www.LarsonElectronics.com Catalog

www.LarsonElectronics.com Catalog
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Category:
LED Lights w/ U-Bracket Mount
11/18/2014
Page: 1
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Light Plant LED Conversion Kit - Retrofit (4) 1000 Watt Metal Halide Light Towers to LED
Part #: LEDCVK-6X320
Price: $17,379.88
11/18/2014
Page: 2
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
High Intensity Colored LED Light - 390 Watts - 90 LEDs - Red, Amber, Green, Blue - 120-277V AC
Part #: LEDP5W-90XC-1227
Price: $3,906.77
11/18/2014
Page: 3
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The LEDP5W-90XC-1227 LED Light offers high output from a compact form factor and is ideal for use in mining applications as well as
heavy equipment, hunting, boating, vehicle, military, law enforcement and industrial manufacturing uses. A 27,120 lumen output, 3.27
amp draw, 50,000 hour service life, multiple light output color choices, and 120 to 277 volt compatibility provides operators with a
rugged and powerful LED alternative to 1000 watt metal halide lamps that uses little power and can withstand rugged use and abusive
conditions.
The LEDP5W-90XC-1227 LED light from Larson Electronics produces 27,120 lumens of high intensity light while drawing only 390 watts @3.27
amps from a 120 volt AC electrical system. Ninety CREE XLamp XPGВ® LEDs producing 301 lumens each are arranged in rows and paired with
high purity optics to produce a well focused 25 degree spot beam that is ideal for providing far reaching concentrated illumination while still
covering a substantial amount of area. We also offer optional floodlight versions with a 60 degree beam spread to provide more light over a larger
area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. These LED light bars are waterproof to 3 meters,
sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding environments, conditions and
applications.
LEDP5W-90XC-1227 lights are ideal replacements for fragile and hot running 1000 watt metal halide lamps. They offer Pulse Width Modulation
control, a small profile, low power requirements, high durability and a versatile mounting system that makes these LED light emitters a superior
lighting solution for rough applications where power and reliability is critical. This LED fixture is offered in red, blue, green, amber, or white light
output. The heavy duty design and high power of these LED lights also makes them suitable for a wide array of applications including but not
limited to: military, industrial manufacturing, machine visioning, mining, security and law enforcement, boating, vehicles and commercial structure
illumination.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of
light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on
or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to automatically monitor and
adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDP5W-90XC-1227
series light bars can operate on current ranging from 120 to 277V AC without any modifications necessary as a result. This ability to sense and
adjust input current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise
result in burning up or premature LED failure without it.
Durability: As well as unparalleled heat control, the LEDP5W-90XC-1227 series of LED lights from Larson Electronics also offer IP68 rated
construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature
changes of -40 degrees Celsius to 80 degrees Celsius, are waterproof to three meters, and resist ingress of dust, dirt and humidity. The housings
are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XPGВ® LEDs help these units achieve
15.6Grms rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend these LED lights
for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.
Mounting: Each unit is equipped with an innovative trunnion style mounting bracket that allows the light to be attached to flat surfaces and
adjusted through 360 degrees of vertical movement. To adjust the unit after mounting, the user simply loosens the thumb screws located on
either side of the unit, moves it into the desired position, then re-tightens the screws. The base of the mounting trunnion is equipped with several
machined slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning.
11/18/2014
Page: 4
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDP5W-90XC-1227 High Output LED Light
Internal LED Driver Features
Lamp Type: CREE XLamp-XPGВ® LED
Automatic Current Sensing and Adjusting 9-32VDC
Dimensions: 36 "-L 7.54"-H 4.94"-D
Active Heat Management
Watts: 390
Ambient Op Temp -40C to +80C
Led Drive %: 90%
IP68 Tested to 3 Meters
Voltage: 120-277 VAC
Lighting Configuration: 25В° Spot or 60В° Flood
Mounting: Flat Surface 360 Degree Adjustable
Wiring: 6" cable terminated in cord cap
Cord Cap: 5-15 Wall Plug, L5-15 twist-lock, L6-15 twist-lock, Schuko
Amps: 3.27 (on 120 volts)
Lumens: 27,120 (white)
LED Light Color: White, Red, Amber, Blue, Green
LED Life Expectancy: 50,000 hours
Special Orders- Requirements
Optics Efficiency: 90%
Contact us for special requirements
Materials: Aluminum Housing, Polycarbonate Lens
Toll Free: 1-800-369-6671
Housing Colors: Black
Intl: 1-903-498-3363
Weight: 38.57 Lbs
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 5
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
600 Watt High Intensity LED Light - 78,000 Lumens - 120-277V AC - High Mast Lighting - Outdoor Rated
Part #: GAU-LTL-600W-LED
Price: $3,100.00
11/18/2014
Page: 6
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 7
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
300 Watt LED Pole Top Light Fixture - 120-277VAC - 1000W Metal Halide Equivalent - Slip Fit Yoke
Part #: GAU-PT-60X5W-ACS-1227
Price: $2,832.01
11/18/2014
Page: 8
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in the USA
The GAU-PT-60X5W-ACS-1227 High Output LED Pole Top Light with Photocell offers high output and energy efficient alternative to
traditional general area luminaries. LED technology and compact design makes this lamp an excellent energy efficient upgrade option
for bulky and high maintenance cost older fixtures. A 29,580 lumen output, 2.5 amp draw, 50,000 hour service life, and 120-277 volt
compatibility provides mine operators with a rugged and powerful LED alternative to 1000 watt metal halide lamps that uses little
power and can withstand rugged use and abusive conditions.
The GAU-PT-60X5W-ACS-1227 LED slip fitter light from Larson Electronics produces 29,580 lumens of high intensity light while drawing only
300 watts @2.5 amps from a 120 volt electrical system. Sixty CREE XLamp XPGВ® five watt LEDs producing 493 lumens each are arranged in
rows and paired with high purity optics to produce a well focused 25 degree spot beam that is ideal for providing far reaching concentrated
illumination while still covering a substantial amount of area. We also offer optional floodlight versions with a 60 degree beam spread to provide
more light over a larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. These LED light bars are
waterproof to 3 meters, sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding mining
environments, conditions and applications.
GAU-PT-60X5W-ACS-1227 LED lights are ideal replacements for fragile and hot running 1000 watt metal halide lamps. They offer Pulse Width
Modulation control, a small profile, low power requirements, high durability and a versatile mounting system that makes these LED light emitters
a superior lighting solution for mining applications where power and reliability is critical. The heavy duty design and high power of these mining
lights also makes them suitable for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning,
security and law enforcement, and commercial structure illumination.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 9
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers
which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics
and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty
cycle” accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate
to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the
current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or
visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs
are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000
hours.
PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to automatically monitor and
adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These GAU-PT-60X5W-ACS1227 high bay lights can operate on 120V AC or a current ranging from 208Y to 277V AC without any modifications necessary as a result. This
ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems
which would otherwise result in burning up or premature LED failure without it. The built in photocell allows for automatic operation, during the
floodlight on when the ambient light reaches below 3 footcandles.
Durability: As well as unparalleled heat control, the GAU-PT-60X5W-ACS-1227 series of LED high bay lights from Larson Electronics also offer
IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid
temperature changes of -40 degrees Celsius to 80 degrees Celsius, are waterproof to three meters, and resist ingress of dust, dirt and humidity.
The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XPGВ® LEDs help these
units achieve 15.6Grms rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend
these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.
Mounting: Each unit is equipped with an innovative trunnion style mounting bracket and is attached to a slip fit yoke for
easy installation. The slip fit yoke is built to customer's specs, enabling operators to mount this explosion proof LED light
to their specific pole size. For example, selecting a 2" OD mount means that the yoke mount will fit onto pipes or bull
horns with a 2" OD. The wiring of the GAU-PT-60X5W-ACS-1227 is terminated in flying leads, held in place with a cord
grip. To adjust the unit after mounting, the user simply loosens the thumb screws located on either side of the unit, moves
it into the desired position, then retightens the screws. The base of the mounting trunnion is equipped with several
machined slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning.
CONDITIONS
Vin min (V) = 9
toff (us) = 2.9
Vin nom (V) = 12
R1 (kohm) = 50.2
Vin max (V) = 50
L1 (uH) = 3.0
Vo min (V) = 6.5
L-Pk (A) = 2.9
Vo nom (V) = 6.8
L-rms (A) = 2.9
Vo max (V) = 7
Ipk (A) = 2.5
I-LED (A) = 2.2
R2 (ohm) = 0.10
Efficiency = .85
I-FET (A) = 2.2
fsw nom (kHz) = 150
fs min (kHz) = 77
Ts nom (us) = 6.666667
fs max (kHz) = 301
Base frequency-
= 36~37Khz @ 12V
Amplitude of pulse width-
= 27Ms
Outside: External dimmer-
= 500Hz
Inside : Current sensing from-
77KHz at 12V to 300KHz at 50V
11/18/2014
Page: 10
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
GAU-PT-60X5W-ACS-1227
Internal LED Driver Features
Lamp Type: CREE XLamp-XPGВ® LED
Automatic Current Sensing and Adjusting 12/24VDC
Dimensions: 22.69 "-L 22.69"-H 4.94"-D
Active Heat Management
Watts: 300
Ambient Op Temp -40C to +80C
Led Drive %: 90%
Adjustable Mounting
Voltage:120V or 208Y-277V AC 50/60 Hz
IP68 Waterproof - Tested to 3 Meters
Lighting Configuration: 60В° Flood or 25В° Spot
Slip Fit Yoke Mount
Mounting: Slip Fit Yoke Mount w/ Adjustable Bracket
Wiring: Flying leads
Amps: 2.5 (on 120 volts)
Lumens: 29,580
LED Light Color: White
LED Life Expectancy: 50,000 hours
Special Orders- Requirements
Optics Efficiency: 90%
Contact us for special requirements
Materials: Aluminum Housing, Polycarbonate Lens
Toll Free: 1-800-369-6671
Housing Colors: Black
Intl: 1-903-498-3363
Weight: 35 Lbs
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 11
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
300 Watt LED Pole Top Light Fixture - 120-277VAC - 1000W Metal Halide Equivalent - Slip Fit Yoke
Part #: GAU-PT-60X5W-1227
Price: $2,832.01
11/18/2014
Page: 12
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in the USA
The GAU-PT-60X5W-1227 High Output LED Pole Top Light with Photocell offers high output and energy efficient alternative to
traditional general area luminaries. LED technology and compact design makes this lamp an excellent energy efficient upgrade option
for bulky and high maintenance cost older fixtures. A 29,580 lumen output, 2.5 amp draw, 50,000 hour service life, and 120-277 volt
compatibility provides mine operators with a rugged and powerful LED alternative to 1000 watt metal halide lamps that uses little
power and can withstand rugged use and abusive conditions.
The GAU-PT-60X5W-1227 LED slip fitter light from Larson Electronics produces 29,580 lumens of high intensity light while drawing only 300
watts @2.5 amps from a 120 volt electrical system. Sixty CREE XLamp XPGВ® five watt LEDs producing 493 lumens each are arranged in rows
and paired with high purity optics to produce a well focused 25 degree spot beam that is ideal for providing far reaching concentrated illumination
while still covering a substantial amount of area. We also offer optional floodlight versions with a 60 degree beam spread to provide more light
over a larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. These LED light bars are waterproof
to 3 meters, sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding mining environments,
conditions and applications.
GAU-PT-60X5W-1227 LED lights are ideal replacements for fragile and hot running 1000 watt metal halide lamps. They offer Pulse Width
Modulation control, a small profile, low power requirements, high durability and a versatile mounting system that makes these LED light emitters
a superior lighting solution for mining applications where power and reliability is critical. The heavy duty design and high power of these mining
lights also makes them suitable for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning,
security and law enforcement, and commercial structure illumination.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 13
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of
light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on
or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to automatically monitor and
adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These GAU-PT-60X5W-1227
high bay lights can operate on 120V AC or a current ranging from 208Y to 277V AC without any modifications necessary as a result. This ability
to sense and adjust input current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which
would otherwise result in burning up or premature LED failure without it. The built in photocell allows for automatic operation, during the floodlight
on when the ambient light reaches below 3 footcandles.
Durability: As well as unparalleled heat control, the GAU-PT-60X5W-1227 series of LED high bay lights from Larson Electronics also offer IP68
rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid
temperature changes of -40 degrees Celsius to 80 degrees Celsius, are waterproof to three meters, and resist ingress of dust, dirt and humidity.
The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XPGВ® LEDs help these
units achieve 15.6Grms rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend
these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.
Mounting: Each unit is equipped with an innovative trunnion style mounting bracket and is attached to a slip fit yoke for easy installation. The slip
fit yoke is built to customer's specs, enabling operators to mount this explosion proof LED light to their specific pole size. For example, selecting a
2" OD mount means that the yoke mount will fit onto pipes or bull horns with a 2" OD. The wiring of the GAU-PT-60X5W-1227 is terminated in
flying leads, held in place with a cord grip. To adjust the unit after mounting, the user simply loosens the thumb screws located on either side of
the unit, moves it into the desired position, then retightens the screws. The base of the mounting trunnion is equipped with several machined
slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning.
CONDITIONS
Vin min (V) = 9
toff (us) = 2.9
Vin nom (V) = 12
R1 (kohm) = 50.2
Vin max (V) = 50
L1 (uH) = 3.0
Vo min (V) = 6.5
L-Pk (A) = 2.9
Vo nom (V) = 6.8
L-rms (A) = 2.9
Vo max (V) = 7
Ipk (A) = 2.5
I-LED (A) = 2.2
R2 (ohm) = 0.10
Efficiency = .85
I-FET (A) = 2.2
fsw nom (kHz) = 150
fs min (kHz) = 77
Ts nom (us) = 6.666667
fs max (kHz) = 301
Base frequency-
= 36~37Khz @ 12V
Amplitude of pulse width-
= 27Ms
Outside: External dimmer-
= 500Hz
Inside : Current sensing from-
77KHz at 12V to 300KHz at 50V
11/18/2014
Page: 14
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
GAU-PT-60X5W-1227
Internal LED Driver Features
Lamp Type: CREE XLamp-XPGВ® LED
Automatic Current Sensing and Adjusting 12/24VDC
Dimensions: 22.69 "-L 22.69"-H 4.94"-D
Active Heat Management
Watts: 300
Ambient Op Temp -40C to +80C
Led Drive %: 90%
Adjustable Mounting
Voltage:120V or 208Y-277V AC 50/60 Hz
IP68 Waterproof - Tested to 3 Meters
Lighting Configuration: 60В° Flood or 25В° Spot
Slip Fit Yoke Mount
Mounting: Slip Fit Yoke Mount w/ Adjustable Bracket
Wiring: Flying leads
Amps: 2.5 (on 120 volts)
Lumens: 29,580
LED Light Color: White
LED Life Expectancy: 50,000 hours
Special Orders- Requirements
Optics Efficiency: 90%
Contact us for special requirements
Materials: Aluminum Housing, Polycarbonate Lens
Toll Free: 1-800-369-6671
Housing Colors: Black
Intl: 1-903-498-3363
Weight: 35 Lbs
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 15
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
300 Watt LED Crane & Rough Service Fixture - 480V AC - 1000W Metal Halide Equivalent - 29,580 Lumens
Part #: GAU-HB-60X5W-480V
Price: $2,760.78
11/18/2014
Page: 16
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The GAU-HB-60X5W-480V High Output Crane and Rough Service LED Light offers high output and energy efficient alternative to
traditional general area luminaries. LED technology and compact design makes this lamp an excellent energy efficient upgrade option
for bulky and high maintenance cost older fixtures. A 29,580 lumen output, 0.7 amp draw, 50,000 hour service life, and 480 volt
compatibility provides mine operators with a rugged and powerful LED alternative to 1000 watt metal halide lamps that uses little
power and can withstand rugged use and abusive conditions.
The GAU-HB-60X5W-480V crane and rough service LED light from Larson Electronics produces 29,580 lumens of high intensity light while
drawing only 300 watts @0.7 amps from a 480 volt electrical system. Sixty CREE XLamp XPGВ® five watt LEDs producing 493 lumens each are
arranged in rows and paired with high purity optics to produce a well focused 25 degree spot beam that is ideal for providing far reaching
concentrated illumination while still covering a substantial amount of area. We also offer optional floodlight versions with a 60 degree beam
spread to provide more light over a larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. These
LED light bars are waterproof to 3 meters, sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most
demanding mining environments, conditions and applications.
GAU-HB-60X5W-480V LED lights are ideal replacements for fragile and hot running 1000 watt metal halide lamps. They offer Pulse Width
Modulation control, a small profile, low power requirements, high durability and a versatile mounting system that makes these LED light emitters
a superior lighting solution for mining applications where power and reliability is critical. The heavy duty design and high power of these mining
lights also makes them suitable for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning,
security and law enforcement, and commercial structure illumination.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 17
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of
light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on
or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to automatically monitor and
adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These GAU-HB-60X5W-480V
high bay lights can operate on 480V AC three phase without any modifications necessary as a result. This ability to sense and adjust input
current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise result in
burning up or premature LED failure without it.
Durability: As well as unparalleled heat control, the GAU-HB-60X5W-480V series of LED high bay lights from Larson Electronics also offer IP68
rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid
temperature changes of -40 degrees Celsius to 80 degrees Celsius, are waterproof to three meters, and resist ingress of dust, dirt and humidity.
The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XPGВ® LEDs help these
units achieve 15.6Grms rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend
these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.
Mounting: Each unit is equipped with an innovative trunnion style mounting bracket that allows the light to be attached to flat surfaces and
adjusted through 360 degrees of vertical movement. To adjust the unit after mounting, the user simply loosens the thumb screws located on
either side of the unit, moves it into the desired position, then retightens the screws. The base of the mounting trunnion is equipped with several
machined slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning.
CONDITIONS
Vin min (V) = 9
toff (us) = 2.9
Vin nom (V) = 12
R1 (kohm) = 50.2
Vin max (V) = 50
L1 (uH) = 3.0
Vo min (V) = 6.5
L-Pk (A) = 2.9
Vo nom (V) = 6.8
L-rms (A) = 2.9
Vo max (V) = 7
Ipk (A) = 2.5
I-LED (A) = 2.2
R2 (ohm) = 0.10
Efficiency = .85
I-FET (A) = 2.2
fsw nom (kHz) = 150
fs min (kHz) = 77
Ts nom (us) = 6.666667
fs max (kHz) = 301
Base frequency-
= 36~37Khz @ 12V
Amplitude of pulse width-
= 27Ms
Outside: External dimmer-
= 500Hz
Inside : Current sensing from-
77KHz at 12V to 300KHz at 50V
11/18/2014
Page: 18
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
GAU-HB-60X5W-480V
Internal LED Driver Features
Lamp Type: CREE XLamp-XPGВ® LED
Active Heat Management
Dimensions: 22.69 "-L 22.69"-H 4.94"-D
Ambient Op Temp -40C to +80C
Watts: 300
Led Drive %: 90%
Voltage:480V AC 3P
Lighting Configuration: 60В° Flood or 25В° Spot
Mounting: Flat Surface 360 Degree Vertical Adjustable
Wiring: 10ft cable w/ flying leads
Amps: 0.7 (on 480 volts)
Lumens: 29,580
Special Orders- Requirements
LED Light Color: White
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black
Weight: 35 Lbs
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 19
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 20
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
320 Watt High Intensity LED Light - 32 LEDs - 29,446 Lumens - Degreed Aiming - 120-277V
Part #: LED10WSA-320-1227
Price: $2,683.98
11/18/2014
Page: 21
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The LED10WSA-320-1227 LED Light offers high output from a compact form factor and is ideal for use in mining applications as well
as heavy equipment, hunting, boating, vehicle, military, law enforcement and industrial manufacturing uses. A 29,446 lumen output,
2.67 amp draw, 50,000 hour service life and 120-277 AC volt compatibility provides operators with a rugged and powerful LED
alternative to 1000 watt metal halide lamps that uses little power and can withstand rugged use and abusive mining conditions.
The LED10WSA-320-1227 high output LED light from Larson Electronics produces 29,446 lumens of high intensity light while drawing only 320
watts @ 2.67 amps from a 120 volt electrical system. Thirty-two CREE XM-L2В® ten watt LEDs producing 920 lumens each are arranged in rows
and paired with high purity optics to produce a well focused 10В° spot beam that is ideal for providing far reaching concentrated illumination while
still covering a substantial amount of area. We also offer optional floodlight versions with a 40В° or 60В° beam spread to provide more light over a
larger area close to the fixture, making flood versions ideal for use as dedicated work area lights. These LED light bars are waterproof to 3
meters, sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding environments, conditions and
applications.LED10WSA-320-1227 lights are ideal replacements for fragile and hot running 1000 watt metal halide lamps. They offer soft start technology, a
small profile, low power requirements, high durability and a shock dampening mounting system that makes these LED light emitters a superior
lighting solution for rough applications where power and reliability is critical. The heavy duty design and high power of these LED lights also
makes them suitable for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning,
mining, security and law enforcement, boating, vehicles and commercial structure illumination.
Protection: These high output LED light bars feature soft start technology, allowing the LEDs to gradually increase to maximum intensity
instead. Low in rush current at start-up reduces wear on associated components, increasing overall life of the internal electronics and improves
downtime. Built in redundancy lessens chance of full fixture failure, while the reverse polarity operation protects the fixture from shorting the
internal components.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of
light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on
or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
Voltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels
regardless of input levels across a specific range. These LED10WSA-1227 series light bars can operate on current ranging from 100 to 277 VAC
without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and
drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it.
Durability: As well as unparalleled heat control, the LED10WSA series of LED lights from Larson Electronics also offer IP69K rated construction
that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40В°C
to +80В°C, are waterproof to three meters, can withstand high pressure and high temperature wash downs, and resist ingress of dust, dirt and
humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XM-L2В® LEDs help these
units achieve up to 60Grms rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend
these LED lights for use in applications that require regular intensive cleaning and are exposed to a lot of vibration, dust, dirt, and abusive
working conditions are encountered.
Mounting: Each unit is equipped with an innovative trunnion style mounting bracket that allows the light to be attached to flat surfaces and
adjusted through 360 degrees of vertical movement. The LED light head is secured to the mounting bracket with shock dampening rotating
inserts. The insert provides precision aiming down to 1В° while providing increased longevity to the LED fixture. To vertically adjust the unit after
mounting, the user simply loosens the screws located on either side of the unit, moves it into the desired position, then retightens the screws.
The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and slide the unit
for precise mount positioning. The stainless steel trunnion bracket has preset angles marked in 5В° intervals, allowing operators to precisely aim
each fixture.
Note: The LED10WSA series feature gold plated DT connectors to provide better conductivity. Most Larson Electronics LEDP5W-30, LEDLB,
LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The
mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending
on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating,
IR/Visible combos) will have different Deutsch connectors.
Applications for the LEDP10WSA include but are not limited to mining, dump trucks, construction machinery, cement mixers, and car washes.
11/18/2014
Page: 22
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LED10WSA-320-1227 High Output LED Light
LED10WSA-320 Series Features
Lamp Type: CREE XL-L2В® LED
Automatic Current Sensing and Adjusting
Dimensions: 14.65"-L 9.06"-H 6.46"-D
Active Heat Management
Watts: 320
Ambient Op Temp -40В°C to +80В°C
Led Drive %: 90%
IP69K High Temp High Pressure Wash Down
Voltage: Universal Voltage 120-277V AC
EMC/EMI CISPR 25 Class 3 Rated
Beam Spread: 10В° Spot, 40В° Flood, 60В° Flood, 30В°/60В° Elliptical
304 Stainless Steel Mounting Hardware
Mounting: Flat Surface 304 SS Bracket - 360 Degree Adjustable
Shock Dampening Mounting System
Wiring: Gold Plated Deutsch IPD / LADD DT04-2P connector
Amps: 2.67 @ 120V
Lumens: 29,446
Special Orders- Requirements
LED Light Color: White
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black
Weight: 27.25 Lbs
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 23
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Hi-Res Image 1 - Hi-Res Image 2 - Hi-Res Image 3 -
11/18/2014
Page: 24
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Hi-Res Image 4 - Hi-Res Image 5 - Hi-Res Image 6 - Hi-Res Image 7 - Hi-Res Image 8 - Hi-Res Image 9 -
11/18/2014
Page: 25
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
150 Watt High Intensity LED Light w/ 50 Cord Reel - Collapsible Quadpod- 14,790 Lumens
Part #: LEDP5W-30-TP1-50CR
Price: $2,566.32
Made in the USA
The Larson Electronics LEDP5W-30-TP1-50CR Quadpod Mounted Light Tower comes complete with an IP68 rated 150 watt LED light
head, an aluminum quadpod, and a 50' retractable cord reel. This LED light produces a 14,790 lumen flood of light capable of
illuminating an area 540’ in length by 480’ feet in width. This quadpod mounted unit can be used with 12 or 24 VDC voltages depending
upon chosen configuration and is ideal for use as work area illumination, event lighting, emergency operations lighting, or equipment
lighting.
The LEDP5W-30-TP1-50CR work area light tower provides operators with a very versatile lighting solution for operations where easily managed
mobile illumination of large sized areas is required. An IP68 rated, 150 watt LED floodlight creates a total of 14,790 lumens of bright white light
and provides light coverage for an area 540’ long by 480’ wide. This unit can also be ordered with LEDs in spotlight configuration to produce a
beam 1200’ long by 140’ in width. This light tower is expendable from 7’ to 12’ in height and incorporates a cord reel with 50' of 12/2 SOOW
cable to easily move the light tower to any location.
Durability: The LEDP5W-30-TP1-50CR light tower incorporates a single high power LED light emitter on a collapsible aluminum quadpod. Thirty
CREE XLamp XPGВ® five watt LEDs producing 493 lumens each are arranged in a heavy duty aluminum housing to produce a 60 degree flood
beam ideal for use as mobile work and area lighting. The LED unit is waterproof to 3 meters, sealed against intrusion by dust and dirt, and very
ruggedly constructed to withstand the most demanding environments, conditions and applications. Alternatively, the LED unit can also be
ordered with optional high purity 25 degree spot beam optics to provide a tighter, longer beam ideal for distance illumination.
LEDP5W-30-TP1-50CR light towers are ideal replacements for fragile and hot running 400 watt metal halide tower lamps. They offer Pulse Width
Modulation control, a small profile, low power requirements, high durability and a versatile mounting system that makes these LED light emitters
a superior lighting solution for various applications where power and reliability is critical.
Mounting: This portable LED light is comprised of an adjustable LED light head mounted atop a four leg quadpod fabricated from non-sparking
powder coated aluminum. This adjustable and collapsible quadpod can be extended to twelve feet, collapsed to seven feet. LED light fixture
assembly can be removed by releasing the hand knob and sliding the light and mounting bracket off of the center support while the legs can be
collapsed, aiding in deployment, storage and transport. The lamp can be easily adjusted vertically and locked into position.
11/18/2014
Page: 26
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDP5W-30-TP1-50CR LED Light Tower
LELEDP5W-30-TP1-50CR Features
Lamp Type: High Intensity LED Light Unit
IP68 Rated Weatherproof & Waterproof
Dimensions: Telescoping- 7' to 12'
Adjustable Quadpod Extends 7' to 12'
Total Watts: 150
Multiple Power Connector Options
Lumens: 14,790
Low Amp Draw
Voltage: 12 or 24 VDC
Long 50,000 Hour LED Life
Amps: 12.5 on 12 VDC - 6.25 on 24VDC
Mounting: Telescoping Light Tower
Lighting Configuration:: 25В° Spot or 60В° Flood
LED Light Color: 6000K
LED Life Expectancy: 50,000 Hours
Special Orders- Requirements
Wiring: Cord Reel - 50' 12/2 SOOW
Contact us for special requirements
LED Housing Colors: Black or White
Toll Free: 1-800-369-6671
Fax: 1-903-498-3364
E-mail: [email protected]
CE Certified
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 27
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 28
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Hi-Res Image 1
- Hi-Res Image 2
- Hi-Res Image 3
11/18/2014
Page: 29
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Hi-Res Image 4
- Hi-Res Image 5
11/18/2014
Page: 30
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
300 Watt LED High Bay Light Fixture - 120-277VAC - 1000W Metal Halide Equivalent - 29,580 Lumens
Part #: GAU-HB-60X5W-1227
Price: $2,426.24
11/18/2014
Page: 31
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The GAU-HB-60X5W-1227 High Output LED High Bay Light offers high output and energy efficient alternative to traditional general area
luminaries. LED technology and compact design makes this lamp an excellent energy efficient upgrade option for bulky and high
maintenance cost older fixtures. A 29,580 lumen output, 2.5 amp draw, 50,000 hour service life, and 120-277 volt compatibility provides
mine operators with a rugged and powerful LED alternative to 1000 watt metal halide lamps that uses little power and can withstand
rugged use and abusive conditions.
The GAU-HB-60X5W-1227 LED high bay light from Larson Electronics produces 29,580 lumens of high intensity light while drawing only 300
watts @2.5 amps from a 120 volt electrical system. Sixty CREE XLamp XPGВ® five watt LEDs producing 493 lumens each are arranged in rows
and paired with high purity optics to produce a well focused 25 degree spot beam that is ideal for providing far reaching concentrated illumination
while still covering a substantial amount of area. We also offer optional floodlight versions with a 60 degree beam spread to provide more light
over a larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. These LED light bars are waterproof
to 3 meters, sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding mining environments,
conditions and applications.
GAU-HB-60X5W-1227 LED lights are ideal replacements for fragile and hot running 1000 watt metal halide lamps. They offer Pulse Width
Modulation control, a small profile, low power requirements, high durability and a versatile mounting system that makes these LED light emitters
a superior lighting solution for mining applications where power and reliability is critical. The heavy duty design and high power of these mining
lights also makes them suitable for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning,
security and law enforcement, and commercial structure illumination.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 32
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of
light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on
or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to automatically monitor and
adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These GAU-HB-60X5W-1227
high bay lights can operate on current ranging from 120 to 277VAC without any modifications necessary as a result. This ability to sense and
adjust input current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise
result in burning up or premature LED failure without it.
Durability: As well as unparalleled heat control, the GAU-HB-60X5W-1227 series of LED high bay lights from Larson Electronics also offer IP68
rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid
temperature changes of -40 degrees Celsius to 80 degrees Celsius, are waterproof to three meters, and resist ingress of dust, dirt and humidity.
The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XPGВ® LEDs help these
units achieve 15.6Grms rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend
these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.
Mounting: Each unit is equipped with an innovative trunnion style mounting bracket that allows the light to be attached to flat surfaces and
adjusted through 360 degrees of vertical movement. To adjust the unit after mounting, the user simply loosens the thumb screws located on
either side of the unit, moves it into the desired position, then retightens the screws. The base of the mounting trunnion is equipped with several
machined slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning.
CONDITIONS
Vin min (V) = 9
toff (us) = 2.9
Vin nom (V) = 12
R1 (kohm) = 50.2
Vin max (V) = 50
L1 (uH) = 3.0
Vo min (V) = 6.5
L-Pk (A) = 2.9
Vo nom (V) = 6.8
L-rms (A) = 2.9
Vo max (V) = 7
Ipk (A) = 2.5
I-LED (A) = 2.2
R2 (ohm) = 0.10
Efficiency = .85
I-FET (A) = 2.2
fsw nom (kHz) = 150
fs min (kHz) = 77
Ts nom (us) = 6.666667
fs max (kHz) = 301
Base frequency-
= 36~37Khz @ 12V
Amplitude of pulse width-
= 27Ms
Outside: External dimmer-
= 500Hz
Inside : Current sensing from-
77KHz at 12V to 300KHz at 50V
11/18/2014
Page: 33
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
GAU-HB-60X5W-1227
Internal LED Driver Features
Lamp Type: CREE XLamp-XPGВ® LED
Automatic Current Sensing and Adjusting 12/24VDC
Dimensions: 22.69 "-L 22.69"-H 4.94"-D
Active Heat Management
Watts: 300
Ambient Op Temp -40C to +80C
Led Drive %: 90%
Voltage:120-277 VAC
Lighting Configuration: 60В° Flood or 25В° Spot
Mounting: Flat Surface 360 Degree Vertical Adjustable
Wiring: 10ft cable w/ flying leads
Amps: 2.5 (on 120 volts)
Lumens: 29,580
Special Orders- Requirements
LED Light Color: White
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black
Weight: 35 Lbs
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 34
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 35
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
320 Watt High Intensity LED Light - 32 LEDs - 29,446 Lumens - Degreed Aiming - Soft Start LEDs
Part #: LED10WSA-320
Price: $2,346.00
11/18/2014
Page: 36
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The LED10WSA-320 LED Light offers high output from a compact form factor and is ideal for use in mining applications as well as
heavy equipment, hunting, boating, vehicle, military, law enforcement and industrial manufacturing uses. A 29,446 lumen output, 12.53
amp draw, 50,000 hour service life and 12-24 volt compatibility provides operators with a rugged and powerful LED alternative to 400
watt metal halide lamps that uses little power and can withstand rugged use and abusive mining conditions.
The LED10WSA-320 high output LED light from Larson Electronics produces 29,446 lumens of high intensity light while drawing only 320 watts
@13.33 amps from a 24 volt electrical system. Thirty-two CREE XM-L2В® ten watt LEDs producing 920 lumens each are arranged in rows and
paired with high purity optics to produce a well focused 10В° spot beam that is ideal for providing far reaching concentrated illumination while still
covering a substantial amount of area. We also offer optional floodlight versions with a 40В° or 60В° beam spread to provide more light over a larger
area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. These LED light bars are waterproof to 3 meters,
sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding environments, conditions and
applications.LED10WSA-320 lights are ideal replacements for fragile and hot running 400 watt metal halide lamps. They offer soft start technology, a small
profile, low power requirements, high durability and a shock dampening mounting system that makes these LED light emitters a superior lighting
solution for rough applications where power and reliability is critical. The heavy duty design and high power of these LED lights also makes them
suitable for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning, mining, security and law
enforcement, boating, vehicles and commercial structure illumination.
Protection: These high output LED light bars feature soft start technology, allowing the LEDs to gradually increase to maximum intensity
instead. Low in rush current at start-up reduces wear on associated components, increasing overall life of the internal electronics and improves
downtime. Built in redundancy lessens chance of full fixture failure, while the reverse polarity operation protects the fixture from shorting the
internal components.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of
light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on
or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
Voltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels
regardless of input levels across a specific range. These LED10WSA series light bars can operate on current ranging from 11 to 65 VDC without
any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops
that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it.
Durability: As well as unparalleled heat control, the LED10WSA series of LED lights from Larson Electronics also offer IP69K rated construction
that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40В°C
to +80В°C, are waterproof to three meters, can withstand high pressure and high temperature wash downs, and resist ingress of dust, dirt and
humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XM-L2В® LEDs help these
units achieve up to 60Grms rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend
these LED lights for use in applications that require regular intensive cleaning and are exposed to a lot of vibration, dust, dirt, and abusive
working conditions are encountered.
Mounting: Each unit is equipped with an innovative trunnion style mounting bracket that allows the light to be attached to flat surfaces and
adjusted through 360 degrees of vertical movement. The LED light head is secured to the mounting bracket with shock dampening rotating
inserts. The insert provides precision aiming down to 1В° while providing increased longevity to the LED fixture. To vertically adjust the unit after
mounting, the user simply loosens the screws located on either side of the unit, moves it into the desired position, then retightens the screws.
The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and slide the unit
for precise mount positioning. The stainless steel trunnion bracket has preset angles marked in 5В° intervals, allowing operators to precisely aim
each fixture.
Note: The LED10WSA series feature gold plated DT connectors to provide better conductivity. Most Larson Electronics LEDP5W-30, LEDLB,
LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The
mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending
on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating,
IR/Visible combos) will have different Deutsch connectors.
Applications for the LEDP10WSA include but are not limited to mining, dump trucks, construction machinery, cement mixers, and car washes.
11/18/2014
Page: 37
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LED10WSA-320 High Output LED Light
LED10WSA-32 Series Features
Lamp Type: CREE XL-L2В® LED
Automatic Current Sensing and Adjusting
Dimensions: 14.65"-L 9.06"-H 6.46"-D
Active Heat Management
Watts: 320
Ambient Op Temp -40В°C to +80В°C
Led Drive %: 90%
IP69K High Temp High Pressure Wash Down
Voltage: Universal Voltage 11-65V DC
EMC/EMI CISPR 25 Class 3 Rated
Beam Spread: 10В° Spot, 40В° Flood, 60В° Flood, 30В°/60В° Elliptical
304 Stainless Steel Mounting Hardware
Mounting: Flat Surface 304 SS Bracket - 360 Degree Adjustable
Shock Dampening Mounting System
Wiring: Gold Plated Deutsch IPD / LADD DT04-2P connector
Amps: 26.66 (on 12 volts) - 13.33 (on 24 volts)
Lumens: 29,446
Special Orders- Requirements
LED Light Color: White
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black
Weight: 24.25 Lbs
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 38
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Hi-Res Image 1 - Hi-Res Image 2 - Hi-Res Image 3 -
11/18/2014
Page: 39
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Hi-Res Image 4 - Hi-Res Image 5 - Hi-Res Image 6 - Hi-Res Image 7 - Hi-Res Image 8 - Hi-Res Image 9 -
11/18/2014
Page: 40
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LED Light Bar w/ Trunnion U-Bracket Mount - 80, 3-Watts LEDs - 9-42VDC - 1750'L X 300'W Spot Beam
Part #: LEDLB-80X2ET
Price: $2,135.00
Buy American Compliant
The Larson Electronics LEDLB-80X2ET LED Light Bar offers high light output and extreme durability combined
with versatile mounting and power options. This IP68 rated LED light bar is waterproof to three meters and
produces 14,400 lumens while drawing only 240 watts of power @20 amps from a 12 volt electrical system. This
light can run on any voltage from 9 to 42 volts and provides an extremely rugged lighting solution that is ideal for
use in commercial marine environments as well as industrial and manufacturing applications such as machine
vision system lighting, heavy equipment illumination, blasting lighting and mining operations.
The LEDLB-80X2ET LED light bar from Larson Electronics produces a 1750' long by 300' wide light beam with 14,400
lumens of bright light while drawing only 240 watts @20 amps from a 12 volt electrical system. Eighty Edison EdixeonВ®
Emitters containing CREE EZBrightВ® three watt LEDs producing 180 lumens each are arranged in rows and paired with
high purity 10 degree optics to produce a tightly focused spot beam with limited spread or light spillage. We also offer
optional floodlight versions with 35 degree optics to produce a wider beam spread and more light over a larger area nearer
the fixture, making flood versions ideal for use as work and area lights. These LED light bars are IP68 rated and waterproof
to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding
environments, conditions and applications.
The entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier housings, rubber
isolated mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves,
hard rains, sand and high winds. This light is equipped with a trunnion mounting bracket that allows operators to adjust the
light fixture through 270 degrees of movement.
11/18/2014
Page: 41
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This photo shows an open field illuminated only
by ambient light at approximately 9:00 pm'.
This image shows the LEDLB-80X2ET unit
illuminating the field, a sign is placed approx. 975
feet away.
This photo shows a close up on the sign, notice
that the actual beam reaches out farther than the
Larson Electronics sign.
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
This is a popular LED light with commerical fishermen. If you are selecting this light for commercial fishing use, be sure to select the spot beam option and
not the flood beam. Lobster Fishermen have actually reported being able to read small details such as watches and compasses at over 2800'!!
11/18/2014
Page: 42
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many
manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an
extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to
produce the maximum amount of power and longevity from the integrated Edison EdixeonВ® Emitters. The end result is
more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels
regardless of input levels across a specific range. These LEDLB series light bars can operate on current ranging from 9 to
42VDC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and
standalone applications such as those found on commercial boats, heavy equipment and vehicles where power systems
don’t always operate with 12 volts and external generators, transformers or inverters are impractical.
LEDLB-80X2ET 35В° Flood Beam
(Opt)
LEDLB-80X2ET 10В° Spot Beam
(Stnd)
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to
withstand extremes of environmental and operating conditions. The LED lights with the �E’ part number designation are
designed for extreme durability and are larger and nearly twice as heavy as their standard counterparts. These units can
withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and
resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum and the lenses are
unbreakable polycarbonate. The EdixeonВ® LEDs offer inherent LED resistance to shocks and vibrations contributing to
these units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory
conditions, high humidity climates, very cold areas and rough saltwater conditions. They are also well suited to
environments where equipment is used in one temperature extreme and stored in another temperature extreme.
Adjustable Mounting: The trunnion wall mounting design on the LEDLB-80X2ET allows for post-installation angle
positioning. This means that by loosening 2 thumb bolts located on either side of the light, the operator can adjust the
positioning angle of this light 270 degrees. Then he/she would simply have to tighten thumb bolts to lock the angle in place.
No tools are required for adjusting angle. We also offer a BC-2 bar clamp mounting system you can view here for even
greater mounting versatility.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are
terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and
LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED
lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible
combos) will have different Deutsch connectors.
11/18/2014
Page: 43
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-80X2ET LED Light Bar
LEDLB LED Features
LEDs: 80 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 22.25"-L 5.25"-H 3.56"-D
LEDs Driven At 80%
Watts: 240
-40 C~ +80C Operating Temp Range
Voltage: 9-42 VDC
Spot Beam: 1750'L x 300'W
Flood Beam: 570'L x 500'W
RoHS Compliant
Weight:20.25 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
LED Chip Op Temp -40C to +125C
Mounting: Trunnion Bracket
IP68 Rated Waterproof to 3 meters
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps: 20 (on 12 volts) 10 (on 24 volts)
Lumens: 14,400
Special Orders- Requirements
LED Light Color: 6000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Lux Readings 10' increments: 10' - 10,000, 20' - 2,900, 30' - 1,275, 40' 660, 50' - 425, 60' - 290, 70' - 195, 80' - 140, 90' - 110, 100' - 90, 110' - 70
CE Certified
3 year warranty replacement on this LED light. After 30 days, the customer
ships the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement.
Scroll Down to Purchase-
11/18/2014
Page: 44
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- SpecSheet French
- SpecSheet Arabic
- Dimensional Drawing
- Manual
11/18/2014
Page: 45
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
300 Watts High Intensity LED Light w/ 20' Cord and Wall Plug - 60 LEDs - 29,580 Lumens - 120-277V AC
Part #: LEDP5W-60-1227-20C
Price: $2,289.45
11/18/2014
Page: 46
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The LEDP5W-60-1227-20C High Output LED Light offers high output from a compact form factor and is ideal for
use in mining applications as well as heavy equipment, hunting, boating, vehicle, military, law enforcement and
industrial manufacturing uses. A 29,580 lumen output, 2.5 amp draw, 50,000 hour service life, and 120-277 volt
compatibility provides mine operators with a rugged and powerful LED alternative to 1000 watt metal halide lamps
that uses little power and can withstand rugged use and abusive conditions.
The LEDP5W-60-1227-20C LED light from Larson Electronics produces 29,580 lumens of high intensity light while drawing
only 300 watts @2.5 amps from a 120 volt electrical system. Sixty CREE XLamp XPGВ® five watt LEDs producing 493
lumens each are arranged in rows and paired with high purity optics to produce a well focused 25 degree spot beam that is
ideal for providing far reaching concentrated illumination while still covering a substantial amount of area. We also offer
optional floodlight versions with a 60 degree beam spread to provide more light over a larger area nearer the fixture,
making flood versions ideal for use as dedicated work and area lights. These LED light bars are waterproof to 3 meters,
sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding environments,
conditions and applications.
LEDP5W-60-1227-20C LED lights are ideal replacements for fragile and hot running 1000 watt metal halide lamps. They
offer Pulse Width Modulation control, a small profile, low power requirements, high durability and a versatile mounting
system that makes these LED light emitters a superior lighting solution for applications where power and reliability is
critical. The heavy duty design and high power of these lights also makes them suitable for a wide array of applications
including but not limited to: military, industrial manufacturing, machine visioning, security and law enforcement,
boating, vehicles and commercial structure illumination. These lights include a a 20 foot cord with straight blade plug to
allow connection to standard wall outlets.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 47
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain
advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are
typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the
temperature of each LED and adjust the energy frequency or “duty cycle” accordingly to maintain heat levels within
acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon
the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the
current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without
overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is
changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life
with an average 70% lumen maintenance after 50,000 hours.
PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to
automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a
specific range. These LEDP5W-60-1227-20C light bars can operate on current ranging from 120 to 277VAC without any
modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage
spikes and drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED
failure without it.
Durability: As well as unparalleled heat control, the LEDP5W-60 series of LED lights from Larson Electronics also offer
IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can
withstand rapid temperature changes of -40 degrees Celsius to 80 degrees Celsius, are waterproof to three meters, and
resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable
polycarbonate. The CREE XLamp XPGВ® LEDs help these units achieve 15.6Grms rated resistance to vibrations and are
rated at 70% lumen maintenance after 50,0000 hours of use. We recommend these LED lights for use in applications
where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.
Mounting: Each unit is equipped with an innovative trunnion style mounting bracket that allows the light to be attached to
flat surfaces and adjusted through 360 degrees of vertical movement. To adjust the unit after mounting, the user simply
loosens the thumb screws located on either side of the unit, moves it into the desired position, then retightens the screws.
The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting
holes and slide the unit for precise mount positioning.
Note: Most Larson Electronics LEDP5W, LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights
are terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and
LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED
lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible
combos) will have different Deutsch connectors.
11/18/2014
Page: 48
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDPM5W-60-1227-20C LED Light Bar
Internal LED Driver Features
Lamp Type: CREE XLamp-XPGВ® LED
Automatic Current Sensing and Adjusting 12/24VDC
Dimensions: 14 5/8"-L 11 7/8"-H 7 1/4"-D
Active Heat Management
Watts: 300
Ambient Op Temp -40C to +80C
Led Drive %: 90%
UL1012 Compliant
Voltage:120-277 VAC
UL60950-1 Compliant
Lighting Configuration: 25В° Spot or 60В° Flood
Mounting: Flat Surface 360 Degree Vertical Adjustable
Wiring: 20ft cable w/ 5-15 plug
Amps: 2.5 (on 120 volts)
Lumens: 29,580
Special Orders- Requirements
LED Light Color: White
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black
Weight: 35 Lbs
3 year warranty replacement on this LED light. After 30 days, the customer
ships the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, we will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 49
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
High Intensity LED Light - 300 Watts - 60 LEDs - 29,580 Lumens - 120-277V AC
Part #: LEDP5W-60-1227
Price: $2,229.45
11/18/2014
Page: 50
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The LEDP5W-60-1227 LED Light offers high output from a compact form factor and is ideal for use in mining
applications as well as heavy equipment, hunting, boating, vehicle, military, law enforcement and industrial
manufacturing uses. A 29,580 lumen output, 2.5 amp draw, 50,000 hour service life and 24 volt compatibility
provides mine operators with a rugged and powerful LED alternative to 1000 watt metal halide lamps that uses
little power and can withstand rugged use and abusive conditions.
The LEDP5W-60-1227 LED light from Larson Electronics produces 29,580 lumens of high intensity light while drawing only
300 watts @2.5 amps from a 120 volt electrical system. Sixty CREE XLamp XPGВ® five watt LEDs producing 493 lumens
each are arranged in rows and paired with high purity optics to produce a well focused 25 degree spot beam that is ideal for
providing far reaching concentrated illumination while still covering a substantial amount of area. We also offer optional
floodlight versions with a 60 degree beam spread to provide more light over a larger area nearer the fixture, making flood
versions ideal for use as dedicated work and area lights. These LED light bars are waterproof to 3 meters, sealed against
intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding environments, conditions and
applications.
LEDP5W-60-1227 lights are ideal replacements for fragile and hot running 1000 watt metal halide lamps. They offer Pulse
Width Modulation control, a small profile, low power requirements, high durability and a versatile mounting system that
makes these LED light emitters a superior lighting solution for demanding applications where power and reliability is critical.
The heavy duty design and high power of these LED lights also makes them suitable for a wide array of applications
including but not limited to: military, mining, industrial manufacturing, machine visioning, security and law enforcement,
boating, vehicles and commercial structure illumination.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 51
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain
advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are
typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the
temperature of each LED and adjust the energy frequency or “duty cycle” accordingly to maintain heat levels within
acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon
the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the
current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without
overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is
changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life
with an average 70% lumen maintenance after 50,000 hours.
PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to
automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a
specific range. These LEDP5W-60-1227 light bars can operate on current ranging from 120 to 277VAC without any
modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage
spikes and drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED
failure without it.
Durability: As well as unparalleled heat control, the LEDP5W-60 series of LED lights from Larson Electronics also offer
IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can
withstand rapid temperature changes of -40 degrees Celsius to 80 degrees Celsius, are waterproof to three meters, and
resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable
polycarbonate. The CREE XLamp XPGВ® LEDs help these units achieve 15.6Grms rated resistance to vibrations and are
rated at 70% lumen maintenance after 50,0000 hours of use. We recommend these LED lights for use in applications
where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.
Mounting: Each unit is equipped with an innovative trunnion style mounting bracket that allows the light to be attached to
flat surfaces and adjusted through 360 degrees of vertical movement. To adjust the unit after mounting, the user simply
loosens the thumb screws located on either side of the unit, moves it into the desired position, then retightens the screws.
The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting
holes and slide the unit for precise mount positioning.
Note: Most Larson Electronics LEDP5W, LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights
are terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and
LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED
lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible
combos) will have different Deutsch connectors.
11/18/2014
Page: 52
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDPM5W-60-1227 LED Light Bar
Internal LED Driver Features
Lamp Type: CREE XLamp-XPGВ® LED
Automatic Current Sensing and Adjusting 12/24VDC
Dimensions: 14 5/8"-L 11 7/8"-H 7 1/4"-D
Active Heat Management
Watts: 300
Ambient Op Temp -40C to +80C
Led Drive %: 90%
UL1012 Compliant
Voltage:120-277 VAC
UL60950-1 Compliant
Lighting Configuration: 25В° Spot or 60В° Flood
Mounting: Flat Surface 360 Degree Vertical Adjustable
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps: 2.5 (on 120 volts)
Lumens: 29,580
Special Orders- Requirements
LED Light Color: White
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black
Weight: 35 Lbs
3 year warranty replacement on this LED light. After 30 days, the customer
ships the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement.
Scroll Down to Purchase-
Links (Click on the below items to view):
- Dimensional Drawing
11/18/2014
Page: 53
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
High Intensity LED Light Bar - Trunnion U-Bracket - 24, 10-Watt LEDs - 20,640 Lumen - 9-46VDC
Part #: LEDP10W-240ET
Price: $2,162.00
Buy American Compliant
The LEDP10W-240ET LED Light Bar with trunnion u-bracket offers high light output and extreme durability combined with a versatile
trunnion mounting system that provides 270 degrees of adjustability. This LED unit is ideal for a wide variety of uses including
equipment, vehicle, military, law enforcement and is particularly well suited to boating installations. 20,640 lumen output with low
voltage and low amp draw, a 50,000 hour rated service life, and 9 to 46 volt compatibility provides operators with an extremely versatile
and powerful LED lighting solution.
The LEDP10W-240ET LED light bar from Larson Electronics produces 20,640 lumens of bright light while drawing only 240 watts @20 amps
from a 12 volt electrical system. Twenty four CREE XLamp MC-EВ®10 watt LEDs producing 860 lumens each are paired with high purity optics to
produce a 20 degree spread spot beam approximately 1450’ long by 200’ in width. We also offer floodlight versions with a 40 degree beam
spread to provide more light over a larger area nearer the fixture, making flood versions ideal for use as work lights. These LED light bars are
waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments,
conditions and applications.
An integral Pulse Width Modulation controller, small profile, low power requirements, high durability and versatile mounting system makes these
LED light emitters a superior lighting solution for a wide array of applications including but not limited to: military, industrial manufacturing,
machine visioning, security and law enforcement, boating, offroading and commercial structure illumination.
11/18/2014
Page: 54
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This photo shows an open field illuminated
only by ambient light at approximately 9:00
pm'.
This shows the LEDP10W-240ET illuminating
This is a close up of the 'Larson Electronics'
the field in flood configuration. This unit is ideal sign. The output gets soft past the sign due to
for work area illumination where more light is
it's flood configuration, yet the flood beam is
needed closer to the fixture..
still powerful up to 800'.
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss
of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually
on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to tap into a provided input wire
with an external pulse generator and adjust the duty cycle of the current being applied to the LEDs. Thus you can connect an external dimmer,
switch or pulse control and adjust the perceived output of the light, effectively causing the light to flash, dim or brighten to the desired levels.
Additionally, this method of controlling light output results in a corresponding drop in amperage draw, so if the duty cycle is cut back to 50% there
will be a matching 50% reduction in amperage draw. These units are also able to monitor and adjust input current to maintain the correct LED
voltage levels regardless of input levels across a specific range. These LEDP10W series light bars can operate on current ranging from 9 to
46VDC without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage
spikes and drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it.
11/18/2014
Page: 55
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Durability: As well as unparalleled heat control, the LEDP10W series of LED light bars from Larson Electronics also offer IP68 rated construction
that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40
degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed
from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp MC-EВ® LEDs offer resistance to shocks and
vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use.
Adjustable Mounting: The trunnion mounting design on the LEDLB-20ET allows for post-installation angle positioning. This means that by
loosening 2 thumb bolts located on either side of the light, the operator can adjust the positioning angle of this light 270 degrees. Then he/she
would simply have to tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB, LEDP10W and LED10W series lights ship with mating
connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple
function LED lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
LEDP10W-240ET 40В° Flood Beam
(Opt)
LEDP10W-240ET 20В° Spot Beam (Stnd)
11/18/2014
Page: 56
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
CONDITIONS
Vin min (V) = 9
toff (us) = 2.9
Vin nom (V) = 12
R1 (kohm) = 50.2
Vin max (V) = 50
L1 (uH) = 3.0
Vo min (V) = 6.5
L-Pk (A) = 2.9
Vo nom (V) = 6.8
L-rms (A) = 2.9
Vo max (V) = 7
Ipk (A) = 2.5
I-LED (A) = 2.2
R2 (ohm) = 0.10
Efficiency = .85
I-FET (A) = 2.2
fsw nom (kHz) = 150
fs min (kHz) = 77
Ts nom (us) = 6.666667
fs max (kHz) = 301
Base frequency-
= 36~37Khz @ 12V
Amplitude of pulse width-
= 27Ms
Outside: External dimmer-
= 500Hz
Inside : Current sensing from-
77KHz at 12V to 300KHz at 50V
Specifications / Additional Information
LEDP10W-240ET LED Light Bar
Internal LED Driver Features
Lamp Type: CREE XLamp MC-EВ® LED
Fast average current control
Dimensions: 39.10"-L 2.5"-H 3.5"-D
Programmable off-time switching
Watts: 240
Linear dimming input
Led Drive %: 90%
PWM dimming input
Voltage: 9-46 VDC
Short protection w/Skip mode
Lighting Configuration: 20В° Spot or 40В° Flood
Ambient Op Temp -40C to +125C
Mounting: Trunnion U-Bracket Mount - 270В° Adjustable Angle
Pin-compatible with the HV9910B
Wiring: Deutsch IPD / LADD DT04-2P connector
View Avg-Mode Driver Control PDF
Amps: 20 (on 12 volts) 10 amps (on 24 volts)
Lumens: 20,640
Special Orders- Requirements
LED Light Color: 6000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Flood Beam: Lux @1 meter= 35,000 @3 meters= 7,500
Spot Beam: Lux @1 meter= 72,000 @3 meters= 13,750
Spot Beam: 1450'L x 200'W
Flood Beam: 475'L x 350'W
Weight:16lbs
11/18/2014
Page: 57
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
CE Certified
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
Links (Click on the below items to view):
- Manual
11/18/2014
Page: 58
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
High Intensity LED Mining Light - 300 Watts - 60 LEDs - 29,580 Lumens - Metal Halide Equivalent
Part #: LEDP5W-60
Price: $2,053.24
11/18/2014
Page: 59
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The LEDP5W-60 LED Light offers high output from a compact form factor and is ideal for use in mining applications as well as heavy
equipment, hunting, boating, vehicle, military, law enforcement and industrial manufacturing uses. A 29,580 lumen output, 12.5 amp
draw, 50,000 hour service life and 24 volt compatibility provides mine operators with a rugged and powerful LED alternative to 1000
watt metal halide lamps that uses little power and can withstand rugged use and abusive conditions.
The LEDP5W-60 LED light from Larson Electronics produces 29,580 lumens of high intensity light while drawing only 300 watts @12.5 amps
from a 24 volt electrical system. Sixty CREE XLamp XPGВ® five watt LEDs producing 493 lumens each are arranged in rows and paired with high
purity optics to produce a well focused 25 degree spot beam that is ideal for providing far reaching concentrated illumination while still covering a
substantial amount of area. We also offer optional floodlight versions with a 60 degree beam spread to provide more light over a larger area
nearer the fixture, making flood versions ideal for use as dedicated work and area lights. These LED light bars are waterproof to 3 meters, sealed
against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding environments, conditions and applications.
LEDP5W-60 lights are ideal replacements for fragile and hot running 1000 watt metal halide lamps. They offer Pulse Width Modulation control, a
small profile, low power requirements, high durability and a versatile mounting system that makes these LED light emitters a superior lighting
solution for applications where power and reliability is critical. The heavy duty design and high power of these lights also makes them suitable for
a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning, security and law enforcement,
boating, vehicles and commercial structure illumination.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 60
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of
light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on
or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to automatically monitor and
adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDP5W-60 series light
bars can operate on 12V or 24V DC directly without the need for additional transformers or hardware.
Durability: As well as unparalleled heat control, the LEDP5W-60 series of LED lights from Larson Electronics also offer IP68 rated construction
that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40
degrees Celsius to 80 degrees Celsius, are waterproof to three meters, and resist ingress of dust, dirt and humidity. The housings are formed
from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XPGВ® LEDs help these units achieve 15.6Grms
rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend these LED lights for use in
applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.
Mounting: Each unit is equipped with an innovative trunnion style mounting bracket that allows the light to be attached to flat surfaces and
adjusted through 360 degrees of vertical movement. To adjust the unit after mounting, the user simply loosens the thumb screws located on
either side of the unit, moves it into the desired position, then retightens the screws. The base of the mounting trunnion is equipped with several
machined slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning.
Note: Most Larson Electronics LEDP5W, LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a
Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating
connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple
function LED lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
11/18/2014
Page: 61
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDPM5W-60 LED Light Bar
Internal LED Driver Features
Lamp Type: CREE XLamp-XPGВ® LED
Automatic Current Sensing and Adjusting 12/24VDC
Dimensions: 14 5/8"-L 11 7/8"-H 7 1/4"-D
Active Heat Management
Watts: 300
Ambient Op Temp -40C to +80C
Led Drive %: 90%
Voltage:12/24 VDC
Lighting Configuration: 25В° Spot or 60В° Flood
Mounting: Flat Surface 360 Degree Vertical Adjustable
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps: 12.5 (on 24 volts)
Lumens: 29,580
Special Orders- Requirements
LED Light Color: White
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black
Weight: 35 Lbs
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 62
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- SpecSheet Spanish
- Dimensional Drawing
- Manual
11/18/2014
Page: 63
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Magnetic Mount 31 Watt Low Voltage LED Fixture - 50' Cord - Hazardous Location Lighting - C1D2
Part #: HAL-31L-LV-MB-50
Price: $1,783.50
11/18/2014
Page: 64
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The HAL-31L-LV-MB-50 is a magnetic mount low voltage hazardous location lighting solution approved for Class 1 Division 2
environments and UL 1598 compliant for use in wet locations. This powerful LED light produces 2334 lumens, operates from 12 or 24
VDC, and is available in a variety of configurations to allow tailoring to the specific requirements of various applications.
The HAL-31L-LV-MB-50 is designed to provide a high output and ruggedly durable lighting solution for applications where Class 1 Division 2
compliance is required. This low voltage explosion proof light can be operated with either 12 or 24 volt DC current and includes 50 feet of
connecting lead with standard two wire configuration. This light is constructed of precision machined aluminum for excellent strength and
durability, clear anodized for corrosion resistance, and is IP66 rated for ingress protection against dust and direct exposure to high pressure
water spray. An adjustable trunnion mount U-bracket with an 600lb grip magnetic base provides versatile mounting for temporary illumination.
The HAL-31L-LV-MB-50 is available in a 30 degree spotlight beam configuration for distance and a 100 degree configuration for wide area
illumination. The light output is offered in 6500K cool white, 4300K neutral white, and 3500K warm white color temperatures for maximum
illumination. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older,
bulkier, and less reliable metal halide and high pressure sodium lamps.
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 65
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Durability: The HAL-31L-LV-MB-50 hazardous location LED light is constructed of machined aluminum for high strength and durability with a
clear anodized finish for increased corrosion resistance. The housing is IP66 rated, providing protection against intrusion into the housing from
dusts, dirt, oils and water directly sprayed on the housing at high pressure. This LED light is equipped with an impact resistant acrlyic lens for
increased safety compared to glass lenses. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where
wetness or dusty conditions are commonly encountered.
High Output LEDs: The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme
long life. These Cree LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 100,000 hours, giving them better
efficiency and operational life than comparable LEDs. These lights are available in a 30 degree spotlight configuration for long beam length or
100 degree flood configuration for wide area coverage. The HAL-31L-LV-MB-50 has multiple color temperature options and is offered in 6500K
cool white with a color rendering of 75, 4300K neutral white with a color rendering of 75, and 3500K warm white with a color rendering of 80.
Mounting: Mounting for this unit is provided by an included aluminum yoke that allows vertical adjustment of the light once installed. The
mounting yoke includes three 200lb magnets, providing 600lb of magnetic gripping force and allowing this unit to be mounted to any ferrous
surfaces. The hazardous location low votage LED light fixture is ideal for mounting in areas where space is limited and a heavy fixture cannot be
installed due to lack of support.
Wiring/Power: These hazardous location LED lights are equipped with 50 feet of cord containing a standard two wire (White+ Black-) connecting
configuration. These lights operate from 12 to 24 volt DC current and draw 31 watts 2.64 amps on 12 VDC and 33 Watts 1.4 amps on 24 VDC.
Versatility: The HAL-31L-LV-MB-50 is ETL listed for Class 1 Division 2 groups A,B,C and D locations, certified to CSA 22.2 No. 250.0, and
conforms to UL 1598. This unit carries an IP66 waterproof rating ensuring protection against ingress from dusts, dirt, oils and water sprayed at
high pressure directly on the fixture. This light is ideal for indoor or outdoor applications, food processing, and industrial operations with
hazardous location classification where dusty or wet conditions are commonly encountered.
11/18/2014
Page: 66
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
HAL-31L-LV-MB-50 Hazardous Location LED Light
ETL Listed
Lamp Type: LED
Class 1 Division 2 Groups A,B,C,D
Lamp Dimensions (w/o Bracket): 6.9" Diam"- 2.9"-Depth
CSA 22.2 No. 250.0
Lamp Dimensions (w/ Bracket): 5.5"-H 8" W
UL 1598
Weight: 9lb
IP66 Ingress Protection
Watts: 31.6 W @ 12 VDC | 33.6 W @ 24 VDC
T3 Temperature Rating
Voltage: 12-28V DC
LM-80 > 60,500 hrs (based on Cree long term tests)
Lumens:Spot: 2334 - Flood: 1996
Lamp Life Expectancy: 100,000 Hours
CRI: CW: 75, NW: 75, WW: 80
Amps: 2.64 A @12 VDC - 1.4 A @ 24 VDC
Light Color: CW: 6500K, NW: 4300K, WW: 3500K
Beam Type: 30В° Spot or 100В° Flood
Mounting: Magnetic Mount Trunnion U-Braclet
Materials: Machined aluminum housing - acrylic lens
Special Orders- Requirements
Housing Finish: Clear anodized finish
Contact us for special requirements
Temp Range: -40°C – +85°C
Toll Free: 1-800-369-6671
Typical Case Temperature: ~20В°C above ambient temperature
Intl: 1-903-498-3363
Wiring: 50' Lead w/ Turck Connector | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, we will ship a new
replacement.
Scroll Down to Purchase-
11/18/2014
Page: 67
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Hi-Res Image 1 - Hi-Res Image 2 - Hi-Res Image 3 -
11/18/2014
Page: 68
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Hi-Res Image 4 - Hi-Res Image 5 - Hi-Res Image 6 - Hi-Res Image 7 - Hi-Res Image 8 - Hi-Res Image 9 - Hi-Res Image 10 -
11/18/2014
Page: 69
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
400 Watt High Intensity LED Light - 52,000 Lumens - 120-277V AC - High Mast Lighting - Outdoor Rated
Part #: GAU-LTL-400W-LED
Price: $1,751.84
11/18/2014
Page: 70
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
The GAU-LTL-400W-LED High Mast LED Flood Light offers intense light output and is ideal for flood lighting, high mast lighting, light
towers, as well as industrial and outdoor lighting applications. Producing 52,000 lumens, a 3.34 amp draw at 120V, 80,000 hour service
life, 120-277 volt compatibility, and IP67 waterproof rating, this LED flood light provides operators with a rugged and powerful LED
alternative to 1000 watt metal halide lamps that uses little power and can withstand rugged use and abusive conditions.
The GAU-LTL-400W-LED LED light from Larson Electronics produces 52,000 lumens of high intensity light while drawing only 400 watts at 3.34
amps from a 120 volt electrical system. Fifty-four BridgeluxВ® high output LEDs producing 963 lumens each are arranged in rows and paired
with PMMA high purity optics to produce a well focused 25В° wide spot beam that is ideal for providing far reaching concentrated illumination
while still covering a substantial amount of area. We also offer optional optics with 10В° spot, 40В° narrow flood, 60В° flood, and 90В° wide flood beam
spreads. The spot beams are tightly focused and are designed for high elevation mounting to achieve distance, making spot versions ideal for
high mast and spots lighting. The flood beams are designed to provide more light over a larger area nearer the fixture, making flood versions
ideal for use as dedicated work and area lights.
GAU-LTL-400W-LED lights are ideal replacements for fragile and hot running 1000 watt metal halide lamps. They offer low power
requirements, high durability and a versatile mounting system that makes these LED light emitters a superior lighting solution for demanding
applications where power and reliability is critical. The heavy duty design and high power of these LED lights also makes them suitable for a
wide array of applications including but not limited to: high mast lighting, light towers, light plant LED retrofits, military, mining, industrial
manufacturing, machine visioning, security and law enforcement, commercial structure illumination, sport complexes, billboards, race tracks,
and parking lots to name a few.
Click Photo to Enlarge
The above image shows the comparison of the traditional (4) 1000 watt metal halides light fixtures mounted to a 30' light tower (left) to (4) GAU
-LTL-400W-LED 400 watt LED light fixtures mounted to a 30' light tower. The area being illuminated by each tower is 300' in length and 250' in
width. Unlike the metal halide light fixtures, there are no hot spots with these LED fixtures. This high output LED light fixture provides an even
beam spread over the targeted work area without overcast, glare, light spillage, and wasted illumination. Color rendering is also increased with
LED light plants, providing a more realistic night vision that more closely resembles natural daylight illumination.
11/18/2014
Page: 71
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks
per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the
LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output.
The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours.
Durability: As well as unparalleled heat control, the GAU-LTL-400W-LED series of LED lights from Larson Electronics also offer IP67 rated
construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature
changes of -40В° Celsius to +80В° Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast
aluminum and the optics are high transmission PMMA with 98% light transmittance. The BridgeluxВ® LEDs help these units achieve resistance
to vibrations and are rated at 70% lumen maintenance after 80,0000 hours of use. We recommend these LED lights for use in applications
where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.
Mounting: Each unit is equipped with a back mount trunnion style mounting bracket that allows the light to be attached to
flat surfaces and adjusted through 160В° of vertical movement. To adjust the unit after mounting, the user simply loosens
the set screws located on either side of the unit, moves it into the desired position, then re-tightens the screws. The base
of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and
slide the unit for precise mount positioning.
11/18/2014
Page: 72
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
GAU-LTL-400W-LED High Mast LED Light
Quick Summary
Lamp Type: BridgeluxВ® LED
1000 Watt Metal Halide Replacement
Dimensions: 24.8"-L x 12.46"-W x 3.54"-D
Ambient Op Temp -40C to +80C
Weight: 36.38 Lbs
Ideal for Light Towers & LED Retrofits
Total Watts: 400
98% Transmission High Purity PMMA Optics
Total Lumens: 52,000
Multiple LED Banks for Heat Dispersion
Luminous Efficiency: 130 lm/w
130 Lumens Per Watt Efficiency
Beam Configurations: 10В° Spot, 25В° Wide Spot, 40В° Narrow Flood,
60В° Flood, or 90В° Wide Flood
70% Lumen Retention after 80,000 Hours
LED Color Temperature: Cool White - 5500-6500K
UL1012 Compliant
LED Life Expectancy: 80,000 hours
UL60950-1 Compliant
Optics Efficiency: 98% - PMMA High Transmittance Optics
CE Certified
Led Drive %: 90%
RoHS Compliant
Voltage:120-277 VAC
IP67 Rated Waterproof
Amp Draw: 3.34A @ 120V, 1.67A @ 240V, 1.45A @ 277V
Wiring: 10' Pigtail w/ Flying Leads
Mounting: Flat Surface Trunnion Mount U-Bracket
Materials: Die Cast Aluminum Housing, PMMA Optics
Special Orders- Requirements
Housing Color: Natural Aluminum
Contact us for special requirements
Ambient Temperature Range: -40В°C to +80В°C
Toll Free: 1-800-369-6671
Waterproof Rating: IP67
Intl: 1-903-498-3363
Warranty: Yes - 3 Years
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 73
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 74
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- IES
- Hi-Res Image 1
- Hi-Res Image 2
- Hi-Res Image 3
- Hi-Res Image 4
- Hi-Res Image 5
11/18/2014
Page: 75
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
150 Watt High Intensity LED Light w/ 50 Cord Reel - 14,790 Lumens - 400W Metal Halide Equivalent
Part #: LEDP5W-30-50CR
Price: $1,665.32
Made in the USA
The Larson Electronics LEDP5W-30-TP1-50CR portable light comes complete with an IP68 rated 150 watt LED light head, and a
50' retractable cord reel. This LED light produces a 14,790 lumen flood of light capable of illuminating an area 540’ in length by 480’
feet in width. This unit can be used with 12 or 24 VDC voltages depending upon chosen configuration and is ideal for use as work area
illumination, event lighting, emergency operations lighting, or equipment lighting.
The LEDP5W-30-TP1-50CR work area light provides operators with a very versatile lighting solution for operations where easily managed mobile
illumination of large sized areas is required. An IP68 rated, 150 watt LED floodlight creates a total of 14,790 lumens of bright white light and
provides light coverage for an area 540’ long by 480’ wide. This unit can also be ordered with LEDs in spotlight configuration to produce a beam
1200’ long by 140’ in width. This light incorporates a 50 foot cord reel to easily move the light to any location.
Durability: The LEDP5W-30-TP1-50CR light incorporates a single high power LED. Thirty CREE XLamp XPGВ® five watt LEDs producing 493
lumens each are arranged in a heavy duty aluminum housing to produce a 60 degree flood beam ideal for use as mobile work and area lighting.
The LED unit is waterproof to 3 meters, sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding
environments, conditions and applications. Alternatively, the LED unit can also be ordered with optional high purity 25 degree spot beam optics to
provide a tighter, longer beam ideal for distance illumination.
LEDP5W-30-TP1-50CR lights are ideal replacements for fragile and hot running 400 watt metal halide lamps. They offer Pulse Width Modulation
control, a small profile, low power requirements, high durability and a versatile mounting system that makes these LED light emitters a superior
lighting solution for various applications where power and reliability is critical.
Connectors: These units connect the LED light head to the cord reel via a three pin Deutsch connector. There are several additional connecting
cords to choose from. These LED work lights are designed to operate with common vehicle and equipment voltages of 12 volts DC or 24 volts
DC. Operators must choose their preferred voltages below when ordering.
Available cord options include;
-16' Straight Cord Battery Clamp Connector
-16' Straight Cord Ring Terminal Connector
-16' Straight Cord 12V Cigarette Socket Plug-In
-16' Straight Cord 4-Pin Trailer Connector
11/18/2014
Page: 76
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDP5W-30-TP1-50CR LED Light
LELEDP5W-30-TP1-50CR Features
Lamp Type: High Intensity LED Light Unit
IP68 Rated Weatherproof & Waterproof
Dimensions: Telescoping- 3' to 8'
Multiple Power Connector Options
Total Watts: 150
Low Amp Draw
Lumens: 14,790
Long 50,000 Hour LED Life
Voltage: 12 or 24 VDC
Amps: 12.5 on 12 VDC - 6.25 on 24VDC
Lighting Configuration:: 25В° Spot or 60В° Flood
LED Light Color: 6000K
LED Life Expectancy: 50,000 Hours
Special Orders- Requirements
Wiring: 50ft Cord Reel
Contact us for special requirements
LED Housing Colors: Black or White
Toll Free: 1-800-369-6671
Fax: 1-903-498-3364
E-mail: [email protected]
CE Certified
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 77
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 78
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
12 LED Light Emitter - 10 Watt LEDs - 10,800 Lumen - 1800'L X 325'W Spotlight - MADE IN THE USA
Part #: LED10W-12EX
Price: $1,648.00
Buy American Compliant
The LED10W-12EX LED Light Bar is ideal for a wide variety of applications including equipment, vehicle, marine, military, law
enforcement and industrial manufacturing applications. 10,840 lumens of light output with low voltage and amp draw, a 50,000 hour
rated service life, integral thermal management and 9 to 48 volt compatibility provides operators with an extremely durable and
powerful LED lighting solution.
The LED10W-12EX LED light bar from Larson Electronics produces 10,800 lumens of bright light while drawing only 120 watts @10 amps from a
12 volt electrical system. Twelve Seoul Z-powerВ® ten watt LEDs producing a maximum of 900 lumens each are arranged in a row and paired
with high purity optics to produce a 10 degree spread spot beam approximately 1,800’ long by 325’ in width. We also offer floodlight versions with
a 35 degree beam spread to provide more light over a larger area nearer the fixture, making flood versions ideal for use as work lights. These
LED light bars are waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed from machined aluminum to
withstand the most demanding environments, conditions and applications.
An integral LED driver board programmed to control heat buildup and and allow user definable light modes, small profile, low power
requirements, high durability and a versatile mounting system makes these LED light emitters a superior lighting solution for a wide array of
applications including but not limited to: military, industrial manufacturing, machine visioning, security and law enforcement, boating, vehicles and
commercial structure illumination.
11/18/2014
Page: 79
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
monitor the heat output of the LEDs and adjust the current to control heat buildup rather than simple voltage regulators which are typically harsh
on sensitive electronics and can contribute to early LED failure. These units in effect automatically sense the temperature of each LED and adjust
the the current levels accordingly to maintain heat levels within acceptable ranges. The end result is more light with less heat and longer LED life
with higher average lumen maintenance after 50,000 hours.
Advanced Control: The preprogrammed LED drivers in this unit also provide secondary benefits through the ability to connect an external
controller and cause the light to flash, dim or brighten as desired. These units are also able to monitor and adjust input current to maintain the
correct LED voltage levels regardless of input levels across a specific range. These LEDP10W series light bars can operate on current ranging
from 9 to 50VDC without any modifications necessary as a result.
LED10W-12EX 35В° Flood Beam
(Opt)
LED10W-12EX 10В° Spot Beam
(Stnd)
Click here to learn more about the spot and flood lenses used in this LED light.
Durability: As well as unparalleled heat control, the LEDP10W series of LED light bars from Larson Electronics also offer IP68 rated construction
that is designed to withstand extremes of environmental and operating conditions. These units can withstand temperature changes of -40
degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed
from machined aluminum and the lenses are unbreakable polycarbonate. The Seoul Z-powerВ® LEDs offer resistance to shocks and vibrations
and are rated at 50,000 hours of use.
Mounting: This LED light bar is equipped with a U-shaped trunnion mounting bracket that allows mounting to any flat surface. This bracket
allows the user to adjust the light angle by simply loosening the screws located on either side of the lamp, setting the lamp in the desired position,
then retightening the screws to lock the unit in place. This mounting system will hold the set position of this unit even under high vibratory
conditions.
Note: This LED light fixture is connected to the power source via an included wiring harness and Amphenol connector. The mating Amphenol
connector has a 6 inch wire terminated in a 2 pin Deutsch connector. The included wiring harness is terminated in a 2 pin Deutsch plug and
includes 20 feet of cable, a relay and a toggle switch. The wiring harness is an additional feature included for convenience and not necessary for
installation. Operators can use existing wiring and switches, assuming they are rated for the amperage drawn by this light bar.
Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD /
LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of
a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e.
high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
11/18/2014
Page: 80
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LED10W-12EX LED Light Bar
Internal LED Driver Features
Lamp Type: Seoul Z-power LEDs
Preprogrammed LED Drivers
Dimensions: 12.7"-L 5.5"-H 3.25"-D
Solid State Thermal Management
Watts: 120
Dimming, Flash Capable
Weight: 5.9lbs
Multi-Voltage 9-50VDC
Voltage: 9-48VDC
Spot Beam: 1800'L x 325'W
Ambient Op Temp -40C to 85C
Lighting Configuration: 10В° Spot or 35В° Flood
Mounting: Trunnion
Wiring: Amphenol connector with 2 Pin Deutsch connector
Amps: 10 (on 12 volts) 5 amps (on 24 volts)
Lumens: 10,800
Special Orders- Requirements
LED Light Color: 6000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 88%
Intl: 1-903-498-3363
Materials: Machined Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black, White, Tan, Olive
CRI:70
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 81
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- SpecSheet Spanish
- Dimensional Drawing
- Manual
11/18/2014
Page: 82
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LED Light Bar w/ Trunnion U-Bracket - 60, 3-Watt LEDs - 180 Watts - 9-42V - 1400'L X 220'W Beam
Part #: LEDLB-60ET
Price: $1,497.00
Buy American Compliant
The Larson Electronics LEDLB-60ET LED Light Bar offers high light output and extreme durability combined with a versatile trunnion
wall mounting system that provides 270 degrees of adjustability. This IP68 rated LED light bar is waterproof to three meters and
produces 10,800 lumens while drawing only 180 watts of power @15 amps from a 12 volt electrical system. This light can run on any
voltage from 9 to 42 volts and provides an extremely rugged lighting solution that is ideal for use in commercial marine environments
as well as industrial and manufacturing applications such as machine vision system lighting, heavy equipment illumination, blasting
lighting and mining operations.
The LEDLB-60ET LED light bar from Larson Electronics produces a 1400' long by 220' wide light beam with 10,800 lumens of bright light while
drawing only 180 watts @15 amps from a 12 volt electrical system. Sixty Edison EdixeonВ® Emitters containing CREE EZBrightВ® three watt LEDs
producing 180 lumens each are paired with high purity 10 degree optics to produce a tightly focused spot beam with limited spread or light
spillage. We also offer optional floodlight versions with 35 degree optics to produce a wider beam spread and more light over a larger area nearer
the fixture, making flood versions ideal for use as work and area lights. These LED light bars are IP68 rated and waterproof to 3 meters, sealed
against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications. The
entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier housings, rubber isolated mounts and
unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains, sand and high winds. This light
is equipped with a trunnion mounting bracket that allows operators to adjust the light fixture through 270 degrees of movement.
This image shows a dark street, illuminated by nothing but distant
street lamps and suburban lighting.
The same street illuminated with the LEDLB-60ET, easily reaching
distances of 1400' in length. .
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 83
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Edison EdixeonВ® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels
across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as
a result. This multi-voltage capability makes these units ideal for mobile and standalone applications such as those found on commercial boats,
heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are
impractical.
LEDLB-60ET 35В° Flood Beam
(Opt)
LEDLB-60ET 10В° Spot Beam
(Stnd)
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of
environmental and operating conditions. The LED lights with the �E’ part number designation are designed for extreme durability and are larger
and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85
degrees Celsius, are waterproof to three feet and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum
and the lenses are unbreakable polycarbonate. The EdixeonВ® LEDs offer inherent LED resistance to shocks and vibrations contributing to these
units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates,
very cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme
and stored in another temperature extreme.
Mounting: Adjustable Mounting: The trunnion wall mounting design on the LEDLB-4ET allows for post-installation angle positioning. This
means that by loosening 2 thumb bolts located on either side of the light, the operator can adjust the positioning angle of this light 270 degrees.
Then he/she would simply have to tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle. We also offer a BC-2
bar clamp mounting system you can view here for even greater mounting versatility.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as
part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
11/18/2014
Page: 84
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-60ET LED Light Bar
LEDLB LED Features
LEDs: 60 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 32"-L 3.25"-H 3.56"-D
LEDs Driven At 80%
Watts: 180
-40 C~ +80C Operating Temp Range
Voltage: 9-42 VDC
Spot Beam: 1400'L x 220'W
RoHS Compliant
Flood Beam: 490'L x 450'W
Weight: 16 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
Ambient Op Temp -40C to +125C
Mounting: Adjustable Trunnion Brackett
IP68 Rated Waterproof
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps: 15 (on 12 volts) 7.5 (on 24 volts)
Lumens:10,800
Special Orders- Requirements
LED Light Color: 6000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
CE Certified
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 85
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- SpecSheet French
- SpecSheet Arabic
- Dimensional Drawing
- Manual
11/18/2014
Page: 86
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Hi-Res Image 1 - Hi-Res Image 2 - Hi-Res Image 3 - Hi-Res Image 4 - Hi-Res Image 5 - Hi-Res Image 6 - Hi-Res Image 7 -
11/18/2014
Page: 87
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
400 Watt High Intensity LED Light - 52,000 Lumens - 12-24V DC - High Mast Lighting - Outdoor Rated
Part #: GAU-LTL-400W-LED-LV
Price: $1,551.84
11/18/2014
Page: 88
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
The GAU-LTL-400W-LED-LV High Mast LED Flood Light offers intense light output and is ideal for flood lighting, high mast lighting,
light towers, as well as industrial and outdoor lighting applications. Producing 52,000 lumens, a 33.34 amp draw at 12V DC, 80,000
hour service life, 12-24 volt DC compatibility, and IP67 waterproof rating, this LED flood light provides operators with a rugged and
powerful LED alternative to 1000 watt metal halide lamps that uses little power and can withstand rugged use and abusive conditions.
The GAU-LTL-400W-LED-LV LED light from Larson Electronics produces 52,000 lumens of high intensity light while drawing only 400 watts at
33.34 amps from a 12 volt electrical system. Fifty-four BridgeluxВ® high output LEDs producing 963 lumens each are arranged in rows and
paired with PMMA high purity optics to produce a well focused 25В° wide spot beam that is ideal for providing far reaching concentrated
illumination while still covering a substantial amount of area. We also offer optional optics with 10В° spot, 40В° narrow flood, 60В° flood, and 90В°
wide flood beam spreads. The spot beams are tightly focused and are designed for high elevation mounting to achieve distance, making spot
versions ideal for high mast and spots lighting. The flood beams are designed to provide more light over a larger area nearer the fixture, making
flood versions ideal for use as dedicated work and area lights.
GAU-LTL-400W-LED-LV lights are ideal replacements for fragile and hot running 1000 watt metal halide lamps. They offer low power
requirements, high durability and a versatile mounting system that makes these LED light emitters a superior lighting solution for demanding
applications where power and reliability is critical. The heavy duty design and high power of these LED lights also makes them suitable for a
wide array of applications including but not limited to: high mast lighting, light towers, light plant LED retrofits, military, mining, industrial
manufacturing, machine visioning, security and law enforcement, commercial structure illumination, sport complexes, billboards, race tracks,
and parking lots to name a few.
Click Photo to Enlarge
The above image shows the comparison of the traditional (4) 1000 watt metal halides light fixtures mounted to a 30' light tower (left) to (4) GAU-LTL400W-LED 400 watt LED light fixtures mounted to a 30' light tower. The area being illuminated by each tower is 300' in length and 250' in width. Unlike
the metal halide light fixtures, there are no hot spots with these LED fixtures. This high output LED light fixture provides an even beam spread over the
targeted work area without overcast, glare, light spillage, and wasted illumination. Color rendering is also increased with LED light plants, providing a
more realistic night vision that more closely resembles natural daylight illumination.
11/18/2014
Page: 89
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks
per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the
LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output.
The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours.
Durability: As well as unparalleled heat control, the GAU-LTL-400W-LED-LV series of LED lights from Larson Electronics also offer IP67 rated
construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature
changes of -40В° Celsius to +80В° Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast
aluminum and the optics are high transmission PMMA with 98% light transmittance. The BridgeluxВ® LEDs help these units achieve resistance to
vibrations and are rated at 70% lumen maintenance after 80,0000 hours of use. We recommend these LED lights for use in applications where a
lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.
Mounting: Each unit is equipped with a back mount trunnion style mounting bracket that allows the light to be attached to
flat surfaces and adjusted through 160В° of vertical movement. To adjust the unit after mounting, the user simply loosens
the set screws located on either side of the unit, moves it into the desired position, then re-tightens the screws. The base
of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and
slide the unit for precise mount positioning.
11/18/2014
Page: 90
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
GAU-LTL-400W-LED-LV High Mast LED Light
Quick Summary
Lamp Type: BridgeluxВ® LED
1000 Watt Metal Halide Replacement
Dimensions: 24.8"-L x 12.46"-W x 3.54"-D
Ambient Op Temp -40C to +80C
Weight: 36.38 Lbs
Ideal for Light Towers & LED Retrofits
Total Watts: 400
98% Transmission High Purity PMMA Optics
Total Lumens: 52,000
Multiple LED Banks for Heat Dispersion
Luminous Efficiency: 130 lm/w
130 Lumens Per Watt Efficiency
Beam Configurations: 10В° Spot, 25В° Wide Spot, 40В° Narrow Flood,
60В° Flood, or 90В° Wide Flood
70% Lumen Retention after 80,000 Hours
LED Color Temperature: Cool White - 5500-6500K
UL1012 Compliant
LED Life Expectancy: 80,000 hours
UL60950-1 Compliant
Optics Efficiency: 98% - PMMA High Transmittance Optics
CE Certified
Led Drive %: 90%
RoHS Compliant
Voltage:12 or 24V DC
IP67 Rated Waterproof
Amp Draw: 33.34A @ 12V, 16.67A @ 24V
Wiring: 10' Pigtail w/ Flying Leads
Mounting: Flat Surface Trunnion Mount U-Bracket
Materials: Die Cast Aluminum Housing, PMMA Optics
Special Orders- Requirements
Housing Color: Natural Aluminum
Contact us for special requirements
Ambient Temperature Range: -40В°C to +80В°C
Toll Free: 1-800-369-6671
Waterproof Rating: IP67
Intl: 1-903-498-3363
Warranty: Yes - 3 Years
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 91
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 92
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- IES
- Hi-Res Image 1
- Hi-Res Image 2
- Hi-Res Image 3
- Hi-Res Image 4
- Hi-Res Image 5
11/18/2014
Page: 93
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
High Intensity Colored LED Light - 130 Watts - 30 LEDs - Red, Amber, Green, Blue - 120-277V AC
Part #: LEDP5W-30XC-1227
Price: $1,446.47
11/18/2014
Page: 94
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The LEDP5W-30XC-1227 LED Light offers high output from a compact form factor and is ideal for use in mining applications as well as
heavy equipment, hunting, boating, vehicle, military, law enforcement and industrial manufacturing uses. A 9040 lumen output, 1.09
amp draw, 50,000 hour service life, multiple light output color choices, and 120 to 277 volt compatibility provides operators with a
rugged and powerful LED alternative to 400 watt metal halide lamps that uses little power and can withstand rugged use and abusive
conditions.
The LEDP5W-30XC-1227 LED light from Larson Electronics produces 9040 lumens of high intensity light while drawing only 130 watts @1.09
amps from a 120 volt AC electrical system. Thirty CREE XLamp XPGВ® LEDs producing 301 lumens each are arranged in rows and paired with
high purity optics to produce a well focused 25 degree spot beam that is ideal for providing far reaching concentrated illumination while still
covering a substantial amount of area. We also offer optional floodlight versions with a 60 degree beam spread to provide more light over a larger
area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. These LED light bars are waterproof to 3 meters,
sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding environments, conditions and
applications.
LEDP5W-30XC-1227 lights are ideal replacements for fragile and hot running 400 watt metal halide lamps. They offer Pulse Width Modulation
control, a small profile, low power requirements, high durability and a versatile mounting system that makes these LED light emitters a superior
lighting solution for rough applications where power and reliability is critical. This LED fixture is offered in red, blue, green, amber, or white light
output. The heavy duty design and high power of these LED lights also makes them suitable for a wide array of applications including but not
limited to: military, industrial manufacturing, machine visioning, mining, security and law enforcement, boating, vehicles and commercial structure
illumination.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 95
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of
light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on
or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to automatically monitor and
adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDP5W-30XC-1227
series light bars can operate on current ranging from 120 to 277V AC without any modifications necessary as a result. This ability to sense and
adjust input current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise
result in burning up or premature LED failure without it.
Durability: As well as unparalleled heat control, the LEDP5W-30XC-1227 series of LED lights from Larson Electronics also offer IP68 rated
construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature
changes of -40 degrees Celsius to 80 degrees Celsius, are waterproof to three meters, and resist ingress of dust, dirt and humidity. The housings
are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XPGВ® LEDs help these units achieve
15.6Grms rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend these LED lights
for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.
Mounting: Each unit is equipped with an innovative trunnion style mounting bracket that allows the light to be attached to flat surfaces and
adjusted through 360 degrees of vertical movement. To adjust the unit after mounting, the user simply loosens the thumb screws located on
either side of the unit, moves it into the desired position, then retightens the screws. The base of the mounting trunnion is equipped with several
machined slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning.
11/18/2014
Page: 96
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDP5W-30XC-1227 High Output LED Light
Internal LED Driver Features
Lamp Type: CREE XLamp-XPGВ® LED
Automatic Current Sensing and Adjusting 9-32VDC
Dimensions: 11.69 "-L 7.54"-H 4.94"-D
Active Heat Management
Watts: 130
Ambient Op Temp -40C to +80C
Led Drive %: 90%
IP68 Tested to 3 Meters
Voltage: 120-277 VAC
Lighting Configuration: 25В° Spot or 60В° Flood
Mounting: Flat Surface 360 Degree Adjustable
Wiring: 6" cable terminated in cord cap
Cord Cap: 5-15 Wall Plug, L5-15 twistlock, L6-15 twistlock, schuko
Amps: 1.09 (on 120 volts)
Lumens: 9040 (white)
LED Light Color: White, Red, Amber, Blue, Green
LED Life Expectancy: 50,000 hours
Special Orders- Requirements
Optics Efficiency: 90%
Contact us for special requirements
Materials: Aluminum Housing, Polycarbonate Lens
Toll Free: 1-800-369-6671
Housing Colors: Black
Intl: 1-903-498-3363
Weight: 11.02 Lbs
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 97
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
150 Watts Magnetic LED Light w/ 20' Cord and L6 Plug - 30 LEDs - 14,790 Lumens - 120-277V AC
Part #: LEDP5W-30-M-1227-20L6
Price: $1,409.22
11/18/2014
Page: 98
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The LEDP5W-30-M-1227-20L6 High Output Magnetic Mount LED Light offers high output from a compact form
factor and is ideal for use in mining applications as well as heavy equipment, hunting, boating, vehicle, military,
law enforcement and industrial manufacturing uses. A 14,790 lumen output, 1.25 amp draw @ 120V, 50,000 hour
service life and 120 to 277 volt AC compatibility provides mine operators with a rugged and powerful LED
alternative to 400 watt metal halide lamps that uses little power and can withstand rugged use and abusive
conditions.
The LEDP5W-30-M-1227-20L6 magnetic LED light from Larson Electronics is an ideal replacement for fragile and hot
running 400 watt metal halide lamps. They offer Pulse Width Modulation control, a small profile, low power requirements,
high durability and a versatile mounting system that makes these LED light emitters a superior lighting solution for
demanding applications where power and reliability is critical. The heavy duty design and high power of these LED lights
also makes them suitable for a wide array of applications including but not limited to: military, industrial manufacturing,
machine visioning, security and law enforcement, boating, vehicles and commercial structure illumination. These lights
include an inline transformer and 20 feet of cord fitted with a L6-20 twist lock plug for connection to twist lock outlets.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 99
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain
advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are
typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the
temperature of each LED and adjust the energy frequency or “duty cycle” accordingly to maintain heat levels within
acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon
the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the
current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without
overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is
changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life
with an average 70% lumen maintenance after 50,000 hours.
PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to
automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a
specific range. These LEDP5W-30 series light bars can operate on current ranging from 120 to 277VAC without any
modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage
spikes and drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED
failure without it.
Magnetic Mounting: This unit is also equipped with two 200 lbs grip magentic feet, which provides a total of 400 lbs of grip
and allows operators to securely mount this unit to metallic surfaces such as tank walls or equipment, and mount the light
as a temporary work area light. This unit is lightweight and the aluminum frame and adjustable carry handle allows
operators to simply carry the unit from one location to another as needed and adjust the handle to any position for better
mounting versatility.The light housing and handle are adjustable and can be moved vertically by loosening two thumb bolts
located on either side and moving to the desired positions.
11/18/2014
Page: 100
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDP5W-30-M-1227-20L6 LED Light Bar
Internal LED Driver Features
Lamp Type: CREE XLamp-XPGВ® LED
Automatic Current Sensing and Adjusting 9-32VDC
Dimensions: 11.69 "-L 7.54"-H 4.94"-D
Active Heat Management
Watts: 150
Ambient Op Temp -40C to +80C
Led Drive %: 90%
UL1012 Compliant
Voltage: 120-277V AC
UL60950-1 Compliant
Lighting Configuration: 25В° Spot or 60В° Flood
Mounting: Magnetic Mount w/ 360 Degree Adjustable
Wiring: 20ft cable w/ L6-20 twist lock plug
Amps: 1.25 (on 120 volts)
Lumens: 14,790
Special Orders- Requirements
LED Light Color: White
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black
Weight: 13 Lbs
3 year warranty replacement on this LED light. After 30 days, the customer
ships the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, we will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 101
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Hi-Res Image 1 - Hi-Res Image 2 - Hi-Res Image 3 - Hi-Res Image 4 -
11/18/2014
Page: 102
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
160 Watt High Intensity LED Light - 14,723 Lumens - Degreed Aiming - Soft Start LEDs - 120-277V AC
Part #: LED10WSA-160-1227
Price: $1,392.20
11/18/2014
Page: 103
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The LED10WSA-160-1227 LED Light offers high output from a compact form factor and is ideal for use in mining applications as well
as heavy equipment, hunting, boating, vehicle, military, law enforcement and industrial manufacturing uses. A 14,723 lumen output,
1.34 amp draw, 50,000 hour service life and 120-277 volt AC compatibility provides operators with a rugged and powerful LED
alternative to 400 watt metal halide lamps that uses little power and can withstand rugged use and abusive mining conditions.
The LED10WSA-160-1227 high output LED light from Larson Electronics produces 14,723 lumens of high intensity light while drawing only 160
watts @1.34 amps from a 12 volt electrical system. Sixteen CREE XM-L2В® ten watt LEDs producing 920 lumens each are arranged in rows and
paired with high purity optics to produce a well focused 10В° spot beam that is ideal for providing far reaching concentrated illumination while still
covering a substantial amount of area. We also offer optional floodlight versions with a 40В° or 60В° beam spread to provide more light over a larger
area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. These LED light bars are waterproof to 3 meters,
sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding environments, conditions and
applications.
LED10WSA-160-1227 lights are ideal replacements for fragile and hot running 400 watt metal halide lamps. They offer soft start technology, a
small profile, low power requirements, high durability and a shock dampening mounting system that makes these LED light emitters a superior
lighting solution for rough applications where power and reliability is critical. The heavy duty design and high power of these LED lights also
makes them suitable for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning,
mining, security and law enforcement, boating, vehicles and commercial structure illumination.
Protection: These high output LED light bars feature soft start technology, allowing the LEDs to gradually increase to maximum intensity
instead. Low in rush current at start-up reduces wear on associated components, increasing overall life of the internal electronics and improves
downtime. Built in redundancy lessens chance of full fixture failure, while the reverse polarity operation protects the fixture from shorting the
internal components.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of
light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on
or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
Voltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels
regardless of input levels across a specific range. These LED10WSA series light bars can operate on current ranging from 100 to 277V AC
without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and
drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it.
Durability: As well as unparalleled heat control, the LED10WSA series of LED lights from Larson Electronics also offer IP69K rated construction
that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40В°C
to +80В°C, are waterproof to three meters, can withstand high pressure and high temperature wash downs, and resist ingress of dust, dirt and
humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XM-L2В® LEDs help these
units achieve up to 60Grms rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend
these LED lights for use in applications that require regular intensive cleaning and are exposed to a lot of vibration, dust, dirt, and abusive
working conditions are encountered.
Mounting: Each unit is equipped with an innovative trunnion style mounting bracket that allows the light to be attached to flat surfaces and
adjusted through 360 degrees of vertical movement. The LED light head is secured to the mounting bracket with shock dampening rotating
inserts. The insert provides precision aiming down to 1В° while providing increased longevity to the LED fixture. To vertically adjust the unit after
mounting, the user simply loosens the screws located on either side of the unit, moves it into the desired position, then retightens the screws.
The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and slide the unit
for precise mount positioning. The stainless steel trunnion bracket has preset angles marked in 5В° intervals, allowing operators to precisely aim
each fixture.
Note: The LED10WSA series feature gold plated DT connectors to provide better conductivity. Most Larson Electronics LEDP5W-30, LEDLB,
LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The
mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending
on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating,
IR/Visible combos) will have different Deutsch connectors.
Applications for the LEDP10WSA include but are not limited to mining, dump trucks, construction machinery, cement mixers, and car washes.
11/18/2014
Page: 104
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LED10WSA-160-1227 High Output LED Light
LED10WSA Series Features
Lamp Type: CREE XL-L2В® LED
Automatic Current Sensing and Adjusting
Dimensions: 14.65"-L 5.43"-H 4.80"-D
Active Heat Management
Watts: 160
Ambient Op Temp -40В°C to +80В°C
Led Drive %: 90%
IP69K High Temp High Pressure Wash Down
Voltage: Universal Voltage 100-277V AC
EMC/EMI CISPR 25 Class 3 Rated
Beam Spread: 10В° Spot, 40В° Flood, 60В° Flood, 30В°/60В° Elliptical
304 Stainless Steel Mounting Hardware
Mounting: Flat Surface 304 SS Bracket - 360 Degree Adjustable
Shock Dampening Mounting System
Wiring: Gold Plated Deutsch IPD / LADD DT04-2P connector
Amps: 1.34 (on 120 volts) - 0.67 (on 240 volts)
Lumens: 14,723
Special Orders- Requirements
LED Light Color: White
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black
Weight: 13.23 Lbs
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 105
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 106
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
16 Watt LED Strip Light for Hazardous Location Lighting - Inline Switch - 120-240V AC - Class 1 Div
Part #: HAL-24-16W-LED-ILS-1227
Price: $1,375.50
Buy American Compliant
The Larson Electronics HAL-24-16W-LED-ILS-1227 is a hazardous location lighting solution approved for Class 1 Division 2
environments and ETL 1598 compliant for use in wet locations. This powerful LED strip light produces 1208 lumens, operates from 120
-240 VAC, incorporates an on/off inline switch, and is suitable for a variety of applications.
The HAL-24-16W-LED-ILS-1227 is designed to provide a high output and ruggedly durable hazardous area lighting solution for applications
where Class 1 Division 2 compliance is required. This hazardous area linear strip light can be operated on 120 to 240 volts AC and includes 6' of
SOOW cable and is terminated in a 5-15 explosion proof straight blade plug. This light is constructed of powder coated extruded aluminum for
excellent strength and durability and is rated IP54 for protection against exposure to splashing water and limited dust ingress. These units are
configured in a strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. An inline power switch allows
operators to easily switch this C1D2 LED light on and off. The high output, cool running operation, and good color rendering properties of this
light make it an ideal replacement for older, bulkier, and less reliable HID and halogen light fixtures.
Durability/Mounting: The HAL-24-16W-LED-ILS-1227 hazardous location LED light is constructed of extruded aluminum with a tough powder
coat finish for high strength and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and basic protection
against splashing water such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where
wetness or dusty conditions are commonly encountered.
The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree
LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life
than comparable LEDs.
Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust
the light 170В° vertically for the best placement. The entire assembly weighs 1.4 lbs and measures 24.9 inches in length, and 2.68 inches wide
and 1.69 inces deep, making it ideal for mounting in areas where space is limited and a low profile fixture more readily installed.
Wiring/Power: These hazardous location LED lights are equipped with 6 feet of cord containing an explosion proof 5-15 plug rated at 15 amps.
These lights operate from 120-240 volt AC at drawing 0.014 amps on 120V AC and 0.067 amps on 240V AC.
Versatility: The HAL-24-16W-LED-ILS-1227 is ETL approved for Class 1 Division 2 groups A,B,C and D locations. This unit carries an IP54
water resistant rating ensuring protection against limited ingress from dusts, dirt, and basic protection against light water spray landing directly on
the fixture. This light is ideal for indoor or outdoor applications and industrial operations with hazardous location classification where dusty or wet
conditions are commonly encountered.
11/18/2014
Page: 107
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
HAL-24-16W-LED-ILS-1227 Hazardous Area LED Lighting
ETL Listed
Lamp Type: LED
Class 1 Division 2 Groups A,B,C,D
Dimensions: Lamp 34"-L x 3"-W x 4.69"-H
CSA 22.2 No. 250.0
Weight: 1.4lb | 0.6 k g
1598
Watts: 16.8
IP54 Ingress Protection
Voltage: 120-240 VAC
T3 Temperature Rating
Lumens: 1208
Inline Switch
Lamp Life Expectancy: 100,000 Hours
CRI: 75
Amps: 1.3 A @12 VDC | 0.66 A @ 24 VDC
Light Color: 6500K
Special Orders- Requirements
Beam Type: 100В° Flood
Contact us for special requirements
Mounting: Standard Triangle End Brackets
Toll Free: 1-800-369-6671
Temp Range: -40°C – +85°C
Intl: 1-903-498-3363
Wiring: 6' Lead w/ EPP-15A Explosion Proof Plug
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 108
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Hi-Res Image 1 - Hi-Res Image 2 - Hi-Res Image 3 -
11/18/2014
Page: 109
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Hi-Res Image 4 - Hi-Res Image 5 - Hi-Res Image 6 -
11/18/2014
Page: 110
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
150 Watts High Intensity Magnetic LED Light w/ 40' Cord and Plug - 30 LEDs - 14,790 Lumens
Part #: LEDP5W-30-M-1227-40C
Price: $1,330.92
11/18/2014
Page: 111
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The LEDP5W-30-M-1227-40C Magnetic Mount LED Light offers high output from a compact form factor and is ideal for use in mining
applications as well as heavy equipment, hunting, boating, vehicle, military, law enforcement and industrial manufacturing uses. A
14,790 lumen output, 1.25 amp draw @ 120V, 50,000 hour service life, 120 to 277 volt AC compatibility, and 40' of SOOW cable provides
mine operators with a rugged and powerful LED alternative to 400 watt metal halide lamps that uses little power and can withstand
rugged use and abusive conditions.
The LEDP5W-30-M-1227-40C LED light from Larson Electronics is an ideal replacement for fragile and hot running 400 watt metal halide lamps.
They offer Pulse Width Modulation control, a small profile, low power requirements, high durability and a versatile mounting system that makes
these LED light emitters a superior lighting solution for demanding applications where power and reliability is critical. The heavy duty design and
high power of these LED lights also makes them suitable for a wide array of applications including but not limited to: military, industrial
manufacturing, machine visioning, security and law enforcement, boating, vehicles and commercial structure illumination. These lights include an
in-line transformer and 50 feet of cord fitted with an industrial grade cord cap with 5-15 straight blade, L5-15 twist lock, L6-15 twist lock, and 2-pin
Schuko plug options.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 112
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of
light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on
or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to automatically monitor and
adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDP5W-30 series light
bars can operate on current ranging from 120 to 277VAC without any modifications necessary as a result. This ability to sense and adjust input
current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise result in
burning up or premature LED failure without it.
Durability: As well as unparalleled heat control, the LEDP5W-30 series of LED lights from Larson Electronics also offer IP68 rated construction
that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40
degrees Celsius to 80 degrees Celsius, are waterproof to three meters, and resist ingress of dust, dirt and humidity. The housings are formed
from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XPGВ® LEDs help these units achieve 15.6Grms
rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend these LED lights for use in
applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.
Magnetic Mounting: Each unit is equipped with an innovative magnetic trunnion style mounting bracket that allows the light to be attached to
ferrous surfaces and adjusted through 360 degrees of vertical movement. Two 200lb magnets provide a combined 400 lbs of magnetic gripping
force to secure the light fixture onto mounting surfaces. To adjust the unit after mounting, the user simply loosens the thumb screws located on
either side of the unit, moves it into the desired position, then re-tightens the screws. The base of the mounting trunnion is equipped with several
machined slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning.
11/18/2014
Page: 113
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDP5W-30-M-1227-40C LED Light Bar
Internal LED Driver Features
Lamp Type: CREE XLamp-XPGВ® LED
Automatic Current Sensing and Adjusting 9-32VDC
Dimensions: 11.69 "-L 7.54"-H 4.94"-D
Active Heat Management
Watts: 150
Ambient Op Temp -40C to +80C
Led Drive %: 90%
UL1012 Compliant
Voltage:120-277V AC
UL60950-1 Compliant
Lighting Configuration: 25В° Spot or 60В° Flood
Transformer cULus rated
Mounting: (2) 200lb magnets
Wiring: 40' 16/3 SOOW cable cord cap
Cord Cap: 5-15 Straight, L5-15 Twist, L6-15 Twist, Schuko
Amps: 1.25 (on 120 volts)
Lumens: 14,790
Special Orders- Requirements
LED Light Color: White
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black
Weight: 11.02 Lbs
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, we will ship a new
replacement.
Scroll Down to Purchase-
11/18/2014
Page: 114
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Hi-Res Image 1 - Hi-Res Image 2 - Hi-Res Image 3 - Hi-Res Image 4 -
11/18/2014
Page: 115
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
60 Watts Class 1 Division 2 LED Light for Hazardous Location Areas - 6' Cable w/ Flying Leads
Part #: XCANLEDAC-C1D2
Price: $1,296.00
Buy American Compliant
The XCANLEDAC-C1D2 is a multi voltage explosion proof lighting solution approved for Class 1 Division 2 environments and U.L. 1598
compliant for use in wet locations. This powerful LED light produces 2334 lumens, operates from 120-240 VAC, and is available in a
variety of configurations to allow tailoring to the specific requirements of various applications.
The XCANLEDAC-C1D2 is designed to provide a high output and ruggedly durable lighting solution for applications where Class 1 Division 2
compliance is required. This low voltage explosion proof light can be operated 120-240 volts AC current and includes 6 feet of connecting lead
with standard two wire configuration. This light is constructed of precision machined aluminum for excellent strength and durability and is rated
IP66 for ingress protection against dust and direct exposure to high pressure water spray.
The XCANLEDAC-C1D2 is also available in a 30 degree spotlight beam configuration for distance and a 100 degree configuration for wide area
illumination and has a cool white color temperature for maximum illumination. The high output, cool running operation, and good color rendering
properties of this light make it an ideal replacement for older, bulkier, and less reliable metal halide and high pressure sodium lamps.
Durability/Mounting: The XCANLEDAC-C1D2 explosion proof LED light is constructed of machined aluminum for high strength and durability.
The housing is IP66 rated, providing protection against intrusion into the housing from dusts, dirt, oils and water directly sprayed on the housing
at high pressure. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty
conditions are commonly encountered.
The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree
LEDs provide over 90 lumens per watt output and have a 80% lumen retention at 60,000 hours, giving them better efficiency and operational life
than comparable LEDs.
Mounting for this unit is provided by an included aluminum yoke that allows vertical adjustment of the light once installed. The mounting yoke is 1
inch wide and predrilled with two Вј inch holes spaced 2 inches apart for easy and secure mounting to flat surfaces. The entire assembly weighs
4.5 lbs and measures only 6.9 inches in diameter and 3 inches deep, making it ideal for mounting in areas where space is limited and a heavy
fixture cannot be installed due to lack of support.
Wiring/Power: These explosion proof LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting
configuration. These lights operate from 100 to 240 volt AC current and draw 60 watts 0.5 amps on 120 VAC and 0.25 amps on 240 VAC.
Versatility: The XCANLEDAC-C1D2 is approved for Class 1 Division 2 groups A,B,C and D locations. This unit carries an IP66 waterproof rating
ensuring protection against ingress from dusts, dirt, oils and water sprayed at high pressure directly on the fixture. This light is ideal for indoor or
outdoor applications and industrial operations with hazardous location classification where dusty or wet conditions are commonly encountered.
These lights are also available in a 30 degree spotlight configuration for long beam length or 100 degree flood configuration for wide area
coverage.
11/18/2014
Page: 116
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
XCANLEDAC-C1D2 Explosion Proof LED
HAL-31L-LV Ratings/Approvals
Lamp Type: LED
Class 1 Division 2 Groups A,B,C,D
Dimensions: Lamp 6.95" Diam"- 5.10"-Depth | Bracket- 4.63"H 7.25"
W
CSA 22.2 No. 250.0
Weight: 9.5lb | 4.3 kg
UL 1598
Watts: 60
IP66 Ingress Protection
Voltage: 100-240 VAC, 50/60 Hz
T3 Temperature Rating
Lumens: 2334
Lamp Life Expectancy: 100,000 Hours
CRI: CW: 75
Amps: 0.5 A @ 120 V
Light Color: CW: 6500K
Special Orders- Requirements
Beam Type: 30В° Spot or 100В° Flood
Contact us for special requirements
Mounting: 3/4" Conduit, Aluminum 1" Yoke with 1/4"-20 Screws
Toll Free: 1-800-369-6671
Temp Range: -40°C – +85°C
Intl: 1-903-498-3363
Wiring: 6Ft Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, we will ship a new
replacement.
Scroll Down to Purchase-
11/18/2014
Page: 117
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
60 Watts Class 1 Division 2 LED Light for Hazardous Location Areas - 6' Cable w/ Flying Leads
Part #: HAL-60W-HV
Price: $1,296.00
Buy American Compliant
The HAL-60W-HV is a multi voltage explosion proof lighting solution approved for Class 1 Division 2 environments and U.L. 1598
compliant for use in wet locations. This powerful LED light produces 2334 lumens, operates from 120-240 VAC, and is available in a
variety of configurations to allow tailoring to the specific requirements of various applications.
The HAL-60W-HV is designed to provide a high output and ruggedly durable lighting solution for applications where Class 1 Division 2
compliance is required. This low voltage explosion proof light can be operated 120-240 volts AC current and includes 6 feet of connecting lead
with standard two wire configuration. This light is constructed of precision machined aluminum for excellent strength and durability and is rated
IP66 for ingress protection against dust and direct exposure to high pressure water spray.
The HAL-60W-HV is also available in a 30 degree spotlight beam configuration for distance and a 100 degree configuration for wide area
illumination and has a cool white color temperature for maximum illumination. The high output, cool running operation, and good color rendering
properties of this light make it an ideal replacement for older, bulkier, and less reliable metal halide and high pressure sodium lamps.
Durability/Mounting: The HAL-60W-HV explosion proof LED light is constructed of machined aluminum for high strength and durability. The
housing is IP66 rated, providing protection against intrusion into the housing from dusts, dirt, oils and water directly sprayed on the housing at
high pressure. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty conditions
are commonly encountered.
The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree
LEDs provide over 90 lumens per watt output and have a 80% lumen retention at 60,000 hours, giving them better efficiency and operational life
than comparable LEDs.
Mounting for this unit is provided by an included aluminum yoke that allows vertical adjustment of the light once installed. The mounting yoke is 1
inch wide and predrilled with two Вј inch holes spaced 2 inches apart for easy and secure mounting to flat surfaces. The entire assembly weighs
4.5 lbs and measures only 6.9 inches in diameter and 3 inches deep, making it ideal for mounting in areas where space is limited and a heavy
fixture cannot be installed due to lack of support.
Wiring/Power: These explosion proof LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting
configuration. These lights operate from 100 to 240 volt AC current and draw 60 watts 0.5 amps on 120 VAC and 0.25 amps on 240 VAC.
Versatility: The HAL-60W-HV is approved for Class 1 Division 2 groups A,B,C and D locations. This unit carries an IP66 waterproof rating
ensuring protection against ingress from dusts, dirt, oils and water sprayed at high pressure directly on the fixture. This light is ideal for indoor or
outdoor applications and industrial operations with hazardous location classification where dusty or wet conditions are commonly encountered.
These lights are also available in a 30 degree spotlight configuration for long beam length or 100 degree flood configuration for wide area
coverage.
11/18/2014
Page: 118
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
HAL-60W-HV Explosion Proof LED
HAL-31L-LV Ratings/Approvals
Lamp Type: LED
Class 1 Division 2 Groups A,B,C,D
Dimensions: Lamp 6.95" Diam"- 5.10"-Depth | Bracket- 4.63"H 7.25"
W
CSA 22.2 No. 250.0
Weight: 9.5lb | 4.3 kg
UL 1598
Watts: 60
IP66 Ingress Protection
Voltage: 100-240 VAC, 50/60 Hz
T3 Temperature Rating
Lumens: 2334
Lamp Life Expectancy: 100,000 Hours
CRI: CW: 75
Amps: 0.5 A @ 120 V
Light Color: CW: 6500K
Special Orders- Requirements
Beam Type: 30В° Spot or 100В° Flood
Contact us for special requirements
Mounting: 3/4" Conduit, Aluminum 1" Yoke with 1/4"-20 Screws
Toll Free: 1-800-369-6671
Temp Range: -40°C – +85°C
Intl: 1-903-498-3363
Wiring: 6Ft Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, we will ship a new
replacement.
Scroll Down to Purchase-
11/18/2014
Page: 119
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
11/18/2014
Page: 120
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Magnetic Mount LED Blasting Light - Waterproof - 100' 600V SO Cord - 120-277V AC 4320 Lumens
Part #: BL24-LED-600V-100-HD
Price: $1,289.32
Buy American Compliant
The Larson Electronics BL24-LED-600V-100-HD LED Blasting Light offers high light output and extreme durability combined with a
versatile magnetic trunnion mounting system that provides convenience and 270 degrees of adjustability. This IP68 rated LED blasting
light is waterproof to three meters and produces 4,320 lumens . This light runs on standard 120-277 VAC and comes equipped with a
400 lbs grip magnetic mount and 100 feet of 600V SO cord.
The BL24-LED-600V-100-HD LED blasting light from Larson Electronics produces 4,320 lumens of bright light and includes an encapsulated
inline transformer to allow operation with standard 120-277 VAC. Twenty-four Edison EdixeonВ® Emitters containing CREE EZBrightВ® three watt
LEDs producing 180 lumens each are arranged in rows and paired with high purity 35 degree optics to produce an evenly spread floodlight beam
approximately 350 feet wide and 225 feet long. We also offer optional spotlight versions with 10 degree optics to produce a tighter beam with
much longer throw and higher intensity.
These LED blasting lights are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to
withstand the most demanding environments, conditions and applications. These units are constructed of extruded aluminum and feature heavier
housings, rubber isolated standard mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, and
the harsh conditions of blasting operations. This light is equipped with two 200 lbs grip magnets at the base and 100 foot cord to provide ample
mounting versatility. This magnetic mounting system allows fast and easy setup of this light and will hold the fixture in place under high vibration
conditions.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Click Photo to Enlarge
Page: 121
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This high voltage light is equipped to run directly from 120 to 277 VAC, allowing it to be operated from any standard wall outlet. The incoming AC
voltage is stepped down to 24 volt DC current output supplied to the LED blasting light. We also offer this light with an amber light output to
enhance the penetration in low visibility (due to steam or particulates) environments.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Edison EdixeonВ® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels
across a specific range. This particular blasting light is fitted with our DCP-11-DP-HD encapsulated inline transformer terminated in a 15 amp
Leviton 14W47 wet guard plug which allows operators to simply plug the unit into any standard wall outlet equipped with 120-277VAC.
BL24-LED 35В° Flood Beam
(Opt)
BL24-LED 10В° Spot Beam
(Stnd)
Durability: This series of LED blasting lights from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of
environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are
waterproof to three meters, and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum and the lenses
are unbreakable polycarbonate. The EdixeonВ® LEDs offer inherent LED resistance to shocks and vibrations contributing to these units 15.6Grms
rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates, very cold areas
and rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme and stored in
another temperature extreme.
Protective Mylar covers are available to protect the lens faceplate and catch overspray in coating applications. The adhesive backed Mylar lens
covers can be peeled off and replaced easily.
Adjustable Magnetic Mounting: The dual 200 lbs magnets and adjustable mounting design on the BL24-LED-600V-100-HD allows for easy
fixture placement and post-placement angle positioning. This means that by loosening 2 hex bolts located on either side of the light, the operator
can adjust the positioning angle of this light 270 degrees. Then he/she would simply have to tighten bolts to lock the angle in place. No tools are
required for adjusting angle. This mounting system makes this unit ideal for vehicle and equipment lighting applications where the unit can simply
be attached or removed as needed. Please note, the magnetic base on this unit increases the units overall height from 5" to 6.3" total.
Wiring: This unit is equipped with 100 feet of 600V SO cable leading to an encapsulated step down transformer. There is two feet of 600V SO
cable coming out of the inline transformer, and is terminated in a 14W47 cord cap. This inline power supply for this LED blasting light is an auto
sensing universal voltage transformer that operates on any voltage within the 100-277 volts AC 50/60Hz range. This unit allows operators to
power the LED blasting light from any 120-277V AC power source, and steps down AC voltage to 24V DC.
11/18/2014
Page: 122
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
BL24-LED-600V-100-HD LED Blasting Light
LEDLB LED Features
LEDs: 24 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 8.25"-L 6.3"-H 3.56"-D
LEDs Driven At 80%
Watts: 72
-40 C~ +80C Operating Temp Range
Voltage: 120-277 Volts AC
RoHS Compliant
Weight: 10 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
LED Chip Op Temp -40C to +125C
Mounting: Magnetic Base
IP68 Rated Waterproof to 3 meters
Wiring: 100' 600V SO Cable - Leviton 14W47 cord cap
Amps: 6 (on 12 volts) 3 (on 24 volts)
Lumens: 4,320
Special Orders- Requirements
LED Light Color: 6000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Lux Readings 10' increments: 10' - 4,450, 20' - 1,175, 30' - 525, 40'
- 275, 50' - 182, 60' - 115, 70' - 82, 80' - 62, 90' - 42, 100' - 36, 110'
- 30
CE Certified
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 123
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 124
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
150 Watts High Intensity LED Light w/ 20' Cord and Wall Plug - 30 LEDs - 14,790 Lumens - 120-277V AC
Part #: LEDP5W-30-1227-20C
Price: $1,262.83
11/18/2014
Page: 125
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The LEDP5W-30-1227-20C High Output LED Light offers high output from a compact form factor and is ideal for use in mining
applications as well as heavy equipment, hunting, boating, vehicle, military, law enforcement and industrial manufacturing uses. A
14,790 lumen output, 1.25 amp draw @ 120V, 50,000 hour service life and 120 to 277 volt AC compatibility provides mine operators with
a rugged and powerful LED alternative to 400 watt metal halide lamps that uses little power and can withstand rugged use and abusive
conditions.
The LEDP5W-30-1227-20C LED light from Larson Electronics is an ideal replacement for fragile and hot running 400 watt metal halide lamps.
They offer Pulse Width Modulation control, a small profile, low power requirements, high durability and a versatile mounting system that makes
these LED light emitters a superior lighting solution for demanding applications where power and reliability is critical. The heavy duty design and
high power of these LED lights also makes them suitable for a wide array of applications including but not limited to: military, industrial
manufacturing, machine visioning, security and law enforcement, boating, vehicles and commercial structure illumination. These lights include an
inline transformer and 20 feet of cord fitted with a straight blade plug for connection to standard wall outlets.
Click Photo to Enlarge
Click Photo to Enlarge
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of
light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on
or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to automatically monitor and
adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDP5W-30 series light
bars can operate on current ranging from 120 to 277VAC without any modifications necessary as a result. This ability to sense and adjust input
current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise result in
burning up or premature LED failure without it.
11/18/2014
Page: 126
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDP5W-30-1227-20C LED Light Bar
Internal LED Driver Features
Lamp Type: CREE XLamp-XPGВ® LED
Automatic Current Sensing and Adjusting 9-32VDC
Dimensions: 11.69 "-L 7.54"-H 4.94"-D
Active Heat Management
Watts: 150
Ambient Op Temp -40C to +80C
Led Drive %: 90%
UL1012 Compliant
Voltage:120-277V AC
UL60950-1 Compliant
Lighting Configuration: 25В° Spot or 60В° Flood
Transformer cULus rated
Mounting: Flat Surface 360 Degree Adjustable
Wiring: 20ft cable w/ 5-15 wall plug
Amps: 1.25 (on 120 volts)
Lumens: 14,790
Special Orders- Requirements
LED Light Color: White
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black
Weight: 11.02 Lbs
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, we will ship a new
replacement.
Scroll Down to Purchase-
11/18/2014
Page: 127
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
160 Watt High Intensity LED Light - 16 LEDs - 14,723 Lumens - Degreed Aiming - Soft Start LEDs
Part #: LED10WSA-160
Price: $1,241.89
11/18/2014
Page: 128
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The LED10WSA-160 LED Light offers high output from a compact form factor and is ideal for use in mining applications as well as
heavy equipment, hunting, boating, vehicle, military, law enforcement and industrial manufacturing uses. A 14,723 lumen output, 13.34
amp draw, 50,000 hour service life and 12-24 volt compatibility provides operators with a rugged and powerful LED alternative to 400
watt metal halide lamps that uses little power and can withstand rugged use and abusive mining conditions.
The LED10WSA-160 high output LED light from Larson Electronics produces 14,723 lumens of high intensity light while drawing only 160 watts
@13.34 amps from a 12 volt electrical system. Sixteen CREE XM-L2В® ten watt LEDs producing 920 lumens each are arranged in rows and
paired with high purity optics to produce a well focused 10В° spot beam that is ideal for providing far reaching concentrated illumination while still
covering a substantial amount of area. We also offer optional floodlight versions with a 40В° or 60В° beam spread to provide more light over a larger
area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. These LED light bars are waterproof to 3 meters,
sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding environments, conditions and
applications.
LED10WSA-160 lights are ideal replacements for fragile and hot running 400 watt metal halide lamps. They offer soft start technology, a small
profile, low power requirements, high durability and a shock dampening mounting system that makes these LED light emitters a superior lighting
solution for rough applications where power and reliability is critical. The heavy duty design and high power of these LED lights also makes them
suitable for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning, mining, security and law
enforcement, boating, vehicles and commercial structure illumination.
Protection: These high output LED light bars feature soft start technology, allowing the LEDs to gradually increase to maximum intensity
instead. Low in rush current at start-up reduces wear on associated components, increasing overall life of the internal electronics and improves
downtime. Built in redundancy lessens chance of full fixture failure, while the reverse polarity operation protects the fixture from shorting the
internal components.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of
light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on
or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
Voltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels
regardless of input levels across a specific range. These LED10WSA series light bars can operate on current ranging from 11 to 65 VDC without
any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops
that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it.
Durability: As well as unparalleled heat control, the LED10WSA series of LED lights from Larson Electronics also offer IP69K rated construction
that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40В°C
to +80В°C, are waterproof to three meters, can withstand high pressure and high temperature wash downs, and resist ingress of dust, dirt and
humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XM-L2В® LEDs help these
units achieve up to 60Grms rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend
these LED lights for use in applications that require regular intensive cleaning and are exposed to a lot of vibration, dust, dirt, and abusive
working conditions are encountered.
Mounting: Each unit is equipped with an innovative trunnion style mounting bracket that allows the light to be attached to flat surfaces and
adjusted through 360 degrees of vertical movement. The LED light head is secured to the mounting bracket with shock dampening rotating
inserts. The insert provides precision aiming down to 1В° while providing increased longevity to the LED fixture. To vertically adjust the unit after
mounting, the user simply loosens the screws located on either side of the unit, moves it into the desired position, then retightens the screws.
The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and slide the unit
for precise mount positioning. The stainless steel trunnion bracket has preset angles marked in 5В° intervals, allowing operators to precisely aim
each fixture.
Note: The LED10WSA series feature gold plated DT connectors to provide better conductivity. Most Larson Electronics LEDP5W-30, LEDLB,
LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The
mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending
on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating,
IR/Visible combos) will have different Deutsch connectors.
Applications for the LEDP10WSA include but are not limited to mining, dump trucks, construction machinery, cement mixers, and car washes.
11/18/2014
Page: 129
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LED10WSA-160 High Output LED Light
LED10WSA Series Features
Lamp Type: CREE XL-L2В® LED
Automatic Current Sensing and Adjusting
Dimensions: 14.65"-L 5.43"-H 4.80"-D
Active Heat Management
Watts: 160
Ambient Op Temp -40В°C to +80В°C
Led Drive %: 90%
IP69K High Temp High Pressure Wash Down
Voltage: Universal Voltage 11-65V DC
EMC/EMI CISPR 25 Class 3 Rated
Beam Spread: 10В° Spot, 40В° Flood, 60В° Flood, 30В°/60В° Elliptical
304 Stainless Steel Mounting Hardware
Mounting: Flat Surface 304 SS Bracket - 360 Degree Adjustable
Shock Dampening Mounting System
Wiring: Gold Plated Deutsch IPD / LADD DT04-2P connector
Amps: 13.34 (on 12 volts) - 6.67 (on 24 volts)
Lumens: 14,723
Special Orders- Requirements
LED Light Color: White
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black
Weight: 13.23 Lbs
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 130
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Hi-Res Image 1
- Hi-Res Image 2
- Hi-Res Image 3
11/18/2014
Page: 131
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
150 Watt LED High Bay Light Fixture - 120-277VAC - 400W Metal Halide Equivalent - 14,790 Lumens
Part #: GAU-HB-30X5W-1227
Price: $1,222.25
11/18/2014
Page: 132
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The GAU-HB-30X5W-1227 LED High Bay Light offers high output and energy efficient alternative to traditional general area luminaries.
LED technology and compact design makes this lamp an excellent energy efficient upgrade option for bulky and high maintenance
cost older fixtures. A 14,790 lumen output, 1.25 amp draw @ 120V, 50,000 hour service life, and 120 to 277 volt AC compatibility
provides operators with a rugged and powerful LED alternative to 400 watt metal halide lamps that uses little power and can withstand
rugged use and abusive conditions.
The GAU-HB-30X5W-1227 LED high bay light is anideal replacement for fragile and hot running 400 watt metal halide lamps. They offer Pulse
Width Modulation dimming control, a small profile, low power requirements, high durability and a versatile mounting system that makes these
LED light emitters a superior lighting solution for industrial applications where power and reliability is critical. The heavy duty design and high
power of these high bay lights also makes them suitable for a wide array of applications including but not limited to: military, manufacturing,
machine visioning, security and law enforcement, and commercial structure illumination.
Click Photo to Enlarge
Click Photo to Enlarge
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of
light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on
or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to automatically monitor and
adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LED lights can operate on
current ranging from 120 to 277VAC without any modifications necessary as a result. This ability to sense and adjust input current also provides
protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature
LED failure without it.
11/18/2014
Page: 133
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
GAU-HB-30X5W-1227
Internal LED Driver Features
Lamp Type: CREE XLamp-XPGВ® LED
Automatic Current Sensing and Adjusting 9-32VDC
Dimensions: 11.69 "-L 7.54"-H 4.94"-D
Active Heat Management
Watts: 150
Ambient Op Temp -40C to +80C
Led Drive %: 90%
Voltage: 120-277V AC
Lighting Configuration: 60В° Flood or 25В° Spot
Mounting: Flat Surface 360 Degree Adjustable
Wiring: 10ft cable w/ flying leads
Amps: 1.25 (on 120 volts)
Lumens: 14,790
Special Orders- Requirements
LED Light Color: White
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black
Weight: 11.02 Lbs
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 134
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 135
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
33 Watt High Voltage LED Fixture for Hazardous Location Lighting - 120-277 w/Stepdown Transformer Part #: HAL-48-33W-LED-1227
Price: $1,214.40
Buy American Compliant
The Larson Electronics HAL-48-33W-LED-1227 is a high voltage hazardous location lighting solution approved for Class 1 Division 2
environments and 1598 compliant for use in wet locations. This powerful 46.88" long LED strip light produces 2416 lumens, operates
from 120 to 277 VAC, and is suitable for a variety of applications.
The HAL-48-33W-LED-1227 is designed to provide a high output and ruggedly durable lighting solution for applications where Class1 Division 2
compliance is required. This explosion proof light can be operated with voltages ranging from 120 to 277 and includes 6 feet of connecting lead
with standard two wire configuration. This light is constructed of powder coated extruded aluminum for excellent strength and durability and is
rated IP54 for protection against exposure to splashing water and limited dust ingress. These units are configured in a 46.88" long strip or "bar"
profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool running operation, and good color
rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable HID and halogen light fixtures.
Durability/Mounting: The HAL-48-33W-LED-1227 hazardous location LED light is constructed of extruded aluminum with a tough powder coat
finish for high strength and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and basic protection against
splashing water such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or
dusty conditions are commonly encountered.
The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree
LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life
than comparable LEDs.
Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust
the light 170В° vertically for the best placement. The entire assembly weighs 2.8 lbs and measures 46.88 inches in length, and 2.68 inches wide
and 1.69 inches deep, making it ideal for mounting in areas where space is limited and a low profile fixture more readily installed.
Wiring/Power: These hazardous area LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting
configuration. These lights operate from 120 to 277 volt AC current.
Versatility: The HAL-48-33W-LED-1227 is ETL approved for Class 1 Division 2 groups A, B, C and D locations. This unit carries an IP54 water
resistant rating ensuring protection against limited ingress from dusts, dirt, and basic protection against light water spray landing directly on the
fixture. This light is ideal for indoor or outdoor applications and industrial operations with hazardous location classification where dusty or wet
conditions are commonly encountered.
11/18/2014
Page: 136
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
HAL-48-33W-LED-1227 Hazardous Location LED Lighting
ETL Listed
Lamp Type: LED
Class 1 Division 2 Groups A,B,C,D
Dimensions: Lamp 46.88"-L 2.68" -W 1.69"- D
CSA 22.2 No. 250.0
Weight: 2.8lb | 1.2 k g
598
Watts: 33.6
IP54 Ingress Protection
Voltage: 120-277 VAC
T3 Temperature Rating
Lumens: 2416
Lamp Life Expectancy: 100,000 Hours
CRI: 75
Amps: 2.64 A @12 VDC | 1.32 A @ 24 VDC
Light Color: 6500K
Special Orders- Requirements
Beam Type: 100В° Flood
Contact us for special requirements
Mounting: Standard Triangle End Brackets
Toll Free: 1-800-369-6671
Temp Range: -40°C – +85°C
Intl: 1-903-498-3363
Wiring: 6Ft Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 137
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- STEP
- DXF
- Hi-Res Image 1 -
11/18/2014
Page: 138
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Hi-Res Image 2 - Hi-Res Image 3 - Hi-Res Image 4 - Hi-Res Image 5 - Hi-Res Image 6 - Hi-Res Image 7 - Hi-Res Image 8 - Hi-Res Image 9 -
11/18/2014
Page: 139
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
33 Watt High Voltage LED Fixture for Hazardous Location Lighting - 120-240V w/ Stepdown Transformer
Part #: GSLEDIP48-C1D2-1227
Price: $1,214.40
Buy American Compliant
The Larson Electronics GSLEDIP48-C1D2-1227 is a high voltage hazardous location lighting solution approved for Class 1 Division 2
environments and 1598 compliant for use in wet locations. This powerful 46.88" long LED strip light produces 2416 lumens, operates
from 120 to 240 VAC, and is suitable for a variety of applications.
The GSLEDIP48-C1D2-1227 is designed to provide a high output and ruggedly durable lighting solution for applications where Class1 Division 2
compliance is required. This explosion proof light can be operated with voltages ranging from 120V to 240V AC and includes 6 feet of connecting
SOOW cable and terminated in a 15 amp 5-15 explosion proof plug. This light is constructed of powder coated extruded aluminum for excellent
strength and durability and is rated IP54 for protection against exposure to splashing water and limited dust ingress. These units are configured
in a 46.88" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool running
operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable HID and halogen light
fixtures.
Durability/Mounting: The GSLEDIP48-C1D2-1227 hazardous location LED light is constructed of extruded aluminum with a tough powder coat
finish for high strength and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and basic protection against
splashing water such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or
dusty conditions are commonly encountered.
The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree
LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life
than comparable LEDs.
Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust
the light 170В° vertically for the best placement. The entire assembly weighs 2.8 lbs and measures 46.88 inches in length, and 2.68 inches wide
and 1.69 inches deep, making it ideal for mounting in areas where space is limited and a low profile fixture more readily installed.
Wiring/Power: These hazardous area LED lights are equipped with 6 feet of SOOW cord and is terminated in a ECP1523 explosion proof plug.
These lights operate from 120 to 240 volt AC current.
Versatility: The GSLEDIP48-C1D2-1227 is ETL approved for Class 1 Division 2 groups A, B, C and D locations. This unit carries an IP54 water
resistant rating ensuring protection against limited ingress from dusts, dirt, and basic protection against light water spray landing directly on the
fixture. This light is ideal for indoor or outdoor applications and industrial operations with hazardous location classification where dusty or wet
conditions are commonly encountered.
11/18/2014
Page: 140
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
GSLEDIP48-C1D2-1227 Hazardous Location LED Lighting
ETL Listed
Lamp Type: LED
Class 1 Division 2 Groups A,B,C,D
Dimensions: Lamp 46.88"-L 2.68" -W 1.69"- D
CSA 22.2 No. 250.0
Weight: 2.8lb | 1.2 k g
598
Watts: 33.6
IP54 Ingress Protection
Voltage: 120-240 VAC
T3 Temperature Rating
Lumens: 2416
Lamp Life Expectancy: 100,000 Hours
CRI: 75
Amps: 2.64 A @12 VDC | 1.32 A @ 24 VDC
Light Color: 6500K
Special Orders- Requirements
Beam Type: 100В° Flood
Contact us for special requirements
Mounting: Standard Triangle End Brackets
Toll Free: 1-800-369-6671
Temp Range: -40°C – +85°C
Intl: 1-903-498-3363
Wiring: 6Ft Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 141
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 142
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Hi-Res Image 1
- Hi-Res Image 2
- Hi-Res Image 3
- Hi-Res Image 4
- Hi-Res Image 5
- Hi-Res Image 6
- Hi-Res Image 7
- Hi-Res Image 8
11/18/2014
Page: 143
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Hi-Res Image 9
11/18/2014
Page: 144
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
31 Watt Low Voltage LED Fixture for Hazardous Location Lighting - Class 1 Division 2 Approved
Part #: XCANLED-DC
Price: $1,212.00
11/18/2014
Page: 145
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The XCANLED-DC is a low voltage hazardous location lighting solution approved for Class 1 Division 2 environments and UL 1598
compliant for use in wet locations. This powerful LED light produces 2334 lumens, operates from 12 or 24 VDC, and is available in a
variety of configurations to allow tailoring to the specific requirements of various applications.
The XCANLED-DC is designed to provide a high output and ruggedly durable lighting solution for applications where Class 1 Division 2
compliance is required. This low voltage explosion proof light can be operated with either 12 or 24 volt DC current and includes 6 feet of
connecting lead with standard two wire configuration. This light is constructed of precision machined aluminum for excellent strength and
durability, clear anodized for corrosion resistance, and is IP66 rated for ingress protection against dust and direct exposure to high pressure
water spray.
The XCANLED-DC is also available in a 30 degree narrow beam configuration for distance and a 100 degree configuration for wide area
illumination. The light output is offered in 6500K cool white, 4300K neutral white, and 3500K warm white color temperatures for maximum
illumination. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older,
bulkier, and less reliable metal halide and high pressure sodium lamps.
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 146
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Durability: The XCANLED-DC hazardous location LED light is constructed of machined aluminum for high strength and durability with a clear
anodized finish for increased corrosion resistance. The housing is IP66 rated, providing protection against intrusion into the housing from dusts,
dirt, oils and water directly sprayed on the housing at high pressure. This LED light is equipped with an impact resistant acrlyic lens for increased
safety compared to glass lenses. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness
or dusty conditions are commonly encountered.
High Output LEDs: The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme
long life. These Cree LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 100,000 hours, giving them better
efficiency and operational life than comparable LEDs. These lights are available in a 30 degree spotlight configuration for long beam length or
100 degree flood configuration for wide area coverage. The HAL-31L-LV has multiple color temperature options and is offered in 6500K cool
white with a color rendering of 75, 4300K neutral white with a color rendering of 75, and 3500K warm white with a color rendering of 80.
Mounting: Mounting for this unit is provided by an included aluminum yoke that allows vertical adjustment of the light once installed. The
mounting yoke is 1 inch wide and predrilled with two Вј inch holes spaced 2 inches apart for easy and secure mounting to flat surfaces. The
entire assembly weighs 4.5 lbs and measures only 6.9 inches in diameter and 3 inches deep, making it ideal for mounting in areas where space
is limited and a heavy fixture cannot be installed due to lack of support.
Wiring/Power: These hazardous location LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting
configuration. These lights operate from 12 to 24 volt DC current and draw 31 watts 2.64 amps on 12 VDC and 33 Watts 1.4 amps on 24 VDC.
Versatility: The XCANLED-DC is ETL listed for Class 1 Division 2 groups A,B,C and D locations, certified to CSA 22.2 No. 250.0, and conforms
to UL 1598. This unit carries an IP66 waterproof rating ensuring protection against ingress from dusts, dirt, oils and water sprayed at high
pressure directly on the fixture. This light is ideal for indoor or outdoor applications, food processing, and industrial operations with hazardous
location classification where dusty or wet conditions are commonly encountered.
11/18/2014
Page: 147
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
XCANLED-DC Hazardous Location LED Light
ETL Listed
Lamp Type: LED
Class 1 Division 2 Groups A,B,C,D
Lamp Dimensions (w/o Bracket): 6.9" Diam"- 2.9"-Depth
CSA 22.2 No. 250.0
Lamp Dimensions (w/ Bracket): 4.63"-H 7.25" W"
UL 1598
Weight: 4.5lb | 2.05 k g
IP66 Ingress Protection
Watts: 31.6 W @ 12 VDC | 33.6 W @ 24 VDC
T3 Temperature Rating
Voltage: 12-28V DC
LM-80 > 60,500 hrs (based on Cree long term tests)
Lumens: Spot: 2334 - Flood: 1996
Lamp Life Expectancy: 100,000 Hours
CRI: CW: 75, NW: 75, WW: 80
Amps: 2.64 A @12 VDC - 1.4 A @ 24 VDC
Light Color: CW: 6500K, NW: 4300K, WW: 3500K
Beam Type: 30В° Spot or 100В° Flood
Mounting: 1/4” - 20 Screws /Aluminum 1” Yoke
Materials: Machined aluminum housing - acrylic lens
Special Orders- Requirements
Housing Finish: Clear anodized finish
Contact us for special requirements
Temp Range: -40°C – +85°C
Toll Free: 1-800-369-6671
Typical Case Temperature: ~20В°C above ambient temperature
Intl: 1-903-498-3363
Wiring: 6Ft Lead w/ Turck Connector | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, we will ship a new
replacement.
Scroll Down to Purchase-
11/18/2014
Page: 148
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 149
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
31 Watt Low Voltage LED Fixture for Hazardous Location Lighting - Class 1 Division 2 Approved
Part #: HAL-31L-LV
Price: $1,212.00
11/18/2014
Page: 150
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The HAL-31L-LV is a low voltage hazardous location lighting solution approved for Class 1 Division 2 environments and UL 1598
compliant for use in wet locations. This powerful LED light produces 2334 lumens, operates from 12 or 24 VDC, and is available in a
variety of configurations to allow tailoring to the specific requirements of various applications.
The HAL-31L-LV is designed to provide a high output and ruggedly durable lighting solution for applications where Class 1 Division 2 compliance
is required. This low voltage explosion proof light can be operated with either 12 or 24 volt DC current and includes 6 feet of connecting lead with
standard two wire configuration. This light is constructed of precision machined aluminum for excellent strength and durability, clear anodized for
corrosion resistance, and is IP66 rated for ingress protection against dust and direct exposure to high pressure water spray.
The HAL-31L-LV is also available in a 30 degree spotlight beam configuration for distance and a 100 degree configuration for wide area
illumination. The light output is offered in 6500K cool white, 4300K neutral white, and 3500K warm white color temperatures for maximum
illumination. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older,
bulkier, and less reliable metal halide and high pressure sodium lamps.
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 151
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Durability: The HAL-31L-LV hazardous location LED light is constructed of machined aluminum for high strength and durability with a clear
anodized finish for increased corrosion resistance. The housing is IP66 rated, providing protection against intrusion into the housing from dusts,
dirt, oils and water directly sprayed on the housing at high pressure. This LED light is equipped with an impact resistant acrlyic lens for increased
safety compared to glass lenses. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness
or dusty conditions are commonly encountered.
High Output LEDs: The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme
long life. These Cree LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 100,000 hours, giving them better
efficiency and operational life than comparable LEDs. These lights are available in a 30 degree spotlight configuration for long beam length or
100 degree flood configuration for wide area coverage. The HAL-31L-LV has multiple color temperature options and is offered in 6500K cool
white with a color rendering of 75, 4300K neutral white with a color rendering of 75, and 3500K warm white with a color rendering of 80.
Mounting: Mounting for this unit is provided by an included aluminum yoke that allows vertical adjustment of the light once installed. The
mounting yoke is 1 inch wide and predrilled with two Вј inch holes spaced 2 inches apart for easy and secure mounting to flat surfaces. The
entire assembly weighs 4.5 lbs and measures only 6.9 inches in diameter and 3 inches deep, making it ideal for mounting in areas where space
is limited and a heavy fixture cannot be installed due to lack of support.
Wiring/Power: These hazardous location LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting
configuration. These lights operate from 12 to 24 volt DC current and draw 31 watts 2.64 amps on 12 VDC and 33 Watts 1.4 amps on 24 VDC.
Versatility: The HAL-31L-LV is ETL listed for Class 1 Division 2 groups A,B,C and D locations, certified to CSA 22.2 No. 250.0, and conforms to
UL 1598. This unit carries an IP66 waterproof rating ensuring protection against ingress from dusts, dirt, oils and water sprayed at high pressure
directly on the fixture. This light is ideal for indoor or outdoor applications, food processing, and industrial operations with hazardous location
classification where dusty or wet conditions are commonly encountered.
11/18/2014
Page: 152
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
HAL-31L-LV Hazardous Location LED Light
ETL Listed
Lamp Type: LED
Class 1 Division 2 Groups A,B,C,D
Lamp Dimensions (w/o Bracket): 6.9" Diam"- 2.9"-Depth
CSA 22.2 No. 250.0
Lamp Dimensions (w/ Bracket): 4.63"-H 7.25" W"
UL 1598
Weight: 4.5lb | 2.05 k g
IP66 Ingress Protection
Watts: 31.6 W @ 12 VDC | 33.6 W @ 24 VDC
T3 Temperature Rating
Voltage: 12-28V DC
LM-80 > 60,500 hrs (based on Cree long term tests)
Lumens: Spot: 2334 - Flood: 1996
Lamp Life Expectancy: 100,000 Hours
CRI: CW: 75, NW: 75, WW: 80
Amps: 2.64 A @12 VDC - 1.4 A @ 24 VDC
Light Color: CW: 6500K, NW: 4300K, WW: 3500K
Beam Type: 30В° Spot or 100В° Flood
Mounting: 1/4” - 20 Screws /Aluminum 1” Yoke
Materials: Machined aluminum housing - acrylic lens
Special Orders- Requirements
Housing Finish: Clear anodized finish
Contact us for special requirements
Temp Range: -40°C – +85°C
Toll Free: 1-800-369-6671
Typical Case Temperature: ~20В°C above ambient temperature
Intl: 1-903-498-3363
Wiring: 6Ft Lead w/ Turck Connector | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, we will ship a new
replacement.
Scroll Down to Purchase-
11/18/2014
Page: 153
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
11/18/2014
Page: 154
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- STEP
- DXF
11/18/2014
Page: 155
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
UL Listed LED Blasting Light - 40, 3-Watt LEDs - 120VAC - IP68 Rated - Magnetic Mount
Part #: BL40-LED
Price: $1,211.26
Buy American Compliant
The Larson Electronics BL40-LED LED blasting light offers high light output and extreme durability combined with versatile magnetic
mounting and power options. This IP68 rated LED blasting light is waterproof to three meters and produces 7,200 lumens while
drawing only 120 watts of power @10 amps from a 12 volt electrical system. This light can run on any voltage from 9 to 42 volts and an
included inline transformer allows operation with common 120VAC household current as well.
The BL40-LED LED blasting light from Larson Electronics produces a flood of light 375 feet long by 260 feet wide with 7,200 lumens of bright
light while drawing only 120 watts @10 amps from a 12 volt electrical system. Optional 10 degree spot beam versions are available that produce
a beam 1350' long by 330' wide. Forty Edison EdixeonВ® Emitters containing CREE EZBrightВ® three watt LEDs producing 180 lumens each are
paired with high purity 35 degree optics to produce a powerful flood of light ideal for work in blasting applications.
These LED blasting lights are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to
withstand the most demanding environments, conditions and applications. These units are constructed of extruded aluminum and feature heavier
housings, rubber isolated standard mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, and
the harsh conditons of blasting operations. This light is equipped with a 300lbs grip magnetic mount base and a 50 foot cord to provide ample
mounting versatility. This magnetic base allows fast and easy setup of this light and will hold the fixture in place even under high vibration
conditions.
11/18/2014
Page: 156
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This low voltage light is equipped with a DCP-11-DP inline transformer which allows these units to be operated with standard 120V-277V AC
current commonly found in wall outlets. This unit can also be unplugged from the transformer and run directly from 9-42 volts DC, allowing it to be
operated from any vehicle or equipment's electrical system. We also offer this light with an amber light output to enhance the penetration in low
visibility (due to steam or particulates) environments. We also offer the unit with green light output or standard white. Please choose your color
below when ordering.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Edison EdixeonВ® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels
across a specific range. These light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as a result. This
multi-voltage capability makes these units ideal for mobile and stand alone applications such as those found on commercial boats, heavy
equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are
impractical. This particular blasting light is equipped with our DCP-11-DP transformer which allows operators to simply plug the unit into any
standard wall outlet equipped with 120-277VAC, or they can unplug the transformer and connect the light directly to a 9-42VDC power source.
BL40-LED 35В° Flood Beam
(Stnd)
BL40-LED 10В° Spot Beam
(Opt)
Durability: This series of LED blasting lights from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of
environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are
waterproof to three meters, and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum and the lenses
are unbreakable polycarbonate. The EdixeonВ® LEDs offer inherent LED resistance to shocks and vibrations contributing to these units 15.6Grms
rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates, very cold areas
and rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme and stored in
another temperature extreme.
Protective Mylar covers are available to protect the lens faceplate and catch overspray in coating applications. The adhesive backed Mylar lens
covers can be peeled off and replaced easily.
Mounting: The three 100 lbs magnets and trunnion mounting design on the BL40-LED LED blasting light allows for easy fixture placement and
post-placement angle positioning. This means that by loosening 2 thumb bolts located on either side of the light, the operator can adjust the
positioning angle of this light 270 degrees. Then he/she would simply have to tighten thumb bolts to lock the angle in place. No tools are required
for adjusting angle. This mounting system makes this unit ideal for vehicle and equipment lighting applications where the unit can simply be
attached or removed as needed.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as
part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors. This particular blasting light is equipped with
our DCP-11-DP transformer which allows operators to simply plug the unit into any standard wall outlet equipped with 120-277VAC, or they can
unplug the transformer and connect the light directly to a 9-42VDC power source.
11/18/2014
Page: 157
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
BL40-LED LED Blasting Light
LEDLB LED Features
LEDs: 40 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 22"-L 3"-H 3.56"-D
LEDs Driven At 80%
Watts: 120
-40 C~ +80C Operating Temp Range
Voltage: 9-42 VDC
RoHS Compliant
Weight: 11 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
Ambient Op Temp -40C to +125C
Mounting: 300lbs Grip Magnetic Base/Adjustable Trunnion
IP68 Rated Waterproof to 3 Meters
Wiring: 50ft Cord, Inline Transformer with Standard Plug
Amps: 10 (on 12 volts) 5 (on 24 volts)
Lumens: 7,200
Special Orders- Requirements
LED Light Color: 6000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
[email protected] 10' Increments: 10' - 7,500, 20' - 2,200, 30' - 1,010, 40' - 560,
50' - 370, 60' - 262, 70' - 190, 80' - 145, 90' - 115, 100' - 93, 110' - 77
UL Certified
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 158
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 159
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
High Intensity LED Light - 150 Watts - 30 LEDs - 14,790 Lumens - 120-277V AC - Halide Equiv
Part #: LEDP5W-30-1227
Price: $1,202.83
11/18/2014
Page: 160
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The LEDP5W-30-1227 LED Light offers high output from a compact form factor and is ideal for use in mining applications as well as
heavy equipment, hunting, boating, vehicle, military, law enforcement and industrial manufacturing uses. A 14,790 lumen output, 1.25
amp draw @ 120V, 50,000 hour service life and 120 to 277 volt AC compatibility provides mine operators with a rugged and powerful
LED alternative to 400 watt metal halide lamps that uses little power and can withstand rugged use and abusive conditions.
LEDP5W-30-1227 lights are ideal replacements for fragile and hot running 400 watt metal halide lamps. They offer Pulse Width Modulation
control, a small profile, low power requirements, high durability and a versatile mounting system that makes these LED light emitters a superior
lighting solution for rough applications where power and reliability is critical. The heavy duty design and high power of these LED lights also
makes them suitable for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning, security and
law enforcement, boating, vehicles and commercial structure illumination.
Click Photo to Enlarge
Click Photo to Enlarge
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of
light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on
or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to automatically monitor and
adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDP5W-30 series light
bars can operate on current ranging from 120 to 277VAC without any modifications necessary as a result. This ability to sense and adjust input
current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise result in
burning up or premature LED failure without it.
11/18/2014
Page: 161
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDP5W-30-1227 LED Light Bar
Internal LED Driver Features
Lamp Type: CREE XLamp-XPGВ® LED
Automatic Current Sensing and Adjusting 9-32VDC
Dimensions: 11.69 "-L 7.54"-H 4.94"-D
Active Heat Management
Watts: 150
Ambient Op Temp -40C to +80C
Led Drive %: 90%
UL1012 Compliant
Voltage: 120-277V AC
UL60950-1 Compliant
Lighting Configuration: 25В° Spot or 60В° Flood
Transformer cULus rated
Mounting: Flat Surface 360 Degree Adjustable
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps: 1.25 (on 120 volts)
Lumens: 14,790
Special Orders- Requirements
LED Light Color: White
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black
Weight: 11.02 Lbs
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 162
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
11/18/2014
Page: 163
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
72 Watt Colored LED Light Emitter - Adjustable Trunnion Bracket Mount - 120-277V AC
Part #: LEDLB-24CT-1227
Price: $1,185.00
Buy American Compliant
The Larson Electronics LEDLB-24CT-1227 LED Light Bar offers high light output and extreme durability combined with a versatile
trunnion wall mounting system that provides 270 degrees of adjustability. This IP68 rated LED light bar is waterproof to three meters
and produces 4,320 lumens while drawing only 72 watts of power @0.6 amps from a 120 volt electrical system. This light can run on
any voltage from 120-277V AC volts and provides high output colored lighting that is ideal for use as commercial exterior lighting,
marine lighting, and in industrial and manufacturing applications.
The LEDLB-24CT-1227 LED light bar from Larson Electronics produces a 900' long by 100' wide light beam with 4,320 lumens of bright light
while drawing only 72 watts @0.6 amps from a 120V AC electrical system. Twenty-four three watt LEDs producing 180 lumens each are
arranged in rows and paired with high purity 10 degree optics to produce a tightly focused spot beam with limited spread or light spillage. We also
offer optional floodlight versions with 35 degree optics to produce a wider beam spread and more light over a larger area nearer the fixture. Flood
versions are ideal for wall pack and exterior building or landscape lightingl. This LED light fixture is offered in multiple color choices including
amber, red, green, and blue. Please choose color option below.
These LED light bars are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to
withstand the most demanding environments, conditions and applications. The entire Larson Electronics LEDLB series are constructed of
extruded aluminum and feature heavier housings, rubber isolated mounts and unbreakable polycarbonate lenses to provide increased durability
against vibrations, impacts, waves, hard rains, sand and high winds. This light is equipped with a trunnion mounting bracket that allows operators
to adjust the light fixture through 270 degrees of movement.
11/18/2014
Page: 164
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Edison EdixeonВ® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels
across a specific range. These LEDLB series light bars can operate on current ranging from 120 to 277V AC without any modifications necessary
as a result. This multi-voltage capability makes these units ideal for industrial and stand alone applications such as those found on commercial
sites, industrial applications, and residental uses.
LEDLB-24CT 35В° Flood Beam
(Opt)
LEDLB-24CT 10В° Spot Beam
(Stnd)
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of
environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are
waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum and the lenses
are unbreakable polycarbonate. The CREE EZBrightВ® LEDs offer inherent LED resistance to shocks and vibrations contributing to these units
15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates, very
cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme and
stored in another temperature extreme.
Adjustable Mounting: The trunnion wall mounting design on the LEDLB-24CT-1227 allows for post-installation angle positioning. This means
that by loosening 2 thumb bolts located on either side of the light, the operator can adjust the positioning angle of this light 270 degrees. Then
he/she would simply have to tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle. We also offer a BC-2 bar
clamp mounting system you can view here for even greater mounting versatility.
11/18/2014
Page: 165
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-24CT-1227 LED Light Bar
LEDLB LED Features
LEDs: 24 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 8.25 "-L 5.25 "-H 3.56"-D
LEDs Driven At 80%
Watts: 72
-40 C~ +80C Operating Temp Range
Voltage: 120-277 VAC
RoHS Compliant
Weight: 7.75 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
LED Chip Op Temp -40C to +125C
Mounting: Trunnion Bracket
IP68 Rated Waterproof to 3 meters
Wiring: 6" cable terminated in cord cap
Cord Cap: 5-15 Wall Plug, L5-15 twistlock, L6-15 twistlock, schuko
Amps: 0.6 (on 120 volts) 0.3 (on 240 volts)
Lumens: 4,320
LED Light Color: Red, blue, green, amber
LED Life Expectancy: 50,000 hours
Special Orders- Requirements
Optics Efficiency: 90%
Contact us for special requirements
Materials: Aluminum Housing, Polycarbonate Lens
Toll Free: 1-800-369-6671
Housing Colors: Black or White
Intl: 1-903-498-3363
Lux Readings 10' increments: 10' - 4,450, 20' - 1,175, 30' - 525, 40'
- 275, 50' - 182, 60' - 115, 70' - 82, 80' - 62, 90' - 42, 100' - 36, 110' E-mail: [email protected]
- 30
CE Certified
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 166
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
31 Watt Low Voltage LED Fixture for Hazardous Location Lighting - C1D2 Approved - 20' Cable
Part #: HAL-31L-LV-20DP
Price: $1,173.60
11/18/2014
Page: 167
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The HAL-31L-LV-20DP is a low voltage hazardous location lighting solution approved for Class 1 Division 2 environments and UL 1598
compliant for use in wet locations. This powerful LED light produces 2334 lumens, operates from 12 or 24 VDC, and is available in a
variety of configurations to allow tailoring to the specific requirements of various applications.
The HAL-31L-LV-20DP is designed to provide a high output and ruggedly durable lighting solution for applications where Class 1 Division 2
compliance is required. This low voltage explosion proof light can be operated with either 12 or 24 volt DC current and includes 20 feet of
connecting lead with standard two wire configuration and terminated in a 2-pin Deutsch connector. This light is constructed of precision machined
aluminum for excellent strength and durability, clear anodized for corrosion resistance, and is IP66 rated for ingress protection against dust and
direct exposure to high pressure water spray.
The HAL-31L-LV-20DP is also available in a 30 degree spotlight beam configuration for distance and a 100 degree configuration for wide area
illumination. The light output is offered in 6500K cool white, 4300K neutral white, and 3500K warm white color temperatures for maximum
illumination. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older,
bulkier, and less reliable metal halide and high pressure sodium lamps.
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 168
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Durability: The HAL-31L-LV-20DP hazardous location LED light is constructed of machined aluminum for high strength and durability with a
clear anodized finish for increased corrosion resistance. The housing is IP66 rated, providing protection against intrusion into the housing from
dusts, dirt, oils and water directly sprayed on the housing at high pressure. This LED light is equipped with an impact resistant acrlyic lens for
increased safety compared to glass lenses. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where
wetness or dusty conditions are commonly encountered.
High Output LEDs: The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme
long life. These Cree LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 100,000 hours, giving them better
efficiency and operational life than comparable LEDs. These lights are available in a 30 degree spotlight configuration for long beam length or
100 degree flood configuration for wide area coverage. The HAL-31L-LV-20DP has multiple color temperature options and is offered in 6500K
cool white with a color rendering of 75, 4300K neutral white with a color rendering of 75, and 3500K warm white with a color rendering of 80.
Mounting: Mounting for this unit is provided by an included aluminum yoke that allows vertical adjustment of the light once installed. The
mounting yoke is 1 inch wide and predrilled with two Вј inch holes spaced 2 inches apart for easy and secure mounting to flat surfaces. The
entire assembly weighs 4.5 lbs and measures only 6.9 inches in diameter and 3 inches deep, making it ideal for mounting in areas where space
is limited and a heavy fixture cannot be installed due to lack of support.
Wiring/Power: These hazardous location LED lights are equipped with 20 feet of cord containing a standard two wire (White+ Black-) connecting
configuration and terminated in a DT04-2P female Deutsch connector. These lights operate from 12 to 24 volt DC current and draw 31 watts 2.64
amps on 12 VDC and 33 Watts 1.4 amps on 24 VDC.
Versatility: The HAL-31L-LV-20DP is ETL listed for Class 1 Division 2 groups A,B,C and D locations, certified to CSA 22.2 No. 250.0, and
conforms to UL 1598. This unit carries an IP66 waterproof rating ensuring protection against ingress from dusts, dirt, oils and water sprayed at
high pressure directly on the fixture. This light is ideal for indoor or outdoor applications, food processing, and industrial operations with
hazardous location classification where dusty or wet conditions are commonly encountered.
11/18/2014
Page: 169
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
HAL-31L-LV-20DP Hazardous Location LED Light
ETL Listed
Lamp Type: LED
Class 1 Division 2 Groups A,B,C,D
Lamp Dimensions (w/o Bracket): 6.9" Diam"- 2.9"-Depth
CSA 22.2 No. 250.0
Lamp Dimensions (w/ Bracket): 4.63"-H 7.25" W"
UL 1598
Weight: 4.5lb | 2.05 k g
IP66 Ingress Protection
Watts: 31.6 W @ 12 VDC | 33.6 W @ 24 VDC
T3 Temperature Rating
Voltage: 12-28V DC
LM-80 > 60,500 hrs
Lumens: Spot: 2334 - Flood: 1996
Lamp Life Expectancy: 100,000 Hours
CRI: CW: 75, NW: 75, WW: 80
Amps: 2.64 A @12 VDC - 1.4 A @ 24 VDC
Light Color: CW: 6500K, NW: 4300K, WW: 3500K
Beam Type: 30В° Spot or 100В° Flood
Mounting: 1/4” - 20 Screws /Aluminum 1” Yoke
Materials: Machined aluminum housing - acrylic lens
Special Orders- Requirements
Housing Finish: Clear anodized finish
Contact us for special requirements
Temp Range: -40°C – +85°C
Toll Free: 1-800-369-6671
Typical Case Temperature: ~20В°C above ambient temperature
Intl: 1-903-498-3363
Wiring: 20Ft cable w/ Turck Connector & DT04-2P Deutsch Connector E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, we will ship a new
replacement.
Scroll Down to Purchase-
11/18/2014
Page: 170
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
11/18/2014
Page: 171
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- STEP
- DXF
11/18/2014
Page: 172
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
72 Watt LED Light Emitter - Adjustable Trunnion Bracket Mount - 120-277V AC - 4320 Lumens
Part #: LEDLB-24ET-1227
Price: $1,135.00
Buy American Compliant
The Larson Electronics LEDLB-24ET-1227 LED Light Bar offers high light output and extreme durability combined with a versatile
trunnion wall mounting system that provides 270 degrees of adjustability. This IP68 rated LED light bar is waterproof to three meters
and produces 4,320 lumens while drawing only 72 watts of power @0.6 amps from a 120 volt electrical system. This light can run on
any voltage from 120-277V AC volts and provides an extremely rugged lighting solution that is ideal for use as commercial exterior
lighting, marine lighting, and in industrial and manufacturing applications.
The LEDLB-24ET-1227 LED light bar from Larson Electronics produces a 900' long by 100' wide light beam with 4,320 lumens of bright light
while drawing only 72 watts @0.6 amps from a 120V AC electrical system. Twenty-four Seoul P3В® three watt LEDs producing 180 lumens each
are arranged in rows and paired with high purity 10 degree optics to produce a tightly focused spot beam with limited spread or light spillage. We
also offer optional floodlight versions with 35 degree optics to produce a wider beam spread and more light over a larger area nearer the fixture.
Flood versions are ideal for wall pack and exterior building or landscape lighting.
These LED light bars are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to
withstand the most demanding environments, conditions and applications. The entire Larson Electronics LEDLB series are constructed of
extruded aluminum and feature heavier housings, rubber isolated mounts and unbreakable polycarbonate lenses to provide increased durability
against vibrations, impacts, waves, hard rains, sand and high winds. This light is equipped with a trunnion mounting bracket that allows operators
to adjust the light fixture through 270 degrees of movement.
11/18/2014
Page: 173
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This photo shows an open field illuminated
This image shows the LEDLB-24ET unit
This photo shows a close up on the sign,
only by ambient light at approximately 9:00
pm'.
illuminating the field, a sign is placed approx.
800 feet away.
notice that the actual beam still reaches out
farther than the Larson Electronics sign.
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Edison EdixeonВ® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels
across a specific range. These LEDLB series light bars can operate on current ranging from 120 to 277V AC without any modifications necessary
as a result. This multi-voltage capability makes these units ideal for industrial and stand alone applications such as those found on commercial
sites, industrial applications, and residental uses.
LEDLB-24ET 35В° Flood Beam
(Opt)
LEDLB-24ET 10В° Spot Beam
(Stnd)
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of
environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are
waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum and the lenses
are unbreakable polycarbonate. The CREE EZBrightВ® LEDs offer inherent LED resistance to shocks and vibrations contributing to these units
15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates, very
cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme and
stored in another temperature extreme.
Adjustable Mounting: The trunnion wall mounting design on the LEDLB-24ET-1227 allows for post-installation angle positioning. This means
that by loosening 2 thumb bolts located on either side of the light, the operator can adjust the positioning angle of this light 270 degrees. Then
he/she would simply have to tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle. We also offer a BC-2 bar
clamp mounting system you can view here for even greater mounting versatility.
11/18/2014
Page: 174
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-24ET-1227 LED Light Bar
LEDLB LED Features
LEDs: 24 Seoul P3В® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 8.25 "-L 5.25 "-H 3.56"-D
LEDs Driven At 80%
Watts: 72
-40 C~ +80C Operating Temp Range
Voltage: 120-277 VAC
RoHS Compliant
Weight: 7.75 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
LED Chip Op Temp -40C to +125C
Mounting: Trunnion Bracket
IP68 Rated Waterproof to 3 meters
Wiring: 6" cable terminated in cord cap
Cord Cap: 5-15 Wall Plug, L5-15 twistlock, L6-15 twistlock, schuko
Amps: 0.6 (on 120 volts) 0.3 (on 240 volts)
Lumens: 4,320
LED Light Color: 6000K, 4500K or 3000K
LED Life Expectancy: 50,000 hours
Special Orders- Requirements
Optics Efficiency: 90%
Contact us for special requirements
Materials: Aluminum Housing, Polycarbonate Lens
Toll Free: 1-800-369-6671
Housing Colors: Black or White
Intl: 1-903-498-3363
Lux Readings 10' increments: 10' - 4,450, 20' - 1,175, 30' - 525, 40'
- 275, 50' - 182, 60' - 115, 70' - 82, 80' - 62, 90' - 42, 100' - 36, 110' E-mail: [email protected]
- 30
CE Certified
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 175
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
High Intensity LED Light - 150 Watts - 30 LEDs - 14,790 Lumens - 50 Foot Cord
Part #: LEDP5W-30-50C
Price: $1,096.62
11/18/2014
Page: 176
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The LEDP5W-30-50C LED Light offers high output from a compact form factor and is ideal for use in mining applications as well as
heavy equipment, hunting, boating, vehicle, military, law enforcement and industrial manufacturing uses. A 14,790 lumen output, 12.5
amp draw, 50,000 hour service life and 12 to 24 volt compatibility provides mine operators with a rugged and powerful LED alternative
to 400 watt metal halide lamps that uses little power and can withstand rugged use and abusive mining conditions.
The LEDP5W-30-50C LED light from Larson Electronics produces 14,790 lumens of high intensity light while drawing only 150 watts @12.5
amps from a 12 volt electrical system. Thirty CREE XLamp XPGВ® five watt LEDs producing 493 lumens each are arranged in rows and paired
with high purity optics to produce a well focused 25 degree spot beam that is ideal for providing far reaching concentrated illumination while still
covering a substantial amount of area. We also offer optional floodlight versions with a 60 degree beam spread to provide more light over a larger
area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. These LED light bars are waterproof to 3 meters,
sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding environments, conditions and
applications.
LEDP5W-30 lights are ideal replacements for fragile and hot running 400 watt metal halide lamps. They offer Pulse Width Modulation control, a
small profile, low power requirements, high durability and a versatile mounting system that makes these LED light emitters a superior lighting
solution for rough applications where power and reliability is critical. The heavy duty design and high power of these LED lights also makes them
suitable for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning, mining, security and law
enforcement, boating, vehicles and commercial structure illumination.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 177
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of
light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on
or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to automatically monitor and
adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDP5W series light bars
can operate on current ranging from 12 to 24VDC without any modifications necessary as a result. This ability to sense and adjust input current
also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise result in burning up
or premature LED failure without it.
Durability: As well as unparalleled heat control, the LEDP5W-30 series of LED lights from Larson Electronics also offer IP68 rated construction
that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40
degrees Celsius to 80 degrees Celsius, are waterproof to three meters, and resist ingress of dust, dirt and humidity. The housings are formed
from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XPGВ® LEDs help these units achieve 15.6Grms
rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend these LED lights for use in
applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.
Mounting: Each unit is equipped with an innovative trunnion style mounting bracket that allows the light to be attached to flat surfaces and
adjusted through 360 degrees of vertical movement. To adjust the unit after mounting, the user simply loosens the thumb screws located on
either side of the unit, moves it into the desired position, then retightens the screws. The base of the mounting trunnion is equipped with several
machined slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning.
Note: Most Larson Electronics LEDP5W-30, LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated
with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating
connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple
function LED lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
11/18/2014
Page: 178
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDP5W-30 High Output LED Light
Internal LED Driver Features
Lamp Type: CREE XLamp-XPGВ® LED
Automatic Current Sensing and Adjusting 9-32VDC
Dimensions: 11.69 "-L 7.54"-H 4.94"-D
Active Heat Management
Watts: 150
Ambient Op Temp -40C to +80C
Led Drive %: 90%
IP68 Tested to 3 Meters
Voltage: 12 or 24 VDC
Lighting Configuration: 25В° Spot or 60В° Flood
Mounting: Flat Surface 360 Degree Adjustable
Wiring: Deutsch DT04-2P connector - 50' Cord
Amps: 12.5 (on 12 volts)
Lumens: 14,790
Special Orders- Requirements
LED Light Color: White
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black
Weight: 11.02 Lbs
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 179
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
High Intensity Colored LED Light - 90 Watts - 30 LEDs - Red, Amber, Green, Blue
Part #: LEDP5W-30XC
Price: $1,076.62
11/18/2014
Page: 180
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The LEDP5W-30XC LED Light offers high output from a compact form factor and is ideal for use in mining applications as well as
heavy equipment, hunting, boating, vehicle, military, law enforcement and industrial manufacturing uses. A 8874 lumen output, 7.5
amp draw, 50,000 hour service life, multiple light output color choices, and 12 to 24 volt compatibility provides operators with a rugged
and powerful LED alternative to 400 watt metal halide lamps that uses little power and can withstand rugged use and abusive
conditions.
The LEDP5W-30XC LED light from Larson Electronics produces 8874 lumens of high intensity light while drawing only 90 watts @7.5 amps from
a 12 volt electrical system. Thirty CREE XLamp XPGВ® LEDs producing 301 lumens each are arranged in rows and paired with high purity optics
to produce a well focused 25 degree spot beam that is ideal for providing far reaching concentrated illumination while still covering a substantial
amount of area. We also offer optional floodlight versions with a 60 degree beam spread to provide more light over a larger area nearer the
fixture, making flood versions ideal for use as dedicated work and area lights. These LED light bars are waterproof to 3 meters, sealed against
intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding environments, conditions and applications.
LEDP5W-30XC lights are ideal replacements for fragile and hot running 400 watt metal halide lamps. They offer Pulse Width Modulation control,
a small profile, low power requirements, high durability and a versatile mounting system that makes these LED light emitters a superior lighting
solution for rough applications where power and reliability is critical. This LED fixture is offered in red, blue, green, amber, or white light output.
The heavy duty design and high power of these LED lights also makes them suitable for a wide array of applications including but not limited to:
military, industrial manufacturing, machine visioning, mining, security and law enforcement, boating, vehicles and commercial structure
illumination.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 181
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of
light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on
or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to automatically monitor and
adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDP5W-30XC series
light bars can operate on current ranging from 12 to 24VDC without any modifications necessary as a result. This ability to sense and adjust input
current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise result in
burning up or premature LED failure without it.
Durability: As well as unparalleled heat control, the LEDP5W-30XC series of LED lights from Larson Electronics also offer IP68 rated
construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature
changes of -40 degrees Celsius to 80 degrees Celsius, are waterproof to three meters, and resist ingress of dust, dirt and humidity. The housings
are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XPGВ® LEDs help these units achieve
15.6Grms rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend these LED lights
for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.
Mounting: Each unit is equipped with an innovative trunnion style mounting bracket that allows the light to be attached to flat surfaces and
adjusted through 360 degrees of vertical movement. To adjust the unit after mounting, the user simply loosens the thumb screws located on
either side of the unit, moves it into the desired position, then retightens the screws. The base of the mounting trunnion is equipped with several
machined slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning.
Note: Most Larson Electronics LEDP5W-30XC, LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated
with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating
connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple
function LED lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
11/18/2014
Page: 182
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDP5W-30XC High Output LED Light
Internal LED Driver Features
Lamp Type: CREE XLamp-XPGВ® LED
Automatic Current Sensing and Adjusting 9-32VDC
Dimensions: 11.69 "-L 7.54"-H 4.94"-D
Active Heat Management
Watts: 90
Ambient Op Temp -40C to +80C
Led Drive %: 90%
IP68 Tested to 3 Meters
Voltage: 12 or 24 VDC
Lighting Configuration: 25В° Spot or 60В° Flood
Mounting: Flat Surface 360 Degree Adjustable
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps: 7.5 (on 12 volts)
Lumens: 8874 (white)
LED Light Color: White, Red, Amber, Blue, Green
LED Life Expectancy: 50,000 hours
Special Orders- Requirements
Optics Efficiency: 90%
Contact us for special requirements
Materials: Aluminum Housing, Polycarbonate Lens
Toll Free: 1-800-369-6671
Housing Colors: Black
Intl: 1-903-498-3363
Weight: 11.02 Lbs
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 183
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
31 Watt Low Voltage LED Fixture for Industrial Lighting - Adjustable Trunnion U-Bracket Mount
Part #: GAU-31L-LV
Price: $1,044.00
Buy American Compliant
The GAU-31L-LV is a low voltage industrial lighting solution approved for outdoor environments and IP66 waterproof for use in wet
locations. This powerful LED light produces 2334 lumens, operates from 12 or 24 VDC, and is available in a variety of configurations to
allow tailoring to the specific requirements of various applications.
The GAU-31L-LV is designed to provide a high output and ruggedly durable lighting solution for applications where corrosion resistance and
waterproof light fixtures are required. This low voltage LED light can be operated with either 12 or 24 volt DC current and includes 6 feet of
connecting lead with standard two wire configuration. This light is constructed of precision machined aluminum for excellent strength and
durability, clear anodized for corrosion resistance, and is IP66 rated for ingress protection against dust and direct exposure to high pressure
water spray.
The GAU-31L-LV is also available in a 30 degree spotlight beam configuration for distance and a 100 degree configuration for wide area
illumination. The light output is offered in cool white, neutral white, and warm white color temperatures for maximum illumination. The high output,
cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable metal
halide and high pressure sodium lamps.
Click Photo to Enlarge
11/18/2014
Page: 184
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Durability: The GAU-31L-LV industrial grade LED light is constructed of machined aluminum for high strength and durability with a clear
anodized finish for increased corrosion resistance. The housing is IP66 rated, providing protection against intrusion into the housing from dusts,
dirt, oils and water directly sprayed on the housing at high pressure. This LED light is equipped with an impact resistant acrlyic lens for increased
safety compared to glass lenses. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness
or dusty conditions are commonly encountered.
High Output LEDs: The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme
long life. These Cree LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 100,000 hours, giving them better
efficiency and operational life than comparable LEDs. These lights are available in a 30 degree spotlight configuration for long beam length or
100 degree flood configuration for wide area coverage. The GAU-31L-LV has multiple color temperature options and is offered in 6500K cool
white with a color rendering of 75, 4300K neutral white with a color rendering of 75, and 3500K warm white with a color rendering of 80.
Mounting: Mounting for this unit is provided by an included aluminum yoke that allows vertical adjustment of the light once installed. The
mounting yoke is 1 inch wide and predrilled with two Вј inch holes spaced 2 inches apart for easy and secure mounting to flat surfaces. The
entire assembly weighs 4.5 lbs and measures only 6.9 inches in diameter and 3 inches deep, making it ideal for mounting in areas where space
is limited and a heavy fixture cannot be installed due to lack of support.
Wiring/Power: These industrial grade LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting
configuration. These lights operate from 12 to 24 volt DC current and draw 31 watts 2.64 amps on 12 VDC and 33 Watts 1.4 amps on 24 VDC.
Versatility: The GAU-31L-LV is ETL listed, certified to CSA 22.2 No. 250.0, and conforms to UL 1598. This unit carries an IP66 waterproof rating
ensuring protection against ingress from dusts, dirt, oils and water sprayed at high pressure directly on the fixture. This light is ideal for indoor or
outdoor applications and industrial operations where dusty or wet conditions are commonly encountered.
11/18/2014
Page: 185
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
GAU-31L-LV Industrial LED Light
ETL Listed
Lamp Type: LED
CSA 22.2 No. 250.0
Lamp Dimensions (w/o Bracket): 6.9" Diam"- 2.9"-Depth
IP66 Ingress Protection
Lamp Dimensions (w/ Bracket): 4.63"-H 7.25" W"
UL 1598
Weight: 4.5lb | 2.05 k g
T3 Temperature Rating
Watts: 31.6 W @ 12 VDC | 33.6 W @ 24 VDC
LM-80 > 60,500 hrs (based on Cree long term tests)
Voltage: 12-28V DC
Lumens: Spot: 2334 - Flood: 1996
Lamp Life Expectancy: 100,000 Hours
CRI: CW: 75, NW: 75, WW: 80
Amps: 2.64 A @12 VDC - 1.4 A @ 24 VDC
Light Color: CW: 6500K, NW: 4300K, WW: 3500K
Beam Type: 30В° Spot or 100В° Flood
Mounting: 1/4” - 20 Screws /Aluminum 1” Yoke
Materials: Machined aluminum housing - acrylic lens
Special Orders- Requirements
Housing Finish: Clear anodized finish
Contact us for special requirements
Temp Range: -40В°C to +85В°C
Toll Free: 1-800-369-6671
Typical Case Temperature: ~20В°C above ambient temperature
Intl: 1-903-498-3363
Wiring: 6Ft Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, we will ship a new
replacement.
Scroll Down to Purchase-
11/18/2014
Page: 186
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 187
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LED Blasting Light - Waterproof - Magnetic Mount - 100 foot cord - 4320 Lumens - High Voltage
Part #: BL24-LED-100
Price: $1,029.00
Buy American Compliant
The Larson Electronics BL24-LED-100 LED Blasting Light offers high light output and extreme durability combined with a versatile
magnetic trunnion mounting system that provides convenience and 270 degrees of adjustability. This IP68 rated LED blasting light is
waterproof to three meters and produces 4,320 lumens . This light runs on standard 120-277 VAC and comes equipped with a 200 lbs
grip magnetic mount and 100 feet of connecting cord.
The BL24-LED-100 LED blasting light from Larson Electronics produces 4,320 lumens of bright light and includes an inline transformer to allow
operation with standard 120-277 VAC. Twenty-four Edison EdixeonВ® Emitters containing CREE EZBrightВ® three watt LEDs producing 180
lumens each are arranged in rows and paired with high purity 35 degree optics to produce an evenly spread floodlight beam approximately 350
feet wide and 225 feet long. We also offer optional spotlight versions with 10 degree optics to produce a tighter beam with much longer throw and
higher intensity.
These LED blasting lights are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to
withstand the most demanding environments, conditions and applications. These units are constructed of extruded aluminum and feature heavier
housings, rubber isolated standard mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, and
the harsh conditons of blasting operations. This light is equipped with a 200lbs grip magnetic mount base and a 100 foot cord to provide ample
mounting versatility. This magnetic base allows fast and easy setup of this light and will hold the fixture in place under high vibration conditions.
This light comes with a pack of 5 adhesive back blasting light covers.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 188
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This high voltage light is equipped to run directly from 120 to 277 VAC, allowing it to be operated from any standard wall outlet. Also available is
are 9-32 VDC version which allow the lamp to be operated from standard 12-24 volt DC current produced by vehicles and heavy equipment. We
also offer this light with an amber light output to enhance the penetration in low visibility (due to steam or particulates) environments. We also
offer the unit with green light output or standard white. Please choose your color below when ordering.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Edison EdixeonВ® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels
across a specific range. This particular blasting light is fitted with our DCP-11-DP transformer with allows operators to simply plug the unit into
any standard wall outlet equipped with 120-277VAC.
BL24-LED 35В° Flood Beam
(Opt)
BL24-LED 10В° Spot Beam
(Stnd)
Durability: This series of LED blasting lights from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of
environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are
waterproof to three meters, and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum and the lenses
are unbreakable polycarbonate. The EdixeonВ® LEDs offer inherent LED resistance to shocks and vibrations contributing to these units 15.6Grms
rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates, very cold areas
and rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme and stored in
another temperature extreme.
Protective Mylar covers are available to protect the lens faceplate and catch overspray in coating applications. The adhesive backed Mylar lens
covers can be peeled off and replaced easily.
Adjustable Magnetic Mounting: The dual 100 lbs magnets and trunnion mounting design on the LEDLB-24ET-M allows for easy fixture
placement and post-placement angle positioning. This means that by loosening 2 thumb bolts located on either side of the light, the operator can
adjust the positioning angle of this light 270 degrees. Then he/she would simply have to tighten thumb bolts to lock the angle in place. No tools
are required for adjusting angle. This mounting system makes this unit ideal for vehicle and equipment lighting applications where the unit can
simply be attached or removed as needed. Please note, the magnetic base on this unit increases the units overall height from 5" to 6.3" total.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as
part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
11/18/2014
Page: 189
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
BL24-LED-100 LED Blasting Light
LEDLB LED Features
LEDs: 24 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 8.25"-L 5.25"-H 3.56"-D
LEDs Driven At 80%
Watts: 72
-40 C~ +80C Operating Temp Range
Voltage: 120-277 Volts AC (Optional: 9-42V DC)
RoHS Compliant
Weight: 8.6 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
LED Chip Op Temp -40C to +125C
Mounting: Magnetic Base
IP68 Rated Waterproof to 3 meters
Wiring: 100' SEOOW Cord Deutsch IPD / LADD DT04-2P connector
Amps: 6 (on 12 volts) 3 (on 24 volts)
Lumens: 4,320
Special Orders- Requirements
LED Light Color: 6000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Lux Readings 10' increments: 10' - 4,450, 20' - 1,175, 30' - 525, 40'
- 275, 50' - 182, 60' - 115, 70' - 82, 80' - 62, 90' - 42, 100' - 36, 110'
- 30
CE Certified
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 190
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 191
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
High Intensity LED Light - 150 Watts - 30 LEDs - 14,790 Lumens - Metal Halide Equivalent
Part #: LEDP5W-30
Price: $1,026.62
11/18/2014
Page: 192
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The LEDP5W-30 LED Light offers high output from a compact form factor and is ideal for use in mining applications as well as heavy
equipment, hunting, boating, vehicle, military, law enforcement and industrial manufacturing uses. A 14,790 lumen output, 12.5 amp
draw, 50,000 hour service life and 12 to 24 volt compatibility provides mine operators with a rugged and powerful LED alternative to
400 watt metal halide lamps that uses little power and can withstand rugged use and abusive mining conditions.
The LEDP5W-30 LED light from Larson Electronics produces 14,790 lumens of high intensity light while drawing only 150 watts @12.5 amps
from a 12 volt electrical system. Thirty CREE XLamp XPGВ® five watt LEDs producing 493 lumens each are arranged in rows and paired with
high purity optics to produce a well focused 25 degree spot beam that is ideal for providing far reaching concentrated illumination while still
covering a substantial amount of area. We also offer optional floodlight versions with a 60 degree beam spread to provide more light over a larger
area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. These LED light bars are waterproof to 3 meters,
sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding environments, conditions and
applications.
LEDP5W-30 lights are ideal replacements for fragile and hot running 400 watt metal halide lamps. They offer Pulse Width Modulation control, a
small profile, low power requirements, high durability and a versatile mounting system that makes these LED light emitters a superior lighting
solution for rough applications where power and reliability is critical. The heavy duty design and high power of these LED lights also makes them
suitable for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning, mining, security and law
enforcement, boating, vehicles and commercial structure illumination.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 193
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of
light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on
or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to automatically monitor and
adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDP5W-30 series light
bars can operate on current ranging from 12 to 24VDC without any modifications necessary as a result. This ability to sense and adjust input
current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise result in
burning up or premature LED failure without it.
Durability: As well as unparalleled heat control, the LEDP5W-30 series of LED lights from Larson Electronics also offer IP68 rated construction
that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40
degrees Celsius to 80 degrees Celsius, are waterproof to three meters, and resist ingress of dust, dirt and humidity. The housings are formed
from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XPGВ® LEDs help these units achieve 15.6Grms
rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend these LED lights for use in
applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.
Mounting: Each unit is equipped with an innovative trunnion style mounting bracket that allows the light to be attached to flat surfaces and
adjusted through 360 degrees of vertical movement. To adjust the unit after mounting, the user simply loosens the thumb screws located on
either side of the unit, moves it into the desired position, then retightens the screws. The base of the mounting trunnion is equipped with several
machined slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning.
Note: Most Larson Electronics LEDP5W-30, LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated
with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating
connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple
function LED lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
11/18/2014
Page: 194
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDP5W-30 High Output LED Light
Internal LED Driver Features
Lamp Type: CREE XLamp-XPGВ® LED
Automatic Current Sensing and Adjusting 9-32VDC
Dimensions: 11.69 "-L 7.54"-H 4.94"-D
Active Heat Management
Watts: 150
Ambient Op Temp -40C to +80C
Led Drive %: 90%
IP68 Tested to 3 Meters
Voltage: 12 or 24 VDC
Lighting Configuration: 25В° Spot or 60В° Flood
Mounting: Flat Surface 360 Degree Adjustable
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps: 12.5 (on 12 volts)
Lumens: 14,790
Special Orders- Requirements
LED Light Color: White
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black
Weight: 11.02 Lbs
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
Links (Click on the below items to view):
- SpecSheet Spanish
- Dimensional Drawing
- Manual
- STEP
11/18/2014
Page: 195
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
33 Watt Low Voltage LED Fixture for Hazardous Location Lighting - Low Profile Linear Fixture - C1D2
Part #: HAL-48-33W-LED
Price: $1,006.56
Buy American Compliant
The Larson Electronics HAL-48-33W-LED is a low voltage hazardous location lighting solution approved for Class 1 Division 2
environments and 1598 compliant for use in wet locations. This powerful 46.88" long LED strip light produces 2416 lumens, operates
from 12 or 24 VDC, and is suitable for a variety of applications.
The HAL-48-33W-LED is designed to provide a high output and ruggedly durable lighting solution for applications where Class1 Division 2
compliance is required. This low voltage explosion proof light can be operated with either 12 or 24 volt DC current and includes 6 feet of
connecting lead with standard two wire configuration. This light is constructed of powder coated extruded aluminum for excellent strength and
durability and is rated IP54 for protection against exposure to splashing water and limited dust ingress. These units are configured in a 46.88"
long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool running operation,
and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable HID and halogen light fixtures.
Durability/Mounting: The HAL-48-33W-LED hazardous location LED light is constructed of extruded aluminum with a tough powder coat finish
for high strength and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and basic protection against
splashing water such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or
dusty conditions are commonly encountered.
The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree
LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life
than comparable LEDs.
Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust
the light 170В° vertically for the best placement. The entire assembly weighs 2.8 lbs and measures 46.88 inches in length, and 2.68 inches wide
and 1.69 inches deep, making it ideal for mounting in areas where space is limited and a low profile fixture more readily installed.
Wiring/Power: These hazardous area LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting
configuration. These lights operate from 12 or 24 volt DC current at 33.6 watts 2.64 amps on 12 VDC and 1.32 amps on 24 VDC.
Versatility: The HAL-48-33W-LED is ETL approved for Class 1 Division 2 groups A, B, C and D locations. This unit carries an IP54 water
resistant rating ensuring protection against limited ingress from dusts, dirt, and basic protection against light water spray landing directly on the
fixture. This light is ideal for indoor or outdoor applications and industrial operations with hazardous location classification where dusty or wet
conditions are commonly encountered.
11/18/2014
Page: 196
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
HAL-48-33W-LED Hazardous Location LED Lighting
ETL Listed
Lamp Type: LED
Class 1 Division 2 Groups A,B,C,D
Dimensions: Lamp 46.88"-L 2.68" -W 1.69"- D
CSA 22.2 No. 250.0
Weight: 2.8lb | 1.2 k g
598
Watts: 33.6
IP54 Ingress Protection
Voltage: 12-24 VDC
T3 Temperature Rating
Lumens: 2416
Lamp Life Expectancy: 100,000 Hours
CRI: 75
Amps: 2.64 A @12 VDC | 1.32 A @ 24 VDC
Light Color: 6500K
Special Orders- Requirements
Beam Type: 100В° Flood
Contact us for special requirements
Mounting: Standard Triangle End Brackets
Toll Free: 1-800-369-6671
Temp Range: -40°C – +85°C
Intl: 1-903-498-3363
Wiring: 6Ft Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 197
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- STEP
- DXF
11/18/2014
Page: 198
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
33 Watt Low Profile LED Light for Hazardous Location Lighting - Low Voltage Linear Fixture - C1D2
Part #: GSLEDIP48-C1D2
Price: $1,006.56
Buy American Compliant
The Larson Electronics GSLEDIP48-C1D2 is a low voltage hazardous location lighting solution approved for Class 1 Division 2
environments and 1598 compliant for use in wet locations. This powerful 46.88" long LED strip light produces 2416 lumens, operates
from 12 or 24 VDC, and is suitable for a variety of applications.
The GSLEDIP48-C1D2 is designed to provide a high output and ruggedly durable lighting solution for applications where Class1 Division 2
compliance is required. This low voltage explosion proof light can be operated with either 12 or 24 volt DC current and includes 6 feet of
connecting lead with standard two wire configuration. This light is constructed of powder coated extruded aluminum for excellent strength and
durability and is rated IP54 for protection against exposure to splashing water and limited dust ingress. These units are configured in a 46.88"
long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool running operation,
and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable HID and halogen light fixtures.
Durability/Mounting: The GSLEDIP48-C1D2 hazardous location LED light is constructed of extruded aluminum with a tough powder coat finish
for high strength and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and basic protection against
splashing water such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or
dusty conditions are commonly encountered.
The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree
LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life
than comparable LEDs.
Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust
the light 170В° vertically for the best placement. The entire assembly weighs 2.8 lbs and measures 46.88 inches in length, and 2.68 inches wide
and 1.69 inches deep, making it ideal for mounting in areas where space is limited and a low profile fixture more readily installed.
Wiring/Power: These hazardous area LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting
configuration. These lights operate from 12 or 24 volt DC current at 33.6 watts 2.64 amps on 12 VDC and 1.32 amps on 24 VDC.
Versatility: The GSLEDIP48-C1D2 is ETL approved for Class 1 Division 2 groups A, B, C and D locations. This unit carries an IP54 water
resistant rating ensuring protection against limited ingress from dusts, dirt, and basic protection against light water spray landing directly on the
fixture. This light is ideal for indoor or outdoor applications and industrial operations with hazardous location classification where dusty or wet
conditions are commonly encountered.
11/18/2014
Page: 199
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
GSLEDIP48-C1D2 Hazardous Location LED Lighting
ETL Listed
Lamp Type: LED
Class 1 Division 2 Groups A,B,C,D
Dimensions: Lamp 46.88"-L 2.68" -W 1.69"- D
CSA 22.2 No. 250.0
Weight: 2.8lb | 1.2 k g
UL 598
Watts: 33.6
IP54 Ingress Protection
Voltage: 12-24 VDC
T3 Temperature Rating
Lumens: Spot: 2236 - Flood: 1756
Lamp Life Expectancy: 100,000 Hours
CRI: CW: 75, NW: 75, WW: 80
Amps: 2.64 A @12 VDC | 1.32 A @ 24 VDC
Light Color: CW: 6500K, NW: 4300K, WW: 3500K
Special Orders- Requirements
Beam Type: 30В° Spot or 100В° Flood
Contact us for special requirements
Mounting: Standard Triangle End Brackets
Toll Free: 1-800-369-6671
Temp Range: -40°C – +85°C
Intl: 1-903-498-3363
Wiring: 6Ft Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 200
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LED Light Emitter w/ Trunnion U-Bracket Mount - 40 LEDs - 120 Watts - 9-42VDC - 1250'L X 330'W
Part #: LEDLB-40ET
Price: $909.00
Buy American Compliant
The Larson Electronics LEDLB-40ET LED Boat Light offers high light output and extreme durability combined with a versatile trunnion
mounting system that provides 270 degrees of adjustability. This IP68 rated LED light bar is waterproof to three meters and produces
7,200 lumens while drawing only 120 watts of power @10 amps from a 12 volt electrical system. This light can run on any voltage from
9 to 42 volts and provides an extremely rugged lighting solution that is ideal for use in marine environments as a spreader light as well
as in industrial and manufacturing applications such as machine vision system lighting, heavy equipment illumination, blasting
lighting and mining operations.
The LEDLB-40ET LED light bar from Larson Electronics produces a 1250' long by 200' wide light beam with 7,200 lumens of bright light while
drawing only 120 watts @10 amps from a 12 volt electrical system. Forty Edison EdixeonВ® Emitters containing CREE EZBrightВ® three watt LEDs
producing 180 lumens each are paired with high purity 10 degree optics to produce a tightly focused spot beam with limited spread or light
spillage. We also offer optional floodlight versions with 35 degree optics to produce a wider beam spread and more light over a larger area nearer
the fixture, making flood versions ideal for use as work and area lights. These LED boat light bars are IP68 rated and waterproof to 3 meters,
sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and
applications.
The entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier housings, rubber isolated mounts and
unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains, sand and high winds.
Shown above, vehicle headlights only...
Headlights supported with LED light bar
Click Photo to Enlarge
11/18/2014
Click Photo to Enlarge
Page: 201
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Edison EdixeonВ® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels
across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as
a result. This multi-voltage capability makes these units ideal for mobile and standalone applications such as those found on commercial boats,
heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are
impractical.
LEDLB-40ET 35В° Flood Beam
(Opt)
LEDLB-40ET 10В° Spot Beam
(Stnd)
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of
environmental and operating conditions. The LED lights with the �E’ part number designation are designed for extreme durability and are larger
and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85
degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded
aluminum and the lenses are unbreakable polycarbonate. The EdixeonВ® LEDs offer inherent LED resistance to shocks and vibrations
contributing to these units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions,
high humidity climates, very cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in
one temperature extreme and stored in another temperature extreme.
Adjustable Mounting: The trunnion mounting design on the LEDLB-40ET allows for post-installation angle positioning. This means that by
loosening 2 thumb bolts located on either side of the light, the operator can adjust the positioning angle of this light 270 degrees. Then he/she
would simply have to tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle. We also offer a BC-2 bar clamp
mounting system you can view here for even greater mounting versatility. We also offer a BC-2 bar clamp mounting system you can view here for
even greater mounting versatility.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as
part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
11/18/2014
Page: 202
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-40ET LED Light Bar
LEDLB LED Features
LEDs: 40 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 22"-L 3"-H 3.56"-D
LEDs Driven At 80%
Watts: 120
-40 C~ +80C Operating Temp Range
Voltage: 9-42 VDC
Spot Beam: 1250'L x200'W
RoHS Compliant
Flood Beam: 420'L x 380'W
Weight: 11.4 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
Ambient Op Temp -40C to 85C
Mounting: Adjustable Trunnion
IP68 Waterproof to 3 meters
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps: 10 (on 12 volts) 5 (on 24 volts)
Lumens: 7,200
Special Orders- Requirements
LED Light Color: 6000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Lux: @Lens-199,600 @1 Meter-39,400
CE Certified
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
Links (Click on the below items to view):
- SpecSheet French
- SpecSheet Arabic
- Dimensional Drawing
- Manual
11/18/2014
Page: 203
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
150 Watt High Intensity LED Light - 19,500 Lumens - 120-277V AC - High Mast Lighting - Outdoor Rated
Part #: GAU-LTL-150W-LED
Price: $944.20
11/18/2014
Page: 204
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
The GAU-LTL-150W-LED High Mast LED Flood Light offers intense light output and is ideal for flood lighting, high mast lighting, light
towers, as well as industrial and outdoor lighting applications. Producing 19,500 lumens, a 1.25 amp draw at 120V, 80,000 hour service
life, 120-277 volt compatibility, and IP67 waterproof rating, this LED flood light provides operators with a rugged and powerful LED
alternative to 400 watt metal halide lamps that uses little power and can withstand rugged use and abusive conditions.
The GAU-LTL-150W-LED LED light from Larson Electronics produces 19,500 lumens of high intensity light while drawing only 150 watts at 1.25
amps from a 120 volt electrical system. Twenty BridgeluxВ® high output LEDs producing 963 lumens each are arranged in rows and paired with
PMMA high purity optics to produce a well focused 25В° wide spot beam that is ideal for providing far reaching concentrated illumination while still
covering a substantial amount of area. We also offer optional optics with 10В° spot, 40В° narrow flood, 60В° flood, and 90В° wide flood beam spreads.
The spot beams are tightly focused and are designed for high elevation mounting to achieve distance, making spot versions ideal for high mast
and spots lighting. The flood beams are designed to provide more light over a larger area nearer the fixture, making flood versions ideal for use
as dedicated work and area lights.
GAU-LTL-150W-LED lights are ideal replacements for fragile and hot running 400 watt metal halide lamps. They offer low power requirements,
high durability and a versatile mounting system that makes these LED light emitters a superior lighting solution for demanding applications where
power and reliability is critical. The heavy duty design and high power of these LED lights also makes them suitable for a wide array of
applications including but not limited to: high mast lighting, light towers, light plant LED retrofits, military, mining, industrial manufacturing,
machine visioning, security and law enforcement, commercial structure illumination, sport complexes, billboards, race tracks, and parking lots to
name a few.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per
bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs
for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The
end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours.
Durability: As well as unparalleled heat control, the GAU-LTL-150W-LED series of LED lights from Larson Electronics also offer IP67 rated
construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature
changes of -40В° Celsius to +80В° Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast
aluminum and the optics are high transmission PMMA with 98% light transmittance. The BridgeluxВ® LEDs help these units achieve resistance to
vibrations and are rated at 70% lumen maintenance after 80,0000 hours of use. We recommend these LED lights for use in applications where a
lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.
Mounting: Each unit is equipped with a back mount trunnion style mounting bracket that allows the light to be attached to flat surfaces and
adjusted through 160В° of vertical movement. To adjust the unit after mounting, the user simply loosens the set screws located on either side of
the unit, moves it into the desired position, then re-tightens the screws. The base of the mounting trunnion is equipped with several machined
slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning.
11/18/2014
Page: 205
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
GAU-LTL-150W-LED High Mast LED Light
Quick Summary
Lamp Type: BridgeluxВ® LED
400 Watt Metal Halide Replacement
Dimensions: 13.78"-L x 13.39"-W x 3.54"-D
Ambient Op Temp -40C to +80C
Weight: 36.38 Lbs
Ideal for Light Towers & LED Retrofits
Total Watts: 150
98% Transmission High Purity PMMA Optics
Total Lumens: 19,500
Multiple LED Banks for Heat Dispersion
Luminous Efficiency: 130 lm/w
130 Lumens Per Watt Efficiency
Beam Configurations: 10В° Spot, 25В° Wide Spot, 40В° Narrow Flood,
60В° Flood, or 90В° Wide Flood
70% Lumen Retention after 80,000 Hours
LED Color Temperature: Cool White - 5500-6500K
UL1012 Compliant
LED Life Expectancy: 80,000 hours
UL60950-1 Compliant
Optics Efficiency: 98% - PMMA High Transmittance Optics
CE Certified
Led Drive %: 90%
RoHS Compliant
Voltage:120-277 VAC
IP67 Rated Waterproof
Amp Draw: 1.25A @ 120V, 0.625A @ 240V, 0.54A @ 277V
Wiring: 10' Pigtail w/ Flying Leads
Mounting: Flat Surface Trunnion Mount U-Bracket
Materials: Die Cast Aluminum Housing, PMMA Optics
Special Orders- Requirements
Housing Color: Natural Aluminum
Contact us for special requirements
Ambient Temperature Range: -40В°C to +80В°C
Toll Free: 1-800-369-6671
Waterproof Rating: IP67
Intl: 1-903-498-3363
Warranty: Yes - 3 Years
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 206
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 207
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Hi-Res Image 1
- Hi-Res Image 2
- Hi-Res Image 3
- Hi-Res Image 4
- Hi-Res Image 5
11/18/2014
Page: 208
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
25 Watt Low Profile LED Fixture for Hazardous Location Lighting - 120-240V w/ Stepdown Transformer
Part #: HAL-36-25W-LED-1227
Price: $929.28
Buy American Compliant
The Larson Electronics HAL-36-25W-LED-1227 is a low profile hazardous location lighting solution approved for Class 1 Division 2
environments and UL 1598 compliant for use in wet locations. This powerful 36" long LED strip light produces 1812 lumens, operates
from 120 to 240 VAC, and is suitable for a variety of applications.
The HAL-36-25W-LED-1227 is designed to provide a high output and ruggedly durable lighting solution for applications where Class 1 Division 2
compliance is required. This explosion proof light can be powered from 120-240V AC power sources and includes 6 feet of SOOW cable
terminated in a standard 5-15 explosion proof plug. This light is constructed of powder coated extruded aluminum for excellent strength and
durability and is rated IP54 for protection against exposure to splashing water and limited dust ingress. These units are configured in a 36" long
strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool running operation, and
good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable HID and halogen light fixtures.
Durability/Mounting: The HAL-36-25W-LED-1227 hazardous area LED light is constructed of extruded aluminum with a tough powder coat
finish for high strength and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and basic protection against
splashing water such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or
dusty conditions are commonly encountered.
The LEDs in this linear light are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These
Cree LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and
operational life than comparable LEDs.
Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust
the light 170В° vertically for the best placement. The entire assembly weighs 2.1 lbs and measures 35.88 inches in length, 2.68 inches wide and
1.69 inches deep, making it ideal for mounting in areas where space is limited and a low profile fixture is more readily installed.
Wiring/Power: These hazardous location LED lights are equipped with 6 feet of cord containing an explosion proof 5-15 plug rated at 15 amps.
These lights operate from 120-240 volt AC current at 25 watts drawing 0.21 amps on 120 VAC and 0.11 amps on 240 VAC.
Versatility: The HAL-36-25W-LED-1227 is ETL approved for Class 1 Division 2 groups A,B,C and D locations. This unit carries an IP54 water
resistant rating ensuring protection against limited ingress from dusts, dirt, and basic protection against light water spray landing directly on the
fixture. This light is ideal for indoor or outdoor applications and industrial operations with hazardous location classification where dusty or wet
conditions are commonly encountered.
11/18/2014
Page: 209
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
HAL-36-25W-LED-1227 Hazardous Location LED Lighting
ETL Listed
Lamp Type: LED
Class 1 Division 2 Groups A,B,C,D
Dimensions: Lamp 35.88"-L 2.68" -W 1.69"- D
CSA 22.2 No. 250.0
Weight: 2.1lb | 0.9 k g
UL 1598
Watts: 25
IP54 Ingress Protection
Voltage: 120-240 VAC
T3 Temperature Rating
Lumens: 1812
Lamp Life Expectancy: 100,000 Hours
CRI: 75
Amps: 0.21A @ 120 VAC - 0.11A @ 240 VAC
Light Color: 6500K
Special Orders- Requirements
Beam Type: 100В° Flood
Contact us for special requirements
Mounting: Standard Triangle End Brackets
Toll Free: 1-800-369-6671
Temp Range: -40°C – +85°C
Intl: 1-903-498-3363
Wiring: 6Ft SOOW cable - EPP-15A EXP Plug
E-mail: [email protected]ronics.com
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
Links (Click on the below items to view):
- STEP
- DXF
11/18/2014
Page: 210
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LED Light Emitter - 24 LEDs - 72 Watts - Extreme Environment - Adjustable Wall Mount - 9-42VDC
Part #: LEDLB-24ET
Price: $815.00
Buy American Compliant
The Larson Electronics LEDLB-24ET LED Light Bar offers high light output and extreme durability combined with a versatile trunnion
wall mounting system that provides 270 degrees of adjustability. This IP68 rated LED light bar is waterproof to three meters and
produces 4,320 lumens while drawing only 72 watts of power @6 amps from a 12 volt electrical system. This light can run on any
voltage from 9 to 42 volts and provides an extremely rugged lighting solution that is ideal for use as commercial exterior lighting,
marine lighting, and in industrial and manufacturing applications.
The LEDLB-24ET LED light bar from Larson Electronics produces a 900' long by 100' wide light beam with 4,320 lumens of bright light while
drawing only 72 watts @6 amps from a 12 volt electrical system. Twenty-four Edison EdixeonВ® Emitters containing CREE EZBrightВ® three watt
LEDs producing 180 lumens each are arranged in rows and paired with high purity 10 degree optics to produce a tightly focused spot beam with
limited spread or light spillage. We also offer optional floodlight versions with 35 degree optics to produce a wider beam spread and more light
over a larger area nearer the fixture. Flood versions equipped with our DCP-11 Waterproof Transfomer are ideal for wall pack and exterior
building or landscape lighting.
These LED light bars are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to
withstand the most demanding environments, conditions and applications. The entire Larson Electronics LEDLB series are constructed of
extruded aluminum and feature heavier housings, rubber isolated mounts and unbreakable polycarbonate lenses to provide increased durability
against vibrations, impacts, waves, hard rains, sand and high winds. This light is equipped with a trunnion mounting bracket that allows operators
to adjust the light fixture through 270 degrees of movement.
11/18/2014
Page: 211
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This photo shows an open field illuminated
This image shows the LEDLB-24ET unit
This photo shows a close up on the sign,
only by ambient light at approximately 9:00
pm'.
illuminating the field, a sign is placed approx.
800 feet away.
notice that the actual beam still reaches out
farther than the Larson Electronics sign.
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 212
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Edison EdixeonВ® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels
across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as
a result. This multi-voltage capability makes these units ideal for mobile and stand alone applications such as those found on commercial boats,
heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are
impractical.
LEDLB-24ET 35В° Flood Beam
(Opt)
LEDLB-24ET 10В° Spot Beam
(Stnd)
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of
environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are
waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum and the lenses
are unbreakable polycarbonate. The CREE EZBrightВ® LEDs offer inherent LED resistance to shocks and vibrations contributing to these units
15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates, very
cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme and
stored in another temperature extreme.
Adjustable Mounting: The trunnion wall mounting design on the LEDLB-24ET allows for post-installation angle positioning. This means that by
loosening 2 thumb bolts located on either side of the light, the operator can adjust the positioning angle of this light 270 degrees. Then he/she
would simply have to tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle. We also offer a BC-2 bar clamp
mounting system you can view here for even greater mounting versatility.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as
part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
11/18/2014
Page: 213
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-24ET LED Light Bar
LEDLB LED Features
LEDs: 24 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 8.25 "-L 5.25 "-H 3.56"-D
LEDs Driven At 80%
Watts: 72
-40 C~ +80C Operating Temp Range
Voltage: 9-46 VDC
RoHS Compliant
Weight: 7.75 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
LED Chip Op Temp -40C to +125C
Mounting: Trunnion Bracket
IP68 Rated Waterproof to 3 meters
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps: 6 (on 12 volts) 3 (on 24 volts)
Lumens: 4,320
Special Orders- Requirements
LED Light Color: 6000K, 4500K or 3000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Lux Readings 10' increments: 10' - 4,450, 20' - 1,175, 30' - 525, 40'
- 275, 50' - 182, 60' - 115, 70' - 82, 80' - 62, 90' - 42, 100' - 36, 110'
- 30
CE Certified
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 214
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- SpecSheet French
- SpecSheet Arabic
- SpecSheet Spanish
- Manual
- SpectrumChart
11/18/2014
Page: 215
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LED Blasting Light - Waterproof - Magnetic Mount - 4320 Lumens - High Voltage
Part #: BL24-LED
Price: $929.00
Buy American Compliant
The Larson Electronics BL24-LED LED Blasting Light offers high light output and extreme durability combined
with a versatile magnetic trunnion mounting system that provides convenience and 270 degrees of adjustability.
This IP68 rated LED blasting light is waterproof to three meters and produces 4,320 lumens while drawing only 72
watts of power @6 amps from a 12 volt electrical system. This light can run on any voltage from 9 to 42 volts and
comes equipped with a 200 lbs grip magnetic mount and 50 feet of connecting cord.
The BL24-LED LED blasting light from Larson Electronics produces 4,320 lumens of bright light while drawing only 72 watts
@6 amps from a 12 volt electrical system. Twenty-four Edison EdixeonВ® Emitters containing CREE EZBrightВ® three watt
LEDs producing 180 lumens each are arranged in rows and paired with high purity 35 degree optics to produce an evenly
spread floodlight beam approximately 350 feet wide and 225 feet long. We also offer optional spotlight versions with 10
degree optics to produce a tighter beam with much longer throw and higher intensity.
These LED blasting lights are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt and very
ruggedly constructed to withstand the most demanding environments, conditions and applications. These units are
constructed of extruded aluminum and feature heavier housings, rubber isolated standard mounts and unbreakable
polycarbonate lenses to provide increased durability against vibrations, impacts, and the harsh conditons of blasting
operations. This light is equipped with a 200lbs grip magnetic mount base and a 50 foot cord to provide ample mounting
versatility. This magnetic base allows fast and easy setup of this light and will hold the fixture in place at speeds up to
85mph or under high vibration conditions.
This light comes with a pack of 5 adhesive back blasting light covers.
11/18/2014
Page: 216
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Shown above, vehicle headlights only...
Headlights supported with LED light bar.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 217
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Photos to Enlarge
Click Photos to Enlarge
11/18/2014
Click Photos to Enlarge
Page: 218
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This low voltage light is equipped to run directly from 9-42 volts, allowing it to be operated from any vehicle or equipment's
electrical system. Also available is a DCP-11-DP inline transformer which allows these units to be operated with standard
120V-277V AC current commonly found in wall outlets. We also offer this light with an amber light output to enhance the
penetration in low visibility (due to steam or particulates) environments. We also offer the unit with green light output or
standard white. Please choose your color below when ordering.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many
manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an
extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to
produce the maximum amount of power and longevity from the integrated Edison EdixeonВ® Emitters. The end result is
more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels
regardless of input levels across a specific range. These LEDLB series light bars can operate on current ranging from 9 to
42VDC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and
stand alone applications such as those found on commercial boats, heavy equipment and vehicles where power systems
don’t always operate with 12 volts and external generators, transformers or inverters are impractical. This particular blasting
light is available with our DCP-11-DP transformer with allows operators to simply plug the unit into any standard wall outlet
equipped with 120-277VAC.
BL24-LED 35В° Flood Beam
BL24-LED 10В° Spot Beam
(Stnd)
(Opt)
Durability: This series of LED blasting lights from Larson Electronics offer IP68 rated construction that is designed to
withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of 40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters, and resist ingress of dust, dirt and humidity. The
housings are formed from thick extruded aluminum and the lenses are unbreakable polycarbonate. The EdixeonВ® LEDs
offer inherent LED resistance to shocks and vibrations contributing to these units 15.6Grms rating of vibration tolerance.
We recommend these LED lights for high stress - high vibratory conditions, high humidity climates, very cold areas and
rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme
and stored in another temperature extreme.
Protective Mylar covers are available to protect the lens faceplate and catch overspray in coating applications. The
adhesive backed Mylar lens covers can be peeled off and replaced easily.
11/18/2014
Page: 219
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Adjustable Magnetic Mounting: The dual 100 lbs magnets and trunnion mounting design on the LEDLB-24ET-M allows
for easy fixture placement and post-placement angle positioning. This means that by loosening 2 thumb bolts located on
either side of the light, the operator can adjust the positioning angle of this light 270 degrees. Then he/she would simply
have to tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle. This mounting system
makes this unit ideal for vehicle and equipment lighting applications where the unit can simply be attached or removed as
needed. Please note, the magnetic base on this unit increases the units overall height from 5" to 6.3" total.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are
terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and
LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED
lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible
combos) will have different Deutsch connectors.
11/18/2014
Page: 220
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
BL24-LED LED Blasting Light
LEDLB LED Features
LEDs: 24 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 8.25"-L 5.25"-H 3.56"-D
LEDs Driven At 80%
Watts: 72
-40 C~ +80C Operating Temp Range
Voltage:
RoHS Compliant
9-42 VDC
Weight:8.6 Lbs
70% Lumen Retention @65,000 hours
LED Chip Op Temp -40C to +125C
Lighting Configuration: 10В° Spot or 35В° Flood
Mounting: Magnetic Base
IP68 Rated Waterproof to 3 meters
Wiring: 50' SEOOW Cord Deutsch IPD / LADD DT04-2P connector
Amps: 6 (on 12 volts) 3 (on 24 volts)
Lumens: 4,320
Special Orders- Requirements
LED Light Color: 6000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail:
[email protected]
Housing Colors: Black or White
Lux Readings 10' increments: 10' - 4,450, 20' - 1,175, 30' - 525, 40' 275, 50' - 182, 60' - 115, 70' - 82, 80' - 62, 90' - 42, 100' - 36, 110' - 30
CE Certified
3 year warranty replacement on this LED light. After 30 days, the customer
ships the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement.
Scroll Down to Purchase-
11/18/2014
Page: 221
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 222
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
11/18/2014
Page: 223
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
33 Watt General Area Use LED Light Fixture - 48" Light
Part #: GAU-48-33W-LED
Price: $924.48
Buy American Compliant
The Larson Electronics GAU-48-33W-LED is a low voltage solution approved for use in wet locations. This powerful 46.88" long LED
strip light produces 2416 lumens, operates from 12 or 24 VDC, and is suitable for a variety of applications.
The GAU-48-33W-LED is designed to provide a high output and ruggedly durable lighting solution. This low voltage light can be operated with
either 12 or 24 volt DC current and includes 6 feet of connecting lead with standard two wire configuration. This light is constructed of powder
coated extruded aluminum for excellent strength and durability and is rated IP54 for protection against exposure to splashing water and limited
dust ingress. These units are configured in a 46.88" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is
preferred. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older,
bulkier, and less reliable HID and halogen light fixtures.
Durability/Mounting: The GAU-48-33W-LED LED light is constructed of extruded aluminum with a tough powder coat finish for high strength
and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and basic protection against splashing water such as
rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty conditions are
commonly encountered.
The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree
LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life
than comparable LEDs.
Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust
the light 170В° vertically for the best placement. The entire assembly weighs 2.8 lbs and measures 46.88 inches in length and 2.68 inches wide
and 1.69" deep, making it ideal for mounting in areas where space is limited and a low profile fixture more readily installed.
Wiring/Power: These LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting configuration.
These lights operate from 12 or 24 volt DC current at 33.6 watts 2.64 amps on 12 VDC and 1.32 amps on 24 VDC.
Versatility: This unit carries an IP54 water resistant rating ensuring protection against limited ingress from dusts, dirt, and basic protection
against light water spray landing directly on the fixture. This light is ideal for indoor or outdoor applications and industrial operations where dusty
or wet conditions are commonly encountered.
11/18/2014
Page: 224
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
GAU-48-33W-LED LED Light Bar
GAU-48-33W-LED Ratings
Lamp Type: LED
IP54 Ingress Protection
Dimensions: Lamp 46.88"-L 2.68" -W 1.69"- D
T3 Temperature Rating
Weight: 2.8lb | 1.2 k g
Watts: 33.6 W
Voltage: 12-24 VDC
Lumens: 2416
Lamp Life Expectancy: 100,000 Hours
CRI: 75
Amps: 2.64 A @12 VDC | 1.32 A @ 24 VDC
Light Color: 6500K
Special Orders- Requirements
Beam Type: 100В° Flood
Contact us for special requirements
Mounting: Standard Triangle End Brackets
Toll Free: 1-800-369-6671
Temp Range: -40°C – +85°C
Intl: 1-903-498-3363
Wiring: 6Ft Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 225
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- STEP
- DXF
11/18/2014
Page: 226
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
200lb. Grip Magnetic Mount LED Light Emitter w/ Trunnion Mount - 24LEDs - 900'L X 100'W Spot Beam
Part #: LEDLB-24-ET-M
Price: $867.00
Buy American Compliant
The Larson Electronics LEDLB-24-ET-M LED Light Bar offers high light output and extreme durability combined with a versatile
magnetic trunnion mounting system that provides convenience and 270 degrees of adjustability. This IP68 rated LED light bar is
waterproof to three meters and produces 4,320 lumens while drawing only 72 watts of power @6 amps from a 12 volt electrical system.
This light can run on any voltage from 9 to 42 volts and comes equipped with a 16ft coil cord ending in a cigarette plug connector.
The LEDLB-24-ET-M LED light bar from Larson Electronics produces a 900' long by 100' wide light beam with 4,320 lumens of bright light while
drawing only 72 watts @6 amps from a 12 volt electrical system. Twenty-four Edison EdixeonВ® Emitters containing CREE EZBrightВ® three watt
LEDs producing 180 lumens each are arranged in rows and paired with high purity 10 degree optics to produce a tightly focused spot beam with
limited spread or light spillage. We also offer optional floodlight versions with 35 degree optics to produce a wider beam spread and more light
over a larger area nearer the fixture, making flood versions ideal for use as work and area lights.
These LED light bars are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to
withstand the most demanding environments, conditions and applications. The entire Larson Electronics LEDLB-E series are constructed of
extruded aluminum and feature heavier housings, rubber isolated standard mounts and unbreakable polycarbonate lenses to provide increased
durability against vibrations, impacts, waves, hard rains, sand and high winds. This light is equipped with a 200lbs grip magnetic mount base and
16 foot coil cord ending in a cigarette plug connector. This magnetic base allows fast and easy setup of this light and will hold the fixture in place
at speeds up to 85mph provided the mount is properly affixed and secure.
Shown above, vehicle headlights only...
Hheadlights supported with LED light bar.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 227
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Edison EdixeonВ® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels
across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as
a result. This multi-voltage capability makes these units ideal for mobile and stand alone applications such as those found on commercial boats,
heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are
impractical.
LEDLB-24-ET-M 35В° Flood Beam
(Opt)
LEDLB-24-ET-M 10В° Spot Beam
(Stnd)
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of
environmental and operating conditions. The LED lights with the �E’ part number designation are designed for extreme durability and are larger
and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85
degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded
aluminum and the lenses are unbreakable polycarbonate. The EdixeonВ® LEDs offer inherent LED resistance to shocks and vibrations
contributing to these units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions,
high humidity climates, very cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in
one temperature extreme and stored in another temperature extreme.
Adjustable Magnetic Mounting: The dual 100 lbs magnets and trunnion mounting design on the LEDLB-24ET-M allows for easy fixture
placement and post-placement angle positioning. This means that by loosening 2 thumb bolts located on either side of the light, the operator can
adjust the positioning angle of this light 270 degrees. Then he/she would simply have to tighten thumb bolts to lock the angle in place. No tools
are required for adjusting angle. This mounting system makes this unit ideal for vehicle and equipment lighting applications where the unit can
simply be attached or removed as needed. Please note, the magnetic base on this unit increases the units overall height from 5" to 6.3" total.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as
part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
11/18/2014
Page: 228
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-24-ET-M LED Light Bar
LEDLB LED Features
LEDs: 24 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 8.25"-L 5.25"-H 3.56"-D
LEDs Driven At 80%
Watts: 72
-40 C~ +80C Operating Temp Range
Voltage: 9-42 VDC
Spot Beam: 900'L x 100'W
RoHS Compliant
Flood Beam: 300'L x 280'W
Weight: 8.6 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
LED Chip Op Temp -40C to +125C
Mounting: Magnetic Base
IP68 Rated Waterproof to 3 meters
Wiring: 16ft Coil Cord w/Cigarette Plug
Amps: 6 (on 12 volts) 3 (on 24 volts)
Lumens: 4,320
Special Orders- Requirements
LED Light Color: 6000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Lux Readings 10' increments: 10' - 4,450, 20' - 1,175, 30' - 525, 40'
- 275, 50' - 182, 60' - 115, 70' - 82, 80' - 62, 90' - 42, 100' - 36, 110'
- 30
CE Certified
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 229
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- SpecSheet French
- SpecSheet Arabic
- Dimensional Drawing
- Manual
11/18/2014
Page: 230
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
UL Listed LED Blasting Light - 6, 10-Watt LEDs - 120VAC - IP68 Rated - Magnetic Mount
Part #: BL6X10-LED
Price: $859.00
Buy American Compliant
The Larson Electronics BL6X10-LED blasting light is ideal for use in sand and media blasting applications where a powerful light
capable withstanding the harsh conditions of the blasting are is needed. Producing 5,400 lumens of light output, this light has a 50,000
hour rated service life and the capability of operating with common 120-277 volt AC using the included inline transformer or 9-46 VDC
without it.
The BL6X10-LED blasting light from Larson Electronics produces 5,400 lumens of bright light while drawing only 60 watts @6 amps from a 12
volt electrical system. Six Seoul Z-Power 10 watt LEDs producing 900 lumens each are paired with high purity 35 degree optics to produce a
flood beam 270 foot long by 240 feet wide. We also offer a 10 degree spread spot beam configuration to produce a much tighter beam for special
applications. These LED light blasting lights are waterproof to 3 meters, sealed against intrusion by dust and dirt, and very ruggedly constructed
to withstand the most demanding environments, conditions and applications. These units incorporate a yolk type trunnion mount fitted with a
single mounting stud and a 200lbs grip magnetic base that alllows full adjustability and simple mounting.
This LED blasting light normally runs on any voltage ranging from 9 Volts to 46 Volts DC, but with the inlcuded DCP-11-DP inline transformer and
50 feet of SOOW cord, can also run from common 120V/277V AC. Operators can run these lights directly from a battery, generator vehicle, or by
using the included DCP-11-DP transformer, plug this unit into any available wall outlet, 220V, or 277VAC power source.
Optional LED colors include Amber and Green for more effective light penetration in the dusty environment of a media blasting room. A small
profile, versatile power options, high durability and versatile mounting magnetic system makes these LED light emitters a superior lighting
solution for a wide array of applications including but not limited to: sand/media blasting, military, industrial manufacturing, machine visioning,
security and law enforcement, boating, vehicles and commercial structure illumination.
11/18/2014
Page: 231
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED boat lights utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Seoul Z-Power LEDs. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels
ranging from 9 to 50 VDC. These LEDLB series light bars can operate on current ranging from 9 to 50 VDC without any modifications necessary
as a result. This multi-voltage capability makes these units ideal for mobile and stand alone applications such as those found on boats, heavy
equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are
impractical.
BL6X10-LED 35В° Flood Beam
(Opt)
BL6X10-LED 10В° Spot Beam
(Stnd)
Durability: The BL6X10-LED LED blasting light from Larson Electronics offers IP68 rated construction that is designed to withstand tough
environmental and operating conditions. These units can operate in temperatures ranging from -40 degrees Celsius to 85 degrees Celsius, are
waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum, the hardware is
stainless steel and the lenses are unbreakable polycarbonate. The Seoul Z-Power LEDs offer inherent LED resistance to shocks and vibrations,
contributing to these units 15.6Grms rating of vibration tolerance. These LED10W series light bars are ideal for use in professional applications
such as law enforcement and the military as well as industrial and commercial settings.
Mounting: This LED blasting light has a single 200 lbs grip magnetic base that can hold the unit in place even under high vibratory conditions.
An integrated trunnion bracket allows operators to adjust the light through a full range of vertical movement, providing the ability to aim the light
regardless of where it is mounted for best light coverage.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as
part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
Protective Mylar covers are available to protect the lens faceplate and catch overspray in coating applications. The adhesive backed Mylar lens
covers can be peeled off and replaced easily. Order protective covers below in the related products category.
11/18/2014
Page: 232
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
BL6X10-LED
LED10W-6R-M LED Features
LEDs: 6 Seoul Z-Power 10 Watt LED Emitters
Seoul Z-Power LED Emitters
Dimensions: 6"-Diam 1.5"-Depth
LEDs Driven At 80%
Watts: 60
-40 C~ +80C Operating Temp Range
Voltage: 120-270 VAC With Transformer, 9-48 VDC Without
70% Lumen Retention @65,000 hours
Weight: 4 Lbs
IP68 Rated Waterproof to 3 meters
Lighting Configuration: 10В° Spot or 35В° Flood
200lbs grip magnetic base
Mounting: Adjustable Trunnion Magnetic Base
Wiring: 50' SOOW Cord
Amps: 6 (on 12 volts) 3 (on 24 volts)
Lumens: 5400
Special Orders- Requirements
LED Light Color: 6300K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
CE Certified
EN55015 EMI
EN61547 EMS
EN62471 Photobiological Safety
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 233
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 234
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
90 Watt High Intensity LED Light - 9 LEDs - 8,281 Lumens - Degreed Aiming - Soft Start LEDs
Part #: LED10WSA-90
Price: $844.38
11/18/2014
Page: 235
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The LED10WSA-90 LED Light offers high output from a compact form factor and is ideal for use in mining applications as well as
heavy equipment, hunting, boating, vehicle, military, law enforcement and industrial manufacturing uses. A 8,281 lumen output, 50,000
hour service life and 12-24 volt compatibility provides operators with a rugged and powerful LED alternative to 250 watt metal halide
lamps that uses little power and can withstand rugged use and abusive mining conditions.
The LED10WSA-90 high output LED light from Larson Electronics produces 8,281 lumens of high intensity light while drawing only 90 watts
@7.48 amps from a 12 volt electrical system. Nine CREE XM-L2В® ten watt LEDs producing 920 lumens each are arranged in rows and paired
with high purity optics to produce a well focused 10В° spot beam that is ideal for providing far reaching concentrated illumination while still
covering a substantial amount of area. We also offer optional floodlight versions with a 40В° or 60В° beam spread to provide more light over a larger
area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. These LED light bars are waterproof to 3 meters,
sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding environments, conditions and
applications.
LED10WSA-90 lights are ideal replacements for fragile and hot running 400 watt metal halide lamps. They offer soft start technology, a small
profile, low power requirements, high durability and a shock dampening mounting system that makes these LED light emitters a superior lighting
solution for rough applications where power and reliability is critical. The heavy duty design and high power of these LED lights also makes them
suitable for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning, mining, security and law
enforcement, boating, vehicles and commercial structure illumination.
Protection: These high output LED light bars feature soft start technology, allowing the LEDs to gradually increase to maximum intensity
instead. Low in rush current at start-up reduces wear on associated components, increasing overall life of the internal electronics and improves
downtime. Built in redundancy lessens chance of full fixture failure, while the reverse polarity operation protects the fixture from shorting the
internal components.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of
light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on
or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
Voltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels
regardless of input levels across a specific range. These LED10WSA series light bars can operate on current ranging from 11 to 65 VDC without
any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops
that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it.
Durability: As well as unparalleled heat control, the LED10WSA series of LED lights from Larson Electronics also offer IP69K rated construction
that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40В°C
to +80В°C, are waterproof to three meters, can withstand high pressure and high temperature wash downs, and resist ingress of dust, dirt and
humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XM-L2В® LEDs help these
units achieve up to 60Grms rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend
these LED lights for use in applications that require regular intensive cleaning and are exposed to a lot of vibration, dust, dirt, and abusive
working conditions are encountered.
Mounting: Each unit is equipped with an innovative trunnion style mounting bracket that allows the light to be attached to flat surfaces and
adjusted through 360 degrees of vertical movement. The LED light head is secured to the mounting bracket with shock dampening rotating
inserts. The insert provides precision aiming down to 1В° while providing increased longevity to the LED fixture. To vertically adjust the unit after
mounting, the user simply loosens the screws located on either side of the unit, moves it into the desired position, then retightens the screws.
The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and slide the unit
for precise mount positioning. The stainless steel trunnion bracket has preset angles marked in 5В° intervals, allowing operators to precisely aim
each fixture.
Note: The LED10WSA series feature gold plated DT connectors to provide better conductivity. Most Larson Electronics LEDP5W-30, LEDLB,
LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The
mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending
on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating,
IR/Visible combos) will have different Deutsch connectors.
Applications for the LEDP10WSA include but are not limited to mining, dump trucks, construction machinery, cement mixers, and car washes.
11/18/2014
Page: 236
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LED10WSA-90 High Output LED Light
LED10WSA-90 Series Features
Lamp Type: CREE XL-L2В® LED
Automatic Current Sensing and Adjusting
Dimensions: 6.59"-L 6.81"-H 4.92"-D
Active Heat Management
Watts: 90
Ambient Op Temp -40В°C to +80В°C
Led Drive %: 90%
IP69K High Temp High Pressure Wash Down
Voltage: Universal Voltage 11-65V DC
EMC/EMI CISPR 25 Class 3 Rated
Beam Spread: 10В° Spot, 40В° Flood, 60В° Flood, 30В°/60В° Elliptical
304 Stainless Steel Mounting Hardware
Mounting: Flat Surface 304 SS Bracket - 360 Degree Adjustable
Shock Dampening Mounting System
Wiring: Gold Plated Deutsch IPD / LADD DT04-2P connector
Amps: 7.48 (on 12 volts) - 3.74 (on 24 volts)
Lumens: 8,281
Special Orders- Requirements
LED Light Color: White
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black
Weight: 9.7 Lbs
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 237
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
150 Watt High Intensity LED Light - 19,500 Lumens - 12-24V DC - High Mast Lighting - Outdoor Rated
Part #: GAU-LTL-150W-LED-LV
Price: $844.20
11/18/2014
Page: 238
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
The GAU-LTL-150W-LED-LV Low Voltage High Mast LED Flood Light offers intense light output and is ideal for flood lighting, high
mast lighting, light towers, as well as industrial and outdoor lighting applications. Producing 19,500 lumens, a 12.5 amp draw at 12V,
80,000 hour service life, 12-24 volt compatibility, and IP67 waterproof rating, this LED flood light provides operators with a rugged and
powerful LED alternative to 400 watt metal halide lamps that uses little power and can withstand rugged use and abusive conditions.
The GAU-LTL-150W-LED-LV LED light from Larson Electronics produces 19,500 lumens of high intensity light while drawing only 150 watts at
12.5 amps from a 12 volt DC electrical system. Twenty BridgeluxВ® high output LEDs producing 963 lumens each are arranged in rows and
paired with PMMA high purity optics to produce a well focused 25В° wide spot beam that is ideal for providing far reaching concentrated
illumination while still covering a substantial amount of area. We also offer optional optics with 10В° spot, 40В° narrow flood, 60В° flood, and 90В° wide
flood beam spreads. The spot beams are tightly focused and are designed for high elevation mounting to achieve distance, making spot versions
ideal for high mast and spots lighting. The flood beams are designed to provide more light over a larger area nearer the fixture, making flood
versions ideal for use as dedicated work and area lights.
GAU-LTL-150W-LED-LV low voltage lights are ideal replacements for fragile and hot running 400 watt metal halide lamps. They offer low power
requirements, high durability and a versatile mounting system that makes these LED light emitters a superior lighting solution for demanding
applications where power and reliability is critical. The heavy duty design and high power of these LED lights also makes them suitable for a wide
array of applications including but not limited to: high mast lighting, light towers, light plant LED retrofits, military, mining, industrial manufacturing,
machine visioning, security and law enforcement, commercial structure illumination, sport complexes, billboards, race tracks, and parking lots to
name a few.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per
bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs
for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The
end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours.
Durability: As well as unparalleled heat control, the GAU-LTL-150W-LED-LV series of LED lights from Larson Electronics also offer IP67 rated
construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature
changes of -40В° Celsius to +80В° Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast
aluminum and the optics are high transmission PMMA with 98% light transmittance. The BridgeluxВ® LEDs help these units achieve resistance to
vibrations and are rated at 70% lumen maintenance after 80,0000 hours of use. We recommend these LED lights for use in applications where a
lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.
Mounting: Each unit is equipped with a back mount trunnion style mounting bracket that allows the light to be attached to flat surfaces and
adjusted through 160В° of vertical movement. To adjust the unit after mounting, the user simply loosens the set screws located on either side of
the unit, moves it into the desired position, then re-tightens the screws. The base of the mounting trunnion is equipped with several machined
slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning.
11/18/2014
Page: 239
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
GAU-LTL-150W-LED-LV High Mast LED Light
Quick Summary
Lamp Type: BridgeluxВ® LED
400 Watt Metal Halide Replacement
Dimensions: 13.78"-L x 13.39"-W x 3.54"-D
Ambient Op Temp -40C to +80C
Weight: 36.38 Lbs
Ideal for Light Towers & LED Retrofits
Total Watts: 150
98% Transmission High Purity PMMA Optics
Total Lumens: 19,500
Multiple LED Banks for Heat Dispersion
Luminous Efficiency: 130 lm/w
130 Lumens Per Watt Efficiency
Beam Configurations: 10В° Spot, 25В° Wide Spot, 40В° Narrow Flood,
60В° Flood, or 90В° Wide Flood
70% Lumen Retention after 80,000 Hours
LED Color Temperature: Cool White - 5500-6500K
UL1012 Compliant
LED Life Expectancy: 80,000 hours
UL60950-1 Compliant
Optics Efficiency: 98% - PMMA High Transmittance Optics
CE Certified
Led Drive %: 90%
RoHS Compliant
Voltage:12-24V DC
IP67 Rated Waterproof
Amp Draw: 12.5A @ 12V, 6.25A @ 24V
Wiring: 10' Pigtail w/ Flying Leads
Mounting: Flat Surface Trunnion Mount U-Bracket
Materials: Die Cast Aluminum Housing, PMMA Optics
Special Orders- Requirements
Housing Color: Natural Aluminum
Contact us for special requirements
Ambient Temperature Range: -40В°C to +80В°C
Toll Free: 1-800-369-6671
Waterproof Rating: IP67
Intl: 1-903-498-3363
Warranty: Yes - 3 Years
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 240
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Marine Grade 70 Watt LED Spot / Flood Light - 9-48 Volts DC - 6020 Lumen - 5.8 amp draw
Part #: LED-BL-70W
Price: $730.00
11/18/2014
Page: 241
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The LED-BL-70W LED Boat Light offers high output from a compact form factor and is ideal for use in marine and boating
applications. A 6020 lumen output, 5.84 amp draw, 50,000 hour service life and 9 to 48 volt compatibility provides boaters with a
rugged, more powerful, and far more efficient LED alternative to fragile and power hungry halogen lamps.
The LED-BL-70W LED boat light from Larson Electronics produces 6,020 lumens of high intensity light while drawing only 70 watts @5.84 amps
from a 12 volt electrical system. Seven CREE XLamp MC-EВ® ten watt LEDs producing 860 lumens each are paired with high purity optics to
produce a beam approximately 750’ long by 110’ in width in spotlight configuration. We offer floodlight versions standard with a 40 degree beam
spread to provide more light over a larger area nearer the fixture, making flood versions ideal for use as spreader and area lights. These LED
light emitters are waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most
demanding marine environments, conditions and applications.
LED-BL-70W boat lights offer Pulse Width Modulation control, a small profile, low power requirements, high durability and a versatile mounting
system that makes these LED light emitters a superior lighting solution for marine applications where power and reliability is critical.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of
light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on
or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to automatically monitor and
adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LED-BL-70W series light
bars can operate on current ranging from 10 to 32 VDC without any modifications necessary as a result. This ability to sense and adjust input
current also provides protection against voltage spikes and drops that can occur in boat electrical systems which would otherwise result in
burning up or premature LED failure without it.
Durability: As well as unparalleled heat control, this series of LED boat lights from Larson Electronics also offers IP68 waterproof rated
construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature
changes of -40 degrees Celsius to 125 degrees Celsius, are waterproof to three meters, and resist ingress of dust, dirt and humidity. The CREE
XLamp MC-EВ® LEDs help these units achieve 15.6Grms rated resistance to vibrations and are rated at 70% lumen maintenance after 50,000
hours of use. We recommend these LED lights for use in marine applications where a lot of vibration, salt water, dampness and abusive weather
conditions are encountered.
Mounting:The trunnion mounting design on the LED10W-70 allows for post-installation angle positioning. This means that by loosening 2 thumb
bolts located on either side of the light, the operator can adjust the positioning angle of this light 270 degrees. Then he/she would simply have to
tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle.
Note: Most Larson Electronics LED-BL-70W, EDPM-5W-30, LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights
are terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights
ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
11/18/2014
Page: 242
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LED-BL-70W LED Boat Light
Internal LED Driver Features
Lamp Type: CREE XLamp MC-EВ® LED
Automatic Current Sensing and Adjusting 9-48VDC
Dimensions: 7"-Diam 3.5"-Depth
Active Heat Management
Watts: 70
Ambient Op Temp -40C to +125C
Led Drive %: 90%
Voltage:9 to 48VDC
Lighting Configuration: 20В° Spot or 40В° Flood
Mounting: Adjustable Single Stud Trunnion
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps:5.84 (on 12 volts)
Lumens: 6,020
Special Orders- Requirements
LED Light Color: White
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Weight: 11.02 Lbs
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 243
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Manual
11/18/2014
Page: 244
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
16 Watts LED Strip Light for Hazardous Location Lighting - 24" Surface Mount Bar - C1D2 - 12' Whip
Part #: HAL-24-16W-LED-12WH
Price: $802.08
Buy American Compliant
The Larson Electronics HAL-24-16W-LED-12WH is a low voltage explosion proof lighting solution with 12' wiring harness that is
approved for Class 1 Division 2 environments and ETL 1598 compliant for use in wet locations. This powerful 24.9" long LED strip light
produces 1208 lumens, operates from 12 or 24 VDC, and is suitable for a variety of applications.
The HAL-24-16W-LED-12WH is designed to provide a high output and ruggedly durable hazardous area lighting solution for applications where
Class 1 Division 2 compliance is required. This low voltage explosion proof light can be operated with either 12 or 24 volt DC current (choose
below) and includes 12 feet of connecting lead with standard two wire configuration. This light is constructed of powder coated extruded
aluminum for excellent strength and durability and is rated IP54 for protection against exposure to splashing water and limited dust ingress.
These units are configured in a 24.9" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The
high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less
reliable HID and halogen light fixtures.
Durability/Mounting: The HAL-24-16W-LED-12WH hazardous location LED light is constructed of extruded aluminum with a tough powder coat
finish for high strength and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and basic protection against
splashing water such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or
dusty conditions are commonly encountered.
The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree
LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life
than comparable LEDs.
Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust
the light 170В° vertically for the best placement. The entire assembly weighs 1.4 lbs and measures 24.9 inches in length, and 2.68 inches wide
and 1.69 inces deep, making it ideal for mounting in areas where space is limited and a low profile fixture more readily installed.
Wiring/Power: These hazardous area LED lights are equipped with 12 feet of cord containing a standard two wire (White+ Black-) connecting
configuration. These lights are not multi-voltage; each light is preconfigured for 12 or 24 volt DC current at 16.8 watts 1.3 amps on 12 VDC and
.66 amps on 24 VDC.
Versatility: The HAL-24-16W-LED-12WH is ETL approved for Class 1 Division 2 groups A,B,C and D locations. This unit carries an IP54 water
resistant rating ensuring protection against limited ingress from dusts, dirt, and basic protection against light water spray landing directly on the
fixture. This light is ideal for indoor or outdoor applications and industrial operations with hazardous location classification where dusty or wet
conditions are commonly encountered.
11/18/2014
Page: 245
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
HAL-24-16W-LED-12WH Hazardous Locaion LED Lighting
ETL Listed
Lamp Type: LED
Class 1 Division 2 Groups A,B,C,D
Dimensions: Lamp 24.90"-L 2.68" -W 1.69"- D
CSA 22.2 No. 250.0
Weight: 1.4lb | 0.6 k g
UL 1598
Watts: 16.8
IP54 Ingress Protection
Voltage: 12 or 24 VDC
T3 Temperature Rating
Lumens: 1208
Lamp Life Expectancy: 100,000 Hours
CRI: 75
Amps: 1.3 A @12 VDC | 0.66 A @ 24 VDC
Light Color: 6500K
Special Orders- Requirements
Beam Type: 100В° Flood or 30В° Spot
Contact us for special requirements
Mounting: Standard Triangle End Brackets
Toll Free: 1-800-369-6671
Temp Range: -40°C – +85°C
Intl: 1-903-498-3363
Wiring: 12Ft SOOW Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 246
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 247
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
25 Watt Class 1 Division 2 LED Fixture for Hazardous Location Lighting - 3 Foot Low Profile Light
Part #: GSLEDIP36-C1D2
Price: $794.88
Buy American Compliant
The Larson Electronics GSLEDIP36 is a low voltage hazardous location lighting solution approved for Class 1 Division 2 environments
and 1598 compliant for use in wet locations. This powerful 36" long LED strip light produces 1812 lumens, operates from 12 or 24 VDC,
and is suitable for a variety of applications.
The GSLEDIP36 is designed to provide a high output and ruggedly durable lighting solution for applications where Class1 Division 2 compliance
is required. This low voltage explosion proof light can be operated with either 12 or 24 volt DC current and includes 6 feet of connecting lead with
standard two wire configuration. This light is constructed of powder coated extruded aluminum for excellent strength and durability and is rated
IP54 for protection against exposure to splashing water and limited dust ingress. These units are configured in a 36" long strip or "bar" profile for
installation in locations where wide dispersal and a low profile is preferred. The high output, cool running operation, and good color rendering
properties of this light make it an ideal replacement for older, bulkier, and less reliable HID and halogen light fixtures.
Durability/Mounting: The GSLEDIP36 hazardous area LED light is constructed of extruded aluminum with a tough powder coat finish for high
strength and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and basic protection against splashing water
such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty conditions
are commonly encountered.
The LEDs in this linear light are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These
Cree LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and
operational life than comparable LEDs.
Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust
the light 170В° vertically for the best placement. The entire assembly weighs 2.1 lbs and measures 35.88 inches in length, 2.68 inches wide and
1.69 inches deep, making it ideal for mounting in areas where space is limited and a low profile fixture is more readily installed.
Wiring/Power: These hazardous location LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting
configuration. These lights operate from 12 or 24 volt DC current at 25.2 watts 1.3 amps on 12 VDC and .66 amps on 24 VDC.
Versatility: The HAL-36-25W-LED is ETL approved for Class 1 Division 2 groups A,B,C and D locations. This unit carries an IP54 water resistant
rating ensuring protection against limited ingress from dusts, dirt, and basic protection against light water spray landing directly on the fixture.
This light is ideal for indoor or outdoor applications and industrial operations with hazardous location classification where dusty or wet conditions
are commonly encountered.
11/18/2014
Page: 248
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
GSLEDIP Hazardous Location LED Lighting
ETL Listed
Lamp Type: LED
Class 1 Division 2 Groups A,B,C,D
Dimensions: Lamp 35.88"-L 2.68" -W 1.69"- D
CSA 22.2 No. 250.0
Weight: 2.1lb | 0.9 k g
1598
Watts: 25
IP54 Ingress Protection
Voltage: 12-24 VDC
T3 Temperature Rating
Lumens: 1812
Lamp Life Expectancy: 100,000 Hours
CRI: 75
Amps: 1.3 A @12 VDC | 0.66 A @ 24 VDC
Light Color: 6500K
Special Orders- Requirements
Beam Type: 100В° Flood
Contact us for special requirements
Mounting: Standard Triangle End Brackets
Toll Free: 1-800-369-6671
Temp Range: -40°C – +85°C
Intl: 1-903-498-3363
Wiring: 6Ft Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 249
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 250
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
25 Watt Low Profile LED Fixture for Hazardous Location Lighting - 36" Length - 12/24 Volts DC
Part #: HAL-36-25W-LED
Price: $794.88
Buy American Compliant
The Larson Electronics HAL-36-25W-LED is a low voltage hazardous location lighting solution approved for Class 1 Division 2
environments and 1598 compliant for use in wet locations. This powerful 36" long LED strip light produces 1812 lumens, operates from
12 or 24 VDC, and is suitable for a variety of applications.
The HAL-36-25W-LED is designed to provide a high output and ruggedly durable lighting solution for applications where Class1 Division 2
compliance is required. This low voltage explosion proof light can be operated with either 12 or 24 volt DC current and includes 6 feet of
connecting lead with standard two wire configuration. This light is constructed of powder coated extruded aluminum for excellent strength and
durability and is rated IP54 for protection against exposure to splashing water and limited dust ingress. These units are configured in a 36" long
strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool running operation, and
good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable HID and halogen light fixtures.
Durability/Mounting: The HAL-36-25W-LED hazardous area LED light is constructed of extruded aluminum with a tough powder coat finish for
high strength and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and basic protection against splashing
water such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty
conditions are commonly encountered.
The LEDs in this linear light are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These
Cree LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and
operational life than comparable LEDs.
Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust
the light 170В° vertically for the best placement. The entire assembly weighs 2.1 lbs and measures 35.88 inches in length, 2.68 inches wide and
1.69 inches deep, making it ideal for mounting in areas where space is limited and a low profile fixture is more readily installed.
Wiring/Power: These hazardous location LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting
configuration. These lights operate from 12 or 24 volt DC current at 25.2 watts 1.3 amps on 12 VDC and .66 amps on 24 VDC.
Versatility: The HAL-36-25W-LED is ETL approved for Class 1 Division 2 groups A,B,C and D locations. This unit carries an IP54 water resistant
rating ensuring protection against limited ingress from dusts, dirt, and basic protection against light water spray landing directly on the fixture.
This light is ideal for indoor or outdoor applications and industrial operations with hazardous location classification where dusty or wet conditions
are commonly encountered.
11/18/2014
Page: 251
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
HAL-36-25W-LED Hazardous Location LED Lighting
ETL Listed
Lamp Type: LED
Class 1 Division 2 Groups A,B,C,D
Dimensions: Lamp 35.88"-L 2.68" -W 1.69"- D
CSA 22.2 No. 250.0
Weight: 2.1lb | 0.9 k g
1598
Watts: 25
IP54 Ingress Protection
Voltage: 12-24 VDC
T3 Temperature Rating
Lumens: 1812
Lamp Life Expectancy: 100,000 Hours
CRI: 75
Amps: 1.3 A @12 VDC | 0.66 A @ 24 VDC
Light Color: 6500K
Special Orders- Requirements
Beam Type: 100В° Flood
Contact us for special requirements
Mounting: Standard Triangle End Brackets
Toll Free: 1-800-369-6671
Temp Range: -40°C – +85°C
Intl: 1-903-498-3363
Wiring: 6Ft Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 252
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- STEP
- DXF
11/18/2014
Page: 253
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LED Machine Light - 6, 10 Watt LEDs - 160'L X 120'W Work Area Beam - Runs off 110V
Part #: LEDP10W-60ET-F-M-110V
Price: $779.95
Buy American Compliant
The Larson Electronics LEDP10W-60ET-F-M-110V LED Machine Light offers high light output and extreme
durability combined with a versatile magnetic mounting system. This LED light emitter bar light runs on 110VAC
provided by an included inline power transformer. The 110 VAC capability of this light provides an extremely
rugged lighting solution that is ideal for use in industrial and manufacturing applications such as machine vision
system lighting, industrial machining illumination, blasting lighting and mining operations.
The LEDP10W-60ET-F-M-110V LED light bar from Larson Electronics produces a 160' long by 120' wide light beam with
5160 lumens of bright light. 6 CREE XLamp MC-EВ® LED Emitters containing ten watt LEDs producing 860 lumens each
are arranged in a single row and paired with high purity 40 degree optics to produce an evenly distributed output which is
much wider than the alternate spot beam, making this unit ideal for work area applications. We also offer these units in a 10
degree optic versions which produce a tightly focused spot beam with limited spread or light spillage. These LED light bars
are IP68 rated and waterproof to 3 feet, sealed against intrusion by dust and dirt, and very ruggedly constructed to
withstand the most demanding environments, conditions and applications.
The entire Larson Electronics LEDP10W series are constructed of extruded aluminum and feature heavier housings, rubber
isolated mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves,
hard rains, sand and high winds. This magnetic base allows fast and easy setup of this light on vehicles and equipment and
will hold the fixture in place at speeds up to 80 mph provided the mount is properly affixed and secure.
This LED light emitter bar light is designed to run on any voltage ranging from 9 Volts to 46 Volts. However, with our new
integrated inline transformer design, the fixture can now be operated with standard 110 VAC power found in standard wall
outlets. Essentially, this means the operator can use this LED light bar anywhere a wall plug in is available or, by
disconnecting the step down transformer, he/she can power this LED light emitter bar from any vehicle, equipment, ATV or
boat electrical system. You do not need to anything special to operate these light bars in their multi-voltage 9-46 Volt
configuration. They will sense the incoming voltage and adapt accordingly.
This unit is also shipped with 6' of additional SOOW cord, for a combined total length of 11' from the converter to the fixture.
In this particular light, a step down transformer converts the original 110 Volt current into 12 volts to accommodate the
fixture. If operator decides he/she would like to run off 9 - 46 VDC, all he/she has to do is disconnect from said transformer.
11/18/2014
Page: 254
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many
manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an
extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to
produce the maximum amount of power and longevity from the integrated Edison EdixeonВ® Emitters. The end result is
more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels
regardless of input levels across a specific range. These LEDLB series light bars can operate on current ranging from 9 to
42VDC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and
standalone applications such as those found on commercial boats, heavy equipment and vehicles where power systems
don’t always operate with 12 volts and external generators, transformers or inverters are impractical.
LEDP10W-60ET-F-M-110V 35В° Flood Beam
(Opt)
LEDP10W-60ET-F-M-110V 10В° Spot Beam
(Stnd)
Durability: The LEDP10W-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed
to withstand extremes of environmental and operating conditions. The LED lights with the �E’ part number designation are
designed for extreme durability and are larger and nearly twice as heavy as their standard counterparts. These units can
withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three feet and resist
ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum and the lenses are unbreakable
polycarbonate. The CREE XLamp MC-EВ® LEDs offer inherent LED resistance to shocks and vibrations contributing to
these units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory
conditions, high humidity climates, very cold areas and rough saltwater conditions. They are also well suited to
environments where equipment is used in one temperature extreme and stored in another temperature extreme.
Magnetic Mounting: The 2, 100 lbs magnet mounting design on the LEDP10W-60E-F-M-110V allows for easy fixture
placement and removal. Please note, the magnetic base on this unit increases the units overall height.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are
terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and
LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED
lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible
combos) will have different Deutsch connectors.
11/18/2014
Page: 255
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
CONDITIONS
Vin min (V) = 9
toff (us) = 2.9
Vin nom (V) = 12
R1 (kohm) = 50.2
Vin max (V) = 50
L1 (uH) = 3.0
Vo min (V) = 6.5
L-Pk (A) = 2.9
Vo nom (V) = 6.8
L-rms (A) = 2.9
Vo max (V) = 7
Ipk (A) = 2.5
I-LED (A) = 2.2
R2 (ohm) = 0.10
Efficiency = .85
I-FET (A) = 2.2
fsw nom (kHz) = 150
fs min (kHz) = 77
Ts nom (us) = 6.666667
fs max (kHz) = 301
Base frequency-
= 36~37Khz @ 12V
Amplitude of pulse width-
= 27Ms
Outside: External dimmer-
= 500Hz
Inside : Current sensing from-
77KHz at 12V to 300KHz at 50V
Specifications / Additional Information
LEDP10W-60ET-F-M-110V LED Light Bar
LEDLB LED Features
LEDs: 6 CREE XLamp MC-EВ® 10 Watt LED Emitters
CREE XLamp MC-EВ® 10 Watt LED Emitters
Dimensions: 11"-L 4.5"-H 3.56"-D
LEDs Driven At 80%
Watts: 60
-40 C~ +80C Operating Temp Range
Voltage:110 with included transformer- 9-42 VDC Without transformer
RoHS Compliant
Weight: 6.4 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
LED Chip Op Temp -40C to +125C
Mounting: 2, 100lbs. Magnetic Mounts
IP68 Rated Waterproof to 3ft
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps: 5 (on 12 volts) 2.5 (on 24 volts)
Lumens: 5160
Special Orders- Requirements
LED Light Color: 6000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
CE Certified
3 year warranty replacement on this LED light. After 30 days, the customer
ships the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement.
Scroll Down to Purchase-
11/18/2014
Page: 256
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Manual
11/18/2014
Page: 257
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
UL Listed 70 Watt LED Blasting Light - 7, 10-Watt CREE LEDs - 6020 Lumen - IP68 - PWM Circuitry
Part #: BL70-LED
Price: $729.00
Buy American Compliant
The BL70-LED blasting light is ideal for use in sand and media blasting applications where a powerful light capable withstanding the
harsh conditions of the blasting are is needed. Producing 6,020 lumens of light output, this light has a 50,000 hour rated service life
and the capability of operating with common 120-277 volt AC using the included inline transformer or 9-46 VDC without it.
The BL70-LED blasting light from Larson Electronics produces 6,020 lumens of bright light while drawing only 70 watts @6 amps from a 12 volt
electrical system. Seven CREE XLamp MC-EВ® ten watt LEDs producing 860 lumens each are paired with high purity optics to produce a flood
beam 300 feet long by 200 feet wide. We also offer a 20 degree spread spot beam configuration to produce a beam approximately 750’ long by
100’ in width. These LED light blasting lights are waterproof to 3 meters, sealed against intrusion by dust and dirt, and very ruggedly constructed
to withstand the most demanding environments, conditions and applications. A single 200 pound grip magnetic base enables the operator to use
the light as portable base stand unit on the floor, or they can use this LED blasting light as a magnetic mount back light.
This LED blasting light normally runs on any voltage ranging from 9 Volts to 46 Volts DC, but with the inlcuded DCP-11-DP inline transformer and
50 feet of SOOW cord, can also run from common 120V/277V AC. Operators can run these lights directly from a battery, generator vehicle, or by
using the included DCP-11-DP transformer, plug this unit into any available wall outlet, 220V, or 277VAC power source.
Optional LED colors include Amber and Green for more effective light penetration in the dusty environment of a media blasting room. An integral
Pulse Width Modulation controller, small profile, versatile power options, high durability and versatile mounting magnetic system makes these
LED light emitters a superior lighting solution for a wide array of applications including but not limited to: sand/media blasting, military, industrial
manufacturing, machine visioning, security and law enforcement, boating, vehicles and commercial structure illumination.
11/18/2014
Page: 258
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This photo shows an open field illuminated only by ambient light at
This photo shows the BL70-LED in spot configuration illuminating the
approximately 9:00 pm'.
same field, easily reaching distances of 750' in length
Click Photo to Enlarge
11/18/2014
Click Photo to Enlarge
Page: 259
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced PWM drivers
which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics
and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty
cycle” accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to
each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the
current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or
visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs
are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to tap into a provided input wire
with an external pulse generator and adjust the duty cycle of the current being applied to the LEDs. Thus you can connect an external dimmer,
switch or pulse control and adjust the perceived output of the light, effectively causing the light to flash, dim or brighten to the desired levels.
Additionally, this method of controlling light output results in a corresponding drop in amperage draw, so if the duty cycle is cut back to 50% there
will be a matching 50% reduction in amperage draw. These units are also able to monitor and adjust input current to maintain the correct LED
voltage levels regardless of input levels across a specific range.
When equipped with the inline transformer, the LEDP10W series of light bars can operate on current ranging from 9 to 46 VDC without any
modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops that
can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it.
Durability: As well as unparalleled heat control, the LEDP10W series of LED light bars from Larson Electronics also offer IP68 rated construction
that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40
degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed
from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp MC-EВ® LEDs offer resistance to shocks and
vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use.
Mounting: This LED blasting light has a single 200 lbs grip magnetic base that can hold the unit in place even under high vibratory conditions.
An integrated trunnion bracket allows operators to adjust the light through a full range of vertical movement, providing the ability to aim the light
regardless of where it is mounted for best light coverage.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as
part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
Protective Mylar covers are available to protect the lens faceplate and catch overspray in coating applications. The adhesive backed Mylar lens
covers can be peeled off and replaced easily. Order protective covers below in the related products category.
BL70-LED 40В° Flood Beam
(STND)
BL70-LED 20В° Wide Spot Beam (OPT)
11/18/2014
Page: 260
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
CONDITIONS
Vin min (V) = 9
toff (us) = 2.9
Vin nom (V) = 12
R1 (kohm) = 50.2
Vin max (V) = 50
L1 (uH) = 3.0
Vo min (V) = 6.5
L-Pk (A) = 2.9
Vo nom (V) = 6.8
L-rms (A) = 2.9
Vo max (V) = 7
Ipk (A) = 2.5
I-LED (A) = 2.2
R2 (ohm) = 0.10
Efficiency = .85
I-FET (A) = 2.2
fsw nom (kHz) = 150
fs min (kHz) = 77
Ts nom (us) = 6.666667
fs max (kHz) = 301
Base frequency-
= 36~37Khz @ 12V
Amplitude of pulse width-
= 27Ms
Outside: External dimmer-
= 500Hz
Inside : Current sensing from-
77KHz at 12V to 300KHz at 50V
Specifications / Additional Information
BL70-LED
Internal LED Driver Features
Lamp Type: CREE XLamp MC-EВ® LED
Fast average current control
Dimensions: 7 "-Diameter
Programmable off-time switching
Watts: 70
Linear dimming input
Led Drive %: 90%
PWM dimming input
Voltage: 120 - 277 VAC With Transformer, 9-46 VDC Without
Short protection w/Skip mode
Lighting Configuration: 20В° Spot or 40В° Flood
Ambient Op Temp -40C to +125C
Mounting: 200 lbs Grip Magnetic Base
Pin-compatible with the HV9910B
Wiring: 50' SOOW Cord - Deutsch IPD / LADD DT04-2P connector
View Avg-Mode Driver Control PDF
Amps: 6 (on 12 volts) 3.35 amps (on 24 volts)
Lumens: 6,020
Special Orders- Requirements
LED Light Color: 6000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Flood Beam:Lux @1 meter= 17,500 @3 meters= 1,900
Spot Beam: Lux @1 meter= 31,000 @3 meters= 4,000
11/18/2014
Page: 261
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
CE Certified
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 262
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
16 Watt LED Strip Light for Hazardous Location Lighting - Class 1 Div 2 - 120-240V AC
Part #: HAL-24-16W-LED-1227
Price: $717.60
Buy American Compliant
The Larson Electronics HAL-24-16W-LED-1227 is a low voltage explosion proof lighting solution approved for Class 1 Division 2
environments and ETL 1598 compliant for use in wet locations. This powerful 24.9" long LED strip light produces 1208 lumens,
operates from 120-240 VAC, and is suitable for a variety of applications.
The HAL-24-16W-LED-1227 is designed to provide a high output and ruggedly durable hazardous area lighting solution for applications where
Class 1 Division 2 compliance is required. This explosion proof linear strip light can be operated on 120 to 240 volt AC voltages and includes 6
feet of SOOW cable and is terminated in a 5-15 explosion proof straight blade plug. This light is constructed of powder coated extruded
aluminum for excellent strength and durability and is rated IP54 for protection against exposure to splashing water and limited dust ingress.
These units are configured in a 24.9" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The
high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less
reliable HID and halogen light fixtures.
Durability/Mounting: The HAL-24-16W-LED-1227 hazardous location LED light is constructed of extruded aluminum with a tough powder coat
finish for high strength and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and basic protection against
splashing water such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or
dusty conditions are commonly encountered.
The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree
LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life
than comparable LEDs.
Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust
the light 170В° vertically for the best placement. The entire assembly weighs 1.4 lbs and measures 24.9 inches in length, and 2.68 inches wide
and 1.69 inces deep, making it ideal for mounting in areas where space is limited and a low profile fixture more readily installed.
Wiring/Power: These hazardous location LED lights are equipped with 6 feet of cord containing an explosion proof 5-15 plug rated at 15 amps.
These lights operate from 120-240 volt AC at drawing 0.014 amps on 120V AC and 0.067 amps on 240V AC.
Versatility: The HAL-24-16W-LED-1227 is ETL approved for Class 1 Division 2 groups A,B,C and D locations. This unit carries an IP54 water
resistant rating ensuring protection against limited ingress from dusts, dirt, and basic protection against light water spray landing directly on the
fixture. This light is ideal for indoor or outdoor applications and industrial operations with hazardous location classification where dusty or wet
conditions are commonly encountered.
11/18/2014
Page: 263
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
HAL-24-16W-LED-1227 Hazardous Locaion LED Lighting
ETL Listed
Lamp Type: LED
Class 1 Division 2 Groups A,B,C,D
Dimensions: Lamp 24.90"-L 2.68" -W 1.69"- D
CSA 22.2 No. 250.0
Weight: 1.4lb | 0.6 k g
1598
Watts: 16.8
IP54 Ingress Protection
Voltage: 120-240 VAC
T3 Temperature Rating
Lumens: 1208
Lamp Life Expectancy: 100,000 Hours
CRI: 75
Amps: 1.3 A @12 VDC | 0.66 A @ 24 VDC
Light Color: 6500K
Special Orders- Requirements
Beam Type: 100В° Flood
Contact us for special requirements
Mounting: Standard Triangle End Brackets
Toll Free: 1-800-369-6671
Temp Range: -40°C – +85°C
Intl: 1-903-498-3363
Wiring: 6Ft Lead w/ EPP-15A Explosion Proof Plug
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 264
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- STEP
- DXF
11/18/2014
Page: 265
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
25 Watt General Area Use LED Light Fixture - 36" Light Bar
Part #: GAU-36-25W-LED
Price: $712.80
Buy American Compliant
The Larson Electronics GAU-36-25W-LED is a low voltage lighting solution approved for use in wet locations. This powerful 36" long
LED strip light produces 1812 lumens, operates from 12 or 24 VDC, and is suitable for a variety of applications.
The GAU-36-25W-LED is designed to provide a high output and ruggedly durable lighting solution. This low voltage light can be operated with
either 12 or 24 volt DC current and includes 6 feet of connecting lead with standard two wire configuration. This light is constructed of powder
coated extruded aluminum for excellent strength and durability and is rated IP54 for protection against exposure to splashing water and limited
dust ingress. These units are configured in a 36" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is
preferred. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older,
bulkier, and less reliable HID and halogen light fixtures.
Durability/Mounting: The GAU-36-25W-LED LED light is constructed of extruded aluminum with a tough powder coat finish for high strength
and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and basic protection against splashing water such as
rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty conditions are
commonly encountered.
The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree
LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life
than comparable LEDs.
Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust
the light 170В° vertically for the best placement. The entire assembly weighs 2.1 lbs and measures 35.88 inches in length and 2.68 inches wide
and 1.69" deep, making it ideal for mounting in areas where space is limited and a low profile fixture is more readily installed.
Wiring/Power: These LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting configuration.
These lights operate from 12 or 24 volt DC current at 25.2 watts 1.3 amps on 12 VDC and .66 amps on 24 VDC.
Versatility: This unit carries an IP54 water resistant rating ensuring protection against limited ingress from dusts, dirt, and basic protection
against light water spray landing directly on the fixture. This light is ideal for indoor or outdoor applications and industrial operations with
hazardous location classification where dusty or wet conditions are commonly encountered.
11/18/2014
Page: 266
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
GAU-36-25W-LED LED Bar
GAU-36-25W-LED Ratings
Lamp Type: LED
IP54 Ingress Protection
Dimensions: Lamp 35.88"-L 2.68" -W 1.69"- D
T3 Temperature Rating
Weight: 2.1lb | 0.9 k g
Watts: 25.2 W
Voltage: 12-24 VDC
Lumens: 1812
Lamp Life Expectancy: 100,000 Hours
CRI: 75
Amps: 1.3 A @12 VDC | 0.66 A @ 24 VDC
Light Color: 6500K
Special Orders- Requirements
Beam Type: 100В° Flood
Contact us for special requirements
Mounting: Standard Triangle End Brackets
Toll Free: 1-800-369-6671
Temp Range: -40°C – +85°C
Intl: 1-903-498-3363
Wiring: 6Ft Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 267
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 268
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- STEP
- DXF
11/18/2014
Page: 269
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
25 Watt LED Cabinet Light Fixture - 36" Light Bar - White Housing - Low Voltage Strip Light
Part #: GSLEDIP36-GEN-WHT
Price: $712.80
Buy American Compliant
The Larson Electronics GSLEDIP36-GEN-WHT is a low voltage lighting solution approved for use in wet locations. This powerful 36"
long LED strip light produces 1812 lumens, operates from 12 or 24 VDC, and is suitable for a variety of applications.
The GSLEDIP36-GEN-WHT is designed to provide a high output and ruggedly durable lighting solution. This low voltage light can be operated
with either 12 or 24 volt DC current and includes 6 feet of connecting lead with standard two wire configuration. This light is constructed of
powder coated extruded aluminum for excellent strength and durability and is rated IP54 for protection against exposure to splashing water and
limited dust ingress. These units are configured in a 36" long strip or "bar" profile for installation in locations where wide dispersal and a low
profile is preferred. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for
older, bulkier, and less reliable HID and halogen light fixtures.
Durability/Mounting: The GSLEDIP36-GEN-WHT LED light is constructed of extruded aluminum with a tough powder coat finish for high
strength and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and basic protection against splashing water
such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty conditions
are commonly encountered.
The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree
LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life
than comparable LEDs.
Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust
the light 170В° vertically for the best placement. The entire assembly weighs 2.1 lbs and measures 35.88 inches in length and 2.68 inches wide
and 1.69" deep, making it ideal for mounting in areas where space is limited and a low profile fixture is more readily installed.
Wiring/Power: These LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting configuration.
These lights operate from 12 or 24 volt DC current at 25.2 watts 1.3 amps on 12 VDC and .66 amps on 24 VDC.
Versatility: This unit carries an IP54 water resistant rating ensuring protection against limited ingress from dusts, dirt, and basic protection
against light water spray landing directly on the fixture. This light is ideal for indoor or outdoor applications and industrial operations with
hazardous location classification where dusty or wet conditions are commonly encountered.
11/18/2014
Page: 270
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
GSLEDIP36-GEN-WHT LED Bar
GSLEDIP36-GEN-WHT Ratings
Lamp Type: LED
IP54 Ingress Protection
Dimensions: Lamp 35.88"-L 2.68" -W 1.69"- D
T3 Temperature Rating
Weight: 2.1lb | 0.9 k g
Watts: 25.2 W
Voltage: 12-24 VDC
Lumens: 1812
Lamp Life Expectancy: 100,000 Hours
CRI: CW: 75, NW: 75, WW: 80
Amps: 1.3 A @12 VDC | 0.66 A @ 24 VDC
Light Color: CW: 6500K, NW: 4300K, WW: 3500K
Beam Type: 100В° Flood or 30В° Spot
Special Orders- Requirements
Lens: Clear of Frosted
Contact us for special requirements
Mounting: Standard Triangle End Brackets
Toll Free: 1-800-369-6671
Temp Range: -40°C – +85°C
Intl: 1-903-498-3363
Wiring: 6Ft Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 271
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
60 Watt High Intensity LED Light - 6 LEDs - 5,521 Lumens - Degreed Aiming - Soft Start LEDs
Part #: LED10WSA-60
Price: $703.50
11/18/2014
Page: 272
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The LED10WSA-60 LED Light offers high output from a compact form factor and is ideal for use in mining applications as well as
heavy equipment, hunting, boating, vehicle, military, law enforcement and industrial manufacturing uses. A 5,521 lumen output, 50,000
hour service life and 12-24 volt compatibility provides operators with a rugged and powerful LED alternative to 175 watt metal halide
lamps that uses little power and can withstand rugged use and abusive mining conditions.
The LED10WSA-60 high output LED light from Larson Electronics produces 5,521 lumens of high intensity light while drawing only 60 watts
@4.94 amps from a 12 volt electrical system. Six CREE XM-L2В® ten watt LEDs producing 920 lumens each are arranged in rows and paired with
high purity optics to produce a well focused 10В° spot beam that is ideal for providing far reaching concentrated illumination while still covering a
substantial amount of area. We also offer optional floodlight versions with a 40В° or 60В° beam spread to provide more light over a larger area
nearer the fixture, making flood versions ideal for use as dedicated work and area lights. These LED light bars are waterproof to 3 meters, sealed
against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding environments, conditions and applications.
LED10WSA-60 lights are ideal replacements for fragile and hot running 175 watt metal halide lamps. They offer soft start technology, a small
profile, low power requirements, high durability and a shock dampening mounting system that makes these LED light emitters a superior lighting
solution for rough applications where power and reliability is critical. The heavy duty design and high power of these LED lights also makes them
suitable for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning, mining, security and law
enforcement, boating, vehicles and commercial structure illumination.
Protection: These high output LED light bars feature soft start technology, allowing the LEDs to gradually increase to maximum intensity
instead. Low in rush current at start-up reduces wear on associated components, increasing overall life of the internal electronics and improves
downtime. Built in redundancy lessens chance of full fixture failure, while the reverse polarity operation protects the fixture from shorting the
internal components.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of
light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on
or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
Voltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels
regardless of input levels across a specific range. These LED10WSA series light bars can operate on current ranging from 11 to 65 VDC without
any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops
that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it.
Durability: As well as unparalleled heat control, the LED10WSA series of LED lights from Larson Electronics also offer IP69K rated construction
that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40В°C
to +80В°C, are waterproof to three meters, can withstand high pressure and high temperature wash downs, and resist ingress of dust, dirt and
humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XM-L2В® LEDs help these
units achieve up to 60Grms rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend
these LED lights for use in applications that require regular intensive cleaning and are exposed to a lot of vibration, dust, dirt, and abusive
working conditions are encountered.
Mounting: Each unit is equipped with an innovative trunnion style mounting bracket that allows the light to be attached to flat surfaces and
adjusted through 360 degrees of vertical movement. The LED light head is secured to the mounting bracket with shock dampening rotating
inserts. The insert provides precision aiming down to 1В° while providing increased longevity to the LED fixture. To vertically adjust the unit after
mounting, the user simply loosens the screws located on either side of the unit, moves it into the desired position, then retightens the screws.
The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and slide the unit
for precise mount positioning. The stainless steel trunnion bracket has preset angles marked in 5В° intervals, allowing operators to precisely aim
each fixture.
Note: The LED10WSA series feature gold plated DT connectors to provide better conductivity. Most Larson Electronics LEDP5W-30, LEDLB,
LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The
mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending
on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating,
IR/Visible combos) will have different Deutsch connectors.
Applications for the LEDP10WSA include but are not limited to mining, dump trucks, construction machinery, cement mixers, and car washes.
11/18/2014
Page: 273
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LED10WSA-60 High Output LED Light
LED10WSA-60 Series Features
Lamp Type: CREE XL-L2В® LED
Automatic Current Sensing and Adjusting
Dimensions: 6.59"-L 5.20 "-H 3.98"-D
Active Heat Management
Watts: 60
Ambient Op Temp -40В°C to +80В°C
Led Drive %: 90%
IP69K High Temp High Pressure Wash Down
Voltage: Universal Voltage 11-65V DC
EMC/EMI CISPR 25 Class 3 Rated
Beam Spread: 10В° Spot, 40В° Flood, 60В° Flood, 30В°/60В° Elliptical
304 Stainless Steel Mounting Hardware
Mounting: Flat Surface 304 SS Bracket - 360 Degree Adjustable
Shock Dampening Mounting System
Wiring: Gold Plated Deutsch IPD / LADD DT04-2P connector
Amps: 4.94 (on 12 volts) - 2.47 (on 24 volts)
Lumens: 5,521
Special Orders- Requirements
LED Light Color: White
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black
Weight: 13.23 Lbs
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 274
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Infrared LED Light Bar w/ Magnetic Trunnion Mount - 20 IR LEDs - 60 Watts 750/850/940nm - Extreme
Part #: LEDLB-20ET-M-IR
Price: $679.00
Buy American Compliant
The Larson Electronics LEDLB-20ET-M-IR LED Light Bar offers high infrared light output and extreme durability combined with a
versatile trunnion mounting system that provides 270 degrees of adjustability. This IP68 rated infrared LED light bar is waterproof to
three feet and produces an infrared light beam that can only be seen through the use of night vision goggles. 750Nm, 850Nm or 940Nm
versions. This light can run on any voltage from 9 to 42 volts and provides an extremely rugged infrared lighting solution that is ideal
for use in commercial and industrial security applications as well as military environments.
The LEDLB-20ET-M-IR magnetic mount infrared LED light bar from Larson Electronics produces light in the infrared 750Nm, 850Nm or 940Nm
end of the light spectrum depending upon the version selected. Twenty Edison EdixeonВ® 3 watt infrared emitters are arranged in rows and paired
with high purity 10 degree optics to produce a tightly focused spot beam 800' long by 80' wide. We offer optional floodlight versions of this light
that have 35 degree optics to produce a wider beam spread and more light over a larger area nearer the fixture. These LED light bars are IP68
rated and waterproof to 3 feet, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding
environments, conditions and applications. The entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and feature
heavier housings, rubber isolated mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts,
waves, hard rains, sand and high winds.
LEDLB-20ET-M-IR35В° Flood Beam (Opt)
LEDLB-20ET-M-IR10В° Spot Beam (Stnd)
11/18/2014
Page: 275
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Edison EdixeonВ® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels
across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as
a result. This multi-voltage capability makes these units ideal for mobile and stand alone applications such as those found on boats, heavy
equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are
impractical.
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of
environmental and operating conditions. The LED lights with the �E’ part number designation are designed for extreme durability and are larger
and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85
degrees Celsius, are waterproof to three feet and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum
and the lenses are unbreakable polycarbonate. The EdixeonВ® LEDs offer inherent LED resistance to shocks and vibrations contributing to these
units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates,
very cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme
and stored in another temperature extreme.
Click here to view an article on the Generations of Night Vision and Infrared.
Adjustable Mounting: The magnetic trunnion mounting design on the LEDLB-20ET-IR allows for post-installation angle positioning. This means
that by loosening 2 thumb bolts located on either side of the light, the operator can adjust the positioning angle of this light 270 degrees. Then
he/she would simply have to tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle. The dual 100 lbs magnet
mounting design on the LEDLB-20ET-M-IR allows for easy fixture placement and removal. This mounting system includes a power cord with a
cigarette plug connector which makes this unit ideal for vehicle and equipment lighting applications where the unit can simply be attached or
removed as needed. Please note, the magnetic base on this unit increases the units overall height.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as
part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
11/18/2014
Page: 276
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-20ET-M-IR LED Light Bar
LEDLB LED Features
LEDs: 20 EdixeonВ® 3 Watt IR LED Emitters
EdixeonВ® 3 Watt IR LED Emitters
Dimensions: 12"-L 3"-H 3.57"-D
LEDs Driven At 80%
Watts: 60
-40 C~ +80C Operating Temp Range
Voltage: 9-42 VDC
RoHS Compliant
Spot Beam: 800'L x 80'W
70% Lumen Retention @65,000 hours
Flood Beam: 250'L x 250'W
LED Chip Op Temp -40C to +110C
Weight: 6.4 Lbs
IP68 Rated Waterproof to 3ft
Lighting Configuration: 10В° Spot or 35В° Flood
Mounting: Trunnion Bracket
CE Certified
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps: 5 (on 12 volts) 2.5 (on 24 volts)
Lumens: 3600
Special Orders- Requirements
Wavelength: 750Nm, 850Nm or 940Nm
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 277
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 278
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 279
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LED Light Bar w/ Trunnion Mount on Double Ball Mount Joint - 6, 10-Watt LEDs - 200lb. Magnetic Base
Part #: LEDP10W-60ET-DBM-I
Price: $649.95
11/18/2014
Page: 280
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The Larson Electronics LEDP10W-60ET-DBM-I LED Light Bar offers high light output and extreme durability
combined with a versatile trunnion and double ball joint mount with magnetic base. The magnetic base provides
200 lbs of magnetic grip while a double ball joint and trunnion mount provides the operator with the ability to
adjust the unit to a wide variety of positions while mounted. This LED light emitter bar light runs on 110VAC
provided by an included inline power transformer.
The LEDP10W-60ET-DBM-I LED light bar from Larson Electronics produces 5,160 lumens of light while drawing only 60
watts @5 amps from a 12 volt electrical system. Six CREE XLamp MC-EВ® ten watt LEDs producing 860 lumens each are
paired with high purity optics to produce a 15 degree spread spot beam approximately 525’ long by 80’ in width. We also
offer floodlight versions with a 40 degree beam spread to provide more light over a larger area nearer the fixture, making
flood versions ideal for use as work lights. These LED light bars are waterproof to 3 meters, sealed against intrusion by
dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications.
These LED light bars are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt, and very
ruggedly constructed to withstand the most demanding environments, conditions, and applications. The entire Larson
Electronics LEDP10W series are constructed of extruded aluminum and feature heavier housings, rubber isolated mounts
and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains, sand
and high winds.
11/18/2014
Page: 281
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many
manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an
extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to
produce the maximum amount of power and longevity from the integrated CREE XLamp MC-EВ® Emitters. The end result is
more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels
regardless of input levels across a specific range. These LEDP10W series light bars can operate on current ranging from 9
to 46VDC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile
and stand alone applications such as those found on commercial boats, heavy equipment and vehicles where power
systems don’t always operate with 12 volts and external generators, transformers or inverters are impractical.
LEDP10W-60ET-DBM-I 35В° Flood Beam
(Opt)
LEDP10W-60ET-DBM-I 10В° Spot Beam
(Stnd)
Durability: The LEDP10W series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to
withstand extremes of environmental and operating conditions. The LED lights with the �E’ part number designation are
designed for extreme durability and are larger and heavier than the standard LEDP10W series lights and are nearly twice
as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to
85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity.
The housings are formed from thick extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp
MC-EВ® LEDs offer inherent LED resistance to shocks and vibrations contributing to these units 15.6Grms rating of vibration
tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates, very cold
areas and rough saltwater conditions. They are also well suited to environments where equipment is used in one
temperature extreme and stored in another temperature extreme.
Adjustable Mounting: A magnetic base with a 200 lb grip temporarily secures this unit to various metallic surfaces while a
double ball joint mount allows 360 degrees of rotation and 140 degrees of tilt. To adjust this LED unit simply loosen the
thumb bolt located on the side of unit, position the light head as desired, then retighten the thumb screw. The light head can
be further adjusted by loosening the thumb screws on either side of the light head and moving the light head through 270
degrees of vertical tilt. This mounting system will hold the unit securely in place, even under rough working or driving
conditions, and provides an extreme level of placement versatility.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are
terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and
LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED
lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible
combos) will have different Deutsch connectors.
11/18/2014
Page: 282
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDP10W-60ET-DBM-I LED Light Bar
LEDP10W LED Features
LEDs: 6 CREE XLamp MC-EВ® 10 Watt LED Emitters
CREE XLamp MC-EВ® 10 Watt LED Emitters
Dimensions: 8.25"-L 3"-H 3.56"-D
LEDs Driven At 80%
Watts: 60
-40 C~ +80C Operating Temp Range
Voltage: 110 with Transformer- 9-46 VDC Without Transformer
RoHS Compliant
Weight:
5.6 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 15В° Spot or 40В° Flood
LED Chip Op Temp -40C to +125C
Mounting: Trunnion with Double Ball Joint and Magnetic Base
IP68 Rated Waterproof to 3 meters
Wiring: 10' SOOW Cable with Converter
Amps: 5 (on 12 volts) 2.5 (on 24 volts)
Lumens: 5160
Special Orders- Requirements
LED Light Color: 6000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Lux-Spot : @Lens: 192,900 @ 1 Meter 17,000
Lux-Flood : @Lens: 186,500 @ 1 Meter 1,930
CE Certified
3 year warranty replacement on this LED light. After 30 days, the customer
ships the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement.
Scroll Down to PurchaseThis LED light emitter bar light is designed to run directly off of any voltage ranging from 9 Volts to 46 Volts. However, with
our new integrated inline transformer design, the fixture can now be operated with standard 110 VAC power found in
common wall outlets. Essentially, this means the operator can use this LED light bar anywhere a wall plug in is available or,
by disconnecting the step down transformer, he/she can power this LED light emitter bar from any vehicle, equipment, ATV
or boat electrical system.
You do not need to anything special to operate these light bars in their multi-voltage 9-46 Volt configuration. They will
sense the incoming voltage and adapt accordingly. If operator decides he/she would like to run off 9 - 46 VDC, all he/she
has to do is disconnect from said transformer.
11/18/2014
Page: 283
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Manual
11/18/2014
Page: 284
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Magnetic Mount LED Light Emitter w/ Trunnion Bracket -Extreme Environment - 9-42VDC - 750' Spot Beam
Part #: LEDLB-20ET-M
Price: $522.00
Buy American Compliant
The Larson Electronics LEDLB-20ET-M LED Light Bar offers high light output and extreme durability combined with a versatile
trunnion mounting system that provides 270 degrees of adjustability. This IP68 rated LED light bar is waterproof to three feet and
produces 3,600 lumens while drawing only 60 watts of power @5 amps from a 12 volt electrical system. This light can run on any
voltage from 9 to 42 volts and comes equipped with a 16 foot coil cord cigarette plug-in adapter.
The LEDLB-20ET-M LED light bar from Larson Electronics produces an 750' long by 110' wide light beam with 3,600 lumens of bright light. In a
flood configuration, this becomes an LED spreader light and covers 300' in length by 230' in width, making it ideal as a work or area light. Twenty
Edison EdixeonВ® Emitters containing CREE EZBrightВ® three watt LEDs producing 180 lumens each are arranged in rows and paired with high
purity 10 degree optics to produce a tightly focused spot beam with limited spread or light spillage. These LED light bars are IP68 rated and
waterproof to 3 feet, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments,
conditions and applications. The entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier housings,
rubber isolated mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains,
sand and high winds.
Shown above, vehicle headlights only...
Headlights supported with LED light bar.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 285
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Edison EdixeonВ® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels
across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as
a result. This multi-voltage capability makes these units ideal for mobile and stand alone applications such as those found on commercial boats,
heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are
impractical.
LEDLB-20ET-M 35В° Flood Beam
(Opt)
LEDLB-20ET-M 10В° Spot Beam
(Stnd)
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of
environmental and operating conditions. The LED lights with the �E’ part number designation are designed for extreme durability and are larger
and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85
degrees Celsius, are waterproof to three feet and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum
and the lenses are unbreakable polycarbonate. The EdixeonВ® LEDs offer inherent LED resistance to shocks and vibrations contributing to these
units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates,
very cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme
and stored in another temperature extreme.
Magnetic Mounting: The dual 100 lbs magnet mounting design on the LEDLB-20ET-M allows for easy fixture placement and removal. This
mounting system includes a power cord with a cigarette plug connector which makes this unit ideal for vehicle and equipment lighting
applications where the unit can simply be attached or removed as needed. Please note, the magnetic base on this unit increases the units overall
height.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as
part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
11/18/2014
Page: 286
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-20ET-M LED Light Bar
LEDLB LED Features
LEDs: 20 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 12"-L 3"-H 3.57"-D
LEDs Driven At 80%
Watts: 60
-40 C~ +80C Operating Temp Range
Voltage: 9-42 VDC
Spot Beam: 800'L x 80'W
RoHS Compliant
Flood Beam: 250'L x 250'W
Weight: 7.4Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
LED Chip Op Temp -40C to +125C
Mounting: Trunnion Bracket w/ Dual 100lb. Magnets
IP68 Rated Waterproof to 3ft
Wiring: 16' Coil Cord Cigarette Plug-in Adapter
Amps: 5 (on 12 volts) 2.5 (on 24 volts)
Lumens: 3600
Special Orders- Requirements
LED Light Color: 6000K or 3000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Lux-Spot : @Lens: 188,400 @ 1 Meter 24,800
Lux-Flood : @Lens: 199,800 @ 1 Meter 4,450
CE Certified
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 287
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 288
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- SpecSheet French
- SpecSheet Arabic
- Manual
11/18/2014
Page: 289
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LED light emitter - extreme environment - Adjustable wall mount - 20 LEDs - 60 Watts - 9-42 VDC
Part #: LEDLB-20ET
Price: $492.00
Buy American Compliant
The Larson Electronics LEDLB-20ET LED Light Bar offers high light output and extreme durability combined with a versatile trunnion
mounting system that provides 270 degrees of adjustability. This IP68 rated LED light bar is waterproof to three feet and produces
3,600 lumens while drawing only 60 watts of power @5 amps from a 12 volt electrical system. This light can run on any voltage from 9
to 42 volts and provides an extremely rugged lighting solution that is ideal for use in commercial marine environments as well as
industrial and manufacturing applications such as machine vision system lighting, heavy equipment illumination, blasting lighting and
mining operations.
The LEDLB-20ET LED light bar from Larson Electronics produces an 750' long by 110' wide light beam with 3,600 lumens of bright light. In a
flood configuration, this becomes an LED spreader light and covers 300' in length by 230' in width, making it ideal as a work or area light. Twenty
Edison EdixeonВ® Emitters containing CREE EZBrightВ® three watt LEDs producing 180 lumens each are arranged in rows and paired with high
purity 10 degree optics to produce a tightly focused spot beam with limited spread or light spillage. These LED light bars are IP68 rated and
waterproof to 3 feet, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments,
conditions and applications. The entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier housings,
rubber isolated mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains,
sand and high winds.
Shown above, vehicle headlights only...
Headlights supported with LED light bar.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 290
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Edison EdixeonВ® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels
across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as
a result. This multi-voltage capability makes these units ideal for mobile and standalone applications such as those found on commercial boats,
heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are
impractical.
LEDLB-20ET 35В° Flood Beam
(Opt)
LEDLB-20ET 10В° Spot Beam
(Stnd)
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of
environmental and operating conditions. The LED lights with the �E’ part number designation are designed for extreme durability and are larger
and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85
degrees Celsius, are waterproof to three feet and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum
and the lenses are unbreakable polycarbonate. The EdixeonВ® LEDs offer inherent LED resistance to shocks and vibrations contributing to these
units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates,
very cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme
and stored in another temperature extreme.
Adjustable Mounting: The trunnion mounting design on the LEDLB-20ET allows for post-installation angle positioning. This means that by
loosening 2 thumb bolts located on either side of the light, the operator can adjust the positioning angle of this light 270 degrees. Then he/she
would simply have to tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle. We also offer a BC-2 bar clamp
mounting system you can view here for even greater mounting versatility.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as
part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
11/18/2014
Page: 291
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-20ET LED Light Bar
LEDLB LED Features
LEDs: 20 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 12"-L 3"-H 3.57"-D
LEDs Driven At 80%
Watts: 60
-40 C~ +80C Operating Temp Range
Voltage: 9-42 VDC
Spot Beam: 800'L x 80'W
RoHS Compliant
Flood Beam: 250'L x 250'W
Weight: 6.4Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
LED Chip Op Temp -40C to +125C
Mounting: Trunnion Bracket
IP68 Rated Waterproof to 3ft
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps: 5 (on 12 volts) 2.5 (on 24 volts)
Lumens: 3600
Special Orders- Requirements
LED Light Color: 6000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Lux-Spot : @Lens: 188,400 @ 1 Meter 24,800
Lux-Flood : @Lens: 199,800 @ 1 Meter 4,450
CE Certified
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 292
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- SpecSheet French
- SpecSheet Arabic
- Dimensional Drawing
- Manual
- SpectrumChart
11/18/2014
Page: 293
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Infrared LED Light Bar w/ Trunnion Mount - Extreme Environment - 20 IR LEDs -60 Watts 750/850/940nm
Part #: LEDLB-20ET-IR
Price: $629.00
Buy American Compliant
The Larson Electronics LEDLB-20ET-IR LED Light Bar offers high infrared light output and extreme durability combined with a
versatile trunnion mounting system that provides 270 degrees of adjustability. This IP68 rated infrared LED light bar is waterproof to
three feet and produces an infrared light beam that can only be seen through the use of night vision goggles. 750Nm, 850Nm or 940Nm
versions. This light can run on any voltage from 9 to 42 volts and provides an extremely rugged infrared lighting solution that is ideal
for use in commercial and industrial security applications as well as military environments.
The LEDLB-20ET-IR infrared LED light bar from Larson Electronics produces light in the infrared 750Nm, 850Nm or 940Nm end of the light
spectrum depending upon the version selected. Twenty Edison EdixeonВ® 3 watt infrared emitters producing 180 lumens each are arranged in
rows and paired with high purity 10 degree optics to produce a tightly focused spot beam 800' long by 80' wide. We offer optional floodlight
versions of this light that have 35 degree optics to produce a wider beam spread and more light over a larger area nearer the fixture. These LED
light bars are IP68 rated and waterproof to 3 feet, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most
demanding environments, conditions and applications. The entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and
feature heavier housings, rubber isolated mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations,
impacts, waves, hard rains, sand and high winds.
LEDLB-20ET-IR 35В° Flood Beam
(Opt)
LEDLB-20ET-IR 10В° Spot Beam
(Stnd)
11/18/2014
Page: 294
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Edison EdixeonВ® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels
across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as
a result. This multi-voltage capability makes these units ideal for mobile and stand alone applications such as those found on boats, heavy
equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are
impractical.
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of
environmental and operating conditions. The LED lights with the �E’ part number designation are designed for extreme durability and are larger
and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85
degrees Celsius, are waterproof to three feet and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum
and the lenses are unbreakable polycarbonate. The EdixeonВ® LEDs offer inherent LED resistance to shocks and vibrations contributing to these
units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates,
very cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme
and stored in another temperature extreme.
Click here to view an article on the Generations of Night Vision and Infrared.
Adjustable Mounting: The trunnion mounting design on the LEDLB-20ET-IR allows for post-installation angle positioning. This means that by
loosening 2 thumb bolts located on either side of the light, the operator can adjust the positioning angle of this light 270 degrees. Then he/she
would simply have to tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle. We also offer a BC-2 bar clamp
mounting system you can view here for even greater mounting versatility.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as
part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
11/18/2014
Page: 295
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-20ET-IR LED Light Bar
LEDLB LED Features
LEDs: 20 EdixeonВ® 3 Watt IR LED Emitters
EdixeonВ® 3 Watt IR LED Emitters
Dimensions: 12"-L 3"-H 3.57"-D
LEDs Driven At 80%
Watts: 60
-40 C~ +80C Operating Temp Range
Voltage: 9-42 VDC
Spot Beam: 800'L x 80'W
RoHS Compliant
Flood Beam: 250'L x 250'W
Weight: 6.4 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
LED Chip Op Temp -40C to +110C
Mounting: Trunnion Bracket
IP68 Rated Waterproof to 3ft
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps: 5 (on 12 volts) 2.5 (on 24 volts)
Lumens: 3600
Special Orders- Requirements
Wavelength: 750Nm, 850Nm or 940Nm
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
CE Certified
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
Links (Click on the below items to view):
- SpecSheet French
- SpecSheet Arabic
- Dimensional Drawing
- Manual
11/18/2014
Page: 296
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
40 Watt High Intensity LED Light - 4 LEDs - 3,680 Lumens - Degreed Aiming - PWM Dimming
Part #: LEDP10WSA-40
Price: $612.00
11/18/2014
Page: 297
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The LEDP10WSA-40 LED Light offers high output from a compact form factor and is ideal for use in mining applications as well as
heavy equipment, hunting, boating, vehicle, military, law enforcement and industrial manufacturing uses. A 3,680 lumen output, 50,000
hour service life and 12-24 volt compatibility provides operators with a rugged and powerful LED alternative to 300 watt halogen lamps
that uses little power and can withstand rugged use and abusive mining conditions.
The LEDP10WSA-40 high output LED light from Larson Electronics produces 3,680 lumens of high intensity light while drawing only 40 watts
@3.34 amps from a 12 volt electrical system. Four CREE XM-L2В® ten watt LEDs producing 920 lumens each are arranged in rows and paired
with high purity optics to produce a well focused 10В° spot beam that is ideal for providing far reaching concentrated illumination while still
covering a substantial amount of area. We also offer optional floodlight versions with a 40В° or 60В° beam spread to provide more light over a larger
area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. These LED light bars are waterproof to 3 meters,
sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding environments, conditions and
applications.
LEDP10WSA-40 lights are ideal replacements for fragile and hot running 300 watt halogen lamps. They offer soft start technology, a small
profile, low power requirements, high durability and a shock dampening mounting system that makes these LED light emitters a superior lighting
solution for rough applications where power and reliability is critical. The heavy duty design and high power of these LED lights also makes them
suitable for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning, mining, security and law
enforcement, boating, vehicles and commercial structure illumination.
11/18/2014
Page: 298
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to tap into a provided input wire
with an external pulse generator and adjust the duty cycle of the current being applied to the LEDs. Thus you can connect an external dimmer,
switch or pulse control and adjust the perceived output of the light, effectively causing the light to flash, dim or brighten to the desired levels.
Additionally, this method of controlling light output results in a corresponding drop in amperage draw, so if the duty cycle is cut back to 50% there
will be a matching 50% reduction in amperage draw. These units are also able to monitor and adjust input current to maintain the correct LED
voltage levels regardless of input levels across a specific range. These LEDP10W series light bars can operate on current ranging from 9 to
46VDC without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage
spikes and drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of
light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on
or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
Voltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels
regardless of input levels across a specific range. These LEDP10WSA series light bars can operate on current ranging from 11 to 65 VDC
without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and
drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it.
Durability: As well as unparalleled heat control, the LEDP10WSA series of LED lights from Larson Electronics also offer IP69K rated
construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature
changes of -40В°C to +80В°C, are waterproof to three meters, can withstand high pressure and high temperature wash downs, and resist ingress of
dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XM-L2В®
LEDs help these units achieve up to 60Grms rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use.
We recommend these LED lights for use in applications that require regular intensive cleaning and are exposed to a lot of vibration, dust,
dirt, and abusive working conditions are encountered.
Mounting: Each unit is equipped with an innovative trunnion style mounting bracket that allows the light to be attached to flat surfaces and
adjusted through 360 degrees of vertical movement. The LED light head is secured to the mounting bracket with shock dampening rotating
inserts. The insert provides precision aiming down to 1В° while providing increased longevity to the LED fixture. To vertically adjust the unit after
mounting, the user simply loosens the screws located on either side of the unit, moves it into the desired position, then retightens the screws.
The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and slide the unit
for precise mount positioning. The stainless steel trunnion bracket has preset angles marked in 5В° intervals, allowing operators to precisely aim
each fixture.
Note: The LEDP10WSA series feature gold plated DT connectors to provide better conductivity. Most Larson Electronics LEDP5W-30, LEDLB,
LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The
mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending
on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating,
IR/Visible combos) will have different Deutsch connectors.
Applications for the LEDP10WSA include but are not limited to mining, dump trucks, construction machinery, cement mixers, and car washes.
11/18/2014
Page: 299
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDP10WSA-40 Dimmable High Output LED Light
LEDP10WSA-40 Series Features
Lamp Type: CREE XL-L2В® LED
Automatic Current Sensing and Adjusting
Dimensions: 5.02"-L 5.20"-H 3.98"-D
Active Heat Management
Watts: 40
Ambient Op Temp -40В°C to +80В°C
Led Drive %: 90%
IP69K High Temp High Pressure Wash Down
Voltage: Universal Voltage 11-65V DC
EMC/EMI CISPR 25 Class 3 Rated
Beam Spread: 10В° Spot, 40В° Flood, 60В° Flood, 30В°/60В° Elliptical
304 Stainless Steel Mounting Hardware
Mounting: Flat Surface 304 SS Bracket - 360 Degree Adjustable
Shock Dampening Mounting System
Wiring: Gold Plated Deutsch IPD / LADD DT04-2P connector
PWM Dimming via Control Wire
Amps: 3.34 (on 12 volts) - 1.67 (on 24 volts)
Lumens: 3,680
LED Light Color: White
LED Life Expectancy: 50,000 hours
Dimmable: Yes - Dimmable via PWM Control Wire
Special Orders- Requirements
Optics Efficiency: 90%
Contact us for special requirements
Materials: Aluminum Housing, Polycarbonate Lens
Toll Free: 1-800-369-6671
Housing Colors: Black
Intl: 1-903-498-3363
Weight: 4.85 Lbs
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 300
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
40 Watt High Intensity LED Light - 4 LEDs - 3,680 Lumens - Degreed Aiming - Voltage Dimming
Part #: LED-VD-10WSA-40
Price: $612.00
11/18/2014
Page: 301
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The LED-VD-10WSA-40 LED Light offers high output from a compact form factor and is ideal for use in mining applications as well as
heavy equipment, hunting, boating, vehicle, military, law enforcement and industrial manufacturing uses. A 3,680 lumen output, 50,000
hour service life and 12-24 volt compatibility provides operators with a rugged and powerful LED alternative to 300 watt halogen lamps
that uses little power and can withstand rugged use and abusive mining conditions.
The LED-VD-10WSA-40 high output LED light from Larson Electronics produces 3,680 lumens of high intensity light while drawing only 40 watts
@3.34 amps from a 12 volt electrical system. Four CREE XM-L2В® ten watt LEDs producing 920 lumens each are arranged in rows and paired
with high purity optics to produce a well focused 10В° spot beam that is ideal for providing far reaching concentrated illumination while still
covering a substantial amount of area. We also offer optional floodlight versions with a 40В° or 60В° beam spread to provide more light over a larger
area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. These LED light bars are waterproof to 3 meters,
sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding environments, conditions and
applications.
LED-VD-10WSA-40 lights are ideal replacements for fragile and hot running 300 watt halogen lamps. They offer soft start technology, a small
profile, low power requirements, high durability and a shock dampening mounting system that makes these LED light emitters a superior lighting
solution for rough applications where power and reliability is critical. The heavy duty design and high power of these LED lights also makes them
suitable for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning, mining, security and law
enforcement, boating, vehicles and commercial structure illumination.
Dimming: The LED-VD-10WSA series of LED lights are dimmable via buck and boost style dimmers, such as our LED-PWM-6. These type of
dimmers are designed to work inline and allows operators to increase or decrease the brightness of lights.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of
light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on
or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
Voltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels
regardless of input levels across a specific range. These LED-VD-10WSA series light bars can operate on current ranging from 11 to 65 VDC
without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and
drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it.
Durability: As well as unparalleled heat control, the LED-VD-10WSA series of LED lights from Larson Electronics also offer IP69K rated
construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature
changes of -40В°C to +80В°C, are waterproof to three meters, can withstand high pressure and high temperature wash downs, and resist ingress of
dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XM-L2В®
LEDs help these units achieve up to 60Grms rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use.
We recommend these LED lights for use in applications that require regular intensive cleaning and are exposed to a lot of vibration, dust,
dirt, and abusive working conditions are encountered.
Mounting: Each unit is equipped with an innovative trunnion style mounting bracket that allows the light to be attached to flat surfaces and
adjusted through 360 degrees of vertical movement. The LED light head is secured to the mounting bracket with shock dampening rotating
inserts. The insert provides precision aiming down to 1В° while providing increased longevity to the LED fixture. To vertically adjust the unit after
mounting, the user simply loosens the screws located on either side of the unit, moves it into the desired position, then retightens the screws.
The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and slide the unit
for precise mount positioning. The stainless steel trunnion bracket has preset angles marked in 5В° intervals, allowing operators to precisely aim
each fixture.
Note: The LED-VD-10WSA series feature gold plated DT connectors to provide better conductivity. Most Larson Electronics LEDP5W-30,
LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector.
The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail,
depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam,
modulating, IR/Visible combos) will have different Deutsch connectors.
Applications for the LED-VD-10WSA include but are not limited to mining, dump trucks, construction machinery, cement mixers, and car washes.
11/18/2014
Page: 302
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LED-VD-10WSA-40 Dimmable High Output LED Light
LED-VD-10WSA-40 Series Features
Lamp Type: CREE XL-L2В® LED
Automatic Current Sensing and Adjusting
Dimensions: 5.02"-L 5.20"-H 3.98"-D
Active Heat Management
Watts: 40
Ambient Op Temp -40В°C to +80В°C
Led Drive %: 90%
IP69K High Temp High Pressure Wash Down
Voltage: Universal Voltage 11-65V DC
EMC/EMI CISPR 25 Class 3 Rated
Beam Spread: 10В° Spot, 40В° Flood, 60В° Flood, 30В°/60В° Elliptical
304 Stainless Steel Mounting Hardware
Mounting: Flat Surface 304 SS Bracket - 360 Degree Adjustable
Shock Dampening Mounting System
Wiring: Gold Plated Deutsch IPD / LADD DT04-2P connector
PWM Dimming via Control Wire
Amps: 3.34 (on 12 volts) - 1.67 (on 24 volts)
Lumens: 3,680
LED Light Color: White
LED Life Expectancy: 50,000 hours
Dimmable: Yes - Dimmable via voltage
Special Orders- Requirements
Optics Efficiency: 90%
Contact us for special requirements
Materials: Aluminum Housing, Polycarbonate Lens
Toll Free: 1-800-369-6671
Housing Colors: Black
Intl: 1-903-498-3363
Weight: 4.85 Lbs
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 303
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Compact 7 Watt LED Fixture for Hazardous Area Location Lighting - Aluminum Housing - 12-24VDC - C1D2
Part #: CANLED-C1D2
Price: $595.20
11/18/2014
Page: 304
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The Larson Electronics CANLED-C1D2 is a low voltage hazardous area lighting solution approved for Class 1 Division 2 Environments
and 1598 compliant for use in wet locations. This powerful LED light produces 587 lumens, operates from 12 or 24 VDC, and is
available in a variety of configurations to allow tailoring to the specific requirements of various applications.
The CANLED-C1D2 is designed to provide a high output and ruggedly durable lighting solution for applications where Class1 Division 2
compliance is required. This low voltage explosion proof light can be operated with either 12 or 24 volt DC current and includes 6 feet of
connecting lead with standard two wire configuration. This light is constructed of precision machined aluminum for excellent strength and
durability and is rated IP66 for ingress protection against dust and direct exposure to high pressure water spray.
The CANLED-C1D2 is available in a 30 degree spotlight beam configuration for distance and a 100 degree configuration for wide area
illumination, and a cool white color temperature for maximum illumination. The high output, cool running operation, and good color rendering
properties of this light make it an ideal replacement for older, bulkier, and less reliable incandescent and halogen lamps.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Click Photo to Enlarge
Page: 305
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Durability: The CANLED-C1D2 hazardous location LED light is constructed of machined aluminum for high strength and durability with a clear
anodized finish for increased corrosion resistance. The housing is IP66 rated, providing protection against intrusion into the housing from dusts,
dirt, oils and water directly sprayed on the housing at high pressure. This LED light is equipped with an impact resistant acrlyic lens for increased
safety compared to glass lenses. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness
or dusty conditions are commonly encountered.
High Output LEDs: The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme
long life. These Cree LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 100,000 hours, giving them better
efficiency and operational life than comparable LEDs. These lights are equipped with high purity optics and available in a 30 degree spotlight
configuration for long beam length or 100 degree flood configuration for wide area coverage. Utilizing an acrylic lens, this fixture produces a
higher light output than similar fixtures equipped with thicker glass lenses. The CANLED-C1D2 has multiple color temperature options and is
offered in 6500K cool white with a color rendering of 75, 4300K neutral white with a color rendering of 75, and 3500K warm white with a color
rendering of 80.
Mounting: Mounting for this unit is provided by an included aluminum yoke that allows vertical adjustment of the light once installed. The
mounting yoke is predrilled with two Вј inch holes spaced 1-1/2 inches apart for easy and secure mounting to flat surfaces. The entire assembly
weighs 2.3 lbs and measures only 3.47 inches in diameter and approximately 4-1/2 inches deep, making it ideal for mounting in areas where
space is limited and a heavy fixture cannot be installed due to lack of support.
Wiring/Power: These hazardous location LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting
configuration. These lights operate from 12 or 24 volt DC current at 7.9 watts 0.66 amps on 12 VDC and 8.4 Watts 0.35 amps on 24 VDC.
Versatility: The CANLED-C1D2 is ETL approved for Class 1 Division 2 groups A, B, C, and D locations. This unit carries an IP66 waterproof
rating ensuring protection against ingress from dusts, dirt, oils and water sprayed at high pressure directly on the fixture. This light is ideal for
indoor or outdoor applications, food processing, and industrial operations with hazardous location classification where dusty or wet conditions are
commonly encountered.
11/18/2014
Page: 306
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
CANLED-C1D2 Hazardous Location LED Light
ETL Listed
Lamp Type: LED
Class 1 Division 2 Groups A,B,C,D
Lamp Dimensions (w/o Bracket): 3.47" Diam" x 4.44"-Depth
CSA 22.2 No. 250.0
Lamp Dimensions (w/ Bracket): 4.87"-H x 4.22" W
UL 1598
Weight: 2.3 lb | 1.04 k g
IP66 Ingress Protection
Watts: 7.9 W @ 12 VDC | 8.4 W @ 24 VDC
T3 Temperature Rating
Voltage: 12-28 VDC
LM-80 > 60,500 hrs (based on Cree long term tests)
Lumens: Spot: 587 - Flood: 459
Lamp Life Expectancy: 100,000 Hours
CRI: CW: 75, NW: 75, WW: 80
Amps: 0.66 A @12 VDC | 0.35 A @ 24 VDC
Light Color: CW: 6500K, NW: 4300K, WW: 3500K
Beam Type: 30В° Spot or 100В° Flood
Mounting: 1/4” - 20 Screws /Aluminum Yoke
Materials: Machined aluminum housing - acrylic lens
Special Orders- Requirements
Housing Finish: Clear anodized finish
Contact us for special requirements
Temp Range: -40В°C to +85В°C
Toll Free: 1-800-369-6671
Typical Case Temperature: ~20В°C above ambient temperature
Intl: 1-903-498-3363
Wiring: 6Ft Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 307
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 308
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Compact 7 Watt LED Fixture for Hazardous Area Location Lighting - Aluminum Housing - 12-24VDC - C1D2
Part #: HAL-7W-LED
Price: $595.20
11/18/2014
Page: 309
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The Larson Electronics HAL-7W-LED is a low voltage hazardous area lighting solution approved for Class 1 Division 2 Environments
and 1598 compliant for use in wet locations. This powerful LED light produces 587 lumens, operates from 12 or 24 VDC, and is
available in a variety of configurations to allow tailoring to the specific requirements of various applications.
The HAL-7W-LED is designed to provide a high output and ruggedly durable lighting solution for applications where Class1 Division 2
compliance is required. This low voltage explosion proof light can be operated with either 12 or 24 volt DC current and includes 6 feet of
connecting lead with standard two wire configuration. This light is constructed of precision machined aluminum for excellent strength and
durability and is rated IP66 for ingress protection against dust and direct exposure to high pressure water spray.
The HAL-7W-LED is available in a 30 degree spotlight beam configuration for distance and a 100 degree configuration for wide area illumination,
and a cool white color temperature for maximum illumination. The high output, cool running operation, and good color rendering properties of this
light make it an ideal replacement for older, bulkier, and less reliable incandescent and halogen lamps.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Click Photo to Enlarge
Page: 310
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Durability: The HAL-7W-LED hazardous location LED light is constructed of machined aluminum for high strength and durability with a clear
anodized finish for increased corrosion resistance. The housing is IP66 rated, providing protection against intrusion into the housing from dusts,
dirt, oils and water directly sprayed on the housing at high pressure. This LED light is equipped with an impact resistant acrlyic lens for increased
safety compared to glass lenses. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness
or dusty conditions are commonly encountered.
High Output LEDs: The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme
long life. These Cree LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 100,000 hours, giving them better
efficiency and operational life than comparable LEDs. These lights are equipped with high purity optics and available in a 30 degree spotlight
configuration for long beam length or 100 degree flood configuration for wide area coverage. Utilizing an acrylic lens, this fixture produces a
higher light output than similar fixtures equipped with thicker glass lenses. The HAL-7W-LED has multiple color temperature options and is
offered in 6500K cool white with a color rendering of 75, 4300K neutral white with a color rendering of 75, and 3500K warm white with a color
rendering of 80.
Mounting: Mounting for this unit is provided by an included aluminum yoke that allows vertical adjustment of the light once installed. The
mounting yoke is predrilled with two Вј inch holes spaced 1-1/2 inches apart for easy and secure mounting to flat surfaces. The entire assembly
weighs 2.3 lbs and measures only 3.47 inches in diameter and approximately 4-1/2 inches deep, making it ideal for mounting in areas where
space is limited and a heavy fixture cannot be installed due to lack of support.
Wiring/Power: These hazardous location LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting
configuration. These lights operate from 12 or 24 volt DC current at 7.9 watts 0.66 amps on 12 VDC and 8.4 Watts 0.35 amps on 24 VDC.
Versatility: The HAL-7W-LED is ETL approved for Class 1 Division 2 groups A, B, C, and D locations. This unit carries an IP66 waterproof rating
ensuring protection against ingress from dusts, dirt, oils and water sprayed at high pressure directly on the fixture. This light is ideal for indoor or
outdoor applications, food processing, and industrial operations with hazardous location classification where dusty or wet conditions are
commonly encountered.
11/18/2014
Page: 311
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
HAL-7W-LED Hazardous Location LED Light
ETL Listed
Lamp Type: LED
Class 1 Division 2 Groups A,B,C,D
Lamp Dimensions (w/o Bracket): 3.47" Diam" x 4.44"-Depth
CSA 22.2 No. 250.0
Lamp Dimensions (w/ Bracket): 4.87"-H x 4.22" W
UL 1598
Weight: 2.3 lb | 1.04 k g
IP66 Ingress Protection
Watts: 7.9 W @ 12 VDC | 8.4 W @ 24 VDC
T3 Temperature Rating
Voltage: 12-28 VDC
LM-80 > 60,500 hrs (based on Cree long term tests)
Lumens: Spot: 587 - Flood: 459
Lamp Life Expectancy: 100,000 Hours
CRI: CW: 75, NW: 75, WW: 80
Amps: 0.66 A @12 VDC | 0.35 A @ 24 VDC
Light Color: CW: 6500K, NW: 4300K, WW: 3500K
Beam Type: 30В° Spot or 100В° Flood
Mounting: 1/4” - 20 Screws /Aluminum Yoke
Materials: Machined aluminum housing - acrylic lens
Special Orders- Requirements
Housing Finish: Clear anodized finish
Contact us for special requirements
Temp Range: -40В°C to +85В°C
Toll Free: 1-800-369-6671
Typical Case Temperature: ~20В°C above ambient temperature
Intl: 1-903-498-3363
Wiring: 6Ft Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 312
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
11/18/2014
Page: 313
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Manual
11/18/2014
Page: 314
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
16 Watts LED Strip Light for Hazardous Location Lighting - 24" Surface Mount Bar - Class 1 Div 2
Part #: HAL-24-16W-LED
Price: $583.20
Buy American Compliant
The Larson Electronics HAL-24-16W-LED is a low voltage explosion proof lighting solution approved for Class 1 Division 2
environments and ETL 1598 compliant for use in wet locations. This powerful 24.9" long LED strip light produces 1208 lumens,
operates from 12 or 24 VDC, and is suitable for a variety of applications.
The HAL-24-16W-LED is designed to provide a high output and ruggedly durable hazardous area lighting solution for applications where Class 1
Division 2 compliance is required. This low voltage explosion proof light can be operated with either 12 or 24 volt DC current (choose below) and
includes 6 feet of connecting lead with standard two wire configuration. This light is constructed of powder coated extruded aluminum for
excellent strength and durability and is rated IP54 for protection against exposure to splashing water and limited dust ingress. These units are
configured in a 24.9" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool
running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable HID and
halogen light fixtures.
Durability/Mounting: The HAL-24-16W-LED hazardous location LED light is constructed of extruded aluminum with a tough powder coat finish
for high strength and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and basic protection against
splashing water such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or
dusty conditions are commonly encountered.
The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree
LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life
than comparable LEDs.
Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust
the light 170В° vertically for the best placement. The entire assembly weighs 1.4 lbs and measures 24.9 inches in length, and 2.68 inches wide
and 1.69 inces deep, making it ideal for mounting in areas where space is limited and a low profile fixture more readily installed.
Wiring/Power: These hazardous area LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting
configuration. These lights are not multi-voltage; each light is preconfigured for 12 or 24 volt DC current at 16.8 watts 1.3 amps on 12 VDC and
.66 amps on 24 VDC.
Versatility: The HAL-24-16W-LED is ETL approved for Class 1 Division 2 groups A,B,C and D locations. This unit carries an IP54 water resistant
rating ensuring protection against limited ingress from dusts, dirt, and basic protection against light water spray landing directly on the fixture.
This light is ideal for indoor or outdoor applications and industrial operations with hazardous location classification where dusty or wet conditions
are commonly encountered.
11/18/2014
Page: 315
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
HAL-24-16W-LED Hazardous Locaion LED Lighting
ETL Listed
Lamp Type: LED
Class 1 Division 2 Groups A,B,C,D
Dimensions: Lamp 24.90"-L 2.68" -W 1.69"- D
CSA 22.2 No. 250.0
Weight: 1.4lb | 0.6 k g
1598
Watts: 16.8
IP54 Ingress Protection
Voltage: 12 or 24 VDC
T3 Temperature Rating
Lumens: 1208
Lamp Life Expectancy: 100,000 Hours
CRI: 75
Amps: 1.3 A @12 VDC | 0.66 A @ 24 VDC
Light Color: 6500K
Special Orders- Requirements
Beam Type: 100В° Flood or 30В° Spot
Contact us for special requirements
Mounting: Standard Triangle End Brackets
Toll Free: 1-800-369-6671
Temp Range: -40°C – +85°C
Intl: 1-903-498-3363
Wiring: 6Ft Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 316
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- STEP
- DXF
11/18/2014
Page: 317
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
16 Watt White LED Strip Light for Hazardous Location Lighting - 24" Surface Mount Bar - C1D2
Part #: HAL-24-16W-LED-WHT
Price: $583.20
Buy American Compliant
The Larson Electronics HAL-24-16W-LED-WHT is a low voltage explosion proof lighting solution approved for Class 1 Division 2
environments and ETL 1598 compliant for use in wet locations. This powerful 24.9" long LED strip light produces 1208 lumens,
operates from 12 or 24 VDC, and is suitable for a variety of applications.
The HAL-24-16W-LED-WHT is designed to provide a high output and ruggedly durable hazardous area lighting solution for applications where
Class 1 Division 2 compliance is required. This low voltage explosion proof light can be operated with either 12 or 24 volt DC current (choose
below) and includes 6 feet of connecting lead with standard two wire configuration. This light is constructed of white powder coated extruded
aluminum housing for excellent strength and durability and is rated IP54 for protection against exposure to splashing water and limited dust
ingress. These units are configured in a 24.9" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is
preferred. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older,
bulkier, and less reliable HID and halogen light fixtures.
Durability/Mounting: The HAL-24-16W-LED-WHT hazardous location LED light is constructed of extruded aluminum with a tough white powder
coat finish for high strength and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and basic protection
against splashing water such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where
wetness or dusty conditions are commonly encountered.
The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree
LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life
than comparable LEDs.
Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust
the light 170В° vertically for the best placement. The entire assembly weighs 1.4 lbs and measures 24.9 inches in length, and 2.68 inches wide
and 1.69 inces deep, making it ideal for mounting in areas where space is limited and a low profile fixture more readily installed.
Wiring/Power: These hazardous area LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting
configuration. These lights are not multi-voltage; each light is preconfigured for 12 or 24 volt DC current at 16.8 watts 1.3 amps on 12 VDC and
.66 amps on 24 VDC.
Versatility: The HAL-24-16W-LEDWHT is ETL approved for Class 1 Division 2 groups A,B,C and D locations. This unit carries an IP54 water
resistant rating ensuring protection against limited ingress from dusts, dirt, and basic protection against light water spray landing directly on the
fixture. This light is ideal for indoor or outdoor applications and industrial operations with hazardous location classification where dusty or wet
conditions are commonly encountered.
11/18/2014
Page: 318
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
HAL-24-16W-LED-WHT Hazardous Locaion LED Lighting
ETL Listed
Lamp Type: LED
Class 1 Division 2 Groups A,B,C,D
Dimensions: Lamp 24.90"-L 2.68" -W 1.69"- D
CSA 22.2 No. 250.0
Weight: 1.4lb | 0.6 k g
UL 1598
Watts: 16.8
IP54 Ingress Protection
Voltage: 12 or 24 VDC
T3 Temperature Rating
Lumens: 1208
Lamp Life Expectancy: 100,000 Hours
CRI: CW: 75, NW: 75, WW: 80
Amps: 1.3 A @12 VDC | 0.66 A @ 24 VDC
Light Color: CW: 6500K, NW: 4300K, WW: 3500K
Special Orders- Requirements
Beam Type: 100В° Flood or 30В° Spot
Contact us for special requirements
Lens: Clear or Frosted
Toll Free: 1-800-369-6671
Mounting: Standard Triangle End Brackets
Intl: 1-903-498-3363
Temp Range: -40°C – +85°C
E-mail: [email protected]
Wiring: 6Ft Lead | White: + Black: 3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
Links (Click on the below items to view):
- Dimensional Drawing
11/18/2014
Page: 319
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Hi-Res Image 1
11/18/2014
Page: 320
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
16 Watts LED Strip Light for Hazardous Location Lighting - 24" Surface Mount Bar - Class 1 Division
Part #: GSLEDIP24-C1D2
Price: $583.20
Buy American Compliant
The Larson Electronics GSLEDIP24 is a low voltage explosion proof lighting solution approved for Class 1 Division 2 environments
and ETL 1598 compliant for use in wet locations. This powerful 24.9" long LED strip light produces 1208 lumens, operates from 12 or
24 VDC, and is suitable for a variety of applications.
The GSLEDIP24 is designed to provide a high output and ruggedly durable hazardous area lighting solution for applications where Class 1
Division 2 compliance is required. This low voltage explosion proof light can be operated with either 12 or 24 volt DC current (choose below) and
includes 6 feet of connecting lead with standard two wire configuration. This light is constructed of powder coated extruded aluminum for
excellent strength and durability and is rated IP54 for protection against exposure to splashing water and limited dust ingress. These units are
configured in a 24.9" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool
running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable HID and
halogen light fixtures.
Durability/Mounting: The GSLEDIP24 hazardous location LED light is constructed of extruded aluminum with a tough powder coat finish for
high strength and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and basic protection against splashing
water such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty
conditions are commonly encountered.
The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree
LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life
than comparable LEDs.
Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust
the light 170В° vertically for the best placement. The entire assembly weighs 1.4 lbs and measures 24.9 inches in length, and 2.68 inches wide
and 1.69 inces deep, making it ideal for mounting in areas where space is limited and a low profile fixture more readily installed.
Wiring/Power: These hazardous area LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting
configuration. These lights are not multi-voltage; each light is preconfigured for 12 or 24 volt DC current at 16.8 watts 1.3 amps on 12 VDC and
.66 amps on 24 VDC.
Versatility: The GSLEDIP24 is ETL approved for Class 1 Division 2 groups A,B,C and D locations. This unit carries an IP54 water resistant
rating ensuring protection against limited ingress from dusts, dirt, and basic protection against light water spray landing directly on the fixture.
This light is ideal for indoor or outdoor applications and industrial operations with hazardous location classification where dusty or wet conditions
are commonly encountered.
11/18/2014
Page: 321
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
GSLEDIP24 Hazardous Locaion LED Lighting
ETL Listed
Lamp Type: LED
Class 1 Division 2 Groups A,B,C,D
Dimensions: Lamp 24.90"-L 2.68" -W 1.69"- D
CSA 22.2 No. 250.0
Weight: 1.4lb | 0.6 k g
1598
Watts: 16.8
IP54 Ingress Protection
Voltage: 12 or 24 VDC
T3 Temperature Rating
Lumens: 1208
Lamp Life Expectancy: 100,000 Hours
CRI: 75
Amps: 1.3 A @12 VDC | 0.66 A @ 24 VDC
Light Color: 6500K
Special Orders- Requirements
Beam Type: 100В° Flood or 30В° Spot
Contact us for special requirements
Mounting: Standard Triangle End Brackets
Toll Free: 1-800-369-6671
Temp Range: -40°C – +85°C
Intl: 1-903-498-3363
Wiring: 6Ft Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 322
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Magnetic LED Light Bar on Trunnion Mount - 2 Inch Double Ball Joint Mount - 12 LEDs - 200lb Grip Ma
Part #: LEDLB-12ET-DBM-I
Price: $572.00
Buy American Compliant
The Larson Electronics LEDLB-12ET-DBM-I LED Light Bar offers high light output and extreme durability
combined with a versatile trunnion and double ball joint mount with magnetic base. The magnetic base provides
200 lbs of magnetic grip while a double ball joint and trunnion mount provides the operator with the ability to
adjust the unit to a wide variety of positions while mounted. This LED light emitter bar light runs on 110VAC
provided by an included inline power transformer.
The LEDLB-12ET-DBM-I LED light bar from Larson Electronics produces a 550' long by 70' wide light beam with 2,160
lumens of bright light. Twelve Edison EdixeonВ® Emitters containing CREE EZBrightВ® three watt LEDs producing 180
lumens each are arranged in rows and paired with high purity 10 degree optics to produce a tightly focused spot beam with
limited spread or light spillage. We also offer optional floodlight versions with 35 degree optics to produce a wider beam
spread and more light over a larger area nearer the fixture, making flood versions ideal for use as work and area lights.
These LED light bars are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt, and very
ruggedly constructed to withstand the most demanding environments, conditions, and applications. The entire Larson
Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier housings, rubber isolated mounts
and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains, sand
and high winds.
This LED light emitter bar light is designed to run directly off of any voltage ranging from 9 Volts to 42 Volts. However, with
our new integrated inline transformer design, the fixture can now be operated with standard 110 VAC power found in
common wall outlets. Essentially, this means the operator can use this LED light bar anywhere a wall plug in is available or,
by disconnecting the step down transformer, he/she can power this LED light emitter bar from any vehicle, equipment, ATV
or boat electrical system.
You do not need to anything special to operate these light bars in their multi-voltage 9-42 Volt configuration. They will
sense the incoming voltage and adapt accordingly. If operator decides he/she would like to run off 9 - 42 VDC, all he/she
has to do is disconnect from said transformer.
11/18/2014
Page: 323
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This image shows a dark street, illuminated by nothing but distant street
lamps and suburban lighting.
The same street illuminated with the LEDLB-12ET-DBM-I, the beam easily
reaches the street light over 500' away.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 324
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many
manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an
extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to
produce the maximum amount of power and longevity from the integrated Edison EdixeonВ® Emitters. The end result is
more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels
regardless of input levels across a specific range. These LEDLB series light bars can operate on current ranging from 9 to
42VDC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and
stand alone applications such as those found on commercial boats, heavy equipment and vehicles where power systems
don’t always operate with 12 volts and external generators, transformers or inverters are impractical.
LEDLB-12ET-DBM-I 35В° Flood Beam
(Opt)
LEDLB-12ET-DBM-I 10В° Spot Beam
(Stnd)
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to
withstand extremes of environmental and operating conditions. The LED lights with the �E’ part number designation are
designed for extreme durability and are larger and heavier than the standard LEDLB series lights and are nearly twice as
heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85
degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity.
The housings are formed from thick extruded aluminum and the lenses are unbreakable polycarbonate. The EdixeonВ®
LEDs offer inherent LED resistance to shocks and vibrations contributing to these units 15.6Grms rating of vibration
tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates, very cold
areas and rough saltwater conditions. They are also well suited to environments where equipment is used in one
temperature extreme and stored in another temperature extreme.
Adjustable Mounting: A magnetic base with a 200 lb grip temporarily secures this unit to various metallic surfaces while a
double ball joint mount allows 360 degrees of rotation and 140 degrees of tilt. To adjust this LED unit simply loosen the
thumb bolt located on the side of unit, position the light head as desired, then retighten the thumb screw. The light head can
be further adjusted by loosening the thumb screws on either side of the light head and moving the light head through 270
degrees of vertical tilt. This mounting system will hold the unit securely in place, even under rough working or driving
conditions, and provides an extreme level of placement versatility.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are
terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and
LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED
lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible
combos) will have different Deutsch connectors.
11/18/2014
Page: 325
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-12ET-DBM-I LED Light Bar
LEDLB LED Features
LEDs: 12 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 8.25"-L 3"-H 3.56"-D
LEDs Driven At 80%
Watts: 36
-40 C~ +80C Operating Temp Range
Voltage: 120/277VAC 50/60hz with Transformer- 9-42 VDC Without
Transformer
RoHS Compliant
Weight: 4.6 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
LED Chip Op Temp -40C to +125C
Mounting: Trunnion with Double Ball Joint and Magnetic Base
IP68 Rated Waterproof to 3 meters
Wiring: 20 feet of SOOW Cable terminating in standard 120 Volt Plug
Amps: .3 on 120V
Lumens: 2160
Special Orders- Requirements
LED Light Color: 6000K or 3000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Lux-Spot : @Lens: 192,900 @ 1 Meter 17,000
Lux-Flood : @Lens: 186,500 @ 1 Meter 1,930
CE Certified
3 year warranty replacement on this LED light. After 30 days, the customer
ships the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement.
Scroll Down to Purchase-
11/18/2014
Page: 326
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 327
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Manual
11/18/2014
Page: 328
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Bar Clamp Mount LED Spotlight - 4, 3, Watt LEDs - 10 inch Shaft
Part #: BCML-LED-12T
Price: $566.00
The Larson Electronics BCML-LED-12T Bar Clamp Mount Spotlight offers high light output in a durable, low profile housing. This light
produces a very tight spot pattern, can run on any voltage from 9 to 32 volts and provides a rugged lighting solution ideal for use in
marine environments, industrial and commercial applications, machine vision system lighting, heavy equipment illumination, vehicle
lighting and law enforcement.
The BCML-LED-12T LED bar clamp mount spotlight from Larson Electronics produces a 375' long beam with 720 lumens of bright light while
drawing only 12 watts @ 1 amp from a 12 volt electrical system. Four Edison Edixeon Emitters containing CREE EZBright 3 Watt LEDs
producing 180 lumens each is combined with high purity optics to produce a 10 degree spread spot beam. This fixture is ideal for anyone who is
looking for a tight spot light that offers outstanding life hours of 50,000+.
These LED bar clamp mount spotlights are IP68 rated and waterproof to three meters, sealed against intrusion by dust and dirt and ruggedly
constructed to withstand demanding environments and applications. It is constructed of extruded aluminum and feature rubber isolated mounts
and unbreakable polycarbonate lenses to provide durability and resistance to vibrations, impacts, waves, hard rains, sand and high winds.
11/18/2014
Page: 329
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Edison EdixeonВ® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels
across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as
a result. This multi-voltage capability makes these units ideal for mobile and standalone applications such as those found on commercial boats,
heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are
impractical.
BCML-LED-12T 35В° Flood Beam
(Opt)
BCML-LED-12T 10В° Spot Beam
(Stnd)
Durability: The BCML-LED-12T offers IP68 rated construction that is designed to withstand tough environmental and operating conditions.
These units can operate in temperatures ranging from -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist
ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE
XLamp MC-E LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,000 hours of use.
Mounting: The BCML-LED-12T is mounted on the end of a 10" shaft. An aluminum bar clamp is also mounted to the shaft to simplify mounting.
These bar clamps are not adjustable. The top portion of the mount has a through hole that enables the operator to pass one of two 1/4 - 20 bolts
through it and secure that stud with a Nylock nut. The Nylock nut and bolt are provided with the bar clamp. Small machine screws secure the
bottom half of the clamp to the top portion. The installer simply affixes the light to the top portion and places the assembly on the rail or bar. The
bottom portion is positioned and secure with the machine screws, cinching the clamp tightly to the bar.
Operation: Operator controls rotation and elevation of spotlight outside of vehicle by twisting and turning a handle. The beam remains where the
operator places it until the handle is moved.
11/18/2014
Page: 330
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
BCML-LED-12T Spotlight
BCML-LED Features
LEDs: 4 Edixeon 3 Watt LED Emitters
IP68 Rated Waterproof to 3 meters
Dimensions: Light Head - 4"- L 3"-H 3.5"-D; 11 3/8-Total Length
LEDs Driven At 80%
Watts: 12
-40 C~ +125C Operating Temp Range
Voltage: 9-32 V DC
70% Lumen Retention @ 65,000 Hours
Spot Beam: 375' L x 70' W
Lighting Configuration: 10В° Spot
Mounting: Bar Clamp
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps: 1 (on 12 volts)
Lumens: 720
Special Orders- Requirements
LED Light Color: 6000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 331
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Hi-Res Image 1 - Profile view of the BCML-LED-12
- Hi-Res Image 2 - Downward Angle View of the Product
- Hi-Res Image 3 - Backside view of the Product
11/18/2014
Page: 332
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Hi-Res Image 4 - Front View of the LED Light Head
- Hi-Res Image 5 - Bottom view showing the Shaft
- Hi-Res Image 6 - Side View of the Shaft and LED Light
11/18/2014
Page: 333
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LED Machine light - 2, 150lbs. Magnetic Bases - 120'L x 100'W Beam - Runs off 110V
Part #: LEDLB-12ET-F-M-110V
Price: $565.00
Buy American Compliant
The Larson Electronics LEDLB-12ET-F-M-110V LED Light Bar offers high light output and extreme durability combined with a versatile
magnetic mounting system. This LED light emitter bar light runs on 110VAC provided by an included inline power transformer. The 110
VAC capability of this light provides an extremely rugged lighting solution that is ideal for use in industrial and manufacturing
applications such as machine vision system lighting, industrial machining illumination, blasting lighting and mining operations.
The LEDLB-12ET-F-M-110V LED light bar from Larson Electronics produces a 120' long by 100' wide light beam with 2160 lumens of bright
light. Twelve Edison EdixeonВ® Emitters containing CREE EZBrightВ® three watt LEDs producing 180 lumens each are arranged in rows and
paired with high purity 35 degree optics to produce a well distributed floodlight beam. We also offer optional spotlight versions with 10 degree
optics to produce a tighter beam, resulting in a beam reach of up to 500 feet with limited spread or light spillage. These LED light bars are IP68
rated and waterproof to 3 meters, sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding
environments, conditions and applications.
The entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier housings, rubber isolated mounts and
unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains, sand and high winds. This
magnetic base allows fast and easy setup of this light on vehicles and equipment and will hold the fixture in place at speeds up to 80 mph
provided the mount is properly affixed and secure.
This LED light emitter bar light is designed to run on any voltage ranging from 9 Volts to 42 Volts. However, with our new integrated inline
transformer design the fixture can now be operated with common 110 VAC power found in standard wall outlets. Essentially, this means the
operator can use this LED light bar anywhere a wall plug in is available or, by disconnecting the step down transformer, he/she can power this
LED light emitter bar from any vehicle, equipment, ATV or boat electrical system. You do not need to anything special to operate these light bars
in their multi-voltage 9-42 Volt configuration. They will sense the incoming voltage and adapt accordingly.
This unit is also shipped with 6' of additional SOOW cord, for a combined total length of 11' from the converter to the fixture. In this particular
light, a step down transformer converts the original 110 Volt current into 12 volts to accommodate the fixture. If operator decides he/she would
like to run off 9 - 42 VDC, all he/she has to do is disconnect from said transformer.
11/18/2014
Page: 334
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Edison EdixeonВ® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels
across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as
a result. This multi-voltage capability makes these units ideal for mobile and stand alone applications such as those found on commercial boats,
heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are
impractical.
LEDLB-12ET-F-M-110V 35В° Flood Beam
(Stnd)
LEDLB-12ET-F-M-110V 10В° Spot Beam
(Opt)
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of
environmental and operating conditions. The LED lights with the �E’ part number designation are designed for extreme durability and are larger
and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85
degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity.
The housings are formed from thick extruded aluminum and the lenses are unbreakable polycarbonate. The EdixeonВ® LEDs offer inherent LED
resistance to shocks and vibrations contributing to these units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high
stress - high vibratory conditions, high humidity climates, very cold areas and rough saltwater conditions. They are also well suited to
environments where equipment is used in one temperature extreme and stored in another temperature extreme.
Magnetic Mounting: The 2, 150 lbs magnet mounting design on the LEDLB-12ET-F-M-110V allows for easy fixture placement and removal.
Please note, the magnetic base on this unit increases the units' overall height.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as
part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
11/18/2014
Page: 335
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-12ET-F-M-110V LED Light Bar
LEDLB LED Features
LEDs: 12 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 4.25"-L 3"-H 3.56"-D
LEDs Driven At 80%
Watts: 36
-40 C~ +80C Operating Temp Range
Voltage: 110 with transformer- 9-42 VDC Without transformer
RoHS Compliant
Weight: 5.4 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
LED Chip Op Temp -40C to +125C
Mounting: 2, 150lbs. Magnetic Mounts
IP68 Waterproof to 3 Meters
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps: 3 (on 12 volts) 1.5 (on 24 volts)
Lumens: 2160
Special Orders- Requirements
LED Light Color: 6000K or 3000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
CE Certified
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 336
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- SpecSheet French
- SpecSheet Arabic
- Manual
11/18/2014
Page: 337
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
40 Watt High Intensity LED Light - 4 LEDs - 3,680 Lumens - Degreed Aiming - Soft Start LEDs
Part #: LED10WSA-40
Price: $562.62
11/18/2014
Page: 338
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The LED10WSA-40 LED Light offers high output from a compact form factor and is ideal for use in mining applications as well as
heavy equipment, hunting, boating, vehicle, military, law enforcement and industrial manufacturing uses. A 3,680 lumen output, 50,000
hour service life and 12-24 volt compatibility provides operators with a rugged and powerful LED alternative to 300 watt halogen lamps
that uses little power and can withstand rugged use and abusive mining conditions.
The LED10WSA-40 high output LED light from Larson Electronics produces 3,680 lumens of high intensity light while drawing only 40 watts
@3.34 amps from a 12 volt electrical system. Four CREE XM-L2В® ten watt LEDs producing 920 lumens each are arranged in rows and paired
with high purity optics to produce a well focused 10В° spot beam that is ideal for providing far reaching concentrated illumination while still
covering a substantial amount of area. We also offer optional floodlight versions with a 40В° or 60В° beam spread to provide more light over a larger
area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. These LED light bars are waterproof to 3 meters,
sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding environments, conditions and
applications.
LED10WSA-40 lights are ideal replacements for fragile and hot running 300 watt halogen lamps. They offer soft start technology, a small profile,
low power requirements, high durability and a shock dampening mounting system that makes these LED light emitters a superior lighting solution
for rough applications where power and reliability is critical. The heavy duty design and high power of these LED lights also makes them suitable
for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning, mining, security and law
enforcement, boating, vehicles and commercial structure illumination.
Protection: These high output LED light bars feature soft start technology, allowing the LEDs to gradually increase to maximum intensity
instead. Low in rush current at start-up reduces wear on associated components, increasing overall life of the internal electronics and improves
downtime. Built in redundancy lessens chance of full fixture failure, while the reverse polarity operation protects the fixture from shorting the
internal components.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of
light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on
or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
Voltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels
regardless of input levels across a specific range. These LED10WSA series light bars can operate on current ranging from 11 to 65 VDC without
any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops
that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it.
Durability: As well as unparalleled heat control, the LED10WSA series of LED lights from Larson Electronics also offer IP69K rated construction
that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40В°C
to +80В°C, are waterproof to three meters, can withstand high pressure and high temperature wash downs, and resist ingress of dust, dirt and
humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XM-L2В® LEDs help these
units achieve up to 60Grms rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend
these LED lights for use in applications that require regular intensive cleaning and are exposed to a lot of vibration, dust, dirt, and abusive
working conditions are encountered.
Mounting: Each unit is equipped with an innovative trunnion style mounting bracket that allows the light to be attached to flat surfaces and
adjusted through 360 degrees of vertical movement. The LED light head is secured to the mounting bracket with shock dampening rotating
inserts. The insert provides precision aiming down to 1В° while providing increased longevity to the LED fixture. To vertically adjust the unit after
mounting, the user simply loosens the screws located on either side of the unit, moves it into the desired position, then retightens the screws.
The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and slide the unit
for precise mount positioning. The stainless steel trunnion bracket has preset angles marked in 5В° intervals, allowing operators to precisely aim
each fixture.
Note: The LED10WSA series feature gold plated DT connectors to provide better conductivity. Most Larson Electronics LEDP5W-30, LEDLB,
LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The
mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending
on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating,
IR/Visible combos) will have different Deutsch connectors.
Applications for the LEDP10WSA include but are not limited to mining, dump trucks, construction machinery, cement mixers, and car washes.
11/18/2014
Page: 339
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LED10WSA-40 High Output LED Light
LED10WSA-40 Series Features
Lamp Type: CREE XL-L2В® LED
Automatic Current Sensing and Adjusting
Dimensions: 5.02"-L 5.20"-H 3.98"-D
Active Heat Management
Watts: 40
Ambient Op Temp -40В°C to +80В°C
Led Drive %: 90%
IP69K High Temp High Pressure Wash Down
Voltage: Universal Voltage 11-65V DC
EMC/EMI CISPR 25 Class 3 Rated
Beam Spread: 10В° Spot, 40В° Flood, 60В° Flood, 30В°/60В° Elliptical
304 Stainless Steel Mounting Hardware
Mounting: Flat Surface 304 SS Bracket - 360 Degree Adjustable
Shock Dampening Mounting System
Wiring: Gold Plated Deutsch IPD / LADD DT04-2P connector
Amps: 3.34 (on 12 volts) - 1.67 (on 24 volts)
Lumens: 3,680
Special Orders- Requirements
LED Light Color: White
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black
Weight: 4.85 Lbs
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 340
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
40 Watt LED Light on Trunnion Adjustable Surface Mount - 3600 Lumen - 9-48VDC - 390'L X 90'W Spot
Part #: LED10W-4RU
Price: $549.00
Buy American Compliant
The Larson Electronics LED10W-4RU LED Light offers high light output from a light weight, durable and water tight fixture. This IP67
rated LED light bar includes a U-bracket trunnion mount allowing it to be mounted on any flat surface while still being able to adjust
the angle after installation and produces 3600 lumens of light while drawing only 3.3 amps on 12 volts. This light can run on any
voltage from 9 to 48 volts and provides a durable and powerful lighting solution that is ideal for use in industrial and commercial
applications such as machine vision system lighting, security illumination and vehicle lighting applications.
The LED10W-4RU LED light bar from Larson Electronics produces a 3,600 lumens of bright light while drawing only 40 watts @3.3amps from a
12 volt electrical system. Four Seoul Z-Power-10 watt LEDs producing a maximum of 900 lumens each are arranged in rows and paired with 10
degree optics to produce a well focused light beam approximately 390 feet in length by 90 feet wide. We also offer optional floodlight versions
with 35 degree optics to produce a much wider beam with more light concentrated closer to the fixture, making these units ideal as spreader or
work lights. The beam on this light in flood configurations is approximately 170' long by 130' wide and elliptical in shape. These LED light bars are
IP67 rated and waterproof to 1 meter, sealed against intrusion by dust and dirt and constructed to withstand the demanding conditions found in
marine environments.
LED10W-4RU unit used as headlights
Dark road with a street lamp positioned
approximately 525' away
Click Photo to Enlarge
The same road illuminated with the LED10W4RU
Click Photo to Enlarge
11/18/2014
Page: 341
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Seoul Z-Power 10 watt LEDs. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units contain an internal voltage regulator which allows them to adjust input current to provide the correct LED voltage
levels regardless of input levels from 9 to 50 VDC. These LED10W series light bars can operate on current ranging from 9 to 50VDC without any
modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and stand alone applications such as those
found on boats and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are
impractical.
LED10W-4RU 35В° Flood Beam
(Opt)
LED10W-4RU 10В° Spot Beam
(Stnd)
Durability: The LED10W series of LED light bars from Larson Electronics offer IP67 rated construction that is designed to withstand demanding
environmental and operating conditions. These LED lights are designed for low profile mounting options, allowing them to be used in spaces
where room is at a premium. They offer extruded aluminum housings, stainless steel hardware and polycarbonate lenses that provide good
durability, yet are slimmer and lighter than extreme duty LEDLB-E series lights. These units can operate in temperatures ranging from -40
degrees Celsius to 80 degrees Celsius, are waterproof to 1 meter and are sealed against the ingress of dust, dirt and humidity. The Seoul ZPower 10 watt LEDs offer inherent LED resistance to shocks and vibrations, contributing to these unit’s 8.6G rating of vibration tolerance.
Mounting: These LED light bars incorporate a hinge style mounting bracket design that provides 180 degrees of adjustability and allows the
operator to attach one portion of the hinge bracket to the mounting surface first. The operator can then set the desired angle and attach the upper
portion of the hinge style mount to the light. The operator then adjusts and tightens the hinge bolt to lock the light bar into position once the
desired angle is set. This particular unit includes a U bracket trunnion mount which allows the fixture to be mounted to walls or any flat surface
while retaining the unit's angle adjustability.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as
part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
On this particular unit there is a one foot pigtail attached to the LED light terminating in a 2 pin Deutsch plug. A wiring harness attaches to the
Deutsch socket on the back of the LED light. The harness is terminated in a 2 pin Deutsch plug and includes 20 feet of cable, a relay and a
toggle switch that will operate on 12 or 24 volts. The wiring harness is not necessary to installation. Operators can use existing wiring and
switches, assuming they are rated for the amperage listed below.
11/18/2014
Page: 342
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LED10W-4RU LED Light Bar
LED10W-4RU LED Features
LEDs: Seoul Z-Power 10 Watt LEDs
Seoul Z-Power 10 Watt LEDs
Dimensions: 8.75"-L 2.75"-H 2.5"-D
LEDs Driven At 80%
Watts: 40
-40 C~ +80C Operating Temp Range
Voltage: 9-48 VDC
Spot Beam: 390'L x 90'W
900 Lumens per LED
Weight: 3.4 Lbs
70% Lumen Retention @50,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
IP67 Rated Waterproof to 1 meter
Mounting: Adjustable U-Mount Bracket
Download Spot and Flood Beam Specs
Wiring: 2 pin Deutsch plug
Amps: 3.3 (on 12 volts) 2.5 (on 24 volts)
Lumens: 3,600
Special Orders- Requirements
LED Light Color: 6300K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 80%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Lux At The Lens: 193,700
Lux At 1 Meter: 3,120
CRI: 70
CE Certified
EN55015 EMI
EN61547 EMS
EN62471 Photobiological Safety
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 343
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Manual
11/18/2014
Page: 344
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LED Light Emitter w/ Trunnion U-Bracket Mount - 16, 3-Watt LEDs - 9-42VDC - 700'L X 80'W Spot Beam
Part #: LEDLB-16ET
Price: $540.00
Buy American Compliant
The Larson Electronics LEDLB-16ET LED Light Bar offers high light output and extreme durability combined with
a versatile trunnion wall mounting system that provides 270 degrees of adjustability. This IP68 rated LED light bar
is waterproof to three meters and produces 2.880 lumens while drawing only 48 watts of power @4 amps from a 12
volt electrical system. This light can run on any voltage from 9 to 42 volts and provides an extremely rugged
lighting solution that is ideal for use in commercial marine environments as well as industrial and manufacturing
applications such as machine vision system lighting, heavy equipment illumination, blasting lighting and mining
operations.
The LEDLB-16ET LED light bar from Larson Electronics produces a 700' long by 80' wide light beam with 2,880 lumens of
bright light while drawing only 48 watts @4 amps from a 12 volt electrical system. Sixteen Edison EdixeonВ® Emitters
containing CREE EZBrightВ® three watt LEDs producing 180 lumens each are paired with high purity 10 degree optics to
produce a tightly focused spot beam with limited spread or light spillage. We also offer optional floodlight versions with 35
degree optics to produce a wider beam spread and more light over a larger area nearer the fixture, making flood versions
ideal for use as work and area lights. These LED light bars are IP68 rated and waterproof to 3 meters, sealed against
intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and
applications. The entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier
housings, rubber isolated mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations,
impacts, waves, hard rains, sand and high winds. This light is equipped with a trunnion mounting bracket that allows
operators to adjust the light fixture through 270 degrees of movement.
11/18/2014
Page: 345
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many
manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an
extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to
produce the maximum amount of power and longevity from the integrated Edison EdixeonВ® Emitters. The end result is
more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels
regardless of input levels across a specific range. These LEDLB series light bars can operate on current ranging from 9 to
42VDC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and
standalone applications such as those found on commercial boats, heavy equipment and vehicles where power systems
don’t always operate with 12 volts and external generators, transformers or inverters are impractical.
LEDLB-16ET 35В° Flood Beam
(Opt)
LEDLB-16ET 10В° Spot Beam
(Stnd)
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to
withstand extremes of environmental and operating conditions. The LED lights with the �E’ part number designation are
designed for extreme durability and are larger and nearly twice as heavy as their standard counterparts. These units can
withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three feet and resist
ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum and the lenses are unbreakable
polycarbonate. The EdixeonВ® LEDs offer inherent LED resistance to shocks and vibrations contributing to these units
15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high
humidity climates, very cold areas and rough saltwater conditions. They are also well suited to environments where
equipment is used in one temperature extreme and stored in another temperature extreme.
Adjustable Mounting: The trunnion wall mounting design on the LEDLB-16ET allows for post-installation angle
positioning. This means that by loosening 2 thumb bolts located on either side of the light, the operator can adjust the
positioning angle of this light 270 degrees. Then he/she would simply have to tighten thumb bolts to lock the angle in place.
No tools are required for adjusting angle. We also offer a BC-2 bar clamp mounting system you can view here for even
greater mounting versatility.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are
terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and
LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED
lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible
combos) will have different Deutsch connectors. You can review the Deutsch connector technical details here.
11/18/2014
Page: 346
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-16ET LED Light Bar
LEDLB LED Features
LEDs: 16 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 6.25"-L 3.25"-H 3.56"-D
LEDs Driven At 80%
Watts: 48
-40 C~ +80C Operating Temp Range
Voltage: 9-42 VDC
Spot Beam: 700'L x 80'W
Flood Beam: 230'L x 190'W
RoHS Compliant
Weight:6 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
Ambient Op Temp -40C to +125C
Mounting: Trunnion Bracket
IP68 Rated Waterproof
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps: 4 (on 12 volts) 2(on 24 volts)
Lumens: 2,880
Special Orders- Requirements
LED Light Color: 6000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Lux at Lens: Spot-199,000
Flood- 197,800
Lux at 1 Meter: Spot-12,910
Flood- 2,510
CE Certified
3 year warranty replacement on this LED light. After 30 days, the customer
ships the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement.
Scroll Down to Purchase-
11/18/2014
Page: 347
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- SpecSheet French
- SpecSheet Arabic
11/18/2014
Page: 348
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Manual
11/18/2014
Page: 349
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LED Light Emitter - 20 LEDs - 60 Watts - 750'L X 110'W Beam - Extreme Environment - 9-42VDC
Part #: LEDLB-20E
Price: $524.99
Buy American Compliant
The Larson Electronics LEDLB-20E LED Light Bar offers high light output and extreme durability combined with versatile mounting
and power options. This IP68 rated LED light bar is waterproof to three feet and produces 3,600 lumens while drawing only 60 watts of
power @5 amps from a 12 volt electrical system. This light can run on any voltage from 9 to 42 volts and provides an extremely rugged
lighting solution that is ideal for use in commercial marine environments as well as industrial and manufacturing applications such as
machine vision system lighting, heavy equipment illumination, blasting lighting and mining operations.
The LEDLB-20E LED light bar from Larson Electronics produces an 750' long by 110' wide light beam with 3,600 lumens of bright light. In a flood
configuration, this becomes an LED spreader light and covers 300' in length by 230' in width, making them ideal for use as work and area lights.
Twenty Edison EdixeonВ® Emitters containing CREE EZBrightВ® three watt LEDs producing 180 lumens each are arranged in rows and paired
with high purity 10 degree optics to produce a tightly focused spot beam with limited spread or light spillage. These LED light bars are IP68 rated
and waterproof to 3 feet, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments,
conditions and applications. The entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier housings,
rubber isolated mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains,
sand and high winds.
TShown above, vehicle headlights only...
Shown above, car headlights supported with LED light bar
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 350
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Edison EdixeonВ® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels
across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as
a result. This multi-voltage capability makes these units ideal for mobile and stand alone applications such as those found on commercial boats,
heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are
impractical.
LEDLB-20E 35В° Flood Beam
(Opt)
LEDLB-20E 10В° Spot Beam
(Stnd)
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of
environmental and operating conditions. The LED lights with the �E’ part number designation are designed for extreme durability and are larger
and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85
degrees Celsius, are waterproof to three feet and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum
and the lenses are unbreakable polycarbonate. The EdixeonВ® LEDs offer inherent LED resistance to shocks and vibrations contributing to these
units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates,
very cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme
and stored in another temperature extreme.
Mounting: Larson Electronics LEDLB series light bars are equipped standard with aluminum mounting blocks which slide within the aluminum
housing to allow users to adjust their positioning to match existing or user drilled mounting holes. Each aluminum mounting block has an
integrated rubber bushing to absorb vibrations and shocks. To secure the lights in place users simply slide the mounting bolts through the
aluminum mounting block and rubber isolator, through the mounting surface, then secure the bolt with a locking nut on the opposite side of the
mounting surface. This mounting system enables mounting to flat or round surfaces and allows for minimal 7 degrees of flexibility of angle
placement of the light. We also offer a BC-2 bar clamp mounting system you can view here for even greater mounting versatility.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as
part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
11/18/2014
Page: 351
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-20E LED Light Bar
LEDLB LED Features
LEDs: 20 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 12"-L 3"-H 3.57"-D
LEDs Driven At 80%
Watts: 60
-40 C~ +80C Operating Temp Range
Voltage: 9-42 VDC
Spot Beam: 800'L x 80'W
RoHS Compliant
Flood Beam: 250'L x 250'W
Weight: 6.2Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
LED Chip Op Temp -40C to +125C
Mounting: Stud Bracket
IP68 Rated Waterproof to 3ft
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps: 5 (on 12 volts) 2.5 (on 24 volts)
Lumens: 3600
Special Orders- Requirements
LED Light Color: 6000K or 3000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Lux-Spot : @Lens: 188,400 @ 1 Meter 24,800
Lux-Flood : @Lens: 199,800 @ 1 Meter 4,450
CE Certified
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 352
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- SpecSheet French
- SpecSheet Arabic
- Manual
11/18/2014
Page: 353
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Magnetic LED Light Bar on Trunnion Bracket w/ Double Ball Joint Mount - 8, 3-Watt LEDs - 120-277V AC
Part #: LEDLB-8ET-DBM-I
Price: $523.43
Buy American Compliant
The Larson Electronics LEDLB-8ET-DBM-I LED Light Bar offers high light output and extreme durability combined with a versatile
trunnion and double ball joint mount with magnetic base. The magnetic base provides 200 lbs of magnetic grip while a double ball joint
and trunnion mount provides the operator with the ability to adjust the unit to a wide variety of positions while mounted. This LED light
emitter bar light runs on 110VAC provided by an included inline power transformer.
The LEDLB-8ET-DBM-I LED light bar from Larson Electronics produces a 325' long by 70' wide light beam with 2,160 lumens of bright light. Eight
Edison EdixeonВ® Emitters containing CREE EZBrightВ® three watt LEDs producing 180 lumens each are arranged in rows and paired with high
purity 10 degree optics to produce a tightly focused spot beam with limited spread or light spillage. We also offer optional floodlight versions with
35 degree optics to produce a wider beam spread and more light over a larger area nearer the fixture, making flood versions ideal for use as
work and area lights.
These LED light bars are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt, and very ruggedly constructed to
withstand the most demanding environments, conditions, and applications. The entire Larson Electronics LEDLB-E series are constructed of
extruded aluminum and feature heavier housings, rubber isolated mounts and unbreakable polycarbonate lenses to provide increased durability
against vibrations, impacts, waves, hard rains, sand and high winds.
This LED light emitter bar light is designed to run directly off of any voltage ranging from 9 Volts to 42 Volts. However, with our new integrated
inline transformer design, the fixture can now be operated with standard 110 VAC power found in common wall outlets. Essentially, this means
the operator can use this LED light bar anywhere a wall plug in is available or, by disconnecting the step down transformer, he/she can power
this LED light emitter bar from any vehicle, equipment, ATV or boat electrical system.
You do not need to anything special to operate these light bars in their multi-voltage 9-42 Volt configuration. They will sense the incoming voltage
and adapt accordingly. If operator decides he/she would like to run off 9 - 42 VDC, all he/she has to do is disconnect from said transformer.
11/18/2014
Page: 354
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This image shows a dark street, illuminated by nothing but distant
The same street illuminated with the LEDLB-8ET-DBM-I, the beam
street lamps and suburban lighting.
easily reaches the street light over 300' away.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 355
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Edison EdixeonВ® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels
across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as
a result. This multi-voltage capability makes these units ideal for mobile and stand alone applications such as those found on commercial boats,
heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are
impractical.
LEDLB-8ET-DBM-I 35В° Flood Beam
(Opt)
LEDLB-8ET-DBM-I 10В° Spot Beam
(Stnd)
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of
environmental and operating conditions. The LED lights with the �E’ part number designation are designed for extreme durability and are larger
and heavier than the standard LEDLB series lights and are nearly twice as heavy as their standard counterparts. These units can withstand rapid
temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity.
The housings are formed from thick extruded aluminum and the lenses are unbreakable polycarbonate. The EdixeonВ® LEDs offer inherent LED
resistance to shocks and vibrations contributing to these units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high
stress - high vibratory conditions, high humidity climates, very cold areas and rough saltwater conditions. They are also well suited to
environments where equipment is used in one temperature extreme and stored in another temperature extreme.
Adjustable Mounting: A magnetic base with a 200 lb grip temporarily secures this unit to various metallic surfaces while a double ball joint
mount allows 360 degrees of rotation and 140 degrees of tilt. To adjust this LED unit simply loosen the thumb bolt located on the side of unit,
position the light head as desired, then retighten the thumb screw. The light head can be further adjusted by loosening the thumb screws on
either side of the light head and moving the light head through 270 degrees of vertical tilt. This mounting system will hold the unit securely in
place, even under rough working or driving conditions, and provides an extreme level of placement versatility.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as
part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
11/18/2014
Page: 356
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-8ET-DBM-I LED Light Bar
LEDLB LED Features
LEDs: 8 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 6.25"-L 3"-H 3.56"-D
LEDs Driven At 80%
Watts: 24
-40 C~ +80C Operating Temp Range
Voltage: 110 with Transformer- 9-42 VDC Without Transformer
RoHS Compliant
Weight: 3.6 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
LED Chip Op Temp -40C to +125C
Mounting: Trunnion with Double Ball Joint and Magnetic Base
IP68 Rated Waterproof to 3 meters
Wiring: 16' with Cord Cigarette Plug
Amps: 2 (on 12 volts) 1 (on 24 volts)
Lumens: 1440
Special Orders- Requirements
LED Light Color: 6000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Lux-Spot : @Lens: 192,900 @ 1 Meter 17,000
Lux-Flood : @Lens: 186,500 @ 1 Meter 1,930
CE Certified
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
Links (Click on the below items to view):
- Manual
11/18/2014
Page: 357
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
16 Watts General Area Use LED Light Fixture - 24" Light Bar
Part #: GAU-24-16W-LED
Price: $501.12
Buy American Compliant
The Larson Electronics GAU-24-16W-LED is a low voltage lighting solution approved for use in wet locations. This powerful 24.9" long
LED strip light produces 1208 lumens, operates from 12 or 24 VDC, and is suitable for a variety a of applications.
The GAU-24-16W-LED is designed to provide a high output and ruggedly durable lighting solution. This low voltage explosion proof light can be
operated with either 12 or 24 volt DC current and includes 6 feet of connecting lead with standard two wire configuration. This light is constructed
of powder coated extruded aluminum for excellent strength and durability and is rated IP54 for protection against exposure to splashing water
and limited dust ingress. These units are configured in a 24.9" long strip or "bar" profile for installation in locations where wide dispersal and a low
profile is preferred. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for
older, bulkier, and less reliable HID and halogen light fixtures.
Click to Enlarge Photo
Click to Enlarge Photo
11/18/2014
Click to Enlarge Photo
Page: 358
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Durability/Mounting: The GAU-24-16W-LED explosion proof LED light is constructed of extruded aluminum with a tough powder coat finish for
high strength and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and basic protection against splashing
water such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty
conditions are commonly encountered.
The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree
LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life
than comparable LEDs.
Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust
the light 170В° vertically for the best placement. The entire assembly weighs 1.4 lbs and measures 24.9 inches in length and 2.68 inches wide and
1.69" deep, making it ideal for mounting in areas where space is limited and a low profile fixture more readily installed.
Wiring/Power: These LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting configuration.
These lights operate from 12 or 24 volt DC current at 16.8 watts 1.3 amps on 12 VDC and .66 amps on 24 VDC.
Versatility: This unit carries an IP54 water resistant rating ensuring protection against limited ingress from dusts, dirt, and basic protection
against light water spray landing directly on the fixture. This light is ideal for indoor or outdoor applications and industrial operations where dusty
or wet conditions are commonly encountered.
Specifications / Additional Information
GAU-24-16W-LED General Area LED Light
GAU-24-16W-LED Ratings
Lamp Type: LED
IP54 Ingress Protection
Dimensions: Lamp 24.90"-L 2.68" -W 1.69"- D
T3 Temperature Rating
Weight: 1.4lb | 0.6 k g
Watts: 16.8 W
Voltage: 12-24 VDC
Lumens: 1208
Lamp Life Expectancy: 100,000 Hours
CRI: 75
Amps: 1.3 A @12 VDC | 0.66 A @ 24 VDC
Light Color: 6500K
Special Orders- Requirements
Beam Type: 100В° Flood
Contact us for special requirements
Mounting: Standard Triangle End Brackets
Toll Free: 1-800-369-6671
Temp Range: -40°C – +85°C
Intl: 1-903-498-3363
Wiring: 6Ft Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 359
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- STEP
- DXF
11/18/2014
Page: 360
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
16 Watts General Area Use LED Light Fixture - 24" Light Bar
Part #: GSLEDIP24-GEN
Price: $501.12
Buy American Compliant
The Larson Electronics GSLEDIP24-GEN is a low voltage lighting solution approved for for use in wet locations. This powerful 24.9"
long LED strip light produces 1208 lumens, operates from 12 or 24 VDC, and is suitable for a variety a of applications.
The GSLEDIP24-GEN is designed to provide a high output and ruggedly durable lighting solution. This low voltage explosion proof light can be
operated with either 12 or 24 volt DC current and includes 6 feet of connecting lead with standard two wire configuration. This light is constructed
of powder coated extruded aluminum for excellent strength and durability and is rated IP54 for protection against exposure to splashing water
and limited dust ingress. These units are configured in a 24.9" long strip or "bar" profile for installation in locations where wide dispersal and a low
profile is preferred. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for
older, bulkier, and less reliable HID and halogen light fixtures.
Click to Enlarge Photo
Click to Enlarge Photo
11/18/2014
Click to Enlarge Photo
Page: 361
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Durability/Mounting: The GSLEDIP24-GEN explosion proof LED light is constructed of extruded aluminum with a tough powder coat finish for
high strength and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and basic protection against splashing
water such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty
conditions are commonly encountered.
The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree
LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life
than comparable LEDs.
Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust
the light 170В° vertically for the best placement. The entire assembly weighs 1.4 lbs and measures 24.9 inches in length and 2.68 inches wide and
1.69" deep, making it ideal for mounting in areas where space is limited and a low profile fixture more readily installed.
Wiring/Power: These LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting configuration.
These lights operate from 12 or 24 volt DC current at 16.8 watts 1.3 amps on 12 VDC and .66 amps on 24 VDC.
Versatility: This unit carries an IP54 water resistant rating ensuring protection against limited ingress from dusts, dirt, and basic protection
against light water spray landing directly on the fixture. This light is ideal for indoor or outdoor applications and industrial operations where dusty
or wet conditions are commonly encountered.
Specifications / Additional Information
GSLEDIP24-GEN General Area LED Light
GSLEDIP24-GEN Ratings
Lamp Type: LED
IP54 Ingress Protection
Dimensions: Lamp 24.90"-L 2.68" -W 1.69"- D
T3 Temperature Rating
Weight: 1.4lb | 0.6 k g
Watts: 16.8 W
Voltage: 12-24 VDC
Lumens: 1208
Lamp Life Expectancy: 100,000 Hours
CRI: 75
Amps: 1.3 A @12 VDC | 0.66 A @ 24 VDC
Light Color: 6500K
Special Orders- Requirements
Beam Type: 100В° Flood
Contact us for special requirements
Mounting: Standard Triangle End Brackets
Toll Free: 1-800-369-6671
Temp Range: -40°C – +85°C
Intl: 1-903-498-3363
Wiring: 6Ft Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 362
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 363
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LED Light Emitter - 12 LEDs - Red Illumination - 36 Watts - 2160 Lumens - 300'L X 45'W Spot Beam
Part #: LEDLB-12ET-RED
Price: $425.00
Buy American Compliant
The LEDLB-12ET-RED LED Light Bar offers high light output in a light weight, durable, low profile housing
combined with versatile mounting and power options. This IP67 rated LED light bar is waterproof to one meter and
produces 2,160 lumens while drawing only 36 watts of power @3 amps from a 12 volt electrical system. This light
can run on any voltage from 9 to 42 volts and is configured to produce green colored light only.
The LEDLB-24-RED LED light bar produces a 300' long by 40' wide light beam with 2,160 lumens of green light that is ideal
for low light visibility applications such as hunting and military operations while drawing only 36 watts @6 amps from a 12
volt electrical system. Twelve Edison EdixeonВ® Emitters containing CREE EZBrightВ® three watt LEDs producing 180
lumens each are paired with high purity 10 degree optics to produce a tightly focused spot beam with limited spread or light
spillage. We also offer optional floodlight versions with 35 degree optics to produce a wider beam spread approximately
150' long by 140' feet wide.
These LED light bars are IP67 rated and waterproof to one meter, sealed against intrusion by dust and dirt and ruggedly
constructed to withstand demanding environments and applications. The entire Larson Electronics LEDLB series are
constructed of extruded aluminum and feature rubber isolated mounts and unbreakable polycarbonate lenses to provide
durability and resistance to vibrations, impacts, waves, hard rains, sand and high winds.
The advantage in colored LED light bars lies in the fact that no lenses are required to change the light color. LEDs can be
configured to produce light in only a specific color, allowing the full power of the LED to be projected. Traditional colored
lights require a colored lens or filter to produce colored light, which reduces the overall light output as some of the light
energy is lost to the colored lens.
11/18/2014
Page: 364
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many
manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an
extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to
produce the maximum amount of power and longevity from the integrated Edison EdixeonВ® Emitters. The end result is
more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels
regardless of input levels ranging from 9 to 42 VDC. These LEDLB series light bars can operate on current ranging from 9
to 42 VDC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile
and stand alone applications such as those found on boats, heavy equipment and vehicles where power systems don’t
always operate with 12 volts and external generators, transformers or inverters are impractical.
LEDLB-12ET-RED 35В° Flood Beam
(Opt)
LEDLB-12ET-RED 10В° Spot Beam
(Stnd)
Durability: The LEDLB series of LED light bars are lighter and smaller than our LEDLB-E extreme series and offer IP67
rated construction that is designed to withstand tough environmental and operating conditions. These units can operate in
temperatures ranging from -40 degrees Celsius to 85 degrees Celsius, are waterproof to one meter and resist ingress of
dust, dirt and humidity. The housings are formed from extruded aluminum, the hardware is stainless steel and the lenses
are unbreakable polycarbonate. The EdixeonВ® LEDs offer inherent LED resistance to shocks and vibrations, contributing to
these units 15.6Grms rating of vibration tolerance. These LEDLB series light bars are ideal for use in marine environments
as well as industrial and commercial settings.
Mounting: These LEDLB light bars feature a smaller profile and lighter weight than our LEDLB-E series lights, making
them ideal for use in locations where traditional lights cannot fit or would block other mounted equipment. Larson
Electronics LEDLB series light bars are equipped standard with aluminum mounting blocks which slide within the aluminum
housing to allow users to adjust their positioning to match existing or user drilled mounting holes. Each aluminum mounting
block has an integrated rubber bushing to absorb vibrations and shocks. To secure the lights in place users simply slide the
mounting bolts through the aluminum mounting block and rubber isolator, through the mounting surface, then secure the
bolt with a locking nut on the opposite side of the mounting surface.
In this LED emitter light bar model, an additional mounting option is provided. The adjustable, shock insulated mounts are
attached to a simple, inverted u-bracket type mount. The LED light bar can then be mounted via a single 3/8 bolt through
the center of the bracket. We also offer a BC-2 bar clamp mounting system you can view here for even greater mounting
versatility.
Note: Most LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a
Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights
ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible combos) will have
different Deutsch connectors.
11/18/2014
Page: 365
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-12ET-RED LED Light Bar
LEDLB LED Features
LEDs: 12 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 8"-L 4.7"-H 3.00"-D
LEDs Driven At 80%
Watts: 36
-40 C~ +80C Operating Temp Range
Voltage: 9-42 VDC
Spot Beam: 300'L x 45'W
Flood Beam: 150'L x 140'W
70% Lumen Retention @65,000 hours
Weight: 4.6 Lbs
IP67 Rated Waterproof to 1 meter
Lighting Configuration: 10В° Spot or 35В° Flood
Mounting: Flat Surface or Tube - Adjustable
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps: 3 (on 12 volts) 1.5 (on 24 volts)
Lumens: 2,160
Special Orders- Requirements
LED Light Color: RED
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
CE Certified
3 year warranty replacement on this LED light. After 30 days, the customer
ships the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement.
Scroll Down to Purchase-
11/18/2014
Page: 366
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- SpecSheet French
- SpecSheet Arabic
11/18/2014
Page: 367
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LED Light Emitter w/ Magnetic Mounts - 12, 3-Watt LEDs - Trunnion Mount - 550'L X 70'W Spot Beam
Part #: LEDLB-12ET-M
Price: $442.00
Buy American Compliant
The Larson Electronics LEDLB-12ET-M LED Light Bar offers high light output and extreme durability combined
with a versatile magnetic trunnion mounting system that provides convenience and 270 degrees of adjustability.
This IP68 rated LED light bar is waterproof to three meters and produces 2,160 lumens while drawing only 36 watts
of power @3 amps from a 12 volt electrical system. This light can run on any voltage from 9 to 42 volts and comes
equipped with a 16ft coil cord ending in a cigarette plug connector.
The LEDLB-12ET-M LED light bar from Larson Electronics produces a 550' long by 70' wide light beam with 2,160 lumens
of bright light. Twelve Edison EdixeonВ® Emitters containing CREE EZBrightВ® three watt LEDs producing 180 lumens each
are arranged in rows and paired with high purity 10 degree optics to produce a tightly focused spot beam with limited
spread or light spillage. We also offer optional floodlight versions with 35 degree optics to produce a wider beam spread
and more light over a larger area nearer the fixture, making flood versions ideal for use as work and area lights. These LED
light bars are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly
constructed to withstand the most demanding environments, conditions and applications.
This light is equipped with 2-100lbs grip magnetic mount bases and 16 foot coil cord ending in a cigarette plug connector.
This magnetic base allows fast and easy setup of this light on vehicles and equipment and will hold the fixture in place at
speeds up to 65mph provided the mount is properly affixed and secure.
11/18/2014
Page: 368
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This image shows a dark street, illuminated by nothing but distant street
lamps and suburban lighting.
The same street illuminated with the LEDLB-12ET-M, the beam easily
reaches the street light over 500' away.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 369
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many
manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an
extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to
produce the maximum amount of power and longevity from the integrated Edison EdixeonВ® Emitters. The end result is
more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels
regardless of input levels across a specific range. These LEDLB series light bars can operate on current ranging from 9 to
42VDC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and
stand alone applications such as those found on commercial boats, heavy equipment and vehicles where power systems
don’t always operate with 12 volts and external generators, transformers or inverters are impractical.
LEDLB-12ET-M 35В° Flood Beam
(Opt)
LEDLB-12ET-M 10В° Spot Beam
(Stnd)
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to
withstand extremes of environmental and operating conditions. The LED lights with the �E’ part number designation are
designed for extreme durability and are larger and heavier than the standard LEDLB series lights and are nearly twice as
heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85
degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from
thick extruded aluminum and the lenses are unbreakable polycarbonate. The EdixeonВ® LEDs offer inherent LED resistance
to shocks and vibrations contributing to these units 15.6Grms rating of vibration tolerance. We recommend these LED lights
for high stress - high vibratory conditions, high humidity climates, very cold areas and rough saltwater conditions. They are
also well suited to environments where equipment is used in one temperature extreme and stored in another temperature
extreme.
Adjustable Magnetic Mounting: The dual 100 lbs magnets and trunnion mounting design on the LEDLB-12-ET-M allows
for easy fixture placement and post-placement angle positioning. This means that by loosening 2 thumb bolts located on
either side of the light, the operator can adjust the positioning angle of this light 270 degrees. Then he/she would simply
have to tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle. This mounting system
makes this unit ideal for vehicle and equipment lighting applications where the unit can simply be attached or removed as
needed. Please note, the magnetic base on this unit increases the units overall height.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are
terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and
LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED
lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible
combos) will have different Deutsch connectors.
11/18/2014
Page: 370
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-12ET-M LED Light Bar
LEDLB LED Features
LEDs: 12 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 8.25"-L 3"-H 3.56"-D
LEDs Driven At 80%
Watts: 36
-40 C~ +80C Operating Temp Range
Voltage: 9-42 VDC
Spot Beam: 550'L x 70'W
Flood Beam: 120'L x 100'W
RoHS Compliant
Weight: 5.5 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
LED Chip Op Temp -40C to +125C
Mounting: Magnetic Base Trunnion
IP68 Waterproof to 3 meters
Wiring: 16 Foot Coil Corg w/ Cigarette Plug
Amps: 3 (on 12 volts) 1.5 (on 24 volts)
Lumens: 2160
Special Orders- Requirements
LED Light Color: 6000K or 3000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]tronics.com
Housing Colors: Black or White
Lux-Spot : @Lens: 192,900 @ 1 Meter 17,000
Lux-Flood : @Lens: 186,500 @ 1 Meter 1,930
CE Certified
3 year warranty replacement on this LED light. After 30 days, the customer
ships the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement.
Scroll Down to Purchase-
11/18/2014
Page: 371
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- SpecSheet French
- SpecSheet Arabic
- Manual
11/18/2014
Page: 372
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
4 Watt LED Light Fixtures for Hazardous Location Illumination - 6.5" Low Voltage Light Fixture
Part #: GSLEDIP6-C1D2
Price: $491.00
Buy American Compliant
The Larson Electronics GSLEDIP6 is a low voltage hazardous location lighting solution approved for Class1 Division 2 environments
and U.L. 1598 compliant for use in wet locations. This powerful LED strip light produces 221 lumens, operates from 12 or 24 VDC, and
is suitable for a variety of applications.
The GSLEDIP6 is designed to provide a high output and ruggedly durable lighting solution for applications where Class 1 Division 2 compliance
is required. This low voltage hazardous area light can be operated with either 12 or 24 volt DC (choose below) current and includes 6 feet of
connecting lead with standard two wire configuration. This light is constructed of powder coated extruded aluminum for excellent strength and
durability and is rated IP54 for protection against exposure to water spray and limited dust ingress. These units are configured in a 6.5" long strip
or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool running operation, and good
color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable incandescent and halogen light fixtures.
Durability/Mounting: The GSLEDIP6 hazardous location LED light is constructed of extruded aluminum with a tough powder coat finish for high
strength and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and l protection against light water spray
such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty conditions
are commonly encountered.
The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree
LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life
than comparable LEDs.
Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust
the light vertically for the best placement. The entire assembly weighs 0.7 lbs and measures 6.5 inches in length and 2.68 inches wide and 1.69"
deep, making it ideal for mounting in areas where space is limited and a low profile fixture more readily installed.
Wiring/Power: These hazardous location LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting
configuration. These lights are not multi-voltage; each light is preconfigured for 12 or 24 volt DC current at 4 watts .33 amps on 12 VDC and .16
amps on 24 VDC.
Versatility: The GSLEDIP6 is ETL approved for Class 1 Division 2 groups A,B,C and D locations. This unit carries an IP56 waterproof rating
ensuring protection against limited ingress from dusts, dirt, oils and full protection against water sprayed at high pressure directly on the fixture.
This light is ideal for indoor or outdoor applications and industrial operations with hazardous location classification where dusty or wet conditions
are commonly encountered.
11/18/2014
Page: 373
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
GSLEDIP6 Hazardous Location LED Lighting
ETL Listed
Lamp Type: LED
Class 1 Division 2 Groups A,B,C,D
Dimensions: Lamp 6.5"-L 2.68" -W 1.69"- D
CSA 22.2 No. 250.0
Weight: 0.35lb | 0.15 k g
1598
Watts: 4
IP54 Ingress Protection
Voltage: 12-24 VDC
T3 Temperature Rating
Lumens: 221
Lamp Life Expectancy: 100,000 Hours
CRI: 75
Amps: 0.33 A @12 VDC | 0.165 A @ 24 VDC
Light Color: 6500K
Special Orders- Requirements
Beam Type: 100В° Flood or 30В° Spot
Contact us for special requirements
Mounting: 1/4” - 20 Screws /Aluminum 1” Yoke
Toll Free: 1-800-369-6671
Temp Range: -40°C – +85°C
Intl: 1-903-498-3363
Wiring: 6Ft Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 374
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Hi-Res Image 1 - Hi-Res Image 2 - Hi-Res Image 3 - Hi-Res Image 4 -
11/18/2014
Page: 375
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LED Machine Light - 200lb. Magnetic Mount - 100'L X 85'W Beam - 24 Watt - Runs Off 110VAC
Part #: LEDLB-8ET-M-110V
Price: $472.31
Buy American Compliant
The Larson Electronics LEDLB-8ET-F-M-110V LED Light Bar offers high light output and extreme durability combined with a versatile
magnetic mounting system. This LED light emitter bar light runs on 110VAC provided by an included inline power transformer. The 110
VAC capability of this light provides an extremely rugged lighting solution that is ideal for use in industrial and manufacturing
applications such as machine vision system lighting, industrial machining illumination, blasting lighting and mining operations.
The LEDLB-8ET-F-M-110V LED light bar from Larson Electronics produces a 100' long by 85' wide light beam with 1440 lumens of bright light.
We also offer an optional spot lens with a 325' long by 70' wide beam. Eight Edison EdixeonВ® Emitters containing CREE EZBrightВ® three watt
LEDs producing 180 lumens each are arranged in rows and paired with high purity 10 degree optics to produce a tightly focused spot beam with
limited spread or light spillage. This light shipped as a floodlight with 35 degree optics to produce a wider beam spread and more light over a
larger area nearer the fixture, making flood versions ideal for use as work and area lights. This LED work light can be made as a spotlight with a
10 degree optics to produce a tighter and more narrow spot beam. These LED light bars are IP68 rated and waterproof to 3 feet, sealed against
intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications.
The entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier housings, rubber isolated mounts and
unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains, sand and high winds. This
magnetic base allows fast and easy setup of this light on vehicles and equipment and will hold the fixture in place at speeds up to 80 mph
provided the mount is properly affixed and secure.
11/18/2014
Page: 376
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This image shows a dark street, illuminated by nothing but distant
The same street illuminated with the LEDLB-8ET-F-M-110V, easily
street lamps and suburban lighting.
reaching distances of 90' in length and 70' in width. .
Click Photo to Enlarge
Click Photo to Enlarge
This LED light emitter bar light is designed to run on any voltage ranging from 9 Volts to 42 Volts. However, with our new integrated inline
transformer design, the fixture can now be operated with standard 110 VAC power found in standard wall outlets. Essentially, this means the
operator can use this LED light bar anywhere a wall plug in is available or, by disconnecting the step down transformer, he/she can power this
LED light emitter bar from any vehicle, equipment, ATV or boat electrical system. You do not need to anything special to operate these light bars
in their multi-voltage 9-32 Volt configuration. They will sense the incoming voltage and adapt accordingly.
This unit is also shipped with 6' of additional SOOW cord, for a combined total length of 11' from the converter to the fixture. In this particular
light, a step down transformer converts the original 110 Volt current into 12 volts to accommodate the fixture. If operator decides he/she would
like to run off 9 - 42 VDC, all he/she has to do is disconnect from said transformer.
11/18/2014
Page: 377
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Edison EdixeonВ® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels
across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as
a result. This multi-voltage capability makes these units ideal for mobile and standalone applications such as those found on commercial boats,
heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are
impractical.
LEDLB-8ET-F-M-110V 35В° Flood Beam
(Stnd)
LEDLB-8ET-F-M-110V 10В° Spot Beam
(Opt)
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of
environmental and operating conditions. The LED lights with the �E’ part number designation are designed for extreme durability and are larger
and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85
degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded
aluminum and the lenses are unbreakable polycarbonate. The EdixeonВ® LEDs offer inherent LED resistance to shocks and vibrations
contributing to these units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions,
high humidity climates, very cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in
one temperature extreme and stored in another temperature extreme.
Magnetic Mounting: The 200 lbs magnet mounting design on the LEDLB-4E-M allows for easy fixture placement and removal. This mounting
system includes a power cord with a cigarette plug connector which makes this unit ideal for vehicle and equipment lighting applications where
the unit can simply be attached or removed as needed. Please note, the magnetic base on this unit increases the units overall height.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as
part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
11/18/2014
Page: 378
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-8ET-F-M-110V LED Light Bar
LEDLB LED Features
LEDs: 8 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 6.25"-L 3"-H 3.56"-D
LEDs Driven At 80%
Watts: 24
-40 C~ +80C Operating Temp Range
Voltage:110 with included transformer- 9-42 VDC Without transformer RoHS Compliant
Weight: 3.8 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
LED Chip Op Temp -40C to +125C
Mounting: 200lbs Magnetic Mount
Light - IP68 Rated Waterproof to 3 meters
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps: 2 (on 12 volts) 1 (on 24 volts)
Lumens: 1440
Special Orders- Requirements
LED Light Color: 6000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Lux-Spot : @Lens: 188,900 @ 1 Meter 12,860
CE Certified
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 379
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 380
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
40 Watt LED Sensor Light – Night/Day Occupancy Sensing - 400W Metal Halide Equivalent
Part #: LED400-1227-OS
Price: $467.00
11/18/2014
Page: 381
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in the USA Compliant
The LED400-1227-OS LED Sensor Light with motion-night/day sensor offers high light output from a compact form factor and is
designed to provide a more durable and long lived alternative to halogen and metal halide security and area lights. This 40 watt LED
light is equipped with a night/day and motion sensor and produces illumination comparable to a 300-400 watt metal halide light without
the high heat, fragile construction, or high energy costs of incandescent lighting. This light can be operated as a day/night sensing
energy saving area light, or as a motion sensing security or general area light.
The LED400-1227-OS is a wall pack style LED light from Larson Electronics designed to provide high output and reliable automatic operation.
Equipped with a built in sensor that controls operation according to day/night cycles and movement, this light is well suited to use as a security
light, outdoor area light, and as a general purpose indoor light that can sense when a room is occupied or unoccupied and operate the light
accordingly. This 40 watt LED light produces a light beam that is longer and narrower than a standard Rab Floodzilla 250W Metal Halide (see
comparison chart below). The beam will illuminate an area nearly twice the distance as a standard 250W metal halide flood light, but is 30%
narrower than the metal halide flood.
The Larson Electronics LED400-1227-OS draws only 0.35 amps at 120 VAC. The light assembly consists of twelve 3.3 watt LEDs paired with
high purity specular optics to produce a total lumen output comparable to that of a 300-400 watt metal halide lamp. This LED wall pack is
designed to withstand demanding conditions and is waterproof, vapor proof, and built to resist the damaging effects of an outdoor environment.
The LED400-1227-OS consists of twelve LEDs housed within a waterproof aluminum housing that is powder coated for added durability and
resistance to corrosion. The LED lamp assembly is protected by a shatterproof polycarbonate lens which is secured to the housing with a
waterproof seal.
Mounting hardware for the LED400-1227-OS consists of a stainless steel coated lamp bracket, wiring box, motion-day/night sensor, and a heavy
gauge mounting post with 4 predrilled screw holes. The lamp assembly provides for 380/180 degrees of rotation to allow the user to position the
unit as desired once mounted, and the sensor can be adjusted independently of the lamp for precise coverage.
This unit comes assembled and ready to mount and is ideal for mounting to flat surfaces such as walls and under eaves or overhangs on the
corners of buildings. This light is designed to operate with voltages ranging from 110 VAC to 277 VAC, providing versatile power connection
options and the ability to run the unit with standard 120-220 VAC voltages. The LED400-1227-OS provides an efficient and highly durable
alternative to standard incandescent and metal halide wall pack lights that produces a more far reaching beam while using only a fraction the
power.
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
With the LED400-1227-OS there is no warm up period, the light can be cycled on and off without any reduction in lamp life, there is no glass or
filament to shatter or break, and the solid state LED design provides 50,000 hours of operation. This light will operate according to movement
and light levels, making it ideal for use as a security light, wall pack down lighting, upwards lighting, monuments, marinas, docks, warehouses,
billboards, and parking lots just to name a few examples.
11/18/2014
Page: 382
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LED400-1227-OS Sensor Light
LED400-1227-OS
Lamp Type: LED
Waterproof/Vapor Proof
Dimensions: W-8 1/2" D-3 1/8" H-6 3/8"- Lamp Only
Operates on Standard 110-277 VAC
Watts: 40
Impact/Vibration Resistant Construction
Lumens: 1462
50,000 Hour LED Life
Voltage: 110~277 Volts AC
ETL Approved for WET LOCATIONS
Lighting Configuration: Flood
Night/Day - Motion Sensing Operation
Mounting: 4 Hole Wall Post with Adjustable Bracket
Wiring: Pigtail
Amps: 0.33 @ 120VAC
LED Light Color: N/A
Special Orders- Requirements
LED Life Expectancy: 50,000 hours
Contact us for special requirements
Materials: Aluminum Housing, Polycarbonate Lens
Toll Free: 1-800-369-6671
Housing Colors: Black
Intl: 1-903-498-3363
Click here to see the LM-79 report on this LED Light
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 383
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Infrared LED Light Bar w/ Magnetic Base - Trunnion Bracket - Extreme Environment - 550'L X 70'W Spot
Part #: LEDLB-12ET-IR-M
Price: $455.00
Buy American Compliant
The Larson Electronics LEDLB-12ET-IR-M LED Light Bar offers high light output and extreme durability combined
with a versatile magnetic trunnion mounting system that provides convenience and 270 degrees of adjustability.
This IP68 rated infrared LED light bar is waterproof to three meters and produces a 2,160 lumen infrared light
beam that can only be seen through the use of night vision goggles. 850Nm versions have a very slight red glow
around the LED emitters when veiwed from a certain angle while 940Nm versions are completely invisible to the
naked eye. This light can run on any voltage from 9 to 42 volts and provides an extremely rugged infrared lighting
solution that is ideal for use in commercial and industrial security applications as well as military environments.
Click here to see the LED version of this
The LEDLB-12E-M-IR LED infrared light bar from Larson Electronics produces 2,160 lumens and a 550' long by 70' wide
infrared light beam. Twelve 3 watt Edison EdixeonВ® Infrared Emitters producing 180 lumens each are arranged in rows and
paired with high purity 10 degree optics to produce a tightly focused spot beam with limited spread or light spillage. We also
offer optional floodlight versions with 35 degree optics to produce a wider beam spread and more light over a larger area
nearer the fixture. These infrared LED light bars are IP68 rated and waterproof to 3 feet, sealed against intrusion by dust
and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications. The
entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier housings, rubber
isolated mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves,
hard rains, sand and high winds. This light is equipped with 2-100lbs grip magnetic mount bases and 16 foot coil cord
ending in a cigarette plug connector. This magnetic base allows fast and easy setup of this light on vehicles and equipment
and will hold the fixture in place at speeds up to 65mph provided the mount is properly affixed and secure.
11/18/2014
Page: 384
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LEDLB-12ET-IR-M 35В° Flood Beam
(Opt)
LEDLB-12ET-IR-M 10В° Spot Beam
(Stnd)
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many
manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an
extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to
produce the maximum amount of power and longevity from the integrated Edison EdixeonВ® Emitters. The end result is
more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels
regardless of input levels across a specific range. These LEDLB series light bars can operate on current ranging from 9 to
42VDC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and
standalone applications such as those found on commercial boats, heavy equipment and vehicles where power systems
don’t always operate with 12 volts and external generators, transformers or inverters are impractical.
Click here to view an article on the Generations of Night Vision and Infrared.
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to
withstand extremes of environmental and operating conditions. The LED lights with the �E’ part number designation are
designed for extreme durability and are larger and heavier than the standard LEDLB series lights and are nearly twice as
heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85
degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from
thick extruded aluminum and the lenses are unbreakable polycarbonate. The EdixeonВ® LEDs offer inherent LED resistance
to shocks and vibrations contributing to these units 15.6Grms rating of vibration tolerance. We recommend these LED lights
for high stress - high vibratory conditions, high humidity climates, very cold areas and rough saltwater conditions. They are
also well suited to environments where equipment is used in one temperature extreme and stored in another temperature
extreme.
Adjustable Magnetic Mounting: The dual 100 lbs magnets and trunnion mounting design on the LEDLB-12-ET-IR-M
allows for easy fixture placement and post-placement angle positioning. This means that by loosening 2 thumb bolts
located on either side of the light, the operator can adjust the positioning angle of this light 270 degrees. Then he/she would
simply have to tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle. This mounting
system makes this unit ideal for vehicle and equipment lighting applications where the unit can simply be attached or
removed as needed. Please note, the magnetic base on this unit increases the units overall height.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are
terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and
LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED
lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible
combos) will have different Deutsch connectors.
11/18/2014
Page: 385
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-12ET-IR-M LED Light Bar
LEDLB LED Features
LEDs: 12 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 8.25"-L 3"-H 3.56"-D
LEDs Driven At 80%
Watts: 36
-40 C~ +80C Operating Temp Range
Voltage: 9-42 VDC
Spot Beam: 550'L x 70'W
Flood Beam: 120'L x 100'W
RoHS Compliant
Weight:5.5 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
LED Chip Op Temp -40C to +125C
Mounting: Magnetic Base Trunnion
IP68 Rated Waterproof to 3 meters
Wiring: 16' coiled cord w/ Cigarette Plug
Amps: 3 (on 12 volts) 1.5 (on 24 volts)
Lumens: 2160
Special Orders- Requirements
LED Light Color: 750Nm, 850Nm or 940Nm Infrared
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
CE Certified
3 year warranty replacement on this LED light. After 30 days, the customer
ships the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement.
Scroll Down to Purchase-
11/18/2014
Page: 386
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Manual
11/18/2014
Page: 387
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LED Light Bar on Trunnion Mount - Extreme Environment - 12 LEDs - 9-42V - 550'L X 70'W Beam
Part #: LEDLB-12ET
Price: $405.00
Buy American Compliant
The Larson Electronics LEDLB-12ET LED Light Bar offers high light output and extreme durability combined with
a versatile trunnion mounting system that provides 270 degrees of adjustability. This IP68 rated LED light bar is
waterproof to three meters and produces 2,160 lumens while drawing only 36 watts of power @3 amps from a 12
volt electrical system. This light can run on any voltage from 9 to 42 volts and provides an extremely rugged
lighting solution that is ideal for use in commercial marine environments as well as industrial and manufacturing
applications such as machine vision system lighting, heavy equipment illumination, blasting lighting and mining
operations.
The LEDLB-12ET LED light bar from Larson Electronics produces a 550' long by 70' wide light beam with 2,160 lumens of
bright light. Twelve Edison EdixeonВ® Emitters containing CREE EZBrightВ® three watt LEDs producing 180 lumens each
are arranged in rows and paired with high purity 10 degree optics to produce a tightly focused spot beam with limited
spread or light spillage. We also offer optional floodlight versions with 35 degree optics to produce a wider beam spread
and more light over a larger area nearer the fixture, making flood versions ideal for use as work and area lights.
These LED light bars are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt and very
ruggedly constructed to withstand the most demanding environments, conditions and applications. The entire Larson
Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier housings, rubber isolated mounts
and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains, sand
and high winds.
11/18/2014
Page: 388
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This image shows a dark street, illuminated by nothing but distant street
lamps and suburban lighting.
The same street illuminated with the LEDLB-12ET, the beam easily reaches
the street light over 500' away.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 389
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many
manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an
extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to
produce the maximum amount of power and longevity from the integrated Edison EdixeonВ® Emitters. The end result is
more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels
regardless of input levels across a specific range. These LEDLB series light bars can operate on current ranging from 9 to
42VDC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and
standalone applications such as those found on commercial boats, heavy equipment and vehicles where power systems
don’t always operate with 12 volts and external generators, transformers or inverters are impractical.
LEDLB-12ET 35В° Flood Beam
(Opt)
LEDLB-12ET 10В° Spot Beam
(Stnd)
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to
withstand extremes of environmental and operating conditions. The LED lights with the �E’ part number designation are
designed for extreme durability and are larger and heavier than the standard LEDLB series lights and are nearly twice as
heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85
degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from
thick extruded aluminum and the lenses are unbreakable polycarbonate. The EdixeonВ® LEDs offer inherent LED resistance
to shocks and vibrations contributing to these units 15.6Grms rating of vibration tolerance. We recommend these LED lights
for high stress - high vibratory conditions, high humidity climates, very cold areas and rough saltwater conditions. They are
also well suited to environments where equipment is used in one temperature extreme and stored in another temperature
extreme.
Adjustable Mounting: The trunnion mounting design on the LEDLB-12ET allows for post-installation angle positioning.
This means that by loosening 2 thumb bolts located on either side of the light, the operator can adjust the positioning angle
of this light 270 degrees. Then he/she would simply have to tighten thumb bolts to lock the angle in place. No tools are
required for adjusting angle. We also offer a BC-2 bar clamp mounting system you can view here for even greater mounting
versatility.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are
terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and
LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED
lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible
combos) will have different Deutsch connectors.
11/18/2014
Page: 390
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-12ET LED Light Bar
LEDLB LED Features
LEDs: 12 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 8.25"-L 3"-H 3.56"-D
LEDs Driven At 80%
Watts: 36
-40 C~ +80C Operating Temp Range
Voltage: 9-42 VDC
Spot Beam: 550'L x 70'W
Flood Beam: 120'L x 100'W
RoHS Compliant
Weight: 4.6 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
LED Chip Op Temp -40C to +125C
Mounting: Trunniont
IP68 Rated Waterproof to 3 meters
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps: 3 (on 12 volts) 1.5 (on 24 volts)
Lumens: 2160
Special Orders- Requirements
LED Light Color: 6000K or 3000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Lux-Spot : @Lens: 192,900 @ 1 Meter 17,000
Lux-Flood : @Lens: 186,500 @ 1 Meter 1,930
CE Certified
3 year warranty replacement on this LED light. After 30 days, the customer
ships the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement.
Scroll Down to Purchase-
11/18/2014
Page: 391
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- SpecSheet French
- SpecSheet Arabic
- Dimensional Drawing
- Manual
- SpectrumChart
11/18/2014
Page: 392
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Infrared LED Light Emitter on Trunnion Mount 750/850/940nm 9-32VDC - 110'L X 45'W IR Beam - 12 Watts
Part #: LED3W-4RU-IR
Price: $459.00
LED Light Bar contains four 6-watt high powered Infrared LEDs providing 12 watts of LED light power, producing 720 lumens of
LED light and drawing only 1 amps on 12 volts. This LED emitter light runs on any voltage ranging from 9 Volts to 32 Volts. With
it's new design to include a U-bracket trunnion mount, this 12 watt LED IR emitter can be mounted on any flat surface while still
being able to adjust the angle after installation. Note that this fixture's beam can only be seen through the use of night vision
goggles. 750Nm, 850Nm or 940Nm versions. Flood configuration is available upon request.
BUY AMERICAN COMPLIANT
This LED light emitter bar light runs on any voltage ranging from 9 Volts to 32 Volts DC. This means that you can power this and visible
LED emitter light from any vehicle, equipment, ATV or boat electrical system. You do not need anything special to operate these multivoltage units, as an internal voltage regulator controls the power to the LEDs.
There is a one foot pigtail attached to the LED light terminated in a 2 pin Deutsch plug. A wiring harness attaches to the Deutsch socket on
the back of the LED light. The harness is terminated in a 2 pin Deutsch plug and includes 20 feet of cable, a relay and a toggle switch that
will operate on 12 or 24 volts. The wiring harness is not necessary for installation. Operators can use existing wiring and switches,
assuming they are rated for the amperage listed below.
A hinge style mounting bracket enables the operator to affix one portion of the hinge bracket to the mounting surface. Then, the operator
can set the angle and attach the upper portion of the hinge style mount to the light. The operator can then adjust the hinge bolt, once the
desired angle is set.
Spot Beam Optics Angle: 10 degrees (create a narrower, longer, distance oriented beam)
Flood Beam Optics Angle: 35 degrees (creates a shorter, wider, diffused beam)
Click here to see more information on the spot (narrow) and flood (wide) lens used in this LED light.
SPECIFICATIONS:
Length: 8.75 inches
Height: 2.75 inches
Depth: 2.5 inches
Weight: 3.4 pounds
11/18/2014
Page: 393
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Number of LEDs: 4
Individual LED Watts: 3 watts each LED
LED Maximum Lumen Output: 900 lumen per LED
LED Type: Seoul P7
Total LED Watts: 12 Watts
Volts: Accepts input voltage 9-32 Volts DC
Amps: 1 (on 12 volts) .5 amps (on 24 volts)
Lumens: 720 total
LED Light Color: Infrared
CRI: 70
Wavelength: 750nm, 850nm or 940nm
Housing Color: black or white available. Specialty colors available on request. Powder coat finish.
Housing material: Aluminum
Ambient Operating Temperature Range: -45В° C to 85В° C
Storage Temperature Range: -45В° C to 100В° C
Ingress Protection Rating: IP67 (water tight and dust tight)
Mean Lens Temperature: 100В° F
Mean Housing Temperature: 112В° F
Mounting Type: Hinge mounting for 180В° of possible position angles; Trunnion U-bracket mount for angle adjustability after installation.
3 year warranty replacement on this LED light (or LED bulbs for light fixtures with removable LED bulbs). After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect,
we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a
return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement.
11/18/2014
Page: 394
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
7 Watt Compact Aluminum LED Fixture for Hazardous Area Location Lighting - No Mounting Bracket
Part #: HAL-7W-LED-NB
Price: $454.08
11/18/2014
Page: 395
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The Larson Electronics HAL-7W-LED-NB is a low voltage hazardous area lighting solution approved for Class 1 Division 2
Environments and 1598 compliant for use in wet locations. This powerful LED light produces 604 lumens, operates from 12 or 24 VDC,
and is available in a variety of configurations to allow tailoring to the specific requirements of various applications.
The HAL-7W-LED-NB is designed to provide a high output and ruggedly durable lighting solution for applications where Class1 Division 2
compliance is required. This low voltage explosion proof light can be operated with either 12 or 24 volt DC current and includes 6 feet of
connecting lead with standard two wire configuration. This light is constructed of precision machined aluminum for excellent strength and
durability and is rated IP66 for ingress protection against dust and direct exposure to high pressure water spray.
The HAL-7W-LED-NB is available in a 30 degree spotlight beam configuration for distance and a 100 degree configuration for wide area
illumination, and a cool white color temperature for maximum illumination. The high output, cool running operation, and good color rendering
properties of this light make it an ideal replacement for older, bulkier, and less reliable incandescent and halogen lamps.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 396
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Durability/Mounting: The HAL-7W-LED-NB hazardous location LED light is constructed of machined aluminum for high strength and durability.
The housing is IP66 rated, providing protection against intrusion into the housing from dusts, dirt, oils and water directly sprayed on the housing
at high pressure. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty
conditions are commonly encountered.
The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree
LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life
than comparable LEDs.
The entire assembly weighs 2.3 lbs and measures only 3.47 inches in diameter and approximately 4-1/2 inches deep, making it ideal for
mounting in areas where space is limited and a heavy fixture cannot be installed due to lack of support.
Wiring/Power: These explosion proof LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting
configuration. These lights operate from 12 or 24 volt DC current at 7.9 watts 0.66 amps on 12 VDC and 8.4 Watts 0.35 amps on 24 VDC.
Versatility: The HAL-7W-LED-NB is ETL approved for Class 1 Division 2 groups A, B, C, and D locations. This unit carries an IP66 waterproof
rating ensuring protection against ingress from dusts, dirt, oils and water sprayed at high pressure directly on the fixture. This light is ideal for
indoor or outdoor applications and industrial operations with hazardous location classification where dusty or wet conditions are commonly
encountered.
These lights are also available in a 30 degree spotlight configuration for long beam length or 100 degree flood configuration for wide area
coverage.
Specifications / Additional Information
HAL-7W-LED-NB Explosion Proof LED
ETL Listed
Lamp Type: LED
Class 1 Division 2 Groups A,B,C,D
Dimensions: Lamp 3.47" Diam"- 4.50"-Depth 5.29" Height- w Bracket CSA 22.2 No. 250.0
Weight: 2.3 lb | 1.04 k g
1598
Watts: 7.9 W @ 12 VDC | 8.4 W @ 24 VDC
IP66 Ingress Protection
Voltage: 12-24 VDC
T3 Temperature Rating
Lumens: 604 - Scoptic Lumens: 1293
Lamp Life Expectancy: 100,000 Hours
CRI: 75
Amps: 0.66 A @12 VDC | 0.35 A @ 24 VDC
Light Color: 6500K
Special Orders- Requirements
Beam Type: 30В° Spot or 100В° Flood
Contact us for special requirements
Mounting: N/A
Toll Free: 1-800-369-6671
Temp Range: -40°C – +85°C
Intl: 1-903-498-3363
Wiring: 6Ft Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 397
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 398
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
40 Watt LED Light on Trunnion Adjustable Surface Mount - 3600 Lumen - 9-48VDC - 170'L X 130' Flood
Part #: LED10W-4RU-F
Price: $454.00
Buy American Compliant
The Larson Electronics LED10W-4RU-F LED Light offers high light output from a light weight, durable and water
tight fixture. This IP67 rated LED light bar includes a U-bracket trunnion mount allowing it to be mounted on any
flat surface while still being able to adjust the angle after installation and produces 3600 lumens of light while
drawing only 3.3 amps on 12 volts. This light can run on any voltage from 9 to 48 volts and provides a durable and
powerful lighting solution that is ideal for use in industrial and commercial applications such as machine vision
system lighting, security illumination and vehicle lighting applications.
The LED10W-4RU-F LED light bar from Larson Electronics produces a 3,600 lumens of bright light while drawing only 40
watts @3.3amps from a 12 volt electrical system. Four Seoul Z-Power-10 watt LEDs producing a maximum of 900 lumens
each are arranged in rows and paired with 35 degree optics to produce a wide flood beam approximately 170 feet in length
by 130 feet wide. We also offer optional spotlight versions with 10 degree optics to produce a beam 390' long by 90' wide.
These LED light bars are IP67 rated and waterproof to 1 meter, sealed against intrusion by dust and dirt and constructed to
withstand the demanding conditions found in marine environments.
11/18/2014
Page: 399
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LED10W-4RU-F unit used as headlights
Dark road with a street lamp positioned
approximately 525' away
Click Photo to Enlarge
The same road illuminated with the LED10W-4RU
-F
Click Photo to Enlarge
11/18/2014
Page: 400
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the output of their
LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an advanced heat radiating fin
design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated Seoul Z-Power 10 watt LEDs. The
end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units contain an internal voltage regulator which allows them to adjust input current to provide the correct LED voltage levels
regardless of input levels from 9 to 50 VDC. These LED10W series light bars can operate on current ranging from 9 to 50VDC without any modifications
necessary as a result. This multi-voltage capability makes these units ideal for mobile and stand alone applications such as those found on boats and
vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are impractical.
LED10W-4RU-F 35В° Flood Beam
(Stnd)
LED10W-4RU-F 10В° Spot Beam
(Opt)
Durability: The LED10W series of LED light bars from Larson Electronics offer IP67 rated construction that is designed to withstand demanding
environmental and operating conditions. These LED lights are designed for low profile mounting options, allowing them to be used in spaces where room
is at a premium. They offer extruded aluminum housings, stainless steel hardware and polycarbonate lenses that provide good durability, yet are slimmer
and lighter than extreme duty LEDLB-E series lights. These units can operate in temperatures ranging from -40 degrees Celsius to 80 degrees Celsius,
are waterproof to 1 meter and are sealed against the ingress of dust, dirt and humidity. The Seoul Z-Power 10 watt LEDs offer inherent LED resistance to
shocks and vibrations, contributing to these unit’s 8.6G rating of vibration tolerance.
Mounting: These LED light bars incorporate a hinge style mounting bracket design that provides 180 degrees of adjustability and allows the operator to
attach one portion of the hinge bracket to the mounting surface first. The operator can then set the desired angle and attach the upper portion of the hinge
style mount to the light. The operator then adjusts and tightens the hinge bolt to lock the light bar into position once the desired angle is set. This particular
unit includes a U bracket trunnion mount which allows the fixture to be mounted to walls or any flat surface while retaining the unit's angle adjustability.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD /
LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a
harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low
beam, modulating, IR/Visible combos) will have different Deutsch connectors.
On this particular unit there is a one foot pigtail attached to the LED light terminating in a 2 pin Deutsch plug. A wiring harness attaches to the Deutsch
socket on the back of the LED light. The harness is terminated in a 2 pin Deutsch plug and includes 20 feet of cable, a relay and a toggle switch that will
operate on 12 or 24 volts. The wiring harness is not necessary to installation. Operators can use existing wiring and switches, assuming they are rated for
the amperage listed below.
11/18/2014
Page: 401
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LED10W-4RU-F LED Light Bar
LED10W-4RU-F LED Features
LEDs: Seoul Z-Power 10 Watt LEDs
Seoul Z-Power 10 Watt LEDs
Dimensions: 8.75"-L 2.75"-H 2.5"-D
LEDs Driven At 80%
Watts: 40
-40 C~ +80C Operating Temp Range
Voltage: 9-48 VDC
Spot Beam: 170'L x 30'W
900 Lumens per LED
Weight: 3.4 Lbs
70% Lumen Retention @50,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
IP67 Rated Waterproof to 1 meter
Mounting: Adjustable U-Mount Bracket
Download Spot and Flood Beam Specs
Wiring: 2 pin Deutsch plug
Amps: 3.3 (on 12 volts) 2.5 (on 24 volts)
Lumens: 3,600
Special Orders- Requirements
LED Light Color: 6300K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 80%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Lux At The Lens: 193,700
Lux At 1 Meter: 3,120
CRI: 70
CE Certified
EN55015 EMI
EN61547 EMS
EN62471 Photobiological Safety
3 year warranty replacement on this LED light. After 30 days, the customer
ships the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement.
Scroll Down to Purchase-
11/18/2014
Page: 402
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Manual
11/18/2014
Page: 403
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LED Light Emitter on Trunnion Wall Mount - 8, 3-Watt LEDs - 24 Watt - Precise Pulsing Control
Part #: LEDLB-8ET-SD-HPV
Price: $428.50
Buy American Compliant
The Larson Electronics LEDLB-8ET-SD-HPV LED Light Bar offers high light output and extreme durability combined a versatile
trunnion mounting system that allows mounting to walls and provides 270 degrees of adjustability. This IP68 rated LED light bar is
waterproof to three meters and produces 1,440 lumens while drawing only 24 watts of power @2 amps from a 12 volt electrical system.
This light can run on any voltage from 9 to 42 volts and provides an extremely rugged lighting solution that is ideal for use in
commercial marine environments as well as industrial applications such as machine vision system lighting, heavy equipment
illumination, blasting lighting and mining operations.
The LEDLB-8ET-SD-HPV LED light bar from Larson Electronics produces a 325' long by 70' wide light beam with 1440 lumens of bright light.
Eight Edison EdixeonВ® Emitters containing CREE EZBrightВ® three watt LEDs producing 180 lumens each are arranged in rows and paired with
high purity 10 degree optics to produce a tightly focused spot beam with limited spread or light spillage. We also offer optional floodlight versions
with 35 degree optics to produce a wider beam spread and more light over a larger area nearer the fixture, making flood versions ideal for use as
work and area lights. These LED light bars are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly
constructed to withstand the most demanding environments, conditions and applications.
The entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier housings, rubber isolated mounts and
unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains, sand and high winds.
This LED light contains a specially designed board that enables operators to feed a pulse train or variable voltage to produce custom strobe
sequences or various dimming scenarios. These LED lights are dimmable down to 2 percent, while most of our LED lights are only dimmable to
11% with our standard PWM (PWM-6). For example, using a variable voltage power supply, operators can feed a 7Hz pulse to the light and get
7Hz flash rate out.
The spectrum bandwidth charts, defining center frequency are available for download. We are able to provide designers and operators precise
control over the light while maintaining integrated drivers that continue to protect and optimize the LED package functionality with a separate
control wire. If the green control wire is disconnected or grounded the lamp operates normally. If a voltage between1.8 to 40V positive relative to
ground is applied to the control wire the lamp will turn off.
The control wire input can be used for pulsing with a pulsing frequency range of DC to 1kHz with duty cycle range of 0 to 98% at 1kHz. Control
input is inverted with a Pulse Width Modulator (PWM), for example if you applied a 90% PWM signal to the control pin, the lamp would be on for
10% of the time.
11/18/2014
Page: 404
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This image shows a dark street, illuminated by nothing but distant
The same street illuminated with the LEDLB-8E, easily reaching the
street lamps and suburban lighting.
tree and illuminating it's branches over 110 yards away. .
Click Photo to Enlarge
Click Photo to Enlarge
*We have had excellent feedback from boat builders and other marine applications where they are able to create lighting effects on the mast, etc.
that typically cost 10 times as much but with little amp draw. The efficiency of the driver board makes this type of amp draw attractive for current
constrained applications including small equipment, ATVs, boats and other applications where banks of batteries without significant alternator
support are the sole source of power. These units are also ideal for use in manufacturing and industrial operations as machine lighting where
severe vibration and excessive amounts of dirt and grime may be encountered.
11/18/2014
Page: 405
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Edison EdixeonВ® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels
across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as
a result. This multi-voltage capability makes these units ideal for mobile and stand alone applications such as those found on commercial boats,
heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are
impractical.
LEDLB-8ET-SD-HPV 35В° Flood Beam (Opt)
LEDLB-8ET-SD-HPV 10В° Spot Beam (Stnd)
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of
environmental and operating conditions. The LED lights with the �E’ part number designation are designed for extreme durability and are larger
and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85
degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded
aluminum and the lenses are unbreakable polycarbonate. The EdixeonВ® LEDs offer inherent LED resistance to shocks and vibrations
contributing to these units 15.6Grms rating of vibration tolerance.
We recommend these LED lights for high stress - high vibratory conditions, high humidity climates, very cold areas and rough saltwater
conditions. They are also well suited to environments where equipment is used in one temperature extreme and stored in another temperature
extreme.
Adjustable Mounting: The trunnion mounting design on the LEDLB-8ET allows for post-installation angle positioning. This means that by
loosening 2 thumb bolts located on either side of the light, the operator can adjust the positioning angle of this light 270 degrees. Then he/she
would simply have to tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle. We also offer a BC-2 bar clamp
mounting system you can view here for even greater mounting versatility.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as
part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
11/18/2014
Page: 406
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-8ET-SD-HPV LED Light Bar
LEDLB LED Features
LEDs: 8 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 6.25"-L 3"-H 3.56"-D
LEDs Driven At 80%
Watts: 24
-40 C~ +80C Operating Temp Range
Voltage 9-46 VDC
RoHS Compliant
Spot Beam: 325'L x 70'W
70% Lumen Retention @65,000 hours
Flood Beam: 100'L x 85'W
LED Chip Op Temp -40C to +125C
Weight: 3.4 Lbs
IP68 Rated Waterproof to 3 meters
Lighting Configuration: 10В° Spot or 35В° Flood
Mounting: Trunnion Bracket
Wiring: Deutsch IPD / LADD DT04-2P connector
Special Orders- Requirements
Amps:2 (on 12 volts) 1 (on 24 volts)
Contact us for special requirements
Lumens: 1440
Toll Free: 1-800-369-6671
LED Light Color: 6000K
Intl: 1-903-498-3363
LED Life Expectancy: 50,000 hours
E-mail: [email protected]
Optics Efficiency: 90%
Materials: Aluminum Housing, Polycarbonate Lens
Housing Colors: Black or White
Lux-Spot : @Lens: 188,900 @ 1 Meter 12,860
CE Certified
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
Links (Click on the below items to view):
- Manual
11/18/2014
Page: 407
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Compact 7 Watt LED Fixture for Industrial Lighting - Aluminum Housing - 12-28VDC - IP66 Waterproof
Part #: GAU-7W-LED
Price: $403.20
Buy American Compliant
The Larson Electronics GAU-7W-LED is a low voltage industrial lighting solution approved for outdoor environments and IP66
waterproof for use in wet locations. This powerful LED light produces 587 lumens, operates from 12 or 24 VDC, and is available in a
variety of configurations to allow tailoring to the specific requirements of various applications.
The GAU-7W-LED is designed to provide a high output and ruggedly durable lighting solution for applications where corrosion resistance and
waterproof light fixtures are required. This low voltage industrial LED light can be operated with either 12 or 24 volt DC current and includes 6
feet of connecting lead with standard two wire configuration. This light is constructed of precision machined aluminum for excellent strength and
durability, clear anodized for corrosion resistance, and is rated IP66 for ingress protection against dust and direct exposure to high pressure
water spray.
The GAU-7W-LED is also available in a 30 degree spotlight beam configuration for distance and a 100 degree configuration for wide area
illumination. The light output is offered in cool white, neutral white, and warm white color temperatures for maximum illumination. The high output,
cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable
incandescent and halogen lamps.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Click Photo to Enlarge
Page: 408
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Durability: The GAU-7W-LED industrial grade LED light is constructed of machined aluminum for high strength and durability with a clear
anodized finish for increased corrosion resistance. The housing is IP66 rated, providing protection against intrusion into the housing from dusts,
dirt, oils and water directly sprayed on the housing at high pressure. This LED light is equipped with an impact resistant acrlyic lens for increased
safety compared to glass lenses. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness
or dusty conditions are commonly encountered.
High Output LEDs: The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme
long life. These Cree LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 100,000 hours, giving them better
efficiency and operational life than comparable LEDs. These lights are equipped with high purity optics and available in a 30 degree spotlight
configuration for long beam length or 100 degree flood configuration for wide area coverage. Utilizing an acrylic lens, this fixture produces a
higher light output than similar fixtures equipped with thicker glass lenses. The GAU-7W-LED has multiple color temperature options and is
offered in 6500K cool white with a color rendering of 75, 4300K neutral white with a color rendering of 75, and 3500K warm white with a color
rendering of 80.
Mounting: Mounting for this unit is provided by an included aluminum yoke that allows vertical adjustment of the light once installed. The
mounting yoke is predrilled with two Вј inch holes spaced 1-1/2 inches apart for easy and secure mounting to flat surfaces. The entire assembly
weighs 2.3 lbs and measures only 3.47 inches in diameter and approximately 4-1/2 inches deep, making it ideal for mounting in areas where
space is limited and a heavy fixture cannot be installed due to lack of support.
Wiring/Power: These industrial LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting
configuration. These lights operate from 12 or 24 volt DC current at 7.9 watts 0.66 amps on 12 VDC and 8.4 Watts 0.35 amps on 24 VDC.
Versatility:The GAU-7W-LED is ETL listed, certified to CSA 22.2 No. 250.0, and conforms to UL 1598. This unit carries an IP66 waterproof
rating ensuring protection against ingress from dusts, dirt, oils and water sprayed at high pressure directly on the fixture. This light is ideal for
indoor or outdoor applications and industrial operations where dusty or wet conditions are commonly encountered.
11/18/2014
Page: 409
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
GAU-7W-LED Industrial LED Light
ETL Listed
Lamp Type: LED
CSA 22.2 No. 250.0
Lamp Dimensions (w/o Bracket): 3.47" Diam" x 4.44"-Depth
UL 1598
Lamp Dimensions (w/ Bracket): 4.87"-H x 4.22" W
IP66 Ingress Protection
Weight: 2.3 lb | 1.04 k g
T3 Temperature Rating
Watts: 7.9 W @ 12 VDC | 8.4 W @ 24 VDC
LM-80 > 60,500 hrs (based on Cree long term tests)
Voltage: 12-28 VDC
Lumens: Spot: 587 - Flood: 459
Lamp Life Expectancy: 100,000 Hours
CRI: CW: 75, NW: 75, WW: 80
Amps: 0.66 A @12 VDC | 0.35 A @ 24 VDC
Light Color: CW: 6500K, NW: 4300K, WW: 3500K
Beam Type: 30В° Spot or 100В° Flood
Mounting: 1/4” - 20 Screws /Aluminum Yoke
Materials: Machined aluminum housing - acrylic lens
Special Orders- Requirements
Housing Finish: Clear anodized finish
Contact us for special requirements
Temp Range: -40В°C to +85В°C
Toll Free: 1-800-369-6671
Typical Case Temperature: ~20В°C above ambient temperature
Intl: 1-903-498-3363
Wiring: 6Ft Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 410
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 411
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
11/18/2014
Page: 412
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Compact 7 Watt LED Fixture for Industrial Lighting - Royal Blue LEDs - Aluminum Housing - 12-28VDC
Part #: GAU-7W-LED-BLUE
Price: $403.20
Buy American Compliant
The Larson Electronics GAU-7W-LED-BLUE is a low voltage industrial lighting solution approved for outdoor environments and IP66
waterproof for use in wet locations. This powerful LED light produces 587 lumens, operates from 12 or 24 VDC, and is available in a
variety of configurations to allow tailoring to the specific requirements of various applications.
The GAU-7W-LED-BLUE is designed to provide a high output and ruggedly durable lighting solution for applications where corrosion resistance
and waterproof light fixtures are required. This low voltage industrial blue LED light can be operated with either 12 or 24 volt DC current and
includes 6 feet of connecting lead with standard two wire configuration. This light is constructed of precision machined aluminum for excellent
strength and durability, clear anodized for corrosion resistance, and is rated IP66 for ingress protection against dust and direct exposure to high
pressure water spray.
The GAU-7W-LED-BLUE is also available in a 30 degree spotlight beam configuration for distance and a 100 degree configuration for wide area
illumination. This light has a blue light output (for visible white please see the GAU-7W-LED industrial grade light fixture). The high output, cool
running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable incandescent
and halogen lamps.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 413
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Durability: The GAU-7W-LED-BLUE industrial grade LED light is constructed of machined aluminum for high strength and durability with a clear
anodized finish for increased corrosion resistance. The housing is IP66 rated, providing protection against intrusion into the housing from dusts,
dirt, oils and water directly sprayed on the housing at high pressure. This LED light is equipped with an impact resistant acrlyic lens for increased
safety compared to glass lenses. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness
or dusty conditions are commonly encountered.
High Output LEDs: The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme
long life. These Cree LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 100,000 hours, giving them better
efficiency and operational life than comparable LEDs. These lights are equipped with high purity optics and available in a 30 degree spotlight
configuration for long beam length or 100 degree flood configuration for wide area coverage. Utilizing an acrylic lens, this fixture produces a
higher light output than similar fixtures equipped with thicker glass lenses. The GAU-7W-LED has multiple color options. This particular fixture is
fitted with blue LEDs to produce a vivid royal blue output. Please contact us for special color outputs.
Mounting: Mounting for this unit is provided by an included aluminum yoke that allows vertical adjustment of the light once installed. The
mounting yoke is predrilled with two Вј inch holes spaced 1-1/2 inches apart for easy and secure mounting to flat surfaces. The entire assembly
weighs 2.3 lbs and measures only 3.47 inches in diameter and approximately 4-1/2 inches deep, making it ideal for mounting in areas where
space is limited and a heavy fixture cannot be installed due to lack of support.
Wiring/Power: These industrial LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting
configuration. These lights operate from 12 or 24 volt DC current at 7.9 watts 0.66 amps on 12 VDC and 8.4 Watts 0.35 amps on 24 VDC.
Versatility:The GAU-7W-LED is ETL listed, certified to CSA 22.2 No. 250.0, and conforms to UL 1598. This unit carries an IP66 waterproof
rating ensuring protection against ingress from dusts, dirt, oils and water sprayed at high pressure directly on the fixture. This light is ideal for
indoor or outdoor applications and industrial operations where dusty or wet conditions are commonly encountered.
11/18/2014
Page: 414
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
GAU-7W-LED-BLUE Industrial LED Light
ETL Listed
Lamp Type: LED
CSA 22.2 No. 250.0
Lamp Dimensions (w/o Bracket): 3.47" Diam" x 4.44"-Depth
UL 1598
Lamp Dimensions (w/ Bracket): 4.87"-H x 4.22" W
IP66 Ingress Protection
Weight: 2.3 lb | 1.04 k g
T3 Temperature Rating
Watts: 7.9 W @ 12 VDC | 8.4 W @ 24 VDC
LM-80 > 60,500 hrs
Voltage: 12-28 VDC
Lumens: Spot: 587 - Flood: 459
Lamp Life Expectancy: 100,000 Hours
CRI: N/A
Amps: 0.66 A @12 VDC | 0.35 A @ 24 VDC
Light Color: Blue
Beam Type: 30В° Spot or 100В° Flood
Mounting: 1/4” - 20 Screws /Aluminum Yoke
Materials: Machined aluminum housing - acrylic lens
Special Orders- Requirements
Housing Finish: Clear anodized finish
Contact us for special requirements
Temp Range: -40В°C to +85В°C
Toll Free: 1-800-369-6671
Typical Case Temperature: ~20В°C above ambient temperature
Intl: 1-903-498-3363
Wiring: 6Ft Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 415
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 416
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
11/18/2014
Page: 417
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Compact 7 Watt LED Fixture for Industrial Lighting - Aluminum Housing - 12-28VDC - IP66 Waterproof
Part #: CANLED-GEN
Price: $403.20
Buy American Compliant
The Larson Electronics CANLED-GEN is a low voltage industrial lighting solution approved for outdoor environments and IP66
waterproof for use in wet locations. This powerful LED light produces 587 lumens, operates from 12 or 24 VDC, and is available in a
variety of configurations to allow tailoring to the specific requirements of various applications.
The CANLED-GEN is designed to provide a high output and ruggedly durable lighting solution for applications where corrosion resistance and
waterproof light fixtures are required. This low voltage industrial LED light can be operated with either 12 or 24 volt DC current and includes 6
feet of connecting lead with standard two wire configuration. This light is constructed of precision machined aluminum for excellent strength and
durability, clear anodized for corrosion resistance, and is rated IP66 for ingress protection against dust and direct exposure to high pressure
water spray.
The CANLED-GEN is also available in a 30 degree spotlight beam configuration for distance and a 100 degree configuration for wide area
illumination. The light output is offered in cool white, neutral white, and warm white color temperatures for maximum illumination. The high output,
cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable
incandescent and halogen lamps.
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Click Photo to Enlarge
Page: 418
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Durability: The CANLED-GEN industrial grade LED light is constructed of machined aluminum for high strength and durability with a clear
anodized finish for increased corrosion resistance. The housing is IP66 rated, providing protection against intrusion into the housing from dusts,
dirt, oils and water directly sprayed on the housing at high pressure. This LED light is equipped with an impact resistant acrlyic lens for increased
safety compared to glass lenses. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness
or dusty conditions are commonly encountered.
High Output LEDs: The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme
long life. These Cree LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 100,000 hours, giving them better
efficiency and operational life than comparable LEDs. These lights are equipped with high purity optics and available in a 30 degree spotlight
configuration for long beam length or 100 degree flood configuration for wide area coverage. Utilizing an acrylic lens, this fixture produces a
higher light output than similar fixtures equipped with thicker glass lenses. The CANLED-GEN has multiple color temperature options and is
offered in 6500K cool white with a color rendering of 75, 4300K neutral white with a color rendering of 75, and 3500K warm white with a color
rendering of 80.
Mounting: Mounting for this unit is provided by an included aluminum yoke that allows vertical adjustment of the light once installed. The
mounting yoke is predrilled with two Вј inch holes spaced 1-1/2 inches apart for easy and secure mounting to flat surfaces. The entire assembly
weighs 2.3 lbs and measures only 3.47 inches in diameter and approximately 4-1/2 inches deep, making it ideal for mounting in areas where
space is limited and a heavy fixture cannot be installed due to lack of support.
Wiring/Power: These industrial LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting
configuration. These lights operate from 12 or 24 volt DC current at 7.9 watts 0.66 amps on 12 VDC and 8.4 Watts 0.35 amps on 24 VDC.
Versatility:The CANLED-GEN is ETL listed, certified to CSA 22.2 No. 250.0, and conforms to UL 1598. This unit carries an IP66 waterproof
rating ensuring protection against ingress from dusts, dirt, oils and water sprayed at high pressure directly on the fixture. This light is ideal for
indoor or outdoor applications and industrial operations where dusty or wet conditions are commonly encountered.
11/18/2014
Page: 419
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
CANLED-GEN Industrial LED Light
ETL Listed
Lamp Type: LED
CSA 22.2 No. 250.0
Lamp Dimensions (w/o Bracket): 3.47" Diam" x 4.44"-Depth
UL 1598
Lamp Dimensions (w/ Bracket): 4.87"-H x 4.22" W
IP66 Ingress Protection
Weight: 2.3 lb | 1.04 k g
T3 Temperature Rating
Watts: 7.9 W @ 12 VDC | 8.4 W @ 24 VDC
LM-80 > 60,500 hrs (based on Cree long term tests)
Voltage: 12-28 VDC
Lumens: Spot: 587 - Flood: 459
Lamp Life Expectancy: 100,000 Hours
CRI: CW: 75, NW: 75, WW: 80
Amps: 0.66 A @12 VDC | 0.35 A @ 24 VDC
Light Color: CW: 6500K, NW: 4300K, WW: 3500K
Beam Type: 30В° Spot or 100В° Flood
Mounting: 1/4” - 20 Screws /Aluminum Yoke
Materials: Machined aluminum housing - acrylic lens
Special Orders- Requirements
Housing Finish: Clear anodized finish
Contact us for special requirements
Temp Range: -40В°C to +85В°C
Toll Free: 1-800-369-6671
Typical Case Temperature: ~20В°C above ambient temperature
Intl: 1-903-498-3363
Wiring: 6Ft Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 420
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 421
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 422
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LED Light Emitter w/ Trunnion Mount - 200lb Grip Magnetic Base - 325'L X 70'W Spot Beam - 1440 Lumen
Part #: LEDLB-8ET-M
Price: $371.18
Buy American Compliant
The Larson Electronics LEDLB-8ET-M LED Light Bar offers high light output and extreme durability combined with a versatile magnetic
trunnion mounting system that provides magnetic mounting convenience and 270 degrees of adjustability. This IP68 rated LED light
bar is waterproof to three feet and produces 1,440 lumens while drawing only 24 watts of power @2 amps from a 12 volt electrical
system. This light can run on any voltage from 9 to 42 volts and comes equipped with a 16ft coil cord ending in a cigarette plug
connector which makes this unit easy to install and remove and ideal for use on vehicles, equipment and boats.
The LEDLB-8ET-M LED light bar from Larson Electronics produces a 325' long by 70' wide light beam with 1440 lumens of bright light. Eight
Edison EdixeonВ® Emitters containing CREE EZBrightВ® three watt LEDs producing 180 lumens each are arranged in rows and paired with high
purity 10 degree optics to produce a tightly focused spot beam with limited spread or light spillage. We also offer optional floodlight versions with
35 degree optics to produce a wider beam spread and more light over a larger area nearer the fixture, making flood versions ideal for use as
work and area lights. These LED light bars are IP68 rated and waterproof to 3 feet, sealed against intrusion by dust and dirt and very ruggedly
constructed to withstand the most demanding environments, conditions and applications.
The entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier housings, rubber isolated mounts and
unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains, sand and high winds. This light
is equipped with a 200lbs grip magnetic mount base and 16 foot coil cord ending in a cigarette plug connector. This magnetic base allows fast
and easy setup of this light on vehicles and equipment and will hold the fixture in place at speeds up to 70mph provided the mount is properly
affixed and secure.
11/18/2014
Page: 423
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This image shows a dark street, illuminated by nothing but distant
The same street illuminated with the LEDLB-8E, easily reaching the
street lamps and suburban lighting.
tree and illuminating it's branches over 110 yards away. .
Click Photo to Enlarge
Click Photo to Enlarge
*We have had excellent feedback from boat builders and other marine applications where they are able to create lighting effects on the mast, etc.
that typically cost 10 times as much but with little amp draw. The efficiency of the driver board makes this type of amp draw attractive for current
constrained applications including small equipment, ATVs, boats and other applications where banks of batteries without significant alternator
support are the sole source of power. These units are also ideal for use in manufacturing and industrial operations as machine lighting where
severe vibration and excessive amounts of dirt and grime may be encountered.
11/18/2014
Page: 424
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Edison EdixeonВ® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels
across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as
a result. This multi-voltage capability makes these units ideal for mobile and standalone applications such as those found on commercial boats,
heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are
impractical.
LEDLB-8ET-M 35В° Flood Beam
(Opt)
LEDLB-8ET-M 10В° Spot Beam
(Stnd)
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of
environmental and operating conditions. The LED lights with the �E’ part number designation are designed for extreme durability and are larger
and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85
degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded
aluminum and the lenses are unbreakable polycarbonate. The EdixeonВ® LEDs offer inherent LED resistance to shocks and vibrations
contributing to these units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions,
high humidity climates, very cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in
one temperature extreme and stored in another temperature extreme.
Adjustable Magnetic Mounting: The 200 lbs magnet, cigarette cord and trunnion mounting design on the LEDLB-8ET-M allows for easy fixture
placement and post-placement angle positioning. This means that by loosening 2 thumb bolts located on either side of the light, the operator can
adjust the positioning angle of this light 270 degrees. Then he/she would simply have to tighten thumb bolts to lock the angle in place. No tools
are required for adjusting angle. This mounting system makes this unit ideal for vehicle and equipment lighting applications where the unit can
simply be attached or removed as needed. Please note, the magnetic base on this unit increases the unit's overall height.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as
part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
11/18/2014
Page: 425
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-8ET-M LED Light Bar
LEDLB LED Features
LEDs: 8 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 6.25"-L 3"-H 3.56"-D
LEDs Driven At 80%
Watts: 24
-40 C~ +80C Operating Temp Range
Voltage: 9-46 VDC
Spot Beam: 325'L x 70'W
RoHS Compliant
Flood Beam: 100'L x 85'W
Weight: 3.4 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
LED Chip Op Temp -40C to +125C
Mounting: Stud Bracket
IP68 Rated Waterproof to 3 meters
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps:2 (on 12 volts) 1 (on 24 volts)
Lumens: 1440
Special Orders- Requirements
LED Light Color: 6000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Lux-Spot : @Lens: 188,900 @ 1 Meter 12,860
Lux-Flood : @Lens: 185,800 @ 1 Meter 8,440
CE Certified
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 426
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- SpecSheet French
- SpecSheet Arabic
- Manual
11/18/2014
Page: 427
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
8 Watt LED Light Fixtures for Hazardous Location Illumination - 13.4" Low Voltage Light Fixture - Cl
Part #: GSLEDIP12-C1D2
Price: $370.80
Buy American Compliant
The Larson Electronics GSLEDIP12 is a low voltage hazardous location lighting solution approved for Class1 Division 2 environments
and U.L. 1598 compliant for use in wet locations. This powerful LED strip light produces 442 lumens, operates from 12 or 24 VDC, and
is suitable for a variety of applications.
The GSLEDIP12 is designed to provide a high output and ruggedly durable lighting solution for applications where Class 1 Division 2 compliance
is required. This low voltage hazardous area light can be operated with either 12 or 24 volt DC (choose below) current and includes 6 feet of
connecting lead with standard two wire configuration. This light is constructed of powder coated extruded aluminum for excellent strength and
durability and is rated IP54 for protection against exposure to water spray and limited dust ingress. These units are configured in a 13" long strip
or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool running operation, and good
color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable incandescent and halogen light fixtures.
Durability/Mounting: The GSLEDIP12 hazardous location LED light is constructed of extruded aluminum with a tough powder coat finish for
high strength and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and l protection against light water
spray such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty
conditions are commonly encountered.
The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree
LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life
than comparable LEDs.
Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust
the light vertically for the best placement. The entire assembly weighs 0.7 lbs and measures 13.4 inches in length and 2.68 inches wide and
1.69" deep, making it ideal for mounting in areas where space is limited and a low profile fixture more readily installed.
Wiring/Power: These hazardous location LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting
configuration. These lights are not multi-voltage; each light is preconfigured for 12 or 24 volt DC current at 8 watts .66 amps on 12 VDC and .33
amps on 24 VDC.
Versatility: The GSLEDIP12 is ETL approved for Class 1 Division 2 groups A,B,C and D locations. This unit carries an IP56 waterproof rating
ensuring protection against limited ingress from dusts, dirt, oils and full protection against water sprayed at high pressure directly on the fixture.
This light is ideal for indoor or outdoor applications and industrial operations with hazardous location classification where dusty or wet conditions
are commonly encountered.
11/18/2014
Page: 428
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
GSLEDIP12 Hazardous Location LED Lighting
ETL Listed
Lamp Type: LED
Class 1 Division 2 Groups A,B,C,D
Dimensions: Lamp 13.38"-L 2.68" -W 1.69"- D
CSA 22.2 No. 250.0
Weight: 0.7lb | 0.3 k g
1598
Watts: 8.4
IP54 Ingress Protection
Voltage: 12-24 VDC
T3 Temperature Rating
Lumens: 442
Lamp Life Expectancy: 100,000 Hours
CRI: 75
Amps: 0.66 A @12 VDC | 0.33 A @ 24 VDC
Light Color: 6500K
Special Orders- Requirements
Beam Type: 100В° Flood or 30В° Spot
Contact us for special requirements
Mounting: 1/4” - 20 Screws /Aluminum 1” Yoke
Toll Free: 1-800-369-6671
Temp Range: -40°C – +85°C
Intl: 1-903-498-3363
Wiring: 6Ft Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 429
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 430
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LED Light Emitter - 8 LEDs - Red Illumination - 36 Watts - 1200 Lumens - 150'L X 30'W Spot Beam
Part #: LEDLB-8ET-RED
Price: $359.19
Buy American Compliant
The Larson Electronics LEDLB-8ET-RED LED Light Bar offers high light output and extreme durability combined a versatile trunnion
mounting system that allows mounting to walls and provides 270 degrees of adjustability. This IP68 rated LED light bar is waterproof
to three meters and produces 1,200 lumens while drawing only 24 watts of power @2 amps from a 12 volt electrical system. This light
can run on any voltage from 9 to 42 volts and provides an extremely rugged lighting solution that is ideal for use in commercial marine
environments as well as industrial applications such as machine vision system lighting, heavy equipment illumination, blasting
lighting and mining operations.
The LEDLB-8ET LED light bar from Larson Electronics produces a 150' long by 30' wide light beam with 1200 lumens of bright light. Eight Edison
EdixeonВ® Emitters containing CREE EZBrightВ® three watt LEDs producing 150 lumens each are arranged in rows and paired with high purity 10
degree optics to produce a tightly focused spot beam with limited spread or light spillage. We also offer optional floodlight versions with 35
degree optics to produce a wider beam spread and more light over a larger area nearer the fixture, making flood versions ideal for use as work
and area lights. These LED light bars are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly
constructed to withstand the most demanding environments, conditions and applications.
The entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier housings, rubber isolated mounts and
unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains, sand and high winds.
*We have had excellent feedback from boat builders and other marine applications where they are able to create lighting effects on the mast, etc.
that typically cost 10 times as much but with little amp draw. The efficiency of the driver board makes this type of amp draw attractive for current
constrained applications including small equipment, ATVs, boats and other applications where banks of batteries without significant alternator
support are the sole source of power. These units are also ideal for use in manufacturing and industrial operations as machine lighting where
severe vibration and excessive amounts of dirt and grime may be encountered.
11/18/2014
Page: 431
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Edison EdixeonВ® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels
across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as
a result. This multi-voltage capability makes these units ideal for mobile and stand alone applications such as those found on commercial boats,
heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are
impractical.
LEDLB-8ET-RED 35В° Flood Beam
(Opt)
LEDLB-8ET-RED 10В° Spot Beam
(Stnd)
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of
environmental and operating conditions. The LED lights with the �E’ part number designation are designed for extreme durability and are larger
and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85
degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded
aluminum and the lenses are unbreakable polycarbonate. The EdixeonВ® LEDs offer inherent LED resistance to shocks and vibrations
contributing to these units 15.6Grms rating of vibration tolerance.
We recommend these LED lights for high stress - high vibratory conditions, high humidity climates, very cold areas and rough saltwater
conditions. They are also well suited to environments where equipment is used in one temperature extreme and stored in another temperature
extreme.
Adjustable Mounting: The trunnion mounting design on the LEDLB-8ET allows for post-installation angle positioning. This means that by
loosening 2 thumb bolts located on either side of the light, the operator can adjust the positioning angle of this light 270 degrees. Then he/she
would simply have to tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle. We also offer a BC-2 bar clamp
mounting system you can view here for even greater mounting versatility.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as
part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
11/18/2014
Page: 432
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-8ET-RED LED Light Bar
LEDLB LED Features
LEDs: 8 Red 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 6.25"-L 3"-H 3.56"-D
LEDs Driven At 80%
Watts: 24
-40 C~ +80C Operating Temp Range
Voltage: 9-46 VDC
Spot Beam: 150'L x 30'W
RoHS Compliant
Flood Beam: 90'L x 65'W
Weight: 3.4 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
LED Chip Op Temp -40C to +125C
Mounting: Trunnion Bracket
IP68 Rated Waterproof to 3 meters
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps:2 (on 12 volts) 1 (on 24 volts)
Lumens: 1200
Special Orders- Requirements
LED Light Color: Red
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
CE Certified
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 433
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 434
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Low Bay LED Light - 250W Metal Halide Equivalent - 12 LEDs - 40 Watt High Output LEDs
Part #: GAU-LB-400
Price: $358.00
11/18/2014
Page: 435
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in USA Compliant
The GAU-LB-400 LED Low Bay Light offers high light output from a compact form factor and is designed to provide a more durable
and long lived alternative to halogen and metal halide units. This 40 watt LED light produces illumination comparable to a 250
watt metal halide unit without the high heat, fragile construction, or high energy costs of incandescent lighting.
The Larson Electronics GAU-LB-400 LED low bay light produces a long flood beam of light while drawing only 40 watts @.45 amps at 120 VAC.
The light assembly consists of twelve LEDs paired with high purity specular optics to produce a light output comparable to that of a 250 watt
metal halide. This LED wall pack is designed to withstand demanding conditions and is waterproof, vapor proof, and built to resist the damaging
effects of an outdoor environment.
Dark warehouse,
illuminated by 100W incandescent bulb.
Same warehouse
being illuminated by the GAU-LB-400.
Click Photo to Enlarge
Click Photo to Enlarge
The GAU-LB-400 consists of twelve LEDs housed within a waterproof aluminum housing that is powder coated for added durability and
resistance to corrosion. The housing incorporates integral cooling fins for efficient heat dissipation and increased LED longevity. The LED lamp
assembly is protected by a shatterproof polycarbonate lens which is secured to the housing with a waterproof seal. A 1/2" waterproof connector
provides a secure and sealed power connection point and rounds out this unit's weather resistant construction.
The GAU-LB-400 LED wall pack light from Larson Electronics produces a light beam that is longer and narrower than a standard Rab Floodzilla
250W Metal Halide (see comparison chart below). The beam will illuminate an area nearly twice the distance as a standard 250W metal halide
flood light, but is 30% narrower than the metal halide flood.
Mounting hardware for the GAU-LB-400 consists of a stainless steel black coated bracket and stainless steel screws to provide secure mounting
and resistance to rust and corrosion. The mounting assembly provides for 380/180 degrees of rotation to allow the user to position the unit as
desired once mounted. This uint is designed to operate with voltages ranging from 110 VAC to 277 VAC, providing versatile power connection
options and the ability to run the unit with commonly encountered 120-220 VAC voltages. The GAU-LB-400 provides an efficient and highly
durable alternative to standard metal halide and halogen wall pack lights that produces a longer reaching beam while using only a fraction the
power.
With the GAU-LB-400 there is no warm up period, the light can be cycled on and off without any reduction in lamp life, there is no glass or
filament to shatter or break, and the solid state LED design provides 50,000 hours of operation. The GAU-LB-400 is ideal for wall pack lighting,
wall pack down lighting, upwards lighting, monuments, marinas, docks, warehouses, billboards, parking lots, and security systems just to name a
few examples.
11/18/2014
Page: 436
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
GAU-LB-400 Low Bay Light
GAU-LB-400 Features
Lamp Type: LED
Waterproof/Vapor Proof
Dimensions: W-8 1/2" D-3 1/8" H-6 3/8"
Operates on Standard 110-277 VAC
Weight: 4.5 Lbs.
Impact/Vibration Resistant Construction
Watts: 40
50,000 Hour LED Life
Lumens: 1462
ETL Approved for Wet Locations
Voltage: 110~277 Volts AC
Lighting Configuration: Flood
Mounting: Adjustable Bracket
Wiring: Pigtail
Amp Draw: 0.34 @ 120V
Beam: 120' length x 60' width
Special Orders- Requirements
LED Light Color: Cool White - 7638K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Materials: Aluminum Housing, Polycarbonate Lens
Intl: 1-903-498-3363
Color Rendering Index: 79
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics’ Larson Electronics at their expense. If the failure is a
manufacturer defect, we will ship a new replacement to the customer. If
failure occurs within 30 days of receipt, Larson Electronics will provide
a return label via email to the customer. When the failed light is
returned, Larson Electronics will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 437
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Manual
11/18/2014
Page: 438
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LED Light Emitter on Trunnion Wall Mount - 8, 3-Watt LEDs - 24 Watt - 1440 Lumen - 325'L X 70'W Beam
Part #: LEDLB-8ET
Price: $344.93
Buy American Compliant
The Larson Electronics LEDLB-8ET LED Light Bar offers high light output and extreme durability combined a versatile trunnion
mounting system that allows mounting to walls and provides 270 degrees of adjustability. This IP68 rated LED light bar is waterproof
to three meters and produces 1,440 lumens while drawing only 24 watts of power @2 amps from a 12 volt electrical system. This light
can run on any voltage from 9 to 42 volts and provides an extremely rugged lighting solution that is ideal for use in commercial marine
environments as well as industrial applications such as machine vision system lighting, heavy equipment illumination, blasting
lighting and mining operations.
The LEDLB-8ET LED light bar from Larson Electronics produces a 325' long by 70' wide light beam with 1440 lumens of bright light. Eight Edison
EdixeonВ® Emitters containing CREE EZBrightВ® three watt LEDs producing 180 lumens each are arranged in rows and paired with high purity 10
degree optics to produce a tightly focused spot beam with limited spread or light spillage. We also offer optional floodlight versions with 35
degree optics to produce a wider beam spread and more light over a larger area nearer the fixture, making flood versions ideal for use as work
and area lights. These LED light bars are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly
constructed to withstand the most demanding environments, conditions and applications.
The entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier housings, rubber isolated mounts and
unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains, sand and high winds.
11/18/2014
Page: 439
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This image shows a dark street, illuminated by nothing but distant
The same street illuminated with the LEDLB-8E, easily reaching the
street lamps and suburban lighting.
tree and illuminating it's branches over 110 yards away. .
Click Photo to Enlarge
Click Photo to Enlarge
*We have had excellent feedback from boat builders and other marine applications where they are able to create lighting effects on the mast, etc.
that typically cost 10 times as much but with little amp draw. The efficiency of the driver board makes this type of amp draw attractive for current
constrained applications including small equipment, ATVs, boats and other applications where banks of batteries without significant alternator
support are the sole source of power. These units are also ideal for use in manufacturing and industrial operations as machine lighting where
severe vibration and excessive amounts of dirt and grime may be encountered.
11/18/2014
Page: 440
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Edison EdixeonВ® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels
across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as
a result. This multi-voltage capability makes these units ideal for mobile and stand alone applications such as those found on commercial boats,
heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are
impractical.
LEDLB-8ET 35В° Flood Beam
(Opt)
LEDLB-8ET 10В° Spot Beam
(Stnd)
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of
environmental and operating conditions. The LED lights with the �E’ part number designation are designed for extreme durability and are larger
and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85
degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded
aluminum and the lenses are unbreakable polycarbonate. The EdixeonВ® LEDs offer inherent LED resistance to shocks and vibrations
contributing to these units 15.6Grms rating of vibration tolerance.
We recommend these LED lights for high stress - high vibratory conditions, high humidity climates, very cold areas and rough saltwater
conditions. They are also well suited to environments where equipment is used in one temperature extreme and stored in another temperature
extreme.
Adjustable Mounting: The trunnion mounting design on the LEDLB-8ET allows for post-installation angle positioning. This means that by
loosening 2 thumb bolts located on either side of the light, the operator can adjust the positioning angle of this light 270 degrees. Then he/she
would simply have to tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle. We also offer a BC-2 bar clamp
mounting system you can view here for even greater mounting versatility.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as
part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
11/18/2014
Page: 441
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-8ET LED Light Bar
LEDLB LED Features
LEDs: 8 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 6.25"-L 3"-H 3.56"-D
LEDs Driven At 80%
Watts: 24
-40 C~ +80C Operating Temp Range
Voltage: 9-46 VDC
Spot Beam: 325'L x 70'W
RoHS Compliant
Flood Beam: 100'L x 85'W
Weight: 3.4 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
LED Chip Op Temp -40C to +125C
Mounting: Trunnion Bracket
IP68 Rated Waterproof to 3 meters
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps:2 (on 12 volts) 1 (on 24 volts)
Lumens: 1440
Special Orders- Requirements
LED Light Color: 6000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Lux-Spot : @Lens: 188,900 @ 1 Meter 12,860
CE Certified
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 442
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- SpecSheet French
- SpecSheet Arabic
- Dimensional Drawing
- Manual
11/18/2014
Page: 443
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Magnetic Mount 60 Watt Low Profile LED Flood Light - Glare Shield - 20' Cord - 120-277V AC
Part #: LEDWP-600E-M-20C
Price: $340.98
The LEDWP-600E-M-20C Magnetic Mount LED Flood Light offers high light output from a compact form factor and is designed to
provide a more durable and long lived alternative to halogen and metal halide units. This 60 watt LED light produces a wide flood
beam without the high heat, fragile construction, or high energy costs of incandescent lighting.
The LEDWP-600E-M-20C LED flood light from Larson Electronics produces a long flood beam of light while drawing only 0.5 amps at 120 VAC.
The light assembly consists of forty-five LEDs paired with high purity specular optics to produce a wide light distribution overpowering that of a
500 watt quartz flood lights. This light is constructed of three angled boards that helps provide a wider spread. Instead of the light only shining
forward, the center board is concentrated to go straight out while the boards on the side are 45В° offset. This LED wall pack is designed to
withstand demanding conditions and is waterproof, vapor proof, and built to resist the damaging effects of an outdoor environment.
11/18/2014
Page: 444
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
The LEDWP-600E-M-20C consists of forty-five LEDs housed within a waterproof aluminum housing that is powder coated for added durability
and resistance to corrosion. The housing incorporates integral cooling fins for efficient heat dissipation and increased LED longevity. The LED
lamp assembly is protected by a shatterproof polycarbonate lens which is secured to the housing with a waterproof seal. A 1/2" waterproof
connector provides a secure and sealed power connection point and rounds out this unit's weather resistant construction. An optional glare shield
it shipped with this light.
Mounting hardware for the LEDWP-600E consists of a stainless steel coated bracket with 200lb grip magnetic base and stainless steel screws to
provide secure mounting and resistance to rust and corrosion. The mounting assembly provides for 360/180 degrees of rotation and tilt to allow
the user to position the unit as desired once mounted. This unit is designed to operate with voltages ranging from 110 VAC to 277 VAC 50/60 hz,
providing versatile power connection options. The light can be configured with a 5-15 industrial straight blade standard wall plug, 220V schuko
plug for European markets, or an L5-20 twist lock plug. The LEDWP-600E-M provides an efficient and highly durable alternative to
standard quartz and and halogen wall pack lights that produces a longer reaching beam while using only a fraction of the power.
Dark warehouse,
illuminated by 100W incandescent bulb.
Same warehouse
being illuminated by the LEDWP-600E.
Click Photo to Enlarge
Click Photo to Enlarge
With the LEDWP-600E-M there is no warm up period, the light can be cycled on and off without any reduction in lamp life, there is no glass or
filament to shatter or break, and the solid state LED design provides 50,000 hours of operation. The LEDWP-600E is ideal for wall pack lighting,
wall pack down lighting, upwards lighting, monuments, marinas, docks, warehouses, billboards, parking lots, and security systems just to name a
few examples.
11/18/2014
Page: 445
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDWP-600E-M Wall Pack Light
LEDWP-600E Features
Lamp Type: LED
Waterproof/Vapor Proof
Dimensions: W-9" D-3.25" H-6.5"
Operates on Standard 110-277 VAC
Watts: 60
Impact/Vibration Resistant Construction
Lumens: 5400
50,000 Hour LED Life
Voltage: 110-277 Volts AC 50/60hz
ETL Approved for Wet Locations
Lighting Configuration: Flood
IP68 Waterproof
Mounting: Adjustable Magnetic Bracket
200lb Grip Magnetic Base
Wiring: 20' SOOW cable
Amps: 0.5
LED Light Color: Cool White - 6000K
Special Orders- Requirements
LED Life Expectancy: 50,000 hours
Contact us for special requirements
Materials: Aluminum Housing, Polycarbonate Lens
Toll Free: 1-800-369-6671
Color Rendering Index: 80
Intl: 1-903-498-3363
Weight: 9 Lbs.
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
-Scroll Down to Purchase-
11/18/2014
Page: 446
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- BeamInfo
- STEP
11/18/2014
Page: 447
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- EASM
- Hi-Res Image 1
- Hi-Res Image 2
- Hi-Res Image 3
- Hi-Res Image 4
- Hi-Res Image 5
- Hi-Res Image 6
- Hi-Res Image 7
11/18/2014
Page: 448
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LED Machine Light - 200lb. Magnetic Mount - 90'L X 70'W Beam - 12 Watt - Runs Off 110VAC
Part #: LEDLB-4ET-F-M-110V
Price: $305.00
Buy American Compliant
The Larson Electronics LEDLB-4ET-F-M-110V LED Light Bar offers high light output and extreme durability combined with a versatile
magnetic mounting system. This LED light emitter bar light runs on 110VAC provided by an included inline power transformer. The 110
VAC capability of this light provides an extremely rugged lighting solution that is ideal for use in industrial and manufacturing
applications such as machine vision system lighting, industrial machining illumination, blasting lighting and mining operations.
The LEDLB-4ET-F-M-110V LED light bar from Larson Electronics produces a 90' long by 70' wide light beam with 720 lumens of bright light. Four
Edison EdixeonВ® Emitters containing CREE EZBrightВ® three watt LEDs producing 180 lumens each are arranged in rows and paired with high
purity 10 degree optics to produce a tightly focused spot beam with limited spread or light spillage. We also offer optional floodlight versions with
35 degree optics to produce a wider beam spread and more light over a larger area nearer the fixture, making flood versions ideal for use as
work and area lights. These LED light bars are IP68 rated and waterproof to 3 feet, sealed against intrusion by dust and dirt and very ruggedly
constructed to withstand the most demanding environments, conditions and applications.
The entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier housings, rubber isolated mounts and
unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains, sand and high winds. This
magnetic base allows fast and easy setup of this light on vehicles and equipment and will hold the fixture in place at speeds up to 80 mph
provided the mount is properly affixed and secure.
11/18/2014
Page: 449
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This image shows a dark street, illuminated by nothing but distant
The same street illuminated with the LEDLB-4ET-F-M-110V, easily
street lamps and suburban lighting.
reaching distances of 90' in length and 70' in width. .
Click Photo to Enlarge
Click Photo to Enlarge
This LED light emitter bar light is designed to run on any voltage ranging from 9 Volts to 42 Volts. However, with our new integrated inline
transformer design, the fixture can now be operated with standard 110 VAC power found in standard wall outlets. Essentially, this means the
operator can use this LED light bar anywhere a wall plug in is available or, by disconnecting the step down transformer, he/she can power this
LED light emitter bar from any vehicle, equipment, ATV or boat electrical system. You do not need to anything special to operate these light bars
in their multi-voltage 9-32 Volt configuration. They will sense the incoming voltage and adapt accordingly.
This unit is also shipped with 6' of additional SOOW cord, for a combined total length of 11' from the converter to the fixture. In this particular
light, a step down transformer converts the original 110 Volt current into 12 volts to accommodate the fixture. If operator decides he/she would
like to run off 9 - 42 VDC, all he/she has to do is disconnect from said transformer.
11/18/2014
Page: 450
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Edison EdixeonВ® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels
across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as
a result. This multi-voltage capability makes these units ideal for mobile and standalone applications such as those found on commercial boats,
heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are
impractical.
LEDLB-4ET-F-M-110V 35В° Flood Beam
(Opt)
LEDLB-4ET-F-M-110V 10В° Spot Beam
(Stnd)
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of
environmental and operating conditions. The LED lights with the �E’ part number designation are designed for extreme durability and are larger
and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85
degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded
aluminum and the lenses are unbreakable polycarbonate. The EdixeonВ® LEDs offer inherent LED resistance to shocks and vibrations
contributing to these units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions,
high humidity climates, very cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in
one temperature extreme and stored in another temperature extreme.
Magnetic Mounting: The 200 lbs magnet mounting design on the LEDLB-4E-M allows for easy fixture placement and removal. This mounting
system includes a power cord with a cigarette plug connector which makes this unit ideal for vehicle and equipment lighting applications where
the unit can simply be attached or removed as needed. Please note, the magnetic base on this unit increases the units overall height.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as
part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
11/18/2014
Page: 451
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-4ET-F-M-110V LED Light Bar
LEDLB LED Features
LEDs: 4 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 4"-L 3"-H 3.56"-D
LEDs Driven At 80%
Watts: 12
-40 C~ +80C Operating Temp Range
Voltage:110 with included transformer- 9-42 VDC Without transformer RoHS Compliant
Weight: 2.4 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
LED Chip Op Temp -40C to +125C
Mounting: 200lbs Magnetic Mount
IP68 Rated Waterproof to 3 meters
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps: 1 (on 12 volts) .5 (on 24 volts)
Lumens: 720
Special Orders- Requirements
LED Light Color: 6000K or 3000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Lux-Flood : @Lens: 185,800 @ 1 Meter 2,672
Lux-Spot : @Lens: 190,400 @ 1 Meter 8,440
CE Certified
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 452
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- SpecSheet French
- SpecSheet Arabic
11/18/2014
Page: 453
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Dimensional Drawing
- Manual
11/18/2014
Page: 454
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
20 Watt LED Light on Trunnion Adjustable Surface Mount - 1800 Lumen - 9-48VDC - 275'L X 65'W Spot
Part #: LED10W-2RU
Price: $294.00
Buy American Compliant
The Larson Electronics LED10W-2RU LED Boat Light offers high light output from a light weight, durable and water tight fixture. This
IP67 rated LED light bar includes a U-bracket trunnion mount allowing it to be mounted on any flat surface while still being able to
adjust the angle after installation and produces 1800 lumens of light while drawing only 1.7 amps on 12 volts. This light can run on any
voltage from 9 to 48 volts and provides a durable and powerful lighting solution that ideal for use in marine environments as well as
industrial and commercial applications such as machine vision system lighting, security illumination, vehicle lighting and applications.
The LED10W-2RU LED light bar from Larson Electronics produces 1,800 lumens of bright light while drawing only 20 watts @1.7amps from a 12
volt electrical system. Two Seoul Z-Power, 10 watt LEDs producing a maximum of 900 lumens each are paired with 10 degree optics to produce
a well focused spotlight beam approximately 275' long by 70' wide with littel spread or light spillage. We also offer optional floodlight versions
with 35 degree optics to produce a shorter and much wider reaching beam with more light concentrated closer to the fixture. These LED light
bars are IP67 rated and waterproof to 1 meter, sealed against intrusion by dust and dirt and constructed to withstand the demanding conditions
found in marine environments.
11/18/2014
Page: 455
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Seoul Z-Power 10 watt LEDs. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units contain an internal voltage regulator which allows them to adjust input current to provide the correct LED voltage
levels regardless of input levels from 9 to 50 VDC. These LED10W series light bars can operate on current ranging from 9 to 50VDC without any
modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and stand alone applications such as those
found on boats and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are
impractical.
LED10W-2RU 35В° Flood Beam
(Opt)
LED10W-2RU 10В° Spot Beam
(Stnd)
Durability: The LED10W series of LED light bars from Larson Electronics offer IP67 rated construction that is designed to withstand demanding
environmental and operating conditions. These LED lights are designed for low profile mounting options, allowing them to be used in spaces
where room is at a premium. They offer extruded aluminum housings, stainless steel hardware and polycarbonate lenses that provide good
durability, yet are slimmer and lighter than extreme duty LEDLB-E series lights. These units can operate in temperatures ranging from -40
degrees Celsius to 80 degrees Celsius, are waterproof to 1 meter and are sealed against the ingress of dust, dirt and humidity. The Seoul ZPower 10 watt LEDs offer inherent LED resistance to shocks and vibrations, contributing to these unit’s 8.6G rating of vibration tolerance.
Mounting: These LED light bars incorporate a hinge style mounting bracket design that provides 180 degrees of angle adjustment and allows
the operator to attach one portion of the hinge bracket to the mounting surface first. The operator can then set the desired angle and attach the
upper portion of the hinge style mount to the light. The operator then adjusts and tightens the hinge bolt to lock the light bar into position once the
desired angle is set. This particular unit includes a U bracket trunnion mount which allows the fixture to be mounted to walls or any flat surface
while retaining the unit's angle adjustability.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as
part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
On this unit there is a one foot pigtail attached to the LED light terminating in a 2 pin Deutsch plug. A wiring harness attaches to the Deutsch
socket on the back of the LED light. The harness is terminated in a 2 pin Deutsch plug and includes 20 feet of cable, a relay and a toggle switch
that will operate on 12 or 24 volts. The wiring harness is not necessary to installation. Operators can use existing wiring and switches, assuming
they are rated for the amperage listed below.
11/18/2014
Page: 456
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LED10W-2RU LED Light Bar
LED10W-2RU LED Features
LEDs: Seoul Z-Power 10 Watt LEDs
Seoul Z-Power 10 Watt LEDs
Dimensions: 5.2"-L 2.75"-H 2.5"-D
LEDs Driven At 80%
Watts: 20
-40 C~ +80C Operating Temp Range
Voltage: 9-48 VDC
Spot Beam: 275'L x 60'W
900 Lumens per LED
Weight: 2.6Lbs
70% Lumen Retention @50,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
IP67 Rated Waterproof to 1 meter
Mounting: Adjustable U-Mount Trunnion Bracket
Download Spot and Flood Beam Specs
Wiring: 2 pin Deutsch plug
Amps: 1.7 (on 12 volts) 0.85 (on 24 volts)
Lumens: 1,800
Special Orders- Requirements
LED Light Color: 6300K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 80%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Lux At The Lens: 163,700
Lux At 1 Meter: 1,850
CRI: 70
CE Certified
EN55015 EMI
EN61547 EMS
EN62471 Photobiological Safety
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 457
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 458
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Manual
11/18/2014
Page: 459
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
20 Watt LED Light on Trunnion Adjustable Surface Mount - 1800 Lumen - 9-48VDC - 75'L X 85'W Flood
Part #: LED10W-2RU-F
Price: $294.00
Buy American Compliant
The Larson Electronics LED10W-2RUF LED Light offers high light output from a light weight, durable and water tight fixture. This IP67
rated LED light bar includes a U-bracket trunnion mount, allowing it to be mounted on any flat surface while still being able to adjust
the angle after installation and produces 1800 lumens of light while drawing only 1.7 amps on 12 volts. This light can run on any
voltage from 9 to 48 volts and provides a durable and powerful lighting solution that ideal for use in marine environments as well as
industrial and commercial applications such as machine vision system lighting, security illumination and vehicle lighting applications.
The LED10W-2RU LED light bar from Larson Electronics produces 1,800 lumens of bright light while drawing only 20 watts @1.7amps from a 12
volt electrical system. Two Seoul Z-Power, 10 watt LEDs producing a maximum of 900 lumens each are paired with 10 degree optics to produce
a wide floodlight beam approximately 75' long by 85' wide. We also offer optional spotlight versions with 10 degree optics to produce a longer
and much tighter 275' long by 65' wide spotlight beam. These LED light bars are IP67 rated and waterproof to 1 meter, sealed against intrusion
by dust and dirt and constructed to withstand the demanding conditions found in marine environments.
11/18/2014
Page: 460
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Seoul Z-Power 10 watt LEDs. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units contain an internal voltage regulator which allows them to adjust input current to provide the correct LED voltage
levels regardless of input levels from 9 to 50 VDC. These LED10W series light bars can operate on current ranging from 9 to 50VDC without any
modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and stand alone applications such as those
found on boats and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are
impractical.
LED10W-2RUF 35В° Flood Beam
(Stbd)
LED10W-2RUF 10В° Spot Beam
(Opt)
Durability: The LED10W series of LED light bars from Larson Electronics offer IP67 rated construction that is designed to withstand demanding
environmental and operating conditions. These LED lights are designed for low profile mounting options, allowing them to be used in spaces
where room is at a premium. They offer extruded aluminum housings, stainless steel hardware and polycarbonate lenses that provide good
durability, yet are slimmer and lighter than extreme duty LEDLB-E series lights. These units can operate in temperatures ranging from -40
degrees Celsius to 80 degrees Celsius, are waterproof to 1 meter and are sealed against the ingress of dust, dirt and humidity. The Seoul ZPower 10 watt LEDs offer inherent LED resistance to shocks and vibrations, contributing to these unit’s 8.6G rating of vibration tolerance.
Mounting: These LED light bars incorporate a hinge style mounting bracket design that provides 180 degrees of angle adjustment and allows
the operator to attach one portion of the hinge bracket to the mounting surface first. The operator can then set the desired angle and attach the
upper portion of the hinge style mount to the light. The operator then adjusts and tightens the hinge bolt to lock the light bar into position once the
desired angle is set. This particular unit includes a U bracket trunnion mount which allows the fixture to be mounted to walls or any flat surface
while retaining the unit's angle adjustability.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as
part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
On this unit there is a one foot pigtail attached to the LED light terminating in a 2 pin Deutsch plug. A wiring harness attaches to the Deutsch
socket on the back of the LED light. The harness is terminated in a 2 pin Deutsch plug and includes 20 feet of cable, a relay and a toggle switch
that will operate on 12 or 24 volts. The wiring harness is not necessary to installation. Operators can use existing wiring and switches, assuming
they are rated for the amperage listed below.
11/18/2014
Page: 461
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LED10W-2RUF LED Light Bar
LED10W-2RU LED Features
LEDs: Seoul Z-Power 10 Watt LEDs
Seoul Z-Power 10 Watt LEDs
Dimensions: 5.2"-L 2.75"-H 2.5"-D
LEDs Driven At 80%
Watts: 20
-40 C~ +80C Operating Temp Range
Voltage: 9-48 VDC
Spot Beam:75'L x 85'W
900 Lumens per LED
Weight: 2.6Lbs
70% Lumen Retention @50,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
IP67 Rated Waterproof to 1 meter
Mounting: Adjustable U-Mount Trunnion Bracket
Download Spot and Flood Beam Specs
Wiring: 2 pin Deutsch plug
Amps: 1.7 (on 12 volts) 0.85 (on 24 volts)
Lumens: 1,800
Special Orders- Requirements
LED Light Color: 6300K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 80%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Lux At The Lens: 176,900
Lux At 1 Meter: 11,270
CRI: 70
CE Certified
EN55015 EMI
EN61547 EMS
EN62471 Photobiological Safety
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 462
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 463
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Manual
11/18/2014
Page: 464
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
8 Watt LED Light Fixture - Low Profile Strip Light - 13.4" Low Voltage Light Fixture
Part #: GSLEDIP12-GEN
Price: $292.40
Buy American Compliant
The Larson Electronics GSLEDIP12-GEN is a low voltage lighting solution approved for use in wet locations. This powerful LED strip
light produces 442 lumens, operates from 12 or 24 VDC, and is suitable for a variety of applications.
The GSLEDIP12-GEN is designed to provide a high output and ruggedly durable lighting solution. This low voltage light can be operated with
either 12 or 24 volt DC current and includes 6 feet of connecting lead with standard two wire configuration. This light is constructed of powder
coated extruded aluminum for excellent strength and durability and is rated IP54 for protection against exposure to water spray and limited dust
ingress. These units are configured in a 13" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is
preferred. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older,
bulkier, and less reliable incandescent and halogen light fixtures.
Durability/Mounting: The GSLEDIP12-GEN LED light is constructed of extruded aluminum with a tough powder coat finish for high strength and
durability. The housing is IP54 rated, providing limited ingress protection against dusts, and l protection against light water spray such as rain.
This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty conditions are commonly
encountered.
The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree
LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life
than comparable LEDs.
Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust
the light vertically for the best placement. The entire assembly weighs 0.7 lbs and measures 13.4 inches in length and 2.68 inches wide and
1.69" deep, making it ideal for mounting in areas where space is limited and a low profile fixture more readily installed.
Wiring/Power: These LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting configuration.
These lights operate from 12 or 24 volt DC current at 8 watts .66 amps on 12 VDC and .33 amps on 24 VDC.
Versatility: This unit carries an IP56 waterproof rating ensuring protection against limited ingress from dusts, dirt, oils and full protection against
water sprayed at high pressure directly on the fixture. This light is ideal for indoor or outdoor applications and industrial operations where dusty or
wet conditions are commonly encountered.
11/18/2014
Page: 465
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
GSLEDIP12-GEN LED Light
GSLEDIP12-GEN Ratings
Lamp Type: LED
IP54 Ingress Protection
Dimensions: Lamp 13.38"-L 2.68" -W 1.69"- D
T3 Temperature Rating
Weight: 0.7lb | 0.3 k g
Watts: 8.4 W
Voltage: 12-24 VDC
Lumens: 442
Lamp Life Expectancy: 100,000 Hours
CRI: 75
Amps: 0.66 A @12 VDC | 0.33 A @ 24 VDC
Light Color: 6500K
Special Orders- Requirements
Beam Type: 100В° Flood
Contact us for special requirements
Mounting: 1/4” - 20 Screws /Aluminum 1” Yoke
Toll Free: 1-800-369-6671
Temp Range: -40°C – +85°C
Intl: 1-903-498-3363
Wiring: 6Ft Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 466
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Magnetic Mount 60 Watt Low Profile LED Wall Pack Light with Glare Shield - Wide Flood Beam
Part #: LEDWP-600E-M
Price: $290.98
The LEDWP-600E-M Magnetic Mount LED Flood Light offers high light output from a compact form factor and is designed to provide a
more durable and long lived alternative to halogen and metal halide units. This 60 watt LED light produces a wide flood beam without
the high heat, fragile construction, or high energy costs of incandescent lighting.
The LEDWP-600E-M LED flood light from Larson Electronics produces a long flood beam of light while drawing only 0.5 amps at 120 VAC. The
light assembly consists of forty-five LEDs paired with high purity specular optics to produce a wide light distribution overpowering that of a 500
watt quartz flood lights. This light is constructed of three angled boards that helps provide a wider spread. Instead of the light only shining
forward, the center board is concentrated to go straight out while the boards on the side are 45В° offset. This LED wall pack is designed to
withstand demanding conditions and is waterproof, vapor proof, and built to resist the damaging effects of an outdoor environment.
11/18/2014
Page: 467
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
The LEDWP-600E-M consists of forty-five LEDs housed within a waterproof aluminum housing that is powder coated for added durability and
resistance to corrosion. The housing incorporates integral cooling fins for efficient heat dissipation and increased LED longevity. The LED lamp
assembly is protected by a shatterproof polycarbonate lens which is secured to the housing with a waterproof seal. A 1/2" waterproof connector
provides a secure and sealed power connection point and rounds out this unit's weather resistant construction. An optional glare shield it shipped
with this light.
Mounting hardware for the LEDWP-600E consists of a stainless steel coated bracket with 200lb grip magnetic base and stainless steel screws to
provide secure mounting and resistance to rust and corrosion. The mounting assembly provides for 360/180 degrees of rotation and tilt to allow
the user to position the unit as desired once mounted. This unit is designed to operate with voltages ranging from 110 VAC to 277 VAC 50/60 Hz,
providing versatile power connection options. The LEDWP-600E-M provides an efficient and highly durable alternative to standard quartz
and and halogen wall pack lights that produces a longer reaching beam while using only a fraction of the power.
Dark warehouse,
illuminated by 100W incandescent bulb.
Same warehouse
being illuminated by the LEDWP-600E.
Click Photo to Enlarge
Click Photo to Enlarge
With the LEDWP-600E-M there is no warm up period, the light can be cycled on and off without any reduction in lamp life, there is no glass or
filament to shatter or break, and the solid state LED design provides 50,000 hours of operation. The LEDWP-600E is ideal for wall pack lighting,
wall pack down lighting, upwards lighting, monuments, marinas, docks, warehouses, billboards, parking lots, and security systems just to name a
few examples.
11/18/2014
Page: 468
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDWP-600E-M Wall Pack Light
LEDWP-600E Features
Lamp Type: LED
Waterproof/Vapor Proof
Dimensions: W-9" D-3.25" H-6.5"
Operates on Standard 110-277 VAC
Watts: 60
Impact/Vibration Resistant Construction
Lumens: 5400
50,000 Hour LED Life
Voltage: 110-277 Volts AC 50/60hz
ETL Approved for Wet Locations
Lighting Configuration: Flood
IP68 Waterproof
Mounting: Adjustable Magnetic Bracket
200lb Grip Magnetic Base
Wiring: Pigtail
Amps: 0.5
LED Light Color: Cool White - 6000K
Special Orders- Requirements
LED Life Expectancy: 50,000 hours
Contact us for special requirements
Materials: Aluminum Housing, Polycarbonate Lens
Toll Free: 1-800-369-6671
Color Rendering Index: 80
Intl: 1-903-498-3363
Weight: 9 Lbs.
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
-Scroll Down to Purchase-
11/18/2014
Page: 469
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- BeamInfo
- Hi-Res Image 1
- Hi-Res Image 2
11/18/2014
Page: 470
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Hi-Res Image 3
- Hi-Res Image 4
- Hi-Res Image 5
- Hi-Res Image 6
- Hi-Res Image 7
11/18/2014
Page: 471
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
8 Watts General Area Use LED Light Fixture- 13.4" Light Bar
Part #: GAU-13-8W-LED
Price: $290.88
Buy American Compliant
The Larson Electronics GAU-13-8W-LED is a low voltage lighting solution approved for use in wet locations. This powerful LED strip
light produces 442 lumens, operates from 12 or 24 VDC, and is suitable for a variety of applications.
The GAU-13-8W-LED is designed to provide a high output and ruggedly durable lighting solution. This low voltage light can be operated with
either 12 or 24 volt DC current and includes 6 feet of connecting lead with standard two wire configuration. This light is constructed of powder
coated extruded aluminum for excellent strength and durability and is rated IP54 for protection against exposure to water spray and limited dust
ingress. These units are configured in a 13" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is
preferred. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older,
bulkier, and less reliable incandescent and halogen light fixtures.
Durability/Mounting: The GAU-13-8W-LED LED light is constructed of extruded aluminum with a tough powder coat finish for high strength and
durability. The housing is IP54 rated, providing limited ingress protection against dusts, and l protection against light water spray such as rain.
This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty conditions are commonly
encountered.
The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree
LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life
than comparable LEDs.
Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust
the light vertically for the best placement. The entire assembly weighs 0.7 lbs and measures 13.4 inches in length and 2.68 inches wide and
1.69" deep, making it ideal for mounting in areas where space is limited and a low profile fixture more readily installed.
Wiring/Power: These LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting configuration.
These lights operate from 12 or 24 volt DC current at 8 watts .66 amps on 12 VDC and .33 amps on 24 VDC.
Versatility: This unit carries an IP56 waterproof rating ensuring protection against limited ingress from dusts, dirt, oils and full protection against
water sprayed at high pressure directly on the fixture. This light is ideal for indoor or outdoor applications and industrial operations where dusty or
wet conditions are commonly encountered.
11/18/2014
Page: 472
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
GAU-13-8W-LED LED Light
GAU-13-8W-LED Ratings
Lamp Type: LED
IP54 Ingress Protection
Dimensions: Lamp 13.38"-L 2.68" -W 1.69"- D
T3 Temperature Rating
Weight: 0.7lb | 0.3 k g
Watts: 8.4 W
Voltage: 12-24 VDC
Lumens: 442
Lamp Life Expectancy: 100,000 Hours
CRI: 75
Amps: 0.66 A @12 VDC | 0.33 A @ 24 VDC
Light Color: 6500K
Special Orders- Requirements
Beam Type: 100В° Flood
Contact us for special requirements
Mounting: 1/4” - 20 Screws /Aluminum 1” Yoke
Toll Free: 1-800-369-6671
Temp Range: -40°C – +85°C
Intl: 1-903-498-3363
Wiring: 6Ft Lead | White: + Black: -
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 473
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- STEP
- DXF
11/18/2014
Page: 474
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
20 Watt High Intensity LED Light - 2 LEDs - 1,840 Lumens - Degreed Aiming - Soft Start LEDs
Part #: LED10WSA-20
Price: $280.84
11/18/2014
Page: 475
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The LED10WSA-20 LED Light offers high output from a compact form factor and is ideal for use in mining applications as well as
heavy equipment, hunting, boating, vehicle, military, law enforcement and industrial manufacturing uses. A 1,840 lumen output, 50,000
hour service life and 12-24 volt compatibility provides operators with a rugged and powerful LED alternative to 100 watt halogen lamps
that uses little power and can withstand rugged use and abusive mining conditions.
The LED10WSA-20 high output LED light from Larson Electronics produces 1,840 lumens of high intensity light while drawing only 20 watts @
1.52 amps from a 12 volt electrical system. Two CREE XM-L2В® ten watt LEDs producing 920 lumens each are arranged in rows and paired with
high purity optics to produce a well focused 10В° spot beam that is ideal for providing far reaching concentrated illumination while still covering a
substantial amount of area. We also offer optional floodlight versions with a 40В° or 60В° beam spread to provide more light over a larger area
nearer the fixture, making flood versions ideal for use as dedicated work and area lights. These LED light bars are waterproof to 3 meters, sealed
against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding environments, conditions and applications.
LED10WSA-20 lights are ideal replacements for fragile and hot running 100 watt halogen lamps. They offer soft start technology, a small profile,
low power requirements, high durability and a shock dampening mounting system that makes these LED light emitters a superior lighting solution
for rough applications where power and reliability is critical. The heavy duty design and high power of these LED lights also makes them suitable
for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning, mining, security and law
enforcement, boating, vehicles and commercial structure illumination.
Protection: These high output LED light bars feature soft start technology, allowing the LEDs to gradually increase to maximum intensity
instead. Low in rush current at start-up reduces wear on associated components, increasing overall life of the internal electronics and improves
downtime. Built in redundancy lessens chance of full fixture failure, while the reverse polarity operation protects the fixture from shorting the
internal components.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of
light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on
or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
Voltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels
regardless of input levels across a specific range. These LED10WSA series light bars can operate on current ranging from 11 to 65 VDC without
any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops
that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it.
Durability: As well as unparalleled heat control, the LED10WSA series of LED lights from Larson Electronics also offer IP69K rated construction
that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40В°C
to +80В°C, are waterproof to three meters, can withstand high pressure and high temperature wash downs, and resist ingress of dust, dirt and
humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XM-L2В® LEDs help these
units achieve up to 60Grms rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend
these LED lights for use in applications that require regular intensive cleaning and are exposed to a lot of vibration, dust, dirt, and abusive
working conditions are encountered.
Mounting: Each unit is equipped with an innovative trunnion style mounting bracket that allows the light to be attached to flat surfaces and
adjusted through 360 degrees of vertical movement. The LED light head is secured to the mounting bracket with shock dampening rotating
inserts. The insert provides precision aiming down to 1В° while providing increased longevity to the LED fixture. To vertically adjust the unit after
mounting, the user simply loosens the screws located on either side of the unit, moves it into the desired position, then retightens the screws.
The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and slide the unit
for precise mount positioning. The stainless steel trunnion bracket has preset angles marked in 5В° intervals, allowing operators to precisely aim
each fixture.
Note: The LED10WSA series feature gold plated DT connectors to provide better conductivity. Most Larson Electronics LEDP5W-30, LEDLB,
LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The
mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending
on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating,
IR/Visible combos) will have different Deutsch connectors.
Applications for the LEDP10WSA include but are not limited to mining, dump trucks, construction machinery, cement mixers, and car washes.
11/18/2014
Page: 476
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LED10WSA-20 High Output LED Light
LED10WSA-20 Series Features
Lamp Type: CREE XL-L2В® LED
Automatic Current Sensing and Adjusting
Dimensions: 4.37"-L 3.43 "-H 3.39 "-D
Active Heat Management
Watts: 20
Ambient Op Temp -40В°C to +80В°C
Led Drive %: 90%
IP69K High Temp High Pressure Wash Down
Voltage: Universal Voltage 11-65V DC
EMC/EMI CISPR 25 Class 3 Rated
Beam Spread: 10В° Spot, 40В° Flood, 60В° Flood, 30В°/60В° Elliptical
304 Stainless Steel Mounting Hardware
Mounting: Flat Surface 304 SS Bracket - 360 Degree Adjustable
Shock Dampening Mounting System
Wiring: Gold Plated Deutsch IPD / LADD DT04-2P connector
Amps: 1.52 (on 12 volts) - 0.76 (on 24 volts)
Lumens: 1.840
Special Orders- Requirements
LED Light Color: White
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black
Weight: 2.2 Lbs
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 477
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
12 Watt LED Machine Light - 90'L X 70'W Beam - Runs Off 110VAC
Part #: LEDLB-4ET-F-110V
Price: $278.03
Buy American Compliant
The Larson Electronics LEDLB-4ET-F-110V LED Light Bar offers high light output and extreme durability combined
with a versatile adjustable mounting system. This LED light emitter bar light runs on 110VAC provided by an
included inline power transformer. The 110 VAC capability of this light provides an extremely rugged lighting
solution that is ideal for use in industrial and manufacturing applications such as machine vision system lighting,
industrial machining illumination, blasting lighting and mining operations.
The LEDLB-4ET-F-110V LED light bar from Larson Electronics produces a 90' long by 70' wide light beam with 720 lumens
of bright light. Four Edison EdixeonВ® Emitters containing CREE EZBrightВ® three watt LEDs producing 180 lumens each
are arranged in rows and paired with high purity 10 degree optics to produce a tightly focused spot beam with limited
spread or light spillage. We also offer optional floodlight versions with 35 degree optics to produce a wider beam spread
and more light over a larger area nearer the fixture, making flood versions ideal for use as work and area lights. These LED
light bars are IP68 rated and waterproof to 3 feet, sealed against intrusion by dust and dirt and very ruggedly constructed to
withstand the most demanding environments, conditions and applications.
The entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier housings, rubber
isolated mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves,
hard rains, sand and high winds. This magnetic base allows fast and easy setup of this light on vehicles and equipment and
will hold the fixture in place at speeds up to 80 mph provided the mount is properly affixed and secure.
11/18/2014
Page: 478
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This image shows a dark street, illuminated by nothing but distant street
lamps and suburban lighting.
The same street illuminated with the LEDLB-4ET-F-110V, easily reaching
distances of 90' in length and 70' in width. .
Click Photo to Enlarge
Click Photo to Enlarge
This LED light emitter bar light is designed to run on any voltage ranging from 9 Volts to 42 Volts. However, with our new
integrated inline transformer design, the fixture can now be operated with standard 110 VAC power found in standard wall
outlets. Essentially, this means the operator can use this LED light bar anywhere a wall plug in is available or, by
disconnecting the step down transformer, he/she can power this LED light emitter bar from any vehicle, equipment, ATV or
boat electrical system. You do not need to anything special to operate these light bars in their multi-voltage 9-32 Volt
configuration. They will sense the incoming voltage and adapt accordingly.
This unit is also shipped with 6' of additional SOOW cord, for a combined total length of 11' from the converter to the fixture.
In this particular light, a step down transformer converts the original 110 Volt current into 12 volts to accommodate the
fixture. If operator decides he/she would like to run off 9 - 42 VDC, all he/she has to do is disconnect from said transformer.
11/18/2014
Page: 479
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many
manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an
extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to
produce the maximum amount of power and longevity from the integrated Edison EdixeonВ® Emitters. The end result is
more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels
regardless of input levels across a specific range. These LEDLB series light bars can operate on current ranging from 9 to
42VDC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and
standalone applications such as those found on commercial boats, heavy equipment and vehicles where power systems
don’t always operate with 12 volts and external generators, transformers or inverters are impractical.
LEDLB-4ET-F-110V 35В° Flood Beam (Opt)
LEDLB-4ET-F-110V10В° Spot Beam (Stnd)
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to
withstand extremes of environmental and operating conditions. The LED lights with the �E’ part number designation are
designed for extreme durability and are larger and nearly twice as heavy as their standard counterparts. These units can
withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and
resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum and the lenses are
unbreakable polycarbonate. The EdixeonВ® LEDs offer inherent LED resistance to shocks and vibrations contributing to
these units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory
conditions, high humidity climates, very cold areas and rough saltwater conditions. They are also well suited to
environments where equipment is used in one temperature extreme and stored in another temperature extreme.
Adjustable Mounting: The trunnion wall mounting design on the LEDLB-4ET allows for post-installation angle positioning.
This means that by loosening 2 thumb bolts located on either side of the light, the operator can adjust the positioning angle
of this light 270 degrees. Then he/she would simply have to tighten thumb bolts to lock the angle in place. No tools are
required for adjusting angle. We also offer a BC-2 bar clamp mounting system you can view here for even greater mounting
versatility.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are
terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and
LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED
lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible
combos) will have different Deutsch connectors.
11/18/2014
Page: 480
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-4ET-F-110V LED Light Bar
LEDLB LED Features
LEDs: 4 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 4"-L 3"-H 3.56"-D
LEDs Driven At 80%
Watts: 12
-40 C~ +80C Operating Temp Range
Voltage:110 with included transformer- 9-42 VDC Without transformer
RoHS Compliant
Weight: 2.4 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
LED Chip Op Temp -40C to +125C
Mounting: Adjustable Trunnion
IP68 Rated Waterproof to 3 meters
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps: 1 (on 12 volts) .5 (on 24 volts)
Lumens: 720
Special Orders- Requirements
LED Light Color: 6000K or 3000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Lux-Flood : @Lens: 185,800 @ 1 Meter 2,672
Lux-Spot : @Lens: 190,400 @ 1 Meter 8,440
CE Certified
3 year warranty replacement on this LED light. After 30 days, the customer
ships the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement.
Scroll Down to Purchase-
11/18/2014
Page: 481
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/18/2014
Page: 482
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
60 Watt Remote Control Color Changing LED Wall Pack Light - Wide Flood Beam - U-Bracket Mount
Part #: LEDWP-600-RGB
Price: $251.73
The LEDWP-600-RGB Color Changing LED Wall Pack Light offers high light output from a compact form factor and is designed to
provide a more durable and long lived alternative to halogen and metal halide units. This 60 watt remote control RGB LED light
produces a wide flood beam in a variety of colors and configurations without the high heat, fragile construction, or high energy costs
of traditional lighting.
The LEDWP-600-RGB color changing LED wall pack light from Larson Electronics produces a colorful flood beam while drawing only 0.5
amps at 120 VAC. The light assembly consists of forty-five LEDs paired with high purity specular optics to produce a
wide light distribution overpowering that of a 500 watt quartz flood lights. This light is constructed of three angled boards that helps provide a
wider spread. Instead of the light only shining forward, the center board is concentrated to go straight out while the boards on the side are 45В°
offset. This LED wall pack is designed to withstand demanding conditions and is waterproof, vapor proof, and built to resist the damaging effects
of an outdoor environment.
This color changing LED flood light is an RGB unit, meaning it can produce red, green and blue light of varying levels and intensity. Operators
scroll through various colors by using an included handheld remote. This LED light is also dimmable, and can be set to operate in different
modes including steady burn, flash, strobe, color fade, and smooth fade. Users can also turn the lamp on/off via remote control. This floodlight
has internal memory and will remember the last set configuration when power is cut via light switch or unplugging the lamp. This high output LED
flood light is an ideal replacement for high temperature incandescent, fluorescent, and metal halide lamps without fragile design, high energy
consumption, and need for colored filters or special coatings as seen with traditional lighting.
The LEDWP-600-RGB consists of forty-five LEDs housed within a waterproof aluminum housing that is powder coated for added durability and
resistance to corrosion. Each LED chip contains individual red, blue, and green diodes to produce a full spectrum of color choices. The housing
incorporates integral cooling fins for efficient heat dissipation and increased LED longevity. The LED lamp assembly is protected by a
shatterproof polycarbonate lens which is secured to the housing with a waterproof seal. A 1/2" waterproof connector provides a secure and
sealed power connection point and rounds out this unit's weather resistant construction.
The remote control included with this multi color LED lamp is an wireless control unit with a working distance of 25 feet. This remote control
capability is ideal for operators who install these LED flood lights in hard to reach or elevated locations, allowing them to change the color and
operating modes of the lamp quickly and easily. The remote can be used to control multiple lamps, and on/off control can be remotely managed
as well. Multiple units can be synchronized together by holding the "on" button for 10 seconds, allowing operators to sync color changes and light
configurations across multiple lamps.
Mounting hardware for the LEDWP-600-RGB consists of a stainless steel coated bracket and stainless steel screws to provide secure mounting
and resistance to rust and corrosion. The mounting assembly provides for 360/180 degrees of rotation and tilt to allow the user to position the
unit as desired once mounted. This unit is designed to operate with voltages ranging from 110 VAC to 277 VAC 50/60 hz, providing versatile
power connection options. The LEDWP-600-RGB provides an efficient and highly durable alternative to standard quartz and and halogen wall
pack lights that produces a longer reaching beam while using only a fraction of the power.
With the LEDWP-600-RGB there is no warm up period, the light can be cycled on and off without any reduction in lamp life, there is no glass or
filament to shatter or break, and the solid state LED design provides 50,000 hours of operation. The LEDWP-600-RGB is ideal for landscape
lighting, aesthetic lighting, wall pack lighting, down lighting, upwards lighting, event lighting, restaurants, monuments, marinas, docks, billboards,
and any application requiring a high output colored LED flood light.
11/18/2014
Page: 483
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDWP-600-RGB Wall Pack Light
LEDWP-600-RGB Features
Lamp Type: RGB LED
Waterproof/Vapor Proof
Dimensions: W-9" D-3.25" H-6.5"
Operates on Standard 110-277 VAC
Watts: 60
Impact/Vibration Resistant Construction
Lumens: 5400
50,000 Hour LED Life
Voltage: 110-277 Volts AC 50/60hz
ETL Approved for Wet Locations
Lighting Configuration: Flood - Steady, strobe, flash cycle
IP68 Waterproof
Operation: Remote Control
Color Changing LED Flood Light
Mounting: Adjustable Bracket
Remote Control Adjustability
Wiring: Pigtail
Amps: 0.5
Special Orders- Requirements
LED Light Color: Color Changing: Red/Green/Blue
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Materials: Aluminum Housing, Polycarbonate Lens
Intl: 1-903-498-3363
Weight: 8.3 Lbs.
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
-Scroll Down to Purchase-
11/18/2014
Page: 484
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
60 Watt Colored LED Wall Pack Light - Wide Flood Beam - U-Bracket Mount - Red, Blue, Green, Amber
Part #: LEDWP-600C
Price: $234.29
The LEDWP-600C Colored LED Wall Pack Light offers high light output from a compact form factor and is designed to provide a more
durable and long lived alternative to halogen and metal halide units. This 60 watt colored LED light produces a wide flood beam
without the high heat, fragile construction, or high energy costs of traditional lighting.
The LEDWP-600C colored LED wall pack light from Larson Electronics produces a colorful flood beam while drawing only 0.5 amps at 120 VAC.
The light assembly consists of forty-five LEDs paired with high purity specular optics to produce a wide light distribution overpowering that of a
500 watt quartz flood lights. This light is constructed of three angled boards that helps provide a wider spread. Instead of the light only shining
forward, the center board is concentrated to go straight out while the boards on the side are 45В° offset. This colored flood light is offered in red,
blue, green, amber, purple, pink, and white light outputs.
This LED wall pack is designed to withstand demanding conditions and is waterproof, vapor proof, and built to resist the damaging effects of an
outdoor environment. The high output and solid state LED design make this flood light is an ideal replacement for high temperature
incandescent, fluorescent, and metal halide lamps without fragile design, high energy consumption, and need for colored filters or special
coatings as seen with traditional lighting.
The LEDWP-600C consists of forty-five LEDs housed within a waterproof aluminum housing that is powder coated for added durability and
resistance to corrosion. Each LED chip contains individual colored diodes instead of colored lenses or covers, producing a higher output and
more energy efficient colored flood light. The housing incorporates integral cooling fins for efficient heat dissipation and increased LED longevity.
The LED lamp assembly is protected by a shatterproof polycarbonate lens which is secured to the housing with a waterproof seal. A 1/2"
waterproof connector provides a secure and sealed power connection point and rounds out this unit's weather resistant construction.
Mounting hardware for the LEDWP-600C consists of a stainless steel coated bracket and stainless steel screws to provide secure mounting and
resistance to rust and corrosion. The mounting assembly provides for 360/180 degrees of rotation and tilt to allow the user to position the unit as
desired once mounted. This unit is designed to operate with voltages ranging from 110 VAC to 277 VAC 50/60 hz, providing versatile power
connection options. The LEDWP-600C provides an efficient and highly durable alternative to standard quartz and halogen wall pack lights that
produces a longer reaching beam while using only a fraction of the power.
With the LEDWP-600C there is no warm up period, the light can be cycled on and off without any reduction in lamp life, there is no glass or
filament to shatter or break, and the solid state LED design provides 50,000 hours of operation. The LEDWP-600C is ideal for landscape lighting,
aesthetic lighting, wall pack lighting, down lighting, upwards lighting, event lighting, restaurants, monuments, marinas, docks, billboards, and any
application requiring a high output colored LED flood light.
11/18/2014
Page: 485
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDWP-600C Colored Wall Pack LED Light
LEDWP-600C Features
Lamp Type: Colored LED
Waterproof/Vapor Proof
Dimensions: W-9" D-3.25" H-6.5"
Operates on Standard 110-277 VAC
Watts: 60
Impact/Vibration Resistant Construction
Lumens: 5400
50,000 Hour LED Life
Voltage: 110-277 Volts AC 50/60hz
ETL Approved for Wet Locations
Lighting Configuration: Flood
IP68 Waterproof
Mounting: Adjustable Bracket
High Output Colored LEDs
Wiring: Pigtail
Amps: 0.5
Special Orders- Requirements
LED Light Color: Red, Blue, Green, Amber, Purple, Pink, White
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Materials: Aluminum Housing, Polycarbonate Lens
Intl: 1-903-498-3363
Weight: 8.3 Lbs.
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
-Scroll Down to Purchase-
11/18/2014
Page: 486
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Hi-Res Image 1 - Hi-Res Image 2 - Hi-Res Image 3 -
11/18/2014
Page: 487
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Hi-Res Image 4 - Hi-Res Image 5 -
11/18/2014
Page: 488
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LED Spreader Deck Light- (4) LEDS- White Aluminum Housing - Dual Colors - Dimmable
Part #: LED-SL-4-2C
Price: $215.00
Made in the USA
The LED-SL-4-2C LED spreader light from Larson Electronics contains 4 LEDs and produces 972 lumens of dual color light in a
circular flood pattern while drawing only 10.8 watts on a 12 volt electrical system. This compact and fully sealed LED spreader light
can be operated on voltages ranging from 10 to 30 VDC and is ideal for use in marine environments as deck lighting, cockpit or cabin
lighting and anywhere a high quality, bright light is desired.
This LED spreader light is designed for marine use and is an ideal alternative to, or upgrade from, the common 55 watt halogen lamps used on
boats and yachts to illuminate bridges, cockpits, cabins and decks. These LED spreader lights produce 972 lumens of high quality light and draw
only 880mA when connected to a 12 volt electrical system, resulting in up to 80% lower power consumption when compared to the halogen
lamps they are designed to replace. The light produced by this unit is very evenly distributed in a circular flood pattern approximately 16' in
diameter and much purer and clean without the yellowish tint often associated with halogen or incandescent lamps. This LED light is completely
sealed making it IP67 compliant and waterproof.
Click here to read an article on the advantages of LED Boat lights over incandescent, fluorescent, or HID Boat lights.
This unit’s housing is constructed of die cast aluminum with a white powder coat finish for high durability and fully sealed against intrusion from
water or dust making it IP67 compliant. Measuring only 4.5 inches long by 1.6 inches wide, this very compact LED spreader light fixture is
designed for stud mounting with a single 1/4-20 stud mount on a pivoting bracket for easy installation. The pivoting bracket allows adjustment of
the fixture to any angle and a simple nylock secures the angle of the light once positioned. Connection to power is via two simple power leads
and the unit can be operated on voltages ranging from 10 or 30 VDC without any modifications necessary. The LEDs and sealed construction of
this unit provide 50,000+ hours of LED operation with minimal maintenance or upkeep requirements.
11/18/2014
Page: 489
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LED-SL-4-2C LED Spreader Boat Light
Certification-Features
Lamp Type: LED
Adjustable Stud Mounting
Dimensions: 4.5"-L 1.6"-W
Die Cast aluminum housing
Watts: 10.8 Watts
IP 67 Compliant-Waterproof
Voltage: 10 or 30 VDC
Dual Colors - Red+White or Blue+White
Mounting: Single Stud Mount
Wiring: Conventional 2 Wire
Amps: 880mA (on 12 Volts)
Lumens: 972
Dimmable: YES
LED Life Expectancy: 50,000+ hours
Special Orders- Requirements
Materials: Die Cast Aluminum Housing
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 490
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Manual
11/18/2014
Page: 491
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Low Profile Trunnion Mount LED Light Bar - 3, 3-Watt LEDs - 9-32 Volts DC - 684 Lumen - .8 Amp Draw
Part #: LEDP3W-3ET
Price: $199.95
Buy American Compliant
The LEDP3W-3ET trunnion mount LED Light Bar offers high light output from a compact form factor and is ideal for a wide range of
uses including heavy equipment, boating, vehicle, military, law enforcement and industrial manufacturing applications. 684 lumen light
output with very low amp draw, 50,000 hour service life and 9 to 32 volt compatibility provides operators with a compact and powerful
LED lighting solution.
The LEDP3W-3ET trunnion mount LED light bar from Larson Electronics produces 684 lumens of bright light while drawing only 9 watts @.8
amps from a 12 volt electrical system. Three CREE XLamp XR-EВ® three watt LEDs producing 228 lumens each are paired with high purity optics
to produce a tightly focused 10 degree spot beam approximately 375’ long. We also offer optional floodlight versions with a 40 degree beam
spread to provide more light over a larger area nearer the fixture, making flood versions ideal for use as work and area lights. These LED light
bars are waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding
environments, conditions and applications.
An integral Pulse Width Modulation controller, small profile, low power requirements, high durability and versatile mounting system makes these
LED light emitters a superior lighting solution for a wide array of applications including but not limited to: military, industrial manufacturing,
machine visioning, security and law enforcement, boating, offroading and commercial structure illumination.
This photo shows an open field illuminated
only by ambient light at approximately 9:00
pm'.
This photo shows the LEDP3W-3 in spot
configuration, illuminating a 'Larson
Electronics' sign set approx. 600 feet away.
This photo shows the LEDP3W-3 illuminating
the sign approx. 600 feet away. In spot mode,
the LED unit projects a long, narrow beam,
capable of reaching out over 600'.
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
11/18/2014
Page: 492
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss
of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually
on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to tap into a provided input wire
with an external pulse generator and adjust the duty cycle of the current being applied to the LEDs. Thus you can connect an external dimmer,
switch or pulse control and adjust the perceived output of the light, effectively causing the light to flash, dim or brighten to the desired levels.
Additionally, this method of controlling light output results in a corresponding drop in amperage draw, so if the duty cycle is cut back to 50% there
will be a matching 50% reduction in amperage draw. These units are also able to monitor and adjust input current to maintain the correct LED
voltage levels regardless of input levels across a specific range. These LEDP3W series light bars can operate on current ranging from 9 to
46VDC without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage
spikes and drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it.
Durability: As well as unparalleled heat control, the LEDP3W series of LED light bars from Larson Electronics also offer IP68 rated construction
that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40
degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed
from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XR-EВ® LEDs offer resistance to shocks and
vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend these LED lights for high humidity climates, very
cold areas and rough saltwater conditions. They are also applicable to environments where equipment is used in one temperature extreme and
stored in another temperature extreme.
Adjustable Mounting: The trunnion mounting design on the LEDP3W-18X2ET allows for post-installation angle positioning. This means that by
loosening 2 thumb bolts located on either side of the light, the operator can adjust the positioning angle of this light 270 degrees. Then he/she
would simply have to tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle. We also offer a BC-2 bar clamp
mounting system you can view here for even greater mounting versatility.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as
part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
LEDP3W-3ET 40В° Flood Beam
(Opt)
LEDP3W-3ET 10В° Spot Beam
(Stnd)
11/18/2014
Page: 493
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
CONDITIONS
Vin min (V) = 9
toff (us) = 2.9
Vin nom (V) = 12
R1 (kohm) = 50.2
Vin max (V) = 50
L1 (uH) = 3.0
Vo min (V) = 6.5
L-Pk (A) = 2.9
Vo nom (V) = 6.8
L-rms (A) = 2.9
Vo max (V) = 7
Ipk (A) = 2.5
I-LED (A) = 2.2
R2 (ohm) = 0.10
Efficiency = .85
I-FET (A) = 2.2
fsw nom (kHz) = 150
fs min (kHz) = 77
Ts nom (us) = 6.666667
fs max (kHz) = 301
Base frequency-
= 36~37Khz @ 12V
Amplitude of pulse width-
= 27Ms
Outside: External dimmer-
= 500Hz
Inside : Current sensing from-
77KHz at 12V to 300KHz at 50V
Specifications / Additional Information
LEDP3W-3ET LED Light Bar
Internal LED Driver Features
Lamp Type: CREE XLamp XR-EВ® LED
Fast average current control
Dimensions: 4.75 "-L 2"-H 2.5"-D
Programmable off-time switching
Watts: 9
Linear dimming input
Led Drive %: 90%
PWM dimming input
Voltage: 9-32 VDC
Spot Beam: 375'L x 70'W
Flood Beam: 100'L x80'W
Short protection w/Skip mode
Lighting Configuration: 10В° Spot or 40В° Flood
Ambient Op Temp -40C to +125C
Mounting: Adjustable Trunnion
Pin-compatible with the HV9910B
Wiring: Deutsch IPD / LADD DT04-2P connector
View Avg-Mode Driver Control PDF
Amps: .8 (on 12 volts)
Lumens: 684
Special Orders- Requirements
LED Light Color: 6000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Spot Beam Lux: 10,[email protected] 1 Meter - 1,[email protected] 3 Meters
11/18/2014
Page: 494
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 495
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LED Light Emitter on Trunnion Wall Mount - Extreme Environment - 12 Watt - 90'L X 70'W Beam- 9-42VDC
Part #: LEDLB-4ET
Price: $197.13
Buy American Compliant
The Larson Electronics LEDLB-4ET LED Light Bar offers high light output and extreme durability combined with a
versatile trunnion wall mounting system that provides 270 degrees of adjustability. This IP68 rated LED light bar is
waterproof to three meters and produces 720 lumens while drawing only 12 watts of power @1 amp from a 12 volt
electrical system. This light can run on any voltage from 9 to 42 volts and provides an extremely rugged lighting
solution that is ideal for use in commercial marine environments as well as industrial and manufacturing
applications such as machine vision system lighting, heavy equipment illumination, blasting lighting and mining
operations.
The LEDLB-4ET LED light bar from Larson Electronics produces a 90' long by 70' wide light beam with 720 lumens of
bright light. Four Edison EdixeonВ® Emitters containing CREE EZBrightВ® three watt LEDs producing 180 lumens each are
arranged in rows and paired with high purity 10 degree optics to produce a tightly focused spot beam with limited spread or
light spillage. We also offer optional floodlight versions with 35 degree optics to produce a wider beam spread and more
light over a larger area nearer the fixture, making flood versions ideal for use as work and area lights. These LED light bars
are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to
withstand the most demanding environments, conditions and applications. The entire Larson Electronics LEDLB-E series
are constructed of extruded aluminum and feature heavier housings, rubber isolated mounts and unbreakable
polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains, sand and high winds.
This light is equipped with a trunnion mounting bracket that allows operators to adjust the light fixture through 270 degrees
of movement.
11/18/2014
Page: 496
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This image shows a dark street, illuminated by nothing but distant street
lamps and suburban lighting.
The same street illuminated with the LEDLB-4ET, easily reaching distances
of 90' in length and 70' in width. .
Click Photo to Enlarge
Click Photo to Enlarge
*We have had excellent feedback from boat builders and other marine applications where they are able to create lighting effects on the mast, etc. that
typically cost 10 times as much but with little amp draw. Technically, the specification indicates a 1 amp draw per unit but the feedback we are getting
indicates the draw is substantially less. One boat builder in Houston indicated that the total draw of 12 units was under 2 amps. The efficiency of the
driver board makes this type of amp draw attractive for current constrained applications including small equipment, ATVs, boats and other applications
where banks of batteries without significant alternator support are the sole source of power. These units are also ideal for use in manufacturing and
industrial operations as machine lighting where severe vibration and excessive amounts of dirt and grime may be encountered.
11/18/2014
Page: 497
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the output of their
LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an advanced heat radiating fin
design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated Edison EdixeonВ® Emitters. The end
result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a
specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as a result. This multivoltage capability makes these units ideal for mobile and standalone applications such as those found on commercial boats, heavy equipment and
vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are impractical.
LEDLB-4ET 35В° Flood Beam
(Opt)
LEDLB-4ET 10В° Spot Beam
(Stnd)
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of
environmental and operating conditions. The LED lights with the �E’ part number designation are designed for extreme durability and are larger and nearly
twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are
waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum and the lenses are
unbreakable polycarbonate. The EdixeonВ® LEDs offer inherent LED resistance to shocks and vibrations contributing to these units 15.6Grms rating of
vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates, very cold areas and rough
saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme and stored in another temperature
extreme.
Adjustable Mounting: The trunnion wall mounting design on the LEDLB-4ET allows for post-installation angle positioning. This means that by loosening
2 thumb bolts located on either side of the light, the operator can adjust the positioning angle of this light 270 degrees. Then he/she would simply have to
tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle. We also offer a BC-2 bar clamp mounting system you can view
here for even greater mounting versatility.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD /
LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a
harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low
beam, modulating, IR/Visible combos) will have different Deutsch connectors. You can view the Deutsch Connector technical details here.
11/18/2014
Page: 498
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LEDLB-4ET LED Light Bar
LEDLB LED Features
LEDs: 4 EdixeonВ® 3 Watt LED Emitters
EdixeonВ® 3 Watt LED Emitters
Dimensions: 4"-L 3"-H 3.56"-D
LEDs Driven At 80%
Watts: 12
-40 C~ +80C Operating Temp Range
Voltage: 9-42 VDC
Spot Beam: 90'L x 70'W
Flood Beam: 70' L x 60'W
RoHS Compliant
Weight: 2.4 Lbs
70% Lumen Retention @65,000 hours
Lighting Configuration: 10В° Spot or 35В° Flood
LED Chip Op Temp -40C to +125C
Mounting: Adjustable Trunnion
IP68 Rated Waterproof to 3 meters
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps: 1 (on 12 volts) .5 (on 24 volts)
Lumens: 720
Special Orders- Requirements
LED Light Color: 6000K or 3000K
Contact us for special requirements
LED Life Expectancy: 50,000 hours
Toll Free: 1-800-369-6671
Optics Efficiency: 90%
Intl: 1-903-498-3363
Materials: Aluminum Housing, Polycarbonate Lens
E-mail: [email protected]
Housing Colors: Black or White
Lux-Flood : @Lens: 185,800 @ 1 Meter 2,672
Lux-Spot : @Lens: 190,400 @ 1 Meter 8,440
CE Certified
3 year warranty replacement on this LED light. After 30 days, the customer
ships the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement.
Scroll Down to Purchase-
11/18/2014
Page: 499
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- SpecSheet French
- SpecSheet Arabic
- Dimensional Drawing
- Manual
- SpectrumChart
11/18/2014
Page: 500
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LED Spreader Deck Light - 4 LEDS - White Aluminum Housing - 40' Flood Beam Diameter - 10.8 Watts
Part #: LED-SL-4
Price: $168.00
Made in the USA
The LED-SL-4 LED spreader light from Larson Electronics contains 4 LEDs and produces 972 lumens of bright white light in a circular
flood pattern while drawing only 10.8 watts on a 12 volt electrical system. This compact and fully sealed LED spreader light can be
operated on voltages ranging from 10 to 30 VDC and is ideal for use in marine environments as deck lighting, cockpit or cabin lighting
and anywhere a high quality, bright light is desired.
This LED spreader light is designed for marine use and is an ideal alternative to, or upgrade from, the common 55 watt halogen lamps used on
boats and yachts to illuminate bridges, cockpits, cabins and decks. These LED spreader lights produce 972 lumens of high quality light and draw
only 900mA when connected to a 12 volt electrical system, resulting in up to 80% lower power consumption when compared to the halogen
lamps they are designed to replace. The light produced by this unit is very evenly distributed in a circular flood pattern approximately 16' in
diameter and much purer and clean without the yellowish tint often associated with halogen or incandescent lamps. This LED light is completely
sealed making it IP67 compliant and waterproof.
Click here to read an article on the advantages of LED Boat lights over incandescent, fluorescent, or HID Boat lights.
This unit’s housing is constructed of die cast aluminum with a white powder coat finish for high durability and fully sealed against intrusion from
water or dust making it IP67 compliant. Measuring only 5.3 inches long by 1.6 inches wide, this very compact LED spreader light fixture is
designed for stud mounting with a single 1/4-20 stud mount on a pivoting bracket for easy installation. The pivoting bracket allows adjustment of
the fixture to any angle and a simple nylock secures the angle of the light once positioned. Connection to power is via two simple power leads
and the unit can be operated on voltages ranging from 10 or 30 VDC without any modifications necessary. The LEDs and sealed construction of
this unit provide 50,000+ hours of LED operation with minimal maintenance or upkeep requirements.
11/18/2014
Page: 501
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
LED-SL-4 LED Spreader Boat Light
Certification-Features
Lamp Type: LED
Adjustable Stud Mounting
Dimensions: 5.3"-L 1.6"-W
Die Cast aluminum housing
Watts: 10.8 Watts
IP 67 Compliant-Waterproof
Voltage: 10 or 30 VDC
Mounting: Single Stud Mount
Wiring: Conventional 2 Wire
Amps: 900mA (on 12 Volts)
Lumens: 972
LED Life Expectancy: 50,000+ hours
Materials: Die Cast Aluminum Housing
Special Orders- Requirements
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics at their expense. If the failure is a manufacturer defect, we
will ship a new replacement to the customer. If failure occurs within 30
days of receipt, Larson Electronics will provide a return label via email
to the customer. When the failed light is returned, Larson Electronics
will ship a new replacement.
Scroll Down to Purchase-
11/18/2014
Page: 502
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- Manual
11/18/2014
Page: 503
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
LED-BKT
Part #: LED-BKT
Price: $80.00
Buy American Compliant Trunion Mount U-Bracket for LED Light Bar
11/18/2014
Page: 504
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
BL6X10-LED-LENS
Part #: BL6X10-LED-LENS
Price: $10.00
Lens for BL6X10-LED
11/18/2014
Page: 505
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement