C-Bus Product Overview Catalogue, 5805

C-Bus Product Overview Catalogue, 5805
Catalogue
Clipsal Integrated Systems
Overview
Clipsal Australia first started from humble beginnings in 1920,
with a range of adjustable conduit fittings that ‘clips all’ sizes
of conduit, thus the name Clipsal was born. Almost 90 years
on, Clipsal has become one of the leading producers of
electrical products in its field.
As a company and brand, Clipsal has continuously developed
and evolved to meet the needs of commercial and domestic
building electrical requirements. Development in building
automation products led to the formation of CIS (Clipsal
Integrated Systems) in 2000, a business unit of Clipsal
Australia specialising in the manufacture of electronic lighting
control and building automation products. Since then CIS
has grown rapidly, gaining widespread acceptance in major
commercial and domestic markets.
Through extensive research and design, CIS developed the
C-Bus® Lighting Management System in 1994, and since
then C-Bus has become the cornerstone of CIS’ product
range. Initially, C-Bus was designed and manufactured for
commercial building applications. However, due to increasing
worldwide interest, C-Bus was adapted to suit the domestic
market with the release of C-Bus DIN Rail Series and
associated products.
With the development of C-Bus for domestic application, a
new generation of products was born including the C-Touch™
touch screens, Neo® wall switches, and Saturn™ wall
switches.
The C-Bus Saturn range of wall switches have proved a real
‘head turner’; manufactured from handcrafted glass with
bevelled edges, and apertures cut for its distinctive circular,
backlit buttons.
CIS continue to set new precedents by expanding the C-Bus
range. Introducing products such as the modular Architectural
and Professional ranges of High Powered Dimmers, C-Bus
Wireless Technology, Dynamic Labelling Technology (DLT™)
and the C-Bus Multi-Room Audio system. Not only is the
C-Bus product range extensive, but it also complies with
international product certification requirements such as the
C-Tick, CE and UL marks.
CIS have also recognised the changing requirements for
control systems in commercial buildings, particularly with
regards to the need to provide clients with one integrated
control solution. CIS have created interface platforms for
C-Bus such the BACnet Gateway, DALI Gateway and OPC
Server to meet this integrated solution need.
CIS is committed to ensuring the end-user gets the most out
of every C-Bus system. To assist in meeting this commitment,
CIS has created the following C-Bus installer programs.
C-Bus® Product Overview
APPROVED INSTALLER
C-Bus® Approved Installer Program
C-Bus® Approved Installers have been trained and accredited
by Clipsal as specialists in C-Bus technology and its
application. This is the first stage in the C-Bus accreditation
process and can lead to pointOne or Platium Partner status.
From system design, through to installation, then on to
programming and commissioning, a C-Bus Approved Installer
will ensure that your C-Bus system reaches its full potential,
delivering the best performance, functionality and most of all,
value for money.
Any building, whether it’s a home or a commercial site, is a
big investment. Don’t risk compromising the outcome with
just anyone. Insist on a C-Bus Approved Installer and get
confidence and peace of mind in knowing that you have the
backing of Clipsal, Australia’s number one in electrical building
products.
C-Bus® pointOne Program
C-Bus® pointOne is a group of specialist systems integration
companies that have the technical knowledge and practical
experience on a whole range of complimentary technologies to
enhance the functionality of your residential premises. The one
point of contact, C-Bus pointOne members make residential
lighting control and automation applications an easier process.
They do this by providing turnkey solutions for the design,
project management, installation, integration, programming
and support of Clipsal C-Bus and integration with products
from third party manufacturers.
C-Bus pointOne members are accredited integration
professionals, who have been trained in all aspects of the
Clipsal C-Bus system, with some having over 30 years of
industry experience.
C-Bus® Platinum Program
The aim of the C-Bus Platinum program is to link Clipsal
clients who have a commercial building project to a network of
professionals who are able to successfully deliver a complete
C-Bus Control and Management System, including integration
to other building services. From design to integration,
installation and programming, C-Bus Platinum partners can
assist commercial developers, consultants and designers
throughout the project delivery process. This ensures a smooth
delivery process with the highest quality C-Bus installation for
your commercial building.
Contents
C l i p s a l C - B u s ® O v e r v i ew
C -B u s ® I n p u t U n i t s
Wa l l S w it c h e s
G e n e ra l I n p u t U n it s
Pa s s ive I n f ra - r e d M o t io n D e t e c t o r s
I n f ra - r e d R e ce ive r s
To u c h S cr e e n s
C -B u s ® O u t p u t U n i t s
35
43
52
55
57
63
65
65
72
76
83
84
88
94
96
96
98
6
4
6
1923
25
30
35
A rc h i t e ct u ra l D im m e r s
P ro fe s s io n a l D im m e r s
D i n R a il D im m e r s
I n f ra - r e d O u t p u t U n it s
D i n R a il R e lay U n it s
S t a n d a r d R e lay U n it s
C -B u s ® S y s t e m U n i t s a n d A c c e s s o r i e s
W i s e r H o m e C o n t r o lle r
C -B u s ® S o f t w a r e
M u l t i - R o o m Au d i o S y s t e m
C -B u s ® E n a bl e d S e c u r i t y Pa n e l
C -B u s ® W i r e l e s s S y s t e m s
Wa l l S w it c h e s
Plug Adaptors
R e m o t e C o n t r o l U n it
W i re le ss G a t eway
C -B u s ® S ch e m a t i c s
3
Clipsal C-Bus
®
Overview
Introduction
The Clipsal C-Bus® system is a microprocessor based wiring
system to control lighting and other electrical services.
Whether ON/OFF control of a lighting circuit or analogue
type control such as dimming electronic fluorescent
ballasts, C-Bus® can control and automate virtually any type
of electrical load.
C-Bus® Network Design
Considerations
• Up to 1000m of C-Bus® Cat 5 UTP cable may be connected
to a single C-Bus® network
• Up to 100 C-Bus® units may be connected to a single
C-Bus® network
To ensure fast and reliable operation, each device has its own
in-built microprocessor, which can be individually programmed via
‘point and click’ PC based software, or via ‘Learn Mode’ which
doesn’t require a PC.
• Where more than 1 km and/or 100 standard C-Bus® units
are required, two or more networks can be created and linked
with C-Bus® Network Bridge and/or C-Bus® Ethernet
Interface Units
C-Bus® information is held within individual C-Bus® units rather
than one central point. This ensures optimum communications
speed and reliability.
• Maximum number of networks in one installation is 255
(this limitation does not apply if a C-Bus® Ethernet Interface is
utilised, the system size is then limited to IP Addressing only)
Whilst a computer is unnecessary for normal C-Bus® operation,
C-Bus® PC based control and management software is available
and provides additional flexibility to clients requiring this type
of control.
• Maximum number of networks connected in series to the
local network via Network Bridges is seven (i.e. using six
network bridges)
®
Clipsal C-Bus
for example.
is suitable for a wide range of applications,
Commercial Lighting Control
• Fluorescent lighting control for energy cost saving in high
rise buildings
• High-bay control in warehouses for energy cost saving
• Mood lighting in restaurants and retail outlets
• Flexible and integrated control of lighting and Audio Visual
equipment in board rooms
• Architectural lighting control for hotel foyers, ballrooms, art
galleries and museums.
• Each standard C-Bus® unit requires 18mA @ 36Vdc to operate
correctly. Some C-Bus® units, e.g. 5500PC require 32mA.
Some C-Bus® units, e.g. L5108D1A are self-powering and do
not take current from the 36V dc C-Bus® network
• More than one C-Bus® power supply can be connected to
a C-Bus® network to provide sufficient power to the C-Bus®
units, the C-Bus® power supplies will share the load evenly.
Maximum total power supply allowed is 2,000mA (2A)
• Any combination of power supply units is allowed as long as
the total power available is 2,000mA or less
• Each C-Bus® network requires only one network burden. This
network burden is software selectable on C-Bus® output units
Standalone Room Lighting Control
• Integrated automation via touch screen user interfaces for
conference rooms and home theatres
• Multiple scene / mood setting.
• Each C-Bus® network requires at least one system clockgenerating unit (for data synchronisation)
Residential Automation
• Home entertainment - Integrated audio visual, lighting control,
and other electrical services
• Security - Integrated security, lighting and other
electrical services
• Comfort – Dimming, scene setting
• Convenience – Multiple point control, central point control
from touch screens, automated time based control,
automated ‘Goodbye’ and ‘Welcome Home’ moods.
• Individual relay channels may be connected to different phases
• C-Bus® power supply units may be connected to different phases
• On L5508D1A and L5504D2A units the mains supply to
the units power supply and the mains supply to the output
channels must be on the same phase
• The isolation between the mains supply circuitry and the 36V
d.c. C-Bus® circuitry is greater than 3.75kV. This is achieved
using double wound transformers and opto isolators. This
means the C-Bus® wiring, connections and circuitry can be
considered extra low voltage
• C-Bus® Cat 5 UTP cable has mains rated sheathing which
means the C-Bus® cable can be taken inside electrical
Distribution Boards, provided segregation requirements of
local wiring standards are met.
4
C-Bus® Product Overview
C-Bus® Device Categories
Input Devices
Wall
Switches
Occupancy
Sensors
Environment
Sensors
Touch
Screens
Din Rail
Relays
Output Devices
Professional
Dimmers
Din Rail
Dimmers
System Devices
Network
Support Devices
Controllers
PC Software
Commissioning
Tools
Graphical User
Interfaces
Gateways
and Drivers
Multi-room
Audio Devices
Matrix
Switchers
Amplifiers
Speakers
Wireless
Devices
Wall
Switches
Plug
Adapters
Security
Devices
C-Bus Security
Panel
Security
Keypads
General
Inputs
Fluorescent
Controllers
Hand Held
IR Remotes
Infra-red
Transmitters
Gateways
Gateways
Hand Held
Remotes
Security
Accessories
Typical C-Bus® wiring schematics are shown on pages 98 & 99
5
C-Bus Input Units
®
Wall Switches
Dynamic Labelling Technology™
DLT - Saturn - rectangular series
™
• Available in Saturn™ and Neo® styles
• Saturn units feature an impact resistant glass fascia available
in white, black, cream and mid-brown
• Saturn unit also available with stainless steel fascia
• Neo units available in grey with brushed aluminium look inner
surround
5085DL-J80
Wall switch 5 button,
DLT™, stainless steel
• Units incorporate eight buttons for C-Bus® Group/Scene over
two pages (four buttons per page)
• Page/scroll button
• Each button can be programmed with on, off, toggle, dimmer,
timer, scene control and custom functions
• LCD labelling for each button
5085DL-PW
Wall switch 5 button,
DLT™, pure white
• Text, sliders and bitmaps can be defined and downloaded to
the unit via a C-Bus® network.
• Dimmable blue LED on each button
• Nightlight on all buttons or just the bottom button
• 64 x 128 pixel LCD screen
5085DL,GF
Wall switch 5 button,
DLT™, white
• Dimmable white LED backlighting for the LCD
• Ignore first button press option
• Fallback to page 1 option
• Real time clock display
• Programmed via C-Bus® Toolkit software
5085DL-680
Wall switch 5 button,
DLT™, black
• Draws 22mA from the C-Bus® network
• C-Bus® learn enabled.
5085DL-380
Wall switch 5 button,
DLT™, cream
5085DL-780
Wall switch 5 button,
DLT™, mid-brown
6
C-Bus® Product Overview
DLT - Neo
™
®
- rectangular series
5055DL,GB
Wall switch 5 button,
DLT™, battleship grey
5055DL,WE
Wall switch 5 button,
DLT™, white
7
C-Bus Input Units
®
Wall Switches
Saturn™ C-Bus® Wall Switches
Saturn™ - rectangular series
• Impact resistant glass fascia, available in pure white, white,
black, cream and mid-brown
• Available with stainless steel fascia
• 2, 4 or 6 buttons per wall switch
• Programmable as on, off, toggle, dimmer, timer, scene control
and custom functions
508xNL-J80
Wall switch,
rectangular, stainless steel
• Selectable blue and orange LED indicator on each button
configured through C-Bus® Toolkit software
• LED button indicators provide illumination and status
feedback
• Nightlight feature
• Fall back level option to dim indicators at a set time after the
last button press
508xNL-PW
Wall switch,
rectangular, pure white
• Mounted using standard mounting accessories (ordered
separately)
• Programmed via Learn Mode or the C-Bus® Toolkit software
• Draws 22mA from the C-Bus® network
• C-Bus® Learn Enabled.
508xNL,GF
Wall switch,
rectangular, white
508xNL-680
Wall switch,
rectangular, black
508xNL-380
Wall switch,
rectangular, cream
508xNL-780
Wall switch,
rectangular, mid-brown
‘x’ denotes number of buttons i.e. 2, 4 or 6 button
8
C-Bus® Product Overview
Saturn™ - accessories
Saturn™ - Mounting frames
5080LC-8
Pre-labelled button caps
individually printed with
commonly used labels
(pack of 66)
5850F,WE
Mounting frame, rectangular,
white (pack of 5)
This mounting frame accessory can be used in
conjunction with C-Bus® Saturn wall switches to provide
an alternative look to the switch edge for blending in with
the clients wall colour.
1
2
3
9
C-Bus Input Units
®
Wall Switches
Modena C-Bus Wall Switches
Modena - Series
• Available in white (WH) and black (BK)
LCH882,WH
Wall switch 2 button, White
• 2, 4 or 6 buttons per wall switch
• Programmable as on, off toggle, dimmer, timer, scene control
and custom functions
• Selectable blue and orange LED indicator on each button
configured through C-Bus® Toolkit software
• LED button indicators provide illumination and status
feedback
• Nightlight feature
LCH884,WH
Wall switch 4 button, White
• Fall back level option to dim indicators at a set time after the
last button press
• Mounted using standard mounting accessories (ordered
seperately)
• Programmed via Learn Mode or the C-Bus® Toolkit software
• Draws 22mA from the C-Bus® network
• C-Bus® Learn Enabled
10
C-Bus® Product Overview
LCH886,WH
Wall switch 6 button, White
Avanti C-Bus Wall Switches
Avanti - Series
• Rockers are a long throw momentary action type (‘spring
return’)
5091NL,WE
Wall switch 1 button, White
• Available in 1, 2 or 3 buttons per wall switch in white only
• Programmable as on, off toggle, dimmer, timer, scene control
and custom functions
• Selectable red and green LED indicator on each button
configured through C-Bus® Toolkit software
• LED button indicators provide illumination and status
feedback
• Nightlight feature
5092NL,WE
Wall switch 2 button, White
• Fall back level option to dim indicators at a set time after the
last button press
• Mounted using standard mounting accessories (ordered
seperately)
• Programmed via Learn Mode or the C-Bus® Toolkit software
• Draws 18mA from the C-Bus® network
• C-Bus® Learn Enabled
5093NL,WE
Wall switch 3 button, White
11
C-Bus Input Units
®
Wall Switches
Neo C-Bus Wall Switches
Neo - rectangular series
• Architecturally designed, modular C-Bus® wall switches
5052NL,GB
Wall switch 2 button
®
®
• Optional rocker cover with ID window for labelling of buttons
(ordered separately)
®
• Backlight for ID windows
• 2, 4 or 8 buttons per wall switch
• Integral infrared receiving window
• Programmed via C-Bus® installation software or via the learn
mode features
• Programmed as dimmers, timers, on/off toggle switches and
scene switches (up to 4 scenes per unit)
• Selectable blue and orange button LEDs configured through
C-Bus® Installation Software
• Available as standard in Battleship Grey (GB), White Electric
(WE), Cream (CM), Desert Sand (DS), Soft Grey (SG)
and Black (BK)
5054NL,GB
Wall switch 4 button
• Night-light feature
• Units use standard Australian mounting brackets and
wall boxes
• Units draw 22mA from a C-Bus® network
• C-Bus® Learn Enabled.
5058NL,GB
Wall switch 8 button
12
C-Bus® Product Overview
Neo - accessories
®
5038TX2
Neo® 8 button, hand-held
infrared remote control, for
Neo® switches (also suits
C-Bus® 30M Wall Switches,
C-Bus® Multisensor and
503xNIRL series wall switches)
5052NRI
Neo® rocker cover with
ID window (pack of 10)
13
C-Bus Input Units
®
Wall Switches
Reflection™ C-Bus Wall
Switches
®
• Architectural, flat stainless steel
C-Bus®
wall switches
Reflection™
R5061NL
Wall switch 1 button
• No visible screws
• 1, 2, 3, 4, 6 or 8 buttons per wall switch
• Available in brushed stainless steel
• Each button has an associated blue LED indicator providing
feedback status
• Programmed as dimmers, timers, on/off toggle switches and
scene switches (up to 4 scenes per unit)
• Programmed via C-Bus® installation software or via the learn
mode features
R5062VNL
Wall switch 2 button
• A custom wall box is required to mount this switch, standard
wall brackets and boxes can not be used
• Units draw 22mA from a C-Bus® network
• C-Bus® Learn Enabled.
R5063NL
Wall switch 3 button
R5064VNL
Wall switch 4 button
14
C-Bus® Product Overview
2000 Series C-Bus
Wall Switches
®
R5066NL
Wall switch, 6 button
5031NL
Wall switch, 1 button, rectangular
5032NL
Wall switch, 2 button, rectangular
5034NL
Wall switch, 4 button, rectangular
5031NL
R5068NL
Wall switch, 8 button
• May be programmed as dimmers, timers and on/off
toggle switches
• 1, 2 or 4 buttons per wall switch
• Each unit features a programmable status indicator
• Available in a wide range of colours
• Units draw 18mA from a C-Bus® network
• C-Bus® Learn Enabled
Reflection™ - accessories
R5060WB
Wallbox to suit Reflection™
range of wall switches
Important note: This wall box must
be used to install Reflection™
Wall switches
Classic C2000 Series C-Bus
Wall Switches
®
C5031NL
Wall switch, 1 button
C5032NL
Wall switch, 2 button
C5034NL
Wall switch, 4 button
C5031NL
• May be programmed as dimmers, timers and on/off
toggle switches
• 1, 2 or 4 buttons per wall switch
• Each unit features a programmable status indicator
• Available in a wide range of colours
• Units draw 18mA from a C-Bus® network
• C-Bus® Learn Enabled
15
C-Bus Input Units
®
Wall Switches
Slimline™ SC2000 Series C-Bus
Wall Switches
Metal Plate and Multi-Gang
C-Bus Wall Switches
SC5031NL Wall switch 1 button, orange LED
®
®
SC5032NL
Wall switch 2 button, orange LED
• May be programmed as dimmers, timers and on/off
toggle switches
SC5034NL
Wall switch 4 button, orange LED
• Each button features a programmable LED status indicator
SC5031NLB
Wall switch 1 button, blue LED
SC5032NLB
Wall switch 2 button, blue LED
SC5034NLB
Wall switch 4 button, blue LED
• Available in stainless steel and brass finishes
• The button dollies are available in White, Black or Brown
SC5031NL
• May be programmed as dimmers, timers and
on/off toggle switches
• Wall boxes are supplied when ordering 8 gang or
higher configurations
• 1, 2 or 4 buttons per wall switch
• Each button features a programmable LED status indicator
• C-Bus® Learn Enabled.
• Units draw 18mA from a C-Bus® network
• C-Bus® Learn Enabled.
‘A’ Style Deep Curved Plate
Eclipse SL2000 Series C-Bus
Wall Switches
SL5031NL
Wall switch 1 button, orange LED
SL5032NL
Wall switch 2 button, orange LED
SL5034NL
Wall switch 4 button, orange LED
SL5031NLB
Wall switch 1 button, blue LED
SL5032NLB
Wall switch 2 button, blue LED
SL5034NLB
Wall switch 4 button, blue LED
• May be programmed as dimmers, timers and
on/off toggle switches
• 1, 2 or 4 buttons per wall switch
• Each button features a programmable LED
status indicator
• Contact Clipsal when ordering above 24 gang
• Each 4 gang unit array draws 18mA from a C-Bus® network
• Available in a wide range of colours
®
• The B style metal plate range is available in up to 132
gang configuration
- stainless steel
®
A5031NL
Wall switch 1 button
A5032NL
Wall switch 2 button
A5034NL
Wall switch 4 button
A5032NL
SL5031NL
‘B’ Style Flat Plate
- stainless steel
B5031NL
Wall switch 1 button
• Available in a wide range of colours
B5032NL
Wall switch 2 button
• Units draw 18mA from a C-Bus® network
B5034NL
Wall switch 4 button
• C-Bus® Learn Enabled.
B5032NL
16
C-Bus® Product Overview
‘A’ Style Deep Curved Plate
- brass
BA5031NL
Wall switch 1 button
‘B’ Style Stainless Steel
Flat Plate
5008S164/3L
Wall switch 8 button
BA5032NL
Wall switch 2 button
5012S164/4L
Wall switch 12 button
BA5034NL
Wall switch 4 button
5016S164/6L
Wall switch 16 button - horizontal
BA5032NL
5016S162/3L
Wall switch 16 button - vertical
5024S164/8L
5020S164/7L
Wall switch 20 button
‘B’ Style Flat Plate
5024S164/8L
Wall switch 24 button - horizontal
- brass
BB5031NL
Wall switch 1 button
‘B’ Style Brass
Flat Plate
BB5032NL
Wall switch 2 button
BB5034NL
Wall switch 4 button
5008B164/3L
Wall switch 8 button
BB5032NL
5012B164/4L
Wall switch 12 button
5020B164/7L
Wall switch 20 button
5024B164/8L
Wall switch 24 button - horizontal
5024B164/8L
17
C-Bus Input Units
®
Wall Switches
C-Bus 30M Wall Switches
C-Bus - 30M series
• Mounts into any Clipsal grid plate with a 30M aperture
(ordered separately)
5031NMMIRL
30M Wall Switch
Master + IR, White
®
• Available in master and slave mechanisms
®
• Master mechanism can accommodate up to 3 slaves
• Master available in IR or non-IR variants
• Programmable as on, off, toggle, dimmer, timer, scene
control and custom functions
• Selectable blue and orange LED indicator configured through
C-Bus Toolkit software
• LED button indicator provides illumination and status
feedback
• Nightlight feature
5031NMML
30M Wall Switch
Master, White
• Fall back level option to dim indicator at a set time after the
last button press
• Programmed via Learn Mode or the C-Bus® Toolkit software
• Draws 18mA from the C-Bus® network
• Labelling option for each button
• Available in white only
• C-Bus® Learn Enabled
18
C-Bus® Product Overview
5031NMS
30M Wall Switch
Slave, White
C-Bus Input Units
®
General Input Units
General Analogue/Digital
Input Unit
Bus Coupler Input Units
5504GI
General input unit, 4 channel
5104BCL
Bus coupler input unit, 4 channel
• Four channel general input unit, DIN rail mounted
• 8M DIN Modules Wide
• Dimensions 144mm x 85mm x 65mm
• Used to interface a C-Bus® system to third party products
such as light level sensors, current sensors, temperature
sensors, CO2 detectors, differential sensors, pressure
sensors, flow rate sensors, moisture probes etc
• Designed to either trigger the state of a C-Bus® group
address as a function of input level or broadcast a message
on the C-Bus® network, representing the input level
• Maximum of 10 units on a single C-Bus® network
5102BCLEDL
Bus coupler input unit, 2 channel, with remote LED facility
• Can be used to measure analogue values (0-1V, 0-5V,
0-10V, 0-20V, 0-20mA, 4-20mA, 500 Ohm, 1k Ohm, 3k
Ohm and 10k Ohm thermistor inputs)
• 5104BCL used to interface up to 4 standard voltage
free mechanical switches, including latching and toggle
switches to C-Bus®
• Requires a 24V d.c. connection (power pack included)
• 5104BCL supports onboard scenes
• Units draw 18mA from a
C-Bus®
network.
• 5102BCLEDL used to interface up to 2 standard voltage
free mechanical switches, including latching and toggle
switches to C-Bus®, incorporates remote LED facility
• Dimensions 55mm x 49mm x 18mm
• The unit is designed to fit into a standard wall box
• Each unit features a programmable status indicator
• The maximum distance between the unit and an external
voltage free switch is limited to 1 metre (use L5504AUX if
longer distance required)
• Units draw 18mA from a C-Bus® network
• C-Bus® Learn Enabled.
19
C-Bus Input Units
®
General Input Units
DIN Rail Mounted
Auxiliary Input Unit
Temperature Sensor
L5504AUX
Auxiliary input module, 4 channel
5031RDTSL,WE
Temperature sensor, 0 - 50 degrees centigrade
• Four channel auxiliary input module, DIN rail mounted
• Used to measure and regulate either heating or cooling in
the range 0 - 50 degrees centigrade
• 4M DIN Modules Wide
• Dimensions 72mm x 85mm x 65mm
• Permits voltage free switches to be connected to C-Bus®,
such as Clipsal 30 Series mechanisms, limit switches and
weatherproof switches
• Each unit features a programmable status indicator
• The unit may be programmed in the same way as a wall
switch, to achieve the same functions such as timer,
dimmer or toggle switches
• Draws 18mA from a C-Bus® network
• C-Bus® Learn Enabled
• Digital sensor (doesn’t require calibration in the field)
• Programmable target temperature and margin on
installation
• Programmable set back temperature for when room is
unoccupied
• Broadcast of temperature over C-Bus® network
• Adjustable temperature broadcast interval
• Temperature offset capabilities
• Provides additional zone sensors for the C-Bus® 4 zone
Thermostat
• Units draw 18mA from a C-Bus® network
20
C-Bus® Product Overview
Light Level Sensor
Light Level Sensor
• Used to measure and regulate lighting in the range of 40
– 1600lux
5031PE,WE
Light level sensor, 40 - 1600lux
• Programmable target light level as well as the margin on
installation
• Each unit features a programmable status indicator
• Can be used to achieve bank switching or continuous
dimming
• Available in outdoor weatherproof 56 series enclosure
• Units draw 18mA from a C-Bus® network
5031PEWP,GY
Light level sensor, 40 - 1600lux,
weatherproof
21
C-Bus Input Units
®
General Input Units
Single Zone Thermostat
5070THBR
C-Bus® thermostat,
programmable, single zone
with 5 relays (relays for
HVAC plant control only, not
accessibile via C-Bus®)
4 Zone Thermostat
with programmable
time scheduling
5070THPR
C-Bus® thermostat, programmable, 4 zone,
with 5 Relays (relays for HVAC plant control
only, not accessible via C-Bus®)
5070THB
C-Bus® thermostat,
programmable, single zone,
no on board HVAC plant
control relays
5070THP
C-Bus® thermostat,
programmable, 4 zone,
no on board HVAC plant
control relays
• Single zone C-Bus® thermostat
• Four zone (plus the common zone) programmable
C-Bus® thermostat
• Wall Mounted
• Dimensions 92mm x 127mm x 24mm
• Support for control of HVAC units via C-Bus® or the
internal HVAC relays (‘RWG’ control)
• Manually adjustable temperature set point and mode of
operation (heating, cooling or ventilation)
• The unit includes fan speed control and a ‘Setback’ or
‘Economy’ Mode
• Easy to use operator interface includes an integral LCD
to display the current temperature and mode of operation
• Draws 40mA from a C-Bus® network.
• Wall mounted
• Dimensions 105mm x 149mm x 24mm
• Support for control of HVAC units via C-Bus® or directly
using on board HVAC relays (RWG control)
• Manually adjustable temperature set point, mode
of operation (heating, cooling or ventilation) and
time schedules
• On board 7 day HVAC time scheduling (user
programmable), manual fan speed control, and
setback mode
• Easy to use interface, comprising of an LCD, manual
control buttons and a rotating dial with an integral
press switch
• Draws 40mA from a C-Bus® network.
22
C-Bus® Product Overview
Passive Infrared Motion
Detector - Outdoor
Passive Infrared Motion
Detector - Indoor
5750WPL
Occupancy sensor,
infrared, IP66, outdoor
5751L
Occupancy sensor,
infrared, indoor,
corner mount
• PIR motion sensor suitable for outdoor use
• PIR motion sensor suitable for indoor use
• The unit has a field of view of 110° and a detection range
which extends 18 metres
• The unit has a coverage range of 6m x 6m and a field of
view of 90°
• The unit features a light threshold adjustment on the unit
• The unit features a light threshold adjustment on the unit
• The time delay is programmable in the range 1 second to
18 hours
• The time delay is programmable in the range 1 second to
18 hours
• Features a sunset switch program
• Features a sunset switch program
• Draws 18mA from a C-Bus® network
• Draws 18mA from a C-Bus® network
23
C-Bus Input Units
®
General Input Units
Passive Infrared Motion
Detectors - 360°
Multisensor
5753L
Occupancy sensor, infra-red,
indoor, flush mount, 360°
5753PEIRL
Multisensor, combined
occupancy sensor, light level
sensor and IR receiver
• 360°, flush, ceiling mount PIR motion sensor
• Flush mount design with 360° detection pattern
• Suitable for indoor use
• Capable of controlling up to 8 C-Bus® Scenes or 8 C-Bus®
Group Addresses
• The unit has a coverage range of 6m x 6m and a field of
view of 360°
• The unit features a light threshold adjustment on the unit
• The time delay is programmable in the range 1 second to
18 hours
• Supports the ‘Corridor Linking’ feature for commercial
building applications
• Three LEDs indicate a range of actions from movement, to
the receiving of IR commands and the device’s status
• Features a Sunset Switch program
• Light and PIR sensitivity are set via adjustment screws
located on the sensor unit
• Draws 18mA from a C-Bus® network
• Dual element detectors minimise false triggering
• Refer to 5753PEIRL Installation Instruction for location and
mounting details
• An LED status indicator on the unit is used to report the
current state of the load controlling device
• Draws 18mA from a C-Bus® network
• C-Bus® Learn Enabled
24
C-Bus® Product Overview
Infra-red Receivers
• Wall mounted IR receiver incorporating 4 stations
of IR receivers
Classic C2000 Series
C5031NIRL
4 channel infra-red receiver
• Available with or without C-Bus® buttons
• May be programmed to achieve functions such as a
dimmer, timer or toggle switch
• Units draw 18mA from a C-Bus® network
• C-Bus® Learn Enabled.
2000 Series
C5034NIRL
4 channel infra-red receiver
with 4 buttons
5031NIRL
4 channel infra-red receiver,
rectangle
5034NIRL
4 channel infra-red receiver with
4 keys
Slimline™ SC2000 Series
SC5031NIRL
4 channel infra-red receiver
SC5034NIRL
4 channel infra-red receiver
with 4 buttons
25
C-Bus Input Units
®
General Input Units
Eclipse SL2000 Series
®
SL5031NIRL
4 channel infra-red receiver
SL5034NIRL
4 channel infra-red receiver
with 4 buttons
26
C-Bus® Product Overview
C-Bus Input Units
®
Remote Controls
C-Bus Hand-held
Infra-red Transmitters
Universal Infra-red
Remote Control Unit
• Works in conjunction with the infra-red receivers
on page 25
• Universal, hand held, infrared remote control unit for
control of electronic devices equipped with an infrared
(IR) remote
®
• 4 channel and 12 channel units available
• The 4 channel device controls bank A of the receivers
• Control of up to 16 devices including C-Bus®, DVDs, TVs,
satellite receivers, VCRs and CDs
• The 12 channel device controls banks A, B and C
of the infra-red receivers
• Large touch screen display
• Range up to 15 metres (line of sight).
• LED indicators provide information and feedback on:
• Blue LED backlighting
o Status of the beep feature (audible button
press confirmation)
o ‘Battery low’ warning
o Confirmation of a successfully transmitted infrared code
5034TX
4 button hand-held
infra-red transmitter
o Error warning
o Touch screen page number.
• User programmable buttons for each device include 7
rubber buttons and 48 touch screen buttons
• Quick Control buttons
• Sleep button
• Page / date button
• Pre-programmed manufacturer codes for many models
• Incorporates imbedded C-Bus® IR codes for the C-Bus®
5038TX and 5035TX IR remote controls
5034TX12
12 button hand-held
infra-red transmitter
• Easy to configure with new IR codes using the
“learning eye”
• Macro function (up to 60 commands per macro)
• Learning IR codes from existing remote controls.
5030URC
Universal Infra-red Remote
Control Unit, with LCD
touch screen
27
C-Bus Input Units
®
Remote Controls
C-Bus Hand-held
Infra-red Transmitters
®
• Designed for use with C-Bus® 30M Wall Switches,
C-Bus® Neo Wall Switches, C-Bus® Multisensor and the
503xNIRL series wall switches
• 4 and 8 button version available
• Range of up to 15 metres (line of sight)
• Features IR Bank selection switch with each group
of four buttons assigned to either bank A/B bank C/D.
• The bank selection is changed by removing the
back cover.
28
C-Bus® Product Overview
5084TX
4 button C-Bus® Infared
Remote Control with holder
C-Bus Input Units
®
5088TX
8 button C-Bus® Infared
Remote Control
with holder
5080TXC
C-Bus® Remote
Control Holder (spare)
29
C-Bus Input Units
®
Touch Screens
C-Touch 6.4 Inch Colour
Touch Screens
C-Touch 6.4 Inch Colour
Touch Screen - Saturn™ Series
• Available in Neo®, flat stainless steel and Saturn™ Glass
style surrounds
5080CTC2-PW
Colour touch screen, 6.4
inch colour, pure white
glass facia, less wall box,
less power supply
• 6.4” (diagonal), VGA, 640 x 480 pixels, colour LCD screen
• Displays pages of graphical items, such as buttons,
sliders and images that perform C-Bus® related functions
when pressed
• Includes a real time clock for automatic scheduling of
events based on the time of day, week, month or year
• Controllable via an Infra-red hand held remote control unit
• Fully customised to suit user requirements via the included
Windows™ compatible configuration software
5080CTC2,GF
Colour touch screen, 6.4
inch colour, white glass
facia, less wall box, less
power supply
• The software includes a logic engine module that allows
the installer to program logic based (if-then-else) control
into the touch screen configuration
• Connects directly to a C-Bus® network (no external C-Bus®
PC Interface required)
• Control and monitor devices connected to C-Bus®, ethernet
and RS-232 (custom ethernet and RS-232 support via the
included logic programming language)
5080CTC2-6
Colour touch screen, 6.4
inch colour, black glass
facia, less wall box, less
power supply
• Unit programmable via an ethernet connection
• Client / server plugin for Windows™ Media Player
• Animated buttons with more than 256 animation
frames supported
• Fully customisable graphics including bar graphs, sliders,
percentage indicators, images, gauges and clocks with any
border and background style
• Supports web page embedding
5080CTC2-3
Colour touch screen, 6.4
inch colour, cream glass
facia, less wall box, less
power supply
• Supports IP camera inputs
• Supports project theme templates
• Audio WAV file support
• Scene control
• Event Scheduling support
• Irrigation control
• Password access control
• Dimensions: 246mm x 173mm x 72.5mm (excluding
fascia).
30
C-Bus® Product Overview
5080CTC2-7
Colour touch screen, 6.4
inch colour, mid-brown glass
facia, less wall box, less
power supply
C-Bus Input Units
®
C-Touch 6.4 Inch Colour
Touch Screen - Neo Series
C-Touch 6.4 Inch Colour
Touch Screen - Accessories
5050CTC2,GB
Colour touch screen,
6.4 inch colour, neo
battleship grey facia,
less wall box, less
power supply
5000CTCWB
Wall box for 6.4 inch
colour touch screen
5050CTC2,WE
Colour touch screen,
6.4 inch colour, neo white
facia, less wall box, less
power supply
5000CTCNA
Nail bracket for 6.4 inch
colour touch screen
®
Colour Touch Screen
- Metal Plate Series
BS5000CTC2
‘B’ style metal plate
colour touch screen,
6.4 inch colour, stainless
steel style facia, less wall
box, less power supply
5000CTCRM
Gyproc™ bracket for 6.4 inch
colour touch screen
5000CTCPS/2
Power supply for 6.4 inch
colour touch screen, V2
5035TX2
Remote control to suit C-Bus®
Touch Screen (spare).
31
C-Bus Input Units
®
Touch Screens
C-Touch Spectrum Colour
Touch Screens
C-Touch Spectrum Colour
Touch Screens
Saturn series - Wall Mount
• Wall mount or desk mount, touch sensitive colour LCD
touch screen
C-5080CT2 and C-5080CTL2
Colour Touch Screen, Saturn
glass fascia. Available in
pure white (-PW), white
(,GF), black (-6), cream (-3)
and mid-brown (-7) and also
with and without C-Bus®
Logic Engine
• Displays ‘pages’ of graphical items, such as buttons, sliders
and images that can perform C-Bus® related functions
when pressed
• 320 x 240 pixel 65k colour LCD resolution
• Adjustable LED backlighting with ambient light compensation
• Powered from C-Bus®
• Proximity sensing for wake-up and control functions
• Anti-fingerprint screen
• Available with or without C-Bus® Logic Engine features
• Programmed via a standard USB port (easily accessible)
• USB port can be used as a PC interface to a C-Bus® System
Neo series - Wall Mount
C-5050CT2 and C-5050CTL2
Available in grey/brushed
aluminium (,GB), white
(,WE), black (,BK) and
white/brushed aluminium
(-28) and also with and
without C-Bus® Logic Engine
• Separate RS-232 port is included for third party device
integration (C-Bus® Logic Engine model only)
• Compatible with Version 4 of Clipsal’s Windows® based drag
and drop programming software (PICED)
Metal series - Wall Mount
• Real time clock included for automatic scheduling of events
• Allows control from infra-red hand held remote control
• Wide range of fascia colours and styles available (Saturn, Neo,
Metal and Plastic versions)
C-Bx5000CT2 and C-Bx5000CTL2
Available in stainless
steel (BS) and brass (BB)
and also with and without
C-Bus® Logic Engine
• Dimensions 195mm x 136mm x 41.7mm (Saturn model)
• Units draw 75mA and are powered from C-Bus® (separate
power supply not required)
• Wall box ordered separately
Plastic series - Wall Mount
C-SC5000CT2 and C-SC5000CTL2
Available in white (,WE),
black (,BK) and cream (,CM)
and also with and without
C-Bus® Logic Engine
32
C-Bus® Product Overview
C-Bus Input Units
®
B&W MkII Touch Screens
B&W MkII Touch Screens
Saturn series - Wall Mount
• Wall mount or desk mount, touch sensitive black and white
LCD touch screen
5080CT2 and 5080CTL2
B&W MkII Touch Screen,
Saturn glass fascia. Available
in pure white (-PW), white
(,GF), black (-6), cream (-3)
and mid-brown (-7) and also
with and without C-Bus®
Logic Engine
• Displays ‘pages’ of graphical items, such as buttons, sliders
and images that can perform C-Bus® related functions
when pressed
• LCD resolution of QVGA (320 pixels x 240 pixels)
• Adjustable LCD screen backlighting with ambient light
compensation
• LCD uses white on black technology to enhance clarity
• Available with or without C-Bus® Logic Engine features.
• Programmed via a standard USB port (easily accessible)
• USB port can be used as a PC interface to a C-Bus® System
• Separate RS-232 port is included for third party device
integration (C-Bus® Logic Engine model only)
Neo series - Wall Mount
5050CT2 and 5050CTL2
Available in grey/brushed
aluminium (,GB), white
(,WE), black (,BK) and
white/brushed aluminium
(-28) and also with and
without C-Bus® Logic Engine
• Compatible with Version 4 of Clipsal’s Windows® based drag
and drop programming software (PICED)
• Real time clock included for automatic scheduling of events
• Allows control from infra-red hand held remote control
• Wide range of fascia colours and styles available (Saturn, Neo,
Metal and Plastic versions)
• Dimensions 195mm x 136mm x 41.7mm (Saturn model)
• Units draw 65mA and are powered from C-Bus® (separate
power supply not required).
Metal series - Wall Mount
Bx5000CT2 and Bx5000CTL2
Available in stainless steel
(BS) and brass (BB) and
also with and without
C-Bus® Logic Engine
• Wall box ordered separately
Plastic series - Wall Mount
SC5000CT2 and SC5000CTL2
Available in white (,WE),
black (,BK) and cream (,CM)
and also with and without
C-Bus® Logic Engine
33
C-Bus Input Units
®
Touch Screens
Desktop Touch Screens
C-Touch Spectrum Colour
C-5000CTD2-WE
C-Touch Spectrum desktop
touch screen, white
C-5000CTDL2-WE
C-Touch Spectrum desktop
touch screen with C-Bus Logic
Engine, white
C-5000CTD2-BK
C-Touch Spectrum desktop
touch screen, black
C-5000CTDL2-BK
C-Touch Spectrum desktop
touch screen with C-Bus Logic
Engine, black
C-5000CTD2-GY
C-Touch Spectrum desktop
touch screen, grey
C-5000CTDL2-GY
C-Touch Spectrum desktop
touch screen with C-Bus Logic
Engine, grey
B&W MkII
5000CTD2,WE
B&W MkII desktop touch
screen, white
5000CTDL2,WE
B&W MkII desktop touch screen
with C-Bus Logic Engine, white
5000CTD2,BK
B&W MkII desktop touch
screen, black
5000CTDL2,BK
B&W MkII desktop touch screen
with C-Bus Logic Engine, black
5000CTD2,GY
B&W MkII desktop touch
screen, grey
5000CTDL2,GY
B&W MkII desktop touch screen
with C-Bus Logic Engine, grey
34
C-Bus® Product Overview
C-Touch Spectrum and B&W
MkII Touch Screen Accessories
5000CT2WB
Wall box for wall mount model
5000CT2RS232
RS232 lead for integrating
with third party devices
(Logic Engine model only)
5035TX2
Remote control to suit C-Bus®
Touch Screen (spare)
C-Bus Output Units
®
Dimmer Units
Architectural High Powered
Dimmers
• Modular design with individual dimmer channel cards
• Soft start load turn-on protects lamp filaments
• Voltage compensation to minimise load brightness
variation if the a.c. supply voltage drifts
• Filtering reduces supply voltage signalling effects
Architectural High Powered
Dimmers
Non RCD models
L5112DxxUA
12 Channel C-Bus®
Architectural Dimmer
Available in 5 Amp and
10 Amp models
• Linear output load power following input control
• Universal dimming technology auto detects load type
• C-Bus® network burden and system clock generator
• After mains fail, dimmers return to previous or
preset values
• Local C-Bus® override switches on front panel
• Channel Status indicators on front control panel
• On-board MCB protection
• Mounting brackets included for ease of installation
• Generous load and mains supply terminals
L5106DxxUA
6 Channel C-Bus®
Architectural Dimmer
Available in 5 Amp, 10
Amp, 16 Amp and 20
Amp models
• Emergency lighting output for each channel
• Manual dimmer bypass switch on all channels
• Fan-free operation, reduces maintenance requirements
• Suitable for single or three phase track lighting
applications with optional three phase MCBs
• Support for 128 on board lighting scenes
L5103DxxUA
3 Channel C-Bus®
Architectural Dimmer
• Full integration with DMX512
Available in 5 Amp, 10 Amp,
16 Amp and 20 Amp models
• Selectable pre defined dimming curves
• Three prioritised auxiliary inputs
• Standby generator input
• Cross fading scene functions
• Optional Relay / DSI / DALI / 0-10V d.c. ballast card
• Complies with Australian (AS/NZS CISPR 15:2002) and
International standards for light dimmers.
35
C-Bus Output Units
®
Dimmer Units
Architectural High Powered
Dimmers
12 Channel non RCD models
L5112D10UA
12 Channel C-Bus®
Architectural Dimmer,
Universal – 10A per
channel
L5112D5UA
12 Channel C-Bus®
Architectural Dimmer,
Universal – 5A per channel
36
C-Bus® Product Overview
Architectural High Powered
Dimmers
6 Channel non RCD models
Architectural High Powered
Dimmers
6 Channel non RCD models
L5106D20UA
6 Channel C-Bus®
Architectural Dimmer,
Universal – 20A per
channel
L5106D5UA
6 Channel C-Bus®
Architectural Dimmer,
Universal – 5A per
channel
L5106D16UA
6 Channel C-Bus®
Architectural Dimmer,
Universal – 16A per
channel
L5106D10UA
6 Channel C-Bus®
Architectural Dimmer,
Universal – 10A per
channel
37
C-Bus Output Units
®
Dimmer Units
Architectural High Powered
Dimmers
3 Channel non RCD models
Architectural High Powered
Dimmers
3 Channel non RCD models
L5103D20UA
3 Channel C-Bus®
Architectural Dimmer,
Universal – 20A per
channel
L5103D5UA
3 Channel C-Bus®
Architectural Dimmer,
Universal – 5A per channel
L5103D16UA
3 Channel C-Bus®
Architectural Dimmer,
Universal – 16A per
channel
L5103D10UA
3 Channel C-Bus®
Architectural Dimmer,
Universal – 10A per
channel
38
C-Bus® Product Overview
Architectural High Powered
Dimmers
• Modular design with individual dimmer channel cards
• Soft start load turn-on protects lamp filaments
• Voltage compensation to minimise load brightness
variation if the a.c. supply voltage drifts
• Filtering reduces supply voltage signalling effects
Architectural High Powered
Dimmers
RCD models
L5112DxxUARx
12 Channel C-Bus®
Architectural Dimmer
Available in 5 Amp and
10 Amp models
• Linear output load power following input control
• Universal dimming technology auto detects load type
• C-Bus® network burden and system clock generator
• After mains fail, dimmers return to previous or
preset values
• Local C-Bus® override switches on front panel
• Channel Status indicators on front control panel
• On-board MCB and RCD protection
• Mounting brackets included for ease of installation
L5106DxxUARx
6 Channel C-Bus®
Architectural Dimmer
Available in 5 Amp,
10 Amp, 16 Amp and
20 Amp models
• Generous load and mains supply terminals
• Emergency lighting output for each channel
• Manual dimmer bypass switch on all channels
• Fan-free operation, reduces maintenance requirements
• Suitable for single or three phase track lighting
applications with optional three phase MCBs and RCDs
• Support for 128 on board lighting scenes
• Full integration with DMX512
• Selectable pre defined dimming curves
L5103DxxUARx
3 Channel C-Bus®
Architectural Dimmer
Available in 5 Amp,
10 Amp, 16 Amp and
20 Amp models
• Three prioritised auxiliary inputs
• Standby generator input
• Cross fading scene functions
• Optional Relay / DSI / DALI / 0-10V d.c. ballast card
• Complies with Australian (AS/NZS CISPR 15:2002) and
International standards for light dimmers.
39
C-Bus Output Units
®
Dimmer Units
Architectural High Powered
Dimmers
12 Channel RCD models
L5112D10UAR6
12 Channel C-Bus®
Architectural Dimmer,
Universal – 10A per
channel (6 RCDs on-board)
L5112D5UAR6
12 Channel C-Bus®
Architectural Dimmer,
Universal – 5A per channel
(6 RCDs on-board)
40
C-Bus® Product Overview
Architectural High Powered
Dimmers
6 Channel RCD models
Architectural High Powered
Dimmers
6 Channel RCD models
L5106D20UAR6
6 Channel C-Bus®
Architectural Dimmer,
Universal – 20A per
channel (6 RCDs
on-board)
L5106D5UAR3
6 Channel C-Bus®
Architectural Dimmer,
Universal – 5A per channel
(3 RCDs on-board)
L5106D16UAR6
6 Channel C-Bus®
Architectural Dimmer,
Universal – 16A per
channel (6 RCDs
on-board)
L5106D10UAR3
6 Channel C-Bus®
Architectural Dimmer,
Universal – 10A per
channel (3 RCDs
on-board)
41
C-Bus Output Units
®
Dimmer Units
Architectural High Powered
Dimmers
3 Channel RCD models
Architectural High Powered
Dimmers
3 Channel RCD models
L5103D20UAR1
3 Channel C-Bus®
Architectural Dimmer,
Universal – 20A per
channel (1 RCD on-board)
L5103D5UAR1
3 Channel C-Bus®
Architectural Dimmer,
Universal – 5A per channel
(1 RCD on-board)
L5103D16UAR1
3 Channel C-Bus®
Architectural Dimmer,
Universal – 16A per
channel (1 RCD on-board)
L5103D10UAR1
3 Channel C-Bus®
Architectural Dimmer,
Universal – 10A per
channel (1 RCD on-board)
42
C-Bus® Product Overview
Professional High Powered
Dimmers
• Modular design with individual dimmer channel cards
• Soft start load turn-on protects lamp filaments
• Voltage compensation to minimise load brightness
variation if the a.c. supply voltage drifts
• Filtering reduces supply voltage signalling effects
Professional High Powered
Dimmers
Non RCD models
L5112DxxLP
12 Channel C-Bus®
Professional Dimmer,
LE Available in 3 Amp, 5
Amp, 10 Amp, 16 Amp
and 20 Amp models
• Linear output load power following input control
• C-Bus® network burden and system clock generator
• After mains fail, dimmers return to previous or
preset values
• Local C-Bus® override switches on front panel
• Channel Status indicators on front control panel
• On-board MCB protection
• Mounting brackets included for ease of installation
• Generous load and mains supply terminals
L5106DxxLP
6 Channel C-Bus®
Professional Dimmer,
LE Available in 3
Amp, 5 Amp, 10 Amp,
and 20 Amp models
• Emergency lighting output for each channel
• Manual dimmer bypass switch on all channels
• Fan-free operation, reduces maintenance requirements
• Suitable for single or three phase track lighting
applications with optional three phase MCBs
• Complies with Australian (AS/NZS CISPR 15:2002) and
International standards for light dimmers.
L5103DxxLP
3 Channel C-Bus®
Professional Dimmer,
LE Available in 5 Amp,
10 and 20 Amp models
43
C-Bus Output Units
®
Dimmer Units
Professional High Powered
Dimmers
12 Channel non RCD models
Professional High Powered
Dimmers
12 Channel non RCD models
L5112D20LP
12 Channel C-Bus®
Professional Dimmer,
LE - 20A per channel
L5112D5LP
12 Channel C-Bus®
Professional Dimmer,
LE - 5A per channel
L5112D16LP
12 Channel C-Bus®
Professional Dimmer,
LE - 16A per channel
L5112D3LP
12 Channel C-Bus®
Professional Dimmer,
LE - 3A per channel
L5112D10LP
12 Channel C-Bus®
Professional Dimmer,
LE - 10A per channel
44
C-Bus® Product Overview
Professional High Powered
Dimmers
6 Channel non RCD models
Professional High Powered
Dimmers
6 Channel non RCD models
L5106D20LP
6 Channel C-Bus®
Professional Dimmer,
LE - 20A per channel
L5106D3LP
6 Channel C-Bus®
Professional Dimmer,
LE - 3A per channel
L5106D10LP
6 Channel C-Bus®
Professional Dimmer,
LE - 10A per channel
L5106D5LP
6 Channel C-Bus®
Professional Dimmer,
LE - 5A per channel
45
C-Bus Output Units
®
Dimmer Units
Professional High Powered
Dimmers
3 Channel non RCD models
L5103D20LP
3 Channel C-Bus®
Professional Dimmer,
LE - 20A per channel
L5103D10LP
3 Channel C-Bus®
Professional Dimmer,
LE - 10A per channel
L5103D5LP
3 Channel C-Bus®
Professional Dimmer,
LE - 5A per channel
46
C-Bus® Product Overview
Professional High Powered
Dimmers
Professional High Powered
Dimmers
RCD models
• Modular design with individual dimmer channel cards
L5112DxxLPRx
12 Channel C-Bus®
Professional Dimmer,
LE Available in 3 Amp,
5 Amp, 10 Amp, 16
Amp and 20 Amp
models.
• Soft start load turn-on protects lamp filaments
• Voltage compensation to minimise load brightness
variation if the a.c. supply voltage drifts
• Filtering reduces supply voltage signalling effects
• Linear output load power following input control
• C-Bus® network burden and system clock generator
• After mains fail, dimmers return to previous or
preset values
• Local C-Bus® override switches on front panel
• Channel Status indicators on front control panel
• On-board MCB and RCD protection
• Mounting brackets included for ease of installation
• Generous load and mains supply terminals
• Emergency lighting output for each channel
• Manual dimmer bypass switch on all channels
• Fan-free operation, reduces maintenance requirements
L5106DxxLPRx
6 Channel C-Bus®
Professional Dimmer,
LE Available in 3 Amp,
5 Amp, 10 Amp and 20
Amp models.
• Suitable for single or three phase track lighting
applications with optional three phase MCBs and RCDs
• Complies with Australian (AS/NZS CISPR 15:2002) and
International standards for light dimmers.
L5103DxxLPRx
3 Channel C-Bus®
Professional Dimmer,
LE Available in 5 Amp,
10 Amp and 20 Amp
models.
47
C-Bus Output Units
®
Dimmer Units
Professional High Powered
Dimmers
12 Channel RCD models
Professional High Powered
Dimmers
12 Channel RCD models
L5112D20LPR12
12 Channel C-Bus®
Professional Dimmer,
LE - 20A per channel
(12 RCDs on board)
L5112D10LPR6
12 Channel C-Bus®
Professional Dimmer,
LE - 10A per channel
(6 RCDs on board)
L5112D16LPR12
12 Channel C-Bus®
Professional Dimmer,
LE - 16A per channel
(12 RCDs on board)
L5112D5LPR12
12 Channel C-Bus®
Professional Dimmer,
LE - 5A per channel (12
RCDs on board)
L5112D10LPR12
12 Channel C-Bus®
Professional Dimmer,
LE - 10A per channel
(12 RCDs on board)
L5112D5LPR6
12 Channel C-Bus®
Professional Dimmer,
LE - 5A per channel
(6 RCDs on board)
48
C-Bus® Product Overview
Professional High Powered
Dimmers
6 Channel RCD models
Professional High Powered
Dimmers
6 Channel RCD models
L5106D20LPR6
6 Channel C-Bus®
Professional Dimmer,
LE - 20A per channel
(6 RCDs on board)
L5106D5LPR6
6 Channel C-Bus®
Professional Dimmer,
LE - 5A per channel (6
RCDs on board)
L5106D10LPR6
6 Channel C-Bus®
Professional Dimmer,
LE - 10A per channel
(6 RCDs on board)
L5106D5LPR3
6 Channel C-Bus®
Professional Dimmer,
LE - 5A per channel (3
RCDs on board)
L5106D10LPR3
6 Channel C-Bus®
Professional Dimmer,
LE - 10A per channel
(3 RCDs on board)
49
C-Bus Output Units
®
Dimmer Units
Professional High Powered
Dimmers
3 Channel RCD models
L5103D20LPR1
3 Channel C-Bus®
Professional Dimmer,
LE - 20A per channel
(1 RCD on board)
L5103D10LPR1
3 Channel C-Bus®
Professional Dimmer,
LE - 10A per channel
(1 RCD on board)
L5103D5LPR1
3 Channel C-Bus®
Professional Dimmer,
LE - 5A per channel
(1 RCD on board)
50
C-Bus® Product Overview
High Power, Multi Channel
Dimmers
• Rugged, high quality dimmer unit specifically designed for
theatrical dimming applications
• Dimensions 533mm x 486mm x 163mm
• Leading edge dimmers suitable for incandescent and low
voltage lighting
L5112D10B2S
12 channel dimmer, 10A
per channel, 250V ac, MCCB
protection, 40 - 80Hz, APC
technology with socket outlets
• Feature opto-controlled electronic switching devices
• Chokes provide high rise time along with excellent high
frequency noise suppression and low acoustic noise
• Feature “Advanced Phase Control” (APC) switching
technique giving greater efficiency resulting in cooler
operation and ultimately improved reliability
• Front panel buttons, channel switches, LED indicators
and seven-segment display enable the user to monitor
and select the built-in functions
High Power, Multi Channel
Professional Series Dimmers
- accessories
• Control from either a DMX-512 source or from C-Bus®
• Units draw 22mA from a C-Bus® Network
• C-Bus® Learn Enabled.
5150SMB
Mounting bracket - shallow
5150DMB
Mounting bracket - deep
5150DMX
DMX connector kit
51
C-Bus Output Units
®
Dimmer Units
DIN Rail Mounted Universal
Dimmer Range
L5504D2U
4 channel C-Bus® universal dimmer 250V a.c, 2.5A per
channel, inbuilt 200mA C-Bus® power supply
L5504D2UP
4 Channel C-Bus® universal dimmer 250V a.c, 2.5A per
channel, no inbuilt C-Bus® power supply
• 4 channel universal dimmer, DIN rail mounted
• 4 channel universal dimmer, DIN rail mounted
• 12M DIN modules wide
• 12M DIN modules wide
• Dimensions 215mm x 85mm x 65mm
• Dimensions 215mm x 85mm x 65mm
• Features 4 channels of 2.5A rating
• Features 4 channels of 2.5A rating
• Suitable for use with leading edge or trailing edge
compatible low voltage transformers
• Suitable for use with leading edge or trailing edge
compatible low voltage transformers
• Suitable for low voltage electronic transformers,
incandescent lamps and low voltage lamps with
iron core transformers
• Suitable for low voltage electronic transformers,
incandescent lamps and low voltage lamps with
iron core transformers
• Features automatic load sensing
• Features automatic load sensing
• Features a software selectable network burden and
C-Bus® system clock
• Features a software selectable network burden and
C-Bus® system clock
• A maximum of 10 units may be connected to a
C-Bus® network
• A maximum of 100 units may be connected to a
C-Bus® network
• Features an inbuilt 200mA C-Bus® power supply
• Does not source current to the network
• C-Bus® Learn Enabled.
• Draws 18mA from C-Bus® when mains is not connected
• C-Bus® Learn Enabled.
52
C-Bus® Product Overview
DIN Rail Mounted
Dimmer Range
L5508D1A
8 channel dimmer 250V a.c, 1A per channel,
inbuilt 200mA C-Bus® power supply
L5504D2A
4 channel dimmer 250V a.c, 2A per channel,
inbuilt 200mA C-Bus® power supply
• 8 channel dimmer, DIN rail mounted
• 4 channel dimmer, DIN rail mounted
• 12M DIN Modules Wide
• 12M DIN modules wide
• Dimensions 215mm x 85mm x 65mm
• Dimensions 215mm x 85mm x 65mm
• Features 8 channels of 1A output, suitable for
incandescent and low voltage lighting
• Features 4 channels of 2A output, suitable for
incandescent and low voltage lighting
• Features a software selectable network burden and
C-Bus® system clock
• Features a software selectable network burden and
C-Bus® system clock
• A maximum of 10 units may be connected to any
C-Bus® network
• A maximum of 10 units may be connected to any
C-Bus® network
• Features an inbuilt 200mA C-Bus® power supply
• Features a 200mA C-Bus® power supply
• C-Bus® Learn Enabled.
• C-Bus® Learn Enabled.
L5508D1AP
8 channel dimmer 250V a.c, 1A per channel,
no inbuilt C-Bus® power supply
L5504D2AP
4 channel dimmer 250V a.c, 2A per channel,
no inbuilt C-Bus® power supply
• 8 channel dimmer, DIN rail mounted
• 4 channel dimmer, DIN rail mounted
• 12M DIN modules wide
• 12M DIN modules wide
• Dimensions 215mm x 85mm x 65mm
• Dimensions 215mm x 85mm x 65mm
• Features 8 channels of 1A output, suitable for
incandescent and low voltage lighting
• Features 4 channels of 2A output, suitable for incandescent and low voltage lighting
• Features a software selectable network burden and
C-Bus® system clock
• Features a software selectable network burden
and C-Bus® system clock
• A maximum of 100 units may be connected to any
C-Bus® network
• A maximum of 100 units may be connected to any
C-Bus® network
• Does not source current to the network
• Does not source current to the network
• Draws 18mA from the C-Bus® when mains is
not connected
• Draws 18mA from the C-Bus® when mains is
not connected
• C-Bus® Learn Enabled.
• C-Bus® Learn Enabled.
53
C-Bus Output Units
®
Dimmer Units
C-Bus DSI Gateway Range
0-10V Analogue Output Unit
L5508DSI
8 channel dimmer for DSI electronic ballasts 250V
a.c, inbuilt 200mA C-Bus® power supply
L5504AMP
4 channel analogue
output, 0-10V
• 8 channel dimmer for DSI ballasts, DIN rail mounted
• Analogue output module, DIN rail mounted
®
• 12M DIN modules wide
• 4M DIN modules wide
• Dimensions 215mm x 85mm x 65mm
• Provides C-Bus® control of electronic DSI digital ballasts
• Requires a 240V a.c. connection
• The module controls up to 100 DSI ballasts per channel
• Dimensions 72mm x 85mm x 65mm
• Up to 10 units may be connected to any C-Bus® network
• Used in conjunction with electronic DSI ballasts
• The Dimmer features a 200mA C-Bus power supply
®
• C-Bus® Learn Enabled.
• Can either source or sink current and is used to drive
most types of 0-10V electronic dimmable ballasts
• The unit provides 4 independent output channels
• Powered from C-Bus® and requires 18mA at 15 - 36Vdc
for correct operation
• The polarity of the signal may be selected so that 0V
corresponds to maximum or minimum brightness
• Units draw 18mA from the C-Bus® when mains is not
connected
L5508DSIP
8 channel dimmer for DSI electronic ballasts 250V
a.c, no inbuilt C-Bus® power supply
• 8 channel dimmer for DSI ballasts, DIN rail mounted
• 12M DIN modules wide
• Dimensions 215mm x 85mm x 65mm
• Provides C-Bus® control of electronic DSI digital ballasts
• The module controls up to 100 DSI ballasts per channel
• Up to 100 units may be connected to any
C-Bus® network
• Used in conjunction with electronic DSI ballasts
• Units draw 18mA from the C-Bus® network when mains is
not connected
• C-Bus® Learn Enabled.
54
C-Bus® Product Overview
• C-Bus® Learn Enabled.
C-Bus Output Units
®
Infra-red Output Units
Infra-red Output Units
• Transmits IR codes to third party devices
• Capable of broadcasting IR messages through two
IR output channels (consist of 3.5mm mini audio
mono sockets)
5034NIRT
2 channel infra-red transmitter
unit, 2000 Series wall plate
• Single or dual head emitter leads (ordered separately)
should be connected to the output jacks. Catalogue
numbers 8050LD and 8050LD/2
• Programmed via the High Speed Programing Cable
(catalogue number 5100HSCU, ordered separately, see
page 56)
• The installer has the facility to modify the stored codes
using Windows™ based application software
• Stores a library of commonly used IR codes
• The Infrared Controller is based on the standard range of
C-Bus® 4-button wall switches
C5034NIRT
2 channel infra-red transmitter
unit, Classic C2000 Series
wall plate
• The standard colour is White Electric
• Units draw 32mA from the C-Bus® network.
SC5034NIRT
2 channel infra-red transmitter
unit, Slimline SC2000 Series
wall plate
SL5034NIRT
2 channel infra-red transmitter
unit, Eclipse SL2000 Series
wall plate
55
C-Bus Output Units
®
Infra-red Output Units
Infra-red Output Units
- accessories
5100HSCU
High speed
programming
cable for C-Bus® 2
channel infra-red
transmitter unit.
5100RP
Infra-red code learning unit
Infra-red code learning unit, complete with Windows™
based software. Required for learning third party infra-red
codes not included in the code library shipped with the
infra-red transmitter unit software.
56
C-Bus® Product Overview
C-Bus Output Units
®
Relay Units
10A Relay Units
L5512RVF
12 channel relay 250V a.c, 10A inductive load per channel,
inbuilt 200mA C-Bus® power supply
L5512RVFP
12 channel relay 250V a.c, 10A inductive load per
channel, no inbuilt C-Bus® power supply
• 12 channel relay module, DIN rail mounted
• 12 channel relay module, DIN rail mounted
• 12M DIN modules wide
• 12M DIN modules wide
• Dimensions 215mm x 85mm x 65mm
• Dimensions 215mm x 85mm x 65mm
• Featuring 12 channels of voltage free relay switching
• Featuring 12 channels of voltage free relay switching
• Rated at 10A incandescent or 10A fluorescent load
per channel
• Rated at 10A incandescent or 10A fluorescent load
per channel
• Incorporates a software selectable network burden and
C-Bus® system clock
• Incorporates a software selectable network burden and
C-Bus® system clock
• A maximum of 10 units may be connected to any
C-Bus® network
• A maximum of 100 units may be connected to any
C-Bus® network
• Incorporates an inbuilt 200mA C-Bus® power supply
• These units draw 18mA from C-Bus® network when
mains is not connected
• C-Bus® Learn Enabled.
• C-Bus® Learn Enabled.
57
C-Bus Output Units
®
Relay Units
10A Relay Units
L5508RVF
8 channel relay 250V a.c, 10A inductive load per
channel, inbuilt 200mA C-Bus® power supply
L5508RVFP
8 channel relay 250V a.c, 10A inductive load per
channel, no inbuilt C-Bus® power supply
• 8 channel relay module, DIN rail mounted
• 8 channel relay module, DIN rail mounted
• 12M DIN modules wide
• 12M DIN modules wide
• Dimensions 215mm x 85mm x 65mm
• Dimensions 215mm x 85mm x 65mm
• Featuring 8 channels of voltage free relay switching
• Featuring 8 channels of voltage free relay switching
• Rated at 10A incandescent or 10A fluorescent load per
channel
• Rated at 10A incandescent or 10A fluorescent load per
channel
• Incorporates a software selectable network burden and
C-Bus® system clock
• Incorporates a software selectable network burden and
C-Bus® system clock
• A maximum of 10 units may be connected to any
C-Bus® network
• A maximum of 100 units may be connected to any
C-Bus® network
• Incorporates an inbuilt 200mA C-Bus® power supply
• These units draw 18mA from C-Bus® network when
mains is not connected
• C-Bus® Learn Enabled.
• C-Bus® Learn Enabled.
58
C-Bus® Product Overview
10A Relay Units
L5504RVF
4 channel relay 250V a.c, 10A inductive load per channel,
inbuilt 200mA C-Bus® power supply
L5504RVFP
4 channel relay 250V a.c, 10A inductive load per
channel, no inbuilt C-Bus® power supply
• 4 channel relay module, DIN rail mounted
• 4 channel relay module, DIN rail mounted
• 8M DIN modules wide
• 8M DIN modules wide
• Dimensions 144mm x 85mm x 65mm
• Dimensions 144mm x 85mm x 65mm
• Featuring 4 channels of voltage free relay switching
• Featuring 4 channels of voltage free relay switching
• Rated at 10A incandescent or 10A fluorescent load
per channel
• Rated at 10A incandescent or 10A fluorescent load
per channel
• Incorporates a software selectable network burden and
C-Bus® system clock
• Incorporates a software selectable network burden and
C-Bus® system clock
• A maximum of 10 units may be connected to any
C-Bus® network
• A maximum of 100 units may be connected to any
C-Bus® network
• Incorporates an inbuilt 200mA C-Bus® power supply
• These units draw 18mA from C-Bus® when mains is
not connected
• C-Bus® Learn Enabled.
• C-Bus® Learn Enabled.
59
C-Bus Output Units
®
Relay Units
Changeover Relay Units
Motorised Blinds/Curtains/
Shutter Relay Unit
L5504RVFCP
4 channel changeover relay, 250V a.c,
no inbuilt C-Bus® power supply,
learn enabled
L5501RBCP
C-Bus® Motorised
Blinds/Curtains/Shutter Relay,
250 V a.c, no C-Bus® Power Supply
• Single channel relay unit for the direct control of
motorised blinds, curtains or shutters via C-Bus®
L5504RVFC
4 channel changeover relay, 250V a.c, learn enabled,
inbuilt 200mA C-Bus® power supply, learn enabled
• DIN rail mounted, 2M wide
• Dimensions 36 x 93mm x 63mm
• Allows up/down and stop control
• 4 channel changeover relay modules with interlock
features, DIN rail mounted
• 8M DIN modules wide
• Dimensions 144mm x 85mm x 65mm
• Used for control of air conditioning systems (on/off, low,
medium and high) and shutter or blind control (up/down)
• A maximum of 80 units may be connected to a
C-Bus® network
• Powered from C-Bus®, draws 18mA
• C-Bus® Learn Enabled
• Optional remote mounting enclosure available, catalogue
number 5501RE.
• The unit can be simply wired to achieve electrical
interlocking, for use where outputs are all mutually exclusive
• Relays rated at 10A resistive, 5A incandescent/inductive,
1A fluorescent
• Incorporates a software selectable network burden and
C-Bus® system clock
• A maximum of 100 units may be connected to any
C-Bus® network
• These units draw 18mA from C-Bus® when mains is
not connected
• C-Bus® Learn Enabled.
60
C-Bus® Product Overview
5501RE
Remote mounting
enclosure
20A Relay Units
L5504RVF20
4 channel relay, 250V a.c, 20A inductive load per
channel, inbuilt 200mA C-Bus® power supply
L5504RVF20P
4 channel relay, 250V a.c, 20A inductive load per
channel, no inbuilt C-Bus® power supply
• 4 channel 20A relay module, DIN rail mounted
• 4 channel 20A relay module, DIN rail mounted
• 12M DIN modules wide
• 12M DIN modules wide
• Dimensions 215mm x 85mm x 65mm
• Dimensions 215mm x 85mm x 65mm
• 4 channels of voltage free relay switching
• 4 channels of voltage free relay switching
• Rated at 20A incandescent, 20A HID or 20A fluorescent
load per channel
• Rated at 20A incandescent, 20A HID or 20A fluorescent
load per channel
• Relays features magnetic latching
• Relays feature magnetic latching
• Built in mechanical level for manual changeover of
relay state
• Built in mechanical level for manual changeover of
relay state
• Incorporates a software selectable network burden and
C-Bus® system clock
• Incorporates a software selectable network burden and
C-Bus® system clock
• A maximum of 10 units may be connected to any
C-Bus® network
• A maximum of 100 units may be connected to any
C-Bus® network
• Incorporates an inbuilt 200mA C-Bus® power supply
• Units draw 18mA from the C-Bus® when mains is
not connected
• C-Bus® Learn Enabled.
• C-Bus® Learn Enabled.
61
C-Bus Output Units
®
Relay Units
Ceiling Sweep Fan Control
Relay Unit
• Single channel relay unit for the direct control of ceiling
sweep fans
• Capacitor control (utilise capacitor supplied with fan)
• In-built capacitor bay
• High temperature rated
• DIN rail mounted, 3M wide
• Dimensions 53 x 93mm x 65mm
• Up to 3-speed control of fan
• Powered from C-Bus®, draws 18mA
L5501RFCP
C-Bus® Ceiling Sweep Fan
Control Relay, 250 V a.c,
no C-Bus® Power Supply
• Optional remote mounting enclosure available, catalogue
number 5501FRE.
5501FRE
Remote mounting
enclosure
62
C-Bus® Product Overview
Standard Relay Units
5101R
1 channel relay
250V a.c. 10A
inductive load
5102RVF
2 channel voltage free
relay 250V a.c, 10A
inductive per channel
• Single C-Bus® relay unit
• 2 channel C-Bus® relay unit
• Dimensions 198mm x 42mm x 39mm
• Dimensions 198mm x 42mm x 39mm
• 1 channel of 240V a.c. switching
• Featuring 2 channels of 240V ac switching
• Suitable for incandescent, inductive and fluorescent
switching up to a maximum load of 10A
• Suitable for incandescent, inductive and fluorescent
switching up to a maximum load of 10A per channel
• A maximum of 100 units may be connected to any
C-Bus® network
• A maximum of 100 units may be connected to any
C-Bus® network
• These relays do not draw any current from C-Bus®
network when mains power is connected.
• These relays do not draw any current from C-Bus®
network when mains power is connected.
5101RC
1 channel relay 250V
a.c. 10A inductive load,
with cord set
• Single C-Bus® relay unit
• Dimensions 198mm x 42mm x 39mm
• Featuring 1 channel of 240V a.c. switching
• Units are pre-wired with terminated C-Bus® cable and
terminated double insulated mains cable
• Suitable for incandescent, inductive and fluorescent
switching up to a maximum load of 10A
• A maximum of 100 units may be connected to any
C-Bus® network
• These relays do not draw any current from C-Bus®
network when mains power is connected.
63
C-Bus Output Units
®
Relay Units
Extra Low Voltage Relay Unit
• 8 x single pole, double throw (change-over) relays
• Powered from C-Bus®, draws 32mA
• Contacts rated 2A (AC3) @ 30V a.c./d.c.
• Relays can operate in pairs
• Local override
• Temperature rated to 50°C
• IP5x rated enclosure
• Removable terminals.
64
C-Bus® Product Overview
L5108RELVP
8 channel safe extra low
voltage relay 30V a.c./d.c.
2A per channel
C-Bus System Units
®
and Accessories
Wiser Home Controller
• Router platform giving connectivity to C-Bus® from local
network and internet
• 4 LAN ports (one reserved for C-Bus® Network Interface)
5200PG
Wiser Home
Controller
• Wireless G/B/N access point
• Web server providing control from any PC web tablet
(web browser supporting flash required) or Windows™
Vista Media Center
• Common user interface across all control devices
• Scene and scheduling capabilities on board
• Full Logic Engine capabilities on board which can control
devices such as lighting, Multi-room Audio, HVAC, blinds
and irrigation
• Allows installers remote access to re-program Wiser & C-Bus®
from outside the home/building
• Future integration with many IP based devices
• Integration to Windows™ Vista Media Center
• Display RSS news feeds
• Monitor email account
• Product includes busbar for ease of installation (bridges
ethernet and power)
• Multiple installation options; flat or upright on desktop and also
wall or enclosure mounting (using keyhole points)
• Package includes Wiser Controller, in-line C-Bus® Network
Interface, busbar, power supply, joiner and stand
• Product contains USB flash drive with manuals, help file, etc.
65
C-Bus System Units
®
and Accessories
Pascal Automation Controller
• Provides extended conditional
and real-time event programming for C-Bus®
• Programs downloaded to the unit from a PC
• Connects directly to C-Bus®
• Powered from C-Bus®
• 4M DIN modules wide
• 2 x RS-232 ports for third party device control
• A scheduling tool allows time based events to be
programmed into the unit
• A scene programming tool allows installers to quickly and
easily program scenes into the unit
• A programming wizard provides a GUI based method for
creating basic logic programs.
• More complex programs are produced by advanced users
utilising the freeform text programming method
• Programming language based on the standard Pascal
computer language, enhanced by Clipsal with specific
commands related to C-Bus® control.
• The language supports commands such as:
o Conditional logic (if then, and, or, not etc)
o Flow Control (for, repeat, while)
o Variables (integer, real, Boolean, character, string)
o Control and monitor C-Bus® group addresses
o Control and monitor C-Bus® scenes
o C-Bus® tag names
o Serial (RS-232) input/output.
66
C-Bus® Product Overview
5500PACA
C-Bus® Pascal
Automation Controller
C-Bus BACnet Gateway
C-Bus DALI Gateway
5000BACNET
C-Bus® BACnet
Gateway
5502DAL
C-Bus® DALI Gateway
• C-Bus® BACnet Gateway is a
hardware interface
• C-Bus® to DALI Gateway,
DIN rail mounted
®
• Allows exchange of information
between C-Bus® and a Building
Management System supporting
the BACnet protocol
• One full C-Bus® lighting application supported
• BACnet values supported: analogue read, analogue write
and binary read
• Supplied pre-configured
• Supplied with an enclosure, C-Bus® PC Interface and
BACnet module power supply
®
• 4M DIN modules wide
• Dimensions 72mm x 85mm x 65mm
• Supports DALI lamp and ballast failure information to be
available on the C-Bus® network
• Capable of controlling up to two DALI networks
• The unit supports DALI group addresses, short addresses
and scenes the DALI global (broadcast) address
• A remote switch input is included to turn all DALI output
channels to the ON or OFF states, irrespective of the
current state of the C-Bus®, including no C-Bus®
• Incorporates the C-Bus® clock signal and a network burden
• Up to 50 DALI Gateways can be connected to a single
C-Bus network
• Units Draw 32mA from a C-Bus® network
C-Bus DMX Gateway
®
5502DAL2PS
C-Bus® DALI Gateway plus
two DALI power supplies
5500DMX
C-Bus® DMX
Gateway
• C-Bus® to DMX-512-A Gateway
• Map 12 C-Bus® group addresses
and levels to multiple combinations
of DMX slot addresses
• Powered from
C-Bus®,
draws 50mA
• DIN rail mounted, 4M wide
• Supplied with 300mm DMX cable.
• C-Bus to DALI Gateway,
DIN rail mounted
• 4M DIN modules wide
• Dimensions 72mm x 85mm x 65mm
• Supports DALI lamp and ballast failure information to be
available on the C-Bus® network
• Capable of controlling up to two DALI networks
• The unit supports DALI group addresses, short addresses
and scenes the DALI global (broadcast) address
• A remote switch input is included to turn all DALI output
channels to the ON or OFF states, irrespective of the
current state of the C-Bus, including no C-Bus®
• Incorporates the C-Bus® clock signal and a network burden
• Up to 50 DALI Gateways can be connected to a single
C-Bus network
• Units Draw 32mA from a C-Bus® network
• Supplied with two DIN DALI power supply modules
67
C-Bus System Units
®
and Accessories
C-Bus PC Interface
C-Bus Power Supply
5500PC
C-Bus® PC interface
5500PS
C-Bus® power supply,
350mA
• C-Bus® PC interface, DIN rail mounted
• C-Bus® power supply, DIN rail mounted
• 4M DIN modules wide
• 4M DIN modules wide
• Dimensions 72mm x 85mm x 65mm
• Dimensions 72mm x 85mm x 65mm
• Features two connections to C-Bus® (2 x RJ45 sockets)
• Supplies 350mA at 18-36V d.c. to the C-Bus® network
• Features three connections to RS232 (2 x RJ45 and1 x
DB9 sockets)
• Each power supply supports approximately 18 standard
C-Bus units
• Units Draw 32mA from a C-Bus® network
• Up to 5 power supplies may be used on any single
C-Bus® network
®
®
C-Bus Network Bridge
®
5500PCU
C-Bus® USB PC interface
5500NB
C-Bus® Network bridge
• C-Bus® PC interface,
DIN rail mounted
• 4M DIN modules wide
• C-Bus® network bridge, DIN rail mounted
• Dimensions 72mm x 85mm x 65mm
• Based on a 4M DIN module
• Features two connections to C-Bus® (2 x RJ45 sockets)
• Dimensions 72mm x 85mm x 65mm
• Features one connection to USB (1 x type B socket)
• Provides a two-way C-Bus® to C-Bus® network interface
• Units Draw 32mA from a C-Bus® network
• Units draw 18mA from a C-Bus® network
68
C-Bus® Product Overview
C-Bus Ethernet Network
Interface
C-Bus Network
Analyser
5500CN
C-Bus® Ethernet
network interface
5100NA
C-Bus® network
analyser
• C-Bus® Ethernet network interface, DIN rail mounted
• The Network Analyser is a tool used to measure various
C-Bus® system parameters:
®
• 4M DIN modules wide
• Dimensions 72mm x 85mm x 65mm
• Provides a two-way C-Bus® to Ethernet network interface
• Allows C-Bus® commands to be distributed via a 10 Base-T
Ethernet (TCP/IP) network
®
- Power Available
- Clock Signal Present
- Excess Voltage
- Add/Remove Burden
- Excess Cable Indication
• Dimensions 60.5mm x 120mm x 30.3mm
• Features 2 x C-Bus® RJ45 connections and 1 x Ethernet
RJ45 connection
• Measures capacitance, burden, clock signal and network
voltage
• The unit requires an external 9-12V d.c. power pack
supplied.
• The network analyser is powered from C-Bus® and is
supplied with a pair of leads.
C-Bus Network Monitor
®
5100CN2
C-Bus® inline Ethernet
network interface
5500NMA
C-Bus® network monitor
• C-Bus® network monitor,
DIN rail mounted
• C-Bus® Ethernet network interface, inline
• Based on a 4M DIN module
• Provides a two-way C-Bus to Ethernet network interface
• Dimensions 72mm x 85mm x 65mm
• Allows C-Bus commands to be distributed via a 10
Base-T Ethernet (TCP/IP) network
• Activates C-Bus® Remote ON override in the event of a
C-Bus® network failure
• Features 1 x C-Bus® terminal block and 1 x Ethernet
RJ45 connection
• Passive device, does not transmit any data onto the
network
• Supplied complete with 12V d.c. power supply
• Units draw 18mA from a C-Bus® network.
®
®
69
C-Bus System Units
®
and Accessories
C-Bus Cable
C-Bus Barcode Reader
5005C305B
C-Bus® Category 5, 4 pair,
UTP cable, 305 metres,
solid conductors
5100BCS
C-Bus® Bar code reader,
USB connection, for use with
C-Bus® Toolkit software
®
®
5005C305BST
C-Bus® Category 5, 4 pair,
UTP cable, 305 metres,
stranded conductors
• 4 pair, Category 5, unshielded cable with a unique outer
colour sheath specifically designed for the C-Bus® system
• A maximum of 1000 metres of cable is permitted on any
one C-Bus® network
• Two pairs are used for the C-Bus® connection C-Bus®
positive (blue + orange) and C-Bus® negative (blue/white
+ orange/white)
• The C-Bus® cable must be segregated from the mains
cable in C-Bus® installations
• Hand-held USB barcode reader
• Used in conjunction with C-Bus Toolkit software
• Provides a convenient and time saving method of
inputting information about C-Bus units, as they are
added to an installation
• Unit is configured to wake up when trigger button is
depressed
• LED indicator and audible alert provide confirmation of a
barcode read
• C-Bus® cable has a mains rated outer sheath and
Standard Cat 5 cable does not have this rating
• Suitable for use inside electrical enclosures
• Available in both solid and stranded conductor variants
Cat. 5e Shuttered Socket
C-Bus Network Burden
30RJ45SMA5SH,PK
Pink modular Cat. 5e RJ45
shuttered socket
5500BUR
C-Bus® network burden
®
• C-Bus® network RJ45 hardware burden
• Supplied in pack of 10
• Pink modular cat. 5e RJ45 shuttered socket
• Suits C-Bus® installations
70
C-Bus® Product Overview
Notes
71
C-Bus Software
®
C-Bus Toolkit Software
HomeGate Software
C-Bus® Toolkit software is a PC-accessible C-Bus® network
configuration and customer solution programming utility. It
allows the installer to:
The HomeGate application software provides a powerful
but simple to use interface to C-Bus® via a standard PC.
HomeGate provides scheduling, manual control and
monitoring of a domestic C-Bus® system from a PC running
Windows 98, 2000, NT, ME or XP. HomeGate comprises of
a project editor, real time monitoring and control, a real time
scheduler, security and access control and internet access.
It also includes help and support documentation.
®
• Connect directly to an installer C-Bus® network via a
C-Bus® PC interface unit to synchronise logical and
physical C-Bus® customer site data
• Configure the C-Bus® network to define the C-Bus®
architecture of the customer site and ensure C-Bus® units
can communicate with each other
A HomeGate USB dongle must be purchased to take the
software from an evaluation version to a full working version.
• Program and commission
the customer solution
• Save, backup and restore
sites. C-Bus® Toolkit has
a database for creating
and storing customer site
programming as projects.
C-Bus Software Installer
Dongle
®
The C-Bus® Software Installer Dongle is a valuable installer
tool for creating/commissioning projects using C-Bus®
Version 4 Schedule Plus & HomeGate software and also
C-Bus® Version 1 OPC Server. The dongle is time restricted
and allows the software to operate in ‘normal’ mode for
anywhere between 48 to 72 hours per use (the software
then returns to evaluation/demo mode). The installer dongle
is compatible with future software releases.
5000SDINST/1
Installer dongle for C-Bus®
software, unlimited networks.
72
C-Bus® Product Overview
5000SDHG2/4
2 network licence dongle
for HomeGate V4
5000SDHG10/4
10 network licence dongle
for HomeGate V4
Schedule Plus Software
C-Bus OPC Server Software
Schedule Plus application software provides a powerful and
easy use interface to C-Bus® via a standard PC. Schedule
Plus has been developed specifically for commercial and
industrial applications.
It provides scheduling,
manual control and
monitoring of a C-Bus®
system from a PC running
Windows 98, 2000, NT,
ME or XP. A Schedule
Plus USB dongle must
be purchased to take the
software from an evaluation
version to a full working
version.
The C-Bus® OPC Server provides an interface between
third party software (OPC Clients) and a C-Bus® System.
The C-Bus® OPC Server acts as a gateway for transmitting
C-Bus® lighting type application information between third
party Building Management Systems (such as Honeywell,
Johnson, TAC, etc.) or Process Control Presentation
(SCADA) Systems and a Clipsal C-Bus® System.
5000SDSP2/4
2 network licence dongle for
Schedule Plus V4
®
A C-Bus® OPC Server USB dongle must be purchased to
take the software from an evaluation version to a full working
version.
Alternatively, the C-Bus® OPC Server is able to recognise
licenses manufactured by CITECT (currently only product
versions based on the
CITECT SCADA Version
7 platform and later are
supported).
5000SDOPC2/1
2 network licence dongle for
C-Bus® OPC Server V1
5000SDSP10/4
10 network licence dongle for
Schedule Plus V4
5000SDOPC10/1
10 network License Dongle for
C-Bus® OPC Server V1
5000SDSPU/4
Unlimited network licence dongle
for Schedule Plus V4
5000SDOPCU/1
Unlimited network license for
C-Bus® OPC Server V1
73
C-Bus Software
®
Piced Software
Marpa Software
Programming Interface for C-Bus® embedded devices
Multi Room Audio Rapid Programming Application
Piced is used to configure the following devices to meet
the user’s requirements:
Marpa software is used to configure the C-Bus® Multi
Room Audio Matrix Switcher unit and is freely available
from the Clipsal Integrated Systems web site. It requires
the use of USB port on the PC to connect to the Matrix
Switcher. Marpa software requires that the C-Bus® Toolkit
is installed.
•
•
•
•
C-Touch black and white MkII touchscreen
Colour C-Touch touchscreen
Pascal Automation Controller (PAC)
Wiser Home Controller
The Piced software features include:
•
•
•
•
•
•
Display of many components on many pages
Scenes for the control of many loads together
Schedules for the automatic control of loads
Access control to provide security
Irrigation control
Widget Manager for Wiser project creation
Piced is freely downloadable from the Clipsal Integrated
Systems web site.
74
C-Bus® Product Overview
Marpa is freely downloadable from the Clipsal
Integrated Systems web site.
Tica Software
Circa Software
Telephone Interface Commissioning Application
C-Bus® Infrared Commissioning Software
Tica software is used to configure the C-Bus® Telephone
Interface (CBTI). It requires the use of a RS232 serial
port on the PC to connect to the CBTI. Tica software
requires that C-Bus Toolkit is installed.
Circa software is used to commission C-Bus® Infrared
Devices (5034NIRT). The software allows the user to
select IR codes and assign them to particular output
channels on an Infrared Device and make associations
between IR codes and C-Bus® events. This is achieved
by using the USB programming cable (5100HSCU). The
user can import IR device files created by the 5100RP
Infrared Reader device. Circa software requires that C-Bus®
Installation Software V2 is installed.
Tica software is freely downloadable from the Clipsal
Integrated Systems web site.
Circa software is freely downloadable from the Clipsal
Integrated Systems web site.
75
Multi-Room Audio System
System Overview
The system has been designed utilising new digital audio
distribution technology (developed by Clipsal), in conjunction
with Clipsal C-Bus® core technology for system communication
and integration.
Clipsal’s digital audio distribution technology allows for noise
and interference free audio reproduction, whilst the C-Bus®
technology allows the audio products to be seamlessly integrated
and used with all existing C-Bus® products. For example, volume
can be controlled from the same C-Bus® switch or touch screen
controlling lighting.
In addition, the system allows any input audio source to be made
available in any audio zone. Changes to the input audio source
can easily be made by the user from a local C-Bus® device at
any time, regardless of where the audio source equipment (e.g.,
CD Player) is physically located. It is compatible with most audio
sources and it accommodates standard stereo line level analogue
inputs as well as digital audio TOS link inputs.
Infrared signals from hand held remote controls can be routed
through the system by connecting IR targets and emitters. IR
commands can also be stored by the system and activated by
programmed C-Bus® commands.
76
C-Bus® Product Overview
The C-Bus® Multi-Room Audio System allows a number of
different system layout options. This flexibility allows for a
wide range of customer needs and installation requirements.
Two example schematics are shown opposite.
Option A
This basic option allows a single audio source to be
available to a number of C-Bus® Audio Amplifiers and to
be controlled from convenient locations around the home
(via any combination of C-Bus® input devices). This option
requires one Cat-5 cable for the audio distribution. This cable
is cascaded between each Audio Amplifier.
Option B
This option allows more flexibility. Multiple audio sources are
made available to all audio zones, with all the audio sources
selectable on a zone-by-zone basis via C-Bus® Input Devices.
This option requires a separate (star wired) Cat-5 audio cable
to each Audio Amplifier in a zone.
Cable Guide
The C-Bus® Multi-Room Audio System allows users to listen to
and control audio sources from convenient locations around the
home. The system is both simple to install and easy to use.
Gold
Pink
Red/Black
Green
Standard
Speaker Cable
C-Bus
Cat 5 Cable
Line Level Stereo
Audio Cable
Cat 5 cable for
digital audio
Digital Audio Cascaded between Amplifiers
Power Pack
Remote C-Bus
Amplifier
Remote C-Bus
Amplifier
Remote C-Bus
Amplifier
Remote C-Bus
Amplifier
Option A
Audio Zone – Family Room
Audio Zone – Rear Patio
Audio Zone – Ensuite
Audio Zone – Bathroom
C-Bus Network
C-Bus Power Supply
and other C-Bus Devices
Digital Audio to Amplifiers
Audio Control via C-Bus
Input Units
eg: Wall Switches,
Touch Screens, Remotes
Audio Distributor
Line Level Stereo Audio
Source Output
Audio Source Equipment
(CD Player, MP3 Player, etc)
Audio to Speakers
Audio Zone – Rear Patio
Audio Zone – Family Room
Audio Zone – Ensuite
Audio Zone – Bathroom
4 x Remote C-Bus Amplifiers
Audio Control via C-Bus
Input Units
eg: Wall Switches,
Touch Screens, Remotes
C-Bus Network
Audio Zone – Bedroom
Digital Audio from Matrix Switcher
PC (Streaming Audio)
8 x Digital Audio
Outputs
CD Player
Pay TV
C-Bus Matrix Switcher
Desktop Mounted
C-Bus Amplifier
Media Player (PC)
DVD Player
Antenna
for AM/FM
reception
Option B
77
Multi-Room Audio System
Units and Accessories
Audio Matrix Switcher
Audio Distribution Unit
560884/2E
Deluxe Audio Matrix Switcher,
C-Bus® enabled, four stereo audio
input sources, streaming audio
and 8 digital audio output sources.
560011
Audio Distribution Unit,
one stereo audio input
source and one digital
output source
560884/2
Standard Audio Matrix Switcher,
C-Bus® enabled, four stereo audio
input sources and 8 digital audio
output sources.
• Digital audio distribution technology, for noise free
audio reproduction
• Stream digital audio from a host PC running C-Bus® Ripple
Software (deluxe model only)
• Four stereo analogue audio source inputs
• On-board dual AM/FM tuners
• Distributes a single stereo audio source to C-Bus® Audio
Amplifiers via a digitised signal over Cat-5 cable.
• Does not require any C-Bus® programming
• One stereo analogue audio source input
• One digital audio output (cascadable to multiple zones)
• Output can be looped between C-Bus® Audio Amplifiers
• Dimensions: 165mm x 50mm x 40mm.
• Audio sources switched via any C-Bus® input device or via the
control panel on the front of the Matrix switcher
• Eight digital audio zone outputs (~45m for each star
wired output)
• Supports audio scenes (8 scenes containing 8 zones)
• Cat-5 cable connection between Matrix switcher
and amplifiers
• Two mono annunciation inputs
• Voice annunciation of channel changes (selectable)
• One fibre-optic SPDIF input (digital audio compatible)
• One custom digital input to allow cascading of units or for
connecting an Audio Distribution Unit giving 1 additional
stereo analogue input
• C-Bus® infrared output (2 zones) for third party equipment
control
• Reticulated IR support
• User interface consisting of LCD display and tactile
feedback switches
• C-Bus® messages control selection of input/output routing
• Contains a C-Bus® PC interface
• C-Bus® supply voltage: 15-36Vd.c. @ 22mA (does not provide
power for C-Bus® network)
• Configuration set up through USB
• Control via C-Bus® input devices, such as C-Bus® wall
switches, touch screens, etc
• Field upgradable via USB port
• Dimensions: 436mm x 288mm x 80mm
• Designed to be installed in locations where audio/visual
equipment is installed ie. A/V cabinet or rack.
78
C-Bus® Product Overview
5600P24/500AU
External power supply for
audio distribution unit, switch
mode, 24V d.c, 500mA (only
required if 560011 used to
provide an additional digital
input for Matrix Switcher)
Audio Amplifiers
560125D/2 & 560125R/2
25 Watt/channel (RMS)
stereo audio amplifier,
C-Bus® enabled,
desktop-mount and
remote-mount version
560110R
10 Watt/channel (RMS)
stereo audio amplifier, C-Bus®
enabled, remote-mount version
• Used in conjunction with the C-Bus® Audio Matrix Switcher
or the Audio Distribution Unit
5600P24/3750AU
External power supply
for 25 Watt/channel
audio amplifier, switch
mode, 24V d.c, 3.75A
5600P24H3750A
External power supply for audio
amplifier, switch mode, 24V d.c.
72W continuous output power,
ambient temperature rating of
60°C (140°F) @ 3A output
• Controllable via C-Bus® input devices, such as C-Bus®
wall switches, touch screens and Wiser Home Controller
• Volume, bass, treble, balance controlled by C-Bus®
input devices
• Quiet digital audio design
• Stereo 25W RMS per channel – Remote and desktop
mounted units (when power supply fitted) or stereo 10W RMS
per channel – Remote mounted unit
• Can be cascaded off one Digital Audio Cat 5 input
• Repeater function - digital audio pass through capability
(default on)
560125MB
Mounting bracket to suit 25 W/channel
remote amplifier
560100E
Blank filling enclosure where
480mm width is required, suits
10W/channel remote amplifier
• Pre-amp output stage for connecting to a 3rd party
power amplifier (25W RMS per channel amplifiers only)
• Desktop Amplifier includes power on/off, mute, volume and
source select buttons and an infrared target for remote
control. Also includes 3.5mm stereo head phone jack
5600P24/1250AU
Power supply to suit 10W/
channel remote amplifier
• Desktop Amplifier supports Dynamic Control via long presses
of source select buttons on front panel
• Four 10W per channel amplifiers can be joined together for
installation on a 19” equipment rack tray
• Signal source either:
o Distributed digital
o Locally connected line-level analogue
o Fibre-optic (TOSlink) SPDIF (16bit, 48kHz)
• IR Target connection for reticulated IR support
560110MB
Mounting bracket to suit 10W/
channel remote amplifier
• High efficiency, ~70% at full power
• Dimensions (desktop 25W RMS per channel): 181mm x
216mm x 75mm
• Dimensions (remote 25W RMS per channel): 175mm x
212mm x 71mm
• Dimensions (remote 10W RMS per channel): 120mm x
158mm x 40mm
• C-Bus® supply voltage: 15 - 36Vd.c. @ 22mA.
79
Multi-Room Audio System
Units and Accessories
Premium Audio Speakers
In-ceiling Speakers
• Concealed high quality audio reproduction perfect for home
theatre, multi-room audio and outdoor audio applications
• Flush mount design ensures only the front face of the speaker
is visible and is flush with the ceiling
• In-ceiling speakers come complete with black boxes to
maximise and control bass response whilst keeping out dust
• Outdoor speakers are waterproof containing aluminium grilles
and mounting brackets plus marine grade stainless
steel hardware.
In-ceiling Speakers
5600K01-WE
Krix Holographix Speakers
(pair), circular, in-ceiling,
3-inch full range
• Supplied as a pair
• Sensitivity: 87dB
• Frequency Response: 90Hz – 20kHz
• Power Handling: Max. 40W RMS amplifier power
• Impedance: 8 ohms
• Dimensions: 95mm diameter x 108mm deep
(83mm diameter cut-out)
• Colour: white.
5600K02-WE
Krix Hemispherix Speaker
(single), circular, in-ceiling,
4-inch 2-way
• Supplied single
• Sensitivity: 86dB
• Frequency response: 65Hz – 20KHz
• Power Handling: Max. 60W RMS amplifier power
• Impedance: 6 ohms
• Dimensions: 240mm diameter x 140mm deep
(205mm diameter cut-out)
• Colour: white.
80
C-Bus® Product Overview
Outdoor Speakers
5600K03-WE
Krix Atmospherix Speaker
(single), circular, in-ceiling,
5-inch 2-way
5600K06-WE, 5600K06-BK
Krix Aquatix Speakers
(pair), outdoor, marine grade
waterproof, 5-inch 2-way
• Supplied single
• Supplied as a pair
• Sensitivity: 90dB
• Sensitivity: 87dB
• Frequency response: 45Hz – 20KHz
• Frequency Response: 70Hz – 20kHz
• Power Handling: Max. 100W RMS amplifier power
• Power Handling: Max. 80W RMS amplifier power
• Impedance: 6 ohms
• Impedance: 8 ohms
• Dimensions: 280mm diameter x 190mm deep
(247mm diameter cut-out)
• Colour: white and black.
• Colour: white.
5600K07-WE, 5600K07-BK
Krix Tropix Speakers (pair),
outdoor, marine grade
waterproof, 6.5-inch 2-way
• Supplied as a pair
• Sensitivity: 87dB
• Frequency Response: 55Hz – 20kHz
• Power Handling: Max. 100W RMS amplifier power
• Impedance: 8 ohms
• Colour: white and black.
81
Multi-Room Audio System
Units and Accessories
Multi-Room Audio
- Accessories
8050LD
IR Emitter Lead, single
8050ST
IR Shelf Target, with
1.8m cable
8050/2LD
IR Emitter Lead, dual
8050TT
IR Tube Target, with 1.8m cable
8050FT
IR Flat Target, with 1.8m cable
82
C-Bus® Product Overview
C-Bus Enabled
®
Security Panel
C-Bus Enabled Security Panel
®
• On-board, direct connection to C-Bus® (no C-bus PC
Interface required)
• Supports the C-Bus® Security Application command set
5400/16CB
Alarm Panel, 16 Zones,
C-Bus Enabled
• Alarm events such as Armed, Disarmed and Alarm can
be used to initiate C-Bus® commands, e.g turn C-Bus®
controlled lighting on or off
• Ability to map up to 16 alarm events to 16 C-Bus®
commands
• Ability to arm the security from C-Bus® input device (e.g,
touch screen or wall switch)
• Provided complete with a wall mounted security keypad
and rechargeable system backup battery
• Built in telephone dialer
• Access control features with provision for up to three
Wiegand card readers (Wiegand interface, readers and
cards purchased separately)
• 16 fully programmable security zones
• 16 physical security zone inputs with zone split option
• Two additional 24 hour inputs
• Plug-in RF interface to support a range of Wireless
detectors
• 4 programmable auxiliary outputs
• 56 user codes which can be assigned 3 to 6 digit PIN
codes
• Two button arming feature
• Programmable two area partitioning with overlapping of
zones in areas allowed
• Single or double trigger option on a zone-by-zone basis
• Supports up to 55 radio keys
• Secure DTMF remote arm / disarm capabilities
• Wide range of security and access control accessories are
available, including
o Expansion modules
o RF Expansion modules
o Sirens and Strobes
o Motion detectors
o RF motion detectors
o Reed switches
o Keypads
83
C-Bus Wireless System
®
(For Australia and New Zealand)
The C-Bus® Wireless product range incorporates a family of
C-Bus® Radio Frequency (RF) devices, including Wall Plates,
Plug Adaptors, Remote Control and a Gateway to Cat-5 wired
C-Bus® units.
C-Bus® Wireless Wall Switches are designed to easily replace
standard, 240V wall switches. They incorporate patented
Clipsal technology and are two wire devices requiring no neutral
(240V a.c. active and load connections only).
All C-Bus® Wireless units incorporate Clipsal C-Bus®’ unique
Learn Mode functions for programming devices. Wall switches,
Plug Adaptors and the Gateway Unit can also be programmed
via the C-Bus® Toolkit software. Multiple C-Bus® Wireless units
can be linked into a common network using Learn Mode or the
C-Bus® Toolkit software.
Associations can be created between buttons on multiple units, so
that a button pressed on one unit will operate a button on another
(and the connected lights or other electrical devices).
Programming a C-Bus® Wireless Unit via C-Bus® Toolkit software
C-Bus® Wireless units include scene capabilities, which allow
the user to perform a series of actions across multiple outputs by
pressing a single button. For example, on arrival home a home
owner could use a scene to switch on lights in the hallway, kitchen
and lounge, and also switch on a heater.
The diagrams below show two of the many possible basic
C-Bus® Wireless unit installations. Room A uses stand-alone
units, which can be switched via the Wireless Remote Control.
Room B uses networked units where buttons on one unit can
operate other units or trigger scenes.
Grouping C-Bus
Wireless Units
via Learn Mode
Room A Stand Alone C-Bus®
Wireless Units
Room B Networked C-Bus® Wireless Units
84
C-Bus® Product Overview
Basic Operation
Buttons on a Wireless Wall Switch or Plug Adaptor are organised
in pairs that control the output channels (local control buttons).
Remaining pairs (free buttons) are used to control outputs on
other units when multiple C-Bus® Wireless units are configured
as part of a network. For example, the figure to the right shows
a 6 button, 2 channel Saturn™ Wireless Dimmer Wall Switch.
Its buttons perform the following functions:
Buttons 1 and 2 control the first channel. (A quick press
on either button toggles the channel on or off. A long
press on button 1 or 2 dims down or up respectively).
Buttons 3 and 4 control the second channel.
Buttons 5 and 6 are unused when the unit is used as a
stand-alone unit. They may be used to control outputs on
other units when part of a multi-unit network.
3
4
When a C-Bus® Wireless Wall Switch or Plug Adaptor unit
is first installed, it functions as a stand-alone unit. In this
basic default mode, the unit functions as a dimmer or switch,
depending on the model.
C-Bus® Wireless Plug Adaptors have one output channel
(a single, 240V a.c. socket) and two buttons. Wall Switch
units are available in one or two output channel versions, with
two, four, six or eight buttons (eight button, Neo® only). Each
channel controls one or more lights or other electrical devices
connected to its output.
85
C-Bus Wireless System
®
(For Australia and New Zealand)
C-Bus® Wireless Networks
To experience the full capabilities of wireless operation, C-Bus®
Wireless units must be linked together to form a network.
To communicate with each other, units within the same
network should be located within 15 to 20 metres of each other.
This distance depends on building materials used.
Up to 30 units may be connected within the same C-Bus®
Wireless network.
Mode 1
Stand-Alone Mode
In this mode, C-Bus® Wireless Wall Switches and Plug
Adaptors acts as stand-alone dimmers or switches and make
no use of the inbuilt wireless capabilities. No setup is required
for this mode, Plug Adaptors simply plug into the mains, and
Wireless Wall Switches are installed by a licensed electrician in
place of existing wall switches. The buttons on the units control
the local dimming or switching channels of the unit only.
Mode 2
Simple Remote Controlled Mode
In this mode, a C-Bus® Wireless Wall Switches acts as a
stand-alone dimmer or switch and a C-Bus® Wireless Remote
Control operates the Wall Switch from a distance. This mode
is simple to set up and is suitable for small installations where
networking is not needed. C-Bus® Wireless Wall Switch or Plug
Adaptor units are controlled using a C-Bus® Wireless Remote:
In this mode, the buttons on the Wireless Wall Plate control
the local dimming or switching channels of the unit, and the
Remote Control is linked to buttons on a Wall Switch using a
Learn Mode operation. No PC is required.
C-Bus® Wireless Network Security
C-Bus® Wireless units can optionally use 128 bit-encrypted
messages to communicate with each other. This results in a
highly secure network.
Nearby C-Bus® Wireless Networks
It is possible to have several separate networks present
alongside each other without interfering, as each separate
C-Bus® Wireless network has an automatically assigned, unique
‘House Code’.
C-Bus® Wireless Modes of Operation
C-Bus® Wireless units have five major modes of operation.
86
C-Bus® Product Overview
Mode 3
Networked Mode
In this mode, a C-Bus® Wireless Wall Switch acts as a
dimmer or switch and multiple C-Bus® Wireless units can be
linked to each other with the C-Bus® Wireless technology.
This mode is simple to setup, and is suitable for more
complex installations. In this mode, local control buttons
control the dimming or switch channel of the unit, and may
also control other C-Bus® Wireless units. Free buttons can
control the dimmer or switch channels of other units via a
C-Bus® Wireless network established using Learn Mode
operations. The operation of buttons is set using Learn Mode
operations or using the C-Bus® Toolkit software.
Mode 4
Networked with Remote
In this mode, a C-Bus® Wireless Wall Switch acts as a dimmer
or switch and multiple C-Bus® Wireless units can be linked to
each other with the C-Bus® Wireless technology. Local control
buttons control the dimming or switch channel of the unit, and
may also control other C-Bus® Wireless units. Free buttons
can control the dimmer or switch channels of other units via
a C-Bus® Wireless network established using Learn Mode
operations or C-Bus® Toolkit software. Buttons on the Wireless
Remote are linked to Wall Switch and Plug Adaptor buttons
as desired.
Mode 5
Networked mode in combination with Cat-5 wired C-Bus® units
The C-Bus® Wireless Gateway is used to link a C-Bus® Wireless
network to a C-Bus® Cat-5 wired network. It is functionally
equivalent to a C-Bus® Network Bridge. Using the Gateway,
C-Bus® Wireless and Cat-5 networks can communicate and
interact with each other. Both Wireless and Cat-5 Network’s
use the same command structure, and are 100% compatible.
87
C-Bus Wireless System
®
(For Australia and New Zealand)
C-Bus Wireless Wall
Switch Range
®
• Allow existing, 240V a.c. operated wall switches to be
replaced with C-Bus® Wireless Wall Switches containing
C-Bus® Wireless technology
• Communicate with other C-Bus® Wireless devices using
radio frequency wireless messaging and form a C-Bus®
Wireless Network
• Switch buttons enable control of the load/s directly connected
to the wall switch and can also control loads connected to
other C-Bus® Wireless devices
• Each switch button can be programmed to function as an
on/off switch, a dimmer, or can issue a scene, as well as a
number of other options
• Can be controlled via C-Bus Cat-5 Wired Input Units
(via a Gateway Unit), such as touch screens
®
• Unique C-Bus® Wireless House Code
Wall Switches with Integral
Relay Outputs
Saturn™ Style
5882R8F1AA
C-Bus® Wireless wall
switch, 2 button,
1 channel relay, 8A
(fluorescent) rating
5884R8F1AA
C-Bus® Wireless wall
switch, 4 button,
1 channel relay, 8A
(fluorescent) rating
• 128-encrypted communications
• 2-Wire connection – active and load (no neutral required)
• Programmable via C-Bus® Learn features or via C-Bus®
Toolkit software
• Available in 1 channel and 2 channel versions
• Leading Edge and Trailing Edge Dimming Units, 1 channel
500VA and 2 Channel 250VA per channel
5886R8F1AA
C-Bus® Wireless wall
switch, 6 button,
1 channel relay,
8A (fluorescent) rating
• Relay unit, 1 channel 8A (fluorescent) rating and 2 Channel
4A (fluorescent) per channel
• Available in Neo® and Saturn™ and Modena style.
5884R4F2AA
C-Bus® Wireless wall switch,
4 button, 2 channel relay, 4A
(fluorescent) per channel rating
5886R4F2AA
C-Bus® Wireless wall switch,
6 button, 2 channel relay, 4A
(fluorescent) per channel rating
Available in white, black, cream and
mid-brown
88
C-Bus® Product Overview
Wall Switches with
Integral Relay Outputs
Modena Style
Wall Switches with
Integral Relay Outputs
Neo® Style
LHC2R8F1
C-Bus® Wireless wall switch,
2 button, 1 channel relay, 8A
(fluorescent) rating
5852R8F1AA
C-Bus® Wireless wall switch,
2 button, 1 channel relay,
8A (fluorescent) rating
LHC4R8F1
C-Bus® Wireless wall switch,
4 button, 1 channel relay, 8A
(fluorescent) rating
5854R8F1AA
C-Bus® Wireless wall switch,
4 button, 1 channel relay, 8A
(fluorescent) rating
LHC6R8F1
C-Bus® Wireless wall switch,
6 button, 1 channel relay, 8A
(fluorescent) rating
5858R8F1AA
C-Bus® Wireless wall switch,
8 button, 1 channel relay,
8A (fluorescent) rating
LHC4R4F2
C-Bus® Wireless wall switch,
4 button, 2 channel relay,
4A (fluorescent) per
channel rating
5854R4F2AA
C-Bus® Wireless wall switch,
4 button, 2 channel relay,
4A (fluorescent) per
channel rating
LHC6R4F2
C-Bus® Wireless wall switch,
6 button, 2 channel relay, 4A
(fluorescent) per channel rating
5858R4F2AA
C-Bus® Wireless wall switch,
8 button, 2 channel relay, 4A
(fluorescent) per channel rating
Available in white and black
Available in grey and silver, white electric,
cream, desert sand, soft grey, black
and brown
89
C-Bus Wireless System
®
(For Australia and New Zealand)
Wall Switches with Integral
Leading Edge Dimmer
Outputs
Saturn™ Style
Wall Switches with Integral
Leading Edge Dimmer
Outputs
Modena Style
5882D2L1AA
C-Bus® Wireless wall switch,
2 button, 1 channel leading
edge dimmer, 500VA
LHC2D2L1
C-Bus® Wireless wall switch, 2
button, 1 channel leading edge
dimmer, 500VA
5884D2L1AA
C-Bus® Wireless wall switch,
4 button, 1 channel leading
edge dimmer, 500VA
LHC4D2L1
C-Bus® Wireless wall switch, 4
button, 1 channel leading edge
dimmer, 500VA
5886D2L1AA
C-Bus® Wireless wall switch,
6 button, 1 channel leading
edge dimmer, 500VA
LHC6D2L1
C-Bus® Wireless wall switch, 6
button, 1 channel leading edge
dimmer, 500VA
5884D1L2AA
C-Bus® Wireless wall switch,
4 button, 2 channel leading
edge dimmer, 250VA
per channel
LHC4D1L2
C-Bus® Wireless wall switch, 4
button, 2 channel leading edge
dimmer, 250VA per channel
5886D1L2AA
C-Bus® Wireless wall switch,
6 button, 2 channel leading edge
dimmer, 250VA per channel
LHC6D1L2
C-Bus® Wireless wall switch, 6
button, 2 channel leading edge
dimmer, 250VA per channel
Available in white, black, cream and
mid-brown
Available in white and black
90
C-Bus® Product Overview
Wall Switches with Integral
Leading Edge Dimmer
Outputs
Neo® Style
Wall Switches with Integral
Trailing Edge Dimmer
Outputs
Saturn™ Style
5852D2L1AA
C-Bus® Wireless wall switch,
2 button, 1 channel leading edge
dimmer, 500VA
5882D2T1AA
C-Bus® Wireless wall switch,
2 button, 1 channel trailing edge
dimmer, 500VA
5854D2L1AA
C-Bus® Wireless wall switch,
4 button, 1 channel leading edge
dimmer, 500VA
5884D2T1AA
C-Bus® Wireless wall switch,
4 button, 1 channel trailing edge
dimmer, 500VA
5858D2L1AA
C-Bus® Wireless wall switch,
8 button, 1 channel leading edge
dimmer, 500VA
5886D2T1AA
C-Bus® Wireless wall switch,
6 button, 1 channel trailing edge
dimmer, 500VA
5854D1L2AA
C-Bus® Wireless wall switch,
4 button, 2 channel leading edge
dimmer, 250VA per channel
5884D1T2AA
C-Bus® Wireless wall switch,
4 button, 2 channel trailing edge
dimmer, 250VA per channel
5858D1L2AA
C-Bus® Wireless wall switch,
8 button, 2 channel leading edge
dimmer, 250VA per channel
5886D1T2AA
C-Bus® Wireless wall switch,
6 button, 2 channel trailing edge
dimmer, 250VA per channel
Available in grey and silver, white
electric, cream, desert sand, soft
grey, black and brown
Available in white, black, cream and
mid-brown
91
C-Bus Wireless System
®
(For Australia and New Zealand)
Wall Switches with Integral
Trailing Edge Dimmer
Outputs
Modena Style
Wall Switches with Integral
Trailing Edge Dimmer
Outputs
Neo® Style
LHC2D2T1
C-Bus® Wireless wall switch, 2
button, 1 channel trailing edge
dimmer, 500VA
5852D2T1AA
C-Bus® Wireless wall switch,
2 button, 1 channel trailing edge
dimmer, 500VA
LHC4D2T1
C-Bus® Wireless wall switch, 4
button, 1 channel trailing edge
dimmer, 500VA
5854D2T1AA
C-Bus® Wireless wall switch,
4 button, 1 channel trailing edge
dimmer, 500VA
LHC6D2T1
C-Bus® Wireless wall switch, 6
button, 1 channel trailing edge
dimmer, 500VA
5858D2T1AA
C-Bus® Wireless wall switch,
8 button, 1 channel trailing edge
dimmer, 500VA
LHC4D1T2
C-Bus® Wireless wall switch, 4
button, 2 channel trailing edge
dimmer, 250VA per channel
5854D1T2AA
C-Bus® Wireless wall switch,
4 button, 2 channel trailing edge
dimmer, 250VA per channel
LHC6D1T2
C-Bus® Wireless wall switch, 6
button, 2 channel trailing edge
dimmer, 250VA per channel
5858D1T2AA
C-Bus® Wireless Neo wall switch,
8 button, 2 channel trailing edge
dimmer, 250VA per channel
Available in white and black
Available in grey and silver,
white electric, cream, desert sand, soft
grey, black and brown
92
C-Bus® Product Overview
Saturn™ - Mounting Spacer
Rectangular Series
Neo™ - Mounting Spacer
Rectangular Series
5080SD,BK
Mounting spacer, rectangular,
black (pack of 5)
5050SD,CM
Mounting spacer, rectangular
5080SD,CM
Mounting spacer, rectangular,
cream (pack of 5)
Available in the following colours
White
Black
Brown
Cream
Desert Sand
Soft Grey
Available in the following colours
White
Black
Brown
Cream
Desert Sand
Soft Grey
93
C-Bus Wireless System
®
(For Australia and New Zealand)
C-Bus® Wireless Plug Adaptors
Relay
• Allow devices normally plugged into 240V a.c. general
purpose outlets (for example, lounge or bedside lamps or AV
equipment) to be controlled using C-Bus® Wireless technology
5812R10F1AA
C-Bus® Wireless plug adaptor,
1 channel relay, 10A
• Communicate with other C-Bus® Wireless devices (such
as Wireless Wall Switches) using radio frequency wireless
messaging and form a C-Bus® Wireless Network
• C-Bus® Wireless Plug Adaptors plug into existing power
outlets and the device to be controlled via C-Bus® Wireless
then piggybacks into the Plug Adaptor. No additions or
alterations to existing wiring are required
• Plug into a Standard Australian and New Zealand general
purpose electrical outlet
• Available in Leading Edge Dimming and Trailing Edge
Dimming Units, as well as a Relay output version
• Integral, easily accessible control/override/programming
buttons
• Can be controlled via C-Bus® Cat-5 wired Input units (via a
Gateway Unit), such as touch screens
• Unique C-Bus® Wireless House Code
• 128-encrypted communications
• Programmable via C-Bus® Learn features or via C-Bus®
Toolkit software.
94
C-Bus® Product Overview
LHC2R10F1
C-Bus® Wireless plug adaptor,
1 channel relay, 10A
Leading Edge Dimmer
Trailing Edge Dimmer
5812D3L1AA
C-Bus® Wireless plug adaptor,
1 channel leading edge dimmer, 3A
5812D2T1AA
C-Bus® Wireless plug adaptor,
1 channel trailing edge dimmer, 2A
LHC2D3L1
C-Bus® Wireless plug adaptor,
1 channel leading edge dimmer, 3A
LHC2D2T1
C-Bus® Wireless plug adaptor,
1 channel trailing edge dimmer, 2A
95
C-Bus Wireless System
®
(For Australia and New Zealand)
C-Bus® Wireless Remote
Control Unit
C-Bus® Wireless
Gateway
5888TXBA
C-Bus® Wireless
hand-held remote
control unit with holder
5800WCGA
C-Bus® Wireless Gateway
5080TXC
C-Bus® Remote
Control Holder (spare)
LHC8TXRF
C-Bus® Wireless
hand-held remote
control unit with
holder
• Allows control of buttons on C-Bus® Wireless Wall Switch
and Plug Adaptor units remotely
• Utilises radio frequency (RF) communication
• Allows seamless communication between a wired C-Bus®
network and a C-Bus® Wireless Network
• Desktop or wall mounted
• A C-Bus® Cat-5 cable connected to the wired C-Bus®
network is plugged into an RJ45 socket at the rear of the
Gateway
• Power for the Gateway is provided by the wired C-Bus®
network, no additional power source is required
• Does not need to be pointed directly at the unit
being controlled
• The connection to a C-Bus® Wireless network is
accomplished by a C-Bus® Learn Mode operation
• Capable of controlling up to 10 separate Wall Switch or
Plug Adaptor buttons
• The connection to a C-Bus® Cat-5 wired network requires
the use of the C-Bus® Toolkit software
• A single button on a Wall Switch or Plug Adaptor can be
controlled by up to two C-Bus® Wireless Remote Controls
• The Gateway supports routing of messages into and
through both wired and wireless networks
• Buttons are organised in two banks of five buttons. Banks
are alternately selected by pressing the ‘Shift’ button
• Up and Down buttons allow dimming of the level
associated with the last button selected (on dimmer units)
• ‘All Off’ button provides a convenient way to switch off all
buttons associated with the remote control unit
• C-Bus® Wireless Groups and Scenes can be controlled
from the remote
• LCD screen and buttons incorporate a blue LED backlight
• Each control button incorporates a clear window for
button labelling
• Supplied with pre-labelled stickers for identification of
common areas i.e. kitchen, lounge, dining etc
• 20-25m range (typical).
96
C-Bus® Product Overview
• Messages on each network (such as button presses) can
be passed through to the adjacent network.
Notes
97
Clipsal C-Bus
®
Typical Schematics
Home
98
C-Bus® Product Overview
Commercial High Rise Building
99
Clipsal Australia Pty Ltd
A member of Schneider Electric
Head Office
33-37 Port Wakefield Road,
Gepps Cross, South Australia 5094
Website clipsal.com/cis
Contact us cis@clipsal.com.au
You can find this brochure and many others online in
PDF format at: clipsal.com
CIS Technical Support Hotline:
1300 722 247 (Australia Only)
Follow the links off the home page or access the
following page directly: clipsal.com/brochures
National Customer Care Enquiries:
1300 2025 25
clipsal.com/cis
1300 2025 56
International Enquiries
International Sales and Marketing
Email export@clipsal.com.au
New Zealand
Schneider Electric (NZ) Ltd
Telephone +64 9 576 3403
Clipsal Australia Pty Ltd reserves the right to change
specifications, modify designs and discontinue items
without incurring obligation and whilst every effort
is made to ensure that descriptions, specifications
and other information in this catalogue are correct,
no warranty is given in respect thereof and the
company shall not be liable for any error therein.
© Clipsal Australia Pty Ltd
This material is copyright under Australian and
international laws. Except as permitted under the
relevant law, no part of this work may be reproduced
by any process without prior written permission of
and acknowledgement to Clipsal Australia Pty Ltd.
printed on recycled paper
CLIPCOM 22611 February 2011
The identified trademarks and copyrights are the property of Clipsal Australia Pty Ltd unless otherwise noted.
CIS1-009
National Customer Care Facsimile:
O/N 5805
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising