fast flexible finishing

fast flexible finishing
solutions for..
the
range
fast
flexible
finishing
finish
digital finishing for digital printers
Bookletmakers & Trimmers:
Page 10, 19, 20
Card Cutters & Creasers:
Page 13
Collators:
Page 24
Creasers:
Page 5, 6, 7, 8, 9, 10
Folders:
Page 7, 8, 9, 11
Guillotines:
Page 17, 18
Joggers:
Page 10, 12
Numbering:
Page 12
Paper Drilling:
Page 22, 23, 24
Perfect Binding:
Page 27
PUR Binding:
Page 16
Punching & Binding:
Page 21, 22
Saddle Stitchers:
Page 25
Shredders:
Page 26
Thermal Binding:
Page 20
UV Coating:
Page 14, 15
Service:
Page 28, 29
www.morgana.co.uk
tel: 01908 608888
fax: 01908 692399
the company..
In less than thirty years Morgana Systems
has grown to become the UK’s leading
manufacturer and supplier of print
finishing equipment.
During the past ten years it has also
established a global reputation as a
leader and innovator in the development
of systems specifically designed to finish
digitally printed output.
Breakthrough products like the
AutoCreaser, the DigiFold and the
DocuMaster all underline Morgana’s claim
to be No. 1 in Digital Print Finishing and
Morgana is the preferred finishing
partner of all the leading manufacturers
of digital print engines.
As well as designing and making its own
equipment, Morgana is also sole UK
distributor for leading finishing
manufacturers including EBA and Ernst
Morgana is now recognised as a leading
Nagel.
innovator in the development of
finishing systems designed specifically
to meet the needs of the rapidly
growing digital print market.
fax: 01908 692399
tel: 01908 608888
www.morgana.co.uk
3
Part of the Morgana showroom
Part of the Morgana Assembly line
Research & Development
Over 80% of Morgana’s UK manufactured
is home to a streamlined manufacturing
been responsible for the constant stream
products are exported to its global
facility, sophisticated R&D and electronic
of new products that Morgana has
network of dealers and distributors.
workshops and a large showroom and
launched in recent years.
Morgana USA was established to provide
exhibition area.
Underpinning the complete Morgana
local support to both the North and
It also houses training facilities and all
range – which now covers all the main
South American markets as well as to
administrative functions.
requirements of both digital and
Canada and now serves national and well
The new building has provided greatly
conventional printers – is a firm
as local Morgana resellers on both
increased manufacturing and assembly
commitment to customer care that
continents.
capability, enabling Morgana to keep
provides all that is best in service and
In 2006 Morgana moved into a new
pace with the rapidly growing demand
support.
headquarters in Milton Keynes, bringing
for its products from home and overseas
all company operations under one roof
markets.
for the first time.
The company has also invested heavily in
This purpose-built building, covering
research and development and its highly
50,000 sq. ft and costing over £4 million,
trained team of design engineers have
Event hosting
4
www.morgana.co.uk
Morgana meeting room
tel: 01908 608888
Testing & Quality Control
fax: 01908 692399
DocuCrease
35cm and 52cm hand creaser designed for
small volume applications, the Morgana
DocuCrease™ is a hand operated machine,
which has adjustable stops for multi
creasing along the length the sheet.
Speed:
n/a
Dimensions:
35 - L 600mm x W 385mm x H 120mm
Dimensions:
52 - L 750mm x W 555mm x H 120mm
Electrical:
n/a
Sheet Size:
35 - 360mm x 350mm
Sheet Size:
52 - 520mm x 520mm
Made in the UK
Sheet Weight: Takes stock up to 0.4mm (approx 400
gsm)* including laminated material
ElectroCreaser
Available in 36cm and 52cm sizes. The
ElectroCreaser is made for the smaller
printer or implant whose requirements
don’t justify a fully automated creaser. It
uses blade and matrix technology for a
quality result and is easily set up. It
provides two standard creasing width
profiles and simplifies jobs needing
multiple creases. Handles stock up to
0.4mm (approx 400 gsm)*
Speed:
n/a
Dimensions:
36 - L 700mm x W 480mm x H 210mm
Dimensions:
52 - L 780mm x W 640mm x H 220mm
Electrical:
240v 50/60hz
Sheet Size:
36 - 435mm x 365mm
Sheet Size:
52 - 520mm x 520mm
Made in the UK
Sheet Weight: Takes stock up to 0.4mm (approx 400
gsm)* including laminated material
DigiCreaser
Fully automatic after feeding, the Morgana
DigiCreaser is a fast, versatile creaser that
can be supplied as a bench-top unit or with an
optional base. Easy to use, with a head-up
display to prompt the operator, the
DigiCreaser uses blade and matrix creasing for
optimum quality and has counting and
batching as standard.
It can store six programmes for repeat work.
Speed:
4000 sheets per hour
Dimensions:
L 870mm x W 570mm x H 590/1070mm
Electrical:
240v 50/60hz
Sheet Size:
630mm x 330mm sheet size
Sheet Weight: Takes stock up to 0.4mm (approx 400
gsm)* including laminated material
Made in the UK
fax: 01908 692399
tel: 01908 608888
www.morgana.co.uk
5
AutoCreaser
First and still best – the Morgana AutoCreaser
was the original automated solution to the
problems caused by the tendency of digitally
printed material to crack when folded.
Speed:
5550 sheets per hour
Dimensions:
L 1168mm x W 457mm x H 990mm
Electrical:
240v 50/60hz
Sheet Size:
700mm x 330mm sheet size
Sheet Weight: Takes stock up to 0.4mm (approx 400
Easy to use, fast and affordable, the
AutoCreaser uses Morgana’s patented blade
and matrix creasing mechanism that is equally
effective with digital output or with crossgrained stock that has been conventionally
printed. The suction fed AutoCreaser’s high
levels of automation ensure consistently
accurate creasing throughout.
gsm)* including laminated material
Made in the UK
AutoCreaser Pro 33
This model is based on the AutoCreaser but
offers many new features and benefits. The
most obvious difference is the intuitive 7”
touch-screen that controls all the main
functions. Using the screen is simplicity itself.
Key in the sheet length (popular sizes are preset), touch the fold type for the finished
product (letter, gate etc) and press the green
button. The AutoCreaser Pro 33 will
automatically calculate where the creases
need to be and set them accordingly.
The productivity has been improved with a
massive 50% increase in speed with no loss of
accuracy. Now running at 8,500 A4 sheets per
hour, and an astonishing 11,000 A5 sph, this is
our most productive creaser to date.
6
www.morgana.co.uk
Speed:
8500 sheets per hour
Dimensions:
L 1168mm x W 457mm x H 990mm
Electrical:
240v 50/60hz
Sheet Size:
700mm x 330mm sheet size
Sheet Weight: Takes stock up to 0.4mm (approx 400
gsm)* including laminated material
Made in the UK
tel: 01908 608888
fax: 01908 692399
AutoCreaser Pro 50
As its name suggests the AutoCreaser Pro 50 is
the ‘big brother’ of the AutoCreaser Pro 33.
Offering the same features and benefits, it
runs at the increased speed of 8,500 sheets
per hour. Similarly it has the “selective speed”
control so the operator can decide on the best
speed to run any given job. The new PosiFeed
feeding system that allows a large pile to be
loaded and fed is used on the AutoCreaser Pro
50 (along with all of our suction fed
machines).
The touch screen offers the user all the
benefits described for the AutoCreaser Pro 33
including the alpha numeric job memory.
Speed:
8500 sheets per hour
Dimensions:
L 1780mm x W 700mm x H 1000mm
Electrical:
240v 50/60hz
Sheet Size:
700mm x 500mm sheet size
Sheet Weight: Takes stock up to 0.4mm (approx 400
gsm)* including laminated material
Made in the UK
The AutoCreaser Pro 50 will crease sheets up
to 700mm x 500mm and like all the Morgana
Creasers, between 0.1mm - 0.4mm in
thickness.
AutoFold Pro
As its name suggests the AutoFold Pro is an
automatic folding machine designed
specifically for the professional digital printer.
It is a free standing folding unit designed for
folding digital stocks using our patented flying
knife technology which was developed to
prevent the scuffing and marking on digital
stocks that are caused by folding using
conventional methods.
The AutoFold Pro is simply wheeled up to ANY
creaser and the height of its vacuum feed
conveyor is adjusted to the exit height of the
creaser.
Controlled by the same innovative touchscreen panel, the AutoFold Pro is instructed
how long the pre-creased sheet is and which
fold to produce.
Both machines are turned on and the precreased sheets from the creaser are delivered
directly onto the AutoFold Pro feed conveyor;
here they are accurately registered to the
fax: 01908 692399
Speed:
6240 sheets per hour
Dimensions:
L 1168mm x W 457mm x H 990mm
Electrical:
240v 50/60hz
Sheet Size:
600mm x 385mm sheet size
Sheet Weight: Takes stock up to 0.4mm (approx 400
gsm)* including laminated material
Made in the UK
side-lay before being folded as programmed
and delivered onto a motor driven shingling
delivery system which will ensure consistent,
high quality stacking.
The beauty of the AutoFold Pro is its
simplicity allowing the user of ANY
manufacturer’s creaser to invest in one and to
improve their productivity and quality
immediately.
tel: 01908 608888
www.morgana.co.uk
7
DigiFold Pro
Speed:
6000 sheets per hour
Integrated Creaser and Folder.
Dimensions:
L 1980mm x W 655mm x H 1265mm
DigiFold has been Morgana’s flagship product
since its introduction in 2001.
Electrical:
240v 50/60hz
Sheet Size:
700mm x 385mm sheet size
In this latest version the speed has been
increased by 20% and we have added the touch
screen as with all Morgana Pro models.
Sheet Weight: Takes stock up to 0.4mm (approx 400
gsm)* including laminated material
This intuitive screen allows the operator to
easily control all the functions of the machine.
Set-up takes seconds and can be as simple as
pressing 3 buttons; stock size, fold type and
the GO button.
READY
Made in the UK
The alpha numeric memory allows jobs to be
named and saved and with a simple search
function, allowing them to be quickly
retrieved.
This most versatile of machines has several
uses: -
Single
Fold
Double
Parallel Fold
Engineering
Fold
Gate
Fold
Closed Gate
Fold
Letter
Fold
Concertina
Fold
• As an integrated creaser/folder performing
both functions in a single pass
• As a “stand alone” creaser when folding is
not required
• As a perforator when neither creasing or
folding is needed
The vastly increased speed now makes the
DigFold Pro a viable proposition for litho
printers who suffer the same cracking
problems as digital printers.
Using our proven patented “flying knife”
technology we can ensure that there will be no
scuffing or marking on digital stocks that are
caused by using conventional folding methods.
Additionally, our DynaCrease mechanism will
give the same high quality crease that our
customers have come to expect, but without
stopping the sheet and therefore significantly
improving productivity.
8
www.morgana.co.uk
tel: 01908 608888
fax: 01908 692399
CardMaster
The Ultimate greeting card
machine...The future has
arrived!
Speed:
9000 sheets per hour
Dimensions:
L 1770mm x W 790mm x H 1040mm
Electrical:
240v 50/60hz
Sheet Size:
460mm x 365mm sheet size
Sheet Weight: Takes stock up to 0.4mm (approx 400
gsm)* including laminated material
The CardMaster is designed for high speed
greetings card creasing and folding. Fast to
setup with job changes achieved in less than
one minute. The operator simply enters the
sheet length and the Morgana CardMaster will
set the creasing and folding positions
automatically. Press the feed switch and the
suction feed system will start creasing and
folding greetings cards at the rate of an
average 150 cards per minute. Jobs can be
stored for automatic retrieval.
Made in the UK
• Bottom suction feed allows continuous
loading.
• Total & batch counting
• Handles litho and digital print.
• Requires only one non skilled operator.
• Uses rotary matrix creasing not rotary
scoring.
• Patented flying knife folding.
• Large diameter grooved rollers prevent
build up of spray powder or toner.
• Computer aided set up with job set up in
under 60 seconds
fax: 01908 692399
tel: 01908 608888
www.morgana.co.uk
9
DocuMaster Pro
The complete digital finishing
system
The original DocuMaster was produced as a
result of a request by one of the Digital Engine
Providers. They had just produced a machine
that delivered pre-collated sets (including
covers of heavier stock) and wanted Morgana
to produce a booklet maker that could finish
them without cracking the book’s spine or the
highly visible centre page spread.
The DocuMaster Pro is the fourth generation
DocuMaster and has all of the original design
attributes. We have added the same touchscreen module as used by the whole range of
Morgana Pro machines and it also benefits
from the new PosiFeed feeding system making
an already impressive feeder, unbeatable.
Targeted specifically at digital printers, the
DocuMaster is a complete finishing system
combining feeding, creasing and high quality
bookletmaking. It enables pre-collated
booklets or brochures to be finished in one
highly automated operation.
The optional variable data camera system used
on the DocuMaster is simplicity itself. The
camera is set to read a fixed point on the
booklet’s cover (or any other page) and that is
1560 books per hour - books
Speed:
5000 sheets per hour - crease
Dimensions:
L 2700mm x W 720mm x H 1185mm
Electrical:
240v 50/60hz
Sheet Size:
460mm x 320mm sheet size - book
Sheet Size:
630mm x 330mm sheet size - crease
Sheet Weight: Takes stock up to 0.4mm (approx 400
READY
gsm)* including laminated material
Made in the UK
all that is required to instruct the system to
make the book, irrespective of the number of
pages. This guarantees set integrity.
• JDF Ready
DocuMaster is the Multi-tasking champion. Use
it as a bookletmaker, a creaser or a perforator
to produce 4pp brochures on heavy card
stock, or to give the perfect bound
appearance to pre-produced booklets using
the optional Square Back, it will happily do
them all.
• Variable data compatible
Near-line or off-line finishing enables your
print engine to operate at maximum speed.
This is often not the case when on-line
finisher's are used.
• Optional Square Back
• Camera recognition system
• Creasing & bookletmaking
• Intuitive 7" touch screen control
• Guaranteed set integrity
Due to the high productivity of the
DocuMaster, work from more than one print
engine can be finished.
Uchida AJ-700 Jogger
Ideal for knocking up misaligned material with
static from some digital print engines. Ideal
accompaniment for the DocuMaster and
creasing range.
•
•
•
•
Speed:
Dimensions:
L 550mm x W 430mm x H 1270mm
Electrical:
240v 50/60hz
Sheet Size:
500mm x 350mm sheet size
Pile Size:
85mm
Variable air jet speed to suit different stocks
Foot pedal or continuous operation
Adjustable jogging angle
Height adjustable
10
www.morgana.co.uk
tel: 01908 608888
fax: 01908 692399
Major Folder
Latest in the range of Morgana folders, the
Major is the successor to the popular Junior
model and features outstanding speed of setup. This suction feed folder takes a larger
sheet size and has a higher operating speed
than its predecessor. It handles output from
both digital and offset presses with equal ease
and is intended for lower volume applications
than the UFO range.
•
•
•
•
Pulsed action suction feed
Counting/batching as standard
Plug-in perforating and scoring
Double sheet/anti-jam detection
Speed:
Variable upto 27000 sheets per hour
Dimensions:
L 1168mm x W 493mm x H 1280mm
Electrical:
240v 50/60hz
Sheet Size:
648mm x 365mm sheet size
Sheet Weight: 56gsm - 240 gsm approx
Made in the UK
DocuFold
The last word in automated suction feed
folding and the perfect partner for ‘ondemand’ digital printing. Once the paper is
presented, sensors automatically register its
length, while simple controls adjust fold
plates as required. Settings can be simply
memorised for repeat work. Counting and
batching are standard features.
Speed:
12,000 - 17,000 sheets per hour
Dimensions:
L 1210mm x W 520mm x H 1280mm
Electrical:
240v 50/60hz
Sheet Size:
450mm x 365mm sheet size
Sheet Weight: 56gsm - 240 gsm approx
Made in the UK
Plug-in Perforating Unit standard on both
machines.
UFO Folders
Acknowledged as the finest suction feed
folder in its class, the Morgana UFO is a best
seller throughout the world. The product has
been constantly refined and improved over
the years and now features a ‘head-up’
display making it easy to operate the folder
from either side and providing the operator
with a wealth of information at a glance.
•
•
•
•
•
•
•
Fast, easy set-up
Counting/batching as standard
Side lay register
Roller pressure settings
Combination fold rollers
Crossfold unit available
Pulsed action suction feed
fax: 01908 692399
Speed:
Variable upto 30,000 sheets per hour
Dimensions:
L 1910mm x W 785mm x H 1460mm
Electrical:
240v 50/60hz
Sheet Size:
640mm x 457mm sheet size
Sheet Weight: 56gsm - 240 gsm approx
The UFO 1 can have an optional crossfold
Made in the UK
tel: 01908 608888
unit to provide a greater variety of folds.
www.morgana.co.uk
11
FRN5 Rotary Numberer
The rotary action FRN5 numberer is the ideal
unit for lower volume applications and shares
many of the same features as the FSN,
including the ability to feed SRA3 landscape or
portrait. The ergonomic design allows both
the feed and delivery tables to be stored
when the machine is not in use.
Speed:
5500 sheets per hour
Dimensions:
L 900mm x W 780mm x H 1110mm
Electrical:
240v 50/60hz
Sheet Size:
460mm x 460mm sheet size
Sheet Weight: Takes 6-part carbonless sets
Collars Max:
4
Speed:
9000 sheets per hour
Dimensions:
L 1168mm x W 457mm x H 990mm
Electrical:
240v 50/60hz
Sheet Size:
460mm x 460mm sheet size
• Fast, simple set-up
• Numbering, perforating, scoring anywhere
on the sheet
• Fully mobile with foldaway design
Made in the UK
FSN Rotary Numberer
The FSN is a heavy duty, high volume, suction
feed numberer featuring electronic pulsing
and feeding from the bottom of the stack so
that loading can be done ‘on the run.’ Positive
control of paper from feed to delivery ensures
consistent register throughout every run. The
FSN takes up to 8 parallel or convex
numbering heads.
Sheet Weight: Takes 7-part carbonless sets
Collars Max:
8
Speed:
n/a
Dimensions:
L 700mm x W 500mm x H 900mm
Electrical:
240v 50/60hz
Sheet Size:
700mm x 500mm sheet size
• High power vacuum and air pump
• Numbering, perforating, scoring
anywhere on the sheet
Made in the UK
• Fully mobile
System 90 Jogger
The Morgana Jogger is an essential piece of
equipment for printers who need to ‘knock
up’ paper or carbonless sets in sizes up to
SRA2. It combines well with the AutoCreaser,
Morgana rotary numberers, DigiCoater or
Uchida collators, depending on the
application.
The height of the Jogger can be adjusted as
can the angle.
12
www.morgana.co.uk
Made in the UK
tel: 01908 608888
fax: 01908 692399
CardXtra
Speed:
140 business cards per minute
Business Card Cutter
Dimensions:
L 1032mm x W 615mm x H 917mm
Designed to cut business cards printed
digitally or conventionally, the Morgana
CardXtra is a fast and versatile easy to use
business card cutter which is ideal for today’s
on-demand environment.
Electrical:
240v 50/60hz
Sheet Size:
450mm x 320mm sheet size
Sheet Weight: 105gsm - 375gsm
The CardXtra has unique mark recognition
sensors allowing the cutter to follow the print
ensuring consistent accuracy.
Various cutters available. Picture below
shows optional postcard cutter.
There are several programmes
available to store your common jobs
for repeat work. Optional, fully
interchangeable cutters available for
postcards etc.
• Fast set-up
• Takes A3 plus sheets
• Suction feed
• Wide range of card formats
• Quick change, rotary blades
EPS & PDF templates available for download
from www.morgana.co.uk
CardXtra Plus
Integrated cutting and creasing
machine.
The CardXtra Plus has been manufactured to
meet the needs of the growing number of
digital printers who have asked for a highly
accurate, low cost, easy to use
multifunctional finishing device.
fax: 01908 692399
140 business cards per minute
Dimensions:
L 1300mm x W 600mm x H 950mm
Electrical:
240v 50/60hz
Sheet Size:
450mm x 320mm sheet size
Sheet Weight: 105gsm - 375gsm
With run lengths becoming shorter and jobs
being personalised or printed with no “overs”
it is essential to have an accurate, easy to use
reliable finishing system; and that is exactly
what the CardXtra Plus is.
It can feed sheets up to SRA3 in size and can
trim, cut and crease in multiple positions. The
accuracy of the new CardXtra Plus is now the
best available in the market and significantly
better than that of many more expensive
units. +/- 0.1mm accuracy versus +/- 0.7mm
or +/- 0.5mm for the largest volume selling
machines that existed previously makes the
CardXtra Plus between 5 and 7 times more
Speed:
can now be offered as a “while you wait”
service.
accurate and provides a much better result
for your customer and investment for your
business.
When producing business cards an average run
of 250 cards can be finished in less than 2
minutes. A small job such as this that would
previously have needed 18 cuts on a guillotine
tel: 01908 608888
The versatile CardXtra Plus now has the ability
to take SRA3 sheets, trim them to A3 and
crease them to produce finished A4 4 page
brochures. Equally easily it can finish the job
to A4 which can then be creased to make 4
page A5 leaflets or multiple creases for a wide
variety of applications.
The options are endless and with the million
cut guarantee the CardXtra Plus will be
serving your business for many years to come.
www.morgana.co.uk
13
DigiCoater 33
The new range of UV coaters are now
available in a 33 and 50cm widths. The
DigiCoater 33 is available with gloss and matt
coatings online and integral auto wash. It has
full touch screen technology for simple
operation and is Ideal for the SRA3 market
with a small footprint. The optional Digi-IR
unit is available for wax based toners. A
suction feeder is available as an option.
Morgana recommend external venting for
this product. As an alternative, the XTractor is available which is an internal
filtration/fume extraction system. See
overleaf.
14
www.morgana.co.uk
7.5 - 30 metres per minute
Dimensions:
L 1500mm x W 700mm x H 1045mm
Electrical:
240v 50/60hz
Sheet Size:
330mm x 762mm sheet size
Sheet Weight: Takes stock up to 0.4mm (approx 400
gsm)*
DigiCoater 50
The big brother to the DigiCoater 33. The
DigiCoater 50 has all the benefits of the
smaller model but with the extra width for
larger sheet sizes. It has the ability to apply
an aqueous primer (for uncoated media to be
printed). Its patented primer coating station
solves printing media consistency issues. Now
you can primer-coat uncoated media to give
superior and consistent printing results,
minimise set up times and limit colour
correcting to a minimum. Gloss or matt UV
coatings are available from separate tanks.
The DigiCoater 50 has full touch screen
control and complete adjustment of coating
thickness. All this in the footprint of less than
half that of traditional devices.
The optional Digi-IR unit is available for wax
based toners. A choice of feeders are
available to suit all applications.
Speed:
Speed:
7.5 - 30 metres per minute
Dimensions:
L 1707mm x W 1000mm x H 1200mm
Electrical:
240v 50/60hz
Sheet Size:
500mm x 762mm sheet size
Sheet Weight: Takes stock up to 0.4mm (approx 400
gsm)*
Textured Finish
Gloss Varnish
A gloss coating can add impact to the print,
especially in sales or promotional material,
where optimum presentation of images is
important.
A textured finish allows the designer to create
a special effect on the printed surface. This is
achieved by way of a textured roller.
Protection
Matt Varnish
Applying a UV coating protects the printed
image as well as enhancing it. This is essential
for anything that will be frequently handled or
submitted to the rigours of the postal system.
A matt varnish is sometimes used to ‘soften’
the appearance of a printed image. Small text
in a leaflet or booklet can be easier to read
on a surface coated with matt vanish as the
coating scatters the light and reduces glare.
The DigiCoater is compatible with most print
technologies including liquid ink and toner
based digital engines, photo, ink jet,
conventional litho digital and more.
tel: 01908 608888
fax: 01908 692399
X-tractor
The cost effective extraction solution for the
DigiCoater when the location of the coater
and/or the building construction do not allow
exterior venting.
Speed:
400m3/hr capacity
Dimensions:
L 380mm x W 380mm x H 590mm
Electrical:
240v 50/60hz
Sheet Size:
n/a
Sheet Weight: n/a
The X-Tractor fits neatly between the feeder
and the DigiCoater unit and simply uses a
standard 13amp supply.
The unit is extremely quiet in operation and
requires minimum maintenance with sensors
telling you when cleaning or replacement is
due.
•
•
•
•
Blower with high airflow
Low cost replacement filters
Optional VOC gas sensors
Optional interface with stop/start, filter
blocked and extractor failure signals
Digi-IR
Speed:
n/a
Designed for use on output from digital
engines where the toner has a waxy base.
Dimensions:
33 - L 300mm x W 480mm x H 900mm
Dimensions:
50 - L 300mm x W 700mm x H 900mm
The Digi-IR re-activates the surface of the
toner prior to coating to ensure perfect
adhesion of the varnish. The unit is available
as an option if required.
Electrical:
240v 50/60hz
Sheet Size:
n/a
Sheet Weight: n/a
Available in 330 & 500 widths to suit either
the 33 or 50 coaters.
fax: 01908 692399
tel: 01908 608888
www.morgana.co.uk
15
Adventure PA
Glue Type:
PUR
PUR Binding strength redefined!
Speed:
200 cycles per hour
Dimensions:
L 1320mm x W 900mm x H 1150mm
Electrical:
240v 50/60hz 30amp
These models set new standards in the field of
single clamp perfect binding between 200 to
500 cycles per hour. The Morgana ADVENTURE
and EXPLORE are unique perfect binding
machines equipped with a sophisticated inbuilt
closed PUR application system for spine and
side gluing of books up to 50mm thick.
• Touch screen operation complete with
automatic format change. Format change
by data input into job memory (50
programmes)
• Electric opening and closing of clamp
• Binding length (spine) from 120 up to
350mm
• Spine preparation by sophisticated milling
device
• Paper chip extractor
• Unique sophisticated inbuilt closed PUR
application system for spine and side gluing
with automatic glue cut-off
Binding Length: 120mm - 350mm
Binding Height: 90mm - 310mm
• Professional inbuilt closed PUR-application
system for spine and side gluing, complete
with automatic glue cut-off
• Suction cover feeder with inbuilt scoring
device
16
www.morgana.co.uk
2mm - 50mm
Glue Type:
PUR
Speed:
500 cycles per hour
Dimensions:
L 2550mm x W 850mm x H 1300mm
Electrical:
3 Phase+E+N 400v 50hz 32amp
• Automatic cover clamping
• Open flat binding
Short make-ready times and easy operation
allow the production of large or small runs
economically and quickly. The new Morgana
ADVENTURE and EXPLORE models meet today’s
market requirements for professional
equipment giving high quality, high strength
binding.
Explore PA
• Operator Touch-Screen
• Professional jogger at book block feeding
position
• Electric opening and closing of clamp
• Book block formats: DIN A 5 to DIN A3
• Cover sizes accordingly to book block
formats, weight 120 – 350 g/m2
• Sophisticated milling device adjustable
from 0-3 mm with inbuilt slitting points
and complete with paper dust vacuum
system
Spine Size:
Binding Length: 148mm - 430mm
Binding Height: 105mm - 310mm
Spine Size:
2mm - 50mm
• Automatic cover clamping with timer
control
• Delivery by chute onto conveyor or
optional vertical stacker
• Open flat binding
tel: 01908 608888
fax: 01908 692399
EBA435M
This powerful EBA 435M office
guillotine for manual operation is
perfect for effortless cutting and
trimming of paper stocks or bound
brochures up to 40mm in height.
Features include: 430mm cutting
length, 40mm cutting height, solid all
metal construction, solid steel blade
carrier, manual paper clamp, spindle
driven backgauge with calibration
ring. Bench top model. Picture shows
optional stand.
EBA435A
The EBA 435A with a new digital
display and power clamp, offers high
cutting performance which is easy and
safe to operate.
Features include: Electro-mechanical
blade drive, powered paper clamp,
spindle driven backgauge with digital
display for precise positioning,
precision side lay, optical cutting line
with LED's. Available as a bench top
model or with optional stand or
cabinet. Optional cabinet shown.
EBA480EP
This is the perfect guillotine for the
budget-conscious smaller printer or
implant who needs programmatic
control for on-demand operation.
It has a 48cm cutting width, optical
cutting line indicator, accepts a pile
height of 8cm and features an electro
mechanical blade drive and power
back gauge. Programmatic operation
allows 99 jobs to be stored for repeat
work with 99 cutting positions within
each programme.
fax: 01908 692399
tel: 01908 608888
Speed:
n/a
Dimensions:
L 880mm x W 830mm x H 1090mm
Electrical:
n/a
Cutting Size:
W 430mm x D 390mm
Pile Height:
40mm
Programmes:
n/a
Speed:
n/a
Dimensions:
L 640mm x W 695mm x H 1080mm
Electrical:
240v 50/60hz
Cutting Size:
W 430mm x D 390mm
Pile Height:
40mm
Programmes:
n/a
Speed:
n/a
Dimensions:
L 755mm x W 970mm x H 1360mm
Electrical:
240v 50/60hz
Cutting Size:
W 475mm x D 450mm
Pile Height:
80mm
Programmes:
99 with 99 steps
www.morgana.co.uk
17
EBA 551 (LT)
The 551 has an electronic photocell safety
guard protecting the front table area.
Hydraulic precision drive for blade and
clamping, electronically guarded front table
area by safety cover, a manually operated
hand wheel for fine adjustment of the back
fence and an electronic digital display with an
accuracy of 0.1mm.
Speed:
n/a
Dimensions:
L 1630mm x W 1400mm x H 1370mm
Electrical:
240v 50/60hz
Cutting Size:
W 550mm x D 570mm
Pile Height:
95mm
Programmes:
99 with 99 steps
Speed:
n/a
Dimensions:
L 2100mm x W 1600mm x H 1335mm
Electrical:
3 Phase+E+N 400v 50hz 16amp
Cutting Size:
W 720mm x D 720mm
Pile Height:
80mm
Programmes:
99 with 99 steps
It has a large cutting capacity, an infinitely
adjustable clamping pressure with display and
a foot clamp for pre-pressing. There is also an
optical and mechanical cutting line indicator.
Side tables at the right and left side are
optional, as is a front and rear air table (LT
versions).
EBA 721 LT
A professional power guillotine that has all the
productivity features you would expect from
EBA.
It offers precise cutting and trimming up to
720mm wide with an insertion depth of
720mm. Standard equipment includes a fully
programmable control module for the power
back fence, a front and rear air table and an
electronic photocell safety guard protecting
the front table area. Optional right and left
side tables are available as shown fitted in the
picture. The programme facility enables 99
programmes to be memorised with 99 cuts per
step. Preset cut programming available along
with a step and repeat facility for multiple
cuts.
As a first step towards making the EBA range
JDF compatibile, the 721 LT has the option of
a computer interface that will allow the
guillotine to be programmed directly from a
computer or via a usb stick.
18
www.morgana.co.uk
tel: 01908 608888
fax: 01908 692399
Foldnak M2
Ideal for implants or low volume on demand
applications, the Foldnak M2 is an entry-level
model that will produce finished booklets
from A6 to SRA3. Can be
supplied as a bench-top
or free-standing unit.
Can take flat staples
and loop staples.
500 booklets per hour
Dimensions:
L 490mm x W 510mm x H 290mm
Electrical:
240v 50/60hz
MIn Size:
148mm x 210mm
Max Size:
330mm x 448mm
Max Thickness: 1.5mm (approx 15 sheets x 80gsm)
Foldnak 40
This highly popular mid-range machine
produces 100 page booklets of 80 gsm paper.
Simple to use and fast to set up, the Foldnak
40 is fitted with sensors that check the
correct alignment of pages for optimum
accuracy It produces booklets in sizes to SRA3.
Can take flat staples and loop staples.
Staples:
26/6, Ri 26/6 (Loop)
Speed:
1500 booklets per hour
Dimensions:
L 1020mm x W 600mm x H 880mm
Electrical:
240v 50/60hz
MIn Size:
120mm x 210mm
Max Size:
325mm x 450mm
Max Thickness: 2.5mm (approx 25 sheets x 80gsm)
Foldnak 8 & Trimmer
The Foldnak 8 is the flagship of the range,
offering stapling positions at 80, 180 and
240mm centres and featuring ‘Power
Clenching’ for a truly professional finish.
It is seen here working on-line with a Foldnak
trimmer, which trims the fore-edge of the
document as well as pressing the spine for an
extra sharp fold. It will also operate on-line
with bench-top collators.
Staples:
26/6, 26/8 S, Ri 26/6 (Loop)
Speed:
2000 booklets per hour
Dimensions:
L 1270mm x W 610mm x H 870mm
Electrical:
240v 50/60hz
MIn Size:
105mm x 210mm
Max Size:
325mm x 450mm
Max Thickness: 2.5mm (approx 25 sheets x 80gsm)
Staples:
The trimmer can be purchased separately and
added to the Foldnak 40 or Foldnak 8.
26/6, 26/8 S, Ri 26/6 (Loop)
Morgana is the sole UK distributor for
Foldnak bookletmakers – the world’s best
selling range made by Ernst Nagel. The
bookletmakers cover a wide spectrum of
applications. Morgana recommends genuine
Nagel staples. Flat, looped and special
hardened staples available.
The ‘Power Clenching’ mechanism on the
Foldnak Compact ensures the highest quality
professional finish.
fax: 01908 692399
Speed:
tel: 01908 608888
www.morgana.co.uk
19
Foldnak Compact
This machine is unique in its class combining a
bookletmaker with an integrated Trimmer. It
has a total length of 1.05 m without the belt
stacker making it very compact. With an
unrivalled wide range of formats (from 105mm
x 210mm up to A3+) and a very short set-up
time, it is particularly suited for small,
medium and frequently changing run lengths
in digital or offset printing. It is a highly
efficient solution for digital printers who need
a quick and flexible production of booklets.
Speed:
2000 booklets per hour
Dimensions:
L 1030mm x W 710mm x H 860mm
Electrical:
240v 50/60hz
MIn Size:
105mm x 210mm
Max Size:
325mm x 450mm
Max Thickness: 2.5mm (approx 25 sheets x 80gsm)
Bindomatic 101 DFS
Presentation Binding
System
This high-speed, high-quality presentation
binding system is capable of serving several
high-speed copiers or printers at the same
time. Despite its compact, desktop design, it
will produce upto 1400 A4 documents per
hour. It uses a cover selector to determine the
correct cover width and allows documents of
different sizes to be bound in the same cycle.
The finished documents are smart and durable
with clear Perspex covers and a spine that is
reinforced with binding gauze for extra
strength. Covers are made with a double
crease so they will open flat.
Staples:
26/6, 26/8 S, Ri 26/6 (Loop)
Speed:
1600 documents per hour
Dimensions:
L 475mm x W 511mm x H 360mm
Electrical:
240v 50/60hz
Sheet Size:
A4
Spine Widths: 1.5mm - 15mm
Quality binding has never been easier. The
cover selector indicates the correct spine
width and, once the sheets are inserted into
the cover, the 101 automatically binds the
document. Ready-to-use documents are
delivered to the output tray.
20
www.morgana.co.uk
tel: 01908 608888
fax: 01908 692399
Rhin-o-Tuff Punching and
Binding System
HD 7700 Ultima/HD 8370
This new heavy-duty desk-top punch has a
capacity of 35 sheets of 80gsm stock. An
overload trigger prevents the operator from
attempting to punch too many sheets and a
reversing function eliminates jams. The unit
will punch documents up to 350mm wide, well
in excess of A4.
The punch may be operated either with a foot
pedal to leave the hands free or with a
conveniently positioned palm switch.
This semi-automatic wire inserter/closer is
capable of closing documents with a 3-1 pitch.
It allows documents up to 14mm to be bound
using double loop wire and can easily be
adjusted to accept different wire sizes.
Operation is simple, using a magnetic back
guide to hold the wire in place. The punched
work is then inserted over the wire and the
handle is used to close the wire around the
document – all in one operation.
Speed:
90 cycles per minute
Dimensions:
L 547mm x W 534mm x H 216mm
Electrical:
240v 50/60hz
Sheet Size:
356mm
Capacity:
35 sheets of 80 gsm approx
Full range of dies available.
Picture shown with HD8370 mounted on top of the
punch unit. HD8370 can be used as a stand alone
closer.
Apes 14 Stacker
Speed:
n/a
The APES automatic paper ejector and
stacker can increase the productivity of the
heavy-duty Rhin-o-Tuff punches by as much as
50%.
Dimensions:
L 965mm x W 559mm x H 381mm
Electrical:
240v 50/60hz
Sheet Size:
140mm - 356mm
The APES-14, (Automatic Punching & Ejection
System) enables paper that has been punched
on the popular Rhin-o-Tuff HD range of
punches to be automatically ejected and
stacked in one pass. This greatly reduces
manual paper handling and enables the user
to increase output for a minimal capital
outlay. Existing Rhin-o-Tuff users will also
benefit as the new unit is easily fitted to
their machines.
Capacity:
35 sheets of 80 gsm approx
Morgana is the exclusive UK distributor for
Rhin-o-Tuff, a range of punching and
binding equipment noted for its flexibility
and productivity. Unlike other systems, all
Rhin-o-Tuff Punches feature interchangeable
dies enabling them to produce hole patterns
for plastic comb, plastic spiral, wire and
Velo Bind systems. The dies can be changed
in seconds without special tools.
The stacker ejector will take up to 1,000
sheets of paper in sizes in excess of A4 and
complements the wire inserting and binding
products in the Morgana range.
fax: 01908 692399
tel: 01908 608888
www.morgana.co.uk
21
Pics-A-Lift
This time saving device works alongside the
HD-7700 punch and automatically extracts the
optimum number of sheets to be fed to the
punch.
Speed:
n/a
Dimensions:
L 470mm x W 406mm x H 356mm
Electrical:
240v 50/60hz
Sheet Size:
140mm x 356mm sheet size
Sheet Weight: Takes stock up to 0.4mm (approx 400
• Highly accurate
• Maximises speed of punching operation
• Adjustable according to paper weight or
thickness
gsm)* including laminated material
Citoborma by Ernst Nagel.
Drill diameter: 2mm - 9mm
Over 40,000 Citoborma drills have been
installed worldwide – a testament to their
reliability, versatility and value for money.
The range includes models of different sizes
and specifications to suit all applications and
to meet all budgetary requirements.
Heads:
1
Dimensions:
L 470mm x W 470mm x H 480mm
Electrical:
240v 50/60hz
Sheet Size:
350mm x 250mm
Max Thickness: 50mm
Stops:
Fully adjustable and self-centering
Citoborma 111
The Nagel electric drill easily and safely
handles stacks of paper up to
50 mm thick and has preset hole patterns.
Drilling takes place with no effort, efficiently
and quickly.
22
www.morgana.co.uk
tel: 01908 608888
fax: 01908 692399
Citoborma 190
Drill diameter: 2mm - 20mm
The latest generation is the Citoborma 90
Series, which adds greater diversity to the
range with features such as the unique
FlexoDrill sliding table and the ability to set
up pre-programmed drilling patterns in
seconds. All models in the 90 series take a
60mm pile height and can be supplied for
either bench top or treadle operation. This
single spindle model is ideal for the smaller
printer and represents outstanding value
for money.
The Citoborma flexible sliding table provides
automatic release after each stroke and takes
paper widths up to 470mm. It provides
adjustable throat depth and centring of the
paper stack.
It can be fixed in any required position and
has a retractable left side stop for smooth and
fast access. The individually programmed
tabulator bars are interchangeable.
Heads:
1
Dimensions:
L 640mm x W 600mm x H 700mm
Electrical:
240v 50/60hz
Paper Width:
470mm
Max Thickness: 60mm
Stops:
Citoborma 290
Fully adjustable and self-centering
Drill diameter: 2mm - 20mm
This popular drill has two spindles at fixed 80
mm centres but can also be supplied in a
version with self-centring spindles that can
vary in position between 45 and 160mm.
Heads:
2
Dimensions:
L 640mm x W 600mm x H 700mm
Dimensions:
L 640mm x W 600mm x H 1580mm T
Electrical:
240v 50/60hz
Paper Width:
470mm
Max Thickness: 60mm
Stops:
Fully adjustable and self-centering
290 shown with optional treadle unit.
fax: 01908 692399
tel: 01908 608888
www.morgana.co.uk
23
Citoborma 490
Drill diameter: 2mm - 35mm
This powerful, heavy-duty drill takes from 2 to
6 drilling heads. It features 2-speed drilling
and the ability to make paper position
adjustments in seconds. Options include aircooling for drill bits and the ability to fit
multi-spindle heads for work where
the distance between centres is too
close for adjacent heads. 3 phase
power requirement.
Heads:
1-6
Dimensions:
L 710mm x W 770mm x H 1390mm
Electrical:
Sheet Size:
3 Phase+E+N 400v 50hz 16amp
460mm x 270mm
Max Thickness: 60mm
Stops:
Fully adjustable and self-centering
The World’s Best Selling Drills.
Full range of drills and
accessories for the full
range of Citoborma Drills
Uchida Collators - UC-1100
Offering the best price/performance package
on the market, the Uchida UC1100 collator is
compatible with most floor standing
bookletmakers, including the Foldnak range.
The UC-1100 is a ten-station collator taking a
sheet size in excess of SRA3 and running at
speeds to 3600 sets per hour. Features crisscross stacking, automatic bin linking, bin
programming, miss & double detection and
automatic cover inserting as standard.
Speed:
Upto 3600 sets per hour A4
Dimensions:
L 740mm x W 545mm x H 1056mm
Electrical:
240v 50/60hz
Min Size:
95mm x 150mm
Max Size:
328mm x 469mm
Sheet Weight: 35gsm - 210gsm station 1 & 10
Sheet Weight: 35gsm - 160gsm station 2 to 9
A useful addition to the UC1100 is the
Morgana Jogger (see page 28), designed for
users who need to collate and knock up SRA3+
carbonless paper.
Can be used with an optional SP-21
stapler/punch unit.
Uchida collators have great
reliability and a range of high
productivity features.
24
www.morgana.co.uk
Picture shows UC1100 control panel.
tel: 01908 608888
fax: 01908 692399
Multinak Staplers
Power and treadle operated
staplers
The range of Multinak staplers from Nagel
gives the choice of treadle or power operation
for both saddle and flat stitched work.
Heads:
2
Dimensions:
L 750mm x W 600mm x H 1280mm
Electrical:
n/a
Staple Length: 6mm - 18mm (A heads)
Staple Length: 6mm - 30mm (B heads)
Multinak FS
The Multinak FS is designed for those working
on a smaller budget. Treadle operated, it will
handle the same document thickness as the
powered version and features twin heads.
Multinak S
The Multinak S is a power operated stapler
which features twin heads and will staple
documents from just 2 sheets up to 27mm
thick. Easy to set up, it incorporates Nagel’s
famous ‘Power Clenching’ mechanism to
ensure strong, perfectly formed stitches each
time.
Max Size:
325mm x 450mm
Thickness:
2 sheets - 270 sheets 80gsm
Staples:
24, 26, 30 + Loop (50, B50 B heads)
Heads:
2
Dimensions:
L 750mm x W 600mm x H 1100mm
Electrical:
240v 50/60hz
Staple Length: 6mm - 18mm (A heads)
Staple Length: 6mm - 30mm (B heads)
Max Size:
325mm x 450mm
Thickness:
2 sheets - 270 sheets 80gsm
Staples:
24, 26, 30 + Loop (50, B50 B heads)
Multinak S and FS: Power clenching
fax: 01908 692399
tel: 01908 608888
www.morgana.co.uk
25
EBA High-Volume
Document Shredders
EBA 5141 C/S
Equipped with an efficient, high security
cutting mechanism, this is a powerful office
shredder that takes up to 55 A4 sheets at a
time. It is fitted with a large, 225 litre
capacity shred bin.
EBA 5146
The EBA 5146 series provides feeding for both
flat sheets and crumpled paper; the latter via
a hopper. Users can choose between straight
and cross-cut shredding up to security level 4.
Total front access allows the unit to fit into a
surprisingly small space and it has a 230 litre
capacity bin.
EBA 6040
These heavy-duty shredders feature conveyor
belt feeding for both flat and crumpled
paper. Models are available to take anything
from 80 to 160 A4 sheets and the robust
cutting mechanism is unaffected by soft
metal objects such as ring binders. Features
include very high shredding speeds and a
design that allows the side tables to be
removed when not in use.
This range of superbly engineered EBA
shredders has been carefully selected to
provide high-volume users with a choice of
models to suit their particular document
security needs. There are models suitable
26
www.morgana.co.uk
for processing different types of
documents, at different speeds and using
either straight cut or, for maximum
security, cross-cut shredding techniques.
Avoiding the security risks associated with
tel: 01908 608888
Sheet Width:
405mm
Dimensions:
L 640mm x W 590mm x H 1010mm
Electrical:
240v 50/60hz
Shred Type:
Cross cut/straight
Security Din:
S = 2, C = 3
Capacity:
33-35mm S, 23-25 C
Sheet Width:
460mm
Dimensions:
L 740mm x W 765mm x H 1700mm
Electrical:
3 Phase+E+N 400v 50hz 16amp
Shred Type:
Cross cut
Security Din:
3/4
Capacity:
55-60mm C, 29-34 C
Sheet Width:
410mm
Dimensions:
L 690mm x W 1700mm x H 1440mm
Electrical:
3 Phase+E+N 400v 50hz 16amp
Shred Type:
Cross cut/straight
Security Din:
S = 2, C = 3
Capacity:
75-95mm S, 68-78 C
off-site shredding, the EBA range ensures
immediate and economical destruction of
documents on your own premises. Full
range of consumables available.
fax: 01908 692399
KB2000S Perfect Binder
Glue Type:
Hot Melt Adhesive
A high performance Perfect Binder
ideal for digital stocks
Speed:
320 books per hour
Dimensions:
L 1350mm x W 500mm x H 1285mm
The KB 2000S is the updated version of the
best selling KB 2000 which it replaces.
Electrical:
240v 50/60hz 30amp
Spine Length: 60mm - 310mm
It remains the ideal perfect binder for short to
medium run lengths and it can be made ready
in seconds and without any wastage.
Book Size Min: 165mm (spine) - 115mm
Book Size Min: 310mm (spine) - 320mm
Spine Size:
Building on the proven features of its
predecessor the KB 2000S includes a more
powerful slitting device for better spine
preparation and increased glue penetration.
As more paper dust will be created from the
new slitting method we have incorporated a
vacuum collection system inside the cabinet
which is now an integral part of the machine.
An additional benefit of having the integral
cabinet is the ability to now fix the
compressor within it.
The glue drum has also been redesigned on
the KB 2000S in order to supply more glue to
the spine and therefore to ensure stronger
books.
3 sheets - 60mm
Glue for the KB2000S available
Pneumatics control the nipping and clamping
of the book and side gluing is achieved during
the gluing and clamping process.
from stock.
Documents from 4 sheets up to a maximum of
60mm can be bound. Unusually in a machine
of this size the KB 2000S can bind A4
landscape books.
The KB 2000S can successfully bind all types
of print and stocks due to the increased spine
preparation and the much improved 3 roller
glue system.
fax: 01908 692399
tel: 01908 608888
www.morgana.co.uk
27
Morgana Service, Parts &
Support
Parts and Consumables
Morgana has a thriving parts & consumables
business.
Service
We carry an extensive stock of parts and
consumables for our comprehensive range of
machines. Most parts and consumables can be
delivered next working day.
Morgana has always insisted on the very
highest standards of customer care.
Services such as free delivery, installation and
initial operator training, supported by on-site
and workshop warranty provisions ensure that
your investment is taken care of right from
the start.
Morgana consumables and parts supplies are
all of the best quality, with off-the-shelf
delivery to keep your investment productive.
To place your parts or consumables order
please contact our parts department on 01908
608888 or alternatively you can email us at
[email protected]
Service Contract
C
To care for your needs on maintenance, H&S
inspections and emergency visits, we offer
flexible contract and payment options or payas-you-go simplicity. 5-Star Cover is standard
on all new machines. Please contact the
Service Department for more details.
O
V
E
R
www.morgana.co.uk
Morgana service engineers are all highly
trained professionals who are passionate
about getting it right.
With vehicles carrying a wide array of parts,
latest mobile technology, route finding and
service management software, Morgana
expertise is quickly at your disposal
nationwide.
28
www.morgana.co.uk
tel: 01908 608888
fax: 01908 692399
Morgana Service, Parts
& Support
Installation
Our installation team is dedicated to ensuring
that your new machine is delivered on time
and effectively.
Our uniformed staff drive specialist vehicles
to ensure your new equipment travels safely.
The vehicles are equipped with satellite
navigation, tail lifts and the latest in stairclimbing equipment.
They have vast experience of all types of sites
and you can rest assured your new purchase
will be up and running in no time at all.
Comprehensive operator training will follow
by our installation team and backed up by our
team of country wide dedicated engineers.
If you need to relocate your equipment,
please give us a call.
We offer a relocation service to ensure your
valuable equipment is moved safely with
minimal disruption to your business.
A Genuine Commitment to
CUSTOMER CARE
fax: 01908 692399
tel: 01908 608888
www.morgana.co.uk
29
www.morgana.co.uk
tel: 01908 608888
fax: 01908 692399
fax: 01908 692399
tel: 01908 608888
www.morgana.co.uk
The guiding principle for
everyone at Morgana is
the pursuit of excellence.
This is at the core of
everything we do.
It is crucial to the way
we build relationships
with customers and to
the way we seek to
innovate, improve and to
offer the very best
finish
number 1 in digital print finishing
products at the best
prices.
Morgana Systems Ltd
Davy Avenue
Knowlhill
Milton Keynes
MK5 8HJ
United Kingdom
Tel: +44 (0)1908 608888
Fax: +44 (0)1908 692399
www.morgana.co.uk
[email protected]
*As part of our continued product
improvement plan, specifications and
information published here are subject
to change without notice.
All specifications are dependent on
application, type of stock, temperature,
RH and print engine used.
Specifications quoted were measured
on uncoated and unprinted stock.
E & OE.
MOR-CB04/10 ver 4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement