www.LarsonElectronics.com Catalog

www.LarsonElectronics.com Catalog
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Category:
Recharging Spotlights
11/20/2014
Page: 1
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Infrared LED Light Tower - 2, 24 Watt LEDs - 3' to 8' Extendable Tower - Rechargeable Battery
Part #: WAL-16LED-BP-IR
Price: $2,634.00
Made in the USA
The WAL-16LED-BP-IR infrared LED light tower is a fully portable and rechargeable unit and produces an infrared
flood of light that can only be seen through the use of night vision equipment designed to register infrared light.
This light tower offers a long list of features including versatile power and recharging options and provides an
extremely rugged infrared lighting solution that is ideal for use in commercial and industrial security applications
as well as military and law enforcement environments.
Click here to see the LED version of this
The WAL-16LED-BP-IR infrared LED light tower is a self contained and portable light tower package that offers high power
and extreme portability in a compact and durable design. This unit produces the infrared equivelent of 2880 lumens and
can run for up to 8.2 hours on a single full charge of its onboard batteries. This infrared LED light tower includes two 24
watt infrared LED lights mounted to a telescoping aluminum mast that can be adjusted from 3 to 8 feet in total height. The
entire package weighs 48 pounds and measures 22 inches tall by 9 inches in length by 14 inches wide, making it very easy
to stow and deploy.
This portable infrared LED light tower is designed to be easily deployed and can be set up in less than thirty seconds after
a single practice run to familiarize yourself with its operation. Approximately the size of a carry on suitcase, this unit weighs
only 48 lbs and includes a collapsible handle and wheels for easy transport around the deployment area. The heavy duty
Pelican style case contains all of the operational equipment and provides secure protection against damage from impacts
and contaminants when closed. When fully deployed, this unit will withstand 65 mph winds and can be extended to a total
of 8 feet in tower height for optimal illumination of the target area.
11/20/2014
Page: 2
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Photo to Enlarge
Click Photo to Enlarge
11/20/2014
Page: 3
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
The WAL-16LED-BP-IR portable infrared light tower incorporates a long list of impressive features including:
Power: AGM sealed lead acid battery, 12 VDC deep cycle with built-in charging system and a 600 charge life cycle or 3-5
year life cycle. This unit offers 4 power options, including an internal battery pack, the ability to allow AC recharging while in
use, and use as a jump and carry external battery pack with an included special plug. A built in AC charger (wall charger)
allows operators to easily recharge the battery, even while in use. This portable tower also accepts low voltage input from
vehicles and other battery packs to power the light or charge the battery. A DC port (cigarette plug socket) allows users to
power other DC devices, in effect allowing this unit to double as a portable 12VDC power supply. Included LED indicators
provide operators with the current battery charge conditions.
LED Light Bars: This tower includes two 24 watt infrared LED light heads that are IP68 rated waterproof to three meters
and constructed of extruded aluminum with polycarbonate lenses for the ultimate in durability. Each LED unit is controlled
by a separate switch, allowing operators to use the lights together or independently based on lighting requirements and
desired battery run time. Two LED light bars will run 8.25 hours, while a single infrared LED emitter will run 16.5 hours. The
LED light bar emitters are attached to the telescoping pole via an adjustable "T" style bracket. The LED light bars can
positioned at various ideal angles and the assembly will hold that position until changed by the operator. A single coil cord
provides power from the battery to the LED light heads.
Telescoping Tower: The aluminum telescoping tower on this unit is comprised of four sections and extends and locks into
place much the same as a camera tripod. The user simply opens the case, folds out the telescoping tower and then locks it
into position with a simple latching mechanism. The user can then extend the tower anywhere from 3 to 8 feet in total
height and simply tightens the locking clamps to lock the tower in position. The mast from ground level to top of light is 8’.
The actual pole is 6.5 feet long and the 18” case makes the total length 8 feet. Stability is provided by two stainless steel
spring loaded aluminum support legs that unfold from the case as well and are extended to 30 inches length and then
locked into place. This tower and support system provides a stable light platform even in windy conditions up to 65 mph.
Watertight Case: All the components of this portable light tower stow away within the watertight Pelican style case. This
case includes a carrying handle and wheels to provide easier transport around the deployment area and measures only 22
inches tall by 9 inches in length by 14 inches wide. There are no loose parts and all components fit within the case for easy
transport. All parts and controls are easily accesible simply by opening the front of the case, with controls located at the top
and the battery assembly at the bottom. The entire unit weighs only 48 pounds and can be easily stowed in back seats or
behind the seat of a pickup truck. This easy opening case and collapsible tripod and support system results in a portable
high power infrared light tower than can be deployed in less than thirty seconds after a single practice run.
Additional Features:
Battery and lights will function at -40 F/C and + 185F / 85C.
Battery charger has charge indicator to show level of charge.
One year replacement warranty on battery pack and charger.
Approved for continuous charging.
Rocker switch for internal and external power operation.
220V 50/60htz charger available.
Option to order unit with infrared LED light heads in the 850 or 940NM ranges.
FAA, DOT, CAB, IA, and TA approved for air transport.
Made in USA Quality
Superior LED Benefits
11/20/2014
Page: 4
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
1. Watertight Pelican Style Case
2. IP68 Rated LED Light Heads are Waterproof and Dustproof
3. Aluminum Tower Mast and Spring Loaded Aluminum Outrigger Legs.
4. Nothing To Wire or Connect. All Parts Contained Within Case.
5. 27 Hour Runtime on a Single Charge.
6. Integral Handle and Wheels for Easy Transport.
7. High Power LEDs Produce Equivelent of 2880 Lumens.
8. One Year Replacement Warranty on Battery Pack and Charger
9. Adjustable From 3 to 8 Feet in Height.
1. 50,000+ hour lifespan.
2. Cool operation.
3. 100% recyclable.
4. No toxins-lead, mercury.
5. No UV light, infrared radiation or CO2 emissions.
6. Bright, even light maintains consistent color over time.
7. Instant on/off – No flickering, delays or buzzing.
8. No lenses or filters to reduce output.
9. Vibration/impact resistant.
10. Compact size..
11. Less frequent outages, higher output.
Specifications / Additional Information
WAL-16LED-BP-IR Portable Infrared LED Light Tower
Certification
Power: 12VDC
CE Certified
Battery: AGM Lead Acid, 12VDC, 33 amp hr, 600 Cycles
EN55015 EMI
Lamps: 2- 24 watt Infrared LEDs, IP68 Rated
EN61547 EMS
Total Lamp Watts: 48 watts
EN62471 Photobiological Safety
Tower: Adjustable Aluminum 3-8 Feet Total Height
Case: Pelican Style Watertight with Wheels and Handle
Dimensions: 22"-H x 9"-L x 14" W - Weight-48lbs
Total Lumens: 2880 Infrared Equivelent
Charging: 5 Hour charge time, 115VAC Built in AC Charger
Ratingsl: FAA, DOT, CAB, IA, TA Approved Air Transport
Special Orders- Requirements
Mounting: Portable Tower with 2- 3 Foot Outriggers
Contact us for special requirements
Run Time: Up To 8.25 Hours on Single Charge at Full Power
Toll Free: 1-800-369-6671
Operating Temp: -40 F/C and + 185F / 85C
Intl: 1-903-498-3363
E-mail: [email protected]
Scroll Down to Purchase
Links (Click on the below items to view):
- Dimensional Drawing
11/20/2014
Page: 5
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Golight Profiler II - Handheld Rechargeable Spotlight - 220/240 Intl Version
Part #: GL-8130INTL
Price: $1,887.00
11/20/2014
Page: 6
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
The GL-8130INTL from Larson Electronics is a 6.5 million candlepower, military grade rechargeable spotlight that produces a beam
width of 120 feet. The maximum beam distance is 3,600 feet and has a beam angle of 11 degrees. This Golight Profiler Searchlight has
been designed and manufactured according to military specifications.
The GL-8130INTL has a 55 Watt Axial Filament halogen bulb that generates an extremely bright, virtually perfect beam of light to eliminate
dark spots, cast a broad spectral pattern and reach distances of up to one mile. It also has a secondary 1 watt LED browsing lamp to conserve
power when the super bright halogen main beam is not needed.
This light has a two position patented swivel handle creating spotlight and lantern functionality. The on/off squeeze button features a locking
trigger switch. The GL-8130INTL also has an LED battery power level indicator gauge to help determine how much battery life is available. This
Golight is powered by a rechargeable Lithium-Ion battery pack. When fully charged the light will run for 60 minutes in searchlight mode and 50
hours when using just the LED. This light has a quick two hour charge time. It comes with a docking station charging system that runs on 12
VDC. It also comes with a 220/240V AC charger for international use and a 12 V direct run cord.
The GL-8130INTL is made up of a rugged weatherproof construction and has a carbon fiber reinforced housing and an aircraft aluminum
parabolic reflector. It has a high performance, high impact polycarbonate lens and is protected by a shock-proof rubber lens. It also has a
cushioned grip handle.
This image shows a dark road, similar to a narrow corridor.
This image shows the same road, this time with the Golight Profiler II illuminating it; easily reaching distances of more than 900'.
Specifications / Additional Information
GL-8130 Hand held Searchlight
This Model is for International Use
Lamp Type:55 Watt Halogen / 1 Watt LED
Color Temp: 4000 K
Dimensions: 10" x 8" x 8"
Run Time: 60 Hours in searchlight mode
Charge Time: 2 Hours
Beam Distance: 3,600 Feet
Voltage: 12V DC
Battery:Rechargeable Lithium Ion
Mounting: Hand held
Special Orders- Requirements
Weight: 3.5 Lbs
Contact us for special requirements
Toll Free: 1-800-369-6671
Fax: 1-903-498-3364
E-mail: [email protected]
Scroll Down to Purchase-
11/20/2014
Page: 7
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/20/2014
Page: 8
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Golight Profiler II - GL-8130-M Rechargeable Lithium Ion Profiler II Spotlight with Magnetic Base
Part #: GL-8130-M
Price: $1,867.00
11/20/2014
Page: 9
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
The GL-8130-M from Larson Electronics is a 6.5 million candlepower, military grade rechargeable spotlight that produces a beam
width of 120 feet. The maxiumum beam distance is 3,600 feet and has a beam angle of 11 degrees. This Golight Profiler Searchlight has
been designed and manufactured according to military specifications.
The GL-8130-M has a 55 Watt Axial Filament halogen bulb that generates an extremely bright, virtually perfect beam of light to eliminate dark
spots, cast a broad spectral pattern and reach distances of up to one mile. It also has a secondary 1 watt LED browsing lamp to conserve power
when the super bright halogen main beam is not needed.
This light has a two position patented swivel handle creating spotlight and lantern functionality. The on/off squeeze button features a locking
trigger switch. The GL-8130-M also has an LED battery power level indicator gauge to help determine how much battery life is available. This
Golight is powered by a rechargeable Lithium-Ion battery pack. When fully charged the light will run for 60 minutes in searchlight mode and 50
hours when using just the LED. This light has a quick two hour charge time. It comes with a docking station charging system that runs on 12
VDC. It also comes with a 115 VAC charger and a 12 V direct run cord.
The GL-8130-M is made up of a rugged weatherproof construction and has a carbon fiber reinforced housing and an aircraft aluminum
parabolic reflector. It has a high performance, high impact polycarbonate lens and is protected by a shock-proof rubber lens. It also has a
cushioned grip handle. We have added a 200 pound grip magnetic base to this Golight Profiler for easy mounting and hands free operation.
This image shows a dark road, similar to a narrow corridor.
This image shows the same road, this time with the Golight Profiler II illuminating it; easily reaching distances of more than 900'.
Specifications / Additional Information
GL-8130-M Handheld Searchlight
Lamp Type:55 Watt Halogen / 1 Watt LED
Color Temp: 4000 K
Dimensions: 10" x 8" x 8"
Run Time: 60 Hours in searchlight mode
Charge Time: 2 Hours
Beam Distance: 3,600 Feet
Voltage: 12V DC
Battery:Rechargeable Lithium Ion
Mounting: Magnetic Base
Special Orders- Requirements
Weight: 3.5 Lbs
Contact us for special requirements
Toll Free: 1-800-369-6671
Fax: 1-903-498-3364
E-mail: [email protected]
Scroll Down to Purchase-
11/20/2014
Page: 10
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/20/2014
Page: 11
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/20/2014
Page: 12
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Golight Profiler 2 - GL-8130 Rechargeable Lithium Ion Spotlight
Part #: GL-8130
Price: $1,647.00
11/20/2014
Page: 13
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
The GL-8130 from Larson Electronics is a 6.5 million candlepower, military grade rechargeable spotlight that produces a beam
width of 120 feet. The maxiumum beam distance is 3,600 feet and has a beam angle of 11 degrees. This Golight Profiler Searchlight has
been designed and manufactured according to military specifications.
The GL-8130 has a 55 Watt Axial Filament halogen bulb that generates an extremely bright, virtually perfect beam of light to eliminate dark
spots, cast a broad spectral pattern and reach distances of up to one mile. It also has a secondary 1 watt LED browsing lamp to conserve power
when the super bright halogen main beam is not needed.
This light has a two position patented swivel handle creating spotlight and lantern functionality. The on/off squeeze button features a locking
trigger switch. The GL-8130 also has an LED battery power level indicator gauge to help determine how much battery life is available. This
Golight is powered by a rechargeable Lithium-Ion battery pack. When fully charged the light will run for 60 minutes in searchlight mode and 50
hours when using just the LED. This light has a quick two hour charge time. It comes with a docking station charging system that runs on 12
VDC. It also comes with a 115 VAC charger and a 12 V direct run cord.
The GL-8130 is made up of a rugged weatherproof construction and has a carbon fiber reinforced housing and an aircraft aluminum parabolic
reflector. It has a high performance, high impact polycarbonate lens and is protected by a shock-proof rubber lens. It also has a cushioned grip
handle.
This image shows a dark road, similar to a narrow corridor.
This image shows the same road, this time with the Golight Profiler II illuminating it; easily reaching distances of more than 900'.
Specifications / Additional Information
GL-8130 Handheld Searchlight
Lamp Type:55 Watt Halogen / 1 Watt LED
Color Temp: 4000 K
Dimensions: 10" x 8" x 8"
Run Time: 60 Hours in searchlight mode
Charge Time: 2 Hours
Beam Distance: 3,600 Feet
Voltage: 12V DC
Battery:Rechargeable Lithium Ion
Mounting: Handheld
Special Orders- Requirements
Weight: 3.5 Lbs
Contact us for special requirements
Toll Free: 1-800-369-6671
Fax: 1-903-498-3364
E-mail: [email protected]
Scroll Down to Purchase-
11/20/2014
Page: 14
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
11/20/2014
Page: 15
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
990-DCA Acro 990 Car Adapter - 12/24 Volt DC
Part #: 990-DCA
Price: $1,079.50
THIS PRODUCT HAS BEEN DISCONTINUED AND WILL NO LONGER BE CARRIED. ALL STOCK HAS BEEN DEPLETED.
12 volt/24 volt car adapter for Acro 990 HID Flashlight. This car adapter takes the shape and functional form of the existing batteries. This
unit slides into the same slot as the batteries at the base of the Acro 990 and plugs into the cigarette adapter. The 990 HID flashlight will
run on the vehicle's battery. The 990 HID spotlight operates like a rechargeable screw gun. The HID 990X batteries are interchangeable.
The vehicle adapter is interchangeable with the batteries. The vehicle adapter does not charge the existing batteries. An AC/DC converter
with 15 amp capacity can be used in conjunction with this vehicle adapter to enable the 990X to run on 110AC or 240AC (normal wall
plugs).
Spare battery sold separately.
11/20/2014
Page: 16
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/20/2014
Page: 17
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
35 Watt HID Handheld Spotlight - 3200 Lumen - 2, 70-Min. Batteries - Vehicle Adapter w/ Mag. Mount
Part #: 990X-M-DC
Price: $998.00
The 990X-M-DC has a 35 Watt, Xenon 4300 Kelvin, High Intensity Discharge (HID) bulb, 3200 lumens - produces 2700 lux at 25 feet (4 Dcell Maglite produces 280 lux at 25 feet). The 990X-M-DC features a 4000 foot beam, articulating head, a 12 Volt vehicle adapter pack w/
200 pound grip magnetic base, focusable beam and two interchangeable batteries. Please note that only the vehicle adapter comes
equipped with a 200lb. magnetic base.
This image shows a dark street, illuminated by nothing but distant street lights.
This image shows the same road, this time being illuminated by the 990X. Notice the white picket fence at the end of the road, approx.
3800' away being illuminated clearly by the 990X.
11/20/2014
Page: 18
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
In this image, the 990X-M-DC is showed in flood mode (simply twist the lens to adjust from spot to flood) is shown illuminating the dark
road.
• 5 inch diameter magnet with 200 pounds of gripping pull attached to base of 12v vehicle adapter
• Adjustable beam from flood to spot - beam patterns show below
• Heavy-duty cast aluminum head with composite lower housing
• 70 minute run time per battery (2 batteries with come with each 990X-M-DC flashlight)
• System includes 990X-M-DC light, 2 rechargeable Ni-MH 12V Rechargeable 4.5 AH Ni-MH batteries, AC charger, 12 volt vehicle
adapter w/ 200lb. magnet base, as well as a carrying strap and case.
• Charge cord plugs directly into the battery (the 990X-M-DC can be in use while spare battery is charging)
• Head pivots from 90 to 180 degrees with the push of a button (no tools needed)
• Dimensions: lens is 5 inches in diameter; when positioned in the 90 degree angle, the unit stands 12 inches high and 8 inches long;
when fully extended, the unit is 15.5 inches in length
• Lens focus ring adjusts approximately 1/4 turn for focus adjustment to beam pattern
• Compact ballast incorporated into lamp housing for portable, light weight use
• Dust and water resistant design
• 12V car adapter for extended run time
• Average current draw @12 VDC:
Start: 12.2amp, Run: 3.3amp (in under 60 sec.)
• Average recharge time: 4 hours - For those of you looking to use an vehicle inverter to recharge the light - the batteries draw .4 amps,
so a 75 watt inverter is required
• Weight: Flashlight with battery, 6 lbs/2.7kg
Complete kit, 13 lbs 3 oz/ 5.98kg \
• Easy-to-use slide on/off switch
• Led charging indicator on battery; red indicates charging, green indicates fully charge
• Over 50% less energy consumption compared to conventional lighting
• Professional grade unit for industrial, agricultural, law enforcement, emergency service, fire, search & rescue and marine use
LUX Measurements: In SPOT
At The Lens: N/A
At 10 Ft: 40,800
At 15 Ft:8,200
Lens Temp: 121 Degrees F
11/20/2014
Page: 19
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Head Temp: 91 Degrees F
Lux Measurements: In FLOOD
At the Lens: N/A
At 10 Ft: 4,680
At 15 Ft: 2,010
Lens Temp: 121 Degrees F
Head Temp: 91 Degrees F
For those of you familiar with cordless tools, this HID flashlight works just like any cordless drill. The batteries snap in and out of the base
easily. One battery can be charging while the other is in use. A separate accessory, the vehicle adapter snaps into the battery socket,
enabling users to run the light off of a 12 volt or 24 volt vehicle's power system indefinitely.
11/20/2014
Page: 20
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Manual
- STEP
- DXF
11/20/2014
Page: 21
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Rechargeable HID Spotlight - 200lb. Grip Magnetic Base - 4000' Beam - Flood/Spot Combo - 35 Watts
Part #: RL-10-M
Price: $948.00
11/20/2014
Page: 22
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/20/2014
Page: 23
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
The RL-10-M HID Rechargeable Handheld Light from Larson Electronics has a 35 Watt HID bulb that produces 3200 lumens of light
output capable of reaching distances to 4,000 feet. The RL-10 features several benefits, including a 4,000 foot beam, articulating head,
focusable beam and interchangeable batteries. This HID flashlight can also operate directly off of a 12 volt or 24 volt vehicle system via
optional vehicle adapter.
The RL-10-M comes complete with the flashlight, two rechargeable NiMH 12V batteries, an AC charger, a 200 pound grip magnetic base, a
carrying strap and a case. This is a professional grade unit for industrial, agricultural, law enforcement, emergency services, fire search and
rescue and marine use.
11/20/2014
Page: 24
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This image shows a dark street, illuminated by distance street lights.
SPOT Mode
FLOOD Mode
LUX Measurements:
SPOT
FLOOD
At the lens:
N/A
N/A
At 10 Feet:
40,800
4,680
At 15 Feet:
8,200
2,010
Lens Temp:
121 Degrees F
121 Degrees F
Head Temp:
91 Degrees F
91 Degrees F
The head on the RL-10-M is made up of heavy duty aluminum and is five inches in diameter. The head on this unit pivots from 90 degrees to 180
degrees with the push of a button. The beam adjusts from flood to spot by rotating the lens. A compact ballast incorporated into the lamp housing
provides portability and light weight use. We have attached a 200 pound grip magnetic base to the bottom of the RL-10 to provide hands free
operation.
Power: These flashlights are powered by rechargeable Ni-MH 12 volts batteries. The average recharge time of these batteries is four hours. An
LED charging indicator light will illuminate RED when charging and GREEN when fully charged. The charge cord plugs directly into the battery.
Each battery has a 70 minute runtime on a full charge.
Note about this HID Flashlight: To date, this is the brightest, toughest portable HID flashlight we have seen. While this started out as a Chinese
made flashlight, the electronics and optics of this model has been completely re-engineered to a higher specification, including the use of a GE
bulb, 4300 kelvin gas, Taiwanese ballast, Taiwanese switch, etc. We have looked at 50 and 70 watt HID spotlights and flashlights (which use a
35 watt bulb with higher wattage ballast) but there is little comparison. The sheer volume of projected natural colored light, combined with very
tough inner and outer construction make this handheld HID flashlight unique.
Note about Batteries: While lithium ion batteries are very popular right now, they do not push power to the light quickly. Ni-MH batteries will cut
the startup time of HID lights nearly in half. This HID flashlight will reach full power in just a few seconds, while many others will require 8-10
seconds to reach full power. Lithium ion batteries are light, have no memory and hold their charge over time on the shelf. The Ni-MH batteries in
this HID flashlight have similar properties. When NI-MH batteries are constructed properly, they have no memory and hold their charge over time
on the shelf. The Ni-MH batteries in this HID flashlight will discharge completely over a 6 month period of inactivity, where lithium ion batteries
take longer to discharge (9-12 months). Lithium ion batteries are very expensive compared to the Ni-MH batteries, which can often double the
final price of the HID flashlight. This HID flashlight uses high quality Ni-MH batteries, with run time, recharge and discharge properties similar to
lithium ion batteries. These Ni-MH batteries enable the use of higher quality ballast and optics, while keeping the final price competitive. These Ni
-MH batteries also enable the light to start more quickly, but they are approximately 1.5 pounds heavier than a lithium ion battery alternative.
For those that are familiar with cordless tools, this HID flashlight works just like any cordless drill. The batteries snap in and out of the base
easily. One battery can be charging while the other is in use. A separate accessory, the vehicle adapter snaps into the battery socket, enabling
users to run the light off of a 12 volt or 24 volt vehicle's power system indefinitely.
11/20/2014
Page: 25
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RL-10-M HID Handheld Flashlight
Lamp Type: 35 Watt Xenon HID (High Intensity Discharge) Bulb
Dimensions: 5" Lens Diameter x 15.5" L
Weight: 6 Lbs - Light w/ battery 13 Lbs - Complete Kit
Total Watts: 35 watts
Voltage: 12V DC
Lighting Configuration: Flood and Spot Light Combo
Amps: 12.2 Starting Amps; 3.3 Run Amps
Mounting: Hand Held; 200 pound grip magnetic base
Total Lumens: 3,200
Runtime: 70 minutes
Special Orders- Requirements
Lamp Color Temperature: 4300 Kelvin
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]s.com
Scroll Down to Purchase-
Links (Click on the below items to view):
- Manual
11/20/2014
Page: 26
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Rechargeable HID Light with Rotating, Tilting Magnetic Base - RL-11-M
Part #: RL-11-M
Price: $918.00
The RL-11 is a High Intensity Discharge (HID) light with a 35 watt HID lamp, producing 3200 lumens (approximately 15 million candlepower
in a retail setting). In a side by side test, it outperforms the $4000+ Surefire Hellfighter in brightness and distance. The RL-11 produces a
3000 foot beam in the 4300K color range (daylight color). The RL-11 HID light is “instant on” and takes less than 2 seconds to come to full
power and color. See the pictures below for beam description. The RL-11 is assembled in the United States and carries a 3 year
warranty.
Weatherproof Operation
A booted push button switch on the top and a flat bottom surface makes the RL-11 a popular handheld, weatherproof work light for indoor
and outdoor use. An integral micro-relay enables the user to power this HID light from 12/24V vehicle or boat cigarette plug socket
directly. Once disconnected, the light will automatically switch to the lithium ion battery, which will support the light for 90 minutes. A 4
hour recharge time is required to top off the battery, but as a lithium ion it is not necessary to fully charge or discharge the battery to
maintain the longevity. The battery shelf life is about 16 months (i.e. you can fully charge the battery and leave it the tool box for up to 16
months and it will still have a charge left when you go to use it).
Beam power and longevity
The RL-11 HID light is configured to deliver a spot beam in excess of 3000 feet. A snap on diffuser lens is included in the blow mold style
carrying case that enables the operator to convert the light to a soft, wide flood beam that covers an area 200 feet long and 200 feet wide.
The 35 Watt Philips HID bulb does not contain a breakable filament and is rated for 2500 hours of life.
Click Here for Instructions on Swapping Out HID Light Bulb
RL-11-M Package Contents
The light comes with a blow mold carrying case, HID light, 4400 mah battery, flood lens, shoulder strap, removable magnetic base and wall
charger. The case has room to store a spare battery and accessory vehicle coil cord with cigarette plug.
The battery requires 4 hours to fully recharge. Spare batteries are available and easily changed. The round screw on tail cap at the back
of the light accesses the battery which slides out. A second battery can be used while another discharged battery is charging. The light
can also be used without a battery, by simply attaching the optional accessory coil cord to the plug in the back of the light. The RL-11 HID
light will run indefinitely from an alternate 12/24V power source, including vehicle, boat and ATV cigarette plug sockets. The light can be
11/20/2014
Page: 27
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
attached via accessory cord to any power source ranging from 9-32 volts.
THERE IS NO VEHICLE CHARGER FOR THE BATTERY. The battery is charged via a wall outlet. For vehicle charging of the battery, a
75 Watt inverter in required. The charger draws .4 amps.
Dimensions
The lens is 3.9 inches OD. The light is 11 inches long, 7.5 inches tall, 4 inches wide. The RL-11 weighs 4.6 pounds.
Electrical:
The RL-11 HID light draws 13.3 amps to start for 60 seconds and then 3.3 amps to run.
Magnetic base
The RL-11-M includes a swiveling, tilting magnetic base that is removable. This enables the operator to attach the light to any steel
surface and position the beam. It is also popular for non-metallic surfaces, because the same beam positioning ability works on nonmetallic surfaces as well. Basically, the operator can set the light down and the swiveling and tilting base holds the beam position that the
operator establishes for the light. The magnetic base can be unscrewed and removed so that the RL-11 is more portable for traditional
handheld use.
Popular accessories include the covert IR lens, snap on red hunting lens, snap on amber lens for fog/smoke and the accessory coil cord
with cigarette plug.
LUX Measurements: In SPOT
At The Lens: N/A
At 10 Ft: 33,500
11/20/2014
Page: 28
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
At 15 Ft: 11,820
Lens Temp: 136 Degrees F
Head Temp: 98 Degrees F
Lux Measurements: In FLOOD
At the Lens: N/A
At 10 Ft: 826
At 15 Ft: 382
Lens Temp: 120 Degrees F
Head Temp: 90 Degrees F
SCROLL DOWN TO SEE BEAM PICTURES AND ADDITIONAL PRODUCT PICTURES.
2800 foot street with natural lighting.
2800 foot street with RL-11 HID light.
11/20/2014
Page: 29
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/20/2014
Page: 30
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Rechargeable HID Search Light - 200lb. Magnetic Base - 4000' Spot Beam - Flood/Spot Combo - 35 Watt
Part #: Acro 990X-M
Price: $898.00
The 990X-M has 35 Watt, Xenon 4300 Kelvin bulb High Intensity Discharge (HID) bulb, 3200 lumens - produces 2700 lux at 25 feet (4 Dcell Maglite produces 280 lux at 25 feet) and 4000 foot beam. The 990X-M features a 4000 foot beam, articulating head, 200 pound grip
magnetic base, focusable beam and two interchangeable batteries.
This image shows a dark street, illuminated by nothing but distant street lights.
This image shows the same road, this time being illuminated by the Acro 990X. Notice the white picket fence at the end of the road,
approx. 3800' away being illuminated clearly by the Acro 990X.
In this image, the Acro 990X in flood mode (simply twist the lens to adjust from spot to flood) is shown illuminating the dark road.
• 5 inch diameter magnet with 200 pounds of gripping pull attached to base of flashlight
11/20/2014
Page: 31
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
• Adjustable beam from flood to spot - beam patterns show below
• Heavy-duty cast aluminum head with composite lower housing
• 70 minute run time per battery (2 batteries with come with each Acro 990X flashlight)
• System includes 990X light, 2 rechargeable Ni-MH 12V Rechargeable 4.5 AH Ni-MH batteries, AC charger, carrying strap and case.
One battery includes an integral 200lb magnetic grip base.
• Charge cord plugs directly into the battery (the 990X can be in use while spare battery is charging)
• Head pivots from 90 to 180 degrees with the push of a button (no tools needed)
• Dimensions: lens is 5 inches in diameter; when positioned in the 90 degree angle, the unit stands 12 inches high and 8 inches long;
when fully extended, the unit is 15.5 inches in length
• Lens focus ring adjusts approximately 1/4 turn for focus adjustment to beam pattern
• Compact ballast incorporated into lamp housing for portable, light weight use
• Dust and water resistant design
• Optional 12V car adapter* for extended run time
• Average current draw @12 VDC:
Start: 12.2amp, Run: 3.3amp (in under 60 sec.)
• Average recharge time: 4 hours - For those of you looking to use an vehicle inverter to recharge the light - the batteries draw .4 amps,
so a 75 watt inverter is required
• Weight: Flashlight with battery, 6 lbs/2.7kg
Complete kit, 13 lbs 3 oz/ 5.98kg \
• Easy-to-use slide on/off switch
• Led charging indicator on battery; red indicates charging, green indicates fully charge
• Over 50% less energy consumption compared to conventional lighting
• Professional grade unit for industrial, agricultural, law enforcement, emergency service, fire, search & rescue and marine use
LUX Measurements: In SPOT
At The Lens: N/A
At 10 Ft: 40,800
At 15 Ft:8,200
Lens Temp: 121 Degrees F
Head Temp: 91 Degrees F
Lux Measurements: In FLOOD
11/20/2014
Page: 32
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
At the Lens: N/A
At 10 Ft: 4,680
At 15 Ft: 2,010
Lens Temp: 121 Degrees F
Head Temp: 91 Degrees F
11/20/2014
Page: 33
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
For those of you familiar with cordless tools, this HID flashlight works just like any cordless drill. The batteries snap in and out of the base
easily. One battery can be charging while the other is in use. A separate accessory, the vehicle adapter snaps into the battery socket,
enabling users to run the light off of a 12 volt or 24 volt vehicle's power system indefinitely.
Links (Click on the below items to view):
- Manual
- STEP
- DXF
11/20/2014
Page: 34
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
ACRO LIGHTS 990X- International Version 230/240 Volts - Rechargeable HID Flashlight - 3200 Lumens
Part #: 990X-INTL
Price: $818.00
11/20/2014
Page: 35
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click to see more pictures of Acro 990X HID Flashlight
• Acro 990X has 35W Xenon 43K bulb HID bulb, 3200 lumens - produces 2700 lux at 25 feet (4 D-cell Maglite produces 280 lux at
25 feet)
• Beam adjusts from flood to spot by rotating the lens - beam patterns show below
• Heavy-duty cast aluminum head with composite lower housing
• 70 minute run time per battery (2 batteries with come with each Acro 990X flashlight)
• System includes Acro X990 light, 2 rechargeable Ni-MH 12V Rechargeable 4.5 AH Ni-MH batteries, AC charger, carrying strap and
case
• Charge cord plugs directly into the battery (the X990 can be in use while spare battery is charging)
• Head pivots from 90 to 180 degrees with the push of a button (no tools needed)
• Dimensions: lens is 5 inches in diameter; when positioned in the 90 degree angle, the unit stands 12 inches high and 8 inches long;
when fully extended, the unit is 15.5 inches in length
• Lens focus ring adjusts approximately 1/4 turn for focus adjustment to beam pattern
• Compact ballast incorporated into lamp housing for portable, light weight use
• Dust and water resistant design
• Optional 12V car adapter* for extended run time
• Average current draw @12 VDC:
Start: 12.2amp, Run: 3.3amp (in under 60 sec.)
11/20/2014
Page: 36
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
• Average recharge time: 4 hours - For those of you looking to use an vehicle inverter to recharge the light - the batteries draw .4 amps,
so a 75 watt inverter is required
• Weight: Flashlight with Battery, 6 lbs/2.7kg
Complete kit, 13 lbs 3 oz/ 5.98kg \
• Easy-to-use slide on/off switch
• Led charging indicator on battery; red indicates charging, green indicates fully charge
• Over 50% less energy consumption compared to conventional lighting
• Professional grade unit for industrial, agricultural, law enforcement, emergency service, fire, search & rescue and marine use
LUX Measurements: In SPOT
At The Lens: N/A
At 10 Ft: 40,800
At 15 Ft:8,200
Lens Temp: 121 Degrees F
Head Temp: 91 Degrees F
Lux Measurements: In FLOOD
At the Lens: N/A
At 10 Ft: 4,680
At 15 Ft: 2,010
Lens Temp: 121 Degrees F
Head Temp: 91 Degrees F
NOTE ABOUT THIS HID FLASHLIGHT: In addition to manufacturing our own line of spotlights, we evaluate many
other spotlights and flashlights. To date, this is brightest, toughest portable HID flashlight we have seen. While this
started out as a Chinese made flashlight, the electronics and optics of this model has been completely re-engineered
to a higher specification, including the use of a GE bulb, 4300 kelvin gas, Taiwanese ballast, Taiwanese switch, etc.
We have looked at 50 watt and 70 watt HID spotlights and flashlights (which use a 35 watt bulb with higher wattage
ballast) but there is little comparison. The sheer volume of projected natural colored light, combined with very tough
inner and outer construction make this handheld HID flashlight unique.
For those of you familiar with cordless tools, this HID flashlight works just like any cordless drill. The batteries snap in
and out of the base easily. One battery can be charging while the other is in use. A separate accessory, the vehicle
adapter snaps into the battery socket, enabling users to run the light off of a 12 volt or 24 volt vehicle's power system
indefinitely.
NOTE ABOUT BATTERIES: While lithium ion batteries are very popular right now, they do not push power to the
light quickly. Ni-MH batteries will cut the startup time of HID lights nearly in half. This HID flashlight will reach full
power in just a few seconds, while many others will require 8-10 seconds to reach full power. Lithium ion batteries are
light, have no memory and hold their charge over time on the shelf. The Ni-MH batteries in this HID flashlight have
similar properties. When Ni-MH batteries are constructed properly, they have no memory and hold their charge over
time on the shelf. The Ni-MH batteries in this HID flashlight will discharge completely over a 6 month period of
inactivity, where lithium ion batteries will take longer to discharge (9-12 months). Lithium ion batteries are very
expensive compared to the Ni-MH batteries, which can often double the final price of the HID flashlight. This HID
11/20/2014
Page: 37
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
flashlight uses high quality Ni-MH batteries, with run time, recharge and discharge properties similar to lithium ion
batteries. These Ni-MH batteries enable the use of higher quality ballast and optics, while keeping the final price
competitive. These Ni-MH batteries also enable the light to start more quickly, but they are approximately 1.5 pounds
heavier than a lithium ion battery alternative.
Links (Click on the below items to view):
- Dimensional Drawing
- STEP
- DXF
11/20/2014
Page: 38
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Rechargeable HID Handheld Light - RL-11
Part #: RL-11
Price: $798.00
11/20/2014
Page: 39
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in The USA
The RL-11 rechargeable HID handheld light contains a 35 watt HID bulb and produces 3,500 lumens of intense light output. The RL-11
produces a 3000 foot beam in the 4300K color range and in side by side tests, outperforms the $4,000+ Surefire Hellfighter in
brightness and distance. This high power HID light reaches full power in less than 2 seconds, is waterproof, and will run for 90
minutes on a single charge of its lithium-ion battery.
The RL-11 is a High Intensity Discharge (HID) light with a 35 watt HID lamp producing 3200 lumens (approximately 15 million candlepower in a
retail setting). In a side by side test, it outperforms the $4000+ Surefire Hellfighterв„ў in brightness and distance. The RL-11 produces a 3000 foot
beam in the 4300K color range (daylight color). A snap on diffuser lens is included in the blow mold style carrying case that enables the operator
to convert the light to a soft, wide flood beam that covers an area 200 feet long and 200 feet wide. The 35 Watt Philips HID bulb does not contain
a breakable filament and is rated for 2500 hours of life. The RL-11 HID light is “instant on” and takes less than 2 seconds to come to full power
and color.
In comparisons against the Surefire Hellfighter ($4000+), the RL-11 clearly reaches a longer distance with a brighter beam. The Surefire
Hellfighter has some other unique features that make it applicable for crew served weapons which accounts for some of the price difference. The
RL-11 also includes a 90 minute run-time lithium ion battery, which the Surefire Hellfighter does not include. We mention simply to illustrate the
performance, quality and value aspect of this light against a very high quality tactical solution like the Hellfighter. The RL-11 is assembled in the
United States and carries a 3 year warranty.
This rechargeable HID light is weatherproof and resists the intrusion of water and dust. A booted push button switch on the top and a flat bottom
surface makes the RL-11 a popular handheld, weatherproof work light for indoor and outdoor use.
2800 foot street with normal lighting.
2800 foot street with RL-11 HID light.
Click Photo to Enlarge
Click Photo to Enlarge
The 4400mAH lithium-Ion battery in this unit is charged via an included 120 Volt AC wall charger and charging cord. This unit is charged in
approximately 4 hours and has a runtime of 90 minutes on a single charge. An integral micro-relay enables the user to power this HID light from
12/24V vehicle or boat cigarette plug socket directly. Once disconnected, the light will automatically switch to the lithium-ion battery. These
lithium ion batteries require no special charging procedures and have no charge memory issues. Using the latest lithium ion battery technology
allows this unit to be recharged regardless of current charge levels, so there is no need to fully discharge the light before recharging. The battery
will hold its charge for 16 months, even when on the shelf.
The RL-11 HID light is configured to deliver a spot beam in excess of 3000 feet. A snap on diffuser lens is included in the blow mold style
carrying case that enables the operator to convert the light to a soft, wide flood beam that covers an area 200 feet long and 200 feet wide. The 35
Watt Philips HID bulb does not contain a breakable filament and is rated for 2500 hours of life.
The light comes with a blow mold carrying case, HID light, 4400 mah battery, flood lens, shoulder strap and wall charger. The case has room to
store a spare battery and accessory vehicle coil cord with cigarette plug. Spare batteries are available and easily changed by unscrewing the
round screw on tail cap at the back of the light to accesses the battery which slides out. A second battery can be used while another discharged
battery is charging. The light can also be used without a battery, by simply attaching the optional accessory coil cord to the plug in the back of the
light. The RL-11 HID light will run indefinitely from an alternate 12/24V power source, including vehicle, boat and ATV cigarette plug sockets. The
light can be attached via accessory cord to any power source ranging from 9-32 volts. THERE IS NO VEHICLE CHARGER FOR THE BATTERY.
The battery is charged via the included wall outlet charging unit. For vehicle charging of the battery, a 75 Watt inverter is required.
11/20/2014
Page: 40
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Accessories: The most popular accessory is the RL-11-MB which is a swiveling, tilting magnetic base that is removable. This enables the
operator to attach the light to any steel surface and position the beam. It is also popular for non-metallic surfaces, because the same beam
positioning ability works on non-metallic surfaces as well. Basically, the operator can set the light down and the swiveling and tilting base holds
the beam position that the operator establishes for the light. The magnetic base can be unscrewed and removed so that the RL-11 is more
portable for traditional handheld use. Other popular accessories include the covert IR lens, snap on red hunting lens, snap on amber lens for
fog/smoke, and the accessory coil cord with cigarette plug.
High Quality Construction
1. High Power HID Lamp- 3200 Total Lumens 15 Million candlepower.
2. Heavy duty weatherproof housing with booted switch.
3. 3,000 foot beam..
4. Lithium-Ion battery.
5. Durable HID bulb has no filament.
6. 90 minute Runtime on single charge.
7. 120 VAC Wall outlet charger / Optional 12/24 VDC power connector.
8. Included diffuser lens for flood beam configuration..
11/20/2014
Page: 41
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RL-11 High Intensity Discharge (HID) light
Features
Lamp Type: HID
Outperforms Surefire Hellfighterв„ў
Dimensions: 11"-L 3.4"-W 5.7.5"-H
Rechargeable Lithium-Ion Battery
Weight: 4.6 Lbs.
3000 Foot Beam
Power: Rechargeable Lithium-Ion Batteries
Weatherproof
Runtime: 90 Minutes
Included Case - Flood Lens
Lumens: 3200
Amps: 13.3 amps 60 Seconds for Start, 3.3 amps Run.
Watts: 35
Weatherproof: Yes
Charging unit: 120 VAC, Wall Charger Only
Special Orders- Requirements
LUX- Spot: 10 Ft: 33,500 / 15 Ft: 11,820
Contact us for special requirements
LUX- Flood: 10 Ft: 826 / 15 Ft: 382
Toll Free: 1-800-369-6671
Fax: 1-903-498-3364
E-mail: [email protected]
Scroll Down to Purchase-
Links (Click on the below items to view):
- Dimensional Drawing
- Manual
- STEP
- DXF
11/20/2014
Page: 42
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Acro 990X HID Rechargeable Flashlight with 3200 Lumens - Focusable Beam Pattern to 4000 Feet
Part #: Acro 990X
Price: $798.00
Acro 990X has 35 Watt Xenon 4300 Kelvin bulb High Intensity Discharge (HID) bulb, 3200 lumens - produces 2700 lux at 25 feet (4
D-cell Maglite produces 280 lux at 25 feet) and reaches 4000 feet. The 990X features several important benefits, including a 4000 foot
beam, articulating head, focusable beam and interchangeable batteries. This HID flashlight can also operate directly off of a 12 Volt or 24
Volt vehicle system via optional vehicle adapter.
This image shows a dark street, illuminated by nothing but distant street lights.
11/20/2014
Page: 43
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This image shows the same road, this time being illuminated by the Acro 990X. Notice the white picket fence at the end of the road,
approx. 3800' away being illuminated clearly by the Acro 990X.
In this image, the Acro 990X in flood mode (simply twist the lens to adjust from spot to flood) is shown illuminating the dark road.
• Beam adjusts from flood to spot by rotating the lens - beam patterns show below
• Heavy-duty cast aluminum head with composite lower housing
• 70 minute run time per battery (2 batteries with come with each flashlight)
• System includes Acro 990X light, 2 rechargeable Ni-MH 12V Rechargeable 4.5 AH Ni-MH batteries, AC charger, carrying strap and
case
• Charge cord plugs directly into the battery (the light can be in use while spare battery is charging)
• Head pivots from 90 to 180 degrees with the push of a button (no tools needed)
• Dimensions: lens is 5 inches in diameter; when positioned in the 90 degree angle, the unit stands 12 inches high and 8 inches long;
when fully extended, the unit is 15.5 inches in length
• Lens focus ring adjusts approximately 1/4 turn for focus adjustment to beam pattern
• Compact ballast incorporated into lamp housing for portable, light weight use
• Dust and water resistant design
• Optional 12V car adapter* for extended run time
• Average current draw @12 VDC:
Start: 12.2amp, Run: 3.3amp (in under 60 sec.)
• Average recharge time: 4 hours - For those of you looking to use an vehicle inverter to recharge the light - the batteries draw .4 amps,
so a 75 watt inverter is required
• Weight: Flashlight with Battery, 6 lbs/2.7kg - battery alone weighs 2.4 lbs
Complete kit, 13 lbs 3 oz/ 5.98kg \
• Easy-to-use slide on/off switch
• Led charging indicator on battery; red indicates charging, green indicates fully charge
• Over 50% less energy consumption compared to conventional lighting
• Professional grade unit for industrial, agricultural, law enforcement, emergency service, fire, search & rescue and marine use
LUX Measurements: In SPOT
At The Lens: N/A
At 10 Ft: 40,800
At 15 Ft:8,200
Lens Temp: 121 Degrees F
11/20/2014
Page: 44
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Head Temp: 91 Degrees F
Lux Measurements: In FLOOD
At the Lens: N/A
At 10 Ft: 4,680
At 15 Ft: 2,010
Lens Temp: 121 Degrees F
Head Temp: 91 Degrees F
11/20/2014
Page: 45
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
NOTE ABOUT THIS HID FLASHLIGHT: To date, this is brightest, toughest portable HID flashlight we have seen. While this started out
as a Chinese made flashlight, the electronics and optics of this model has been completely re-engineered to a higher specification,
including the use of a GE bulb, 4300 kelvin gas, Taiwanese ballast, Taiwanese switch, etc. We have looked at 50 watt and 70 watt HID
spotlights and flashlights (which use a 35 watt bulb with higher wattage ballast) but there is little comparison. The sheer volume of
projected natural colored light, combined with very tough inner and outer construction make this handheld HID flashlight unique.
NOTE ABOUT BATTERIES: While lithium ion batteries are very popular right now, they do not push power to the light quickly. Ni-MH
batteries will cut the startup time of HID lights nearly in half. This HID flashlight will reach full power in just a few seconds, while many
11/20/2014
Page: 46
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
others will require 8-10 seconds to reach full power. Lithium ion batteries are light, have no memory and hold their charge over time on the
shelf. The Ni-MH batteries in this HID flashlight have similar properties. When Ni-MH batteries are constructed properly, they have no
memory and hold their charge over time on the shelf. The Ni-MH batteries in this HID flashlight will discharge completely over a 6 month
period of inactivity, where lithium ion batteries will take longer to discharge (9-12 months). Lithium ion batteries are very expensive
compared to the Ni-MH batteries, which can often double the final price of the HID flashlight. This HID flashlight uses high quality Ni-MH
batteries, with run time, recharge and discharge properties similar to lithium ion batteries. These Ni-MH batteries enable the use of higher
quality ballast and optics, while keeping the final price competitive. These Ni-MH batteries also enable the light to start more quickly, but
they are approximately 1.5 pounds heavier than a lithium ion battery alternative.
For those of you that are familiar with cordless tools, this HID flashlight works just like any cordless drill. The batteries snap in and out of
the base easily. One battery can be charging while the other is in use. A separate accessory, the vehicle adapter snaps into the battery
socket, enabling users to run the light off of a 12 volt or 24 volt vehicle's power system indefinitely.
Links (Click on the below items to view):
- Dimensional Drawing
- Manual
- STEP
- DXF
11/20/2014
Page: 47
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof Rechargeable LED Trouble Light - Class 1 Div 1 - 2 Battery Packs - Spot/Flood Combo
Part #: EXP-LED-2XB-9W
Price: $653.64
Made in the USA
The Larson Electronics EXP-LED-2XB-9W rechargeable explosion proof LED light can be used as either an inspection light or a
general area work light, as it enables the operator the ability to change the beam from a long, tight spot beam to shorter, wider flood
beam. The runtime on this rechargeable explosion proof led light is approximately 8 hours using a 4.8 Volt NiMH battery pack and
features 3 high powered LEDs, adjustable beam focus, articulating head and “easy to change” battery packs.
The beam configuration on this explosion proof LED light can be changed from spot to flood in only a few seconds, making this light ideal as an
inspection light or a general area work. The operator can remove a clear lens to reveal the LED lens. With a thumb and forefinger, the operator
can pull the lens out for a longer, narrower spot beam or push it the lens inward for a wide area flood beam. The T3 temperature rating and Class
1, Division 1 and Division 2, Groups C & D rating on this handheld explosion proof LED light qualifies it for locations where flammable gases,
vapors, or liquids are constantly present.
11/20/2014
Page: 48
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Dark Field
EXP-LED-2XB-9W in Spot Mode
EXP-LED-2XB-9W in Flood Mode
Click Photos to Enlarge
Click Photos to Enlarge
Click Photos to Enlarge
EXP-LED-2XB-9W 3 LED Articulating Head
Click Photos to Enlarge
11/20/2014
Page: 49
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Swappable Battery Packs Within the Hazardous Locations Areas:
One of the most interesting features of this explosion proof LED light is the ability to swap battery packs within the hazardous location area. With
most rechargeable explosion proof flashlights or task lights, the operator must first step out of the hazardous location boundaries before he is
able to replace the battery. This particular explosion proof LED light keeps the operator efficient by eliminating the need to leave the work area to
change batteries. When the light has approximately 30 minutes left on the battery, an LED indicator light will start blinking. This blinking feature
will slow as the light reaches shut off point. This particular model comes with 2 battery packs that allow for 8 hours of run time each.
This unit comes with a 120VAC charger. The charger must be configured to the 1.8A setting before charging which can be done at the top left
corner of the charger. While charging, the pack has a LED indicator that switches from red to green when charging is complete. The operator
must take caution to not overcharge the battery as this will eventually affect the normal performance and service life of the battery. Although the
battery pack can be swapped out in the hazardous location, the battery itself cannot actually be charged within the hazardous area.
Articulating Head:
This hazardous location LED light is equipped with an adjustable knob that enables the operator to position the head of the LED light. The
operator loosens the knob, positions the LED light head and tightens the knob to hold the position. The power switch is below the adjustment
knob. By pressing the switch until a click is audible, the light will lock into either the ON or OFF position.
Trouble Light Style Hook:
This explosion proof LED light also serves as a task/drop light and comes standard with a top mounted hook for overhead hanging of the light.
The unit also comes standard with a nylon lanyard to avoid accidental dropping/damage to the LED light.
Specifications / Additional Information
EXP-LED-2XB-9W
U.L. Approvals
UL Listing: United States
Class 1, Division 1-2 Groups C, D
Dimensions: H-13.25" W-4-1/2" Depth-6" Wght- 4.15lbs
Total Watts: 9 watts- 3 Watts per LED
Battery: 4.8V NiMH Battery Pack
Mounting: Hook
Runtime: 8 Hours on full charge
Lamp Type:: LED
Lumens 740
Special Orders- Requirements
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
Click here to view the Explosion Proof Light Design Description
E-mail: [email protected]
Scroll Down to Purchase- Same Day Shipping on This Light!
11/20/2014
Page: 50
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/20/2014
Page: 51
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- Manual
11/20/2014
Page: 52
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
GL-8120-M Golight Profiler 1.3 million candlepower rechargeable spotlight with magnetic base
Part #: GL-8120-M
Price: $500.39
11/20/2014
Page: 53
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
The GL-8120-M from Larson Electronics is a 6.5 million candlepower, military grade rechargeable spotlight that produces a beam
width of 120 feet. The maxiumum beam distance is 3,600 feet and has a beam angle of 11 degrees. This Golight Profiler Searchlight has
been designed and manufactured according to military specifications.
The GL-8120-M has a 55 Watt Axial Filament halogen bulb that generates an extremely bright, virtually perfect beam of light to eliminate dark
spots, cast a broad spectral pattern and reach distances of up to one mile. It also has a secondary 1 watt LED browsing lamp to conserve power
when the super bright halogen main beam is not needed.
This light has a two position patented swivel handle creating spotlight and lantern functionality. The on/off squeeze button features a locking
trigger switch. The GL-8120-M also has an LED battery power level indicator gauge to help determine how much battery life is available. This
Golight is powered by a rechargeable Lithium-Ion battery pack. When fully charged the light will run for 60 minutes in searchlight mode and 50
hours when using just the LED. This light has a quick two hour charge time. It comes with a docking station charging system that runs on 12
VDC. It also comes with a 115 VAC charger and a 12 V direct run cord.
The GL-8120-M is made up of a rugged weatherproof construction and has a carbon fiber reinforced housing and an aircraft aluminum
parabolic reflector. It has a high performance, high impact polycarbonate lens and is protected by a shock-proof rubber lens. It also has a
cushioned grip handle. We have added a 100 pound grip magnetic base to this Golight Profiler for easy mounting and hands free operation.
This image shows a dark road, similar to a narrow corridor.
This image shows the same road, this time with the Golight Profiler II illuminating it; easily reaching distances of more than 900'.
Specifications / Additional Information
GL-8120-M Handheld Searchlight
Lamp Type:55 Watt Halogen / 1 Watt LED
Color Temp: 4000 K
Dimensions: 10" x 8" x 8"
Run Time: 60 Hours in searchlight mode
Charge Time: 2 Hours
Beam Distance: 3,600 Feet
Voltage: 12V DC
Battery:Rechargeable Lithium Ion
Mounting: Magnetic Base
Special Orders- Requirements
Weight: 3.5 Lbs
Contact us for special requirements
Toll Free: 1-800-369-6671
Fax: 1-903-498-3364
E-mail: [email protected]
Scroll Down to Purchase-
Links (Click on the below items to view):
- Manual
11/20/2014
Page: 54
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
GL Handheld Rechargeable 1.3 million CP Spotlight
Part #: GL
Price: $500.00
The GL from Larson Electronics is a 1.3 million candlepower, military grade rechargeable spotlight that produces a beam width of 120
feet. The maximum beam distance is 3,600 feet and has a beam angle of 11 degrees. This Golight Profiler Searchlight has been
designed and manufactured according to military specifications.
The GL has a 55 watt Axial Filament halogen bulb that generates an extremely bright, virtually perfect beam of light to eliminate dark spots, cast
a broad spectral pattern and reach distances of up to one mile. It also has a secondary 1 watt LED browsing lamp to conserve power when the
super bright halogen main beam is not needed.
This light has a two position patented swivel handle creating spotlight and lantern functionality. The on/off squeeze button features a locking
trigger switch. The GL also has an LED battery power level indicator gauge to help determine how much battery life is available. This Golight is
powered by a rechargeable Lithium-Ion battery pack. When fully charged, the light will run for 60 minutes in searchlight mode and 50 hours when
using just the LED browsing lamp. This light has a quick two hour charge time. It comes with a docking station charging system that runs on 12
VDC. It also comes with a 115 VAC charger and a 12 V direct run cord.
The GL is made up of a rugged weatherproof construction and has a carbon fiber reinforced housing and an aircraft aluminum parabolic reflector.
It has a high performance, high impact polycarbonate lens and is protected by a shock-proof rubber lens. It also has a cushioned grip handle.
11/20/2014
Page: 55
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
GL Handheld Searchlight
Summary/Certifications
Lamp Type: 55 Watt Halogen
55 Watts
Dimensions: 8" W x 8" Depth x 10" H
12 VDC Operation
Weight: 3.5 Lbs
Meets Marine Standards for Fresh / Saltwater Use.
Total Watts: 55 watts
UV and Weatherproof
Voltage: 12V DC
Lighting Configuration: Spotlight
Beam Dimensions: 650' Long by 120' Wide
Mounting: Handheld
Battery: Rechargeable Lithium Ion
Lamp Color Temperature: 4000 Kelvin
Special Orders- Requirements
Weather Rating: Weatherproof
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
1 Year Limited Warranty
Scroll Down to Purchase-
Links (Click on the below items to view):
- Manual
11/20/2014
Page: 56
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
GL-8120 Golight Profiler 1.3 million candlepower rechargeable spotlight
Part #: GL-8120
Price: $500.00
The GL-8120 from Larson Electronics is a 1.3 million candlepower, military grade rechargeable spotlight that
produces a beam width of 120 feet. The maximum beam distance is 3,600 feet and has a beam angle of 11 degrees.
This Golight Profiler Searchlight has been designed and manufactured according to military specifications.
The GL-8120 has a 55 watt Axial Filament halogen bulb that generates an extremely bright, virtually perfect beam of light to
eliminate dark spots, cast a broad spectral pattern and reach distances of up to one mile. It also has a secondary 1 watt
LED browsing lamp to conserve power when the super bright halogen main beam is not needed.
This light has a two position patented swivel handle creating spotlight and lantern functionality. The on/off squeeze button
features a locking trigger switch. The GL-8120 also has an LED battery power level indicator gauge to help determine how
much battery life is available. This Golight is powered by a rechargeable Lithium-Ion battery pack. When fully charged, the
light will run for 60 minutes in searchlight mode and 50 hours when using just the LED browsing lamp. This light has a quick
two hour charge time. It comes with a docking station charging system that runs on 12 VDC. It also comes with a 115 VAC
charger and a 12 V direct run cord.
The GL-8120 is made up of a rugged weatherproof construction and has a carbon fiber reinforced housing and an aircraft
aluminum parabolic reflector. It has a high performance, high impact polycarbonate lens and is protected by a shock-proof
rubber lens. It also has a cushioned grip handle.
11/20/2014
Page: 57
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
GL-8120 Handheld Searchlight
Summary/Certifications
Lamp Type: 55 Watt Halogen
55 Watts
Dimensions: 8" W x 8" Depth x 10" H
12 VDC Operation
Weight:
Meets Marine Standards for Fresh / Saltwater Use.
3.5 Lbs
Total Watts: 55 watts
UV and Weatherproof
Voltage: 12V DC
Lighting Configuration: Spotlight
Beam Dimensions: 650' Long by 120' Wide
Mounting:Handheld
Battery:Rechargeable Lithium Ion
Lamp Color Temperature: 4000 Kelvin
Special Orders- Requirements
Weather Rating: Weatherproof
Contact us for special requirements
Color: Yellow
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail:
[email protected]
3 Year Limited Warranty
Scroll Down to Purchase-
Links (Click on the below items to view):
- Manual
11/20/2014
Page: 58
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof Rechargeable LED Task Light - Spot/Flood Combo - 8hr. Runtime - Class I, Div. I
Part #: EXP-LED-1XB-9W
Price: $476.00
Made in the USA
The Larson Electronics EXP-LED-1XB-9W rechargeable explosion proof LED light can be used as either an inspection light or a
general area work light, as it enables the operator the ability to change the beam from a long, tight spot beam to shorter, wider flood
beam. The runtime on this rechargeable explosion proof led light is approximately 8 hours using a 4.8 Volt NiMH battery pack and
features 3 high powered LEDs, adjustable beam focus, articulating head and “easy to change” battery packs.
The beam configuration on this explosion proof LED light can be changed from spot to flood in only a few seconds, making this light ideal as an
inspection light or a general area work. The operator can remove a clear lens to reveal the LED lens. With a thumb and forefinger, the operator
can pull the lens out for a longer, narrower spot beam or push it the lens inward for a wide area flood beam. The T3 temperature rating and Class
1, Division 1 and Division 2, Groups C & D rating on this handheld explosion proof LED light qualifies it for locations where flammable gases,
vapors, or liquids are constantly present.
11/20/2014
Page: 59
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Dark Field
EXP-LED-1XB-9W in Spot Mode
EXP-LED-1XB-9W in Flood Mode
Click Photos to Enlarge
Click Photos to Enlarge
Click Photos to Enlarge
EXP-LED-1XB-9W 3 LED Articulating Head
Click Photos to Enlarge
11/20/2014
Page: 60
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Swappable Battery Packs Within the Hazardous Locations Areas:
One of the most interesting features of this explosion proof LED light is the ability to swap battery packs within the hazardous location area. With
most rechargeable explosion proof flashlights or task lights, the operator must first step out of the hazardous location boundaries before he is
able to replace the battery. This particular explosion proof LED light keeps the operator efficient by eliminating the need to leave the work area to
change batteries. When the light has approximately 30 minutes left on the battery, an LED indicator light will start blinking. This blinking feature
will slow as the light reaches shut off point. This particular model comes with 1 battery pack that allows for 8 hours of run time.
This unit comes with a 120VAC charger. The charger must be configured to the 1.8A setting before charging which can be done at the top left
corner of the charger. While charging, the pack has a LED indicator that switches from red to green when charging is complete. The operator
must take caution to not overcharge the battery as this will eventually affect the normal performance and service life of the battery. Although the
battery pack can be swapped out in the hazardous location, the battery itself cannot actually be charged within the hazardous area.
Articulating Head:
This hazardous location LED light is equipped with an adjustable knob that enables the operator to position the head of the LED light. The
operator loosens the knob, positions the LED light head and tightens the knob to hold the position. The power switch is below the adjustment
knob. By pressing the switch until a click is audible, the light will lock into either the ON or OFF position.
Trouble Light Style Hook:
This explosion proof LED light also serves as a task/drop light and comes standard with a top mounted hook for overhead hanging of the light.
The unit also comes standard with a nylon lanyard to avoid accidental dropping/damage to the LED light.
Specifications / Additional Information
EXP-LED-1XB-9W
U.L. Approvals
UL Listing: United States
Class 1, Division 1-2 Groups C, D
Dimensions: H- 13.25 " W- 4-1/2" Depth- 6" Wght- 4.15lbs
Total Watts: 12 watts- 3 Watts per LED
Battery: 4.8V NiMH Battery Pack
Mounting: Hook
Runtime: 8 Hours on full charge
Lamp Type:: LED
Lumens 740
Special Orders- Requirements
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
Click here to view the Explosion Proof Light Design Description
E-mail: [email protected]
Scroll Down to Purchase- Same Day Shipping on This Light!
11/20/2014
Page: 61
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/20/2014
Page: 62
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- Manual
11/20/2014
Page: 63
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
HID Light - 3350 Lumens - Articulating Locking Head - Lantern Style - Rechargeable
Part #: RL-14
Price: $539.95
HID Spotlight RL-14 has a 3350 lumen beam - a powerful focused beam of light that is bright enough to illuminate objects up to 2000 feet
away. The HID Spotlight RL-14 can light up an entire work area; plus navigation LEDs for low-light maneuvering.
Useful for field maintenance, inspection of construction sites and remote equipment, it’s a heavy-duty, rechargeable, completely portable
high intensity search that is applicable for work, farming and military applications.
MAIN BENEFITS OF THIS HID SPOTLIGHT:
1. Spotlight head can be released from the body via rubber locking fasteners. The spotlight head can then be positioned to any angle and
locked via thumb bolt. This includes directly up and directly down positions, making it ideal for elevated work, linesman and military
personnel scanning elevated positions.
2. Replacement batteries are under $50.
3. High Intensity Discharge (HID) lights have no filament to break and last 2000+ hours even in extreme and vibratory environments. Ideal
in any situation, including marine applications
4. Wide spotlight beam projects 2000 feet, but is useful for up close work, since the wide spot beam is nearly 60 feet wide at 50 feet
distance. At 2000 feet, the light beam spans approximately 105 feet.
5. The RL-14 HID spotlight can fix and be charged from existing Streamlight Litebox chargers.
6. Heavy duty on/off toggle switch offers long lasting durability.
7. Nearly 2 hours of run time per 9 hour charge.
8. Assembled in the USA
FEATURES OF THIS HID SPOTLIGHT:
• Deep-dish parabolic reflector produces a long range high intensity focused, 3200 lumen beam
• Optimum peripheral illumination for scene lighting
• Fully articulating head can be aimed precisely at target
• Two White Navigation LEDs - White 5mm LED (x2): 9 Lumens (each), Impervious to shock with a 100,000 hr. lifetime
• 35 Watt H.I.D Xenon lamp: 3350 Lumens
• 2000 hr. min. lifetime bulb
11/20/2014
Page: 64
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
• Runtime: H.I.D. lamp: up to 1.75 hrs, LEDs: 100 hrs.+
• Groove in lamp head for attaching optional covert infrared filter
• Cushioned-grip handle
• Integral D-rings allow attachment of the included shoulder strap
• Elastomeric impact bumper
• High-impact ABS thermoplastic housing and weatherproof construction
• toggle switch
• Zero-maintenance 12V, 7.2Ah sealed lead acid rechargeable up to 500 times
• 10 hour charge to 90% battery capacity with continuous trickle charge to maximize battery capacity
• Serialized for positive identification
• Length: 14.9 in. (38 cm)
• Body Width: 5.1 in. (13 cm)
• Overall Height: 8.8 in. (23 cm)
• Head Diameter: 7.7 in. (20cm)
• Weight with battery: 10.1 lbs (4.6 kg)
• One year limited Warranty
• standard system includes HID Spotlight RL-14, battery, shoulder strap, mounting/charging rack, standard shoulder strap, AC charger
cord and DC charger cord
• Fits existing Streamlight LiteBox® Mounting Racks
11/20/2014
Page: 65
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Manual
- Hi-Res Image 1 - Hi-Res Image 2 -
11/20/2014
Page: 66
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Hi-Res Image 3 - Hi-Res Image 4 - Hi-Res Image 5 - Hi-Res Image 6 - Hi-Res Image 7 - Hi-Res Image 8 - Hi-Res Image 9 - Hi-Res Image 10 -
11/20/2014
Page: 67
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Infrared Lens Filter - Coated Borosilicate - 850nm Cut Off for RL-11 HID Spotlight - LENS ONLY
Part #: RL-11-IRF
Price: $538.00
Made in The USA
Infrared cut-off lens cover for R-11 HID light filters lamp output to allow only infrared light energy to pass. Produces invisible infrared
illumination in the 850nM range which requires the use of night vision devices to be seen.
850 nm cut off infrared lens blocks the projection of all visible light. The borosilicate substrate (commonly known as Pyrex) has the durability of
tempered glass and is coated on both sides. The lens is sealed into the machined aluminum housing. The housing is attached via bracket and
thumb nuts. The lens and lens holder are insulated/sealed with high temperature silicone and high temperature silicone gaskets to prevent light
leakage.
The lens holder assembly can be attached and removed quickly. Once secured, the unit can subjected to excessive vibration without risk of the
lens exposing the visible light. This milspec unit enables 93% of light energy to pass through the filter. Plastic infrared filter lenses usually allow
only 20% of the light energy to pass. This means that the RL-11 HID light will only lose 7% of its 3000 foot beam due to the lens. Other lights
using the plastic lens will lose up to 80% of the transmission length.
The light output produced with the use of this lens is invisible to the naked eye. Night vision cameras, goggles and similar devices are needed to
view the output from this lens.
THIS INFRARED LENS COVER ASSEMBLY IS MADE IN THE USA
Specifications / Additional Information
RL-11-IRF Infrared Lens Filter
Special Orders- Requirements
Use With: R-11 Series Lights
Contact us for special requirements
Wavelength: 850nM
Toll Free: 1-800-369-6671
Materials: Machined Aluminum - Pyrexв„ў Lens
Fax: 1-903-498-3364
Efficiency 93% Light Energy Passage
E-mail: [email protected]
Hardware: Steel Bracket - Thumb Nuts
Specs: Milspec
Scroll Down to Purchase-
Links (Click on the below items to view):
- Dimensional Drawing
11/20/2014
Page: 68
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Manual
- STEP
- DXF
11/20/2014
Page: 69
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Intrinsically Safe LED Trouble Light - Convenient Hanging Hook and Belt Ring - Spot & Flood - Rechar
Part #: EXPRL-96
Price: $440.00
Made in The USA
The EXRPL-96 Explosion Proof-Intrinsically Safe LED Trouble Light is designed to handle the demands of working within hazardous
locations and environments where potentially explosive vapors, gases and other volatile compounds may be encountered.
This intrinsically safe LED trouble light comes with a lifetime warranty and produces a powerful 240 lumen spotlight light beam and 155 lumen in
floodlight mode. This LED trouble light adds extra functionality and utility through the inclusion of an independently operable secondary flood type
beam. The main beam from this compact and lightweight LED trouble light is tightly focused to produce a beam of bright white light capable of
reaching up to 110 feet in length. A secondary flood beam can be operated independently of the main light to produce a 155 lumen flood pattern
of light covering approximately 90 square feet useful for close work and general illumination.
Either beam can be operated alone to produce a 240 lumen spotlight or 155 lumen floodlight beam. This light can also be switched between half
power mode for maximum runtime and full power mode for maximum light output when in floodlight mode. Made in the USA, this explosion proof
LED trouble light offers up to 9 hours battery run time on a 6 hour charge from 12 volt vehicle source and US/International wall outlets. The
EXPRL-96 comes with a quick release charging cradle, ceiling hook and belt ring. This LED trouble light is versatile, rugged and can serve in
industrial, public and commercial applications with ease.
Spot beam at 50 feet
Flood beam at 50 feet
Combination Flood/Spot
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
11/20/2014
Page: 70
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Both the flood and spot beams of this trouble light are actuated via their own momentary or constant on switches. The high intensity LEDs used
in this trouble light can produce a 240 lumen spot beam or a 155 lumen flood beam of light and offer 50,000 hour lifespans. These high efficiency
LEDs produce a 9 hour runtime when operating in flashlight mode and 6 hour runtime when operating in dual-light mode.
The housing is constructed of lightweight and chemical resistant Polycarbonate/ABS alloy that offers non slip grip and high durability. This LED
trouble light is impact and vibration resistant, waterproof to one meter, and comes with an included ceiling hook and belt ring for easy positioning
and carrying convenience. This intrinsically safe trouble light is approved Class 1, 2, 3 Div 1, Class 1, 2, 3, Div 2 and offers users the highest
level of hazardous location protection available while providing the safety and efficiency of brilliant LED illumination.
Charging System:
Versatile configuration works 12 VDC and 100 VAC to 240 VAC at 50/60 HZ - wall outlet plug and vehicle cigarette plug included.
Single quick release cradle can be desk or wall mounted and vehicle mounted with DC connection provided.
Fast charge rate - full charge in 3 hours from fully depleted state - overcharge protection and LED indicators to show battery status.
Energy and function management system assures maximum energy capacity with no risk of over-charge and lower operating cost.
Battery Pack:
Medical grade, rechargeable NiMH.
Full charge every charge with no capacity degradation due to recharge memory.
1000+ recharge cycles.
Earth Friendly NiMH battery does not pollute the environment.
High Quality Construction
Superior LED Benefits
1. High Intensity LEDs
2. Momentary/Constant On Switches
3. Single or Tandem Light Beam Operation
4. Waterproof
5. Chemical/Impact Resistant
6. 9 hour Runtime
7. Intrinsically Safe Approval
8. Wall outlet plug/vehicle cigarette plug included
9. Convenient Belt Ring and Hanging Hook
1. Extreme long life.
2. High efficiency and low amp draw.
3. High durability and reliability.
4. Small size and light weight.
5. 100% recyclable.
6. No toxins-lead, mercury.
7. High light output..
8. Consistent color over time.
9. High Versatility.
10. No fragile glass used in construction.
12. Vibration/impact resistant.
11/20/2014
Page: 71
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
EXPRL-96 Intrinsically Safe
UL Approval
Lamp Type: LED Light Emitting Diode
Class 1, 2, 3 Div 1, 2
Dimensions: Dia-1.75" Length-13.6 "
Groups C,D
Weight: 27 Oz
Explosion Proof/Intrinsically Safe
Power: Rechargeable NiMH Batteries
Waterproof to 1 Meter
Runtime: 9 Hours Flashlight, 6 Hours Dual Light
FCC approved Part 15 and 18
Lumens: 240 Spot Beam-155 Flood Beam-115 Dual Light
No EM interference with communication or acute care medical
electronics
Lamp Life: 50,000 hrs
ATEX Zone 0
Operating Temp Range: 30В°C to +60В°C
Waterproof: Yes- Rated to 1 Meter
Special Orders- Requirements
Contact us for special requirements
Spanish Spec Sheets for Two Way LED Explosion Proof Light
Toll Free: 1-800-369-6671
Explosion Proof Light Design Description
Fax: 1-903-498-3364
E-mail: [email protected]
Same Day Shipping Available! Scroll Down to Purchase- Need a more powerful beam? Click here to see our Explosion Proof HID Flashlights!
11/20/2014
Page: 72
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/20/2014
Page: 73
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- Manual
- Hi-Res Image 1 - Profile view of the EXPRL-96
- Hi-Res Image 2 - Front View of the Flashlight inside the Charger
- Hi-Res Image 3 - Side View of the Flashlight inside the Charger
- Hi-Res Image 4 -EXPRL-96 with the Belt Ring
- Hi-Res Image 5 - EXPRL-96 with the Light Hook
11/20/2014
Page: 74
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Fire Rescue Light - LED Spotlight - 7 Hours Run Time Rechargeable Lithium Ion Battery -Charging Dock
Part #: RUL-10-FR
Price: $376.38
11/20/2014
Page: 75
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in The USA
The RUL-10-FR Explosion Proof Portable Light is Class 1, Division 1 & 2 and Class 2, Division 1 & 2 approved and provides 16 hours of
runtime on a single charge. A high output LED bulb, versatile charging options, lithium ion batteries, and articulating head are only a
few of this lights' features. The durability and power of this rechargeable portable light make it ideal for applications including
emergency services, utility work, hazardous locations and more.
This portable explosion proof lantern is rechargeable and produces a 70,000 candela peak beam intensity reaching over 1,400' in length. This
lightweight unit weighs only 2 pounds and is powered by lithium ion batteries that require no special charging procedures and have no charge
memory issues. Using the latest lithium ion battery technology allows this unit to be recharged regardless of current charge levels, so there is no
need to fully discharge the light before recharging. The battery will hold its charge for 18 months, even when on the shelf. However, the smart
charging technology enables the operator to leave the light on the docking station indefinitely.
The docking station can be placed on a table, mounted to a wall or vehicle mounted. Included is an LED battery status indicator light. The battery
status indicator activates when there is 30 minutes of light remaining. This feature compliments the lithium ion technology by monitoring battery
status, allowing the user to effectively manage their time. The lithium ion battery pack in this unit also helps this unit a achieve a 33% lighter
weight than its competitors, an important consideration for firefighters whose basic equipment can already weigh 65-70 lbs.
Click Photos to Enlarge
Click Photos to Enlarge
The Rul-10-T illuminating the road 500 feet
away.
Road lit by street light
This light is waterproof to provide all weather durability and has an articulated head which allows the user to position the lamp head through 90
degrees of movement for the most convenient handling. The durable housing is constructed of impact resistant nylon and has a rubberized
coating and ribbed handle for added durability and improved grip. The high output LED package in this unit is combined with a high quality
reflector to produce 225 lumen (120,000 candlepower) high beam and 100 lumen low beam. The high powered LED assembly provides a strong
beam that is comparable to the output of more powerful and higher priced flashlights. This unit also includes a pair of flashing red and white
LEDs located on the tail of the unit that can be used as warning or indicator lamps. Control of the RUL-10-EP operating modes is via a three way
toggle switch which allows the main light to be operated alone or in tandem with the flashing tail lights, producing an ideal emergency services or
utility light that can serve in a wide variety of situations.
The Lithium-Ion, 6600mAH, 7.8V batteries in this unit are charged via an included 120 Volt AC wall charger and charging cord that is suitable for
domestic use. Also available is an optional DC charger for 12V DC and 24V DC charging. This unit is charged in approximately 4.5 hours and
11/20/2014
Page: 76
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
has a runtime of 5 hours on a single charge. This light is waterproof and tested to 24 hours of submersion at 1 foot. Also included with this light is
a carrying strap for easy carrying and a choice of black, yellow and orange colors are available. .
Class Ratings include:
Class I, Division 1, Groups C and D - T1 Operating Temperature Rating
Class I, Division 2, Groups A, B, C, D - T5 Operating Temperature Rating
Class II, Division 1, Groups E, F, G - T1 Operating Temperature Rating
Class II, Division 2, Groups E, F, G - T5 Operating Temperature Rating
UL 913
CSA 22.2 No. 157
Intrinsically Safe
Ingress Protection Level IP67 Waterproof
This light is Made in the USA. We offer a country of origin certification that is available upon request. This lamp also comes with a limited lifetime
warranty so you can be assured of quality and service with your purchase of this unit.
High Quality Construction
1. High Power Lamp- 200 Total Lumens.
2. Heavy duty nylon housing with rubberized coating.
3. Single beam or tandem light and flashing tail light operation.
4. Waterproof
5. Chemical and impact resistant housing
6. 7.6 hour Runtime on single charge.
7. Class 1 Div 2, Class 2 Division 2 Approval.
8. Lithium Ion battery pack.
9. 120 VAC Wall outlet charger / Optional 12/24 VDC charger
10. LED Battery status indicator light.
11. 90 Degree articulating head.
Specifications / Additional Information
RUL-9 Hazardous Location Portable Light
UL Approval
Lamp Type: LED
Class I, Division 1, Groups C & D
Dimensions: 9.5"-L 3.125"-Dia 5.125"-H
Class I, Division 2, Groups A, B, C, D
Weight: 2 Lbs.
Class II, Division 1 & 2, Groups E, F, G
Power: Rechargeable Lithium-Ion Batteries
UL 913
Runtime: 8 Hours Hi / 16 Hours Low
CSA 22.2 No. 157
Lumens: 225 Hi / 100 Low
Intrinsically Safe
Candlepower: 120,000 CP
Ingress Protection IP67
Beam Type: Spot
Tested to 1' Submersion @ 24hrs
Operating Temp Code: T1 (Div 1) / T5 (Div 2)
Charging unit: 120 VAC , 12/24 VDC Charger Opt
Special Orders- Requirements
Ambient Temp Rating: -20В°C to +50В°
Contact us for special requirements
Waterproof: Yes- Tested 24 hrs. @ 1 foot
Toll Free: 1-800-369-6671
Fax: 1-903-498-3364
E-mail: [email protected]
Explosion Proof Light Design Description
Scroll Down to Purchase- Need a more powerful beam? Click here to see our Explosion Proof HID Flashlights!
11/20/2014
Page: 77
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/20/2014
Page: 78
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Manual
- Hi Res Image1
- Hi Res Image2
- Hi Res Image3
- Hi Res Image4
- Hi Res Image5
- Hi Res Image6
- Hi Res Image7
11/20/2014
Page: 79
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Hi-Res Image 8 - Hi-Res Image 9 -
11/20/2014
Page: 80
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof LED Light - Rechargeable Lithium Ion Battery - 8 hours run time - RUL-10-EP Lantern
Part #: RUL-10-EP
Price: $376.38
11/20/2014
Page: 81
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in The USA
The RUL-10-EP Explosion Proof Portable LED Light is Class 1 Divisions 1 & 2 and Class 2 Divisions 1 & 2 approved and provides up to
16 hours of runtime on a single charge. A high output LED assembly, versatile charging options, lithium ion batteries, and articulating
head are only a few of this lights' features. The durability and power of this rechargeable portable light make it ideal for applications
including emergency services, utility work, hazardous locations and more.
This portable explosion proof lantern is rechargeable and produces a 70,000 candela peak beam intensity reaching over 1,400' in length. This
lightweight unit weighs only 2 pounds and is powered by lithium ion batteries that require no special charging procedures and have no charge
memory issues. Using the latest lithium ion battery technology allows this unit to be recharged regardless of current charge levels, so there is no
need to fully discharge the light before recharging. The battery will hold its charge for 18 months, even when on the shelf. However, the smart
charging technology enables the operator to leave the light on the docking station indefinitely.
The docking station can be placed on a table, mounted to a wall or vehicle mounted. Included is an LED battery status indicator light. The battery
status indicator activates when there is 30 minutes of light remaining. This feature compliments the lithium ion technology by monitoring battery
status, allowing the user to effectively manage their time. The lithium ion battery pack in this unit also helps this unit a achieve a 33% lighter
weight than its competitors, an important consideration for firefighters whose basic equipment can already weigh 65-70 lbs.
Click Photos to Enlarge
Click Photos to Enlarge
The Rul-10-T illuminating the road 500 feet
away.
Road lit by street light
This light is waterproof to provide all weather durability and has an articulated head which allows the user to position the lamp head through 90
degrees of movement for the most convenient handling. The durable housing is constructed of impact resistant nylon and has a rubberized
coating and ribbed handle for added durability and improved grip. The high output LED package in this unit is combined with a high quality
reflector to produce 225 lumen (120,000 candlepower) high beam and 100 lumen low beam. The high powered LED assembly provides a strong
beam that is comparable to the output of more powerful and higher priced flashlights. This unit also includes a pair of flashing red and white
LEDs located on the tail of the unit that can be used as warning or indicator lamps. Control of the RUL-10-EP operating modes is via a three way
toggle switch which allows the main light to be operated alone or in tandem with the flashing tail lights, producing an ideal emergency services or
utility light that can serve in a wide variety of situations.
The Lithium-Ion, 6600mAH, 7.8V batteries in this unit are charged via an included 120 Volt AC wall charger and charging cord that is suitable for
domestic use. Also available is an optional DC charger for 12V DC and 24V DC charging. This unit is charged in approximately 4.5 hours and
11/20/2014
Page: 82
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
has a runtime of 5 hours on a single charge. This light is waterproof and tested to 24 hours of submersion at 1 foot. Also included with this light is
a carrying strap for easy carrying and a choice of black, yellow and orange colors are available. .
Class Ratings include:
Class I, Division 1, Groups C and D - T1 Operating Temperature Rating
Class I, Division 2, Groups A, B, C, D - T5 Operating Temperature Rating
Class II, Division 1, Groups E, F, G - T1 Operating Temperature Rating
Class II, Division 2, Groups E, F, G - T5 Operating Temperature Rating
UL 913
CSA 22.2 No. 157
Intrinsically Safe
Ingress Protection Level IP67 Waterproof
This light is Made in the USA. We offer a country of origin certification that is available upon request. This lamp also comes with a limited lifetime
warranty so you can be assured of quality and service with your purchase of this unit.
High Quality Construction
1. High Power Lamp- 225 Total Lumens 120,000 candlepower.
2. Heavy duty nylon housing with rubberized coating.
3. Single beam or tandem light and flashing tail light operation.
4. IP67 Waterproof
5. Chemical and impact resistant housing
6. 5 hour Runtime on single charge.
7. Class 1 Division 1&2, Class 2 Division 1&2 Approval.
8. Lithium Ion battery pack.
9. 120 VAC Wall outlet charger / Optional 12/24 VDC charger
10. LED Battery status indicator light.
11. 90 Degree articulating head.
Specifications / Additional Information
RUL-10-EP Hazardous Location Portable Light
UL Approval
Lamp Type: LED
Class I, Division 1, Groups C & D
Dimensions: 9.5"-L 3.125"-Dia 5.125"-H
Class I, Division 2, Groups A, B, C, D
Weight: 2 Lbs.
Class II, Division 1 & 2, Groups E, F, G
Power: Rechargeable Lithium-Ion Batteries
UL 913
Runtime: 8 Hours Hi / 16 Hours Low
CSA 22.2 No. 157
Lumens: 225 Hi / 100 Low
Intrinsically Safe
Candlepower: 120,000 CP
Ingress Protection IP67
Beam Type: Spot
Tested to 1' Submersion @ 24hrs
Operating Temp Code: T1 (Div 1) / T5 (Div 2)
Charging unit: 120 VAC , 12/24 VDC Charger Opt
Special Orders- Requirements
Ambient Temp Rating: -20В°C to +50В°
Contact us for special requirements
Waterproof: Yes- Tested 24 hrs. @ 1 foot
Toll Free: 1-800-369-6671
Fax: 1-903-498-3364
E-mail: [email protected]
Explosion Proof Light Design Description
Scroll Down to Purchase- Need a more powerful beam? Click here to see our Explosion Proof HID Flashlights!
11/20/2014
Page: 83
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/20/2014
Page: 84
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Manual
- Hi-Res Image 1 -javascript:void(0);
- Hi-Res Image 2 - Hi-Res Image 3 - Hi-Res Image 4 - Hi-Res Image 5 - Hi-Res Image 6 - Hi-Res Image 7 -
11/20/2014
Page: 85
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Hi-Res Image 8 - Hi-Res Image 9 -
11/20/2014
Page: 86
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof Light - European Version -5 hr run time lithium ion battery - RUL-9-INTL
Part #: RUL-9-Intl
Price: $349.00
11/20/2014
Page: 87
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in The USA
The RUL-9-Intl Tactical Light is Class 1 Division 2 and Class 2 Division 2 approved and provides 5 hours of runtime on a single charge.
A high output halogen bulb, versatile charging options, lithium ion batteries, and articulating head are only a few of this lights'
features. The durability and power of this tactical design make it ideal for applications including emergency services, law enforcement,
utility work, hazardous locations and more.
This portable hazardous area light is rechargeable and produces 1107 Lux at 25 feet, which puts it on par with the Powerlight 24 watt HID
flashlight. This lightweight unit weighs only 2 pounds and is powered by lithium ion batteries that require no special charging procedures and
have no charge memory issues. Using the latest lithium ion battery technology allows this unit to be recharged regardless of current charge
levels, so there is no need to fully discharge the light before recharging. The battery will hold its charge for 18 months, even when on the shelf.
However, the smart charging technology enables the operator to leave the light on the docking station indefinitely.
Click Photos to Enlarge
Click Photos to Enlarge
The Rul-10-FR illuminating the road 500 feet
Road lit by street light
away.
Included is an LED battery status indicator light. The battery status indicator activates when there is 30 minutes of light remaining. This feature
compliments the lithium ion technology by monitoring battery status, allowing the user to effectively manage their time. The lithium ion battery
pack in this unit also helps this unit a achieve a 33% lighter weight than its competitors, an important consideration for firefighters whose basic
equipment can already weigh 65-70 lbs.
This light is waterproof to provide all weather durability and has an articulated head which allows the user to position the lamp head through 90
degrees of movement for the most convenient handling. The durable housing is constructed of impact resistant nylon and has a rubberized
coating and ribbed handle for added durability and improved grip. The high output 12 watt lamp in this unit is combined with a high quality
reflector to produce 246 lumens (120,000 candlepower) and provides a strong beam that is comparable to the output of more powerful and
higher priced flashlights. This unit also includes a pair of flashing red and white leds located on the tail of the unit that can be used as warning or
indicator lamps. Control of the RUL-9-Intl's operating modes is via a three way toggle switch which allows the main light to be operated alone or
in tandem with the flashing tail lights, producing an ideal emergency services or utility light that can serve in a wide variety of situations.
The Lithium-Ion, 6600mAH, 7.8V batteries in this unit are charged via an included 220/240V AC International Charger with 2 round prong plug..
See our RUL-9A for units suitable for standard U.S. 120 VAC use. Also available is an optional DC charger for 12V DC and 24V DC charging.
This unit is charged in approximately 4.5 hours and has a runtime of 5 hours on a single charge. This light is waterproof and tested to 24 hours of
11/20/2014
Page: 88
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
submersion at 1 foot. The RUL-9 comes complete with a carrying strap for portability and your choice of either Orange or Yellow housing color.
HAZLOC approvals include UL: Class I, Division 2, Groups A, B, C and D, Class II Division 2, Groups F and G - Operating Temp T1 CSA:
Class I, Division 2, Groups A, B, C and D - Operating Temp T1. Meets NFPA 1901-14.1.11.2
This light is Made in the USA and we offer a country of origin certification that is available upon request.
This lamp also comes with a limited lifetime warranty so you can be assured of quality and service with your purchase of this unit.
Narrow corridor street without any illumination.
RUL-9A beam easily reaching 625' in length.
Click Photo to Enlarge
Click Photo to Enlarge
High Quality Construction
1. High Power Lamp- 264 Total Lumens 120,000 candlepower.
2. Heavy duty nylon housing with rubberzied coating.
3. Single beam or tandem light and flashing tail light operation.
4. Waterproof
5. Chemical and impact resistant housing
6. 5 hour Runtime on single charge.
7. Class 1 Div 2, Class 2 Division 2 Approval.
8. Lithium Ion battery pack.
9. 220/240V AC International Round Prong Wall outlet charger / Optional 12/24 VDC charger
10. LED Battery status indicator light.
11. 90 Degree articulating head.
11/20/2014
Page: 89
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RUL-9-Intl Hazardous Location Portable Light
UL Approval
Lamp Type: XENON/HALOGEN
Class I, Division 2, Groups A, B, C, D
Dimensions: 9.5"-L 3.125"-Dia 5.125"-H
Class II, Division 2, Groups F, G
Weight: 2 Lbs
Operating Temp T1
Power: Rechargeable Lithium-Ion Batteries
CSA: Class I, Div 2, Grps A, B, C, D
Runtime: 5 Hours
NFPA 1901-14.1.11.2 (2003)
Lumens: 264 Beam- 120,000 Candlepower
Tested Waterproof to 1'@ 24hrs
Lamp Life: 200 hours
Beam Type: Spot
Operating Temp Code: T1
Waterproof: Yes- Tested 24 hrs @ 1 foot
Charging unit: 220/240V AC International, 12/24 VDC Charger Opt
Special Orders- Requirements
LUX: 1107 Lux at 25 feet
Contact us for special requirements
Housing: Nylon with Rubberized Coating
Toll Free: 1-800-369-6671
Explosion Proof Light Design Description
Fax: 1-903-498-3364
E-mail: [email protected]
Scroll Down to Purchase- Need a more powerful beam? Click here to see our Explosion Proof HID Flashlights!
11/20/2014
Page: 90
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Manual
- Hi Res Image1
- Hi Res Image2
11/20/2014
Page: 91
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Hi Res Image3
- Hi Res Image4
- Hi Res IMage5
- Hi Res Image6
- Hi ResImage7
- Hi Res Image8
- Hi Res Image9
11/20/2014
Page: 92
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Rechargeable Explosion Proof LED - Spot/Flood Combo - Class I, Div. I - ATEX Approved
Part #: XPR-9822E
Price: $276.00
Made in The USA
The XPR-9822E Explosion Proof-Intrinsically Safe LED Flashlight is Atex Certified and designed to handle the demands of working
within hazardous locations and environments where potentially explosive vapors, gases and other flammable compounds may be
encountered.
This intrinsically safe LED flashlight carries a lifetime warranty and produces a powerful 160 lumen spotlight light beam and 200 lumens in
floodlight mode. This LED flashlight adds extra functionality and utility through the inclusion of an independently operable secondary flood type
beam. The main beam from this compact and lightweight LED flashlight is tightly focused to produce a beam of bright white light capable of
reaching up to 90 feet in length. A secondary flood beam can be operated independently of the main light to produce a 200 lumen flood pattern of
light covering approximately 60 square feet useful for close work and general illumination. This unit can also be operated in continuous or
momentary flashing strobe mode.
Either beam can be operated alone to produce a 160 lumen spotlight or 200 lumen floodlight beam, or in combination to produce a total of 360
lumens of light. This light can also be switched between half power mode for maximum runtime and full power mode for maximum light output
when in floodlight mode. Made in the USA, this explosion proof LED flashlight offers up to 16 hours battery run time in strobe mode on a 3 hour
charge from 12 volt vehicle source and US/International wall outlets. The XPR-9822E comes with a quick release charging cradle. This LED
flashlight is versatile, rugged and can serve in industrial, public and commercial applications with ease.
11/20/2014
Page: 93
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
The strobe, flood and spot beams of this flashlight are actuated via their own momentary or constant on switches. The high intensity LEDs used
in this flashlight can produce a 160 lumen spot beam or a 200 lumen flood beam of light or a 360 lumen combination of each and offer 50,000
hour lifespans. These high efficiency LEDs produce a 16 hour runtime when operating in strobe mode, a 6 hour runtime in flashlight mode, and a
5 hour runtime in floodlight mode.
The housing is constructed of lightweight and chemical resistant polymer that offers non slip grip and high durability. This LED flashlight is impact
and vibration resistant and waterproof to one meter. This intrinsicallyy safe flashlight is approved Class 1, 2, 3 Div 1, Class 1, 2, 3, Div 2 and
offers users the highest level of hazardous location protection available while providing the safety and efficiency of brilliant LED illumination.
ATEX Certified:
Category 1 Zone 0 (Above ground locations where flammable gas is always present or for long periods in environments up to ethyl methyl ether
gas groups, where the surface temperature does not exceed 135В° and the ignition temperature is Ignition temp >135В° = 200В°). This correlates to
UL Hazardous Locations Services Class I, Division 1, Groups C/D, T4
Charging System:
Versatile configuration works 12 VDC and 100 VAC to 240 VAC at 50/60 HZ - wall outlet plug and vehicle cigarette plug included.
Single quick release cradle can be desk or wall mounted and vehicle mounted with DC connection provided.
Fast charge rate - full charge in 3 hours from fully depleted state - overcharge protection and LED indicators to show battery status.
Energy and function management system assures maximum energy capacity with no risk of over-charge and lower operating cost.
Battery Pack:
Medical grade, rechargeable NiMH.
Full charge every charge with no capacity degradation due to recharge memory.
1000+ recharge cycles.
Earth Friendly NiMH battery does not pollute the environment.
High Quality Construction
Superior LED Benefits
1. High Intensity LEDs- 360 Total Lumens
2. Momentary/Constant On Switches
1. Extreme long life.
2. High efficiency and low amp draw.
3. Single or Tandem Light Beam Operation
4. Waterproof
3. High durability and reliability.
4. Small size and light weight.
5. Chemical/Impact Resistant
6. 16 hour Runtime
5. 100% recyclable.
6. No toxins-lead, mercury.
7. Intrinsicallyy Safe Approval
8. Wall outlet plug/vehicle cigarette plug included
7. High light output..
8. Consistent color over time.
9. High Versatility.
10. No fragile glass used in construction.
12. Vibration/impact resistant.
11/20/2014
Page: 94
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
XPR-9822E Intrinsicallyy Safe
UL Approval
Lamp Type: LED Light Emitting Diode
Class 1, 2, 3 Div 1, 2
Dimensions: Dia-1.75" Length-13.6 "
Groups C,D
Weight: 28 Oz
Explosion Proof/Intrinsically Safe
Power: Rechargeable NiMH Batteries
Waterproof to 1 Meter
Runtime: 18 hrs High Mode, 9 Hours Low Mode
FCC approved Part 15 and 18
Lumens: 160 Spot Beam- 200 Flood Beam 360 Total Dual Mode
No EM interference with communication or acute care medical
electronics
Lamp Life: 50,000 hrs
ATEX Certified: Category 1 Zone 0
Operating Temp Range: 30В°C to +60В°C
Waterproof: Yes- Rated to 1 Meter
Special Orders- Requirements
Contact us for special requirements
Spanish Spec Sheets for Two Way LED Explosion Proof Light
Toll Free: 1-800-369-6671
Explosion Proof Light Design Description
Fax: 1-903-498-3364
E-mail: [email protected]
Same Day Shipping Available! Scroll Down to Purchase- Need a more powerful beam? Click here to see our Explosion Proof HID Flashlights!
11/20/2014
Page: 95
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/20/2014
Page: 96
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Manual
11/20/2014
Page: 97
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Intrinsically Safe LED Trouble Light - Spot & Flood - Rechargeable 9 Hour Runtime - Hanging Hook
Part #: EXPRL-98
Price: $339.00
Made in The USA
The EXPRL-98 Explosion Proof-Intrinsically Safe LED Trouble Light is designed to handle the demands of working within hazardous
locations and environments where potentially explosive vapors, gases and other volatile compounds may be encountered.
This intrinsically safe LED trouble light comes with a lifetime warranty and produces a powerful 240 lumen spotlight light beam and 155 lumen in
floodlight mode. This LED trouble light adds extra functionality and utility through the inclusion of an independently operable secondary flood type
beam. The main beam from this compact and lightweight LED trouble light is tightly focused to produce a beam of bright white light capable of
reaching up to 110 feet in length. A secondary flood beam can be operated independently of the main light to produce a 155 lumen flood pattern
of light covering approximately 90 square feet useful for close work and general illumination.
Either beam can be operated alone to produce a 240 lumen spotlight or 155 lumen floodlight beam. This light can also be switched between half
power mode for maximum runtime and full power mode for maximum light output when in floodlight mode. Made in the USA, this explosion proof
LED trouble light offers up to 9 hours battery run time on a 6 hour charge from 12 volt vehicle source and US/International wall outlets. The
EXPRL-98 comes with a quick release charging cradle, ceiling hook and belt ring. This LED trouble light is versatile, rugged and can serve in
industrial, public and commercial applications with ease.
Spot beam at 50 feet
Flood beam at 50 feet
Combination Flood/Spot
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
11/20/2014
Page: 98
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Both the flood and spot beams of this trouble light are actuated via their own momentary or constant on switches. The high intensity LEDs used
in this trouble light can produce a 240 lumen spot beam or a 155 lumen flood beam of light and offer 50,000 hour lifespans. These high efficiency
LEDs produce a 9 hour runtime when operating in flashlight mode and 6 hour runtime when operating in dual-light mode.
The housing is constructed of lightweight and chemical resistant Polycarbonate/ABS alloy that offers non slip grip and high durability. This LED
trouble light is impact and vibration resistant, waterproof to one meter, and comes with an included ceiling hook and belt ring for easy positioning
and carrying convenience. This intrinsically safe trouble light is approved Class 1, 2, 3 Div 1, Class 1, 2, 3, Div 2 and offers users the highest
level of hazardous location protection available while providing the safety and efficiency of brilliant LED illumination.
Charging System:
Versatile configuration works 12 VDC and 100 VAC to 240 VAC at 50/60 HZ - wall outlet plug and vehicle cigarette plug included.
Single quick release cradle can be desk or wall mounted and vehicle mounted with DC connection provided.
Fast charge rate - full charge in 3 hours from fully depleted state - overcharge protection and LED indicators to show battery status.
Energy and function management system assures maximum energy capacity with no risk of over-charge and lower operating cost.
Battery Pack:
Medical grade, rechargeable NiMH.
Full charge every charge with no capacity degradation due to recharge memory.
1000+ recharge cycles.
Earth Friendly NiMH battery does not pollute the environment.
High Quality Construction
Superior LED Benefits
1. High Intensity LEDs
2. Momentary/Constant On Switches
3. Single or Tandem Light Beam Operation
4. Waterproof
5. Chemical/Impact Resistant
6. 9 hour Runtime
7. Intrinsically Safe Approval
8. Wall outlet plug/vehicle cigarette plug included
9. Convenient Belt Ring and Hanging Hook
1. Extreme long life.
2. High efficiency and low amp draw.
3. High durability and reliability.
4. Small size and light weight.
5. 100% recyclable.
6. No toxins-lead, mercury.
7. High light output..
8. Consistent color over time.
9. High Versatility.
10. No fragile glass used in construction.
12. Vibration/impact resistant.
11/20/2014
Page: 99
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
EXPRL-98 Intrinsically Safe
UL Approval
Lamp Type: LED Light Emitting Diode
Class 1, 2, 3 Div 1, 2
Dimensions: Dia-1.75" Length-13.6 "
Groups C,D
Weight: 27 Oz
Explosion Proof/Intrinsically Safe
Power: Rechargeable NiMH Batteries
Waterproof to 1 Meter
Runtime: 9 Hours Flashlight, 6 Hours Dual Light
FCC approved Part 15 and 18
Lumens: 240 Spot Beam-155 Flood Beam-115 Dual Light
No EM interference with communication or acute care medical
electronics
Lamp Life: 50,000 hrs
Operating Temp Range: 30В°C to +60В°C
Waterproof: Yes- Rated to 1 Meter
Special Orders- Requirements
Contact us for special requirements
Spanish Spec Sheets for Two Way LED Explosion Proof Light
Toll Free: 1-800-369-6671
Explosion Proof Light Design Description
Fax: 1-903-498-3364
E-mail: [email protected]
Same Day Shipping Available! Scroll Down to Purchase- Need a more powerful beam? Click here to see our Explosion Proof HID Flashlights!
11/20/2014
Page: 100
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/20/2014
Page: 101
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Manual
- Hi-Res Image 1 - Profile view of the EXPRL-98
- Hi-Res Image 2 - Front View of the Flashlight inside the Charger
- Hi-Res Image 3 - Side View of the Flashlight inside the Charger
- Hi-Res Image 4 -EXPRL-98 with the Belt Ring
- Hi-Res Image 5 - EXPRL-98 with the Light Hook
11/20/2014
Page: 102
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof Light - Class 1 Division 2 Light - 5 hour Run Time Li-ion Battery - MADE IN THE USA
Part #: RUL-9-FR
Price: $329.00
11/20/2014
Page: 103
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in The USA
The RUL-9-FR Hazardous Area Portable Light is Class 1 Division 2 and Class 2 Division 2 approved and provides 5 hours of runtime on
a single charge. A high output halogen bulb, versatile charging options, lithium ion batteries, and articulating head are only a few of
this lights' features. The durability and power of this rechargeable portable light make it ideal for applications including emergency
services, utility work, hazardous locations and more.
This portable hazardous area light is rechargeable and produces 1107 Lux at 25 feet, which puts it on par with the Powerlight 24 watt HID
flashlight. This lightweight unit weighs only 2 pounds and is powered by lithium ion batteries that require no special charging procedures and
have no charge memory issues. Using the latest lithium ion battery technology allows this unit to be recharged regardless of current charge
levels, so there is no need to fully discharge the light before recharging. The battery will hold its charge for 18 months, even when on the shelf.
However, the smart charging technology enables the operator to leave the light on the docking station indefinitely. The docking station can be
placed on a table, mounted to a wall or vehicle mounted.
Included is an LED battery status indicator light. The battery status indicator activates when there is 30 minutes of light remaining. This feature
compliments the lithium ion technology by monitoring battery status, allowing the user to effectively manage their time. The lithium ion battery
pack in this unit also helps this unit a achieve a 33% lighter weight than its competitors, an important consideration for firefighters whose basic
equipment can already weigh 65-70 lbs.
This particular unit is available in Yellow or Orange. Select color below when ordering.
Click Photos to Enlarge
Click Photos to Enlarge
The Rul-10-FR illuminating the road 500 feet
away.
Road lit by street light
This light is waterproof to provide all weather durability and has an articulated head which allows the user to position the lamp head through 90
degrees of movement for the most convenient handling. The durable housing is constructed of impact resistant nylon and has a rubberized
coating and ribbed handle for added durability and improved grip. The high output 12 watt lamp in this unit is combined with a high quality
reflector to produce 246 lumens (120,000 candlepower) and provides a strong beam that is comparable to the output of more powerful and
higher priced flashlights. This unit also includes a pair of flashing red and white leds located on the tail of the unit that can be used as warning or
indicator lamps. Control of the RUL-9 operating modes is via a three way toggle switch which allows the main light to be operated alone or in
tandem with the flashing tail lights, producing an ideal emergency services or utility light that can serve in a wide variety of situations.
The Lithium-Ion, 6600mAH, 7.8V batteries in this unit are charged via an included 120 Volt AC wall charger and charging cord that is suitable for
11/20/2014
Page: 104
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
domestic use. Also available is an optional DC charger for 12V DC and 24V DC charging. This unit is charged in approximately 4.5 hours and
has a runtime of 5 hours on a single charge. This light is waterproof and tested to 24 hours of submersion at 1 foot. Also included with this light is
a carrying strap for easy carrying and a choice of black, yellow and orange colors is available. .
HAZLOC approvals include UL: Class I, Division 2, Groups A, B, C and D, Class II Division 2, Groups F and G - Operating Temp T1 CSA: Class
I, Division 2, Groups A, B, C and D - Operating Temp T1. Meets NFPA 1901-14.1.11.2
This light is Made in the USA. We offer a country of origin certification that is available upon request.
This lamp also comes with a limited lifetime warranty so you can be assured of quality and service with your purchase of this unit.
High Quality Construction
1. High Power Lamp- 246 Total Lumens 120,000 candlepower.
2. Heavy duty nylon housing with rubberzied coating.
3. Single beam or tandem light and flashing tail light operation.
4. Waterproof
5. Chemical and impact resistant housing
6. 5 hour Runtime on single charge.
7. Class 1 Div 2, Class 2 Division 2 Approval.
8. Lithium Ion battery pack.
9. 120 VAC Wall outlet charger / Optional 12/24 VDC charger
10. LED Battery status indicator light.
11. 90 Degree articulating head.
Specifications / Additional Information
RUL-9-FR Hazardous Location Portable Light
UL Approval
Lamp Type: XENON/HALOGEN
Class I, Division 2, Groups A, B, C, D
Dimensions: 9.5"-L 3.125"-Dia 5.125"-H
Class II, Division 2, Groups F, G
Weight: 2 Lbs
Operating Temp T1
Power: Rechargeable Lithium-Ion Batteries
CSA: Class I, Div 2, Grps A, B, C, D
Runtime: 5 Hours
NFPA 1901-14.1.11.2 (2003)
Lumens: 246 Beam- 120,000 Candlepower
Tested Waterproof to 1'@ 24hrs
Beam Type: Spot
Operating Temp Code: T1
Waterproof: Yes- Tested 24 hrs @ 1 foot
Charging unit: 120 VAC , 12/24 VDC Charger Opt
Special Orders- Requirements
Contact us for special requirements
Toll Free: 1-800-369-6671
Fax: 1-903-498-3364
Explosion Proof Light Design Description
E-mail: [email protected]
Scroll Down to Purchase- Need a more powerful beam? Click here to see our Explosion Proof HID Flashlights!
11/20/2014
Page: 105
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/20/2014
Page: 106
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Manual
- Hi Res Image1
- Hi Res Image2
- Hi Res Image3
- Hi Res Image4
- Hi Res Image5
- Hi Res Image6
- Hi Res Image7
- Hi Res Image8
- Hi Res Image9
11/20/2014
Page: 107
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Hazardous Area Rechargeable Light w/ Lithium Ion Battery - 5 hours run time - UL Class 1 Div 2
Part #: RUL-9A
Price: $312.41
11/20/2014
Page: 108
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in The USA
The RUL-9A Hazardous Area Portable Light is Class 1 Division 2 and Class 2 Division 2 approved and provides 5 hours of runtime on a
single charge. A high output halogen bulb, versatile charging options, lithium ion batteries, and articulating head are only a few of this
lights' features. The durability and power of this rechargeable portable light make it ideal for applications including emergency
services, utility work, hazardous locations and more.
This portable hazardous area light is rechargeable and produces 1107 Lux at 25 feet, which puts it on par with the Powerlight 24 watt HID
flashlight. This lightweight unit weighs only 2 pounds and is powered by lithium ion batteries that require no special charging procedures and
have no charge memory issues. Using the latest lithium ion battery technology allows this unit to be recharged regardless of current charge
levels, so there is no need to fully discharge the light before recharging. The battery will hold its charge for 18 months, even when on the shelf.
However, the smart charging technology enables the operator to leave the light on the docking station indefinitely.
Click Photos to Enlarge
Click Photos to Enlarge
The Rul-10-FR illuminating the road 500 feet
Road lit by street light
away.
Included is an LED battery status indicator light. The battery status indicator activates when there is 30 minutes of light remaining. This feature
compliments the lithium ion technology by monitoring battery status, allowing the user to effectively manage their time. The lithium ion battery
pack in this unit also helps this unit a achieve a 33% lighter weight than its competitors, an important consideration for firefighters whose basic
equipment can already weigh 65-70 lbs.
This light is waterproof to provide all weather durability and has an articulated head which allows the user to position the lamp head through 90
degrees of movement for the most convenient handling. The durable housing is constructed of impact resistant nylon and has a rubberized
coating and ribbed handle for added durability and improved grip. The high output 12 watt lamp in this unit is combined with a high quality
reflector to produce 246 lumens (120,000 candlepower) and provides a strong beam that is comparable to the output of more powerful and
higher priced flashlights. This unit also includes a pair of flashing red and white leds located on the tail of the unit that can be used as warning or
indicator lamps. Control of the RUL-9A's operating modes is via a three way toggle switch which allows the main light to be operated alone or in
tandem with the flashing tail lights, producing an ideal emergency services or utility light that can serve in a wide variety of situations.
The Lithium-Ion, 6600mAH, 7.8V batteries in this unit are charged via an included 120 Volt AC wall charger and charging cord. See our RUL-9Intl for units suitable for international 220-240 VAC use. Also available is an optional DC charger for 12V DC and 24V DC charging. This unit is
charged in approximately 4.5 hours and has a runtime of 5 hours on a single charge. This light is waterproof and tested to 24 hours of
11/20/2014
Page: 109
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
submersion at 1 foot. Also included with this light is a carrying strap for easy carrying and a choice of black, yellow and orange colors is available.
.
HAZLOC approvals include UL: Class I, Division 2, Groups A, B, C and D, Class II Division 2, Groups F and G - Operating Temp T1 CSA: Class
I, Division 2, Groups A, B, C and D - Operating Temp T1. Meets NFPA 1901-14.1.11.2
This light is Made in the USA and we offer a country of origin certification that is available upon request. This lamp also comes with a limited
lifetime warranty so you can be assured of quality and service with your purchase of this unit.
Narrow corridor street without any illumination.
Click Photo to Enlarge
RUL-9A beam easily reaching 625' in length.
Click Photo to Enlarge
High Quality Construction
1. High Power Lamp- 246 Total Lumens 120,000 candlepower.
2. Heavy duty nylon housing with rubberzied coating.
3. Single beam or tandem light and flashing tail light operation.
4. Waterproof
5. Chemical and impact resistant housing
6. 5 hour Runtime on single charge.
7. Class 1 Div 2, Class 2 Division 2 Approval.
8. Lithium Ion battery pack.
9. 120 VAC Wall outlet charger / Optional 12/24 VDC charger
10. LED Battery status indicator light.
11. 90 Degree articulating head.
11/20/2014
Page: 110
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RUL-9A Hazardous Location Portable Light
UL Approval
Lamp Type: XENON/HALOGEN
Class I, Division 2, Groups A, B, C, D
Dimensions: 9.5"-L 3.125"-Dia 5.125"-H
Class II, Division 2, Groups F, G
Weight: 2 Lbs
Operating Temp T1
Power: Rechargeable Lithium-Ion Batteries
CSA: Class I, Div 2, Grps A, B, C, D
Runtime: 5 Hours
NFPA 1901-14.1.11.2 (2003)
Lumens: 246 Beam- 120,000 Candlepower
Tested Waterproof to 1'@ 24hrs
Beam Type: Spot
Operating Temp Code: T1
Waterproof: Yes- Tested 24 hrs @ 1 foot
Charging unit: 120 VAC, 12/24 VDC Charger Opt
Special Orders- Requirements
LUX: 1107 Lux at 25 feet
Contact us for special requirements
Housing: Nylon with Rubberized Coating
Toll Free: 1-800-369-6671
Explosion Proof Light Design Description
Fax: 1-903-498-3364
E-mail: [email protected]
Scroll Down to Purchase- Need a more powerful beam? Click here to see our Explosion Proof HID Flashlights!
11/20/2014
Page: 111
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Manual
- Hi Res Image1
- Hi Res Image2
11/20/2014
Page: 112
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Hi Res Image3
- Hi Res Image4
- Hi Res Image5
- Hi Res Image6
- Hi Res Image7
- Hi Res Image8
- Hi Res Image9
11/20/2014
Page: 113
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Portable Lithium Ion Battery Pack for Various Larson Electronics Spotlights - 8.8 Amp Hour
Part #: RLI-12
Price: $304.00
The RLI-12 Portable Lithium Ion Battery Pack from Larson Electronics is ideal for powering a wide variety of
Larson Electronics spotlights, LED lights and Golights. This small battery pack is light weight and ideal for users
who wish to make their 12 VDC dependent spotlights fully portable.
This portable lithium ion battery pack provides the long life and easy charging of lithium batteries combined with an 8.8 amp
hour capacity rating. This battery pack comes equipped with a female Deutsche connector, making it plug-n-play
compatibale with virtually all of our 12VDC powered lights that pull less then 8 amps. An IP67 waterproof rated housing
provides protection against water and dampness and a booted on/off switch provides simple power control.
This battery pack provides 12 volts DC with an 8.8 amp hour capacity and can be recharged from a fully discharged state in
only two hours. An included wall charging unit allows users to recharge this unit from any common 110VAC – 240 VAC
50/60hz wall outlet and an optional vehicle charger is available. This rechargeable battery pack will power Golight halogen
for 90 minutes+, Golight HID for 3 hours+, Golight LED for 3 hours+, LEDLB-4ET-M for 9 hours+, and is an ideal
companion accessory for Golights, LED lights and other Larson Electronics DC power lighting products where it is not
convenient to access vehicle or equipment power.
Operators can determine battery run time by dividing watts of the desired light source by 12 and then dividing the result into
8.8. This will give them the run time for that light on this battery pack. Note that lights with an amp rating higher than 8
amps should not be used with this battery pack.
Suggested Applications: Construction sites, hunting, emergency services, highway projects, industrial plants, utility work,
and anywhere a 12 VDC 8 amp portable power source is needed.
11/20/2014
Page: 114
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RLI-12 Portable Lithium Ion Battery Pack
Quick Summary
Rating: 12 VDC,
Lithium Ion Battery Pack
Weight: 3 lbs
8.8 Amp Hour @ 12VDC
Capacity: 8.8 Amp Hour
IP67 Rated
Dimensions: 4" Tall, 5" Long, 3.5" Wide
Battery Type: Lithium Ion / 12 Cells, 2,200ma Per Cell
Wiring: 1/Deutsche Connector
Switch: Booted On/Off
Charging Time: 2 Hours
Charging Unit: 110VAC – 240 VAC 50/60hz Wall Charger
Ratings: IP67
Special Orders- Requirements
Contact us for special requirements
Phone: 1-903-498-3363
Toll Free: 1-800-369-6671
Fax: 1-903-498-3364
E-mail: [email protected]
Scroll Down to Purchase-
11/20/2014
Page: 115
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/20/2014
Page: 116
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Infrared Lens Filter - Coated Borosilicate - 850nm Cut Off for RL-12 HID Spotlight - LENS ONLY
Part #: RL-12-IRF
Price: $269.00
Made in The USA
Infrared cut-off lens cover for RL-12 HID light filters lamp output to allow only infrared light energy to pass. Produces invisible infrared
illumination in the 850nM range which requires the use of night vision devices to be seen.
850 nm cut off infrared lens blocks the projection of all visible light. The borosilicate substrate (commonly known as Pyrex) has the durability of
tempered glass and is coated on both sides. The lens is sealed into the machined aluminum housing. The housing is attached via bracket and
thumb nuts. The lens and lens holder are insulated/sealed with high temperature silicone and high temperature silicone gaskets to prevent light
leakage.
The lens holder assembly can be attached and removed quickly. Once secured, the unit can subjected to excessive vibration without risk of the
lens exposing the visible light. This milspec unit enables 93% of light energy to pass through the filter. Plastic infrared filter lenses usually allow
only 20% of the light energy to pass. This means that the RL-12 HID light will only lose 7% of its 5,500 foot beam due to the lens. Other lights
using the plastic lens will lose up to 80% of the transmission length.
The light output produced with the use of this lens is invisible to the naked eye. Night vision cameras, goggles and similar devices are needed to
view the output from this lens.
THIS INFRARED LENS COVER ASSEMBLY IS MADE IN THE USA
Specifications / Additional Information
RL-12-IRF Infrared Lens Filter
Special Orders- Requirements
Use With: RL-12 Series Lights
Contact us for special requirements
Wavelength: 850NM
Toll Free: 1-800-369-6671
Materials: Machined Aluminum - Pyrexв„ў Lens
Fax: 1-903-498-3364
Efficiency 93% Light Energy Passage
E-mail: [email protected]
Hardware: Steel Bracket - Thumb Nuts
Specs: Milspec
Scroll Down to Purchase-
11/20/2014
Page: 117
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
5 million candlepower rechargeable spotlight with tilting magnetic base - International Version
Part #: RML-8-INTL
Price: $219.00
This lightweight, ultra rugged, ergonomic handheld Larson Electronics spotlight operates on an internal lithium ion battery and can be used
as a spotlight or flood light for 50 minutes of run time. This Larson Electronics spotlight ships with a wall outlet charger. The unique
reflector and lens configuration produces a 900 foot beam in spotlight mode, making it approximately 5 million retail candlepower rating.
Backed by a 3 year warranty and “no tools required” field serviceable capability, our new Larson Electronics handheld spotlight is ideal for
work, security and hunting and spotting. This Larson Electronics RML-8 is equipped with a 100 pound grip magnetic base that allows the
operator to both swivel and tilt the light.
This handheld spotlight was designed for a specific purpose and the materials were chosen for the same purpose. There are many
handheld lights with a similar configuration, however we noticed that quality and durability does not meet the needs of most of our work
oriented and industrial users.
The handle and lamp housing support are made from high impact nylon. The polycarbonate lamp housing is thick and contoured for extra
support. The 16 gauge internal wiring and connectors are simple and well constructed. The industrial grade, tungsten filament bulb is
designed for 1200 hours of life while producing over 5 million candlepower in this configuration. The impact resistant polycarbonate lens is
lightweight, shatter resistant and thermal resistant.
The reflector is uniquely shaped and shallow, capturing and focusing the light efficiently and effectively. Combined with a convex lens and
inset lens positioning, this light optimally and efficiently captures and projects the right amount of light where the operator wants it. The
position of the bulb and the shape of reflector are different than most handheld lighting products. The difference is in how much of the
emitted light is captured and focused. In many ways, light shares the properties of the water. With many spotlights, a great deal of the
light “spills” on the ground around the light source. While a beam continues to project, much of the light “spills” out around the source,
robbing the desired, projected beam of its power. Often times, as much as 50 percent of the light is lost. In the Larson Electronics
11/20/2014
Page: 118
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
spotlight configuration, more than 90 percent of the emitted light is captured and focused. A side benefit of this is a reduction of “casting,”
a phenomenon that occurs when the light “spills” around the light source. Often times, when surrounded by water, snow or other reflective
surfaces, the light spillage will cause “casting” which effectively prevents the human eye from adjusting and seeing the objects at distance
the spotlight was used to see.
The operator can lift the locking tab behind the lamp housing and rotate the lamp head. Rotating the housing enables the operator to
adjust the beam from a wide, soft flood pattern to a tight, spot beam to goes out 900 feet. Continued rotation to the extreme disconnects
the lamp head from the handle assembly, enabling the operator to replace the bulb when necessary.
This ultra-durable handheld spotlight weighs only 18 ounces, which makes it easy to carry and operate. The unit is balanced for ergonomic
comfort and handling. The ergonomic handle is 4.5 inches long, 1.5 inches deep and 5/8 inch thick, making it easy to hold, even in wet,
slipper conditions. The nylon handle has a no-slip textured surface to improve grip as well. The simple rocker switch is conveniently
placed so the user can easily access the switch with their fore finger for quick on/off or even momentary use.
A 3/8-16 inch brass nut fixture is imbedded in the base of the handle enabling the operator to mount a magnetic base, like our MM-2 or
MM-5, to the light. Alternatively, the operator can tripod mount this spotlight as well.
The Larson Electronics spotlight is designed for easy field maintenance. Simple internal connectors are accessed through the snap-in
base at the bottom of the handle. The lamp housing is easily removed to access the bulb and wiring. No tools are required to change any
part of the light, including the bulb. This Larson Electronics is truly field serviceable, without tools under any conditions.
This Larson Electronics spotlight has a lanyard attachment at the top of the handle for users that want to secure the light in the event they
lose their grip.
This rechargeable Larson Electronics RL-85 model includes a rechargeable lithium ion battery. While other models on the market have
sealed lead acid, nickel metal hydride or rechargeable alkaline batteries, we selected lithium ion for three reasons. Lithium ion is lighter
than any other available battery option, which is suitable for our lightweight, ergonomic design. Second, lithium ion batteries do not have
“memory” and you can recharge them fully or partially as time permits. Total recharge time is 2 hours and run time is 50 minutes. Finally,
lithium ion batteries can hold their charge up to 18 months, unlike Nimh or SLA batteries, which usually hold a charge less than 3 months.
This is particularly important for infrequent users who rely on the light for emergency purposes. On a last note, lithium ion batteries offer a
greater number of deep cycle recharges than other battery types, which means longer battery life.
11/20/2014
Page: 119
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
The materials used in the construction of the light are UV, water, impact and chemical resistant.
H3 replacement bulbs are readily available at any automotive store in the US. We do offer a spare tungsten based bulb with a H3 base,
but any H3 bulb will work fine.
Links (Click on the below items to view):
- Manual
11/20/2014
Page: 120
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
RML-8 - 5 Million Candlepower Spotlight Rechargeable Battery & Tilting 100lb Grip Magnetic Base
Part #: RML-8
Price: $192.15
This lightweight, ultra rugged, ergonomic handheld Larson Electronics spotlight operates on an internal lithium ion battery and can be used
as a spotlight or flood light for 50 minutes of run time. This Larson Electronics spotlight ships with a wall outlet charger. The unique
reflector and lens configuration produces a 900 foot beam in spotlight mode, making it approximately 5 million retail candlepower rating.
Backed by a 3 year warranty, our new Larson Electronics handheld spotlight is ideal for work, security and hunting and spotting. This
Larson Electronics RML-8 is equipped with a 100 pound grip magnetic base that allows the operator to both swivel and tilt the light.
This handheld spotlight was designed for a specific purpose and the materials were chosen for the same purpose. There are many
handheld lights with a similar configuration, however we noticed that quality and durability does not meet the needs of most of our work
oriented and industrial users.
The handle and lamp housing support are made from high impact nylon. The polycarbonate lamp housing is thick and contoured for extra
support. The 16 gauge internal wiring and connectors are simple and well constructed. The industrial grade, tungsten filament bulb is
designed for 1200 hours of life while producing over 5 million candlepower in this configuration. The impact resistant polycarbonate lens is
lightweight, shatter resistant and thermal resistant.
The reflector is uniquely shaped and shallow, capturing and focusing the light efficiently and effectively. Combined with a convex lens and
inset lens positioning, this light optimally and efficiently captures and projects the right amount of light where the operator wants it. The
position of the bulb and the shape of reflector are different than most handheld lighting products. The difference is in how much of the
emitted light is captured and focused. In many ways, light shares the properties of the water. With many spotlights, a great deal of the
light “spills” on the ground around the light source. While a beam continues to project, much of the light “spills” out around the source,
robbing the desired, projected beam of its power. Often times, as much as 50 percent of the light is lost. In the Larson Electronics
spotlight configuration, more than 90 percent of the emitted light is captured and focused. A side benefit of this is a reduction of “casting,”
a phenomenon that occurs when the light “spills” around the light source. Often times, when surrounded by water, snow or other reflective
surfaces, the light spillage will cause “casting” which effectively prevents the human eye from adjusting and seeing the objects at distance
the spotlight was used to see.
11/20/2014
Page: 121
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
The operator can lift the locking tab behind the lamp housing and rotate the lamp head. Rotating the housing enables the operator to
adjust the beam from a wide, soft flood pattern to a tight, spot beam to goes out 900 feet. Continued rotation to the extreme disconnects
the lamp head from the handle assembly, enabling the operator to replace the bulb when necessary.
This ultra-durable handheld spotlight weighs only 18 ounces, which makes it easy to carry and operate. The unit is balanced for ergonomic
comfort and handling. The ergonomic handle is 4.5 inches long, 1.5 inches deep and 5/8 inch thick, making it easy to hold, even in wet,
slipper conditions. The nylon handle has a no-slip textured surface to improve grip as well. The booted push button switch is conveniently
placed so the user can easily access the switch with their fore finger for quick on/off or even momentary use.
A 3/8-16 inch brass nut fixture is imbedded in the base of the handle enabling the operator to mount a magnetic base, like our MM-2 or
MM-5, to the light. Alternatively, the operator can tripod mount this spotlight as well.
The Larson Electronics spotlight is designed for easy field maintenance. Simple internal connectors are accessed through the snap-in
base at the bottom of the handle. The lamp housing is easily removed to access the bulb and wiring. No tools are required to change any
part of the light, including the bulb. This Larson Electronics is truly field serviceable, without tools under any conditions.
This Larson Electronics spotlight has a lanyard attachment at the top of the handle for users that want to secure the light in the event they
lose their grip.
This rechargeable Larson Electronics RL-85 model includes a rechargeable lithium ion battery. While other models on the market have
sealed lead acid, nickel metal hydride or rechargeable alkaline batteries, we selected lithium ion for three reasons. Lithium ion is lighter
than any other available battery option, which is suitable for our lightweight, ergonomic design. Second, lithium ion batteries do not have
“memory” and you can recharge them fully or partially as time permits. Total recharge time is 2 hours and run time is 50 minutes. Finally,
lithium ion batteries can hold their charge up to 18 months, unlike Nimh or SLA batteries, which usually hold a charge less than 3 months.
This is particularly important for infrequent users who rely on the light for emergency purposes. On a last note, lithium ion batteries offer a
greater number of deep cycle recharges than other battery types, which means longer battery life.
The materials used in the construction of the light are UV, water, impact and chemical resistant.
H3 replacement bulbs are readily available at any automotive store in the US. We do offer a spare tungsten based bulb with a H3 base,
but any H3 bulb will work fine.
11/20/2014
Page: 122
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Manual
11/20/2014
Page: 123
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Rechargeable Spotlight -220/240 VAC International Version - Lithium Ion Battery - 50 minute run time
Part #: RUL-85-220VAC
Price: $182.00
11/20/2014
Page: 124
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The Larson Electronics RUL-85-220VAC is an extremely rugged and powerful spotlight designed to provide maximum output and
complete portability. This spotlight is fitted with a red hunting lens and produces a light beam capable of reaching over 900 feet in
length. An included rechargeable lithium ion battery pack provides over 50 minutes of runtime and high impact nylon and unbreakable
polycarbonate construction provides light weight operation and extreme durability.
This lightweight, ultra rugged, ergonomic handheld Larson Electronics spotlight operates on an internal lithium ion battery and can be used as a
Spotlight or Floodlight for 50 minutes of run time. This Larson Electronics spotlight ships with a wall outlet charger and either a 5" or 7" lens
diameter. The unique reflector and lens configuration produces a 900 foot beam in spotlight mode, making it approximately 5 million retail
candlepower rating. Backed by a 3 year warranty, our new Larson Electronics handheld spotlight is ideal for work, security and hunting and
spotting. Users can also lift the locking tab behind the lamp housing and rotate the lamp head to adjust the beam configuration. Rotating the
housing adjusts the beam from a wide, soft flood pattern to a tight, spot beam reaching up to 900 feet in length. Continued rotation to the extreme
disconnects the lamp head from the handle assembly, allowing operators to quickly and easily replace the bulb when necessary. This spotlight is
set up to charge on 220/240V international voltage in 50/60 hertz. The unit ships with the standard US plug and the European round 2 prong
adapter.
This handheld spotlight was designed for a specific purpose and the materials were chosen for the same purpose. There are many handheld
lights with a similar configuration, however we noticed that quality and durability does not meet the needs of most of our work oriented and
industrial users. The handle and lamp housing support are made from high impact nylon. The polycarbonate lamp housing is thick and contoured
for extra support. The 16 gauge internal wiring and connectors are simple and well constructed. The industrial grade, tungsten filament bulb is
designed for 1200 hours of life while producing over 5 million candlepower in this configuration. The impact resistant polycarbonate lens is
lightweight, shatter resistant and thermal resistant. Backed by a 3 year warranty, our RUL-85 rechargeable handheld spotlight is ideally suited for
hunting applications and spotting.
“When it comes to hunting predators I want every advantage I can get. I trust my success to Larson Electronics. They are without a doubt the
best spotlight you can find for night hunting.” - Dustin Butler, Team Foxpro
Click Photo to Enlarge
Click Photo to Enlarge
11/20/2014
Click Photo to Enlarge
Page: 125
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
The reflector is uniquely shaped and shallow, capturing and focusing the light efficiently and effectively. Combined with a convex lens and inset
lens positioning, this light optimally and efficiently captures and projects the right amount of light where the operator wants it. The position of the
bulb and the shape of reflector are different than most handheld lighting products. The difference is in how much of the emitted light is captured
and focused. In many ways, light shares the properties of the water. With many spotlights, a great deal of the light “spills” on the ground around
the light source. While a beam continues to project, much of the light “spills” out around the source, robbing the desired, projected beam of its
power. Often times, as much as 50 percent of the light is lost. In the Larson Electronics spotlight configuration, more than 90 percent of the
emitted light is captured and focused. A side benefit of this is a reduction of “casting,” a phenomenon that occurs when the light “spills” around
the light source. Often times, when surrounded by water, snow or other reflective surfaces, the light spillage will cause “casting” which effectively
prevents the human eye from adjusting and seeing the objects at distance the spotlight was used to see.
The operator can lift the locking tab behind the lamp housing and rotate the lamp head. Rotating the housing enables the operator to adjust the
beam from a wide, soft flood pattern to a tight, spot beam to goes out 900 feet. Continued rotation to the extreme disconnects the lamp head
from the handle assembly, enabling the operator to replace the bulb when necessary. A 3/8-16 inch brass nut fixture is imbedded in the base of
the handle enabling the operator to mount a magnetic base, like our MM-2 or MM-5, to the light. Alternatively, the operator can tripod mount this
spotlight as well. This Larson Electronics spotlight has a lanyard attachment at the top of the handle for users that want to secure the light in the
event they lose their grip.
This ultra-durable handheld spotlight weighs only 18 ounces, which makes it easy to carry and operate. The unit is balanced for ergonomic
comfort and handling. The ergonomic handle is 4.5 inches long, 1.5 inches deep and 5/8 inch thick, making it easy to hold, even in wet, slipper
conditions. The nylon handle has a no-slip textured surface to improve grip as well. The booted push button switch is conveniently placed so the
user can easily access the switch with their fore finger for quick on/off or even momentary use.
The materials used in the construction of the light are UV, water, impact and chemical resistant. H3 replacement bulbs are readily available at
any automotive store in the US. We do offer a spare tungsten based bulb with a H3 base, but any H3 bulb will work fine. The RL-85 spotlight is
designed for easy field maintenance. Simple internal connectors are accessed through the snap-in base at the bottom of the handle. The lamp
housing is easily removed to access the bulb and wiring.
This rechargeable Larson Electronics RUL-85 model includes a rechargeable lithium ion battery and standard wall charger. While other models
on the market have sealed lead acid, nickel metal hydride or rechargeable alkaline batteries, we selected lithium ion for three reasons. Lithium
ion is lighter than any other available battery option, which is suitable for our lightweight, ergonomic design. Second, lithium ion batteries do not
have “memory” and you can recharge them fully or partially as time permits. Total recharge time is 2.5 hours and run time is 50 minutes. Finally,
lithium ion batteries can hold their charge up to 18 months, unlike Nimh or SLA batteries, which usually hold a charge less than 3 months. This is
particularly important for infrequent users who rely on the light for emergency purposes. On a last note, lithium ion batteries offer a greater
number of deep cycle recharges than other battery types, which means longer battery life.
We also now offer a 5 inch diameter and a 7 inch diameter lens. Although the difference is not significant, the 5 inch lens produces a tighter spot
beam while the 7 inch lens produces a wider coverage flood pattern.
11/20/2014
Page: 126
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RUL-85-220VAC Spotlight
Features
Lamp Type: Tungsten H3
100 Watt Tungsten H3 Bulb
Dimensions: Handle- 4.5"-L 1.5"-Depth 5/8" W
Lightwieght Ergonomic Design
Weight: 18 Oz
No Tools Field Serviceable
Watts: 100 watts
50 Minute Runtime
Voltage: Rechargeable- 220/240 VAC Wall Outlet Charging Unit
Heavy Duty Nylon/ Polycarbonate Construction
Output: 5 Million Candlepower
Rechargeable Lithium Ion Battery
Lamp Life Expectancy: 1200 Hours
Beam Lux in Spot: 22,800 (Lens), 4,720 (10ft), 1,618 (15ft)
Beam Lux in Flood: 15,170 (Lens), 458 (10ft), 212 (15 ft)
Battery: Lithium Ion
Special Orders- Requirements
Charge Time: 2.5 Hours
Contact us for special requirements
Beam Type: Adjustable, Spot or Flood
Toll Free: 1-800-369-6671
Lens Temp: 148В° F
Intl: 1-903-498-3363
Head Temp: 99В° F
E-mail: [email protected]
3 year warranty replacement on this spotlight. After 30 days, the
customer ships the failed light to Larson Electronics at their expense. If
the failure is a manufacturer defect, we will ship a new replacement to
the customer. If failure occurs within 30 days of receipt, Larson
Electronics will provide a return label via email to the customer. When
the failed light is returned, Larson Electronics will ship a new
replacement.
Scroll Down to Purchase-
11/20/2014
Page: 127
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
NSR-9850
Part #: NSR-9850
Price: $175.00
This LED flashlight incorporates LED and battery technology providing professionals in Law Enforcement, Fire, EMS, Rescue Teams and
Military operations with high quality, reliable hand held illumination.
After hundreds of face-to-face interviews it has been confirmed that public safety professionals were eager for duty and patrol flashlights
with significantly more reliability, utility and above all, enhanced personal safety. Failing bulbs and short run-times were the main safety
concerns. This rechargeable LED Flashlight not only solves those problems but raises the performance bar for duty and patrol flashlights
by including floodlight capability.
This LED flashlight is all LED for maximum reliability and dual-function for maximum utility. Medical grade Nickel Metal Hydride (NiMH)
batteries power the LED flashlight. The battery pack has nearly twice the energy capacity, has no re-charge memory effect and accepts a
fast charge.
The NSR-9850 brings together brilliant white-light LEDs that have an operating life of tens of thousands of hours. They are unaffected by
impact and illuminate the object with no color distortion. The best halogen or krypton bulbs produce a yellow color light that distorts the
appearance of the object being illuminated.
Dual-Mode Multi-Function
*Tight focus 300 Lumens flashlight beam for long reach illumination
*Broad beam 400 Lumens floodlight for wide area illumination
*Activate both for maximum area illumination
*Continuous or momentary flashlight
Ergonomic Design
*Anti-roll tri-lobal case design keeps the flood or flashlight in the work area
*Ability to illuminate around corners reducing vulnerability in high-risk entry situations
Tactile Switches
*Obvious isolation between lighting modes and functions for confident operation while wearing gloves
*High reliability switches for dependability, long life and reliable operation
Rugged Construction for All-Day Use
11/20/2014
Page: 128
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
*Engineered polymer housing with slip resistant checkered body for secure and balanced grip.
*Optical grade, scratch resistant lenses Battery impact protection
*Corrosion resistant alloy hardware
*Water resistant
All LED Light Source
*300 Lumens flashlight
*400 Lumens floodlight
*LED rated at 50,000 hours
Charging System
*Fast charge rate - full charge in 3 hours from fully depleted state
*Versatile configuration 12 VDC, 100 to 240 VAC at 50/60 HZ
*Single cradle for desk or wall mounting or vehicle mount
*Energy and function management system assures maximum energy capacity with no risk of over-charge and lower operating cost
Battery Pack
*Medical grade, rechargeable NiMH
*Full charge every charge with no capacity degradation due to recharge memory
*1000+ recharge cycles
Run-Time
*9 hours to 18 hours depending on mode
Working Environment
*Operating temperature range -30 degrees C to +60 degrees C
*FCC approved Part 15 and 18, no electromagnetic interference with sensitive communication or acute care medical electronics
Physical Dimensions
*Length: 13.6 in.
*Weight: 28.0 oz.
Warranty
*2 year battery and charger Lifetime on LED
11/20/2014
Page: 129
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/20/2014
Page: 130
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/20/2014
Page: 131
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
5 Million Candlepower Handheld Rechargeable Spotlight - 100W Halogen - Spot / Flood - 7" Lens
Part #: RUL-85
Price: $172.00
11/20/2014
Page: 132
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Buy American Compliant
The Larson Electronics RUL-85 is an extremely rugged and powerful spotlight designed to provide maximum output and complete
portability. This spotlight is fitted with an adjustable lens and produces a light beam capable of reaching over 900 feet in length. An
included rechargeable lithium ion battery pack provides over 50 minutes of runtime and high impact nylon and unbreakable
polycarbonate construction provides light weight operation and extreme durability.
This lightweight, ultra rugged, ergonomic handheld Larson Electronics spotlight operates on an internal lithium ion battery and can be used as a
Spotlight or Floodlight for 50 minutes of run time. This Larson Electronics spotlight ships with a wall outlet charger and either a 5" or 7" lens
diameter. The unique reflector and lens configuration produces a 900 foot beam in spotlight mode, making it approximately 5 million retail
candlepower rating. Backed by a 3 year warranty, our new Larson Electronics handheld spotlight is ideal for work, security and hunting and
spotting. Users can also lift the locking tab behind the lamp housing and rotate the lamp head to adjust the beam configuration. Rotating the
housing adjusts the beam from a wide, soft flood pattern to a tight, spot beam reaching up to 900 feet in length. Continued rotation to the extreme
disconnects the lamp head from the handle assembly, allowing operators to quickly and easily replace the bulb when necessary.
This handheld spotlight was designed for a specific purpose and the materials were chosen for the same purpose. There are many handheld
lights with a similar configuration, however we noticed that quality and durability does not meet the needs of most of our work oriented and
industrial users. The handle and lamp housing support are made from high impact nylon. The polycarbonate lamp housing is thick and contoured
for extra support. The 16 gauge internal wiring and connectors are simple and well constructed. The industrial grade, tungsten filament bulb is
designed for 1200 hours of life while producing over 5 million candlepower in this configuration. The impact resistant polycarbonate lens is
lightweight, shatter resistant and thermal resistant. Backed by a 3 year warranty, our RUL-85 rechargeable handheld spotlight is ideally suited for
hunting applications and spotting.
“When it comes to hunting predators I want every advantage I can get. I trust my success to Larson Electronics. They are without a doubt the
best spotlight you can find for night hunting.” - Dustin Butler, Team Foxpro
Click Photo to Enlarge
Click Photo to Enlarge
11/20/2014
Click Photo to Enlarge
Page: 133
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
The reflector is uniquely shaped and shallow, capturing and focusing the light efficiently and effectively. Combined with a convex lens and inset
lens positioning, this light optimally and efficiently captures and projects the right amount of light where the operator wants it. The position of the
bulb and the shape of reflector are different than most handheld lighting products. The difference is in how much of the emitted light is captured
and focused. In many ways, light shares the properties of the water. With many spotlights, a great deal of the light “spills” on the ground around
the light source. While a beam continues to project, much of the light “spills” out around the source, robbing the desired, projected beam of its
power. Often times, as much as 50 percent of the light is lost. In the Larson Electronics spotlight configuration, more than 90 percent of the
emitted light is captured and focused. A side benefit of this is a reduction of “casting,” a phenomenon that occurs when the light “spills” around
the light source. Often times, when surrounded by water, snow or other reflective surfaces, the light spillage will cause “casting” which effectively
prevents the human eye from adjusting and seeing the objects at distance the spotlight was used to see.
The operator can lift the locking tab behind the lamp housing and rotate the lamp head. Rotating the housing enables the operator to adjust the
beam from a wide, soft flood pattern to a tight, spot beam to goes out 900 feet. Continued rotation to the extreme disconnects the lamp head
from the handle assembly, enabling the operator to replace the bulb when necessary. A 3/8-16 inch brass nut fixture is imbedded in the base of
the handle enabling the operator to mount a magnetic base, like our MM-2 or MM-5, to the light. Alternatively, the operator can tripod mount this
spotlight as well. This Larson Electronics spotlight has a lanyard attachment at the top of the handle for users that want to secure the light in the
event they lose their grip.
This ultra-durable handheld spotlight weighs only 18 ounces, which makes it easy to carry and operate. The unit is balanced for ergonomic
comfort and handling. The ergonomic handle is 4.5 inches long, 1.5 inches deep and 5/8 inch thick, making it easy to hold, even in wet, slipper
conditions. The nylon handle has a no-slip textured surface to improve grip as well. The booted push button switch is conveniently placed so the
user can easily access the switch with their fore finger for quick on/off or even momentary use.
The materials used in the construction of the light are UV, water, impact and chemical resistant. H3 replacement bulbs are readily available at
any automotive store in the US. We do offer a spare tungsten based bulb with a H3 base, but any H3 bulb will work fine. The RL-85 spotlight is
designed for easy field maintenance. Simple internal connectors are accessed through the snap-in base at the bottom of the handle. The lamp
housing is easily removed to access the bulb and wiring.
This rechargeable Larson Electronics RUL-85 model includes a rechargeable lithium ion battery and standard wall charger. While other models
on the market have sealed lead acid, nickel metal hydride or rechargeable alkaline batteries, we selected lithium ion for three reasons. Lithium
ion is lighter than any other available battery option, which is suitable for our lightweight, ergonomic design. Second, lithium ion batteries do not
have “memory” and you can recharge them fully or partially as time permits. Total recharge time is 2.5 hours and run time is 50 minutes. Finally,
lithium ion batteries can hold their charge up to 18 months, unlike Nimh or SLA batteries, which usually hold a charge less than 3 months. This is
particularly important for infrequent users who rely on the light for emergency purposes. On a last note, lithium ion batteries offer a greater
number of deep cycle recharges than other battery types, which means longer battery life.
We also now offer a 5 inch diameter and a 7 inch diameter lens. Although the difference is not significant, the 5 inch lens produces a tighter spot
beam while the 7 inch lens produces a wider coverage flood pattern.
11/20/2014
Page: 134
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RUL-85 Spotlight
Features
Lamp Type: Tungsten H3
100 Watt Tungsten H3 Bulb
Dimensions: Handle- 4.5"-L 1.5"-Depth 5/8" W
Lightwieght Ergonomic Design
Weight: 18 Oz
No Tools Field Serviceable
Watts: 100 watts
50 Minute Runtime
Voltage: Rechargeable- 120 VAC Wall Outlet Charging Unit
Heavy Duty Nylon/ Polycarbonate Construction
Output: 5 Million Candlepower
Rechargeable Lithium Ion Battery
Lamp Life Expectancy: 1200 Hours
Beam Lux in Spot: 22,800 (Lens), 4,720 (10ft), 1,618 (15ft)
Beam Lux in Flood: 15,170 (Lens), 458 (10ft), 212 (15 ft)
Battery: Lithium Ion
Special Orders- Requirements
Charge Time: 2.5 Hours
Contact us for special requirements
Beam Type: Adjustable, Spot or Flood
Toll Free: 1-800-369-6671
Lens Temp: 148В° F
Intl: 1-903-498-3363
Head Temp: 99В° F
E-mail: [email protected]
3 year warranty replacement on this spotlight. After 30 days, the
customer ships the failed light to Larson Electronics at their expense. If
the failure is a manufacturer defect, we will ship a new replacement to
the customer. If failure occurs within 30 days of receipt, Larson
Electronics will provide a return label via email to the customer. When
the failed light is returned, Larson Electronics will ship a new
replacement.
Scroll Down to Purchase-
11/20/2014
Page: 135
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- Manual
11/20/2014
Page: 136
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
35W Replacement Bulb for 990X
Part #: 990-SB-35
Price: $170.00
35W Replacement Bulb for 990X
11/20/2014
Page: 137
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/20/2014
Page: 138
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Rechargeable LED Trouble Light / Drop Light with Hook
Part #: HL-LED960
Price: $140.00
The Larson Electronics HL-LED960 rechargeable LED trouble light with hook provides versatile operation through spot and floodlight
capability and can operate for up to 24 hours on a single charge. EPDM rubber over the head and body provides comfortable operation
as well as added protection against dropping, and a rechargeable lithium-ion battery provides long operational life.
This handheld unit operates as a multi-task light which can be switched from a handheld spotlight to a flood light with the click of a three position
rocker switch. This LED trouble light can be conveniently hung above a work space to illuminate an area approximately 25' by 25', or operated in
spotlight mode to be used as a normal flashlight. This unit reaches approximately 25ft in spotlight mode and can last up to 24 hours with a
completely charged battery. This unit covers an area of 15x15 ft in floodlight mode and can last up to 6 hours. The LED spot light contains 6
LEDs and produces 360 lumens, and the LED flood light contains 16 LEDs and produces approximately 960 lumens.
The HL-LED960 Rechargeable LED Trouble Light comes with a wall charger that takes just 4 hours to charge the integral 2200mA lithium ion
battery. The included charger can be operated with 110 volts to 230 volts AC for versatile charging option from a variety of standard currents.
This LED hand lamp is water and dust proof to resist the effects of wet and dusty environments and will withstand operation in temperatures
ranging from -40 to 60 degrees Celsius.
Lamp Features
LED light produces 360 lumens in spotlight mode and 960 in floodlight mode.
Waterproof and dustproof.
50,000 hour LED Lamp
EPDM Rubber coating over body and cap.
Dual operational modes
Integrated hanging hook.
Lithium Ion batteries for long operational life.
Included charging unit.
11/20/2014
Page: 139
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
HL-LED960 Rechargeable LED Trouble Light
Special Orders- Requirements
Operation:Spot or Flood Modes
Contact us for special requirements
Dimensions: L -10.75 " W-2.25" Th-1.5"
Toll Free: 1-800-369-6671
Lumens: 360-Spot 960-Flood
Intl: 1-903-498-3363
Total Watts:N/A
E-mail: [email protected]
Mounting: Aluminum Hook
Lamp Type:: LED
3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at
their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new
replacement.
Scroll Down to Purchase-
11/20/2014
Page: 140
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
11/20/2014
Page: 141
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
11/20/2014
Page: 142
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
990-MB Acro 990X HID Flashlight Magnetic Base
Part #: 990-MB
Price: $88.00
Acro 990 Spotlight Magnetic Base with 150 pounds of magnetic grip. The magnetic base is composed of 2 parts, including the 3.75 inch
diameter magnet and a laser cut, powder coated steel plate. The magnet is attached to the steel plate. 4 screws come with the magnetic
base to attach it to the base of the 990X HID flashlight. The magnetic base attaches to either the battery or vehicle adapter of the Acro
990X HID flashlight.
11/20/2014
Page: 143
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]onelectronics.com
Handheld LED Pistol Grip Spotlight - 12V and/or Battery Powered - 800' Spot Beam - 3 Modes
Part #: HL-LED3M-WPG
Price: $85.50
11/20/2014
Page: 144
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
The HL-LED3M-WPG is a C4 LED technology handheld spotlight that emits 210 lumens on high output and 20 lumens on low output.
The multi-function battery powered LED pistol grip spotlight offers a powerful, bright, white beam that can switch from high, to low, to
strobe modes by simply adjusting the switch located on the side of the handle. In high mode, the unit has a runtime of 8.5 hours, in
low and strobe mode, the unit has a runtime of 120 hours.
The unit is powered by either a 12 volt source plug in cigarette adapter or by 4 'C' alkaline batteries. The 12V plug in allows for illumination
without wasting any of the battery life. Whereas the batteries allow the operator to disconnect the unit from the 12V source whenever needed,
while still producing the same output from the spotlight.
The housing is made of high impact polycarbonate with a rubberized lens ring. The unit weighs approximately 1.6 pounds and at its tallest point,
measures 6.75 inches. The housing is water resistant and can be used outdoors while holding up against strong elements such as snow, rain
and sand storms.
This LED spotlight includes an integrated base and stand for hands-free applications. Operator must pull the tab/base away from the light
housing to utilize the base stand. Simply lay the LED spotlight on it's base and the shape of the spotlight allows it to hold it's place while the base
stand is active.
This first image shows a 53' container with no illumination, completely sealed.
This image shows the LED3M-WPG in spot mode with it's beam focused on the back end of the container.
11/20/2014
Page: 145
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
HL-LED3M-WPG Handheld Spotlight
Lamp Type: LED
Dimensions: 6.75" H
Weight: 21 Ounces
Voltage: 12 Volts
Power: 12V Cigarette Plug or 4 'C' Batteries
Special Orders- Requirements
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
Scroll Down to Purchase-
11/20/2014
Page: 146
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Manual
11/20/2014
Page: 147
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
1XB-CH-KIT
Part #: 1XB-CH-KIT
Price: $54.80
The Larson Electronics charging kit - 1XB-CH-KIT CAN BE USED WITH EITHER THE EXP-LED-1XB-9W rechargeable explosion
proof LED light or the EXP-LED-2XB-9W.
11/20/2014
Page: 148
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Wall Charger for RUL-9 Rechargeable Spotlight With Lithium Ion Battery
Part #: RUL-9-AC
Price: $24.20
Wall charger for the RUL-9 rechargeable handheld spotlight with lithium ion battery. This AC (wall) charger plugs into the docking station
provided with the RUL-9 spotlight.
11/20/2014
Page: 149
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Acro 990 - Tripod Mounting Plate
Part #: 990-TM
Price: $23.00
Acro 990 Tripod Mount is a laser cut, powder coated steel plate that attaches to the bottom of the flashlights' battery or vehicle adapter. 4
screws come with the magnetic base to attach it to the base. This enables the Acro 990 to be attached to a tripod or other stud type
mount.
11/20/2014
Page: 150
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
RUL-9-DC: DC Vehicle Charger for RUL-9 Rechargeable Light
Part #: RUL-9-DCA
Price: $20.00
12 volt DC vehicle charger for rechargeable spotlight with lithium ion battery.
11/20/2014
Page: 151
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Tripod Mounting Plate for 990 Rechargeable Light
Part #: 990-TPP
Price: $19.00
Laser cut steel plate, powder coated black. Designed to attach the 990 or the RL-10 to any tripod.
11/20/2014
Page: 152
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
220V Wall Charger for RUL-9 Rechargeable Spotlight With Lithium Ion Battery
Part #: RUL-9-CH-INTL
Price: $19.00
220V wall charger for the RUL-9 rechargeable handheld spotlight with lithium ion battery. This AC (wall) charger plugs into the docking
station provided with the RUL-9 spotlight.
11/20/2014
Page: 153
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement