Technical data | Product Catalog - Logosol

Product Catalog - Logosol
www.logosol.com
g
o
l
a
t
a
C
t
c
u
d
P ro
2013
Invest in the machines
of the future
W
hen it comes to working with wood, Logosol is your
choice. We develop and sell the machines of the future.
The saw or planer you buy from us today can be easily
upgraded with new modules and new accessories as your business
or interest develops. We have solutions and prices to match most
requirements. And you get job satisfaction into the bargain!
To experience the smell of wood, to fashion a log into
something enduring – this is a fantastic feeling. The refining of
wood is also a rewarding business, whether for your own benefit
or to sell on. We have a wide range of products, culminating in industrial production tools at our top end. Each product is covered
by a peace-of-mind guarantee with generous warranties, expert
support technicians and machines that retain their high value.
We’re not afraid of a bit of sawdust. When you buy a
machine from us you will receive it on two months’ approval.
This means that you get 60 days to try out the product you
have bought. If you change your mind there’s no fuss, no
receipt and no questions asked. All we do is send you a goods
return note. You have to pay the cost of carriage, but perhaps it
is worth it if you want to test the machine for yourself on your
own farm under your own conditions.
Watch films straight off the Internet! You’ll see it first
on Logosol.com. Maybe it’s a new product, or a new film or
offer. Why not add the website to your favourites and sign up
for our newsletter? But naturally we’d be even happier if you
dropped us a line!
You’re always very welcome at Logosol!
Logosol Founder
CONTENT
SAWMILLS | BANDSAW MILLS
LOGOSOL M8 Sawmill NEW!
4
LOGOSOL M5 Sawmill
7
Woodworker’s Mill
8
Saw Units NEW!
10
Feeder for Saw Units
13
Log Moulder for Logosol Sawmill
14
Sawmill Accessories
16
Big Mill System
20
Chain Grinders
26
LM Pro Bandsaw Mill
28
ML26 Bandsaw Mill
30
Bandsaw Blades
32
Automatic Band Grinder
34
Log Moulder for Bandsaw Mills
34
Board Edger C210 NEW!
35
Combi Grinder NEW!
36
PLANERS | JOINERY MACHINES
Logosol PH260
38
Logosol PH360
40
Logosol DH410
42
Logosol SH410 NEW!
44
Logosol SH230
46
Planers Accessories
48
Logosol H410
50
Logosol MH410
52
Dimensioning Saw PS315
54
Logosol MF30
56
MF30 Accessories
58
INDUSTRIAL MACHINES
Logosol LГҐks Frame Saw
60
Stack Cutter PK1500
62
Circular Resaw KS150
63
MISCELLANEOUS
Linus System & Sauno Wood Kiln
65
Log Handling Tools
66
Outdoor Hot Tub Kit
67
Chip Management
68
Electric Equipment
70
Axes etc.
72
Logosol Courses
74
Logosol on the Web
76
1
“
Our customer
are our friends.
The Byström Family
We guarantee you a safe buy
You are warmly welcome to contact us!
WARRA
AR
Y
NT
Webshops available in selected markets, see www.logosol.com
Two-Year Warranty
LO
GOSO
L
Please find your local distributor on the back of this catalog,
at www.logosol.com or call Logosol Sweden +46 (0)611 182 85.
2 YE
This is how you order
Doing business with Logosol is safe. We provide
you a two-year warranty on our machines. The
warranty covers manufacturing defects and problems that have occured during normal use of the
machines, with the exception of consumable items
such as belts, guide bars and chains.
L
D SERV
RL
LO
E
IC
GOSO
Service all over the world
GOSO
L
BACK
LO
Logosol gives you a two months money back guarantee on all machines. This means that when you
have paid for the machine, you have two months
to decide whether the machine suits you. If you
want to return the machine, you only pay for the
return freight. Cutting equipment, planing and
moulding knives and other consumable items are
not included in the money back guarantee.
WO
MONE
TH
Y
2 MON
2 Months Money Back Guarantee
The distributor in your country provides service
on the products. At our headquarters in Sweden
we are prepared to offer Logosol customers our
almost 20 years of experience in designing and
working directly with Logosol equipment. We will
give the consultation in English by phone or e-mail.
Tel: +46 611 18285 e-mail: info@logosol.se
Quality | Userfriendliness | Profitability
Innovation | Design
With LOGOSOL processing
wood becomes fun!
Robert Ebner
STIHLВ® TimbersportsВ® Series
All prices are excl. VAT and delivery.
SAWMILLS
CHAIN & BAND
All prices are excl. VAT and delivery.
LOGOSOL M8 – The
Swedish Portable Sawmill
With the Logosol Sawmill M8 you can quickly produce high-class planks
and boards from your logs, in the length and dimensions of your choice.
The sawmill is simple to use – and easy to own.
If you have not cut timber before, the M8
is the perfect choice. You will quickly get
started and the sawmill is very easy to use.
The first day you will already have produced
a good-sized stack of planks and boards.
Visible scales and the possibility of sawing
in fixed steps make setting quick and
accurate. Everything is clearly described
in the book that comes with every sawmill.
The accuracy is impressive, no matter if you
are sawing boards for panelling or squared
logs for building log houses. The M8 can cut
all sorts of wood both from the forest and the
garden: oak, aspen, juniper, apple tree, cherry
tree, larch. The list goes on.
Strong and rigid frame
The sawmill is built of strong, anodized
aluminium, a material that gives it fantastic
qualities. Besides being forever rustproof and
storable outdoors, it is so strong and rigid
that it can easily take large-diameter logs. At
the same time it is so lightweight that you
can lift and move it by hand. The coating of
the sawmill gives a fine and dirt-repellent
surface, which also prevents snow and ice from
sticking to the sawmill. The sawmill is almost
maintenance free, and it will work when you
need it, for decades.
The log ramps and the log beds with
integrated winches enable you to cut timber
without much effort. The log comes up to
a level that makes it comfortable for you to
secure it on the sawmill. The compact design
4
makes it even easier when the log is to be
turned over, since you then can come close to
the sawmill and have a good working posture.
But another feature that is just as important
for your convenience is that the boards come
at an easily accessible waist level, making
them easy to lift from the sawmill.
In other words, the Logosol Sawmill not only
saves your time, but also spares your back.
Fixed log supports are fitted at an exact angle
to the log beds. The fixed supports save time,
as they never require resetting between the
saw cuts, and you do not have to adjust the log
clamps. This gives you even better accuracy, as
the log that is sawn into boards is supported
from the log bed and up to the topside.
In addition, the design of the sawmill makes
it suitable for sawing in the winter. All
important functions of the sawmill are raised
from the snow cover and the sawdust is thrown
out away from the sawing spot. This is an
important quality in the winter, since sawdust
acts as a reinforcement and makes the snow
hard as stone. When you have finished you can
easily move the sawmill from the spot.
Mobile or stationary production
Many of our customers have their sawmill for
stationary use. You can also take your sawmill
with you and put it up on the spot where the
logs are, in the forest, on your backyard, or
anywhere else.
The Logosol Sawmill is easiest powered by an
ordinary chainsaw. The typical saw unit is a
SAWMILLS & BAND SAWMILLS | Logosol M8
Stihl MS660, which with its seven horsepower
and thin guide bar cuts the timber quickly
and gives a fine and smooth sawn surface.
With such equipment you can saw five metres
a minute from a 15 cm (6”) thick squared log.
The big electric saw unit, Logosol E8000,
with automatic feeding, doubles the speed,
and with the bandsaw you can even saw 15 m/
min (50 ft/min).
But technical data is one thing, working in
practise is another. The timber is not only
to be sawn up; it should also be stacked. In
addition, new logs need to be rolled to the
sawmill and, above all, you need a coffee break
now and then. We who use the sawmill can
from experience say that we produce between
two and four cubic metres (850-1700 board
feet) sawn timber in one working day, and if
you get help from a friend you will produce
even more.
Good timber and a good feeling
You will appreciate the feeling you get by
working with quality timber that you have
sawn yourself. With the Logosol Sawmill M8,
it becomes a pleasure to cut it from your own
trees.
The best thing we can give to you who have
recently become a sawmill owner, is probably
the job satisfaction and pride you will feel
when you have finished your first project. This
is an investment that you will not regret, and
that is part of the warranty!
All prices are excl. VAT and delivery.
All prices are excl. VAT and delivery.
SAWMILLS | Logosol M7
5
THE M8 SAWMILL
Two log-end rests are
included as standard – perfect
measurements until the last
board.
Adapted for all-year use in a
Nordic climate.
A rigid lightweight construction – take the sawmill to the
log.
Accessories: Chainsaw, log
house moulder, bandsaw, etc.
Sawing length for the basic
model is 16 ft.
Durable, dirt-repellent
surface. It never rusts.
Quick setting with
fixed height settings.
N EW
MOD E L
!
Double log
clamps
TECHNICAL DATA
Weight: 62 kg (136 lbs) without saw unit
Length: Standard length is 5,5 m (18 ft)
Width: 0,6 m (25”)
Height: 1,0 m (40”)
Space between the logsupports: 2 m
(79”)
Maximum diameter of logs: 0,9 m (36”)
Maximum length of logs: Standard length
is 5.1 m (17 ft), but the sawmill can be
extended to any length.
Optional equipment: Gas chainsaws, electric chainsaws, guide bars, chains, log house
molders etc.
6
SAWMILLS & BAND SAWMILLS | Logosol M8
Log beds
with winches.
Log ramps are
included as standard.
Quick setup with
adjustable feet.
Complete list M8, see current price list.
4508-000-1000
M8 Without Saw Unit
Easy to carry if you are going
to saw on different sites, e.g. in
the forest.
Reliable and well-tried construction with optimal funcionality.
A complete and fully functional
sawmill at the lowest price on the
market.
You get a lot for the money. All
that you need for sawing up a log
is included.
Complete list M5, see current price list.
4510-720-4055
M5 Without Saw Unit
LOGOSOL M5
The original Logosol Sawmill, fully functional at the best price.
M5 is a developed version of the original Logosol Sawmill, introduced in 1989,
which has now reached its optimal function.
M5 is the most sold model of all Logosol Sawmills, so there is no doubt that it
is a good sawmill.
If you are not going to saw that much, or if
you are going to use the sawmill for log house
moulding, you can save some money by choosing a Logosol M5. It lacks some features that
All prices are excl. VAT and delivery.
“
sm a n
Th e t r u e c r af t
a w in g .
d o e s h is o w n s
the M8 has, however, and it cannot be combined with the accessories that have been specially designed for the M8.
TECHNICAL DATA
Weight: 52 kg without saw unit.
Length: 5.0 m is standard length.
Width: 1.0 m
Distance between log beds: 1.8 m
Log diameter: Up to 60 cm, with the possibility of sawing logs of larger diameters.
Log length: 4.5 meter is standard, but you
can extend the sawmill to any length.
Accessories: Petrol saws, electric saws, guide
bars, chains, log house moulder, etc.
SAWMILLS & BAND SAWMILLS | Logosol M5
M7
7
WOODWORKER’S MILL
New possibilities are opened up for woodworkers.
Around your neighbourhood there are
lots of timber, just waiting to be cut. In
towns and cities park trees are thrown
on the dump, and in the gardens fruit
trees are felled and burned on bonfires.
In the forest there are ash, sycamore,
pines, oak, and other types of trees that
many would class as brushwood, but we
woodworkers value so highly. It would
be a great shame not to take care of
these treasure chests of wooden workpieces.
Logosol’s Woodworker’s Mill is a fantastic tool
that maintains very high quality down to the
last detail. Each component demonstrates selfconfidence. The Woodworker’s Mill, which is
made of an anodized aluminium alloy, weighs
under 50 kg and is completely maintenance-
8
free. Despite its low weight the Woodworker’s
Mill lifts logs that weigh 500 kg, by a wide
safety margin. You can slice up the workpiece,
quarter saw it or cut rough-edged boards. You
can use the mill for edging or resawing, and
you can take diagonal cuts in different directions. There are an abundance of mounts and
accessories that enable you to adapt the Woodworker’s Mill to different purposes. The limitations are few.
Reliable design
The construction is made of the same components as the M8 sawmill. By shortening the
sawing length, you get a very sturdy and easyto-handle frame for preparing woodworking
material or different ways of special sawing.
The sawing length is 2.4 m, but you can easily extend it. Woodworker’s Mill can easily be
SAWMILLS & BAND SAWMILLS | Woodworker’s Mill
upgraded to a M8 Sawmill. In its standard version the sawing length will then be 5.5 m.
Easy to use
The accuracy is impressive. You can produce
everything from 0.5 m thick beams to millimetre thin sheets for making tiny boxes. Logs
are rolled onto the sawmill from a working
height of 55 cm. With the built-in winches
you can single-handed lift the logs up to sawing height. The finished workpieces lie accessible at waist height and are easy to lift off. As
a result, you not only save time, but also spare
your back. The saw runs along a stable guide
rail and gives you good results from the very
start. Visible, plain scales and fixed steps make
the adjusting of the sawmill’s settings both
easy and accurate. This is thoroughly described
in the manual that comes with the sawmill.
All prices are excl. VAT and delivery.
Adjustable feet. Quick set-up.
Perfect squaring. The log clamps press
the project log against long, fixed fences.
The log beds are independently adjustable, thus minimizing wastage of sawing
material. The lifting system has a capacity
of lifting over a tonne.
Visible scales and fixed height settings
make adjustments easy and accurate.
TECHNICAL DATA
Weight: 48 kg without saw unit.
Length: 2.75 m is standard length.
Width: 1.1 m
Distance between log beds: 1.1 m
Log diameter: Up to 60 cm, with the possibility of sawing logs of larger diameters.
Log length: 2.4 meter is standard, but you can extend the sawmill to any length.
Accessories: The same as for the M8 Sawmill.
Complete list Woodworker’s Mill,
see current price list.
4517-000-1000
WWM Without Saw Unit
Differences between Logosol M8, Logosol M5 and Woodworker’s Mill
SAWMILL
M8
WoodworkerВґs Mill
M5
Height adjustment
Self-locking ratchet
Self-locking ratchet
Cotter pin in lifting beam
Length
5.5 m
2.75 m
5m
Log bed
50 cm
50 cm
40 cm
Coating
Fully anodized
Fully anodized
Anodized guide rail
Accessories
All accessories
All accessories
Certain accessories
Adjustment
Easy
Easy
Fairly easy
Appearance
Sturdy and appealing
Sturdy and appealing
Plain
All prices are excl. VAT and delivery.
SAWMILLS & BAND SAWMILLS | Woodworker’s Mill
9
Benefits of the E8 Speed Saw
Optimized for efficient log sawing.
Low noise level.
N EW
MOD E L
!
Tool-less replacement of chain.
Automatic lubrication.
Environmentally friendly and reliable.
Higher efficiency than earlier models.
Compatible with E37 Friction.
Integrated accessories.
Electric Saw – for High-Efficiency Log Sawing
Logosol E8 Speed Saw is a completely
new, electric overall solution with the
focus on the result. A special guide bar
with unique stability gives a more rapid
cut and a finer sawn surface. The work
you do on the Logosol Sawmill becomes
even more efficient, and well thoughtout features simplify replacement of
chain and maintenance.
guide bar, adapted for log sawing. The unique
stability of the guide bar gives a better sawing
result with a straighter kerf and a finer sawn
surface. Since the bar is bigger, the chain
also has to be longer and does not need to be
sharpened as often. The design is optimized
so that the chain always has the right tension
around the whole bar. This relieves the nose
sprocket and reduces the risk of wear.
Quiet and strong
Easier maintenance
With the Logosol E8 Speed Saw you get a
reliable machine where accessories such as
water cooling, sawdust duct, and bare nose
steering are included in the machine. The
new technology gives lower noise level, more
control during sawing, and higher efficiency
from the same motor. During the sawing
operation the lubrication is carried out
automatically. A solenoid valve controls the
oil flow, which is turned off simultaneously
with the saw.
Finer sawn surface
E8 Speed Saw comes with a tapered, special
10
A number of smart features make the E8
model really easy to work with. The chain
can be replaced without tools, and without
removing the guide bar. A transparent sawdust
guard helps the machine stay cleaner during
operation, which also improves the cooling of
the motor. The sawdust ejection is improved
so that the sawdust is thrown out a long way
from the sawmill. Keeping the worksite clean
from sawdust is important, especially during
winter.
Logosol E8 Speed Saw can be equipped
with the automatic feed E37 Friction, which
makes working with the Logosol Sawmill
SAWMILLS & BAND SAWMILLS | Saw Units
more convenient and increases the production
significantly.
TECHNICAL DATA: Electric saws
Rated output:
E4000: 4kW max 8 kW 10,8 hp,
E5000: 5 kW max 10 kW 13,6 hp,
E8 Speed Saw: 8 kW max 16 kW 21,5 hp.
Weight: approx. 35 kg
Chain speed: 22,5 m/sec.
Electrical connection: 3-phase, 400V, 16A
“
r
R emem b er to orde
b a r a n d ch a in !
Complete list Electric Saws,
see current price list.
All prices are excl. VAT and delivery.
Bandsaw with Professional Performance
v
Advantages of
the bandsaw
It saws more than twice
as fast as a chainsaw,
and the kerf is only 2
mm, which can be advantageous when you
are sawing valuable
sorts of wood.
i
th
A
In order to make it lightweight,
the bandsaw has a chassis of
cast aluminium. The wheels
are also made of aluminium,
which gives a low rotational
mass that is easily started and
stopped. The bandsaw runs on
a carriage with ball bearings
which moves along the guide
rail of the Logosol Sawmill.
The saw blade is lubricated
and cooled with water.
ailable w
T
All prices are excl. VAT and delivery.
NG
AU
A Logosol Sawmill with
band saw is a good machine to quickly and easOM
I
ily cut large quantities of
AT I C F E E D
standard timber.
TECHNICAL DATA
The electric motor of 5 kW
Saw
blade
speed: 1800 m/min.
is of the same type as the motor in
Max. sawing width: 350 mm
the electric saw E5000, and it is
Rated output: 5 kW
equipped with double overheating
Electricity supply: 3-phase 400 V 16A
protection. Logosol’s bandsaw comes
Weight: 50 kg
with five 2760x32x1.07 mm blades.
Max. log diameter: 40 cm
The hardened teeth have a pitch of 22
mm.
9999-000-7500
”
BS350 for feeder E37
The combination with a chainsaw
eliminates the two weaknesses of the bandsaw: the
blade’s sensitivity to dirt on
the timber, and its reduced
precision when sawing
thick logs.
Bengt-Olov Byström
SAWMILLS & BAND SAWMILLS | Saw Units
11
Chainsaws – freedom to cut anywhere
Logosol offers Stihls’ range of chainsaws. Here we present the best models
for log sawing. When you buy a chain
saw from Logosol you get an extra year
warranty. Long bars and chains to below
chainsaws are available for fast delivery.
Advantages of the
petrol chainsaw
Stihl MS391
A good choice if you need a chainsaw for the
Timberjig or for cutting firewood. (Incl. 40 cm
bar and chain.)
All chainsaws are easily started due to a decompression valve and ElastoStart (shock-absorbing
starter handle).
WARRA
AR
LO
12
SAWMILLS & BAND SAWMILLS | Saw Units
Y
NT
2 YE
An efficient saw for you who saw a lot of timber, or oversized logs. (Excl. bar and chain.)
Stihl MS391: Bar lengths up to 90 cm.
Cylinder displacement 62 cc. Power 3kW.
Weight: 5.6 kg.
GOSO
L
Stihl MS880
Stihl MS660: Bar lengths up to 90 cm.
Cylinder displacement 92 cc. Weight 7.5 kg.
Power 5kW.
A petrol chainsaw makes you independent of electricity on the working site and,
if you want to, you can cut boards in the
middle of the forest.
Stihl MS660
A reliable and powerful best-seller, perfectly
suited for the Logosol Sawmill.
TECHNICAL DATA: Petrol Chainsaw
Stihl MS880: Bar lengths up to 90 cm.
Cylinder displacement 122 cc. Power 6kW.
Weight 9.9 kg.
OR DE R
DONВґT FORG ET TO
AR D!
CAR R IA GE W ITH GU
SEE PR IC ELIST!
1122-011-3052
Stihl MS660
1124-011-3020
Stihl MS880
1140-011-3020
Stihl MS391
All prices are excl. VAT and delivery.
For electric saws and the Log House Moulder
lable w
vai
i
T
NG
AU
OM
th
A
Powerful Automatic Feeder
AT I C F E E D
I
Integrated
loading ramp.
Support
leg and
adjustable
foot.
In one simple
operation you shift
the feeder from the
electric saw to the log
house moulder.
The electric feeder E37 Friction makes
working with the Logosol Sawmill more
comfortable, and it significantly increases productivity.
One great advantage of the patent pending
friction clutch is that you can regulate the
speed of the saw or the Log House Moulder
by adjusting the feed pressure. When the resistance decreases, the speed is increased; and
when the resistance increases, the speed is decreased. The load on the cutting equipment
All prices are excl. VAT and delivery.
becomes more even since the speed immediately decreases when the chain saws through a
knot or swelling in the log. E37 Friction has
an integrated, stable loading ramp and a support leg, which stabilizes the sawmill. When
connected to an electric feeder the saw brings
the board to the operator on the return.
Compatible with the Log House Moulder
and all of Logosol’s electric saws. The feeder
can without problem be connected to older
machines.
Compatible with all Logosol Sawmills.
Lower price on the electric saw and the moulder in
combination with the E37
6600-000-3015
”
The feeder
significantly
increases
your production.
Bengt-Olov Byström,
Logosol Founder
SAWMILLS & BAND SAWMILLS | Automatic Feeder
13
From log to cabin with Logosol
lable w
vai
i
T
OM
NG
th
AU
Timbering is easy as pie with Logosol’s
Log House Moulder. You can quickly
and easily saw out a beam and shape
both the top and the underside of the
beam without removing the saw or the
moulder from the saw bench. Knives
are available for making beams that are
from 3 to 8 inches thick.
A
Log House Moulder
AT I C F E E D
I
With
knives
for
Logosol’s
planer/
moulders you can also plane or mould.
Planing the inner side of the beams, or moulding purlins and posts has turned out to be an
interesting possibility.
The Log House Moulder is available with
3 or 4 kW motors. Now it is also possible to
run the Log House Moulder with a petrol saw.
Contact us for more information.
The Log House Moulder can be used together
with Logosol’s automatic feeder.
TECHNICAL DATA
Cutter head: 4 knife slots
Width/Diameter: 210 mm/72 mm
Number of revolutions: 7600 rpm.
Max. knife protrusion: 25 mm
Weight: approx. 36 kg
Electricity supply: 3-phase 400 V 16A
Motor: 3 kW, 4 kW or petrol saw
7600-000-0230
Log House Moulder for petrol saw.
“
Logosol timbering course
is a ple asant bre ak in
the ever yday life.
PRODUCE THE SHAPES YOU WANT!
14
”
If you shape the logs with
Logosol’s Log House Moulder the log frame will be completed in a third of the time
it would take if you were
shaping the logs by hand.
SAWMILLS & BAND SAWMILLS | Log House Molder
Tycho Loo,
timberman
All prices are excl. VAT and delivery.
To order your Logosol Sawmill:
1
SELECT A LOGOSOL SAWMILL
All sawmills work with all saws and log house
moulders, and all models can be extended.
Logosol M8: 5.5 m guide rail and self-locking saw
setting.
Logosol M5: 5.0 m guide rail. Tried and tested
technology that has been in use for decades.
2
Logosol M5
SELECT A SAW UNIT
Choose from our powerful electric saws
with blade or chain. If you want, you can
saw and mill timber using a chainsaw in the
forest and an electric unit at home in the
yard, on the same Logosol Sawmill.
3
Logosol M8
Electric Chainsaw
Gas Chainsaw
Bandsaw
Log Moulder
SELECT ACCESSORIES
There’s a wealth of excellent gadgets to
increase the usefulness and capacity of your
sawmill. Choose how long you want your
sawmill to be or whether you want an E37
power drive to run all electrical machines.
4
CALL TO ORDER!
Please find your local distributor on the
back of this catalogue, at www.logosol.
com or call Logosol Sweden +46 (0)611
182 85. If you wish, we can help with your
order and check that you have the right
equipment for what you want to do.
All prices are excl. VAT and delivery.
SAWMILLS | Feeder
15
Equip Your Sawmill with Original
Accessories to meet specific needs
4
Log end support
8 Gauging rod
7 Versatile log fence
with support
1
Log clamp
9
Support leg
with foot
5 Cross
support
Eccentric
Log clamp
2
6 Log ladder
Feeder, see p.13
Mattias’ tips on Equipment
for Efficient Sawing
Log rollers makes rolling the log onto the sawmill
and positioning it correctly even easier.
When sawing long timber, you can adjust your
M8 using a central extension (see page 19). Longer
distances between the log beds simplify log handling
and the precision is even better.
The log turner (see p.66) is a must for every one
that works with timber. An indispensable aid every
time you turn or roll a log!
Mattias Byström,
Product Development Manager
16
SAWMILLS & BAND SAWMILLS | Accessories
All prices are excl. VAT and delivery.
Compatible with M7
(with M4, M5, M6 when knee
connectors are added)
Compatible with M3, M4, M5, M6, M7
1
Compatible with M4, M5, M6, M7, M8
6
Log roller
Log Clamp M8
A good aid when edging boards
and cutting beams that are apt to
tip forward. The clamp can be
disengaged by flipping it backwards.
9999-001-1025
With the log roller the log can be
moved lengthwise on the sawmill.
The log is easily rolled from the
roller to the log bed. The log roller
is mounted on the horizontal beam
in front of the log bed.
9999-000-1420
4
A stable log ladder that is simple
to attach to the sawmill. Once you
have rolled a log up onto one of the
first steps, you can easily manoeuvre
it up the other steps utilising a seesaw motion and its own weight.
4507-001-1302
7
Log End Support
Prevents long workpieces from
sagging. The support can be raised
in steps of 1/4 inch. It is fitted to
the log grip by using the existing
holes. Fits all Logosol Sawmills.
Log Clamp M5
9999-000-1425
Compatible
with M8
4510-720-6103
Compatible with
M4, M5, M6, M7, M8
Versatile Log Fence
The log fence has a support shelf
which is set in steps of 1/4 inch,
just as the log beds of the Logosol
Sawmill. Useful as a lateral support
for short or crooked timber. It also
reduces vibrations when long logs
are sawn.
9999-000-0520
All prices are excl. VAT and delivery.
9
Support Leg
with Foot
A sturdy support
leg for stationary Logosol Sawmills.
Stabilizes the sawmill.
6600-000-3001
4510-720-6104
Compatible with M8
Ramp Mount
For mounting your self-made
log table or log ladder. The ramp
mount is screwed to a 2”5 board,
and is then fitted to the knee connector.
5
A support which can be raised up
to 15 cm above the log bed and
tightened with an eccenter. The log
is securely locked in place. A sturdy
construction made of anodized
aluminium.
Practical accessory for electric saws
and bandsaws. Once the saw is set
on the ramp, it comes to the right
level to be pushed onto the sawmill
rail. Perfect when using a chainsaw
carriage on a Big Mill System.
Compatible with
M4, M5, M6, M7, M8
8
Eccentric Log
Clamp
Loading Ramp
9999-000-0920
Compatible with
M3, M4, M5, M6,
M7, M8
Compatible with
M4, M5, M6
2
Log Ladder
Cross support M8
If you frequently saw logs longer
than 4.5 m, we recommend you to
use the cross support. The variations in board thickness stay within
1 mm when you are sawing long
workpieces. Considerably improves
the quality of the last boards.
4500-070-2000
4507-001-1304
Gauging Rod
The gauging Rod simplifies cutting
for beginners. It is also very helpful when timber blocks are being
sawn. A great addition to the existing scales.
4507-001-1300
“
Light and mobile for the
forest, or adapted for
production in the back
garden? The accessories
make the difference!
SAWMILLS & BAND SAWMILLS | Accessories
17
Log Bed Support
Knee Connector
Makes it possible to equip all the
older models (M4-M6) with the
ramp mount or the log ladder. Fit it
between the horizontal beam and
the short leg by using the existing
holes.
4510-001-1045
Round Sawing
Attachments
Cut up to 16 sides on the logs.
Comes with instructions. Also
compatible with Logosol LM40 and
the Log House moulder.
When really heavy logs are to be
rolled onto the sawmill it can feel
safe to know that the log beds rest
unresiliently against the horizontal
beam.
9999-000-5300
IR thermometer
So that you can have full control on
the temperature of the motor and
the cutting equipment .
9999-000-0015
9999-000-1100
Guide
Rail End Cover
Disengageable
Crank
Nice end cover for the guide rail.
Covers the sharp edges.
A feed crank that can be disengaged. The saw becoms easier to
pull back.
9999-000-0520
9999-000-0007
Bar Nose Steering
Water Cooling
The water is supplied automatically
and regulated by a solenoid valve.
As soon as you start the saw, the
water starts running. When you
stop the saw the solenoid valve
shuts off the water flow. Gives the
bar and the chain longer life.
6605-000-0100
A super-strong, rubber-coated
magnet in an adjustable mount
holds the bar in a firm grip. Compatible with guide bars that are up
to 63 cm long.
Wheel Kit
Makes the manually fed saw go
smoother on the guide rail, and
facilitates the return of the saw.
6605-000-0200
For electric saw
6605-000-0205
For petrol saw
9999-000-0496
Cutting kit 40 cm
A Logosol blade and four chains for
electric saw and MS660.
9999-000-0205
Cutting kit 50 cm
A Logosol blade and four chains for
electric saw and MS660.
9999-000-0210
18
Wire Kit
Suspend the power cable of the
saw unit on a wire. It is both practical and increases the safety. If a
chip extractor is connected to your
saw unit you can also hang up the
hose with the wire kit. 10 m wire.
6605-000-0300
SAWMILLS & BAND SAWMILLS | Accessories
Setting Gauge
It helps you take the first cut at
the correct height. Useful both for
beginners and pros.
9999-000-0006
Sawdust Duct
For connection of a chip extractor
to the electric saw or the log house
moulder. 100 mm connection.
6605-000-0250
For electric saw
7700-001-0001
For Log House Molder
All prices are excl. VAT and delivery.
Extend
Your sawmill!
THE GUIDE RAILS of the M2-M8 sawmills can
easily be extended 0.5 m or 1.0 m at the ends.
The M8 can also be extended 0.5 m in the middle of the sawmill so that the log beds are parted. Not only the guide rail, but also the adjusting
strut and the cross beam are then extended.
To extend the sawmill 2.5 m (M8 2 m) you fit
an additional half sawmill, complete with a log
lifter. For really long logs you can conjoin several
sawmills. The world’s longest plank was sawn on
eight conjoined Logosol sawmills.
All extensions for Logosol Sawmills, see current
pricelist.
You can saw your timber yourself.
We have
demonstrated that this works extremely well and is both profitable and enjoyable. With experience behind us we know that we
can keep our promises.
You are welcome to ring or write to us at any time for advice, to
ensure your sawing experience is as good as ours!
Logosol headoffice: +46 (0)611 182 85, e-mail info@logosol.se
Half Sawmill
Extend your sawmill with half a sawmill. Complete with Guide Rail, legs and log bed. Article
number for M8 (2.75 m).
Logosol sawmills have a long service life. Since
they never rust, we feel that it is important to offer upgrades to keep
your sawmill up-to-date over a very long period, which is both financially and ecologically sustainable.
4507-000-2000
All prices are excl. VAT and delivery.
SAWMILLS & BAND SAWMILLS | Accessories
19
BIG MILL SYSTEM
Extend and suit the sawing equipment to your needs.
Logosol began production of the Logosol Sawmill in 1989. Since then we have delivered tens of thousands of
sawmills to satisfied customers around the world. The first Timberjig was delivered in 1990. This simple but functional equipment is much appreciated by sawyers around the world. Many customers have, however, looked for a
product that is a little more outfitted than the Timberjig, but not quite as extensively equipped as a Logosol Sawmill.
W
e have used our customers’ and our
own experience to develop a system
where the base is a new, improved
Timberjig. A well thought out line of mounts,
guide rails, supports and other accessories,
which are all compatible with the Timberjig, makes it possible to extend and suit the
sawing equipment to your particular needs.
Adaptable
The components are divided into two lines;
one which aims at sawing normal-sized logs,
and one which aims at sawing oversized logs.
Most of the components are the same for the
different systems and can thereby be “re-utilized” for different applications.
We have put together four ready-made
packages that suit different purposes. When
you desire, you can upgrade the packages.
Which package suits your particular needs?
High Quality
On the following pages you will find:
All the aluminium components have been anodized to offer a smooth, hard surface. Some of
the steel components are treated with nitrogen
gas and hardened in oil, which gives the steel
high durability, low friction and the characteristic black colour.
• Big Mill Timberjig
• Big Mill BASIC
• Big Mill LSG
• Big Mill PRO
Worth knowing about Big Mill System
Saw as short logs as possible, and you
will have better precision and the work
becomes easier. The aluminium guide rails
can be conjoined and extended when
required. Guide rail sections are available
in lengths of 0.5 m, 1 m and 2.75 m (see
p.19).
When the guide rail is longer than
4 m, a guide rail prop should be fitted
at the middle of the log. If it is longer
than 7 m, two guide rail props should be
used.
20
The Timberjig and the guide rails of
the Big Mill System can also be used on
the Logosol Sawmill or the Woodworker’s
Mill, if you later want to upgrade your
sawing equipment.
The packages are put together to give
you exactly what you need, but each one
of the components can also be ordered
separately.
You can find more information about
the possibilities of the system, the com-
SAWMILLS & BAND SAWMILLS | Big Mill System
ponents and accessories in the Big Mill
System manual, which is accessible at
www.logosol.com
We have chainsaws, guide bars and
chains that are suited for sawing logs, but
you can also use standard equipment if
you already own a chainsaw with two bar
bolts.
Sawing timber is great fun. The feeling
when holding your first board is hard to
beat!
All prices are excl. VAT and delivery.
All prices are excl. VAT and delivery.
SAWMILLS | Logosol M7
21
BIG MILL Timberjig
The Timberjig saws quickly and accurately for a small investment.
You make your own wooden copies
of the components of Bill Mill Basic,
namely the guide rail and the guide
rail supports. The Timberjig comes with
mounts for making the guide rail and a
detailed manual for the entire Big Mill
System.
Many first-time users of the Timberjig are
amazed that it actually works as a small sawmill. You can produce your own planks and
boards by first sawing a beam and then cutting
it into the desired dimensions. The accuracy
usually lies within plus or minus a couple of
millimetres at the start, but practice makes
perfect. The more you saw the better the precision will be.
The Timberjig is suitable for logs up to 50
cm, but in practice there is no upper limit to
how big logs you can saw. Most chainsaws
with two bar bolts are compatible with
the Timberjig and the Big Mill System.
4900-000-1000
Timberjig (without saw)
1
First Cut: The wooden guide
rail and guide rail holders are
fastened to the log.
22
Components: Timberjig incl. fastener for the chain saw,
screws and brackets for the beams, and instruction book.
Log diameter: Max 60 cm.
2
Second Cut: The guide rail is
nailed to the sawn surface.
SAWMILLS & BAND SAWMILLS | Big Mill System
3
Third Cut: The beam is cut out.
Now, you only use the Timberjig.
4
The Timberjig slices up the
beam into planks and boards.
All prices are excl. VAT and delivery.
BIG MILL Basic
For higher precision and flexibility when choosing how to cut the log.
With Big Mill Basic you can cut logs into
rough-edged boards, or into cants that
can be used for building a log house or
be cut into edged planks or boards.
The Basic package includes a 2.75 m long
guide rail and two guide rail supports made
of steel. The supports can be set at 90 degrees
angles in four exact positions, enabling you to
cut right-angled surfaces. You can adjust the
height quickly and accurately with the help
of scales with fixed steps that facilitate adjustments.
The Basic system offers many possibilities. If the log is to be sawn where it lies, the
mounts can be screwed directly to the log
ends. The equipment can stay mounted on the
log until only the centre of the log remains.
This last part is sawn with the help of the
Timberjig, which is then guided by the sawn
surface of the previous cut. If you want a more
permanent work site, you just fit the mounts
and the guide rail to a “log ladder” that you
build yourself. The project log is easily secured
at a right angle next to the guide rail, which
can be raised or lowered. All instructions are
included in the detailed manual.
This system is suitable for both normal and
oversized logs. Bar lengths up to 90 cm can
be used. When fitting the mounts to the log
ends, the BASIC package is suitable for logs
up to 80 cm in diameter.
CUT LIKE THIS WITH BIG MILL:
Components: Timberjig, Guide rail
supports, guide rail 2.75 m.
Log Diameter: Max. 80 cm
4900-007-1000
Big Mill Basic (without saw)
Tr y the Big Mill
– it´s re ally fun!
All prices are excl. VAT and delivery.
”
Build your own
sawmill with
components from
Logosol. Tip: The
M8’s motorised
saw carriage can be
combined with the Big
Mill components if you want to be
able to crank the saw forward.
SAWMILLS & BAND SAWMILLS | Big Mill System
23
BIG MILL LSG
Two conjoined Timberjigs. Perfect for slicing up large logs.
This is how you do it: First, you fit something straight onto the log, e.g. a ladder or a
wooden constuction. This will guide the first
cut. Then you take the next cut, letting the saw
be guided by the sawn surface of the first cut,
almost like a cheese slicer. Maximum depth of
the cuts is 8 inches, or 20 cm. You can either
cut wide, rough-edged boards, or saw beams
that are then cut into ordinary edged planks
and boards, using one of the Timberjigs.
Provided that the first cut is perfect, the LSG
cuts large logs with very high precision. With
a 90 cm long guide bar, you can take 75 cm
wide cuts.
Components: 2 Timberjigs, 1 LSG kit
with bar nose steering.
Log Diameter: Max. 135 cm
4900-007-3000
Big Mill LSG (without saw)
Main Components and Accessories of the Big Mill System:
Timberjig
Guide Rail
Supports
Fit it to a chainsaw that has
two bar bolts.
The supports are fitted to the
log or a log ramp.
4900-000-1000
24
4900-002-1005
SAWMILLS & BAND SAWMILLS | Big Mill System
Guide Rail 2.75m
The guide rail is mounted on
the guide rail holders. It can
easily be extended to the
desired length.
4507-001-1000
Log Clamp
LSG-kit
LSG-kit with bar nose steering.
4900-003-1200
Holds the log in position
while you are sawing. Ram it
into the log.
4900-001-0400
All prices are excl. VAT and delivery.
BIG MILL PRO
Cut valuable oversized logs professionally.
With Big Mill Pro you can cut
with very high precision. You
take wide, millimetre accurate
through the whole length of the
logs
can
cuts
log.
The system includes a Logosol LSG with its
two Timberjigs, the mounts from Big Mill
Basic, extended arms that hold the two guide
rails on either side of the log, and two extra,
sturdier fixing plates for the log ends.
Due to the guide rails, you can easily take
perfectly guided cuts all the way down to the
centre of the log. After that, you can use the
LSG without guide rails, since you then have
a wide and perfectly plane surface that guides
the cut. You can also continue to use the guide
rails if you rotate the log half a turn and cut it
from the other direction. The guide rails can
be rotated around the log in fixed 90 degree
steps. Raising and lowering is also done in
fixed, accurate steps. This enables you to saw
edged boards, if desired. The double guide
rails can also be fitted together so that you can
cut twice the length with the Timberjig. In
brief, almost everything is possible with the
PRO package.
4900-007-2000
Guide Rail Prop
Should be used when the
guide rail is longer than 3 m.
9999-000-1026
Big Mill PRO (without saw)
IMPORTANT: When placing
your order, state which guide bar
length you are going to use on
your LSG, 90 or 120 cm, in order
to get the correct length on the
arms for the guide rails.
Components: 2 Timberjigs, 2 guide rails 2.75 m, 2 guide rail supports, 1 LSG kit, 2 Arm
EXT 90 cm or 120 cm. Log Diameter: 135 cm, with guide rail steering 105 cm.
Fixing Plate EXT
Stronger mounting of the
guid rail supports. (Excl. Arm
EXT)
4900-003-0100
All prices are excl. VAT and delivery.
Arm EXT
Rod Extensions
For logs with larger diameter
than 80 cm or for Big Mill PRO.
Extend the vertical span. For
oversized timber.
4900-003-0090
4900-003-1020
Rack & T-bar Kit
Additional guide rail supports
for arm EXT. For Big Mill PRO
application.
4900-002-1000
SAWMILLS & BAND SAWMILLS | Big Mill System
25
It sharpens ten
teeth per minute.
Sharpening one
side of the chain
takes approx.
1.5 min.
Both the topplate angle and
the side-plate
angle are adjustable. It sharpens
cross-cutting
chains as well as
ripping chains.
“
The sharpening robot
assures you a perfect
sawing surface!”
9999-000-1515
LOGOSOL SHARPENING ROBOT
A completely new automatic chain sharpening machine.
The sharpening robot revolutionizes
the work with chainsaw mills, and you
get the luxury of always having a perfect chain on your chainsaw. If you want
to, you can even take upon yourself to
sharpen your neighbours’ chains.
Besides sharpening automatically, it also sharpens the chain amazingly well. Without having
any scientific evidence, we can state that the
edges of the cutting teeth feel sharper than on
a new chain, and this is clearly noticeable when
you are sawing. It can sharpen both 1.3 Picco
chains and ordinary 1.6-3/8” chains or 0.325
chains. Both the top-plate angle and the sideplate angle are adjustable, so it sharpens ripping
chains as well as cross-cutting chains.
The machine sharpens one side of the chain
at a time. This means that after a while you
have to reset the angle of the sharpening head
26
and move the chain one tooth forward to
sharpen the other side of the chain. It sharpens
ten teeth per minute. Sharpening one chain
takes approx. 1.5 minute per side. Starting
and resetting the sharpening head take about
half a minute.
Every Logosol Sawmill owner knows that
you should sharpen the chain frequently, but
only file off a little, just so that the teeth get
their sharpness back. This is, of course, no
problem for the sharpening robot. What is
more impressive is that it can easily fix a chain
that has been damaged by nails in the timber.
Regardless of how much take-off you choose, it
will not burn the teeth.
When sawing, you do not always have access to electricity. Due to the fact that the robot is powered by 12 V you can run it with a
car battery. One battery is enough to sharpen
several hundred chains. You can also run it
SAWMILLS & BAND SAWMILLS | Sharpening Machines
with a starting aid for cars, which you can get
cheaply. An ordinary battery charger is also an
option. The sharpener comes with a detachable
power cable with strong clamps.
The best is if the chain has an even number of
teeth, i.e. just as many right teeth as left teeth.
The number of links is then exactly divisible
by four. In that case you can let the chain run a
couple of turns on each side. Every turn makes
the chain sharper until the grinding disc does
not touch the teeth any more. If the chain has
an odd number of teeth, or if you only want
to grind the chain one turn anyway, you fit a
small clamp on the chain, which automatically interrupts the sharpening process after
one turn.
We who work at Logosol think that this is
very good. This is a machine that will significantly facilitate the work for all Logosol Sawmill owners.
All prices are excl. VAT and delivery.
Sharpening kit 1
Sharpening kit 2
An excellent bench-top mini-grinder for saw
chains. Easy to use for effective and accurate
sharpening. Complete with round file, depth
gauge and depth file. 220 V, 85 W. 4800 rpm.
A professional machine for you that sets high
standards. Rapid and accurate sharpening of all
chain types. Complete with round file, depth
gauge and depth file. 220 V, 180 W. 2800 rpm.
9999-000-0215
”
9999-000-0220
Grind the chains so that the top-plate angle is 10В°
Mattias Byström,
and the side-plate angle is about 60В°.
product manager
File in time
9999-000-0450
UKF edge file
9999-000-0451
File blade for UKF edge file
9999-000-0620
FIling vice 39 cm
All prices are excl. VAT and delivery.
Sharpen it comfortably!
It is always easier if you have a
comfortable working place. Fasten
the guide bar with a clamp when
sharpening, and use a filing vice if you
have an electric saw and are sharpening manually.
Don’t forget to change
sprocket!
The best is if you alternate between
four chains using the same sprocket.
When the chains are worn out, you
change the entire set including the
sprocket.
Pferd file holder works well
when you are sawing unseasoned
logs that are no thicker than 40 cm.
Logosol recommends that you also use a
4.8 mm round file for Picco chains.
Sharpen before it gets dull!
Sawing with a dull chain puts a lot of
stress on the cutting equipment. It is
important to sharpen the chain before
it gets dull.
Blade sharpener
A bench-top grinder with belt, grinding wheel
and stable blade support. For maintaining guide
bars.
File the bar with a UKF edge file
If the chain has been damaged the
guide bar can get unevenly worn. File
the bar rails equally high with a UKF
edge file.
7804-000-0005
SAWMILLS & BAND SAWMILLS | Sharpening Machines and Filing Equipment
27
BAND SAWMILL
with professional capacity
Logosol Norwood LM Pro, known as the LumberMate Pro in North America,
is an entirely new sawmill that has all the advantages you would otherwise
find in a significantly larger and more expensive band sawmill. This mill delivers what you expect from it, and gets the job done quietly and efficiently.
T
he band wheels are cast in steel, and they
are large- 20.5” (520 mm). The track
where the blade runs is coated with an
extremely tolerant plastic material that reduces
noise level and blade wear, thanks to the fact
that it repels debris. The blade guide is also
uncompromising. The blade is led through
the log by double sets of ceramic blocks above,
below and behind the blade, which is standard
today on industrial band sawmills. The wheel
and blade guide make the band sawmill able
to work effectively while avoiding excessive
stress. The result is a band sawmill that cuts
more precisely at a greater speed.
High capacity expands the possibilities
The LM Pro saws through the thickest logs
without difficulty. The band sawmill can handle logs up to 33.5”(85 cm) thick. This means
that those unmanageable pieces of wood suddenly turn into perfect cutting timber. Impressive tabletops up to 27.6” (70 cm) wide can be
cut in one piece thanks to the large band opening and the precise blade guides. As you would
expect, both the petrol and electric models of
the LM Pro are equipped with automatic water cooling, making board cutting easier than
ever. Both variations are also equipped with
a saw brake that quickly stops the saw band
after every cut. This not only increases safety,
but also boosts capacity since you can now return the saw head more quickly. The saw head
28
SAWMILLS & BAND SAWMILLS | LM Pro
is self-locking vertically. Taken together with
the other fine-tuning controls of the saw, this
makes it very easy to cut a board. Set the saw
height; saw, return. That’s all it takes.
Reliable rail construction
The broad self-bearing rail is designed to be
more than able to manage the weight of the
enormous logs that the band sawmill can tackle.
7/32” (5.5 mm) plates are form-pressed under
400 tons of pressure to optimise the torsional
stiffness of the construction. This produces a
rail that is lightweight but strong and capable
of remaining as straight as an arrow even under the largest logs. The LM Pro band sawmill,
with its stable saw trolley, saws very quickly
compared with other band sawmills of the same
size. Powerful motor alternatives are naturally
part of the reason behind this, but that is not
the whole secret. In order for the band to be able
to saw smoothly and without energy losses, the
bandsaw wheel and blade guide must be rigidly mounted. The LM Pro’s saw trolley is very
powerfully dimensioned, with four steel wheels
positioned at a wide distance from one another.
This provides effective steadiness for the blade.
Innovative electrical operation
The LM Pro E-Twin (LM Pro Electrical Version) is started by the push of a button, and its
power is impressive. The first motor accelerates the band from rest to 68 mph (110 km/h)
in one second, then the second motor turns on
automatically, and the motor package is ready
to deliver at full power. 10.7HP(8 kW) is sufficient for most jobs, but there is also a 16
HP(12 kW) configuration. Both options can
be started and run on a 50-amp electrical supply.
...and innovative electric feed
Logosol’s patented E-37 friction feeder has
now been adapted for the LM Pro. You can
control both the saw motors and the feeder
unit from the control panel located and the
end of the powerful guide rail. Feed pressure
is adjustable and feed rate is automatically
adjusted to resistance. This provides comfortable sawing that maximizes sawing speed. The
board is lifted from the block by a smart pair
of brackets when the saw is reversed, and then
sits in a nice stack next to you - you hardly
even have to budge. It’s almost too good.
Quiet cutting
What you’ll notice the first time you use your
Logosol LM Pro is the sound. This is a band
sawmill that runs quietly and without vibration. The petrol-driven variety with its securely rolling four-stroke engine, is friendlier
to both you and your environment. And if you
have the E-twin, you’ll naturally hear nothing
at all from the electric motors. There is only
the slight whine of the blade. Add to this the
sound of hungry saw teeth.
LOGOSOL NORWOOD LMPRO
Blade guide with ceramic blocks
for ultimate precision.
Can handle logs up to 85 cm
thick.
The large band opening
and precise blade guides
mean that there is no problem
in sawing widths of 70 cm.
Extra stable rail design.
Innovative electrical
operation. Pre-configured for
automatic feed.
Patented electrical
supply.
Quiet saw operation to enhance your
working environment.
Self-locking saw dimension adjustment.
8030-000-0020
LMPro E-Twin 8kW
For the full list for LM Pro,
see current price list.
All prices are excl. VAT and delivery.
TECHNICAL DATA: LMPro
Effective saw length (Standard): 5.10 m. May
be extended by 1.20 m sections or by means of
a 0.60 m attachable extension at each end.
Max. log diameter: 85 cm
Block width: 70 cm
Final board: approx. 25 mm
Saw blade (see also p. 32): 1 included.
Håkansson: Width: 1¼” (32 mm) Thickness:
1.1 mm. Pitch: 22 mm Band length: 4.246 m
Band wheel: 51.4 cm x 2.2 cm. Coated with
Polyurethane. Double sealed ball bearings.
Design: It is designed from 5.5 mm thick galvanised steel which is formed under 400 tonne
pressure, thus ensuring strength and rigidity.
The result is a lightweight but extremely stable
design, which will not deform even under
extreme stress.
Standard length: 6.28 m
Width: 2.0 m
Weight: From approx. 600 kg, depending on
motor option and accessories.
SAWMILLS & BAND SAWMILLS | LM Pro
29
LOGOSOL NORWOOD ML26
An excellent garden sawmill for those who prefer a bandsaw to a chainsaw. This sawmill can handle timber up to 65 cm. Choose
between an electric motor of 4 or 8 kW or run it with a petrol motor if you don’t want to be dependent on electricity supply. Tried and
tested technology and a stable design make the Logosol Norwood ML26 a functional sawmill that does an excellent job! The Log house
moulder on page 33 is compatible with ML26.
65 cm thick logs can be handled
Stable rail structure
The saw head is guided by 4 wheels with
double ball bearings
Self-locking saw height setting
Blade guides with steel wheels on bearings
Environment-friendly and low-noise motor
options:
• Honda 8hp or 13hp 4-stroke motor
• Electric motor 4000 16A
Maximum output 7.5 kw/10 hp
• Electric motor 8000 16A
Maximum output 15.5 kw/21 hp
8040-000-0005
ML26 9 hp Honda.
For the full list for Logosol
Norwood ML26, see current price list.
30
SAWMILLS & BAND SAWMILLS | Logosol Norwood ML26
TECHNICAL DATA: ML26
Effective saw length: 3,9 m. May be extended by 1.20 m sections
Saw blade: (1 included) Dimension: 3660
mm, 32mm x 1,1mm, 22mm pitch.
Band wheel: 47,5 cm.
Width: 190 cm
Standard length: From 4,5 m
Weight: From approx. 400 kg, depending on
motor option and accessories.
All prices are excl. VAT and delivery.
Toe board LMPro
Extension ML26
Use a toe board to compensate for
cone-shaped logs. The hydraulic
jacks will also lift very heavy logs.
Rollers for easier repositioning of
the log.
Extension 1.2 metres, permanently
attached. For ML26.
8040-001-0005
8034-000-0025
Trailer kit LMPro
Drive your sawmill all the way to
and from the tree. Full kit with
wheels, tow rod, lights and 6 leg
supports.
8030-001-0035
Log loader LMPro
Easily loads or turns larger logs and
holds them in place so that they
can be securely clamped. Complete
with loading ramps, boom and
winch.
8030-001-0025
Toe board ML26
8044-000-0035
FOR LMPRO
Feeder E37 LMPro
Small toe board LMPro
For timber up to 50 cm with integrated turning hook.
8034-000-0010
Small toe board ML26
8044-000-0030
Automate your sawmill! From the
control panel at the end of the
rail you can control starting and
stopping of the saw unit, feed and
carriage return. The feeder keeps
the set feed pressure constant and
automatically regulates the speed.
Leveling stands
A must if you often move the sawmill between different places. Makes
light work of having to adjust the rail.
The pack contains 10 levelling feet.
8030-001-0015
FOR LMPRO
Protective cover
This non-tear protective cover
protects the saw carriage against
snow, water and dirt. Supplied with
strong string ties.
8030-001-0040
6600-000-5000
Protective cover ML26
8040-001-0035
FOR LMPRO
Leg support LMPro
FOR LMPRO
Cut timber feeder
Wire kit LMPro
Strong steel posts, wires and runners for suspending electrical cables
and chip hoses. The posts are
secured to the side of the rail using
strong connectors and are ideal for
use with the trailer kit.
8020-000-0015
All prices are excl. VAT and delivery.
Combine the E37 feeder with a
cut timber feeder that carries the
sawn board away on the return.
In addition to the flaps that carry
the board away, it also has sliding
plates that drop under the saw
blade to protect it during the refeed
process. This is a real time-saver!
8034-000-0015
Strong adjustable leg supports that
raise the saw bed to the right working height. The same leg supports
that are used in the trailer kit.
8030-001-0065
FOR LMPRO
Extension 0.6 m
Extension 0.6 metres, detachable.
8030-001-0010
Millimetre scales
Magnetic millimeter scales in various
stages with the sawcut included.
See price list for more magnetic scales.
Extension 1.2 m
Extension 1.2 metres, permanently
attached. For LM Pro.
8030-001-0005
SAWMILLS & BAND SAWMILLS | Accessories
31
We have saw blades for
In the table you’ll find three variations of quality
sawblades for different sawmill models. Price
shown per piece but is ordered in 5-pack.
Article No.
Width
Article No.
Width
Article No.
Logosol Norwood LM Pro
Length Width
4246
32
9000-032-4246
38
9000-038-4246
32
9001-032-4246
Logosol BS350/BS320
2760
32
9000-032-2760
38
–
32
9001-032-2760
Logosol Norwood ML26, LM40
3660
32
9000-032-3660
38
9000-038-3660
32
9001-032-3660
Forestor 650
3980
32
9000-032-3980
38
9000-038-3980
32
9001-032-3980
Lennartsfors/Jonsered/Serra, Filius
3570
32
9000-032-3570
38
–
32
9001-032-3570
Woodmizer LT10/LT15/LT20/LT40
4000
32
9000-032-4000
38
9000-038-4000
32
9001-032-4000
Woodmizer LT70
4670
32
9000-032-4670
38
9000-038-4670
32
9001-032-4670
PLEASE NOTE! We have blades for bandsaw mills other than just those shown here. All widths and lengths are available for fast delivery. Call us for assistance.
Upgrade your Joinery Bandsaw
Try out professional blades and
see the difference! You can
now equip your own joinery
Bandsaw with professional
blades! Choose between a
Hakansson standard blade or
a Logosol HSS! We have both
blades in widths of 6 to 31mm.
Each blade has a basic cost and
a cost per metre. The blades
are available in packs of five.
Select length
Basic cost
Blade width 6 mm
Blade width 10 mm
Blade width 12 mm
Blade width 16 mm
Blade width 19 mm
Blade width 25 mm
Blade width 27 mm
Blade width 31 mm
32
SAWMILLS & BAND SAWMILLS | Saw Blades
All prices are excl. VAT and delivery.
Automatic
band grinder
your saw mill
Width
Article No.
Width
Article No.
Width
Article No.
38
9001-038-4246
34
9002-034-4246
41
9002-041-4246
38
–
34
9002-034-2760
41
–
38
9001-038-3660
34
9002-034-3660
41
9002-041-3660
38
9001-038-3980
34
9002-034-3980
41
9002-041-3980
38
–
34
9002-034-3570
41
–
38
9001-038-4000
34
9002-034-4000
41
9002-041-4000
38
9001-038-4670
34
9002-034-4670
41
9002-041-4670
r in d lu x
“Th e L o g o s o l G
de s
m a k e s t h e b la
.”
as g o o d as ne w
Logosol Grindlux sharpens your
bandsaw blades completely automatically. A feeder arm feeds the
blade forwards and a clamp, which
is fitted to the blade, turns off the
machine when the blade has been
sharpened one turn. The machine
can be adjusted for tooth rake angle, gullet depth and take off.
A complete range of saw blades
It is easy for you to order. We have many
blades on stock to ensure quick delivery.
If you order a length that we donВґt have
as standard, we will do everything we
can to help you get your blade as soon
as possible.
HГҐkanson Silco Log: Our proven top
sellers with sustainable blade
with hardened teeth.
Perfect for cutting pine
forests.
Logosol Ripper: This blade is
a little stiffer and slightly bet-
All prices are excl. VAT and delivery.
ter suited for broad cuts in hardwood.
Hardened teeth.
Logosol HSS: Our best sawblade. Stays
sharp much longer thanks to the HSS
steel in its teeth. Suitable for all types of
cutting.
Taking care of the bandsaw blades is important. They will last longer if you change
blade after having cut 10-20 logs, and then
recondition the blade you have used. Start
with cleaning and rust protecting the blade
with universal oil, Naturally, the cutting
teeth must be kept sharp, but it is just as
important to grind the gullets, where small
cracks can occur in the material. When
the cracks are ground off and the teeth are
sharp again, the blade should rest at least
one day in order to let the steel recover. After that, the blade is like new again. If you
grind off 0.1 mm (1/128”) every time you
sharpen the blade, you can sharpen it approx. 10 times.
9999-000-1505
Automatic Band Grinder
9999-000-0506
Grinding wheel 6 mm
SAWMILLS & BAND SAWMILLS | Saw Blades
33
For the full list for LM410 see current pricelist.
LOGOSOL LM410
Log Molder and Beam Planer – a Log House Molder unprecedented
A unique log house molder that can do
something no other molder can: besides
being a log house molder, the Logosol
LM410 is also a jointer/ planer for beams
of dimensions up to 60 cm x 60 cm (24’’
x 24’’).
It has to run on rails. The track width is adjustable, which makes the molder fit on most
brands of band sawmills, e.g. LT10 and LT15.
For Lennartsfors, which has significantly
narrower rail width, you need an adaptor to
make it fit, but the adaptor is for free. The
cutter head is 410 mm (16”) wide and laterally adjustable. You can use both planing
and molding knives The planing knives are
included. The knife sets in the current price
list include the knife gibs. You do not have to
remount knives between machining the upper
and lower side of the log. There are two models: Environmentally friendly petrol engine
and 3-phase electric motor.
The chip hose and the power cable are held
in place by the wire that is suspended between
the posts. The wire kit is also compatible with
the chip duct of the bandsaw and with the
trailer kit.
34
SAWMILLS &| BAND
Logosol
SAWMILLS
M7
| LM410
TECHNICAL DATA: Logosol LM410
Length: 28 3/8’’ (720 mm)
Height: 39 7/16’’ (1000 mm)
Width: 55 ¼’’ (1400 mm)
Weight: approx. 441 lbs (200 kg)
Max. width: 23 11/16’’ (600 mm)
Height from rails: 23 11/16’’ (600 mm)
CUTTER HEAD
Diameter: 2 7/8’’ (72 mm)
Width: 16 3/16’’ (410 mm)
Speed of rotation: approx. 6000 rpm
Max. take-off when planing: 5/16’’ (7 mm)
Max. knife pattern protrusion: 1’’ (25 mm)
Lateral adjustment: 7 7/8’’ (200 mm)
8000-000-0515
Log support LM410
To be able to handle large and heavy logs.
8020-000-0010
All prices are excl. VAT and delivery.
LOGOSOL BOARD EDGER C210
Increase your capacity with Logosol’s board edger!
With a board edger you will significantly
increase your production, no matter if you
have a Logosol Sawmill, a band sawmill
or a circular sawmill. Handling timber
becomes more efficient and rational when
finishing roughedged boards in a separate
machine. Set the desired width and send
the timber through the edger. A quick
and easy operation.
Patented Design
Its design, with one circular sawblade coming
from above and one from the machine table,
gives a controlled sawing process. The project
board is pressed against a long straight edge
after the fixed sawblade. This aligns the board
and gives very straight cuts.
Unlimited width of the workpiece
The circular sawblades can be laterally adjusted from 30 to 210 mm, but the workpiece can
be much wider than that. When the machine
is open on one side of the machine table, there
is really no limit to how wide boards you can
edge.
We think that this twin-blade board edger
is the missing piece for you as a small-scale
sawyer, the missing piece that will help you
work efficiently.
Energy Efficient
The board edger is primarily used for edging
boards that come from the outer parts of the
log, and they are normally under 30 mm.
By limiting the cutting height, you can use
smaller circular sawblades and motors. This
gives low operating current, which can be of
great importance when running your sawmill
on the same fuse.
Powerful Feeder
The integrated feeder consists of two big serrated feed rollers, which both pull in and feed
out the workpiece from the machine. The
feed rate is 10 m/min, which is exactly what
you can manage. If you wish to increase the
speed the gear can easily be replaced.
TECHNICAL DATA: Logosol C210
Max. width of workpiece: Unlimited
Max. edging width: 210 mm
Max. thickness of the workpiece: 30 mm
Feed rate: 10 m/min*
Weight including machine stand: 240 kg
*Can be adapted according to your
requirements.
N EW !
5220-000-1000
All prices are excl. VAT and delivery.
SAWMILLS | Logosol M7
SAWMILLS & BAND SAWMILLS | C210
35
N EW !
LOGOSOL COMBI GRINDER
New Powerful Robot Grinder Sharpens Both Chain and Blade
The Logosol Combi Grinder sharpens all
types of saw chains and the majority of
bandsaw blades. The mechanism is run
by compressed air. The design is both
sturdy and user-friendly, and the result
is a more accurate and even tool grinding.
Vibration-free sharpening
The automatic sharpener Combi Grinder
has its natural place in all businesses that
offer sharpening of harvester chains, for example. A unique advantage is that it can be
equipped with an accessory for sharpening
bandsaw blades.
To get a perfect sharpening process, there
is a belt transmission between the motor and
the grinding disc, which takes away any vibration. The machine is easy to use with a
default proportion between tooth depth and
depth-gauge setting. PLC with a counting
device that can be updated for new functions,
is included as standard.
Well-tried technology
Expandable system
Sharpens chains and bandsaw blades
This newly developed sharpening method
36
has been designed in cooperation with the
Swedish company Anab, which during the
last 20 years has developed customized sharpening solutions for the European wood industry.
Besides the accessory for blade sharpening,
SAWMILLS & BAND SAWMILLS | COMBI GRINDER
the Logosol Combi Grinder can be supplemented with a stand and automatic resetting
between right and left side grinding. More
accessories are on the way, e.g. an iron filings
duct for connection of an industrial vacuum
cleaner.
”
Grind the chains to
a 10В° top-plate
angle and a sideplate angle that is
about 60В°.
Mattias Byström, Product Manager
All prices are excl. VAT and delivery.
PLANERS &
JOINERY MACHINES
All prices are excl. VAT and delivery.
37
Combined planer and moulder.
Quick adjustment thanks to a moving side cutter.
Produce material to individual specifications.
PH260 – a small planing mill
Four-cutter planer for small businesses or the serious DIY enthusiast
Producing panelling and moldings from
sawn lumber is a simple and profitable
way to refine wood. Logosol PH260
planes and molds four sides at once.
You can quickly and easily produce all
imaginable standard and custom-made
moldings. As it is easy to reset the cutters, PH260 is perfect for short customized series.
One difference between PH260 and traditional multi-cutter planers is that the upper cutter
and lower cutter are suspended in both ends.
Due to this, the machine is extremely stable,
even though it has considerably wider cutters
than most large planers. The machine table,
where the lower cutter and the side cutters are
fitted, is made of heavy cast iron. The machine
chassis is made of 4 mm (5/32”) sheet steel.
It doesn’t get any smoother
It is impossible to see any difference between
a board that is machined in Logosol’s planer/
molder and one machined in an industrial
machine costing tens of thousands. The only
38
PLANERS & JOINERY MACHINES | PH260
difference is that the more expensive machine
is faster. With PH260 you can machine about
1600 linear feet per hour. With a large industrial machine the output is several yards per
hour. Logosol’s two year warranty also applies
to machines that is used for continuous industrial operation. The reliability of PH260 is
very high due to thermoguards that prevents
each of the five electric motors from being
overloaded
A wide range of moldings
PH260 can handle everything from timber
beams to picture frames. You can choose from
a wide range of standard molding knives or
order your own custom-made knives. Both
standard and specially designed molding
knives are reasonably priced.
Cut deeply
The cutters can handle sizeable depths. This
makes it possible to cut deep and beautiful
patterns. PH260 also has a remarkable capacity when it comes to poorly sawn lumber. The
upper cutter can plane to a depth of 8 mm
(3/8’’), plus the molding depth, in one single
operation, and the side cutters can cut even
more.
Use other cutter system
When delivered, the planer/molder is ready for
squaring. It is set up with HSS planing knives
in the upper and lower cutters, and 50 mm
(2”) HSS planing knives in the side cutters.
The 30 mm (1 3/16’’) spindle diameter of the
side cutters enables you to choose from a number of other cutter systems that are available
on the market today.
Our customers
Many of our customers only have their PH260
for personal use. Even more of them combine
this with selling the finished products or offering subcontract work on a limited scale. It
does not require many hours of paid planing/
molding per year to cover the annual cost of a
PH260. The largest customer group consists
of small businesses in the wood processing
field and DIY-stores.
All prices are excl. VAT and delivery.
30 mm spindle axles, a wide
range of moulding knives.
Mounting only takes 10-20
minutes.
16A European plug.
Ability to start each of the
five motors separately.
Clear plastic window makes
it easy to supervise the process.
Rust proof for outdoor use
and minimal maintenance.
6000 rpm ensures a smooth
surface finish.
Easy setting with user-friendly scales in 0.1 mm steps.
Low-friction inlay in the
machine table ensures problemfree feeding.
Logosol PH260 equipped
with stepless feeding and
in- and out-feed tables.
For the full list for PH260 see
price list.
Planes and moulds
all four sides in one
single operation.
TECHNICAL DATA
Length, width
1100x900 mm
Height
970 mm
Weight
350 kg
4-sided planing
Width
15 to 260 mm
Height
10 to 100 mm
2-sided planing
Width
300 mm
Height
10 to 230 mm
Planing with upper cutter
Width
410 mm
Height
230 mm
All prices are excl. VAT and delivery.
7503-000-2260
Available in other electric versions.
Contact Logosol for information.
Upper horizontal cutter
Diameter
72 mm
Width
410 mm
Continuous output
3kW
Number of rev.
6000 rpm
Planing depth
Max. 8 mm
Moulding depth
Max. 10 mm
Lower horizontal cutter
Diameter
72 mm
Width
300 mm
Continuous output
3 kW
Number of rev.
6000 rpm
Planing depth
0 to 4 mm
Without feeding table and castor set.
Moulding depth
Max. 5 mm
Side cutters
Spindle axle
Diameter
30 mm
Cutter height
Max. 100 mm
Diameter
Max. 140 mm
Continuous output
3 kW
Number of rev.
6000 rpm
Cutting depth Max.
30 mm
Included standard cutter heads
Type TB90, steel
Body diameter
90 mm
Body height
40 mm
Planing knives HSS
Knife width
50 mm
Feeder
Continuous output
0.18 kW
Feeding speed
Standard:
2-12 m/min.
Option
4-24 m/min.
Electric system
Moisture protected, IP54
Total continuous output 12.2 kW
Electricity supply
3-phase,
400V, 16A
PLANERS & JOINERY MACHINES | PH260
39
The mechanical counter means you can keep a
check on things down to one decimal place.
Quick adjustment thanks to a moving side cutter.
Produce material to individual specifications.
PH360 – industry in sleek format
A stable four-head planer/moulder for
professional production. This completely new machine has its place in environments such as woodworking shops, timber yards, homebuilding facilities and,
naturally, in the construction trade. One
and the same machine can mould everything from fine trim work to timber
blocks with outstanding results.
The powerful cast iron table is the heart of the
machine, guaranteeing vibration-free operation. It is bolted onto a stable steel base with
solid foundation support. The bottom cutter,
side cutters and integrated feeder tables are
set into the cast iron table. The top cutter and
feed rollers sit in a separate support that is also
integrated into the cast iron table by way of
oversized trapezoidal bars.
Changes size according to material
If you are planing small materials, such as panels and strips, the top cutter support lays close
down to the table. If you want to feed in fiveinch housing timber, the top cutter support
shifts to a higher position above the table, and
the machine changes height both internally
and externally. The machine can shift up to
9”(230 mm) in height!
It is often a good idea to try to get started
40
PLANERS & JOINERY MACHINES | PH360
quickly with production when you get your
machine home. PH360 essentially requires
nothing more than a good chip extractor before you can get started with your first piece
of work. You can even mount it on wheels.
But this is a machine that is meant to have a
system built around it. The feeder tables are
at a set height so they are easy to extend and
adapt to manage the massive volumes of wood
the machine is capable of processing. Having
a fixed hose system for chip management also
makes for a significant improvement. Keep
things organised, clean and straight, and then
you’ll keep your productivity up!
ment, considering such a large capacity machine.
We have taken several measures to make
it easier to get perfect results. Among other
things, the top cutter has a greater diameter
than its predecessor, and it has a double outlet
for chip extraction to keep things truly clean
and clear and reduce the risk of chip marking. The feeder table has a straight guide that
comes in handy when planing flooring, gluing
strips, or furniture. A larger and heavier machine is also an automatic advantage when it
comes to roughness.
Sufficient capacity
All the settings you need can be found on
the same side of the machine, which means
that the machine can be set up close to a wall,
thereby saving space. The handles that set
height and width have gauges, so you can easily read off measurements down to a fraction.
The lever for rapid setting of the straight
guide is easily accessible from the feed table,
and therefore also close to the control panel.
There is a separate start, stop and lamp for
each cutter and for the feeder unit. There is
also an extra button for your chip extractor so
that the entire process can be controlled from
where you are standing. We knocked off the
entire wish list in one go!
Each of the machine’s cutters has its own
large motor, sufficient for every imaginable
type of processing of every possible type of
wood. Feed rate is continuously adjustable up
to 98 ft/min(30 meters a minute). A realistic
feed rate for one person to handle is around
20 ft/min(6 meters per minute), while two
people can handle a speed of approximately
49 ft/min(15 metres a minute) to keep up a
smooth work tempo. The machine can run
on a 60-amp electrical supply. Keep in mind
that power is also drawn by the blower, so
you should also have a 40-amp supply for the
Chip Extractor. Not much electrical require-
Impressive control panel
All prices are excl. VAT and delivery.
Fixed feed table height for
easy extension and adjustment
to large volumes of wood.
With the counter, the job is
soon completed.
Twin outlets for a chip extractor keep everything properly
clean.
Feed table with alignment
support.
Impressive control panel.
Outstanding surface finish.
All controls are on the same
side of the machine.
Available in other electric versions.
Contact Logosol for information.
The machine can manage on a 16A
fuse, provided you are planing standard
mouldings and panels, but it must be
connected using 6 mm2 cable and a 32A
red three-phase connector to comply
with the regulations. Remember that the
fan will also draw current, so you should
have a main fuse of 20A rating.
For the full list for PH360,
see current price list.
7536-000-0000
TECHNICAL DATA
Dimensions and weight
Length and width:
2,970 x 1,125 mm
Height:
1,430 mm
Weight: 600 kg(1322 lbs)
4-sided moulding
Width:
360 mm
Height:
10 to 130 mm
2-sided moulding
Width:
410 mm
Height:
10 to 230 mm
Straight planing (assembly required)
Width
510 mm
Height
230 mm
Top horizontal cutter
Diameter:
88 mm
Width: 510 mm
Output:
5.5 kW (7.5 Hp)
Rotational speed: 7,000 rpm
Take-off when planing:
0-8 mm
Take-off when moulding:
All prices are excl. VAT and delivery.
Max. 20 mm
Bottom horizontal cutter
Diameter:
72 mm
Width:
410 mm
Output:
4 kW (5.5Hp)
Rotational speed: 7,000 rpm
Take-off when planing:
0-8 mm
Take-off when moulding:
Max. 10 mm
Side cutters
Diameter of spindle axel:
30 mm
Cutter height: Max. 130 mm
Diameter:
Max. 140 mm
Output:
3 kW (4Hp)
Rotational speed of side
cutters:
7,000 rpm
Cutting depth: Max. 30 mm
Included side cutters
Quantity:
2
Type:
TB90
Diameter, body:
90 mm
Height, body:
40 mm
Cut, type: Planing knife HSS
Cut, width:
50 mm
Feed, planetary variator
Output: 0.75 kW (1 Hp)
Feed rate: 3-15 m/min or
6-30 m/min
Electrical system
Total output:
16.25 kW
(22 hp)
All motors are equipped
with overheating protection.
Electrical connection
3-phase, 400 V, 32 A
PLANERS & JOINERY MACHINES | PH360
41
Exactly as in the case of PH260, the DH410 is easily operated from a control panel. Ability to start each of the cutters
separately.
Sturdy in- and out-feed tables that follow the setting of the
machine table.
DH410 – planer with
a width of 410 mm
Logosol DH410 has a lot in common
with our PH260. The machine is built
on the same principles and most of its
components are the same as PH260’s,
which means that it is a very stable
machine with a cast-iron machine table and separate motors for each cutter
and the feeder. Both the machines also
have the same type of knives and cutter
heads.
The difference is that DH410 works with two
cutters instead of four. Four-sided planing is
made by running the board twice through the
machine, while you only machine the board
once when planing and dimensioning two
sides up to a width of 310 mm and a height
of 100 mm.
The DH410 is primarily bought by customers who want a machine that can produce
the same result as a four-sided planer/moulder,
but can accept that the production takes a
little more time. One advantage of the DH410
when compared with the PH260 is that you
get a reliable planer with a width of 410
mm. Some of our customers have rebuilt the
42
PLANERS & JOINERY MACHINES | DH410
The stepless feeder is
available in two options,
2-12 m/min. and 4-24
m/min.
Producing beaded tongue
and groove with the DH410
STEP 1: Mount moulding knives in
the side cutter. Set the height so that
it is about 2 mm higher than the
finished product. By using the fence,
set the width so that it is 2 mm wider
than the finished product. Machine
the board! Now, one side is ready and
the underside is planed.
DH410 to make it possible to plane tapered
boards for flooring or panelling.
The machine can also be used as a vertical
mill with feeder. If you do not want to plane
the top side of the board, you replace the steel
rollers with rubber rollers.
STEP 2: Mount the other side’s
moulding knives in the side cutter.
Mount two moulding knives in the
horizontal cutter. Set the height by
adjusting the table, and the width by
adjusting the fence. Turn the board
over and machine it! Now, you have
a finished beaded t&g!
All prices are excl. VAT and delivery.
Easy setting with user-friendly scales in 0.1 mm steps.
Ability to start each of the
three motors separately.
6000 rpm ensures a smooth
surface finish.
16 A European plug.
Max. planing dimensions:
410x260 mm.
Low-friction inlay in the
machine table ensures problemfree feeding.
Rust proof for outdoor use.
Minimal maintenance.
Machines two sides at a time.
for four-sided planing you run the
board twice through the machine.
Available in other electric versions.
Contact Logosol for information.
For the full list for DH410
see price list.
7301-000-0410
Without castor set and in- and out feed table
TECHNICAL DATA
Planing
Width
Height
2-sided planing
Width
Height
Horizontal cutter
Diameter
Max. 410 mm
Max. 260 mm
Max. 325 mm
Max. 100 mm
72 mm
All prices are excl. VAT and delivery.
Width
Continuous output
Number of rev.
Planing depth
Moulding depth
Side cutter
Diameter
Height
Max. diameter
Max. height
Spindle axle
410 mm
3 kW
6000 rpm
Max. 8 mm
Max. 10 mm
90 mm
40 mm
140 mm
100 mm
30 mm
Continuous output
3 kW
Number of rev.
6000 rpm
Cutting depth
Max. ca. 30 mm
Included knives
Horizontal cutter
Side cutter
Two, 410 mm
Two, 50 mm
Feeder
Continuous output
0.18 kW
Speed
Standard 6 m/min.
Option 2-12 m/min.
Option 4-24 m/min.
Electric system
Moisture protected IP54
Total continuous output
Electricity supply
Dimensions
Length, width
Height
Weight
6.2 kW
3-phase,
400V, 16 A
1000x840mm
1230 mm
225 kg
PLANERS & JOINERY MACHINES | DH410
43
Up to 250 mm (10”)
Up to 410 mm (16”)
Unique combination – cutter head and circular
saw blade
Cast iron table gives stability.
Impressive capacity.
SH410 – Unique Perfomance
New Soloplaner resaws and moulds in one single operation
The Soloplaner has become much appreciated
by woodworkers and sawmill owners. The
possibility of resawing and moulding in one
single operation has solved a lot of problems
and saved many working hours.
The forerunner, the Soloplaner SH230, has
been a great success since its introduction over
10 years ago. It has been much appreciated
for its versatility and simplicity, which make
it almost indispensable once you have experienced its benefits. In the successor, Logosol
has taken the sawing and planing functions
to a new level, which is even better suited for
bigger projects and all types of woodworking
workshops with high standards.
Resaw through Thick and Thin
Originally, the machine was built for dimensioning of planks and boards in one pass. The
timber gets planed to the set thickness at
the same time as it gets resawn to the right
width. This function is spot on and feels indispensable in all building projects once you
have got used to it. Plastic sheets on the ma-
44
PLANERS & JOINERY MACHINES | SH410
PH260
chine table enable you to machine both dry
and wet wood without any problems with
feeding it through.
A Safe Resaw
The machine can also be used as a resaw without the planing function. The Soloplaner has
attracted much attention from the building
trade, since it eliminates the operation that
causes most serious hand injuries at construction sites, namely the use of a resaw. When
using the Soloplaner, the workpiece is quickly and safely fed through the machine and is
with accuracy resawn into the set dimensions.
Quarter Rounds from Boards
Use the full potential of the machine and fit
moulding knives in the cutter head. You can
resaw, square, plane and mould at the same
time! Examples of products that can be made
in one single operation are quarter rounds,
floor decking and some mouldings. More
advanced mouldings like panelling or crown
mouldings can require two or more goes
through the machine. You can even produce
wide floor boards with tongue and groove!
Professionally Sturdy
The machine is built around a sturdy cast iron
table that is suspended by trapezoidal bars in
the steel chassis, which stands firmly on the
ground. A 5 hp motor runs both the cutter head
and the circular sawblade. The feeder is run by
a separate motor with bevel gear. The heavy design with vibration absorbing cast iron ensures
accurate resawing and a perfect planing result.
Adapt the Machine to the Business
The machine is ready to use in its basic design,
the circular sawblade and the planing knives are
fitted and set so you can quickly get started with
your production, but there are already a number
of accessories for the machine. Extra side stops
and extension tables for the in- and out-feed side,
adjustable feeding speed and, of course, hundreds
of moulding knives to choose from. SH410 can
take upper cutter knives with 3/4” protrusion,
exactly like our largest planer/moulder Logosol
PH360!
All prices are excl. VAT and delivery.
A central function in your woodworking
workshop.
N EW !
Material preparation for making glulam,
90 degrees angle at once!
Quick setting of planing height.
Resaw and plane to the right
dimensions in one single operation!
Production of ready-for-use joists,
mouldings, flooring, panelling and
lots of more.
TECHNICAL DATA
Planing width:
Planing height:
Resawing height:
Moulding depth:
Feed speed:
16 3/16”
9 5/8”
3”
3/4”
Fixed (20 ft/min)
Variable (7-39 ft/min)
Number of rev, cutter head:
6000 rpm
Electrical connection:
Single phase, 230 V
Total continuous output:
4,3 hp
Weight:
430 lb
Accessories:
Extension table, chip set-up,
moulding knives, etc.
All prices are excl. VAT and delivery.
7202-000-0230
For the full list for SH230
see current price list.
PLANERS & JOINERY MACHINES | SH410
PH260
45
Convenient lever for quick
adjustment of planing height.
Easy adjustment with userfriendly scales.
Setting for board squaring
takes a few seconds.
Max. dimensions of finished
product: 230 x 52 mm.
A wide range of moulding
knives. Mounting only takes
5–10 minutes.
Accessory: adjustable
feeder 2–12 m/min..
100 mm connection
for chip extractor.
Pressure roller
and fence guide the
workpiece straight through
the machine.
Abutments for in- and outfeed tables of wood or steel.
Rust proof for outdoor use
and minimal maintenance.
6000 rpm ensures a smooth
surface finish.
The Golden Axe
The award for the
best wood processing
machine, presented
jointly by the Swedish
Land Magazine, Elmia
Trade Fair and the Forest
Owners Association.
For the full list for SH230 see
current price list.
Resawing, planing and
moulding can be done at the
same time or each separately.
7202-000-0230
LOGOSOL SH230
Without castor set, stand and table.
The Soloplaner resaws, planes and moulds in one single operation
The Soloplaner belongs in every sawmill owner’s and carpenter’s workshop.
It is a versatile machine which squares,
resaws, planes and moulds. When you
have got used to its high capacity and
many possibilities, the Soloplaner will
be indispensible.
The Soloplaner planes the timber and cuts it to
the right width in one single operation. What
makes this possible, is the 230 mm wide cutter that has a circular saw blade fitted directly
to its side. The cutter and the circular saw
46
PLANERS & JOINERY MACHINES | SH230
“
A must for ever y
carpenter and craf tsman
blade rotate at a speed of 6000 rpm, which
gives a quality result both on the planed
and the sawn surfaces. In Logosol’s Moulding Knives Catalogue you can find several
examples of mouldings you can produce. The
moulding knives can be utilized at the same
time as the planing knives and the circular saw
blade.
TECHNICAL DATA
Planing width
Max. 230 mm
Planing height
Max. 52 mm
Moulding depth
Max. 15 mm
Number of rev. cutter
6000 rpm
Number of rev. saw blade
6000 rpm
Saw blade diameter
180 mm
Total continuous output
3.2 kW
Feed speed
5 metres/min.
Electricity supply
3-phase, 400 V, 16A
Weight
90 kg
Height, length, width
600, 700, 600 mm
All prices are excl. VAT and delivery.
Planing and Squaring
The Soloplaner is mostly used for planing and squaring. The
boards are cut to the right width and are simultaneously
planed. If you want to machine all four sides, you just run
Height and width are adjusted
in two simple operations.
The saw blade resaws at the
same time as the board gets
planed.
the board twice through the machine.
Height and width settings are made in two simple operations.
From the other side emerges a
finished product with the exact
dimensions you have decided
upon.
If you want to machine all four
sides, you just run the board
twice through the machine.
Moulding with the Soloplaner
Moulding is another field of use. With the Soloplaner you
can machine plain boards into valuable panelling, cornices,
skirting boards, door and window frames, etc. The moulding
Moulding knives are mounted
in the cutter.
All prices are excl. VAT and delivery.
Height and width are adjusted
in two simple operations.
knives are of HSS quality and they stay sharp for 3000-6000
linear metres of timber. The knives can be sharpened 5-10
times.
The saw blade resaws the board
into the chosen width at the
same time as the moulding
knives mills the board.
From a plain, unprocessed
board you have now got a valuable machined product.
PLANERS & JOINERY MACHINES | SH230
47
Keep sharp with the
Tormek method
The grinding stone revolves slowly, no more
than around 100 rpm, dipping into a water
bath as it does so. It has everything needed
to ensure perfect sharpening! All jigs and
accessories fit both the T-7 and T-3. We
recommend the Tormek T-7 if you need to
sharpen HSS steel for Logosol’s machines,
as its bigger motor can deal with higher
grinding pressures. Both models have highquality motors and shafts made of stainless
steel. T3 has a strong plastic stand, and the
stand for the T7 is made of steel plate.
Knife Sets for your planer
Logosol has selected the most useful and popular knives. With the
knife sets for PH260, PH360 and DH410 you can produce bevelled
panels, beaded panels, floorboards, joists, American casings, crown
mountings and plane grooves and recesses in casings and panels.
You will find more moulding knives in our Tool catalogue.
Knife Set PH260
Knife Set PH360
Following moulding knives are included:
94213HSS, 94214HSS, 94208HSS, 94216HSS,
94261HSS, 94215HSS, 94219HSS, 95023HSS,
95024HSS, 95008HSS, 95015HSS, 95072HSS,
96019HSS and 3 pair of wedges.
Following moulding knives are included:
94213HSS, 94214HSS, 94208HSS, 94216HSS,
94740HSS, 95023HSS, 95024HSS, 95008HSS,
94739HSS, 94261HSS, 94215HSS, 94219HSS,
94269HSS, 95015HSS, 95072HSS, 96019HSS
and 4 pairs of wedges.
7502-001-1500
7536-001-1500
Knife Set DH410
Knife Set Tongue & Groove
Following moulding knives are included:
94213HSS, 94214HSS, 94208HSS, 95023HSS,
95024HSS, 95008HSS, 94280HSS, 94278HSS,
94219HSS, 95015HSS, 96019HSS and 2 pair of
wedges.
Following moulding knives are included:
9016HSS, 9017HSS, 94213HSS, 94318HSS,
94220HSS, 94221HSS, 95021HSS, 95022HSS,
95023HSS, 95024HSS, 95056HSS, 95057HSS,
95078HSS, 95079HSS.
7302-001-1500
Tormek T7 Grinder
For sharpening planing and moulding knives and
other tools. 220 V. Comes with a very informative, hardback instruction book of 147 pages.
7010-000-1015
Tormek T7, grinder
7010-000-1020
Tormek T3, grinder
7010-000-1005
Jig for planing knives
7010-001-1012
Jig for moulding knives
TB90-003
Knife Set Decking
Knife Set End Milling
Following moulding knives are included:
94208HSS, 94295HSS, 94248HSS, 95008HSS,
96017HSS.
Following moulding knives are included:
95166HSS, 95164HSS, 95165HSS, 96073HSS
and following safety knives: 95166S, 95164S,
95165S, 96073S.
TB90-002
TB90-001
Knife Set and Saw Blade for SH230
Knives for production
of panelling, door
and window frames,
skirting boards and
cornices. They can be
made smooth, “swan-neck” profiled, rounded
or bevelled
Following moulding knives are included:
94215HSS, 94223HSS, 94261HSS, 94283HSS,
94286HSS, 94296HSS, 94297HSS, 94298HSS +
6 pair of wedges.
7202-001-1500
A sharp tip!
For full list for
the Tormek
jigs, see price
list.
48
PLANERS & JOINERY MACHINES | Accessories
Saw Blade for the Solo Planer
Saw blade of hardened
steel. The teeth are of
tungsten carbide.
7200-000-1300
D: 180 mm, d: 48 mm, t: 2,8/1,9 mm.
7200-000-1301
D: 180 mm, d: 48 mm, t: 4,5/3,5 mm
All prices are excl. VAT and delivery.
In- and Out-feed
Table PH260
Made of sheet steel. Follows the
setting of the machine table.
7500-000-1000
Knife Gibs PH360
Castor Set
For mounting moulding knives in
horizontal cutter. PH360 upper cutter.
4 turnable and lockable castors.
Diameter 75 mm. Fits all of Logosol’s planer/moulders.
KIL360-048
Cutter head TB912
7500-000-1025
Cutter head with slots for two
knives, 120 mm.
TB912-92
In- and Out-feed
Table DH410
Made of sheet steel. Follows the
setting of the machine table.
Moisture Meter
Spindle extension
Measures the moisture level in your
timber before planing.
Fits PH260, left + right. To allow
fitting of higher cutters.
Knife Gibs
7502-001-1164
7500-010-1010
7000-000-9502
Knife gibs (standard)
price/pair
7000-000-9506
Knife gibs (adjustable)
price/pair
7000-000-9508
Knife gibs (short)
price/pair
In- and Out-feed
Table SH230
Made of sheet steel. Follows the
setting of the machine table.
7202-001-0400
Metre Counter
It continuously displays the number
of machined linear metres. For all
Logosol Planers.
7500-000-1040
All prices are excl. VAT and delivery.
9999-000-0012
For mounting moulding knives in
horizontal cutter. For PH260 and
PH360 lower cutter.
Cutter heads TB90
Side cutter for PH200, PH260 and
DH410. Two cutter heads can be
used by mounting one on top of the
other. Gibs and planing knives are
included.
7000-000-9092
Cutter head with slots
for two knives
7000-000-9094
Cutter head with slots
for four knives
Magnetic Adjuster
For adjusting planing knives in the
lower and upper cutter.
7500-001-0050
For upper cutter
7500-001-0051
For lower cutter
Setting Rule
Setting rule for the side fences of
the PH260. The rule has rubber
coated magnets that you fit to the
carriage of the moveable cutter.
By using the side-cutter crank you
can adjust the rule so that it is level
with the cutter. Then you set the
fences against the rule.
7502-001-0405
Setting Block
For setting the height of the
planing knives.
7500-000-1020
PLANERS & JOINERY MACHINES | Accessories
49
Start and stop. No resetting between jointing
and planing operation. It cannot get easier than
this.
By using a lever, the front jointer table can quickly be adjusted for cutting depths of between 0
and 10 mm.
Use the jointer on the upper machine table and
then use the planer on the lower table. Entirely
without resetting!
JOINTER/PLANER H410
It does not require resetting between jointing and planing operation.
A jointer/planer is the base of the joinery
shop. When you are jointing or planing
the timber you are laying the basis for
the following work. The better planer,
the better final result you will get. So,
this is a machine that is well worth going in for.
Logosol’s jointer/planer is built the same way
as the professionals’ many times more expensive machines. It has precision-processed machine tables of cast iron, a stable side fence and
double motors. Here you find the power to
joint and plane the hardest sorts of wood.
Heavy precision in a compact format
With the help of a lever the front jointer table
can quickly be adjusted for a cutting depth of
between 0 and 10 mm. The rear jointer table
can be micro-adjusted. The table is fully 310
mm wide, which allows jointing of wide and
thick timber. The side fence is very stable and
can be adjusted from 0 to 45 degrees. Since
you do not have to alter the machine between
50
PLANERS & JOINERY MACHINES | H410
jointing and planing operation, you can rely on
the machine to keep its settings. Other planers
have to be altered between jointing and planing operation. With this jointer/planer you
do not have to fold away the jointer table or
remove the chip outlet. You just plane immediately after the jointing without even turning
the motor off! This will, of course, save you a
lot of time, and at the same time you get outstanding precision and capacity.
metres per minute. As an option, there is also
a stepless, adjustable feeding which feeds 2-12
metres per minute.
The cast iron construction of the machine
gives high stability, increased durability and
excellent precision. The sturdy design makes
it safer for you as an operator when using the
machine. A solid and accurate machine minimizes the risk of vibrations and dangerous
sudden moves in the workpiece.
Stable planer
A small-scale professional machine
The planer, which is below the jointer table,
machines workpieces that are 410x260 mm.
The feeding is done with double rollers, the
first one of ribbed steel, the second of rubber.
Smaller machines often have only one motor
that runs both the cutter and the feeding.
This is a cheap construction which most often
works pretty well. But to get increased power,
reliability and flexibility, the jointer/planer
H410 has, like our larger machines, separate
motors for the cutter and the feeding. In its
basic version H410 has a feeding speed of 6
The jointer/planer H410 is the choosy hobby
joiner’s dream, but it is actually dimensioned
for small joinery workshops. Here, it will
really show its true potential. If you, for instance, have a cabinet making shop, and need
to produce several special details from different wood types, this machine is an excellent
aid. The powerful feeding, and the reliability
and speed that the switching between jointing
and planing gives, ensures that the planer will
be a long-term and profitable investment.
All prices are excl. VAT and delivery.
LOGOSOL H410
No resetting needed between jointing
and planing operation.
Made in Sweden
2 or 4 planing knives in the cutter head.
Quick setting of the front jointer table.
The scale for the planer table is in steps
of 1 and 1/10 mm.
Available in other electric versions.Contact Logosol for information.
The rear jointer table can be microadjusted.
Big and stable jointer fence.
Precision-processed machine tables of
cast iron.
Separate motors for cutter and feeder.
Integrated jointer guard.
Use the jointer on the upper
machine table, and then use the
planer on the lower table.
Entirely without
resetting!
For the full list for
H410 see price list.
7102-000-0205
TECHNICAL DATA
Jointing
Table width, jointer
Table length, jointer
Cutting depth, jointer
Fence size
Table length, planer
310 mm
1400 mm
0-10 mm
152 x 1100 mm
Planing
Table width, planer
All prices are excl. VAT and delivery.
410 mm
Planing width
Planing height
Cutting depth, planer
Cutter head
Diameter, cutter
Number of revolutions
Motor
630 mm
Max. 410 mm
Max. 260 mm
Max. 4 mm
72 mm
6000 rpm
3 kW
Feeder
Diameter, feed rollers
Motor power
Feeding speed:
Variable feeding (option)
Without castor set
32 mm
0.18 kW
Standard 6 m/min
2-12 m/min
Weight and electric system
Weight
195 kg
Electric system
3-phase, 400V, 16A
Thermoguards
On each motor
PLANERS & JOINERY MACHINES | H410
51
The planer is easily operated from this control
panel. Ability to start each of the cutters separately.
You plane the workpiece into width and height
in one single operation. With the side cutter you
can also mould the timber.
Use the jointer on the upper machine table and
then use the planer on the lower table. Entirely
without resetting!
MULTI-PLANER MH410
No resetting between jointing, planing and moulding.
Logosol’s multi-planer is a jointer, a planer and a moulder in one and the same
machine. Furthermore, you can use it
as a vertical milling machine equipped
with a feeder unit. Unleash your creativity – the possibilities are endless!
eration. This gives you a machine that does not
require any resetting between jointing, planing and moulding. It is this unique combination that gives you all the possibilities!
To start with, you have a perfect jointer/planer,
but it is also equipped with a side cutter. The
construction is completely unique. You plane
the width and thickness in one single operation. With the side cutter you can also mould
the timber. This means that you can make
tongued and grooved flooring, for instance.
When you are using the machine as a moulder,
you machine the timber twice in order to process the workpiece on all four sides. Compare
this with a standard jointer/planer or a vertical
milling machine, in which you have to machine the workpiece at least four times.
The efficiency and the precision increase dramatically when using the multi-planer instead
of a traditional jointer/planer or a vertical
milling machine. The reason for this is that
the workpiece first is machined on two sides
by the jointing operation, and then it can be
planed and mould on the remaining two sides
in one single operation. This is of great use to
you if you, for example, are producing joinery
components.
You do not need any extra floor space, since
you at a reasonable price get both efficiency
and several valuable operations in one and the
same machine. Due to this the multi-planer
MH410 is the natural choice for you who require high efficiency and precision.
When delivered, the horizontal cutter is
equipped with two planing knives, but the
Unique combination
Thanks to the width of the planer table, you
can use the part closest to the side cutter for
moulding and the other part for planing op-
52
The natural choice in small joinery
workshops
PLANERS & JOINERY MACHINES | MH410
cutter can take a total of four planing knives.
So, you can mount two additional knives when
you want an extra fine surface finish. Normally, the two additional knife slots are used for
moulding knives. Even though the maximum
protrusion of a moulding knife in the horizontal cutter is 2 mm, it is possible to produce
several different profiles on the plane side of
the workpiece.
Reliable feeding
In its standard design the machine is equipped
with two ribbed steel rollers in front of the
cutter and a rubber roller on the out-feed side.
If required, the machine can be equipped with
only rubber rollers. A separate motor runs the
feed rollers via a robust chain transmission,
which gives a very reliable feeding. A steplessly adjustable feeding is available as an option.
The entire machine is built around the
heavy cast iron table to give as high stability and durability as possible. The machine’s
simple but robust design makes it secure and
easy to survey so that you can feel safe while
operating it.
All prices are excl. VAT and delivery.
LOGOSOL MH410
Made in Sweden
No resetting between jointing, planing
and moulding.
2 or 4 planing knives in the cutter head.
The scale for the planer table is in steps
of 1 and 1/10 mm.
The rear jointer table can be microadjusted.
Quick setting of the front jointer table.
Available in other electric versions.Contact Logosol for information.
Big and stable jointer fence.
Precision-processed machine tables of
cast iron.
Separate motors for cutter and feeder.
Use the jointer on the upper
machine table, and then plane
two sides on the lower
table. entirely without resetting!
For the full list for MH410 see price list.
TECHNICAL DATA
Jointing
Table width, jointer
Table length, jointer
Cutting depth, jointer
Fence size
310 mm
1400 mm
0-10 mm
152 x 1100 mm
Planing
Table width, planer
All prices are excl. VAT and delivery.
410 mm
Table length, planer
Planing width
Planing height
Cutting depth, planer
Cutter head
Diameter, cutter
Number of revolutions
Motor
7103-000-0305
630 mm
Max. 410 mm
Max. 260 mm
Max. 4 mm
72 mm
6000 rpm
3 kW
Feeder
Diameter, feed rollers
Feeding speed
Variable feeding (option)
Motor
Without castor set
32 mm
Standard 5 m/min.
2-12 m/min.
0.18 kW
Weight and electric system
Weight
245 kg
Electric system
3-phase, 400V, 16 A
Thermo guards
On each motor
PLANERS & JOINERY MACHINES | MH410
53
We lay great stress on your safety. That is why
the SUVA guard is included when you buy
Logosol PS315.
The stable carriage runs on 16 tempered steel
balls with an impressive diameter of 19 mm.
The saw comes completely equipped with a
universal saw blade of 315 mm and an extension
table for the sliding table.
Dimensioning Saw PS315
An extremely stable dimensioning saw with high precision.
Every hobby joiner who has a table saw
knows that the saw does not always deliver the expected precision. At the same
time, everyone who has bought boards
or laminates sawn by a professional
knows the value of millimetre precision and straight edges with even surfaces. The pros use dimensioning saws
that cost as much as a new car. Logosol’s
dimensioning saw gives exactly the
same results, but at a considerably lower
price.
Logosol’s dimensioning saw is in the main
built from one single piece of sturdy cast iron,
which gives excellent stability and vibration
damping. The precision-processed saw table,
next to the circular saw blade, goes down under the sliding table, which means that all
parts that affects the sawing are connected to
the cast iron table. The table is supported by a
firm steel-sheet under frame.
The heavy and stable sliding table runs on
sixteen tempered steel balls with the impressive diameter of 19 mm. The balls run in
54
PLANERS & JOINERY MACHINES | PS315
tempered steel tracks in an aluminium profile, which is firmly bolted to the cast iron.
This design gives a stable and almost unreal
smooth movement, even in the dustiest environments.
Saw blade and fence
The circular saw blade can be precision adjusted both in height and angle (0-45 degrees). It
is vibrationlessly run by a quality motor of 3
kW via a Poly-V belt. When maximally loaded the motor delivers nearly 6 kW.
The resaw fence, which runs along a steel
bar, has micro-adjustment for fine-tuning the
width in tenths of a millimetre. The fence can
be mounted standing or lying, depending on
the height of the workpieces to be sawn. The
angle fence on the sliding table can be mounted on both sides of the table, so that you can
choose between pushing the workpiece with
the fence or pushing the workpiece against the
fence. All sawing angles are, of course, adjustable.
The dimension saw PS315 comes completely equipped with a universal saw blade
of 315 mm, a stable SUVA guard for the saw
blade, an extension table for the sliding table
and the out-feed table. There is a chip extractor connection under the saw blade, and also
the blade guard can be connected to a chip
extractor. As accessories there are additional
extension tables for the sliding table, clamping devices and saw blades suitable for different purposes.
A small-scale professional machine!
Logosol offers small-scale machines that do
the same job as large industrial machines, only
they are smaller in size and lower priced. Logosol’s dimensioning saw cuts as well as larger
professional machines. What makes our dimensioning saw different from industrial machines is that it is not optimal for large-scale
production where large work-pieces are machined. However, Logosol’s dimensioning saw
suits smaller joinery shops or other businesses
that work with small-scale wood processing
and have high quality requirements on their
products.
All prices are excl. VAT and delivery.
LOGOSOL PS315
Made in Sweden
SUVA guard is included.
Micro-adjustment of the
resaw fence.
Unique bearing construction that gives a stable
movement and a fine cut.
Full-size, stable sliding
table mounted on a cast
iron chassis.
SUVA guard for the saw
blade.
Available in other electric versions.
Contact Logosol for information.
TECHNICAL DATA
Capacity
Sawing height
0-104 mm
Spindel diameter, standard
30 mm
Saw blade diameter
315 mm
Number of rev., saw blade
4400 rpm
Saw blade tilting
0-45 degrees
Dimensions
Length between saw blade
and resaw fence
800 mm alt. 400 mm
Sliding table length
1250 mm
Sliding table width
350 mm
All prices are excl. VAT and delivery.
Sliding table cutting length
1235 mm
Table length
900 mm
Table width
750 mm
Table height
850 mm
Motor
Continuous output, motor 3 kW
Electric system
3-phase, 400V, 16 A
extensions
Widening of the sliding table (L x W)
500 x 350 mm
Widening of table (L x W)
900 x 440 mm
Extension for the sliding table (L x W) 500 x 150 mm
Weight
295 kg
7101-000-0105
Table extension for outfeed end, 500x150 mm,
includes 500x350 mm carriage width extender
and SUVA guard. Castor set and split table available separately.
For the full list for PS315,
see current price list.
PLANERS & JOINERY MACHINES | PS315
55
X-Y table can be mounted on the carriage to
make vertical and horizontal movements possible for long-hole drilling, making recesses for
mounts and locks, tenoning, etc.
The feeder unit makes your multi-moulder a
fully professional machine. The workpiece is
fed through the machine with a speed that is
adjustable in eight steps, from 2.5 to 54 metres
per minute.
The moveable vertical arm makes the machine
easy to use and leads to fewer work steps as the
machine can be adjusted for the work at hand.
Vertical Milling Machine MF30
– a multi-moulder with several unique operations and features.
Logosol’s vertical milling machine is the
universal machine in the joinery shop.
It helps you with everything from preparing timber lengthwise and crosswise
for finger jointing, to milling complete
windows and advanced furniture components.
The multi-moulder MF30 is a vertical milling machine out of the ordinary for milling
against fence, end and side milling on carriage,
curve milling, and milling on XY-table. In
addition, it has three unique functions, which
you otherwise only find in advanced industrial
machines.
• The cutter can be tilted in two directions, enabling you to do more with the
same tool.
• The spindle can easily be replaced with a
high-speed cutter for shank end milling.
• The mill fence can be tilted, which gives
maximal contact with the surface of the
workpiece, no matter what angle the spindle
56
PLANERS & JOINERY MACHINES | MF30
has or what tool is used. The fences can also
be moved laterally to fit the size of the tool.
In addition, the machine has a big and stable
carriage, which enables you to secure the workpiece for processing of the highest precision.
Three additional machines
As a vertical milling machine the multimoulder MF30 gives you more for the money;
more than you get from any other machine.
And into the bargain you get three additional
machines. The secret of it is that the entire motor unit with the spindle can be tilted through
270 degrees! This gives you:
• A tenoning machine with tiltable spindle.
• A long-hole drill with tiltable spindle.
• A plunge router with tiltable spindle.
You have four machines with five functions in
the same shell. This gives you possibilities that
otherwise would require a whole assembly of
machinery, so you save both time and space.
There are a great number of accessories and
tools for the machine. When using the vertical
milling machine MF30, you can shape wood
however you like.
The tiltable vertical arm makes the machine
easy to use and leads to fewer work steps as the
machine can be adjusted for the work at hand.
There are accessories available for all sorts of
requirements. For instance, there are extensions for the carriage and the table, a kit for
curve mouldings, feeder unit, etc. You work
in comfortable work postures and can concentrate on realizing your dreams from wood!
High quality gives safety and precision
The entire machine is built around the heavy
cast iron table to give as high stability and durability as is possible. The fences and the carriage are strongly built to give the best precision possible. The machine’s simple but robust
design makes it secure and easy to survey so
that you can feel safe while operating it. The
simplicity also makes it extremely reliable in
service.
All prices are excl. VAT and delivery.
LOGOSOL MF30
Made in Sweden
Vertical milling machine with several
operations.
The spindle can tilt up to 270 degrees.
Cast iron chassis.
High-speed spindle for shank end milling.
Easy to replace spindles.
The spindle can also be adjusted laterally.
Full-size and stable carriage with great
capacity.
Tiltable mill fence.
TECHNICAL DATA
Spindle diameter, standard
30 mm
Spindle for shank end milling (accessory)
6-20 mm
Max. tool diameter (with standard duct) 200
mm
Max. tool height
130 mm
Number of rev., spindle 3000, 6000, 9000 rpm
Fence length
1100 mm
Fence height
152 mm
Number of rev., spindle for shank end milling
3000, 6000, 9000, 14000 rpm
All prices are excl. VAT and delivery.
Movements of the spindle
Tilting
Vertical movements
Horizontal movements
Continuous output, motor
Dimensions
Sliding carriage length
Sliding carriage width
Sliding length
Table length
Table width with carriage
Table height
Weight
270 degrees
500 mm
350 mm
3 kW
1100 mm
350 mm
1087 mm
900 mm
750 mm
850 mm
375 kg
Available in other electric versions.
Contact Logosol for information.
7100-000-0005
Without castor set
For the full list for MF30,
see current price list.
PLANERS & JOINERY MACHINES | MF30
57
THE FLOORING FACTORY
We have what you need, starting from the log right to the end T&G
Formerly, you had to have expensive
industrial machines for producing
mouldings and wood flooring. Logosol
changed this 15 years ago when introducing the first planer/ moulder that
was reasonably priced.
The result you get is at least as good as the
products the DIY store offers. But – if you
want to produce wood flooring of the highest
class there are two unsolved problems:
• Wood flooring has to be dried down to
a moisture level of 10-12 percent. Air drying takes a long time and the timber can get
warped and crack.
• Today there is no good small-scale method
for rationally producing tongue and groove
on the
ends of
the flooring boards.
Here is the news from Logosol that will
solve the problems:
• Fence with clamps and moulding knives
for producing end tongue and groove in
MF30. Put two boards together so that their
top sides face each other.. Then you mill both
simultaneously, and you get the exact same
result each time. The knife also makes the
edges beveled.
• The Sauno kiln. It dries the timber using high temperature and steam, exactly as
the compartment kilns at the large sawmills.
The method is also called relax drying. A welltried construction that has been on the market
for almost 20 years. You can only get a genuine
wood feeling from a solid wood floor. Now you
can make the floor yourself.
Make end T&G with the MF30
More fixing plates and
guards are included in
the price.
Safety cutter
Always use the safety cutter on Logosol MF30
and other vertical milling machines. Comes with
40 mm planing knives and depth limiter.
Fence for end T&G
fe
G e n u in e wo o d
58
e li n g !
Designed for Logosol’s vertical milling machine
MF30. In the photo to the left you can see
Bengt-Olov Byström making end T&G with a
home-made fence of wood. Now, we can offer a
super-steady fence with high-quality clamps. The
result you get is significantly better, and the production goes fast. The boards are held up at the
outer ends by a support that is extended with a
45x45mm board. For wide workpieces there is
also a side clamp available.
7100-001-0195
Fence for end T&G, clamps
7100-001-0200
Side clamp
PLANERS & JOINERY MACHINES | Accessories MF30
TB90-92s
Safety knives for end T&G
The safety knives mill end tongue and groove on
two flooring boards in one single operation. At
the same time, the knives make a bevel on the
top side of the boards (the tiny projection in the
middle of the knife, see below). Note that depth
limiters are included.
For the full list for Safety knives for end T&G see pricelist.
All prices are excl. VAT and delivery.
INDUSTRIAL MACHINES
All prices are excl. VAT and delivery.
59
LOGOSOL LAKS
– Belongs in a class by itself
The efficiency and the operational reliability of Logosol Laks frame saw make it belong in a class by itself. For
20 years the frame saw has become more and more improved, not by adding more technology and more smart
functions, but by making small adjustments to the frame angle, the flywheel and the mechanical feeding. This
has rather led to the machine becoming more genuine.
T
he heart in the frame saw is the frame
with up to twenty sawblades that are
pulled up and down with a balanced flywheel as a counterweight. The frame, the flywheel and the mechanical feeding work in perfect harmony, and this can be observed when it
is sawing. The sound level is low and reminds
of a puffing steam locomotive.
Many small-scale sawyers who today use a
circular sawmill, a band sawmill or a Logosol
Sawmill can reach industrial capacity with the
help of the Logosol Laks frame saw.
The logs should be sawn on two sides before they are fed into the Logosol Laks frame
saw so that the timber is edged before it is cut
into boards. This gives a controlled process
and minimal handling of the timber. Without
ado the cants are turned into sawn products.
Pleasant on the working site
The environment around the sawmill is pleasant. It is neat and tidy. What little sawdust
that comes from the thin blades, is transported
away by a relatively small sawdust extractor.
An additional nozzle vacuums the top side of
the cant so that the boards become completely
clean after they have been sawn.
The Logosol Laks frame saw relentlessly
works away, without interruption or trouble,
60
INDUSTRIAL MACHINES | Logosol Laks
hour after hour. To keep it working, the sawn
boards have to be carried away, and a new cant
has to be sawn within only a few minutes. In
practice, the Logosol Laks frame saw is, despite
the low feeding speed, in almost every case the
quickest on the working site.
The blades are replaced quickly
After 8-10 hours of operation, or after about
100 logs, the tungsten-carbide toothed sawblades are to be removed from the frame and
then sharpened with the sharpening machine
that always comes with the Logosol Laks frame
saw.
The blades are mounted in fixed positions
in a comb-shaped holder. This is an excellent
system, which makes replacing blades a quick
operation and ensures that the blades always
come in exactly correct position. The entire
procedure takes less than 20 minutes.
All Logosol Laks are powered by an 11 kW
electric three-phase motor. The model 330 can
also manage on 7.5 kW. If you do not have
access to electricity, all the models can be run
by a 23 hp, environmentally friendly combustion engine. Here we have maybe the world’s
highest capacity per used energy mass; around
500 linear metres/litre of fuel or, with electricity, 100 linear metres/kWh.
The first really efficient sawmills were
frame sawmills. In former times they
did not have the possibility of building a
saw and then equip it with a suficiently
strong motor. Instead, they had to content
themselves with the energy a water wheel
could deliver. The frame saw is a superior
construction that with minimal efficiency
losses and without interruption cuts the
logs.
That this is environmentally friendly is
obvious. In addition, it does not require any
extraordinary installations or fuses. For some
people this is just a matter of saving money,
but in many places around the world it is a
prerequisite.
Invest in a profitable frame saw
Overall, this is a good investment both in
the short and the long run. The Logosol Laks
frame saw is cheap to install and it has high
productivity from the first moment. Due to
the sturdy construction and the smooth running, it does not offer many surPrice (ВЈ)es. The
Logosol Laks frame saw will work faithfully
and keep its value for decades. It always feels
safe with well-tried technique.
All prices are excl. VAT and delivery.
100 m sawn timber per kWh.
Assembly and installation always
included in the price!
Test running and training on site always
included in the price!
Up to 21 perfectly sawn boards straight
off each block of wood.
Remove, sharpen and replace saw blades
in less than 20 minutes. Grinder included!
For the full list for Logosol LAKS
see current price list.
6100-000-0330
Logosol LAKS LL330
TECHNICAL DATA: LAKS 330
TECHNICAL DATA: LAKS 500
TECHNICAL DATA: LAKS 500 Industrie
Weight: 750 kg
Length: 6.6 m
Height: 1,65 m
Width: 1,2 m
Max. number of blades: 12
Sawing height: Max. 180 mm
Frame width: 330 mm
Continuous output: Petrol, 23 hp,
Electric, 7.5/11 kW
Feeding speed: 0.6-1.2 m/min.
Weight: 1100 kg
Length: 9 m
Height: 2,2 m
Width: 1,2 m
Max. number of blades: 20
Sawing height: Max. 260 mm
Frame width: 500 mm
Continuous output: Petrol, 23 hp,
Electric, 11 kW
Feeding speed: 0.5-0.7 m/min.
Weight: 1800 kg
Length: 6,0 m
Height: 1,80 m
Width: 1,2 m
Max. number of blades: 20 mm
Sawing height: Min. 16 mm
Block height: Max. 210 mm
Frame width: Max. 490 mm
Continuous output: Electric 11 kW
Feeding speed: 2 m/min.
All prices are excl. VAT and delivery.
INDUSTRIAL MACHINES | Logosol Laks
61
61
2
1
3
STACK CUTTER PK1500
Cut board stacks cost-effectively – with impressive precision
The stack cutter cross-cuts board stacks
with great accuracy. The 150, 135 or 120
cm long guide bar is steered by the bar
nose holder. The chain is an standard
3/8” cross-cut chain driven by our powerful 5 kW, 3-phase electric motor E5000.
In line with Logosol’s philosophy, we have examined a function that earlier cost a fortune
to accomplish, and produced a smaller and
lighter solution. In this case a stack cutter that
takes the cut linearly vertically, a feature that
normally only found in larger industrial machines. The advantages of cutting linearly is
that the capacity significantly increases both
as regards sawing speed and the size of the
board stack. Logosol’s stack cutter has a relatively low weight since it is mainly made of
aluminium. Three large wheels make it easy to
move the machine by hand. One of the wheels
is adjustable in height, and with the help of
fixed sight the cut can be aligned. With the
stack cutter comes a 2 m long measuring rod,
which is a good means of measuring the length
62
of the stack.
Why spend time cutting the boards one by
one? With Logosol’s stack cutter you cut the
entire board stack at once. Just adjust it to the
desired length and then let the stack cutter do
the job, quickly and efficiently. What used to
take a whole day can now be done in half an
hour; what used to take an entire week you can
accomplish in half a day. It is easy, it is fun and
you can spare time for doing other things.
If you regularly cut large amounts of timber
into length, the easiest way is to do it with a
stack cutter. It saves time. You are also spared
from monotonous tasks that strain your body.
Logosol’s mobile stack cutter does not take up
a great deal of room, and by quickly cutting
the stacks so that they are more easy to handle,
you will save even more space.
As Logosol’s stack cutter is such a small investment, it will be profitable already when
cutting small volumes.
With Logosol’s stack cutter you can cut your
board stacks with an accuracy down to +/- 2
millimetres. This is due to our portal tech-
INDUSTRIAL MACHINES | Stack Cutter PK1500
nique, where the guide bar is fitted at both
ends. The accuracy is significantly better than
comparable stack cutters that have turnable
guide bars, i.e. radial cutting.
*Adaptor for 120 cm/135 cm guide bars is
included.
TECHNICAL DATA PK1500
MEASUREMENTS FOR THE CUT
Width: Max. 1450 mm
Height: Max. 1450 mm
DIMENSIONS
Length: 2600 mm
Height: 1900 mm
Width: 1100 mm
CUTTING EQUIPMENT
Chain pitch: 3/8 inch
Chain speed: 22.5 m/sec.
Weight: 145 kg
Electricity supply: 3-phase, 400 V, 16A
Motor: Moisture protected, IP54, Rated
output 5 kW
8520-000-0150
All prices are excl. VAT and delivery.
CIRCULAR RESAW KS150
Cuts your timber into accurate dimensions.
Logosol’s circular resaw provides you with building timber of exactly
the dimensions you
desire. The circular resaw quickly and easily
gives you high-precision results, and you
can manage the entire
process without help.
TECHNICAL DATA
Weight: 400 kg
Length: 1100 mm
Height: 900 mm
Width: 800 mm
Saw blade diameter: 450 mm
Cutting height: Max. 150 mm
Continuous output: 7.5 kW
Feeding speed: 2-12 m/min.
Electricity supply: 3-phase, 400 V, 32A
Article No.
Product
5210-000-1000
Circular resaw KS150
5210-010-2500
Feed table, price/table
5210-001-0048
Saw blade 450 mm
All prices are excl. VAT and delivery.
What is good about having a Circular Resaw is
that you either saw the
timber yourself, or you
buy timber of a few dimensions, and then you
resaw it to the required dimensions when you actually need it. This way, the
circular resaw facilitates
the handling of building
timber, since there will be
fewer boards that need to
be dealt with before you
are going to use them.
A considerable supply of
large-sized building timber
of different qualities, gives you infinite possibilities of resawing to the dimensions you need
or the material your customers require.
With Logosol’s circular resaw you get highprecision results. You can be certain of getting
the correct dimensions and a fine surface! The
sawing speed is adjustable and is set so that
you can easily manage the operation singlehanded. If you use the highest feeding speed,
however, you will need help in order to manage! The machine works on both seasoned and
fresh-cut timber. The machine’s construction
is based on simple technology and is therefore
extremely reliable in service. The circular resaw is also designed with the stress on personal
safety, so that you can feel safe when working
with the machine.
Large-scale planer mills use bandsaws when
resawing timber. These are really large machines with wide saw blades, impressive capacity, and an extremely small saw kerf. Compared
to the type of band resaw that can be a possible choice for the small-scale wood processor,
Logosol’s Circular resaw has clear advantages.
The circular saw blade cuts straight, and you
can saw tens of thousands of metres without
doing anything about the circular saw blade.
With a bandsaw or a band resaw you have to
replace the saw blade several times during the
same period of time. When it is time to change
saw blade, you replace it with just a few simple
operations!
Rip Saw Assistant
Avoid risks of accidents and save time by
mounting a rip saw assistant behind the blade
of your circular saw.
With a 90 cm or 100 cm saw blade you can
without great difficulty cut really thick logs. In
many cases only a few decimetres on the root
side of the log need to be sawn by the rip saw
assistant. The same saw unit as Logosol E5000.
Weight: 40 kg.
9999-000-6100
INDUSTRIAL MACHINES | Circular Resaw KS150
63
MORE PRODUCTS
64
Г–VRIGT | Stockhantering
All prices are excl. VAT and delivery.
SYSTEM LINUS
– templates for building with plank timber
POTTING SHED, SAUNA, WOODSHED, garden
cabin or garage. Building with plank timber is a
very quick method that provides finished inner
and outer walls for simple structures. With the
right equipment you can construct the framework for a small cabin – in a single day!
The Linus System provides templates to make
things simple. The process is very quick and
produces tight seals. A hand router is used to
produce the saddle in the side of the timber, the
notch is sawn out and the corners are bevelled
using a handheld circular saw. Saw and router
templates are available for 50 and 75 mm thick
planks. Instructions for building with plank timber
are available to download free from logosol.se. The
manual is also useful if you are constructing with
plank timber using large-scale machines, such as
the Logosol Vertical Milling Machine. The easiest
way to produce plank timber is using the PH260 or
PH360. You can find moulding knives and cutter
heads in the Logosol tools catalogue, to be ordered
from Logosol.
Saw
template
Router
template
7500-000-5010
Router template 2”
Complete sauna heater + chimney
7500-000-6010
Router template 3”
Sauna heater with everything you need, including
chimney and ceiling bushing. Required components are
detailed in the plank timber instructions.
7500-000-5000
Saw template 2”and 3”
7001-000-0073
Router bit 6 mm, 45 degrees
7001-000-0068
Sleeve adaptor 6-8 mm
7500-000-7100
SAUNO – Energy-Efficient Drying
IN MOST CASES timber can be left to dry
outdoors for several weeks before being used for
building, but if you want to dry it thoroughly and
quickly, your own kiln can be useful.
The Sauno wood kiln dries
with the aid of steam
0 mm.
Kiln box, messures 2400x1200x60
at high temperatures.
It releases tension and
produces straight lumber
without cracks. The Sauno
unit dries timber ready
for furniture-making in
one week. The kiln box is
ordered separately, but you
can also build your own
box. Assembly instructions
are always included.
FACTS: Vaporising water requires a certain
amount of energy. You recover the same
energy when the water condenses again
before being discharged from the kiln. This
saves energy!
All prices are excl. VAT and delivery.
Kiln box
Complete materials kit for kiln box for Sauno
drying unit. Ready-made panels, all fittings and
drawing. Max. volume 1.2 m3.
6200-000-0015
Drying unit 2 kW
Sauno VT3. Max volume 3.5 m3.
6200-000-0003
Drying unit 4 kW
Sauno VT5. Max volume 12.5 m3.
6200-000-0005
MISCELLANEOUS | Linus System
65
Award Winning Log Turner
Logosol’s patent solution makes log handling easier.
When working with the Logosol Sawmill, you spend about half the time rolling timber to the sawmill and taking
care of the sawn timber. Consequently,
we saw an opportunity to considerably
increase the daily output with an improved equipment for handling logs.
Whenever you are going to roll or turn a log,
no matter if it is on the Logosol Sawmill, in the
forest or on the timber stack, this tool will really
do itself justice. Comparing ordinary cant hooks
with the log turner is the same as comparing the
adjustable spanner with a reversible ratchet. You
keep the log in a firm grip through the whole
process, which makes it impossible for the log
to roll back when you take a new grip. Furthermore, you can turn the log a little bit at a time
and work with your knees, which spares your
back and makes you incredibly strong.
9999-000-2702
The Right Tools for Forest Workers
N EW !
Logosol Timber Winch
The timber winch is a good aid, especially when
you are working alone. The timber winch is used
both when handling timber and when felling
trees, where it also significantly increases the
security. When felling a tree the felling bar on
the timber winch is braced against the tree about
2 m above ground. This ensures that the tree
falls in the planned direction. The felling bar is
detachable.The winch has an automatic reverse
brake mechanism.
Length without felling bar: 155 cm
9999-000-0561
66
MISCELLANEOUS | Log Handling Tools
Mantis Arm
A tool inspired by the strong arms of the praying
mantis. It holds, pulls and turns with good reach.
A remarkably useful gadget that spares your back!
Jab it in and lift, like an extended lifting hook.
Stick it in from below and pull timber along the
ground.
Hook it and roll or turn logs.
9999-000-2710
All prices are excl. VAT and delivery.
Outdoor Hot Tub Kit
For you who have a Logosol PH260, DH410, MH410 or a MF30
WE MAKE IT EASY for you
by providing you with good
instructions and all components
needed except for the timber
and the wood screws. It is both
easy and fun to build, and the
result is really impressive. The
hot tub looks nice in its simplest
design, but if you like, you can
spend a lot of time on decorations, wooden deck and other
conveniences around your new
treasure.
7500-000-7000
THE KIT INCLUDES:
1 book of instructions for building a hot
tub
1 Stove of aluminium
1 grating of stainless steel
1 baffle plate of stainless steel
1 cover with wooden handle
2 galvanized chimney flues
1 galvanized chimney top
1 outlet of stainless steel
2 pipe connection of rubber
1 plastic pipe with bend
1 straight plastic pipe (overflow outlet)
1 hose clamp
2 hoops of aluzink, L:6.7 m
4 bolted joints of lacquered steel
4 screw plates for the bolted joints
4 M12 threaded bars
8 M12 nuts with washers
16 M8 flathead screws with washers and
nuts
10 fleur-de-lis of lacquered steel
6 bench brackets of galvanized steel
Find a Logosol owner near you
Call or pay a visit to a Logosol Owner
Near You!
You can find Logosol Owners from north
to south, from east to west. These owners have agreed to share their experiences
with others interested in Logosol sawmill
or planers/moulders – feel free to call
them and ask questions or arrange for a
demo.
Go to our website and find out if the
Reference Customer Service is available in
your country!
www.logosol.com
All prices are excl. VAT and delivery.
A must have for all
“LOGOSOLERS”
Caps, two models Castromodel or classic, Beanie
hat, Wood pencil, Knife, Thermometer and Folding rule.
See pricelist to order the Logosol gadgets.
MISCELLANEOUS | Outdoor Hot Tub
67
Profit from a good chip set-up
You stand to gain a lot from having a good chip set-up. It will
make your machines more efficient, and you get a better end
result as well as a more pleasant working environment.
Another good reason to give some thought to your chip management
is that chips from both planing and sawing have become a product that
people pay good money for, either as fuel or as litter for pet owners.
Logosol has a full range of products for chip management. In this catalogue we bring you some of the most popular items. Please get in touch
with us if you want some help in adapting an installation to your precise
requirements, or if you want a more advanced system.
Chip sleeve coupling
For connecting a chip extractor to an
electric saw. 100 mm connection.
Chip extractor 4 kW
Chip extractor for PH260 and
PH360. Also suitable for larger chip
installations in joinery workshops.
Extra high vacuum. Exclusive electrical system. 400 V. 16 A.
7000-000-2090
Chip extractor 1.1 kW
Chip extractor suitable for DH410.
2000 m3/hour. 125 mm or 2x100
or 1x125 intake and 125 mm
exhaust. 400 V. Weight: 37 kg
Dust filter
6605-000-0250
Upgrade your chip extractor with
a professional dust filter. Coarse
filter of steel mesh, pleated paper
fine filter.
7805-001-0005
7000-000-2075
Chip sleeve coupling
For connecting a chip extractor
to a log house moulder. 100 mm
connection.
Chip hose
7700-001-0001
100 and 125 mm. Strong and easy
to flex. Fits all Logosol planers.
7000-000-1013
3 m. 100 mm.
7000-000-1017
6 m. 100 mm.
7000-000-1019
12 m. 100 mm
Chip extractor
7020-001-0130
Grip, 100
Chip sleeve coupling
Twin chip bags. Three sleeve couplings for 100 mm hose. 2.2 kW.
7000-000-1021
3 m. 125 mm
7000-000-1023
6 m. 125 mm
100 mm. Fits LM410, KS150, LMPro and PH360.
7020-001-0135
Grip, 125
Chip extractor 3 kW
Chip extractor suitable for PH260.
2500 m3/hour. 4x100 mm intake
permanently attached and 200 mm
exhaust. 400 V. Weight: 42 kg
7000-000-2030
68
7000-000-2080
MISCELLANEOUS | Chip Management
8020-001-0150
All prices are excl. VAT and delivery.
CHIP EXTRACTION
Logosol has a wide range
of chip extraction products,
e.g. dampers, manifolds and
other accessories in a variety
of dimensions. Contact our
knowledgeable sales team,
tel. +46 (0)611-182 85.
Pipe 1.5 m
With rounded joint edge.
100, 125, 200 mm.
7020-001-0025
100 mm
7020-001-0030
125 mm
7020-001-0035
200 mm
Rubber ring
Hose clip
For securing chip hoses to quick
couplings, etc. Suitable for the following hose diameters: 100, 125,
200 mm.
Used as an adapter for joining
simple pipes with a straight foldedback edge. 100, 125, 200 mm.
7020-001-0095
100 mm
7020-001-0130
100 mm
7020-001-0100
125 mm
7020-001-0135
125 mm
7020-001-0105
200 mm
7020-001-0140
200 mm
Sawdust duct 4x100
Suitable for 4 kW fan and PH260.
4x100 mm. Outlet 200 mm.
7020-001-0015
Telescopic pipe 0.27m
Fits on the outside of a cut 1.5 m
pipe, for exact adjustment of final
pipe length. 100, 125, 200 mm.
7020-001-0040
100 mm
7020-001-0045
125 mm
7020-001-0050
200 mm
Hose coupling
Strap
For chip hose. 100, 125 mm.
With sturdy clasp and rubber seal.
100, 125, 200 mm.
7020-001-0070
100 mm
7020-001-0075
125 mm
7020-001-0080
200 mm
7020-001-0110
100 mm
7020-001-0115
125 mm
Sawdust duct 4x100
+ 1x125
Suitable for 4 kW fan and PH360.
4x100 mm and a 125 mm connection to top cutter.
7020-001-0010
Manifold system
Kit. Suitable for 200 mm pipes and
flows out into 4x100mm and a 125
mm connection with cover. Suitable
for both PH260 and PH360. Includes quick coupling for all hoses.
Order hose clips separately.
7020-001-0005
All prices are excl. VAT and delivery.
Pipe bend 90В°
With rounded joint edge.
100, 125, 200 mm.
Damper
For regulating the air flow where
it’s needed most. Also for fully
closing ducts that are not in use.
100, 125 mm.
7020-001-0055
100 mm
7020-001-0060
125 mm
7020-001-0085
100 mm
7020-001-0065
200 mm
7020-001-0090
125 mm
”
Call and tell us what
you need, and we’ll
help you find a solution to suit your specific
requirements!
Richard Nobel,
Logosol Sweden
MISCELLANEOUS | Chip Management
69
Maximize the output
Many of Logosol’s machines have motors that run at maximum output. This means demanding requirements in
terms of uniform and adequate power supply. Heavy-duty and new cables, and central units and connections in
good condition, allow you to get more out of your machines.
Master-slave 1-fas
Single-phase master-slave branch contact with
time delay. Two outlets. Damp protected IP 54.
Portable power outlet
16 A in. 2 x 16 A out plus four single phase
sockets. Residual current device.
9009-020-0005
3-phase Cable 16 A
3-phase cable 16 A, 2,5 mm2. Quality cables for
lower loss of power. 5, 10 or 25 metres.
9009-010-0005
9009-055-0030
Special Cable 16 A
3-phase cable 16 A, 4 mm2. Quality cables for
lower loss of power in longer cables. 5, 10 or 25
metres.
9009-055-0050
1-phase jointing cablel
1-phase extension chord. Environmentally
tolerant cable with moulded and water-tight
contacts. 10 m.
9009-055-0005
3-phase Cable 32 A
3-phase cable 32 A, 6 mm2. Quality cables for
lower loss of power in longer cables. 5, 10 or 25
metres.
Master-slave 3-phase
Master-slave branch contact with time delay.
Double 3-phase and 1-phase outlet. Damp
protected IP 54.
9009-010-0010
9009-055-0070
OLD CABLES MAY BE DAMAGED!
To check if a cable is in good condition,
the current must be measured by an ammeter
at full load. It is not sufficient to measure if
there is voltage in the glove.
When the function of a cable is impaired,
the machine can generally still be used, but
the output is reduced, the motor gets hotter
and the risk of the electronics breaking down
70
MISCELLANEOUS | Electric Equipment
increases considerably.
Unprotected cables can often be damaged
if run over by a vehicle. On hard surfaces
stones can be pressed in, and on soft surfaces
the cable can be stretched out between the
tyres. In both cases the cable gets damaged.
If you are uncertain of the cable’s condition –
replace it!
Plug, 2 way, 3-phase
Robust power plug, 16A 400V 3-phase.
9009-015-0005
All prices are excl. VAT and delivery.
Right Lube on Right Place!
Adhesive Oil
Silicone Spray
This is a further development of common lubricating oil. It is weatherproof, has extremely good
adhesion and, naturally, gives good lubrication.
Give your cutting equipment a good
start every time you change chain!
Uses:
Chain transmissions of the
planers
Springs and the bearing housings of the feed rollers
The bronze bushings and
the line pulley of the Logosol
Sawmill.
Lubrication of chains and
guide bars before assembly.
Hinges
Bicycle chains
Silicone increases the service life
of plastic and rubber parts, and
it works as a lubricant. Gives a
water- and dirt-repellent surface.
Do not use near surfaces that are
to be painted.
Uses:
After having cleaned lacquered
surfaces.
All sliding plastic parts on the
Logosol Sawmill.
Difficult three-phase contacts.
Rubber seals in the car.
9999-000-5100
Universal Oil
This releasing oil is primarily used for cleaning
and preservation. It dissolves dirt and rust, drives
out moisture and leaves a protecting film after
the solvent has evaporated. It is not actually a
lubricant, but it is a must for correct maintenance of the machines.
Uses:
Moulding knives, cutter
heads, shafts and other parts
that are not rust protected.
Lubrication of chains that
have stiffened.
Cleaning and winter preservation.
Maintenance lubrication of
the friction discs of the electric
feeder.
Door locks. Opens frozen car
doors.
9999-000-5105
All prices are excl. VAT and delivery.
Silbergleit
9999-000-5110
Super Flo
A really Hi-tech lubricant. The surface becomes
drier and smoother than when using
ordinary oil, which is a good quality
in dusty environments. Super Flo
can be used on the planer tables
to give smoother feeding through
the machine. In addition, the
teflon does not affect the surface
of timber that is to be painted.
Uses:
Planer tables
The planers’ trapezoidal thread
bars.
The guide rail of the sawmill
Kitchen drawers.
Silbergleit is a proven lubricant for wood processing machines, used by industry and trade users as
well as hobby practitioners. The lubricant makes a
dry and stick free surface that makes wood glide
and machine parts protected against rust.
7500-001-5069
Silbergleit, bottle 1000 ml
7500-001-5067
Silbergleit, can 1000 ml
7500-001-5070
Spray head for bottle
9999-000-5115
Chemistry for
Wood processing machines
Improves function of Wood
processing maschines and
cast iron tables.
Oil for Chainsaw mills
Logosol’s chain oil mixture that has extra good
adhesion.The oil adheres considerably better to
the chain than every other oil we have tested.
This increases the service life of the cutting
equipment.
7500-001-5050
Low Friction Agent
0718-000-1001
Chain oil 1 l
7500-001-5000
Machine Cleaner
0718-000-1010
Chain oil 10 l
MISCELLANEOUS | Lubricants
71
Hand Forged Axes for log building
Gränsfors axes are forged by very professional smiths. The proof
of this professionalism is that they are able to forge axes with
such precision that no supplementary work is needed. It differs
Gränsfors axes from industrially produced axes.
Mortise Axe
Carpenters Axe
Swedish Broad Axe, 1900
Hand forged axe from Gränsfors with 50 cm
long handle. Weight: 1.2 kg. Comes with a
grain-leather sheath.
Hand forged axe from Gränsfors suited o work
in dry timber. 45 cm long handle, weight: 0.9
kg. Comes with a grain-leather sheath.
Hand forged axe from Gränsfors. The axe is
50 cm long and weighs 1.7 kg. Comes with a
grain-leather sheath.
9999-000-0485
9999-000-0465
9999-000-4801
Swedish Drawknife
Scandinavian Forest Axe
Wildlife Hatchet
Hand forged. Suited to process the timber
logs. Total length: 64 cm, face 32 cm, weight:
0.8 kg. Comes with a grain-leather sheath.
A professional axe from Gränsfors for forestry
work in the traditional way. 64 cm long handle,
weight: 1.2 kg. Grain-leather sheath.
A small light axe from Gränsfors that can
manage a lot. 35 cm long handle, weight: 0.6
kg. Comes with a grain-leather sheath.
9999-000-0486
9999-000-4300
9999-000-0466
Log Wizard
An attachment that turns your chainsaw into a
highly efficient debarker. Cutter head, special
guide bar, chain and guard.
72
9999-000-0199
For MS660, bar 3003
9999-000-0195
For small Stihl, bar 3005
9999-000-0190
For Jonsered, Husqvarna
MISCELLANEOUS | Axes
Timber kit
Sawmilling for Woodworkers
Smart Holder sawing horse with Stihl MS391
chain saw. This kit makes cutting timber easier.
Rob Bjorklund and Charlie Griffin deal with all
aspects of small scale sawmilling. The book uses
Logosol’s Woodworker’s Mill as example.
6100-000-1020
4551-134-0513
All prices are excl. VAT and delivery.
A little of everything…
Diamond Stone
Digital Angle Meter
First, set zero at the machine table. Magnets
attaches to the tool and the exact angle is read
digitally!
9999-000-0180
WM180
PLANO GLUE PRESS
Plano is a glue press clamp used to make panels
by gluing together battens or boards. As the
name implies, these come out completely flat
thanks to the smart design that aligns the panel
at the same time as the glued joints are pressed
together. The wall mounting feature also makes
the clamp easier to load with material, especially
if you want to make really wide panels. Panel
maximum width is 1100 or 1250 mm and thickness can range up to 120 mm. The wall rail is 1 m
long and has three clamps in its basic version.
6200-000-0030
Glue Press PLANO1100, Start-up Kit
6200-000-0035
Glue Press PLANO1100, Complements
"A de f in it e
fa vo ur it e w it h
ev er y jo in er !"
Nobex Folding Angle
A full-sized folding square that fits in your
pocket! Clear positions for the various angles.
Fantastic quality feel thanks to the aluminium
handle and stainless steel millimetre scale.
6200-000-0050
For sharpening moulding knifes and hand tools.
Glues to a solid surface. Containing sizes,
medium/fine.
Diamond Grinding Discs
Upgrade your grinder. There is a fantastic difference in grinding result, whether you
have a small, simple chain
sharpener or a highly
advanced automatic
sharpener for bands or
saw chains. Replace your
stone disc by a diamond
disc with high precision!
9999-000-0509
Diamond sharpening disc 145x3.2x22.2
– fits the Maxi Chain Grinder
9999-000-0508
Diamond sharpening disc 145x3.2x16
– fits the Chain Sharpening Robot
9999-000-0516
Diamond sharpening disc 108x23x3.2
– fits the Mini Chain Grinder
M8 CARPENTRY KIT CONTAINS:
• LOGOSOL M8 Sawmill
• LOGOSOL E8000 with E37 Friction Feeder 400 V
• Log House Moulder 4kW with Knife set for 5” logs
(wedges incl.)
• M8 Half sawmill, 2 m
• Versatile Log Fence with Support
• Support Leg with Foot
4507-720-7600
All prices are excl. VAT and delivery.
73
Get improved with a
LOGOSOL-COURSE
Take a course in Sweden and get the most out of your Logosol machines. For a few years now, Logosol has been
running courses in small-scale timber processing. Maybe it’s just what you need to develop your business?
BUILDING LOG HOUSES
Are you dreaming of building your own
house? After 40 hours you can build
houses that will last for 300 years.
PLANER DAY, PH260
Get the most out of your planer/moulder!
It does not matter whether you are a
beginner or a pro. Also suitable for owners
of DH410.
PLANER DAY, SH230
The planer day will make you fit for quick
and efficient planing.
SAWING DAY, LOGOSOL SAWMILL
Become a pro at the Logosol Sawmill!
Get started quickly and learn how to get
the most out of your investment and your
timber!
BASIC COURSE – WOODWORKING
This course applies to beginners, but also to
those who have some degree of experience
of woodworking.
JOINERY MACHINES
A thorough exposition of the main machines
of the joiner’s workshop. Naturally, you will
have the opportunity to test the machines
under professional guidance. This course suits
both those who already have machines and
those who are thinking of buying one.
BUILD YOUR OWN HOT TUB
Build an outdoor hot tub – and take it
home with you! In 3 days you will have
sawn, planed, milled and built your own
outdoor hot tub.
74
”
”
The course was very instructive and worthwhile, and the
instructor, Tycho Loo, was a
great personality with a sound
knowledge of the art of building log houses.
Г…ke Andersson from Karlskoga in
Sweden took a course in building log
houses at Logosol.
I got new tips and tricks on
sawing. I had the opportunity
to try techniques and equipment that I do not have at
home.
Sture Jansson, Sweden took a course
in sawing with the Logosol Sawmill.
For current course programme,
contact Logosol Sweden,
phone +46 (0) 611 182 85
All prices are excl. VAT and delivery.
SAWMILLS | Logosol M7
75
Welcome to
Logosol on the Web
Inspiration and the real joy of wood. Product films and technical data. At logosol.com you will find everything
you need to know about our tools and machines. Why wait till tomorrow – visit us today!
NEW!
.com
oject
r
P
g
n
i
ork
Woodw
J
Free download – manuals,
catalogs and handbooks
Download our manuals and handbooks – completely free of
charge. Here you will find everything from product catalogs
to handbooks on how to build your own hot tub!
Get Logosol
newsletter!
Register with the Logosol
e-newsletter directly online.
Get the latest product
news, videos and the best
offers. The Logosol newsletter is free and has more than 50,000
subscribers all over the world.
76
oin WoodworkingProject.com – your
online wood project
magazine with woodworking ideas, news
and articles from all
over the world. Free
woodworking plans,
woodworking foBENGT-OLOV BYSTRÖM – ONE OF OUR BLOGGERS.
rums, building blogs
and free business advertising for members.
We promise weekly updates with stories about sawmill and wood
planer owners. Read about how they found a new value in wood
and life.
As a member of WoodworkingProject.com, you can publish your
own material on the website and share your ideas. You can create
your own Blog and write about your projects or create your own
Picture Gallery and publish images of your work.
We will update every week with articles, news, videos and pictures.
Visit this website and follow projects from all over the world and
learn milling techniques from some of the world’s most talented
millers and woodworkers. One of our bloggers is Bengt-Olov Byström, founder of Logosol. He is building a new house, and you can
follow his building blog at WoodworkingProject.com.
Welcome!
The Logosol Concept – our promise to you
Peace of mind
Logosol’s peace-of-mind package provides you with a 2 year warranty and the
right to return products within 2 months
from date of delivery if they fail to live
up to your expectations.
comes to product know-how and product use.
Fresh Cut magazine
As a customer you get the Fresh Cut
magazine twice a year. There are also
articles on our website.
Long experience
Access to over 20 years’ experience as
market leader in the field of small-scale
timber processing.
Quick delivery
Very speedy delivery of accessories and
spare parts.
Personal service
It goes without saying that you will
always get the very best personal service.
Information
Constantly updated information with
offers and news several times a year.
Unlimited support
Unlimited telephone support when it
Bengt-Olov Byström
Founder of Logosol
This is how you order
Payment
Please find your local distributor on the back of this catalog,
at www.logosol.com or call Logosol Sweden
+46 (0)611 182 85. Webshops available in selected markets,
see www.logosol.com
•
•
•
usually made by credit card with order
deposit of 10% taken for larger equipment with
balance due on item leaving for delivery
or you can make a bank transfer payment direct into our
account.
You are warmly welcome to contact us!
Damage in transit
If on receipt you discover that something is missing or has
been damaged in transit, you must inform the driver of this
straight away. Please contact us if the carrier does not
accept responsibility for the damage.
Our low freight costs
Our freight prices are based on weight, and we usually deliver
immediately ex-stock. During the peak season delivery times
may be slightly longer. We do not apply any service charges.
www.logosol.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF