
Usage
Inquiries and Reports
PV_RPT_MAIN
eProcurement, Buyer
Station
Access inquiry pages
and reports for
requisitions, purchase
orders, and items.
Click the Inquiries and
Reports link on the
Buyer Station page.
Accessing Inquiry Pages and Reports
Access the Inquiries and Reports page.
See Also
“Appendix: PeopleSoft eProcurement Reports”
Analyzing PeopleSoft eProcurement Information Using Bar Graphs
This section discusses how to generate and display PeopleSoft eProcurement bar graphs.
In addition to the standard reports and inquiries that PeopleSoft applications provide,
PeopleSoft eProcurement provides transactional analysis graphs. These bar graphs enable you
to view information about your PeopleSoft eProcurement requisition and purchase order
transactions. Four graphs are delivered with PeopleSoft eProcurement:
PO Status Analysis
Provides information about the current state of your
purchase orders by displaying the number of purchase
orders in each PO status.
PO Value Analysis
Provides information about your total PO costs by item
category or ship to location.
Requisition Status Analysis
Provides information about the current state of your
requisitions by displaying the number of requisitions in
each requisition status.
Value Frequency Analysis
Provides information about the frequency of large value
purchase orders versus small value purchase orders by
sorting the number of purchase orders within defined
monetary ranges.
PO Status Analysis Graph
This graph displays the number of purchase orders that are currently in each PO status. Each
column represents a different PO status; the height of the bar indicates the number of purchase
orders within that status. The number of POs in the largest column is noted at the top of the
graph. The Legend provides the total number of POs by status. The graph displays
information for only one PeopleSoft Purchasing business unit at a time. Within the business
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING
THE
BUYER STATION
13-11
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
unit, you can further limit the POs that are displayed to one vendor, one buyer, and a specific
date range.
PO Status Analysis graph
PO Value Analysis Graph
This graph displays the total monetary amount of the purchase orders. This information can
be processed by item category (using the PO line level) or by ship to location (using the PO
distribution line level). The method is noted at the top of the graph, along with the total PO
monetary value in the largest column. Each column represents a different item category or
ship to location; the height of the bar indicates the total monetary value of the purchase orders
in that category or location. If you sort the information by item category, then a note appears
below the graph with the item category descriptions. The Legend provides the total monetary
value of all POs by item category or ship to location. The graph displays information for only
one PeopleSoft Purchasing business unit at a time. Within the business unit, you can further
limit the POs that are displayed to one vendor, one buyer, and a specific date range.
13-12
USING
THE
BUYER STATION
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
PO Value Analysis Graph
Requisition Status Analysis Graph
This graph displays the number of requisitions that are currently in each requisition status.
Each column represents a different requisition status; the height of the bar indicates the
number of requisitions within that status. The number of requisitions in the largest column is
noted at the top of the graph. The Legend provides the total number of requisitions by status.
The graph displays information for only one PeopleSoft Purchasing business unit at a time.
Within the business unit, you can further limit the requisitions that are displayed to one
requester and a specific date range.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING
THE
BUYER STATION
13-13
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Requisition Status Analysis graph
Value Frequency Analysis Graph
This graph displays the frequency of high-value purchase orders versus low-value purchase
orders by sorting the number of purchase orders within defined monetary ranges. A purchase
order falls within a certain monetary range based on the total amount of the purchase order;
the height of the bar indicates the number of purchase orders within that monetary range.
Each monetary range is determined from the values that you enter before the graph is
generated.
The number of POs in the largest column is noted at the top of the graph. The Legend
provides the total number of POs within each monetary range. The graph displays information
for only one PeopleSoft Purchasing business unit at a time. Within the business unit, you can
further limit the POs that are displayed to one vendor, one buyer, and a specific date range.
Value Frequency Analysis graph
13-14
USING
THE
BUYER STATION
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Used to Generate and Display the Graphs
Page Name
Object Name
Navigation
Usage
Procurement Analysis
PV_GRAPH_MAIN
eProcurement, Buyer
Station
Generate and display
the transactional
analysis graphs using
requisition and
purchase order
information.
Click the Procurement
Analysis link on the
Buyer Station page.
Generating and Displaying PeopleSoft eProcurement Bar Graphs
Access the Procurement Analysis page.
Business Unit
The PeopleSoft Purchasing business unit containing the
requisitions or POs that are used to build the graph. The
business unit that is specified on the User Preferences –
Overall Preferences page is used as the default.
Vendor ID
Select a vendor ID to restrict the graph information to one
vendor. This field does not appear if you selected the Req.
Status Analysis graph option.
Buyer Name
Select a buyer name to restrict the graph information to
one buyer. The buyers in the drop-down list are those that
are authorized for your user ID on the User Preferences –
Procurement Page: Purchase Order Authorizations page.
This field does not appear if you selected the Req. Status
Analysis option.
Requester Name
If you selected the Req. Status Analysis graph option, you
can limit the graph data to just one requester by selecting a
requester name. The requesters in the drop-down list are
those that are authorized for your user ID on the User
Preferences – Procurement Page: Requisition
Authorizations page.
Graph
Click to generate your transactional analysis graph.
Reset
Click to delete the entries on this page. Then you can
enter new criteria for generating the next graph.
See Also
PeopleSoft Application Fundamentals for FIN, ESA, SCM, “Defining User Preferences”
Defining Overall User Preferences
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING
THE
BUYER STATION
13-15
CHAPTER 14
Dispatching Purchase Orders in
PeopleSoft eProcurement
This chapter provides an overview of dispatching purchase orders (POs) and discusses how to:
•
Dispatch POs.
•
Send POs to vendors by Electronic Data Exchange (EDX).
•
Using the monitor message component.
Understanding Dispatching Purchase Orders
After a PO is created in PeopleSoft eProcurement, the next step is to send (dispatch) the order
to the vendor. There are several ways to dispatch including electronic transmission to the
vendor’s website, electronic transmission to MarketPlace, email, print, fax, or phone. To
dispatch a PO by email, print, fax, or phone, use the PeopleSoft Purchasing Dispatch Purchase
Orders page. To electronically dispatch your POs, use PeopleSoft eProcurement.
The method used to dispatch a PO is determined by the vendor definition. On the Vendor
Information – Procurement Options page, choose the dispatch method that is to be used as the
default method by the PO. To electronically transmit a PO to a vendor or MarketPlace, select
EDX as the dispatch method. To send a PO to a direct merchant website or to MarketPlace,
define the vendor as a direct merchant or as a MarketPlace supplier.
PeopleSoft eProcurement sends POs to the following types of vendors by the following
methods:
Vendor
Send POs to vendors that are neither direct merchants nor
MarketPlace vendors by running the Purchase Order
Dispatch process (PV_PO_DISPATCH) or the Batch
Dispatch process (PV_DISPATCH) and then the Publisher
process. The dispatch processes set PO statuses to
Dispatched and load POs into interface tables for
publishing. The Publisher process then converts the POs
into eXtensible Markup Language (XML) and transmits
them directly to your vendors.
Direct Merchant
If a vendor is defined as a direct merchant on the Direct
Merchant Profile page, the system dispatches POs
associated with that vendor and electronically transmits
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
DISPATCHING PURCHASE ORDERS
IN
PEOPLESOFT
EPROCUREMENT
14-1
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
them to the direct merchant using only the Purchase Order
Dispatch page or the Batch Dispatch page.
If the vendor is defined as a MarketPlace supplier on the
MarketPlace Supplier Setup page, the PO is dispatched
and electronically transmitted to MarketPlace by using the
Process MarketPlace Orders Process page.
MarketPlace
Note. You can dispatch POs online only when the dispatch method of those POs is EDX. The
dispatch method for POs uses a default from the Purchasing Options - Purchasing Processing
Options page or the Vendor Information - Procurement Options page. You can change the
dispatch method on the PO manually.
The following diagram illustrates how PeopleSoft eProcurement POs are dispatched:
Manage
Purchase
Order page
PO
approved
Vendor dispatch
method is EDX?
PeopleSoft
Purchasing
Dispatch PO's
process
No
Yes
Sent to vendor by print,
email, fax, or phone
Purchase
Order
Dispatcher
page
Option 1
Yes
Vendor is a direct
merchant?
Electronically transmitted
to vendor's website
Yes
Batch Dispatcher
process
Option 2
No
Vendor is a
MarketPlace
supplier?
No
Yes
Transmitted to
MarketPlace
No
Option 2
Option 1
Purchase
Order
Dispatcher
page
Process
MarketPlace Orders
process
Batch Dispatcher
process
PO's in XML
Publisher process
Electronically transmitted to
vendor
Dispatching a PO to a vendor
14-2
DISPATCHING PURCHASE ORDERS
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
See Also
Peoplesoft Setting Up Procurement Options PeopleBook, “Maintaining Vendor Information,”
Entering Vendor Information
“Direct Connect Supplier Integration
Dispatching Purchase Orders
This section discusses how to:
•
Select purchase orders manually for dispatch.
•
Send dispatched POs to vendors.
•
View status and messages for your PO.
•
View messages entered on the PO line.
Pages Used to Dispatch Purchase Orders
Page Name
Object Name
Navigation
Usage
PO Dispatcher
PV_PO_MAIN2
eProcurement, Buyer
Station
Dispatch and publish
your POs manually.
You can also dispatch
and monitor your POs.
Click the Dispatch
Purchase Orders link to
access the PO
Dispatcher page.
Purchase Order
Dispatcher
PEOPLESOFT PROPRIETARY
AND
PV_PO_DISPATCH
CONFIDENTIAL
Click the Dispatcher
link on the PO
Dispatcher page to
access the Purchase
Order Dispatcher page.
DISPATCHING PURCHASE ORDERS
IN
The processes listed on
this page are set up (by
your system
administrator) to run in
the background on a
regular basis. You
need to use this page
only if you cannot wait
for the normal process
run.
Select POs manually
and dispatch them.
PEOPLESOFT
EPROCUREMENT
14-3
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
Batch Dispatcher
PV_PO_DIS_BATCH
Click the Batch
Dispatcher link on the
PO Dispatcher page to
access the PO Batch
Dispatcher page.
Dispatch batches of
PeopleSoft
eProcurement POs to
vendors. POs must
have the dispatch type
EDX to be included in
this process.
Publisher
PV_IN_RUN_PUB_M
SG
Click the Publisher link
on the PO Dispatcher
page to access the
Publisher page.
Send dispatched POs to
vendors using the
Publisher process.
Use this page to start
the PeopleSoft
Application Engine
process
(IN_PUB_MSGIN_PU
B_MSG), which starts
the Publisher process.
PO Dispatch Message
Log
PV_MS_PO_DISP_ER
R
Click the Dispatch
Message Log link on
the PO Dispatcher page
to access the PO
Dispatch Message Log
page.
View the status of your
PO and any messages
from your PO dispatch
process.
PO Lines Dispatch
Message Log
PV_MS_PO_LINE_E
RR
Click the PO Lines
Error Messages button
on the PO Dispatch
Message Log page.
View any messages
entered on the PO line
by the MarketPlace
supplier.
Selecting Purchase Orders Manually for Dispatch
Access the Purchase Order Dispatcher page.
The POs are staged for processing through the Publisher page. POs must have a dispatch type
of EDX to appear on this page. If this PO is being sent to a direct merchant, this page sends
the PO directly to the vendor’s website.
Sending Dispatched Purchase Orders to Vendors
Access the Publisher page.
Choose a criterion for selecting POs to publish. Your
choice determines your access to other fields on this page.
Values are:
Selection Type
Select BU (select business unit): Select by business unit.
Select Ven (select vendor): Select by vendor ID.
14-4
DISPATCHING PURCHASE ORDERS
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
If you select the Selection Type, Select BU, define the following settings:
BU Sel Type (business unit
selection type)
1 Bus Unit (one business unit): Select to publish POs to
vendors that are associated with a specific business unit.
All Bus: Select to publish POs to vendors that are
associated with all business units.
Enter the business unit that is associated with the vendors
to which you want to publish POs.
Business Unit
If you select the Selection Type Select Ven, define the following settings:
Vendor Selection
Values are:
Specific V: Select to publish POs to a specific vendor.
Select All: Select to publish POs to all vendors associated
with a specified SetID.
Vendor Set ID
Select the setID that is associated with the vendors to
which you want to publish POs.
Vendor ID
If you selected the Vendor Selection Type Specific V,
select the vendor to which you want to publish POs.
Location
If you selected the Vendor Selection Type Specific V,
select the vendor location where you want to publish POs.
Viewing Status and Messages for Your Purchase Order
Access the PO Dispatch Message Log page.
All POs appear for the following dispatch methods:
•
Dispatch to MarketPlace.
•
Electronically transmitted to the vendor by using the dispatch and publish processes.
Click the Get Market Order Status button to start the
process that retrieves the current status of your POs from
MarketPlace or another MarketSite. The Status column is
updated with the results. If MarketPlace has received the
order, the PO Status column changes to Dispatched.
The following information appears for each PO your search locates:
Date Added
PO date from the PO header.
PO Status
Current status of the PO within PeopleSoft eProcurement.
This status is from the PO header in PeopleSoft
eProcurement.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
DISPATCHING PURCHASE ORDERS
IN
PEOPLESOFT
EPROCUREMENT
14-5
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Reflects the stage of the PO within the dispatch process.
The status that appears could reflect the stage of the PO
when electronically transmitted to the vendor or when
dispatched to MarketPlace.
Status
When the PO is electronically transmitted to the vendor,
the values include:
Error: PO has not been dispatched nor published.
Dispatched: PO has been dispatched.
Published: PO has been dispatched and published.
When the PO is dispatched to MarketPlace, values
include:
Received: PO has been sent by PeopleSoft eProcurement
and received by MarketPlace. The system has not yet
received a response from MarketPlace.
Accepted: MarketPlace has received the PO, and the
supplier has responded and accepted it. Comments
attached to the PO header or line might also appear.
Completed: The PO has been sent to MarketPlace,
accepted by the supplier, the goods or services have been
received, and the supplier has been paid.
No Accept: MarketPlace has received The PO and the
supplier has responded and rejected it. Comments that
were attached by the supplier appear in the Message
column.
Cancelled: Supplier has accepted the PO, but has canceled
the order for a later time.
Pre-Pymt Required: Supplier has accepted the PO and has
assigned this status to indicate that a prepayment is
required to fulfill the order.
Other: Supplier has accepted the PO and later assigned
this status to indicate that there is a problem with the
order. The supplier’s messages at the PO header or line
level should detail this problem.
Completed: PO has been sent to MarketPlace, accepted by
the supplier, the goods or services have been received, and
the supplier has been paid.
Click the PO Lines Error Messages button to review
comments from the MarketPlace supplier about a PO line.
This button is only available for POs sent to MarketPlace.
For POs that are electronically transmitted to the vendor,
this column displays a message indicating whether the
system encountered errors when dispatching or publishing
Message
14-6
DISPATCHING PURCHASE ORDERS
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
POs. For POs sent to MarketPlace, this column displays
messages entered by the MarketPlace supplier on the PO
header.
Click the Get Market Order Status button to start the
process that retrieves the current status of the PO in the
same row from MarketPlace or from another MarketSite.
The Status column is updated with the results. If
MarketPlace has received the order, the PO Status column
changes to Dispatched.
Viewing Messages Entered on the Purchase Order Line
Access the PO Lines Dispatch Message Log page.
Line Number
Displays the line number of the PO. Only lines that
contain supplier messages appear. The PO could contain
additional lines that do not appear.
Message Text
Displays any message entered by the MarketPlace supplier
on this PO line.
Sending Purchase Orders to Vendors by EDX
This section discusses how to:
•
Define batch publish rules.
•
Assign chunk rules to vendors.
•
Publish purchase order messages.
•
Monitor PO messages.
By using the EDX method, you can transmit dispatched POs to vendors that are neither
MarketPlace vendors nor direct merchants by converting POs into application messages and
publishing them to vendors.
Prerequisites
To define installation options for PO publishing:
1. Define the message node.
To establish the message node through which you plan to publish POs, select the Local
Node checkbox on the Node Info tab of the Node Definition component. Navigate to
PeopleTools, Integration Broker, Node Definition.
2. Configure the PURCHASE_ORDER_DISPATCH message channel.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
DISPATCHING PURCHASE ORDERS
IN
PEOPLESOFT
EPROCUREMENT
14-7
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Navigate to the Transaction tab of the Node Definition component to configure the
PURCHASE_ORDER_DISPATCH message channel.
If the message channel is not linked to the Node:
Вѓ Click the Add Transaction button on the Transactions page to access the Node
Transactions page, where you can add the transaction.
Вѓ Select the Transaction Type of Outbound Asynchronous.
Вѓ Enter the Request Message for PURCHASE_ORDER_DISPATCH.
Вѓ Enter Version 1 as the Request Message Version.
3. Activate your messages.
Application messages are the fundamental building blocks of the application messaging
system. Messages are self-describing entities that are formatted in XML. Each message
contains data, such as PO parameters, that is distributed among systems when the program
is run.
Predefined messages are delivered with PeopleSoft eProcurement. Publish POs through
the PURCHASE_ORDER_DISPATCH message.
To ensure that the status of PURCHASE_ORDER_DISPATCH is set to Active, select
Active in the Status field on the Transaction Details page. You will automatically access
the Transaction Details page when you press Add on the Node Transaction page.
See Also
PeopleSoft Enterprise Integration PeopleBook, “Introducing the Effective-Date Publish
Utility,” Defining the Message Node, Message Channel, and Message Definition
PeopleSoft PeopleTools PeopleBook: Application Designer, “Using PeopleSoft Application
Designer”
Page Used to Send Purchase Orders to Vendors By EDX
Pages Name
Object Name
Navigation
Usage
Maintain Publishing
Rules
PV_ADM_PUBLISH
eProcurement,
Procurement
Application
Administration
Use the Maintain
Publishing Rules page
to access the setup
pages for sending
dispatched POs to the
vendor by using XML.
Click the Maintain
Publishing Rules link.
14-8
DISPATCHING PURCHASE ORDERS
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Pages Name
Object Name
Navigation
Usage
Batch Publish Rules
EO_MSGPUBATCH
eProcurement,
Procurement
Application
Administration
Define the publish
rules that determine
how your transactions
should be sent
electronically.
Click the Maintain
Publishing Rules link.
Click the Batch Publish
Rules link to access the
Batch Publish Rules
page.
Record Mapping
EO_MSGRECMAP
Specify the source data
for records (such as
POs) in messages
eProcurement,
Procurement
Application
Administration
Click the Maintain
Publishing Rules link.
Click the Batch Publish
Rules link to access the
Record Mapping page.
Batch Programs
EO_MSGBATPGM
Associate processes
with publishing rules.
eProcurement,
Procurement
Application
Administration
Click the Maintain
Publishing Rules link.
Click the Batch Publish
Rules link to access the
Batch Programs page.
Setup Vendor to Node
PO_CHUNK_VENDO
R
Assign chunking rules
to vendors.
eProcurement,
Procurement
Application
Administration
Click the Maintain
Publishing Rules link.
Click the Manage
ChunkRule Vendor ID
Map link to access the
Setup Vendor to Node
page.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
DISPATCHING PURCHASE ORDERS
IN
PEOPLESOFT
EPROCUREMENT
14-9
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Pages Name
Object Name
Navigation
Usage
Add Nodes to Chunk
Rules
EO_ADNODECHUN
K_PNL
eProcurement,
Procurement
Application
Administration
Assign nodes to
chunking rules.
Click the Maintain
Publishing Rules link.
Click the Map Node to
Chunk Rule link to
access the Add Nodes
to Chunk Rule page.
Defining Batch Publishing Rules
Access the Batch Publish Rules page.
See Also
PeopleSoft Enterprise Integration PeopleBook, “Establishing Publishing Rules Using the
Publish Utility,” Assigning Batch Publish Rules
Assigning Chunk Rules to Vendors
Access the Setup Vendor to Node page.
See Also
PeopleSoft Enterprise Integration PeopleBook, “Establishing Publishing Rules Using the
Publish Utility,” Creating a Chunking Rule
Mapping Nodes to Chunk Rules
Access the Add Nodes to Chunk Rule page.
See Also
PeopleSoft Enterprise Integration PeopleBook, “Establishing Publishing Rules Using the
Publish Utility,” Adding Nodes to Existing Chunking Rules
14-10
DISPATCHING PURCHASE ORDERS
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Publishing Purchase Order Messages
To publish PO messages:
1. Dispatch POs.
Use the PO Dispatcher page or the Batch Dispatcher page to dispatch POs and load them
into interface tables. Through the Purchase Order Dispatcher process page, select the POs
to dispatch. Through the Batch Dispatcher page, dispatch batches of POs grouped by
business unit, vendor, or date range. When you use the Batch Dispatcher page, run the
Batch Dispatch process to dispatch groups of PO messages.
2. Convert POs into XML application messages.
Use the Publisher page to initiate the Publisher process. Through the Publisher process,
convert the POs in your interface tables into XML application messages, and publish those
messages to your vendors.
See Also
PeopleSoft Enterprise Integration PeopleBook, “Activating Application Messaging EIPs,”
Setting up PeopleSoft Application Messaging EIPs
Using the Message Monitor Component
Monitor the messaging queues in your system through Application Message Monitor (also
called Message Monitor). It provides information about the delivery status of individual
messages and aids in error processing and resolution. Message Monitor is generally used by
system administrators.
This section discusses how to:
•
Use the Overview Page.
•
Monitor Message Instances.
•
View Pub Contracts.
•
View Sub Contracts.
•
View Synchronous Messages.
•
View the Channel Status.
•
View the Node Status.
•
View the Domain Status.
•
Use the Queries.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
DISPATCHING PURCHASE ORDERS
IN
PEOPLESOFT
EPROCUREMENT
14-11
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Pages Used to Access the Message Monitor Component
Page Name
Object Name
Navigation
Usage
Overview page
AMM_OVERVIEW
eProcurement, Buyer
Station
Access a high-level
overview of the status
of asynchronous
Message Instances,
Publication Contracts,
and Subscription
Contracts.
Click the Dispatch
Purchase Orders link to
access the PO
Dispatcher page.
Click the Publish
Monitor link to access
the Overview page.
Message Instances
AMM_PUBLIST
eProcurement, Buyer
Station
Click the Dispatch
Purchase Orders link to
access the PO
Dispatcher page.
Monitor the status and
details related to the
individual
asynchronous message
instances that exist in
either your live or
archived system.
Click the Publish
Monitor link to access
the Message Instances
page.
Pub Contracts
AMM_PUBCONLIST
eProcurement, Buyer
Station
Click the Dispatch
Purchase Orders link to
access the PO
Dispatcher page.
View outbound
publication work
orders to send to
remote message nodes
with which the system
is interacting.
Click the Publish
Monitor link to access
the Pub Contracts page.
Sub Contracts
AMM_SUBCONLIST
eProcurement, Buyer
Station
Click the Dispatch
Purchase Orders link to
access the PO
Dispatcher page.
View work orders to
run PeopleCode
programs to which the
local node subscribes.
Click the Publish
Monitor link to access
the Sub Contracts page.
14-12
DISPATCHING PURCHASE ORDERS
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
Synchronous Messages
AMM_SYNCMSGLIS
T
eProcurement, Buyer
Station
Displays inbound
synchronous messages
from remote nodes or
applications that
publish information.
Click the Dispatch
Purchase Orders link to
access the PO
Dispatcher page.
Click the Publish
Monitor link to access
the Synchronous
Messages page.
Channel Status
AMM_CHNL_STATU
S
eProcurement, Buyer
Station
Click the Dispatch
Purchase Orders link to
access the PO
Dispatcher page.
Displays the status of
the channels defined in
the local node.
Click the Publish
Monitor link to access
the Channel Status
page.
Node Status
AMM_NODE_STATU
S
eProcurement, Buyer
Station
Click the Dispatch
Purchase Orders link to
access the PO
Dispatcher page.
View, add, and delete
pause times for local
nodes.
Click the Publish
Monitor link to access
the Node Status page.
Domain Status
AMM_MULTIDOM
eProcurement, Buyer
Station
Click the Dispatch
Purchase Orders link to
access the PO
Dispatcher page.
View the domains that
have Pub/Sub servers
on them that are
running against the
application database.
Click the Publish
Monitor link to access
the Domain Status
page.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
DISPATCHING PURCHASE ORDERS
IN
PEOPLESOFT
EPROCUREMENT
14-13
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
Queries
PT_APMSGQRY_PG
eProcurement, Buyer
Station
Gather information
about the messaging
system meta-data
without having to
access the message
definitions, channel
definitions, or node
definitions in
Application Designer.
Click the Dispatch
Purchase Orders link to
access the PO
Dispatcher page.
Click the Publish
Monitor link to access
the Queries page.
Note. This role is
generally reserved for
the system
administrator.
See Also
PeopleSoft Integration Broker PeopleBook, “Using Integration Broker Monitor
PeopleSoft Integration Broker PeopleBook, “Using Integration Broker Monitor,” Using the
Monitor Message Component
PeopleSoft Integration Broker PeopleBook, “Using Integration Broker Monitor,” Using the
Overview Page
PeopleSoft Integration Broker PeopleBook, “Using Integration Broker Monitor,” Using the
Message Instance Page
PeopleSoft Integration Broker PeopleBook, “Using Integration Broker Monitor,” Using the
Pub Contracts Page
PeopleSoft Integration Broker PeopleBook, “Using Integration Broker Monitor,” Using the
Sub Contracts Page
PeopleSoft Integration Broker PeopleBook, “Using Integration Broker Monitor,” Using the
Synchronous Message Page
PeopleSoft Integration Broker PeopleBook, “Using Integration Broker Monitor,” Using the
Channel Status Page
PeopleSoft Integration Broker PeopleBook, “Using Integration Broker Monitor,” Using the
Node Status Page
PeopleSoft Integration Broker PeopleBook, “Using Integration Broker Monitor,” Using the
Domain Status Page
PeopleSoft Integration Broker PeopleBook, “Using Integration Broker Monitor,” Using the
Queries Page
14-14
DISPATCHING PURCHASE ORDERS
IN
PEOPLESOFT
EPROCUREMENT
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CHAPTER 15
Using Change Requests and Change
Orders
This chapter provides an overview of PeopleSoft eProcurement change requests and discusses
how to:
•
Add a change request.
•
View change requests.
•
Approve a change request.
•
Convert a change request to a change order.
Understanding PeopleSoft eProcurement Change Requests
After a request has been sent to a vendor, there are two ways to change your order:
•
Using Change Requests
If you are a requester (not a buyer), you can make some changes on your original
requisition by using the change request function. This change request is sent to your buyer
for approval. If the unit price or quantity is increased, your supervisor must also approve
the change. After your change request is approved, a background Change Purchase Order
process (PO_POCHNG) creates a change order that is sent to the vendor.
•
Using Change Orders
If you have the security privileges of a buyer, you can change the dispatched purchase
order (PO) and resubmit the order to the vendor as a change order. A change order can be
created in PeopleSoft eProcurement or in PeopleSoft Purchasing.
Note. The purchase order must be dispatched before a change request or change order can
be created. If your purchase order has been partially or fully received, only the due date
and quantity can be changed. The new quantity on the change request cannot be fewer
than the received quantity. If your purchase order was dispatched to MarketPlace, change
requests and change orders cannot be used.
The following diagram illustrates the change request process flow:
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING CHANGE REQUESTS
AND
CHANGE ORDERS
15-1
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Change request is
entered with a
status of Pending
Approval
Change Request
business process
Price or quantity increased
on change request?
Buyer Station:
Change Request
Pending Approval
page
No
Yes
Change Request
Details page
Supervisor's To
Do List
approved
change requests
Change Request
Amt Approval
page
PO Changes
process
Change Order
Message Log
page
Dispatch process
Change request process flow
To use the change request function in PeopleSoft eProcurement:
1. Requester adds a change request.
The change request function enables any requester to submit changes in a dispatched
purchase order. When the change request is created, the data is inserted into the staging
tables for change requests: CHNG_RQST, CHNG_RQST_DTL, and
PV_CHNG_RST_DTL. The change request has a status of Pending Approval.
15-2
USING CHANGE REQUESTS
AND
CHANGE ORDERS
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Note. Requesters can enter a change request only if the dispatched purchase order
contains their items. If the dispatched purchase order contains the requisitions from more
than one requester, a change request cannot be submitted. The buyer must submit a
change order.
2. Requester’s supervisor approves any increase in unit price or quantity.
If the requester increases the unit price or quantity of an item, the requester’s supervisor
and the buyer must approve the change request. PeopleSoft Workflow checks for an
increased unit price or quantity and then routes the change request to the supervisor’s To
Do list for approval. Amount approval workflow can also apply if the change request is
above the amount limit. (The requester’s supervisor is listed on the requester’s User
Profile page.)
3. Buyer approves a change request.
A buyer must approve any change request. In the Buyer Station, the Change Request
Pending Approval page enables buyers to view all outstanding change requests to which
they have access. The buyer can select one change request and drill down to the Change
Request Details page. On this page, the buyer can review the change and approve it. To
view a change request, the buyer must be defined as a buyer on the requester’s User
Preferences - Procurement page - Purchase Order Authorizations page.
4. Create a change order.
To be sent to the vendor, a change request must be converted to a change order. A change
order is a duplicate of the original purchase order sent to the vendor but with the changes
that you are requesting. All approved change requests must use the PO Changes process
to convert them to change orders. Use the Change Order Message Log page to verify that
the change order was successfully created.
5. Dispatch a Change Order.
After a change order is created, send (dispatch) it to the vendor.
See Also
PeopleSoft Purchasing PeopleBook, “Creating Requisition Change Orders”
“Using Workflow Processes in PeopleSoft eProcurement,” Setting Up and Using Workflow
for Change Request Approvals
“Dispatching Purchase Orders in PeopleSoft eProcurement”
Approving a Change Request
Adding a Change Request
This section discusses how to:
•
Select requisition lines to create a change request.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING CHANGE REQUESTS
AND
CHANGE ORDERS
15-3
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
•
Enter a change request.
•
Enter a reason for a change request.
•
Enter changes to a line of a dispatched purchase order.
•
Enter a change request for purchase order shipment information.
To create a change request, make changes in the dispatched purchase order. A purchase order
is dispatched to the vendor with three levels: header, line, and shipment schedule. The change
request has the same three levels. Changes in the header affect the entire purchase order.
Changes in the line affect one item in the purchase order. Changes in the shipment schedule
affect the shipping details of an item.
Note. After the change request is saved, it can be cancelled (but not modified) by the buyer.
Pages Used to Add a Change Request
Page Name
Object Name
Navigation
Usage
Select Purchase Order
for Change Request
PV_CHNG_REQ_VW
eProcurement, Manage
Requisition
Select the requisition
line to create a change
request.
Click the Change
Request button for the
desired requisition.
15-4
Change Request
Header
PV_PO_CHNG_HDR
Change Request
Justification Comments
PV_CHNG_JUSTIFY
Change Request Line
PV_PO_CHNG_LINE
Change Request
Shipping
PV_PO_CHNG_SHIP
USING CHANGE REQUESTS
AND
CHANGE ORDERS
Click the Change
Request button on the
Select Purchase Order
for Change Request
page.
Click the Justification
Comment link on the
Select Purchase Order
for Change Request
page.
Click the Details
button beside the PO
line on the Select
Purchase Order for
Change Request page.
Click the Details
button on the Change
Request Line page.
Enter a change request.
You can cancel every
line of the purchase
order, cancel an
individual line, or
access the Change
Request Line page to
make changes.
Enter an explanation
for the change request.
The approver of the
change request sees
this justification.
Use this page to enter
changes to the
individual line of a
dispatched PO.
Alter the due date,
shipping location, and
quantity to be
delivered.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Selecting Requisition Lines to Create a Change Request
Access the Select Purchase Order for Change Request page.
Note. The purchase order must be dispatched and not received before a change request can be
created.
Entering a Change Request
Access the Change Request Header page.
Show All PO Lines
Only the PO line that you selected appears on this page.
To view all the lines of this purchase order, click this
button.
Item ID (item identification)
The item ID from the Item Definition page. This column
is blank for a special request item with no item ID.
Cancel PO Line
Select to cancel this PO line and its corresponding
shipment schedules. To cancel the entire PO, use the
Cancel PO check box instead of canceling each line.
Click the Details button to access the Change Request
Line Page to cancel or to change shipment information.
Note. If the only changes that you are making in the dispatched purchase order are on this
page, save the page before leaving. Your change request is now complete, and the message
Change Request Submitted appears.
Entering a Reason for a Change Request
Access the Change Request Justification Comments page.
EDI Comments
Enter your reason for submitting this change request. The
approver of the change request sees this justification.
Entering Changes to a Line of a Dispatched Purchase Order
Access the Change Request Line page.
Description
The item’s description. You cannot change the
description of an item if you selected it from the item
catalog.
New Description
Enter a new description for a non-catalog item. The field
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING CHANGE REQUESTS
AND
CHANGE ORDERS
15-5
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
appears only if the line contains a special request item.
Click the Details button to access the Change Request
Shipping Page to alter the due date, shipping location, and
quantity to be delivered.
Note. If these are your final changes, save this page before leaving. A Change Request
Submitted message appears if a change order is created.
Entering a Change Request for Purchase Order Shipment Information
Access the Change Request Shipping page.
New Due Date
Enter a new date for the shipment to arrive at your
shipping location. An entry here is compared to the value
in the Due Date field. If it is a different value, a change
request is created when you save this page.
New Ship To
Enter a new shipping location if you want the items
delivered to a different location than the original purchase
order indicated. An entry here is compared to the value in
the Ship To field. If it is a different value, a change
request is created when this page is saved.
New Quantity
Enter a new quantity for the shipment. An entry here is
compared to the value in the Quantity field. If it is a
different value, a change request is created when you save
this page.
New Price
Enter a new unit price for the shipment. An entry here is
compared to the value in the Price field. If it is a different
value, a change request is created when you save this
page.
Note. If these are your final changes, save this page before leaving. A Change Request
Submitted message appears if a change order is created.
See Also
Understanding PeopleSoft eProcurement Change Requests
Viewing Change Requests
This section discusses how to:
•
15-6
Monitor change requests.
USING CHANGE REQUESTS
AND
CHANGE ORDERS
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
•
EPROCUREMENT
PEOPLEBOOK
View purchase order change requests.
Pages Used to View Change Requests
Page Name
Object Name
Navigation
Usage
Change Requests List
PV_CHNG_RQST_LI
ST
eProcurement, Manage
Requisition
Monitor your change
requests. All your
change requests appear
so that you can track
when they are reviewed
or approved.
Click the Inquire
Change Request link
on the Manage
Requisitions page.
Change Requests
(inquiry)
PV_CHNG_RQST_IN
Q
Click the Details
button on the Change
Requests List page.
View the changes
requested for one
purchase order and the
current status of those
changes.
Monitoring Change Requests
Access the Change Requests List page.
Reviewed
If selected, a buyer has reviewed the change request but
might not have approved it. It must be approved before it
is sent to the vendor.
Last User to Modify
The user ID of the last person to change, review, or
approve the change request.
Approved
If selected, a buyer has approved the change request.
Click the Details button to access the Change Requests
Inquiry page to display change request information for a
single purchase order.
Viewing Purchase Order Change Requests
Access the Change Request Inquiry page.
Source
Identifies the PO source. This is usually User Change
Request, but it could be another source if change requests
are uploaded into PeopleSoft eProcurement.
Process Status
To create a change order from the approved change
request, run the PO Change process. The Process Status
column displays the current status of this change as it
applies to the PO Change process. Values are:
Initialized: The change request has been added, but a
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING CHANGE REQUESTS
AND
CHANGE ORDERS
15-7
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
change order has not yet been created.
In Process: The system is currently using this change
request to build a change order.
Complete: A change order has been created from this
change request.
Errors: The PO Change process attempted to create a
change order from this change request, but an error was
encountered.
Increase Approval
Displays the status of the approval for an increase. If the
change request increased the unit price or quantity, the
supervisor must approve before the buyer approves on this
page.
Approved
If selected, a buyer has approved the change request. The
PO Change process can now create a change order from
this change request.
Approving a Change Request
This section discusses how to:
•
View change requests that need approval.
•
Review and approve change requests.
Pages Used to Approve a Change Request
Page Name
Object Name
Navigation
Usage
Change Requests
Pending Approval
PV_CHNG_APPR_LI
ST
eProcurement, Buyer
Station
View a list of change
requests that need
approval. Only change
requests with a status
of Pending Approval
appear on this page.
To view a change
request, you must be
defined as a buyer on
the requester’s User
Preferences Procurement page:
Purchase Order
Authorizations page.
Click the Approve
Change Request link.
15-8
USING CHANGE REQUESTS
AND
CHANGE ORDERS
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
Change Request
Details
PV_CHANGE_REQU
EST
•
Review and approve
change requests.
For supervisor
approval:
Click the work entry
(on the eProcurement
Homepage) for the
change request needing
approval.
•
For buyer
approval:
Click the Details
button (on the Change
Request pending
Approval page) for an
order that appears.
Viewing Change Requests That Need Approval
Access the Change Requests Pending Approval page.
Click the Change Approval button to select the Change
Request Details Page to approve or deny the change
request.
Reviewing and Approving Change Requests
Access the Change Request Details page.
Both the supervisor and the buyer use this page for approval. The supervisor approves a
change request if the unit price or quantity is increased. The buyer always approves a change
request.
Reviewed
Select to indicate that the change request has been
reviewed but not approved. Selecting this check box
populates the current date in the Reviewed On field.
EDI Comments
The justification entered on the Change Request
Justification Comments page when the change request was
created.
Amount Approval
The current status of this change request in requisition
amount approval. When the unit price or quantity is
increased, the change request could require amount
approval workflow if it exceeds the threshold amount for
approval. The status is Pending, Denied, or Approved.
Approved
Use to approve all changes in this change request. Once
the change request is approved, the PO Change process
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING CHANGE REQUESTS
AND
CHANGE ORDERS
15-9
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
creates a change order to dispatch it to the vendor.
Note. Save the page after marking a change request as reviewed or approved.
See Also
Understanding PeopleSoft eProcurement Change Requests
“Using Workflow Processes in PeopleSoft eProcurement,” Setting Up and Using Workflow
for Change Request Approvals
Converting a Change Request to a Change Order
A change request must be converted to a change order to be sent to the vendor. A change
order is a duplicate of the original purchase order sent to the vendor, but it includes the
changes you are requesting.
To process approved change requests:
1. Run the PO Change process to convert the change requests to change orders.
2. Review the Change Order Message Log page for errors.
3. Run the Purchase order Dispatch Process to dispatch the change order to the vendor.
This is the standard dispatch process within PeopleSoft eProcurement that is used for all
purchase order dispatching.
See Also
PeopleSoft Purchasing PeopleBook, “Creating Requisition Change Orders”
15-10
USING CHANGE REQUESTS
AND
CHANGE ORDERS
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Pages Used to Process a Change Request to a Change Order
Page Name
Object Name
Navigation
Usage
PO Changes
RUN_PO_POCHNG
eProcurement,
Procurement
Application
Administration
Run the PO Change
(RUN_PO_POCHNG)
process.
Click the Run
eProcurement
Processes link.
Click the Buyer Station
Processes link.
Click the Change
Purchase Order link to
access the PO Changes
page.
Change Order Message
Log
PV_CHANGE_RQST_
MSG
Click the View
Processing Messages
button on the Change
Request Details Page.
Review any error
messages generated in
the PO Changes
process. After you
correct the change
request, resubmit it to
the PO Changes
process.
Dispatch Purchase
Orders
RUN_DISP_POPO005
eProcurement,
Procurement
Application
Administration
Run the PO
Dispatch/Print process
(POPO005) and
dispatch POs.
Click the Run
eProcurement
Processes link.
Click the Buyer Station
Processes link.
Click the Dispatched
Purchase Order link to
access the Dispatch
Purchase Order page.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
USING CHANGE REQUESTS
AND
CHANGE ORDERS
15-11
CHAPTER 16
Receiving Stock and Returning Items to
the Vendor
This chapter provides an overview of receiving stock and returning items to the vendor and
discusses how to:
•
Receive stock as a casual user.
•
Return items to a vendor.
•
Receive stock as a power user.
Overview of Receiving Stock
When you enter a requisition, PeopleSoft eProcurement processes it, places it on a purchase
order, and sends (dispatches) it to the vendor. If PeopleSoft Inventory is installed, the
requisition might come from your company’s warehouse stock instead of from a vendor.
When you receive the requested items, you record the receipt, which enables the buyers to
track the quality and promptness of your vendors.
PeopleSoft assigns a receipt ID to each saved receipt. Because there is not a one-to-one ratio
between purchase orders and receipts—a purchase order might have multiple receipt IDs due
to multiple shipments, or a shipment might have multiple purchase orders—this ID is stored
separately from the dispatched purchase order or the original requisition. If PeopleSoft
Payables is installed, a process matches the receipts to the purchase orders (to confirm that the
goods were shipped) before the vendor is paid.
Note. To record a receipt before your accounts payable department can pay the vendor, mark
receiving required for the item.
This section discusses how to:
•
Receive items by amount.
•
Use receipt notification workflow.
•
Use options for receiving stock.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
RECEIVING STOCK
AND
RETURNING ITEMS
TO THE
VENDOR
16-1
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Receiving Items by Amount
A receipt is usually recorded based on the quantity received. However, you can also receive
by amount in PeopleSoft eProcurement. This feature is particularly useful if you order and
receive services.
See Also
PeopleSoft Purchasing PeopleBook, “Receiving Shipments,” Receiving Items by Amount
Using Receipt Notification Workflow
PeopleSoft eProcurement enables requesters to record the receipt of their own goods. Because
some requesters do not record their receipts promptly, the workflow process for receipt
notification reminds requesters to receive their goods. If PeopleSoft Payables records the
voucher (vendor’s invoice) for the purchase order but no receipt is entered, workflow inserts a
reminder in the To Do List of the requester.
See Also
“Using Workflow Processes in PeopleSoft eProcurement,” Setting Up and Using Receipt
Notification Workflow
Using Options for Receiving Stock
After a purchase order is dispatched, the vendor ships the stock. When the stock arrives at
your location, use the receiving area to record the receipt. PeopleSoft eProcurement offers
four options for receiving stock:
16-2
Casual user receiving
The default setting. Items are delivered directly to a
casual user’s desk or area without being routed through
the company’s central receiving department. For
example, a Federal Express shipment is delivered directly
to you or your assistant. To enter the receipt, the user
opens the original requisition and links to the requisition’s
purchase order. The user then records the receipt on a
simplified form.
Casual user receiving with
edit and cancel privileges
A casual user can also be granted privileges to edit and
cancel receipts and to override a vendor’s return address.
To have these privileges, the casual user’s roles must
contain a user role that is included under
RECV_CASUAL_ALL on the eProcurement Role
Actions page.
Receiving by Ship To
Location
A casual user can be set up to receive all items shipped to
a ship to location specified as the Default Ship To location
in the Receiver Setup Page.
RECEIVING STOCK
AND
RETURNING ITEMS
TO THE
VENDOR
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
No receiving privileges
To prevent the casual user from having access to the
receiving area of PeopleSoft eProcurement, the roles must
contain a user role that is included under
NO_CASUAL_RECV on the eProcurement Role Actions
page.
Power receiving
A power user is an individual in the receiving department
or a purchasing professional who receives items by using
the receiving pages in PeopleSoft Purchasing. The power
user selects the purchase order and creates the receipt.
The power user can also record a receipt without a
purchase order. To be a power user, your roles must
contain a user role that is included under RECV_POWER
on the eProcurement Role Actions page.
See Also
“Using PeopleSoft eProcurement Administration,” Maintaining System Users and Roles
Common Elements Used in This Chapter
Values are:
Receipt Status
Open: The receipt is being entered into the system and has
not yet been saved or the receipt has been entered and
saved, but might be missing required information.
Received: The receipt has been entered and saved.
Hold: A power user has put the receipt on hold.
Moved: The necessary items in the receipt have been
successfully passed to PeopleSoft Asset Management,
PeopleSoft Inventory, or PeopleSoft Production
Management (if those applications are installed).
Complete: The receipt has finished all steps and is closed.
Cancelled: The receipt was entered and saved, but then
canceled. A cancellation cannot be reversed.
Receiving Stock As a Casual User
This section discusses how to:
•
Select items to receive.
•
Add or change a receipt.
•
Reject shipments.
•
Review or add asset information to an item.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
RECEIVING STOCK
AND
RETURNING ITEMS
TO THE
VENDOR
16-3
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
•
Generate tag numbers.
•
Generate serial numbers.
•
Enter the location for an item.
•
View recorded receipts.
To record a receipt:
1. Click the Receive button on the PeopleSoft eProcurement Homepage to access the Select
Items to Receive page.
2. Enter the quantities that are received and rejected.
3. Save the page.
Pages Used to Receive Stock As a Casual User
Page Name
Object Name
Navigation
Usage
Select Items to Receive
PV_PO_PICK_ORDE
RSC
eProcurement, Receive
Items
Select items that you
want to receive.
Receive
PV_RECV_WPO
eProcurement, Receive
Items
Add a new receipt of
one or more purchase
order lines; reject and
inspect received
quantities.
Select items to receive,
and then click the
Receive Selected
button to access the
Receive page.
16-4
Before creating a
receipt, verify that your
purchase order was
dispatched.
Reject Shipment
PV_RECV_REJECT
Click the Reject
Shipment link on the
Receive page.
Reject some or all of
the items that you are
recording in this
receipt.
Line Details
PV_RECV_WPO_DE
TAIL
Click the Details
button on the Receive
page.
View more information
about the item, all
receipts from this
requisition, and the
purchase order that is
used.
RECEIVING STOCK
AND
RETURNING ITEMS
TO THE
VENDOR
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
Page Name
Object Name
Shipment Condition
PV_RECV_COMMEN
T
Receipts For [a casual
user]
PV_RECV_UPDATE_
REC
Navigation
EPROCUREMENT
PEOPLEBOOK
Usage
Click the
Comments button on
the Receive page.
eProcurement, Receive
Items
Select items to receive,
and then click the
Receive Selected
button to access the
Receive page.
Enter or review the
condition of the
shipment when it
arrived at your
location.
Add details, return
items to vendor, or
cancel a receipt.
Click the Inquire
Receipts link on the
Receive page.
Asset Management
Information
PV_RECV_WPO_AM
Click the Asset Mgmt
(asset management)
button on the Receive
page.
Review or add asset
information that is
related to the item.
Generate Tag Numbers
PVRECV_AUTO_SE
RIAL
Click the Tag Numbers
link on the Asset
Management
Information page.
Generate a sequence of
tag numbers that are to
be applied to each asset
line.
Generate Serial
Numbers
PVRECV_AUTO_SE
RIAL
Click the Serialize link
on the Asset
Management
Information page.
Generate a sequence of
serial IDs that are to be
applied to each asset
line.
Inventory Putaway
Information
PV_RECV_WPO_PT
WY
Click the Putaway
Items button on the
Receive page.
Enter or review the
location in PeopleSoft
Inventory where this
item will be placed;
record serial and lot
IDs.
Inventory Item
Information
PV_RECV_INV_ITE
MS
Click the Inventory
Item Info link on the
Inventory Putaway
Information page.
View the inventory
information that is
defined for this item on
the Item Definition
page.
Storage Location
Search
PV_RECV_STOR_SR
CH
Click the Search button
on the Inventory
Putaway Information
page.
Search for a material
storage location in
PeopleSoft Inventory
where you can put the
received items.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
RECEIVING STOCK
AND
RETURNING ITEMS
TO THE
VENDOR
16-5
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Selecting Items to Receive
Access the Select Items to Receive page.
For a requisition line to appear on this page, the item must have been placed on a purchase
order and dispatched to the vendor. You can see the requisitions that you entered and those
that were purchased on your behalf. When the entire quantity of the item has been received,
the requisition line no longer appears on this page.
Requisition
Select the check box to the left of the line, and click
Receive Selected to display the Receive page.
Expected Qty (expected
quantity)
This column appears only if one of the lines was overreceived and an RTV (return to vendor) was created to
return the excess stock. This column displays the quantity
that you expect to receive (the requisition quantity or the
overage amount).
Receive By
This column appears only if one of the lines was received
by amount. The column displays the type of receiving:
Amount or Qty.
Recv Reqd (receiving
required)
Displays Y (yes) or N (no) to indicate whether the item
requires receiving in order to pay the vendor for the
goods. You need not enter a receipt for any item that is
marked with an N.
Inquire Receipts and
Inquire Return to Vendors
Click to display previously recorded receipts or RTVs for
your requisitions, if you are unsure about whether a
receipt form or an RTV has been entered for this
shipment.
Warning! Do not change the RTV Adjust Sourcing option after transactions have been
recorded in PeopleSoft eProcurement. If you change this option, it might alter the quantities
that are displayed so that they become inconsistent in the PeopleSoft eProcurement receiving
and RTV transactions.
See Also
PeopleSoft Purchasing PeopleBook, “Defining PeopleSoft Purchasing Business Units and
Processing Options,” Defining Purchasing Business Unit Options
“Dispatching Purchase Orders in PeopleSoft eProcurement”
Receiving Items by Amount
Adding or Changing a Receipt
Access the Receive page.
16-6
RECEIVING STOCK
AND
RETURNING ITEMS
TO THE
VENDOR
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Receipt No or New Receipt
The receipt ID that was assigned when the receipt was
entered. If you are adding a new receipt, New Receipt is
displayed until the page is saved. Then a receipt ID is
assigned automatically.
Received Date
The date that the shipment arrived. The default is today’s
date, but you can change it if the shipment arrived at a
different time.
RTV Detail
Click to access the RTV Information page, where you can
view RTV forms that have been submitted for this receipt.
This link is not available unless an RTV has been entered
for this receipt.
Reject Shipment
Click to access the Reject Shipment Page, where you can
reject some or all of the items that are sent to you.
Qty Received in Receipt
UOM (quantity received in
receipt unit of measure)
The quantity that was shipped to you, expressed in the
receiving UOM.
Click the Clone Quantity button to copy the received
quantity from one line to all other lines on this form.
When you have many items, use this button to save data
entry steps.
The quantity of received goods that you are going to keep.
The system calculates this quantity as your received
quantity, less the rejected quantity. If you reject part of
the shipment, the system recalculates this number.
Accept Qty
Click the Details button to access the Line Details page
where you can view more data about the item, the
purchase order that you are receiving, and the previous
and current receipts.
Click the Comments button to access the Shipment
Condition page where you can record the quality of the
shipment. Your purchasing department can use this
information to detect problems with vendor quality.
Click the Asset Management button to access the Asset
Management Information page where you can view or
change the fixed asset information such as serial ID and
asset profile ID. This button appears only if the item is
designated as a fixed asset for PeopleSoft Asset
Management.
Click the Putaway Items button to access the Inventory
Putaway Information page, where you can view or change
the inventory information such as serial ID and warehouse
location. This button appears only if the item is
designated as a PeopleSoft Inventory item.
Click the Device Tracking button to access the Device
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
RECEIVING STOCK
AND
RETURNING ITEMS
TO THE
VENDOR
16-7
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Tracking page.
See Also
PeopleSoft Managing Items PeopleBook, “Working With Items,” Using Device Tracking
PeopleSoft Inventory PeopleBook, ”Receiving and Putting Away Stock”
PeopleSoft Asset Management PeopleBook, “Adding and Maintaining Assets”
Rejecting Shipments
Access the Reject Shipment page.
Enter information about items that you are rejecting.
Reject Qty
Enter the quantity of the item that you are rejecting. This
can be all or part of the quantity that was delivered to you
(Received Qty). When you enter a quantity and move out
of the field, the remaining fields on this page are available
for entry.
Reject Action
Select how you want the vendor to correct the mistake.
This is an information field; to return stock to the vendor,
use the Return to Vendor page.
Reviewing and Adding Asset Information to an Item
Access the Asset Management Information page.
16-8
Tag Numbers
Click to access the Generate Tag Numbers page where
you can generate tag numbers.
Serialize
Click to access the Generate Serial Numbers page where
you can generate serial numbers.
Insert Non-Serial Row
Click to distribute non-serialized item rows to different
asset management custodians and locations. This
generates another asset row for the same Asset
Management unit. If you split the Asset Management
(AM) quantity, you must reduce your earlier AM
quantities for this unit. The total AM quantity for this unit
must match the total quantity that you've accepted. When
an item is inventory-related, you can’t split a quantity of 1
for a serialized row.
Next Asset ID
Click to assign a temporary value of AUTO-ASSIGN as
the line item’s asset ID value. This value is replaced with
the next available asset ID value when you save the
receipt.
RECEIVING STOCK
AND
RETURNING ITEMS
TO THE
VENDOR
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
AM Unit
The PeopleSoft Asset Management business unit where
the item is capitalized.
CAP Sequence (capital
acquisition planning
sequence)
The sequence number for the capital acquisition plan.
Cost Type
The cost type code for the receipt item if applicable. Cost
types represent different components of the cost of an
assetпЈ§such as materials, labor, and overhead. For
example, you can differentiate between the cost of
building an asset and its market value by allocating the
cost of production to one cost type and the margin of
profit to another cost type. Cost type, combined with the
asset category and transaction code, determines the
general ledger accounts into which the costs are entered.
Sel (select)
Select to display the Insert Non-Serial Row button if you
want to distribute non-serialized item rows to different
asset management custodians and locations.
Seq (sequence)
Identifies the receiving distribution sequence number that
is associated with the selected asset row.
Quantity
Quantity of items being distributed on the selected
distribution sequence.
Click the Cancel Row button to cancel this asset schedule
information. If the receipt has not been interfaced, this
asset row isn’t interfaced and is deleted during receipt
interface processing. If the receipt is interfaced, a retire
asset transaction is passed to PeopleSoft Asset
Management.
See Also
PeopleSoft Asset Management PeopleBook, “Adding and Maintaining Assets”
Generating Tag Numbers
Access the Generate Tag Numbers page.
Note. The Multiplier algorithm uses the first number sequence from the right end of the start
number to use as the number to increment. For example: NB-8000-001-ABC would use 001
as the first number sequence, not 8000.
Overwrite existing numbers
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
Select to overwrite existing tag number information from
the Asset Management Information page with the values
that you have entered on this page.
RECEIVING STOCK
AND
RETURNING ITEMS
TO THE
VENDOR
16-9
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Generating Serial Numbers
Access the Generate Serial Numbers page.
The fields on this page are the same as the fields on the Generate Tag Numbers page, except
they are for serial numbers.
Entering the Location for an Item
Access the Inventory Putaway Information page.
If the item that you are receiving was marked as a PeopleSoft Inventory item (and PeopleSoft
Inventory is installed), use this page to record the information that is required to put the item
in inventory. The default information appears from the item definition. Change this
information only if you are storing the item in a different inventory location.
16-10
Status
If the status is Open or Received, you can change the
inventory distribution information that follows. If the
status is Moved, Complete, or Cancelled, you cannot
change that information.
Lot IDs
Click to access the Generate Lot ID’s page, where you can
generate lot numbers. This link appears only if your item
is lot-controlled.
Serial IDs
Click to access the Generate Serial Numbers page, where
you can generate serial numbers. This link appears only if
your item is serial-controlled.
Insert Non-Serial Row
Click to split out non-serialized item row quantities to
different putaway locations. This generates another
putaway row for the same IN unit. You must reduce your
earlier putaway quantities for this unit if you split a
putaway. The total putaway quantity for this unit must
match the total quantity that you've accepted. When an
item is inventory-related, you cannot split a quantity of 1
for a serialized row.
Distribution Line Number
This level of the purchase order records the internal
location where the stock is to be delivered.
Consigned
Select if the stock is defined as consigned goods. The
costs of consigned goods are not recorded until the item is
used or shipped.
Non-Owned Item
Select if the stock is defined as not owned. The costs of
non-owned goods are not recorded unless they are also
marked as consigned goods.
Location Code
Indicates the delivery location within the shipment address
to which this stock should go.
RECEIVING STOCK
AND
RETURNING ITEMS
TO THE
VENDOR
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
You can view and change item information and location in the inventory warehouse.
Sel
Select to display the Insert Non-Serial Row button if you
need to insert a non-serial row number for this row.
Quantity
Enter the quantity for this row. The total of all the rows
must equal the accept quantity on the Receipt Form.
Expire Dte (expire date)
The date that the stock expires. The default date is based
on the item definition; you can change it.
Area
The storage area of the inventory warehouse where this
item will be stored. The default information here is based
on the item defaults. You can change the value.
Click the Search button to access a search page, where
you can select the material storage location for the item in
the inventory warehouse.
Lev 1, Lev 2, Lev 3, Lev 4
(levels 1 through 4)
The levels of the inventory warehouse (subdivisions of the
Area field) in which this item will be stored. The default
information is based on the item defaults. You can change
the value. If PeopleSoft Inventory does not use this field,
it might be blank.
Container
If your inventory system uses container management
(license plating), enter the container ID. This ID can be
assigned later in PeopleSoft Inventory.
See Also
PeopleSoft Inventory PeopleBook, “Structuring Inventory,” Defining and Maintaining
Containers
PeopleSoft Inventory PeopleBook, ”Receiving and Putting Away Stock”
PeopleSoft Inventory PeopleBook, “Managing Consigned Inventory”
Viewing Recorded Receipts
Access the Receipts For [a casual user] page.
The maximum number of rows that are retrieved and displayed on this page can be defined on
the eProcurement Installation Options page. If your search returns more than the defined
number of rows, you receive an error message.
Changes the displayed receipts to include only your
receipts with the displayed status:
Show Status
All: Receipts of any status.
Closed/Cancelled: Receipts that have been closed or
canceled. Closed indicates that the receipt has been
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
RECEIVING STOCK
AND
RETURNING ITEMS
TO THE
VENDOR
16-11
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
completed. No further processing is required.
Moved: Receipts that have been entered, have passed all
edits, and have been sent to PeopleSoft Inventory or Asset
Management.
Received/Open: Receipts with the status Open or
Received. This is the default status.
Click the Details button to access the Receive page, where
you can view and change this receipt.
Click the RTV Setup button to access the Return to
Vendor page, where you can enter the information that is
needed to return the items to the vendor. If this button is
unavailable, the item is an Inventory or Asset
Management item, and you must Move the status of the
receipt before an RTV can be entered.
See Also
“Using PeopleSoft eProcurement Administration,” Setting Up eProcurement Installation
Options
Returning Items to the Vendor
There are several business reasons for initiating a vendor return. You might receive defective
materials, too many items, items that were shipped in error, or items that you no longer
require. When you decide to return goods to your vendor, you must enter an RTV.
This section discusses how to:
16-12
•
Initiate a vendor return.
•
View and change the vendor’s ship to address.
•
View recorded RTV entries.
RECEIVING STOCK
AND
RETURNING ITEMS
TO THE
VENDOR
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Pages Used to Return Items to the Vendor
Page Name
Object Name
Navigation
Usage
Receipts For:
PV_RECV_UPDATE_
REQ
eProcurement, Receive
Items
Add details, return
items to vendor, or
cancel a receipt.
Select items to receive,
and then click the
Receive Selected
button to access the
Receive page.
Click the Inquire
Receipts link on the
Receive page.
Select Receipts to
Return
PV_RTV_PICK_REC
V_W,
PV_RTV_PICK_ASSE
T,
PV_RTV_PICK_PO_
WRK
Click the RTV
Setup button on the
Receipts For page.
Record, change, or
view a return of stock
to a vendor. Use this
page to select receipt
lines to return to
vendor.
Return To Vendor
PV_RTV
Click the Return to
Vendor button at the
top of the Select
Receipts to Return
page.
Return items to a
vendor.
Item Detail
PV_RTV_RECVDS_D
ISP,
PV_RTV_ASSET_DIS
P,
PV_RTV_PO_DS_DIS
P
RTV Fees
PV_RTV_LN_FEE
Click the RTV
Fees button on the
Return to Vendor page.
Record fees that are
incurred for returning
items to the vendor,
including restocking
fees and other charges.
Vendor Address
PV_RTV_ADDR_DT
L
Click the vendor �Go to
Address’ link on the
Return to Vendor page
View or change the
vendor's ship to
address for this return.
Return to Vendor for:
PV_RTV_UPDATE_R
EQ
Click the Inquire
Return to Vendors link
on the Return to
Vendor page.
View RTV entries that
have been recorded
under your user ID.
Click the RTV
Details button on the
Return to Vendor page.
View information
about a requisition, an
item, and previous
returns.
Initiating a Vendor Return
Access the Return To Vendor page.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
RECEIVING STOCK
AND
RETURNING ITEMS
TO THE
VENDOR
16-13
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
You can change the text that appears on this page by using the setup Instructions for the
Return to Vendor page.
Select a reject action for the returned merchandise. Your
selection determines the selections for the other options on
this page. Values are:
Action
Credit (return for credit): The goods are to be returned to
the vendor, and no replacement of these returned goods is
requisitioned.
Exchange (return for exchange): You are returning the
item, and you want a different item to be sent to you. This
option triggers a PeopleSoft Workflow event to a buyer.
Replace (return for replacement): The returned materials
will be received against the original purchase order again,
after the vendor ships replacement goods for the returned
items.
Click the RTV Details button to access the Item Detail
page where you can view information about this
requisition and previous returns.
Click the Return To Vendor Fees button to access the
RTV Fees page where you can enter miscellaneous
charges such as restocking fees.
Ship RTV
Click if you have shipped all the items on this page. This
option sets the shipped quantity on the RTV to equal the
return quantity and changes the RTV status to Shipped.
The RTV status must be Shipped before running the RTV
Reconciliation process.
Ship Via
Select the method of shipment that you are using to ship
the stock back to the vendor.
See Also
“Using Workflow Processes in PeopleSoft eProcurement,” Setting Up and Using Receipt
Notification Workflow
Viewing and Changing the Vendor’s Ship To Address
Access the Vendor Address page.
Note. To change the address, your Roles must contain a user role that is included under
RECV_CASUAL_ALL on the eProcurement Role Actions page.
Use this page if the vendor has a return address that is different from the ordering address.
Return to Vendor,
16-14
RECEIVING STOCK
AND
RETURNING ITEMS
This information appears as the default from the vendor
TO THE
VENDOR
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
Location, Contact
EPROCUREMENT
PEOPLEBOOK
definition and cannot be changed on this page.
See Also
“Using PeopleSoft eProcurement System Administration,” Attaching Role Actions to User
Roles
Viewing Recorded RTV Entries
Access the Return to Vendor for page.
Values are:
Status
Open: The RTV form has been entered and saved.
Shipped: All lines on the return have been shipped. An
RTV line item is considered shipped when the line's Ship
Qty equals the Return Qty.
Closed: All lines on the return are complete. After a
return is closed, you cannot change it.
Cancelled: The RTV has been cancelled. You cannot
change the RTV status to Cancelled if all items on the
RTV have been shipped.
Click the Display RTV Information button to access the
Return to Vendor page, where you can view the
information about the original RTV form. If the RTV
form status is Open, you can change the information.
Receiving Stock As a Power User
In PeopleSoft eProcurement receiving, a power user can perform more actions than a casual
user. A power user has access to many PeopleSoft Purchasing pages that are designed for
receiving department personnel.
This section discusses how to receive stock as a power user.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
RECEIVING STOCK
AND
RETURNING ITEMS
TO THE
VENDOR
16-15
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Used to Receive Stock As a Power User
Page Name
Object Name
Navigation
Usage
Receipts for [a power
user]
PV_RECV_UPDATE
eProcurement, Receive
Items
View previously
recorded receipts, add
new receipts, or update
details, comments,
delivery information,
and ChartField
information.
Your Roles must
contain a user role that
is included under
RECV_POWER on the
eProcurement Role
Actions page.
Receipt Processing
PV_RECV_PROCESS
eProcurement, Receive
Items
Choose how to process
your receipts.
Click the Process
Receipts link.
Inspection
RECV_INSPECT
eProcurement, Receive
Items
Select purchase orders
that require inspection.
Click the Inspection
link.
Return to Vendor
Roster
PV_RTV_UPDATE
eProcurement, Receive
Items
Click the Inquire
Return to Vendor link.
RTV (return to vendor)
RTV
eProcurement, Receive
Items
Click the Inquire
Return to Vendor link,
and then click the Add
RTV link.
RTV Reconcile
RUN_POC5000
eProcurement, Receive
Items
View RTV
information, Add an
RTV, and reconcile an
RTV.
Enter return to vendor
details such as return
quantities and source
information.
Run the RTV reconcile
process.
Click the Inquire
Return to Vendor link,
and then click the
Reconcile RTV link.
16-16
RECEIVING STOCK
AND
RETURNING ITEMS
TO THE
VENDOR
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
Pick Purchase Orders
PO_PICK_ORDERS
eProcurement, Receive
Items
Select purchase orders
that require a receipt.
Click the Add New
Receipt link to access
the Pick Purchase
Order page.
Add or find an existing
value to access this
page.
Receiving
RECV_WPO
eProcurement, Receive
Items
Click the Details
button to access the
Receiving page.
Add a new receipt of
one or more purchase
order lines; reject and
inspect received
quantities.
Before creating a
receipt, verify that your
purchase order was
dispatched.
Activity
RECV_ACTIVITY
eProcurement, Receive
Items
Record comments
about your receipt.
Click the
Comments button to
access the Activity
page.
Delivery Location,
RECV_DELIVERY1
eProcurement, Receive
Items
Record delivery
locations.
Click the
Delivery Information
button.
Location Comments
RECV_DELIVERY2
eProcurement, Receive
Items
Record location
comments.
Click the
Delivery Information
button.
Ship To Comments
RECV_DELIVERY3
eProcurement, Receive
Items
Record ship to
comments for your
receipt.
Click the
Delivery Information
button.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
RECEIVING STOCK
AND
RETURNING ITEMS
TO THE
VENDOR
16-17
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
ChartFields
RECV_ACCOUNT
eProcurement, Receive
Items
Change the way the
shipment is charged to
your accounting
records.
Click the
ChartFields button.
LC Manual Close
CM_LC_MANU_CLO
SE
eProcurement, Receive
Items
Calculate the actual
cost of the item.
Click the Manual
Close Loaded Cost
button to access the LC
Manual Close page.
Viewing Recorded Receipts
Access the Receipts For [a power user] page
The receipt list displays all receipts that have been created for a user ID. Each row represents
a separate line of the receipt so that you can see each item that has been received. If more than
one item was received on the same receipt number, the same receipt number appears in
multiple rows.
16-18
Business Unit
Enter the PeopleSoft eProcurement business unit that was
used to enter the receipts that you want to display.
PO Unit
Enter the Purchasing business unit that was used to enter
the receipts that you want to display.
Add New Receipt
Click to access the Pick Purchase Order page in
PeopleSoft Purchasing where you can select the purchase
order to receive.
Process Receipts
Click this link to access the MarketPlace Processes page
where you can access receiving process in PeopleSoft
Purchasing.
Inspection
Some items require a separate inspection step. If you
receive one of these items, click this link to access the
Select Receipt page in PeopleSoft Purchasing where you
can find the receipt and record the results of your
inspection.
Review ASN Receipt
(review advanced shipment
notification receipt)
Your receipt might be the Advanced Shipment
Notification (ASN), which is sent by the vendor. Click
this link to access the Advanced Shipment Receipt - ASR
Review page in PeopleSoft Purchasing where you can
review the receipts that were created by ASN.
Inquire Return To Vendors
Click to access the Return to Vendor For a Casual User
page where you can view your current RTV forms.
RECEIVING STOCK
AND
RETURNING ITEMS
TO THE
VENDOR
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Click the Details button to access the Receiving page in
PeopleSoft Purchasing where you can view and change
this receipt.
Click the Activities and Comments button to access the
Receipt Activity and Comment - Activity page for receipts
where you can review or change comments about the
receipt.
Click the Delivery Information button to access the
Delivery - Delivery Location page in PeopleSoft
Purchasing. Here, you can review and enter receiving
information related to shipping details such as carrier and
packing slip ID.
Click the ChartFields button to access the Receipt
ChartFields - ChartFields page for receipts in PeopleSoft
Purchasing, where you can view the accounting entries
made at the time of receipt. This shows you the chart of
the accounts that are used to record this receipt; for
example, expense and inventory stock.
Click the Manual Close Landed Cost button to access
the LC Manual Close page in PeopleSoft Purchasing
where you can manually close receiver line charges.
See Also
PeopleSoft Purchasing PeopleBook, “Receiving Shipments”
PeopleSoft Application Fundamentals for FIN, ESA, SCM, “Defining and Using ChartFields”
PeopleSoft Purchasing PeopleBook, “Receiving Shipments,” Working with Landed Cost on
Receipts
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
RECEIVING STOCK
AND
RETURNING ITEMS
TO THE
VENDOR
16-19
CHAPTER 17
Integrating With PeopleSoft HRMS
This chapter provides an overview of the integration between PeopleSoft eProcurement and
PeopleSoft Human Resources Management System (HRMS) and discusses how to:
•
Prepare to use PeopleSoft HRMS integration.
•
Setup Peoplesoft HRMS to PeopleSoft eProcurement synchronization application
messages.
•
Set up publish and subscribe rules for PeopleSoft Resource Management application
messages.
Understanding PeopleSoft eProcurement and HRMS Integration
PeopleSoft eProcurement enables you to use employee information that is stored in the
PeopleSoft HRMS database to create requesters and automatically update PeopleSoft
eProcurement, based on changes to the employee data in the JOB table. The integration is
accomplished with PeopleSoft Application Messaging, which enables you to subscribe to the
JOB record change messages that are published by PeopleSoft HRMS. When changes are
made to the record, they are published, and your PeopleSoft eProcurement system is updated
automatically by your subscription to this message.
The following diagram illustrates the steps for sending and receiving JOB record changes:
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
INTEGRATING WITH PEOPLESOFT HRMS
17-1
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
PeopleSoft
HRMS
Database
JOB record change
PeopleSoft
eProcurement
Application
Message Queue
PeopleSoft
HRMS
Application
Message Queue
JOB Code
Subscription
Publish JOB
change
message
Message Gateway
PV_SYNC
Subscription
Process
Process flow for PeopleSoft eProcurement integration with PeopleSoft HRMS
PeopleSoft HRMS publishes a message when a relevant change is made to the JOB record.
PeopleSoft eProcurement contains a subscription message, WORKFORCE_SYNC, which
reads data from PeopleSoft HRMS. The message contains the subscription PeopleCode
program PV_SYNC, which reads the message data and initiates changes to PeopleSoft
eProcurement based on that data.
PeopleCode can initiate any of the following actions:
New Hire
The new employee’s employee ID (EMPLID) is added to the PeopleSoft eProcurement
database. Also, a new eProcurement requester is created, based on the new employee’s job
code (JOBCODE), and a new user is created in the PeopleSoft database with the roles that are
defined by the employee’s job code.
Change in Employee Job Code
Current roles for the employee are deleted from PeopleSoft eProcurement, and new roles are
established based on the new job code (JOBCODE).
17-2
INTEGRATING WITH PEOPLESOFT HRMS
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Change in Employee Department
The default values in the records REQUESTOR_TBL and OPR_DEF_TBL_PM are changed
to reflect the new value for the new department.
Change in Employee Business Unit
The employee is assigned a new or additional business unit. Changes are made to the operator
(OPRID) values in the records OPR_DEF_TBL_PM, OPR_DEF_TBL_FS, and
REQUESTOR_TBL. Typically the employee’s department also changes, resulting in the
updates that are noted under Change in Employee Department.
Employee Is Terminated, Inactivated, or Activated
When an employee is terminated or inactivated, the Account Locked Out? (ACCTLOCK)
field is altered in the PSOPRDEFN table so that the employee is denied access to the
PeopleSoft eProcurement database. If an inactive employee is activated, the same field is
updated to allow access to eProcurement.
Preparing to Use HRMS Integration
To setup PeopleSoft eProcurement to receive updates from PeopleSoft HRMS:
1. Define your message for publication.
2. Activate your message.
3. Define publication rules.
4. Define chunking rules.
5. Set up PeopleSoft HRMS to PeopleSoft eProcurement Synchronization Application
Messages.
6. Set up publish/subscribe rules for PeopleSoft eProcurement application messages.
7. Activate the Full Sync Messages.
Run the following messages:
JOBCODE_FULLSYNC.
WORKFORCE_FULLSYNC.
PERSON_BASIC_FULLSYNC (optional).
These messages update the following PeopleSoft eProcurement tables:
EE Personal Data (employee personal data) (PERSONAL_DATA).
EE General Employment Data (EMPLOYMENT).
EE Job History (JOB).
8. Assign roles to job codes on the Detail Jobcode/Role Definition page.
9. Run the PV_USERS process on the Load OprIDs and Roleusers Page (load operator IDs
and role users page).
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
INTEGRATING WITH PEOPLESOFT HRMS
17-3
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
10. Deactivate the Full Sync Messages.
11. Activate the Incremental Sync Publication Messages.
See Also
PeopleSoft Enterprise Integration PeopleBook, “Activating Application Messaging EIPs,”
Setting up PeopleSoft Application Messaging EIPs
PeopleSoft Enterprise Integration PeopleBook, “Activating Application Messaging EIPs,”
Setting Up Publication Rules
PeopleSoft Enterprise Integration PeopleBook, “Activating Application Messaging EIPs,”
Setting Up Message Chunking
PeopleSoft Enterprise Integration PeopleBook, "Introducing Enterprise Integration Points"
Understanding the EIP Catalog
Setting Up HRMS to eProcurement Synchronization Application
Messages
PeopleSoft eProcurement uses PeopleSoft Application Messaging to integrate employee tables
with PeopleSoft HRMS application tables. The application messages are delivered with a
status of Inactive. You must activate each application message before attempting to publish or
subscribe to messages. The messages that are published by PeopleSoft HRMS must be
activated in that database, and the messages to which PeopleSoft eProcurement subscribes
must be activated in the PeopleSoft FDM database.
Before activating your application message, you define the databases and routing in your
system.
See Also
PeopleSoft Enterprise Integration PeopleBook, “Activating Application Messaging EIPs,”
Setting up PeopleSoft Application Messaging EIPs
Setting Up Publish and Subscribe Rules for PeopleSoft Resource
Management Application Messages
PeopleSoft eProcurement application messages are delivered with the status Inactive.
PeopleSoft HRMS database information that is shared by PeopleSoft eProcurement in the
PeopleSoft FDM database is updated properly when the appropriate messages are activated.
When updating information between databases, PeopleSoft Application Messaging imposes
the following publish and subscribe rules:
•
17-4
Full Table Publish
INTEGRATING WITH PEOPLESOFT HRMS
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
This rule erases all data from the target table and replaces it with data from the source
table.
•
Incremental Table Publish
This rule captures the addition, change, or deletion of data that is performed in the source
database and either inserts a new row of data or deletes or updates the corresponding row
of data in the target database.
PeopleSoft eProcurement subscribes to data changes from the PeopleSoft HRMS database. It
does not publish to HRMS (except for the ENTERPRISE_SETUP message). Also, PeopleSoft
eProcurement does not subscribe to any full table data changes, but only to incremental target
row data changes.
For example, PeopleSoft eProcurement subscribes to data from the HRMS JOB table. The
JOB table populates with new data from the PeopleSoft HRMS JOB table, and the old data is
deleted. The data from the JOB table is published in the message WORKFORCE_SYNC.
When using PeopleSoft Application Messaging, changes that are made in PeopleSoft HRMS
update PeopleSoft eProcurement. For example, the WORKFORCE_SYNC message enables
PeopleSoft HRMS to update the master list of employee job rows that is used by PeopleSoft
eProcurement to build requesters. Various other messages enable PeopleSoft eProcurement to
keep current with the changes that are made to the employee personal data, job, and other
HRMS tables.
Setting Incremental Table Publish Rules for PeopleSoft eProcurement
PeopleSoft eProcurement requires that the PeopleSoft HRMS Incremental Sync Publication
Messages for PeopleSoft eProcurement have a status of Active. These messages need to be
activated in PeopleSoft HRMS so that they will publish to eProcurement.
Note. The routing direction for all of the PeopleSoft HRMS messages to which PeopleSoft
eProcurement subscribes must be—at least— set to Publish. However, you might also have
the routing direction set to Publish/Subscribe, depending other HRMS applications that your
organization has installed.
PeopleSoft HRMS Incremental Sync Publication Messages for PeopleSoft
eProcurement
The following messages are necessary for PeopleSoft eProcurement:
Message Name/Subscribe
Rule ID
Routing
Direction
Message
Node
Message
Channel
Records in Message
and EIP Description
JOBCODE_SYNC
PUBLISH
PSFT_EP
PERSON_SET
UP
JOBCODE_TBL:
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
Master list of job
codes
INTEGRATING WITH PEOPLESOFT HRMS
17-5
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Message Name/Subscribe
Rule ID
Routing
Direction
Message
Node
Message
Channel
Records in Message
and EIP Description
PERSON_BASIC_SYNC
PUBLISH
PSFT_EP
PERSON_DATA
PERSONAL_DATA,
EMAIL_ADDRESSE
S,
PERSONAL_PHONE
,
PERS_DATA_EFFD
T, PERS_ND:
List of employees and
contractors with
corresponding email
addresses, phone
numbers, effectivedated history of
changes to the
PERSONAL_DATA
record and national
IDs.
WORKFORCE_SYNC
PUBLISH
PSFT_EP
PERSON_DAT
A
EMPLOYMENT,
JOB
Workforce data
regarding each
resource’s
employment and job.
PeopleSoft eProcurement Incremental Sync Publication Messages
Message Name/Subscribe
Rule ID
Routing
Direction
Message
Node
Message
Channel
Records in
Message and EIP
Description
JOBCODE_SYNC
SUBSCRI
BE
PSFT_HR
PERSON_SETU
P
JOBCODE_TBL:
SUBSCRI
BE
PSFT_HR
PERSON_DAT
A
EMPLOYMENT,
JOB:
WORKFORCE_SYNC
Master list of job
codes.
Workforce data
regarding each
resource’s
employment and job.
Setting Full Table Publish Rules for PeopleSoft eProcurement
PeopleSoft eProcurement is delivered with all Full Table Publish rules set to Inactive.
17-6
INTEGRATING WITH PEOPLESOFT HRMS
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Note. The messages in the preceding tables should not be activated unless your organization
is performing an initial implementation, and no actual data exists in your FDM database.
Warning! If you change the status of these messages to Active, the data in your FDM
database will be overwritten. Do not activate the FULL_SYNC versions of the messages in
HRMS or FDM unless you intend to overwrite all the data in the target tables.
PeopleSoft HRMS to PeopleSoft eProcurement Full Sync Messages
PeopleSoft eProcurement maintains these messages with a status of Inactive:
Message Name/Publish Rule
ID
Routing
Direction
Message
Node
Message
Channel
Records in Message
and EIP Description
JOBCODE_FULLSYNC
SUBSCRI
BE
PSFT_EP
PERSON_SET
UP
JOBCODE_TBL:
SUBSCRI
BE
PSFT_EP
PERSON_DAT
A
PERSONAL_DATA,
EMAIL_ADDRESSE
S,
PERSONAL_PHONE
,
PERS_DATA_EFFD
T, PERS_NID:
PERSON_BASIC_FULLSYN
C
Master list of job
codes.
List of employees and
contractors with
corresponding email
addresses, phone
numbers, effectivedated history of
changes to the
PERSONAL_DATA
record and national
IDs.
WORKFORCE_FULLSYNC
SUBSCRI
BE
PSFT_EP
PERSON_DAT
A
EMPLOYMENT,
JOB:
Workforce data
regarding each
resource’s
employment and job.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
INTEGRATING WITH PEOPLESOFT HRMS
17-7
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
PeopleSoft eProcurement Full Sync Subscription Messages
Message Name/Subscribe
Rule ID
Routing
Direction
Message
Node
Message
Channel
Records in
Message and EIP
Description
JOBCODE_FULLSYNC
SUBSCRI
BE
PSFT_HR
PERSON_SETU
P
JOBCODE_TBL:
SUBSCRI
BE
PSFT_HR
PERSON_DAT
A
PERSONAL_DATA
,
EMAIL_ADDRESS
ES,
PERSONAL_PHON
E,
PERS_DATA_EFFD
T, PERS_NID:
PERSON_BASIC_FULLSYN
C
Master list of job
codes.
List of employees
and contractors with
corresponding email
addresses, phone
numbers, effectivedated history of
changes to the
PERSONAL_DATA
record and national
IDs.
WORKFORCE_FULLSYNC
SUBSCRI
BE
PSFT_HR
PERSON_DAT
A
EMPLOYMENT,
JOB:
Workforce data
regarding each
resource’s
employment and job.
17-8
INTEGRATING WITH PEOPLESOFT HRMS
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CHAPTER 18
Implementing Item Searches
This chapter provides an overview of item searches in eProcurement and discusses how to:
•
Implement the Verity search engine.
•
Create and update the Verity search collection.
•
Implement item attribute searches.
•
Import and work with attributes.
Understanding Item Searches
Item searches on the Search Catalog and Advanced Search pages enable users to locate
requested items quickly and easily. The choice of search engine is made on the eProcurement
Installation Options page.
PeopleSoft eProcurement includes the Verity search engine, which offers faster searches and
advanced search options, including the use of Boolean operators.
See Also
Implementing Item Attribute Searches
Implementing the Verity Search Engine
The Verity search engine provides Price Range and Model as optional search fields. In
addition, you can:
•
Use synonyms for searches.
•
Match cases.
Verity provides faster searches by indexing item catalog data into a Verity collection.
Searches are then performed against this collection. You can use either batch updates/rebuild
or online incremental updates to build Verity index collections.
The Verity collection is built using the PeopleSoft Application Engine process
PV_SRCH_INDX, which is accessible from the Build Verity Collection page. This process
extracts data from the item catalog tables and writes a few intermediate text files: the BIF files
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
IMPLEMENTING ITEM SEARCHES
18-1
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
and the DAT files. These files are indexed into the Verity collection, which comprises
multiple file folders.
Depending on the language and run control parameters, Verity extracts item data from
PV_VERITY_SR_VW, PV_VERITY_SR_LW, PV_VERITY_NR_VW,
PV_VERITY_NR_LW.
Tree node and tree name information is retrieved from the PV_CAT_TREE_TBL and is
indexed into the collection when running PV_SRCH_INDX.
Verity Incremental Updates
Incremental updates provide online updates for items that are added, updated, or inactivated in
the Item Definition, Item Approval, Item Copy, and Purchasing Attributes components. With
Verity incremental updates, you can set up a DAEMON process that automatically updates
index values during a specified time interval.
Use the Maintain Verity Online Update Fields page to activate or inactivate your inventory
and purchasing Verity index fields. When any of the active fields specified on
PV_VER_IDX_FLDS are changed in the Item Definition, Item Approval, Item Copy, or
Purchasing Attributes components, data is immediately stored in staging table
PV_VER_UPD_STG.
There are two ways to update the Verity Collection from PV_VER_UPD_STG:
•
Use the “Process Online Updates” option on the Build Verity Collection run control page.
•
Setup and use the PV_SRCH_DAEM Verity Search Updates Daemon process. This AE
program will be run at specified time-interval. It calls the Verity Indexing program:
PV_SRCH_INDX to update all data stored in the staging table.
Fields indexed into the collection are:
18-2
Field Name
Long Name
SETID
SetID
INV_ITEM_ID
Item ID
VENDOR_SETID
Vendor SetID
VENDOR_ID
Vendor ID
CATEGORY_ID
Category ID
UNIT_MEASURE_STD
Standard Unit of Measure
DESCR
Description (30-character maximum)
DESCR60
Description (60-character maximum)
ITM_ID_VNDR
Vendor Item ID
VNDR_CATALOG_ID
Vendor’s Catalog Number
TREE_NAME
Tree Name
PRICE_LIST
Price List
IMPLEMENTING ITEM SEARCHES
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
Field Name
Long Name
VNDR_LOC
Vendor Location
PRICE_VNDR
Vendor Price
CURRENCY_CD
Currency Code
MFG_ID
Manufacturer ID
MFG_ITM_ID
Manufacturer’s Item ID
MFG_NAME
Manufacturer Name
VNDR_NAME1
Vendor Name
MODEL
Model
ITM_VNDR_PRIORITY
Item Vendor Priority
DESCR254_MIXED
Description (254-character maximum)
EPROCUREMENT
PEOPLEBOOK
This section discusses how to:
•
Enable the Verity search engine.
•
Configure Tuxedo IPC Helper Service for multiple NT servers.
See Also
Enabling the Verity Search Engine
Follow these steps to set up the Verity search engine:
1. Open up the application server configuration file in a text editor (psappsrv.cfg) and add
the following Search Index path under the [Search Indexes] section:
FDM_PV_ITEMCATALOG = [Collection File Path]
[Collection File Path] is the directory path that will be used to store the Verity collection
files. This directory must be shared if multiple application servers are accessing the same
path.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
IMPLEMENTING ITEM SEARCHES
18-3
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Application Server Configuration
2. Open up the process scheduler server configuration file in a text editor (psprcs.cfg). Copy
the [Search Indexes] section from the application server configuration file and paste it
near the end of the psprcs.cfg file.
18-4
IMPLEMENTING ITEM SEARCHES
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Process Scheduler Server Configuration
3. Enter the search index path specified in the application configuration file in the Collection
File Path field on the Build Verity Collection page.
4. If you are using Windows NT and want multiple application servers to share the same
collection, configure the Tuxedo IPC Helper service for each server.
5. Create and configure a process scheduler to run on the application server where the
indexing process will be run.
6. Verify that 10 style files exist in this directory:
$ps_home\data\search\FDM_PV_ITEMCATALOG\style.
If they do not, copy the style files from
$PeopleSoft_home\data\search\portal\style\directory.
7. Navigate to the Build Verity Collection page and create your collection for the first time
by using the “Create New/Rebuild Collection” option on that page and running the
process for your platform.
Note. It is important that the “Update/Reload Tree Table” check box is checked if this is
your first time building the collection. This option should also be used whenever there are
changes to your tree data. However, if no tree data has been changed since the last time
you your process was run, uncheck the check box to improve performance of the indexing
process.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
IMPLEMENTING ITEM SEARCHES
18-5
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
8. Use search type “VST”—on the eProcurement Installation Options page—to activate
Verity as the search engine for item searching, and activate the tree table
PV_CAT_TREE_TBL for item browsing.
Note. The PV_CAT_TREE_TBL tree table must be populated for Verity searching.
9. Use the Build Verity Collection page to schedule the process to periodically update or
rebuild your item catalog collection.
Configuring Tuxedo IPC Helper Service for Multiple NT Servers
To have several NT servers share the same Verity collection, configure the Tuxedo IPC
Helper service for each server.
To set the configuration:
1. Navigate to Start, Settings, Control Panel, Services.
2. Double-click TUXEDO IPC Helper to open the Service dialog box.
3. In the Log On As area, select This Account and enter your network logon ID and
password.
4. Click OK to save this information.
Service dialog box
18-6
IMPLEMENTING ITEM SEARCHES
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Creating and Updating the Verity Search Collection
This section discusses how to:
•
Create and update the Verity search collection.
•
Maintain Verity incremental updates.
•
Setting up and running the Verity search updates Daemon program.
Page Used to Create or Update the Collection
Page Name
Object Name
Navigation
Usage
Build Verity Collection
PV_SRCH_RUN_IND
EX
eProcurement,
Procurement
Application
Administration
Create or update the
Verity search
collection.
Access is limited to
users with the
eProcurement action
role System_Admin.
Click the Run
eProcurement
Processes link.
Click the Requisitions
Processes link.
Click the Build Verity
Collections link to
access the Build Verity
Collections page.
Maintain Verity Online
Update Fields
PV_VER_IDX_FLDS
eProcurement,
Procurement
Application
Administration
Activate/Inactivate
fields that trigger
incremental updates for
items that are added,
updated, or inactivated.
Click the Maintain
Items link.
Click the Verity Online
Update Fields link to
access the Maintain
Verity Online Updates
Fields page.
Creating and Updating the Verity Search Collection
Access the Build Verity Collection page.
Create New/Rebuild
Collection
Select to create a brand new collection or rebuild an
existing collection.
Update All Items for a
Select to allow data entry for the vendor setID and up to
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
IMPLEMENTING ITEM SEARCHES
18-7
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Vendor
three specific vendor fields.
Update Specific SetID/Items
Select to allow data entry for the item setID and a specific
range of items to update.
Process Online Updates
Select to immediately process all updates that have been
processed online since the last Online Update Process or
Daemon Update Process.
Optimize Collection
Select to consolidate and clean up the Verity Index files
and speed up the search process. This option should be
used after the collection is updated many times.
Collection File Path
Enter the directory path where the collection will reside.
Note. Select any path, but make sure that the collection is
accessible to all applications servers and the process
scheduler server running this process.
Currency Code
Select a currency in which to build the collection.
Currency conversion is performed during item search, and
prices appear in their original currency in search results.
On the Process Scheduler Request page, select Verity Search Indexing (PV_SRCH_INDX).
Setting Up and Running the Verity Search Update Daemon Program
To setup the Verity Search Update Daemon Program:
1. Create a new Daemon group under PeopleTools, Process Scheduler, Daemon Group.
a. Add a new Daemon Procedure Group: PVDAEMON.
b. Select Program Name: PV_SRCH_DAEM.
c. Save the Daemon Group.
2. Setup the Process Scheduler Server under PeopleTools, Process Scheduler, Servers.
a. Select the process scheduler server to edit.
b. On the Daemon tab, select the Daemon Group: PVDAEMON.
c. Select the Daemon Enabled check box.
d. Specify the Daemon Sleep Time.
e. Save the changes.
3. Clear up the Process Scheduler cache and re-start the process scheduler. The Daemon
process starts automatically. You can view a log of the process on the Process Monitor Server List page.
Implementing Item Attribute Searches
PeopleSoft eProcurement enables you to associate attributes with categories to make item
searches more precise. Once item attribute searches are implemented, you can select one or
18-8
IMPLEMENTING ITEM SEARCHES
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
more categories on the Advanced Search page and search on the attributes for your selected
categories, including their children.
Implementing Searches
Search implementation involves these steps:
1. Import attributes to the staging table.
2. Verify the imported attributes.
3. Designate cross-references for attribute names and units of measure.
4. Load attributes from staging.
5. Maintain MarketPlace category attributes and item attributes.
Tables for Attributes and Categories
The category attributes for item attribute searches are stored in table PV_CAT_ATTR_TBL,
which includes these fields:
SETID
(key field)
CATEGORY_TYPE
(key field)
CATEGORY_CD
(key field)
CATEGORY_ID
(key field)
ATTRNAME
(key field)
LANGUAGE_CD
(key field)
DESCR
UOM_ATTR
(Assuming that ISO standard UOM is used.)
Note. You might need to add units of measure to your system or
convert units of measure.
FLAG
PEOPLESOFT PROPRIETARY
(numeric flag)
AND
CONFIDENTIAL
IMPLEMENTING ITEM SEARCHES
18-9
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Example: Category Attributes in PV_CAT_ATTR_TBL
Item attributes for the item attribute search are stored in table PV_ITM_ATTR_TBL, which
includes:
SETID
(key field)
INV_ITEM_ID
(key field)
ATTRNAME
(key field)
ATTRVALUE
(character field)
UOM_ATTR
PV_ATTRVALUE
(numeric field)
Example: Item Attributes in PV_ITM_ATTR_TBL
18-10
IMPLEMENTING ITEM SEARCHES
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Process Flow for Importing, Staging, and Loading Attributes
CSV File
Item
attributes
LoadStageTable
function is called for
each item.
CUP
Run
PV_ATTR_LOAD
Import Attributes to Stage
User populates Xref
and conversion tables
as needed.
Populates tables.
AE Program checks
these tables.
PV_CAT_ATTR_XRF,
UNITS_TBL,
UNITS_CVT_TBL
PV_CAT_ATTR_TBL
PV_ITM_ATTR_TBL
Importing, Staging, and Loading Attributes for Item Attribute Searches
Attribute Names and UOM Variations
•
If your item load creates redundant attribute names for a category, designate crossreferences for the attribute names.
For example, you might have a category called Office Supplies with items that use both
WGT and WEIGHT as attribute names for weight.
•
If your item load creates redundant unit of measure names for an attribute in a
category, cross-reference the unit of measure names.
PeopleSoft eProcurement provides table PV_CAT_ATTR_XRF for cross-referencing attribute
names and units of measure. It contains these fields:
SETID
(key field)
CATEGORY_TYPE
(key field)
CATEGORY_ID
(key field)
CATEGORY_CD
(key field)
ATTRNAME
(key field; original attribute name or attribute UOM)
PV_ATTRNAME
(convert to new attribute name or attribute UOM)
UNIT_OF_MEASURE
(base UOM)
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
IMPLEMENTING ITEM SEARCHES
18-11
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Use the Attribute Name Cross-Reference Page to create cross-references for attribute and unit
of measure names.
See Also
PeopleSoft PeopleTools PeopleBook: Tree Manager, “Introduction to Tree Manager”
PeopleSoft PeopleTools PeopleBook: Cube Manager, “Designing Cubes,” Designing
Attribute Names
Importing and Working With Attributes
This section discusses how to:
•
Import attributes from a flat file.
•
Verify imported attributes.
•
Assign cross-references to attribute names.
Pages Used to Import and Work With Attributes
Page Name
Object Name
Navigation
Usage
Import Attributes
PV_ATTR_IMPORT
eProcurement,
Procurement
Application
Administration
Stage attributes to
eProcurement from a
flat file as the first step
in integrating the
attributes into searches.
Click the Maintain
Merchant Integration
link.
Click the Import
Attributes link to
access the Import
Attributes page.
Attributes Staging
Table - Item Attributes,
Mfg (manufacturer)
and Category , and
Status
PV_ATTR_LOAD_ST
G
eProcurement,
Procurement
Application
Administration
Access is limited to
users with the
eProcurement action
role System_Admin.
Verify attributes
imported into the
Import Attributes page.
Click the Maintain
Merchant Integration
link.
Access is limited to
users with the
eProcurement action
role System_Admin.
Click the Attributes
Staging Table link to
access the Attributes
Staging Table page.
18-12
IMPLEMENTING ITEM SEARCHES
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
Stage
PV_ATTR_RUN_LO
AD
Load Attributes link on
the Maintain Merchant
Integration page.
Import attributes from
the Attributes Staging
Table page.
Access is limited to
users with the
eProcurement action
role System_Admin.
Attribute Name Cross
Reference
PV_CAT_ATTR_XRF
Attribute Name Cross
Reference link on the
Maintain Merchant
Integration page.
Assign new crossreferences to attribute
names; assign base
UOMs for attributes.
Access is limited to
users with the
eProcurement action
role System_Admin.
Category Attributes
PV_SRCH_CAT_ATT
R
Category Attributes
link on the Maintain
Merchant Integration
page.
Edit category attributes
that have been
imported from
MarketPlace.
Access is limited to
users with the
eProcurement action
role System_Admin.
Item Attributes
PV_SRCH_ITM_ATT
R
Item Attributes link on
the Maintain Merchant
Integration page.
Verify and edit item
attributes imported
from MarketPlace.
Access is limited to
users with the
eProcurement action
role System_Admin.
Importing Attributes From a Flat File
Access the Import Attributes page.
The most typical data load consists of MarketPlace items, but you can import attributes from
any properly formatted text file.
SetID
Select a setID from the available options. If the flat file
has no setID, select SHARE.
File Type
Select Comma Delimited for text files.
File Directory
Enter the directory where the flat file is located.
Note. The fields included in this directory are listed
following these field descriptions.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
IMPLEMENTING ITEM SEARCHES
18-13
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Import Attributes
Click to import the flat file to eProcurement.
Attribute Staging Table
Click to access the Attributes Staging Table page, where
you can verify the attributes that you have imported.
File Directory Fields
These fields are in the File Layout PV_ATTR_LOAD _COMMA. The fields that are marked
with an asterisk (*) are required, with the following exceptions:
•
SETID is required only if you have not selected a setID on this page.
•
INV_ITEM_ID or MFG_ID and MFG_ITEM_ID is required unless you include
values for PV_CV_SPN and PV_CV_PART_EXT.
*SETID
*INV_ITEM_ID
*ATTRNAME
*LANGUAGE_CD
PV_CV_SPN
PV_CV_PART_EXT
*MFG ID
*MFG ITEM ID
CATEGORY_TYPE
CATEGORY_CD
CATEGORY_ID
*DESCR
*ATTRVALUE
UOM_ATTR
These fields are comma-delimited with no additional spaces (empty fields must also be
delimited).
For multi-languages, the only field that should be translated is Attribute Description, DESCR.
The Attribute Name field, ATTRNAME, must be the same across all languages for the same
attribute.
Example
SHARE,10012,WEIGHT,ENG,,,BIKE-01,BIKE-ITM-12,,,,Weight,10,LBS
SHARE,10013,LEN,ENG,,,BIKE-01,BIKE-ITM-13,,,,Length,5,IN
SHARE,10014,WGT,ENG,,,BIKE-01,BIKE-ITM-14,,,,Weight,12,KG
18-14
IMPLEMENTING ITEM SEARCHES
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
SHARE,10014,WIDTH,ENG,,,BIKE-01,BIKE-ITM-14,,,,Width,6,IN
SHARE,10015,LEN,ENG,,,BIKE-01,BIKE-ITM-15,,,,Length,10,FT
SHARE,10015,COLOR,ENG,,,BIKE-01,BIKE-ITM-15,,,,Color,RED,
SHARE,10015,WEIGHT,ENG,,,BIKE-01,BIKE-ITM-15,,,,Weight,5,OZT
Verifying Imported Attributes
Access the Attributes Staging Table page
Note. Multiple views of this page are available by clicking the tabs in the scroll area.
There is no need to edit the imported values on this page unless you are required to crossreference attributes or unit of measure names. For large amounts of data, use the Attribute
Name Cross Reference page or manually convert the units of measure.
When cross-referencing names or converting units of measure, you may receive a warning
message advising that multiple units of measure have been imported for one category.
Resolve the conflict by designating a base UOM on the Attribute Name Cross Reference page.
If you are importing units of measure that do not already exist in your system, you will receive
a warning message. To add new units of measure, go to the Units of Measure page.
MFG and Category Tab
Access the Attributes Staging Table - Mfg and Category tab.
Note. The fields on this page are populated with the imported values.
Status Tab
Access the Attributes Staging Table - Status tab.
Values are:
Processed
N: Attribute is not loaded.
Y: Attribute is loaded.
E: ErrorпЈ§attribute cannot be loaded or has been loaded
with assumptions about the unit of measure.
Note. Attributes are loaded on the Load Attributes from
Stage page.
Error Message
If one of these messages appears, you can use the Units of
Measure page to add units of measure or create
conversions for units of measure:
ГЃ
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
UOM Conversion Rate Not Defined. 1 to 1
Conversion Assumed.
IMPLEMENTING ITEM SEARCHES
18-15
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
ГЃ
Invalid Unit of Measure. Attribute Not Loaded.
Assigning Cross-References to Attribute Names
Access the Attribute Name Cross Reference page
If you have redundant attribute or unit of measure names, establish cross-references so that the
system can refer to one standard name. Cross-references enable you to establish one name for
each attribute and one name for each unit of measure within a category.
New Attribute Name
Select an attribute name for cross-referencing the selection
in the Attribute Name field. If you are creating a UOM
cross-reference, leave this field blank.
Base UOM
Select a base UOM for the new attribute name. The name
must exist in the UOM table and there must be a
conversion for the UOM. You can create a conversion on
the Units of Measure page.
Note. For each category you use, only one unit of measure is allowed for each attribute. For
example, for the attribute Length, you cannot use both inches and feet as the unit; however,
you can use inches in one category and feet in another.
18-16
IMPLEMENTING ITEM SEARCHES
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CHAPTER 19
Cohera Catalog Management
Integration
This chapter provides an overview of the Cohera Catalog Management System integration and
discusses how to:
•
Integrate the Cohera Catalog Management System with PeopleSoft eProcurement.
•
Load Cohera catalogs into PeopleSoft eProcurement.
Understanding the Cohera Integration
PeopleSoft eProcurement integrates with the Cohera Catalog Management System to create a
robust and centrally located catalog management system that aggregates, cleanses, categorizes,
manages, and publishes single-source content throughout your organization. Cohera
technology accesses XML data from PeopleSoft eProcurement or other database sources and
reproduces it as though the data comes from a single database.
With the Cohera Catalog Management System, your organization can:
•
Load or update items from Cohera catalogs into PeopleSoft eProcurement catalogs
and use those items on eProcurement requisitions and purchase orders.
•
Store catalog information in a central repository.
•
Cleanse and categorize data so that it appears the same for all applications.
•
Provide catalog access to various groups and partners at all times.
•
Maintain content across the enterprise.
Loading Cohera Catalog Items Into PeopleSoft eProcurement
Once you set up your connections to the Cohera Catalog Management System, you can load
items from the Cohera catalogs into PeopleSoft eProcurement. These items can be entered on
eProcurement requisitions and purchase orders. After you load the items, you should schedule
regular updates to capture changes such as price fluctuations, discontinuation of items, or
addition of new items.
The following diagram illustrates the process of loading Cohera items into the PeopleSoft
eProcurement item stage table:
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
COHERA CATALOG MANAGEMENT INTEGRATION
19-1
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Loading Cohera items into the PeopleSoft eProcurement staging table
Prerequisites
Before integrating the Cohera Catalog Management System with PeopleSoft eProcurement, all
linked suppliers that are used in eProcurement must be set up as eProcurement vendors.
See Also
PeopleSoft Setting Up Procurement Options PeopleBook, “Maintaining Vendor Information,”
Entering Vendor Information
Common Element Used in This Chapter
Catalog Name
19-2
COHERA CATALOG MANAGEMENT INTEGRATION
Select the name of the Cohera catalog to import. Catalog
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
name values appear as defaults from the catalog values
that are specified on the Configure Cohera Connection
page.
Integrating the Cohera Catalog Management System With
PeopleSoft eProcurement
This section discusses how to:
•
Setup the database connection to Cohera.
•
Configure the Cohera connection.
•
Set up Cohera suppliers as linked suppliers.
Pages Used to Integrate the Cohera Catalog Management System With
PeopleSoft eProcurement
Page Name
Object Name
Navigation
Usage
Configure Cohera
Connection
PO_CO_CONFIG
Setup Financial/Supply
Chain Management,
Product Related,
Procurement Options
ePro, Content
Management, Content
Management Home
Establish the database
connection between
PeopleSoft
eProcurement and
Cohera Catalog
Management.
Click the Cohera
Catalog Management
link on the Content
Management Home
page.
Click the Cohera - ePro
Configuration link on
the Cohera Catalog
Management page.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
COHERA CATALOG MANAGEMENT INTEGRATION
19-3
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
Linked Supplier Setup
PV_MS_SEC_SUPPLI
ER
Setup Financial/Supply
Chain Management,
Product Related,
Procurement Options
ePro, Content
Management, Content
Management Home
Set up Cohera suppliers
as suppliers.
Click the Manage
Supplier link on the
Content Management
Home page.
Click the Linked
Suppliers link on the
Manage Suppliers
page.
Setting Up the Database Connection to Cohera
Note. A catalog must be created in the Cohera Catalog Management System before you can
establish a database connection between PeopleSoft eProcurement and Cohera.
Following are steps for setting up the database connection to Cohera:
1. Navigate to the Configure Cohera Connection page, and specify the database connection
between Cohera and PeopleSoft eProcurement.
The eProcurement application engine directly reads the Cohera tables established for this
connection.
2. Add PeopleSoft linked suppliers as PeopleSoft vendors, using the Vendor Information
component.
3. Set up Cohera suppliers as suppliers on the Linked Supplier Setup page.
Configuring the Cohera Connection
Access the Configure Cohera Connection page.
19-4
Same Server
Select this option if the Cohera and eProcurement servers
are the same.
Get Catalogs
Click to retrieve Cohera Non-UNSPSC catalog items.
Type
The default is UNSPSC, based on the Cohera catalog
structure. You can manually override this option.
COHERA CATALOG MANAGEMENT INTEGRATION
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Setting Up Cohera Suppliers As Linked Suppliers
Access the Linked Supplier Setup page.
Use this page to also establish Cohera suppliers as eProcurement vendors. You can set up this
cross-reference by selecting an eProcurement vendor location and Cohera supplier (Linked
Supplier ID) and name (Linked Supplier Name).
Loading Cohera Catalogs Into PeopleSoft eProcurement
This section discusses how to:
•
Extract data from Cohera tables.
•
Import Cohera Categories.
•
Load Cohera catalogs.
•
Validate and process imported items.
•
Load staged items.
Following are the steps for loading Cohera categories and items into PeopleSoft
eProcurement.
1. Extract data from the Cohera tables by using the category update and creation process
(PV_CO_CAT_IN).
2. Import Cohera categories using the PV_CO_CAT_IMPORT process.
Note. This process is only for Non-UNSPSC items.
Import the product, category, and price files to PeopleSoft eProcurement, using the Import
CUP File process (PV_CP_IMPORT_RUN). This PeopleSoft Application Engine process
loads the product and category flat files into the PV_CP_LOAD and PV_CP_CAT_TMP
staging tables.
Note. This process is only for UNSPSC items.
3. Use the Validate and Process Imported Items page to validate the CUP file data in the
staging tables, adding or changing information as necessary.
4. Run the Load Staged Items process (PV_CP_ITM_LOAD).
This process loads items from the staging tables into the PeopleSoft item master tables.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
COHERA CATALOG MANAGEMENT INTEGRATION
19-5
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Pages Used to Load Cohera Catalogs Into PeopleSoft eProcurement
Page Name
Object Name
Navigation
Usage
Import Cohera
Categories
PV_CO_CAT_IMPOR
T
Setup Financial/Supply
Chain Management,
Product Related,
Procurement Options
ePro, Content
Management, Content
Management Home
Specify the category
hierarchy that is
sourced from Cohera to
eProcurement.
Click the Cohera
Catalog Management
link on the Content
Management Home
page.
Click the Import
Category Data link on
the Cohera Catalog
Management page.
Import Item Catalogs
PV_CP_IMPORT_RU
N
Setup Financial/Supply
Chain Management,
Product Related,
Procurement Options
ePro, Content
Management, Content
Management Home
Load Cohera catalogs.
Click the Cohera
Catalog Management
link on the Content
Management Home
page.
Click the Import Item
Data link on the
Cohera Catalog
Management page.
Validate and Process
Imported Items
PV_CP_VALIDATE
eProcurement,
Procurement
Application
Administration
Click the Maintain
Merchant Integration
link.
Review and change the
item data loaded by the
Import Catalog process
into the staging tables
PV_CP_LOAD and
PV_CP_CAT_TMP.
Click the Validate and
Process Imported Items
link.
19-6
COHERA CATALOG MANAGEMENT INTEGRATION
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Page Name
Object Name
Navigation
Usage
Load Staged Items
PV_CP_ITM_LOAD
Click the Load Staged
Item button on the
Validate and Process
Imported Items page.
Load the data from the
PV_CP_LOAD and
PV_CP_CAT_TMP
staging tables to the
production tables for
PeopleSoft items.
Extracting Data From Cohera Tables
The category update and creation process (PV_CO_CAT_IN) retrieves category information
from the appropriate Cohera tables and loads that information into the PeopleSoft
eProcurement category load staging table.
After the Category and Update process is complete, a second application program
(PV_CP_LOAD) retrieves Cohera item information and populates the PeopleSoft
eProcurement Item Loader staging table.
PeopleSoft retrieves the following information from the Cohera file:
Cohera Tables
Description
CWB_PRODUCT_CATEGORIES
Category
CWB_SUPPLIER_PRODUCTS
Supplier product
CWB_CATEGORIES
Supplier categories
CWB_ CATEGORY_HIERARCHY
Category hierarchy
CWB_SUPPLIER_PRODUCT_ATTRIBUTES
Attributes
Importing Cohera Categories
Access the Import Cohera Categories page.
The Category ID field is required for all PeopleSoft items. You must import categories prior
to importing Cohera catalog items into PeopleSoft eProcurement.
Non-UNSPSC categories must be loaded first. You can not import UNSPSC items using this
same process. You can import UNSPSC categories along with items, however, only UNSPSC
categories that use your items will be created.
Item SetID
Enter the ID that is used to store the Cohera hierarchy.
Tree Name
Enter the tree name that is used to store the Cohera
hierarchy.
Account
Specify the account that is used on every imported Cohera
category.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
COHERA CATALOG MANAGEMENT INTEGRATION
19-7
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Loading Cohera Catalogs
Access the Import Item Catalogs page.
Import Items Catalog page
The product and price files are loaded into the staging tables PV_CP_LOAD and
PV_CP_CAT_TMP. This process adds certain defaults that were not in the Cohera catalog
tables to required fields in the PeopleSoft eProcurement Item tables.
Note. You need not access this page if you are using UNSPSC categories. UNSPSC
categories do not appear as options.
Type
Select the Cohera Catalog Schema as the catalog import
type.
Process by date/time?
Select to retrieve items that have changed since the last
process run.
Vendor Set ID
Enter the vendor setID that is used to build all PeopleSoft
eProcurement items.
Item Set ID
Enter the item setID that is used to build all PeopleSoft
eProcurement items.
Validating and Processing Imported Items
Access the Validate and Process Imported Items page.
Note. This page is accessible only if the Import Catalog process (PV_CP_IMPORT_RUN)
has successfully loaded the item data.
19-8
COHERA CATALOG MANAGEMENT INTEGRATION
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
CHAPTER 20
Appendix: PeopleSoft eProcurement
Reports
This appendix provides:
•
A summary table listing all PeopleSoft Inventory reports.
•
Detailed information for individual reports.
Note. For samples of these reports, see the Portable Document Format (PDF) files published
on CD-ROM with your documentation.
See Also
PeopleSoft PeopleTools PeopleBook: Data Management, “Configuration Management,”
Process Scheduler
PeopleSoft PeopleTools PeopleBook: Reporting, “Understanding PeopleSoft Reporting”
PeopleSoft eProcurement Reports: General Description
This table lists the PeopleSoft eProcurement reports, sorted alphanumerically by report ID.
The reports listed are Crystal reports. If you need more information about a report, refer to the
report details at the end of this appendix.
PeopleSoft eProcurement Reports
Report ID and
Report Name
Description
Navigation
Run Control Page
APY1090
Lists the match exceptions with
voucher data, purchase order
data, receiver data, and match
error information.
eProcurement,
Reports
RUN_APY1090
Matching
Exceptions
Report
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
Click the Match
Exceptions link to
access the Match
Exceptions page.
PEOPLESOFT
EPROCUREMENT
REPORTS
20-1
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Report ID and
Report Name
Description
Navigation
Run Control Page
APY3000
Lists vendors by status along
with their associated detail data
including address information
and payment options.
eProcurement,
Reports
RUN_APY3000
Lists your vendors by status
along with basic summary
information.
eProcurement,
Reports
Provides information about
selected requisitions and the
purchase orders that were
created from them.
eProcurement,
Reports
Provides purchase order details
such as late days and due date
sorted by buyer. You can use
this report to help determine
which purchase orders might
require expediting.
eProcurement,
Reports
Provides information about
selected purchase orders and the
requisitions that they were
created from.
eProcurement,
Reports
Provides purchase order
information sorted by purchase
order date.
eProcurement,
Reports
Vendor Detail
Listing Report
APY3001
Vendor Summary
Listing Report
POY1100
Requisition to PO
XREF Report
POY4005
Expediting Report
POY4100
PO to Requisition
XREF Report
POY4010
PO Listing Report
20-2
PEOPLESOFT
EPROCUREMENT
REPORTS
Click the Vendor
Detail Listing link
to access the
Parameters page.
RUN_APY3001
Click the Vendor
Summary Listing
link to access the
Parameters page.
RUN_POY1100
Click the
Requisition to PO
Xref link to access
the Requisition to
PO XREF page.
RUN_POY4005
Click the Expedite
Report link to
access the
Expediting Report
page.
RUN_POY4100
Click the PO to
Requisition Xref
link to access the
PO to Requisition
Xref page.
RUN_POY4010
Click the PO
Listing Report link
to access the PO
Listings page.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Report ID and
Report Name
Description
Navigation
Run Control Page
POY4020
Provides purchase order
information sorted by status.
eProcurement,
Reports
RUN_POY4020
PO Status
Listings
Click the PO Status
Listing to access
the PO Status
Listing page.
POY4030
PO Detail
Listings
POY4040
PO Schedule
Listings
POY5001
Receiver
Summary Report
POY5010
Receiver Shipto
Detail Report
POY5020
Receiver Account
Detail Report
PEOPLESOFT PROPRIETARY
AND
Provides detailed purchase
order information sorted by
purchase order date.
eProcurement,
Reports
Provides purchase order
schedule information such as
ship to and due date sorted by
purchase order date.
eProcurement,
Reports
Provides a summary listing of
receipts within a specified date
range.
eProcurement,
Reports
Provides a summary listing of
receipts shipments within a
specified date range.
eProcurement,
Reports
Provides a summary listing of
receipts with account
distribution.
eProcurement,
Reports
CONFIDENTIAL
RUN_POY4030
Click the PO
Details Listing to
access the PO
Details Listing
page.
RUN_POY4040
Click the PO
Schedules Listing
to access the PO
Schedules Listing
page.
RUN_POY5001
Click the Receipt
Summary link to
access the Receiver
Summary page.
RUN_POY5101
Click the Receipt
Shipto link to
access the Receiver
Shipto Detail page.
RUN_POY5020
Click the Receipt
Account Details
link to access the
Receiver Account
Detail page.
PEOPLESOFT
EPROCUREMENT
REPORTS
20-3
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Report ID and
Report Name
Description
Navigation
Run Control Page
POY5050
Provides the vendor's return
address, shipping method, and
line item return information.
eProcurement,
Reports
RUN_POY5050
Provides RTV details, sorted by
vendor and RTV ID, and lists
the buyer, line details, and the
distribution information
selected on the return.
eProcurement,
Reports
Provides information about the
accounting distribution for each
requisition. For each
requisition, the accounting
distribution lines are
summarized by GL (general
ledger) business unit, account,
and department. This report
also lists the requisition name,
requester, amount, and date.
eProcurement,
Reports
Provides information about the
accounting distribution for each
requisition down to the
distribution level. By
requisition distribution line,
each accounting distribution is
listed, including GL business
unit, account, department, and
amount.
eProcurement,
Reports
Provides information about the
items ordered on requisitions.
Sorted by business unit and
item catalog, this report lists the
items ordered and other
information, including quantity
ordered, average price,
currency, and number of
requisitions ordering this item.
eProcurement,
Reports
RTV Details
(return to vendor
details)
POY5060
RTV
Credits(return to
details credit)
PVY1000
Requisition
Costing Summary
PVY1100
Requisition Cost
Distribution
Detail
PVY2000
Catalog Item
Usage
20-4
PEOPLESOFT
EPROCUREMENT
REPORTS
Click the RTV
Details link to
access the RTV
Details page.
RUN_POY5060
Click the RTV
Credits link to
access the RTV
Credits page.
RUN_PVY1000
Click the
Requisition
Costing Summary
link to access the
Requisition
Costing Summary
page.
RUN_PVY1100
Click the
Requisition Cost
Distribution Details
link to access the
Requisition Cost
Distribution Details
page.
RUN_PVY2000
Click the Category
Item Usage link to
access the
Category Item
Usage page.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Report ID and
Report Name
Description
Navigation
Run Control Page
PVY4000
Provides information about the
items ordered for the purchase
orders within one business unit
and one item catalog. This
report lists the total quantity
ordered of each item and other
information, including item ID,
item description, item category
description, category code,
vendor ID, vendor name,
contract ID (if any), average
price, total amount, currency,
and percentage of total. This
report is sorted by catalog ID
and category code.
eProcurement,
Reports
RUN_PVY4000
PO Item Category
Usage
Click the PO Items
Category link to
access the PO
Items Category
page.
Common Elements Used in This Appendix
From Date and Through
Date
Enter the dates to provide the date range for the
requisitions that you want to include in the report. If you
leave these fields blank, all requisitions are included
regardless of their dates.
SetID
Enter the TableSet ID of the items that you want to
include on the report. A setID is required for this report.
PeopleSoft eProcurement Reports: A to Z
This section provides detailed information about individual reports, including important fields
and tables accessed. The reports are listed alphanumerically by report ID.
PVY2000 - Catalog Item Usage Report
Enter the name of the item catalog (PeopleSoft tree) that
you want to include in the report.
Tree Name
PVY 4000 - PO Item Category Usage Report
Catalog ID
Enter the name of the item catalog (PeopleSoft tree) that
you want to include on the report. A catalog ID is
required for this report.
Tree Node
Enter the name of the PeopleSoft tree node to limit this
report to items from this node.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT
EPROCUREMENT
REPORTS
20-5
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Enter a vendor ID if you want to limit this report to the
purchase orders generated for this vendor.
Vendor ID
20-6
PEOPLESOFT
EPROCUREMENT
REPORTS
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
Glossary
The terms in this glossary are used among multiple Financials and Supply Chain Management
applications.
Numbers
401(a)(17) Limits
The limitations on the earnings that may be included in the calculation of benefits under
qualified U.S. pension plans.
1st Year Amount
In PeopleSoft Workforce Analytics, 1st Year Amount is an employee-level compensation
amount, totaling the calculations for the first calendar year’s worth of accounting periods, in a
compensation scenario.
A
Abend
Abnormal End (to a process).
ABM (Activity-Based Management)
See PeopleSoft Activity-Based Management.
ABPS (Activity-Based Planning and Simulation)
See Activity-Based Planning and Simulation.
Absence
An absence occurs when an employee is not at work (absent) during a normally scheduled
work period. Absences may be scheduled or non-scheduled, compensated or uncompensated,
excused or unexcused. An absence may occur for a variety of reasons like illness, family
emergency, civic obligations (e.g. Military duty or jury duty), or vacation.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
1
GLOSSARY
Absence Entitlement
Element which defines the rules for granting paid time off for valid absences, such as sick
time, vacation, and maternity leave. An absence entitlement element defines the entitlement
amount, frequency, and entitlement period.
Absence Take
Element which defines the conditions that must be met before a payee is entitled to take paid
time off.
Accepted Exception
An exception that has been reviewed and validated (see Time Management).
Accommodations
Accommodations are efforts your organization is able to make for employees or applicants
with disabilities, such as purchasing special equipment or making structural changes to a work
environment.
Account Management
In PeopleSoft Demand Planning, a feature that enables you to divide a centrally held corporate
forecast into multiple subsections for easier maintenance and management. These subsections
are separate databases that can be distributed to account managers for use and updates, then
rejoined with the main database at a later date.
Account
A code for recording and summarizing financial transactions as expenditures, revenues, assets,
or liabilities balances. This is a delivered PeopleSoft ChartField, specific use of which is
typically defined by the organization during implementation of PeopleSoft General Ledger.
Account Type
A name for one of the different kinds of accounts used in a PeopleSoft General Ledger, such
as Asset, Liability, Equity, Revenue, and Expense.
Accounting Class
In PeopleSoft Enterprise Performance Management, an attribute that defines how the
particular resource would be treated for generally accepted accounting practices. Inventory
denotes whether a Resource will become part of a balance sheet account such as inventory or
fixed assets, while Non-inventory denotes that the Resource will be treated as an expense of
the period during which it occurs.
Accounting Date
The date that a transaction is recognized as opposed to the date the transaction actually
occurred—the Transaction Date (although the two dates can be the same). The accounting
date determines the period in the general ledger to which the transaction is to be posted. You
GLOSSARY
2
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
can only select an accounting date that falls within an open period in the ledger to which you
are posting. The accounting date for an item is normally the invoice date. In PeopleSoft Asset
Management, the difference between accounting date and transaction date determines whether
prior period depreciation must be calculated, and how much. Accounting Date must be later
than or equal to Transaction Date.
Accounting Entry
A set of related debits and credits. An Accounting Entry is made up of multiple Accounting
Lines. In most PeopleSoft applications, accounting entries are always balanced (debits =
credits). Accounting entries are created to record accruals, payments, payment cancellations,
manual closures, project activities in general ledger, and so forth (depending on the
application).
Accounting Entry Template
A user-defined table that controls the use of system-generated accounting lines in the posting
processes.
Accounting Split
Method indicating how expenses are allocated or divided among one or more sets of
accounting ChartFields.
Accredited Education
Education above the high school level completed in a U.S. college, university, or other
educational institution that has been credited by one of the accrediting agencies or associations
recognized by the Secretary, U.S. Department of Education.
Accrual
Any hours that employees accumulate for use at another time in the form of earned vacation
time or sick leave, for example.
Accrual Basis Accounting
Accounting that records the impact of a business event as it occurs, regardless of whether the
transaction affected cash.
Accrual Class Codes
Classes or categories of accruals.
Accrual Type
Defines an accrual such as annual leave or sick leave.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
3
GLOSSARY
Accumulate Demand
In PeopleSoft Demand Planning, a transfer process function that adds demand quantities for
an item to any quantities that already exist for the period.
Accumulator
Element which allows you to combine several elements. For example, an accumulator could
consist of all voluntary deductions, or all company deductions, enabling you to accumulate
amounts. It allows total flexibility for time periods and values accumulated. See also Time
Administration.
Accumulator [Global Payroll]
Element which provides a means for storing the cumulative values of defined items as they are
processed. As you make payments, take deductions, and perform calculations, you’ll use
accumulators to track accumulated amounts, or balances. You can accumulate a single value
over time or multiple values over time, as your requirements specify. For example, an
accumulator could consist of all voluntary deductions, or all company deductions, enabling
you to accumulate amounts. It allows total flexibility for time periods and values accumulated.
Action
In PeopleSoft Deduction Manangement, a task that you perform to obtain information required
to resolve a deduction.
Action and Conditions
A process that defines actions and conditions independently of one another and then combines
them to create a complete rule (see Rule Creation).
Action Code
In PeopleSoft Engineering, a user-defined code associated with an event/action triggered by
the implementation of an engineering change order (ECO). Actions could include analyzing
an item's existing quantity on hand, scrapping existing inventory, or modifying current
documentation.
In PeopleSoft Product Configurator, a 2-character code that identifies rule types. For
example, FP is the action code for the Finalize Price rule, and CN is the action code for the
Condition rule. The rules control the processing path for configured items.
Action List
An online list of customers who meet predefined credit management criteria. The list also
includes appropriate procedures for each action and contact information for the customer.
Action Owner
In PeopleSoft Deduction Management, the individual assigned a task to obtain information to
resolve a deduction.
GLOSSARY
4
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Action Reason
The reason an employee’s job or employment information is updated. The action reason is
entered in two parts: a personnel action, such as a promotion, termination, or change from one
paygroup to another—and a reason for that action. Action Reason is used by PeopleSoft
Human Resources, PeopleSoft Benefits Administration, PeopleSoft Stock Administration, and
the COBRA Administration feature of the Base Benefits business process.
Active Control
A target control requiring that the user validate the budget against the planning targets before
submitting it. If the budget totals are not within the tolerance levels, the system indicates that
the status is invalid and the user cannot submit their budget until the budget is modified and
the amount is within the tolerance range of the planning target.
Activity
In PeopleSoft Receivables and Deduction Management, an action taken on an item, such as
creating an item, unposting an item, or writing off an item.
In PeopleSoft Projects, the unit of work that provides a further breakdown of projects—
usually into specific tasks. Resources are assigned directly to activities within a project, not
directly to projects.
A self-contained task that is part of one or more business processes. Business process maps
display the activities that make up the process. An activity consists of steps representing the
pages the user needs to complete and events representing the workflow routings triggered by
the user's actions.
In PeopleSoft Enterprise Warehouse, the work of an organization and the aggregation of
actions used for Activity-Based Costing.
Activity Attributes
Activity Attributes provide pieces of activity information. For example: capacity and
performance, cost drivers, cycle time and performance measures.
Activity-Based Costing (ABC)
A methodology that measures the cost and performance of activities, resources and cost
objects, assigns resources to activities and activities to cost objects based on their use and
recognizes the causal relationships of cost drivers to activities.
Activity-Based Management (ABM)
See PeopleSoft Activity-Based Management (ABM).
Activity-Based Planning and Simulation (ABPS)
ABPS, a feature of PeopleSoft Activity-Based Management, calculates resource demands,
new rates, costs, and activity volumes based on demand forecasts. It converts the new
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
5
GLOSSARY
resource demands into new cost requirements at the General Ledger item level to feed as input
for budgeting.
Activity Driver
An Activity Driver indicates the amount of demand there is for a particular activity and it is
used to assign cost to cost objects. In some instances, an activity driver may represent the
yield of an activity.
Activity Fragmentation
The part of the Employee Profile feature that provides information about the number of
employees that is involved in completing a particular activity on a full or part-time basis.
Activity ID
A unique 15-character alphanumeric identifier given to each activity within a project. Activity
IDs need only be unique within a single project.
Activity List
In PeopleSoft Pension Administration, a checklist used to monitor pension-related activities.
Activity Type
A user-definable identifier for grouping activities.
Activity Type
Also known as Activity Code. A categorization of work effort. Typically work effort is
categorized as productive or non-productive; Repair, Maintenance, Enhancement, or
Improvement; or Development or Construction. Activity type is usually required to support
cost accounting or financial accounting (recording) functions. It may also be required to
support some organizational administration requirements such as organizational productivity
goals, or employee performance measurement. In some companies, activity type is inferred
from job function, work group affiliation, or organization.
Activity Use
An attribute used to describe the behavior of an Activity as defined within PeopleSoft
Enterprise Performance Management. A Primary Activity is an activity that is performed for
the purpose of directly generating revenue within the course of business. A Secondary
Activity is generally performed in direct support of a Primary Activity such as activities
related to human resources or MIS.
Actual Base Hours
This defines the number of hours that an employee is expected to work within a given period
under analysis within PeopleSoft Enterprise Performance Management. Hours worked in
excess of Actual Base Hours are generally considered overtime, while hours worked less than
Actual Base Hours would illustrate that the employee is working part-time.
GLOSSARY
6
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Actual Contribution Percentage (ACP)
The amount of an employee's after-tax or employer matching contributions made in a Section
401(m) plan on behalf of highly compensated plan participants, divided by the employee's
annual compensation, or an amount determined in the same manner with respect to non-highly
compensated employees. The Base Benefits business process is set up to perform ACP
nondiscrimination tests for Section 401(m) plans. See Nondiscrimination Tests and Highly
Compensated Employee.
Actual Date
Calendar date in which a punch occurred (see Time Reporting).
Actual Deferral Percentage (ADP)
The amount of salary reduction contributions made by an employee to a Section 401(k) plan
for a year, divided by the employee's total compensation for that year. The Base Benefits
business process is set up to perform ADP nondiscrimination tests for Section 401(k) plans.
See Nondiscrimination Tests and Highly Compensated Employee.
Actual Demand
In PeopleSoft Demand Planning, an Array of demand by historical period imported from an
external system. The demand figures are determined by imported values and typically include
shipments, orders booked, orders booked by requested ship date, or shipments.
Actual Rates
An Actual Rate is the rate that your business currently uses for its business practice.
Actuarial Assumptions
Any assumptions used to calculate an equivalent benefit for an optional form of payment or an
alternative retirement date.
Actuarial Valuation
A comparison of a pension plan's assets and liabilities.
Actuarial Valuation Extract
A PeopleSoft Pension Administration data extract containing data that a plan actuary needs in
order to determine the plan’s assets and liabilities.
Address Type
A high-level address classification that identifies addresses associated with a Material Issue.
Examples include Ship To Address, Bill To Address, and Ship Notification Address.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
7
GLOSSARY
Adjusted
In the Enterprise Planning and Simulation forecasting process, in addition to versions of the
statistical forecast, there is an adjusted version of the forecast. Managers create this version
by reviewing the forecasts and entering adjustments that cannot be inferred statistically. For
example, there may be a promotional campaign next quarter that is expected to boost volume
for certain products over several weeks.
Adjusted Demand
In PeopleSoft Demand Planning, an Array of demand after adjustments have been made to
the actual demand values. The adjusted figures may include both manual and systemgenerated changes, such as demand filtering and depromotion. The system uses adjusted
demand rather than actual demand in the Forecasting Reset process and in the recalculation of
model components during period-end processing.
Adjusted Forecast
In PeopleSoft Demand Planning, a Statistical Forecast that has been adjusted using
management overrides, proration, or summarization.
Adjustment
See Bill Adjustment or Inventory Adjustment.
Adjustment Voucher
A PeopleSoft Payables voucher that enables you to apply an adjustment to an existing voucher
or to relate one voucher to another.
Advice
The Form that employees who choose direct payroll deposit receive in lieu of a check.
Affiliate
A control person of a corporation. Generally, an officer, director, or major shareholder that has
the ability to influence the corporate management decisions.
After-tax Deductions
Deductions that reduce net pay. These deductions are subtracted from gross pay after taxes
have been taken out. Also called “post-tax” deductions.
Agency
Any Department or independent establishment of the Federal Government, including a
government-owned or -controlled corporation, that has the authority to hire employees in the
competitive, excepted, and senior executive services.
GLOSSARY
8
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Aggregated
In Enterprise Planning and Simulation, each period the statistical forecast is calculated
automatically by the system. A forecast for each individual product can be computed using
history for that product. Then these forecasts can be aggregated (that is, summarized) into
forecasts for the product family.
Aggregate Reporting
The ability to report time as a collection or mass. In Time and Labor aggregate time reporting
features include the ability to report time in a lump sum, as a pattern, in a range of dates, or for
an entire crew.
Aging Data
Updating data from separate sources, and separate dates, to a common date using an
annualized factor.
Aging ID
A code representing rules for aging open items.
Alias
Any of several PeopleSoft Pension Administration utilities that look up or calculate employee
information.
Allocated
In Enterprise Planning and Simulation, the computed forecast and the summarized forecast are
two different versions of the statistical forecast. In addition, the forecast at the product family
level can be allocated down to the individual products. Usually this allocation is done in
proportion to the calculated product forecasts at that level. This version of the (statistical)
forecast is called the allocated or prorated statistical forecast.
Allocated Inventory
The inventory assigned to a specific stock request.
Allocation Manager
Perform allocations using the Allocation Manager. Allocations enable you to distribute
revenue, expense, and statistical quantities across business units, departments, and so on. You
can allocate budget planning to detail levels so that you may perform detailed budgeting. The
type of allocation you select determines the output.
Allocation Manager Rules
In the PeopleSoft Enterprise Warehouse, Allocation Manager rules allow you to specify the
basis as well as the target tables for moving, aggregating, or multidimensionalizing your
output. Rules use Allocation Manager methods to enrich the PeopleSoft Enterprise Warehouse
data. See Allocation Manager Methods.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
9
GLOSSARY
Allocation Manager Methods
There are several methods: Arithmetic Operation, Prorata, and Spread Even. Each method
enables you to move and/or enrich output.
Allocations
A process of distributing budget amounts to and from other Budget Centers. Budget amounts
are allocated to cover, or offset, the costs in one Budget Center by charging them to another
Budget Center. An allocation is also the budget amount that is distributed to or from a Budget
Center. A budget amount that is charged to another Budget Center appears as a negative
amount. This same budget amount appears as a positive amount in the other Budget Center
receiving the allocation. PeopleSoft Budgeting-specific.
Allotment
This is a voluntary deduction from pay. Employees may elect up to two allotments from pay,
transmitted to a financial institution to the employee's checking or savings account.
ALM (Asset Liability Management)
See PeopleSoft Asset Liability Management.
Allowances
The amount owed to an employee in addition to base salary and which is not defined as part of
gross salary. For example, vacation can be considered an allowance. PeopleSoft Budgetingspecific.
Alternate Account
A feature in PeopleSoft General Ledger that enables you to create a statutroy chart of accounts
and enter statutory account transactions at the detail transaction level as required for recording
and reporting by some national governments.
Alternate BOM
Identifies the multiple ways in which an item can be produced. The primary production BOM
is designated as BOM code 1. By using BOM codes, you can associate up to 98 other
alternate BOMs with the item.
Alternate Routing
A routing, usually less preferred than the primary routing, but resulting in an identical item.
You can specify up to 98 alternate routings for production routing types by entering additional
Routing Codes (greater than 1) for the same routing type.
Alternative Minimum Tax (AMT)
AMT is calculated by adjusting the taxpayer's regular taxable income with a number of tax
preference items and adjustments. Tax preference items are positive items increasing
GLOSSARY
10
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Alternative Minimum Taxable Income (AMTI) and are excluded from regular taxable income.
Tax preference items include gain from the exercise of incentive stock options.
Amount Type
In PeopleSoft Workforce Analytics, the Amount Type specifies whether a benefits
compensation amount is a value or expense, to the employee or the employer.
Analysis Base
Defined static, historical data used both to seed and compare against proposed budgets.
Analysis Group
A grouping of analysis types. Analysis groups can be used for project analysis and grouping
or for mapping analysis types.
Analysis Template
A set of pre-defined reports that you can view and publish online. These templates access data
in the Enterprise Warehouse tables, and organize it by function, role and industry. The
templates allow you to pivot, sort, rank, drill and chart the data, for your analysis needs.
Analysis Type
A 3-character, user-definable identifier that enables you to label the different types of costs.
For example, you might want to track budgeted costs (BUD), committed costs (COM), and
actual costs (ACT).
Analytical Applications
See PeopleSoft Analytic Applications.
Analytic Forecasting
Analytic Forecasting is the part of the Planning and Simulation feature that creates forecasts
for your business requirements.
Annual Amount
In PeopleSoft Workforce Analytics, Annual Amount is an employee-level compensation
amount, totaling the calculations for a full fiscal year’s worth of accounting periods, in a
compensation scenario.
Annual Declaration Report
The French Annual Declaration report is a payroll report which checks establishment profiles
to see whether an establishment has to produce the report, and then calculates the amount of
all the social security contributions for this establishment.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
11
GLOSSARY
Annual Leave
Annual leave is absence from work with pay and must be approved by the employee's
supervisor in advance. This type of leave (Plan Type 51) is accrued based on years of service:
Full-time Permanent/Full-time Seasonal employees ...0-3 years - 4 hours per biweekly pay
period; 3-15 years - 6 hours per biweekly pay period (plus an additional 4 hours in the final
pay period of the leave year); and 15+ years - 8 hours per biweekly pay period. Part-time
Permanent/Part-time Seasonal employees...0-3 years - 1 hour for every 20 hours worked; 3-15
years - 1 hour for every 13 hours worked; 15+ years - 1 hour for every 10 hours worked.
Generally, there is a leave year ceiling of 240 hours on accrual; amounts accrued in excess of
the ceiling and not used prior to leave year-end are forfeited.
Annual Shareholders Meeting
A meeting of corporation’s directors, officers, and shareholders held for the purpose of
communicating the operating and financial results for the prior year, the prospects for the
future and major decisions of management.
Annual Workforce Survey by Nationality and Professional Category (EnquГЄte sur
l’activité et les conditions d’emploi de la main d’oeuvre)
In France, companies are required to submit the Annual Workforce Survey by Nationality and
Professional Category to the Ministry of Labor. This report provides an analysis of the
company’s foreign workforce, which includes any employee who does not have French
citizenship.
Annualized Tax Method
A payroll tax calculation method that divides the tax on an annualized amount by the number
of pay periods in the year to find withholding for a given pay period, based on the number of
withholding allowances. Annualized is the most common tax method.
Annuitant Amount
The gross monthly annuity a federally retired employee receives.
Annuitant CSA Number
A unique number assigned by OPM for a retired employee.
Annuitant Indicator
A code used to indicate the status of an annuitant appointed to a position in the Federal
civilian service. Text for the codes is as follows:
1. Reemployed annuitant - Civil Service/FERS
2. Retired military officer receiving pay
3. Retired military non-officer (enlisted) receiving pay
4. Retired military officer receiving pay and a reemployed annuitant - Civil Service
GLOSSARY
12
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
5. Retired military non-officer (enlisted) receiving pay and a reemployed annuitant - Civil
Service
6. Not applicable (none of the above)
Annuitant Indicator (cont)
A.
Reemployed Annuitant – FERS
B.
Former Annuitant - FERS
C.
Retired Officer/Reemployed Annuitant - FERS
D.
Retired Officer/Former Annuitant - FERS
E.
Retired Enlisted/Reemployed Annuitant - FERS
F.
Retired Enlisted/Former Annuitant - FERS
Annuity
A series of periodic payments made to an individual. Under a pension plan, these payments
are generally made monthly.
Anti-Dilutive
Typically, options or shares where the price is greater than the current fair market value of the
security.
APE (ActivitГ© Principale ExercГ©e) Codes
APE codes classify the type of industry or activity your French company is in, such as
software, banking or insurance. The APE codes are a normalized set of codes that are
required by law and are used in regulatory reporting.
API
An Application Programming Interface (API) is the technology that a software product
supplies so you can control it or communicate with it from another application. PeopleSoft
APIs enable the user to perform desired actions upon PeopleSoft data without having to know
the internal logic or rules of the program.
Applicant Hire Process
The procedure of hiring an applicant who has been tracked and administered in the
Recruitment pages. Once you assign an Employee ID, the system uses recruitment data to
populate the fields in the Personal Data pages.
Application agent
An application agent is an online agent that is loaded into memory with a PeopleSoft page. It
detects when a business rule has been triggered and determines the appropriate action.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
13
GLOSSARY
Application Designer
The integrated development environment used to develop PeopleSoft applications.
Application Engine
PeopleTools batch processes consisting of a set of defined SQL statements. Application
Engine processes is more efficient than COBOL or SQR, since they operate within the
database system, and don’t rely on external processing.
Application Journal Template
A set of rules and default values to control the creation of journals from accounting entries.
Application Processor
The Application Processor is the PeopleTools runtime engine that controls processing of the
application from the time the user requests a panel group from an application menu through
the time that the database is updated and processing of the panel group is complete.
Application Server
The application server is the centerpiece of PeopleSoft's three-tier architecture. It utilizes
Tuxedo, BEA Systems' transaction monitor, to manage client transactions and provide the
business rules and workflow capabilities of PeopleSoft's enterprise applications.
Application Server Domain
The collection of server processes and associated resource managers defined by a single
PSTUXCFG configuration file. Each application server domain is configured to connect to a
single database. Multiple application server domains can exist on the same server machine.
Appointing Authority
The basis that authorized the appointing officer to effect personnel actions on an employee.
Appointing Officer
Denotes if the employee has appointment authority based on laws and regulations.
Approve Time
The Time and Labor feature that approves all employee daily time before it can be sent to
payroll for processing. You can approve time by group or by individual employee. You can
also unapprove previously approved time.
Approving Official
Individual with the delegated authority responsible for signing the action(s) taken on an
employee.
GLOSSARY
14
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Array
An ordered grouping of data by period and year. PeopleSoft Demand Planning uses arrays in
forecasting demand.
Array
Element which enables you to extract information based on a column value. One way of
thinking of an array is that it is a SQL statement that retrieves data from an existing table.
Array Dimension
Determines which inventory-stocking possibilities are included in a Cube View. This
standard one-level dimension consists of the key fields that include, for example, order
quantity, safety stock, and turn rate.
Arrears Balance
An amount owed to either the employer or employee, usually the result of a deduction not
fully taken.
Ask Price
The price at which someone who owns a security offers to sell it; also known as the asked
price.
As-of-Dated
Refers to a snapshot of the data at a given point in time.
Asset Assignment
A streamlined means of associating project costs to assets or asset profiles within PeopleSoft
Projects.
Asset Budgeting
Budget for planned asset acquisitions and the associated depreciation expense that can be
associated with a Capital Acquisition Plan (CAP).
Asset Catalog
A list of asset profiles which includes information about that asset type, including Cost, Life,
Salvage Value, Depreciation Method, Currency Code, and Asset and Depreciation Account.
Asset Category
A standard group of assets. Typical asset categories include Furniture and Fixtures,
Machinery and Equipment, Land, Buildings, Leasehold Improvements, and the like. These
generally correspond to General Ledger asset accounts. Assets in one category usually share
some depreciation characteristics, such as estimated service life and depreciation limits.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
15
GLOSSARY
Asset Class
An asset group used for reporting purposes. It can be used in conjunction with Category to
refine asset classification.
Asset Liability Management
See PeopleSoft Asset Liability Management.
Asset Life
The number of years an asset will depreciate, after which time it might be kept or sold for its
Salvage Value. Also see Useful Life.
Asset Profile
A template that contains standard depreciation criteria for an asset type and its corresponding
asset books. You can use the information in asset profiles as default values when adding
assets.
Assignment of Life Insurance
Effective 10/3/94, Federal employees can assign their Basic, Option A and Option B insurance
to another person(s), firm(s), or trust(s); Option C is excluded. The assignment of benefits
transfers ownership of the FEGLI coverage to the assignee(s). The insured no longer has
control over his/her insurance coverage and can no longer designate beneficiaries.
Assignment is irrevocable. Either all or none of the insurance can be assigned. Assignment
does not have to be to the same person or firm. Assignments must be made in percentages of
total insurance versus an assignment of Basic Insurance to one person and Option A to
another. Additionally, terminally ill employees can assign their insurance to a Viatical
Settlement Firm in exchange for cash (approx. 60% - 85% of the face value of the coverage).
Life Expectancy is usually 24 months or less for a Viatical Settlement Agreement.
Assignment Type
This defines the behavior of the object, (resource, activity, or cost object) within PeopleSoft
Activity-Based Management. If the object is identified as a source then costs may be
allocated from that object to another object, which must be identified as a target. If an object
ID is identified as a target it may be allocated costs from another object ID but may not
allocate costs. An object ID can be both a source and a target, thereby having the functionality
of each.
Associated Primary BOM
With multiple outputs, it’s possible that a given co-product can be created in more than one
way – in other words, an item is a co-product on more than one items’ primary BOM. By
assigning an associated primary BOM to a co-product, you are telling the system which BOM
to use in exploding the co-product to the next level.
GLOSSARY
16
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
AT Section
In France, this stands for Section Accident du Travail, or Work Accident Section. It is
information needed to identify the establishment risk code for insurance purposes.
ATP Reserved Order
An order that has been promised against future supply. The user has an obligation to the
customer to fulfill the order quantity by a certain date. ATP-reserved orders are also referred
to as promised orders.
Attendance
A component of time reporting application whose purpose is to apply business rules related to
Benefit Entitlement and Administration and Organizational Administration to time reported as
worked or not worked, and to satisfy a variety of reporting needs.
Attendance Reporting
A Time and Labor report that indicates an employee’s attendance record. It includes sick
leave, vacation time, and other leaves taken.
Attribute
An attribute is an element within a dimension. For example, the element “Store” is an
attribute of the dimension “Geography” for the retail industry. An attribute is also a column
heading on an analysis and reporting template.
Audit Trail
See Drill-Back Calculation.
Auditor
Person designated to review expense sheets and cash advances before payment.
Automatic Revision Incrementing (Auto Rev)
The ability to automatically set up revision control and generate revisions for revisioncontrolled items at the business unit level. This includes setting up a revision scheme or a
predetermined, ordered list of revision names.
Automatic Spouse Benefit
A joint and survivor pension benefit provided without any actuarial reduction to a pension
benefit. The automatic benefit is a n% joint and survivor; the employee is still entitled to
choose any optional form of payment and any beneficiary for the remainder of the benefit.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
17
GLOSSARY
Availability Date
The date a lot becomes acceptable for fulfillment in PeopleSoft Inventory or for consumption
in PeopleSoft Production Management. (Availability Date = Creation Date + Availability
Lead Time)
Available to Promise (ATP)
The projected supply of a product less the actual demand, which informs the sales and
marketing department of the products that can still be sold without modifying the master
schedule. ATP isn’t cumulative – it’s calculated for each period.
Average Daily Balancing
A feature in PeopleSoft General Ledger that enables you to target the ChartFields on which
you base average balance calculations, summarize amounts for selected ChartField values
according to your reporting requirements, and define the periods for these calculations.
Used by the financial analytic applications in Enterprise Performance Management. For a
reporting period (usually monthly) this refers to the average daily balance of an account as
opposed to the month-end-balance, which is the balance as of the last day of the month.
Average Daily Balance Ledger (ADB_Ledger)
In the PeopleSoft Enterprise Warehouse, the Average Daily Balance Ledger table
(PF_ADB_LEDGER_F00) is similar to the functionality of the PF Ledger table
(PF_LEDGER_F00), in that it too supports reporting. However, the Average Daily Balance
Ledger is used for average daily balances. It is a table that is used mostly for processes
associated with the financial services industry.
Average Inventory
In PeopleSoft Inventory Planning, one half of the average lot size plus the safety stock when
demand and lot sizes are expected to be relatively uniform over time. When demand and lot
sizes are not uniform, the stock level versus time can be charted to determine the average.
Average Price
The average price derived from either the bid and ask prices (for bid/ask/average) or from the
high and low prices (for high/low/average).
Average Static Calc Flag
In PeopleSoft Inventory Planning, a method used with static policies. The average method
sets the static policy equal to the weighted-average, time-phased policy over the next
argument periods.
Award
A special payment to an employee for certain prescribed kinds of activities or
accomplishments.
GLOSSARY
18
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
B
Back Pay Interest
Under certain circumstances, an employee can be eligible to receive additional pay relative to
a delayed receipt in salary caused by administrative error in processing a personnel action.
The U.S. Office of Personnel Management has established guidelines for Federal agencies on
when and how to make these calculations.
Background Process
Any task or process that is grouped with another and runs in the background. Background
processes are usually scheduled to run on a regular basis. All background processes are
executed through process-specific COBOL programs run outside the Windows environment.
Backlog Reason Code
An identifier indicating the reason an item could not be shipped. Example codes might
include out of stock, discontinued, or seasonal.
BAD Forecast Ratio
In PeopleSoft Demand Planning,the maximum acceptable value of the ratio of the and the base
component (Standard Deviation/Base Component). When this value is exceeded, the system
automatically resets forecast model parameters. The higher the value, the less likely it is that
the system will reset the parameters. In most organizations, a BAD ratio of 1.00 or lower is
appropriate for most items.
Balance Segmentation
Balance Segmentation is used in Funds Transfer Pricing to divide balances in deposit accounts
between core (stable) and non-core (volatile) segments. Core funds represent the minimum
balances that are retained on a long-term basis, building a relatively reliable source of funding
to the bank. Non-core funds are temporary in nature due to their volatility caused by customer
preferences for liquidity, and cannot be utilized on a long-term basis.
Balance Type
Balance Type is a lookup code used to define the type of instrument balances that will be
stored in the PeopleSoft Enterprise Warehouse and processed by the analytic applications.
Examples of different Balance are Current Balance, Average Daily Balance, Period Ending
Balance, or Commitment Balance.
Balanced Scorecard
See PeopleSoft Balanced Scorecard.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
19
GLOSSARY
BAM
Business Analysis Model. XXX I think this term is incorrect because we use BAM to refer to
the application. If we were referring to the business analysis model, we would say BAM
model (that is, Business Analysis Modeler model.)
BAM Model
The BAM database published from the template. The model contains both the data and
analytic structure used in the application. The BAM database is physically separate from the
Enterprise Warehouse database. Data is sent to the model through migration processes.
BAM Template
A file created using BAM design tools, representing the model prior to its creation as a
database. This file has an extension of .MDL. This file is published to a BAM database once
the model design process is complete. Each application using BAM will deliver templates
which the customer will review and publish to a database in their environment.
Bank Identification Number (BIN)
In PeopleSoft Payables, a part of the bank information that identifies business unit banks.
Base Budget
The initial budget defined by the Budget Coordinator. The base budget is distributed as a
starting point for Budget to review and edit. The base budget can be zero-based or
incremental.
Base Compensation
In PeopleSoft Workforce Analytics, Cash Compensation that is typically categorized as fixed.
It includes base pay and shift differentials as well as associated merit, equity, and step
increases.
Base Currency
Base Currency is used to consolidate and report financial results of a multinational company.
When a company transacts its business operations in different transaction currencies, those
currencies are translated to the base currency for reporting purposes.
Base Currency Equivalent (BCE) Amount
If the monetary amount is in a currency other than the base currency, either the ExtractTransform-Load (ETL) process or the Multi Currency Engine can be used to convert the
monetary amount to the Base Currency Equivalent (BCE) Amount.
Base Factor
In PeopleSoft Demand Planning, an element of a smoothing constant simulation set that
controls base component smoothing in the Model Reset Simulation process.
GLOSSARY
20
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Base Metric
Metric found on a fact table. A base metric usually contains an aggregate operator, for
example “sum” or “count”.
Base Pay
A pay component included in the job comp (job compensation rate) calculation. It is pay for a
regularly assigned workweek. For example, you can set up a regular hourly rate plus a shift
rate, a union-negotiated rate for hazardous work, and so on.
Base Pay Structure
A PeopleSoft Workforce Rewards module you use to create or revise pay structures, and to
assess the cost and impact of implementing new structures.
Base Time Zone
Customer defined time zone used for converting reported time to a common time zone for ease
of applying rules (see Time Administration).
Batch
Batch systems are used when realtime updates are not needed. Batch-oriented data collection
applications, developed in-house or by a third-party vendor, produce transactions that are
collected in an ASCII text file. The text file is fed to a PeopleSoft SQR program that loads the
transactions into the database.
Batch Processes
Any of the background programs in the client/server environment of PeopleSoft applications.
Batch processes perform operations—such as pay confirmation, deduction calculation, and so
forth—on groups of records, and are usually scheduled to run on a regular basis. You run
these processes from the Process Scheduler, and they are executed through process-specific
COBOL programs.
Before-Tax Deduction
Deduction that reduces net pay and FWT taxable gross, applied prior to the calculation of
federal and state/provincial withholding taxes. Also called “pre-tax” deductions.
Begin Calc Date
The date on which PeopleSoft Asset Management begins to deduct from an asset's life.
Begin Depr Date
The date on which PeopleSoft Asset Management begins to calculate depreciation for an asset.
Begin Depr Date is calculated using In-Service Date and Prorate convention.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
21
GLOSSARY
Benchmark Job
In PeopleSoft Workforce Analytics, this refers to a Job Code for which there is corresponding
salary survey data from published, third party sources. Jobs for which there is no
corresponding salary survey data are referred to as non-benchmark jobs.
Benefit Commencement Date (BCD)
The date on which a pension payee elects to begin receiving payments.
Benefit Deduction
Any amount taken from an employee’s pay check to offset all or part of the cost of the
employee's benefits.
Benefit Eligibility
The PeopleSoft Pension Administration function that determines if an employee is eligible for
retirement or ancillary benefits. A plan may have several retirement types—normal, early,
late, death, and disability—each with its own eligibility criteria.
Benefit Entitlement
Any rules governing the circumstances under which employees are entitled to receive certain
benefits. Typically, entitlement to benefits is based on type of employee (for example, full
time, part time, occasional), length of employment, and specific rules which apply thereto, i.
e., work group affiliation, and compensation base. Other criteria may also apply, such as
reasons-for-claiming or job performance.
Benefit Formula
The formula that determines a participant’s pension benefit in a defined benefit plan, as well
as the PeopleSoft Pension Administration function that calculates the benefit.
Benefit Group
Part of a group of defaults assigned to job codes. Benefit group may include medical, dental,
and health benefits dependent on individual company parameters.
Benefit Plan
A specific benefit within a plan type. For example, your company’s life plan type might
include benefit plans of one times salary, two times salary, and three times salary.
Benefit Plan Type
Any category of benefit, such as health, life, or savings.
Benefit Program
A set of benefits and deductions valid for an employee or group of employees. A single
company may have any number of programs. An individual employee may belong to only
GLOSSARY
22
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
one program; the deductions and benefits contained in that program are the only valid
deductions and benefits for that employee.
Benefit Tables
Any of the tables that contain employee benefits information. These are often relevant to
payroll processing.
Benefits Base
The salary used for benefit calculations. The benefits base will be either the employee Annual
Rate or Annual Benefits Base Rate.
Benefits Compensation
In PeopleSoft Workforce Analytics, Benefits Compensation is value associated with
employment benefits. It can include benefits types for Health and Welfare (Medical, Life
Insurance), Retirement (annuities, savings plans, pensions), and Paid Time Off (Vacation
Leave, Sick Leave). Benefits compensation is sometimes fixed, and sometimes variable,
depending upon the benefit type.
Betriebszählung (Company Statistics Report)
Also called the OFIAMT report. This report provides statistics required by the Swiss Federal
Department of Statistics (BFS).
Bias Signal Limit
In PeopleSoft Demand Planning, a number between one and six that indicates how many
Forecast Period to test for bias. If the bias test is violated, the system records a Tracking
Signals error in the period up to the number of periods determined by the bias signal limit.
Bias Test
In PeopleSoft Demand Planning, a forecasting test that sets the limit for tripping a Tracking
Signals. The lower the value, the more likely it is that a tracking signal is set.
Bid Price
The price a prospective buyer is prepared to pay at a particular time for trading a unit of a
given security.
BIF file
This is the bulk insert file (input.bif) used with the Verity search engine to specify the
documents to be submitted to a collection (search index). It contains a unique key, document
size (in bytes), field names and values, and document location in the file system.
Bilan Social Report
See Employee Survey Report.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
23
GLOSSARY
Bill
In PeopleSoft Billing, any group of bill lines.
Bill Adjustment
The process of making credit or credit and rebill adjustments to an invoiced billing activity.
Bill By Identifier
The Bill By Identifier is used to define how billing activity is grouped when added to a bill
through the billing interface or the Populate Billing process.
Bill Header
The record containing information that pertains to the bill as a whole. Each bill has a unique
bill header that identifies it within the system.
Bill Inquiry Phone
Bill Inquiry Phone is the number printed on your invoices for your customers to call if they
have any questions about their bill.
Bill Line
The basic unit of billing activity representing a billable charge, including the charge identifier,
quantity, price, and any other information regarding an individual transaction. Every bill line
is related to a bill header that may have one or more bill lines related to it.
Bill Search
A method of finding a bill or bill line when you don't have enough information to call up the
bill directly. Customer Bill Search enables you to locate a bill by Customer Name. You can
also choose other parameters to limit your search. With Bill Line Search you first search for a
particular bill and then a line on that bill. Parameters for bill line search include Reference,
Date, and Amount.
Bill Source
The point where billing activity originates. Bill sources may be external to the system
(imported through the billing interface) or entered directly online. Examples of bill sources
include order management, project costing, and contract administration.
Bill To Customer
A customer who receives an invoice.
Bill Type
A category of billing activity variety. Examples of Bill Types include standard and custom
order activities.
GLOSSARY
24
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Bill Update
The process that adjusts bills that have either been entered manually or generated within the
system.
Billable Indicator
A status flag that identifies an item as eligible for billing to a customer.
Billback Discount (BB)
A per unit discount which typically requires a customer to perform one or more merchandising
activities to receive the discount. A BB discount is not deducted from the customer invoice,
but once the customer performs the merchandising activity, a sales representative or broker
can approve payment for the discount amount. Billback discounts can originate from a
National Allowance or Customer Promotion, and are passed to PeopleSoft Order Management
for informational purposes only. Billback discounts are recognized as a liability when the
product is shipped.
Billing Location
A number identifying a customer address. Each customer may have multiple locations, but
must have one Primary Location at which you contact them.
Blackout Period
The period of time, determined by the company, which prohibits certain activity in the
company stock. Blackout Periods can affect the trading of some key individuals or can be
placed on the entire company.
Bonus Tax Method
Annualizes your year-to-date earnings by multiplying them by the number of pay periods in
the year. This method is used for Canadian tax processing.
Book
In PeopleSoft Asset Management, a data location storing financial information—like cost,
depreciation attributes, and retirement information—on assets.
Borrow/Loan
The temporary reassignment of an employee to other task reporting or compensation
requirements to allow the business to meet unexpected, short-term, fluctuations in staffing or
work load. Typically, this kind of reassignment is done informally at a local level, where HR
isn’t involved and a new job record isn’t created. Companies may have specific rules about
how long an employee may be borrowed/loaned, how and where productive, non-productive,
and compensated absence time will be charged, and what business rules to apply to the
borrowed employee’s time for the purpose of compensation and benefit entitlement and
administration. See also Casual work Assignment.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
25
GLOSSARY
Bracket
Brackets are a way to look up and retrieve database table values. After you've defined a table,
the system finds a corresponding row on that table and returns the value of the bracket. The
result is then available for use in other items such as formulas.
Branch
A tree node that rolls up to nodes above it in the hierarchy, as defined in the Tree Manager.
Branch Of Military Service
Identifies, if any, military service in which the employee served.
Breadcrumbs
Breadcrumbs show the navigation path to the current web page location. As you drill down
through the different levels of the registry, a “breadcumb trail” appears that shows the path
you’ve selected. Each registry level is separated by an angled brace (>), and you can select
any level to navigate directly back to that level.
A typical Breadcrumb would look like this:
Home > HR > Administer Workforce > Benefits
Break Funding
Charges assessed for mortgages that are paid off before maturity. In the Funds Transfer
Pricing (FTP) application, Break Funding charges are factored into the transfer price for a loan
that may be prepaid.
Break in Service
A period of time for which an employee does not meet stated service requirements.
Break Price
The price used to determine which options are eligible for repricing. For example, if the break
price is $36, then all outstanding option with a grant price of $36 and greater are eligible for
repricing.
Break Punch
An in/out punch of when a time reporter takes a break.
Brokers
Individuals or organizations who buy and sell securities. Often they are account executives
who work for firms registered with the Stock Exchanges and the SEC. Unlike Transfer
Agents, (who are not responsible for sales) Brokers do not maintain records on all your
company’s certificates. They maintain only sales records and stocks for their clients.
GLOSSARY
26
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
BSC (Balanced Scorecard)
See PeopleSoft Balanced Scorecard.
Budget Activity
A type of activity peformed using PeopleSoft Budget Planning. Budget activities include Line
Item Budgeting, Line Item Mass Adjustments, Budget Allocations, and Position Budgeting.
PeopleSoft Budget Planing-specific.
Budget Amount Ledger
Stores budget amounts and is updated by posting budget entries, transfers, and adjustments.
Budget Analyst
A role within PeopleSoft Budgeting. Budget Analysts are typically people within an
organization responsible for reviewing and analyzing a prepared budget before submitting it to
the Budget Coordinator. PeopleSoft Budgeting-specific.
Budgetary Account Only
An account used by the system only and not by users; this type of account will not accept
transactions. You can only budget with this account. Formerly called “system-maintained
account.”
Budget Category
A set of related expenses that are accumulated for proposal budgets and reporting to a sponsor.
The estimated cost for a set or class of accounts.
Budget Category
Numeric/alpha identification given to each category of positions.
Budget Center
In PeopleSoft Budgets, any entity responsible for producing or reviewing budget data. For
example, a Budget Center might be the individual departments responsible for producing
budgets.
Budget Center Dimension
In PeopleSoft Budgets, the dimension by which you distribute budget data. If you budget by
department, your department dimension will be your Budget Center Dimension. You’ll assign
Budgets Users to the nodes and detail values on the tree you use to build your Budgets Center
Dimension.
Budget Check
In commitment control, the processing of source transactions against control budget ledgers,
to see if they pass, fail, or pass with a warning.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
27
GLOSSARY
Budget Check Override
Selective suspension of Budget Processing. With this feature you can override the controlled
budget for a transaction that failed budget checking due to insufficient funds; or override the
tolerance limits for a transaction rejected due to exceeded tolerance limits. When you push
the Override button, the system flags the transaction to allow the Budget Processor to process
successfully regardless of available funding. You can cancel the override any time before the
Budget Processor is run by clicking the Cancel Override button.
Budget Control
In commitment control, it ensures that commitments and expenditures don’t exceed budgets.
It enables you to track transactions against corresponding budgets and abort a document’s
cycle if the defined budget conditions are not met. For example, you can prevent a purchase
order from being dispatched to a vendor if there are insufficient funds in the related budget to
support it.
Budget Coordinator
A role within PeopleSoft Budgeting. Budget coordinators are responsible for monitoring the
budget process. The Budget Coordinator is typically located within an organization’s central
budget office and builds the budgeting model. PeopleSoft Budgeting-specific.
Budget Detail
A level of itemization that when combined makes up a major budget category.
Budgeted Rates
In PeopleSoft Activity-Based Management, the rate your organization uses based on the
budget.
Budget Error Exception
A transaction that fails budget checking, causing an Error or Warning to be issued. See Error
Exception and Warning Exception.
Budgeting Functions
PeopleSoft Budgeting’s six main action categories, including: system administration,
budgeting setup, budgeting preparation, budgeting analysis, data integration and my profile.
Your user role determines how many of these functions display and are available.
Budgeting Model
The framework for an organization’s budget development process. Business unit defines a
Budgeting Model. The Budget Coordinator typically defines the model and includes the time
period of a budget cycle, time period for phases within a budget cycle, the sources of data that
will be available to budget users, the methods that will apply to line-item budgets, and other
budget options and control parameters. PeopleSoft Budgeting-specific.
GLOSSARY
28
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Budgeting Type
Associated with the budget ledger type set definition, a budget type is an indication of whether
the organization uses a standard budget ledger, project budget ledger, or controlled budget
ledger for budgeting.
Budget Justification
Written explanation further defining the what and why of a budget category.
Budget Period
The period in which you define plans to meet your organizations training requirements.
The interval of time (such as 12 months or 4 quarters) into which a period is divided for
budgetary, and reporting purposes. The ChartField allows maximum flexibility to define
operational accounting time periods without restriction to only one calendar.
Budget Phase
In PeopleSoft Budgets, a span of time during which a budget or portion of a budget is to be
completed. You’ll filter dimensions, assign alternate Budgets Users, enable Position and
Asset budgeting, and specify Budgets User notification options at the Phase level.
Budget Plan
In PeopleSoft Workforce Rewards, when working with a Compensation Planning BAM
model. A budget plan is a rollup of like compensation rules. For example, for base pay rules
budget plans are a rollup of values for like Action Reasons. For variable pay rules budget
plans are a rollup of the values for like Variable Compensation Plan IDs.
Budget Preparer
A role within PeopleSoft Budgeting. Budget preparers are typically people within an
organization responsible for developing the detailed budget for a Budget Center and
submitting it to a Budget Reviewer or Analyst for review and approval. PeopleSoft
Budgeting-specific.
Budget Reviewer
A role within PeopleSoft Budgeting. Budget reviewers are typically people within an
organization responsible for reviewing and approving a prepared budget submitted by a
Budget Preparer. PeopleSoft Budgeting-specific.
Budget Seeding
Represents a new budget or forecast, such as historical data that is manipulated to develop a
more current representation for a proposed budget. Uses detail data as the budget seed or
basis to create the base budget that represent the level of detail in which budget numbers are
prepared.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
29
GLOSSARY
Budget Translation Trees
Trees translate (summarize) source transactions into the appropriate levels for processing
against control budgets. This is because you usually budget above the level of your source
transaction ChartFields on a tree.
Budget Type
Indicates whether a budget is for expenditures or revenues.
Budget Warning
See Warning Exception.
Budgets User
In PeopleSoft Budgets, any user who needs to gain access to the Budgets. You’ll designate
Budgets Users on the Budgets Users page through the Coordinate Budgets window. You’ll
also assign these users to the tree representing your Budget Center Dimension.
Budget View
A user-defined view where selected dimensions, columns and rows of data determine the
layout of line-item budgets affecting the view or entry of data.
Budget Year
The institutionally defined, consecutive, 12-month period to which a financial transaction or
summary applies.
Build Option
A detailed PeopleSoft Planning model that specifies a method of building an assembly item.
This model specifies the routing, resources, and materials that are necessary to produce the
item.
Built-in function
Prior to PeopleTools 8.0, there were only built-in functions, like FetchValue, ScrollSelect, etc.
A built-in function, in your code, is on a line by itself, and doesn't (generally) have any
dependencies. You don't have to instantiate anything before you can use a built-in.
Business Interlink Definition
A definition encapsulating an external Transaction or Query and providing a set of generically
typed input/outputs that can be assigned to PeopleCode variable or Record Fields at runtime.
A Business Interlink Definition is added to the Application Designer’s objects at the same
level as Fields, Records, Panels, etc.
GLOSSARY
30
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Business Interlink Design-Time Plug-in
An XML file that, when coded for an external system, encapsulate that external system and
provide a catalog of Transactions, Classes and Criteria specific and meaningful to that external
system.
Business Interlink Framework
The framework for integrating any external system with PeopleTools application objects. It is
composed of the following components:
1) An External System, 2) Generic definitions for a Transaction/Query command interfaces, 4)
Business Interlink Definitions, 4) Business Interlink Plug-in.
Business Interlink Object
An instantiation based on a Business Interlink Definition. Actual data can be added to the
inputs of the Business Interlink Objects once the appropriate bindings are provided. The
Business Interlink Object can be executed to perform the external service. Once a Business
Interlink Object is executed, the user of that object can retrieve the outputs of the external
service. The Business Interlink Objects use buffers to receive input and send output. When a
Business Interlink Object is executed, the transaction/query/class associated to the Business
Interlink Object will be executed once per each row of the input buffers corresponding to the
input Records. If there is only one row, after appropriate substitution by the driver, it is
executed only once.
Business Interlink Runtime Plug-in
A set of C++, Visual Basic, or other high-level language methods that, when coded for an
external system, encapsulate that external system and provide the execution methods to match
the Business Interlink Design-Time Plug-in. (The catalog of Transactions, Classes and Criteria
provided by the Design-Time Plug-in can also be provided by the Runtime Plug-in.)
Business Objects
A way of identifying those mass changes that have been designed to be referenced by a
flexible formula and provide them with a shorter name to simplify the creation of flexible
formulas.
Business Planning
The type of planning that focuses on elimination activities that are not needed by changing the
drivers.
Business Rules
Rules that can process information differently depending on the values of data in the
PeopleSoft Enterprise Warehouse.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
31
GLOSSARY
Business Unit
A corporation or a subset of a corporation that is independent with regard to one or more
operational or accounting functions. PeopleSoft General Ledger business units typically
comprise individual entities for accounting purposes.
Business units in PeopleSoft Projects represent operational structures but not necessarily
independent financial units.
PeopleSoft Payables business units are either Vouching (have payables accrued to them) or
Charge to (have voucher expense distributions charged to them), and pass journals to general
ledger units.
PeopleSoft Purchasing business units share vendor, purchase order, and receiving information
with PeopleSoft Payables units in the same SetID.
A PeopleSoft Inventory business unit is a storage facility that maintains its own replenishment
and costing methods, as well as its own definitions and guidelines.
The Manufacturing business unit must be identical to the Inventory business unit in order to
link the manufacturing and inventory processes.
The Order Management business unit controls certain order processing parameters (tax and
freight calculation methods, base currency, credit card hold options, and so on) for its
associated PeopleSoft eStore and Mobile Order Management merchant variants.
Business Unit Audit List
One or more business units specifically targeted for expense report and cash advance audits.
Buying Agreement
You can structure flexible and easy-to-use buying agreements for customers or groups of
customers. You can set up maximum amounts and specify the minimum dollar value per
order placed against it. You can automatically generate sales orders or create sales orders
online from buying agreements. Rebate and penalty calculations can be implemented for
buying agreements.
C
Cafeteria-Style Benefits
Any programs offering several benefit plans from which participants make elections.
Cafeteria-style benefits may or may not include flexible credits.
Calculation
In PeopleSoft Pension Administration, the determination of a participant’s pension benefit.
GLOSSARY
32
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Calculation Rule
Criteria for calculating benefits, including as-of dates for age, service, premium, and coverage
calculations; rounding rules; and minimum and maximum coverage amounts. Any number of
program and plan combinations can use a single set of calculation rules.
Calculation Rule [Global Payroll]
Any rule you develop using combinations of elements to command the system to perform a
type of calculation.
Calendar
In PeopleSoft Manufacturing, a list defining the days your enterprise is available and the hours
of operation for each day. The system first looks to see whether you are using a work center
specific calendar. If none is defined, it looks at the production calendar. If no production
calendar is defined, planning and scheduling functions base start and due dates on a five-day
workweek.
In PeopleSoft Demand Planning and Inventory Planning, a list defining the start and end dates
for each time-phased period. It also contains daily weights for distributing raw data into
different period buckets.
In PeopleSoft General Ledger, your accounting calendar defines the time periods to which you
post transactions for different ledger group and business unit combinations. You can have
multiple calendars, so you can keep a calendar for actuals, another for budget and forecast
activity, and still others for special reporting or transitional needs.
Calendar Group ID
Allows you to group together multiple Calendars that you want to run together at the same
time. It also controls the order in which the Calendars are processed. You can only group
calendars together that are for the same country (based on pay entity country).
Calendar Scope
A time period type (Day-Factored, Month-Factored, or Week-Factored) for use in building
your time period calendar.
Canada Academic Teaching Surveys
Statistics Canada requires that all Canadian universities (all degree granting institutions)
produce full-time and part-time Canada Academic Teaching Surveys. These reports are a
legislative requirement. PeopleSoft HRMS 8 provides you with the functionality to code
HRMS information using Statistics Canada codes and create both the full-time and part-time
Academic Teaching Surveys.
Canadian Industrial Sector
The Canadian industrial classification code with which employees are associated for Canadian
employment equity reporting purposes.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
33
GLOSSARY
Canadian National Occupational Classification (NOC) Codes
NOC codes are occupational classification codes for Canadian companies provided by the
government.
Canadian Standard Occupational Classification (SOC) Codes
SOC codes are occupational classification codes for Canadian companies provided by the
government.
Cancellation
A process that terminates stock fulfillment requests, allowing reserved and allocated items to
be returned to inventory.
Cancellation
In the context of an employee stock plan, a transaction (usually triggered by a specific event,
such as a termination of employment) in which outstanding securities are declared void and
inactive and returned to the pool of securities reserved for issuance under the plan or retired.
Candidate Keys
In PeopleSoft Demand Planning, elements of data that can be used to construct the Forecast
Item key field at different levels of the forecast.
Capacity Rate
A rate you assign to a capacity cost object. This enables you to track and report on excess
capacity.
Capacity Fence
A time fence that indicates that date and time after which PeopleSoft Enterprise Planning or
Production Planning solvers ignore capacity violations. The solvers do not use this date in
processing capacity violations.
Capacity Multipliers
A multiple used in PeopleSoft Enterprise Planning and Production Planning to determine the
available capacity on a resource. Since a capacity multiplier is effective-dated, you can use it
to vary the resource’s available capacity over time.
Capital Acquisition Plan (CAP)
A method of projecting and tracking capital expenditures for a project. Budgeted assets and
actual expenditures can be associated with a CAP Plan so the owner can track planned against
actual costs.
GLOSSARY
34
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Capital Gain
The difference between an asset’s purchase price and selling price, when the difference is
positive. Capital gains can be either short-term (where the capital asset was held for 12 months
or less) or long-term (where the capital asset was held for 12 months or more).
Capital Gains Tax
A tax on profits from appreciation in owned real property, recognized at the time the property
is sold; real property includes owned company shares.
Capitalization
The total types and amount of the outstanding securities that have been issued by a
corporation. Generally includes both equity and debt securities.
Capital Markets Instrument
In the financial services industry, Capital Market Instruments are assorted financial
instruments issued by organizations to raise capital for funding operations. Participants are
made up of interested parties that choose to supply or acquire the capital funding through such
vehicles. Derivatives, debt instruments, equities and foreign exchange instruments that are
traded in highly liquid markets represent the instruments. In the PeopleSoft financial analytic
applications, Capital Market securities refer to instruments that are bought/sold by the
institution for its own investment account. The capital markets set the product prices and
interest rates.
CAP Sequence Number
The number that distinguishes a small project belonging to a CAP plan. Budgeted assets can
be associated with an overall CAP Plan and a CAP Sequence, if that level of detailed tracking
is desired.
Carry-Forward
Residual contributions that remain in a stock purchase participant’s account after the purchase
of shares that are used toward future purchases.
Carrying Cost
In PeopleSoft Inventory Planning, a value that shows the cost associated with holding a dollar
of inventory for one year. The value is presented as a percentage.
Case Officer
In Germany employees in your company are designated as Case Officers, and have
responsibilities for handling health and safety incidents.
Cash Balance Accounts
The PeopleSoft Pension Administration function that tracks the activity in an employee’s
hypothetical account under a cash balance plan.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
35
GLOSSARY
Cash Balance Plan
A defined benefit plan designed to look like a defined contributory plan. The plan
periodically credits a percentage of pay to each employee's hypothetical account.
Cash Compensation
In PeopleSoft Workforce Analytics, Cash Compensation is a component of direct
compensation. Cash Compensation consists of direct cash payments made to an employee for
base compensation and short-term variable compensation.
Cash Exercise
At the time of exercise, the optionee is required to pay in cash the total option price plus any
withholding taxes due to the company.
Cash Flow Generator
This is a support module for the PeopleSoft financial services analytic applications. It
generates actual and projected cash flows for financial instruments by using output from the
other support modules, such as loan prepayment rates, deposit runoff rates, product pricing
indices, discount rates, and product definitions (such as start and end dates, balance amount,
interest rate, term, payment dates, repricing and compounding frequency, and accrual basis) to
generate the cash flows. The Financial Performance Measures module accesses the cash flow
results to calculate the required financial measures.
Casual Preparer
An additional user role at the lowest level of budget preparation for a budget center. This user
performs the same activities as the Budget Preparer role when access is granted. The system
does not, however, enable the Casual Preparer role to define their own private views for lineitem budgeting.
Casual Work Assignment
The temporary assignment of an employee to a work position or location to meet the needs of
the business. Typically, there is no Human Resource activity to support the work assignment
(that is, a new Job record is NOT created). Often compensation rules that accrue to the
temporary assignment override the compensation rules that apply to the employee's normal
work assignment. See also Borrow/Loan.
Catalog
The list of transactions, classes, and queries used to interface to the external system.
Integration users are presented with this list when they pick the type of Business Interlink
Plug-in they are going to use. There are four types of catalogs: transaction, class, operator, and
configuration parameter.
Catalog
A way of organizing your training courses into classifications for increased flexibility.
Catalogs consist of categories and subcategories.
GLOSSARY
36
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Category
Categories are the primary level of a two-tier structure of training courses. Categories can
consist of subcategories that provide further course definition.
Category Tree
A hierarchical structure that groups products by category to control how they are displayed in
PeopleSoft eStore web pages. Used also by Mobile Order Management to enable product
information to be accessed by a wireless device.
CBM
See PeopleSoft Customer Behavior Modeling.
Census Metropolitan Area (CMA) Code
In Canada this code is prescribed by the government and refers to the area of an urbanized
core with a population of at least 100,000.
Central Personnel Data File (CPDF)
Two types of reporting made by agencies to the OPM include the Dynamic and Status files
(quarterly and monthly, respectively) covering a range of employee personnel/payroll data.
Certain and Continuous Payment Option
A form of pension payment where the benefit is paid out for the lifetime of the participant
with a specified number of payments guaranteed so that a beneficiary will receive payments
until the end of the guarantee period if the employee dies before the guaranteed payments are
complete. For example, under a ten-year certain and continuous payment option, a retiree who
lives less than ten years receives payments until death, then the retiree's beneficiary continues
to receive payments for the remainder of the ten year period. A retiree who lives longer than
ten years continues receiving payments after the ten year period until death. Also knows as a
"Term Certain and Continuous" payment option.
Certain Only Payment Option
A form of pension payment where the benefit is paid out entirely over a specified period of
time—usually five, ten, or fifteen years—with no ongoing payments after the specified period.
If the retiree dies before payment period is over, the remaining payments are made to a
beneficiary. Also known as a "Term Certain" payment option.
Change To Lower Grade
•
For positions under the General Schedule or under the same wage grade schedule, a
change-to-lower grade changes the employee to a lower grade; and
•
When both the old and new positions are under the same type ungraded wage
schedule, or in different pay-method categories, a change-to-lower grade changes the
employee to a position with a lower rate of basic pay.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
37
GLOSSARY
Charge Out
A Material Issue used when the item is scheduled for future return.
ChartField
A field storing a chart of accounts, resources, and so on, depending on the PeopleSoft
application. ChartField values represent individual account numbers, department codes, and
so forth.
ChartField Balancing
PeopleSoft enables you to set up ChartFields and indicate that you want specific ChartFields
to match (balance) on the debit and the credit side of a transaction. When you work with
Controlled Budgets, the Fund and Budget Period are already set up in the system to balance (
match). For example, suppose you want to balance by Class and Program. You indicate that
these on a panel that these ChartFields are required, along with Fund and Budget Period which
should already be selected. When you enter a transaction, you must enter the same Class,
Program, Fund, and Budget Period ChartFields on both sides of the accounting entry. but you
can modify any ChartFields, other than these four, on the user-defined line. The system
always requires that total debits equal credits.
ChartField Combination Edit
Also called Combo Edit. The process of editing journal lines for valid ChartField
combinations based on user-defined rules.
ChartKey
One or more fields that uniquely identify each row in a table. Some tables contain only one
field as the key, while others require a combination.
ChartViews
Charts of data in the model, presented through the Worksheet which retains the ability to drag
dimensions on the chart as desired.
Check In/ Check Out
The process of retrieving planning activities from the BAM database (check out) and posting
changes and results back into the database (check in).
Child
A node or detail on a tree linked to another, higher-level node (referred to as the parent).
Child nodes—projects, customers, and so on—can be rolled up into the parent. A node can be
a child and a parent at the same time depending on its location within the tree.
GLOSSARY
38
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Child
A node or detail of a tree linked to another, higher-level node referred to as the parent. Child
nodes can be rolled up into their parent. A node can be a child and a parent at the same time
depending on its location within the tree.
Chunking
Chunking is a PeopleSoft Enterprise Warehouse mechanism that makes voluminous
processing easier through the use of multiple small parallel processes. By enabling chunking,
multiple jobs are spawned from one Jobstream. These jobs run in parallel (behind the scenes)
to process data efficiently.
Citizenship Code
Numeric indicator as to whether the employee is a U.S. citizen or a foreign national serving in
the U.S. The codes are:
•
citizen
•
other
Civil Service Retirement System (CSRS)
A retirement plan available to employees of the federal government. CSRS covers all
employees appointed to a position in the federal government before January 1, 1984.
Coverage includes a basic annuity plan with employee contributions and the Medicare
Hospital Insurance component (1.45%) of the Social Security tax.
Class catalog
Lists classes used to interface to an external system. A class contains data members of basic
types and/or objects that are typed after another class. A Class can also contain lists of basic
types or objects.
Class ChartField
A ChartField value that identifies a unique appropriation budget key when you combine it
with a Fund, DeptID, and Program Code as well as a Budget Period. Formerly called “subclassification.
Classification Code
Need App A code that categorizes an engineering change. Example classification codes
include the following: Mandatory, Optional, Upgrade, Quality, and Safety.
Clock Hour Reporting
Method of reporting time by recording actual times in and out (start and stop) (see Time
Reporting).
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
39
GLOSSARY
Clone
To create a unique copy of an object. When used in PeopleCode, clone will always mean to
make a unique copy. Copy, on the other hand, may or may not mean making a unique copy.
Copy may mean making a new reference to an object, so if the underlying object is changed,
both the copy and the original change.
Cloning
The process that enables you to copy run controls to create employee schedules from existing
Run Control ID’s that have already been executed and saved.
Close Date
The date in which time entry is no longer allowed for a given pay period. Defined as an offset
number of days to the pay period end date.
Close Price
The price of the final trade for a security at the end of the trading day.
Closure Calendar
A calendar that establishes closure dates for shipping, receiving, and materials management
operations for a specific Business Unit. Typically, application processes account for these
closure dates when determining Lead Time and dates for anticipated fulfillment processing
dates (scheduled shipment dates, scheduled arrival dates, and lot retest dates, for example).
CMA (Census Metropolitan Area) Code
In PeopleSoft Workforce Analytics, the CMA code is prescribed by Statistics Canada, and
refers to the main labor market area of an urbanized core with a population of at least 100,000.
COBRA (Consolidated Omnibus Budget Reconciliation Act)
In PeopleSoft Workforce Analytics, this refers to legislation that requires employers to offer
continued health care coverage to employees, and their dependents, who lose benefits
coverage under certain defined conditions such as voluntary termination, divorce, becoming
an overage dependent, or retirement. Any individual, whether employee or dependent, that is
covered under a health plan at the time of a qualifying event, has the option to elect COBRA
coverage.
Codepage
One character set.
Collection
To make a set of documents available for searching in Verity, you must first create one or
more collections. A collection is set of directories and files that allow search application users
to use the Verity search engine to quickly find and display source documents matching various
search criteria. A collection is a set of statistics and pointers to the source documents, stored
GLOSSARY
40
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
in a proprietary format on a file server. Since a collection can only store information for a
single locale, PeopleSoft maintains a set of collocations (one per language code) for each
search index object.
Combined Federal Campaign (CFC)
A vehicle used by federal employees to contribute to a charity or charities of their choice.
Commercial-Off-The-Shelf (COTS)
Equipment or software that is currently sold commercially to at least one customer.
Commission Tax Method
A payroll tax calculation method that adds year-to-date earnings to earnings for this pay
period and finds the annualized gross by multiplying by the number of pay periods in the year;
the gross is then divided by the number of tax periods specified on the paysheet. This method
is used for Canadian processing only.
Commitment Control
Commitment control includes budget control and commitment accounting functionality.
Common Shares Issued and Outstanding
Represents the residual ownership interests in the corporation. This is the composite number
of shares available and tradable on the open market.
Community Background
In the United Kingdom Community Background refers to the religious category, such as
Catholic or Protestant, of employees, job applicants or appointees. See the Northern Ireland
Report for more information.
Compa-Ratio
In PeopleSoft Workforce Analytics, Compa-Ratio is most commonly defined as the
relationship between current pay and the midpoint calculated as: (Incumbent
Pay/Midpoint)*100. Usually expressed in whole numbers, or in percentage form by dropping
the multiplication operation. Much less common is the use of a compa-ratio calculation as:
range midpoint/market rate.
Compensation Frequency
In PeopleSoft Workforce Analytics, this is the frequency at which a job is paid. This is the
value you use for reporting or quoting pay. Examples include Annually, Monthly and
Weekly.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
41
GLOSSARY
Compensation Planning
In PeopleSoft Workforce Analytics, this is the process through which employee compensation
plans are defined, and compensation budgets are allocated throughout an organization. Major
components of compensation planning include designing pay structures, setting individual pay
levels, and budgeting and forecasting compensation spending.
Compensation Rate
In PeopleSoft Workforce Analytics, this is the compensation rate for a job. This is the rate the
company uses for quoting and reporting pay.
Comp time (compensatory time)
A PeopleSoft Time and Labor-managed employee benefit where time off is granted in
exchange for time worked based on customer-defined criteria; is associated with an expiration
and is used as reported time (see Attendance).
Compensation
The process by which a worker is remunerated for services rendered to, or work performed on
behalf of a business entity.
Compensation Package
All of the base and non-base components on a job row.
Compensation Rules
Business methodology or logical process that is applied to reported time in order to determine
payable time (see Time Administration).Competency
In PeopleSoft Workforce Analytics, Competency is a knowledge, ability, skill,
accomplishment, or National Vocational Qualification (NVQ).
Competency Inventory
All of the roles, tasks, competencies and accomplishments possessed by the workers in the
current workforce. This data is migrated from internal source systems into the data warehouse
tables of the PeopleSoft Enterprise Warehouse.
Competency Strategy
The type and number of roles, tasks, competencies and accomplishments essential to
accomplishing a business scenario based on your strategic business goals.
Competitive Appointment
An appointment to a position in the competitive service following open competitive
examination or under direct-hire authority. The competitive examination, that is open to all
applicants, may consist of a written test, an evaluation of an applicant's education and
GLOSSARY
42
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
experience, and/or an evaluation of other attributes necessary for successful performance in
the position to be filled.
Competitive Service
All positions as defined by 5 USC 2102 in the executive branch of the Federal Government
are in the competitive service unless they are specifically excluded from it. Positions in the
legislative and judicial branches are outside of the competitive service unless they are
specifically included.
Compress
The act of placing a Planning task as early as possible in the schedule without violating any
constraints.
Compressed Split
In PeopleSoft Demand Planning, an optional function that allows a split database to be
compressed so it can be transferred to an account manager’s computer.
Concurrent Offerings
Multiple stock purchase offerings that are active and outstanding at the same time. The end
date is measured from the employee’s grant date.
Concurrent Processing
The situation in which you run multiple batch processes at a time. In PeopleSoft Benefits
Administration, for example, simultaneous open enrollment and event maintenance qualifies
as concurrent processing.
Configuration Code
A unique 50-character identification code that accurately tracks and costs inventory with the
PeopleSoft Product Configurator. It corresponds to a lot number for a non-configured item.
Configuration Costing
The overall process of reviewing and evaluating anticipated cost data for a configured item.
Configuration parameter catalog
Used to configure an external system with PeopleSoft. For example, it might set up
configuration and communication parameters for an external server.
Consolidate Assets
In PeopleSoft Asset Management, the process of consolidating multiple load lines, usually
coming from a separate application, into one asset.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
43
GLOSSARY
Consolidate Depreciation
In PeopleSoft Asset Management, the process of summing all open Add and Adj transactions
by transaction type, Transaction Date, and accounting date for all composite members
reporting to one composite asset.
Consolidated Bill
A grouping of bills gathered together for invoice presentation. The bills belonging to a
consolidated bill are invoiced and printed together, with a page summarizing the bills as a
group.
Consolidations
The PeopleSoft Pension Administration functions that accumulate hours, earnings, and
pension contributions based on payroll data.
Consolidations-Elimination Set
A related group of intercompany accounts that is processed during consolidations. Once
eliminated, this group of accounts should normally net to zero.
Constraint
A limit to a schedule, that, when violated, must be repaired to produce a valid schedule. Userconfigurable Planning constraints include Missed Request Dates, Missed Promise Dates, BI
Shortages, RM Shortages, Capacity Overloads, Missed Inventory Targets, Changeovers, and
Excess Inventory. See also Temporal Constraint.
Constraints
In the PeopleSoft Enterprise Warehouse, a constraint can consist of one or more filters and is
used to define complex business logic. Constraints are based on DataMaps.
Consumption Pattern
In PeopleSoft Activity-Based Management, an attribute used to describe how an activity
interacts with the cost objects to which it has been assigned. A unit type activity can expect to
be performed on a regular basis so that each time a product is produced. A batch type activity
may only be performed periodically for a given range of transactions. For example, each time
a machine is setup to produce another product type. Sustaining type activities generally occur
to support the overall operation of a company unrelated to products produced or customers
served.
Contact
A person associated with a Customer ID. Contacts can be internal contacts or external
contacts. Internal contacts are your employees who manage the relationship with your
customers, from handling billing inquiries to product/warranty questions, to basic
product/service questions. Interactions with customers can be recorded via PeopleSoft
Conversations. Self service interactions can be recorded through PeopleSoft Contact Us.
External contacts are your customer’s representatives who can access self-service transactions
GLOSSARY
44
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
and receive documents such as sales order acknowledgements. Contacts must have a User ID
to access self-service transactions.
Contact Us
A method by which customers and unregistered guest users send email messages to specific
addresses or members of the merchant’s organization. Merchants can also define automatic
response messages.
Container
An Inventory stock unit for receiving, putaway, bin to bin transfers, picking, shipping,
adjustments, and physical accounting. Each container is associated with a unique container
ID.
Content Reference
Content references are pointers to some kind of content registered in the portal registry. These
are typically either URLs or iScripts. Content references fall into three broad categories:
target content, templates, and template pagelets.
Contextual reference
PeopleCode refers to a row or buffer field determined by the current context; that is, the
context in which the PeopleCode program is currently executing.
Contingent Beneficiary
In PeopleSoft Pension Administration, any non-spouse pension beneficiary, including a child,
other relative, or a trust. Spousal consent is required in order for an employee to name a
contingent beneficiary.
Contracting Officer (CO)
Individual who has the authority and the official responsibility to produce a sound acquisition
document.
Contracting Officer's Technical Representative (COTR)
Individual responsible for monitoring a contract and its associated tasks and deliverables.
Contractor
Any individual or non-employee reporting time that will not be paid through the payroll
system.
Contribution
Represents money a stock purchase participant elects to contribute to the plan. Contributions
are deducted from the participant’s paycheck and used to purchase stock pursuant to the
offering and purchase period they are enrolled.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
45
GLOSSARY
Contributory Plan
A Pension plan to which employees contribute. Contributions are typically a percentage of
pay deducted from the employees’ paychecks.
Control Budget
Commitment control enables you to establish budgets that provide extensive, active budgetary
controls over transactions, rather than just passively recording transactions.
Control ChartField
A control ChartField is a key ChartField that you designate to be the control field. Designating
a ChartField as the control allows you to set attributes for a specific value of the ChartField
that are different from the attributes specified for the budget type in general. For example, if
the tolerance for a Projects budget type is set to 10% in general, you can override this value,
making it higher or lower for specific projects.
Control Group
A mechanism to relate vouchers together for the purpose of controlling voucher input into
PeopleSoft Payables. Generally used for assigning vouchers to data entry personnel and for
reviewing input.
A set of parameters that determines the major forecast process options. The Control Group
code is assigned to a group of Forecast Item and controls the forecast development and
tracking for each item in the group.
Control groups are used by the Analytic Forecast Component to govern particular properties
of the forecast rule, such as what accuracy to expect and what statistical method to apply.
Forecast elements are assigned to exactly one control group. They manage differences among
forecasts within a set.
Control Hierarchy
The relationship between business units, origins, vendors, and control groups in PeopleSoft
Payables that defines which processing data will be automatically entered on each voucher.
Control Number
A sequential identifying number used to identify an exercise.
Control Plan
In PeopleSoft Quality, a plan that brings together application, measurement, and control and
response criteria for a specific product and process.
Conversation
Any notes, transcript, or detail of a telephone call between an employee and a customer.
Conversations may be tied to items, payments, purchase orders, document references, or bills
of lading.
GLOSSARY
46
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Conversion data profile
A conversion data profile takes the values from a particular PeopleSoft database table (such as
the table holding bank transaction codes) and specifies how that value appears in PeopleSoft
Business Documents.
Conversion data profile
A conversion data profile takes the values from a particular PeopleSoft database table (such as
the table holding bank transaction codes) and specifies how that value appears in PeopleSoft
Business Documents.
Conversion Loader
A sample SQR delivered with PeopleSoft Asset Management that transfers data from multiple
fixed-length ASCII files into sample, relational conversion tables.
Copy Bill
In PeopleSoft Billing, the online environment providing for the replication of a single bill,
generating a new bill with its own unique invoice number.
Core Functionality
Core functionality is the set of information in PeopleSoft HRMS that is common to your entire
global workforce tracking needs—and is always displayed on the primary page.
Core hours
The hours a workday, workweek or pay period in which a time reporter must be present for
work in a flexible work schedule (see Scheduling).
Corporate Account
In PeopleSoft applications, this is equivalent to the Account (ACCOUNT) ChartField. The
term is used to make a distinction between the chart of accounts typically used to record and
report financial information for management, stockholders, and the general public, as opposed
to a chart of statutory (Alternate ) accounts required by a regulatory authority for recording
and reporting financial information.
Corporate Reporting
Companies with more than $10 million in assets whose securities are held by more than 500
owners must file annual and other periodic reports. Publicly held companies are required to
file documents with the SEC which include:
•
Registration statements for newly-offered securities
•
Annual and quarterly filings (Forms 10-K and 10-Q)
•
Proxy materials sent to shareholders before an annual meeting
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
47
GLOSSARY
•
Annual reports to shareholders
•
Documents concerning tender offers (a tender offer is an offer to buy a large number
of shares of a corporation, usually at a premium above the current market price)
•
Filings related to mergers and acquisitions
Corporate Repurchase
When a corporation elects to repurchase some of it’s own securities. This reduces the
Common Shares Issued and Outstanding. Typically, used to improve the valuation of the
company’s common securities outstanding as well as the Earnings Per Share (EPS).
Correction to IRR
An IRR type used when corrections need to be made to an original IRR that has already been
submitted to the Office of Personnel Management (OPM). Federal employees covered by the
CSRS retirement plan require SF-2806-1. Federal employees covered by the FERS retirement
plan require SF-3101. A Correction IRR is also used if original retirement deductions were
over-reported. See also Individual Retirement Record (IRR).
Correspondence Customer
A customer to whom all correspondence (statements) is addressed, often a corporate customer
receiving correspondence for associated child customers.
Cost Accounting
A method where business costs are accumulated and distributed to products, processes, or
discrete undertakings on an equitable basis. There are a variety of cost accounting methods,
but they all share the same basic functions. classifying costs, recording costs, allocating costs
to products or activities, summarizing and reporting costs to management. Cost accounting
requirements and financial accounting requirements are not necessarily synonymous.
Cost Assignment
Resources assigned to cost objects or activities.
Cost Basis
Typically, this refers to the original price of an asset used in determining capital gains.
However, in the case of death of an optionee, the appraised value of the asset at the time of
death is the cost basis.
Cost Center
A Time and Labor Business Unit, in which all related costs attributable to some center within
a business (such as an activity, an organization, or a program), are segregated for accounting
or reimbursement purposes.
GLOSSARY
48
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Cost Element
See Inventory Cost Element and Manufacturing Cost Element.
Cost Flow
Determines how depletions will occur for purposes of costing a transaction. Cost flows
available include Specific Lot ID, Specific Serial ID, FIFO, and LIFO.
Cost Objects
Cost objects represent cost information about products, customers, and channels. They are the
final results of the activities performed by your business, representing the focal point of
costing and profitability analysis. Examples are products, customers and channels. They are
the final results of the activities performed by your business. Your model’s resources and
activities are linked to the cost objects. They are often the focal point of profitability analysis.
Cost of Capital
An attribute used to describe the behavior of a particular cost object. A primary cost object is
typically the main focus of the activity-based management analysis. This may be a product,
customer or channel that you wish to calculate cost for. A support cost object may be used in
a similar manner but may be further allocated to other support cost objects or primary cost
objects.
Cost Of Living Allowance (COLA), Non-Foreign
A cost-of-living allowance payable to an employee at a location in a non-foreign area where
living costs are substantially higher than those in the Washington, DC area.
Cost Profile
A combination of a receipt cost method, a cost flow, and a deplete cost method. A profile is
associated with a cost book and determines how items in that book are valued, as well as how
the material movement of the item is valued for the book.
Cost Profile Group
A grouping of items for the purpose of costing transactions and valuing inventory for a given
book. Assigning an item to a cost profile group determines the books used by the item when
accounting for that item.
Cost Roll-up
A process for calculating item costs. Cost roll-up provides a summation of all of the costs
associated with the bill of material structure and the routing used in producing the item.
Cost Row
A cost transaction and amount for a set of ChartFields.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
49
GLOSSARY
Cost Template
A collection of cost components that you can apply to a group of purchased items.
Cost Type
A user-defined method of categorizing item costs in Manufacturing for simulations and whatif analysis. Examples of cost types include current costs (which reflect the item's current bill
of material or routing), proposed costs (which could be used in preparation for the next
standard cost period), or activity-based costs (which include costs for items that consume a
given activity).
Cost Version Type
A combination of cost types and cost versions used in cost rollups. Valid values include
production (rolls up only manufacturing data and uses only the primary BOM and routing,
each with a code of 1), engineering (can roll up with either manufacturing or engineering data,
with any combination of BOM/routing codes), or simulation (only rolls up with manufacturing
data, but can use any combination of BOM/routing codes).
Count Grade
A user-defined evaluation of a counting event.
Count Point
A predefined step on a routing or operation list where you can gather operation completion
information. You define the appropriate points on the routing, record completions at these
count points, and the system automatically backflushes the prior operations. This is only used
on production IDs.
Counts
Count elements allow you to count the number of days or hours from a specific period of time.
Counts are used primarily during proration calculations, but can potentially be utilized in other
situations as well.
Court-Ordered Benefits Coverage
As prescribed in Title 5, United States Code and Title 5, Code of Federal Regulations, court
orders that stipulate that an employee must continue or begin the coverage features for all
employee benefits must be enforced. Federal employees are mandated by court orders to
continue covering or begin covering their former spouses and/or children under their federal
employee benefit programs (health, life, and thrift savings).
Court-Ordered Garnishments
As prescribed in Title 5, United States Code and Title 5, Code of Federal Regulations, court
orders enforcing child support, alimony, or collection of commercial indebtedness are served
on the appropriate entity within the Federal agency and implemented as offsets against the
employee's salary.
GLOSSARY
50
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Coverage
An employee’s chosen benefit plan and coverage level; that is, what sort of benefit is provided
as well as the value.
CPAM (Caisse Primaire d'Assurance Maladie)
In France, CPAMs are the local social security offices that manage health coverage for French
workers. CPAMs are regulated and established by the French government. If you’re
managing a French workforce you’ll need to identify and track the CPAM offices that impact
your enterprise.
CRAM (Caisse RГ©gionale d'Assurance Maladie)
In France, CRAM is the regional social security body which oversees the running of CPAMs.
CRAM offices work with companies to both prevent and compensate workers for industrial
injury.
Create Date
The date that you extracted a deduction or offset to PeopleSoft Deduction Management or
created a split deduction.
Create Missing Items
In PeopleSoft Demand Planning and Inventory Planning, a feature that enables automatic
system generation of master records that don’t exist in the system.
Created Time
Time collecting device time or elapsed time generated by the system based on the time
reporter’s schedule (see Time Administration)
Creating Time
The preliminary generation of time segments as close as possible to their likely values when
you officially report time—so that the information on the time records is as fresh and current
as possible. The system shows you time that has already been created, rather than you having
to create it “on the fly” when you come in to report. The process fills in reporting day gaps as
defined by work schedules.
Credit Analyst
A required field used in PeopleSoft Receivables, Billing, Order Management, and Deduction
Management when working with items. Each item must be assigned to a credit analyst. If no
credit analyst is assigned to an item, the credit analyst assigned to the customer is used as the
default.
Credit Risk Spreads
In the financial services industry, the additional charge to a risk-free interest rate, based on a
riskier credit rating.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
51
GLOSSARY
Credits
See Flexible Credits.
CREF
Acronym for Content Reference.
Crew Reporting
A Time and Labor process that enables you to report the earnings which consist of one or
several time reporting codes and associated quantities of hours, amounts, or units, and task
information for one date under report for a user-defined crew. The system transforms the
information into instances of daily time for each crew member for the entered date.
Critical Success Factors (CSFs)
In PeopleSoft Balanced Scorecard, things that an organization must do well or excel at to
achieve its goals. One or more key factors or objectives that must be accomplished for a
particular strategic thrust. Key Performance Indicators are attached to CSFs.
CRM Warehouse
See Warehouses.
Cross Border Walker
This term is used in Europe for an employee who lives near a border in one country and works
in another country. Such employees are subject to different tax and social security rules.
Cross-Plan Validation
The process by which the PeopleSoft Benefits Administration determines enrollment
prerequisites for benefit plans. You can define four types of cross-plan validation
prerequisites: prerequisites based on plan types, benefit plans, dependent enrollments, and
coverage percentage limits for Life and AD/D plans.
Cross-View Reconciliation
In PeopleSoft Demand Planning, a process that enables the balancing of forecasts between
selected levels of related views with the same Forecast Item key. The process is used when
adjustments have been made to a working view and are then required in a related view.
Cube
See Multidimensional Database (MDDB).
Cube View
In PeopleSoft Demand Planning, defines the user's own view of a forecast. The parent
working view and dimensions determine what forecast data is included and how aggregates
are formed.
GLOSSARY
52
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Cumulative Tax Method
A payroll tax calculation method that adds together year-to-date earnings and earnings for the
current pay period, then annualizes the result before calculating tax. This method is useful
when Payrolls vary greatly in amounts from pay period to pay period, such as in the case of
sales commissions.
Currency Calendar
In the financial services industry, business calendars for markets outside the organization’s
domestic operations that reflect the foreign markets’ holiday schedules.
Currency Conversion Engine
A PeopleSoft Enterprise Warehouse Engine that processes financial information in multiple
currencies.
Current Period
The earliest pay period for which the close date has not passed (see Time Reporting).
Current Period (Time and Labor)
In Time and Labor, the employee's current pay period which will be determined via the
employee's Pay Group affiliation. Although there can be only one definition of Current Period
per installation, the user can change it manually.
Current View
A reporting screen in Time and Labor whose effective date is within the date boundaries of an
employee's current pay period, and for which pay has not yet been confirmed. A Future Time
Reporting Transaction is one that has an effective date after the last day of the employee's
current pay period. An Historical Time Reporting Transaction is one that has an effective
date before the first day of the employee's current pay period.
Current Year
A period for event maintenance processing.
Curve Generator
A supporting module (common to financial services industry applications) that enables you to
construct curves used to determine appropriate interest rates for given maturities and / or time
periods. You can import market data from outside sources such as Bloomberg, upload the
data from a spreadsheet, or manually enter the data. You can then build configured curves
from segments or combinations of other curves.
CUSIP Number
A nine digit alphanumeric number associated with issuers’ securities. CUSIP (Committee on
Uniform Securities Identification Procedures). A uniform numbering system widely used to
identify specific securities and their issuers.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
53
GLOSSARY
Custom Statement
A user-created logical or mathematical expression that determines information about an
employee in PeopleSoft Pension Administration. Custom Statements commonly define
employee groups and benefit formulas.
Customer Inquiry
A window containing options to review customer balances, aging, history, items, actions, and
conversations.
Customer Scorecard
See PeopleSoft Customer Scorecard.
Customer Tree
A user-defined graphical representation of your current sales organization. A customer tree is
used to establish and distribute funds and to determine authority levels for promotional
activities.
Cut Session
Cut sessions are a means of dividing a course session. You use cut sessions where a course
session does not run on consecutive days from start to finish, or if there are multiple
instructors or locations. Each cut session has it’s own start/end date, location, and instructor.
For example, if you have a course that runs for two days a week for a month, you would
divide the course session into four cut sessions, each of which is two days long.
Cycle Count
A manual counting event that does not cover an entire inventory business unit. Usually
includes every item (and lot, if applicable) in a location or family.
Cycle Interval
The number of days between cycle counts.
Cycle Procedures
Inventory planning tasks that need to be performed on a regular basis to ensure an up-to-date
Inventory Policy. The tasks can be performed either at the end of a processing period or
within the period, and should always be performed if the forecast or Control Group or Policy
Item parameters change. Tasks include generating a policy and reviewing Work Queue
messages.
GLOSSARY
54
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
D
DAT file
A text file (input.dat) used with the Verity search engine that contains all of the information
from documents that will be searchable but not returned in the results list.
Data Elements
Data elements, at their most simple level, define a subset of data and the rules by which to
group it.
For PeopleSoft Balanced Scorecard, data elements are used as the basis for key performance
indicators, and as target values for Key Performance Indicator (KPI) objects.
For Workforce Analytics, data elements are rules that tell the system what measures to retrieve
about your workforce groups.
Data Entry Access List
Used to present a concise list of often-performed data entry tasks to a user. You can assign
multiple control plans to a single data entry access list.
Data Extract
A report that creates a file used to transmit data to a third party on magnetic media. There is
no meaningful printed output for this type of report.
Data Loader
Data Loader is a PeopleSoft Enterprise Warehouse utility that moves data from the
Operational Data Store staging area to either the ODS reporting area or the Data Warehouse.
The Data Loader utility is made up of several pages that allow you to enter Metadata to define
your source and target records and your transformation rules and then perform the load by
running an Application Engine.
Data Loader Map
Defines how to extract data from the Operational Data Store (ODS), transform it, and load to a
Target Table. The target table can reside in the warehouse or the ODS layer.
Data Manager
A PeopleSoft Enterprise Warehouse engine that distributes revenue, expense, analytical
application engine results, statistical quantities and other measures across business units,
departments, products, customers and channels—any field or logical group in the chart of
accounts. You can define a number of types and options within this engine. It is also used as
a means of posting to the Performance Ledger.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
55
GLOSSARY
Data Manager Rules
In the PeopleSoft Enterprise Warehouse, Data Manager rules use Constraints to specify the
source as well as the target tables for moving, aggregating, or multidimensionalizing your
engine output. Rules use Data Manager methods to enrich the PeopleSoft Enterprise
Warehouse data.
See Data Manager Methods.
Data Manager Methods
There are several methods: Copy, GL Mapper, Prorata, Spread Even, and Tree Aggregation.
Each method enables you to move and/or enrich engine output.
Data Mart
A Data Mart is a data structure that uses a central fact table and related dimension tables to
generate a “relational cube” or directly generate an Insight report.
Data Mart Builder
The Data Mart Builder is a multiple Application Engine (AE) process, that is, a framework of
procedural programs, that creates a Data Mart.
DataMaps
Information that builds upon the data captured in the TableMap records. DataMaps enable
you to define a logical view of the physical PeopleSoft Enterprise Warehouse tables.
DataMaps bring together information from many different tables and fields and define it all as
one entity or table.
Data Row
Contains the entries for each field in a table. To identify each data row uniquely, the system
uses a key consisting of one or more fields in the table.
DataSet
DataSets are used as input for various engines and processes, for instance, the Analytic
Forecasting component, the Data Manager, user defined functions, drivers in Activity-Based
Management, and data elements in the Key Performance Indicator Manager. DataSets provide
a user defined set of information to the engines. DataSets use Constraints to restrict used
columns and restrict returned rows. Each DataSet is created by a process specific setup.
However, the underlying logic is the same, enabling you to more easily understand the
functional aspects of the process.
Data Warehouse
A large database containing data summarized from one or more transactional systems,
optimized to support the analysis needs of the enterprise. An ideal data warehouse contains all
the data necessary to make business decisions. Users analyze the data in the warehouse using
Online Analytical Processing (OLAP) tools and ad hoc query/reporting tools. An increasing
GLOSSARY
56
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
number of organizations have "virtual" data warehouses, where the data warehouse is not one
physical database, but rather a collection of specialized (and distributed) data marts.
See also PeopleSoft Enterprise Warehouse.
Data Warehouse Tables
Data Warehouse tables act as the portal for getting data into the PeopleSoft Enterprise
Warehouse from PeopleSoft, OLTP applications or other “outside” sources. These tables are
used:
•
As targets for loading operational data.
•
For error detection and handling
•
For data validation.
•
For aggregation.
Database Alias
The PeopleSoft Pension Administration utility that looks up employee data.
Dataset
A file containing data to be analyzed by the Quality Server program. The dataset is similar in
content to a spreadsheet.
In PeopleSoft Planning, a file that stores schedule information such as tasks, resources,
calendars, and so on.
Date
See Accounting Date Transaction Date or Effective Date.
Date
If you want to either include a date in a calculation, or determine a new date by taking a
starting date and either adding or subtracting a period of time to come up with another date,
you use a date element.
Date Classified
Date the Position Description is approved by Management/Position Management.
Date Eligible To Retire
Date an employee is eligible to optionally retire based on the combination of age and service
that meets legal requirements.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
57
GLOSSARY
Date Under Report
The date (day) in PeopleSoft Time and Labor for which time is being reported. The Date
Under Report does not have to equal today’s date.
Day Breaker
Customer defined time that is used to determine when one day becomes the next. It’s used to
determine the “logical” date of a punch. (See Understanding Workgroups.)
Days Supply
In PeopleSoft Inventory Planning, a method that can be used with several types of Inventory
Policy. Using this method, a specific number of days of supply for an item should be used to
calculate the item's inventory policy.
Deal Type
PeopleSoft Treasury has categorized deals into several basic deal types from which you can
choose when defining an instrument.
Death Coverage
The PeopleSoft Pension Administration function that determines the factor used to reduce an
employee’s benefit when the plan charges for PRSA coverage.
Decompressed Split
In PeopleSoft Demand Planning, a function for returning a compressed split database to its
original form. See also Compressed Split.
Deduction
Any amount taken from an employee’s pay check each pay period. Deductions may include
health or medical benefits, union dues, and so on. See also Benefit Deduction and General
Deduction.
Deduction Date
The as of date for the deduction item in PeopleSoft Receivables.
Deduction Item
An individual item that you created in receivables and is an open receivable on the customers
account due to a deduction that they took in a payment for a receivable item.
Deduction Reason
Code that describes the type of deduction. When assigned to a write-off resolution, it
determines what accounting entries to create.
GLOSSARY
58
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Deduction Specialist
The individual responsible for tracking and resolving deductions in PeopleSoft Deduction
Management.
Deduction Subset
A group of deductions selected from a company’s standard set of deductions. Deduction
subsets minimize data entry time in special processing situations such as bonus check runs.
Default Mode (DM) model
In the financial services industry, an approach used by financial institutions to predict a
decline in portfolio value. Only two outcomes are considered – default or non-default. If the
debt does not default, there is no change in the value. If the debt does default, then the loss is
calculated as the difference between what was contractually owed and the value of any
collateral recovered.
Defection Analysis
In PeopleSoft Workforce Analytics, the identification of employees who are likely to leave the
organization based on predefined assessment criteria.
Deferred Compensation
Compensation payments that are payable to an individual in the future such as pension plan
payments, annuities, stock awards and profit sharing. Note: Profit sharing can be considered
direct pay if paid out in cash on a periodic basis or deferred pay if cumulative with the
intention of payment in the long-term future.
Deferred Vesting
The adjustment made to the original option’s vesting schedule that pushes the vesting into the
future.
Defined Benefit Plan (DB Plan)
A retirement income plan (usually called a pension plan) where the employee's benefit is
definitely determinable based on a plan-specified benefit formula.
Definition or Function Definition
The parameters for any of PeopleSoft Pension Administration’s nineteen core functions. A
definition has to be explicitly associated with an employee Group Definition before it can be
applied.
Dekit
The ability to return material issued in kits to inventory. This is used when entire kits need to
be returned; individual components are handled through kit issues/returns.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
59
GLOSSARY
Delete Non-Matching Items
In PeopleSoft Inventory Planning, an option used in the Generation process to delete
Inventory Planning items that don’t have corresponding items in Demand Planning. The item
deletion occurs when the system generates the policy.
Delta
When retroactive processing occurs for a given payee, the system recalculates each element
generated for the payee. The system compares the recalculated results to the original results.
The difference between these results is typically referred to as the retro “delta.” A retro delta
can represent either an underpayment or an overpayment that results in an adjustment to the
payee’s earnings.
Demand
Collection of training requests. This could be an employee demand, a departmental one or a
company-wide demand.
Demand Filter Width
In PeopleSoft Demand Planning, specifies the confidence interval within which demand is
considered to be reasonable. Actual demand that is outside the confidence interval is
automatically filtered and replaced by the value at the edge of the interval. The value is
expressed as a percentage.
Demand Filtering
In PeopleSoft Demand Planning, provides a way to detect and highlight unusual demands and
forecast errors. If the demand falls outside of a band that is considered reasonable, the system
automatically adjusts it to the level of the boundary and logs a message to the Work Queue.
Demand Number
The configured product sub-component sequence number.
Demand Planning
In PeopleSoft Activity-Based Management, this type of planning focuses on studying the
impact of cost objects and activity volumes.
Demand Priority
The placing of importance on independent demand. The Planning engine uses the demand
priority value to determine the order in which you fulfill the demand. You can set a demand
priority from 1 to 998 with 1 being the most important level. The priority value of 999 is
reserved for the system.
Demand Priority Rules
In PeopleSoft Inventory, a set of rules that will sort demand so the most important demand
will have the first opportunity to reserve available inventory. If demand priority rules have
GLOSSARY
60
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
been defined, the Material Reservations process (INPLDMND) sequences orders by priority
rank, processing those with the lowest rank value first.
Deplete Cost Method
Determines how you cost a depletions transaction within a book. The deplete cost methods
available include Actual, Non-Cost, Perpetual Weighted Average, Periodic Weighted
Average, and Value at Current Standard.
Depreciate When in Service
A switch that indicates whether PeopleSoft Asset Management should allocate depreciation as
of the date an asset was placed in service. This is valid only in the year the asset was
acquired.
Depreciation - Declining Balance
Budgeting calculates this as: Cost minus Accumulated Depreciation divided by Life divided
by number of periods per year. It results in a higher depreciation expense in the early years of
an asset, which decreases as you near the end of its useful life.
Depreciation - Double Declining Balance
Budgeting calculates this as: Cost minus Accumulated Depreciation multiplied by 2 divided
by Life divided by number of periods per year. It results in a higher depreciation expense in
the early years of an asset, which decreases as you near the end of its useful life.
Depreciation Methods
The various methods of spreading the aquisition cost across the life of an asset rather than
expense the full value of an asset at the time you acquire it The value of the asset
consequently decreases (or depreciates) through time. The four depreciation formulas
delivered with PeopleSoft Budgeting include: declining balance, double declining balance,
straight line, and sum of the years.
Depreciation - Straight Line
A method of depreciating asset value in equal amounts across the life of the asset. Per-Period
Straight-Line depreciation is calculated as the cost of an item minus the salvage value divided
by the number of periods to depreciate.
Depreciation - Sum of the Years
A depreciation method equal to the value of the remaining years of life divided by the sum of
the years remaining is multiplied by the Net Book Value. This figure is then multiplied by the
percent of years to depreciate. This results in a higher depreciation expense in the early years
of an asset, which decreases as you near the end of its useful life.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
61
GLOSSARY
Depromote
In PeopleSoft Demand Planning, the process of making an adjustment to actual demand data
that removes the effect of a promotion during a defined period. As a promoted period moves
into history, the system creates an adjusted demand entry that is equal to the Prorated
Forecast.
DeptID
A ChartField that defines departments or administrative offices that have operational, fiscal
and/or budgetary responsibility for specific sets of activities.
Derived Metric
The result of a calculation on a report of base metrics.
Detail
A temporary assignment to a different position for a specified period when the employee is
expected to return to his/her regular duties at the end of the assignment. This employee is
considered for pay and strength count purposes to be permanently occupying his/her regular
position. Unless the agency chooses to use an SF50, a detail is documented with an SF52.
Detail Tree
A tree that employs ranges of detail values under each node; you must manually specify the
detail values.
DFI ID (Depository Financial Institution ID)
A PeopleSoft Payables bank identifier, consisting of Transit Number, Swift ID, or CHIPS ID.
Dimension
A single element of a business model, such as product, department, or location. Cube Manager
uses the term Conforming Dimension.
In terms of data analysis, dimensions can be thought of as criteria, such as time, product, and
location, used to pinpoint a particular piece of data. For example, in the retail industry a set of
dimensions could be geography, product, time, customer, and vendor. The geography
dimension would include company, chain, region, district, and finally store attributes. A
dimension is also a column heading on an analysis and reporting template which you can drill
through or roll up to the multiple levels.
In PeopleSoft Budgeting, a view option that assists in summarizing the rows of data in lineitem budgeting.
A single element of a budgeting model, such as account, product, project, department, or
operating unit. In PeopleSoft Budgeting, these dimensions typically represent the ChartFields
used by your organization during your budgeting process.
GLOSSARY
62
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Dimension Table
In the PeopleSoft Enterprise Warehouse, Dimension Tables store additional attributes or data
about Facts. Some example dimensions include Customer, Channel, Geography and Product.
Direct Compensation
In PeopleSoft Workforce Analytics, Direct Compensation is payment made to workers in
exchange for their contributions to the organization. Direct Compensation is typically
categorized as including Cash Compensation and Long-term Variable Compensation.
Cash payments made to workers in exchange for their contributions to the organization.
Direct pay is typically categorized as fixed pay (for example, base pay, shift differentials) and
variable pay (for example, profit sharing, incentive, bonus). Note: Profit sharing can be
considered direct pay if paid out in cash on a periodic basis or deferred pay if cumulative with
the intention of payment in the long-term future.
Direct Calculation
Calculate actual and directly assigned dollars.
Direct Cost
In PeopleSoft Workforce Analytics, a direct cost of an activity or a cost object. An example is
the salary cost of employees working on a project.
Director
An affiliate of the company who holds a seat on the Board of Directors for the corporation. A
Director, generally, is not an employee of the corporation.
Disability and Discrimination Act of 1995
In the United Kingdom this act makes it unlawful to discriminate against individuals on the
basis of their disability in relation to recruitment, promotion, training, benefits, terms and
conditions of employment, and dismissal.
Disability Rate Code
The desired percentage of disabled persons that should be employed by French employers, as
mandated by the French government.
Disbursement View
In PeopleSoft Demand Planning, a Forecast View that allows the forecast from a working
view to be reported on using an alternate key. Disbursement views are built directly from the
working views and inherit many working view attributes, including time period and associated
user data definitions, from the parent working view.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
63
GLOSSARY
Discounted Stock Option
Rights to a stock option at a price less than 100 percent of fair market value at the time of
grant.
Discretionary Plan
In PeopleSoft Workforce Analytics, this is a plan for distributing compensation awards that
provide managers the ultimate discretion over a pool of money which is either funded based
on company, group, or employee performance, or it’s budgeted. The discretionary award
determination is sometimes guided by a pre-determined percent of the participant’s salary,
expressed as an opportunity. This figure can then be modified based upon management’s
perception of actual value created by the group or employee.
Disqualifying Disposition (DD)
When an optionee sells or otherwise disposes of the shares of stock acquired through the
exercise of an incentive stock option or through an employee stock purchase plan before the
holding period for preferential tax treatment has lapsed.
In the case of Incentive Stock Options, the holding period is one year of the date of exercise
and two years of the date of grant. At the time of disposition, the individual recognizes
compensation income equal to the difference, if any, between the option price and the fair
market value of the corporation’s stock on the date of exercise. If the sale price is less than
the fair market value of the stock on the date of exercise, the compensation income is limited
to the total sales price less the total option price, less any fees.
In the case of purchases through an employee stock purchase plan, the holding period is one
year from the purchase date and two years from the enrollment date. Compensation income in
a disqualifying disposition is equal to the difference between the total fair market value on the
purchase date and the total purchase price.
Distribution
Provide a repository of time and associated estimated and actual allocated labor costs to other
systems
The process of assigning values to ChartFields. A distribution is a string of ChartField values
assigned to items, payments, and budget amounts.
Distribution Network
A distribution network is a prioritized list of Inventory business units (IBUs). When a
customer orders a product, the system uses this network to determine which warehouse the
stock ships from.
Distribution Profile
A definition of ChartField distributions assigned for compensation costs. A distribution
profile can be used to set up defaults for how the system should distribute costs associated
with a position’s salary, benefits, and earnings. PeopleSoft Budgeting-specific.
GLOSSARY
64
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Distribution Rule
You use distribution rules to determine the order in which the system searches for matches
against the distribution sets matrix when sales orders are entered.
Distribution Set
Distribution Sets assign account distribution information to combinations of defining elements
used on sales orders.
Distribution Type
An identifier that defines one of the different transactions that move an item into or out of an
inventory business unit. Distribution types are used to create debit and credit transactions to
the general ledger via the Journal Generator.
Dividend
Distribution of earnings back to shareholders, prorated by the class of security and paid
typically in the form of money or stock. The amount of a dividend is decided by the Board of
Directors and is usually paid quarterly.
Document Management
The process through which a user has complete control of document version including the
ability to view, query, and edit documents in a secure vault. Document management enables
you to seamlessly perform online document queries and view documents directly, launching
them from within PeopleSoft applications. You can associate pertinent documents with
engineering change requests (ECR), engineering change orders (ECO), item revisions, bills of
material, manufacturing and engineering routings, production component lists, and production
operation lists.
Document Sequence Number
A value that the PeopleSoft system assigns to a document (such as an invoice, voucher, or
journal) when you create a document for a business unit that you have enabled for document
sequencing. The system determines the number by the values of the business unit, accounting
date, and document type.
Document Sequencing
A flexible method that sequentially numbers the financial transactions (for example, bills,
purchase orders, invoices, and payments) in your system for the purpose of statutory reporting
and tracking of commercial transaction activity. Document sequencing requires that you
classify all financial transactions into three transaction types—journal type, journal code, and
document type—and that within each transaction type, all documents you enter are numbered
sequentially. When you create a document (such as an invoice, voucher, or journal), the
PeopleSoft system assigns a document sequence number to that document.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
65
GLOSSARY
Document Type
The final level of three categories for defining a financial transaction (or document), necessary
when using document sequencing. It represents the business purpose of a financial
transaction, such as domestic customer invoice or customer credit memo. Document type is
within one and only one journal code; journal code is within one and only one journal type.
Document type is the only required category, because the values of the other two categories
can be derived from document type.
Dollar Tolerance
In PeopleSoft Inventory, the acceptable cost difference between expected cycle count
quantities and actual quantities counted. This value allows a margin of error for an item
during cycle count reconciliation based on item cost.
Domestic Relations Order (DRO)
A preliminary version of a court order (usually stemming from a divorce settlement) ordering
a division of a participant’s pension benefits. The order is not in effect until it is determined to
be “qualified” by virtue of meeting certain requirement. At that point it becomes a Qualified
Domestic Relations Order, or QDRO.
Double Byte Characters
If you’re working with Japanese or other Asian employees, you can enter the employee’s
name using double-byte characters. The standard double byte character set name format in
PeopleSoft applications is: [last name] space [first name].
Draft Worksheet
A work space used in PeopleSoft Receivables to track a draft through its processing life cycle.
Drill-Back Calculation
Assigns indirect dollars and Drill-Back calculations. Also, this picks-up all costs in the
Calculations Detail (CALC_DETAIL_F00) that was assigned during direct calculations.
Drill Down
The ability to go down to the next level of detail in a set of data. For instance, if you’re
looking at an expense figure for a division, you can drill down to the expenses for each
department in the division.
Drill Down
The ability to go down to the next level of detail in a set of data. For instance, if you’re
looking at an expense figure for a division, you can drill down to the expenses for each
department in the division.
GLOSSARY
66
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Driver Lookup Table
Tables associated with a driver that enable different rates and amounts unique to a budget
center.
Drivers
In PeopleSoft Activity Based Management, drivers are a means of assigning dollar amounts
from resources, activities, and cost objects to other resources, activities, and cost objects
throughout the model in PeopleSoft Activity-Based Management. Drivers can also be
assigned across business units. There are different types of driver categories (transactional,
duration, and intensity), and different ways of specifying how those dollar amounts are
calculated (amount, percentage, spread even, and direct), as well as different ways that dollar
amounts are assigned (depending on assignment type and object type).
In PeopleSoft Business Planning, a driver can be defined as a set of values that are used as an
input to another process. In this context, a driver should be interpreted as a projection of
external factors and other indicators. The user can the define a relationship between the driver
and a financial result. The driver values and the defined relationship then combine to produce
a projection of the financial result. For example, a projection of the number of square feet used
(driver) and the price per square foot paid in rent (driver) can combine to produce a projection
of rent expense (financial result).
DRO
See Domestic Relations Order.
DSS (Decision Support System)
A DSS is a workstation-based analysis and reporting system, typically aimed at analysts and
line managers. OLAP tools provide a powerful DSS.
Duration
In PeopleSoft Pension Administration, the utility that calculates the length of time between
two dates.
Duration [Global Payroll]
An element type that calculates a period of time between two dates. For example, if you want
to determine a payee’s age, you can calculate the duration between his birth date and the
calendar period end date.
Dynamic Group
A group in Time and Labor that enables you to establish criteria or attributes for a group of
employees. All employees who fit this criteria at processing time belong to the group.
Dynamic Tree
A tree that takes its detail values—Dynamic Details—directly from a table in the database,
rather than from a range of values entered by the user.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
67
GLOSSARY
Dynamic Views
In PeopleSoft Demand Planning, a Forecast View that allows interaction with the forecast
data using an alternate key structure. By using dynamic views, you streamline the working
view and can complete the working-view design without having to anticipate all conceivable
adjustments.
E
Earliest Change Date
Determines both the range of dates and the amount of data that will be processed for each time
reporter (see Batch Processing)
Early Punch
A punch that is more than the predefined number of hours/minutes before a scheduled punch
where a time reporter is warned
Early Retirement Date (ERD)
A retirement date earlier than a plan-specified “normal” retirement date. Employees usually
must meet age and/or service requirements to be eligible for early retirement, and early
retirement benefits are often reduced to compensate for the longer duration of payments.
Early Retirement Factor
The reduction made to an employee's benefit if the employee elects for early retirement.
Early Warning
In commitment control, warning of possible future budget exceptions. You can specify that
you are to receive a warning when commitments and expenditures reach a predetermined
percentage of budget. For example, you can instruct the system to let you know when
commitments and expenditures reach 50%, 80%, or some other percent of a budget.
Early/Late Adjustments
The PeopleSoft Pension Administration function that calculates early retirement factors or late
retirement factors.
Earning Group
Part of a group of defaults assigned to job codes. Earnings group may include non-salaried
items such as holidays and bonus pay dependent on individual company parameters.
Earnings
The amount owed to an employee based on salary, hours worked, or other calculation routines,
plus other types of compensation and holiday, vacation, and bonus pay.
GLOSSARY
68
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Earnings [Global Payroll]
An element type that defines the different types of compensation that are added to a person’s
pay. Examples include salary, commission, bonuses, and retirement pay.
Earnings Accrual Class
Categorizes a set of accruable earnings.
Earnings Code
Codes that represent the various types of earnings such as regular, overtime or leave.
Earnings Per Share (EPS)
The portion of a company's profit allocated to each outstanding share of common stock. Net
income (reported or estimated) for a period of time is divided by the total number of shares
outstanding during that period.
Earnings Type
An abbreviated and encrypted set of business instructions containing compensation
instructions. Earnings Type may also contain Benefit Entitlement and Administration
instructions, taxation instructions, Financial Accounting instructions, Organizational
Administration instructions, work group and labor affiliation instructions, and other
instructions.
Economic Loss
In Funds Transfer Pricing, this refers to the break fund economic loss, calculated by applying
the theoretical value of the interest rate differential (IRD) against a cash flow stream, based on
the amount of the prepayment or cancelled draw-down.
Economic Value Added
In the financial services industry, Economic Value Added is a financial metric that factors into
the measurement of an activity’s profitability the cost of economic capital assigned to that
activity.
EDGAR (Electronic Data Gathering, Analysis, and Retrieval)
An electronic system implemented by the SEC that enables companies to file documents in
conjunction with disclosure requirements mandated by the SEC.
EDI Agent
Used in EDI processing, the inbound EDI Agent loads trading partner data (flat files) into the
PeopleSoft database using transaction, map, and trading partner definitions set up using EDI
Manager. The outbound EDI Agent extracts information from the PeopleSoft database and
generates data files that can then be processed for transmission to a trading partner.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
69
GLOSSARY
EDI Manager
A suite of online pages used to define transaction sets, trading partner profiles, and translation
maps for EDI transactions.
Edit Table
A table on the database that has its own record definition, such as the Department table. As
fields are entered into a PeopleSoft application, they can be validated against an edit table to
ensure data integrity throughout the system.
EEO Company Code
In the United States companies are assigned this federal code for EE0 and VETS100 reporting.
Effective Date
A method of dating information in your system. You can predate information to add historical
data to your system, or postdate information in order to enter it before it actually goes into
effect.
Effective Date
A method of dating information in your system. You can predate information to add historical
data to your system, or postdate information in order to enter it before it actually goes into
effect. The Effective Date usually defaults to your system’s current date.
Effective Periods
In PeopleSoft Demand Planning, the number of periods of historical demand used in the
Model Reset process. The value can be used to exclude older, possibly unrepresentative
historical demand data from model Optimization.
Effective Sequence
A system-generated number assigned to distinguish between two job entries with the same
effective date.
Effective Tax Rate
The ratio of income tax paid over gross income, showing the percentage of income actually
paid in taxes.
Effectivity Date
The date on which a component can be added or substituted in production, typically specified
on an item's bill of material.
GLOSSARY
70
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
EIS (Executive Information System)
An EIS is a workstation-based analysis and reporting system for executives. An EIS provides
a higher-level view of the data than a DSS, and typically requires less knowledge about the
underlying transactional systems. OLAP tools provide a powerful EIS.
Elapsed Schedule
A method of scheduling a time reporter’s time that is based on TRC and duration. This
method can be used for scheduling of elapsed time reporters (see Scheduling.)
Elapsed Time
Reporting non-clock time in increments of hours or partial hours (see Managing Time /
Understanding Time Reporting).
Elapsed Time Service
A method of calculating a period of service that uses only the start and end dates of the period
to determine the amount of service. Hours worked or other measures of the actual work
performed during the period are not taken into account.
Electronic Certification System (ECS)
An automated Payment Voucher authorized by the Certifying Officer for use within the
Treasury Department, Financial Management Service's financial system. PeopleSoft provides
a method to record and generate data files for on- and off-cycle processed payments.
Element
In PeopleSoft Global Payroll, an element refers to both primary elements and supporting
elements. Primary elements are comprised of earnings, deductions, absence entitlements, and
absence take elements. Supporting elements are element components that are combined to
create primary elements.
In PeopleSoft Enterprise Performance Management, elements are used to create a Profile. An
Element can be one or more columns of data in an Enterprise Warehouse table, associated
with a single dimension (for example, Customer, Product, Department, or Channel). An
Element can also be KPI, Population, subscription data from a third party, preexisting Profiles,
and data mining scores.
Element Group
Element Group identifies a group of elements to provide eligibility. You can then use this as a
notational shortcut—instead of having to list each element, you can use the element group
name. Element Group’s expedite the process of manipulating earnings and deductions.
Element Name
Name assigned by the user for data fields, rules, formulas, and tables. For example, the names
you give to new rules, elements, or objects.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
71
GLOSSARY
Element Segment
When an element changes mid-period, requiring the affected element (and perhaps a subset of
other elements) to be calculated multiple times on either side of the date on which the change
takes place, element segmentation is used. Unlike period segmentation, the system segments
only the elements you select, and creates separate result columns only for the specified
elements. In element segmentation, there is only one gross-to-net result set.
Eligibility Group
Eligibility groups define the possible earnings, deduction, absence entitlement, and absence
take elements that a payee might be eligible to receive. This enables you to group payees so as
to assign eligibility for certain pay elements.
Eligibility Rule
PeopleSoft Benefits Administration uses eligibility rules during Benefits Administration
processing to determine which benefit programs and options an employee is eligible for.
Eligibility rules are closely associated with event rules: they determine what options an
employee can have, while event rules determine which of those options an employee will
actually be able to choose.
Elimination Set
See Consolidations-Elimination Set.
Email Template
Pre-defined parameters that establish automatic email generation during budget submittal,
rejection, publishing, and/or targeting.
Employee
An individual employed by an organization and administered as an employee in the
PeopleSoft Human Resources system.
Employee Accounts
The PeopleSoft Pension Administration function that tracks employee contributions to a
pension plan.
Employee ID
A unique identification code for an individual associated with your organization.
Employee Paid Benefit
The portion of a pension benefit funded by the employee’s own contributions to the pension
plan. Also, the PeopleSoft Pension Administration function that determines this amount.
GLOSSARY
72
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Employee Profile
This PeopleSoft Activity-Based Management feature enables time and labor information to be
part of an analysis.
Employee Stock Purchase Plan
A type of statutory stock option plan through which employers grant options to their
employees in order to provide them with additional forms of compensation.
Employee Survey
In PeopleSoft Workforce Analytics, a method for capturing information about the activities
performed by a given employee as well as the amount of time they spend performing each
activity to perform activity-based management.
Employee Survey Report
The Employee Survey Report is an annual regulatory report that the French government
requires from employers with more than 200 employees. In French it is called "Le Bilan
Social". The report is communicated to both labor unions and the government. It provides a
snapshot view of the company over the past 3 years for about 200 indicators.
Employee Training Cost
Amount budgeted to pay for students’ salaries while on training courses.
Employer Identification Number (EIN)
In the United States a company is typically defined as a business enterprise that has a unique
federal Employer Identification Number (EIN) for payroll tax reporting purposes.
Employer’s Liability Insurance Associations (Berufsgenossenschaften)
Social Insurance in Germany is maintained and administered by private organizations that act
as employer’s liability insurance associations. Employers pay out premiums to these
associations, who administer and pay out funds to workers who are injured on the job.
Employment Cost Index (ECI) Adjustment
Annual increase to wages established/permitted by statute.
Employment Equity Computerized Reporting System (EECRS)
Canadian companies are required to report to the Federal Government on employment equity.
PeopleSoft Human Resources contains the Canadian Employment Equity report (PER101CN),
which creates a data interface file to the federal government’s Employment Equity
Computerized Reporting System (EECRS).
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
73
GLOSSARY
Employment Record Number (EMPL RCD#)
A field in PeopleSoft Human Resources Management Systems and PeopleSoft Workforce
Analytics that indicates an employee has multiple job records in the system. A numeric value
(0, 1, 2) is assigned to each job as a way to uniquely identify that job record.
Encumbrance
A claim against funds. It is a projection of future expenses based on the situation, as we know
it today. Encumbering funds is not the same as spending them or even guaranteeing that you
will spend them. It just means that if the situation as it exists today does not change, you will
spend all of those funds by the end of the fiscal year.
Engineering Bill of Material (EBOM)
A listing of all the parts, raw materials, and subassemblies that form the basis of all item and
product structures. EBOMs differ from MBOMs (Manufacturing Bills of Material) in that
they are not visible within Production Planning or Production Management and are isolated
from Manufacturing.
Engineering Change Order (ECO)
A revision to a blueprint or design, released by engineering to modify or correct a part and/or
bill of material. PeopleSoft Engineering uses ECOs to manage and document required
assembly and component changes.
Engineering Change Request (ECR)
A document that allows you to request manufacturing process improvements and report
product defects directly to the engineering department. When workflow is enabled, ECRs can
also be routed for review and approval, after which they change into ECOs.
Engineering Cost Version
The process of generating cost versions for new and modified configurations based on
engineering bills of material (EBOM) and costing data.
Engineering Workbench
An engineering environment, separate from production, consisting of engineering bills of
material (EBOM), engineering change requests, engineering change orders, EBOM cost rollup capability, online BOM comparisons, and seamless integration to a document management
vault.
Engineering Workbench
An engineering environment, separate from production, consisting of engineering bills of
material (EBOM), engineering routings, engineering change requests, engineering change
orders, EBOM cost roll-up capability, online BOM comparisons, and seamless integration to a
document management vault.
GLOSSARY
74
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Enterprise
In PeopleSoft Time and Labor, all of the business units of the installation site.
Enterprise Performance Management (EPM)
See PeopleSoft Enterprise Performance Management
Enterprise Portal
The PeopleSoft Enterprise Portal is a separate product offering purchased independently of
any other PeopleSoft applications. It can be used with or without any PeopleSoft application.
It can be used as a standalone corporate portal that does not access PeopleSoft data at all.
Enterprise Resource Planning (ERP)
The encompassing term for all the transaction-oriented database applications an organization
deploys across it’s business enterprise. The term includes financial, manufacturing and supply
chain, human resources, and payroll applications, among others.
Enterprise Warehouse (EW)
See PeopleSoft Enterprise Warehouse
Entry Authority
Authorization granted by employees to specific user IDs for entering expense data on their
behalf.
Entry Currency
The currency used to enter budget data.
Entry Event
An automated process that generates multiple debits and credits resulting from single
transactions, to produce standard supplemental accounting entries.
Entry Event Code
Designation of an Entry Event; an identifier or label.
Entry Event Generator
A mechanism that generates standard, supplemental accounting entries based on Entry Event
codes.
Entry Event Process
An accounting transaction. Entry Event processes combine to form Entry Events. For
example, requisition posting is a Purchasing process, and cash clearing is a Payables process.
Each process can involve one or several Entry Event Steps.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
75
GLOSSARY
Entry Event Step
Part of an accounting transaction. For example, the BUDG process includes these steps,
among others: prepare allotment budgets, prepare organization budgets, and prepare revenue
estimates. Entry Event steps combine to form Entry Event processes.
Entry On Duty Date (EOD)
Date that indicates when an employee started to work at his/her current agency.
Entry Type
Any activity that creates or updates an item.
EPM (Enterprise Performance Management)
See PeopleSoft Enterprise Performance Management
Equal Employment Opportunity Commission (EEOC)
In the United States the EEOC requires that most companies file one or more reports from a
series named EEO-1 through EEO-9. These reports include counts by federal employment
categories of male and female employees in certain ethnic groups.
Equitization
A process that enables parent companies to calculate the net income of subsidiaries on a
monthly basis and adjust that amount to increase the investment amount and equity income
amount before performing consolidations. For organizations with complicated
parent/subsidiary business unit relationships, this automated process reduces the process time
and reduces the possibility for errors.
Equity Increase
In PeopleSoft Workforce Analytics, Equity Increases are base pay increases granted to bring
an employee’s pay up to some internally specified standard for your organization.
Equivalent Standard Deviation
In PeopleSoft Demand Planning, a Standard Deviation developed during the Model Reset
process that enables you to compare standard deviations from different models. The deviation
is calculated by multiplying the Model Equivalency Factors defined on the Control Group
by the standard deviation.
ERISA (Employee Retirement Income Security Act of 1974)
The U.S. Federal legislation enacted to prevent abuses of employee pension rights by
employers.
GLOSSARY
76
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Error Exception
A transaction that is stopped because the budget limits would be exceeded if it continued. For
the transaction to proceed, action must be taken, such as canceling or reducing the transaction
amount, increasing the budget amount, overriding the budget limits, or transferring available
funds from another budget.
Error Ratio
The ratio of the statistical Standard Deviation to the base component that gives an indication
of the accuracy of the forecast. The ratio is presented in the PeopleSoft Demand Planning
Audit and Accuracy Review and is calculated during the Forecast Calculation Process.
Estimated Gross
Estimated labor cost associated with reported time (see Managing Time, Understanding time
Reporting Codes).
Estimated Shipments
A group of shipment schedules used to manage sales order requested shipment data and actual
shipment data. Used in conjunction with weight and volume pricing and freight charge
calculations.
Ethnic Code
The Federal Office of Management and Budget (OMB) racial and ethnic census categories
used for classifying individuals in U.S. Government reports.
ETL (Extract-Transform-Load)
See Extract-Transform-Load.
ETL maps
ETL maps provide rules for importing your source data to the data warehouse tables.
Evaluated Receipts Settlement (ERS)
A PeopleSoft Payables feature that matches receipts against purchase orders and generates
vouchers without requiring an invoice.
Evaluations Periods
In PeopleSoft Demand Planning, indicates the number of future periods to use for the
calculation of forecast errors. For example, if the number of evaluation periods is two, then
the forecast error in April 2001 (after posting demand for April) would be determined by
comparing the actual demand for April and the April forecast generated in February 2001.
Evaluation periods are set separately for each view.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
77
GLOSSARY
Event
Events are predefined points either in the Application Processor flow or in the program flow.
As each point is encountered, the event fires on each component, triggering any PeopleCode
program associated with that component and that event. Examples of events are FieldChange,
SavePreChange, OnRouteSubscription, and so on.
Event
Occurrence or happening.
Event Class
An event or type of event that results in a change of benefits eligibility for an employee or
dependent. Event classes are prominently used in COBRA and Benefits Administration
processing.
Event Maintenance
The process that enables you to manage ongoing enrollments during a plan year. Changes
involving maintenance include new hires and re-hires, terminations, family status changes,
and changes to benefits eligibility.
Event Rule
Used by PeopleSoft Benefits Administration to determine how events are processed by the
system. Event rules look at the benefit plan options an employee is eligible for and determine
which options the employee can actually choose. Event rules are closely associated with
eligibility rules but it is important to note that they are not the same. Event rules should not be
used to determine eligibility.
Event Trigger
You use triggers to tell the system that when a change takes place to certain data (an event), it
should perform an action automatically. When the event occurs, the system writes a line to a
trigger table. Then when it’s time for the action, the system reads the data from the trigger
table and performs the appropriate action.
EW (Enterprise Warehouse)
See PeopleSoft Enterprise Warehouse.
See also PeopleSoft Enterprise Performance Management (EPM).
Expected Losses
In the financial services industry, the amount the institution predicts it will lose in portfolio
value. Loan loss reserves are set aside to cover the expected losses.
GLOSSARY
78
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Excepted Service
As defined by 5 USC 2103, the Excepted Service consists of those civil service positions that
are not in the competitive service or Senior Executive Service.
Exception
User or system delivered, defined conditions applied to scheduled, reported or payable time
that require audit or review (see Time Management)
Exception Rules
A rule (s) that is applied to scheduled, reported time, and payable time in order to determine
conditions which require audit or review (see Time Administration).
Exception Severity
The degree of importance associated with an exception. For example, in exception which is a
result of an employee clocking in late may have a Medium severity, while an exception which
is a result of an employee not clocking in has a High severity (see Time Management).
Exception Time Reporting
A method of time reporting where only differences to the schedule are provided (see Time
Reporting).
Excess Plan
A pension plan where the benefit formula provides an increased benefit for Final Average
Earnings above a specified integration level. This compensates for the fact that Social
Security benefits are based only on earnings up to a specified maximum.
Exchange Rate Variance
In PeopleSoft Cost Management, the change in currency exchange rate between the time the
item is received into inventory and vouchered in Accounts Payable.
In PeopleSoft Payables, a matching feature that compares the exchange rate on the purchase
order and the invoice and then copies any variance to PeopleSoft Inventory tables for analysis
and accounting purposes.
Exclusive Pricing
Supersedes all pricing structures in effect for customers and products, except Buying
Agreement, and enables you to drive pricing with a promotional structure. Exclusive pricing
can be set up for a specific time frame and associated with particular orders.
Executive Schedule (EX)
Compensation and pay plan used by the Executive Branch of the federal government.
Statutory pay limits are derived from several of the pay levels within this plan and imposed on
the General Schedule and other existing pay plans throughout the Federal government.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
79
GLOSSARY
Exercisable
The option shares that are available to the optionee to exercise.
Exercise
The transaction in which an individual purchases or “exercises” the right to purchase the
option shares. The IRS refers to the purchase of company stock in an employee stock
purchase plan as an exercise.
Exercise Date
The date on which an individual purchases underlying shares from and option grant or
transacts a simultaneous purchase and sale of underlying option shares through a cashless
exercise and collects option profit in cash or shares.
Exercise Price
The price per share required to exercise a stock option.
Exercise Proceeds
Cash, stock or other recognition received by a company as a result of option exercises,
including cash or stock paid by individuals to exercise options and cash company tax savings
from deducting non-statutory option profits at exercise.
Expense Location
Geographic area defined to enable the recording, tracking, and reporting of expense activity.
Expense Location Amount
Authorized spending defined for an expense type in a particular expense location and
currency.
Expense Location Group
Collection of expense locations based on a common classification such as state, country, or
continent.
Expense Type
Means of itemizing various kinds of business expenses. Examples are hotel, dinner, or ground
transportation.
Expense Type Edit
User-defined requirement that mandates input of additional data—such as an airline ticket
number or number of nights in a hotel—when an expense type is selected in an expense report.
GLOSSARY
80
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Expense Type Group
Expense types that are classified together for reporting and tracking.
Expensed Item
Non-inventory item which may represent software, manuals, documentation, or any item for
which no quantity on hand is maintained, but which can be specified on a bill of material
(BOM). Expensed items can only exist as components on a BOM and cannot have a BOM,
routing, or production area/item definition.
Expiration
The process by which the outstanding shares of an option cease to be exercisable, generally at
the end of the option term. The length of the option term and the date of expiration are
established in the Grant Agreement.
Expiration Date
In PeopleSoft Inventory, the date a lot exceeds its Shelf Life and is no longer acceptable for
fulfillment or consumption. (Expiration Date = Creation Date + Shelf Life)
Expiration Date
The last day of an option term in which the option is canceled and no longer exercisable.
Expiration Grace Period
When you enter a stock action allows the exercise of the already vested shares as of the action
date, the system will calculate the date these shares expire based on the grace period defined
on the Stock Action Rules page for that stock action. The system will automatically cancel
vested shares not exercised at the end of the expiration grace period.
Express Customer
A customer for whom the minimum necessary information is entered.
Expressions
Expressions enable you to create pseudo-columns made up of mathematical calculations based
on actual fields on a table. Since expressions are resolved at run-time, duplicate information is
not stored on the database.
Express Order
An order entry shortcut in PeopleSoft eStore and Mobile Order Management whereby the
customer populates the shopping cart and goes directly to the order summary to checkout,
bypassing any billing or shipment modification screens. Billing and shipping information
defaults in as previously entered.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
81
GLOSSARY
External Data
Data from external sources. For instance, in PeopleSoft Workforce Analytics, external data
may include third party salary surveys and benchmark metric surveys.
External Scheme
In the United Kingdom an External Scheme is a vocational training, education and job
placement program involving an employee, an employer and the government.
External System
Any system that is not directly compiled with the PeopleTools servers.
Extra Time
Any hours worked outside of an employee's normal (scheduled/shift) hours or days. Extra
time may be scheduled in advance of when it is worked, and may be subject to special
compensation rules. It may be treated differently than standard time for purposes of Benefit
Entitlement and Administration.
Extraction
A reusable query that specifies what information should be retrieved from the Quality
database.
Extract-Transform-Load (ETL)
The extraction and transport of data from one server to another remote server. In PeopleSoft
budgeting ETL specifically refers to the process by which financial and human resource data
is extracted from PeopleSoft Financials and HRMS and transferred to the PeopleSoft
Enterprise Warehouse which PeopleSoft Budgeting uses to access and record data
transactions. Within PeopleSoft Enterprise Warehouse, data migration typically refers to
information moved from outside sources into the Operational Data Store tables.
Extrinsic Rewards
Tangible rewards that can be given to the individual. Typically categorized as financial and
non-financial rewards. Financial rewards would include direct compensation, indirect
compensation and deferred compensation. Non-financial rewards are provided to the
individually and viewed as a benefit by the individual based on the culture of the organization
such as the size or location of one’s office.
In PeopleSoft Workforce Analytics, tangible rewards given to an individual. Typically
categorized as financial and non-financial rewards. Financial rewards would include direct
compensation, indirect compensation and deferred compensation. Non-financial rewards are
provided to the individually and viewed as a benefit by the individual based on the culture of
the organization such as the size or location of one’s office.
GLOSSARY
82
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
F
Fact
Facts are numeric data values from fields from a source database as well as an analytic
application. A fact can be anything you want to measure your business by, for example,
revenue, actual, budget data, or sales numbers. A fact is stored on a fact table.
Fact Table
A fact table is where facts are stored in the PeopleSoft Enterprise Warehouse.
Fair Labor Standards Act (FLSA)
A federal regulation governing several time and labor issues. FLSA Overtime requires that all
nonexempt employees be paid at a rate of time-and-one-half for all hours over 40 physically
worked during a workweek. This requirement may be superseded by state or local laws when
the lesser law is to the greater benefit of the employee, or by union contract. An FSLA
Workweek is a permanently established, regular workweek for a group of employees.
Fair Market Value (FMV)
The price of a company stock based on the current market value as determined by supply and
demand, or a valuation method. The stock market sets the fair market value for a public
company. For a private company the fair market value is more subjective, but typically
determined by financial factors or set by an outside valuation company.
Fair Market Value Tracking Methods
Methods used to track and report trading activity on various exchanges (i.e. NYSE, AMEX,
NASDAQ, etc…).
Family Medical Leave Act (FMLA)
A federal regulation that protects health benefits and job restoration for employees who must
take a leave from work to care for themselves or family members. FMLA regulations contain
provisions regarding employer coverage, employee eligibility and entitlement, notice and
certification, continuation of health benefits, and job restoration. PeopleSoft Benefits
applications offer FMLA Plans that help employers and employees determine FMLA
eligibility and schedule and track FMLA leave requests.
Federal Employee Group Life Insurance Program (FEGLI)
Generally, if the employee has Federal retirement coverage or is on a temporary appointment
exceeding one year, he/she is eligible to participate in the FEGLI program. Once eligible,
he/she is covered automatically for Basic Life Insurance and premiums will be deducted from
gross salary unless coverage is waived within the first period of eligibility. The program
offers Basic Insurance coverage and three types of optional coverage: Option A (Standard),
Option B (Additional), and Option C (Family).
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
83
GLOSSARY
Federal Employee Pay Comparability Act (FEPCA)
This law provides a structure and methodology to determine and authorize locality-based pay
adjustments to Federal employees in order to elevate their basic pay to be commensurate with
private sector employees working in the same occupations in the same geographic localities.
It also includes a feature to authorize agencies to make advance salary payments to attract
candidates for open positions which have consistently been hard-to-fill in certain geographic
areas.
Federal Employees' Compensation Act (FECA)
This law provides compensation and medical benefits to civilian employees of the United
States for disability due to personal injury or disease sustained while in the performance of
duty. A feature of this law provides for the continuation of pay (COP) without charge to leave
for up to 45 calendar days due to disability and/or medical treatment following a traumatic
injury. Employees file claims with the U.S. Department of Labor, Office of Worker's
Compensation, which adjudicates the claims and compensates the employing agencies for the
employee's pay and benefits during the claim period.
Federal Employees Health Benefits (FEHB)
Generally, the employee is entitled to coverage by the FEHB program if appointed to a
position with Federal retirement coverage or has been on the rolls on a temporary appointment
for more than one year. The Federal employer shares the cost of the premium (about 75%);
actual premiums depend on the plan selected. If under a temporary appointment, the
employee pays both the employer and employee shares. If the position is part-time, the
employee pays the employee share and a portion of the employer’s share.
Federal Employees Retirement System (FERS)
A retirement plan available to employees of the federal government. FERS covers all
employees appointed to a position in the federal government after January 1, 1987. Coverage
includes Social Security, a basic annuity plan, and a TSP.
Federal Employer Identification Number (EIN)
Used to identify the tax accounts of businesses. Businesses, which have employees or operate
business as a partnership or corporation, must obtain an EIN.
Federal Insurance Compensation Act (FICA)
Employee and employer contributions to Social Security.
Federal Reserve Transit Number
A unique identifier for U.S.-based banks, allowing banks to transfer funds within the Federal
Reserve system.
GLOSSARY
84
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Feeder Line
A type of production line replenishment used in PeopleSoft Flow Production. If you are using
feeder line replenishment, smaller production lines create subassemblies that feed directly to
your production line.
FEGLI Living Benefits Act
Beginning 7/25/95, a Federal employee who is terminally ill may elect to receive a lump-sum
payment equal to the full amount of basic life insurance only, or a limited portion designated
in multiples of $1000. An election to receive this benefit is irrevocable; the individual is
considered terminally ill if his /her life expectancy is 9 months or less.
FICA (Federal Insurance Contributions Act)
FICA consists of both a Social Security (retirement) payroll tax and a Medicare (hospital
insurance) tax. The tax is levied on employers, employees, and certain self-employed
individuals.
Fictitious Calculations
Fictitious calculation rules perform temporary calculations. A fictitious calculation is a subcalculation run during a normal calculation to determine a net that would have been computed
if certain parameters were used. This result is then used for further processing in the normal
calculation. A fictitious calculation is always started from inside a normal calculation, run for
one payee, and run for a specified set of periods.
FIFO (First In First Out)
Method used by companies to record Disqualifying Disposition Income. If a company uses
this method they record the optionees disposition of shares by attributing the shares to the
earliest exercise, purchase or release dates for which shares remain available for sale.
Fill-In Employment
Employment held by persons during the time period after leaving their regular occupation in
anticipation of, but before entering, military service.
Filter
A filter creates a subset of information. Filters are used in templates to limit your information
from a pick list of attribute values.
Final Average Earnings (FAE)
The PeopleSoft Pension Administration function that averages earnings from a specified
period of an employee’s career. The result is used as a component of the pension benefit
formula.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
85
GLOSSARY
Final Forecast
The final forecast is the prorated version of the adjusted forecast, summarized to all levels of
the product hierarchy. This is the best-guess version of the forecast that is used to make all
decisions dependent on the forecast.
Final Table Merge Engine
Final Table Merge Engine is used by the PeopleSoft Enterprise Warehouse; it moves enriched
data from one table into another. When you run a job in a jobstream, the immediate results are
stored in temporary tables. At the end of the jobstream, the Merge Engine runs and merges
the output temporary tables into the final tables, where processing can continue.
Financial Accounting
The accounting for a business entity’s assets, liabilities, revenues, and expenses to determine
its net worth and to produce financial statements. Within Generally Accepted Accounting
Principles, a business has some latitude as to when and how to record its financial
transactions, as long as it continues to meet its legal and regulatory requirements. A business’
financial accounting requirements are not necessarily the same as its cost accounting
requirements. The one should not be mistaken for the other (i.e. the extent to which a
company’s financial accounting system meets its cost accounting needs depends on how it has
chosen to describe its chart of accounts and the level at which it has chosen to record financial
transactions.
Financial Instrument
In the financial services industry, a specific product or service sold by a financial institution to
its customers. In terms of the reporting hierarchy, a product falls under a ledger account,
while an instrument falls under a product. A product may be treated like a generic description
or category, while an instrument is a specific instance of a category.
Financial Performance Measures (FPM)
For the financial services industry, the Financial Performance Measures program performs
calculations on financial instruments based on the rules defined in the Financial Calculation
Rules module, and using input from the Cash Flow Generator, Stratification engine, Product
Pricing, and Curve Generator. Its calculations include: measures of duration, option-adjusted
spread and option-adjusted cost for PeopleSoft Funds Transfer Pricing, and Monte Carlo
simulation for PeopleSoft Asset Liability Management.
Financial Product
In the financial services industry, a product or service sold by a financial institution to its
customers. In terms of the reporting hierarchy, a product falls under a ledger account, while
an instrument falls under a product. A product may be treated like a generic description or
category, while an instrument is a specific instance of a category.
GLOSSARY
86
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Financial Services Instrument
In the financial services industry, products created by financial institutions and sold to retail
customers. Product prices and interest rates are set by the financial institutions and take into
account its customers’ behavioral models.
Financial Statement Simulation
A facility within Planning & Simulation which establishes rules for simulating future period,
or pro-forma, financial statements. The user defines corporate financial policies, such as
corporate tax rates, dividend distribution frequency, and force balancing rules, which are then
applied to cash flows for a given future accounting period. The Financial Statement Simulator
engine drives costs and revenues to accounts on PF_LEDGER_F00 via a scenario.
Financials Warehouse
See Warehouses.
First Year Amount
See 1st Year Amount.
Fixed Basis
The basis option enables you to create the data for the Basis online, as part of the rule. Fixed
Basis is used with the Allocation Manager only. It is available with all methods except when
Period-Based Allocation is being used. The Fixed Basis is a predetermined table that can be
populated online.
Fixed Offering
The offering type is fixed when the end date of each offering is the same for all employees
regardless of the employee’s grant dates.
Fixed Percentage
A fixed percentage value. The source pool amount will be split based on this percentage to get
the target amount. Used with the Allocation Manager.
Fixed Period Requirements
In PeopleSoft Enterprise Planning and Production Planning, a lot-sizing technique that sets the
order quantity to the demand for a given length of time.
Fixed Picking Bin
A dedicated picking location for an inventory item. Fixed picking bins are replenished from
bulk locations when the available quantity falls below the optimal quantity.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
87
GLOSSARY
Fixed Plan
A stock purchase offering period where the ending offering date will be the same as the
purchase date. Eligible employees will always purchase stock on the specific purchase dates
and by the purchase rules you define.
Fixed Quantity
An Inventory Policy method that defines a fixed amount of an item to be ordered to meet
replenishment needs. This method can be selected as an inventory policy for order quantity,
safety stock, Reorder Point, and minimum and maximum parameters.
Fixed Source
The fixed source option enables you to create the data for the Source online, as part of the
rule. Fixed Source is used with the Allocation Manager only. It is available with all methods
except when Period-Based Allocation is being used. The Fixed Source is a predetermined
table that can be populated online.
Flexible Credit
Any credit associated with a given benefits program, plan, or type of coverage. Credits based
on an entire program can be applied toward the benefit costs however the employee chooses.
Flexible Hours
Hours during the workday, workweek or pay period during which a time reporter covered by a
flexible work schedule may choose to vary his times of arrival and departure from the
worksite (see Scheduling)
Flexible Spending Account (FSA)
An account to which an employee and (optionally) an employer pledge an annual amount for a
plan year. The employee then submits claims for authorized expenses.
Flexible TimeSpan
A user-defined period into which costs can be collected. Flexible TimeSpans can be as long
or as short as you like—covering multiple years or a single day. The main purpose of Flexible
TimeSpans is to assist you in analyzing costs.
Flexible Work Schedule
A method of scheduling a time reporter’s time that is based on a range of flex hours of start
and stop times and core work hours. This method can be used for scheduling clock and
elapsed time reporters (see Scheduling)
FLSA Status
A PeopleSoft Human Resources term that is used to indicate whether a job is exempt or
nonexempt according to the Fair Labor Standards Act. All employees associated with a
GLOSSARY
88
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
particular job will receive that job’s FLSA Status. FLSA Status is an eligibility determination
factor for PeopleSoft Benefits Administration.
Forecast Attribution
A FSI (financial services industry) transformation process through which forecasted product
originations are pooled and run through the cash flow engine for future periods.
Forecast Calculation Process
In PeopleSoft Demand Planning, the process by which a Statistical Forecast is generated for
each item at each level of the view. When a Forecast Item is set to recalculate, the system
tries several forecast calculation methods and picks the one with the least amount of error.
This process also makes adjustments for promotions and filters for abnormal demand.
Forecast Definition
Forecast definitions are a set of forecasting rules that generally govern multiple forecasts
distinguished by key properties such as products, customers, channels, and so forth.
Forecast Element
Each forecast within a single definition is called a Forecast Element.
Forecast Fulfillment
In PeopleSoft Demand Planning, a process used to manage forecasted demand over a period of
time. The process makes it possible to divide the total forecast demand into portions so that
certain portions can be met, even if the total forecast cannot be met entirely.
Forecast Item
In PeopleSoft Demand Planning, a logical item used as the basis to forecast demand. The
components of a forecast item key are defined for each level in a forecast view.
Forecast Level
See Level.
Forecast Period
A period in time as defined by the calendar for which data is processed through the PeopleSoft
Demand Planning model.
Forecast Start Period/Year
Determines the most recent period for which demand data is available for a forecast view.
This period can also be described as the last actual demand period to have had an impact on
the forecast.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
89
GLOSSARY
Forecast View
See View.
Foreign Education
Education acquired outside of any state of the U.S., the District of Columbia, the
Commonwealth of Puerto Rico, a Trust Territory of the Pacific Islands, or any territory or
possession of the U.S.
Form 10-K
A form used for annual reports pursuant to Section 13 or 15(d) of the Securities Exchange Act
of 1934 for which no other form is prescribed.
Form 10-Q
A form used for quarterly reports under Section 13 or 15(d) of the Securities Exchange Act of
1934, filed pursuant to Rules 13a-13 or Rule 15d-13. This report, which public companies are
required to file quarterly with the SEC, provides unaudited financial information and other
selected material.
Form 5500 Participant Count Extract
A PeopleSoft Pension Administration data extract containing data that a plan administrator
needs in order to complete IRS Form 5500, used to report on the number of plan participants.
Form S-8
A form used to register securities offered by a reporting company under its employee benefits
plans, including stock option plans. Also called the Registration Statement under the
Securities Act of 1933.
Form W-2
A form used by employers to provide workers with a statement of wages, tips and other
compensation from the previous year. This form, distributed employees by January 31 of each
year, reflects state and federal taxes, social security, Medicare wages, and tips withheld.
Formula
Element which enables you to define your own formulas for use—gives further flexibility to
define complex organizational needs.
Formula Plan
This compensation distribution plan type is based on a pay out rule, as the pay out rule is
defined. The pay out rule can be based on a flat amount, a percentage, or a data element.
Whereas a Target Plan distributes pay out based on a comparison of a performance measure
against a target, in a Formula Plan the pay out is based just on the pay out rule.
GLOSSARY
90
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
French Professional Elections
French companies employing a certain number of employees must hold elections for selecting
personnel representatives (DГ©lГ©guГ©s du personnel), and members of the Work Council
(ComitГ© d'Enterprise).
Frozen Rate
A rate that is applied to allocate resources to activities in place of the actual, budgeted and
capacity rates calculated by the Activity-Based Management (ABM) Engine.
FTE (Full Time Equivalency)
FTE is the percent of full time the employee should normally work in this job. Full time is
defined by the Standard Hours specified in either the Salary Plan Table or the Default
Standard Hours specified in the Installation Table.
FTP (Funds Transfer Pricing) Adjustments
Adjustments made to the PeopleSoft Funds Transfer Pricing (FTP) base rate, for such factors
as geographic premiums, liquidity premiums, embedded options, or incentive programs.
FTP (Funds Transfer Pricing) Base Rate
In PeopleSoft Funds Transfer Pricing (FTP), this refers to the basic charge or credit that is
applied to a ledger account, a product, or an off-balance sheet position.
FTP (Funds Transfer Pricing)
See PeopleSoft Funds Transfer Pricing.
Full-Time Equivalent
See FTE.
Function
A category of pension calculation. PeopleSoft Pension Administration divides a pension
calculation into nineteen “core functions” such as Service, Final Average Earnings, and
Benefit Formula.
Function Result
The calculation rules for any of PeopleSoft Pension Administration’s nineteen core functions.
These rules match Definitions—the specific parameters for the function—to the Groups of
employees that use that particular definition. Function Result also refers to the value produced
by the rules.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
91
GLOSSARY
Fund ID
In the financial services industry, Fund ID is a lookup code used to track investment funds
associated with a financial instrument or account. Provided primarily by the financial analytic
applications to track investment funds for insurance policies.
Funds Transfer Pricing (FTP)
See PeopleSoft Funds Transfer Pricing.
Fungible
This term describes a resource used for multiple activities.
Future Period
Any pay period which is not current and whose close date hasn’t passed (see Time Reporting).
Future Periods
The number of periods of future forecasts maintained by the PeopleSoft Demand Planning
system.
G
Gang Reporting
See Crew Reporting.
General Deduction
Any non-benefit deduction. Examples include charitable deductions, union dues, parking,
garnishments, and bonds. General Deductions are calculated from the General Deduction
Table; Benefit Deductions draw on one of the benefits tables.
General Ledger Distribution
The process and guidelines by which accounting information is transferred from your
PeopleSoft Receivables or Deduction Management system to a general ledger system.
General Schedule (GS)
Compensation and pay plan used by the Executive Branch of the federal government.
Generation Control
Generation control elements allow you to indicate to the system whether to process an element
based upon criteria you define. There are six parameters that control this function and
comprise the definition of the generation control element—HR Status, HR Action/Reason,
Segment Status, Frequency, Formula, and Run Types.
GLOSSARY
92
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Generic Conversion Factor
A conversion factor that applies universally between two units of measure. The factor is used
in the conversions between levels of PeopleSoft Demand Planning Forecast Items and
Inventory Planning Policy Item.
Generic Process Type
This term applies to Process Scheduler. Process types are identified by a generic process type.
For example, the generic process type "SQR" includes all SQR process types, such as "SQR
Process," "SQR Report," and so on.
Geo RSZ Code
This code is for Belgian employers to track the geographical location for RSZ codes.
Geographic Location Code
In Canada this code is prescribed by the government and refers to the location a business is in.
Giveaway Adjustment Type
In PeopleSoft Order Management, the price break tables are set up to indicate what product
the user receives as a free premium based on defined quantities or prices. The giveaway item
does not have to be the same product that the customer is purchasing. For instance, you may
set up a price break that indicates that a purchase of 100 widgets entitles the customer to one
or more free T-shirts. The system automatically adds an order line for the free item.
Giveaways cannot be applied to the total order.
Goals Matrix
In PeopleSoft Workforce Analytics, a matrix used to create calculation rules for group or
employee performance goals. You can combine and standardize multiple performance goals
into a single, weighted, goal score, against which actual performance is compared. A Goals
Matrix can be used to in conjunction with a pay out distribution plan called a Target Plan.
Grace Period
A period that is a number of hours or minutes before or after a scheduled punch where a time
reporter’s punch is accepted. For Stock Administration, the period of time an optionee has to
exercise an option after termination and before the option expires.
Grade
A range of pay in a graduated scale that includes positions of different occupational groups.
The work performed should be equivalent as to the level of difficulty and responsibility and
the level of qualification requirements of the work. The levels are established and designated
within a specific pay plan by law or regulation.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
93
GLOSSARY
Graduate Education
Successfully completed education in a graduate program for which a bachelor's or higher
degree is normally required for admission. To be creditable, such education must show
evidence of progress through a set curriculum, i.e., it is part of a program leading to a master's
or higher degree, and not education consisting of undergraduate and/or continuing education
courses that do not lead to an advanced degree.
Grandfathered Benefit
A benefit that an employee was entitled to prior to a change in the plan and that defines the
employee’s new minimum level of benefits. The change might be caused by a plan merger,
new legislation, or a plan amendment.
Grant
A contractual right giving an individual the option to purchase a specified number of shares of
stock through an Equity Compensation Plan. Also known as an option.
Grant Agreement
The legal document issued by a company defining the number of shares granted, grant price,
vesting schedule and other terms and conditions of the stock option or stock award.
Grant Date
The date the individual begins participating in a stock purchase offering. The date on which
an option or other award is granted. The date the company enters into the grant agreement.
The underlying stock’s fair market value on this date generally derives the option price.
Grant Price
The price per share at which the stock option was granted. This is the price per share the
individual must pay when exercising the option.
Gross Salary
The sum of an employee’s salary and earnings defined as part of gross salary. The gross
salary is used to calculate budget amounts for benefit plans defined as a percentage of an
employee’s salary.
Gross-up
The process used to calculate taxes and resultant gross pay from a check for an exact net
amount.
Group
In PeopleSoft Billing, a specific term for a posting entity composed of one or more
transactions (items, deposits, payments, transfers, matches, or write-offs).
GLOSSARY
94
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Group
Any set of records associated under a single name or variable in order to run various
calculations in PeopleSoft Business Processes. In Time and Labor, for example, employees
are placed in groups for time reporting purposes, while in Administer Variable Compensation,
groups identify which employees are eligible for what forms of compensation. In PeopleSoft
Pension Administration, you’ll use Custom Statements to define criteria for grouping
employees, then by associating calculation rules (Definitions) with specific Groups, you can
vary rules for different classes of employees.
Group Asset
A financial asset with no cost information. It is used to depreciate the sum of the costs of its
associated group member assets.
Group Asset Depreciation
The depreciation of a group asset calculated using an average service life set by a local
regulatory agency and a calculated group depreciation rate.
Group Coverage (Or Generic) Qualification Standards
Standards prescribed for groups of occupational series that have a common pattern of
education, experience, and/or other requirements.
Group Member Asset
A financial asset with cost information. Cost information for all group members of a group
asset is summed up to the group asset level, where depreciation is calculated.
Group Security
The ability to grant or deny access to groups. You can set up group security by Group ID or by
user ID.
Group Security [Time and Labor]
The ability to grant access to employee time, by providing security through Time and Labor’s
groups functionality. For example, you might want your employees to only access their own
records, or allow your supervisors who handle all of the time input for have access to specific
groups. You can restrict the user from accessing everyone, or allow the user to be able to
access only their own records, or only a specific group. This feature also provides the ability
for employees to report their own time.
Group Type
An indicator of the activity that created the billing group: billing, maintenance, payment,
transfers, or unposted.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
95
GLOSSARY
H
Handicap Code
A code that identifies a type of physical or mental impairment that substantially limits one or
more of an employee's major life activities.
Hazard/Disposal Code
An inventory item group sharing a disposal routine.
Headcount
The number of people represented by a given Employee Survey record in the PeopleSoft
Enterprise Performance Management product line.
Health and Safety Executive (HSE)
Health and Safety reporting for your UK operations is sent to the local office of the HSE per
the requirements of the RIDDOR (Reporting of Injuries, Diseases, and Dangerous
Occurrences Regulations).
Health Benefits Code
An alpha/numeric code that identifies each Health Benefit plan.
Health Benefits Effective Date
Date the health benefit plan goes into effect or the effective date of cancellation.
Hierarchy
Hierarchy refers to the relationship between the levels in a dimension.
Highly Compensated Employee (HCE)
An IRS employee category applied to employees who are considered “highly compensated”
according to a federally set standard. This distinction is used for the purposes of
nondiscrimination tests, to determine that Section 401 and Section 129 plans do not
discriminate in favor of highly compensated employees.
HIPAA
The Health Insurance Portability and Accountability Act of 1996. PeopleSoft Benefits
applications enable you to comply with this act, which requires that employers provide
Certificates of Group Health Plan Coverage to employees who have their health coverage
terminated. This certificate lists group health coverage an employee had for the twelve month
period prior to the date coverage ended as a result of termination of coverage. The HIPAA
certificate will be used by subsequent health coverage carriers to evaluate pre-existing
condition clauses, if applicable.
GLOSSARY
96
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Historical Periods
In PeopleSoft Demand Planning, a component that indicates the maximum number of periods
of historical demand maintained for a Forecast Item within a Forecast View. Historical
periods must be a minimum of two years in order to support the development of seasonal
models based on an item’s demand history.
Historical Rules
An element used to set up rules that retrieve data from prior periods. Historical rules can be
used in formulas and fictitious calculations.
Historical Usage Calculation Method
In PeopleSoft Inventory Planning, a method that defines the set safety stock or minimum
inventory level. The usage is based on the review of historical demand over the number of
effective periods. The historical demand quantity is determined by one of four methods;
maximum possible usage, Lead Time, estimated daily or period use, and static values
calculations.
Hold Grade/Step
Grade/step the employee was in prior to receiving a temporary promotion.
Hold Last Equivalent Increase (LEI)
Date held by an employee for this event prior to receiving a temporary promotion. Necessary
in order to establish the WGI due date if returning to original grade/step.
Hold Position Description
The new position description number that is the result of a reclassification action prior to the
NOA being processed.
Hold Purchase
A flag that tells the system to keep this participant in the purchase process. The hold flag is
maintained at the contribution page.
Hold Within Grade Increase (WGI) Due Date
WGI due date prior to an employee receiving a temporary promotion.
Holding Period
Typically refers to the holding period required for ISO’s and Qualified Section 423 Purchase
Plans, to receive preferential tax treatment on a disposition of shares. See Disqualifying
Disposition.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
97
GLOSSARY
Hours Counting Service
A service calculation that uses actual or generated hours to determine the service credited to a
pension plan participant.
Hours Equivalence Service
A service calculation that uses hours to determine service, but that uses a set number of hours
per day, week, or other period worked rather than counting actual hours.
HR Action/Reason Category
A group of related job actions—for example, hire and rehire—treated similarly for pension
purposes in PeopleSoft Pension Administration.
HRMS Warehouse
See Warehouses.
I
Ignore Plan
Complex event processing feature of PeopleSoft Benefits Administration that enables the user
to designate plan types linked to a particular Event Rules/Event Classification combination as
being unaffected by Benefits Administration processing.
Ignore Violations
The ability to report over capacity violations but not to score or repair them during the
optimization process.
Imputed Income
Theoretical income that a company pays on behalf of an employee but the individual does not
actually receive. This “theoretical income” must be added to the employee’s gross wages. In
general, imputed income refers to the value of excess Group Term Life or Dependent Life
coverage.
In Punch
Indicates start of a shift.
In the Money Option
When the fair market value of the stock is greater than the grant price of an option.
GLOSSARY
98
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
INAIL code
In Italy, the INAIL code is used to classify jobs according to the level of risk associated with
the job and the related risk insurance required by the employer. INAIL codes are defined by
the employer.
Incentive Pay Plans
In PeopleSoft Workforce Analytics, pay plans that are formula-driven based on the expected
results defined at the beginning of a performance cycle. Incentive plans are designed for the
individual worker, or for group levels such as teams, business units, divisions, or companywide. Incentive plans are used for a variety of reasons; including cost control, alignment of
employee and shareholder interests, and increased focus on specific performance indicators.
Incentive Plans
Pay plans that are formula-driven based on the expected results defined at the beginning of a
performance cycle. Incentive plans can be designed for the individual worker or at group
levels such as teams, business units, divisions or company wide.
Incentive Stock Option (ISO)
For an option to be considered an Incentive Stock Option, it must have the following
characteristics:
•
The option must be granted pursuant to a plan which includes the aggregate number of
shares which may be issued under options and the employees (or class of employees)
eligible to receive options, and which is approved by the stockholders of the granting
corporation within 12 months before or after the date such plan is adopted;
•
The option must be granted within 10 years from the date such plan is adopted, or the
date such plan is approved by stockholders, whichever is earlier;
•
The option is not exercisable after the expiration of 10 years from the date such option
is granted;
•
The option price is not less than the fair market value of the stock at the time such
option is granted;
•
The option is not transferable by such individual otherwise than by will or the laws of
descent and distribution, and is exercisable, during his lifetime, only by him, and;
•
The optionee, at the time the option is granted, does not own stock possessing more
than 10% of the total combined voting power of all classes of stock of the employer
corporation or of its parent or subsidiary corporation.
Incomplete Punch
A punch that cannot be processed (i.e. missing employee ID, invalid date or time).
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
99
GLOSSARY
Incremental Budgeting
A budgeting option during budget development that uses prior year actual or budget values as
a basis and then applies a percentage that increments the base. PeopleSoft Budgeting-specific.
Incumbent
An employee currently assigned to a position.
Indirect Compensation
Typically involves non-cash types of compensation awarded to the individual in exchange for
their contribution to the organization. Common types of indirect pay include health and
welfare benefits (for example, medical, dental, vision, long-term disability, short-term
disability, unemployment insurance), payment for time not worked (for example, holiday,
vacation, sick), and employee services and perquisites (for example, club memberships,
parking, holiday gifts).
Indirect Cost
A cost that is assigned by management to an activity or a cost object. An example is the cost
of office space assigned to an activity.
Individual Occupational Requirements
Requirements, e.g., experience or education, for particular occupational series of positions
within a series and are used in conjunction with a group coverage (generic) standard.
Individual Retirement Record (IRR)
Used by the Office of Personnel Management (OPM) as the basic record for determining the
retirement benefits payable to separated federal employees and their survivors. Employees
covered by the CSRS retirement plan require SF-2806. Employees covered by the FERS
retirement plan require SF-3100. In addition, the SF-2806-1 and SF-3101 are used for
corrections to the IRR. See also Correction to IRR.
Inherit Control Group Policies
In PeopleSoft Inventory Planning, a feature that controls whether the policy for an item is set
explicitly or defaults from the associated Policy Control Group. A series of check boxes
enable you to define which policies to inherit.
Initial COBRA Events
The event which makes an individual eligible for COBRA coverage. Typical initial COBRA
events include loss of benefits eligibility due to termination, reduction in hours, retirement,
and military leave, as well as divorce, death of employee, and Medicare entitlement. See
COBRA and Secondary COBRA Events.
GLOSSARY
100
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
INSEE (National Institute for Statistical and Economical Studies) Codes
INSEE is an official statistics and economics organization in France. INSEE codes for your
French company's organizations are used in regulatory reporting.
INSEE PCS (Classification par CatГ©gorie Socio-Professionnelle) Code
Each PeopleSoft Human Resources French Jobcode is linked to a four-digit INSEE PCS, or
social/professional classification code.
In-Service Date
In PeopleSoft Asset Management, the date upon which an asset is placed in service. Inservice date is used in conjunction with an asset's prorate convention to determine Begin Depr
Date.
Inservice Placement
Includes a noncompetitive action in which a position is filled with a current or former
competitive service employee through promotion, reassignment, change to lower grade,
transfer, reinstatement, reemployment, or restorations. Inservice placement also includes
noncompetitive conversion f appointees whose Federal excepted positions are brought into the
competitive service under Title 5 CFR 316.702, and Department of Defense/Nonappropriated
Fund (DOD/NAF) and Coast Guard NAF employees whose positions are brought into the
competitive service.
Insider
An officer, director or principal shareholder of a publicly owned company and members of his
or her immediate family. This category may also include other employees of the company and
people who obtain nonpublic information about the company.
Insider Trading
When a person trades a security while in possession of material non-public information in
violation of a duty to withhold the information or refrain from trading. The securities law
broadly prohibits fraudulent activities of any kind in connection with the offer, purchase, or
sale of securities.
Instance
A row of data on the Positive Input table. Instances of positive input can be entered manually,
or can be system generated. They can also be received from other applications, such as
PeopleSoft Time and Labor.
Integration Level
The salary level in a defined benefit excess plan at which a higher benefit rate becomes
applicable. For example, the following formula uses a $10,000 integration level: 1% of Final
Average Earnings up to $10,000 plus 1.75% of Final Average Earnings over $10,000.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
101
GLOSSARY
Integration Template
A high-level template that defines the integration between PeopleSoft Projects and your other
financial applications. Each integration template you create defines a specific set of business
units from your other financial applications. Each project is then assigned an integration
template containing this preset integration information. You can use Integration Templates to
set up joint ventures, and new transactions added to that project will reflect the business units
defined in the integration template.
Intensity
The cost for each unit of the activity driver.
Interest
Some companies pay interest on the monies that are being withheld from employees’
paychecks. The interest plus the employees’ stock purchase contributions are used to
purchase stock at the end of the purchase period.
Interest Rate Modeling
An FSI feature that allows you to model interactively interest rate scenarios for Asset Liability
Management, and to run rate scenarios and analysis in real time.
Interest Rate Sensitivity Model
In the financial services industry, this support module describes in granular terms how a group
of customers holding a specific type of instrument with a particular interest rate will respond
to changes in interest rates in the market.
Interface Loader
An SQR delivered with PeopleSoft Asset Management that is used to transfer load lines into
the PeopleSoft Asset Management loader tables.
Internal Data
Data from PeopleSoft ERP systems, or other legacy ERP systems used by your organization.
Interpolation
To calculate a value of a function, or series, between two known values.
Interunit Account
The account for each business unit to which other business units in the same corporation refer
when they need to distribute amounts across business units. These accounts are used to keep
the individual ledgers in balance when a single transaction affects multiple business units.
GLOSSARY
102
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Inter-Unit Drivers
Drivers that provide a means of establishing relationships between the cost objects of one
organization with the supporting activities of the organizations that share business units and
models.
Interunit Transaction
A transaction that involves moving amounts from an account in one PeopleSoft General
Ledger business unit to an account in another General Ledger business unit.
InterUnit Transfer
A transfer that occurs between different business units.
IntraUnit Transfer
A transfer that occurs within one business unit.
Intrinsic Rewards
A reward that is generated by the worker internally such as job satisfaction, as opposed to
Extrinsic Rewards which are tangible rewards.
Inventory Adjustment
A process that enables you to change the quantity of an item in the inventory system to match
the actual physical quantity found in the Storage Location.
Inventory Business Unit
Usually a warehouse. You establish a separate inventory business unit (IBU) for any one of
the following reasons: 1) You want on hand visibility to a specific location of your business
that manages inventory. 2) You want to define replenishment rules for a specific location of
your business that manages inventory. 3) You maintain standard and average costs in a
specific location of your business that manages inventory.
Inventory Cost Element
A cost that can be associated with inventory items and inventory transactions. Examples
include freight, overhead, and transportation. Each cost element has a unique cost code.
Inventory Item
A tangible commodity that is stored in an Inventory business unit (Ship From warehouse).
Inventory Location
See Storage Location.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
103
GLOSSARY
Inventory Policy
In PeopleSoft Inventory Planning, a set of rules that controls how inventory policy values are
calculated for items. Inventory policy is defined at the Policy Control Group and
stockkeeping-unit levels. The elements that make up inventory policy are order quantity,
safety stock, Reorder Point, and minimum and maximum policies.
Inventory Transaction
An event that moves inventory into, within, or out of the inventory business unit. Examples
include material transfers, inventory adjustments, and standard issues.
Inventory Transaction Group
An identifier that categorizes transactions by type for costing purposes. For example, you can
group all types of interunit transfers together.
Invoice Format Identifier
An identifier for the formatting options that determine the sorting and summarization levels of
invoice information.
IRC 423 (Internal Revenue Code 423)
The section of the IRC that defines a Qualified Employee Stock Purchase Plan.
IRR Fiscal Data Accumulation
This report accumulates all retirement deductions for employees, as well as any LWOP and
any basic pay that was received when an employee was not covered by the CSRS or FERS
retirement plans.
IRR Remarks
Special remarks that are documented on an employee's IRR. IRR Remarks can be set up
ahead of time and can be system-entered text or employee-specific.
IRR Status
IRRs can be in pending or final status. Those in pending status can be updated and corrected.
A final status indicates that the IRR has been processed and can't be updated or corrected
except through a Correction IRR or a Supplemental IRR.
IRR Worksheet
A preliminary IRR form that enables an agency to print a pending IRR for a separated
employee, review it and make corrections, if necessary. Agencies can also use the IRR
Worksheet to view a current IRR for an active employee.
GLOSSARY
104
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
ISO IRS $100K Limit
The limit the IRS places on the exercisable value of Incentive Stock Options (ISOs) of $100K
per calendar year based upon the fair market value at the time of grant (Section 422 of the
Internal Revenue code).
ISO to NQ Grace Period
The period of time after which an Incentive Stock Option is treated as a Non-Qualified Stock
Option for tax purposes upon the termination of employment according to Internal Revenue
Code Sections 421 and 422. Depending on the termination reason the option is treated:
•
If the termination reason is for any reason other than death or disability, and an
exercise occurs more than three months from the termination date, the system
withholds taxes as if the option is a non-qualified stock option.
•
If the termination reason is disability, the system withholds taxes if an exercise occurs
more than twelve months from the termination date.
•
If the termination reason is death, the system always treats the option as an ISO.
Issue
See Material Issue.
Issuer
A legal entity that has the power to issue and distribute a security.
Item
See Inventory Item Planning Item or Receivables Item.
Item Content Provider
Third-party software consisting of web-based catalogs of item and price information. These
systems benefit the design and purchasing of new products by accelerating item location,
maximizing design reuse, and reducing acquisition costs. PeopleSoft Purchasing,
Engineering, and Inventory integrate to Item Content Providers, and the information is used by
many other PeopleSoft applications.
Item Rounding Rules
A set of rules determining how fractional values are rounded so that calculations result in
whole numbers. Rounding rules are used in conjunction with Quantity Precision Rules.
Item Simulation
In PeopleSoft Demand Planning, a process that enables you to interact with the forecast in a
manageable manner and perform "what-if" analysis by comparing the effects of different
forecast models.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
105
GLOSSARY
Item Type
An identifier that defines inventory items at a very high level, and may include sets of Item
Families. For example, the families Computer Items and Office Furniture might be
categorized by types like Outside Manufacturing, Finished Goods, and Work In Progress.
Item-Specific Conversion Factor
A conversion between the same two units of measure when the measurements have a different
value for an item. For example, a conversion between packaging unit and stocking unit.
Iterative Processing
Refers to a concept on only re-calculating those payees who have had changes and need to be
recalculated (if you choose to run your payroll multiple times before actually finalizing it).
This concept saves you a lot of time as you only have to recalculate those payees who have
had a data change or who you indicate you would like to be recalculated.
J
Java Server Handlers (JSH)
The JSH manages network connectivity, making service requests from the Jolt Repository,
and translating Tuxedo buffer data into the Jolt buffer.
Java Station Listeners (JSL)
The JSL handles the work of the client connection, tracking client messages, and session
handoff.
Job Code
An ID for a job as defined on the Job Code table.
Job Code Components
The pay components assigned to a job code by associating rate codes with job codes on the
Default Compensation page or the Non-Base Compensation page of the Job Code table.
Job Code Cost
Evaluation of salaries for specific job codes.
Job Compensation Rate
The compensation rate of the corresponding job row.
GLOSSARY
106
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Job Events
Actions relevant to an employee’s employment—such as a hire, transfer, or termination—that
can affect benefit program or plan eligibility. Used by PeopleSoft Benefits Administration.
See Event Class.
Job Order Cost Accounting
A cost accounting method that attempts to develop a discrete cost for each job performed or
product produced. Only the material, labor, and overhead required to complete the job are
attributed to the job cost.
Joint and Survivor Payment Option
A form of pension payment in which benefits are paid for the life of the participant and a
beneficiary. Should the beneficiary outlive the participant, the benefit continues (often in a
reduced amount) for the life of the beneficiary.
Joint Staffing Report
In the United Kingdom governmental agencies are required submit the Joint Staffing Report.
Although it is mainly designed for government sector organizations, commercial organizations
may also use this SQR to provide a summary of their staffing by department, job code, gender
and full/part time employment status.
Jolt
A BEA/Tuxedo companion product that runs on an application server domain and is used to
listen for Web Client Java requests and transfer them to Tuxedo.
Journal Code
The second highest level of three categories for defining a financial transaction (or document),
necessary when using document sequencing. Examples of journal code are domestic sales and
export sales. This category is preceded by journal type and followed by document type.
Journal Generator Template
A table containing defaults to be used in journal generation. PeopleSoft Asset Management
and Billing require one journal generator template for each transaction type.
Journal Line
A record storing a double-sided, balanced entry for a given journal. A single journal usually
includes multiple lines. The sum of the monetary amounts for the journal lines in one journal
totals zero (debits = credits).
Journal Template
A list of the characteristics of the general ledger journal entries that will be created from your
PeopleSoft Receivables system.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
107
GLOSSARY
Journal Type
The highest level of three categories for defining a financial transaction (or document),
necessary when using document sequencing. Examples of journal types are sales journal and
purchase journal. This category is followed by journal code, then document type within the
journal code.
Journal Voucher
A PeopleSoft Payables voucher that enables you to make accounting entry modifications
while keeping your PeopleSoft General Ledger and Payables systems in sync. Like the
adjustment voucher, the journal voucher is linked to an existing voucher.
K
Kanban ID
A unique identifier used to track Kanban cards and replenishment requests when using
PeopleSoft Flow Production.
Keep Ledgers in Sync
An option in PeopleSoft General Ledger that defines how a transaction should be posted—to
all ledgers in a ledger group as opposed to only a single specified ledger.
Key
See ChartKey.
Key
One or more fields that uniquely identify each row in a table. Some tables contain only one
field as the key, while others require a combination.
Key Performance Indicator (KPI)
KPI is used by the PeopleSoft Performance Management analytical applications. KPIs are
high-level measurements of how well an organization is doing in achieving critical success
factors. A KPI defines the data value or calculation from the Data Warehouse tables upon
which an assessment is determined.
KPI (Key Performance Indicator)
See Key Performance Indicator.
Knowledge, Skills, And Abilities (KSA)
Also known as Competencies, these are attributes required to perform a job and are generally
demonstrated through qualifying experience, education, or training. Knowledge is a body of
information applied directly to the performance of a function. Skill is an observable
GLOSSARY
108
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
competence to perform a learned psychomotor act. Ability is competence to perform an
observable behavior or a behavior that results in an observable product.
L
Labor Costs
Actual expenditures associated with salary portion of time reporter expense.
Labor Dilution
A process that occurs after the Labor Distribution process in PeopleSoft Time and Labor. The
labor dilution process takes the costs that the payroll system has calculated for payable time,
determines an average or rate per hour, and applies the average amount evenly across all
reported hours for the day.
Labor Distribution
The process of distributing payroll expense to the corresponding payable time entries
generated in PeopleSoft Time and Labor.
Labor Distribution Amount
An actual labor cost associated with reported time.
Last Equivalent Increase (LEI)
Reflects the effective date of the last step received in grade or the last promotion, whichever is
most current (does not include QSI). Used as the basis to establish an employee's WGI due
date.
Last Physical Counting Event
The last date the inventory item was counted. This information is stored with each inventory
item.
Last Purchase Date
The item's most recent purchase date in the inventory business unit.
Last Putaway Date
The item's most recent putaway date in the inventory business unit.
Last Putaway Document Number
The item's most recent putaway document identification number in the inventory business
unit.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
109
GLOSSARY
Last Receiving Date
The item's most recent receipt date in the inventory business unit.
Last Shipping Date
The item's most recent ship date in the inventory business unit.
Last Shipping Document Number
The item's most recent shipping document identification number in the inventory business
unit.
Law Enforcement Officers (LEOs)
Positions within the Federal government involving law enforcement. Under FEPCA, many of
these positions are entitled to additional special pays.
Lead-Time Estimated Usage
An inventory planning method for calculating historical usage of an item. The historical
demand is prorated on a daily basis and then multiplied by the number of days lead time for
each effective historical period. The maximum period value is then used as the safety stock or
minimum stock level. This method should be used for items that have a steady demand
pattern throughout each period.
Lead-Time Period Usage
An inventory planning method for calculating historical usage of an item. The purchase lead
time is rounded up to a specified number of periods. The historical demand is calculated as the
maximum usage during these periods and the safety stock or minimum-stock level is set to
this value.
Leave
Time entitled to an employee as a benefit, such as, Sick, Vacation, STD, and LTD. This
process is managed by HRMS (see Time Reporting).
Leave Accrual Processing
Processing of leave accruals is used to maintain employee leave balances. All leave benefit
plans accrue leave by length of service or number of hours worked. Leave accrual processing
is used to determine the employee’s leave accrual award and resulting leave balance.
Leave Accruals
Hours that employees earn to use at another time, such as annual leave and sick leave.
Leave Plan
A method for earning and managing leave time.
GLOSSARY
110
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Leave Without Pay (LWOP) Total (Cumulative)
An employee's cumulative number of hours of leave without pay (LWOP).
Ledger Group
In PeopleSoft General Ledger, a group of ledgers consisting of one primary ledger
andsecondary ledgers.
Ledger Mapping
Ledger mapping is a process that enables you to relate expense data from your general ledger
accounts to resource objects. Multiple ledger line items can be mapped to one or more
resource IDs. You can also use ledger mapping to map dollar amounts (referred to as rates) to
business units. You can map the amounts in two different ways: an actual amount that
represents actual costs of the accounting period, or a budgeted amount that can be used to
calculate the capacity rates as well as budgeted model results. In the PeopleSoft Enterprise
Warehouse (EW), Ledger Mapping enables you to map general ledger accounts to the EW
Ledger table.
Ledger Template
A table containing records and fields common to all ledgers that ensures that all ledgers
specified in a ledger group share the same physical layout.
Ledger Type
The unique combination of a single ledger, scenario, and fiscal year. Multiple ledger types
make up a ledger type set.
Ledger Type Set
A collection of ledger types, the members of which will represent the members of your ledger
type dimension.
Legend ID
A way of recording information that is displayed upon the Issuance Instruction Report. Can
be used to record a notice that should appear on the back of a stock certificate indicating that
the shares represented are "Restricted Securities." Can also be used to indicate how shares
should be processed, as in the case of Swaps, Trades, Repurchases and SAR Exercises.
Level
A section of a tree that organizes groups of nodes.
Defines a set of Forecast Item with a common key structure. Each level is related in a
hierarchical definition with other levels in the view. A level definition contains descriptive
and control data that relates to the operation of the forecast at each level within the view.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
111
GLOSSARY
Level
The section of a tree that organizes groups of nodes.
Level Income Payment Option
An annuity form of pension payment in which payments are increased in early years (prior to
eligibility for Social Security benefits) and decreased in later years when Social Security
benefits are also received. The goal is to provide a relatively constant total retirement income
both before and after Social Security eligibility.
Life Profile
In PeopleSoft Demand Planning, a feature that enables you to establish product forecasts
based on predefined patterns in an item's life cycle.
Lifecycle (of Reported Time)
A representation of time through the various stages of Time and Labor; includes processing of
current, future, and previous period time from scheduling and time capture through Time
Administration and distribution.
LIFO (Last In First Out)
Method used by companies to record Disqualifying Disposition Income. If a company uses
this method they record the optionees disposition of shares by attributing the shares to the
most recent exercise, purchase or release dates for which shares remain available for sale.
Line-Item Budgets
The budget amounts associated with ChartField distributions that make up an organization’s
budget. Line-item budgets include personnel costs as well as operating and maintenance
costs. They also include revenue estimates. PeopleSoft Budgeting-specific.
Line Schedule Editor (LSE)
PeopleSoft Production Planning utility or tool that displays production tasks for multiple
products on multiple resources across multiple periods of time.
Literal Mapping
In PeopleSoft Demand Planning, a mapping option for formatting data that is common to all
records being imported. This enables you to set an available field value for all the loaded
rows.
Load
The feature that initiates a process to automatically load information into a PeopleSoft
application—for example, populating the PeopleSoft Benefits database with plan-level
election information.
GLOSSARY
112
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Load Activation
Load Activation enables you to specify exactly which part of your Data Mart to build,
including security. You set up load activation on the Load Activation page.
Load Planning
The PeopleSoft Inventory feature that picks, packs, and ships orders by Load ID. Load
Planning is also used to estimate shipping weight, volume, and charges.
Loader Table
Any table in PeopleSoft Asset Management used to store load lines before they are loaded into
the system as open transactions. The loader tables comprise INTFC_FIN, INTFC_PHY_A,
and INTFC_PHY_B.
Loan Exercise
A form of cash exercise, typically requiring a loan agreement and a promissory note.
Local Code
In PeopleSoft Demand Planning, a type of validation used for a user-defined field code. If a
user-defined field is marked to require local table validation, User-Field Code are used to
determine the list of valid values for the field.
Local Functionality
Local functionality is the set of information in PeopleSoft HRMS that is available for a
specific country. You can access this information when you click on the appropriate country
flag push button in the global window, or when you access it by a local country menu.
Location Accounting
An accounting method that captures and records material movement within the warehouse,
providing accounting visibility based on where the inventory resides. You can designate
certain Storage Area as raw material, WIP, or finished goods by assigning the corresponding
account ChartField (account, department, product, and project ID) to the storage area. All
inventory locations in a storage area use the storage area account.
Location Code
Locations enable you to indicate the different types of addresses a company has—for example,
one to receive bills, another for shipping, a third for postal deliveries, and a separate street
address. Each of these addresses has a different location number. Every customer role must
have a primary location, which will be used throughout the system on all panels that display a
customer address. The primary location—indicated by a 1—is the address you use most often
when contacting the customer, and may be different from the customer's main address.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
113
GLOSSARY
Location Summary
A Picking Plan option that sorts the picking plan according to the highest-level sort options
defined and prints the order lines and the total item quantity to pick from each Storage
Location. Because the layout of the printed report reflects the actual positions of stock to be
picked, personnel can follow a serpentine path through the warehouse, fulfilling all orders on
the picking plan without revisiting locations.
Lock for Confirm
A flag on the Pay Line record that enables users to access the database 7 days a week, 24
hours a day, without affecting or interrupting payroll processing. Issues a warning message
“A payroll is currently in process for this employee. This data will not be processed until the
next payroll."
Log file
One way that you can monitor the build process is to review the log files that the build process
automatically generates. Keep in mind that the log file is entirely separate from the script file;
do not confuse the two. How much information that the log file contains is up to you. You
can set up your logging so that all status (both good and bad) appears in the log, or you can
specify that just the errors or warnings appear in the log. This section describes the options
you can specify in regards to the Build log file.
Long-Term Variable Compensation
In PeopleSoft Workforce Analytics, a component of direct compensation that consists of longterm payments to an employee in the form of stock programs, and deferred compensation.
Lookup Codes
In the financial services industry, these are user-defined codes that enable the system to define
and categorize incoming Instrument table information. They also provide a means for you to
report on specific data, such as treasury position, balance type, and ledger account.
Lot Status
The status assigned to a lot. In PeopleSoft Inventory, a lot’s status can be Hold, Open,
Rejected, or Restricted.
Lump Sum
A tax method that determines withholding based on the Canadian Lump-Sum tax table.
Lump Sum Payment Option
A form of pension payment in which some or all of a participant's benefit is paid as a single
sum.
GLOSSARY
114
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Lump Sum Reporting
A Time and Labor process that enables you to report time in a lump sum of hours or units for
a single Time Reporting Code, and quantities of time. The system uses a batch process to
gather the information you enter, perform edits, and update the daily time tables. The system
uses the default assignments you establish for workgroups, taskgroups, shifts and so on.
M
Maintenance Worksheet
A work space for creating write-offs, matches, or adjustments to clean up posted items.
Manage Base Pay Structure
See Base Pay Structure
Manage Compensation Planning
A PeopleSoft Workforce Rewards module that facilitates modeling and analysis of
compensation costs across organization units, specific job classifications, or groups. You can
focus on the impact of changes to workforce size, or on changes to fixed and variable
compensation elements, and determine their effects on current and future payroll costs.
Manage Market Compensation
A PeopleSoft Workforce Rewards module you use to match your company’s jobs to similar
jobs found in published market compensation surveys. You then calculate a target market rate
based on a weighted average from multiple surveys. This market rate is then used to assess
your company’s gap to market and to perform cost impact analysis.
Manage Retention Planning
A PeopleSoft Workforce Rewards module that enables organizations to analyze the factors
that lead to employee turnover, and how retention of key employees affects business
performance and goals.
Manual Checks
Any checks calculated and prepared outside of the PeopleSoft Payroll system that you must
enter into the system manually.
Manual Count
A PeopleSoft Inventory procedure in which you enter the actual count data and then create the
counting event with its header, item records, and count quantities.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
115
GLOSSARY
Manual Events
Events that are inserted by the user manually through the BAS Activity table. Events are
actions that occur, which potentially change employee benefit coverage eligibility—see Event
Class for more information. Used by PeopleSoft Benefits Administration.
Manufacturing Cost Element
A particular category of an item's cost. For example, when you produce a subassembly that
has a cost of $100, the cost can be broken down further into material costs, labor costs, and
overhead costs.
Manufacturing Execution Systems (MES)
Third-party system that enables detailed planning and execution of production activities from
production order release to completing finished goods. PeopleSoft Manufacturing integrates
to MES.
Manufacturing Task
Any job that can be performed within your manufacturing facility. A manufacturing task is
associated with the work center in which the task is completed.
Map File
A file that defines the relationship between fields in a third-party system and PeopleSoft
Demand Planning tables.
Mapper Type
This defines whether you are mapping actual or budgeted general ledger line items to resource
ID within PeopleSoft Enterprise Performance Management.
Marginal Tax Rate
The tax rate that applies to the next dollar of income generated.
Market Compensation
A compensation review process in which you match your company’s jobs to similar jobs
found in published market compensation surveys, for the purpose of establishing new target
market rates. Also referred to as Market Based Pricing or Market Analysis.
Market Capitalization
The value of a corporation as determined by the fair market value of its issued and outstanding
common stock. It is calculated by multiplying the number of outstanding shares by the current
fair market value of a share. Analysts look at market capitalization in relation to book, or
accounting, value for an indication of how investor’s value a company’s future prospects.
GLOSSARY
116
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Market Rate
Compensation rates, usually for regular base compensation or total cash compensation, found
in published salary surveys. You use the Market Compensation module in PeopleSoft
Workforce Rewards to age and weight this data, to create market rates you can compare
against your organization’s current pay rates.
Mark-to-Market (MTM) Model
In the financial services industry, the reevaluation of a portfolio’s position at current market
levels.
Market Variance
A comparison of the difference between an individual's, or group's, actual compensation, and
available market compensation data for a comparable population in industry. Market
compensation data is usually tied to job codes, and comparisons are usually made between
similar jobs. Although the variance to market can be evaluated for any of the compensation
components in the Compensation tree hierarchy (such as Total, Direct, or Base), market
compensation data is most typically available for, and used in evaluating Base Pay (Base
Salary). The main point of reviewing the market variance is to evaluate how well your
workforce is paid in comparison to both prevailing compensation in industry, and your own
organization's compensation strategy.
Mass Adjustment
A process of applying an amount or percentage change to one or many line item budgets at
once. PeopleSoft Budgeting-specific.
Mass Cancellation of Requisitions and Purchase Orders
A utility that allows you to select and cancel groups of requisitions and purchase orders. You
can use this utility during the year as well as at year-end in preparation for closing. The utility
enables you to specify ChartField criteria for selecting documents for cancellation. For
example, you can select all requisitions or purchase orders for a particular fund and
organization, which have a remaining balance. Then you may select a subset of those records
to approve for cancellation.
Mass Change
A user-configurable entity that defines the movement of data between the tables that store
your business information. Mass Changes enable you to define the criteria by which you
move or replace data in your tables. Based on the configuration of your system, Mass Change
dynamically builds data access and gives you complete control over your system processing.
Mass Change Template
The foundation for defining mass changes. Mass change templates enable you to control
which fields will be available for the operator to specify when defining a mass change, and
whether those fields will be used as selection criteria or defaults.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
117
GLOSSARY
Mass Change Type
The building blocks used in defining mass change templates. Mass change types specify
which records the resulting mass change will select From the database, alter, and subsequently
write back To the database. They also set up system field defaults that run behind the scenes
to ensure that this mass change is processed correctly.
Mass Validate Metadata Utility
A PeopleSoft Enterprise Warehouse utility that enables you to validate, but not compile,
Metadata objects. Mass Validate certifies all “as of dates” created for Filters, Constraints and
DataSets for the specified run date. This utility helps ensure that your Metadata is valid at run
time and increases your chance of a successful engine run.
Match
A process in PeopleSoft Workforce Planning, by which the system compares the roles,
competencies, and accomplishments in the current competency inventory, with the
requirements of a given competency strategy.
Matched Punches
A period between two consecutive punches during which some activity happens measured
intervals.
Match-Funding
In the financial services industry, Match Funding refers to funding an asset with a like (term to
maturity) liability. This helps an organization apply the appropriate funds transfer price.
Although the actual asset might be funded with shorter-term liabilities, it does provide a better
measure of financial performance for that asset, such as Risk Adjusted Return on Capital.
Material Costing
An inventory accounting method that assigns a cost to items in inventory. These costs can be
assigned equally across all items or tracked individually for each item.
Material Issue
An event that triggers stock fulfillment requests for items in inventory.
Material News
Company news that could be expected to affect the value of a company's securities or
influence investors’ decisions. Material news includes information regarding corporate events
of an unusual and non-recurring nature, news of tender offers, unusually good or bad earnings
reports, and a stock split or stock dividend.
Material Release
A PeopleSoft Manufacturing process that—after material has been picked—decrements on
hand inventory balances for the inventory storage areas and increments inventory to the WIP
GLOSSARY
118
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
locations defined by the routing or production area. The process also changes the production
ID's or production schedule's status from Released to In Process.
MAX Method
See Maximum Method Policy.
Maximum Compensation Hours
The greatest number of hours to be paid for a specified TRC (see Time Reporting).
Maximum Lead-Time Usage
In PeopleSoft Inventory Planning, a policy control value that sets the safety stock level to the
maximum quantity required during the lead time. This method is normally used when the
demand for an item is low or intermittent but sufficient stock must always be available.
Maximum Method Policy
In PeopleSoft Inventory Planning, a policy that controls the way in which the system
determines a reasonable high limit for the maximum inventory level of an item. The system
provides warning messages when the inventory level exceeds the maximum level.
Maximum Taxable Wage Base
An annual earnings threshold used for Social Security purposes. Pension plans sometimes
provide different levels of pension benefits for earnings above and below the Maximum
Taxable Wage Base.
Measure
A measure represents the amounts brought into a cube—the numerical data.
In data warehousing, a Measure is a field type used interchangeably with fact. Measures are
types of amounts. Any numeric field you want to apply a Data Manager rule against should
be a measure.
Measure ID
In the Define Market Compensation module of PeopleSoft Workforce Rewards, a Measure ID
is the identification code for a measure. For market compensation surveys, the Measure ID
describes the percentile for each type of pay, as well as the regression statistic type. In
PeopleSoft Workforce Analytics, for Benchmark Surveys, the Measure ID describes the type
of benchmark.
Measure Value
In PeopleSoft Workforce Rewards, Measure Value is the calculated market rate value from
market compensation surveys for a given percentile of a market rate, and for a given scenario
and job code. This is the annual rate you compare against the compensation paid for similar
jobs in your company. The Measure value can also be the regression statistic value used for
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
119
GLOSSARY
Regressing Market rates. In PeopleSoft Workforce Analytics, for Benchmark Surveys, the
Measure Value is the delivered Benchmark Ratio.
Member
A member is the OLAP equivalent of a node or detail value on a PeopleSoft tree. A member
is a single item within a dimension, such as a single product name, department ID, or part
number. Member names must be unique, even across dimensions. Cube Manager uses the
term Dimension Field Mapping to identify members, dimension parents, and label mappings.
Merchant
In PeopleSoft eStore and Mobile Order Management, a level of online (web or wireless
device) display and order processing controls set by the seller. See also Merchant Variant.
Merchant Variant
Associated with a user ID, a subordinate level of merchant controls that enable customers to
access different variations of the same PeopleSoft eStore website. In PeopleSoft Mobile
Order Management, variations are primarily used to differentiate order processing options and
fulfillment methods or locations.
Merit Matrix
In PeopleSoft Workforce Analytics, a matrix used to define the amount rules for base
compensation increases for your workers. A Merit Matrix provides the salary increase
parameters for each review rating in a rating scale. The salary increase parameters are
expressed in terms of a percentage. The percentage increase amounts are usually structured to
express the company’s pay strategy relative to employee performance, and the employee’s
degree of range penetration in their salary range.
Merit Matrix Increase
In PeopleSoft Workforce Analytics, an increase to an employee’s base pay awarded based
upon a Merit Matrix.
Message definition
The object definition specified in Application Designer which contains message information
for PeopleSoft’s Application Messaging system.
Metadata
Information about data. Metadata is the information a database or application stores to
describe your business data. At its simplest, metadata defines the structure of a data field—its
data type and size, for example. Metadata can also describe more complex data relationships,
such as the rollup structure for a chart of accounts. Reporting and analysis tools should be able
to use this metadata to let users access data just as they would from within the application,
without having to understand how it is stored.
GLOSSARY
120
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
For Enterprise Performance Management, metadata is used to describe the data stored in the
PeopleSoft Enterprise Warehouse. There are different types of metadata, for example,
TableMaps, DataMaps, and constraints. You typically define these when you set up the
warehouse; however, Metadata (particularly constraints and DataMaps) is used to develop
business rules that manageaspects of the dimensional models. Metadata enables technical
users to define relationships between warehouse tables and enables business users to easily
identify the data that interests them without having to know the database structure.
Meta-SQL
Meta-SQL: Meta-SQL constructs expand into a platform-specific SQL substrings. They are
used in functions that pass SQL strings, such as in SQL objects, the SQLExec function,
Application Engine programs, and so on.
Metastring
Metastrings are special expressions included in SQL string literals. The metastrings, prefixed
with a percent (%) symbol, are included directly in the string literals. They expand at run time
into an appropriate substring for the current database platform.
Method
A method can only be executed from an object, using dot notation. You have to instantiate the
object first, before you can use the method.
For Enterprise Relationship Management, a method is the algorithm or formula that defines
how the budget amount for a line-item budget is calculated or how it is derived if a calculation
is not necessary. Types of methods include amount per FTE, itemization, annual percent
growth rate based on a historical figure, and number of units multiplied by cost per unit.
PeopleSoft Budget Planning-specific.
Method Amount
The amount for a line item budget resulting from the application of a method. It represents the
budget amount after the method is applied to a line-item budget but before any adjustments or
allocations are applied. PeopleSoft Budgeting-specific.
Method Base
The defined value to which a method is applied, if applicable. Not all methods require a base.
PeopleSoft Budgeting-specific.
Method Driver
The factor used in a method’s algorithm. For the method, amount per FTE, FTE is considered
the driver. PeopleSoft Budgeting-specific.
Method of Payment
In PeopleSoft Grants, designates whether a payment is to be through a cost invoice or a Letter
of Credit.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
121
GLOSSARY
Method Parameter
A defined and derived value within a method, which drives an expense or revenue calculation.
For the method, Amount per FTE, the number of FTEs is considered the driver parameter.
PeopleSoft Budgeting-specific.
Metric
A metric is a calculation of facts. A metric is usually a number, but can be anything you want
to measure.
Metric Object Security
Metric Object Security determines whether an individual can see a metric object in a Data
Mart.
Midpoint (Pay Range Midpoint)
In PeopleSoft Workforce Analytics, the middle value in a pay range, halfway between the
minimum and the maximum, calculated as (Minimum + Maximum)/2.
Midpoint Progression
In PeopleSoft Workforce Analytics, the percentage difference from one grade midpoint to the
next higher-grade midpoint, calculated as (Midpoint2 – Midpoint1)/Midpoint1.
MIN Method
See Minimum Method Policy.
Minimum Benefit
See Grandfathered Benefit.
Minimum Compensation Hours
The lowest number of hours to be paid for a specified TRC (see Time Reporting).
Minimum Method Policy
In PeopleSoft Inventory Planning, a policy that controls the way in which the system
determines a reasonable low limit for the minimum inventory level of an item. The system
provides warning messages when the inventory level drops below the minimum level.
Missed Punch
A punch that is not entered at the scheduled time (see Time Reporting).
GLOSSARY
122
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
mkvdk
Verity’s command-line tool used to index a collection, insert new documents, perform simple
maintenance tasks like purge and delete a collection, and control indexing
behavior/performance.
MLS
Multilingual support.
Modal transfer
Modal transfers allow you to transfer an operator from one component to another component
(the modal component) modally; that is, requiring the operator to OK or Cancel the modal
component before returning to the originating component.
Modal transfers give you some control over the order in which the operator fills in pages.
They are useful for finite tasks related to the main transaction. They are particularly useful in
cases where data in the originating component can be derived from data entered by the
operator into the modal component.
Model Equivalency Factors
In PeopleSoft Demand Planning, factors that adjust model errors to allow a fair comparison.
During the Model Reset process, the errors associated with each of the models are multiplied
by their associated factors. The factored errors are then compared to select the model with
minimum errors.
Models
In the PeopleSoft Enterprise Warehouse, Models enable replication of an organization’s
business processes for analysis of cost flow through customers, departments, and channels.
Model Recalculation
In PeopleSoft Business Planning, users may checkout slices of the entire model for their
appropriate role. This requires the entire model to be periodically recalculated to incorporate
the users changes for dependencies in other areas of the model.
Morphing
Morphing is a technique of automatically transforming the look and feel of an interface based
on the needs of an active object. The Application Designer toolbar and menus dynamically
transform based upon the type of object definition that is active.
Mortality Table
A table showing rates of death by age. Mortality tables are part of a pension plan’s actuarial
assumptions.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
123
GLOSSARY
Moving Average
In PeopleSoft Demand Planning, a model that averages a selected number of the most recent
demand periods and creates a forecast of demand for the next and subsequent periods.
Multibook
A functionality supporting the requirement of a company to carry one set of books in their
local currency (functional currency) and another set of books in the currency of their parent
company (reporting currency). In PeopleSoft General Ledger, multibook functionality is
multiple ledgers having multiple-base currencies defined for a business unit, and the option to
post a single transaction to all base currencies (all ledgers) or to only one of those base
currencies (ledgers). Also commonly known as dual-book.
Processes in PeopleSoft applications that can create both application entries and general
ledgers denominated in more than one currency.
Multicurrency
The ability to process transactions in a currency other than the business unit’s base currency.
Multidimensional Analysis
A type of analysis that enables you to look at data from many different dimensions, or
attributes. You identify the dimensions of the data, then combine the dimensions in various
ways. For example, you might identify five dimensions of your sales data: sales, region,
channel, product line, and time. Once you’ve identified the dimensions, you can “slice and
dice” the data based on combinations of these dimensions, such as sales in the Western region
for the last quarter.
Multidimensional Database (MDDB)
A database that stores data for multidimensional analysis in a proprietary multidimensional
format. Users access MDDBs exclusively for reporting and analysis, never transaction
processing, so they are optimized for retrieval speed.
For Enterprise Performance Management, a Multidimensional Database stores data for
multidimensional analysis in a proprietary multidimensional format. These databases are used
exclusively for reporting and analysis, and never transaction processing, so they are optimized
for retrieval speed.
Multiple Jobs
Multiple jobs allow you to hire an employee into more than one concurrent job and have them
processed through Payroll, Benefits, and Pension. In order to enable this feature, the Multiple
Jobs check box must be selected in the PeopleTools Options page.
Multiple-table dynamic tree
The user drills down through a hierarchy of parent and child records.
GLOSSARY
124
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Multivariate Forecasting Techniques
In Enterprise Planning and Simulation, this is a forecasting method that uses both the recorded
history for the target value and the history and forecasts for other variables (causal factors) to
infer, not only a forecast for the target value, but also a functional relationship between the
causal factors and the target value.
N
National Association of Securities Dealers, Inc. (NASD)
Self-regulatory organization of the securities industry responsible for the regulation of The
NASDAQ Stock Market and the over-the-counter markets. The NASD operates under the
authority granted it by the 1938 Maloney Act Amendment to the Securities Exchange Act of
1934.
National ID Number
Different countries track some form of National ID for payroll, identification or benefits
purposes. For example, German workers are assigned a Social Insurance Number, UK
workers have a National Insurance Code, and US laborers have a Social Security Number.
Each of these different types of National IDs has unique formatting requirements associated
with them as well.
Nature Of Action (NOA) Code
Indicates the type of personnel action being processed.
Nature Of Action Description
Describes the NOA code.
Nature Of Action Effective Date
The date the personnel action is effective.
Negative Amortization
Occurs when a loan payment does not cover the interest due on the loan payment, resulting in
an increase of the principal amount.
Net-To-Zero Adjustment
A prior period adjustment where no compensation affecting fields on the pre-existing
(original) record are changed by the adjustment.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
125
GLOSSARY
New Hire Report
In the United States the Personal Responsibility and Work Opportunity Act of 1996 (the socalled Deadbeat Dads law) requires employers to report new hires to specified agencies within
a pre-determined number of days from the hire date.
Next Level Item
In PeopleSoft Demand Planning, the Forecast Item at the next level that contains the current
item as a child. This is the key of the group item at the next level up and is always within the
same view.
Next Year
PeopleSoft Benefits term referring to the next open enrollment processing year.
NIC (NumГ©ro Interne de Classement) Code
In France NIC numbers identify the entities inside the same enterprise, and represent an
Internal Filing Number.
No Control
A target control that allows the user to submit a budget even if it is not within the planning
target and the tolerance levels. The system tracks the budget against the defined planning
targets but does not generate any warnings or validations. Users can still compare their
planning targets against their budget amounts on the Planning Targets page in Line Item
Budgeting.
Node
An individual item on a tree. Nodes summarize detail values or other nodes, and may or may
not roll up into other nodes or levels.
Node
A node is a name that you can use to refer to some source of HTML content. In more
practical terms, a node is a URI string that defines the database and server to be used when the
portal servlet attempts to retrieve content, proxy addresses, and assemble pages.
Non-Base Pay
A pay component not included in the job comp rate calculation. It is used by payroll only in
the paysheet calculation. For example, non-base pay can be set up for additional work,
holiday pay, bonuses, and so on.
Non-Benchmark Jobs
See Benchmark Jobs.
GLOSSARY
126
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Noncompetitive Action
An appointment or placement in a position in the competitive service that is not made by
selection from an open competitive examination, and that is usually based on current or prior
Federal service. A noncompetitive action includes:
•
All of the types of actions described under inservice placement, above
•
Appointments of non-Federal employees whose public or private enterprise positions
brought into the competitive service under Title 5 CFR 316.701; and
•
Appointments and conversions to career and career-conditional employment made
under special authorities covered in 5 CFR 315, Subpart F.
Nondiscrimination Tests (NDT Tests)
Tests used to help employers ensure that their organization’s 401(k), 401(m), and Section 129
dependent care reimbursement plans do not discriminate in favor of highly compensated
employees. See Highly Compensated Employees.
Non-Employee
Those workforce resources hired to perform a specific job and/or hired for a specific period of
time. Although non-employee time will be entered into Time and Labor for the purposes of
managing their Task time, non-employee earnings will not be updated to Payroll and they will
not be paid through the Payroll system.
Non-HR Employee [Time and Labor]
An individual employed by the corporation who is administered outside of the PeopleSoft
Human Resources system.
Non-Job Event
Actions which result in changes to an employee’s personal or demographic information that
also affect benefit program and plan eligibility—such as an a state or postal code change, a
family status change like a divorce, or a birthdate change. Used by PeopleSoft Benefits
Administration. See Event Class.
Non-Productive Time
Any employee scheduled work time spent on tasks (or non-tasks) other than those which the
employee was hired to perform. This could include time spent in training, time spent in
meetings, travel time, and time spent reporting time.
Non-Qualified Dependent
Dependents such as domestic partners, their children, and other people who do not meet the
definition of qualified dependents as presented in IRS Section 152. PeopleSoft Benefits
applications enable the creation of benefit programs that offer health and life coverage to nonqualified dependents.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
127
GLOSSARY
Nonqualified Plan
A plan that doesn’t conform to ERISA rules. Employers cannot take a tax deduction for
contributions to a nonqualified plan; instead, plan benefits are generally paid directly from the
employer's assets.
Nonqualified Stock Option (NQ)
Any option that does not satisfy the conditions of a statutory stock option under the Internal
Revenue Code and therefore does not qualify for preferential tax treatment. Generally,
companies can design nonqualified options in almost any way they like. Features are:
•
The grant price may be less than fair market value (with some exceptions under state
law).
•
Grants are not limited to employee of the company or subsidiary.
•
No taxable income is recognized at the time of grant.
•
Options can be granted to anyone (Employees, Consultants and Board of Directors).
•
Difference between the fair market value on the date of exercise and the grant price is
treated as compensation income.
•
In the U.S., withholding tax obligation arises at the time of exercise.
•
Company receives a tax deduction equal to the compensation income recognized.
Nontaxable Benefits
Any employer contributions that are not subject to Federal Withholding Tax, such as an
employer's portion of a 401(k) plan.
Normal Form of Payment
The payment form associated with the amount calculated by the benefit formula. Pension
Administration uses it as a basis for converting to optional forms of payment.
Normal Hours
The hours an employee is normally expected to be at work for any given workweek.
Normal Line Of Promotion (Career Ladder)
The pattern of upward movement from one grade to another for a position or group of
positions in an organization.
Normal Retirement Date (NRD)
The date on which an employee is eligible to retire and begin receiving pension benefits.
Eligibility for normal retirement is typically based on age only.
GLOSSARY
128
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Normalized database
A normalized table adheres to certain standards designed to improve the productivity of the
database user. Normalization makes the database much more flexible, allowing data to be
combined in many different ways.
The standards for a normalized database are called forms, such as first normal form, second
normal form, and so on.
Normalized Loss
In the financial services industry, Normalized Loss is the expected loss on a loan and is netted
out of the profit and loss statement for management accounting or profitability measurement
purposes. Similar to the bank’s loan loss reserve, it enables the institution to analyze and
account for expected losses on a more detailed level, by financial product.
Northern Ireland Report
In the United Kingdom the Fair Employment (Northern Ireland) Act of 1989 requires private
sector employers with more than 10 employees to submit the Northern Ireland report to the
Fair Employment Commission annually. The report indicates the religious composition
(referred to as Community Background—Catholic, Protestant, Other) of the workforce, job
applicants and appointees.
Not To Exceed (NTE) Date
Types are as follows:
•
Appointment NTE Date: Indicates the length of time a person may serve in a position.
•
Classification Temporary NTE Date: Established temporary date that is used for a
temporary classification of a unique position.
•
Hospitalization coverage.
•
LWOP NTE Date: NTE date is the last day the employee is in leave without pay
status. The employee is scheduled to return to duty the next workday.
•
Position NTE Date: Indicates the length of time a position is available for use.
•
Promotion NTE Date: Specific NTE Date: Specific time for an increase in grade on a
temporary basis.
•
Suspension NTE Date: Specific time an employee is to be on suspension. No salary is
paid for the period.
nPlosion
A PS/ nVision feature that enables you to expand rows and columns in your spreadsheet to
underlying details, as in drilldown.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
129
GLOSSARY
Numeric constant
Numeric constants are any decimal number used in PeopleCode.
O
Object-Based Modeling
Object-Based modeling technology enables you to create parent and child models. In the
PeopleSoft Enterprise Warehouse, you set up such models using the Scenario Manager.
Object reference
An object reference is one that uses the current object. For example, in the case of a
component, pages within the component are related objects. The menus that use the
component are its object references.
Occupant Of Position/Vice
Indicates new position or former occupant of a position.
Occupational Series Code
Designates a grouping of positions similar in work and qualification requirements. They are
designated by a title and four digit number (e.g., the Accounting Series, GS-0510).
Off Date
A specific date that is defined as an off day (see Scheduling).
Off Day
A 24-hour period rounded by daybreaker with no associated shifts (see Scheduling).
Off Day Type
A classification of off days (i.e. holiday, plant shutdown) (see Scheduling).
Off-Cycle Processing
The process of calculating and creating a paycheck for one or more employees aside from the
normally-scheduled (on-cycle) payroll run for their pay group. You typically use off-cycle
payroll processing for employees who are being terminated, new hires who weren't entered
into the system in time for the last on-cycle payroll run, and employees who received an
incorrect paycheck during a normal on-cycle payroll.
Offer Period
This is the period of time in which an employee’s ESPP share price is determined.
GLOSSARY
130
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Officer
An insider who sits on the Board of Directors and who is also an employee of the corporation.
Examples include CEO, CIO, CTO, CFO, COO, Corporate Secretary, and Treasurer.
Official Forwarding Address
An employee's mailing address following separation.
Official Languages Act (OLA)
Canadian federal institutions are required to report on the official languages used in their
departments, in accordance with the Official Languages Act (OLA).
Official Personnel Folder (OPF)
The repository of a Federal employee's official documents related to Personnel history.
Official Personnel Folder (OPF) Address
Indicates the address where the Official Personnel Folder is maintained.
Off-Invoice Discount (OI)
A per unit discount deducted from the customer invoice and given by a manufacturer for
promotional activities. Off-invoice discounts can originate from a National Allowance or
Customer Promotion, and are passed to PeopleSoft Order Management so the discounts are
applied correctly during order entry.
Offset Plan
A pension plan where the benefit formula includes an offset of a portion of the participant's
Social Security benefits.
OLAP
Online Analytical Processing. OLAP is the multidimensional analysis of application data,
performed interactively. The acronym contrasts with OLTP (Online Transaction Processing),
which is what most production business application systems do.
OLTP (Online Transaction Processing)
OLTP refers to the applications that perform the business transactions that keep your company
running, such as processing invoices or enrolling employees in benefits programs.
Ontario Employment Equity Commission (OEEC)
The OEEC requires employers in Ontario to complete workforce surveys.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
131
GLOSSARY
Open Enrollment
The scheduled annual re-enrollment of plan participants into appropriate benefit programs
and, within those programs, benefit options.
Open Price
The price at which a security starts a trading day.
Open Season
A time period during which Federal employees are open to re-enroll in a specific benefit plan
and option. Open Seasons can be scheduled at varying times throughout the year and multiple
Open Seasons can occur concurrently with each other. For FEHB processing, it is generally
the time period from mid-November through mid-December. For Thrift Savings Plan (TSP)
processing, these are semi-annual and are generally held from May 15 - July 31 and
November 15 - January 31. Open seasons for FEGLI are infrequent and special notification
from the OPM would be issued to all Federal employees should they occur.
Open Transaction
A transaction that has not yet been processed in PeopleSoft Asset Management.
Operation
In PeopleSoft Manufacturing, a job or task performed in a specified amount of time, done in
one work center, and using one or more resources.
Operational Data Store (ODS)
A staging area in PeopleSoft Enterprise Warehouse for source application data and preprocessed data for tables optimized for reporting.
OPF Code
Indicates where the OPF is maintained.
OPM
Office of Personnel Management.
Optimization
In PeopleSoft Demand Planning, the process of evaluating and improving forecast model
parameters.
Optimize
The process of creating a new PeopleSoft Planning schedule by repairing the violated
constraints in a schedule automatically. The Optimizer can be prioritized for meeting due
dates, for minimizing overtime costs, and so on.
GLOSSARY
132
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Option
A contractual right that gives the individual the option to purchase a specified number of
shares of stock through an Equity Compensation Plan. Also known as a grant. Regulatory
agencies also refer to an option as the right to purchase stock in an employee stock purchase
plan. These options are considered granted on the offering begin date.
Option Adjusted Cost (OAC)
In the financial services industry, the difference in the average expected return between an
instrument without embedded options that are otherwise identical to the fully loaded
instrument and the instrument fully loaded with embedded options.
Option Adjusted Spread (OAS)
In the financial services industry, the average return expected for an instrument, over the
short-term risk-free rate, for all projected interest rate paths generated using Monte Carlo
simulation.
Option Types
Types of stock options. PeopleSoft Stock Administration supports the following stock option
types. Incentive Stock Options (ISO), Nonqualified Stock Options (NQ), Tandem Incentive
Stock Options/Stock Appreciation Right (ISO/SAR), Tandem Nonqualified Stock
Option/Stock Appreciation Right (NQ/SAR), Restricted Stock Award (RSA).
Optional Forms of Payment
Any alternative forms of payment available to a participant retiring under a pension plan.
These can include: annuity options paid over the participant’s (and possibly a beneficiary’s)
lifetime; certain term options paid over a specified number of years; and lump sum options
paid out in a single payment.
Options Outstanding
The total number of option shares held by optionees. It is the number of Grants less the
number of Exercises, Cancellations, and Expirations.
Order Group
Order groups link order terms that default into sales orders and quotes when you select an
order group code.
Order Line Number
The line associated with an order identification number. The order line identifies an item and
the requested quantity.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
133
GLOSSARY
Order Quantity Policy
In PeopleSoft Inventory Planning, a policy that determines how replenishment order quantities
are calculated for an item. For example, you can use a static number, provide upper and
lower limits, or use an economic order quantity calculated by the system.
Ordinary Income Tax
An individual’s tax on earnings from wages, tips, and all other sources except capital gains.
Includes option profits upon exercise of non-statutory options.
Origin ID
A code that identifies the location of a payment deposit in PeopleSoft Billing. Origin ID also
distinguishes the method of the payment's entry: online, external, or lock box interface.
Billing origin ID identifies the remit to origin for billing. This function is mainly used for
specifying where the customer should send payment.
Original Option
A stock option that is eligible for repricing. This option has a grant price greater than the
current FMV.
OSHA 200 Occupational Injury and Illness Recordkeeping Log
In the United States this record-keeping logbook meets reporting requirements for reporting
occupational injuries and illnesses to the Occupational Safety and Health Administration
(OSHA). It lists the case numbers and details of each injury and illness that occurred during a
calendar year.
Out Punch
Indicates the end of a shift.
Out-of-the-Money
A term used to describe an employee stock option when the current market price is below the
option grant price. When an option is out-of-the-money, it costs more to exercise than the
underlying stock is worth. Such options are also described as being "underwater."
Output Result Tables
Refer to the database tables that are populated with information at the end of each pay
calculation.
Output VAT
VAT collected on sales or outputs.
GLOSSARY
134
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Outside Scope of VAT
A transaction determined as not subject to VAT. No VAT code is associated with this type of
transaction. The transaction is still logged in the VAT transaction table, but no tax is applied.
Outside The Register Appointment
An appointment in the competitive service made under an agency's applicant supply system
because either there is not a sufficient number of eligibles on the appropriate register or no
competitor inventory exists. Agencies are also authorized to make temporary limited
appointments outside the register at grades GS-12 and below.
Outstanding Option
A stock option that still has unexercised (vested or unvested) uncancelled or unexpired shares.
Options with a “pending” status are not included. Only options with a status of �active’ or
�suspended’ are considered outstanding.
Overlapping Promotions
Multiple customer promotions related to the same customer, and the same product, at the same
time.
Override Rate
Cost per hour or unit reported with time used to replace the time reporter’s default rate. (see
Time Reporting)
Override text
Text not derived from field descriptions.
P
Package level
The top level of organization is the package level. The package is the entire transaction set
file, addressed to your company much as a mail package would be.
Page
A page defined in Application Designer as part of a PeopleSoft Internet Architecture
application.
Page Assembly
Page assembly is one of the functions of the portal servlet. Page assembly involves
intercepting the user’s content request, retrieving the content, and properly formatting it using
a pre-defined portal template. To complete the page assembly process, the portal servlet
merges content from any HTML documents that it retrieves along with the defined template
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
135
GLOSSARY
HTML. The assembled page is then sent back to the user’s web browser as a single HTML
document.
Page buffer
Consists of rows of buffer fields that hold data for the various records associated with page
controls, including the primary records, related display records, derived/work records, and
translate table records.
Pagelet
A page designed to appear on a customized homepage. A pagelet is smaller than the typical
page dimensions in many PeopleSoft applications. It can be based on either a page designed
in Application Designer or on an iScript.
Paired Punches
Two punches for the same employee in chronological order that exists for the purpose of
determining the duration between the punches.
Par Value
The nominal or face value of a security. It establishes a price floor below which shares may
not be issued. With common stock, the company issuing the stock sets par value. Par value
has no relation to fair market value. Some companies issue no par value stock.
Parallel Processing
In the PeopleSoft Enterprise Warehouse, parallel processing is a system function that "locks
in" the information you use for processing. This enables the system to run identical or similar
processes at the same time without impacting your results. Running concurrent processes
greatly reduces the amount of time it takes to run within the system.
Parent Budget
In commitment control, you can build a hierarchy between different budgets, such as summary
and detail budgets. Specifying a relationship of parent and child between a summary and a
detail budget for purposes of budget inquiries enables you to retrieve information about either
budget through the other.
Parent/Child Models
Object based modeling technology enables you to create parent and child models. In the
PeopleSoft Enterprise Warehouse, you set up such models using the Scenario Manager.
Parent node
A tree node linked to lower-level nodes or details that roll up into it. A node can be a parent
and a child at the same time, depending on its location within the tree.
GLOSSARY
136
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Parent Task
A higher-level Planning task in a schedule's hierarchy that drills down into subtasks. Its start
time is the start time of its earliest subtask, and its end time is the end time of its latest subtask.
Planning tasks are distinct from Manufacturing tasks.
Partial Pay
The pay processed whenever a job record has an effective date in the middle of a pay period.
Typically, this happens whenever you hire, terminate, transfer, or change the rate of pay for an
employee mid-period.
Participants
Individuals who elect to participate in the stock purchase plan.
Participation
The PeopleSoft Pension Administration function that determines whether an eligible employee
has met the plan's rules for joining the plan. Generally, these rules are based on age and
service criteria.
Participation ID
In the financial services industry, this is a lookup code used by the financial analytic
applications to identify the participants (syndicators) involved in, or responsible for, a
financial instrument or group of instruments.
Passive Control
A target control allowing the user to submit a budget even if it is not within the planning target
and tolerance rules. The system responds by sending an email to the user of the next budget
center level indicating that the budget exceeded planning target tolerance levels.
Passive Events
Events that are initiated by a change that has taken place over time, rather than by a direct data
entry action. Events are actions that potentially change benefit coverage eligibility. Examples
of passive events include an employee’s reaching the age of retirement. See Event Class for
more information.
Pattern Reporting
A Time and Labor process that enables you to report a start and stop date, a pattern of one or
several time reporting codes, associated hours, amounts, or units and task information once for
an employee. The system transforms the information into instances of daily time for each
scheduled employee work day based on the employee’s schedule.
Pay
Types of "pay" are as follows:
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
137
GLOSSARY
•
Basic Pay: generally, the total amount of pay received during any one calendar year
at the rate fixed by law or administrative action for the position held by the employee
or judicial official prior to any deductions and not including any special payments or
premium pay.
•
Gross Pay: total compensation earned by an employee, annuitant, or survivor of a
judicial official prior to any deductions. Includes basic pay plus locality pay;
availability pay (if any) for LEOs; special payments (if any); an annuity (if any); plus
awards (if any).
•
Premium Pay: pay provided to an employee as a regular addition to basic pay (e.g.,
administratively uncontrollable overtime (AUO), availability pay, overtime, night
differential, holiday pay, etc.).
Pay Basis
A code indicating the principal condition in terms of time, procedures or criteria, that serves as
a basis for computing an employee's pay.
Pay Calculation
Formula that calculates an employee's gross to net.
Pay Calendar
Payroll processing cycle for a given pay group.
Pay Components.
Rows in the compensation record. They build the compensation packages in the
compensation record.
Pay Confirmation
Process in which the system updates all to-date totals on the database for earnings, deductions,
and taxes for pay groups assigned to a given Pay Run ID.
Pay Entity
A pay entity is the organization responsible for making payments to payees. You can also use
a pay entity to define the type of currency to be used when processing calculations. The pay
entity is a legal definition of an organization from a payroll perspective. In many cases, an
organization and a pay entity are the same. However, PeopleSoft Global Payroll does not
define a relationship between an organization and a pay entity.
Pay Frequency
Defines how often employees in a pay group are paid—weekly, biweekly, monthly, and so on.
GLOSSARY
138
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Pay Group
A set of employees grouped together for payroll processing. It’s a way of “bundling” payees
for more efficient processing. A pay group is made of payees that the system processes at the
same time during a pay run.
Pay Period
The established time segments for which employees in a pay group are paid. Pay Periods are
defined by their beginning and ending dates.
Pay Plan
A code that denotes the pay schedule under which an employee is paid , e.g., JS, UG, UJ, etc.
Pay Slip
Either an actual check or an advice notice of a direct deposit. You build these to match your
organization’s needs. A pay slip is the details of a payment you’ve made.
Pay Structure
In PeopleSoft Workforce Analytics, Pay Structure consists of a series of pay ranges or grades,
each with a minimum and maximum. You develop pay structures to support and reinforce
your company’s pay strategy (for example, to target the market 50th percentile).
Payable Date
The date that a corporate distribution, such as a dividend, is payable to the record holders of a
corporation’s securities.
Payable Time
Time that is ready to be collected by the payroll system (see Time Reporting).
PayCycle
A set of rules that define to PeopleSoft Payables the criteria by which it should select
scheduled payments for payment creation.
Payee
Any payroll recipient. A payee can be an employee or a non-employee of an organization.
Payee Process Stat Record
A record created for each payee during the payroll process. The system creates one Process
Stat record per payee for each calendar.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
139
GLOSSARY
Payee Section
Type of section that can be added to a process list. A payee section defines a set of elements
that is to be resolved for a particular payee.
Payline
Record containing standard payroll information for an employee, such as the amount of
regular pay, number of regular hours, additional pay (if any), and tax information and job data.
Payment Interface
An Application Engine process that loads payment information from the Banks Statement
tables and the Staging tables to the Application tables and performs various checking and
default operations.
Payment Predictor
PeopleSoft Receivables' automatic cash application feature that pairs open items with
unapplied payments based on predefined algorithms.
Payment Schedule
A schedule of payment dates for leased assets.
Payment Selection
A process by which PeopleSoft Payables selects scheduled payments that are eligible to be
paid in a pay cycle.
Payment Worksheet
The work space in which open items are paired with unapplied payments.
Payroll Certifying Officer
The individual with the delegated authority for approving all items relating to payroll for those
employees under his/her authority.
Payroll Process Tables.
Records holding data necessary to process a payroll, such as employee, company, and tax
information.
Paysheets
Repository for the raw data necessary to calculate pay for employees, including earnings,
hours, deductions, taxes, and accounting data.
GLOSSARY
140
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
PBGC Rates and PBGC Grading
The interest rates published monthly by the Pension Benefit Guaranty Corporation. There is
an "immediate" rate that applies once benefits commence as well as a series of “graded”
rates—calculated based on the immediate rate—that are used during the time between benefit
determination and a deferred benefit commencement.
Pegged Chain
A method the PeopleSoft Enterprise Planning and Production Planning solvers use to
determine feasible plans. The method ties tasks together in order to explicitly record which
supplies are being used to satisfy which demands. Through this process, the Planning engine
first determines which independent demand has the highest priority. Then, it determines the
lateness preference ranking for dependent demand tasks.
Penalty
A user-assigned value for constraints that can be violated, determining how the schedule's
score will be calculated. Setting the penalty configures the constraint to your priority. Use the
Control Page to assign a higher penalty to violations that are more critical to your schedule or
a lower penalty to constraints that you can deal with externally.
Pending Exception
Any known exception to an employee's scheduled workday. Pending Exceptions are future
dated (future is defined to be for a date under report beyond the last date of the employee's
current pay period).
Pending Item
Information in PeopleSoft Receivables that has been entered in or created by the system, but
hasn't yet been posted. During the Receivable Update process, the system uses the pending
items to update customer balances—either by creating new items or by adding item activity
lines to existing items.
Pending Time
Time that has been reported or is assumed to have been reported (based on employee work
schedule and calendar date) that has not been used by the business entity. Pending Time may
be for past, current, and future pay periods. It is the label for those time transactions that are
waiting to be used by the business (for example, approved and unapproved time not yet
updated to Paysheets).
Pension Status
An employee’s standing with regard to a particular pension plan. For example, employees can
be active participants, terminated deferred vested, or in pay status.
PeopleCode
PeopleSoft's proprietary language; it is executed by the PeopleSoft Application Processor.
PeopleCode generates results based upon specific actions, based upon existing data or the
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
141
GLOSSARY
actions of a user. Business Interlink Objects are executed by calling the execute() method from
PeopleCode. This makes external services available to all PeopleSoft applications wherever
PeopleCode can be executed.
PeopleCode Event
An action that an end-user takes upon an object, usually a Record Field, that is referenced
within a PeopleSoft page.
PeopleSoft Activity-Based Management (ABM)
A PeopleSoft Analytic Application that aligns organizational costs with operational activities,
enabling a coordinated approach to expense and PeopleSoft Activity-Based Management.
PeopleSoft Activity-Based Management identifies and assigns operational activities to
products, customers, or services.
PeopleSoft Analytic Applications
These are applications within Enterprise Performance Management (EPM) that help you
enrich the data in the PeopleSoft Enterprise Warehouse and perform forward looking
simulations and scenarios. These applications include: PeopleSoft Activity-Based
Management (ABM), PeopleSoft Asset Liability Management (ALM), PeopleSoft Balanced
Scorecard (BSC), PeopleSoft Funds Transfer Pricing (FTP), PeopleSoft Risk Weighted
Capital (RWC), and PeopleSoft Workforce Rewards. PeopleSoft Funds Transfer Pricing and
PeopleSoft Risk Weighted Capital are applications that target the financial services industry
(FSI).
PeopleSoft Asset Liability Management (ALM)
PeopleSoft Asset Liability Management provides financial service institutions with the
analytical tools to define, measure, monitor and manage interest rate risk, liquidity risk,
options risk, and to some extent exchange rate risk. The primary audience for PeopleSoft
Asset Liability Management is the financial institution’s Asset/Liability Committee (ALCO).
PeopleSoft Balanced Scorecard (BSC)
PeopleSoft Balanced Scorecard converts an organization’s vision and strategy into a
comprehensive set of performance and action measures that provide the basis for a strategic
management system.
PeopleSoft Budgeting
A budgeting application that is a combination of Education and Government (E&G) Budget
Planning and Budgets (commercial). This application resides on the EPM database, primarily
using the ODS layer of the PeopleSoft Enterprise Warehouse for its data.
PeopleSoft Business Analysis Modeler (BAM)
A multi-dimensional modeling tool used to support several analytic applications.
GLOSSARY
142
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
PeopleSoft Business Planning
A planning application that enables financial executives to model various alternatives and set
corporate financial targets to achieve their strategic goals. PeopleSoft Business Planning
integrates with PeopleSoft Analytic Forecasting, PeopleSoft Activity Based Management,
PeopleSoft Workforce Analytics, and PeopleSoft Budgeting applications.
PeopleSoft Customer Behavior Modeling
A PeopleSoft application that enables you to: a) create a customer profile by extracting
customer data from the Enterprise Warehouse; b) create segments and samples from the
profile to efficiently target marketing campaigns and further analyze customer behavior; c)
append to it additional data from external sources such as demographic, credit or
psychographic information; d) use a data mining tool to create a predictive model; e) score the
customers in your profile using the predictive model. You can then publish the results to
another transactional application.
PeopleSoft Customer Scorecard
A product that provides a pre-defined set of customer-oriented key performance indicators
(KPIs), to help you build a scorecard specific to your organization. This scorecard facilitates
the measurement and communication of customer satisfaction, customer activity, and
objectives across your organization.
See also PeopleSoft Balanced Scorecard
PeopleSoft Enterprise Performance Management (EPM)
Enterprise Performance Management is a comprehensive, integrated analytic business solution
designed to increase the value of organizations by enabling people to make better decisions.
The PeopleSoft Enterprise Performance Management product line consists of the PeopleSoft
Enterprise Warehouse and optional analytic applications and Data Mart products.
PeopleSoft Enterprise Warehouse (EW)
PeopleSoft's data warehousing solution. The PeopleSoft Enterprise Warehouse provides the
tools necessary to query, analyze, and present information to provide the optimal environment
for business intelligence. It is the central repository for data that will be used with the analytic
applications in the Enterprise Performance Management product line, and can also serve as a
standalone data warehouse. The PeopleSoft Enterprise Warehouse consists of dimension, fact,
reference, and error tables, reporting and ETL tools (Informatica PowerMart), as well as the
Operational Data Store (ODS). The tables in the PeopleSoft Enterprise Warehouse are
maintained separately from your transaction-based systems to allow for comprehensive
analysis of data originating from any Online Transaction Processing (OLTP) or legacy system.
PeopleSoft Funds Transfer Pricing (FTP)
A PeopleSoft Analytic Application that enables an institution to accurately measure and tune
profitability. PeopleSoft Funds Transfer Pricing is an interest rate that represents the value of
an asset or liability to the institution. PeopleSoft Funds Transfer Pricing is based on market
rates, adjusted for risk and cost variables, specific to the institution. By assigning PeopleSoft
Funds Transfer Pricing to each item on the balance sheet, the institution can remove the
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
143
GLOSSARY
effects of interest rate volatility from business units, so that profitability measurements are
based on factors within their control, that is, credit quality, pricing and product strategy.
PeopleSoft Operations Data Stores (PODS)
See Data Warehouse Tables
PeopleSoft Marketing Insight
A tool that helps you analyze your marketing campaigns and activities. It helps you determine
the effectiveness of marketing events based on factors such as number of leads generated,
profiles of respondents, campaign return on investment, and campaign forecasted costs to
complete.
PeopleSoft Risk Weighted Capital (RWC)
A PeopleSoft Analytic Application that enables the financial services industry to accurately
measure capital that has accounted for risk. RWC allocates capital to various levels within a
financial institution according to risk, providing the opportunity to measure performance
based on how well each business unit, product, customer, or transaction generates income
given its perceived level of risk as quantified by the allocation of capital.
PeopleSoft Sales Activity Insight
A tool that helps you analyze key components of the sales process, such as pipeline status,
discount analysis, and sales process.
PeopleSoft Support Insight
A tool that helps you determine the effectiveness of your customer service organization. It
helps you answer questions such as: Are we effectively handling customer issues? Has
contact center performance changed from last year to this year? Which product quality issues
are most prevalent?
PeopleSoft Workforce Analytics (WFA)
PeopleSoft’s complete workforce analysis solution, which includes the PeopleSoft Workforce
Rewards analytical application and the PeopleSoft Workforce Analysis Insight. The complete
solution set includes the PeopleSoft Enterprise Warehouse and PeopleSoft Balanced Scorecard
products. It helps to manage strategic employee compensation, goals, and competencies, as
well as retention.
PeopleSoft Workforce Rewards
PeopleSoft Workforce Rewards is an analytical application you use to align your workforce
compensation and retention initiatives with the strategic objectives of your organization.
Modules include Market Compensation, Base Pay Structure, Compensation Planning,
Workforce Simulation, and Retention Management. You integrate data from multiple internal
and external sources, enrich it using rules you define based on any data in your PeopleSoft
Enterprise Warehouse, and simulate multiple scenarios of future workforce compensation and
GLOSSARY
144
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
retention activity. You then analyze and evaluate your scenarios, and make actionable
decisions you can communicate back to your PeopleSoft ERP systems for execution.
PeopleSoft Portal
The portal bundled with every PeopleSoft 8 application. It provides a simple navigation
system, based on existing menu definitions that have been imported into the portal registry.
Navigation to content outside of PeopleSoft applications is not provided.
Percent Cycles Without a Shortage
In PeopleSoft Inventory Planning, a method used with safety stock policies. The value is
derived from the percentage of replenishment cycles that will complete without a stockout.
Percent Demand Fill
In PeopleSoft Inventory Planning, a method that can be used with safety stock policies. This
method defines the percentage of the total quantity ordered that must be filled without a
backorder.
Percentage Tolerance
The acceptable percentage difference between expected cycle count quantities and actual
quantities counted in PeopleSoft Inventory. This value provides a margin of error for an item
during cycle count reconciliation count quantities.
Performance Appraisal Code
Indicates the level of performance of an employee.
Performance Appraisal Due Date
Date established based on the WGI or LEI for the yearly appraisal of an employee.
Period Closing Offset
In Time and Labor, the closing date beyond which this pay period is not considered current
any longer, if the period’s closing date is different from its end date. You can enter a positive
or negative number of days.
Period Method
In PeopleSoft Inventory Planning, a method used to determine how a single static policy value
is to be calculated from time-phased results with static policies.
Period of Interest
The maximum period of time containing the data needed to run all the rules in a rule program
(see Batch Processing)
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
145
GLOSSARY
Period Segmentation
When an element (like compensation rate) changes mid-period, requiring all other elements in
the process list to be calculated multiple times on either side of the date on which the change
took place, period segmentation is used. The system calculates each element more than once,
using the components that were effective during the different time slices. The system keeps
the results of these calculations separate with the object of creating two gross-to-net result
sets.
Periodic Processing
In PeopleSoft Pension Administration, any of several batch processes that a plan administrator
must run on a regular basis—for example, consolidation of payroll data.
Personal List
A user-created list of products defined in PeopleSoft eStore, used to quickly populate the
shopping cart when creating a new order in either PeopleSoft eStore or Mobile Order
Management.
Personal Register (Registre Unique du Personnel)
In France, companies are required to be able to produce, at any given time, a Personal
Register. For a given establishment, this report lists current employees and employees who left
up to 5 years ago.
Personnel Action
Personnel actions are changes to employee data or status resulting from such activities as
promotions, transfers, terminations, salary increases, and leaves of absence.
Personnel Representatives (DГ©lГ©guГ©s du personnel)
In France it is mandatory for companies with more than 11 employees to elect personnel
representatives who will represent all of the employees before management.
Perspective
In PeopleSoft Balanced Scorecard, a category for organizing critical success factors and key
performance indicators. Usually there are four: financial, customer, internal process, learning
and growth.
PF Ledger
The PF Ledger (PF_LEDGER_F00) is an important fact table within the PeopleSoft
Enterprise Warehouse. The primary function of the PF Ledger table is to support PeopleSoft
Enterprise Performance Management reporting. The data that gets posted to the PF Ledger
must be accurate and clean.
GLOSSARY
146
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
PF Business Unit
PF Business Units differ from other PeopleSoft Business Units in that they represent
functional or strategic areas of an organization, rather than separate legal entities.
Phase Type
A label for the different phases you want to define for a project. Costs can then be calculated
by project phases. Examples include planning, startup, construction, and cleanup.
Physical Accounting
The PeopleSoft Inventory feature that updates tables based on count result input, regardless of
how the count was created or the data collected.
Physical Inventory Process
In PeopleSoft Asset Management, the process by which you extract asset data from the Asset
Management database to load into your bar code scanning device. You then scan the assets
and load the data gathered during the actual physical inventory into Asset Management,
enabling you to generate physical inventory results for review. You perform matching and
generate transactions to reconcile the data in Asset Management with the results of your
physical inventory.
PIA
PeopleSoft Internet Architecture. This is the fundamental architecture on which PeopleSoft 8
applications are constructed, consisting of an RDBMS, an application server, a web server,
and a browser.
Piece Work
Method of compensating time reporters based on units completed rather than hours worked
PIN
Technical term for an element. In PeopleSoft Global Payroll, PIN is often referred to in the
online object names and within the batch code. PIN stands for Pay Item Name.
Placeholder
A temporary location designator in an engineering bill of material for a component item that
has yet to exist. These temporary placeholders have to change into approved items before
transferring engineering bills of material (EBOM) to manufacturing bills of material
(MBOM).
Plan Administrator
The person selected by the employer to perform the administration of a plan under PeopleSoft
Pension Administration.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
147
GLOSSARY
Plan Eligibility
The PeopleSoft Pension Administration function that uses job data to determine whether an
employee may participate in a pension plan. An employee can be eligible based on job data
but not be participating because of an unmet service or age requirement.
Plan Type
A unique ranges of codes used during payroll calculation to determine deduction processing
rules. See also Benefit Plan Type.
Plan Year
The annual period that a pension plan uses to measure service, earnings, and benefits.
Generally, the pension plan year will match the fiscal year of the plan sponsor.
Planning Item
A non-inventory item designated as being used for planning purposes only. It can represent a
family or group of inventory items. It can have a planning bill of material or planning routing,
and can exist as a component on a planning bill of material. A planning item cannot be
specified on a production or engineering BOM or routing, nor used as a component in
production. Quantity on hand will never be maintained.
Planning Level
The level ona dimension’s tree used for planning. Typically, a customer will choose not to
plan at the lowest level of available detail, such as the individual product level. Instead, the
individual products are mapped to their corresponding product group and the planning is done
at the product group level.
Planning Targets
The amount the budget must equal, such as a budget spending limit or cap for expenses where
users can not exceed the amount. Planning Targets are presented at a summary level. This
term is interchangeable with Spending Limits.
Planning Target Tolerance
The percentage and/or amount a user can be over or under the planned budget target.
Planning Target Control
Values set at the user role level, including no control, active control, and passive control. For
more information see no control, active control, and passive control.
Planning Task
Any activity in PeopleSoft Planning that creates a schedule.
GLOSSARY
148
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
PODS (PeopleSoft Operations Data Stores)
See Data Warehouse Tables
POI. Personnel Office Identifier.
Also known as Submitting Office Number (SON). These are codes assigned by the OPM to
the office(s) delegated authority within an agency to process personnel actions on Federal
employees.
Pointers
A pointer is an "address" of a driver quantity, or value, within the Enterprise Performance
Management product line. Pointers are used as a means of defining where driver quantities
exist in tables that reside in the PeopleSoft Enterprise Warehouse. Pointers enable you to
extract values from any location in the warehouse and then use these values as driver
quantities. There are three different kinds of pointers: explicit, implicit, and multidimensional.
Policy Control Group
In PeopleSoft Inventory Planning, a feature for setting up order quantity, safety stock, reorder
quantity, and maximum and minimum policies. The Control Group is assigned to a set of
Planning Item. The policies of the associated planning items can be set explicitly or
defaulted from the policies on the policy control group.
Policy Generation
In PeopleSoft Inventory Planning, a set of run options used to control the functions and
behavior of the Policy Generation program.
Policy Item
An item record which is related to a location and for which Inventory Policy is held. A
policy set, Planning Item ID, and Location ID uniquely identify a policy item. The
combination of an item and a location is called a stockkeeping unit.
Policy Set
Defines a set of the items for which Inventory Policy is to be calculated. Each policy set is
assigned a unique ID and includes information that defines, for example, the associated
Forecast View, time periods, and planning horizon.
Policy Simulation
In PeopleSoft Inventory Planning, a feature that simulates the effects of various stocking
scenarios, compares current policy with simulated policy, and determines the best inventory
investment strategy.
Population
A Population is defined on top of DataMaps created using Enterprise Warehouse metadata.
The Population builder allows you to easily format a SQL statement, using filters, to select
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
149
GLOSSARY
rows from one or more tables joined together in a DataMap. You can view the results of a
Population directly from the browser.
Pop Up Payment Option
A variation on a joint and survivor payment option under which the benefit payable to the
participant is increased if the beneficiary should die prior to the participant.
Portal
A portal is a web site that helps you navigate to other web-based applications and content.
Users often consider a portal their “entry point”—the place they typically visit first after
launching their web browser.
Portal Registry
The portal registry is a tree-like structure in which content references are organized, classified,
and registered. It is a central repository that defines both the structure and content of a portal
through a hierarchical, tree-like structure of “folders” useful for organizing and securing
content references.
Portal Registry API
The Registry API is provided for accessing each portal registry from PeopleCode, COM, Java,
or C programs. Providing the same kind of registry management capability as the online
administration pages, it can be used by external systems to update the registry to reflect
changes in the content reference URL, taxonomy, and effective dates. The Registry API is
fully described in the PeopleCode documentation.
Portal Servlet
A Java servlet that runs on a web server. The portal servlet intercepts user requests for
content, retrieves content, and builds a single HTML document to be displayed in the user’s
browser.
Portal Solutions
Portal Solutions are separate product offerings from PeopleSoft that consist of pre-built,
packaged solutions focused at different audiences (customers, suppliers, and employees).
Because they are both pre-built, supported application products, Portal Solutions can be
deployed swiftly and easily, saving significant resources when compared to other custom-built
solutions.
Position
The officially assigned duties and responsibilities that make up the work performed by an
employee. Positions are linked to Job Codes, which can be considered the electronic version
of the Position Description. There can be a many-to-one relationship between the Position and
Job Code.
GLOSSARY
150
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Position Budgeting
The budget amounts (salary, benefits, and earnings) associated with positions within an
organization. Position budgeting can be calculated based on position information loaded from
a human resource system. Position budgets are used to generate line-item budgets for
personnel costs. PeopleSoft Budgeting-specific.
Position Change
A move by an employee to another position during the employee's continuous service under
the same appointment within the same agency.
Position Date Created
Date the position was created for use in the agency.
Position Description (PD)
In accordance with OPM guidelines, an official description, authorized and approved by an
agency official, describing duties and responsibilities to be performed. Position classification
standards are used to describe the work, classify the work components by occupational series,
and factors (e.g. supervisory control, scope, complexity, competencies required) are used to
determine the grade level (i.e., salary range) for the position.
Position Description Number
A number assigned to identify various types of Position Descriptions.
Position Description Required
Identifies those positions for which a position description must be maintained.
Position Number
A number that identifies an authorized Position.
Positive Input
Data such as hours worked or a bonus amount entered for elements that change each pay
period. Positive input can be entered manually, generated by the system, or received from
other applications.
Positive Task Reporting
A method of time reporting in which all required task elements must be provided (see Time
Reporting)
Positive Time Reporting
A method of time reporting in which all elements of time must be provided (see Time
Reporting)
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
151
GLOSSARY
Post Differential Percent
Additional compensation that may be paid to certain employees who work in Guam or the
Northern Mariana Islands.
Post Differential, Non-Foreign
A differential payable to an employee at a location in a non-foreign area if conditions of
environment differ substantially from conditions of environment in the contiguous United
States and warrant its payment as a recruitment incentive.
Post-56 Military Deposit
The OPM provides guidelines to Federal agencies on how to calculate and process these
voluntary employee deductions from pay toward the employee's current retirement fund for
those periods of eligible military service.
Posting
In PeopleSoft the process by which accounting entries are created or updated based on user
transaction input and accounting entry templates. In PeopleSoft Receivables, posting is also
known as Receivable Update.
These posted accounting entries in the feeder systems,such as accounts receivable or accounts
payable, must be further processed by the Journal Generator to create journal entries before
posting to the General Ledger occurs.
Post-Tax Deductions
See After-Tax Deductions
Pre-encumbrance
An encumbrance that occurs before an employee/employer relationship exists. You encumber
funds for an employee you have on staff; you pre-encumber funds for an employee that you
anticipate hiring. For example, you would pre-encumber funds for a new position that has just
been approved but not filled.
Pre-encumbrance Ledger
Stores pre-encumbrance amounts. Updated by posting pre-encumbrances, such as purchaseor hiring-requisition source transactions (including journal entries).
Premium
Any additional compensation for extra hours worked, often expressed in terms of factorabove-normal-per-hour pay, such as time and a half (where one-half is premium pay), double
time or triple time. Also, any additional pay provided to a time reporter based on
compensation rules (see Time Administration in your PeopleSoft Time and Labor
PeopleBook).
GLOSSARY
152
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Prenote
A prenotification or waiting period requested by banks before processing payroll direct
deposits.
Pre-Retirement Survivor Annuity (PRSA)
A benefit paid to a beneficiary if a pension plan participant dies before commencing benefits.
Qualified plans must offer a pre-retirement survivor annuity, although the employee can be
required to pay for the coverage with a reduction in the benefit.
Pre-Tax Deductions
See Before-Tax Deductions
Previous Day's Close
The previous trading day's last reported trade.
Price Break
Defined in PeopleSoft Order Management, and linked with price sets, a price break defines the
actual adjustments that are made to the list price. They are valid only within a time frame you
establish.
Price Rule
Used in conjunction with price sets, rules are essentially a decision tree that establishes the
search order the system uses in reviewing sets for a match on the variables they reference for
price adjustments.
Price Set
Linked with price breaks, a price set specifies the parameters for your price adjustment. It
establishes selection criteria, determines whether the break is based on quantity or price, and
defines how the adjustment is applied.
Price Source
A service provider or publication that reports the trading activity for a stock traded on stock
exchanges. Examples include Wall Street Journal and Bloomberg.
Primary event code
Primary event codes, also called purpose codes, specify the status of the transaction: whether
it's a new transaction, a cancellation, a duplicate, a status request, and so on. Every transaction
has a primary event code assigned to it.
Primary Insurance Amount (PIA)
The benefit amount calculated under the Social Security benefit formula.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
153
GLOSSARY
Primary scroll record
Primary scroll records are the principal SQL table or view associated with a page scroll level.
A primary scroll record uniquely identifies a scroll level in the context of its page: each scroll
level can have only one primary scroll record; and the same primary scroll record cannot occur
on more than one scroll at the same level of the page.
Prior Period
In Time and Labor, any payroll period before the current one.
Prior Period Adjustment
A change or correction to previously reported time or task information, or an insertion of time
or task information. Often requires the original report to be offset (reversed) and the correct
information to be recorded. (see Time Reporting)
Priority Rank
The numeric value assigned to inventory Demand Priority Rules. The lower the number, the
higher priority of the rule and the orders matching that rule.
Private
A tracking method used by a privately held company to track their daily prices. The Board of
Directors typically establishes a price for a period of time. Stock of a privately held company
is not traded on an exchange.
Private Views
User-defined views available only to the user who created them. For more information, see
Budget Views.
Process
See Batch Processes.
Process Definition
Process Definitions are created in the Process Scheduler Manager pages to define each
specific run request. A Process Definition is comprised of a variety of variables including
panels associated with a request, Process Groups, output parameters, run locations, and many
more.
Process Group
Used to associate specific Process Definitions with a Class Profile in Security Administrator.
This allows administrators to restrict an operator's ability to initiate requests.
GLOSSARY
154
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Process Instance
A unique number that identifies each process request. This value is automatically incremented
and assigned to each requested process when the process is submitted to run.
Process Job
Multiple Process Definitions can be logically linked into a job request to process each request
serially or in parallel, and optionally initiate subsequent processes based on the return code
from each prior request.
Process List
The set of instructions the system uses during a payroll process to determine which elements
to resolve. A process list is comprised of sections that identify the sets of elements to be
resolved. You build process lists and attach them to calendars.
Process List Manager
The program used during batch processing that reads the Process List and calls the PIN
Manager to resolve elements on the list.
Process Request
A single "run request," such as an SQR, a COBOL program, or a Crystal report that you run
through Process Scheduler.
Process Run Control
A PeopleTools variable used to retain Process Scheduler-defined values needed at runtime for
all requests referencing a run control ID. This is not to be confused with application run
controls, which may be defined with the same run control ID, but only contain information
specific to a given application process request.
Process Scheduler
A PeopleTool that performs tasks behind the scenes of your application. It can run several
kinds of processes, such as COBOL, SQR, and Application Engine programs. You can
schedule processes to run on a regular schedule or at your request. Processes can run on your
workstation or on a server.
Process Scheduler Server Agent
The server-based program (PTPUPRCS) that manages the selection, validation, and initiation
of all queued requests for each defined server within your batch environment (Process
Scheduler).
Process Type
A global process definition under which related process definitions are grouped. This allows
for easy maintenance of Process Definitions that share common parameters.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
155
GLOSSARY
Processing group
In order to partition application processing between the client and the application server, it is
necessary to define units that, as a whole, run in one location or the other. We call these units
processing groups.
Processing groups can encompass one or more PeopleCode events. Some processing groups
can run either on the client or on the application server, such as Component Build and
Component Save.
Product
A commodity primarily defined in PeopleSoft Order Management. It may be: 1) The Order
Management view of an inventory item that has attributes the same as or different from those
of its inventory counterpart. 2) A commodity that is not a stocked inventory item such as a
product kit or a service. 3) A tangible commodity that is drop shipped from another vendor
and is never stocked in inventory.
Product Alternate
Alternative products that can replace the product ordered when it’s out of stock or a problem
with a particular product temporarily prevents shipment.
Product Catalog
A configurable list of available products that may be of interest to a specific customer. You
can create two types of catalogs—inclusive catalogs that contain all the products you want
made available to a customer and exclusive catalogs that contain the products you want to
withhold from your customer. By attaching product catalogs to a Sold To customer, you
define the products they can buy.
Product Definitions
This support module describes how other support modules process the instruments that belong
to a particular product. For example, different products have different cash flow
characteristics and may be stratified differently, or may react differently to changes in interest
rates. This module enables you to specify each of these actions for each instrument.
Product Kit
A commodity that consists of a fixed set of components that are sold together. It appears as a
single line on an order, but is represented by multiple lines on shipping documents. Product
kits may comprise inventory items, non-stockable products, or a combination of both.
Product Kit Component
A commodity that is part of a product kit. It may be an inventory item or a non-stockable
product such as a service.
GLOSSARY
156
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Product Pricing Model
In the financial services industry, this defines models that describe indices upon which future
rates are paid or charged for an individual product.
Product Tree
A user-defined graphical representation of a company’s product structure. A product tree
defines how products are promoted and determines what users have authority to promote those
products.
Production Maintenance Spreadsheets
A set of spreadsheets generated by an nVision process, containing production ID and
production schedule data extracted from PeopleSoft Production Management. You can add
and maintain production quantity data using these spreadsheets and then import the data back
to Production Management.
Production Option
Effective-dated combinations of BOM codes and routing codes. You can create multiple
effective-dated BOM code/routing code combinations (or production options) for an item.
These combinations can be extracted to PeopleSoft Production Planning. They enable the
specification of multiple production variations for an item and provide control of seasonal
variations by effective date.
Production Option Cost
A cost based on a specific BOM/routing combination (also known as a production option).
The Production Option Cost utility rolls up production options costs based on specific
BOM/routing combinations, enabling you to cost individual production options and later to
have the DataLink pass this cost to the Planning engine. If this utility isn’t run, the Planning
engine will use the standard item cost based solely on the primary BOM and routing instead.
Productive Time
Employee scheduled time spent performing any task for which a position was created; work
performed on behalf of a business entity that is required for that entity to fulfill its business
purpose. Employees doing the work they or someone else was hired to do.
Productive Unit
In Italy employers organize employees into productive units based on agreements between the
unions and the employer.
Profile
A data set that you aggregate from the Enterprise Warehouse, according to the filters you
specify, the Key Performance Indicators you select, and the 3rd party demographic data you
include.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
157
GLOSSARY
Profile Factor
In PeopleSoft Demand Planning, the weight index assigned to each Forecast Period to take
into account seasonal fluctuations in demand. The factor or index typically measures the
percentage of difference between the base demand and the expected actual demand in the
period.
Profiles
Group of employees defined according to a list of job codes and departments. You can use
these profiles to ascertain training demands within your organization based on set criteria.
Profit Manager
The Profit Manager is a set of integrated tools that enable true profitability reporting. Profit
Manager features are tightly integrated with the PeopleSoft Analytic Applications and provide
you with ways to ensure data integrity, edit data, and post data to the Performance Ledger
table.
Project
The highest level of hierarchical organization within PeopleSoft Projects. Projects provide the
structure to which activities and resources are added. Each node on a Projects tree represents
a project. Projects can contain other projects as well as activities and resources. This provides
a hierarchical relationship between projects and facilitates cost roll-ups.
In Enterprise Performance Management you use a Project to create or modify a Profile. A
Project contains pointers to data elements that you include in a Profile.
Project
In PeopleSoft Time and Labor, a specific endeavor undertaken to achieve a specific goal.
Typically, projects are approved and undertaken with level of cost, schedule, and performance
already agreed upon. A project is composed of a set of tasks, each of which requires staffing,
provisioning, and/or scheduling. Project progress is often measured in terms of task
completion.
Project ID
The name or number by which a project is to be identified in all tables and pages.
Project Type
A user-definable grouping of projects. Project types are optional.
Projected Run Date
In PeopleSoft Demand Planning, a calculation made that projects a life volume for a period
based on a calculated run rate or performance ratio.
GLOSSARY
158
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Projection.
An estimated pension benefit calculated as of a future date or any estimated data used as the
basis for such a calculation.
Promotion
•
For positions under the same type job classification system and pay schedule, a
promotion changes the employee to a higher grade level or makes permanent a
Promotion NTE;
•
When the old and new positions are under different job classification systems and pay
schedules, a promotion changes the employee to a position with a higher rate of basic
pay or makes permanent a Promotion NTE.
Promotion Pattern
In PeopleSoft Demand Planning, an Event function that enables you to apply weights to
promotions across a range of Forecast Period.
Prompting Profile
A task profile usually used by account managers as a way of creating task profiles for
employees who report task time differently by customer. For example, you might have an
account manager who has fifty customers; when the account manager comes in each day to
report time, the system will display all the customers, and indicate which customers it will use
as a default if she doesn’t manually report time.
Prorated
In Enterprise Planning and Simulation, prorated is when the computed forecast and the
summarized forecast are two different versions of the statistical forecast. In addition, the
forecast at the product family level can be allocated down to the individual products. Usually
this allocation is done in proportion to the calculated product forecasts at that level. This
version of the (statistical) forecast is called the allocated or prorated statistical forecast.
Pro-Rate Purchase
A purchase in which the number of shares to be purchased is prorated according to a specified
factor. This may occur when the total number of shares to be purchased is greater than the
number of shares allocated to the stock plan from the treasury.
Prorated Forecast
In PeopleSoft Demand Planning, a forecast developed by factoring the group forecast down
one level at a time to make the sum of the item forecast equal to the aggregate forecast. The
prorated forecast tends to be more accurate than the Statistical Forecast.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
159
GLOSSARY
Proration Rule
Element that defines how you want to prorate an item. You use proration rules in numerous
places—for instance you could prorate an earning, deduction, or many of the elements that
make up an earning or deduction.
Proration Threshold Ratios
In PeopleSoft Demand Planning, the upper and lower ratios used as thresholds for
Reasonableness checks when a forecast is developed using proration.
Provider
An entity, such as an insurance company, that provides one or more of the benefits your
company offers. For example, Metropolitan Life Insurance Company is a provider to
companies that use a Metropolitan life plan.
Proxy Person
A highly compensated executive. Corporations must include information regarding the most
highly compensated executive officers in their proxy reporting.
Proxy Statement
The document that must accompany a solicitation of proxy appointment under SEC
regulations. The purpose of a proxy statement is to provide shareholders with the appropriate
information to make an intelligent decision.
PSADMIN
A PeopleSoft utility providing a menu interface to create, configure and administer application
server domains and the Process Scheduler Server Agent (Batch Server).
PSADMIN
A PeopleSoft utility providing a menu interface to create, configure and administer application
server domains and the Process Scheduler Server Agent (Batch Server).
PSAPPSRV
PSAPPSRV is the main server process running within a domain. PSSAPPSRV performs the
functional requests, such as building and loading components. It also manages the memory
and disk-caching for PeopleTools objects on the application server. Each PSAPPSRV process
maintains its own memory and disk cache.
It provides authentication services for incoming users. For instance, it checks the PeopleSoft
OPRID against the directory server or PSOPRDEFN table.
GLOSSARY
160
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
PSQCKSRV
Essentially, PSQCKSRV is a copy of the PSAPPSRV. It performs quick, read-only SQL
requests. It is an optional Server Process designed to improve performance by handling items
in the PSAPPSRV transaction request queue.
PSQRYSRV
Like the PSQCKSRV server process, PSQRYSRV is designed to alleviate the workload of
PSAPPSRV. PSQRYSRV is designed to specifically handle all user-generated queries
submitted by PeopleSoft Query (PSQED.EXE). This server process is designed to improve
overall application server performance whether or not you have PSQCKSRV configured. It is
specifically, and exclusively designed to process PeopleSoft Query transactions, which can be
very SQL intensive.
PSSAMSRV
It processes conversational SQL transactions primarily for Application Designer.
Public Company
A company that has held an initial public offering and whose shares are traded on a stock
exchange or in the over-the-counter market. Public companies are subject to periodic filing
and other obligations under the federal securities laws.
Public Views
Coordinator-defined views, available to anyone using the application. For more information,
see Budget Views.
Publish/Subscribe
Publish/Subscribe type messaging is performed with PeopleTools Application Messaging
technology. You can send data from one PeopleSoft system to another in an asynchronous
mode—meaning the two systems don’t have to be sending and receiving at the same time.
This is possible because the message transfer is accomplished through a Web server with an
“http: gateway.”
Pull List
Similar to a pick list, a pull list contains multiple replenishment requests, including the
location, quantity, and item quantity required in a specific sorting sequence. You use pull lists
in PeopleSoft Flow Production with Inventory replenishment.
Pull Ticket
A document containing the details of a single request replenishment request, including Kanban
ID, item, quantity, source, and To locations. You use pull tickets in PeopleSoft Flow
Production with Inventory replenishment.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
161
GLOSSARY
Punch
Precise instances of date and time recorded for a user and measured in seconds, minutes,
hours, day, month and year and time zone (see Time Reporting)
Punch Duration
Length of time between two punches in increments of hours or partial hours (see Time
Reporting)
Punch Matching
Area of the application which converts paired punches to punch duration by processing
rounding rules and assigning the tasks to the appropriate logical day based on rules established
by the user
Punch Restriction
The facility to constrain a time reporter’s ability to create a punch that deviates from the
schedule (see Time Reporting)
Punch Type
A user defined classification of punches, i.e. In, Out, Start, Stop (see Time Reporting)
Purchase
The issuance or purchase of shares through a stock purchase program. The purchase is made
using current contributions from a participant and any carry-forward remaining for the
participant from previous purchases.
Purchase Price
The discounted price paid for the shares at the end of a purchase period.
Purchase Price Variance
A PeopleSoft Payables matching feature that compares purchase order and inventory prices
for any variance in the prices.
Purge Rules
The rules that define criteria to clear data you no longer need from previous open enrollment
processing cycles in PeopleSoft Benefits Administration.
Pyramiding
A computer calculation enabling an individual owner of one share of stock to use the stockswap technique to exercise a stock option of any size without using cash. Not many
corporations permit pyramiding.
GLOSSARY
162
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Q
QDRO
See Qualified Domestic Relations Order.
QDRO Alternate Payee
A former spouse who is entitled to a portion of a participant’s pension benefits as a result of a
court order.
QJSA (Qualified Joint and Survivor Annuity)
A post-retirement death benefit for a spouse. Plans subject to this requirement must provide
an annuity for the life of the participant with a survivor annuity for the life of the participant’s
spouse.
QMCSO (Qualified Medical Child Support Order)
A QMCSO is a court order that requires a group health care plan to provide benefits to the
child of a participant as part of a child support arrangement on the behalf of that participant.
Base Benefits enables the tracking of QMCSOs for dependents.
Qualified Domestic Relations Order (QDRO)
A court order ordering a division of a participant’s pension benefits. This is normally the
result of a divorce and gives a portion of the pension benefits to the former spouse.
Qualified Plan
A pension plan for which the employer can take tax deductions for contributions to the plan.
Investment income of the plan trust fund is not taxable to the employer. Tax law places
restrictions on the plan rules.
Qualifying Dispositions
A transaction whereby a participant sells shares acquired through a stock purchase plan two
years after the grant date and one year after the purchase date.
Quality Function
A level of configuration that enables you to define the fields and attendant information that
provides a base level for inspection plan and integration. Quality functions enable you to map
process-specific field information into PeopleSoft Quality for identification, tracking, and
analysis.
Quality Ranking Factors
Knowledge, skills, and abilities that could be expected to enhance significantly performance in
a position, but are not essential for satisfactory performance. Applicants who possess such
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
163
GLOSSARY
KSAs may be ranked above those who do not, but no one may be rated ineligible solely for
failure to possess such KSAs.
Quality Server
A PeopleTools-based analysis and graphing program.
Quality Step Increase (QSI)
A step increase awarded to an employee for sustained high quality performance.
Quantity Allocation Method
In PeopleSoft Inventory, the method used to determine how available quantity will be
allocated to prioritized demand lines when using the online reservations page.
Quantity Precision Rules
A set of rules specifying whether item quantities for a given unit of measure are expressed as
whole numbers or as decimals. Quantity precision is set at the inventory SetID and itemUOM levels.
Query
A set of data members that are selected from a Class catalog (provided by the Business
Interlink Plug-in) as well as a generic form of Criteria. The criteria are composed of <lefthand-side> <Relational Operator> <right-hand-side> statements that can be concatenated
using a set of logical operators. All operators and class catalogs are dynamically provided
through the Business Interlink Plug-in.
R
Race And National Origin Code
A code that identifies the employee's basic racial and national origin category.
Range of Dates Reporting
A Time and Labor process that enables you to report a start and stop date, a time reporting
code and task information for a single employee. The system transforms the information into
instances of daily time based on the employee’s schedule or default work schedule, replacing
the scheduled time with the entered Time Reporting code and the number of scheduled hours
on a day-to-day basis.
Range Penetration
In PeopleSoft Workforce Analytics, Range Penetration is the degree to which an employee’s
actual pay has progressed through their salary grade, and is expressed as a percentage. The
calculation is:
GLOSSARY
164
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Range penetration = (Employee Base Pay – Range Minimum)/(Range Maximum – Range
Minimum).
Range Width
In PeopleSoft Workforce Analytics, the difference between the maximum and the minimum
values of the pay range calculated using the following formula (and expressed as a
percentage):
(Maximum – Minimum)/Minimum.
Rapid Time Entry
The process that enables you to enter daily time for single employees without the system
editing your field entries. The system populates temporary tables, which are used by a batch
process that reads, edits and moves the data into the appropriate time and labor tables. You
cannot prompt for valid values in any of the fields, and the online system does not edit any of
the data you enter against other tables.
Rate Code
Alphanumeric reference to the cost per hour or unit of time reported to a specific TRC.
Rate Code [Global Payroll]
IDs for pay components. Rate codes define rates of pay and are set up in the Comp Rate Code
table. Rate codes are then used to represent pay components in pages and when you configure
compensation packages in the compensation record.
Rate Code Group
A rate code group is a number of pay components (represented by rate codes) bundled into a
subset of a compensation package. The rate code group is used to calculate percentage-based
components that do not apply the percentage to all pay components in the compensation
package. Rate code groups are constructed on the Rate Code Groups page.
Rate Code Type
Defines how the monetary value of the rate code is calculated. The compensation rate code
type is defined on the Comp Rate Code table. Valid values are Flat Amount, Hourly Rate +
Flat Amount, Hourly Rate, Percent, and Points.
Rate Combinations
The combination of rate types and conversion rates with account types that is linked to your
budgeting model. Typical rate types are current, commercial, floating, average, and historical.
Effective dates define different rates for different budget periods. There are several
conversion rates for any pair of currencies including not only the current rate, but others rates
such as average, historical, asking, and so on. These different types of rates are appropriate
for different types of accounts.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
165
GLOSSARY
Rates
The arrays of values used to calculate the cost of a plan to an employee. Rates can be agegraded, service-related, or general, depending upon the benefit plan type. Any number of
benefit program and benefit plan combinations can use each set of rates.
In Enterprise Performance Management, a rate is determined by the user and specifies the
dollar amounts to be calculated for each model. This is a financial services industry term.
Rating Model
The scale used by your company to measure competency proficiency. The default rating
model is the PSCM (PeopleSoft Competency Management) Rating Model that PeopleSoft
delivers with your PeopleSoft Human Resources System.
Raw Punches
See Actual Punch; typically this is distinguished from a rounded punch (see Time Reporting)
Reason Code
Reason Codes provide explanations for occurrences such as returned stock and changes to
order headers, lines, or schedules.
Reason Code
A code describing employee time such as comments for sick time or travel time.
Reasonableness
In PeopleSoft Demand Planning, a technique that checks the trend and projected annual
growth to make sure that a forecast is realistic. If a forecast falls outside either boundary, the
system automatically adjusts it and sends a warning message.
Reassignment
Change of an employee from one position to another without promotion or change to lower
grade.
Recalculate Forecast
In PeopleSoft Demand Planning, a forecasting feature that uses the existing model and its
associated parameters to create a new forecast.
Recalculate VAT at Payment
Allows the VAT amount to be adjusted at the time of payment if an early payment discount is
taken. This calculation option is only valid when VAT is calculated at Gross.
GLOSSARY
166
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Receipt Cost Method
Determines how you cost receipts. Receipt cost methods include Actual, Non-Cost, and
Standard.
Receipt Line
A line associated with a Receipt ID that identifies an item and quantity. If the respective
tracking is activated, the lot, lot suffix, and serial number are also identified.
Receivable Update
See Posting
Receivables Item
An individual receivable. An item can be an invoice, credit memo, or debit memo. Items and
payments combined comprise a customer's balance.
Reconciliation
Within PeopleSoft Enterprise Performance Management, reconciliation differs slightly when it
is performed within the PeopleSoft Enterprise Warehouse and when it is performed within the
PeopleSoft Analytic Applications.
In PeopleSoft Funds Transfer Pricing (FTP) and PeopleSoft Risk Weighted Capital (RWC),
reconciliation identifies differences between Performance Ledger balances and the instrument
or position balances, which are risk weighted according to the basis rules you have assigned.
The first step in reconciling basis rule balances is to reconcile the individual balances for
accounts, instruments, and positions. Reconciling the total balances is the second step. This
means that you reconcile the difference between Account/Instrument balances, and the
difference between Account/Position balances.
In the PeopleSoft Enterprise Warehouse, reconciliation is a period-end process that posts
journal entries to the Performance Ledger for the discrepancies found when you reconciled the
individual balances. Typically, you’ll run the PF Reconciliation engine after a period to
compare “to and from amounts” between tables such as REVENUE_F00 and PF_LEDGER,
or the GL_LEDGER and the PF-LEDGER.
Record Date
The date a stockholder must officially own shares in order to vote at the meeting or to derive
an adjustment resulting from a stock split or a stock dividend. The Board of Directors sets the
Record Date.
Record Definition
A logical grouping of data elements.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
167
GLOSSARY
Record field
Once a field is inserted into a record definition it becomes known as a Record Field within the
record.
Record Group
A set of logically and functionally related control tables and views. Record groups exist for
two basic reasons:
•
To save you time—with Record Groups, TableSet sharing can be accomplished
quickly and easily, eliminating an enormous amount of redundant data entry
•
To act as a safety net—Record Groups ensure that that TableSet sharing is applied
consistently across all related tables and views in your system.
Record Input VAT Flag
Within PeopleSoft Purchasing, Payables, and General Ledger, this flag indicates that you are
recording input VAT on the transaction. This flag, in conjunction with the Record Output
VAT Flag, is used to determine the accounting entries created for a transaction and to
determine how a transaction is reported on the VAT return. For all cases within Purchasing
and Payables where VAT information is being tracked on a transaction, this flag is always set
to Yes. This flag is not used in Order Management, Billing, or Receivables, where it is
assumed that you are always recording only output VAT, or in Employee Expenses, where it
is assumed that you are always recording only input VAT.
Record Output VAT Flag
For certain transactions within PeopleSoft Purchasing, Payables, and General Ledger, it may
be necessary to record both input VAT and output VAT on the same transaction. Generally,
this would be a situation where the purchaser was required to self-assess VAT. Within these
situations, this flag indicates that you are recording output VAT on the transaction. This flag,
in conjunction with the Record Input VAT Flag, is used to determine the accounting entries
created for a transaction and to determine how a transaction is reported on the VAT return.
This flag is not used in Order Management, Billing, or Receivables, where it is assumed that
you are always recording only output VAT, or in Employee Expenses, where it is assumed
that you are always recording only input VAT.
Record Owner
The "Stockholder of Record" of the stock. This may be different from the "Beneficial Owner"
of the stock.
Record Suites
Record suites are temporary tables that enable the system to track how many processes are
running. These temporary tables leave the fact tables accessible for processing other jobs
simultaneously without impacting your processing.
GLOSSARY
168
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Reduction In Force (RIF)
Method used to reduce the number of government workers in an agency.
Reemployed Annuitant
An employee who has retired from Federal employment and is receiving an annuity. His/her
salary is reduced by the amount of the annuity.
Reference Designators
A user-defined alphanumeric identifier that determines where a component is placed in an
assembly.
Reference Transaction
In People Soft commitment control, a reference transaction is a source transaction that is
referenced by a higher-level (and usually later) source transaction, in order to automatically
reverse all or part of the referenced transaction’s budget-checked amount. This avoids
duplicate postings during the sequential entry of the transaction at different commitment
levels. For example, the amount of an encumbrance transaction (such as a purchase order)
will, when checked and recorded against a budget, cause the system to concurrently reference
and relieve all or part of the amount of a corresponding pre-encumbrance transaction, such as
a purchase requisition.
Referential Integrity
Issues that occur when an update to an instance of one object invalidates one or more
instances in a related object. In other words, when you make a change to one area of the
application, referential integrity makes sure the changes do not adversely affect another area
of the application.
Refresh Time
The process that retrieves the appropriate current version of objects related to employee time
(such as task profiles or work schedules) and associates them with that time.
Region Codes
Regions may or may not be physical entities, they may simply be another way to
geographically categorize an area. When a region does represent a physical entity, the region
code has the same characteristics as a business, that is, an address and a language spoken.
Register of Separations and Transfers (ROST)
The ROST is a regulatory compliance document used by federal agencies to summarize the
information in an employee's Individual Retirement Record (IRR). The ROST is a one-page
cover sheet that accompanies a batch of IRRs being submitted to the Office of Personnel
Management (OPM) at the time of an employee's separation from a federal agency.
Employees covered by the CSRS retirement plan require SF-2807. Employees covered by the
FERS retirement plan require SF-3103.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
169
GLOSSARY
Registration
The name or names that appear on the stock certificate to indicate who owns the stock.
Registration Statement
The document that must be filed to permit registration of an issue of securities under the
Securities Act of 1933. A major component of the registration statement is the prospectus that
is to be supplied to prospective purchasers of securities.
Regression Analysis
A statistical technique that determines the relationship between two or more variables.
Regression predicts the value of one variable (the dependent variable) based on one or more
independent variables.
Regular Base Compensation
In PeopleSoft Workforce Analytics, the annualized, quoted, compensation rate for a job.
Consists of fixed compensation, does not include variable compensation.
Regular Time
An employee's normal (scheduled/shift) work hours.
Regular Time
In PeopleSoft Workforce Analytics, an employee's normal (scheduled/shift) work hours.
Regulation T
Federal Reserve Board regulations governing the extension of credit by brokers or dealers,
including their participation in same-day sale transactions and sell to cover exercise.
Regulatory Region
The Regulatory Region functionality in PeopleSoft HRMS is designed for use in performing
regulatory and regional edits. You’ll use Regulatory Region to drive PeopleCode edits,
perform set processing, and control what codes and values the operator sees. A Regulatory
Region can be any country (or province or state) where there are specific laws and regulations
addressed by functionality in PeopleSoft HRMS.
In Enterprise Performance Management, a Regulatory Region is a region with a common
regulatory framework; such as a country (CAN for Canada), or a smaller state or provincial
entity (CANBC for British Columbia).
Related Education
Education above the high school level that has equipped the applicant with the KSAs to
perform successfully the duties of the position being filled. Education may relate to the duties
of a specific position of to the occupation, but must be appropriate for the position being
filled.
GLOSSARY
170
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Release
An industry standard term associated with the lifting of a company’s Repurchase Option from
a portion or all shares from a Restricted Stock Award (RSA). RSA’s are subject to release
schedules, similar to vesting schedules.
Relevant Constraint
A constraint PeopleSoft Planning considers when it calculates a score and when it optimizes
the schedule. See also Scorecard and Optimize.
Reloads
Some stock option plans provide for the grant of a “reload” stock option in connection with
stock option exercises, typically by means of stock swaps. A reload option feature provides
that upon a stock exercise, the employee will receive an automatic grant of a new stock option
at the then-current fair market for the shares that they exercised or for the shares that they used
to swap.
Remark Codes
Codes that cause the printing of pre-set text passages on a notice of action form. Some
passages are general purpose and others are specific to the personnel action being processed.
Remit From Customer
A customer who is responsible for payments billed to other customers. During cash
application, it's useful to look at open items for the Remit From group.
Remittance Worksheet
A work space in PeopleSoft Receivables used to select drafts for remittance to the bank.
Reorder Point
The identifier that automatically locates a replenishment need for an inventory item. When
the physical quantity in a location falls below the reorder point, a replenishment request can be
created.
Reorder Point Policy
In PeopleSoft Inventory Planning, a policy that determines when a replenishment order is
launched for an item. The policy has several methods that include days supply, lead time
demand, and Fixed Quantity.
Replacement Option
The “new” “replacement” stock option that will replace the original stock option. This option
will have a grant price lower than the original stock option.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
171
GLOSSARY
Replenish
A process that indicates when items need to be resupplied from external sources. In
PeopleSoft Inventory, the process can occur on an ad hoc basis or at predefined reorder points.
Replenishment Request
In PeopleSoft Flow Production, an online request for material made when the material is
needed. You can generate replenishment requests manually or automatically using
backflushing. You can communicate that request using pull lists, pull tickets, or Workflow
notifications.
Report Scope
A feature that creates multiple instances of an nVision report using a single report request.
Each instance contains data specific to an individual ChartField, such as a business unit or
department, or for a group of ChartFields, such as all sales departments. Using Scope, each
report instance can share the same layout while containing data unique to these particular
ChartFields.
Reported Time
Clock time or elapsed time provided to the system by the user (see Time Reporting)
Reporting Person
An insider that is regularly considered by the SEC to have material information and policymaking authority for the corporation. These individuals are subject to the reporting
requirements promulgated by Section 16 of the Securities Exchange Act of 1934. Reporting
Persons typically include Directors, Officers, and shareholders with 10% holding interest in
the equity of the registrant’s securities.
Repricing
An agreement between the corporation and the optionee that allows the optionee to cancel an
outstanding high-priced, usually "Out-of-the-Money" stock options for lower-priced options.
Repricing Election
Eligible optionees can choose (elect) to accept the corporation’s repricing offer or choose to
decline the offer.
Repurchase
The reacquisition of shares of stock from an individual by a corporation. This usually occurs
when an individual fails to meet the vesting requirements on a RSA or option that is exercised
before it vested. The corporation might pay the original cost of the shares to the individual or
the fair market value of the shares at the time of repurchase.
GLOSSARY
172
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Repurchase Option
An irrevocable, exclusive option to repurchase up to the number of shares that constitute
Unreleased Shares at the original purchase price per share. The Company shall exercise said
option. The repurchase of outstanding shares is regulated under the laws of all states (except
Massachusetts). Under some laws, as under the Model Business Corporation Act, the
repurchase is prohibited unless the corporation remains solvent, in both the equitable and
bankruptcy senses of insolvency and after taking any liquidation preferences of other
outstanding stock into account.
Repurchase Right
A company's contractual right to buy back from an employee any stock resulting from the
exercise of the option. The buy back can be at fair market value, book value, or the original
purchase price.
Reservation Method
The method used to reserve soft reservation items — either batch COBOL reservations or online allocation and reservation.
Reserved
A flag indicating that the inventory item is reserved for stock fulfillment in the inventory
business unit.
Reserved Orders
Orders that have been reserved against on-hand available quantity at the business unit-item
level. Reserved orders are found in the DEMAND_INV table.
Reset
In PeopleSoft Demand Planning, a function of the Forecast Calculation Process that
determines which forecast model will produce the best forecast, meaning the model with the
lowest ratio of error.
Resolution
An activity that closes or partially closes a deduction, such as matching it to a deduction
authorization, writing it off, or sending it back to PeopleSoft Receivables.
Resolution Entry Type
Code that identifies how to process activities for items in PeopleSoft Deduction Management
and how to create accounting entries.
Resolution Method
A set of rules that defines how to automatically match or write-off deductions in PeopleSoft
Deduction Management.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
173
GLOSSARY
Resolution Worksheet
The workspace in which deduction items are paired with offset items and resolved or written
off in PeopleSoft Deduction Management.
Resource
In PeopleSoft Manufacturing, any crews, machines, and tools that can optionally be used at
work centers to complete tasks. In PeopleSoft Performance Measurement, any homogeneous
grouping of general ledger line items.
Resources
Resources are the economic elements that are required to perform the activities associated
with your business. Resources are consumed in the performance of these activities, and thus
denote operating costs. In PeopleSoft Activity-Based Management, resources are typically
regarded as the groupings of one or more general ledger accounts. In a service business,
resources might include salaries, office rentals, and costs of capital such as information
systems, depreciation, real estate taxes, and other associated costs.
Resource Amount
The monetary amount of a single, specific resource transaction. The Resource Amount maps
to the Posted Total Amount when posted to the general ledger.
Resource Category
A field for defining individual resource types more specifically. For example, if you have a
resource type of labor but want to break it down further for tracking purposes, you might
define resource categories of architect hours, carpenter hours, plumber hours, and electrician
hours. Resource categories are optional.
Resource Driver
In Activity-Based Management, a Resource Driver defines the quantity of resources used by
an activity.
Resource Group
A category of resource types. You can define relationships between the resource types within
a resource group to facilitate analysis of project costs. For example, if you had resource types
for standard labor and overtime labor, you could group them together in a resource group to
calculate total labor.
Resource Planning
In PeopleSoft Activity-Based Management, Resource Planning focuses on resources
allocations that create expected results like driver rates and cost object costs.
GLOSSARY
174
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Resource Quantity
A field on each resource transaction that identifies nonmonetary quantity. For example, on a
resource line for 12 ball valves the quantity would be 12.
Resource Source
A field on each resource transaction that identifies the system in which the cost originated.
For example, PeopleSoft Payables would be the resource source for a resource transaction
created from a voucher in that system.
Resource Subcategory
A field for defining individual resource types and categories more specifically. For example,
if you have a resource type of labor, and resource categories of architect hours, carpenter
hours, and plumber hours, you might want resource subcategories of regular hours and
overtime hours. Resource subcategories are optional.
Resource Supplied
An attribute that enables you define a resource as committed or flexible. A committed
resource is one that will not likely change in the short term. A flexible resource is more likely
to change within the short term.
Resource Transaction
An individual cost line within PeopleSoft Projects. It is through resource transactions that
individual costs and types of costs are tracked. Each resource transaction contains a cost and a
quantity and as many identifiers of that cost as necessary. Resource transactions are created
when you receive information from other systems, run allocations with project resources as
the target, or perform internal transactions such as billing, project closure, or adjustments.
Resource Type
The resource transaction field in PeopleSoft Projects that identifies the resource associated
with a given cost. Resource types may be very general or very specific depending on your
needs; they are used in conjunction with resource categories, resource subcategories, and
resource groups.
Resource Use
Resource Use defines the behavior of a resource within PeopleSoft Enterprise Performance
Management. An intermediate resource is a grouping of general ledger line items that may be
allocated to another intermediate resource or to a primary resource.
Restricted Punch
A punch which is not accepted because it occurs outside of the predefined number of hours
and minutes before or after a scheduled (Understanding Time Collecting Device)
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
175
GLOSSARY
Restricted Securities
Securities issued privately by the company, without the benefit of a registration statement.
Restricted securities are subject to a holding period before they can be sold under Rule 144.
Restricted Stock Awards (RSA)
An award of shares of stock to an individual, typically granted at the par value or for no
consideration. The shares are awarded on the basis of some future performance goal, either
the passage of time (vesting) or the attainment of a specific goal. When the goal is achieved,
the vesting occurs. The individual, typically, has all other shareholder rights over these shares
such as, voting and dividend rights. The shares are issued in the name of the individual at the
time of the award and are held in escrow until vesting occurs. If an employee terminates prior
to the vesting of the shares then the company normally repurchases the unvested shares.
Retained Grade Effective Date
Date employee became eligible or began receiving a retained grade and pay.
Retained Grade Expiration Date
Expiration date of an employee's retained grade and pay.
Retest Date
In PeopleSoft Inventory, the date a lot should be inspected to determine whether it is still
acceptable for fulfillment or consumption. (Retest Date = Creation Date + Retest Lead Time)
Retirement
Types of retirement are:
•
Mandatory Retirement.
•
Disability Retirement.
•
Voluntary Retirement.
•
Special Option Retirement.
•
ILIA (In Lieu of Involuntary Action) Retirement.
Retirement Coverage Code
A code used to denote an employee's retirement coverage. The major ones include the
following:
GLOSSARY
•
Civil Service (CSRS)
•
Federal Employees Retirement System (FERS) and FICA
•
Foreign Service (FS)
176
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
•
CSRS Offset
•
CSRS - Special (for LEOs)
•
FERS and FICA - Special (for LEOs)
•
Social Security System
•
None
Retroactive Benefits/Deductions
Deductions taken or benefits granted due to a recalculation of previous benefits and
deductions. Late or modified union contracts, late paperwork, and delays in benefit
enrollment processing may all result in a need for benefit/deduction recalculation.
Return Type Code
A designator on returned material authorizations (RMAs) that indicates what actions the return
initiates. This may include replacement of the product or the creation of a credit memo in
PeopleSoft Billing.
Reverse Split
A reduction in the number of outstanding shares of a corporation’s stock, with a corresponding
increase in the stock’s value.
Reversionary Annuity
A form of pension payment where the retiree foregoes all benefit during his or her lifetime so
that the entire benefit is paid as an annuity to a beneficiary after the retiree’s death. If the
beneficiary predeceases the retiree, the benefit is forfeited.
RIDDOR (Reporting of Injuries, Diseases, and Dangerous Occurrences Regulations)
Health and safety regulations in the United Kingdom requiring employers to report certain
types of health and safety incidents to the Health and Safety Executive (HSE).
Rider
A special court-ordered or regulatory provision that may be applied to an enrollment to
expand or limit any dependent or beneficiary coverage.
Risk Function
In Risk Weighted Capital, this is a user-defined formula that the system uses to derive risk
weights.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
177
GLOSSARY
Risk RuleSet
Used to assign a number of rules to a basis, for processing by the PeopleSoft Risk Weighted
Capital Application. Used to group together a number of rules that frequently apply to the
same type of balance.
Risk Type
In Risk Weighted Capital, this defines the types of risk associated with your business or
activity. For example catastrophic, credit, legal, operational, regulatory, foreign exchange,
market, interest rate.
Risk Weight
In Risk Weighted Capital, the risk weight is assigned by risk type, and is used to calculate
capital allocation or normalized loss for the account or activity.
Risk Weighted Capital (RWC)
See PeopleSoft Risk Weighted Capital
RIZIV Code
This code is for Belgian employers to track the Federal Institute for Illness and Disability
Insurance category.
ROE (Record of Employment) Reason Codes
ROE codes are defined by the Canadian government for employers to record employment
actions such as Return to School or Pregnancy Leave.
ROLAP (Relational Online Analytical Processing)
ROLAP refers to the analytical processing and analysis of a relational Data Mart cube.
ROLAP, is a form of OLAP that leverages the power and flexibility of relational databases.
Role
A role consists of a designated set of tasks, competencies and accomplishments required for a
job code or a position.
Role user
A PeopleSoft Workflow user. A person's Role User ID serves much the same purpose as their
Operator ID does in other parts of the system. It allows the system to uniquely identify the
user and to determine what data the user has access to.
PeopleSoft Workflow uses Role User IDs rather than Operator IDs because it needs different
kinds of user information than the rest of the system does. Specifically, it needs to know how
to route work items to the user---an email address, for example---and what role the user plays
in the workflow. Plus, you can include role users in your workflow who aren't PeopleSoft
application users and who don't have Operator IDs.
GLOSSARY
178
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Roles
Roles describe how people fit into the workflow. A role is a class of users who perform the
same type of work, such as clerks or managers. Your business rules typically specify what
user role needs to do an activity.
Roll Forward
In commitment control, rolling budget balances forward from the budget ledger you are
closing (the source budget ledger) into the new (target) budget ledger.
In PeopleSoft Enterprise Planning and Production Planning, a utility that moves tasks from the
past to a valid point in the future using time periods rather than fixed dates.
Roll Up
The act of totaling sums based on information tree hierarchies. You can roll up data for any
group of details that you have defined as dependent with the Tree Manager.
Rolling Plan
An ESPP offering period where the purchase date is measured from the offer start date. If at
the purchase date, the current stock price is lower than the last stock purchase price, you may
elect to reset your employees to the new lower purchase price. The offering period is now
based of the new purchase date.
Rollup
In PeopleSoft Demand Planning, the process of adding up the demand and forecast Array
from one level to the next from child to parent. Information such as caption, description, and
unit of measure can also be rolled up. The process is also referred to as summarization.
Rounded Punch
A punch that has a company’s rounding requirements applied to it (see Time Administration)
Rounding Rule
Defines a rounding rule. You use rounding rules in numerous places—for instance you could
round an earning, deduction, or many of the elements that make up an earning or deduction.
Routing (Manufacturing and Engineering)
A set of information detailing the method to manufacture a particular item. It consists of
sequentially numbered operations that reference the task to be performed, the work center in
which the task is to be performed, the resources to be used, and the time required to complete
the task. Engineering Routings differ from Manufacturing Routings in that they are not
visible within Production Planning or Production Management and are isolated from
Manufacturing.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
179
GLOSSARY
Routing Option
In PeopleSoft Planning, a valid method for replenishing supply for an item. There are two
types of routing options: build options and purchase options. An item may have more than
one routing option.
Routing Transit Number (RTN)
A number that identifies the financial institution to which an electronic payment should be
sent for deposit.
Routings
Routings connect the activities in the workflow. They are the system's means of moving
information from one place to another, from one step to the next. Routings specify where the
information goes and what form it takes—email message, electronic form, or worklist entry.
RSZ (Rijksdienst Sociale Zekerheid) Category Codes
These government defined Social Insurance category codes are used to maintain social
security records for your Belgian employees. RSZ Categories are associated with a Contract
Type, Statute and Substitute for Claeys Formula calculations.
Rule
Representation of a company’s compensation, task allocation, or exception requirements (see
Creating Rule)
Rule 10b-5
A SEC rule that prohibits trading by insiders on material non-public information. This is also
the rule under which a company may be sued for false or misleading disclosure.
Rule 144
A SEC rule that applies to public re-sales of restricted securities as well as all sales by
affiliates. The requirements include (1) current public information about the issuer, (2) a oneyear holding period for "Restricted Securities," (3) unsolicited brokers' transactions, (4) an
amount limitation. the greater of 1% of the outstanding stock or the average weekly trading
volume may be sold during any three-month period, and (5) a Form 144 filing.
Rule Actions
Functions that can be used in the creation and application of a rule (see Time Administration)
Rule Elements
Customer defined pieces of information which are passed to Time Administration in order to
apply and evaluate rules (see Time Administration)
GLOSSARY
180
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Rule Period
A Time & Labor period used in the evaluation and application of a rule (see Time
Administration).
Rule Program
Specifies the set of rules the Time Administration process will execute and the order in which
it will execute the rules.
Rule Results
Net effect of the application of a rule; for instance, the creation of time, initiation of workflow,
modification of reported tasks (see Time Administration)
Rule Templates
Templates used to quickly create a variety of rules for the Time Administration program to
execute when processing reported and/or scheduled time. Some examples are. compensation
rules for overtime and holidays, notification rules for irregular attendance, and rules for just
about any other time-reporting situation that requires special processing.
Rules
Rules are your company's business practices captured in software. Rules determine what
activities are required to process your business data.
Rule Set
Rule Sets enable you to apply basis rules to your PeopleSoft Analytic Application in the
sequence that you prefer. This is particularly helpful if there are multiple basis rules for the
same account node, product node, or position source code. Rule Sets can control the
execution sequence of your rule combinations, filter combinations, or both. The first
occurrence on the node will be applied and any other occurrence will be ignored. Rule Sets
are also used with the Data Manager, and with the Currency Conversion engine.
Rules/Time Administration
A physical implementation or execution of a company’s compensation, exception and task
rules (see Time Administration)
Run Control
A run control is a type of online page that is used to begin a process, such as the batch
processing of a payroll run. Run control pages generally start some type of program that
manipulates data in some way.
Run Control ID
A unique ID to associate each operator with their own run control table entries. Process
Scheduler.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
181
GLOSSARY
Run ID
Code that uniquely identifies a Run Control for batch processes.
RWC (Risk Weighted Capital)
See PeopleSoft Risk Weighted Capital
S
Safety Stock Policy
In PeopleSoft Inventory Planning, a policy that determines how safety stock quantities are
calculated for an item. The policy has several methods that include days supply and
percentage of demand fill.
Salary
Rate of compensation received by an employee.
Salary Group
Part of a group of defaults assigned to job codes. A salary group may include items such as
steps and grades dependent on individual company parameters.
Salary Plan
A plan of salary defaults, grades, and step components
Salary Step Components
Pay components assigned to a salary step by entering the corresponding rate codes on the
Salary Step Components page.
Salvage Value
An estimate of the amount of money one might receive upon selling an asset once that asset
reaches its useful life. Salvage value is used in several depreciation calculations, including
Straight Line.
Sales Order Rebate and Penalties
Rebates or penalties that are calculated against sales orders independent of Buying
Agreement.
Sales Person
A required field used in PeopleSoft Receivables, Billing, Order Management, and Deduction
Management when working with items. Each item must be assigned to a credit analyst. If no
GLOSSARY
182
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
credit analyst is assigned to an item, the credit analyst assigned to the customer is used as the
default.
Sales UOM
The only units of measure that can be referenced on sales orders and quotes. You establish
them on the Product Attributes by UOM page.
Same-Day Sale
An exercise and sale occurring on the same day. The exercise of the option and sale of the
underlying shares take place simultaneously. The broker uses the proceeds of the sale to pay
the company the exercise price and any tax withholding and the optionee the net cash (less any
brokerage commission/fees).
Sample Method
One method of entering characteristic readings for a quality control plan. Using this method,
for one given control plan you inspect all the characteristics for the first sample, then all the
characteristics for the next sample and so on.
Scale
On a Goals Matrix (In PeopleSoft Workforce Analytics), a scale that defines the lowest,
middle, and highest levels of performance needed to achieve associated minimum, midpoint,
and maximum levels of compensation pay out. These are referred to as the Threshold, Target,
and Stretch levels, respectively. The scale can be used to standardize multiple performance
goals to a common scale of measurement.
Scenario
A scenario is a particular outcome you are analyzing when you run in Scenario Manager.
Scenarios enable you to study various changes in organization models you created. For each
parent and child model you want to study, you create a scenario ID that you use with all run
controls.
There are two types of scenarios defined in the Scenario Manager: Historical and Forecast. In
the case of an Historical Scenario all future looking fields will be display only and the
Scenario Manager component serves as a wrapper to run any analytic engines. In the case of a
Forecast Scenario, the Scenario Manager refers to all the business rules, forecasts, and
economic assumptions that make up the scenario.
In PeopleSoft Budgeting a scenario is a ChartField used in PeopleSoft Budgeting to identify
different budget iterations that use different assumptions.
Schedule
Specific task, date, and time to be worked by a Time Reporter (see Scheduling)
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
183
GLOSSARY
Schedule 13D or 13G
Disclosure forms required to be filed with the SEC and the company by a shareholder (or
shareholders) that own(s) more than 5% of a public company. Schedule 13G is a short-form
version of the 13D and may generally (but not always) be used only by institutional investors.
Schedule Group
A category of employees or employee groups associated for purposes of time scheduling.
Schedule Line Number
The line associated with an Order ID. The schedule line identifies an item and scheduled ship
quantity that may be different from the requested quantity due to item availability.
Schedule Number
A number identifying the salary table form that an employee's pay is computed. Also has a
second meaning related to the Payment Voucher processing for the ECS.
Schedule Reconciliation
In PeopleSoft Payables, the process of reconciling scheduled payments by Payment Schedule
ID. Schedule Reconciliation helps U.S. federal agencies meet their requirement to schedule or
group together payment orders for submission to the Treasury Disbursing Office.
Schedule Template
An ordered pattern of workday(s) and/or off day(s) used in scheduling (see Scheduling)
Schedule Type
In PeopleSoft Payables, an indicator of the nature of items purchased with a Payment
Schedule.
Scheduled Punch.
A time reporter’s expected punch (see Scheduling)
Scheduling
A function of PeopleSoft Time and Labor and PeopleSoft Global Payroll that enables you to
create work schedules and assign them to employees.
Scorecard
A weighted sum of constraint violations in a schedule that evaluates the schedule's validity
(that is, acceptability). The score is calculated by adding the value for each relevant violated
constraint. See also Penalty, Weight and Relevant Constraint.
In PeopleSoft Balanced Scorecard, views of a strategy tree’s components and Key
Performance Indicators with red, yellow, or green scores that show its assessments.
GLOSSARY
184
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Scrap
Any material outside of specifications and possessing characteristics that make rework
impractical.
SearchIndex
A set of objects that give the programmer the ability to create, delete, insert, and update a
search index and the items within it. Search index items contain a set of statistics about the
document that has been indexed (keywords, number of occurrences, proximity to other words,
and so on) as well as a key that can be used to point to the document (a URL, database key, or
file path).
SearchQuery
A set of objects that allow the programmer to pass a query string and operators to the search
engine and receive a set of matching results with keys to the source documents from the
search index in return.
Seasonal Index
In PeopleSoft Demand Planning, measures the amount by which a forecasting period is
influenced by seasonal effects. The index typically measures the percentage of difference
between the base demand in the period and the expected actual demand in the period. An
index of 100 indicates an average period in a seasonal cycle.
Seasonal Profile
In PeopleSoft Demand Planning,identifies the weight index assigned to a forecast time period
to take in account seasonal fluctuations in the demand.
Seasonality Group
In PeopleSoft Demand Planning, a group of Forecast Items with a repetitive pattern of
demand from year to year where some periods are higher than others. Typically a group of
items is designated as a contributor to the seasonality group. Contributors are chosen because
they are representative of the group, are stable, and have at least two years of demand history.
The seasonality group profile is more stable than individual profiles of the contributors
because the Aggregation process smoothes out random errors.
In Enterprise Planning and Simulation, a Seasonality group is a group of items with similar
seasonal patterns. To determine if a forecast element is seasonal or nonseasonal, by averaging
their history values over a year and determining where they were above and below average.
Seasonality groups capture means seasonal behavior among related products.
Secondary COBRA Events
COBRA qualifying events that extend the amount of time a participant is eligible for COBRA
coverage. For an event to qualify as a secondary COBRA event, it must fulfill the following
qualifications: The participant must already be enrolled in COBRA coverage as a result of an
initial COBRA event, the initial COBRA event must be one that is associated with a change to
the employee’s job status (such as a reduction in hours, termination, or retirement), and the
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
185
GLOSSARY
secondary event must be one of the COBRA event classifications that involves loss of
coverage for the dependent (such as divorce, marriage of dependent, or death of employee).
See COBRA and Initial COBRA Events.
Secondary event code
Secondary event codes, also called transaction codes, specify the type of transaction in detail.
For example, a transaction's secondary event code could say that the transaction is a catalog
order, a rush order, or a request for a sample. Not all transaction types include secondary event
codes.
Section
A set of logically related elements that are to be resolved during the payroll process. You
define your payroll process by creating sections and adding them to process lists. You can
create four different types of sections: standard, generate positive input, sub-process, and
payee.
Section 16(a)
Provision of the Securities Exchange Act of 1934 that requires company insiders to file
changes in beneficial ownership of the company’s equity securities and periodic reports
disclosing their holdings.
Section 16(b)
Provision of the Securities Exchange Act of 1934 that requires that any profit realized by a
company insider from the purchase and sale, or sale and purchase, of the company’s equity
securities within a period of less than six months must be returned to the company. It is also
known as the "short-swing profit" rule.
Section 423
The Internal Revenue Code section that regulates Employee Stock Purchase Plans.
Section 83(b) Election
A tax filing within 30 days of grant that allows employees granted restricted stock to pay taxes
on the exercise date, rather than the date when restrictions lapse. If an employee files the
election, taxes are based on the fair market value on the exercise date, with any future
appreciation taxed as a capital gain. If the employee does not file an election, taxes are based
on the fair market value on the date the restrictions lapse, which will be higher assuming the
stock has appreciated in value.
Securities Act of 1933
Often referred to as the "truth in securities" law, the act requires that investors receive
financial and other significant information concerning securities being offered for public sale;
and prohibits deceit, misrepresentations, and other fraud in the sale of securities.
GLOSSARY
186
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Securities Exchange Act of 1934
The Congressional act that created the Securities and Exchange Commission. The Act
empowers the SEC with broad authority over all aspects of the securities industry. This
includes the power to register, regulate, and oversee brokerage firms, transfer agents, and
clearing agencies as well as the nation's securities self regulatory organizations (SROs). The
various stock exchanges, such as the New York Stock Exchange, and American Stock
Exchange are SROs. The National Association of Securities Dealers, which operates the
NASDAQ system, is also an SRO. The Act also identifies and prohibits certain types of
conduct in the markets and provides the Commission with disciplinary powers over regulated
entities and persons associated with them. The Act also empowers the SEC to require periodic
reporting of information by companies with publicly traded securities.
Security Clearance
Security Clearances (Classified, Secret, Top Secret) are granted to employees by government
agencies and are usually associated with jobs that bring employees into contact with classified
government projects or sensitive technologies.
Security Event
In commitment control, events that trigger security authorization checking, such as budget
entries, transfers, and adjustments; exception overrides and notifications; and inquiries.
Segmentation
You can “segment” components of pay based on such events as changes in compensation,
employee status, or job changes during a pay period. For example, if an individual changes
jobs in the middle of a pay period and your organization has a practice of separating
components earned in the first job from those earned in the second job, you can set up your
system to trigger segmentation of earnings results on the pay slip when there is a change to the
job change action/reason field.
Selective Factors
Knowledge, skills, abilities or special qualifications that are in addition to the minimum
requirements in a qualification standard, but are determined to be essential to perform the
duties and responsibilities of a particular position. Applicants who do not meet a selective
factor are ineligible for further consideration.
Selective Merge
In PeopleSoft Enterprise Warehouse the selective merge allows for an additional WHERE
clause when you delete a merge.
Self-Service Application
Another name for PeopleSoft's HRMS and ERP applications accessed using a browser.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
187
GLOSSARY
Sell to Cover Exercise
When an optionee sells a portion of the option shares to cover the exercise cost and any
applicable taxes.
Seniority Pay
A premium paid for seniority or for the length of time an employee works for an organization.
Seniority Pay Components
Pay components whose rate codes are assigned to the seniority rate code class SENPAY
(provided by PeopleSoft) on the Comp Rate Code page, allowing you to access the seniority
pay functionality.
Seniority Rate Codes
A premium paid for seniority or for the length of time an employee works for an organization.
Separate Debit and Credit
A feature in PeopleSoft General Ledger that captures and reports in greater detail the
accounting information that resides in balance sheet accounts. It shows the gross debit/credit
balances in addition to the net balance for each account stored in the ledger. This feature also
supports reversing—debit and reversing—credit journal entries for error correction.
Server Process
A server process is executable code that receives incoming client requests on the application
server. The server process carries out a client request by making calls to a service that
executes SQL against the database.
Service
A service performs a particular task of an application. Examples of services are MgrGetObj,
SQLAccess, RemoteCall, and so on. When a client workstation sends a request to the
application server, it sends a service name and a set of parameters, such as "MgrGetObject +
parameters". The application server associates the service request with the appropriate server
process to complete the transaction.
Service
The PeopleSoft Pension Administration function that determines how much service credit an
employee has accrued.
Service Buy Back
The process by which an employee repays a pension plan in order to restore service credit that
was forfeited when the employee withdrawal previous contributions. Typically, employees
withdraw contributions upon termination and initiate service buy back processing upon rehire.
GLOSSARY
188
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Service Purchase
The process by which an employee gets additional pension service credit for periods not
normally considered eligible. The employee “purchases” this service by paying into the plan.
Service Schedule
A table showing how much service an employee earns based on the number of hours the
employee worked during the year or month.
SetID
The label that identifies a TableSet.
Sex Code
Used to indicate gender.
Shape
For a transaction, the set of inputs and outputs for that transaction. For a class, the data
members of that class.
Share
A share of a company's stock. Stock options give you the option to purchase a certain number
of shares of company stock.
Share Price
The price per share of a company's stock. See, also, "stock price."
Shareholder
Owner of one or more shares of stock in a corporation. Also known as a stockholder or
investor.
Shares Available to Issue
The total number of shares authorized, less shares granted, plus cancellations that revert to the
Plan pool.
Shares Cancelled
This is usually triggered by a specific event, such as termination of employment in which the
unvested shares as of the date of termination are no longer available for future vesting and
exercise. These shares are therefore canceled from the option and can be returned to the plan,
retired to treasury or allocated back to a group.
Shares Exercisable
The number of shares that are vested and available for exercise.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
189
GLOSSARY
Shares Exercised
The number of shares purchased upon exercise of a stock option.
Shares Expired
Option shares that no longer are exercisable at the end of the option term. The length of the
option term is defined in option agreement. This date is usually the earlier of the exercise
period for vested shares after termination of employment or the full length of the option term.
Shares Outstanding
The number of company shares currently held by shareholders, as tracked by the transfer agent
Shift [Time and Labor]
The block of hours that an employee works in a day, such as nine to five, four to eleven, or ten
to six. In PeopleSoft Time and Labor, Shift is used as a template of clock hours for
scheduling an employee or group of employees to be at work or available to work (on call).
Shifts may be constant, rotating, repeating, and/or split; any given shift may or may not have
an associated Shift Differential or Bonus. A shift is always associated with a Work Schedule,
and consists of clock hour Start and Stop times (two to allow for split shifts), meal periods
(two) and relief periods (two).
In PeopleSoft Workforce Analytics, the block of hours that an employee works in a day such
as nine to five, four to eleven, or ten to six.
Shift Bonus
A fixed amount (either a flat dollar figure or stated in terms of an employee's rate) paid for
working a particular Shift.
Shift Code
A numerical shift identifier that is unique within a SetID.
Shift Differential
Additional compensation paid an employee for time worked during certain shifts. Typically,
shift differential is administered as a flat amount per shift, hour worked, and/or as a percentage
of the amount paid per shift hour or shift worked.
In PeopleSoft Workforce Analytics, a premium paid for work over regular pay, for which
employees on certain shifts may be eligible, such as double-time for late night shifts. Shift
differentials are usually stated as an additional rate or factor.
Shift Elements
Individual components of a shift such as TRC start and stop time, duration (see Scheduling)
GLOSSARY
190
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Shift Name
Customer defined nomenclature for a shift (see Scheduling)
Shift Type
A customer-defined classification associated with a shift. The shift type can be used in the
evaluation of rules or exceptions (i.e. On Call) (see Scheduling)
Shift Type [Time and Labor]
Time and Labor defined classification of shifts. Valid shift categories include Flex, General
and Elapsed. Shift categories are used in the creation of time reporter schedules (see
Scheduling)
Shipping Priority Code
Shipping Priority Codes act as tie breakers during order reservation in PeopleSoft Inventory
when different orders are scheduled for the same delivery date and time. When the
reservation process in Inventory encounters a situation where there are more orders than
available stock, the system reserves the order with the highest priority. If schedules are
encountered with the same priority, orders are then considered by order date.
Short Sale
The sale of a security that is not owned or is not delivered at the time of the trade,
necessitating its purchase or delivery some time in the future to "cover" the sale. A short sale
is usually made with the expectation that the stock value will decline, so that the short seller
can eventually cover at a price lower than the original sale, thus realizing a profit. At the time
of the short sale, the broker borrows stock to deliver on the settlement date. A short sale can
be "naked," in which case the seller does not deliver the shares being sold short and must
provide the broker with collateral. Or the short sale can be "against the box," in which case
the seller delivers the shares being sold short for the broker to hold "in the box" until the seller
chooses to close out the short position.
Short-Swing Transaction
A purchase and sale, or sale and purchase, of the issuer's equity securities by an insider within
a period of less than six months. See "Section 16(b)" above.
Short-term Variable Compensation
In PeopleSoft Workforce Analytics, this is cash compensation paid to a worker that is not
fixed; includes bonuses and commissions.
Sibling
A tree node at the same level as another node, where both roll up into the same parent. A
node can be a sibling, parent, and child all at the same time, depending on its location in the
tree.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
191
GLOSSARY
Sibling
A tree node at the same level as another node, where both roll up into the same parent. A
node can be a sibling, parent, and child all at the same time, depending on its location in the
tree.
Sibling
A tree node at the same level as another node, where both roll up into the same parent. A
node can be a sibling, parent, and child all at the same time, depending on its location in the
tree.
Sick Leave
Sick leave is accrued by full-time permanent/seasonal employees at the rate of 4 hours every
biweekly pay period; for part-time permanent/seasonal employees, it is accrued at one hour for
every 20 hours worked.
Simulated Workforce
In the PeopleSoft Workforce Rewards product, Manage Compensation module, the calculated
Simulated Workforce = Existing Employees + New Simulated Employees + ReducedEmployees.
Single Life Annuity
A benefit payable during the lifetime of the participant, with no payments made after the death
of the participant. Also referred to as a “life only annuity” or a “straight life annuity.”
Single Signon
This refers to the process by which a user can, after being authenticated by one PeopleSoft
application server, access a second PeopleSoft application server without entering a user ID or
password.
SIREN Code (SystГЁme Informatique pour le RГ©pertoire des Entreprises)
This stands for the Electronic List of Enterprises. The SIREN code is assigned to a company
when it registers as a business with the French government, and identifies the purpose of the
establishment for regulatory reporting purposes in France.
SIRET (SystГЁme Informatique pour le RГ©pertoire des Г‰tablissements)
This stands for Electronic List of Entities. In France the SIRET is an identifying number
given to a French business by the INSEE, an official statistics and economics organization in
France. The SIRET number is a combination of the SIREN and NIC numbers. This number
is used by the tax and social security authorities to identify a business enterprise and its
entities.
GLOSSARY
192
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Site Tree
In PeopleSoft eStore, a hierarchical structure that controls navigation, as well as content and
behavior within the header, footer, and left margin areas of the web page template.
Slice
The span of time into which an element is segmented as a result of element segmentation.
Unlike a segment (or period), a slice does not represent a separate gross-to-net process since it
affects only a limited set of elements within a period or segment. Like segments, slices have
their own begin and end dates.
Slice Dimension
A model dimension used to restrict user access to the system. For example, a product
manager’s access to the system can be restricted to only the products he or she is responsible
for by defining “Products” as a slice dimension, and assigning this person the members of the
“Products” dimension he or she can access.
Slice and Dice
Another term for multidimensional analysis. When your data has three (or more) dimensions,
you can think of it as being arranged in a cube (or hypercube), with each side representing a
dimension. When you analyze the data, you “slice” off part of the cube or “dice” it to get to
an individual cell.
Slotting
In PeopleSoft Workforce Rewards, a process by which the system establishes the target
market compensation rates to use for compensating workers in non-benchmark jobs.
Social Security Number
Nine numeric digits assigned to an individual by the Social Security Administration. Also
known as a Taxpayer Identification Number (TIN).
Source
The Source table stores valid journal entry and posting sources. These can include job titles
(such as CFO), user IDs (such as CLERK123), PeopleSoft General Ledger processes (such as
Consolidations), or other applications (such as PeopleSoft Payables).
Source Transaction
In commitment control, any transaction generated in a PeopleSoft or third-party application
that is integrated with commitment control, and which can be checked against commitment
control budgets. For example, a pre-encumbrance, encumbrance, expenditure, recognized
revenue or collected revenue transaction.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
193
GLOSSARY
Sparsity/Density
A multi-dimensional concept of whether data exists at intersections of dimensions. If a cube
has many dimensions, but little or no data in some of those dimensions, the cube is considered
sparse. Sparse cubes take up unnecessary disk space and reduce calculation performance.
The goal is to create dense cubes and only use dimension intersections where data actually
exists.
Special Accumulator
A device that accumulates earnings from different sources for a specific purpose. 401(k),
pension and retirement plans use special accumulators. A 401(k) plan might use a special
accumulator to calculate a deduction using regular, vacation, and overtime earnings. Special
accumulators can add to or subtract from a pool of earnings.
Special Payments
A payment that occurs once or under special circumstances (e.g., back pay interest, lump sum
leave, bond refund, longevity bonus, compensatory time reimbursement, death payment,
severance pay, separation bonus, etc.).
Special Rates
Higher salary rates for specific grade levels and occupational groups determined by OPM for
employees working in specific geographic areas. Each area is assigned a separate Schedule
Number.
Specialist
A member of a stock exchange who maintains a fair and orderly market in one or more
securities. A specialist or specialist unit performs two main functions. executing limit orders
on behalf of other exchange members for a portion of the floor broker's commission, and
buying or selling for the specialist's own account to counteract temporary imbalances in
supply and demand, preventing wide swings in stock prices.
Specialized Experience
Experience that has equipped the applicant with the particular knowledge, skills, and abilities
to perform successfully the duties of the position and is typically in or related to the work of
the position to be filled.
SpeedChart
A user-defined shorthand key designating several ChartKeys to be used for voucher entry.
Percentages can optionally be related to each ChartKey in a speedchart definition.
SpeedType
A code representing a combination of ChartField values. SpeedTypes simplify the entry of
ChartFields commonly used together.
GLOSSARY
194
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Spending Limits
See Planning Targets.
Split and Join
In PeopleSoft Demand Planning,the process of subdividing a forecast so that multiple users
can make changes to their portions of the forecast. After changes are complete, the portions
are joined back into a single forecast.
Split Deduction
Deduction that you create by splitting an existing deduction into two deduction items. The
new deduction retains the original item ID with an added suffix number.
Split Shift
Periods of productive time split up by period of non-working time; example. a time reporter
comes to work as a busboy for the lunch shift from 12-2 p.m. and then returns to work from 68 for the dinner shift (see Scheduling)
Split Stream Processing
The matching of a payment’s cash information with the payment advice information when
they have been received as separate transmissions through EDI and lockbox.
The uniting of the payment cash with the payment advice when they have been received as
separate information through EDI.
Spokesmen Committee (Sprecherausschusse)
In Germany the Spokesmen Committee represents the interest of the management in your
company before the ownership. The Spokesmen’s Committee is consultative in nature,
although they play a co-determination role on individual employment contracts, hiring, and
dismissals. They also play a role in monitoring employment fairness, equity, and nondiscrimination in terms of nationality, race, religion, sex, and age.
Spouse Demonstration J&S
In the PeopleSoft Pension Administration system, an informational-only form of pension
payment that tells what the spouse’s total benefit would have been if the retiree had chosen the
spouse as the beneficiary rather than a nonspouse beneficiary. You cannot pay pension
benefits based on this form because it is informational only.
Spouse Eligibility Alias
In PeopleSoft Pension Administration, a Custom Statement that defines any criteria that must
be met before the plan will provide an Automatic Spouse Benefit. For example, the plan may
require that the employee and spouse be married a full year before they are eligible for an
automatic spouse benefit.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
195
GLOSSARY
Spouse Eligibility Statement
See Spouse Eligibility Alias.
Spread
Depending on the context, either (1) the difference between the bid and asked prices for an
over-the-counter stock, or (2) the difference between an option’s exercise price and the market
price at the time of exercise (i.e., the profit component of the exercise).
SQL Objects
Used to create rules that are more complicated than templates or actions and conditions
allow—select statements, insert statements, table joins, and sub-queries
ST (Strategic Trust)
See Strategic Thrust
Staged Date
The date an item was received into the inventory business unit.
Staging ID
An identifier for a putaway plan. The inventory system sequentially assigns Staging IDs when
it creates the putaway plan.
Standard Cost
A predetermined, fixed cost associated with an Inventory Item or Forecast Item,
representing detailed estimates of each element of cost entering into the purchasing or
manufacturing of an item. Standard cost is used when minor variations in an item's cost are
not needed. The use of standard costs also enables management to determine how much an
item should cost (Standard), look at how much it does cost (Actual), analyze the differences
between the two and their causes (Variances), and compute economic order quantity.
Standard Form (SF)
A standardized form for interagency use by the Federal government. The SF prefix is the
most common but not exclusive one in usage.
Standard Price
In PeopleSoft Demand Planning, the standard selling price associated with a Forecast Item.
The price can be introduced into the system directly in forecast item maintenance or indirectly
using the demand transfer interface. At higher levels in the view where there is no standard
price available, the summarization function can be set up to develop one.
Standard Unit of Measure
The smallest unit of an item that a PeopleSoft application tracks.
GLOSSARY
196
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Startup Data
In PeopleSoft Pension Administration, accrued Service, Cash Balance Account, or Employee
Account data loaded into the system in the form of an opening balance and “as of” date. The
alternative would be to load the entire accrual history.
State Record
The State Record is a PeopleSoft record, keyed by process instance, that must be created and
maintained for each Application Engine program. The State Record defines the fields that an
Application Engine program uses to pass values from one SQL statement to another.
Static Group
An employee group in Time and Labor that enables you to control its creation and
maintenance. The group remains the same at all times until you change it.
Static Policy Controls
Determines how a static (versus time-phased) Inventory Policy is to be calculated. Static
controls use period and average methods and their arguments.
Statistical Account
An account that has an associated unit of measure, used for tracking and monitoring statistical
data. For example, the Workstations account uses EA (each) as a generic unit of measure,
while the Floor Space statistical account might use square feet and the Work Days account
would use days.
Statistical Code
The unit of measure used for tracking and monitoring statistical data. For example, using a
statistical code of WS may represent the number of Workstations.
Statistical Forecast
In PeopleSoft Demand Planning,, a forecast developed at each level of the forecast pyramid
and that considers the item’s history in isolation.
Status Checking
In PeopleSoft Projects, a control feature that can be applied to transactions coming into
Projects from cost feeder systems. If the incoming transaction does not conform to
predetermined status and analysis conditions, an online warning will display or the transaction
will be rejected.
Status Position Code
A code that identifies the various conditions of a position, e.g., frozen, classified, etc.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
197
GLOSSARY
Statutory Account
Account required by a regulatory authority for recording and reporting financial results. In
PeopleSoft, this is equivalent to the Alternate Account (ALTACCT) ChartField.
Step
A secondary level or subcategory within the primary pay level (depending upon pay plan,
different employees may have a different number of steps within their primary pay level).
Step Progression
In PeopleSoft Workforce Analytics, a pay increase granted to an employee or group whose
salary plan includes steps within grades. Each step increase is a step up the pay range for the
employee.
Stock
In corporate finance, the form in which an owner's interest is represented, distributed in units
known as shares.
Stock Administrator
An individual who administers and manages the corporation’s benefits and/or equity
compensation plans. This individual serves as the contact for transfer agent and broker
inquiries. Stock Administrators manage Stock Option Plans, Employee Stock Purchase Plans,
Restricted Stock Award Plans, and Stock Bonus Plans.
Stock Appreciation Rights (SAR)
A contractual right to receive, either in cash or employer stock, the appreciation in the value of
the employer’s stock over a certain period of time. A SAR can be used alone or in tandem
with Incentive Stock Options (ISO/SAR) or Nonqualified Stock Options (NQ/SAR).
PeopleSoft Stock Administration supports only tandem SAR’s.
Stock Awards
Stock allocations that are processed in the Manage Variable Compensation business process.
Stock Administration creates stock grants from finalized stock awards.
Stock Exchange
An organized marketplace in which bonds, stocks, and common stock equivalents are traded
by members of the exchange, acting as agents (brokers) and as principals (dealers or traders).
Such exchanges have a physical location where brokers and dealers meet to execute orders to
buy and sell securities. Each exchange sets its own requirements for membership.
Stock Option
A contractual right granted by the company, generally under a stock option plan, to purchase a
specified number of shares of the company’s stock at a specified price (the exercise price) for
a specified period of time (generally five or ten years). Assuming that the exercise price is the
GLOSSARY
198
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
same as the fair market value on the grant date, the option will become more valuable if the
fair market value goes up, because the option effectively gives the optionee the right to buy
stock in the future at a discount.
Stock Price
The price per share of a company's stock. See, also, "share price.
Stock Purchase Participant
An individual who participates in the corporation’s Stock Purchase Plan.
Stock Purchase Plan
A type of broad-based stock plan that permits participants to use payroll deductions
accumulated over a period of time to acquire stock from the company.
Stock Split
A change in the capitalization of an issuer that increases or decreases the number of securities
outstanding, and adjusts the value of the securities accordingly, without a corresponding
change in the assets or capital of the issuer. For example, if an employee has options to
purchase 25 shares at $10 per share and the company has a 2-for-1 stock split, the employee
thereafter has the option to purchase 50 shares at $5 per share.
Stock Swaps
A payment method that can be used to cover the cost of the exercise price and taxes depending
on whether it is allowed by the plan. When an employee elects to exercise a stock option by
means of a stock swap, they surrender already-owned shares of stock to pay the total required
option exercise price and/or taxes for the option being purchased. The surrendered shares are
usually valued at the fair market value of the company’s stock on the date of exercise.
Stock Trading Symbol
The three or four letter symbol used to identify a company's stock on the stock exchange
where it trades. Also known as a "ticker symbol".
Stock Withholding
A cashless method of satisfying the withholding taxes due upon the exercise of a stock option
by authorizing the company to withhold from the shares being exercised a number of shares
equal to the taxes.
Stockholder of Record
Person or entity, often a broker or the Depository Trust Company, named on the issuer's or
transfer agent’s stock record books as the owner of shares held in "street name." The
stockholder of record acts in part as a way of safekeeping stock certificates that might
otherwise be lost by the beneficial owner, and also in order to keep the identity of the
beneficial owner confidential from the company.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
199
GLOSSARY
Stock-In Probability
A replenishment option for defining transfer parameters for PeopleSoft Demand Planning or
Inventory Planning upload files. The option is the percentage of time you want to have the
item on hand for the Business Unit and is used to calculate safety stock.
Stop Time
Out punch
Storage Area
A division of a Business Unit used to store material and to track Inventory Transaction.
Storage areas might include shipping and receiving docks, staging areas, warehouse zones,
and inspection and quality control departments. Each storage area can be divided into a
maximum of four levels, with each level representing a physical subdivision of the area.
Storage Level
A hierarchical subdivision of a storage area.
Storage Location
The combination of a storage area and that area's most detailed storage level. This is the
smallest definable physical space within an Inventory Business Unit.
Strategic Initiatives
In PeopleSoft Balanced Scorecard, actions the organization must take to implement strategy.
May be temporary or short-term in nature.
Strategic Thrust (ST)
In PeopleSoft Balanced Scorecard, four to five statements or paragraphs that summarize the
core components of an organization’s strategy. Strategic thrusts describe the key areas across
which a scorecard is balanced. They are themes or goals your organization is striving to
achieve; more specific descriptions of what you must do to achieve that goal are defined by
critical success factors. Key performance indicators may be attached to strategic thrusts as
long as there aren’t critical success factors below them, but typically strategic thrusts aren’t
directly associated with key performance indicators.
Strategy Tree
In PeopleSoft Balanced Scorecard, the hierarchical relationships of the objectives your
organization is striving to achieve. Used as the foundation for a scorecard, and typically
balanced across four major categories: Financial, Customer, Learning and Growth, and
Internal Processes. These are made up of Vision, Strategic Thrusts, and Critical Success
Factors.
GLOSSARY
200
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Stratification Engine
A support module that structures the volume of financial accounts and balances at a large
financial institution to a manageable scale for processing by the PeopleSoft Funds Transfer
Pricing (FTP) and PeopleSoft Risk Weighted Capital (RWC) applications. It categorizes data
by a range of values and summarizes data based on rules you define for FTP and RWC.
Stratification Wizard
Stratification Wizard is a tool you can use to quickly create new stratification rules or update
the existing rules. Stratification Wizard prompts you for each of the possible source and
destination fields, grouping operations, and summarization actions to be performed.
Stratification Wizard enables you to stratify your data according to tiers, discrete values,
periodic increments, and numeric increments. It also enables you to leave the data aggregated.
Streams
An optional feature that enables you to reduce processing time by processing groups of payees
simultaneously.
Street Name
See "Stockholder of Record".
Stretch
In a Goals Matrix performance scale (In PeopleSoft Workforce Analytics), this is the level of
performance for which an employee achieves maximum pay out. Performance above this
level receives no greater pay out.
Strike Price
The price per share which must be paid in order to exercise the stock option. The strike price
is typically the fair market value of the stock on the grant date. Also known as the "exercise"
or "grant" price.
String constant
String constants are delimited in PeopleCode by using either single (�) or double (") quote
marks.
Strip Funding
One of several methodologies used by PeopleSoft Funds Transfer Pricing (FTP) to derive
maturity when calculating FTP rates based on matched maturity funding. This approach
matches the projected cash for the instrument in each time period, with a specific cost of funds
rate for that cash flow. The FTP rate for the instrument is then calculated by weighting the
cost of funds rate for the cash flow in each time period by the term of the cash flow.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
201
GLOSSARY
Structured Query Report (SQR)
A type of printed or displayed report generated from data extracted from a PeopleSoft SQLbased relational database. PeopleSoft applications provide a variety of standard SQRs that
summarize table information and data. You can use these reports as is, customize them, or
create your own.
Style File (Verity)
Collection style refers to a set of configuration options that are used to create the indexes
associated with a collection. A collection has one collection style and it is defined in a set of
style files before creating the collection.
SubCustomer Qualifier
A value that groups customers into a division for which you can generate detailed history,
aging, events, and profiles.
Sub-Process Section
A type of section you can add to a process list. Sub-process sections are especially useful for
performing iterative processes such as gross ups (calculating the gross amount for a given net
amount). You can include conditional logic within a sub-process section.
Subscription
The process of mapping fields, selecting data parameters and submitting the information to an
outside vendor.
Substitute Item
In PeopleSoft Manufacturing, an item that can be used when there are no primary components
available in inventory or when there is a long-term shortage of the original item. The
substitute item can be defined at three levels: setID, business unit/item, and bill of
material/engineering bill of material.
Subtask
A lower-level Planning task in a schedule's hierarchy that rolls up into a parent task. For
example, an operation performed on a production ID would be a subtask of the production
order.
Summarization Process
See Rollup.
Summary ChartField
A feature for creating summary ledgers that roll up detail amounts based on specific detail
values or on selected tree nodes. When detail values are summarized using tree nodes,
summary ChartFields must be used in the summary ledger data record to accommodate the
maximum length of a node name (20 characters).
GLOSSARY
202
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Summary Forecast
In PeopleSoft Demand Planning, a type of forecast that results from adding up the adjusted
forecast totals from the next lower level, meaning the sum of the children's forecasts for the
parent. The summary forecast at level one (1) is always zero since there is not a logical lower
level.
Summary Ledger
An accounting feature used primarily in allocations, inquiries, and PS/nVision reporting to
store combined account balances from detail ledgers. They increase the speed and efficiency
of reporting by eliminating the need to summarize detail ledger balances each time a report is
requested. Instead, detail balances are summarized in a background process according to userspecified criteria and stored on summary ledgers. The summary ledgers are then accessed
directly for reporting.
Summary Tree
A tree used to roll up accounts for each type of report in summary ledgers. In effect, summary
trees enable you to define "trees on trees." In a summary tree, the detail values are really
nodes on a detail tree or another summary tree (known as the basis tree). A summary tree
structure specifies the details on which the summary trees are to be built.
Summed Adjustment Type
When the system finds multiple summed discounts, they are added together, and applied once.
Super Tree Utility
A PeopleSoft Enterprise Warehouse utility that enables you to combine multiple effective
dates of a tree into one. This super tree contains all tree changes for a certain period of time
enabling you to analyze effective dated trees more easily.
Supplemental IRR
An IRR type used when a federal employee's retirement deductions were originally underreported. An agency can create a Supplemental IRR to report the difference in the retirement
deduction amount to the Office of Personnel Management (OPM).
Supplemental Tax Method
A payroll tax calculation method that uses a straight percent rather than allowances. The
percentage depends on state requirements.
Supply Chain Warehouse
See Warehouses.
Support Costs
Activity costs not directly connected to production.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
203
GLOSSARY
Support Modules
The support modules are a collection of engines and analysis models that derive values, rates,
financial calculations, and prices. PeopleSoft Analytic Applications take this data and use it
for further processing. The support modules perform processes that are used in the financial
services industry. They are only utilized by two of the PeopleSoft Analytic Applications: Risk
Weighted Capital (RWC) and Funds Transfer Pricing (FTP).
Support Team
A group of people working together to sell to and/or support a customer. You can assemble
support teams and associate them with ship to customers, quotes, sales orders, and Buying
Agreement.
Supporting Element Overrides
Provide a mechanism to override various supporting element types, such as brackets,
dates, durations, formulas, and variables, at various different levels.
Supporting Elements
Supporting elements are building blocks for other elements. In PeopleSoft Global Payroll,
they are used in combination with other elements to create rules. They are not stand-alone.
Typical supporting elements are arrays, brackets, rounding rules, and fictitious calculations.
Suspend Exercise
As a condition of a leave of absence, a company may stipulate to restrict the exercise of shares
during the leave or for a period of time. Only applicable if the Stock Action is LOA.
Suspend Vesting
As a condition of a leave of absence, a company may stipulate to suspend vesting of shares.
Only applicable if the Stock Action is LOA. If a company does not Suspend Vesting then the
Vest Deferral Grace Period and Service Rule are not applicable.
Suspended Item
In PeopleSoft Demand Planning, an item suspended by the system. The suspension is due to
the lack of demand for the number of periods defined for the item's Control Group.
System Element
In PeopleSoft Global Payroll, system elements are delivered and maintained by Peoplesoft.
There are two types of system elements: database system elements and system-computed
elements. Database system elements contain payee-related data that can be used frequently in
a calculation, such as department ID, location, and personal data. System-computed elements
are automatically populated by the payroll process.
GLOSSARY
204
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
System Functions
A list of all activities that the system supports, along with their associated General Ledger
distributions.
System-Defined Count
The PeopleSoft Inventory feature that employs user-defined criteria to begin the count
creation process.
System-Defined History
Any statistical information updated by the posting and aging programs, maintained to reflect
customer credit standing.
T
T+3
The obligation in the brokerage business to settle securities trades by the third day following
the trade date. "Settlement" occurs when the seller receives the sales price (less the broker’s
commission) and the buyer receives the shares.
Table
The underlying format in which data is stored by columns (fields) and rows (records, or
instances).
Table Lookup
A utility in PeopleSoft Pension Administration that finds an unknown value based on a known
one in your data set. For example, you can look up an interest rate based on a year, or an
actuarial factor based on an employee’s age.
TableMaps
In the PeopleSoft Enterprise Warehouse, TableMaps define the physical relationships between
related tables. TableMaps allow you to define “families” of related tables and the columns
that define the key relationships between the tables.
TableSet
A group of rows across control tables identified by the same SetID.
TableSet Sharing
Specifying the control table data for each business unit so that redundancy is eliminated.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
205
GLOSSARY
Tardy
The circumstance when a time reporter reports for work after the scheduled start time
Target
In a Goals Matrix performance scale (In PeopleSoft Workforce Analytics), this is the
performance level your organization establishes as the norm for performance and pay out.
Target Cost
A desired target cost (for production, engineering or marketing) is found by subtracting the
desired profit margin from a competitive or estimated price.
Target Currency
The value of the entry currency or currencies converted to a single currency for budget
viewing and inquiry purposes.
Target End Date
The intended end date for employee schedules in Time and Labor reporting. You establish a
target end date, and depending on the work schedule templates, the application determines
what the actual end date should be.
Target Grade
Highest obtainable grade for a position.
Target Matrix
In PeopleSoft Workforce Rewards, the Target Matrix defines the level of award to be paid
based upon a predetermined level of performance that a defined measure is evaluated against.
Target Plan
In PeopleSoft Workforce Rewards, a plan for distributing compensation awards, in which the
level of the award is linked directly to a predetermined level of performance that a defined
measure is evaluated against. For example, a Target Plan for a Sales group might be as
follows: “As a group, increase the business unit’s net income by 10% and each member of the
group will be eligible for an award equal to 5% of base pay.”
Target Rate
In PeopleSoft Workforce Rewards, calculated market rates you choose to use as new target
pay rates for the jobs in your organization. Think of these target rates as pay guidelines, in
support of your company’s overall pay strategy.
GLOSSARY
206
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Target View
In PeopleSoft Demand Planning, the of the views being reconciled during the Cross-View
Reconciliation process. During the process, fields for reconciliation are defined for both a
source and target view.
Tariff
In Germany a Tariff is a contract between the employee’s unions and the employers'
association, defining labor agreements on issues such as standard working hours, income, and
vacation. This contract is valid for all of Germany for the business or industrial sector the
company is working in (such as Banking or Metal).
Tariff Area
In Germany, additional labor agreement terms beyond those in the Tariff, such as salary plans
or employee reviews, can also be applied based upon the Tariff Area. The Tariff Area is often
split along regional lines (such as Bavaria or Berlin).
Task
See Manufacturing Task and Planning Task
Task
A piece of work assigned to or demanded of a person; a unit of work (see Time Reporting)
Task Entity
Individual component of a task; for example, Project ID, Activity ID, Work order,
Department, Company, Business Unit (see Time Reporting).
Task Profile
A way of viewing or establishing where to allocate employee task information for a day and
time. The task profile fields that appear on the page are established by the Task Profile
Template.
Task Profile
Entity that establishes the default values for optional and required task elements. This can be
for single or multiple tasks. (i.e. default values based on hours allocation, percentage
distribution, equally distributed or by prompt) (see Time Reporting)
Task Rules
A methodology that is applied to scheduled, reported and payable time to allocate or
redistribute task assignments (see Time Administration)
Task Transfer
Department transfer
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
207
GLOSSARY
Task Values
The customer defined value for a specific task element i.e. Customer 1, project 1, etc (see
Time Reporting)
Taskgroup
Identifies the default time reporting templates, task template, and task profile(s) for time
reporters that share the same task reporting requirements.
Taxable Benefits
Any employer contributions that are subject to Federal Withholding Tax.
TDS (Transfert de DonnГ©es Sociales)
In France the TDS is a social security transfer report, submitted on magnetic media to the
government.
Team Member
An individual who is part of a support team. Each team member may be in a commissionable
or non-commissionable role.
Technical Scenario
In PeopleSoft Enterprise Warehouse technical scenarios allow you to set up the object type
values that the Resolver uses to chunk the record/TableMap you’ll resolve. Technical
scenarios allow technical users to define chunking criteria that enable chunks to run in
parallel. This allows for parallel data processing.
Template
A portal template is simply HTML code, associated with a web page, to define the style and
layout of the page. Templates allow a developer to build an HTML page by combining
HTML from a number of sources. Templates do two basic things: define the layout of the
page, and define where to get HTML for each part of the page.
Template Pagelet
One piece of an overall template. For example, in a given template, there may be one
template pagelet for the universal navigation header and one template pagelet for the target
content.
Temporal Constraint
A relationship between Planning tasks that defines their sequence and timing in a schedule.
Temporal constraints cannot be violated by the Optimizer. PeopleSoft Planning constraints
include finish to start, start to start, finish to finish, start to finish.
GLOSSARY
208
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Temporary Continuation of Coverage (TCC)
The TCC program, as prescribed by the OPM, requires Federal agencies to provide to
separating Federal employees the opportunity to temporarily continue their FEHB coverage
for up to 18 months (unless involuntarily separated because of gross misconduct), provided
the individual pays the full cost of coverage, including both the employee and government
share and a two percent administrative charge. Agencies may elect to provide this service inhouse or enter into cross-servicing agreements with another Federal agency.
Tenor
Used by the PeopleSoft Funds Transfer Pricing (FTP) application to refer to the maturity of an
instrument. It represents the length of time an instrument is available as either a source or use
of funds. The FTP application calculates the transfer price for an instrument, based on the
marginal cost of funds of similar liquidity and tenor.
Term Certain and Continuous Payment Option
See Certain and Continuous Payment Option.
Term Certain Payment Option
See Certain Only Payment Option.
Termination
A transaction in which an employee ceases to be an employee of the corporation.
Threshold
In a Goals Matrix performance scale (In PeopleSoft Workforce Analytics), this is the
minimum threshold for adequate performance, the designated level of performance below
which it is inappropriate to pay incentives.
Think-time process
Think-time functions suspend processing either until the user has taken some action (such as
clicking a button in a message box), or until an external process has run to completion (for
example, a remote process).
Three-Tier
A three-tier architecture introduces an intermediary application server between the client
workstation and the database server to improve performance. Within PeopleSoft, the
application server sends the SQL to the database and then returns results to the client in the
form of lightweight Tuxedo messages.
Threshold Checking
In PeopleSoft Projects, a control feature that can be applied to transactions entered directly
into Projects or integrated into Projects via the INTFC_PROJ_RES table. If the transaction
exceeds a predefined tolerance, a warning will display or the transaction will be rejected.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
209
GLOSSARY
Thrift Savings Plan (TSP)
A voluntary retirement savings and investment plan for Federal employees administered by
the Federal Thrift Investment Board.
Ticker Symbol
The three or four letter symbol used to identify a company's stock on the stock exchange
where it trades. Also known as a "stock trading symbol".
Tiers
In the financial services industry, Tiers are ranges that you set up for stratifying your
instrument data (such as amounts, rates, and numbers) into specific groups. You define Tiers
within Stratification Engine.
Time Administration
A process which provides four [separate] different online tools for creating, maintaining, and
applying an organization’s compensation, task, and exception rules to both reported and
scheduled time. templates, actions and condition, SQL objects, and user exits
Time and Labor Period
A distinct, configurable period of time used by all the PeopleSoft Time and Labor processes
(see Time Reporting)
Time and Labor User
Either a Time Reporter or a Time Manager
Time Capture Device
Third party system or methodology for collecting elapsed or time capture device time, i.e.,
time capture device, IVR, Fax, etc. (see Time Reporting)
Time Collection
A Time and Labor feature that collects positive and exception time reports, applies appropriate
business rules and edits to the reported time to ensure validity and reasonableness, and returns
errors and questionable items to the time reporter for correction or scrutiny. Time collection is
also responsible for scrutinizing future (previously) posted time information for correctness
when those reports are ready for use.
Time Collection Device
A group of time collection device lumped together and named for ease of assignment to
employees. In other words. clock group 1 is made up of clock 1, and clock 2. Employee 123
is assigned to clock group 1 and can then punch in at either clock 1 or clock 2. (see
Understanding Time Collection Device)
GLOSSARY
210
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Time Collection Device time
Reporting time by recording actual starts and stop times (see Time Reporting)
Time Dimension
Determines how date-related information is presented in a Cube View. This dimension
defaults to a two-level hierarchy consisting of the Inventory Policy year and a standard
period, such as monthly.
Time Fence
In PeopleSoft Planning, a user-defined parameter that specifies the business rules to be used in
the generation of the plan. PeopleSoft Planning time-fence types include start of time, end of
time, planning close date (demand time fence), purchase order fence, leveling fence, action
message cutoff, and planning time fence.
Time Manager
An individual who supervises Time Reporters
Time Period
A period of Time used in Time and Labor rules processing. You can categorize time periods
in terms of days, weeks, or months. You establish day, week, or month-type periods for use
when you apply rules for compensation, holidays, and so on.
Time Report
A payroll time and/or labor distribution time report for an employee for any date within the
employee’s current period.
Time Reporter
Any employee or contractor for who time is reported or generated in PeopleSoft Time and
Labor.
Time Reporter Information
Values associated with the Time Reporter that are displayed when entering or viewing
reported time and facilitate the processes of Time Reporting and Time Management (see Time
Reporting)
Time Reporting
Any information required by a business unit that can be attributed to an individual employee
(worker/contractor) and can be expressed in hours.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
211
GLOSSARY
Time Reporting Code
A hybrid of two PeopleSoft objects: the Payroll Earnings Type and the Human Resources
Absence Type. The Time Reporting Code represents the level at which a business actually
needs to track employee time to support all of its administrative and compensation needs.
Time Reporting Code Type
Categorization of a time reporting code. Valid categories include. units, amounts, hours or a
combination of hours and amounts (see Time Reporting)
Time Reporting Group
See Group [Time and Labor].
Time Segment
For Service, Cash Balance Accounts, and Employee Accounts, employees can accrue benefits
differently at different times. The period of time during which employees use a particular rule
is that rule’s time segment.
TimeSpans
Relative periods, such as year-to-date or current period, that can be used in various PeopleSoft
General Ledger functions and reports when a "rolling" time frame, rather than a specific date,
is required. TimeSpans can also be used with Flexible Formulas in PeopleSoft Projects.
Tolerance
In PeopleSoft Projects, a value that is defined at either the project or activity level as either a
percentage of a project’s funding or an actual amount.
In commitment control, the percentage over budget that you allow, excluding revenues applied
to increase budget limits, before the system creates an exception.
Total Authorized But Unissued
The combined total number of shares from Shares Available to Issue plus Total Options
Outstanding.
Total Compensation
In PeopleSoft Workforce Analytics, this is generally the officially recognized compensation
provided an employee in the course of their employment with an organization; includes both
direct compensation and benefits compensation.
Total Compensation Management
The ability to track and report on all types of cash programs, non-cash programs, benefits and
deferred compensation for all current workers, ex-workers and individuals associated with exworkers who receive compensation due to the employment of the ex-worker.
GLOSSARY
212
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Total Non-Compensation
In PeopleSoft Workforce Analytics, generally, this is the often unrecognized compensation an
employee receives in the course of their employment with an organization; it includes
Learning and Development compensation such as training, and Workplace Environment
Compensation such as telecommuting privileges or other prerequisites.
Total Options Outstanding
The number of company shares currently held by shareholders as tracked by the transfer agent.
Derived by using the number of Prior Outstanding plus Grants, less Exercises and less
Cancellations.
Total Rewards
In PeopleSoft Workforce Analytics, this is the total rewards provided to an employee by their
employment with an organization; it includes their officially recognized total compensation,
and less often recognized total non-compensation.
Tour of Duty
The scheduled days and hours per day of attendance at a duty station for an employee.
Tracking Signals
PeopleSoft Demand Planning,a forecasting tool that detects bias in the forecast and provides
an early warning of an unstable forecast. There are six tracking signals associated with each
Forecast Item that correspond to the six most recent historical periods.
Trade Payment
An authorization for a customer deduction in a Promotion application.
Training Report 2483
The Training Report 2483 is a French regulatory report used to declare vocational training
your company has provided to your employees. It is also known as the Declaration 2483
Report. The purpose of the report is to receive tax deductions from the government based
upon the amount of money your company has spent on training.
Transaction
A named command with optional named and typed inputs and outputs. The associated external
system or the Business Interlink Plug-in understands this command. The types of inputs and
outputs are based on a set of generic types.
Transaction
A named command with optional named and typed inputs and outputs. The associated external
system or the Business Interlink Plug-in understands this command. The types of inputs and
outputs are based on a set of generic types.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
213
GLOSSARY
See also Inventory Transaction or, for PeopleSoft Projects, Resource Transaction.
Transaction catalog
Lists transactions used to interface to the external system.
Transaction Code
In PeopleSoft Projects, an additional field on each resource transaction that is used in
conjunction with accounting entry templates. Transaction codes enable you to deal with
exceptions to your accounting entry templates without having to create additional transaction
types. You can set up separate accounting entry templates for resource transactions containing
the transaction codes you create. The accounting entry templates for those resource
transactions lines can then use the same transaction types, but specify different accounts.
In PeopleSoft Asset Management, transaction codes identify special asset transactions and are
used in conjunction with transaction type to create accounting entries.
Transaction Code
Identifies what action has taken place against the position.
Transaction Costing
See Multidimensional Costing
Transaction Currency
In the financial services industry, the original currency in which a company conducts its
business activities. When a company has multinational operations, it may use different
transaction currencies. These are translated to the base currency for consolidation and
reporting of financial results.
Transaction Date
The date a transaction actually occurred as opposed to the date the transaction is recognized—
the accounting date (although the two dates can be the same).
Transaction Dated
Data aggregated over a date range.
Transaction group
The package can contain one or more transaction groups. Each transaction group is a set of
transactions of the same type, with the same trading partners involved.
Transaction Loader
The SQR in PeopleSoft Asset Management that transfers load lines from the Loader tables
into the PeopleSoft Asset Management Tables as assets and open transactions.
GLOSSARY
214
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Transaction Tables
In the PeopleSoft Enterprise Warehouse, these are tables that contain dynamic information and
are keyed by business units.
Transaction Type
The building blocks of accounting entry templates in PeopleSoft Asset Management and
Projects. For each transaction type you create you define specific transaction lines. The
transaction lines are then transferred into accounting entry templates. In the accounting entry
templates each transaction line is assigned a specific general ledger account.
Transactional System
A business application for performing the business transactions that keep your company
running. Transactional applications, and the databases that support them, are optimized for
quick transaction processing. Because they are constantly changing and are not optimized for
data retrieval, transactional system databases are not usually the best source of data for
analysis.
Transfer Agent
An individual or firm who that keeps a record of your shareholders and the number of shares
they own. Transfer Agents also issue new share certificates and cancel old certificates.
Unlike Brokers, Transfer Agents are not responsible for selling stocks. Instead they are
primarily concerned with maintaining records on all stocks which your company has issued.
Transfer Forecast
In PeopleSoft Inventory Planning, a Generation process option that transfers the forecast from
the target view in Demand Planning forecasts. The process only transfers items from Demand
Planning that have been set to update the Inventory Policy.
Transfer Punch
The start of a work period that specifically denotes a change in task and usually compensationrelated characteristics
Transfer Type
An interunit transfer setting PeopleSoft Production Planning and Enterprise Planning use to
determine where it will obtain item data for transfer tasks. If the type is a supply or demand
transfer task, the Planning engine only processes the transfer item for a single location,
reducing the time for plan processing. If the transfer type value is both, the Planning engine
processes the transfer item using data from both the To and From units.
Transfer Worksheet
A work space for transferring an open item from one customer to another.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
215
GLOSSARY
Transferable Stock Options
Options that may be transferred by the optionee, generally only to a family member or to a
trust, limited partnership or other entity for the benefit of family members, or to a charity.
Translate Table
A system edit table that stores codes and translate values for the miscellaneous fields on the
database that do not warrant individual edit tables of their own.
Translate Table
A system edit table that stores codes and translate values for the miscellaneous fields on the
database that do not warrant individual edit tables of their own. In most cases PeopleSoft
maintains the Translate Table.
Transport Rate
The Transport is a statutory deduction in France. Each establishment has a rate, and the
URSSAF notifies establishments of this rate on a yearly basis. This deduction is used by the
region to subsidize transportation, and maintain and build roads.
Transportation Lead Times
The transportation lead time is the in-transit interval from the date and time a shipment leaves
your warehouse (Inventory Business Unit) to the date and time it arrives at your customer's
receiving dock. The transportation lead time is used in calculating the scheduled shipment and
scheduled arrival dates on the order when you enter either a requested arrival date or a
requested shipment date.
Travel And Relocation Date
Length of time an employee must remain in the Government after the Government has paid to
relocate him/her from one official duty station to another or for initial appointment.
TRC Program
A program that runs the level at which an organization actually needs to track employee time
to support all of its administrative and compensation needs. TRCs are assigned to TRC
Programs, which are ultimately assigned to workgroups. Multiple Workgroups can share
these TRC Programs.
Treasury Interface files
These are DOS-based files generated by PeopleSoft in accordance with FMS file layouts for
transmission of payment data to one of the FMS' Regional Financial Centers.
Treasury Position Code
In the financial services industry, this is a lookup code used for off-balance sheet treasury
position accounts, such as foreign exchange, derivatives, precious metals, or any other account
position that is the result of trading room and treasury operations.
GLOSSARY
216
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Treasury Stock
Shares of a company’s stock that have been repurchased or otherwise reacquired by the
company and are "held in treasury." Whether the treasury shares count as "issued" or as
"outstanding" shares of the company is a matter of state corporate law. Generally, a company
may not vote its own shares held in treasury.
Treasury Stock Method
The method of calculating primary and fully diluted earnings per share when common stock
equivalents such as unexercised stock options exist. Required under generally accepted
accounting principles.
Tree
The graphical hierarchy in PeopleSoft systems that displays the relationship between all
accounting units (for example, corporate divisions, projects, reporting groups, account
numbers) and determines roll-up hierarchies.
Tree Compare Utility
A PeopleSoft Enterprise Warehouse utility that enables you to compare effective dates for
trees. The results page shows nodes that have been added, deleted, or moved from one parent
to another. You may also view the detail objects that have changed.
Tree control
Tree Control is a hierarchical search tool that you can imbed in a panel. Tree Controls give
the user a view of hierarchical data structures and enable them to drill down through the
hierarchy to a particular row of data.
Tree Denormalizer
The Tree Denormalizer Application Engine process converts trees into multi-column data
format so they can be used by third-party OLAP or ROLAP tools.
Trigger
See Event Trigger.
Trustee Extract
A PeopleSoft Pension Administration data extract containing data that a third party needs in
order to produce pension checks.
Turnover Costing
In PeopleSoft Workforce Analytics, this is a calculation of the cost to the organization of
employee turnover, in dollars.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
217
GLOSSARY
Turnover Rate
In PeopleSoft Workforce Analytics, the rate that employee’s are leaving the company.
TUXEDO
BEA's middleware product used to manage transaction queues, server process initiation,
system administration, time-outs, data encryption, compression, logging and other application
server processing.
Two-Tier
A two-tier architecture refers to the traditional client/server model in which a client
workstation connects to and sends SQL directly to the database server.
Type of Appointment
Indicates the specific type of appointment, e.g., part-time permanent, full time temporary, etc.
U
Underlying Security
The security underlying a stock option that an optionee has the right to buy, or the security
underlying a convertible security.
Underpayment Adjustment Limit
The maximum amount or percent above which underpayment adjustments are not allowed for
a given business unit.
Underwater Option
When the current market price is below the option exercise price. When an option is
underwater, it would cost more than the underlying stock is worth to exercise the option. Such
options are also described as being "out-of-the-money."
Underwriter
An investment banking firm that actually buys the shares from the company in a public
offering and then resells them (at a slightly higher price) to its customers.
Unexpected Losses
In the financial services industry, these occur when the economic capital is exhausted and the
insolvency rate is exceeded. Unexpected losses are determined by a targeted insolvency rate
(confidence level); for example, a 99.7% confidence level indicates that there is a 0.03%
estimated probability that the unexpected losses will exceed economic capital (or shareholder
equity).
GLOSSARY
218
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Union Code
Part of a group of defaults assigned to job codes. Union code may be used by human
resources to group similar jobs or bargaining units together, dependent on individual company
parameters.
Unit Code
In the financial services industry, Unit Code is used as an alternate means of measuring the
relative size of companies participating in external surveys. A typical measure would be the
number of employees in a company. The concept of unit is generic enough that the units can
be other measures besides number of employees. For example, in the hospital industry the
unit could be the number of hospital beds. Or in the hotel industry the unit could be the
number of rooms.
Unit of Measure (UOM)
A type of unit used for quantifying in PeopleSoft systems. Depending on the application,
units of measure might describe dimensions, weights, volumes, or amounts of locations,
containers, or business activities. Examples include inches, pounds, workhours, and standard
cost dollars.
Unit of work
Each transaction group includes one or more individual units of work. A unit of work is a
single transaction that you want to commit or rollback as a whole.
Unitize Assets
The process of unitizing a single load line, usually originating from a different application,
into multiple assets in PeopleSoft Asset Management.
Univariate Forecasting Technique
In Enterprise Planning and Simulation, the Univariate Forecasting Technique is a forecasting
method that uses only the recorded history for the value to forecast its future.
Universal Navigation Header
Every PeopleSoft portal includes the universal navigation header, intended to appear at the top
of every page as long as the user is signed on to the portal. In addition to providing access to
the standard navigation buttons (like Home, Favorites, and signoff) the universal navigation
header can also display a welcome message for each user.
Unscheduled Punch
A punch that is made be a time reporter who was not scheduled (see Time Reporting)
Unvested Shares
Unvested stock options are options that have not vested and, therefore, are not exercisable.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
219
GLOSSARY
URI
A URI does not include the query string (the text following a ? on the URL). You can think of
it as a subset of the URL that points to the resource, but does not include any parameters being
passed to that resource. From the above example, the URI portion of the URL is as follows:
http://serverx/InternetClient/InternetClientServlet
URL
In this document, the term URL refers to the entire query string. The following is an example
of a URL:
http://serverx/InternetClient/InternetClientServlet?ICType=Script&ICScriptProgramName=W
EBLIB_BEN_401k.PAGES.FieldFormula.iScript_Home401k
URSSAF Code
The URSSAF is the body responsible for ensuring payment of Social Security contributions
by all French employers.
Useful Life
The amount of time an asset may be depreciated.
User Data
PeopleSoft Demand Planning,data held in user-defined fields. These fields provide for storage
of additional data that is not supplied by the standard set of fields in the system. The fields
can also become part of the key for the Forecast Item at each level within the Forecast View.
User-Defined History
A summary of customer receivables activity that is defined by the user.
User-Field Code
PeopleSoft Demand Planning,a definition of a set of user-defined fields that contain data
specific to the installation.
V
Valuation
The way a company represents the value of a non-monetary award such as stock.
Value allocation
A process in PeopleSoft Workforce Planning, by which you assign an overall monetary value
to a competency strategy for your organization, and assign a weight or importance to the roles,
GLOSSARY
220
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
competencies and accomplishments in the strategy. The system then allocates a breakdown of
the value to roles, competencies, and accomplishments in the strategy based on their relative
weighting or importance.
Value Object
In the PeopleSoft Enterprise Warehouse, Value Objects are a metadata layer that provides
descriptive information about fields and values. Value Objects are used as constants in Data
Manager target object definition.
Variable
Temporary storage for use or defined information used in the creation and application of rules
(see Time Administration)
Variable [Global Payroll]
An element type that defines and stores values such as a character, date, or number. You can
use variables to create generic formulas for situations where you use the same values over and
over again in a calculation.
Variable Compensation
In PeopleSoft Workforce Analytics, direct compensation that is not fixed, that is paid out in
variable amounts, such as bonuses and commissions.
Variable Plan.
A plan in which either the number of shares and/or the price at which they will be issued is not
known on the grant date.
VAT Account Type
A code that identifies the different types of accounting entries that must be created for VAT
transactions. These codes are also used to categorize transactions in the VAT transaction
table. The account type is used in conjunction with the VAT code and VAT transaction type
to determine the VAT ChartFields used for a given VAT accounting entry.
VAT Apportionment
For mixed activity, VAT apportionment is the mechanism that allows you to specify the ratio
of taxable activity to exempt activity for individual ChartFields.
VAT Calculation Method
Options are Net or Gross. When calculating VAT at net, the early payment discount is applied
to the goods amount before calculating the VAT. The amount of VAT calculated using this
method is the amount that is to be paid, regardless of whether the early payment discount is
actually taken at time of payment. When calculating VAT at gross, the VAT is initially
calculated based on the gross transaction amount. The early payment discount is not taken
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
221
GLOSSARY
into account at this point. However, in some countries an adjustment is made to the VAT
amount at the time of payment, if the early payment discount is taken.
VAT Calculation Type
Options include Exclusive or Inclusive. If exclusive, the VAT amount is stated separately
from the goods amount. If inclusive, the VAT is not stated separately but is included with the
goods amount.
VAT Code
The tax code used to define a percentage the system uses to determine the VAT amount. The
VAT code is similar to the sales and use tax code, with a few exceptions. The tax authority
tied to the VAT code generally consists of a single authority, and the ChartFields for a VAT
code don’t reside with the tax authority but are determined by the combination of the VAT
code, VAT account type, and VAT transaction type.
VAT Declaration Point
When VAT transaction information is declarable for reporting purposes. Options include
Invoice or Payment. If you choose invoice, the system will recognize VAT at invoice time; if
you choose payment, the system will recognize VAT at the time of payment.
VAT Entity
The level or entity within an organization at which VAT reporting is performed. VAT entities
can be registered for VAT in multiple countries, but only one country can be designated as the
VAT entity’s home country. VAT and Intrastat reporting information and VAT default
information are defined for each country in which the VAT entity is registered. You may also
specify any VAT exceptions—either exoneration or suspension from paying VAT—for any
country in which the entity is registered.
VAT Exempt Supply or Purchase
A transaction where the product or item is non-taxable or exempt from VAT. No VAT code is
associated with the transaction. Although no tax is applied to the transaction, the transaction
is still logged in the VAT transaction table.
VAT Exonerated
A transaction where the purchaser has been determined as not subject to VAT. For these
cases, there may be an exoneration certificate number tied to the purchasing entity (either the
customer or the VAT entity) as proof of exoneration. A zero-rated VAT code should be
associated with transactions where exoneration applies. The transaction is still logged in the
VAT transaction table, but no tax is applied.
VAT Rebate Percent
Within Canada, for Public Service Bodies, the percentage of VAT that is not normally
recoverable but which may be refunded in the form of a tax rebate.
GLOSSARY
222
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
VAT Recoverability Percent
The percent of VAT that’s recoverable.
VAT Registration Countries
Country codes associated with a VAT registration number for a particular customer or VAT
entity.
VAT Transaction Table
Stores detailed transaction information for VAT reporting. It is the primary source of
information for all VAT reports. Each application is responsible for writing to this table and
also to a cross-reference table used to link entries in the VAT transaction table with entries
within each application.
VAT Transaction Type
Used to categorize VAT transactions according to particular VAT accounting and reporting
requirements. The VAT code and the VAT transaction type are used in conjunction with the
VAT account type to obtain the ChartFields for accounting entries.
VAT Treatment
A description of how the transaction must be treated for VAT purposes. This is used to
determine how VAT defaults are applied, what accounting entries are required, and how and if
the transaction is reported on the VAT return.
VAT Use ID
A code used to identify the type of activity in which a purchased good or service will be used,
and therefore to determine a recoverability percent and a rebate percent (when applicable) that
will be applied to a transaction line. Activities are categorized as taxable, exempt, or mixed.
Where activity is mixed, you may associate either the ratio of taxable activity to exempt
activity directly with the Use ID, or you may indicate that this ratio is determined at the
ChartField level.
VdkVgwKey
A key within a Verity BIF file for every document to be indexed. VdkVgwKey values must
be unique across all collections that will be searched in any one application.
Vendor Draft
A draft issued by a vendor. PeopleSoft Receivables generates vendor drafts, provides a
flexible worksheet environment for approval management, and enables discounted or standard
submission for bank processing. PeopleSoft Payables receives vendor drafts and associates
the appropriate vouchers.
Verity
The third-party search engine integrated with the PeopleSoft Portal.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
223
GLOSSARY
Verity Fields
Verity fields are stored in the collection for retrieval and searching, and can be returned on a
results list. Fields are defined in the BIF file and stored in the collection for retrieval and
searching, and can be returned on a results list. Fields, like date and numeric fields can be used
with the comparison operators (<,<=,>,>=).
Verity Thesaurus
The custom thesaurus consists of lists of synonyms defined in a synonym control file and can
be used for synonym searching. After defining synonym lists in the control file, you use the
mksyd utility to create a custom thesaurus (a control file which has the .syd extension) that the
search engine uses.
Verity Topics
Verity applications can provide end users with predefined search criteria called topics. A
topic is a named object that represents a concept, or subject area and can be used for synonym
searching. It consists of words and phrases grouped together using the Verity query language
in a tree-like structure. When provided, topics can be shared by all users.
Verity Zones
Zones are specific regions of a document to which searches can be limited. When the zone
filter is used, the Verity engine builds zone information into the collection's full-word index.
The index, enhanced with zone information, permits quick and efficient searches over zones.
Searching a zone is faster than field searching. Zones are defined in the DAT file. The
contents of a zone cannot be returned in the results list of an application.
Version
There can be up to five budget versions for each Budget Center level in a Budgeting Model.
Budget versions are used to perform what-if analysis and comparisons of budget amounts
before the user selects one version to submit as the Budget Center’s budget plan. PeopleSoft
Budgeting-specific.
Vest Deferral Grace Period
The specified period of time within which an optionee must return from leave to avoid having
the vesting differed. Only applicable if the Stock Action is LOA. Suspend Vesting must be
selected for this rule to be applicable.
Vest Deferral Grace Period Service Rule
If the company provides a vest deferral grace period, they may stipulate that only certain
individuals are eligible for the grace period based on service with the company. Only
applicable if the Stock Action is LOA. Suspend Vesting must be selected for this rule to be
applicable.
GLOSSARY
224
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Vest Immediately
A stock option plan may provide that upon specific types of terminations, or upon a case by
case scenario, all unvested shares held by an individual can be made immediately vested as of
a specific date. Some companies' plans provide that under certain circumstances, such as
retirement, the vesting of option shares accelerates upon termination of employment. When
this occurs, you must modify the vesting schedule before you terminate the individual.
Vested Shares
Option shares that are free of any ownership restriction. Generally, vested exercised shares
are fully owned by the optionee, free from restrictions and freely tradable.
Vested Termination
The termination of an employee who has a vested benefit. The benefit is deferred until the
participant reaches retirement age. The employee is considered “Terminated Vested,” “Term
Vested,” or simply “TV.”
Vesting
The method by which a granted option becomes free of all restrictions and the Optionee has
full rights to the shares.
Vesting Schedule (Template)
A convenient way to set up the framework for a vesting schedule that can be uniformly
applied to individual options. When you grant stock options, you define a vesting schedule to
determine the default-vesting schedule for the option.
Vesting Service
The service used to determine an employee’s vesting percentage. Rules for accruing vesting
service may be different from rules for accruing other plan service credits.
VETS–100 Federal Contractor Report
This report is required of employers in the United States. It lists federal job classifications,
and the number of employees and new hires in the last 12 months who are special disabled
military veterans or Vietnam era military veterans. It also provides totals for each job
classification of both veterans and non-veterans who hold these jobs.
View
PeopleSoft Demand Planning,a multilevel forecast structure. Each view is associated with a
unique view ID and includes information that defines the view and structure type. The three
types of views are working, disbursement, and dynamic.
For PeopleSoft Budgeting see Budget View.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
225
GLOSSARY
Virtual Tasks
In Time and Labor, Virtual task data is associated with a taskgroup profile that defines
common characteristics for a given Taskgroup and Task Profile ID. A single row of data is
linked to multiple Earnings records for multiple employees. By minimizing the physical
storage of daily task data we provide enhanced performance without limiting its functionality.
Vision
In PeopleSoft Balanced Scorecard, the overall mission of an organization. Usually the highest
level on a strategy tree. Vision is optional; you aren’t required to have a vision component on
each strategy tree.
See also Strategy Tree
Volume
Total share volume traded in a stock during market hours.
W
WA (Workforce Analytics)
See PeopleSoft Workforce Analytics
Waiver Of An OPM Qualification Standard
Involves setting aside requirements in a published standard to place an employee in a
particular position, usually to avoid some kind of hardship to the employee, such as in cases of
RIF or administrative error on part of the agency. Extra training and/or skills development
may be needed to help the employee adjust to the new position. Waivers are granted by OPM
or an agency, as appropriate, on a case-by-case basis, and do not directly affect other positions
in the organization.
Warehouses
A warehouse reporting and analysis solution that supports the specific PeopleSoft business
application that warehouse is using. It consists of predefined ETL maps, data warehouse tools,
and Data Mart definitions. The warehouses are we deliver are: PeopleSoft Financials
Warehouse, PeopleSoft HRMS Warehouse, PeopleSoft CRM Warehouse, and PeopleSoft
Supply Chain Warehouse.
Warning Exception
A transaction that exceeds the available funds but is allowed to continue to be posted against
the budget. Warnings are informational only.
GLOSSARY
226
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Warrant
A type of security, usually issued together with a bond or preferred stock, that entitles the
holder to buy a proportionate amount of common stock at a specified price, usually higher
than the market price at the time of issuance, for a period of years or to perpetuity. A warrant
is usually issued as a sweetener, to enhance the marketability of the accompanying fixed
income securities. Warrants are freely transferable and are traded on the major exchanges.
WCB
In Canadian provinces the Worker’s Compensation Board (WCB) operates as an independent
board, and thus would have different requirements in each province. For example, in British
Columbia the organization is called the Worker’s Compensation Board of British Columbia
and in the Province of Quebec, the board is known as Commission de la SantГ© et de la SГ©curitГ©
du Travail (CSST).
Weight
In PeopleSoft Planning, a user-defined value for the constraints that can be violated,
determining how the schedules score will be calculated. Violations that are more critical to
your schedule merit a higher weight.
Weight and Volume Pricing
You can price shipments by weight or volume to create price prices. Weight and Volume
pricing requires using estimated shipments.
Weighted Average Cost of Funds
The projected principle payments for an instrument are used to derive a series of matched
maturity funding rates, which in turn are used to calculate the overall base PeopleSoft Funds
Transfer Pricing (FTP) rate. The Weighted Average Cost of Funds (WACF) method
calculates a weighted average FTP rate where each of the funding rates is weighted by the
principle payment amount and the term to maturity of the payment.
WFA (Workforce Analytics)
See PeopleSoft Workforce Analytics
WGI Due Date
Identifies the date of an employee's next within grade increase. Current policy is that the step
increase is implemented on this date automatically unless prevented by the processing of an
unsatisfactory performance appraisal.
WGI Non-Creditable Days
Total number of days that cause the WGI due date to be adjusted forward.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
227
GLOSSARY
Whole Calendar Month
An instruction telling the system to use every day in each month for this time period. The
system fills in the last day of the period according to the information you have entered.
Wildcard
You can replace the right-hand characters in a search field with a percent (%) wild card to
query a range of values beginning with the remaining, left-hand characters. For example, by
entering �2%’ in a six-character field, you will receive a range of available values, such as
200000 through 299999 or 2aaaaa through 2zzzzz.
Window Period
The ten-day period, from the third to twelfth day after public release of a company's financial
statement, when insiders may exercise their stock-appreciation rights without violating
Securities and Exchange Commission rules for short-term trading.
Windows Client
Traditional PeopleSoft 32-bit client. Windows clients connect to the application server domain
(Tuxedo) using a port number (or connection string) specified in PeopleSoft Configuration
Manager.
WIP Replenishment Method
Designates how the PeopleSoft Flow Production request is communicated. For a
replenishment method of Inventory, the Workflow, Pull Ticket, and Pull List replenishment
methods are available. With feeder line replenishment, you can only use Pull Tickets.
WIP Replenishment Mode
Determines how PeopleSoft Flow Production is triggered to generate a replenishment request
for an item. Replenishment options include Backflush, Manual, and Kanban Card.
WIP Replenishment Source
Determines where you send your PeopleSoft Flow Production replenishment request and what
source supplies your WIP location. Options include Feeder, Inventory, and Vendor.
Withdrawal
An election not to continue participation in a stock purchase plan.
Withdrawal of Contributions
In a pension plan, the act of returning pension contributions, with interest, to an employee who
is terminating. An employee who withdraws contributions typically forfeits all service
associated with those contributions. If the employee is later rehired, repayment of
contributions and interest typically reinstates the forfeited service.
GLOSSARY
228
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
Withholding
A deduction taken by employers out of taxable income of an individual. Typical withholding
taxes include federal income taxes, federal social security, Medicare taxes, and state and local
income taxes.
Within Grade Increase (WGI)
A longevity-based increase in salary based on predetermined time in grade requirements and
acceptable performance.
Work Council (ComitГ© d'Enterprise)
In France it is mandatory for companies with more than 50 employees to elect a Work Council
to represent the employees in negotiations with management.
Work Effort
See Activity Type.
Worker
In PeopleSoft Workforce Analytics, workers are defined as anyone who performs functions
for the organization, and receives compensation from the organization's operating expense
funds in return. Workers can be direct employees or independent contractors. This includes
individuals contracting business directly from the company or through an agency.
Work Group
In PeopleSoft Enterprise Performance Management, the work group is a grouping of
employees that share a similar activity profile.
Work Period
A Days On/Days Off template; the smallest unit of time that a business uses to communicate
with their employees regarding when to be and/or not to be at work (that is, time working and
time not working). The work period can be any number of hours. Until clock hour reporting
is implemented, the application does not care about the number of hours. The initial Time and
Labor product will apply the work period to a calendar day.
Work Queue
In PeopleSoft Demand Planning and Inventory Planning, a feature for reviewing and working
with exceptions created during the processing of forecasting and inventory data.
Work Schedule
A template consisting of a sequence of work periods (days) on and off, and the number of
scheduled hours per work period. Work Schedules and Work Periods should not be confused
with calendar days.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
229
GLOSSARY
Worksheet
A way of presenting data to the user through a BAM interface that enables users to do in-depth
analysis using pivoting tables, charts, notes, and history information.
Work Templates
Work templates describe your employee’s work patterns. Work templates could apply to
individuals or entire organizations. For instance, 9 AM to 5 PM, Monday through Friday is a
fairly standard working week in organizations.
Workday
A 24-hour period rounded by daybreaker with one or more associated shifts (see Scheduling)
Workday Override
A function that allows a Time Manager to override a Time Reporter’s schedule for a single
workday. For example, Jane’s long-term schedule assignment is Monday – Friday, 8.00 to
17.00. Due to an increase in production demand, her manager needs to schedule her to work
7.00 to 18.00 on Thursday, 16 March 2000. Her manager needs to be able to make this
change to her schedule in the PeopleSoft Time and Labor system, so when Jane checks her
schedule for this week, she’ll see the revised schedule.
Worker
Workers can be defined as anyone who performs functions for the organization and receives
compensation from the organization's operating expense funds in return. Workers can be
direct employees or independent contractors (includes individuals contracting business
directly from the company or through an agency).
Workers Compensation
The days an employee is on LWOP due to sustaining an injury or illness while on the job.
Workflow
The background process that creates a list of administrative actions based on your selection
criteria and specifies the procedure associated with each action.
Workflow
The background process that creates a list of administrative actions based on your selection
criteria and specifies the procedure associated with each action.
Workforce Monthly Report (DГ©claration Mensuelle Obligatoire des Mouvements de Main
D’oeuvre)
In France, companies that employ 50 or more employees are required to submit the Workforce
Monthly Report to the Administrative Division of the Ministry of Work and Social Relations.
The report contains workforce information for a given establishment of a company, including
GLOSSARY
230
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
the total number of employees and details of employees who have joined or left the
establishment during the month.
Workgroup
A user-defined group of employees who share identical compensation rules. A workgroup
may be equivalent to all the employees in a business enterprise, all employees in a Paygroup,
all employees belonging to the same Union or Union Local, or all employees who work at a
specific work location.
Worklist
The automated "to do" list that Workflow creates. From the Worklist you can directly access
the panels you need to perform the next action, and then return to the Worklist for another
item.
Worklist
The automated “to do” list which Workflow creates. From the worklist you can directly
access the pages you need to perform the next action, and then return to the worklist for
another item.
Works Councils (Betriebsrat)
In Germany, the works councils for your company are internal committees elected by the
employees that represent the interests of salaried and hourly paid employees, other than
management. Every work location in your company has it's works council (this would be the
local works council) and the company as a whole has a central works council.
Work-Study Program
Government or non-government programs supervised work experience related to a student's
course of study and are a part of, or a supplement to, education. Federal student-trainee
programs are examples of such programs.
X
Y
Yearly Maximum Pensionable Earnings (YMPE)
Amount set by the government upon which Canadian Pension Plan (CPP) contributions are
made.
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
GLOSSARY
231
GLOSSARY
Z
Zero-Based Budgeting
A budgeting option that builds a budget from the ground up starting with zero values. This is
in contrast to an incremental budget that is based upon using prior year actual or budget values
as starting point. PeopleSoft Budgeting-specific.
Zero-Rated VAT
A VAT transaction with a VAT code that has a tax percent of zero. Used to track taxable
VAT activity where no actual VAT amount is charged.
Zip Code
The term for postal codes in the United States.
GLOSSARY
232
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
Index
A
B
Accounting Defaults page 4-13
Add Nodes to Chunk Rules page 14-10
Administer Procurement Main page 2-2
Administer Procurement Menu Items Table page
2-8
administration
configuring Administer Procurement Main page
2-8
configuring Buyer Station 2-9
configuring eProcurement Homepage 2-9
maintain procurement 2-15
pages used 2-2
procurement options 2-20
system users and roles 2-13
administration pages
configuring 2-6
pages used to configure 2-6
advance search options
using 4-18
application messages
setting full table publish rules for eProcurement
17-6
setting incremental table publish rules for
eProcurement 17-5
setting up PeopleSoft HRMS to eProcurement
17-4
approval steps
skipping 3-9
stopping 3-9
Asset Management Information page 16-8
Assign Catalog to Business Unit page 2-21
associating item categories with returned values
pages used 8-8
attachments
enabling 2-10
pages used to setup 2-10
requisitions 4-26
Attribute Name Cross Reference Page 18-16
attributes
importing 18-12
importing from a flat file 18-13
verifying 18-15
working with 18-12
Attributes Staging Table Page 18-15
Auto Reconcile process
defining parameters 11-6
Auto Reconcile process page 11-14
bar graphs
displaying 13-15
generating 13-15
PO Status Analysis Graph 13-11
PO Value Analysis Graph 13-12
Requisition Status Analysis Graph 13-13
using 13-11
Value Frequency Analysis Graph 13-14
Batch Publish Rules page 14-10
batch publishing rules
defining 14-10
Build Verity Collection page 18-7
business card
entering orders 9-5
pages used to create express orders 9-5
Business Card Express Form page 9-5
business units
maintaining 2-15
pages used to maintain 2-15
business units, SetIDs, and record groups
associating 2-18
buyer station
managing purchase orders 13-3, 13-5
overview 13-1
reviewing requisitions created by employees
13-4
using 13-1
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
C
Cardholder Profile - Card Data page 3-4
Catalog Item Usage Report 20-5
change orders 15-1, 15-10
pages used to process 15-11
change request approval workflow 3-7
Change Request Details page 15-9
Change Request Header page 15-5
Change Request Justification Comments page
5
Change Request Line page 15-5
Change Request Shipping page 15-6
change requests 15-1
adding 15-3
approval 15-8, 15-9
converting to change order 15-10
creating 15-3
entering 15-5
15-
INDEX
1
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
entering a reason for 15-5
entering changes to a line 15-5
entering changes to shipping information 15-6
justifications 15-5
monitoring 15-7
overview 15-1
pages used to add 15-4
pages used to approve 15-8
pages used to process 15-11
pages used to view 15-7
review 15-9
setting up workflow for approvals 3-7
viewing 15-6, 15-7
workflow 3-7
Change Requests Inquiry page 15-7
Change Requests List page 15-7
Change Requests Pending Approval page 15-9
ChartFields
account defined iv
affliliate, defined vi
alternate account, defined iv
delivered fields iv
department, defined iv
operating unit, defined iv
product, defined v
project ID, defined v
scenario, defined vi
statistics code, defined vi
chunk rules
assigning to vendors 14-10
mapping nodes 14-10
codes
maintaining 2-19
Cohera Catalog Management Integration 19-1
configuring the connection 19-4
integrating with PeopleSoft eProcurement 19-3
overview 19-1
pages used to integrate with PeopleSoft
eProcurement 19-3
prerequisites 19-2
setting up the database connection 19-4
Cohera catalogs
loading 19-8
loading into PeopleSoft eProcurement 19-5
pages used to load catalogs into PeopleSoft
eProcurement 19-6
Cohera categories
importing 19-7
Cohera tables
extracting data 19-7
configuring
administration pages 2-6
Buyer Station page 2-9
eProcurement Homepage 2-9
CUP Item Categories page 10-20
CUP Item Status page 10-19
INDEX
2
D
Direct Connect Supplier Integration 8-1
editing merchant information 8-7
overview 8-1
pages used to setup 8-2
setting up 8-2
using Punchout 8-9
dispatching purchase orders
overview 14-1
pages used 14-3
sending to vendors 14-4
display graphs
pages used 13-15
Distribution Information page 4-24
E
Edit CUP Item Categories page 10-18
editing merchant information
pages used 8-8
eProcurement administration
overview 2-1
using 2-1
eProcurement Installation Options page 2-11
eProcurement Main Page Administration page 2-9
eProcurement Role Actions page 2-14
Export CUP Data Process page 10-16
express forms
creating 9-1
creating profiles 9-2
designing 9-1, 9-3
overview 9-1
pages used to create 9-2
using 9-4
F
Favorites
adding items to list 5-1
adding items to requisition 5-3
adding items to your list 5-2
deleting items from list 5-1, 5-3
reviewing items in list 5-3
using 5-1
fields, common descriptions i
file server locations
defining 2-11
fixed cost service 7-4
G
General Ledger Definition page
generate graphs
pages used 13-15
2-19
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
Generate Serial Numbers page 16-10
Generate Tag Numbers page 16-9
Ghost Card Vendor Setup page 11-7
ghost cards 11-7
defining 11-7
overview 11-2
I
Import Attributes Page 18-13
Import Cohera Categories page 19-7
Import Item Catalog page 19-8
Import Items Catalogs page 10-17
Importing and working with attributes
pages used 18-12
inquiries
pages used 13-11
Inquiries and Reports page 13-11
installation options
pages used to setup 2-10
setting up 2-10
Inventory Putaway Information page 16-10
item definitions
pages used 13-10
Item Description page 4-8
item searches
implementing attribute searches 18-8
overview 18-1
item tables
pages used 13-10
item templates
adding to a requisition 6-5
creating 6-2
creating presonal templates 6-2
deleting 6-3
overview 6-1
pages used to create 6-2
using 6-4
items
accessing tables 13-10
adding asset information 16-8
browsing 4-15
checking price and availability 4-8
downloading attachments 10-22
pages used to search for 4-14
reviewing asset information 16-8
reviewing information 4-8
searching 4-15
searching for 4-14
items to receive
selecting 16-6
J
Justification/Summary page
PEOPLESOFT PROPRIETARY
AND
EPROCUREMENT
PEOPLEBOOK
L
Line Comments page 4-26
Line Details page 12-6
Line Details Page 4-25
line information
pages used to edit 4-21
Linked Supplier Setup page 10-6, 19-5
Linking buyer tasks
pages used 13-3
Load Staged Items page 10-21
M
Maintain Express Forms Profiles page 9-2
Maintain The Administration Page page 2-7
Maintain Vendor Hyperlinks page 2-23
manage approvals
prerequisites 12-8
Manage Approvals page 12-7
Manage Favorites page 5-3
Manage Purchase Orders page 13-4
Manage Requisition page 12-4
Manage Templates page 6-3
managing your favorite list
pages used 5-2
MarketPlace
loading catalogs items into PeopleSoft
eProcurement 10-9
pages used to integrate with PeopleSoft
eProcurement 10-4
pages used to load catalogs items into PeopleSoft
eProcurement 10-11
sending purchase orders 10-24
setting up buyers 10-6
setting up connection 10-5
setting up suppliers 10-6
MarketPlace and PeopleSoft eProcurement
Integration 10-4
overview 10-1
prerequisites 10-3
using 10-1
MarketPlace Buyers 10-9
MarketPlace items
loading into PeopleSoft eProcurement tables
10-20
MarketSite CUP file
exporting data from 10-14
merchant profile component 8-5
Merchant Value Cross - Reference page 8-8
Message Monitor Component 14-11
pages used 14-12
using 14-11
4-11
CONFIDENTIAL
INDEX
3
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
N
New Requisition page
4-6, 4-7
O
One Time Shipping Information page
4-23
P
PeopleBooks
printed, ordering ix
PeopleSoft eProcurement
business processes 1-1
features 1-1
getting started 1-1
implementing 1-2
setting up additional application tables 1-6
setting up core application tables 1-4
setting up global application tables 1-2
PeopleSoft eProcurement administration 2-1
PeopleSoft eProcurement reports 20-1
general description 20-1
PeopleSoft eProcurement requisition approval
workflow
configuring 3-18
PeopleSoft eProcurement workflow builder 3-15
pages used to configure 3-16
using 3-17
PeopleSoft General Ledger business units
defining 2-19
PeopleSoft HRMS
integrating with 17-1
overview 17-1
preparing to use 17-3
setting up to eProcurement synchronization
application messages 17-4
PeopleSoft workflow
configuring 3-2
configuring with eProcurement 3-8
using 3-2
Personal Data page 11-6
personal templates
creating 6-2
deleting 6-3
using 6-6
PO Dispatch Message log page 14-5
PO Item Category Usage Report 20-5
PO Lines Dispatch Message Log page 14-7
power user 16-15
Preface i
price and availability check
using 10-23
Process MarketPlace Orders process page 10-26
Procurement Analysis page 13-15
INDEX
4
Procurement Card Provider
setting up 11-5
Procurement Card Reconciliation Setup page 11-6
procurement card request workflow 3-7
procurement cards
file layout of transactions 11-5
ghost cards 11-7
loading transactions 11-14
overview 11-1
pages used 11-3
processing transactions 11-10
reconciling charges 11-14
requesting a procurement card 11-7
running processes 11-13
setting up 11-2
setting up card issuer 11-5
setting up users 11-6
status of statement lines 11-13
using 11-1
using on requisitions 11-8
procurement options
maintaining 2-20
Procurement Setup Guide - Default page 2-6
publish/subscribe rules
setting full table publish rules for eProcurement
17-6
setting incremental table publish rules for
eProcurement 17-5
Publisher page 14-4
Purchase Order Dispatcher page 14-4
purchase orders
changing staged details 13-5
dispatching 14-1, 14-3
managing 13-4
pages used to manage 13-3
pages used to send orders to vendors by EDX
14-8
prerequisites for sending to vendors by EDX
14-7
publishing messages 14-11
reviewing 13-5
selecting manually for dispatch 14-4
sending to vendors by EDX 14-7
viewing messages 14-5
viewing messages entered on PO line 14-7
viewing status 14-5
XML format, dispatching in 14-4
purchasing business units
assigning catalogs 2-21
purchasing codes
defining 2-19
pages used to define 2-19
Purchasing Definition - Business Unit Definition
page 2-18
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
Q
quick sourcer 13-6
pages used 13-7
using 13-6
Quick Sourcer – Autosource Parameters page
7
Quick Sourcer – Purchase Order Values page
8
1313-
R
receipt
adding 16-6
changing 16-6
viewing records 16-11
receipt notification workflow
setting up 3-4
using 3-4, 3-5
Receipts For a Casual User page 16-11, 16-15
Receipts For a Power User page 16-18
Receive page 16-6
receiving
overview 16-1
pages used to return items to vendor 16-13
putaway 16-10
rejecting items 16-8
return to vendor (RTV) 16-12, 16-13
serial IDs 16-10
tag numbers 16-9
user types 16-2
receiving by amount 16-2
receiving stock 16-1
as a casual user 16-3
as a power user 16-15
receiving stock as a casual user
pages used 16-4
receiving stock as a power user
pages used 16-16
Reject Shipment page 16-8
reports
description 20-1
pages used 13-11
Request Procurement Card page 11-7
requesting a procurement card 3-7
Requisition Approval page 3-21
requisition approval workflow 3-18
requisition cost distribution
editing 4-24
Requisition Defaults page 4-9
Requisition Expediter page 13-4
Requisition Line Comments page 4-28
requisition navigator 4-11
Requisition Summary Page 4-7
requisitions
adding attachments 4-26
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
EPROCUREMENT
PEOPLEBOOK
adding favorite items 5-3
adding justifications 4-11
adding line comments 4-26
approving 12-7
changing shipping information 4-23
creating 4-1, 4-4, 4-24, 4-26
creating One-Time shipping address 4-23
creating with Punchout 8-10
defaults, vendor search 7-6
editing 4-1
editing defaults 4-9
editing line details 4-25
editing line information 4-21
express forms 9-4
favorites 5-1
maintaining 12-3, 12-4
managing 12-1
overview 4-1, 12-1
pages used to add attachments 4-27
pages used to add favorite items 5-3
pages used to approve 12-7
pages used to configure approval workflow 320
pages used to create 4-4
pages used to create from item templates 6-4
pages used to create requisitions with the
requisition navigator 4-12
pages used to maintain 12-3
procurement cards 11-8
special requests 7-1
suggest a vendor 7-7
using item templates 6-1, 6-4, 6-5
viewing additional approvals 3-22
viewing details 12-5
viewing line details 12-6
working with 12-1
Requisitions Details page 12-5
return to vendor
using exchange workflow 3-6
return to vendor (RTV) 16-1
return to vendor exchange workflow 3-6
Return to Vendor page 16-13
returned values
associating item categories 8-8
role users
attaching role actions 2-14
Run Initialize Workflow Process Page 3-20
running processes for Procurement Card transactions
pages used 11-14
S
Search Catalog - Advance Search page
Search Catalog - Item Description page
Search Catalog page 4-15
Select Items to Receive page 16-6
4-18
4-20
INDEX
5
PEOPLESOFT 8.4
EPROCUREMENT
PEOPLEBOOK
Select Purchase Order for Change Request page
15-5
sending PeopleSoft eProcurement purchase orders to
MarketPlace
pages used 10-26
setup guides
pages used 2-5
using 2-4
Setup Instructions for Return to Vendor page 2-22
Setup Vendors to Nodes page 14-10
shared data
synchronizing 8-6
Shipping Defaults page 4-13
Shipping Information page 4-23
special goods
pages used to request 7-3
requesting 7-2
Special Request - Fixed Cost Service page 7-4
Special Request - Service page 7-4
Special Request - Time and Material (Materials)
page 7-5
Special Request - Variable Cost page 7-5
special requests
fixed cost services 7-4
overview 7-1
services 7-4
suggesting a vendor 7-7
time and materials 7-5
using 7-1, 7-2
variable cost services 7-5
vendor search 7-6
special services
pages used to request 7-3
requesting 7-3
Suggest a Vendor page 7-7
Suggested Vendor page 13-6
supplier
contacting for autentication data 8-4
Supplier & Item Catalog page 13-10
system users and roles
maintaining 2-13
pages used to maintain 2-13
T
TableSet Record Group Controls page 2-18
Template Name (Company) page 6-6
Template Name (Personal) page 6-6
time and materials service 7-4
Tuxedo IPC Helper Service
configuring for multiple NT servers 18-6
U
URL Maintenance page 2-11, 4-28
USBank Data Retrieval process page
INDEX
6
11-14
Use Templates page
Using Favorites
overview 5-1
6-5
V
Validate and Process Imported Items page 10-18,
19-8
variable cost service 7-4
Vendor Address page 16-14
Vendor Search page 7-6
vendor tables
pages used 13-10
vendors
accessing tables 13-10
adding definitions 8-4
maintaining 2-22
pages used to maintain 2-22
pages used to search and suggest 7-6
reviewing suggestions 13-6
searching for 7-5, 7-6
setting up third parties 8-4
suggesting a new vendor 7-5, 7-7
Verity search collection
creating and updating 18-7
pages used to create and update the collection
18-7
Verity search engine
enabling 18-3
implementing 18-1
incremental updates 18-2
Verity search update
setting up and running the Daemon program
18-8
W
wireless workflow approver
using 12-8
workflow
change request approval 3-7
change request approval, setting up 3-7
defining workflow rule steps 3-12
defining workflow rules 3-11
defining workflow step criteria 3-13
in eProcurement 3-1
overview 3-1
pages used to configure 3-3
pages used to configure PeopleSoft Workflow
with PeopleSoft eProcurement 3-11
pages used to configure requisition approval 320
PeopleSoft 3-1
PeopleSoft eProcurement 3-2
procurement card request 3-7
receipt notification workflow 16-2
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
PEOPLESOFT 8.4
workflow dynamic rules 3-9
Workflow Notification Process Page 3-21
workflow processes in PeopleSoft eProcurement
3-1
Workflow Rule Assignment Page 3-12, 3-14
PEOPLESOFT PROPRIETARY
AND
CONFIDENTIAL
EPROCUREMENT
PEOPLEBOOK
workflow rule assignments
defining 3-14
Workflow Rules Page 3-11
Workflow Step Criteria Page 3-13
INDEX
7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement